LG Electronics Flat Panel Television 1199LLGG3300 User Manual

LCD TV  
OWNER’S MANUAL  
LCD TV MODELS  
19LS4D  
32LG30  
32LG32  
37LG30  
42LG30  
42LG32  
*
**  
**  
**  
**  
**  
22LS4D  
*
32LG20  
37LG20  
42LG20  
19LG30  
22LG30  
26LG30  
**  
**  
**  
**  
**  
**  
32LG5  
***  
37LG50  
42LG50  
47LG50  
52LG50  
**  
**  
**  
**  
Please read this manual carefully before operating  
your TV.  
Retain it for future reference.  
Record model number and serial number of the TV.  
Refer to the label on the back cover and quote this  
information.  
Trade Mark of the DVB Digital Video  
Broadcasting Project (1991 to 1996)  
To your dealer when requiring service.  
ID Number(s): 5499: 22LS4D-ZD  
5507: 19LS4D-ZD  
Extended Owner’s Manual that contains advanced fea-  
tures of these LG TV-sets is located on CD-ROM in  
electronic version.  
5629: 32LG2000-ZA  
5630: 37LG2000-ZA  
5721: 26LG3050-ZA  
5631: 42LG2000-ZA  
5088: 19LG3000-ZA  
5080: 26LG3000-ZA  
5087: 37LG3000-ZA  
5090: 22LG3000-ZA  
5089: 32LG3000-ZA  
5086: 42LG3000-ZA  
To read it You need to open chosen files by using  
5085: 32LG5000-ZA  
5084: 37LG5000-ZA  
5083: 42LG5000-ZA  
5082: 47LG5000-ZA  
Personal Computer (PC) equipped with CD-ROM drive.  
5081: 52LG5000-ZA  
5385: 52LG5010-ZD  
5386: 47LG5010-ZD  
5387: 42LG5010-ZD  
5388: 37LG5010-ZD  
5389: 32LG5010-ZD  
5390: 52LG5020-ZB  
5391: 47LG5020-ZB  
5392: 42LG5020-ZB  
5393: 37LG5020-ZB  
5394: 32LG5020-ZB  
5395: 52LG5030-ZE  
5396: 47LG5030-ZE  
5397: 42LG5030-ZE  
P/NO: MFL34441652 (0901-REV01)  
Printed in Korea  
5398: 37LG5030-ZE  
5399: 32LG5030-ZE  
5671: 32LG5700-ZF  
5820: 19LG3050-ZA  
5818: 22LG3050-ZA  
5879: 19LG3060-ZB  
5880: 22LG3060-ZB  
5878: 32LG5600-ZB  
6511: 42LG3200-ZA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image shown may differ from your TV.  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Antenna Connection  
1
ANTENNA IN  
3
Power Cord  
PCMCIA  
EJECT  
ANTENNA IN  
AUDIO IN  
(RGB/DVI)  
CARD SLOT  
HDMI/DVI IN  
AV 1  
AV 2  
RS-232C IN  
RGB (PC) IN  
(CONTROL & SERVICE)  
COMPONENT IN  
VIDEO AUDIO  
Y
PB  
P
R
L
R
SERVICE  
ONLY  
AV 1 AV 2  
VCR Connection  
2
2
DVD/STB  
External equipment Setup  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
• Please read these safety precautions carefully before using the product.  
• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.  
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.  
PrecWaAuRtNiIoNGn in Installing the Product  
If you ignore the caution message, you may be slightly injured or the product may be damaged.  
CAUTION  
CAUTION  
Protect the power cord from physical or mechanical  
WARNING  
abuse, such as being twisted, kinked, pinched, closed in  
a door, or walked upon. Pay particular attention to plugs,  
wall outlets, and the point where the cord exits the  
appliance.  
Keep away from heat sources like electrical heaters.  
- Electrical shock, fire, malfunction or deformation may occur.  
Precautions in Moving the Product  
WARNING  
Do not use the product in damp place such as a bath-  
room or any place where it is likely to get wet.  
- This may cause a fire or could give an electric shock.  
Make sure to turn off the product.  
Make sure to remove all cables before moving the  
product.  
If you can smell smoke or other odors or hear a strange  
- You may be electrocuted or the product can be dam-  
sound unplug the power cord and contact the service  
aged.  
center.  
- If you continue to use without taking proper measures, elec-  
trical shock or fire can occur.  
CAUTION  
Do not shock the product when moving it.  
- You may be electrocuted or the product can be damaged.  
CAUTION  
Make the panel face forward and hold it with both  
hands to move.  
Install the product on a flat and stable place that  
has no risk of dropping the product.  
- If you drop the product, the damaged product can cause elec-  
tric shock or fire. Contact with the service center for repair.  
- If the product is dropped, you may be injured or the  
product may be broken.  
Precautions in Using the Product  
WARNING  
Keep the product away from direct sunlight.  
- The product can be damaged.  
Do not disassemble, repair or modify the product at  
your own discretion.  
- Fire or electric shock accident can occur.  
- Contact the service center for check, calibration or  
repair.  
Do not place the product in a built-in installation  
such as bookcase or rack.  
Electrical P-oVewnteilatrionRreequliraedt. ed Precautions  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to rain or moisture.  
ApparCatuAsUsThaIlOl nNot be exposed to dripping or  
splashing and no objects filled with liquids, such as  
vases, shall be placed on the apparatus.  
WARNING  
Make sure to connect the power cable to the ground-  
ed current.  
Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
- You may be electrocuted or injured.  
damaged in any way, such as power supply cord or plug  
is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normal-  
ly, or has been dropped.  
Do not touch the power plug with wet hands.  
Additionally, it the cord pin is wet or covered with  
dust, dry the power plug completely or wipe dust off.  
- You may be electrocuted due to excess moisture.  
Do not keep a still image on the screen for an  
extended period (e.g. by pausing a video) as the fixed  
image may remian visible on the screen. This is known  
as image burn. Image burn is not covered under the  
manufacturer’s warranty.  
During a thunder or lightning storm, unplug the  
power cable or signal cable.  
- You may be electrocuted or a fire can break out.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
FRONT PANEL CONTROLS  
Image shown may differ from your TV.  
If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.  
LCD TV Models :  
32/37/42LG20 , 26/32/37/42LG30 , 32/42LG32 , 32/37/42/47/52LG5  
**  
**  
**  
***  
P
PROGRAMME  
VOLUME  
+
-
Intelligent Sensor  
Adjusts picture according to  
the surrounding conditions.  
OK  
OK  
(32/37/42/47/52LG5  
only)  
***  
MENU  
MENU  
INPUT  
POWER  
INPUT  
Remote Control Sensor  
Power/Standby Indicator  
• illuminates red in standby mode.  
• illuminates blue when the TV is switched on.  
Power Indicator  
Note: You can adjust  
in the OPTION menu.  
LCD TV Models : 19/22LG30  
**  
MENU  
VOLUME  
PROGRAMME  
INPUT  
OK  
INPUT MENU OK  
-
+
P
LCD TV Models : 19/22LS4D  
*
MENU  
VOLUME  
PROGRAMME  
POWER  
INPUT  
OK  
Remote Control Sensor  
• illuminates green when the TV is switched on.  
INPUT  
OK  
VOL  
PR  
/I  
MENU  
Power/Standby Indicator  
• illuminates red in standby mode.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
BACK PANEL INFORMATION  
A
Image shown may differ from your TV.  
2
3
4
1
13  
COMPONENT  
IN  
OPTICAL  
DIGITAL  
AUDIO IN  
(RGB/DVI)  
USB IN  
AV 1  
AV 2  
AUDIO OUT  
SERVICE ONLY  
10  
5
HDMI/DVI IN  
2
RGB IN (PC)  
1(DVI)  
RS-232C IN  
(CONTROL & SERVICE)  
ANTENNA IN  
Except for  
32/37/42LG20 ,  
**  
5
6
7
8
9
32/42LG32  
**  
9
10  
5
2
S-VIDEO  
PCMCIA  
EJECT  
ANTENNA IN  
AUDIO IN  
CARD SLOT  
HDMI/DVI IN  
(RGB/DVI)  
AV 1  
AV 2  
11  
RS-232C IN  
RGB (PC) IN  
(CONTROL & SERVICE)  
COMPONENT IN  
VIDEO AUDIO  
AV IN 3  
H/P  
Y
P
B
P
R
L
R
12  
SERVICE  
ONLY  
7
8
6
13  
4
1
8
Power Cord Socket  
Component Input  
This TV operates on an AC power. The voltage is  
Connect a component video/audio device to  
these jacks.  
indicated on the Specifications page. Never  
attempt to operate the TV on DC power.  
9
10  
Antenna Input  
2
3
RGB/DVI Audio Input  
Connect RF antenna to this jack.  
Connect the audio from a PC or DTV.  
PCMCIA (Personal Computer Memory Card  
DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D )  
*
International Association) Card Slot  
Connect digital audio from various types of equipment.  
(This feature is not available in all countries.)  
Note: In standby mode, these ports do not work.  
11  
Audio/Video Input (Except for 19/22LS4D )  
*
4
5
Euro Scart Socket (AV1/AV2)  
Connect audio/video output from an external  
device to these jacks.  
Connect scart socket input or output from an  
external device to these jacks.  
S-VIDEO (Except for 19/22LS4D , 32/37/42LG20 ,  
*
**  
32/42LG32  
)
**  
HDMI Input  
Connect S-Video out from an S-VIDEO device.  
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)  
12  
13  
signal to HDMI/DVI port with DVI to HDMI cable.  
Headphone Socket (Except for 19/22LS4D  
,
*
32/37/42LG20 , 32/42LG32  
**  
)
**  
6
7
RGB IN (PC)  
Connect the headphone plug to this socket.  
Connect the output from a PC.  
SERVICE ONLY PORT  
RS-232C IN (CONTROL & SERVICE) PORT  
Connect to the RS-232C port on a PC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STAND INSTALLATION  
(LCD TV Models: 32/37/42LG20 26/32/37/42LG30 32/42LG32 , 32/37/42LG5  
)
***  
**,  
**,  
**  
A
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the  
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt  
can deviate from abrasion of the tightening part of the bolt.  
Carefully place the TV screen side down on a  
Assemble the TV as shown.  
1
3
cushioned surface to protect the screen from  
damage.  
Fix the 4 bolts securely using the holes in the  
back of the TV.  
Stand Body  
Assemble the parts of the  
with  
4
2
Cover Base  
the  
of the TV.  
Stand Body  
Cover Base  
(Only 19/22LG30 )  
**  
Stand Body  
Cover Base  
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.  
1
2
STAND BODY  
COVER BASE  
STAND BODY  
Assemble the parts of the  
with  
of the TV. Insert the  
into a  
COVER BASE  
until clicking sound.  
Assemble the TV as shown.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
STAND INSTALLATION  
DETACHING STAND  
(Only 19/22LS4D )  
*
(Only 19/22LS4D )  
*
Image shown may differ from your TV.  
Place the tv with its front facing downward on a  
Carefully place the TV screen side down on a  
1
1
2
cushion or soft cloth.  
cushioned surface to protect the screen from  
damage.  
Cover Base  
Pull the  
backward during pressing  
2
Stand Body  
a button on the  
.
Hinge Body  
Hold the  
and bend it upward.  
Hinge Body  
Cover Base  
Hold the  
and pull with shake it  
3
4
Stand Body  
backward to separate from the  
.
Stand Body  
Insert the  
sound.  
into the TV until clicking  
3
Stand Body  
Hold the  
and bend it upward.  
Stand Body  
Stand Body  
Assemble the parts of the  
with  
4
Cover Base  
the  
of the TV.  
Pull stand body to separate from the TV during  
pressing 2 latches.  
5
Cover Base  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK COVER FOR WIRE ARRANGEMENT  
L1CD TV Models:  
1
LCD TV Models :  
32/37/42LG20 , 26/32/37/ 42LG30 ,  
**  
**  
19/22LS4D , 19/22LG30  
*
**  
32/42LG32 , 32/37/42/47/52LG5  
**  
***  
Connect the cables as neces-  
Connect the cables as necessary.  
sary.  
To connect additional equipment, see the  
External Equipment Setup section.  
To connect additional equip-  
ment, see the External  
Equipment Setup section of  
the manual.  
CABLE MANAGEMENT CLIP  
Open the  
as  
2
shown and manage the cables.  
Install the CABLE MANAGEMENT CLIP as shown.  
2
CABLE MANAGECMABELNE MTACNALGIEPMENT CLIP  
as  
(Only 19/22LS4D )  
*
Fit the  
shown.  
3
(Only 19/22LG30 )  
**  
How to remove the cable management clip  
CABLE  
First, press the cable management. Hold the  
Hold the CABLE MANAGEMENT CLIP with both  
MANAGEMENT CLIP  
upward.  
with both hands and pull it hands and pull it backward.  
(Only 19/22LS4D )  
(Only 19/22LG30 )  
*
**  
!
NOTE  
Do not use the CABLE MANAGEMENT CLIP to lift the TV.  
G
- If the TV is dropped, you may be injured or the TV may be damaged.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.  
You should purchase necessary components to fix the TV to the wall on the market.  
Position the TV close to the wall to avoid the possibility of it falling when pushed.  
The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the  
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This  
will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.  
1
1
2
2
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.  
(If your TV has bolts in the eyebolts, loosen these bolts.)  
1
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.  
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the  
wall.  
2
3
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the  
TV.  
3
!
NOTE  
When moving the TV undo the cords first.  
G
Use a platform or cabinet strong and large enough to support the size and weight of the TV.  
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.  
G
G
The TV can be installed in various ways such as on a wall, or on a desktop etc.  
The TV is designed to be mounted horizontally.  
EARTHING  
Ensure that you connect the earth wire to prevent possible  
Power Supply  
breaker  
electric shock. If grounding methods are not possible, have a  
qualified electrician install a separate circuit breaker.  
Circuit  
Do not try to earth the TV by connecting it to telephone  
wires, lightening rods or gas pipes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESKTOP PEDESTAL INSTALLATION  
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.  
4 inches  
4 inches  
4 inches  
4 inches  
R
Attaching the TV to a desk (Only 32/37/42LG20 , 26/32/37/42LG30 , 32/42LG32 , 32/37/42LG5  
)
***  
**  
**  
**  
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing  
injury or damaging the product. Use only an attached screw.  
Stand  
1-Screw  
(provided as parts of the product)  
Desk  
WARNING  
!
To prevent TV from falling over, the TV should be securely attached to the floor/wall per  
installation instructions. Tipping, shaking, or rocking the machine may cause injury.  
G
WALL MOUNT: HORIZONTAL INSTALLATION  
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall  
mounting bracket of LG brand when mounting the TV to a wall.  
4 inches  
4 inches  
4 inches  
4 inches  
4 inches  
Not using the desk-type stand (Except for 19/22LS4D )  
*
Image shown may differ from your TV.  
When installing the wall-mounted unit, use the protection cover for  
PROTECTION COVER  
desk-type stand installation. Insert the  
the TV until clicking sound.  
into  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
To prevent damage do not connect to the mains outlet until all connections are made between the devices.  
ANTENNA CONNECTION  
For optimum picture quality, adjust antenna direction.  
An antenna cable and converter are not supplied.  
Multi-family Dwellings/Apartments  
Wall  
(Connect to wall antenna socket)  
ANTENNA IN  
Antenna  
Socket  
RF Coaxial Wire (75 ohm)  
Outdoor  
Antenna  
(VHF, UHF)  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
UHF  
ANTENNA IN  
Antenna  
Signal  
Amplifier  
VHF  
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the  
antenna as shown above.  
If signal needs to be split for two TVs,use an antenna signal splitter for connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
REMOTE CONTROL KEY FUNCTIONS  
When using the remote control, aim it at the remote control sensor on the TV.  
5
5
6
POWER  
TV  
D/A  
INPUT  
1
6
TV/RADIO TEXT  
I/II  
MUTE  
2
1
4
2
5
3
6
7
3
7
8
0
9
LIST  
Q.VIEW  
10  
MENU  
AV MODE  
8
or  
3
OK  
8
7
9
INFO  
i
GUIDE  
EXIT  
RETURN  
4
VOL  
PR  
4
*
FAV  
9
6
INPUT  
10  
External input mode rotate in regular sequence.  
Switches the TV on from standby.  
1
7
8
MODE  
GUIDE  
Shows programme schedule.  
Selects the remote operating modes.  
2
3
THUMBSTICK(Up/Down/LeftRight)  
Q. MENU  
Allows you to navigate the on-screen menus and  
Select the desired quick menu source.  
adjust the system settings to your preference.  
MENU  
OK  
Selects a menu.  
Accepts your selection or displays the current mode.  
Clears all on-screen displays and returns to TV view-  
ing from any menu.  
9
Programme UP/DOWN  
Selects a programme.  
4
5
VOLUME UP /DOWN  
Adjusts the volume.  
10 Q.VIEW  
Returns to the previously viewed programme.  
POWER  
Switches the TV on from standby or off to standby.  
Installing Batteries  
Open the battery compartment cover on the back and install the batteries matching  
correct polarity (+with +,-with -).  
Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.  
Close cover.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
TURNING ON THE TV  
- When your TV is turned on, you will be able to use its features.  
Firstly, connect the power cord correctly.  
1
2
At this stage, the TV switches to standby mode.  
r
In standby mode to turn TV on, press the  
/ I, INPUT or P  
(or PR  
) button on the TV or  
D E  
press the POWER, INPUT, D/A, P  
(or PR + -) or NUMBER button on the remote control and the  
TV will switch on.  
Initializing setup  
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the  
Language, Select Mode, Country, Time Zone, Auto programme tuning.  
Note:  
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.  
b. Press the BACK or RETURN button to change the current OSD to the previous OSD.  
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work,  
depending on the DTV broadcasting environment.  
d. "Home” mode is the optimal setting for home environments, and is the TV's default mode.  
e. "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data, “In  
Store” mode initializes the product to the image quality set by us after a certain period of time.  
f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.  
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION  
The installation guide menu appears on the TV screen when it is switched on for the first time.  
2
1
OK  
OK  
Select your country.  
Select your desired language.  
* If you want to change Language/ Country selection  
1
3
MENU  
Select your desired language or  
country.  
OK  
OK  
OPTION  
Select  
Select  
.
4
2
Menu Language  
.
OK  
Save it.  
Country  
or  
!
NOTE  
If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On  
G
Screen Display) the installation menu will continuously appear until the set up is completed whenever the  
TV is switched on  
If you select the wrong local country, teletext may not appear correctly on the screen and some problems  
G
may occur during teletext operation.  
The CI (Common Interface) function may not be applied based on country broadcasting circumstances.  
DTV mode control buttons may not function based on country broadcasting circumstances.  
In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending  
G
G
G
on digital broadcasting circumstances.  
G
Download from Www.Somanuals.com. All Manuals Search And Download.  
ON SCREEN MENUS SELECTION AND ADJUSTMENT  
(
)
Your TV's OSD On Screen Display may differ slightly from what is shown in this manual.  
Move  
OK  
SETUP  
Move  
OK  
PICTURE  
Auto tuning  
Manual tuning  
Programme Edit  
Booster  
Aspect Ratio  
Picture Mode  
: 16:9  
: Vivid  
• Backlight  
100  
100  
50  
70  
70  
0
: On  
• Contrast  
• Brightness  
• Sharpness  
• Colour  
Software Update : Off  
Diagnostics  
CI Information  
R
G
• Tint  
E
Move  
OK  
AUDIO  
Auto Volume  
Balance  
: Off  
L
-
R
+
0
SETUP  
TIME  
PICTURE  
OPTION  
AUDIO  
Sound Mode : Standard  
120Hz  
0
0
0
0
0
-
-
+
+
• 200Hz  
• 500Hz  
• 1.2KHz  
• 3KHz  
-
-
+
+
LOCK  
E
Move  
OK  
Move  
OK  
Move  
OK  
TIME  
OPTION  
LOCK  
Clock  
Menu Language : English  
Audio Language : English  
Subtitle Language : English  
Lock System  
Set Password  
: Off  
Off Time  
On Time  
: Off  
: Off  
Block Programme  
(
)
Sleep Timer : Off  
Hard of Hearing  
Off  
Parental Guidance : Off  
Auto Sleep : Off  
Country  
:UK  
Time Zone : Canary GMT  
Input Label  
SIMPLINK  
Key Lock  
: Off  
: Off  
E
1
2
3
MENU  
Display each menu.  
Select a menu item.  
OK  
OK  
Move to the pop up menu.  
Press the MENU button to return to normal TV viewing.  
Press the RETURN button to move to the previous menu screen.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
AUTO PROGRAMME TUNING  
Use this to automatically find and store all available programmes.  
When you start auto programming in digital mode, all previously stored service information will be deleted.  
Move  
OK  
Move  
OK  
SETUP  
SETUP  
Auto tuning  
Auto tuning  
Auto tuning  
Auto tuning  
Manual tuning  
Programme Edit  
Booster  
Manual tuning  
Programme Edit  
Booster  
All service-information will be updated.  
Continue?  
SECAM L Search  
: On  
: On  
Software Update : Off  
Diagnostics  
Software Update : Off  
Diagnostics  
Yes  
No  
CI Information  
CI Information  
1
2
MENU  
Select SETUP.  
Use NUMBER buttons to input a 4-digit  
button. Otherwise select NO.  
password in Lock System On.  
If you wish to keep on auto tuning select YES  
OK  
Select Auto Tuning.  
using the  
button. Then, press the OK  
3
4
OK  
OK  
Select Yes.  
Run Auto tuning.  
Press the MENU button to return to normal TV viewing.  
Press the RETURN button to move to the previous menu screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
MAINTENANCE  
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.  
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.  
Cleaning the Screen  
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water  
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it  
1
Cleatnoinwigpetthhee sCcraeebni.net  
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.  
2
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.  
A
Do not to use a wet cloth.  
Extended Absence  
CAUTION  
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power  
G
cord to protect against possible damage from lightning or power surges.  
TO VIEW THE USER'S GUIDE ON THE CD-ROM  
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.  
The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader.  
If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG"  
double-click your language.  
Open the folder "ACRORD"  
To view the User's guide  
The User's guide files are included in the supplied CD-ROM.  
Load the supplied CD-ROM into the CD-ROM drive of your PC.  
After a while, the web page of the CD-ROM will open automatically.(Windows users only)  
TIORf ptOheen wU"MebyBpcaLogmEepduSoteeHrs"nOot aOppTearIaNutoGmatically, open the User's guide file directly.  
Open the folder "LG"  
Double click the "index.htm" file.  
The TV does not operate properly.  
A
Check to see if there is any object between the TV and the remote control causing  
an obstruction. Ensure you are pointing the remote control directly at the TV.  
Ensure that the batteries are installed with correct polarity (+ to +, - to -).  
Ensure that the correct remote operating mode is set: TV, VCR etc.  
Install new batteries.  
The remote control  
A
A
A
does not work  
A
A
A
Is the sleep timer set?  
Power is suddenly  
turned off  
Check the power control settings. Has the Power supply been interrupted.  
Is Auto sleep activated on this station?  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
The video function does not work.  
A
A
A
A
A
Check whether the TV is switched on.  
Try another channel. The problem may be with the broadcast.  
Is the power cord inserted correctly into the mains?  
Check your antenna direction and/or location.  
No picture &No sound  
Test the mains outlet by plugging another TV into the same outlet.  
Picture appears slowly  
A
This is normal, the image is muted during the TV startup process. Please contact  
your service centre, if the picture has not appeared after five minutes.  
after switching on  
A
A
A
A
A
Adjust Colour in menu option.  
Allow a sufficient distance between the TV and the VCR.  
Try another channel. The problem may be with the broadcast.  
Are the video cables installed properly?  
No or poor colour  
or poor picture  
Activate any function to restore the brightness of the picture.  
Horizontal/vertical bars  
or picture shaking  
A
Check for local interference such as an electrical appliance or power tool.  
A
A
A
Station or cable channel experiencing problems, tune to another station.  
Station signal is weak, reposition the antenna to receive weaker stations.  
Check for sources of possible interference.  
Poor reception on  
some channels  
Lines or streaks  
in pictures  
A
Check antenna (Change the position of the antenna).  
Check HDMI cable over version 1.3.  
A
No picture  
If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no  
screen display. In this case use the latest cables that support HDMI version 1.3.  
when connecting HDMI  
The audio function does not work.  
A
Press the VOLUME button.  
A
A
A
Sound muted? Press MUTE button.  
Picture OK & No sound  
Try another channel. The problem may be with the broadcast.  
Are the audio cables installed properly?  
No output from one  
of the speakers  
A
A
Adjust Balance in menu option.  
Unusual sound from  
inside the TV  
A change in ambient humidity or temperature may result in an unusual noise  
when the TV is switched on or off and does not indicate a fault with the TV.  
No sound when  
connecting HDMI or  
A
A
Check HDMI cable over version 1.3.  
Check USB cable over version 2.0.  
*This feature is not available for all models.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
There is a problem with PICTURE settings.  
When the user changes  
the picture settings, the  
TV automatically converts  
back to the initial settings  
after a certain period of  
A
In Store  
It means that the TV is currently set to  
mode.  
Home  
To switch to  
mode you should do the followings:  
OPTION Factory Reset Yes  
From the TV Menu, choose  
->  
->  
(wait for a  
WELCOME  
few seconds for the TV to download again) -> OSD "  
" appears ->  
OK  
Language  
Home  
Press  
button -> Choose  
-> Choose  
-> Select your  
WEIGtHimeT.  
Country  
Time Zone  
OK  
and  
-> Press  
button. Program search will begin  
OK  
automatically (You can stop the search by pressing the  
button). Now, you  
Home  
have completed switching to the  
mode.  
19LS4D  
*
22LS4D  
19LG30  
**  
*
MODELS  
19LG3000-ZA  
19LS4D-ZD  
22LS4D-ZD  
19LG3050-ZA  
19LG3060-ZB  
with stand  
Weight  
5.1 kg / 11.3 lbs  
6.1 kg / 13.5 lbs  
5.02 kg / 11.1 lbs  
without stand  
4.6 kg / 10.2 lbs  
5.7 kg / 12.6 lbs  
4.76 kg / 10.5 lbs  
32LG30  
**  
26LG30  
**  
22LG30  
**  
MODELS  
32LG3000-ZA  
26LG3000-ZA  
22LG3000-ZA  
22LG3050-ZA  
22LG3060-ZB  
26LG3050-ZA  
32LG3030-ZA  
with stand  
Weight  
Weight  
5.6 kg / 12.4 lbs  
10.1 kg / 22.3 lbs  
13.4 kg / 29.6 lbs  
without stand  
5.34 kg / 11.8 lbs  
8.6 kg / 19.0 lbs  
11.9 kg / 26.3 lbs  
37LG30  
**  
32LG20  
37LG20  
42LG30  
**  
**  
**  
MODELS  
37LG3000-ZA  
32LG2000-ZA  
37LG2000-ZA  
42LG3000-ZA  
37LG3030-ZA  
42LG3030-ZA  
with stand  
18.8 kg / 41.5 lbs  
23.6 kg / 52.1 lbs  
13.4 kg / 29.6 lbs  
18.8 kg / 41.5 lbs  
without stand  
16.2 kg / 35.7 lbs  
21.0 kg / 46.3 lbs  
11.9 kg / 26.3 lbs  
42LG3200-ZA  
16.2 kg / 35.7 lbs  
32LG5  
***  
42LG20  
**  
32LG32  
**  
42LG32  
**  
32LG5000-ZA  
42LG2000-ZA  
32LG3200-ZA  
32LG5010-ZD  
MODELS  
32LG5020-ZB  
32LG5030-ZE  
32LG5600-ZB  
32LG5700-ZF  
with stand  
Weight  
23.6 kg / 52.1 lbs  
13.4 kg / 29.6 lbs  
23.6 kg / 52.1 lbs  
14.1 kg / 31.1 lbs  
without stand  
21.0 kg / 46.3 lbs  
11.9 kg / 26.3 lbs  
21.0 kg / 46.3 lbs  
12.6 kg / 27.8 lbs  
37LG50  
42LG50  
47LG50  
52LG50  
**  
**  
**  
**  
37LG5000-ZA  
42LG5000-ZA  
47LG5000-ZA  
52LG5000-ZA  
MODELS  
37LG5010-ZD  
42LG5010-ZD  
47LG5010-ZD  
52LG5010-ZD  
37LG5020-ZB  
37LG5030-ZE  
42LG5020-ZB  
42LG5030-ZE  
47LG5020-ZB  
47LG5030-ZE  
52LG5020-ZB  
52LG5030-ZE  
with stand  
Weight  
18.3 kg / 40.4 lbs  
26.2 kg / 57.8 lbs  
29.2 kg / 64.4 lbs  
39.5 kg / 87.1 lbs  
without stand  
15.6 kg / 34.4 lbs  
23.5 kg / 51.8 lbs  
24.6 kg / 54.3 lbs  
34.9 kg / 77.0 lbs  
The specifications shown above may be changed without prior notice for quality improvement.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(UK only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Portable Radio WS 7078UF User Manual
Land Pride Lawn Mower FDR3590 User Manual
Lenovo Server 6444 User Manual
Life Fitness Home Gym 95L User Manual
Magnavox Flat Panel Television 26MF321B User Manual
Magnetek Computer Hardware Quattro DC Elevator Drive User Manual
Makita Cordless Drill DA3000D User Manual
Marantz Stereo Amplifier PM4200 User Manual
Mellerware Ice Maker ICM001A User Manual
Metrologic Instruments Scanner MS9530 Series User Manual