DP280-N_AA1ULLW
Portable DVD Player
Owner’s Manual
Model: DP781
Before connecting, operating or adjusting this
product, please read this instruction booklet carefully
and completely.
For service/
support Call:
Toll Free Number
1-800-243-0000
© Copyright 2007, LG Electronics U.S.A., Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions (Continued)
FCC WARNING: This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the instruc-
tion manual. The user could lose the authority to operate this equipment if
an unauthorized change or modification is made.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated
circuit;
That is, a single outlet circuit which powers only that appliance and
has no additional outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Do not overload wall outlets. Overloaded wall outlets, loose or dam-
aged wall outlets, extension cords, frayed power cords, or damaged
or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of
your appliance, and if its appearance indicates damage or deteriora-
tion, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
To disconnect power from the mains, pull out the mains cord plug.
When installing the product, ensure that the plug is easily accessible.
•
FCC COMPLIANCE: The responsible party for this product’s compliance is:
LG Electronics U.S.A., Inc.,
1000 Sylvan Avenue, Englewood Cliffs, NJ.
Phone: 1-201-816-2000.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE
MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A ground-
ing type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obso-
lete outlet.
This product has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards incorpo-
rated in this product will protect you if you observe the following procedures for
installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
product.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PER-
SONNEL ONLY.
11. Only use attachments/accessories specified by the manufacturer.
1. Read these instructions. - All these safety and operating instructions should
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with apparatus. When a cart is used, use caution
when moving the cart/product combination to avoid injury from tip-over.
be read before the product is operated.
2. Keep these instructions. - The safety, operating and use instructions should
be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating instruc-
tions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be followed.
5. Do not use this apparatus near water. – For example: near a bath tub, wash
bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool;
and other areas located near water.
6. Clean only with dry cloth. – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners.
13. Unplug this product during lightning storms or when unused for long
periods of time.
7. Do not block any ventilation openings. Install in accordance with the man-
ufacturer’s instructions. - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it from
over- heating. The openings should never be blocked by placing the product on
a bed, sofa, rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer’s instructions have been adhered to.
14. Refer all servicing to qualified service personnel. Servicing is required
when the product has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the product, the product has been exposed to rain or moisture, does
not operate normally, or has been dropped.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Playing an Audio CD or MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . . 29
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Repeat Programmed Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Erasing a Track from Program List . . . . . . . . . . . . . . . . . . . . . . . . 30
Erasing the Complete Program List. . . . . . . . . . . . . . . . . . . . . . . . 30
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Still Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Moving to another file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To rotate picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
To listen to MP3/WMA music while watching picture . . . . . . . . . . . 32
JPEG disc compatibility with this unit is limited as follows . . . . . . . 32
Playing a DVD VR format Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . 4
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Before Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
About the
Symbol Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Symbol Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Identification of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-12
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-16
Connect the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connect the Automotive adapter. . . . . . . . . . . . . . . . . . . . . . . . . .14
Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Rotating the LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Playing an USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Connections
Setting up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-37
AV output Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
AV input Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Audio Connection to Optional Equipment . . . . . . . . . . . . . . . . . . . 37
Advanced Operations
Displaying Disc Information on-screen. . . . . . . . . . . . . . . . . . . . . . . . . 19
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-24
General Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LOCK (Parental Control). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23
OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27
Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Reference
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Language Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Area Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the
edges so that fingerprints do not get on the surface. Never stick
paper or tape on the disc.
This manual provides information on the operation and mainte-
nance of your unit. Should the unit require service, contact an
authorized service location.
About the
Symbol Display
“
” may appear on your LCD display during operation and
indicates that the function explained in this owner’s manual is not
available on that specific Disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to
direct sunlight or sources of heat and never leave it in a parked
car exposed to direct sunlight.
Symbol Used in this Manual
NOTE
Cleaning Discs
Indicates special notes and operating features.
Fingerprints and dust on the disc can cause poor picture quality
and sound distortion. Before playing, clean the disc with a clean
cloth. Wipe the disc from the center out.
TIP
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
ALL
All discs and files listed below
DVD DVD and finalized DVD R/RW
ACD Audio CDs.
Do not use strong solvents such as alcohol, benzine, thinner, com-
mercially available cleaners, or anti-static spray intended for older
vinyl records.
WMA files.
WMA
MP3 MP3 files.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Maintaining the Unit
Maintenance and Service
The DVD player is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn, the picture
quality could be diminished.
Refer to the information in this chapter before contacting a service
technician.
Depending on the operating environment, regular inspection and
maintenance are recommended after every 1,000 hours of use.
Handling the Unit
For details, please contact your nearest authorized service center.
When shipping the unit
Please save the original shipping carton and packing materials. If
you need to ship the unit, for maximum protection, re-pack the unit
as it was originally packed at the factory.
Keeping the exterior surfaces clean
•
Do not use volatile liquids near the unit.
•
Do not leave rubber or plastic products in contact with the unit
for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are
extremely dirty, use a soft cloth lightly moistened with a mild deter-
gent solution.
Do not use strong solvents such as alcohol, benzine, or thinner, as
these might damage the surface of the unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use (Continued)
Types of Playable Discs
Regional Code
This unit has a regional code printed on the rear of the unit. This
unit can play only DVD discs labelled same as the rear of the unit
or “ALL”.
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
Notes on Regional Codes
In addition, this unit plays DVD R/RW and CD-R/RW, USB that
contains audio titles, MP3, WMA, and/or JPEG files.
• Most DVD discs have a globe with one or more numbers in it
clearly visible on the cover. This number must match your unit’s
regional code or the disc cannot play.
This indicates a product feature that is capable of
playing DVD-RW discs recorded with Video Recording
format.
• If you try to play a DVD with a different regional code from your
player, the message “Check Regional Code” appears on the TV
screen.
NOTES
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby Laboratories.
• Depending on the conditions of the recording equipment or the
CD-R/RW (or DVD R/RW) disc itself, some CD-R/RW
(or DVD R/RW) discs cannot be played on the unit.
• Do not attach any seal or label to either side (the labeled side or
the recorded side) of a disc.
DTS and DTS Digital Out are trademarks of Digital
Theater Systems, Inc.
•
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Customers should note that permission is required in order to
download MP3 / WMA files and music from the Internet. Our
company has no right to grant such permission. Permission
should always be sought from the copyright owner.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Main Unit
• MENU: Accesses menu on a DVD disc.
• COLOR/BRIGHT: Selects the mode of LCD adjustment
Brightness → Color → OFF
• FLIP: Rotates the screen.
a
b
e Menu Control Buttons
• b B v V (left/right/up/down): Selects an item in the menu.
• b B: Adjusts the COLOR/BRIGHT.
• ENTER: Confirms menu selection.
f Disc Lid
g OPEN button: Push this button to open the Disc lid.
Touch Pad Operation
c
d
e
The buttons from c to e are touch pad type button that is
operated with brief touch.
When you operate the button on the touch pad, you should fol-
low the directions as below.
1.Touch the ENTER button on the touch pad to light up the
e buttons.
f
g
2.Touch a button you want to operate. The e buttons will be off
in 10 seconds after the operation.
a LCD screen
Precautions in using the touch pad
b Speaker
• The LEDs on the touch pad lights only when the power of the
unit is on.
• Use the touch pad with clean and dry hands.
• Do not press the button on the touch pad with too much force.
• Do not touch the button on the touch pad with any conductive
material.
c LCD MODE: NORMAL → 4:3 mode → OFF
d Function Buttons
• DISPLAY: Accesses On-Screen display.
• MODE: Selects a mode among DISC, AV IN or USB.
• SETUP: Accesses or removes setup menu.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (Continued)
Main Unit
a Volume Control
b Earphones jacks
c COAXIAL jack
d AV IN/OUT jack
e DC IN
:
Connect the AC adapter or Automotive adapter.
f Remote sensor
a
b
c
d
e
Receive the signal from the Remote Control for operation.
g Battery charge indicator
h
(POWER): Switches the player ON or OFF.
i Playback buttons
• x ( STOP ): Stops playback.
• B/X ( PLAY/PAUSE ):
Starts playback/ Pauses playback temporarily.
• . (Reverse SKIP/SEARCH )
f
g
h
i
Search backward*/ go to beginning of current chapter or
track or go to previous chapter or track.
• > (Forward SKIP/SEARCH)
Search forward*/ go to next chapter or track.
* Press and hold button for about two seconds.
j USB: Connect a USB Flash Drive.
j
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls (Continued)
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
Remote Control
POWER: Switches DVD Player ON or OFF.
AUDIO: Selects an audio language.
SUBTITLE: Selects a subtitle language.
ANGLE: Selects a DVD camera angle, if
available.
PAUSE/STEP ( X ): Pauses playback
temporarily/ press repeatedly for
frame-by-frame playback.
PLAY (N): Starts playback.
STOP ( x ): Stops playback.
a
b
0-9 number buttons:
Reverse SKIP/SEARCH ( . ):
Search backward*/ go to beginning of current
chapter or track or go to previous chapter or
track.
Selects numbered items in a menu.
PROG.: Places a track on the program list.
CLEAR: Removes a track number on the
program list or a mark on the MARKER
SEARCH menu.
Forward SKIP/SEARCH ( > ):
Search forward*/ go to next chapter or track.
* Press and hold button for about two
seconds.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
TITLE: Displays title menu, if available.
