V1940MH_EVENT_ENG
DVD Player &
Video Cassette Recorder
OWNER’S MANUAL
MODEL : V194H
Before connecting, operating or adjusting this
product, please read this owner’s manual
carefully and completely.
For service/
support Call:
Toll Free Number
1-800-243-0000
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
CAUTION:
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa-
tion, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and operating
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience recepta-
cles, and the point where they exit from the product.
instructions should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use
instructions should be retained for future reference.
11. Only use attachments/accessories specified by the
manufacturer.
3. Heed all warnings. - All warnings on the product and in
the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instruc-
tions should be followed.
5. Do not use this product near water. – For example: near
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement; or near a swimming pool; and other areas
located near water.
6. Clean only with dry cloth. – Unplug this product from the
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with appara-
tus. When a cart is used, use caution when moving
the cart/product combination to avoid injury from
tip-over.
wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions. Slots and
-
openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it
from over- heating. The openings should never be blocked
by placing the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ven-
tilation is provided or the manufacturer’s instructions have
been adhered to.
13. Unplug this product during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the product, the product has been
exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operations - VCR . . . . . . . . . . . . . .21-27
Introduction . . . . . . . . . . . . . . . . . . . .5-10
Moisture Condensation . . . . . . . . . . . . . . . . . .5
Symbol Used in this Manual . . . . . . . . . . . . .5
VCR Tape Playback . . . . . . . . . . . . . . . . .21-22
Basic Instructions . . . . . . . . . . . . . . . . . . . . .21
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .21
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .21
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Still Picture and Frame-by-Frame Playback .21
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .22
CM SKIP (Commercial Skip) . . . . . . . . . . . . .22
VHS Hi-Fi Stereo/MTS Broadcast . . . . . . . . .22
Hi-Fi Stereo Audio Sound . . . . . . . . . . . . . . .22
MTS (Multi-Channel TV Sound) . . . . . . . . . .22
VCR Tape Recording . . . . . . . . . . . . . . . .23-26
Basic Instructions . . . . . . . . . . . . . . . . . . . . .23
Timer Recording . . . . . . . . . . . . . . . . . . .23-24
Instant Timer Recording . . . . . . . . . . . . . . .25
Recording from External Components . . . . .25
Copying from DVD to VCR . . . . . . . . . . . . .26
On-Screen Display - VCR . . . . . . . . . . . . . . .26
About the
Symbol Display . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5
About the Remote Control . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . .6
Regional code . . . . . . . . . . . . . . . . . . . . . . . .6
Selecting the Viewing Source . . . . . . . . . . . . .6
Card usable on this unit . . . . . . . . . . . . . . . . .7
Using Memory Card . . . . . . . . . . . . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Preparation . . . . . . . . . . . . . . . . . . .10-20
Connecting an Antenna or Cable TV . . . . . . .11
Basic TV Connections . . . . . . . . . . . . . . .11-12
Optional TV Connections . . . . . . . . . . . . . . .12
Resolution setting . . . . . . . . . . . . . . . . . . . . .12
HDMI connection . . . . . . . . . . . . . . . . . . . . . .13
Connection to an amplifier . . . . . . . . . . . . . .14
Additional VCR Information . . . . . . . . . . . . .27
VCR Auto Play System . . . . . . . . . . . . . . . . .27
S-VHS Quasi Playback (SQPB) . . . . . . . . . .27
Easy Information . . . . . . . . . . . . . . . . . . . . .27
Operations - DVD . . . . . . . . . . . . . .28-34
Initial Settings - VCR . . . . . . . . . . . . . . . .15-16
General Operation . . . . . . . . . . . . . . . . . . . .15
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . .15
• Manual Clock Set . . . . . . . . . . . . . . . . . . .15
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .15
TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• Auto Channel Programming . . . . . . . . . .16
• To Add or Erase Channels . . . . . . . . . . . .16
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• FUNCTION OSD . . . . . . . . . . . . . . . . . .16
• AUDIO MODE . . . . . . . . . . . . . . . . . . . . .16
• BROADCAST TYPE
Playback Setup . . . . . . . . . . . . . . . . . . . . . . .28
General Features . . . . . . . . . . . . . . . . . . .28-29
Additional Features . . . . . . . . . . . . . . . .29-30
Playing an Audio CD or MP3/WMA Disc . . .31
Programmed Playback . . . . . . . . . . . . . . . .31
Viewing a JPEG file . . . . . . . . . . . . . . . . . . .32
Playing a DivX Movie file . . . . . . . . . . . . . . . .33
Playing a DVD VR format Disc . . . . . . . . . . .34
Maintenance and Service . . . . . . . . . . . . . . .34
Reference . . . . . . . . . . . . . . . . . . . .35-39
Controlling your TV with the
supplied remote . . . . . . . . . . . . . . . . . . . . . .35
(STEREO/SAP/MONO) . . . . . . . . . . . . . .16
• AUDIO OUTPUT
(STEREO/LEFT/RIGHT) . . . . . . . . . . . . .16
Displaying Disc Information on-screen . . . .17
Language Codes List . . . . . . . . . . . . . . . . . .36
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .36
Troubleshooting . . . . . . . . . . . . . . . . . . .37-38
Initial Settings - DVD . . . . . . . . . . . . . . . .17-20
General Operation . . . . . . . . . . . . . . . . . . . .17
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .18
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .18
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
LOCK (Parental Control) . . . . . . . . . . . . . . .19
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . .39
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future refer-
ence.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
This manual provides information on the operation
and maintenance of your DVD+VCR. Should the unit
require service, contact an authorized service loca-
tion.
Cleaning Discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Moisture Condensation
Never operate the DVD+VCR immediately after mov-
ing it from a cold location to a warm location. Leave it
for two or three hours without operating it. If you use
the DVD+VCR in such a situation, it may damage
discs/tapes and internal parts.
Symbol Used in this Manual
Note:
Indicates special notes and operating
features.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Tip:
Indicates tips and hints for making the task
easier.
A section whose title has one of the following sym-
bols is applicable only to the disc represented by the
symbol.
About the Remote Control
Operation Range
ALL
Point the remote control at the remote sensor and
press the buttons.
All discs listed below
DVD
DVD and finalized DVD R/RW
Distance: About 23 ft (7 m) from the front of the
VCD
Video CDs
remote sensor.
ACD
Audio CDs
Angle:
About 30° in each direction of the front of the
remote sensor.
MP3
MP3 files
Battery installation
Detach the battery cover on the rear of
WMA
WMA files
DivX
DivX files
the remote control, and insert two
(R03/AAA) size batteries with 3 and #
aligned correctly.
About the
Symbol Display
“
” may appear on your TV display during opera-
Caution: Do not mix old and new batteries and
never mix different types of batteries such as stan-
dard, alkaline, etc.
tion and indicates that the function is not permitted by
this unit or the disc.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyright-
ed material without permission.
This product features the copy protection function
developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and
playing the pictures of these discs picture noise will
appear. This product incorporates copyright protec-
tion technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
Audio CD and Video CD
(8 cm / 12 cm disc)
In addition, this unit plays Memory Card, DVD-R,
DVD+R, DVD-RW, DVD+RW, SVCD, and CD-R /
CD-RW that contains audio titles, MP3, WMA, and/or
JPEG, DivX files.
This indicates a product feature that is
capable of playing DVD-RW discs recorded
with Video Recording format.
Corporation, and is intended for home and other limit-
ed viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or dis-
assembly is prohibited.
Notes:
•
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD R/RW) disc
itself, some CD-R/RW (or DVD R/RW) discs
cannot be played on the unit.
Notice for Progressive Scan Use
•
•
Only plays if DVD-RW is recorded in Video mode
and has been finalized.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET COM-
PATIBILITY WITH THIS MODEL 525p DVD+VCR,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
• This DVD+VCR requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality. Pre-recorded
DVDs are automatically set to these standards.
There are many different types of recordable disc
formats (including CD-R containing MP3 or WMA
files) and these require certain pre-existing condi-
tions (see above) to ensure compatible playback.
Selecting the Viewing
Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
•
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display
window lights and output source of DVD deck is
viewed on the TV screen.
Regional code
This unit has a regional code printed on the rear of
the unit. This unit can play only DVD discs labelled
same as the rear of the unit or “ALL”.
•
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display
window lights and output source of VCR deck is
viewed on the TV screen.
Notes on Regional Codes
•
Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD+VCR’s regional
code or the disc cannot play.
Notes:
•
If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD
mode automatically.
•
If you try to play a DVD with a different region
code from your player, the message “Check
Regional Code” appears on the TV screen.
•
If you insert a cassette tape without prevention
tab while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Card useable on this unit
Using Memory Card
•
•
•
•
•
•
•
•
Compact Flash Card (CF)
Micro Drive (MD)
1. Insert a memory card.
2. Press MEMORY on the Front panel while in DVD
Secure Digital Card (SD)
Multi Media Card (MMC)
eXtreme Digital picture Card (xD)
Memory Stick (MS)
mode.
The Memory Card slot choice menu appears on
the TV screen.
Memory Stick Pro (MS-Pro)
Compatible with: FAT 12, FAT 16, or FAT 32
•
Only use the memory cards recommended above.
Regarding Write Protect
For cards that have a write protect switch, if the
switch is on it will not be possible to write, erase or
format the card.
3. Use v/V to select the desired Memory Card slot
then press ENTER.
The PHOTO, MUSIC or MOVIE menu appears on
the TV screen.
Inserting/Removing the Memory Card
4. Press RETURN to return to the Memory Card slot
choice menu.
Note:
For details on each operation item, refer to relevant
pages.(See page 31-33)
Insert CF, MD card
Insert SD, MMC, xD,
MS, or MS-Pro card
Inserting the card: Insert straight-in until it fits into
place.
Removing the card: Withdraw the card carefully.
Notes:
ꢀ Keep the memory card out of reach of children.
If swallowed, seek medical advice immediately.
ꢀ Some memory cards may not work in this unit,
depending on the formatting.
ꢀ Do not extract the memory card while operating.
Battery installation
About the Remote Control
Detach the battery cover on the rear
of the remote control, and insert two
(R03/AAA) size batteries with 3 and
# aligned correctly.
Operation Range
Point the remote control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
Do not mix old and new batteries and never
mix different types of batteries such as stan-
dard, alkaline, etc.
remote sensor.
Angle:
About 30° in each direction of the front of
the remote sensor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c
d
e
DVD
VCR
REC
PM
TV
f g h i
j k lmnop q
a
b
c
d
e
f
1 POWER
The VCR deck is selected.
VCR
Switches the DVD+VCR ON and OFF.
DVD+VCR is Recording.(VCR part only)
Indicates PM time. (AM is not displayed.)
Lights when TV mode is active.
REC
PM
Disc Tray (DVD deck)
Insert a disc here.
Z DVD
Opens or closes the disc tray.
TV
Cassette Compartment (VCR deck)
Insert a video cassette here.
Indicates total playing time,
elapsed time, remaining time
or current deck status
Z VCR
Ejects the tape in the VCR deck.
(Playback, Pause, etc).
MEMORY CARD SLOT
Insert a memory card
(CF, MD, MMC, SD, MS, xD, MS-Pro).
k
l
Remote Sensor
Point the DVD+VCR remote control here.
DVD/VCR (output select)
Select one of your output sources to view on the TV
screen between DVD and VCR.
g
h
MEMORY CARD
Accesses the menu for memory card.
CH (V/v)
m
n
x
To scan up or down through memorized channels.
Stops playback of the disc or tape.
i
RESOLUTION
You can change the resolution depending on your TV.
- HDMI mode : You can switch among the 480p, 720p
or 1080i resolution.
./m
- DVD: Skip to beginning of current chapter or track,
press twice in quick successions to go to previous
chapter or track. Press and hold button for about two
seconds to search backward.
- Component mode : You can switch among 480i,
480p, 720p or 1080i resolution.
- VCR: Rewinds the tape during the stop mode or for
fast reverse picture search.
j
Display Windows
The DVD deck is selected.
DVD
o
p
N
Starts playback of a disc or tape.
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
M/>
DVD: Skip to next chapter or track. Press and hold for
two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or
for fast forward picture search.
Indicates when the Progressive scan is
active.
[P]
Indicates repeat mode.
q
LINE2 (VIDEO/AUDIO (L/R))
Connect to the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
DVD+VCR is in timer recording or a timer
recording is programmed (VCR part only).
A cassette is in the VCR deck.
Child Lock is engaged.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
TV Control Buttons (see p. 35)
Switches DVD+VCR ON and OFF.
DVD
DISPLAY
Accesses On-Screen Display.
Select the DVD+VCR function
mode to DVD.
VCR
Select the DVD+VCR function
mode to VCR.
OPEN/CLOSE
Opens and closes the disc tray.
CLK/CNT
Switches between the clock,
tape counter and tape remain-
ing modes on the display.
F
G
D
E
Selects menu options.
CH/TRK(+/-)
Selects VCR channels.
Adjusts manually the tape’s pic-
ture onscreen.
EJECT
Ejects the tape in the VCR deck.
0-9
Selects numbered options in a
menu.
ENTER/OK
Confirms menu selections.
Displays functions on the TV
screen.
TV/VCR
To view channels selected by the
VCR tuner
DISC MENU
Accesses menu on a DVD disc.
or by the TV tuner.
SETUP/MENU
Accesses or removes DVD
Setup menu and VCR menu.
INPUT
Selects the VCR deck’s source
(Tuner, LINE 1, or LINE 2).
RETURN
BACKWARD / FORWARD
(m / M)
DVD: Search backward or forward.
VCR: Rewinds/Advances the tape
during the STOP mode, for fast back-
ward/forward picture search.
Removes the setup menu.
Displays the menu of a video
CD with PBC.
AUDIO
Selects an audio language
(DVD) or an audio channel
(VCD).
SKIP (. / >)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback or recording
temporarily. Press repeatedly for
frame-by-frame playback.
SUBTITLE
Selects a subtitle language.
ANGLE
Selects a DVD camera angle, if
available.
ZOOM
Enlarges DVD video image.
REC/ITR (O)
Starts recording. Press repeat-
edly to set the recording time.
PLAY (N)
Starts playback.
STOP ( Á )
Stops playback or recording.
LOCK
Locks/unlocks front panel but-
tons.
MARKER
Marks any point during playback.
TITLE
Displays the disc’s Title menu, if
available.
SEARCH
Displays Marker Search menu.
PROGRAM
Places a track on the program
list.
CLEAR
Removes a mark on the Marker
Search menu.
REPEAT
RESOLUTION
Repeat chapter, track, title or all.
You can change the resolution
depending on your TV.
RANDOM
Plays tracks in random order.
* This button is not used.
CM SKIP
Fast forwards picture search
through 30 seconds of recording.
A-B/
Repeats sequence between two
points (A and B).
SPEED
Selects recording speed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
a bcde
f
g
h
i j
k
a
b
ANT.IN
g
RF. OUT
Connect the VHF/UHF/CATV antenna to this terminal.
Connect to a TV with RF coaxial inputs.
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) h COAXIAL (DIGITAL AUDIO OUT jack)
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
(DVD OUT)
Connect to digital (coaxial) audio equipment.
c
d
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
i
j
S-VIDEO OUT (DVD OUT)
Connect to a TV with video and audio inputs.
Connect to a S-Video Input on TV.
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
OPTICAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (optical) audio equipment.
e
f
AUDIO OUT (Left/Right) (DVD OUT)
k
HDMI OUT
HDMI output providing a high quality interface for
digital audio and video.
Connect to a TV or other equipment with audio inputs.
AC Power Cord
Plug into the power source.
Preparation
Depending on your TV and other equipment there are various ways you can connect the
player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec-
essary for additional connection information.
Notes:
•
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units
away from each other or turn off the unit after removing the disc.
•
•
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection
system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To view or record a CATV channel
Connecting an Antenna
or Cable TV
1
2
3
Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
Set the DVD+VCR channel selector to the cable
output channel. (Example: CH3)
a
Antenna:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your DVD+VCR. If your antenna cable is
flat connect it to a 300-ohm to 75-ohm antenna adap-
tor (not supplied) and slip the adaptor over the
ANT.IN jack. Don’t attempt to screw it into to the
DVD+VCR.
Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one pro-
gram while viewing another.
•
If you are using a cable box to tune channels, it is
not necessary to do Auto Channel Set.
b
Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the DVD+VCR. If a
converter is required connect a coaxial cable from the
wall jack to the IN connector on the converter, and a
coaxial cable from the OUT connector on the convert-
er to the ANT.IN on your DVD+VCR. This cable
hookup permits both TV and DVD+VCR operation.
Basic TV Connections
Make one of the following connections, depending on
the capabilities of your TV.
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
a
Antenna
Antenna
How to set the DVD+VCR’s RF output
channel
1. When the DVD+VCR is turned off, press and hold
CH (V/v) on the front panel for more than five
seconds. “RF03” or “RF04” appears in the display
window.
OR
OR
2. Press CH (V/v) to change the RF output channel
(RF03 or RF04). Tune the TV to this channel.
3. Turn off the DVD+VCR.
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on the
DVD+VCR to the video in jack on the TV using
the video cable supplied (V).
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the DVD+VCR to the audio left/right
in jacks on the TV (A1) using the supplied audio
cables.
Rear of DVD+VCR
b
Notes:
•
If you use this connection, set the TV’s source
selector to VIDEO.
•
For DVD/VCR VIDEO OUT jack connection,
resolution must be set to 480i or 480p, however
DVD/VCR VIDEO OUT is always at 480i standard
resolution.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the DVD+VCR to the corre-
sponding in jacks on the TV using an optional Y Pb
Pr cable (C).
Rear of TV
ANTENNA
INPUT
VIDEO
INPUT
AUDIO INPUT
R
L
Notes:
R
V
A1
•
The 480p and 720p resolutions are Progressive
scan applied resolutions.
Rear of DVD+VCR
•
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack and
S-VIDEO OUT jack).
Resolution setting
The resolution setting support only DVD playback.
1. Before you set the resolution, this unit must be in
stop mode. Press STOP to stop playback.
2. Press RESOLUTION once. The current resolution
setting will be appears in the display window.
C
A2
S
3. Press RESOLUTION repeatedly to change the
resolution you want.
The available resolution according to the connections
are as shown below.
Y
Pr
Pb
R
L
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
AUDIO INPUT
S-VIDEO
INPUT
OUTPUT
CONNECTIONS
HDMI
Available
Resolutions
1920 x 1080i
1280 x 720p
720 x 480p
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
Rear of TV
VIDEO OUT
Optional TV Connections
These connections support only DVD playback. The
tuner and VCR still output through the RF.OUT (R) or
DVD/VCR OUT (A, V) jacks.
COMPONENT
VIDEO OUT
Audio connection
VIDEO OUTi
S-VIDEOi
720 x 480i
720 x 480i
Connect the Left and Right AUDIO OUT jacks of the
DVD+VCR to the audio left/right in jacks on the TV
using the supplied audio cables (A2).
Note:
•
For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back.If the disc is copy protected, it will be
displayed at the 480p resolution without HDMI
cable connection. With HDMI cable connection,
the picture may not be displayed properly
S-Video connection
Connect the S-VIDEO OUT jack on the DVD+VCR
to the S-Video in jack on the TV using the optional
S-Video cable (S).
Note:
•
If your TV does not support the resolution you
have set, the picture may not be displayed
properly. Please read TV’s owner’s manual then
set the resolution that your TV can accept.
For S-Video connection, resolution must be set to 480i
or 480p, however S-VIDEO OUT is always at 480i
standard resolution.
Component Video / Progressive Scan
connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the
DVD+VCR’s progressive scan output for the highest
video resolution possible.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Connection
HDMI compatible TV
HDMI
If you have a HDMI TV or monitor, you can connect it
to this DVD+VCR using a HDMI cable.
1. Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
H
2. Connect the HDMI OUT jack on the unit to the
HDMI jack on a HDMI compatible TV or
monitor (H).
3. Press RESOLUTION repeatedly to select the
desired resolution.
Notes :
Rear of DVD+VCR
•
Both PCM and Bitstream Audio out are available,
when the sample frequency is set to 48kHz in
HDMI connection.
About HDMI
•
If Audio setup is set to bitstream and your TV
does not support Bitstream Audio out in HDMI
connection, audio sound may not output or
distorted.
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection
for use with DVD players, Set-Top boxes, and other
AV devices.
HDMI was developed to provide the technologies of
HDCP (High-bandwidth Digital Content Protection).
HDCP is used to protect digital content transmitted
and received.
•
•
When the no sound or noisy sound are output
with HDMI connection, set the Audio option [Dolby
Digital, DTS or MPEG] in the SETUP menu to
PCM or Off.
The arrow on the cable connector body should be
face up for correct alignment with the connector
on the DVD+VCR.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of
up to 5 gigabytes per second, one connector (instead
of several cables and connectors), and communica-
tion between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
•
•
•
If there is noise or lines on the screen, please
check the HDMI cable.
Not all HDCP-compatible DVI devices will work
with this unit.
If your HDMI TV does not support HDCP,
the blue screen appears on the screen.
Tip:
When you use HDMI connection, you can change the
resolution (480p, 720p, 1080i) for the HDMI output.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Amplifier
Rear of DVD+VCR
You can only listen to DVD playback using OPTICAL
(O), COAXIAL (X) and AUDIO OUT (A2) connections.
The tuner and VCR will still be heard through the
RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack.
(See page 12.)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
O
A1
A2
X
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the DVD+VCR to
the audio left and right in jacks on your amplifier,
receiver, or stereo system using the audio cables
(A1, A2) supplied.
R
L
COAXIAL
OPTICAL
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
1. Connect one of the DVD+VCR’s DIGITAL AUDIO
OUT jacks ( OPTICAL O, COAXIAL X) to the cor-
responding in jack on your amplifier. Use an
optional digital (OPTICAL O, COAXIAL X) audio
cable.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
2. You will need to activate the DVD+VCR’s digital
output. (See “AUDIO” on page 18).
Accessory Audio/Video (A/V) Connections to
DVD+VCR
Connect the VCR IN LINE 1 or LINE 2 jacks on the
DVD+VCR to the audio/video out jacks on your
accessory component, using the optional audio/video
cables. (Refer to page 25 for “Recording from
External Components”.)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG
2, Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
•
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
•
•
Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
To see the audio format of the current DVD in the
on-screen display, press AUDIO.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
• AUTO CLOCK SET
Initial Settings - VCR
The Auto Clock Set feature is set to ON at the fac-
tory. In the ON setting, the DVD+VCR looks for a
channel carrying XDS (Extended Data Services)
information. XDS updates the clock using the
Coordinated Universal Time.
By using the VCR Setup menu, you can make
various adjustments to items such as clock setting,
and timer recordings.
- Use b / B to choose ON or OFF.
Your DVD+VCR allows remote control adjustment of
several features.
• DAYLIGHT SAVINGS
You can turn Daylight Savings On or Off manually.
If you choose “AUTO”, the DVD+VCR sets the
clock using the DST information broadcast in the
signal (channel).
General Operation
1. Press VCR on the remote control.
- Use b / B to choose AUTO, ON or OFF.
2. Press MENU and the MAIN menu will appear.
• TIME ZONE
You can set your local Time Zone manually. If you
choose “AUTO”, the DVD+VCR sets the clock
using the first Coordinated Universal Time informa-
tion it finds in a broadcast signal.
- Use b / B to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII).
Notes:
3. Use v / V to select the desired menu, then press
•
The Auto Clock feature enables the DVD+VCR to
set up the clock while the DVD+VCR is turned off.
ENTER/OK.
•
There are cases where the TV station does not
send or sends wrong date and/or time information
and the DVD+VCR sets the incorrect time. If this
happens we recommend that you set the clock
manually.
4. Use v / V to choose a desired option on the seleted
Menu. Then use b / B to choose a desired setting.
5. Press MENU when finished.
Note:
Manual Clock Set
Menus remain on-screen for 3 minutes.
Use v / V / b / B to enter the necessary information.
•
•
MONTH : Choose the month.
DAY : Choose the date.
The day of the week will display automatically.
CLOCK
• YEAR : Choose the year.
The DVD+VCR gives you two ways to set the time
and date: the Auto Clock Feature or Manually.
• TIME : Choose the time.
Press and hold b / B to advance clock continuously.
Auto Clock Set
Notes:
•
If setting the clock manually, “AUTO CLOCK SET”
must set to “OFF”. If it is set to “ON”, an incorrect
date and/or time will be entered again when the
DVD+VCR is turned off.
•
The clock uses the 12-hour system. Be sure to
set AM and PM correctly.
PROGRAM
The Timer Recording function allows you to record up
to 8 programs within a period of one year. (See pages
23-24).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING
SETUP
This DVD+VCR is equipped with a frequency synthe-
sized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels
14-69 and CATV channels 1-125.
Auto Channel Programming
FUNCTION OSD
The on-screen display can be turned on or off.
AUDIO MODE
The DVD+VCR has two separate audio playback sys-
tems, the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system
plays on separate (left and right) channels, and the
NORMAL system plays monaural sound. The normal
track is always played so the cassette can be played
on a DVD+VCR that does not have VHS Hi-Fi.
1. Choose the SOURCE SELECT option, then use
b / B to select TUNER.
Use b / B to switch among TUNER, LINE1, and
LINE2.
2. Choose the AUTO CHANNEL SET option, then
use b / B to find channels.
• The tuner will automatically cycle through all
available channels (TV/CATV) in the area and
place them in the tuner’s memory.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo
and/or Second Audio Program (SAP) bilingual sig-
nals. Set this display to the desired position when
both MTS stereo and SAP signals are received.
When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding
receiving mode (Stereo or SAP) regardless of the
selected position. For normal operation, the display
should be in the STEREO position. The DVD+VCR
will then record a STEREO program when available,
and record a mono program IF the program is NOT
IN STEREO. For weak STEREO and/or SAP broad-
casts, changing the display to mono may give clearer
sound.
• After the AUTO CHANNEL SET is complete, the
TUNING menu will hide and return to the TV
screen automatically.
3. Make sure the TUNING BAND is set appropriately
(TV or CATV).
• TV : If you are using a standard antenna to
receive channels.
• CATV : If you are using basic cable to receive
channels.
To Add or Erase Channels
This feature allows you to add or erase channels
from memory manually.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-
FI/NORMAL) is in HI-FI position] for selecting the
audio output signals from the AUDIO OUT terminals
(L ch and R ch), and RF.OUT. This display setting
should normally be left in the stereo position, so that
when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a
mono tape is played and the audio output is set to
stereo, the same mono sound will be heard from both
left and right channels.
1. Choose the CH. ADD/DEL option, then use b / B
to select a channel to add or erase.
2. Use ENTER/OK to add or erase the channel.
Repeat steps 1 and 2 to add or erase other
channels.
3. Press MENU to return to the TV screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information
on-screen - DVD
Initial Settings - DVD
By using the DVD Setup menu, you can make vari-
ous adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 20.
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY to show various playback infor-
mation.
To display and exit the Menu:
The items displayed differ depending on the disc
type or playing status.
Press SETUP/MENU to display the menu. A second
press of SETUP/MENU will take you back to initial
screen.
1 / 3
1 / 12
To go to the next level:
Press B on the remote control.
To go back to the previous level:
0:20:09
Press b on the remote control.
ABC
1 ENG
General Operation
1 / 1
1. Press DVD on the remote control.
3D SUR
2. Press SETUP/MENU. The Setup menu appears.
3. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well
as alternate setting(s).
2. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
ꢀ Title (Track) – Current title (or track)
number/total number of titles (or tracks)
ꢀ Chapter – Current chapter number/total number
of chapters
ꢀ Time – Elapsed playing time
ꢀ Audio – Selected audio language or channel
ꢀ Subtitle – Selected subtitle
4. Use v / V to select the second desired option
then press B to move to the third level.
5. Use v / V to select the desired setting then press
ENTER/OK to confirm your selection. Some items
require additional steps.
ꢀ Angle – Selected angle/total number of angles
ꢀ Sound – Selected sound mode
6. Press SETUP/MENU or PLAY (N) to exit the
Setup menu.
Note:
If no button is pressed for a few seconds, the on-
screen display disappears.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE
AUDIO
Each DVD disc has a variety of audio output options.
Set this unit’s AUDIO options according to the type of
audio system you use.
Menu Language
Select a language for the VCR and DVD’s setup
menu and information display.
Dolby Digital / DTS / MPEG
Disc Audio / Subtitle / Menu
Bitstream: Select “Bitstream” if you connect the
DVD+VCR’s DIGITAL AUDIO OUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifi-
er. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
disc was recorded.
Other: To select another language, press number
buttons then ENTER/OK to enter the corresponding
4-digit number according to the language code list in
the reference chapter (see page 36). If you enter the
wrong language code, press CLEAR.
Off (for DTS): If you select “Off”, the DTS signal
is not output through the DIGITAL AUDIO OUT
jack.
Off (for Disc Subtitle) : Turn off Subtitle.
Sample Freq. (Frequency)
DISPLAY
If your receiver or amplifier is NOT capable of han-
dling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is
made, this unit passes each type of signal through
without any further processing.
Check the documentation for your amplifier to verify
its capabilities.
DRC (Dynamic Range Control)
TV Aspect
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presen-
tation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without los-
ing clarity of sound. Set DRC to On for this effect.
4:3 :
Select when a standard 4:3 TV is connected.
16:9 : Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Vocal
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not
fit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
1. Select “Password” on the LOCK menu then press
B.
2. Follow step 2 as shown previous page (Rating).
To change the password, select the “Change”,
press ENTER/OK and input the new 4-digit code
then press ENTER/OK. Input it again to verify.
3. Press SETUP/MENU to exit the menu.
Rating
If you forget your Security Code
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the complete
disc or to certain scenes on the disc. Movies and
scenes are rated from 1 to 8, depending on the area.
DVD video discs may or may not respond to the
parental control setting if the Area code of the disc is
set wrongly. Some discs offer more suitable scenes as
an alternative. Ratings are area dependent.
If you forget your security code you can clear it using
the following steps:
1. Press SETUP/MENU to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
3. Enter a new code as described above.
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
Area Code
Enter the Area Code whose standards were used to
rate the DVD video disc, based on the list in the
reference chapter (see page 36).
1. Select “Rating” on the LOCK menu then press B.
1. Select “Area Code” on the LOCK menu then
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created.
press B.
2. Follow step 2 as shown previous page (Rating).
If you have not yet entered a security code you are
prompted to do so. Input a 4-digit code and press
ENTER/OK. Enter it again and press ENTER/OK
to verify. If you make a mistake before pressing
ENTER/OK, press CLEAR.
3. Select the first character using v / V buttons.
4. Press B and select the second character using
v / V buttons.
5. Press ENTER/OK to confirm your area code
selection.
3. Select a rating from 1 to 8 using the v / V buttons.
1-8: Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
Unlock : If you select unlock, parental control is
not active and the disc plays in full.
Note:
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative
is found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER/OK to confirm your rating selection,
then press SETUP/MENU to exit the menu.
5. Press OPEN/CLOSE (Z) to activate parental
control.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX(R) VOD
OTHERS
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more infor-
1. Select “DivX(R) VOD” option then press B.
2. Press ENTER/OK while “Select” is selected and
the registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
download the video onto a disc for playback on
this unit.
PBC
Set Playback Control (PBC) to On or Off.
3. Press ENTER/OK to exit.
On: Video CDs with PBC are played according to
the PBC.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
Off: Video CDs with PBC are played the same
way as Audio CDs.
Auto Play
You can set up the DVD+VCR so a DVD disc auto-
matically starts playing whenever the DVD is insert-
ed.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set
your preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations - VCR
This chapter describes how to operate the VCR and
DVD.
Manual Tracking
To manually adjust the tracking use the CH/TRK (v/V)
buttons on the remote control or CH (v/V) on the front
panel during playback.
VCR Tape Playback
Press the VCR button to select the device to be oper-
ated.
Notes:
•
Vertical jitter requires a very fine adjustment.
•
Tracking is automatically reset to normal when the
tape is ejected or the power cord is unplugged for
more than 3 seconds.
Basic Instructions
1. Turn on the TV.
2. Tune the TV to the DVD+VCR output channel
(CH 3 or 4) or if a direct VIDEO/AUDIO
Search
connection is made between the DVD+VCR and
the TV, set the TV’s source selector to VIDEO.
This function lets you visually search for a tape sec-
tion in either direction: forward and reverse. During
the high-speed picture search modes, the audio is
muted and horizontal lines (noise bars) appear. Also,
a short time is needed to stabilize the tape speed
when re-entering the PLAY mode so slight interfer-
ence may be observed during this time.
3. Insert a pre-recorded video cassette.
The
indicator lights and the DVD+VCR
powers on automatically.
4. If the (TIMER) indicator in the display window
is lit, press POWER (1) once.
To search:
5. If a tape without a safety tab is inserted the unit
starts playback automatically.
1. Press BACKWARD (m) or FORWARD (M)
during playback.
If not, press PLAY (N).
2. To return to playback, press PLAY (N).
6. Press STOP (x) to stop playback. If the tape
reaches the end before you press STOP (x) the
DVD+VCR automatically stops, rewinds and
ejects the tape.
Note:
After 3 minutes in SEARCH mode the DVD+VCR
returns to PLAY mode to protect the tape and video
heads.
Note:
It is not necessary to select the tape speed for play-
back because it is automatically selected by the
DVD+VCR. Also, during playback the TV/VCR selec-
tor switches to VCR mode automatically.
Still Picture and Frame-by-Frame Playback
1. Press PAUSE/STEP (X) during playback.
A still picture appears on the TV screen and the
audio is muted.
Auto Tracking
2
If the still picture vibrates vertically, stabilize it by
using CH/TRK (v/V) on the remote control.
Automatic tracking adjusts the picture to remove
snow or streaks and beings when:
3. Press PAUSE/STEP (X) repeatedly to advance
•
•
•
A tape is played for the first time.
the video picture one frame at a time.
The tape speed (SP, LP, SLP) changes.
4. To return to playback, press PLAY (N).
Streaks or snow appear due to scratches on the
tape.
Note:
After 5 minutes in STILL mode the DVD+VCR stops
to protect the tape and video heads.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Motion
1. While in still mode, press FORWARD (M). The
tape is played at a speed 1/19 times slower than
the normal speed.
2. Use CH/TRK (v/V) on the Remote Control if
necessary to adjust the tracking.
2. Set the AUDIO OUTPUT option to STEREO so
that the left channel sound (L) is heard from the
left speaker and the right channel sound (R) is
heard from the right speaker.
3. To return to the normal speed, press
PLAY (N).
Notes:
•
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV
screen.This is normal.
•
After 3 minutes in SLOW MOTION mode the
DVD+VCR goes back to PLAY mode to protect
the tape and video heads.
CM SKIP (Commercial Skip)
The other options are (LEFT) POSITION, which
results in the left channel sound (L) being heard
from both speakers or (RIGHT) POSITION, which
results in the right channel sound (R) being heard
from both speakers.
This feature is useful for skipping commercials or
short program segments.
1. Press CM SKIP in playback mode.
The DVD+VCR performs a fast forward picture
search through 30 seconds of recording.
3. Insert a cassette and press PLAY (N).
2. Press CM SKIP again to extend the search time
by an addition 30 seconds. The maximum search
time is 3 minutes.
MTS (Multi-Channel TV Sound)
3. When the search is complete, the DVD+VCR
goes into playback mode automatically.
This DVD+VCR can decode MTS stereo and bilingual
(SAP) off-the-air broadcast sound signals. It also
decodes stereo TV sound from local cable companies
as long as they operate on assigned cable frequen-
cies and use the EIA-recommended MTS stereo/bilin-
gual TV sound system.
VHS Hi-Fi Stereo/
MTS Broadcast
Multichannel TV Sound Indicator (MTS)
When you press ENTER/OK one or both of the indi-
cators appears on the TV Screen.
This DVD+VCR is equipped with the VHS Hi-Fi audio
sound system for recording and playback. The infor-
mation below gives a brief description of Hi-Fi audio
and how to record and play a tape in the Hi-Fi audio
mode.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE
option is in the STEREO position. The DVD+VCR
can also record mono audio onto the mono audio
track.
Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a
stereo audio system is required for true stereo play-
back. To experience the full and rich stereo sound
available with Hi-Fi recorded tapes, we recommend
the connection of this unit to a home stereo audio
system.
SAP
Some stations transmit a Second Audio Program,
which is used for a second language or additional
information.
1. Set the AUDIO MODE option to HI-FI on the VCR
SETUP menu .
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
To record one TV program while watching
another
VCR Tape Recording
Basic Instructions
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
1. Turn on the DVD+VCR and TV.
2. Using the TV, select the channel to be viewed.
2. Tune the TV to the DVD+VCR output channel
(CH 3 or 4) or if a direct VIDEO/AUDIO connec-
tion is made between the DVD+VCR and the TV,
set the TV’s source selector to VIDEO.
Timer Recording
3. Insert a video cassette with the safety tab intact.
For unattended recording, you must input the
channels to be recorded and the starting and ending
times.
4. Select the desired channel using CH/TRK (v/V).
5. If you are recording from another source via
audio/video input jacks (at the rear or front panel),
select LINE1 or LINE2 using INPUT.
Things to know before starting
If you try to set the program timer before setting
the clock, “PLEASE SET THE CLOCK” appears
for a moment and then CLOCK menu appears on
the TV screen. Set the time and date before
proceeding.
6. Set the desired recording speed (SP or SLP) by
pressing SPEED. This DVD+VCR is not designed
to record in LP mode.
7. Set the MTS mode (STEREO or SAP). Set the
BROADCAST TYPE option to SAP if applicable.
1. Turn on the DVD+VCR and the TV.
8. Press REC/ITR (z) and recording starts. The
REC indicator appears in the display window. If a
cassette with no safety tab is loaded, the cassette
is ejected.
2. Be sure the TV is set to the DVD+VCR output
channel (3 or 4).
3. Make sure the TUNING BAND in the TUNING
menu is set appropriately (TV or CATV).
9. Press STOP (x) to stop recording. If the tape
reaches the end before STOP (x) is pressed, the
DVD+VCR stops, rewinds and ejects the tape.
4. Press MENU and the MAIN menu appears.
5. Use v / V to choose the PROGRAM menu and
Tip:
press ENTER/OK.
Use PAUSE/STEP (X) for best results when making
changes while recording. For example, if you want to
change channels while recording, first press
PAUSE/STEP (X) to put the unit in pause mode,
select the desired channel on the DVD+VCR, and
then press PAUSE/STEP (X) again to resume
recording.
Note:
If eight programs are already entered, the FULLY
PROGRAMMED message appears for a moment
and then PROGRAM 1 appears on the TV
screen.
During the VCR recording mode, you cannot change
to the DVD mode.
To pause the recording
6. Use the v / V buttons to switch between the
program options, and the b / B buttons to input
the program information:
1. Press PAUSE/STEP (X) to pause the tape during
recording. The REC indicator flashes in the display
window.
Input the month, day, start and stop times of the
program you want to record.
2. When you want to continue recording, press
PAUSE/STEP (X) or press REC/ITR (z).
After 5 minutes in PAUSE mode, the DVD+VCR
stops automatically to protect the tape and the
video heads.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL: Select a TV channel, LINE1 or
LINE2.
Checking or Erasing the Timer Program
If you have CABLE TV and use a cable box (con-
verter) you must set the channel to match the
cable box output channel (usually CH 3 or 4).
Change channels on the cable box instead of with
the DVD+VCR. If you use a cable converter, you
can program multiple recordings only on the con-
verter box output channel. This is because the
converter determines what channel you view
through your DVD+VCR.
Programming can be checked whenever the
DVD+VCR is turned on.
1. Press MENU and the MAIN menu appears.
2. Use v / V to choose the PROGRAM menu and
press ENTER/OK.
SPEED: AUTO mode determines how much tape
is left and switches the speed from SP to SLP if it
is necessary to complete recording the program. If
this occurs there could be some picture and
sound distortion at the point where the speed
changes.
3. Use b / B to select a program you want to check
or erase. To erase the program, press CLEAR.
REPEAT: To record up to 8 programs on a certain
day of every week select WEEKLY. To record up
to 8 programs at the same time Monday through
Friday select DAILY. Otherwise select ONCE.
4. Press MENU to return to the TV screen.
Program Priority
7. Press MENU and the program is memorized by
the DVD+VCR.
If the recording start and end times of preset pro-
grams overlap on the same day (see the example),
the second program is not recorded until the first is
finished.
8. Additional programs may be entered by repeating
steps 1-7.
9. Ensure you insert a tape with the record safety
tab intact before the first programmed time.
10. Press STOP (x) to end timer recording.
Notes:
•
If you make a mistake or want to change a set-
ting, use v to select the option and correct it
using b / B.
In this example, the first part of program numbers 2
and 3 are not recorded.
•
If the program preset time is past, the “PAST
TIME PROGRAMMED” message appears on the
TV screen. Return to the incorrect program and
program it with the correct time.
•
•
If you enter a past date, the timer recording will
be performed on that date of the next year.
If the power fails or the DVD+VCR is unplugged
the clock and timer settings are kept in memory
for only 3 seconds. Otherwise you must reset the
clock and timer.
•
•
If the tape indicator is blinking, no tape is loaded.
When you are playing DVD at programmed
Recording time, the DVD+VCR automatically
change to VCR mode and start recording.
•
The DVD+VCR will automatically power off when
Timer Recording ends.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Extending the Recording Time
Instant Timer Recording
The recording time can be extended anytime by
pressing REC/ITR (z). Subsequent presses result in
advancing the recording time by 30-minute
increments.
With this feature you can record for a preset length
without using the program timer.
1. Turn on DVD+VCR and the TV.
2. Be sure the TV is tuned to the DVD+VCR output
channel (CH 3 or 4). If a direct VIDEO/AUDIO
connection is made between the DVD+VCR and
the TV, set the TV’s source selector to VIDEO.
Note:
If you press PAUSE/STEP (X) during instant timer
recording, the instant timer recording is cancelled.
3. Insert a video cassette with the safety tab intact.
4. Select the desired channel using CH/TRK (v/V)
or the number buttons (0-9). The channel number
appears on the TV screen. If you are recording
from another source via audio/video input jacks
(at the rear or front panel), select LINE1 (rear
jacks) or LINE2 (front jacks) by using INPUT.
Recording from External
Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
DVD+VCR’s external inputs.
5. Set the desired recording speed (SP or SLP)
using SPEED. The tape speed appears on the TV
screen.
1. Make sure that the component you want to record
from is connected properly to the DVD+VCR. See
page 14.
6. Press REC/ITR (z) twice. The menu appears on
2. Press INPUT repeatedly to select the external
input to record from.
the TV screen, recording starts, and the
(TIMER) indicator lights.
•
LINE1 (L1): Audio/Video Input mounted on
back panel.
INSTANT TIMER RECORD
•
LINE2 (L2): Audio/Video Input mounted on
front panel.
CHANNEL
SPEED
2
SP
3. Load a recordable tape.
START
NOW
LENGTH
0H30M
4. Set a recording mode (SP or SLP) as necessary
by pressing SPEED repeatedly.
7. Press REC/ITR (z) repeatedly to select the
recording time length. Each time you press this
button the recording time increases 30 minutes
(up to 9 hours). At the end of the recording, the
DVD+VCR will stop recording and shut off.
5. Play the tape or disc in the external component. If
you have a TV attached to your DVD+VCR, you
can see the video palying.
6. Press REC/ITR (z) once to start recording.
The REC indicator lights in the display window.
If you set the time to 0H00M, the DVD+VCR goes
into the normal recording mode. Press STOP (x)
to stop the recording.
7. Press STOP (x) to stop recording.
Notes:
•
Before recording, confirm the recording start posi-
tion.
Note:
During Instant Timer Recording, you cannot change
the channel on the DVD+VCR.
•
If your source is copy-protected using
CopyGuard, you will not be able to record it using
this unit. See Copyright on page 6 for more
details.
Checking the Recording Time
•
To record for a fixed length of time, see Instant
Timer Recording.
Press REC/ITR (z) once to check the recording time.
The recalled setting automatically returns to the TV
screen after 6 seconds.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Each press of the ENTER/OK changes the TV screen
in the following sequence.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
STOP
SP
CH
4
STEREO
1. Insert the disc you wish to copy into the DVD
deck and close the disc tray.
APR 30 , SAT
2:15 PM
2. Insert a blank VHS video tape into the VCR deck.
2:15 PM
0:35:40
3. Find the place on the DVD from which you want
to start dubbing using the PLAY, FF, REW and
PAUSE functions.
REM 1:58
For best results, pause playback at the point from
which you want to record.
Real-Time Counter
If a tape with contents recorded on it is inserted into
the VCR, the real-time counter shows length of the
tape running in hours, minutes, and seconds. Press
CLK/CNT to select the real-time counter display.
Every press of CLK/CNT changes the TV screen as
illustrated below.
4. Press the z REC/ITR. The DVD goes into PLAY
mode and the VCR goes into RECORD mode. If
the DVD disc menu appears, you may need to
press PLAY (N) manually to begin copying.
5. When the DVD is finished playing, press STOP (x)
to end copying.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
Notes:
REMAINING TIME
•
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs (or Discs). “Lock” is
displayed in the display window.
Counter Memory
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
•
•
You must stop the copy process manually when the
DVD movie ends, or the unit may replay and record over
and over again.
1. Begin recording or playing a tape.
2. Press CLK/CNT until the real-time counter is dis-
played on the TV screen.
When you stop the DVD playback during copying, the
recording on VCR is stopped automatically.
3. At the point that you want to locate later, reset the
real-time counter to “0:00:00” by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (x) when recording or playback fin-
ishes.
On-Screen Display - VCR
6. Press BACKWARD (m). The tape automatically
stops when the tape counter returns to about
“0:00:00”.
Some of these functions will be displayed every time
the DVD+VCR is operated.
Tape Remaining
❶
❷
❸
❹
❺
This function displays the amount of time remaining
on the tape during recording or playback. Press
CLK/CNT repeatedly until the REM indicator displays
on the TV screen during recording or playback.
The remaining tape length may not be displayed cor-
rectly depending on the condition of the tape and the
kind of the tape (T-140, T-160, or T-210 etc.).
PLAY
SP
HI-FI
CH 4
STEREO
OCT 8 , SAT
2:15 PM
Notes:
❻
❼
•
•
•
The function displays can be seen displayed on the TV
screen for 5 seconds.
❶ TAPE SPEED DISPLAY
❷ FUNCTION DISPLAY
❸ HI-FI DISPLAY
❺ STEREO/SAP DISPLAY
(MONO is not displayed)
The clock (or tape counter, tape remaining) mode will be
displayed until you press ENTER/OK.
❻ DATE DISPLAY
The tape counter and the remaining tape length indica-
tor appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
❼ CLOCK/ COUNT/
REMAIN DISPLAY
❹ CHANNEL DISPLAY
26
Download from Www.Somanuals.com. All Manuals Search And Download.
S-VHS Quasi Playback (SQPB)
Additional VCR Information
•
•
•
•
During manual recording, timer recording, Instant
Timer Recording, playback, or fast forward
modes, the DVD+VCR automatically starts
rewinding the tape at the end of the tape. The
cassette stops at the beginning of the tape and is
ejected.
•
•
This DVD+VCR can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
SQPB is an abbreviation for S-VHS Quasi
Playback.
After you have finished using the DVD+VCR,
rewind, eject, and remove the cassette. Place the
cassette in its protective sleeve to protect it from
dust. It is not necessary to rewind the cassette
before removing it, but if you do, it is ready to play
or record the next time you use it.
Easy Information
If the Extended Data Service (XDS) signals are pro-
vided along with normal TV signal in your area or dur-
ing playback of a tape recorded with Extended Data
Service (XDS) signals, the station ID, program title,
and program details are shown on the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press ENTER/OK and the station ID
will appear on the TV screen. Press ENTER/OK again
and the program details will appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER/OK twice and
the program title and program details will appear on
the TV screen.
Be sure the DVD+VCR channel selector is on the
correct channel you wish to record. The channel
that is being recorded can always be checked by
setting the television on the DVD+VCR channel
(CH 3 or 4) and pressing the TV/VCR to turn the
DVD+VCR’s TV indicator off.
Do not attempt to hook up more than one televi-
sion set to the DVD+VCR for either recording or
playback.
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are not
applicable to this program.
VCR Auto Play System
This DVD+VCR features automatic playback.
When you load a tape with the safety tab removed
the following occurs:
CH
4
SP
WABC
STEREO
•
The Output Source is changed to VCR mode
automatically.
•
•
The power turns on automatically and playback begins.
“Home video”
APR 30 , SAT
2:15 PM
At the end of the tape, the DVD+VCR stops, then
rewinds.
Easy Information Screen
(Station ID)
•
The tape is ejected after rewinding and the turns itself
off automatically.
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Note:
Auto power off does not function during regular DVD play
mode. (DVD+VCR power stays on.)
Easy Information Screen
(Program details)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations - DVD
Playback Setup
ꢀ Turn the TV on and select the video input source connected to this unit.
ꢀ Audio System: Turn the Audio System on and select the input source connected to this unit.
1. Press OPEN/CLOSE (Z) to open the disc tray.
2. Load your chosen disc in the tray with the playback side down.
3. Press OPEN/CLOSE (Z) to close the tray.
READING appears on the display window, and playback starts automatically.
If playback does not start, press N (PLAY).
In some cases, the disc menu might appear instead.
Note:
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Rating”, on page 19).
General features
Buttons
Operations
Discs
ALL
Z (OPEN / CLOSE)
X (PAUSE)
Opens or closes the disc tray.
During playback, press X to pause playback.
Press X repeatedly to play Frame-by-Frame.
ALL
DVD
VCD
DivX
SKIP (. / >)
During playback, press SKIP (. or >) to go to the
next chapter/track or to return to the beginning of the cur-
rent chapter/track.
ALL
Press SKIP . twice briefly to step back to the previous
chapter/track.
DVD
ACD
VCD
MP3
DivX
DivX
BACKWORD
During playback, press SCAN (m or M) repeatedly to
/FORWARD(m / M) select the required scan speed.
DVD, DivX disc; 4 steps
Video CD, MP3, Audio CD ; 3 steps
DVD
ALL
VCD
While the playback is paused, press SCAN M repeated-
ly to play in slow motion (4 steps, forward only).
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
Note:
• If you press SKIP (>) once during Repeat Chapter
playback, the repeat playback cancels.
• On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the repeat function (See “PBC”
on page 20).
DVD
DivX
VCD
ACD
A-B
During playback, each press of A-B button to select point
A and point B and repeats a sequence from point A
(Starting point) to point B (End point).
Note:
The A-B repeat function is available only in the current
track.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Buttons
Operations
Discs
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image (4 steps).
DVD
VCD
DIVX
You can move through the zoomed picture using b B v V
buttons. Press CLEAR to exit.
Note:
Zoom may not work on some DVDs.
ACD
DVD
MP3
WMA
RANDOM
TITLE
During playback or in stop mode, press RANDOM for ran-
dom playback.
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DISC MENU
(ANGLE)
The disc menu appears on the screen.
DVD
DVD
During playback of DVD disc contains scenes recorded
different camera angles, press ANGLE repeatedly to
select a desired angle.
Tip:
The Camera Angle icon is displayed on the TV screen
when alternate angles are available.
DVD
DivX
DivX
(SUBTITLE)
During playback, press SUBTITLE repeatedly to select a
desired subtitle language.
DVD
VCD
(AUDIO)
During playback, press AUDIO repeatedly to hear a differ-
ent audio language or audio track.
Time Search DVD
VCD
DivX
Additional features
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
3D Surround
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR to remove the
numbers you entered. Then input the correct
numbers.
DVD
VCD
DivX
1. Press DISPLAY during playback.
2. Use 3 or 4 to select the sound option.
4. Press ENTER/OK to confirm. Playback starts from
the selected time.
The sound option will be highlighted.
3. Use 1 or 2 to select “3D SUR”.
To turn off the 3D Surround effect, select
“Normal”.
ACD
1. Press AUDIO during playback.
“3D SUR” appears on the menu screen.
2. To return to normal playback, press AUDIO
repeatedly until “3D SUR” disappears from the
menu screen.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Marker Search DVD
To enter a Marker
VCD
DivX
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The mark-
er search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER/OK and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
Last Scene Memory DVD
ACD
VCD1.1
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Note:
This player does not memorize the scene of a disc if
you switch off the player before commencing to play
the disc.
Screen Saver
The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or
MP3/WMA file
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
This unit can play Audio CDs or MP3/WMA files
recorded media.
1. Insert an Audio CD or MP3/WMA files recorded
media. AUDIO CD or MUSIC menu appears.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
or Audio CD, a menu appears on the TV screen.
Press v / V to select a track/file then press PLAY or
ENTER/OK and playback starts. You can use variable
playback functions. Refer to page 28-30.
2. During STOP mode, press PROGRAM and
E
the
mark will appear
Note:
Press PROGRAM again to exit the program edit
E
mode, then the
mark will disappear.
3. Select a track on the “List”, then press
ENTER/OK to place the selected track on the
“Program” list. Repeat to place additional tracks
on the list.
4. Select the track you want to start playing on the
“Program” list.
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Song, Artist, Album, Comment, Genre ]
5. Press PLAY or ENTER/OK to start. Playback
begins in the order in which you programmed the
tracks. Playback stops after all of the tracks on
the “Program” list have played once.
• If there is no information, “No ID3 TAG” appear on
the menu screen.
6. To resume normal playback from programmed
playback, select a track on the list and then press
PLAY.
Tips:
•
If you are in a file list on the “MUSIC” menu and
Repeat Programmed Tracks
want to return to the Folder list, use the v / V to
highlight
Press REPEAT to select a desired repeat mode.
and press ENTER/OK.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
• Press DISC MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
Note:
If you press > once during Repeat Track playback,
the repeat playback cancels.
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
Erasing a Track from “Program” List
1. During STOP mode, press PROGRAM and
E
the
mark will appear
• Bit rate: within 32 - 320kbps (MP3),
32 - 320kbps (WMA)
2. Use v V b B to select the track that you wish to
erase from the Program list.
• The player cannot read an MP3/WMA file that
has a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software
that cannot create a file system (eg. Direct-CD)
it is impossible to playback MP3 / WMA files.
We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as
/ ? * : “ < > l etc.
3. Press CLEAR. Repeat step 1~3 to erase addition-
al tracks on the list.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
E
the
mark will appear
2. Use v V b B to select “Clear All”, then press
ENTER/OK.
Note:
The programs are also cleared when the power is off
or the disc is removed.
• The total number of files in a folder should be
less than 1190 files.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom
Viewing a JPEG file
Using this DVD+VCR you can view discs with JPEG
files.
Use zoom to enlarge the photo image. (see page 29)
Note:
When the resolution is set to 720p or 1080i,
this function is not available.
1. Insert a disc and close the tray. The PHOTO
menu appears on the TV screen.
To rotate picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
To listen to MP3 music while watching
picture
1. Insert the disc containing the two types of file in
the player.
2. Press TITLE to display PHOTO menu.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
2. Press v / V to select a folder, and press
ENTER/OK. A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
Playback starts. The playback will continue until
STOP is pressed.
Note:
remote to highlight
and press ENTER/OK.
When the resolution is set to 720p or 1080i,
this function is not available.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER/OK or
PLAY (N). The selected file will appear for view-
ing. While viewing a file, you can press STOP to
move to the previous menu (PHOTO menu).
Tip:
To listen to only the desired music while watching pic-
ture, program the desired tracks from the “MUSIC”
menu and then proceed as above.
Tips:
•
Information and user guidance regarding the cur-
rent image is displayed in the lower part of the
screen. You can toggle this bar on and off using
RETURN (O).
JPEG disc compatibility with this player is
limited as follows:
•
There are three Slide Speed options
>>> (Fast), >> (Normal) and > (Slow)
Use v V b B to highlight the Speed. Then, use b
/ B to select the option you want to use then
press ENTER/OK.
:
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD+VCR
to read the disc’s contents. If you don’t see an
on-screen display after several minutes, some of
the files may be too large — reduce the resolution
of the JPEG files to less than 5760 (Horizontal) x
3840 (Vertical) pixels and burn another disc.
Slide Show
Use v V b B to highlight the
press ENTER/OK.
(Slide Show) then
• The total number of files in a folder should be
less than 1190 files.
Still Picture
• Some discs may be incompatible due to a differ-
ent recording format or the condition of disc.
1. Press PAUSE/STEP (X) during slide show.
The player will now go into PAUSE mode.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
2. To return to the slide show, press PLAY (N) or
press PAUSE/STEP (X) a gain.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
Moving to another File
• File names without “.jpg” extension will not be
able to be read by this DVD+VCR. Even though
the files are shown as JPEG image files in
Windows Explorer.
Press SKIP (> or .) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DivX Movie file
Using this DVD+VCR, you can play DivX file.
DivX disc compatibility with this player is
limited as follows:
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a DivX file recorded media. The MOVIE
menu appears on the TV screen.
• The file name of the DivX subtitle is available by
56 characters.
• If there is impossible code to express in the DivX
file, it may be displayed as “ _ ” mark on the dis-
play.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate nor-
mally.
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears.
• If the file is recorded with GMC, the unit sup-
ports only 1-point of the record level.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER/OK or PLAY.
You can use variable playback functions. Refer to
page 28-30.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There are different levels of GMC encoding, usu-
ally called 1-point, 2-point, or 3-point GMC.
4. Press STOP to stop the playback. The Movie
menu appears
Playable DivX file
.avi, .mpg, .mpeg
Tips:
• If you are in a file list and want to return to the pre-
vious Folder list, use the v / V buttons on the
Playable Subtitle format
remote to highlight
and press ENTER/OK.
SubRip(*.srt/*.txt)
SAMI(*.smi)
• Press DISC MENU to move to the next page.
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt) /
TMPlayer(*.txt)
• On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE and MUSIC, PHOTO and MOVIE word
on top of the menu is highlighted.
• The disc subtitle may not be displayed properly, if a
DivX subtitle is downloaded through the internet.
Playable Codec format
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,
“MP43”, “3IVX”.
• If the Disc Subtitle setup menu does not have the
DivX subtitile language you are going to play, the
subtitle may not be displayed properly.
Playable Audio format
“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 320kbps (WMA)
Notice for displaying the DivX subtitle
If the subtitle does not display properly during play-
back, press and hold SUBTITLE about 3 seconds
then press b / B to select another language code until
the subtitle is displayed properly.
• Not all the WMA Audio format is compatible with
this unit.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format
Disc
This unit will play DVD-R/RW discs recorded using
the DVD-Video format that have been finalized using
a DVD-recorder.
Maintenance and Service
Refer to the information in this chapter before con-
tacting a service technician.
Handling the Unit
• This unit will play DVD-RW discs recorded using
the Video Recording (VR) format.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
1. Insert a disc and close the tray, It start playing
automatically.
2. The DVD-VR menu appears on the TV screen
when you press DISC MENU buttons while play-
ing.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the sur-
faces are extremely dirty, use a soft cloth lightly mois-
tened with a mild detergent solution.
3. Press v / V to select a track then press PLAY or
ENTER and playback starts.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
4. Press DISC MENU to move to the list menu.
Notes:
Maintaining the Unit
• Unfinalized DVD-R/RW discs cannot be played in
this player.
The DVD+VCR is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
• Some DVD-VR disc are made with CPRM data by
DVD RECORDER. Player does not support these
kinds of discs.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
For details, please contact your nearest authorized
service center.
This player is CPRM compatible, which means that
you can record copy-once broadcast programs, but
you cannot then make a copy of those recordings.
CPRM recordings can only be made on DVD-RW
discs formatted in VR mode, and CPRM recordings
can only be played on players that are specifically
compatible with CPRM.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Code numbers of controllable TVs
Controlling Your TV with the
Supplied Remote
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08,56
16,33,37,44,45
70
By pressing
POWER
INPUT
You can
AKAI
01
NEC
Turn the TV on or off.
Switch the TV’s input source.
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL
PANASONIC
PHILCO
43
BELL & HOWELL
BROKSONIC
CANDLE
33
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
18,19
CH +/–
Scans up or down through
memorized channels.
51
CCE
07
PHILIPS
CENTURION
CINERAL
CITIZEN
08
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
VOL +/–
Adjust the volume of the TV.
43
09
49,50,51,52,53,54,55
03,37,44
CORONADO
CROWN
09
11,13
Note:
09
16,17,23
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,03,37,44,69
16,17,23
Depending on the unit being connected, you may not
be able to control your TV using some of the buttons.
REALISTIC
SAMPO
08
01,09,16,17,18,19
28,29
SAMSUNG
SANYO
01,08,09,25,68
28,29
Controlling other TVs with the remote
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC 03,10,11,13,37,44
SEARS
09,25,26,27,28,29
64
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is list-
ed in the table below, set the appropriate manufactur-
er code.
GRADIENTE
HITACHI
JC PENNEY
JVC
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SEMP
SHARP
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62,93
SIGNATURE 2000
KIOTE
SONY
KMC
09
SOUNDESIGN
SYLVANIA
51
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
KTV
01,08,09,31
01,07,08,09,35,39,40
33
01,04,05,06,07,
08,35,51
LG (GOLDSTAR)
LODGENET
LOGIK
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
46,47
33
11
2. Release TV POWER button.
LXI
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
MAGNAVOX
69
08
MAJESTIC
TOSHIBA
WARDS
01,25,26,27,64
01,06,08,09,10,33,34
48
MARANTZ
01,32
MEMOREX
33
XR1000
MGA/MITSUBISHI
01,08,32,34
ZENITH
01,02,33,59
Notes:
•
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
•
•
If you enter a new code number, the code number previ-
ously entered will be erased.
When you replace the batteries of the remote, the code
number you have set may be reset to the default set-
ting. Set the appropriate code number again.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes List
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes List
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
KE
KW
LY
Kuwait
Libya
Luxembourg
PT
RO
El Salvador
LU
Zimbabwe
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall out-
let securely.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
Abnormal or no picture
ꢀ The TV is not set to receive DVD+VCR
signal output.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the DVD+VCR player appears on the
TV screen.
ꢀ The video cable is not connected
securely.
ꢀ Set HDMI on the front panel to OFF.
ꢀ The HDMI mode is on.
ꢀ Check TV capability.
ꢀ Unit output setting and TV resolution
capabilites mismatch.
ꢀ Check mode of connections
(eg. S-Video, Components etc.).
ꢀ Check unit Resolution setting accord-
ing to TV capability and mode of con-
nection.
ꢀ Wrong cable connection.
ꢀ Check the connection.
Distorted or no sound.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD+VCR signal outpt.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.
ꢀ The audio cables are not connected
ꢀ Connect the audio cable into the jacks
securely.
securely.
ꢀ The power of the equipment connected
ꢀ Turn on the equipment connected with
with the audio cable is turned off.
the audio cable.
ꢀ The AUDIO options are set to the wrong ꢀ Set the AUDIO options to the correct
position.
position.
ꢀ In HDMI mode, audio selection is not
ꢀ Change AUDIO setup to PCM mode.
set to PCM.
ꢀ The disc is dirty.
The playback picture is
poor.
ꢀ Clean thd disc.
ꢀ The TV channels are not tuned in
ꢀ Check tuning, carry out tuning again.
properly.
ꢀ Tape heads are dirty.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on
ꢀ Use CH/TRK (+/-) for manual tracking
another VCR.
adjustment while tape is playing.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
ꢀ No disc is inserted.
Correction
Symptom
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The DVD+VCR does
not start playback.
ꢀ No tape is inserted.
ꢀ Insert a playable disc. (Check the disc
type and Regional code.)
ꢀ An unplayable disc is inserted.
ꢀ The disc is placed upside down.
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
ꢀ The disc is not placed within the
inside the guide.
guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
ꢀ The Rating level is set.
the Rating level.
ꢀ Eject the tape in.
ꢀ Is the cassette compartment empty?
Video tape cannot be
inserted.
No Hi-Fi sound
ꢀ Select STEREO by repeatedly pressing
ꢀ Audio mode is not set properly.
AUDIO on the remote control.
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
The remote control
remote control and this unit.
does not work properly.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
ꢀ The remote control is not pointed at
ꢀ Point the remote control at the remote
the remote sensor of the DVD+VCR.
sensor of the DVD+VCR.
ꢀ The remote control is too far from the
ꢀ Operate the remote control within 23ft
DVD+VCR.
(7m).
ꢀ This remote control use the same
buttons for VCR and DVD functions
(ex.PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
ꢀ Turn camcorder on and operate
properly.
Camcorder image is
not shown.
ꢀ Camcorder is off.
Camcorder image via
AV input to DVD+VCR
is not shown on TV
screen.
ꢀ Press INPUT to select LINE input
channel (LINE1 or LINE2).
ꢀ DVD+VCR SOURCE SELECT is not
set to LINE1 or LINE2.
Timer recording is not
possible.
ꢀ Set clock to correct time.
ꢀ Clock in DVD+VCR is not set to
correct time.
ꢀ Timer has been programmed
ꢀ Reprogram Timer.
incorrectly.
ꢀ Reprogram Timer and turn DVD+VCR
off to enable timer.
ꢀ
indicator light does not appear after
programming timer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
120V, 60 Hz
Power consumption
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
Signal system
18 W
16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)
9.26 lbs (4.2 kg)
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
NTSC
Inputs
ANTENNA IN
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
75 ohms (VHF/UHF/CATV)
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
S-VIDEO OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 ohms
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Adjustable)
VCR Specifications
Head system
Timer
Tape speed
Tape width
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
Maximum recording time
Rewind time
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20 Hz to 20 kHz
More than 43 dB
More than 88 dB
Channel separation
More than 60 dB
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz,
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT jacks only)
Less than 0.008%
More than 95 dB (DVD/CD)
Accessories:
Video cable x 1, Audio cable (L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2
• Design and specifications are subject to change without prior notice.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
LG
DVD/VCR LIMITED WARRANTY - USA
The manufacturer will repair or replace your product, at the manufacturer’s option, if it proves to be defective in
material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective
from the date (“Date of Installation”) of original consumer purchase of the product. This warranty is good only to the
original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
This is an Exchange Product. Call 1-800-243-0000 for
instructions on getting the defective unit replaced.
LABOR: 90 DAYS from the Date of Purchase.
PARTS: ONE YEAR from the Date of Purchase.
Please retain dated sales receipt and your box to return
the unit for replacement.
Replacement Units is warranted for the remaining
During the first 90 days of the Warranty Period, shipping
charges both ways will be paid by the manufacturer. During
the remainder of the Warranty Period (91-365 days), you
pay in-bound shipping charges and the manufacturer pays
return shipping charges.
period of the original warranty.
Visit our website at http://us.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCI-
DENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNECTION WITH THE
PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside envi-
ronmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, light-
ning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or volt-
age, signal reception or input, software not licensed directly by LG, software errors that do not disable function-
ality, operating and software protocols adopted after the date of manufacture or for outside the US, institutional
or commercial use, or other causes not arising out of defect in material or workmanship.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select
appropriate options from the menu.
For Where to buy, Product Assistance, or
Customer Assistance
Or visit our website at http://us.lgservice.com
FOR WARRANTY SERVICE:
You must call 1-800-243-0000 (24 hours a day, 365 days per year) and select an appropriate option from the menu
to confirm the product is defective and to obtain a Return Authorization (RA). If the defect has occurred during the
first 90 days of the Warranty Period, you will be sent a return-shipping label. After you obtain an RA for return,
please box your unit with a legible copy of the sales receipt and enough packing material to ensure undamaged
delivery of your product. When you receive the label, place it on the box and call the 800# in the instructions for
pick-up. When your unit is received, the manufacturer will replace your unit in accordance with this Limited Warranty.
ADVANCE SHIPMENT. If a replacement unit is available and you want second day delivery, our service representa-
tive will ask for your credit card number. A reserved deposit by credit card is required as surety for such advance
shipment. Your credit card will not be charged if you return the defective unit in 10 business days. For advance ship-
ment, the return label will come with the replacement unit sent to you. Please follow boxing and shipping instructions
above.
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
GS# 3835RV00???
Printed in Indonesia
lssue O
Download from Www.Somanuals.com. All Manuals Search And Download.
|