LH-CX245Y.NA5HLLS-ENG
DVD/VCR COMBI RECEIVER
Combi Receiver System
OWNER’S MANUAL
MODEL: LH-CX245
(Main Unit: LH-CX245Y
Speakers: LHS-CX245T, LHS-CX245W
CD-R/RW
PAL
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General Features . . . . . . . . . . . . . . . . . . . . . . .32
Moving to another TITLE . . . . . . . . . . . . . . .32
Moving to another CHAPTER/TRACK . . . . . .32
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Changing the Audio Channel . . . . . . . . . . . .32
Still Picture and Frame-by-Frame Playback . .33
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .33
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .33
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .33
Time Search . . . . . . . . . . . . . . . . . . . . . . . . .33
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Marker Search . . . . . . . . . . . . . . . . . . . . . . .34
Special DVD Features . . . . . . . . . . . . . . . . . . .34
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . .34
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . .34
Camera Angle . . . . . . . . . . . . . . . . . . . . . . .34
Changing the Audio Language . . . . . . . . . . .34
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Playing an Audio CD or MP3/WMA Disc . . . . . . .35
Audio CD and MP3 / WMA Disc Features . . . . . .36
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Moving to another Track . . . . . . . . . . . . . . . .36
Repeat Track/All/Off . . . . . . . . . . . . . . . . . . .36
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .36
3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .36
Programmed Playback . . . . . . . . . . . . . . . . . . . . .37
Repeat Programmed Tracks . . . . . . . . . . . . .37
Erasing a Track from Program List . . . . . . . .37
Erasing the Complete Program List . . . . . . . .37
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . . . .38
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . .38
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .38
Moving to another File . . . . . . . . . . . . . . . . .38
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
To rotate picture . . . . . . . . . . . . . . . . . . . . . .38
To listen to MP3/WMA music watching picture . . .38
Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . .39
Playing a DVD VR format Disc . . . . . . . . . . . . .40
Maintenance and Service . . . . . . . . . . . . . . . . .40
Playing a DivX Movie Disc . . . . . . . . . . . . . . . .41
Additional Features-VCR part . . . . . . . . . . .42-43
On Screen Display . . . . . . . . . . . . . . . . . . . .42
Tape Counter Memory Stop . . . . . . . . . . . . .42
Friendly User Guide (Video Doctor) . . . . . . .42
Hi-Fi Stereo Sound System . . . . . . . . . . . . .43
Wide Screen Compatibility 16:9 . . . . . . . . . .43
Additional Features . . . . . . . . . . . . . . . . . . . . .44
Last Scene Memory . . . . . . . . . . . . . . . . . . .44
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . .44
Video Mode Setting . . . . . . . . . . . . . . . . . . .44
Copying from DVD to VCR . . . . . . . . . . . . . . . .45
Recording from another video recorder . . . . .45
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . .45
Presetting the Radio Stations . . . . . . . . . . . .46
Listening to the Radio . . . . . . . . . . . . . . . . . .46
To Clear the Stored Radio Stations . . . . . . . .46
Tuning into a Station Manually . . . . . . . . . . .47
Tuning into a Station Automatically . . . . . . . .47
RDS Operation . . . . . . . . . . . . . . . . . . . . . . .47
Introduction . . . . . . . . . . . . . . . . . . .4
Symbol Used in this Manual . . . . . . . . . . . . . . .4
About the
Symbol Display . . . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4
Handling Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . . .4
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Types of Playable Discs . . . . . . . . . . . . . . . . . . .5
Regional code . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Display Window . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Installation and Setup . . . . . . . . . . .11
TV & Set Top Box
(or another VCR Connections) . . . . . . . . . .11-12
Accessory Audio/Video (A/V) Connections to
. . . . . . . . . . . . . . . .13
DVD/VCR Combi receiver
Radio Aerial Connections . . . . . . . . . . . . . . . .13
Speaker System Connection . . . . . . . . . . . . . .14
Speaker Positioning . . . . . . . . . . . . . . . . . . . . .15
Mini Glossary for Audio Stream &
Surround mode . . . . . . . . . . . . . . . . . . . . . . . . .16
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Before Operation-VCR part . . . . . . . . . . . . .17-21
Tuning in a video channel on your TV . . . . . . . . . .17
Using your receiver for the very first time . . .17
Setting the clock Manually . . . . . . . . . . . . . . . .18
To set the colour system . . . . . . . . . . . . . . . . .18
How to use the main menu . . . . . . . . . . . . . .19
Tuning in TV stations Automatically . . . . . . . .19
Tuning in TV stations Manually . . . . . . . . . . .20
Changing the order of TV stations . . . . . . . . .21
Deleting TV stations . . . . . . . . . . . . . . . . . . .21
Before Operation-DVD part . . . . . . . . . . . . .22-27
On-Screen Display . . . . . . . . . . . . . . . . . . . . . .22
Initial Settings . . . . . . . . . . . . . . . . . . . . . . .23-27
General Operation . . . . . . . . . . . . . . . . . . . .23
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .23
ꢀ Menu Language . . . . . . . . . . . . . . . . . . . .23
ꢀ Disc Audio / Subtitle / Menu . . . . . . . . . . . .23
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .24
ꢀ TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . .24
ꢀ Display Mode . . . . . . . . . . . . . . . . . . . . . .24
ꢀ Progressive Scan . . . . . . . . . . . . . . . . . . .24
ꢀ TV Output Select . . . . . . . . . . . . . . . . . . . .25
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ꢀ 5.1 Speaker Setup . . . . . . . . . . . . . . . . . .25
ꢀ Dynamic Range Control (DRC) . . . . . . . . .25
ꢀ Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .26
ꢀ PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
ꢀ Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . .26
ꢀ DivX(R) VOD . . . . . . . . . . . . . . . . . . . . . . .26
LOCK (Parental Control) . . . . . . . . . . . . . . . .27
ꢀ Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
ꢀ Password (Security Code) . . . . . . . . . . . . .27
ꢀ Country Code . . . . . . . . . . . . . . . . . . . . . .27
Operation . . . . . . . . . . . . . . . . . . . .27
Playing a tape . . . . . . . . . . . . . . . . . . . . . . .27-31
ꢀ CM (Commercial Message) Skip . . . . . . . .27
ꢀ OPR (Optimum Picture Response) . . . . . .27
Instant Timer Recording (ITR) . . . . . . . . . . . .28
ShowView Programming . . . . . . . . . . . . . . . .29
Timer recording using On Screen Display . . .30
If Timer record events Overlap . . . . . . . . . . .31
Change (Deleting) the Timer Programme . . .31
Playing a DVD or Video CD . . . . . . . . . . . . .32-34
Reference . . . . . . . . . . . . . . . . . . . .48
Language Codes . . . . . . . . . . . . . . . . . . . . . . .48
Country Codes . . . . . . . . . . . . . . . . . . . . . . . . .48
Troubleshooting . . . . . . . . . . . . . . . . . . . . .49-50
Specification . . . . . . . . . . . . . . . . . . . . . . . .51-52
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
About the
Symbol Display
“
” may appear on your TV display during opera-
tion and indicates that the function explained in this
owner’s manual is not available on that specific DVD
video disc.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
location.
Notes on Discs
Handling Discs
Symbol Used in this Manual
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
The exclamation point alerts you to the pres-
ence of important operating and maintenance
/ servicing instructions.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sun-
light.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Note:
Indicates special notes and operating features.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the sym-
bol.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
DivX Discs
Setting the Output Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
• If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator on the front panel lights and output
source of DVD deck is viewed on the TV screen.
• If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator on the front panel lights and output
source of VCR deck is viewed on the TV screen.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Regional code
This DVD player is designed and manufac-
tured for playback of region “2” encoded DVD
software. This unit can play only DVD discs
labeled “2” or “ALL”.
DVD
2
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Notes on Regional Codes
Audio CD
(8 cm / 12 cm disc)
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover.
This number must match your DVD player’s region-
al code or the disc cannot play.
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
• If you try to play a DVD with a different region code
from your player, the message “Check Regional
Code” appears on the TV screen.
Notes:
• Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD -R, DVD +R, DVD -
RW, DVD +RW) disc itself, some CD-R/RW (or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available or other functions may be added.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No’s. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
world-wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc. Copyright 1996, 2003
Digital Theater Systems, Inc. All rights reserved.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC: Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
Disc-related terms
DVD ±R / DVD ±RW
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38 Gigabytes and double-sided discs hold twice as
much. There are no dual layer single sided recordable
discs.
Title (DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documen-
tary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
assigned a reference number enabling you to locate it
easily.
VCD (Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along with quality stereo sound.
Chapter (DVD video discs only)
MPEG
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Scene (VCD)
MP3
On a video CD with PBC (playback control) functions,
moving pictures and still pictures are divided into
sections called “scenes”. Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
WMA
Windows media audio file. A type of coding / decoding
developed by Microsoft Corp.
Track
JPEG
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several tracks
of audio.
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no limit
on the number of colors.
DivX
DivX is the name of a revolutionary new video codec
which is based on the new MPEG-4 compression
standard for video.You will be able to play DivX
movies using this DVD/VCR Combi receiver.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
OPEN/CLOSE (Z)
EJECT(Z)
Opens or closes the disc tray.
Ejects the tape in the VCR deck.
PAUSE/STEP(X/C)
Pause playback of a tape or a disc in the DVD or
Remote Sensor
Point the DVD/VCR Combi receiver
remote control here.
VCR deck temporarily.
Press repeatedly for frame-by-frame playback.
Disc Tray (DVD deck)
STOP (x)
Stops playback of a disc or tape.
Insert a disc here.
PLAY (B)
To play back a recorded tape or disc.
REC/ITR (z)
To record normally or to
activate Instant Timer Recording.
Cassette Compartment
(VCR deck)
Insert a video cassette here.
FM/AM
To change between AM
and FM bands.
PROG./
PRESET
Display window
DVD/VCR (output select)
Select one of your output sources to view
on the TV screen between DVD and VCR.
PROG./PRESET (+/-)
To scan up or down through memorized channels or
to control tracking during playing back a tape (VCR mode).
To tune in the desired station (Radio Mode).
INPUT SELECT
Select the VCR deck’s source (Tuner, A1, A2 or AV3)
VIDEO IN/AUDIO IN (Left/Right)
Connect the audio/video output of an external source
system, TV/Monitor, Another VCR).
Reverse SKIP/SCAN (
/ )
S Q
DVD: Go to beginning of current chapter/track or to previous chapter/track.
Press and hold for two seconds for a fast reverse search.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
Forward SKIP/SCAN (
/ )
R T
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a
fast forward search.
VCR: Advances the tape during the STOP mode or for fast
forward picture search.
VOLUME Control
Turn the knob clockwise to increase volume,
counterclockwise to decrease the volume.
STANDBY/ON
Switches the DVD/VCR Combi receiver ON and OFF.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck.)
Indicates current
audio stream.
WMA disc inserted
DVD/VCR Combi receiver is in VCR timer recording
mode or a VCR timer recording is programmed.
Indicates the unit is
radio mode.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is Recording a tape.
Indicates current
surround mode.
Indicates the unit is
playing back a tape
recorded in Hi-Fi.
Lights up when the FM
station tuned is trans-
mitting RDS data.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
RADIO DVD RDS
PROG
CHP/TRK
PROLOGIC II
COPY
REC
Hi-Fi
MUTE
MP3 TV
RPT ALL
VCD
ST
A
B
Total playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Indicates current chapter,
track number or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights up when a stereo broadcast is being received in radio mode.
JPEG disc inserted.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
OPEN/CLOSE, EJECT (Z)
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
CD/DVD/VCR select buttons
Select the output source (CD/DVD or
VCR) to view on the TV screen.
FM/AM Tuner select button
Select the DVD/VCR Combi receiver’s tuner
as the listening choice. (FM and AM bands)
AV
Selects the VCR deck’s source
(Tuner, AV1, AV2 or AV3).
SOUND MODE
Selects sound mode between BYPASS,
PRO LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
Switches DVD/VCR Combi receiver ON and
OFF.
0-9 numerical buttons
Selects numbered options in a menu.
PROGRAM
Accesses or removes Program menu.
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Press to clear preset stations from the
tuner memory.
EJECT
POWER
CD/DVD
OPEN/CLOSE
FM/AM
VCR
AV
DISPLAY, CLK/CNT
Accesses On-Screen display.
Switches among the clock, tape counter
and tape remaining modes on the display.
b/B/v/V (left/right/up/down)
- Selects an option in the menu.
PR/TRK/PRESET(v/V):
Select programme of VCR or Tuner
Adjusts manually the tape’s picture
onscreen.
PROGRAM CLEAR SOUND MODE AUDIO
RDS
To check the RDS service programme (PS).
SHOWVIEW
SHOWVIEW
RDS
To display the programme menu for
DISPLAY
CLK/CNT
PR/TRK/PRESET
SET UP/ i
TUNING (b/B):
To tune in the desired radio station.
RETURN
ShowView programming.
SET UP/ i
Access or remove setup menu.
OK/MEMORY/ENTER
-Enter a radio stations frequency into
the tuner.
-Displays functions on the TV screen.
-Acknowledges menu selection.
DISC MENU
Accesses menu on a DVD disc.
VOLUME (+/-)
Adjusts speaker volume.
MARKER
Marks any point during playback.
SEARCH
Displays MARKER SEARCH menu.
S-TITLE
Selects a subtitle language.
MUTE
Momentarily silence the speaker of the
DVD/VCR Combi receiver.
TV/VCR
Switch between your TV’s tuner
and the VCR’s internal tuner.
ZOOM
Enlarges DVD video image.
TITLE
Displays the disc’s Title menu,
if available.
REPEAT A-B/SPEED/REPEAT
- Repeat chapter, track, title, all.
- Repeats sequence.
TUNING-
TUNING+
DISC MEUN
Removes the setup menu.
REC/ITR (z)
Records normally or activates Instant
Timer Recording.
OK
MEMORY
ENTER
BACKWARD (.)
RETURN
DVD: Search backward*/go to beginning
of current chapter or track or go to
previous chapter or track.
VCR: Rewinds the tape in STOP mode
or for fast reverse picture search.
*Press and hold button for about two
seconds.
PR/TRK/PRESET
REC/ITR BACKWARD FORWARD
FORWARD (>)
DVD: Search forward*/go to next
chapter or track.
STOP
PAUSE/STEP PLAY
MARKER SEARCH
S-TITLE
MUTE
VCR: Advances the tape in STOP mode
or for fast forward picture search.
*Press and hold button for about two
seconds.
ANGLE REPEATA-B REPEAT
TV/VCR
STOP (Á)
Stops playback.
PAUSE/STEP (X)
CM SKIP
SPEED
TITLE
ZOOM
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
PLAY (G)
RAMDOM
Starts playback.
ANGLE
Selects a DVD camera angle if
available.
- Selects recording speed.
CM SKIP
Fast forwards picture search through 30
seconds of recording.
RANDOM
Play tracks in random order.
Note
This remote control use the same buttons for VCR and DVD functions (ex. PLAY).
To use the VCR, first press the VCR button.
To use the DVD, first press the CD/DVD button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
AC Power Cord
Plug into the power source.
ANT.IN
Connect the aerial using this jack.
EURO AV2
RF. OUT
Connect to a TV with RF cable.
(VCR IN+OUT/DVD OUT)
Connect to Set Top Box or
another video recorder.
FM ANTENNA CONNECTOR
Connect the FM antenna to this
terminal.
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six supplied speakers to these terminals.
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
Remote Control Operation Range
Remote control battery installation
Point the remote control at the remote sensor and
press the buttons.
Detach the battery cover on the rear
of the remote control, and insert two
ꢀ Distance: About 6m (20ft) from the front of the
remote sensor
R03 (size AAA) batteries with
aligned correctly.
and
ꢀ Angle: About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
TV & Set Top Box (or another VCR Connections)
TV & Set Top Box (or another VCR)
A
D
S
R
S-
IN
SCART INPUT
E
AERIAL
Rear of TV
• Make one of the following connections, depending
on the capabilities of your existing equipment.
Basic connections (RF)
1. Connect the aerial cable (A) from your indoor/ out-
door aerial to ANT.IN jack on the rear panel of
DVD/VCR Combi receiver.
Tips
• Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/VCR Combi receiver. Use one of
the connections described below.
2. Connect the supplied RF cable (R) from the
RF. OUT jack on the rear panel of DVD+VCR
Receiver to your television’s Aerial Input.
• Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/VCR
Combi receiver to the S-VIDEO IN jack on the TV
using the S-Video cable (S).
Caution
•
Make sure the DVD/VCR Combi receiver is connect-
ed directly to the TV. Select the correct AV input on
your TV.
Notes
• The signal of S-VIDEO OUT jack will output only
when the function mode is selected to CD/DVD.
• Do not connect your DVD/VCR Combi receiver to
TV via your DVD/VCR Combi receiver. The DVD
image could be distorted by the copy protection
system.
• When you connect the DVD/VCR Combi receiver to
your TV, be sure to turn off the power and unplug
both units from the wall outlet before making any
connections.
Basic connections (AV)
1. Connect the EURO AV1 AUDIO/VIDEO on the
rear panel of the DVD/VCR Combi receiver to the
scart input socket on the TV using a SCART lead
(E).
2. You can connect such a Set Top Box (or another
VCR) to the DVD/VCR Combi receiver (D).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive Scan (ColorStream® pro) connection
Rear of TV
Connect the EURO AV1 AUDIO/VIDEO socket on the
DVD/VCR Combi receiver to the COMPONENT
VIDEO INPUT(Y Pb Pr) jacks on the TV using the
SCART to RCA cable (Optional).
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO
/
SCART INPUT
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
ꢀ If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/VCR Combi receive progressive scan output
r
Pr(R)
Y(G)
Pb(B)
for the highest video resolution possible.
ꢀ If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Combi
receiver.
Notes:
• Set the Progressive Mode to “On” on the setup
menu for progressive signal, see page 24.
• Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the display
window.
Rear of DVD/VCR Combi receiver
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Caution:
You must set the TV Output Select option on the
setup menu to use Y Pb Pr or RGB signal from the
EURO AV1 AUDIO/VIDEO socket.
• Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack).
(See “TV Output Select” on page 24.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Audio/Video (A/V) Connections to
receiver
DVD/VCR Combi
Connect the AV3 jacks on the DVD/VCR Combi receiver to the audio/video out jacks on your accessory
component, using the optional audio/video cables..
PROG./
PRESET
Radio Aerial Connections
Connect the supplied FM/AM aerial for listening to the radio.
• Connect the AM loop aerial to the AM aerial connector.
• Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial (supplied)
AM Loop aerial (supplied)
Notes
• To prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components.
• Be sure to fully extend the FM wire aerial.
• After connecting the FM wire aerial, keep it as horizontal as possible.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker System Connection
Connect the speakers using the supplied speaker cords.
To obtain the best possible surround sound, adjust the speaker parameters; distance, level, etc..
Front Speaker
(Right)
Front Speaker
(Left)
Centre Speaker
Subwoofer
Rear Speaker
(Right Surround)
Rear Speaker
(Left Surround)
Notes
• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the
speakers.
• Do not remove the front cover of supplied speaker.
About Ferrite Core
Be sure to attach the ferrite core to the speaker cables
1
(for connecting to this unit).
This ferrite core can reduce noises.
a
a
How to attach the ferrite core
2
3
1. Push the stopper [a] of the ferrite core to open.
A
B
2. Wind the Subwoofer cable three times on the ferrite
core (A). Wind the Subwoofer cable once on the
ferrite core (B).
3. Pass the others straight on the ferrite core (B).
4. Close the ferrite core until it clicks.
Make the leagth here
as short as possible.
A
Notes
B
• Take care not to pinch the speaker cables between the
ferrite cores.
• Attach the ferrite core near the unit (Refer to the fig.3 and
comment.).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Positioning
In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and
subwoofer).
If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect
a subwoofer.
• Front speakers
According to your listening position set up the speakers for equal distance. And by hearing position set up the
interval between speakers to 45 degree.
• Centre speaker
The centre speakers and front speakers are ideally the same height. But normally place it above or below the
television.
• Rear speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required
for surround sound playback. For best results, do not install the rear speakers too far behind the listening
position and install them at or above the level of the listener’s ears. It is also effective to direct the rear speak-
ers towards a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 - 90 cm than the listener’s ears.
• Subwoofer
This can be placed in any front position.
Subwoofer
Centre Speaker
Front Speaker
Front Speaker
(Left)
(Right)
Rear Speaker
Rear Speaker
(Right)
(Left)
Speaker Positioning Example
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3D SURROUND
Mini Glossary for Audio Stream
& Surround mode
This unit can produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lis-
ten to multi-channel audio from a home theatre. This feature
works with DVD discs encoded with Dolby Pro Logic and
Dolby Digital audio tracks.
Allows you to enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
DTS Digital Surround delivers up to 6 channels of transpar-
ent audio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
sound field. The term DTS is a trademark of DTS
Technology, LLC. Manufactured under license from DTS
Technology, LLC.
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital pro-
program you want to listen to.
gram source. If you play DVDs with “
” mark, you can
enjoy even better sound quality, greater spatial accuracy,
and improved dynamic range.
Press SOUND MODE repeatedly until the sound
mode you want appears in the display window as
below.
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
Use this mode when playing movie or Dolby Digital 2 chan-
nel which carries the “
” mark. This mode provides the
PRO LOGIC → PL2 MOVIE → PL2 MUSIC → PL2 MATRIX
→ 3D SURROUND → BYPASS
effect of being in a movie theatre or live concert house-an
effect with an intensity which can only be obtained through
DOLBY PRO LOGIC SURROUND. The effect of the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clear-
er and more dynamic than before.
When DVD is inserted.
You can change the stream of DVD (Dolby Digital, DTS,
PCM, etc) by pressing the AUDIO button on the remote dur-
ing playback.
Although the DVD contents differ from disc to disc, the fol-
lowing explains the basic operation when this feature is
used.
(II)
Dolby Pro Logic II creates five full-bandwidth output chan-
nels from two-channel sources. This is done using an
advanced, high-purity matrix surround decoder that extracts
the spatial properties of the original recording without adding
any new sounds or tonal colorations.
Each time you press AUDIO button, the sound mode of DVD
is changed as the following order;
→
→
→
MOVIE mode:
The Movie mode is for use with stereo television shows and
all programs encoded in Dolby Surround. The result is
enhanced soundfield directionality that approaches the quality
of discrete 5.1-channel sound.
For your reference
•
The DVD/VCR Combi receiverr memorizes the
MUSIC mode:
last mode
The Music mode is for use with any stereo music recordings,
and provides a wide and deep sound space. The Music mode
includes controls that allow the sound to be tailored to individ-
ual listening tastes.
settings for each source individually.
You can identify the encoding format of
program software by looking at its packaging.
•
- Dolby Digital discs are labeled with the
logo.
MATRIX mode:
- Dolby Surround encoded programs are labeled
The Matrix mode is the same as the Music mode except that
the directional enhancement logic is turned off. It may be used
to enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause disturbing surround signals from a logic decoder. The
ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
with the
logo.
- DTS Digital Surround discs are marked with DTS.
Note
• When you play sound tracks with 96kHz sampling
frequency, the output signals will be converted to 48kHz
(sampling frequency).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-VCR part
Tuning in a video channel on your TV
Notes
• The output frequency of this video recorder (VCR) is
set at UHF channel 60. If channel 60 is already
used by another TV station, or if the picture is
distorted, you can change the transmitter channel of
your DVD/VCR Combi receiver. Stages 5 ~ 8 will
show you how to change the output frequency of
your DVD/VCR Combi receiver.
RF CHANNEL 60
P
SET
i
R
7. Press PROG. + or - to select another video channel.
You may select any channel number between 22
and 68.
You can also set it to “OFF” if there is any interfer-
ence when your TV is connected to the DVD/VCR
Combi receiver with a SCART lead.
• Your TV receives signals from the video recorder
(VCR) like another TV station. You have to select a
channel number on your TV and tune it in so that
you may watch video tapes. If you have used a
SCART cable then your TV should already have a
dedicated video channel built into it, usually
called AV.
8. Select a TV channel number on which you wish to
watch video’s. Press STANDBY/ON on the front
of your DVD/VCR Combi receiver when you have
finished. Tune this channel so that a bright blue
screen appears. Store this channel on your TV.
1. Make sure that you have correctly installed your
VCR as described earlier in this book.
Press POWER to turn on your DVD/VCR Combi
receiver. Turn on your TV.
Notes
Make sure that you have correctly installed your
DVD/VCR Combi receiver and successfully tuned in a
dedicated video channel on your TV. If you do not
tune in a dedicated video channel on your TV you will
be unable to view and record video tapes!
2. Insert a pre-recorded video tape into your
DVD/VCR Combi receiver and press PLAY on the
remote control. Select a TV channel number on
which you wish to watch video’s.
Don’t worry if you don’t have a video-tape to play
at this stage! If you switch your DVD/VCR Combi
receiver on and continue stages 3 ~ 4, instead of
seeing video playback tune your TV until you see
a bright blue screen.
Using your VCR for the very first
Initial preset
For the following steps we do assume that you have
just connected your video recorder for the very first
time. In this case the video recorder is on after mains
connection. You should not touch any buttons yet. On
the connected TV you will now see.
3. Tune this channel until the video picture is sharp
and the sound is clear.
If you have used a SCART cable you will not
have to tune your TV, simply select the AV
channel. The AV channel is already pre-tuned for
optimum video playback on your TV.
Note - If this menu does not appear, your video
recorder was programmed already.
1. Select the country according to your area with
F and G.
4. Store this channel on your TV.
“A”: Austria, “B”: Belgium, “CH”: Switzerland, “D”:
Germany, “DK”: Denmark, “E”: Spain, “F”: France,
“I”: Italy, “N”: Norway, “NL”: Netherlands, “P”:
Portugal, “S”: Sweden, “SF”: Finland, OTHERS.
You will need to look at the TV instruction book if
you do not know how to do this.
5. Only carry out stages 5 ~ 8 if you cannot
obtain clear video playback as described in
stages 1 ~ 4. Select a TV channel number on
which you wish to watch video’s.
A
N
B
NL
CH
P
D
S
DK
E
F
I
SF OTHERS
Make sure that your DVD/VCR Combi receiver is
in standby pressing POWER on the remote control
(only the clock will be displayed).
Pr-12
OK
i
ACMS
2. Press OK to start the automatic storing of the
channels of the TV stations in your area.
6. Press PROG. + or - on the front of your DVD/ VCR
Combi receiver for more than 4 seconds.
RF60 will appear in the display window.
The following picture will be displayed on the TV
screen.
01
C02
00 PR-01
S
E
Pr-12
ACMS
i
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock Manually
To set the colour system
The clock in your DVD/VCR Combi receiver controls
time and date settings for your DVD/VCR Combi
receiver.
1. Press i.
2. The main menu will appear on the TV screen.
3. Press 1 or 2 to select the SYSTEM and press OK.
1. Press i.
4. Press 3 or 4 to select according to the COLOUR
Press 1 or 2 to select TIME DATE.
Press OK.
system used.
HH MM DD MM YY
:
-
-
.
.
- - - - -
- -
- -
- -
VCR
AUTO
1
2
SYS-
TEM Dr.
REC
SYS-
TEM
TIME
PAL
i
MESECAM
OPR
DATE
f
OSD
ON
OFF
i
4:3
2. Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
5. Press 1 or 2 to select the RF AUDIO.
Press 3 or 4 to select according to the RF AUDIO
used.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically
when you enter the year.
VCR
RF I/I
SYS-
REC
RFB/G
RF D/K
TEM Dr.
SYS-
TEM
f
OS
ON
OFF
i
OPR
4:3
HH MN DD MM YY
8
:
00
1
.
01
.
04 THU
1
2
TIME
i
DATE
6. Press i to remove the menus from the TV screen.
3. If you make a mistake press 1 or 2 and enter the
correct details.
4. Press i.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the main menu
Tuning in TV Stations Automatically
This DVD/VCR Combi receiver can easily be
programmed by using the menus displayed on
screen. The menus are controlled from the Remote
Control Handset.
1. Switch on your TV set and DVD/VCR Combi
receiver by pressing the POWER button.
If the TV broadcast signal is weak your DVD/VCR
Combi receiver may not detect the necessary
information and will not be able to store them
correctly. To overcome this problem please turn to
the MANUAL TUNING section on page 20.
2. Press i button.
1. Press POWER to turn on your DVD/VCR Combi
The main menu will appear on the TV screen.
receiver.
2. Press i button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS. Press OK.
VCR
1
2
Pr-12
P
TIME SYS-
SET
REC
ACMS
R
Dr.
DATE
NIC
TEM
REC
OK
f
OSD
ON
OFF
16:9
4:3
i
OPR
• REC
VCR
1
2
Timer recording setting (see p. 30).
• PR SET
Pr-12
P
TIME
SYS-
TEM
SET
REC
ACMS
R
Dr.
DATE
Pr-12
NIC
f
ACMS
OSD
ON
OFF
16:9
4:3
OPR
OK
i
Manual tuning setting (see p. 20).
• ACMS
ACMS (Automatic Channel Memory System)
(see right column).
• TIME DATE
A
N
B
NL
CH
P
D
S
DK
E
F
I
SF OTHERS
Date & clock setting (see p. 18).
• SYSTEM
Pr-12
ACMS
OK
i
To set the Colour TV System (see p. 18).
• Dr.
To check a problem with your DVD/CD/VCR
receiver (see p. 42).
3. Press 1 or 2 to select COUNTRY.
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, OTHERS)
Press OK again to start the automatic tuning
process.
• fOSD ON/OFF
To display the operational mode of your DVD/VCR
Combi receiverr (see p. 42).
• 16:9/4:3
To select the aspect ratio of your TV (see p. 43).
• OPR
01
02
03
C02
C03
C04
00
00
00
PR-01
PR-02
PR-03
To improve the playback picture (see p. 27).
S
E
• NIC
Pr-12
i
ACMS
To activate or deactivate the NICAM digital sound
(see p. 43).
4. Press i to remove the menus from the TV
screen.
Tip:
Press i to save your settings.
You can change the menu language on the DVD
setup menu. (See the Menu Language on page 23.)
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
3. Press 1 or 2 to select the desired menu.
Press OK and press 3 or 4 to select.
MOVE :
DELETE :
5. Press i to return to a TV picture.
P
SET
,
OK
i
R
19
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press 2 to select STATION so that you may name
your TV station.
Tuning in TV Stations Manually
In certain areas of the country broadcast signals may
be too weak for your DVD/VCR Combi
receiver automatic tuning process to find or assign TV
stations correctly.
You must tune in these weaker broadcast
stations manually in order for your DVD/VCR Combi
receiver to store them.
Press OK.
The TV station name list will appear.
TNT
MTV3
NELON
TRT
PR
09
CH
C10
MFT
00
RTL4
TELEC
RETEA
RETE4
P
SET
OK
i
R
1. Press i.
6. Press D or E to select a station name from the list.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press OK.
Press OK to select it.
If your station name isn’t on the list do not press
OK, but go to stage 7.
PR
01
CH
C 02
MFT
00
STATION
PR-01
TNT
MTV3
NELON
TRT
VCR
1
2
Pr-12
P
TIME SYS-
SET
REC
ACMS
R
Dr.
DATE
NIC
TEM
P
SET
CHANNEL/CABLE : AV
R
PR
09
CH
C10
MFT
00
RTL4
f
OSD
ON
OFF
16:9
4:3
P
OK
i
SET
TELEC
RETEA
RETE4
i
OPR
R
2. Press i.
The station table will appear.
P
SET
OK
i
R
Press 3 or 4 to select the programme number
that you want to tune (for example, PR 09).
7. You can change a TV station name manually
rather than using the “standard” names.
Press G.
Press 3 or 4 to select letters and numbers for
the new station name.
PR
01
CH
C 02
MFT
00
STATION
PR-01
Press 1 or 2 to move back and forth between
characters.
CHANNEL/CABLE : AV
P
SET
i
R
Press OK.
3. Press OK.
Press AV to select C (Standard stations) or S
(Cable stations):
PR
C09
CH
C10
MFT
00
STATION
MTV3
C02 - C69, S01 - S41.
Enter the channel number of station that you want
P
SET
i
OK
R
to tune with the numbered buttons or use 3 or 4
to find the required station.
8. Press i, confirm the station placement.
Press i again.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
Your new TV station has now been tuned into your
DVD/VCR Combi receiver
.
If you wish to manually tune other stations repeat
stages 1 - 8.
MOVE :
DELETE :
P
SET
,
OK
i
R
09
C10
00
MTV3
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
10
11
12
13
14
15
16
4. Searching will stop when it locates a station.
Press 2 to select MFT.
Press 3 or 4 to adjust.
MOVE :
DELETE :
P
,
OK
i
SET
R
PR
09
CH
C10
MFT
00
STATION
CHANNEL/CABLE : AV
P
i
SET
R
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the order of TV Stations
Deleting TV Stations
After tuning TV stations into your DVD/VCR Combi
receiver you may wish to change the order in which
they are stored without having to retune them against! The
instructions given on this page will show you how you
can simply move them into your desired order.
After tuning TV stations into your DVD/VCR Combi
receiver you may wish to delete a station.
The instructions given on this page will show you how
easily delete any unwanted TV stations.
1. Press i.
1. Press i.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press OK.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press OK.
PR
01
CH
C 02
MFT
00
STATION
PR-01
PR
01
CH
C 02
MFT
00
STATION
PR-01
VCR
1
2
Pr-12
P
TIME SYS-
SET
REC
ACMS
R
Dr.
DATE
NIC
TEM
P
CHANNEL/CABLE : AV
SET
R
f
OSD
ON
OFF
VCR
1
2
P
SET
R
16:9
4:3
OK
i
i
Pr-12
OPR
P
TIME SYS-
SET
REC
ACMS
R
Dr.
DATE
NIC
TEM
P
SET
CHANNEL/CABLE : AV
R
f
OSD
ON
OFF
16:9
4:3
P
OK
i
SET
i
OPR
R
2. Press i.
2. Press i.
Press 3 or 4 to select the programme number
you want to delete. (for example, PR 03)
Press 3 or 4 to select the programme number
you want to move (for example, PR 03).
Press 2.
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
01
02
03
04
05
06
07
08
C02
C03
C04
C05
C06
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
01
02
03
04
C02
C03
C04
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-08
MOVE :
DELETE :
C05
P
SET
,
OK
i
R
05
06
07
08
C06
C07
C08
C09
00
00
3. Press 1.
MOVE :
DELETE :
P
SET
,
OK
i
P
After a short while, the selected station will be
R
SET
OK
i
R
deleted.
3. Press 3 or 4 to select the programme number
01
02
03
04
05
06
C02
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
you want to move to (for example, PR 05).
C03
C05
C06
C04
C07
00
00
00
00
00
01
02
03
04
05
06
07
08
C02
C03
C05
C06
C04
C07
C08
C09
00
00
00
00
00
00
00
00
PR-01
PR-02
PR-04
PR-05
PR-03
PR-06
PR-07
PR-08
07
08
C08
C09
00
00
PR-07
PR-08
MOVE :
P
,
DELETE :
OK
i
SET
R
4. Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages 1 - 3.
P
SET
OK
i
R
4. Press OK.
01
02
03
04
05
06
07
08
C02
C03
C06
C04
C07
C08
00
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
PR-06
The selected programme will be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1 - 4.
Press i to remove the menus from the TV screen.
C09
C10
00
00
PR-07
PR-08
MOVE:
P
DELETE :
,
OK
i
SET
R
01
02
03
04
05
C02
C03
C05
C06
C04
00
00
00
00
00
PR-01
PR-02
PR-03
PR-04
PR-05
How to selecting Stored TV stations:
06
07
08
C07
C08
C09
00
00
00
PR-06
PR-07
PR-08
Stored TV stations can be selected in either of two
ways.
MOVE :
P
DELETE :
,
OK
i
SET
R
Press 3 or 4 to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations using the
numbered buttons on the remote control.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation-DVD part
On-Screen Display
Example: On-Screen Display during
playing DVD Video
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Items
Selection Method
b
/
B
ENTER
, Numbers
Title Number
1 / 3
1. Press DISPLAY during playback.
b
/
B
ENTER
, Numbers
Chapter Number
Time search
1 / 12
2. Press v / V to select an item.
The selected item is highlighted.
Numbers, ENTER
0:20:09
3. Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Audio language
and Digital Audio
Output mode
b
AUDIO
/
B
or
b
/
B
or
Subtitle language
Angle
ABC
1 ENG
1 / 3
Notes:
S-TITLE
• Some discs may not provide all of the features
shown below.
b
ANGLE
/
B
or
3D SUR
• If no button is pressed for 10 seconds, the on-
screen display disappears.
Sound
b
/
B
Playback Status/Restrictions
Example: On-Screen Display during
playing VCD
TITLE
Repeat title
A - B
Repeat sequence
Items
Selection Method
1 / 9
Enter a Marker
b
/
B, Numbers
ENTER
Track Number
(or PBC mode)
1 / 3
MARKER SEARCH
Marker Search menu
1
2
3
4
5
6
7
8
9
Numbers
ENTER
Time search
Resume play from this point
Action prohibited or not available
0:20:09
b
/
B
or
Audio Channel
Sound
STEREO
3D SUR
AUDIO
b
/
B
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
b
/
B
ENTER
, Numbers
Track Number
1 / 3
Numbers, ENTER
Time search
0:20:09
Audio language
and Digital Audio
Output mode
1
b
AUDIO
/
B
or
MP3
b
/
B
or
Subtitle language
Sound
ENG
ABC
S-TITLE
3D SUR
b
/
B
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE
Initial Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 23 to 26.
English
Original
Off
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Original
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
Move
Select
Menu Language
To go to the next level:
Select a language for the Setup menu and on-screen
display.
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
DVD
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
General Operation
1. Press SETUP. The Setup menu appears.
Original: Refers to the original language in which the
disc was recorded.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Other: To select another language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
3. Use v / V to select the second desired option then
press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Pressing ENTER will set this unit to Progressive
scan mode.
DISPLAY
DISPLAY
TV Aspect
16
:
9 Wide
Caution:
Display Mode
Progressive Scan
TV Output Select
Widescreen
Off
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
On in error, you must reset the unit.
RGB
1) Remove any disc from the unit and close the disc tray.
See that “NO DISC” is displayed on the display window.
2) Press STOP and hold it for five seconds before releas-
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
Move
Select
DVD
TV Aspect
4:3 : Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
TV Output Select
DVD
Display Mode
Set this unit TV Output Select options according to the
TV connection type.
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
YPbPr: When your TV is connected with the COMPO-
NENT/PROGRESSIVE SCAN VIDEO OUT jacks on
this unit.
LetterBox: Displays a wide picture with bands on the
upper and lower portions of the screen.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
AUDIO
Progressive Scan
Each DVD disc has a variety of audio output options.
Set this unit AUDIO options according to the type of
audio system you use.
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for con-
nection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
AUDIO
5.1 Speaker Setup
Select
DRC
On
On
To turn On progressive scan:
Vocal
Connect component out of this unit to the input of
your monitor/television, set your television or monitor
to Component Input.
1. Select “Progressive Scan” on the DISPLAY menu
Move
Select
then press B.
DISPLAY
DVD
5.1 Speaker Setup
TV Aspect
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Display Mode
Progressive Scan
TV Output Select
On
Off
Speaker settings are only active on the Analog Multi-
Channel Output. (See “Speaker Settings”, page 39.)
DVD
DivX
Dynamic Range Control (DRC)
Prev.
Move
Enter
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
2. Select “On” using the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan on the DVD Player.
Vocal DVD
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b button
to highlight Enter.
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
DivX(R) VOD DivX
The PBC, Auto Play and DivX(R) VOD settings can be
changed.
You can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
OTHERS
PBC
On
DivX(R) Video On Demand
Auto Play
Off
Select
DivX(R) VOD
Your registration code is : XXXXXXXX
To learn more visit
(Done)
Select
Move
The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rent an
encrypt move file.
PBC VCD
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the
PBC.
Notes:
If you rent the DivX VOD file, it has several options of
viewing limits as shown below.
Off: Video CDs with PBC are played the same way as
Audio CDs.
• Display the number which you can watch the file.
DVD
Auto Play
View DivX(R) VOD Rental
This rental has 3 views left.
You can set up the DVD Player so a DVD disc auto-
matically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
Do you want to use one
of your 3 views now?
(Yes) (No)
On: Auto Play function is active.
Off: Auto Play function is not active.
• The rental has been expired.
Notes:
The Auto Play function may not work for some DVDs.
Rental Expired
(Done)
• Display the authorization error.
Authorization Error
This player is not authorized
to play this video.
(Done)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Password (Security Code)
LOCK (Parental Control)
LOCK
You can enter or change password.
Rating
Unlock
New
1. Select Password on the LOCK menu then press B.
Password
Country Code
H U
2. Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3. Enter the new 4-digit code, then press ENTER.
Input it again to verify.
Move
Select
4. Press SETUP to exit the menu.
Rating DVD
If you forget your Security Code
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer more suitable scenes as an
alternative.
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
The parental control feature allows you to block
access to scenes below the rating you input, there by
preventing your children from being able to view
material you believe is unsuitable.
3. Enter a new code as described above.
DVD
Country Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter.
1. Select “Rating” on the LOCK menu then
press B.
2. To access the Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
1. Select “Country Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select the first character using v / V buttons.
4. Shift the cursor using B button and select the
second character using v / V buttons.
3. Select a rating from 1 to 8 using the v / V buttons.
5. Press ENTER to confirm your country code
selection.
Rating 1-8: Rating one (1) has the most restric-
tions and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
To switch off the slow motion and shuttle, press the
desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of
tape.
If distortions can be seen in the picture, reduce
them with D or E.
Playing a Tape
You will only be able to load and eject video cassettes
when your DVD/VCR Combi receiver is plugged into
the mains. Your DVD/VCR Combi receiver may also
playback recordings from NTSC tapes (on PAL TV).
Getting a better picture
When a cassette is inserted and playback started, the
automatic tracking function works to get the best possi-
ble picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4on the remote control or
press PROG. + or - on the front pannal to manually
adjust the tracking until any distortions have been
removed. Press numbered 0 on the remote control to
switch automatic tracking back on again.
6. Press STOP to end playback.
Press EJECT.
If the end of the tape is reached, your DVD/VCR
Combi receiver will stop playback automatically,
rewind, stop, eject the tape.
1. Make sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
CM (Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Turn on your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
into your DVD/VCR Combi receiver. The video cas-
sette should have the window side facing up and
the arrow facing away from you.
Repeatedly press CM SKIP to skip:
1 Press 30 seconds
2. Press PLAY to start playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
cassette will start automatically.
2 Press 60 seconds
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
AUTO TRACKING
Your DVD/VCR Combi receiver will automatically
adjust the tracking to give the best picture quality.
OPR (Optimum Picture Response)
This feature automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
the condition of the tape.
3. Press PAUSE/STEP to still a picture.
Press PAUSE/STEP repeatedly to advance the
tape frame by frame.
1. Press i.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Tapes can be paused for up to 5 minutes. After 5
minutes your DVD/VCR Combi receiver will stop
the tape to prevent damaging the tape or your
DVD/VCR Combi receiver. Still picture quality can
be improved slightly by pressing 3 or 4.
2. Press 1 or 2 to select OPR.
3. Press OK.
VCR
1
2
OFF
4. Press PLAY to continue playing your tape.
Picture search:
12
SYS-
TEM Dr.
TIME
R
MS
SOFT
DATE
NIC
SHARP
OPR
f
ON
OFF
16:9
4:3
i
OPR
During playing back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
where you are on the tape.
4. Press 3 or 4repeatedly to select: OFF, SOFT or
SHARP.
Please note you may only set OPR when
playing a tape.
Logic search:
5. Press i return to screen.
During fast forwarding or rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
5. Slow motion playback, Shuttle :
During playing back or still picture press F or G.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press SPEED if you wish to record in Long Play or
Standard Play.
Instant Timer Recording (ITR)
SP will produce improved picture and sound
quality, however LP will provide twice as much
recording time as SP.
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
Instant Timer Recording (ITR) start recording immedi-
ately for a set period of time or until the video cassette
runs out.
6. Press REC/ITR to start recording.
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Your DVD/VCR Combi receiver incorporates Long Play
(LP) which enables you to record up to twice the
amount of time on a video cassette. For example an E-
180 will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360 min-
utes. Please note there will be a slight loss in picture
and sound quality when using LP.
7. Press PAUSE/STEP to avoid recording unwanted
scenes.
Press PAUSE/STEP to continue recording.
If you press PAUSE/STEP during ITR, this
DVD/VCR Combi receiver will enter the record
pause mode and ITR is cancelled.
1. Make sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
Tapes can be paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
DVD/VCR Combi receiver.
Press POWER to turn on your VCR.
2. Insert a video cassette with protection tab into
your DVD/VCR Combi receiver.
8. Press STOP to end recording.
Press EJECT.
The video cassette should have the window side
facing up and the arrow facing away from you.
EJECT will appear on the TV screen for a few
seconds.
3. Press PR v or V to select the programme
number you wish to record.
Notes:
You may also directly select programme number
using the numbered buttons on the remote
control.
ꢀ If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
cassette.
4. If you wish to record directly from the SCART
sockets repeatedly press AV until the socket you
wish to record from is displayed.
ꢀ It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.
AV 1 for recording from EURO AV1 SCART socket
on the rear of your DVD/VCR Combi receiver.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your DVD/VCR Combi receiver.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) sockets on the front of your
DVD/VCR Combi receiver.
ꢀ Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PR
PR-01 12
DATE
TIME
ShowView Programming
SP
SP
SP
SP
SP
SP
SP
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
ShowView greatly simplifies entering the date,
channel, start and end times of a Timer
Recording by simply entering a ShowView Code.
ShowView Codes are published in most TV
guide magazines; they can vary one to nine
numbers in length.
i
7. Press D or E to switch VPS/PDC on or off.
Press G to select the recording speed.
Press D or E to select the desired tape speed (SP,
IP, or LP).
SHOWVIEW is a registered trademark of Gemstar
Development Corporation.
The SHOWVIEW system is manufactured under
licence from Gemstar Development Corporation.
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON. Check that the
timer event details are correct. If you wish to record
from AUDIO IN and VIDEO IN on the front or from
either of the EURO SCART sockets on the back of
DVD/VCR Combi receiver, press AV to select for
correct display (AV1, AV2 or AV3).
1. Make sure that TV channels have been tuned and
stored in correct SHOWVIEW order. Insert a video
cassette with protection tab into your DVD/VCR
Combi receiver.
PR
DATE
TIME
PR-01 12
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
SHOWVIEW NO.
- - - - - - - - -
ONCE
0~9,
OK
i
REC
i
2. Press SHOWVIEW.
8. If you want to make another ShowView recording
repeat stages 2 - 7. Press i twice.
3. Press D or E to select the recording type.
ONCE: To record once.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
WEEKLY: To record at the same time every week.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
Press POWER to switch your DVD/VCR Combi
4. Press the numbered buttons to enter the
ShowView Code of the TV programme that you
wish to record.
receiver power off mode.
will appear in the video
recorder’s display while your DVD/VCR Combi
receiver waits to make the recording.
To watch a DVD during timer recording standby
mode, press POWER and DVD to switch to DVD
mode.
If you make a mistake press F then enter the
revised number.
9. Press STOP to end recording.
SHOWVIEW NO.
246876543
Notes
• Video Programme System (VPS)
ONCE
0~9,
OK
i
REC
The Video Programme System (VPS) ensures that
the TV programmes that you have programmed for
timer recording will be recorded exactly from their
beginning to end, even if the actual broadcasting
time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted,
for example, if a news flash is inserted, the record-
ing will also be interrupted automatically and
resumed when the programme continues.
The VPS signal is broadcast by the TV station and
this controls the timer in the video recorder.
VPS should be set ON for all timer recordings from
TV stations broadcasting these signals. It should be
set OFF for all timer recordings from TV stations that
are not broadcasting these signals.
5. Press OK.
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number,
entered the ShowView number incorrectly.
If “- -” is displayed, you have to enter the
programme number of the station, you want to
record from.
PR
PR-01 12
DATE
TIME
10:11~11:55
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
i
6. Press F or G to select the settings that you wish to
revise. (PR, DATE, TIME, VPS and SP).
Press D or E to enter the correct information.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press the numbered buttons to enter the recording start
and end times of the programme that you wish to record.
Please note your DVD/VCR Combi receiver uses a
24 hour clock. e.g. 1pm will be displayed as 13:00.
You may also select the the start and end times by
pressing 3 or 4.
Timer recording using On Screen
Display
You may set up to seven timer record events within one
month of the current date.
Note
Before setting the timer make sure that you have set the
DVD/VCR Combi receiver clock correctly and you
know which stations you have tuned TV stations on
your DVD/VCR Combi receiver.
1. Insert a video cassette with protection tab into your
DVD/VCR Combi receiver.
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
16
- -
- -
- -
- -
- -
- -
T
I
M
E
19:00~ 20:00
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
SP
SP
SP
SP
SP
SP
SP
i
The video cassette should have the window side
facing up and the arrow facing away from you.
7. Press 3 or 4to switch VPS on or off.
Press 2 to select the recording speed.
Press 3 or 4to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS is ON.
2. Press i.
Press 1 or 2 to select REC.
Press OK.
3. Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4to
select the event that you wish to remove and
replace. Press 1 to delete the event.
PR
DATE
16
- -
- -
- -
- -
- -
- -
T
I
M
E
19:00~ 20:00
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
PR-01
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
PR
DATE
- -
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -
- -
- -
- -
- -
- -
- -
SP
SP
SP
SP
SP
SP
SP
- -
- -
i
i
8. Check that the timer event details are correct.
Press i twice.
4. Press the numbered buttons to enter the station
that you wish to record.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your DVD/VCR Combi
When selecting stations 1 - 9, press 0 first, then
the channel number; for example Stations 3 - 03.
You may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
receiver Standby.
will appear in the display win-
dow while your DVD/VCR Combi receiver waits to
make the recording. To watch a DVD during timer
recording standby mode, press POWER and DVD
to switch to DVD mode.
9. Press STOP to end recording.
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
- -
- -
- -
- -
- -
- -
- -
T I M E
- -: - -~ - -: - -
- -: - -~ - -: - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
- -: - -~- - : - -
Notes
•
SP
SP
SP
SP
SP
SP
SP
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4to select the event that you wish to delete or
change.
i
5. Press the numbered buttons to enter the date of
the programme. If you press OK before entering
the date you may select one of the following
automated recording features. Press 1 or 2 to
select, then press OK to confirm.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3
or 4to enter the correct information.
• If Timer record events Overlap...
DLY To record every day (except Saturday and
Sunday) at the same time.
SU~SA To record at the same time every week.
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier
programme will always be given priority.
Example:
PR
PR-01
- -
- -
- -
- -
- -
- -
DATE
T
I
M
E
- -: - -~ - -: - -
16
- -
- -
- -
- -
- -
- -
SP
Programme 1 is programmed to start at 16:00 and end at
17:00.
- -: - -~ - -: - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
- -: - -~- - : - - SP
Programme 2 is programmed to start at 16:30 and end at
17:30.
DLY SU MO TU WE TH FR SA
OK
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
i
30
Download from Www.Somanuals.com. All Manuals Search And Download.
If Timer record events Overlap...
Change (Deleting) the Timer Programme
Do not overlap programmes, since overlapping por-
tions of the conflicting programmes will not be record-
ed. Earlier recording times have priority over later
recording times as shown in the diagram.
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press D
or E to select the event that you wish to delete or
change. Press F to delete the event...or
Example:
Programme 1 will be recorded in its entirety, but only
the last 30 minutes of Programme 2 will be recorded.
Press OK to change, then press F or G to select;
Station, Date, Start and End times and LP.
Press D or E to enter the correct information.
PROGRAMME 1
17:00
16:00
17:30
16:30
PROGRAMME 2
(This portion will not be recorded.)
If two programmed timer recordings overlap at midnight
00:00 a.m., programme 2 will not be recorded.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
Playing a DVD or Video CD
Note:
Playback Setup
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.
1. Turn on the TV and select the video input source
connected to the DVD/VCR Combi receiver.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD/VCR
Combi receiver.
DVD
Moving to another TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY while playback is
stopped then the appropriate number (0-9) or use
b / B to move to another title.
3. Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the play-
back side down.
You can play any title by inputting its number while
4. Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
press PLAY.
playback is stopped.
Moving to another CHAPTER/TRACK
In some cases, the disc menu might appear
instead:
DVD
VCD
DivX
DVD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to anoth-
er chapter/track as follows:
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
•
Press . or > briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
VCD
•
•
Press . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating proce-
dures may differ. Follow the instructions on the
each menu screen. You also may set PBC to Off
(See “PBC” on page 25).
Notes:
DVD
VCD
DivX
Search
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 26.)
1. Press and hold . or > for about two seconds
during playback.
The player will now go into SEARCH mode. .
• DVDs may have a region code. Your player does
not play discs that have a region code different from
your player. The region code for this player is 2
(two).
2. Press and hold . or > repeatedly to select
the required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
• To watch a DVD during timer recording standby
mode, press POWER and DVD to switch to DVD
mode.
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
3. To exit SEARCH mode, press PLAY.
Changing the Audio Channel VCD
Press AUDIO repeatedly during playback to hear a dif-
ferent audio channel (Stereo, Left, or Right).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Picture and Frame-by-Frame Playback
Repeat DVD
VCD
DivX
DVD
VCD
DivX
You can play a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
1. Press PAUSE/STEP on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
2. To exit still motion mode, press PLAY.
Slow Motion DVD
VCD
DivX
• Off : does not play repeatedly.
Video CDs - Repeat Track/All/Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
1. Press PAUSE/STEP (X) during playback.
The DVD/VCR Combi receiver will now go into
PAUSE mode.
2. Press . or > during pause.
Notes:
The player will enter SLOW mode.
• On a Video CD with PBC, you must set PBC to Off
on the setup menu to use the repeat function (See
“PBC” on page 25).
Use the . or > to select the required speed:
t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or
T 1/16, T 1/8, T 1/4 or T 1/2 (forward).
• If you press > once during Repeat Chapter (Track)
playback, the repeat playback cancels.
3. To exit Slow Motion mode, press PLAY.
Note:
3D Surround DVD
VCD
DivX
Slow motion playback in reverse is not possible with
Video CDs and DivX Discs.
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
Random VCD
Karaoke DVD
1. Press RANDOM during playback or in stop mode.
The unit automatically begins random playback
and RANDOM appears on the TV screen.
1. Press DISPLAY during playback.
2. Use 3 or 4 to select the sound option.
The sound option will be highlighted.
2. Press RANDOM again to normal.
3. Use 1 or 2 to to select “3D SUR”.
Tip:
To turn off the 3D Surround effect, select “Normal”.
By pressing . or > during Random playback,
the unit selects another title (track) and resumes
Random playback.
Time Search DVD
VCD
DivX
To start playing at any chosen time on the disc:
Note:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
On a Video CD with PBC, You must set PBC to Off on the
setup menu to use the random function (See “PBC” on page
25).
2. Press v / V to select the time clock icon and
“-:--:--” appears.
Repeat A-B DVD
VCD
DivX
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
To repeat a sequence.
1. Press A-B at your chosen starting point. “ A * ”
appears briefly on the TV screen.
4. Press ENTER to confirm. Playback starts from the
selected time.
2. Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press A-B again to cancel.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Special DVD Features
Zoom DVD
VCD
DivX
Use zoom to enlarge the video image.
Checking the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
MENU. Input the corresponding number or use the b
B v V buttons to highlight your selection. Then press
ENTER.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
Title Menu DVD
Screen fit mode:
You can change the way the image appears on
the screen when you’re playing a DVD movie.
Press 3/4 to select between Normal, Enhanced,
and Maximum.
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may appear.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and
chapters for the title.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press ZOOM
repeatedly or CLEAR button.
3. Press TITLE to exit.
Notes:
Disc Menu DVD
• Zoom may not work on some DVDs.
• Screen fit mode is available for playing the DVD
disc, VR disc and movie file.
Press DISC MENU and the disc menu is displayed.
Press DISC MENU again to exit.
Marker Search DVD
To enter a Marker
VCD
DivX
Camera Angle DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
Changing the Audio Language DVD
DivX
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, press CLEAR and the marker
number is erased from the list.
Subtitles DVD
DivX
4. You can play any marker by inputting its number
on the marker search menu.
Press S-TITLE repeatedly during playback to see the
different subtitle languages.
Note:
• The subtitle file of the DivX file is displayed only
smi, srt and sub.
• If there is no information or there is a code that can
not read in the DivX file, “ 1 ” or etc. are displayed.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA
Disc
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
The DVD/VCR Combi receiver can play MP3/WMA
formatted recordings on CD-ROM, CD-R, or CD-RW
discs.
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
AUDIO CD
0:52:07
1 / 12
List
Program
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as /
? * : “ < > l etc.
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Track8
Clear All
• The total number of files on the disc should be
less than 650.
PROGRAM Edit
This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see
above) to ensure compatible playback.
MP3 / WMA
1. Press v / V to select a folder, and press ENTER
to see the folder contents.
2. Press v / V to select a track then press PLAY or
ENTER. Playback starts.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Clear All
DISPLAY Info
PROGRAM Edit
Tip:
• If you are in a file list on the MUSIC menu and want to
return to the Folder list, use the v / V to highlight
and
press ENTER.
• Press DISC MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
• When playing a file containing information such as track
titles, you can see the information by pressing DISPLAY.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
MP3
WMA
Audio CD and MP3 / WMA Disc
Features
Random
1. Press RANDOM during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
CD
MP3
WMA
Pause
2. To return to normal playback, press RANDOM
repeatedly until RANDOM disappears from the
menu screen.
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY, ENTER or
press PAUSE/STEP again.
Tip:
By pressing > during random playback, the unit selects
another track and resumes random playback.
CD
MP3
WMA
Moving to another Track
1. Press . or > briefly during playback to go to
the next track or to return to the beginning of the
current track.
CD
Repeat A-B
1. To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and “A” appear on the menu screen.
2. Press . twice briefly to step back to the
previous track.
3. In case of audio CD, to go directly to any track,
enter the track number using the numbered but-
tons (0-9).
2. Press A-B again at your chosen end point. The
Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play
repeatedly.
CD
MP3
WMA
Repeat Track/All/Off
3. To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the menu screen.
You can play a track/all on a disc.
1. Press REPEAT when playing a disc. The repeat
icon appears.
CD
3D Surround
2. Press REPEAT to select a desired repeat mode.
To produce a 3D surround effect that simulates
multi-channel audio from two stereo speakers (instead
of the five+ speakers normally required for
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
multi-channel audio from a home theater system).
Note:
1. Press AUDIO during playback.
If you press > once during Repeat Track playback, the
“3D SUR.” appears on the menu screen.
repeat playback cancels.
2. To return to normal playback, press AUDIO
repeatedly until “3D SUR.” disappears from the
menu screen.
CD
MP3
WMA
Search
1. Press and hold . or > for about two seconds
during playback.
The player will now go into SEARCH mode.
2. Press and hold . or > repeatedly to select
the required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3. To exit SEARCH mode, press PLAY.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Programmed Tracks
Programmed Playback
1. Press REPEAT when playing a disc. The repeat
icon appears.
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program can contain 30 tracks.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
1. Insert a disc.
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
Note:
If you press > once during Repeat Track playback, the
2. Press PROGRAM.
repeat playback cancels.
E
The
mark will appear to the right of the word
“Program” on the right side of the menu screen.
Erasing a Track from Program List
Note:
E
Press PROGRAM again, then the
mark will
1. Video CD : Press PROGRAM in the stop mode to
enter Program Edit mode.
disappear to exit the Program Edit mode.
2. Press B to move to the “Program” list.
AUDIO CD
0:52:07
MUSIC
0:00:00
1
/
12
1
/
12
List
List
E
Program
Track5
E
Program
2-Music2
Track1
Track2
Track3
Track4
Track5
3. Use v/V to select the track that you wish to erase
Track7
Track4
Track1
4-Music4
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
6-Music6
1-Music1
from the “Program” list.
Track6
Track7
Track8
4. Press CLEAR. Repeat to erase additional tracks
on the list.
Clear All
Clear All
PROGRAM Edit
DISPLAY Info
PROGRAM Edit
Audio CD Menu
MP3/WMA Menu
Erasing the Complete Program List
1. Follow steps 1-2 of “Erasing a Track from Program
List” as above.
Video CD: Press PROGRAM while playback is
stopped. The program menu appears. Press
PROGRAM to exit the menu.
2. Use 3/4to select “Clear All”, then press ENTER.
The complete Program for the disc will be erased.
Note:
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the programmed playback
(See “PBC” on page 25).
Note:
The programs are also cleared when the disc is
removed.
VIDEO CD
List
Track1
E
Program
Track5
Track2
Track3
Track4
Track5
Track2
Track3
Track1
Clear All
Video CD Menu
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing on the
“Program” list.
5. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
6. To resume normal playback from programmed
playback, select a track of CD (or MP3/WMA) list
and then press PLAY.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
Viewing a JPEG Disc
Moving to another File
Press . or > once during viewing a picture to
advance to the next file or to the previous file.
Using this DVD/VCR Combi receiver you can view
Kodak PICTURE CDs and discs with JPEG files.
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
JPEG
Zoom
Use zoom to enlarge the photo image.
(see 34 page)
PHOTO
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
To rotate picture
>>>
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
To listen to MP3/WMA music watching picture
JPEG
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list, use the v / V buttons on the remote to
You can display files while listening to MP3/WMA
music files recorded on the same disc.
1. Insert the disc containing the two types of file in
the player.
highlight
and press ENTER.
2. Press TITLE to display PHOTO menu.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
3. Press v / V to select a photo file.
4. Use B / V to select
icon then press ENTER.
While viewing a file, you can press STOP to move
to the previous menu (PHOTO menu).
Press DISC MENU to move to the next page.
Playback starts. The playback will continue until
STOP is pressed.
Tip:
JPEG
Slide Show
To listen to only the desired music watching picture,
programmed the desired tracks from the “MUSIC”
menu and then proceed as above.
Use v V b B to highlight the
press ENTER.
(Slide Show) then
Tip:
JPEG disc compatibility with this player is
limited as follows:
• There are three Slide Speed options
(Normal) and > (Slow).
: >>> (Fast), >>
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
2048 pixels and burn another disc.
• On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
• Press RETURN, information of file is hidden.
JPEG
Still Picture
1. Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
• The total number of files and folders on the disc
should be less than 650.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
• Some discs may be incompatible due to a
different recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD player. Even though
the files are shown as JPEG image files in
Windows Explorer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Speaker Setup
This chapter includes important reference information
to help you set your DVD/VCR Combi receiver.
If you connected speakers to your DVD/VCR Combi
receiver, setting the Distance lets the speakers know
how far the sound has to travel to reach your set lis-
tening point. This allows the sound from each speaker
to reach the listener at the same time.
Press b / B to adjust the Distance of the selected
speaker.
Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
[0.3(1)m(ft) - 6.0(20)m(ft)]
1. Press SETUP. The setup menu appears.
Test
2. Use v / V to select the AUDIO option then press
B to move to the second level.
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals memo-
rized in the system.
Front Left (L) → Center → Front Right (R)
→ Rear Left (R) → Rear Right (L) → SubWoofer
3. Use v / V to select the Speaker Setup option then
press B to move to the third level. “Select” is high-
lighted.
4. Press ENTER and 5.1 Speaker Setup menu
appears.
AUDIO
Speaker
Size
Front L
Large
0
dB
Volume
Distance
Test
m(ft)
0.6(2)
Off
Select
Move
Return
Enter
5. Use b / B to select the desired speaker.
6. Adjust options using v / V / b / B buttons.
7. Press RETURN to return to the menu screen.
Speaker selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press b / B to adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Distance
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
Maintenance and Service
This unit will play DVD-R/RW discs recorded using
the DVD-Video format that have been finalized using
a DVD-recorder.
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
• This unit will play DVD-RW discs recorded using
the Video Recording (VR) format.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
1. Insert a disc and close the tray. The TITLE LIST
menu appears on the TV screen.
DVD-VR
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
2. Press v / V to select a track then press PLAY or
ENTER and playback starts.
3. Press TITLE to move to the list menu.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Note:
• Unfinalized DVD-R/RW discs cannot be played in this
player.
• Some DVD-VR disc are made with CPRM data by DVD
RECORDER. Player does not support these kinds of
discs.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
What is ‘CPRM’?
Maintaining the Unit
CPRM is a copy protection system (with scramble system)
only allowing the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This play is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can only be made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played on
The DVD/VCR Combi receiver is a high-tech,
precision device. If the optical pick-up lens and disc
drive parts are dirty or worn, the picture quality could
be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
players that are specifically compatible with CPRM.
For details, please contact your nearest authorized
service center.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DivX Movie Disc
DivX disc compatibility with this player is limited
as follows:
Using this DVD/VCR Combi receiver you can play
DivX disc.
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
• The file name of the DivX subtitle is available by
56 characters.
MOVIE
0:00:00
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
Movie Folder 8
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
v / V buttons on the remote to highlight
and
• If the file is recorded with GMC, the unit
supports only 1-point of the record level.
press ENTER.
GMC?
3. If you want to view a particular file, press
*
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
v / V to highlight a file and press ENTER or PLAY.
4. Press STOP to exit.
Tip:
• Press DISC MENU to move to the next page.
Playable DivX file
• On a CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
z ".avi ", ".mpg ", ".mpeg "
Playable Codec format
is highlighted.
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Features-VCR part
On Screen Display
Video Doctor (Self-Diagnosis)
You may easily display the current time or tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and opera-
tional mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking
place these On Screen Displays will not be recorded
onto the tape.
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error mes-
sages will appear on the TV screen.
1. Press i.
Press 1or 2to select Dr.
Press OK.
1. Press CLK/CNT to display.
VCR
VIDEO DOCTOR
Dr.
Press CLK/CNT repeatedly to cycle through the
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
VCR
VCR
1
2
Pr-12
P
TIME SYS-
SET
REC
R
ACMS
Dr.
Dr.
DATE
NIC
TEM
f
OSD
ON
OFF
16:9
4:3
OK
OK
i
OPR
i
2. After 3 seconds the majority of the On Screen
Displays will clear leaving only the clock or tape
counter and the amount of tape left on the screen.
Press CLK/CNT again to remove all displays from
the TV screen.
2. Press 3or 4to check a problem.
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in place
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the
display window instead of the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on the tape.
NO. OF TIMER PROGRAMME
O 2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00 SP
Shows the current status of timer recording.
1. Press CLK/CNT.
Press CLEAR to set the counter to 0:00:00.
Press PLAY or start recording.
The tape counter will display the actual play time
in hours, minutes and seconds.
3. Press i
2. Press STOP when playback or recording is
complete.
Press BACKWARD.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Hi-Fi Stereo Sound System
Wide Screen Compatibility 16:9
Your DVD/VCR Combi receiver will record and play-
back Hi-Fi stereo sound. In addition it has a stereo
NICAM digital stereo sound decoder. This allows you
to record and playback the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio system, video disc or another Hi-Fi VCR.
Your DVD/VCR Combi receiver can record and play
back wide screen aspect ratio programmes (16:9). To
record a wide screen format programme successfully
the correct type of wide screen signal must be broad-
cast by the TV station.
1. Switch on your VCR.
Press i.
Press F or G to select 16:9/4:3.
Press OK.
1. Your DVD/VCR Combi receiver’s NICAM digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual and mono sound. The particular type of
sound received or that recorded will be briefly dis-
played on the TV screen for a couple of seconds:
STEREO NICAM
VCR
VCR
1
2
1
2
Pr-12
Pr-12
P
P
TIME
SYS-
TEM
SET
SET
REC
ACMS
REC
ACMS
R
AUT
O
Dr.
R
Dr.
DATE
16:9
4:3
16:9
4:3
NIC
f
f
OSD
4:3
16:9
OSD
ON
16:9
ON
16:9
i
OK
i
OFF 4:3
OPR
OFF 4:3 OPR
2. Press D or E repeatedly to select: AUTO, 4:3 or
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
16:9.
AUTO:
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
4:3
Only for playing back and recording Normal format
recordings (4:3).
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
16:9:
Only for playing back and recording Wide-Screen
format recordings (16:9).
2. Press AUDIO repeatedly until the desired audio
mode appears.
3. The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary lan-
guage is output onthe left channel and the sec-
ondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
VCR
1
2
Pr-12
P
SET
REC
ACMS
Dr.
R
AUT
O
16:9
4:3
f
OSD
4:3
16:9
ON
16:9
i
OFF 4:3
OPR
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
3. Press i to remove the menus from the TV screen.
To enjoy Wide-Screen playback you must
connect your DVD/VCR Combi receiver to the TV
using a SCART cable.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Features
Last Scene Memory
DVD
CD
VCD
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Note:
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes.
Video Mode Setting
ꢀ With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
ꢀ To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
ꢀ Video mode sequence:
MODE1
MODE2
MODE3
MODE1
→
→
→
ꢀ If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed Description of each Video Mode
MODE1 : The source material of the DVD video (film materi-
al or video material) is determined from disc information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 : Suitable for playing video based content with
comparatively little motion.
Note:
The video mode setting only works when the
Progressive Scan mode is set to “On” on the setup
menu.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying from DVD To VCR
Recording from another video
recorder
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the COPY button.
With this video recorder you can make recordings
from an external source, such as copying from
another DVD/VCR Combi receiver or a camcorder.
Notes:
ꢀ Be sure to set “Progressive Scan” to “Off” on the
setup menu.
Note:
ꢀ If the DVD you are attempting to copy is copy
protected, you may not be able to copy the disc.
In the following description, this video recorder will be
one used for recording and will be referred to as
DVD/VCR Combi receiver B. The other appliance will
be used for playback and will be referred to as
DVD/VCR Combi receiver A.
1. Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2. Insert VHS Tape
1. DVD/VCR Combi receiver A should be connected
to the SCART socket on the rear panel of your
unit or the AV sockets on the front panel of your
unit.
Insert a blank VHS videotape into the VCR deck.
3. Copy the DVD to VHS Tape
Press the REC/ITR button.
2. Insert the recorded tape into DVD/CD/VCR
receiver A and a blank tape into DVD/VCR Combi
receiver B.
ꢀ The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
ꢀ If the DVD disc menu appears, you may need
to press the Play button manually to begin
copying.
3. Press AV until the socket you wish to record from
is displayed. (DVD/VCR Combi receiver B)
AV 1 for recording from EURO AV1 SCART socket
on the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) sockets on the front of your unit.
Note:
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
4. Stop the Copy Process
When the DVD is finished playing, press STOP to
end the copy.
4. To start recording, press the REC/ITR on
DVD/VCR Combi receiver B and PLAY on
DVD/VCR Combi receiver A.
ꢀ You must stop the Copy process manually
when the DVD movie ends, or the unit may
replay and record over and over again.
5. When you want to finish copying, press the STOP
on both DVD/VCR Combi receiver.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM. Before
tuning, make sure that you have turned down the vol-
ume.
Preset radio stations in the DVD/VCR Combi receiver
memory first (see “Presetting radio stations” on the
left).
1. Press FM/AM on the remote control or on the
front panel until the frequency band appears
on the display and TV screen.
1. Press FM/AM on the remote control or on the
front panel until the frequency band appears
on the display and TV screen.
The last received station is tuned in.
2. Press 3/4on the remote control repeatedly to
select the preset station you want.
Each time you press the button, the DVD/VCR Combi
receiver tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on
the remote control repeatedly.
RADIO 01
AM 522kHZ
, OK, CLEAR
2. Press 3/4on the remote control to select your
desired radio channel.
To Clear the Stored Radio
Stations
1. Press FM/AM on the remote control or on the
front panel until the frequency band appears
on the display and TV screen.
RADIO 06
FM 108. 00MHZ
, OK, CLEAR
3. Press FM/AM on the remote control or on the
front panel to select the desired band.
4. Hold down + PRESET - n the front panel or
hold down 1 and 2 on the remote control for 1
or 2 seconds, and a station is searched for
automatically.
RADIO 06
FM 108. 00MHZ
, OK, CLEAR
2. Press 3/4on the remote control to select your
desired station.
RADIO 06
FM 87. 50MHZ
, OK, CLEAR
RADIO 10
AM 522kHZ
, OK, CLEAR
5. Press MEMORY on the remote control.
3. Press CLEAR the remote control to clear the
stored radio station.
6. Repeat steps 2 to 5 to store other stations.
RADIO 10
FM 98. 00MHZ
, OK, CLEAR
Note
ꢀ While record or record pause mode, the CLEAR
function may not be operated.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning into a Station Manually
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information,
a description of station programme type text message
about the station or specifics of musical selection and
the correct time.
1. Press FM/AM on the remote control or on the
front panel until the frequency band appears
on the display and TV screen.
2. Press FM/AM on the remote control or on the
front panel to select the desired band.
3. Press + PRESET - on the front panel or hold
down 1 and 2 on the remote control to tune
in the desired station.
RDS Tuning
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s
call sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services
programme (PS) if transmitted by the station.
Tuning into a Station Automatically
Hold down + PRESET - on the front panel or hold
down 1 and 2 on the remote control for 1 or 2
seconds, and a station is searched for
automatically.
RDS Display
Note
ꢀ The search may not stop at a station with a very
weak signal.
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
that appears when a station is first tuned. In normal
RDS operation the display will indicate the station
name. Pressing RDS on the remote control enables
you to show the station name.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, MUTING and MUTE indicator
appear in the display.
Note
ꢀ If the RDS services programme (PS) is not being
transmitted, the Display Window will show a PS
NONE message.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Country Codes
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Code
AF
AR
AU
AT
Country
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Code
ET
FJ
Country
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Code
MY
MV
MX
MC
MN
MA
NP
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
NL
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
KE
KW
LY
Kuwait
Libya
Luxembourg
PT
RO
El Salvador
LU
Zimbabwe
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The power is on, but
the DVD/VCR Combi
receiver does not work.
ꢀ The TV is not set to receive DVD/VCR
Combi receiver signal output.
ꢀ Select the appropriate video input mode
on the TV so the picture from the
DVD/VCR Combi receiver appears on
the TV screen.
No picture.
ꢀ TV/VCR mode for DVD/VCR Combi
receiver is set to TV.
ꢀ Press the TV/VCR button on the remote
control repeatedly to choose VCR mode.
TV indicator disappears in the display
window.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
ꢀ The equipment connected with the audio ꢀ Select the correct input mode on the audio
No sound.
cable is not set to receive DVD/VCR
Combi receiver signal output.
receiver so you can listen to the sound from
the DVD/VCR Combi receiver.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cables securely.
ꢀ The power of the equipment connected ꢀ Turn on the equipment connected with
with the audio cables is turned off.
the audio cables.
ꢀ The digital audio output is set to the
wrong position.
ꢀ Set the digital audio output to the
correct position, then turn on the
DVD/VCR Combi receiver again by
pressing POWER.
ꢀ Clean the disc.
ꢀ The disc is dirty.
The playback picture is
poor.
ꢀ Clean video heads.
ꢀ Tape heads are dirty.
ꢀ Use (v/V) for manual tracking
adjustment while tape is playing.
ꢀ Tape is a rental or was recorded on
another DVD/VCR Combi receiver.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
ꢀ No disc is inserted.
ꢀ No tape is inserted.
The DVD/VCR Combi
receiver does not start
playback.
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional code.)
ꢀ An unplayable disc is inserted.
ꢀ
Place the disc with the playback side down.
ꢀ The disc is placed upside down.
ꢀ Place the disc on the disc tray correctly
inside the guide.
ꢀ The disc is not placed within the guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change the
rating level.
ꢀ The Rating level is set.
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your DVD/VCR Combi receiver the video head is auto-
matically cleaned. This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become
blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old
or damaged tapes might.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
Correction
Symptom
ꢀ The remote control is not pointed at the
remote sensor of the DVD/VCR Combi receiver.
ꢀ Point the remote control at the remote
sensor of the DVD/VCR Combi receiver.
ꢀ This remote control
uses the same
buttons for VCR and
DVD functions
(ex. PLAY).
ꢀ The remote control is too far from the
DVD/VCR Combi receiver.
ꢀ Operate the remote control within 23 ft
(7 m).
ꢀ There is an obstacle in the path of the remote
ꢀ Remove the obstacle.
control and the DVD/VCR Combi receiver.
ꢀ The batteries in the remote control are
ꢀ Replace the batteries with new ones.
exhausted.
ꢀ This remote control uses the same
buttons for VCR and DVD functions
(ex. PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the CD/DVD button.
The tape does not run
during recording.
ꢀ The DVD/VCR Combi receiver is in the
RECORD PAUSE MODE.
ꢀ Press PAUSE/STEP (X) to resume
recording.
The tape will not rewind
or fast-forward.
ꢀ The tape is already fully rewound or fast-
forwarded.
ꢀ Check the tape.
The playback picture
does not appear while
the tape is running.
ꢀ If you’re using only the RF cable for con-
nection.
ꢀ Set the TV to the Video channel
(see p. 17).
Noise appears during
visual search.
ꢀ This is normal.
ꢀ Turn camcorder on and operate
properly.
Noise appears during
normal playback.
ꢀ The automatic tracking mode is engaged. ꢀ Try manual tracking (see p. 27).
ꢀ The automatic tracking mode is engaged.
Breaks are noticeable
in Hi-Fi soundtrack.
ꢀ There is no tape loaded, or the tape loaded ꢀ Try manual tracking (see p. 27).
has had its record safety tab removed.
Recording cannot be
started.
ꢀ The source (another VCR, camcorder) has ꢀ Insert a tape, or using adhesive tape,
not been properly connected.
cover the hole where the tab was
removed.
Tape-to-tape editing is
not possible.
ꢀ The clock/or the timer have been set
incorrectly.
ꢀ Confirm that the camcorder is properly
connected.
Timer recording won’t
work.
ꢀ Re-perform the clock and/or timer set-
tings.
ꢀ The timer is not engaged.
ꢀ Press POWER and confirm that the
timer indicator is displayed on the
DVD/VCR Combi receiver’s Display.
ꢀ The loaded tape has had its record safety
tab removed.
ꢀ Insert a pate with adhesive tape, or
insert a tape with the record safety tab
intact.
ꢀ Audio mode is not set properly.
ꢀ Select “STEREO” by repeatedly press-
ing AUDIO on the remote control.
No Hi-Fi sound.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
• When the DVD/VCR Combi receiver is moved from
a cold place to a warm place.
•
Keep the DVD/VCR Combi receiver plugged into an AC
power outlet with POWER On. This will help prevent conden-
sation.
• Under extremely humid conditions.
• When condensation has occurred, wait a few hours
for the DVD/VCR Combi receiver to dry before using
it.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Refer to main label
Refer to main label
430 X 81 X 360 mm (w x h x d)
5.8 kg (17.6 lbs)
Operating temperature
Timer
Operating humidity
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
5 % to 90 %
DVD Section
Laser
Signal system
Frequency response
Semiconductor laser, wavelength 650 nm
PAL/NTSC
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 20 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Outputs
More than 65 dB (analog out connectors only)
Less than 1.0%
More than 60 dB (DVD, CD)
S-VIDEO OUT
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 ohms
VCR Section
Head system
Television system
Recording format
RF OUT
6 heads helical scan azimuth system
PAL/SECAM colour system
PAL/MESECAM
K
RF-Modulator
Tape speed
UHF 22-68 (adjustable)
PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
NTSC (Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP),
11.12 mm/s (EP)
Maximum recording time
Rewind time
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
Input level
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
VIDEO: More than 43 dB
Output level
Signal-to-noise ratio
AUDIO: More than 72 dB (Hi-Fi)
More than 42 dB (Mono)
Dynamic range
AUDIO: More than 85 dB
Tuner Section
Tuning range
FM: 87.5 - 108.0 MHz
AM: 522 - 1611 kHz
FM: 10.7 MHz
Intermediate frequency
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
25W + 25W (6 ohm at 1 kHz, THD 10%)
Front: 25W + 25W (THD 10%)
Centre: 25W
Surround: 25W + 25W (6 ohm at 1 kHz, THD 10%)
Subwoofer: 60W (8 ohm at 30 Hz, THD 10%)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
eaker Section
Satellite (LHS-CX245T)
Type
Impedance
1 Way 1 Speaker
6 Ω
Frequency Response
Sound Pressure Level
Rated Input Power
Max Input Power
Net Dimensions (W x H x D)
Net Weight
130 - 20,000 Hz
85 dB/W (1m)
25W
50W
90 x 138.5 x 100 mm
0.89 kg
Passive Subwoofer (LHS-CX245W)
Type
Impedance
1 Way 1 Speaker
8 Ω
Frequency Response
Sound Pressure Level
Rated Input Power
Max Input Power
50 - 1,500 Hz
82 dB/W (1m)
60W
120W
Net Dimensions (W x H x D)
Net Weight
160 x 350 x 345 mm
4.5 kg
Accessories:
AM/FM antenna, Speaker cable x 5, Scart cable x 1, Remote control x 1, Batteries (AAA) x 2
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
P/N: 3835RH0049K
Download from Www.Somanuals.com. All Manuals Search And Download.
|