REPEAT: Repeat chapter, track, title all.
A-B: Repeat sequence.
SLOW ( t / T ): Reverse/ Forward slow
c
d
playback.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
SETUP: Accesses or removes setup menu.
MENU: Accesses menu on a DVD disc.
RETURN (O): Removes the menu.
ZOOM: Enlarges video image.
MARKER: Marks any point during playback.
SEARCH: Displays MARKER SEARCH menu.
RANDOM: Plays tracks in random order.
DISPLAY: Accesses On-Screen display.
b B v V (left/right/up/down):
Selects an item in the menu.
ENTER: Confirms menu selection.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
(Continued)
Insert the battery (Lithium battery)
Button-type battery (Lithium battery)
1. Pinch the battery holder clip together then pull the tab to
remove the battery holder.
2. Insert the battery with the + facing in the same direction as the
+ on the battery holder.
3. Replace the battery holder with battery into the Remote Control
unit making sure that it is fully inserted.
NOTES
• Replace Remote Control unit battery with 3V micro lithium cells
such as CR. 2025 or its equivalent.
• Dispose of battery safely in accordance with local laws. Do not
dispose of in fire.
Warning: The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge, dis-
assemble, incinerate, or heat above 100 °C (212 °F).
Replace the battery with Matsushita Elec. Ind. Co., Ltd.
(Panasonic), part no. CR. 2025 only.
NOTES
• Do not expose the Remote Control sensor to bright light.
• Do not place obstacles between the Remote Control sensor and
the Remote Control.
Use of another battery may present a risk of fire or explo-
sion. Dispose of used batteries. Keep batteries away
from children. Do not disassemble or dispose of in fire.
V Replacing the button-type battery
The battery normally lasts for about a year. Replace the battery if
the Remote Control fails to operate the unit when used within the
operation range.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Connections
Caution
Connect the AC adapter.
• Do not connect the power plug to a power outlet other than that
indicated on the label, as this can result in a risk of fire or
electric shock.
• Do not connect or disconnect the power plug with wet hands.
Doing so may cause electric shock.
• Do not use an AC adapter other than one specified, as it can
cause a fire or damage to the player.
AC adapter
b
• This AC adapter operates on 100-120V~ 27W 50/60Hz.
• Contact an electrical parts distributor for assistance in selecting
a suitable AC plug adapter or AC cord set.
a
• Manufactured by WANLIDA Digital Technology Co., Ltd.
a Connect the AC Adapter to the DC IN
jack on the unit.
b Connect the AC adapter to the wall outlet.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Connections (Continued)
Connect the Automotive adapter
Caution
• To prevent electrical shock and possible damage to your unit or
vehicle, always unplug the automotive adapter from the cigarette
lighter socket before you remove the plug from your unit.
• A 3 amp. 250V fuse for protection is installed in the automotive
adapter.
This unit and its automotive adapter are designed for use in vehi-
cles that have 8.5-16 volt, negative ground electrical systems.
(This is standard for most vehicles.) If your vehicle has a different
type of electrical system, the DC power system cannot be used.
• While the engine is being started, disconnect the automotive
adapter from the car’s cigarette lighter socket.
•
Do not operate your unit when the car battery is discharged.
Peak current from the car generator may cause the DC fuse to
blow.
• If the vehicle’s supply voltage drops below approximately 10
volts, your unit may not work properly.
• Do not leave your unit in a place where the temperature
exceeds 70°C (158°F), or the pick-up device may be damaged.
Cigarette lighter socket
b
a
Examples include:
- Inside a car with the windows closed and in direct sunshine.
- Near a heating appliance.
Automotive adapter
• This automotive adapter operates on DC 8.5-16V.
• Contact an electrical parts distributor for assistance in selecting
a suitable automotive adapter.
a Connect the automotive adapter to the DC IN
jack on
• Manufactured by WANLIDA Digital Technology Co., Ltd.
the unit.
b Connect the automotive adapter to the car’s cigarette lighter
socket.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Connections (Continued)
Battery Pack
NOTES
• Do not detach the battery pack during playback.
• Be careful not to drop the battery pack.
Charge the battery pack before using it for the first time.
A Detaching the battery pack
a Press the PUSH knob.
A Attaching the battery pack
a Match the hooks of the battery pack into the holes on the
bottom of the player.
b Pull the battery pack until the hooks click.
b Press and slide the battery pack until the hooks click.
b
b
a
It balances the device so the unit
will not fall backwards when you
open the cover.
Turn it counterclockwise after
removing the batteries.
Hooks
a
ATTENTION
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At
the end of it’s useful life, under various state and local laws, it may be illegal to dispose of this bat-
tery into the municipal waste stream. Check with your local solid waste/officials for details in your
area for recycling options or proper disposal.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Connections (Continued)
A Charging the battery pack
A Recharging and play times
1. Attach the battery pack to the player.
2. Connect the AC power adapter to the player and
the plug into an AC outlet.
Recharging
Play time
without Playback
Approx.
Approx.
5.0 hours*
Player
Battery Pack
3.5 hour
* When Brightness control is set to initial mode.
- using the headphones and volume center.
Connect theAC
adapter cord
- The playing time may be different depending on the kinds of disc.
Charge indicator
Press “Display” to display the battery status on the screen.
A
3. During recharging, charge indicator is red. If recharging is
complete, charge indicator changes to green color.
CAUTION
Full
Low
Recharge
Take the following precautions to avoid liquid leakage,
overheating, etc.
• Do not use any unauthorized parts.
• Use the authorized AC adapter when recharging battery.
• Do not expose to high temperature above 60°C (140°F).
• Do not attempt to dismantle or modify the unit.
• Excessive impact may cause the unit to malfunction.
• Do not incinerate.
If using the AC adapter, battery display does not appear.
If the battery capacity is not enough, “Check Battery Status”
or “
” is displayed on the screen and then the power is
automatically turned off after a few minute.
• Do not disassemble; dispose of properly.
• Do not short-circuit.
A If play time dramatically reduces after recharging
The battery pack has reached the end of its service life (it can be
recharged about 300 times).
NOTE
A If the unit is not used for a long time
Charging a battery only happens when the power is off.
The battery will not be charged when it is naturally or purposely
discharged. Because the unit cannot perceive battery voltage,
even if you attached the battery.
• Detach the battery pack. (Even if the unit is off, it still uses some power.
This can lead to over discharging of the battery and malfunction.)
• Recharge the battery pack when you are ready to use it again.
When you are in this situation, power on the unit and then power
off again. Then battery charge will proceed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotating the LCD
After rotating LCD completely, you can fold the LCD screen as
shown above.
You can rotate LCD clockwise an angle of 180 degrees. However,
if you turn it by force, it can cause serious damage.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Disc
1. Prepare the power supply.
Select a MODE
2. Open the outer cover and press POWER button.
Selects a mode among DISC, AV IN or USB.
3. Press OPEN to open the disc lid and insert a disc with the side
1. Press MODE button on the unit.
you want to play label up. Close the disc lid by hand.
• If the disc is placed in upside down (and it is a single-sided disc),
“Check Disc” or “DISC ERROR” appears on the screen.
• After playing back all of the chapters in the title, the unit automatically
stops and returns to the menu screen.
The mode selection menu appears on the screen.
4. Press PLAY(N) to playback.
5. Adjust the volume.
2. Use b / B to select the mode then press ENTER.
NOTES
•
DISC: The disc menu or playback picture for the disc appears
on the screen .
• Place a disc with the playback side down on the spindle, and
push gently on the center of the disc so it goes into position.
• If you are not using the LCD on this unit, select OFF to conserve
power.
• The LCD is turned off if you close the unit.
• The picture shown on the LCD depends on the display mode
and the size recorded on the disc.
• AV IN: A picture from external device appears on the screen.
• USB: A file or folder list in USB Flash Drive appears on the
screen.
Changing the size of the picture
A
Use the LCD MODE button to change the picture mode.
The mode is shown on the unit’s display as follows.
NORMAL → 4:3 mode → OFF
NOTE
May appear to differ according to kind of disc.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
Displaying Disc Information on-screen
You can display various information about the disc loaded
on-screen.
Initial Settings
By using the Setup menu, you can make various adjustments to
items such as picture and sound. You can also set a language for
the subtitles and the Setup menu, among other things. For details
on each Setup menu item, see pages 20 to 24.
1. Press DISPLAY to show various
playback information. The items
displayed differ depending on the
disc type or playing status.
To display and exit the Menu:
Press SETUP to display the menu. A second press of SETUP will
take you back to initial screen.
To go to the next level:
Press B on the Remote Control.
2. You can select an item by pressing v / V and change or select
To go back to the previous level:
the setting by pressing b / B.
Press b on the Remote Control.
ꢀ Title (Track) – Current title (or track). number/total number of
titles (or tracks).
ꢀ Chapter – Current chapter number/total number of chapters.
ꢀ Time – Elapsed playing time.
General Operation
1. Press SETUP. The Setup menu appears.
ꢀ Audio – Selected audio language or channel.
ꢀ Subtitle – Selected subtitle.
ꢀ Angle – Selected angle/total number of angles.
2. Use v / V to select the desired option then press B to move to
the second level. The screen shows the current setting for the
selected item, as well as alternate setting(s).
3. Use v / V to select the second desired option then press B to
NOTE
move to the third level.
If no button is pressed for a few seconds, the on-screen display
disappears.
4. Use v / V to select the desired setting then press ENTER to
confirm your selection. Some items require additional steps.
5. Press SETUP or PLAY(N) to exit the Setup menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings
LANGUAGE
DISPLAY
TV Aspect
Menu Language
Select a language for the Setup menu and on-screen display.
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 TV is connected.
Disc Audio / Subtitle / Menu
NOTE
Select the language you prefer for the audio track (disc audio),
subtitles and the disc menu.
If the TV Aspect option is set to 16:9, the Display Mode setting is
automatically set to Widescreen.
Original: Refers to the original language in which the disc was
recorded.
Display Mode
Other: To select another language, press numeric buttons and
then ENTER to enter the corresponding 4-digit number accord-
ing to the language code list on the page 39. If you enter the
wrong language code, press CLEAR.
Display Mode setting works only when the TV Aspect mode is set
to “4:3”.
LetterBox: Displays a wide picture with bands on the upper
and lower portions of the screen.
Off (for Disc Subtitle) – Turn off Subtitle.
Panscan: Automatically displays the wide picture on the entire
screen and cuts off the portions that do not fit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings (Continued)
AUDIO
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz
signals, select 48 kHz. When this choice is made, this unit auto-
matically converts any 96 kHz signals to 48 kHz so your system
can decode them.
Each DVD disc has a variety of audio output options. Set the play-
er’s AUDIO options according to the type of audio system you use.
If your receiver or amplifier is capable of handling 96 kHz signals,
select 96 kHz. When this choice is made, this unit passes each
type of signal through without any further processing.
Check the documentation for your amplifier to verify its
capabilities.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s soundtrack in the
most accurate and realistic presentation possible, thanks to digital
audio technology. However, you may wish to compress the
dynamic range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows you to listen to
a movie at a lower volume without losing clarity of sound. Set
DRC to On for this effect.
Dolby Digital / DTS / MPEG
Bitstream: Select “Bitstream” if you connect the unit’s DIGITAL
OUT jack to an amplifier or other equipment with a Dolby
Digital, DTS or MPEG decoder.
PCM (for Dolby Digital / MPEG): Select when connected to a
two-channel digital stereo amplifier. DVDs encoded in Dolby
Digital or MPEG will be automatically downmixed to two-chan-
nel PCM audio.
Vocal
Set to On only when a multi-channel karaoke DVD is playing.
The karaoke channels on the disc mix into normal stereo sound.
Off (for DTS): If you select “Off”, the DTS signal is not output
through the DIGITAL OUT jack.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings (Continued)
LOCK (Parental Control)
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most restrictions and rating
eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active and the disc
plays in full.
NOTE
If you set a rating for the unit, all disc scenes with the same
rating or lower are played. Higher rated scenes are not played
unless an alternate scene is available on the disc. The alterna-
tive must have the same rating or a lower one. If no suitable
alternative is found, playback stops. You must enter the 4-digit
password or change the rating level in order to play the disc.
Rating
Blocks playback of rated DVDs based on their content. Not all
discs are rated.
1. Select “Rating” on the LOCK menu then press B.
4. Press ENTER to confirm your rating selection, then press
SETUP to exit the menu.
2. To access the Rating, Password and Area Code features, you
must input the 4-digit password you created. If you have not yet
entered a password you are prompted to do so.
Input a 4-digit code and press ENTER. Enter it again and press
ENTER to verify. If you make a mistake before pressing
ENTER, press CLEAR.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings (Continued)
Password
Area Code
You can enter or change password.
Enter the code of the area whose standards were used to rate the
DVD video disc, based on the list on page 40.
1. Select Password on the LOCK menu then press B.
1. Select “Area Code” on the LOCK menu then press B.
2. Follow step 2 as shown previous page (Rating).
3. Select the first character using v / V buttons.
2. To make a new password:
Press ENTER when the “New” option is highlighted. Enter a
new password using the numbered buttons then press ENTER.
Enter the password again to verify.
To change the password:
4. Press ENTER and select the second character using v / V
Press ENTER when the “Change” option is highlighted. Enter a
current password using the numbered buttons then press
ENTER. Enter a new password using the numbered buttons
then press ENTER. Enter the password again to verify.
buttons.
5. Press ENTER to confirm your area code selection.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the following
steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the password is cleared.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings (Continued)
OTHERS
The B.L.E settings can be changed.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your preference
and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
If a menu screen is displayed
DVD
ALL
Moving to another CHAPTER/TRACK
During playback, press SKIP/SEARCH (. or >) to go to the
next chapter/track or to return to the beginning of the current
chapter/track.
Use the b BvV buttons to select the title/chapter you want to view,
then press ENTER to start. Press TITLE or MENU to return to the
menu screen.
Press SKIP . twice briefly to step back to the previous
chapter/track.
NOTES
ALL
• If parental control is set and the disc is not within the rating settings
you must input the password.
Search
1. Press and hold SKIP/SEARCH (. or >) for about two
seconds during playback.
(See “LOCK Menu” on page 22-23.)
• DVDs may have a region code. Your unit does not play discs that
have a region code different from your unit.
The player will now go into SEARCH mode.
2. Press and hold SKIP/SEARCH (. or >) repeatedly to select
the required speed.
Unless stated otherwise, all operations described use the
Remote Control. Some features may also be available on the
Setup menu.
DVD disc: 4 steps
MP3, WMA, Audio CD: 3 steps
3. To exit SEARCH mode, press PLAY(N).
Resume Play ALL
Slow Motion DVD
When play is stopped, the unit records the point where STOP was
pressed (RESUME function).
Press PLAY(N) and play will resume from this point.
1. Press SLOW (t or T) during playback.
The player will enter Slow mode.
DVD disc: 4 steps
DVD
Moving to another TITLE
2. To exit slow motion mode, press PLAY(N).
When a disc has more than one title, you can move to another title.
Press DISPLAY during playback or resume play then the appropriate
number (0-9) or use b / B to move to another title.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features (Continued)
Still Picture and Frame-by-Frame Playback
Repeat ALL
ALL
During playback, press REPEAT repeatedly to select a desired
repeat mode.
During playback, press PAUSE/STEP(X) to pause playback.
DVD Video Discs: CHAPTER/TITLE/Off
DVD
Audio CD, MP3/WMA discs: TRACK/ALL/Off
Press PAUSE/STEP(X) repeatedly to play Frame-by-Frame.
( Remote Control Only )
To exit still motion mode, press PLAY(N).
NOTES
If you press SKIP (>) once during Repeat Chapter (Track) playback, the
repeat playback cancels.
Time Search DVD
Zoom DVD
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search box shows
the elapsed playing time.
During watching pictures, press ZOOM to enlarge the video image
(3 steps).
You can move through the zoomed picture using b B v V buttons.
Press CLEAR to exit.
2. Use v / V to select the time search box and “-:--:--” appears.
3. Input the required start time in hours, minutes, and seconds
from left to right. If you enter the wrong numbers, press
CLEAR to remove the numbers you entered. Then input the
correct numbers.
NOTES
Zoom may not work on some DVDs.
4. Press ENTER to confirm. Playback starts from the selected
time.
Repeat A-B DVD
ACD
During playback, each press of A-B button to select point A and
point B and repeats a sequence from point A (Starting point) to
point B (End point).
Press A-B again to cancel.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features (Continued)
Title Menu DVD
Subtitles DVD
If the current DVD title has a menu, the title menu appears on the
screen. Otherwise, the disc menu may appears.
Press SUBTITLE repeatedly during playback to see the different
subtitle languages.
Disc Menu DVD
Press MENU and the disc menu is displayed. Press MENU again
to exit.
Changing the Audio Language DVD
Press AUDIO repeatedly during playback to hear a different audio
language or encoding method.
With DVD-RW discs recorded in VR mode that have both a main
and a Bilingual audio channel, you can switch between Main (L),
Bilingual (R), or a mix of both (Main + Bilingual) by pressing
AUDIO.
Camera Angle DVD
During playback of DVD disc contains scenes recorded different
camera angles, press ANGLE repeatedly to select a desired angle.
TIP
The angle indicator will blink on the screen during scenes recorded at
different angles as an indication that angle switching is possible.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional features
Marker Search DVD
To enter a Marker
Last Scene Memory DVD
ACD
This unit memorizes the last scene from the last disc that is
viewed. The last scene remains in memory even if you remove the
disc from the unit or switch off the unit. If you load a disc that has
the scene memorized, the scene is automatically recalled.
You can start playback from up to nine memorized points. To enter
a marker, press MARKER at the desired point on the disc. The
Marker icon appears on the TV screen briefly. Repeat to enter up
to nine markers.
NOTES
This unit does not memorize the scene of a disc if you switch off
the unit before commencing to play the disc.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker search
menu appears on the screen.
Screen Saver/Auto Power Off
2. Within 9 seconds, press b / B to select a marker number that
The screen saver appears when you leave the unit in Stop mode
for about five minutes. If the Screen Saver is displayed for five
minutes, the unit automatically turns itself off.
you want to recall or clear.
3. Press ENTER and playback starts from the marked scene. Or,
Press CLEAR and the marker number is erased from the list.
4. You can play any marker by inputting its number on the marker
search menu.
NOTES
• Some subtitles recorded around the marker may fail to appear
(DVD).
• All the markers are cleared when the power is turned off or the
disc is removed.
• The marker is not stored when the DVD or title menu is
displayed on the screen.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA file
This unit can play Audio CDs or MP3/WMA files.
MP3 / WMA file compatibility with this unit is limited as
follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
MP3/ WMA/ Audio CD
Once you insert a MP3/WMA file or Audio CD, a menu appears on
the TV screen.
Press v / V to select a track/file then press PLAY(N) or ENTER
and playback starts. You can use variable playback functions.
Refer to page 25-26.
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
• The unit cannot read an MP3/WMA file that has a file extension
other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot create
a file system (eg. Direct-CD) it is impossible to playback MP3 /
WMA files. We recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
• File names should have a maximum of 16 letters and must incor-
porate an .mp3 or .wma extension.
ID3 TAG
• When playing a file containing information such as track titles,
you can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
• They should not contain special letters such as / ? * : “ < > l etc.
• The total number of files on the disc should be less than 650.
• This unit requires discs and recordings to meet certain technical
standards in order to achieve optimal playback quality. Pre-
recorded DVDs are automatically set to these standards. There
are many different types of recordable disc formats that require
certain pre-existing conditions (see above) to ensure compatible
playback.
• If there is no information, “NO ID3 TAG” appears on the display.
TIPS
• If you are in a file list on the MUSIC menu and want to return to
the Folder list, use the v / V to highlight
and press ENTER.
• Press MENU to move to the next page.
• On a CD with MP3/WMA and JPEG file, you can switch from the
MUSIC and PHOTO menu. Press TITLE and MUSIC and
PHOTO word on top of the menu is highlighted.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback
The program function enables you to store your favorite tracks
from any disc in the player memory.
A program can contain 30 tracks.
Repeat Programmed Tracks
Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO
CD or MUSIC menu appears.
E
2. Press PROG. The
mark will appear
NOTE
NOTE
If you press > once during Repeat Track playback, the repeat
playback cancels.
E
Press PROG. again, then the
Program Edit mode.
mark will disappear to exit the
Erasing a Track from Program List
E
1. Press PROG. and the
mark will appear
2. Use v V b B to select the track that you wish to erase from
the Program list.
3. Press CLEAR. Repeat step 1-3 to erase additional tracks on
the program list.
Audio CD Menu
MP3/WMA Menu
Erasing the Complete Program List
3. Select a track on the “List”, then press ENTER to place the
selected track on the “Program” list. Repeat to place additional
tracks on the list.
E
1. Press PROG. and the
mark will appear
2. Use v V b B to select “Clear All”, then press ENTER.
4. Press B.
NOTE
Select the track you want to start playing on the “Program” list.
The programs are also cleared when the power is off or the disc is
removed.
5. Press PLAY(N) or ENTER to start. Playback begins in the
order in which you programmed the tracks. Playback stops
after all of the tracks on the “Program” list have played once.
6. To resume normal playback from programmed playback, select
a track of AUDIO CD (or MUSIC) list and then press PLAY(N).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a JPEG file
This unit can play JPEG files.
TIPS
1. Insert a cd containing JPEG files. The PHOTO menu appears
on the TV screen.
• Press MENU to move to the next page.
• There are three Slide Speed options
>>> (Fast), >> (Normal) and > (Slow).
:
Use v V b B to highlight the
. Then, use b / B to select the
option you want to use.
• On a CD with MP3/WMA and JPEG file, you can switch from the
MUSIC and PHOTO menu. Press TITLE and MUSIC and
PHOTO word on top of the menu is highlighted.
• While watching a picture, press RETURN to hide the help menu.
2. Press v / V to select a folder, and press ENTER. A list of files
in the folder appears. If you are in a file list and want to return
to the previous Folder list, use the v / V buttons on the remote
Slide Show
Use v V b B to highlight the
(Slide Show) then press
to highlight
and press ENTER.
ENTER.
3. If you want to view a particular file, press v / V to highlight a
Still Picture
file and press ENTER or PLAY(N).
1. Press PAUSE/STEP(X) during slide show.
4. While viewing a file, you can press STOP(x) to move to the
The unit will now go into pause mode.
previous menu (PHOTO menu).
2. To return to the slide show, press PLAY(N) or press
PAUSE/STEP(X) again.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a JPEG file (Continued)
Moving to another file
JPEG disc compatibility with this unit is limited as
follows:
Press SKIP/SEARCH (. or >) or cursor (b or B) once while
• Depending upon the size and number of JPEG files, it could take a
long time for the unit to read the disc’s contents. If you don’t see an
on-screen display after several minutes, some of the files may be too
large — reduce the resolution of the JPEG files to less than 2M pixels
as 2760 x 2048 pixels and burn another disc.
viewing a picture to advance to the next or previous file.
Zoom
During viewing pictures, press ZOOM to enlarge the image
(3 steps).
You can move through the zoomed picture using b B v V
buttons. Press CLEAR to exit.
• The total number of files and folders on the disc should be less than
650.
• Some discs may be incompatible due to a different recording format or
the condition of disc.
To rotate picture
Press v / V while viewing a picture to rotate the picture clockwise
or counter clockwise.
• Ensure that all the selected files have the “.jpg” extensions when
copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions, please rename them as
“.jpg” file.
To listen to MP3/WMA music while viewing a picture
1. Insert the disc containing the two types of file in the unit.
2. Press TITLE to display PHOTO menu.
• File names without “.jpg” extension will not be able to be read by this
unit. Even though the files are shown as JPEG image files in Windows
Explorer.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
Playback starts.
5. While viewing a file, you can press STOP(x) to move to the
previous menu (PHOTO menu).
TIP
To listen to only the desired music while viewing a picture,
program the desired files from the “MUSIC” menu and then pro-
ceed as above.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
This unit will play DVD-RW discs recorded using the Video
Recording (VR) format.
1. Insert a disc and close the tray. The DVD-VR menu appears
on the screen.
2. Press v / V to select a track then press PLAY(N) or ENTER
and playback starts.
3. Press MENU to move to the list menu.
NOTES
• This unit will play DVD-R/RW disc that is recorded using the DVD-Video
format that have been finalized using a DVD-recorder. Unfinalized DVD-
R/RW discs cannot be played in this unit.
• Some DVD-VR disc are made with CPRM data by DVD RECORDER.
Player does not support these kinds of discs.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble system) only allowing
the recording of ‘copy once’ broadcast programs. CPRM stands for
Content Protection for Recordable Media.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an USB Flash Drive
This unit can play Audio CDs or MP3/WMA files.
NOTES
• Do not extract the USB Flash Drive during operation.
• Music files (MP3/WMA), image files (JPEG) files can be played.
• The total number of files in a USB Flash Drive should be less
than 650 files.
• Some USB Flash Drives are not supported on this unit.
• This unit can support USB1.1.
1. Connect the USB Flash Drive to the USB port on the unit after
power is on.
2. Press MODE on the unit.
The mode selection menu appears on the screen.
For details on each operation item,
refer to relevant page. (See pages 25-32)
3. Select the USB using b / B buttons and press ENTER.
The file or folder list in USB Flash Drive appears on the
screen.
4. If you want to change the other mode, select the other mode in
mode selection menu.
To Remove the USB Flash Drive from the unit
1. Follow step 4 as shown above, to exit the menu.
2. Remove the USB Flash Drive from the unit.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Player
The picture and sound of a nearby TV, VCR, or radio may be
distorted during playback. If this occurs, position the player away
from the TV, VCR, or radio, or turn off the unit after removing the
disc.
Rear of TV
AV output Connections
Depending on your TV and other equipment there are various
ways you can connect the unit. Please refer to the manuals of
your TV, stereo system or other devices as necessary for
additional connection information.
Audio/Video cable
(Supplied)
AV output Connections to Your TV
1. Set the Mode selection menu to “USB” or “ DISC” mode.
2. Connect the black end of supplied AV cable to the AV IN/OUT
jack on the unit.
3. Connect the yellow end of supplied AV cable to the VIDEO
Input jack on your TV.
4. Connect the red and white ends of supplied AV cable to the
AUDIO Input jacks on your TV.
Right side of unit
NOTE
Make sure the DVD player is connected directly to the TV and not
to a VCR, otherwise the DVD image could be distorted by the
copy protection system.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Player (Continued)
AV input Connections
AV input Connections to Your unit
1. Set the Mode selection menu to “AV IN” mode.
Connect the input jacks (Audio/Video) on the unit to the
audio/video out jacks on your external device, using audio/video
cables.
2. Connect the black end of supplied AV cable to the AV IN/OUT
jack on the unit.
3. Connect the yellow end of supplied AV cable to the VIDEO
Output jack on your external device.
External Device
4. Connect the red and white ends of supplied AV cable to the
AUDIO Output jacks on your external device.
NOTE
If the VIDEO IN signal is not connected in AV IN mode, this unit
will automatically power off in 10 minutes to prevent battery
discharge.
Audio/ Video cable
(Supplied)
Right side of unit
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the Player (Continued)
Amplifier equipped with 2-channel analog stereo or Dolby Pro
Logic ll / Pro Logic: Connect the AV IN/OUT jacks on the unit to
the audio left and right IN jacks on your amplifier, receiver, or
stereo system, using the audio cables.
Audio Connection to Optional Equipment
Connect the unit to your optional equipment for audio output.
You must set the Mode selection menu to “USB” or “ DISC” mode.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS): