LG Electronics DVD Recorder LHT799 User Manual

HT792TN-R1.JA1ULLK_ENG_MFL34656568  
DVD RECEIVER  
OWNER’S MANUAL  
MODEL: LHT799  
Main Unit - LHT799  
Speakers - SH72TN-F  
SH72TN-C  
SH72TN-S  
SH72TN-W  
R
Before connecting, operating or adjusting this product, please  
read this instruction booklet carefully and completely.  
For service/  
support Call:  
Toll Free Number  
1-800-243-0000  
© Copyright 2007, LG Electronics U.S.A., Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNERS  
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE  
REFERENCE.  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric  
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following  
procedures for installation, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and  
operating instructions should be read before the  
product is operated.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
2. Keep these instructions. - The safety, operating and  
use instructions should be retained for future  
reference.  
11. Only use attachments/accessories specified by  
the manufacturer.  
3. Heed all warnings. - All warnings on the product and  
in the operating instructions should be adhered to.  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to  
avoid injury from tip-over.  
4. Follow all instructions. - All operating and use  
instructions should be followed.  
5. Do not use this apparatus near water. – For  
example: near a bath tub, wash bowl, kitchen sink,  
laundry tub, in a wet basement; or near a swimming  
pool; and other areas located near water.  
6. Clean only with dry cloth. – Unplug this product  
from the wall outlet before cleaning. Do not use liquid  
cleaners.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions. -  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over-heating. The  
openings should never be blocked by placing the  
product on a bed, sofa, rug or other similar surface.  
This product should not be placed in a built-in  
installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
13. Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the polarized  
or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding  
type plug has two blades and a third grounding  
prong. The wide blade or the third prong are  
provided for your safety. If the provided plug does  
not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Maintenance and Service  
Maintenance and Service . . . . . . . . . . . . . . . . .4  
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Front Panel/Rear Panel . . . . . . . . . . . . . . . . . . .6  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .7  
Refer to the information in this chapter before  
contacting a service technician.  
Handling the unit  
Installation and Setup  
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Optional Equipment Connection . . . . . . . . . . . .9  
USB connection . . . . . . . . . . . . . . . . . . . . . . .9  
AUX IN connection . . . . . . . . . . . . . . . . . . . . .9  
OPTICAL IN connection . . . . . . . . . . . . . . . . .9  
AUDIO IN connection . . . . . . . . . . . . . . . . . . .9  
iPod connection . . . . . . . . . . . . . . . . . . . . . . . .9  
Antenna Connection . . . . . . . . . . . . . . . . . . . .10  
Speaker System Connection . . . . . . . . . . . . . .10  
HDMI Connection . . . . . . . . . . . . . . . . . . . . . .11  
Displaying Disc Information on-screen . . . . . .12  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .12  
General Operation . . . . . . . . . . . . . . . . . . . .12-14  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .12  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .13  
LOCK (Parental Control) . . . . . . . . . . . . . . . .14  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide spray  
near the unit.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
Operation  
General features . . . . . . . . . . . . . . . . . . . . . . .15  
Additional features . . . . . . . . . . . . . . . . . . . . .16  
Playing an Audio CD or MP3/WMA file . . . . . .17  
Programmed Playback . . . . . . . . . . . . . . . . . .17  
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .18  
Playing a DivX Movie file . . . . . . . . . . . . . . . .19  
Using iPod . . . . . . . . . . . . . . . . . . . . . . . . .20-21  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .22  
Presetting the Radio Stations . . . . . . . . . . . . .23  
Listening to the Radio . . . . . . . . . . . . . . . . . . .23  
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .24  
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Selecting input source . . . . . . . . . . . . . . . . . . .24  
XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .24  
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
XM Satellite Radio Operation . . . . . . . . . . .25-26  
Controlling your TV with the Suppllied  
Maintaining the Unit  
The DVD/CD Receiver is a high-tech, precision  
device. If the optical pick-up lens and disc drive parts  
are dirty or worn, the picture quality could be  
diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
What is SIMPLINK?  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .27  
Controlling other TVs with the Supplied  
Remote Control . . . . . . . . . . . . . . . . . . . . . .27-28  
Some functions of this unit are controlled by TV’s  
remote control when this unit and LG TV with  
SIMPLINK are connected through HDMI  
connection.  
Reference  
Controllable functions by LG TV’s remote control;  
Play, Pause, Scan, Skip, Stop, Power Off, etc.  
Refer to the TV owner’s manual for the details of  
SIMPLINK function.  
LG TV with SIMPLINK function has the logo as  
shown above.  
Language Codes . . . . . . . . . . . . . . . . . . . . . . .29  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Troubleshooting . . . . . . . . . . . . . . . . . . . . .30-31  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .32  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Types of Playable Discs  
Before use  
DVD  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain it for future  
reference.  
(8 cm / 12 cm disc)  
Audio CD  
(8 cm / 12 cm disc)  
This manual provides information on the operation  
and maintenance of your DVD/CD Receiver. Should  
the unit require service, contact an authorized service  
location.  
In addition, this unit can play a DVD R, DVD RW,  
and CD-R or CD-RW that contains audio titles, MP3,  
WMA, JPEG or DivX files.  
Notes:  
About the  
Symbol Display  
Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD-RW,  
” may appear on your TV display during  
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,  
DVD+RW) discs may not be played on the unit.  
Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal). It may result in malfunctions.  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
Symbol Used in this Manual  
Note:  
Indicates special notes and operating features.  
Regional Code  
This unit has a regional code printed on the rear of the  
unit. This unit can play only DVD discs labelled as the  
same as the rear of the unit or “ALL”.  
Tip:  
Indicates tips and hints for making the task easier.  
Notes on Regional Codes  
A section whose title has one of the following symbols  
is applicable only to the disc represented by the  
symbol.  
Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your DVD player’s regional  
code or the disc cannot play.  
DVD  
DVD  
ACD  
MP3  
If you try to play a DVD with a different regional  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
Audio CDs  
MP3 files  
WMA files  
JPEG files  
DivX files  
WMA  
JPEG  
DivX  
Remote Control Operation Range  
Point the Remote Control at the Remote Sensor and press  
the buttons.  
Distance: About 23 ft (7 m) from the front of the Remote  
Sensor  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic”, and the double-D symbol are  
trademarks of Dolby Laboratories. Confidential Unpublished  
works. Copyright 1992-1997 Dolby Laboratories. All rights  
reserved.  
Angle: About 30° in each direction in front of the Remote  
Sensor  
Remote Control battery installation  
Manufactured under license from Digital Theater Systems,  
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;  
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-  
wide patents issued and pending. "DTS" and "DTS Digital  
Surround” are registered trademarks of Digital Theater  
Systems, Inc. Copyright 1996, 2003 Digital Theater  
Systems, Inc. All Rights Reserved.  
Remove the battery cover on the rear of  
the Remote Control, and insert two R06  
(size AA) batteries with  
aligned correctly.  
and  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel/Rear Panel  
POWER  
DISC Tray  
DISPLAY Window  
VOLUME controller  
TUNING(-/+)/SKIP/  
SEARCH(./>)  
STOP (x)  
Remote Sensor  
AUDIO IN connector  
PAUSE ( )/  
X
MONO/STEREO (ST.)  
USB port  
Connect to a USB port of a memory  
device (USB memory etc.)  
FUNC.(-)/PLAY(B)  
Press and hold down this button  
about 3 seconds, then press  
repeatedly to select other function.  
OPEN/CLOSE button  
Power Cord  
SPEAKER connectors  
FM Antenna connector  
AUX AUDIO Input  
(L/R) connector  
Cooling fan  
INPUT  
AUX  
MONITOR  
L
-
-
R
HDMI OUT  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
OUT PUT  
OPTICAL IN connector  
AM Loop Antenna connectors  
MONITOR OUT connector  
COMPONENT VIDEO OUT terminals  
Connect to a TV with Y PB PR inputs.  
XM IN Connector  
Connect an XM Passport System  
to this terminal. (sold separately.)  
TRANSMITTER (DC 7V OUT)  
Connect a wireless transmitter.  
iPod Connector  
Connect a dock connector of iPod. (Sold separately.)  
HDMI OUT  
HDMI output providing a high quality interface for digital audio and video.  
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause  
permanent damage to the unit.  
Wireless transmitter receiver kit not supplied. We urge you to purchase such a kit to avoid  
cumbersome wires running front to back on the floor.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
OPEN/CLOSE (Z)  
Opens and closes the disc tray.  
DVD  
POWER  
TUNER  
Selects the System’s tuner (FM ,AM and  
XM bands).  
TUNER  
AUX  
OPEN/CLOSE  
DVD  
Selects the output source (CD/DVD).  
POWER  
DIMMER  
iPod  
AUX  
Selects the iPod source.  
Selects input source.  
S-TITLE  
Selects a subtitle language (DVD).  
USB  
iPod  
USB  
AUDIO  
SOUND  
S-TITLE  
CLEAR  
Plays the multimedia files.  
CLEAR  
Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
DIMMER  
Changes brightness of the display  
window on the front panel during in  
power-on status.  
REPEAT  
REPEAT A-B  
MARKER  
SEARCH  
SCAN  
TITLE  
SKIP  
+
SCAN +  
MARKER  
Marks a point during playback.  
AUDIO  
Selects an audio language (DVD) or an  
audio channel (CD).  
STOP  
PLAY  
PAUSE/STEP  
SEARCH  
Displays MARKER SEARCH menu.  
SCAN/SLOW(bb/BB)  
Searches backward or forward.  
Reverse/Forward slow playback.  
ZOOM  
DISPLAY  
SOUND  
Selects the sound mode.  
SETUP  
MENU  
XM CH  
RETURN  
REPEAT  
Repeats chapter, track, title, all  
SKIP (./>)  
Moves to the previous or next  
chapter or track.  
TITLE  
Displays the disc’s Title menu, if  
available.  
REPEAT A-B  
Repeats sequence.  
XM CH  
ENTER  
MENU  
Accesses the menu on a DVD disc.  
ZOOM  
Enlargres video image.  
STOP (x), PLAY (B)  
PAUSE/STEP (X)  
VSM  
XTS pro  
Supplies more natural and realistic  
sound.  
SLEEP  
MUTE  
VOL  
SETUP  
Accesses or removes setup menu.  
DISPLAY  
Accesses On-Screen display.  
Supplies great sound effect.  
RETURN  
Removes the menu.  
SLEEP  
Sets the System to turn off  
automatically at a specified time.  
b/B/v/V (left/right/up/down)  
Selects an option in the menu.  
CAT/HDMI  
XM MODE/RESOL.  
PROG./MEMO.  
MUTE  
ENTER  
Turns the sound on and off  
temporarily.  
VOLUME (-/+)  
Acknowledges the menu selection.  
PRESET (-/+)  
Selects programme of Radio.  
Adjusts speaker volume.  
XM CH (-/+)  
Tunes in the desired XM station.  
POWER  
INPUT  
XM MODE  
Selects a XM display mode.  
CHANNEL  
VOL  
TUN. (-/+)  
Tunes in the desired radio station.  
RESOL.  
Changes the resolution depending on  
your TV.  
0-9 numerical buttons  
Selects a service, program number  
directly or selects numbered options in  
a menu.  
PROG./MEMO.  
Accesses or removes Program menu.  
Enter a radio station’s frequency into  
the tuner.  
CAT  
Selects the Category Search.  
HDMI  
TV Control Buttons  
- POWER: Switches TV ON and  
OFF.  
Switches the HDMI mode to HDMI  
(active) and OFF (inactive).  
- CHANNEL v/V: Selects TV’s  
channel.  
- VOLUME +/–: Adjusts TV’s  
volume.  
- INPUT: Selects the TV’s source.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
TV Connection  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
Video connection  
Connect the MONITOR OUT jack from the DVD/CD  
Receiver to the VIDEO IN jack on the TV using the  
video cable (V).  
Tips:  
Depending on your TV and other equipment you  
wish to connect, there are various ways you could  
connect the DVD/CD Receiver. Use one of the  
connections described below.  
Component Video connection  
Connect the COMPONENT VIDEO OUT jacks from  
the DVD/CD Receiver to the corresponding jacks on  
the TV using a Y PB PR cable (C).  
Please refer to the manuals of your TV, VCR,  
Stereo System or other devices as necessary to  
make the best connections.  
If your television is a high-definition or “digital  
ready” television, you may take advantage of the  
DVD/CD Receiver’s progressive scan output for the  
highest video resolution.  
If your TV does not accept your resolution setting,  
abnormal picture appears on the screen. Please  
read owner’s manual for TV then set the resolution  
that your TV can accept.  
Caution:  
Make sure the DVD/CD Receiver is connected  
directly to the TV. Select the correct AV input on  
your TV.  
Do not connect your DVD/CD Receiver to the TV  
via your VCR. The DVD image could be distorted  
by the copy protection system.  
Note:  
Rear of DVD/CD Receiver  
The HDMI mode must be set to OFF for VIDEO OUT  
and Component video connections.  
INPUT  
AUX  
MONITOR  
L
-
-
R
HDMI OUT  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
OUT PUT  
V
C
VIO  
INPUT  
OMPONT VIDE
PRGRESSIVE SCAN IPUT  
Y
L
Rear of TV  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Equipment Connection  
OPTICAL IN connection (O)  
Auxiliary device  
DVD Player  
Connect an optical output of DVD Player (or Digital  
Device etc) to the OPTICAL IN connector.  
(or Digital  
OUT  
IN  
Device, etc)  
VIDEO  
AUDIO (L)  
AUDIO IN connection (D)  
AUDIO (R)  
U
OPTICAL  
OUT  
Connect a output of portable device (MP3 or PMP etc)  
to the AUDIO input connector.  
To AUDIO OUT (L/R)  
USB Memory, MP3 Player (or  
Memory Card Reader, etc.)  
A
To AV IN AUDIO (L/R)  
O
INPUT  
AUX  
MONITOR  
L
-
-
R
HDMI OUT  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
OUT PUT  
To AUDIO IN  
Rear of DVD/CD Receiver  
USB connection (U)  
D
Connect the USB port of USB Memory (or MP3  
player, etc.) to the USB port on the front of the unit.  
To AUDIO OUT  
Portable device  
Removing the USB Device from the unit  
1. Choose a different function mode or press STOP  
(x) twice in a row.  
iPod connection  
Connect the iPod connector on the rear of the DVD/  
CD Receiver to the dock connector of iPod using an  
iPod cable (I).  
2. Remove the USB device from the unit.  
Notes:  
Don’t extract the USB device while operating.  
Music files (MP3/WMA), image files (JPEG) and  
video files can be played.  
Rear of DVD/CD Receiver  
This unit cannot use a USB HUB.  
Recommended Memory Cards.  
Compact Flash Card (CFC), Micro Drive (MD), Smart  
INPUT  
MONITOR  
L
-
AUX  
-
R
HDMI OUT  
Media Card (SMC), Memory Stick (MS), Secure Digital  
Card (SD), Multimedia Card (MMC), Memory Stick Pro  
(MS-Pro)  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
OUT PUT  
- Compatible with: FAT16, FAT32  
- Only use the memory cards recommended.  
Devices which require additional program  
installation when you have connected the unit to a  
computer are not supported.  
In case of a USB HDD, make sure to connect an  
auxiliary power cord to the USB HDD for proper  
operation. Up to four primary partitions of a drive are  
supported. If there is an extension partition, it will not  
be supported.  
If the drive of USB device is two or more, a drive  
folder is displayed on the screen. If you want to  
move to the initial menu after you select a folder,  
press RETURN.  
Digital cameras and mobile phones are not  
supported.  
I
iPod  
MENU  
Notes:  
Depending on the type of iPod, you may need to  
insert one of the dock adapters into the dock slot  
before you station your iPod.  
Adjust the volume to a moderate level before you  
connect your iPod and this unit.  
AUX IN connection (A)  
Connect a Output of auxiliary device to the AUX  
AUDIO Input (L/R) Connector.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna Connection  
Connect the supplied FM/AM antenna for listening to  
the radio.  
Speaker System Connection  
Connect the speakers using the supplied speaker  
wires.  
To obtain the best possible surround sound, adjust the  
speaker parameters (volume, distance, etc.).  
Connect the AM Loop antenna to the AM antenna  
connector.  
Connect the FM Wire antenna to the FM antenna  
connector.  
Front speaker  
(Right)  
Front speaker  
(Left)  
Notes:  
To prevent noise pickup, keep the AM Loop antenna away  
from the DVD/CD Receiver and other components.  
Be sure to fully extend the FM wire antenna.  
After connecting the FM Wire antenna, keep it as  
Center speaker  
horizontal as possible.  
AM Loop Antenna  
(supplied)  
FM Wire Antenna  
(supplied)  
INPUT  
AUX  
MONITOR  
L
-
-
R
Rear speaker  
(Right surround)  
Rear speaker  
(Left surround)  
HDMI OUT  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
OUT PUT  
Subwoofer  
Notes:  
Be sure to match the speaker wire to the  
appropriate terminal on the components: + to + and  
– to –. If the cables are reversed, the sound will be  
distorted and will lack bass.  
If you use front speakers with low maximum input  
rating, adjust the volume carefully to avoid  
excessive output on the speakers.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear of DVD/CD Receiver  
HDMI Connection  
About HDMI  
INPUT  
AUX  
MONITOR  
L
-
-
R
HDMI (High Definition Multimedia Interface) supports  
both video and audio on a single digital connection for an  
easy all- digital output to an HDMI or DI-equipped TV.  
HDMI OUT  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
Connection to an HDMI TV requires an HDMI cable  
while connection to a DVI-equipped TV requires a DVI  
adapter besides a HDMI cable.  
H
(Not supplied)  
HDMI has the capability to support standard,  
enhanced, or high-definition video plus standard to  
multi-channel surround-sound audio, HDMI features  
include uncompressed digital video, a bandwidth of up  
to 5 gigabytes per second, one connector (instead of  
several cables and connector), and communication  
between the AV source and AV devices such as DTVs.  
HDMI  
HDMI compatible TV  
Resolution setting  
You can change the resolution for the COMPONENT  
VIDEO OUT by pressing RESOL. on the Remote  
Control. Available resolution settings are as shown  
below.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI licensing LLC.  
OUTPUT  
Available Resolution  
If you have a HDMI TV or monitor, you can connect  
it to this DVD/CD Receiver using a HDMI cable.  
CONNECTION  
HDMI  
VIDEO OUT  
920 x 1080i  
1280 x 720p  
720 x 480p  
1920 x 1080i  
1280 x 720p  
720 x 480p  
720 x 480i  
1. Connect the HDMI OUT jack on the DVD/CD  
Receiver to the HDMI jack on a HDMI compatible  
TV or monitor (H).  
COMPONENT  
VIDEO OUT  
2. Set the TV’s source to HDMI (refer to owner’s  
manual for TV).  
3. In the stop mode, select HDMI mode by pressing  
HDMI. Press RESOL. repeatedly to select the  
resolution you wish to change.  
MONITOR OUT  
720 x 480i  
Notes:  
Notes:  
If the picture does not appear on the screen with  
the analog video connections, change the  
resolution to 480i.  
The arrow on the cable connector body should face  
up for correct alignment with the connector on the  
DVD/CD Receiver.  
For 720p and 1080i resolution on the component  
video out, only non-copy protected discs can be  
played back. If the disc is copy protected, it will be  
displayed at the 480p resolution.  
If HDMI cable is not connected, the HDMI button  
does not operate.  
If there is noise or there are lines  
on the screen, please check  
the HDMI cable.  
1080i, 720p, and 480p does not work with the  
analog video connections (MONITOR OUT).  
Not all HDCP-compatible  
DVI devices will work with  
this DVD/CD Receiver.  
If TV does not support HDCP, snow noise appears  
on the screen, or picture may be vibrated.  
The component (Y/PB/PR) will output to black  
picture in the RGB mode.  
If you change the resolution, the display MENU  
(MP3/JPEG/DivX) size is changed.  
Tip :  
If your TV does not accept your resolution setting,  
abnormal picture appears on the screen.  
Please read owner’s manual for TV, and then set  
the resolution that your TV can accept.  
When you use HDMI connection, you can change the  
resolution (480p, 720p, 1080i) for the HDMI output by  
pressing RESOL. on the Remote Control.  
Important Note  
Caution:  
If you turn off the TV or disconnect the HDMI cable  
during playback of the device, playback will pause.  
You have to click on the play button to play back  
again.  
Changing the resolution when the DVD/CD Receiver  
is connected with HDMI connector may result in  
malfunctions. To solve the problem, turn off the  
DVD/CD Receiver and then turn it on again.  
For some TVs, when you change the TV mode, such  
condition specified above may happen.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE  
Displaying Disc Information  
On - screen  
You can display various information about the disc  
loaded on-screen.  
1. Press DISPLAY to show various playback  
information.  
The displayed items differ depending on the disc  
type or playing status.  
2. You can select an item by pressing v / V and  
OSD  
change or select the setting by pressing b / B.  
Select a language for the Setup menu and then on-  
screen display.  
Title (Track) – Current title (or track) number/  
total number of titles (or tracks).  
Chapter – Current chapter number/total number  
of chapters.  
Disc Audio / Subtitle / Menu  
Time – Elapsed playing time.  
Audio – Selected audio language or channel.  
Subtitle – Selected subtitle.  
Angle – Selected angle/total number of angles.  
Sound – Selected sound mode.  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
Original – Refers to the original language in which  
the disc was recorded.  
Other To select another language, press  
numeric buttons and then ENTER to enter the  
corresponding 4-digit number according to the  
language code list on the page 29. If you enter the  
wrong language code, press CLEAR.  
Note:  
If any button is not pressed for a few seconds, the on-  
screen display disappears.  
Initial Settings  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound. You  
can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see the pages 12 to 14.  
DISPLAY  
To display and exit the Menu:  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
To go to the next level:  
Press B on the Remote Control.  
To go back to the previous level:  
Press b on the Remote Control.  
TV Aspect  
4:3 – Select when a standard 4:3 TV is connected.  
16:9 – Select when a 16:9 wide TV is connected.  
GENERAL OPERATION  
1. Press SETUP. The Setup menu appears.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
Display Mode  
The display Mode setting works only when the TV  
Aspect mode is set to “4:3”.  
3. Use v / V to select the second desired option and  
Letterbox – Displays a wide picture with bands on  
the upper and lower portions of the screen.  
then press B to move to the third level.  
4. Use v / V to select the desired setting then press  
ENTER to confirm your selection. Some items  
require additional steps.  
Panscan – Automatically displays the wide picture  
on the entire screen and cuts off the portions that  
do not fit.  
5. Press SETUP or PLAY to exit the Setup menu.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO  
5.1 Speaker Setup  
Make the following settings for the built-in 5.1 channel  
surround decoder.  
Each DVD disc has a variety of audio output options.  
Set the receiver’s AUDIO options according to the  
type of audio system you use.  
1. Press ENTER, and the 5.1 Speaker Setup menu  
appears.  
2. Use b / B to select the desired speaker.  
Dynamic Range Control (DRC)  
3. Adjust options using v / V / b / B buttons.  
With the DVD*1 format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation, thanks to digital audio technology.  
However, you may wish to compress the dynamic  
range of the audio output (the difference between the  
loudest sounds and the quietest ones). Then, you may  
listen to a movie at a lower volume without losing  
clarity of sound. Set DRC to On for this effect.  
*1:Dolby Digital only  
4. Press ENTER to confirm your selection. Returns to  
the previous menu.  
Speaker selection  
Select a speaker that you want to adjust. [Front  
speaker (Front L), Front speaker (Front R), Center  
Speaker (Center), Subwoofer (SubWoofer), Rear  
speaker (Rear L), Rear speaker (Rear R)]  
Note:  
Vocal  
Certain speaker settings are prohibited by the Dolby  
Digital licensing agreement.  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
Size  
Since the speaker settings are fixed, you cannot  
change the settings.  
HD AV Sync  
When using Digital TV.  
Volume  
Sometimes AV signal could not be transmitted  
simultaneously because of later transmission of video  
signal compared to audio signal.  
Press b / B to adjust the output level of the selected  
speaker. (-5dB ~ 5dB)  
Because it takes some time to convert analog video  
signal to digital one in the Digital TV.  
And It means that you may not enjoy picture on the  
screen and sound from speaker at the same time  
even though it is one scene.  
Distance  
If you connected speakers to your DVD/CD Receiver,  
setting the Distance lets the speakers know how far  
the sound has to travel to reach your set listening  
point. This allows the sound from each speaker to  
reach the listener at the same time.  
In the HD AV Sync menu, you could adjust delay time  
to audio signal for simultaneous AV signal  
transmission  
Press b / B to adjust the Distance of the selected  
speaker. (You can’t adjust front / Woofer speakers)  
Delay time could be set up with 10msec unit.  
(0 ~ 300ms)  
Test  
Press b / B to test the signals of each speaker. Adjust  
the volume to match the volume of test signals  
memorized in the system.  
Front Left (Front L) Center Front Right (Front R)  
Rear Right (Rear R) Rear Left (Rear L) →  
SubWoofer  
Delay time is different according to each TV Brand.  
So you need to adjust optimal delay time complying  
with your TV.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCK (Parental Control)  
OTHERS  
US  
Rating  
DivX(R) Registration  
We provide you the DivX® VOD (Video On Demand)  
registration code that allows you to rent and purchase  
videos based on the DivX® VOD service. For more  
1. Select “DivX(R) Registration” option and then  
press B.  
Blocks playback of rated DVDs based on their  
contents. Not all discs are rated.  
1. Select “Rating” on the LOCK menu then press B.  
2. To access the LOCK options, you must input the  
password you have created. If you have not yet  
entered password, you are prompted to do so.  
Input a password and press ENTER. Enter it again  
and press ENTER to verify. If you make a mistake  
before pressing ENTER, press CLEAR.  
2. Press ENTER while “Select” is selected and the  
registration code will appear.  
Use the registration code to purchase or rent the  
videos from DivX® VOD service at  
download the video onto a disc for playback on  
this unit.  
3. Select a rating from 1 to 8 using the v / V buttons.  
Rating 1-8: Rating one (1) has the most restrictions  
and rating eight (8) is the least restrictive.  
Unlock: If you select unlock, parental control is  
not active and the disc plays in full.  
3. Press ENTER to exit.  
4. Press ENTER to confirm your rating selection, then  
press SETUP to exit the menu.  
Password  
Note:  
All the downloaded videos from DivX® VOD can only  
be played back on this unit.  
You can enter or change password.  
1. Select Password on the LOCK menu and then  
press B.  
2. Follow the step 2 as shown above (Rating).  
To change the password, press ENTER when the  
“Change” option is highlighted. Input a password  
and press ENTER. Enter it again and press  
ENTER to verify.  
3. Press SETUP to exit the menu.  
If you forget your password  
If you forget your password, you can clear it using the  
following steps:  
1. Press SETUP to display the Setup menu.  
2. Input the 6-digit number “210499” and press  
ENTER. The password is cleared.  
Area Code  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list on  
page 29.  
1. Select “Area Code” on the LOCK menu then  
press B.  
2. Follow step 2 as shown in the rating section.  
3. Select the first character using v / V buttons.  
4. Press B and select the second character using  
v / V buttons.  
5. Press ENTER to confirm your Area code selection.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
General features  
Buttons  
Operations  
Discs  
ALL  
Z (OPEN / CLOSE)  
X (PAUSE)  
Opens or closes the disc tray.  
During playback, press X to pause playback.  
Press X repeatedly to play Frame-by-Frame.  
ALL  
DVD  
DivX  
SKIP (. / >)  
During playback, press SKIP (. or >) to go to the next  
chapter/track or to return to the beginning of the current  
chapter/track.  
ALL  
Press SKIP . twice briefly to step back to the previous  
chapter/track.  
SCAN (m / M)  
During playback, press SCAN (m or M) repeatedly to  
select the required scan speed.  
DVD : bb, bbb, bbbb, bbbbb, bbbbbb or  
BB, BBB, BBBB, BBBBB, BBBBBB  
DVD  
ACD  
DivX  
MP3  
WMA  
DivX disc : bb, bbb, bbbb, bbbbb or  
BB, BBB, BBBB, BBBBB  
WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)  
REPEAT  
REPEAT A-B  
ZOOM  
During playback, press REPEAT repeatedly to select a  
desired repeat mode.  
DVD Video discs: Chapter/Title/Off  
ALL  
DVD  
DVD  
DVD  
Audio CD, DivX/MP3/WMA discs: Track/All/Off  
During playback, press REPEAT A-B to select a point A and  
a point B and repeats a sequence from point A (Starting  
point) to point B (End point).  
Press REPEAT A-B to exit.  
During playback or in the pause mode, press ZOOM to  
enlarge the video image (3 steps).  
You can move through the zoomed picture using b B v V  
buttons.  
TITLE  
If the current DVD title has a menu, the title menu appears  
on the screen. Otherwise, the disc menu may appear.  
MENU  
The disc menu appears on the screen.  
DVD  
DVD  
DivX  
DivX  
(SUBTITLE)  
During playback, press S-TITLE repeatedly to select a  
desired subtitle language.  
DVD  
DVD  
(AUDIO language) During playback, press AUDIO repeatedly to hear a different  
audio language or audio track.  
In the pause mode, press SCAN (m or M) to select the  
SLOW  
required speed.  
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Saver  
Notes on general features:  
Zoom may not work on some DVDs.  
The screen saver appears when you leave the unit in  
Stop mode for about five minutes.  
The A-B repeat function is available only in the  
current title.  
Last Scene Memory DVD  
This receiver memorizes the last scene from the last  
disc that is viewed. The last scene remains in the  
memory even if you remove the disc from the receiver  
or switch off the receiver. If you load a disc that has  
the scene memorized, the scene is automatically  
recalled.  
Additional features  
1.5 times speed playback  
DVD  
ACD  
MP3  
WMA  
You can play at 1.5 times speed.  
The 1.5 speed allows you to watch the pictures and  
listen to the sound quicker than playing at a normal  
speed on the disc.  
Note:  
This receiver does not memorize the scene of a disc if you  
switch off the receiver before commencing to play the disc.  
1. During playback, press PLAY(B) to play at 1.5  
times speed. “BX1.5” appears on the screen.  
2. Press PLAY(B) again to exit.  
Time Search DVD  
DivX  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback.  
2. Press v / V to select the time clock icon and  
“--:--:--” appears.  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
numbers, press CLEAR to remove the numbers  
you entered. Then input the correct numbers.  
4. Press ENTER to confirm. Playback starts from the  
selected time.  
Marker Search DVD  
To enter a Marker  
DivX  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
To Recall or Clear a Marked Scene  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
3. Press ENTER and playback starts from the  
marked scene. Or press CLEAR and the marker  
number is erased from the list.  
4. You can play any marker by inputting its number  
on the marker search menu.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an Audio CD or  
MP3/WMA file  
Programmed Playback  
The program function enables you to store your  
favorite tracks from any disc in the receiver memory. A  
program can contain 300 tracks.  
This unit can play Audio CDs or MP3/WMA files.  
MP3/ WMA/ Audio CD  
Once you insert a CD with MP3/WMA files or Audio,  
a menu appears on the TV screen.  
1. Insert a disc.  
Audio CD and MP3/WMA Discs:  
2. Select a track on the “List” and then press PROG.  
Press v / V to select a track/file and then press PLAY  
or ENTER, and playback starts. You can use variable  
playback functions. Refer to the page 15.  
or select “  
(Add)” icon and then press ENTER  
to place the selected track on the “Program” list.  
Repeat to place additional tracks on the list.  
ID3 TAG  
When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY. (Song, Artist, Album, Genre, Comment)  
Note:  
You can add all tracks in the disc. Select “  
then press ENTER.  
Add All)” icon  
(
3. Select the track you want to start playing on the  
“Program” list. Press MENU to move to the next  
page.  
Tips:  
Press MENU to move to the next page.  
On a CD with MP3/WMA and JPEG, you can  
switch MP3/WMA and JPEG. Press TITLE, and  
MUSIC or PHOTO top of the menu is highlighted.  
4. Press PLAY or ENTER to start. Playback begins in  
the order in which you programmed the tracks.  
Playback stops after all of the tracks on the  
“Program” list have played once.  
MP3 / WMA disc compatibility with this player is limited  
as follows:  
Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
5. To resume normal playback from programmed  
playback, select a track of AUDIO CD (or  
MP3/WMA) list and then press PLAY.  
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)  
The DVD/CD Receiver cannot read an MP3/WMA file  
that has a file extension other than “.mp3” / “.wma”.  
CD-R physical format should be ISO 9660  
If you record MP3 / WMA files using software that cannot  
create a file system (eg. Direct-CD) it is impossible to  
playback MP3 / WMA files.We recommend that you use  
Easy-CD Creator, which creates an ISO 9660 file  
system.  
File names should have a maximum of 8 letters and  
must incorporate an .mp3 or .wma extension.  
They should not contain special letters such as / ? * : “  
< > l etc.  
Repeat Programmed Tracks  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
2. Press REPEAT to select a desired repeat mode.  
• TRACK: repeats the current track  
• ALL: repeats all the tracks on programmed list.  
• Off (No display): does not play repeatedly.  
Erasing a Track from “Program” List  
The total number of files on the disc should be less than  
999.  
1. Use v V to select the track that you wish to erase  
from the Program list.  
This DVD/CD Receiver requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are many  
different types of recordable disc formats (including CD-R  
containing MP3 or WMA files) and these require certain  
pre-existing conditions (see above) to ensure compatible  
playback.  
2. Press CLEAR. Alternatively, select “  
(Delete)”  
icon then press ENTER to place the selected track  
on the Program list. Repeat to erase additional  
tracks on the list.  
Erasing the Complete Program List  
Customers should note that permission is required in  
order to download MP3 / WMA files and music from the  
Internet. Our company has no right to grant such  
permission. Permission should always be sought from  
the copyright owner.  
Use v / V to select “  
ENTER.  
(Del all)” and then press  
Note:  
The programs are also cleared when the disc is removed.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG  
JPEG disc compatibility with this player is  
limited as follows:  
Viewing a JPEG file  
This unit can play discs with JPEG files.  
Before playing JPEG recordings, read the notes on  
JPEG Recordings on the right.  
• Depending upon the size and the number of  
JPEG files, it could take a long time for the  
DVD/CD Receiver to read the disc’s contents. If  
you don’t see an on-screen display after several  
minutes, some of the files may be too large —  
reduce the resolution of the JPEG files to less  
than 2M pixels as 2760 x 2048 pixels and burn  
another disc.  
1. Insert a disc and close the tray.  
The PHOTO menu appears on the TV screen.  
PHOTO  
List  
Preview  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
1
2
3
4
5
6
7
8
• The total number of files and folders on the disc  
should be less than 999.  
• Some discs may not operate due to a different  
recording format or the condition of disc.  
2. Press v / V to select a folder, and then press  
ENTER. A list of files in the folder appears.  
If you are in a file list and want to return to the  
previous Folder list, use the v / V buttons on the  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
• If the files have “.jpe” or “.jpeg” extensions,  
please rename them as “.jpg” file.  
Remote Control to highlight  
and press ENTER.  
• File names without “.jpg” extension will not be  
able to be read by this DVD/CD Receiver. Even  
though the files are shown as JPEG image files in  
Windows Explorer.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER or PLAY. While  
viewing a file, you can press STOP to move to the  
previous menu (JPEG menu).  
Note:  
When viewing a JPEG file, the resolution is changed 480p if  
the resolution set to 1080i. You can change the resolution for  
720p or 480p.  
Tips:  
There are four Slide Speed options  
:
> (Slow), >> (Normal), >>> (Fast) and II (off).  
Use v /V /b /B to highlight the Speed. Then, use b / B  
to select the option you want to use and then press  
ENTER.  
If you set Speed option to Off, the slide is not active.  
Slide Show  
Use v V b B to highlight the  
(Slide Show) then  
press ENTER.  
Still Picture  
1. Press PAUSE/STEP during the slide show.  
The DVD/CD Receiver will now go into the PAUSE  
mode.  
2. To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
Moving to another File  
Press SKIP (. or >) once during viewing a  
picture to advance to the next or previous file.  
Rotating the picture  
Press v V b B during showing a picture to rotate the  
picture clockwise or counter-clockwise.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DivX Movie file  
Using this DVD/CD Receiver you can play DivX disc.  
DivX disc compatibility with this player is limited  
as follows:  
Available resolution size of the DivX file is under  
800x600 (W x H) pixel.  
1. Insert a disc and close the tray. The MOVIE menu  
appears on the TV screen.  
The file name of the DivX subtitle is available by  
45 characters.  
MOVIE  
0:00:00  
List  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
1
2
3
4
5
6
7
8
If there is impossible code to express in the DivX  
file, it may be displayed as " _ " mark on the  
display.  
• If the number of the screen frame is over 30  
per 1 second, this unit may not operate  
normally.  
2. Press v / V to select a folder and then press  
ENTER. A list of files in the folder appears. If you  
are in a file list and want to return to the Folder list,  
use the v / V buttons on the Remote Control to  
• If the video and audio structure of recorded  
files are not interleaved, either video or audio  
is outputted.  
highlight  
and press ENTER.  
3. If you want to view a particular file, press  
Playable DivX file  
v / V to highlight a file and press ENTER or PLAY.  
".avi ", ".mpg ", ".mpeg ", ".divx"  
4. Press STOP to exit.  
Playable Subtitle format  
SubRip(*.srt/*.txt)  
SAMI(*.smi)  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 2.0(*.sub/*.txt)  
VobSub(*.sub)  
Notice for displaying the Divx subtitle  
If the subtitle does not display properly during playback,  
press and hold S-TITLE for about 3 seconds then press  
S-TITLE to select another language code until the  
subtitle is displayed properly  
Tips:  
Playable Codec format  
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",  
"MP43 ", "3IVX ".  
Press MENU to move to the next page.  
On a CD with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE, and MUSIC, PHOTO and MOVIE  
word on top of the menu is highlighted.  
Playable Audio format  
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".  
• Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
• Bit rate: within 32 - 320kbps (MP3),  
40 - 192kbps (WMA)  
Notes:  
Be sure to select “SUBTITLE ON” mode by  
pressing the subtitle file every time before playing a  
DivX file .  
When the subtile has more than two languages in  
the file, original subtile is only available.  
You can not adjust sound mode and VIRTUAL  
sound during the DivX file playing.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using iPod  
You can enjoy playback of your iPod using the  
supplied remote control.  
Notes:  
• It works with all iPod models that have a dock  
connector.  
iPod is a trademark of Apple Computer, Inc, registered  
in the U.S. and other countries.  
• Compatibility with your iPod may vary depending  
on the type of your iPod.  
• Depending on your iPod’s software version, it may  
not be possible to control your iPod from the unit.  
We recommend installing the latest software  
version.  
General operation  
1. Connect your iPod and the unit with iPod cable.  
Refer to the page 9.  
• Adjust the volume to a moderate level before you  
connect your iPod and this unit.  
2. Turn the unit on.  
Your iPod is automatically turned on.  
3. Press iPod on the remote control to enter the iPod  
mode.  
Playing the iPod in the Remote iPod  
mode  
You can operate your iPod by using the supplied  
remote control and controls on your iPod.  
The iPod menu appears on the TV screen.  
The initial screen of iPod menu is the OSD iPod  
mode.  
4. Use v / V and ENTER on the Remote Control to  
1. Press iPod on the Remote Control until “IPOD”  
appears in the display window.  
display the list of menu.  
5. Press ENTER to play.  
Note:  
You can select the Remote iPod mode or OSD  
iPod mode by pressing repeatedly iPod on the  
remote control.  
General features  
Remote Control  
buttons  
iPod  
buttons  
Operations  
2. Use v / V and ENTER on the Remote Control or  
controls on your iPod to display the list of menu by  
viewing your iPod.  
During pause, press B to  
resume playback.  
B (PLAY)  
X (PAUSE)  
x (STOP)  
B X  
B X  
-
During playback, press X  
to pause playback.  
3. Press ENTER to play.  
Notes:  
During playback, press x  
to stop playback. Press  
ENTER to resume  
playback.  
• When you connect the unit and TV to MONITOR  
IN/OUT, TV screen is turned off temporarily.  
Connect the MONITOR OUT jack on the rear of the  
unit to the VIDEO IN jack on the TV using the video  
cable if you want to view the video or photo file.  
During playback, press  
SKIP (. or >) to go to  
the next track or to return  
to the beginning of the  
current track. Press SKIP  
. twice briefly to step  
back to the previous track.  
SKIP  
./>  
(./>)  
The images of video or photo files are outputted  
only when you connect the unit to the MONITOR  
OUT connector.  
SCAN  
(m / M)  
Music file: During playback,  
press and hold SCAN (m or  
M) and then release at a  
point you want.  
Video file: During playback,  
press and hold SKIP (.  
or >) and then release at  
a point you want.  
During playback, press  
REPEAT repeatedly to  
select a desired repeat  
mode. (Track/All/Off)  
REPEAT  
MENU  
REPEAT  
MENU  
Moves to the previous  
menu.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing the iPod in the OSD iPod  
mode  
You can operate your iPod by controlling OSD menu  
on the TV screen with the supplied remote control.  
The controls on your iPod are not operational in the  
OSD iPod mode.  
iPod message  
Remote iPod  
When you connect the unit and  
TV to COMPONENT VIDEO  
IN/OUT or HDMI IN/OUT in the  
Remote iPod mode, the screen  
on the left appears.  
Please use Monitor output  
for viewing Video and photo  
from iPod.  
Connect the unit and TV to  
1. Press iPod on the Remote Control until “OSD  
IPOD” appears in the display window.  
MONITOR IN/OUT  
.
2. Use v / V and ENTER on the Remote Control to  
When you select the Photos or  
Videos menu in the OSD iPod  
mode, the screen on the left  
appears. Change the unit to the  
Remote iPod mode.  
display the list of menu.  
3. Press ENTER to play.  
When you connect the iPod that  
is not supported on this unit, the  
screen on the left appears.  
Music  
Classifies and plays the files by Playlists, Artists,  
Albums, Genres, Songs, and Composers.  
If the power of your iPod is  
insufficient or the iPod is  
misconnected or unknown  
device, the screen on the left  
appears.  
Photos / Videos  
The video or photo file is not played in the OSD iPod  
mode.  
If you want to play the video or photo file, change to  
the Remote iPod mode.  
Now Playing  
Displays and plays the last played music file.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Audio Discs  
Moving to another GROUP  
Some DVD Audio discs divide content into different  
groups. Your player enables you to quickly access  
different groups during playback via the on-screen  
display.  
DVD Audio is a new disc format building on the  
success of DVD to provide high quality,  
uncompressed, multi-channel audio for a new  
experience in audio quality. A DVD Audio disc can be  
identified by the DVD audio logo on the disc jacket or  
on the disc itself.  
1. Press DISPLAY during playback on in stop mode.  
2. Press 3/4 to select Group icon.  
DVD Audio can provide higher quality stereo than  
Audio CDs with a sampling rate of up to 192kHz  
(compared to 44.1kHz for CDs). DVD Audio digital  
sound can be delivered with up to 24 bits of data  
(compared to 16 bits for a standard CD).  
3. Press 1/2 or the numbered buttons (0-9) to select  
a group number.  
Note:  
Sometimes the author of the disc creates hidden  
content that can only be accessed by entering a  
password. If the lock icon appears on the TV screen,  
enter the password (sometimes you’ll find it on the  
disc’s jacket cover or on a web site). This password  
control isn’t dictated by your DVD/CD Receiver — it is  
a function of the disc.  
A typical DVD Audio disc contains up to seven times  
the data capacity of a CD. This additional space is  
used for music, either Advanced Resolution multi-  
channel sound quality that is closer to the artist’s  
master recording or for longer recordings. Many DVD  
Audio discs contain on-screen text, such as artist  
biographies, playlists, or lyrics. Some DVD Audio  
discs contain photo galleries or video clips.  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
Viewing another PAGE  
Since DVD Audio discs can hold a lot of content, there  
are various ways to see what’s available on the disc.  
1. Press DISPLAY during playback.  
2. Press 3/4 to select Page icon.  
3. Press 1/2 to select a page number.  
What appears on the screen will vary from disc to  
disc because the information available depends  
upon the way the disc was created.  
Note:  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting the Radio Stations  
Listening to the Radio  
You can preset 50 stations for FM and AM (MW).  
Before tuning, make sure that you have turned down  
the volume.  
Preset radio stations in the DVD/CD Receiver’s  
memory first (see “Presetting radio stations” on the  
left).  
1. Press TUNER on the Remote Control until FM or  
AM (MW) appears in the display window.  
1. Press TUNER until FM or AM (MW) appears in the  
display window.  
The last received station is tuned in.  
2. And then every time you press TUNER, FM and  
AM (MW) changes alternately.  
2. Press PRESET (-/+) repeatedly on the Remote  
Control to select the preset station you want.  
Each time you press the button, the DVD/CD Receiver  
tunes in one preset station at a time.  
3. Press and hold TUN.(-/+) for about two seconds  
until the frequency indication starts to change,  
then release.  
Scanning stops when the DVD/CD Receiver tunes in a  
station.  
3. Adjust the volume by rotating VOLUME on the  
front panel or by pressing VOLUME + or - on the  
Remote Control repeatedly.  
4. Press PROG./MEMO. on the Remote Control.  
A preset number will flash in the display window.  
To turn off the radio  
Press POWER to turn the DVD/CD Receiver off or  
select another function mode (DVD/CD, AUX, USB).  
5. Press PRESET (-/+) on the Remote Control to  
select the preset number you want.  
To listen to non-preset radio stations  
Use manual or automatic tuning.  
6. Press PROG./MEMO. on the Remote Control  
again.  
The station is stored.  
For manual tuning, press TUN.(-/+) repeatedly.  
7. Repeat steps 3 to 6 to store other stations.  
For automatic tuning, press and hold TUN.(-/+) for  
about two seconds on the front panel.  
To tune in a station with a weak signal  
Press TUN.(-/+) repeatedly in step 3 to tune in the  
station manually.  
To select a preset radio station directly  
You can use the number buttons on the Remote  
Control to select a preset radio station directly.  
For example, to listen to the preset station 4, press 4  
on the Remote Control. To listen to the preset station  
19, press 1 and then 9 (within 3 seconds).  
To clear all the stored stations  
Press and hold PROG./MEMO. for about two seconds  
and “ERASE ALL” appears in the display window and  
then press PROG./MEMO. again, the stations are  
cleared.  
For your reference  
If an FM program is noisy  
If you have accidentally entered into the "ERASE  
ALL" mode and you do not wish to clear the  
memory, do not press any key. After a few seconds,  
"ERASE ALL" will go off by itself and change to  
normal mode.  
Press MONO/ST. on the front panel to make  
“STEREO” disappear in the display window. There  
will be no stereo effect, but the reception will  
improve. Press the button again to restore the  
stereo effect.  
To improve reception  
Reorient the supplied antennas.  
Note:  
If all stations have already been entered, the FULL  
message will appear in the display window for a  
moment and then a preset number will flash.  
To change the preset number, follow steps 5-6 as  
above.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sleep Timer Setting  
You can set the DVD/CD Receiver to turn off  
automatically at a specified time.  
XTS/XTS pro  
Each time you press XTS pro the setting changes in  
the following order.  
1. Press SLEEP to set the desired sleep time.  
The SLEEP indicator and the sleep time appears in the  
display window.  
XTS ON NORMAL XTS-P ON...  
XTS-P ON  
The unique sound quality of the LG Technology  
creates the optimum sound for you to play the  
perfect playback of the original sound and to feel  
the living sound source.  
2. Each time you press SLEEP the setting  
changes in the following order.  
SLEEP 180 150 12090 80 70 6050 →  
40 30 20 10 OFF (No display)  
XTS ON  
When playing a movie with weak bass relative to  
the general music, it forces sound to the woofer.  
In the mode of 2 CH BYPASS, It creates the high  
display effect by playing the sound source via the  
rear speakers same as the front speakers.  
Note:  
You can check the remaining time before the DVD/CD  
Receiver turns off.  
Press SLEEP. The remaining time appears in the  
display window.  
Note  
The XTS mode is temporarily disabled when changing from  
2.1 CH to 5.1 CH and it is enabled when changing it to 2.1  
CH.  
Dimmer  
This function will change the brightness of the display  
window on the front panel during in power-on status.  
NORMAL  
Press the DIMMER repeatedly.  
XTS-P and XTS mode tune off  
Mute  
VIRTUAL sound  
Press MUTE to mute your unit.  
Press VSM to set the VIRTUAL sound.  
You can mute your unit in order, for example, to  
answer the telephone, the “MUTE” indicator flashes in  
the display window.  
Source  
2.1 ch.  
5.1 ch  
Display  
VIRTUAL  
VIRTUAL  
Effect  
3D STEREO  
Multichannel sound  
Selecting input source  
You can use VCRs or other units connected to the AV  
IN or Optical connector. Refer to the Owner’s Manual  
supplied with the unit for further information on the  
operation.  
3D STEREO  
Realtime 3D positioned sound rendering  
technology with stereo sources, optimized for  
stereo speakers. Listeners may experience  
amazing virtual surround effects with their own  
multimedia players.  
Press AUX repeatedly on the Remote Control to  
select the desired input source.  
Each time you press this button, the mode of the  
function changes in the following sequence:  
Multichannel sound  
AUX : for selecting the analog signal from AUX AUDIO  
Input (L/R) Connector.  
The Multichannel sound changes the sound in 5.1  
ch into a virtual one in the 10.1 ch so that it  
provides such a feeling that you listen to the sound  
simultaneously from the right and left speakers and  
center speaker.  
AUX OPT: for selecting the optical digital signal from  
OPTICAL IN Connector.  
AUDIO IN: for selecting the analog signal from AUDIO IN  
Connector.  
Sound Mode  
Notes  
You can enjoy surround sound simply by selecting  
one of the pre-programmed sound fields according to  
the program you want to listen to. (2 ch. sound only)  
The Optical input function is available only when the  
sampling frequency of other unit is 32 - 96kHz.  
You can also select the input source by pressing  
FUNC. button on the front panel.  
Press SOUND button repeatedly.  
The sound mode is changed in the display window in  
the following order.  
BYPASS ON STAGE STUDIO CLUB HALL  
THEATER 1 CHURCH PL ll MOVIE  
Press and hold this button for about 3 seconds,  
then press repeatedly to select other function.  
PL ll MUSIC PL ll MTRX BYPASS...  
Note:  
Initial sound mode is BYPASS.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Activating Your Service  
XM Satellite Radio Operation  
A one-time activation fee is required to establish an  
account and activate service with XM Satellite Radio.  
Applicable activation changers will be added to your  
first bill.  
What is XM Satellite Radio?  
XM Radio is the satellite radio service with millions of  
listeners across the U.S.  
Broadcasting live daily. XM Radio offers 160 digital  
radio channels offering music, news, sports, comedy,  
talk, entertainment, traffic and weather reports, with  
high quality digital sound.  
1. Before activating XM service, make sure your XM  
equipment is tuned to the XM Preview Channel  
(Channel 1).  
2. Determine your eight-character XM Satellite Radio  
ID number by referencing the label on your XM  
Passport System packaging, rear cover, or by  
selecting channel 0. The ID number will appear on  
the display.  
XM service subscription sold separately. XM Passport  
System required to receive XM service (sold  
separately). Installation costs and other fees and  
taxes, including a one-time activation fee may apply.  
XM service only available in the 48 contiguous United  
States. Residents in Canada please see information  
about Canadian Satellite Radio at the following  
Play is a trademark of XM Satellite Radio Inc. ©2006  
XM Satellite Radio Inc. All rights reserved.  
Note:  
Carefully check your XM Satellite Radio ID. The letter  
I, O, S, and F are not used  
3. Activate your XM Satellite Radio service. Make  
sure you have a major credit card and your XM  
Satellite Radio ID number handy.  
What is XM Ready?  
To activate via the internet: Visit  
An audio system labeled “XM Ready” means that the  
system with the addition of an XM Passport Antenna  
has everyting you need to play XM. Everything else is  
built inside.  
To activate via phone: Call 1-800-XM-RADIO (967-2346)  
A one-time activation fee will apply.  
XM Satellite Radio connections  
Connect the XM Digital Antenna to the XM passport  
system on the unit.  
Selecting the XM Satellite Radio  
Press TUNER on the Remote Control until  
“ANTENNA” appears in the display window.  
XM information  
INPUT  
MONITOR  
L
-
AUX  
-
R
When receiving the XM Satellite Radio containing, you  
can see the information in the display window.  
HDMI OUT  
XM IN  
Y
PB  
PR  
COMPONENT VIDEO (PROGRESSIVE SCAN)  
i
Pod  
OUT PUT  
Press XM MODE to change XM display mode.  
Channel Number Channel Label →  
Song Name/Artist Name Signal Strength →  
Channel Number → ...  
XM  
Channel Number :  
XM passport system  
Display current XM Channel Number  
Channel Number shows 3 seconds regardless its  
display mode when channel is changed.  
When user edits or change preset, it works on  
channel number display mode.  
Channel Label  
Display name of current channel.  
Song Name & Artist Name  
Display song name & artist name as scroll.  
Signal Strength  
Signal Strength is showed by 3 bars with antenna  
shape.  
No Bar: No Signal.  
One Bar: Weak Signal  
Two Bar: Marginal Signal  
Three Bar: Good Signal  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Category search mode is released below case.  
Presetting the XM Satellite Radio Stations  
CAT is inputted in Category search mode.  
You can preset 50 stations for XM. Before tuning,  
make sure that you have turned down the volume.  
No input of PRESET (-/+), XM CH - or XM CH + key  
for 15 seconds.  
1. Press TUNER to select XM band.  
Advisory Message  
2. Use XM CH (-/+) on the Remote Control to select  
the desired channel.  
XM Passport System is not  
connected  
Check the connection of XM  
Passport System  
ANTENNA  
SVC ANT  
UPDATING  
3. Press PROG/MEMO. on the Remote Control.  
4. Press PRESET (-/+) on the Remote Control to  
select the preset number you want.  
XM Passport System does not  
work properly  
Need service of XM Passport  
System  
5. Press PROG/MEMO. on the Remote Control  
again.  
The station is stored.  
XM Passport System is not  
activated, or User does not have  
authorization for specific channel  
Subscribe activation of XM  
Passport System  
6. Repeat steps 2 to 5 to store other stations.  
To clear all the stored stations  
Press and hold PROG/MEMO. for about two seconds  
and “ERASE XM” is shown in the display window and  
then press PROG/MEMO. again, the stations are  
cleared.  
Receiving signal is too weak  
XM Passport System to south  
window for best reception  
NO SIGNAL  
OFF AIR  
If you have accidentally entered into the "ERASE  
XM" mode and you do not wish to clear the  
memory, do not press any key. After a few seconds,  
the "ERASE XM" display will go off by itself and  
change to normal mode.  
Selected channel is not  
broadcasting currently.  
Check programming list, select  
another channel.  
XM Passport System is now  
decoding channel.  
Wait completion of decoding  
process  
LOADING  
XM---  
Channel Selection  
Preset Search  
Use PRESET (-/+) on the Remote Control repeatedly  
to select the preset station you want.  
Selected channel is not available.  
Check programming list, select  
another channel.  
Direct Tuning  
1. Using Numeric button on Remote Control, select  
channel number directly.  
Channel label or Song name/Artist  
name or Category name is not  
available  
--------  
----/----  
--------  
2. Press ENTER after more than one numeric key  
input, system moves to new channel immediately.  
Channel up/down  
Use XM CH (-/+) repeatedly to select the channel you  
want.  
Category Search  
1. Select the Category Search mode using the CAT  
key on the Remote Control.  
(CAT Icon Blinking in Category Search mode.)  
2. PRESET (-/+) changes target of category for  
search, XM CH - or XM CH + selects next channel  
of selected category in category search mode.  
Note:  
Category type of current channel displays for 3  
seconds when category key is inputted in not category  
display mode  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controlling your TV with the  
Suppllied Remote Control  
You can control the sound level, input source, and  
power switch of your LG TV with the supplied Remote  
Control.  
TUNER  
AUX  
OPEN/CLOSE  
DVD  
POWER  
DIMMER  
USB  
iPod  
AUDIO  
SOUND  
S-TITLE  
CLEAR  
You can control your TV using the buttons below.  
REPEAT  
REPEAT A-B  
MARKER  
SEARCH  
By pressing  
You can  
SCAN  
TITLE  
SKIP  
+
SCAN +  
TV POWER  
Turn the TV on or off.  
CHANNEL(v / V) Scans up or down through  
STOP  
PLAY  
PAUSE/STEP  
memorized channels.  
VOLUME +/–  
TV INPUT  
Adjust the volume of the TV.  
ZOOM  
DISPLAY  
SETUP  
Switch the TV’s input source  
between the TV and other input  
sources.  
MENU  
XM CH  
RETURN  
XM CH  
ENTER  
Note:  
Depending on the unit being connected, you may not  
be able to control your TV using some of the buttons.  
SLEEP  
MUTE  
Controlling other TVs with the  
Supplied Remote Control  
VOL  
You can control the sound level, input source, and  
power switch of non-LG TVs as well. If your TV is  
listed in the table below, set the appropriate  
manufacturer code. (refer to page 28)  
1. While holding down TV POWER button, press the  
number buttons to select the manufacturer code  
for your TV (Refer to table on the right column).  
CAT/HDMI  
XM MODE/RESOL.  
PROG./MEMO.  
2. Release TV POWER button.  
POWER  
INPUT  
CHANNEL  
VOL  
TV Control  
Buttons  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controlling other TVs with the Supplied Remote Control (Continued)  
If more than one code number is listed, try entering them one at a time until you find the one that works with  
your TV.  
Manufacturer  
ADMIRAL  
AIWA  
Code Number  
16,33,37,44,45  
70  
01  
Manufacturer  
MONTGOMERY  
WARD  
Code Number  
01,06,08,09  
23,24,32,33,34  
01,08  
AKAI  
NEC  
AMARK  
09  
NOBLEX  
07  
AOC  
01  
33  
18,19  
51  
07  
08  
43  
49,50,51,52,53,54,55  
09  
09  
01,03,08,33,35,37,44  
16,38,39,40,41,42,43  
01,08  
01,09,16,17,18,19  
28,29  
PACKARD BELL  
PANASONIC  
PHILCO  
43  
BELL & HOWELL  
BROKSONIC  
CANDLE  
07,11,13,25,35,36  
01,06,07,08,09,  
15,38,43,58  
06,07,43,61,62,65  
30  
09  
03,37,44  
11,13  
16,17,23  
01,03,37,44,69  
16,17,23  
08  
01,08,09,25,68  
28,29  
01,08  
09,25,26,27,28,29  
64  
09,22,23,24,60,66  
01,06,08,09,10,  
23,24,33,34  
12,62  
51  
PHILIPS  
CCE  
PIONEER  
PORTLAND  
PROSCAN  
QUASAR  
RADIO SHACK  
RCA  
REALISTIC  
SAMPO  
SAMSUNG  
SANYO  
CENTURION  
CINERAL  
CITIZEN  
CORONADO  
CROWN  
CURTIS MATHES  
DAEWOO  
DAYTRON  
EMERSON  
FISHER  
SCOTT  
SEARS  
SEMP  
SHARP  
FUNAI  
46,47  
GENERAL ELECTRIC  
GRADIENTE  
HITACHI  
JC PENNEY  
JVC  
KIOTE  
KMC  
KTV  
LG (GOLDSTAR)  
LODGENET  
LOGIK  
LXI  
MAGNAVOX  
03,10,11,13,37,44  
01,56,57,63,67  
09,14,15,43  
01,08,10,27,35  
20,21,63,67  
43  
SIGNATURE 2000  
SONY  
SOUNDESIGN  
SYLVANIA  
09  
01,04,05,06,07,  
08,35,51  
46,47  
01,08,09,31  
01,07,08,09,35,39,40  
33  
SYMPHONIC  
TATUNG  
TEKNIKA  
TELERENT  
THOMSON  
YORX  
TOSHIBA  
WARDS  
XR1000  
11  
33  
07,09,16,33,51  
09,33  
69  
08  
01,25,26,27,64  
01,06,08,09,10,33,34  
48  
09,24,25,26,27,28,29  
01,02,04,05,06,  
07,08,09,20,  
34,35,43,51,61,62,65  
33  
01,32  
MAJESTIC  
MARANTZ  
MEMOREX  
MGA/MITSUBISHI  
33  
ZENITH  
01, 02,33,59  
01,08,32,34  
Notes:  
• Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.  
• If you enter a new code number, the code number previously entered will be erased.  
• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the  
appropriate code number again.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Sindhi  
Area Codes  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
FI  
FR  
DE  
GB  
GR  
GL  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
NL  
Heard and McDonald Islands HM  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
HK  
HU  
IN  
ID  
IL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
IT  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
JM  
JP  
KE  
KW  
LY  
LU  
PT  
RO  
El Salvador  
Zimbabwe  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Correction  
Cause  
Symptom  
No power.  
• Plug the power cord securely into the  
wall outlet.  
• The power cord is disconnected.  
• Insert a disc. (Check that the DVD or,  
audio CD indicator in the DVD display  
is lit.)  
• No disc is inserted.  
The power is on, but  
the DVD/CD Receiver  
does not work.  
• Select the appropriate video input  
mode on the TV so the picture from  
the DVD/CD Receiver appears on the  
TV screen.  
• The TV is not set to receive DVD signal  
output.  
No picture.  
• Connect the video cable into the  
jacks securely.  
• The video cable is not connected  
securely.  
• Turn on the TV.  
• The connected TV power is turned off.  
There is no sound or  
only a very low-level  
sound is heard.  
• Select the correct input mode of the  
audio receiver so you can hear the  
sound from the DVD/CD Receiver.  
• The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
• Connect the audio cable into the  
jacks securely.  
• The audio cables are not connected  
securely.  
• Turn on the equipment connected  
with the audio cable.  
• The power of the equipment connected  
with the audio cable is turned off.  
• Replace it with new one.  
• Clean the disc.  
• The audio connecting cable is damaged.  
• The disc is dirty.  
The playback picture is  
poor.  
• Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display  
is lit.)  
The DVD/CD Receiver • No disc is inserted.  
does not start playback.  
• Insert a playable disc. (Check the  
disc type, colour system and Regional  
code.)  
• An unplayable disc is inserted.  
• Place the disc with the playback side  
down.  
• The disc is placed upside down.  
• Place the disc on the disc tray  
correctly inside the guide.  
• The disc is not placed within the guide.  
• Clean the disc.  
• The disc is dirty.  
• Press the SETUP button to turn off  
the menu screen.  
• A menu is on the TV screen.  
• Cancel the Rating function or change  
the rating level.  
• The Rating level is set.  
• Clean the disc.  
Loud hum or noise is  
heard.  
• The disc is dirty.  
• Connect the speakers and  
components securely.  
• The speakers and components are  
connected poorly.  
• Move your TV away from the audio  
components.  
• The DVD/CD Receiver is located too  
close to the TV.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cause  
Correction  
Symptom  
• The antenna is positioned or connected  
poorly.  
• Connect the antenna securely.  
Radio stations cannot  
be tuned in.  
• Adjust the antennas and connect an  
external antenna if necessary.  
• The signal strength of the stations is too  
weak (when tuning in with automatic  
tuning).  
• Tune in the station manually.  
• No stations have been preset or preset  
stations have been cleared (when  
tuning by scanning preset stations).  
• Preset the stations (page 23).  
The Remote Control is not pointed at the • Point the Remote Control at the Remote  
The Remote Control  
does not work  
properly.  
remote sensor of the DVD/CD Receiver.  
Sensor of the DVD/CD Receiver.  
• The Remote Control is too far from the  
DVD/CD Receiver.  
• Use the Remote Control within about 23  
ft (7 m).  
• There is an obstacle in the path of the  
Remote Control and the DVD/CD  
Receiver.  
• Remove the obstacle.  
• The batteries in the Remote Control are  
flat.  
• Replace the batteries with new ones.  
• Press DIMMER on the Remote Control.  
The front panel  
display is too dim.  
• Nothing is displayed on the front panel  
display.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power supply  
Power consumption  
Refer to main label.  
Refer to main label.  
Net Weight  
3.9 kg  
430 x 70 x 310 mm  
Temperature: 5°C to 35°C, Operation status: Horizontal  
5% to 85%  
External dimensions (W x H x D)  
Operating conditions  
Operating humidity  
Laser  
Signal system  
Semiconductor laser, wavelength 650 nm  
NTSC 525/60  
Frequency response (audio)  
Signal-to-noise ratio (audio)  
Dynamic range (audio)  
Harmonic distortion (audio)  
Video input  
200 Hz to 18 kHz  
More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)  
More than 70 dB  
0.5 % (1 kHz, at 1W position) (20 kHz LPF)  
1.0 V (p-p), 75 , negative sync., RCA jack x 1  
1.0 V (p-p), 75 , negative sync., RCA jack x 1  
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1  
(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1  
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz  
10.7 MHz  
Video output  
COMPONENT VIDEO OUT  
Tuning Range  
Intermediate Frequency  
Signal-to Noise Ratio  
Frequency Response  
Tuning Range  
Intermediate Frequency  
Stereo mode  
60 dB (Mono)  
140 - 10,000 Hz  
522 - 1,620 kHz or 520 - 1,720 kHz  
450 kHz  
100 W + 100 W (4at 1 kHz, THD 10 %)  
Front: 100 W + 100 W (THD 10 %)  
Center*: 100 W  
Surround*: 100 W + 100 W (4at 1 kHz, THD 10 %)  
Subwoofer*: 200 W (3at 30 Hz, THD 10 %)  
AUDIO IN, OPTICAL IN  
Surround mode  
(* Depending on the sound mode  
settings and the source, there  
may be no sound output.)  
Inputs  
Outputs  
MONITOR OUT, HDMI OUT,  
COMPONENT VIDEO OUT  
Passive Subwoofer  
(SH72TN-W)  
Front Speaker  
(SH72TN-F)  
Center Speaker  
(SH72TN-C)  
Rear Speaker  
(SH72TN-S)  
1 Way 1 Speaker  
2 Way 1 Speaker 2 Way 1 Speaker  
Type  
3 Way 2 Speaker  
4 EXCITER  
4 EXCITER  
4 EXCITER  
4 Ω  
4 Ω  
3 Ω  
4 Ω  
Impedance  
110 - 20000 Hz  
80 dB/W (1m)  
170 - 20000 Hz  
80 dB/W (1m)  
Frequency Response  
Sound Pressure Level  
Rated Input Power  
Max. Input Power  
Net Dimensions (W x H x D)  
Net Weight  
40 - 1,500 Hz  
82 dB/W (1m)  
160 - 20000 Hz  
80 dB/W (1m)  
100W  
200W  
300x1350x300 mm  
5.2 kg  
100W  
200W  
500x168x102 mm  
1.2 kg  
200W  
400W  
231x451x381 mm  
7.8 kg  
100W  
200W  
300x1350x300 mm  
5.1 kg  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or  
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date  
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original  
purchaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
Call 1-800-243-0000 for instructions on getting the  
defective unit repaired or replaced.  
PARTS: One Year from the Date of Purchase.  
Please retain dated sales receipt and your box to  
return the unit to LG for repair or replacement.  
* Parts replaced are warranted for the remaining portion  
of the original warranty period.  
Shipping both ways will be paid by LG during the first 90  
days of the Warranty Period. During the remainder of the  
Warranty Period (91-365 days), you pay inbound shipping  
charges and LG pays return shipping charges.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED  
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG  
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE  
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER  
DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of  
incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may  
not apply to you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
z Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,  
maintenance or failure to maintain, or separate system components; and  
z Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside  
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,  
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or  
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer  
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For nearest Authorized Service Center, Where to buy,  
Product Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year)  
and select appropriate options from the menu.  
Or visit our website at http://www.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
ENGLEWOOD CLIFFS, NJ.  
P/NO : MFL38637175  
Issue O  
Printed in Indonesia  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kyocera Printer FS 1116MFP User Manual
Lennox Hearth Indoor Fireplace EDVI25 User Manual
Lenovo Personal Computer B540 B540P User Manual
Makita Power Hammer HM1202 User Manual
Makita Saw JS1670 User Manual
Manitowoc Ice Ice Maker KH0179 User Manual
McCulloch Lawn Mower ZM3016BF 966564001 User Manual
Mercedes Benz Automobile 2002 M Class User Manual
Metra Electronics Automobile Accessories CHTO 013 User Manual
Microsoft Video Games X11 35541 User Manual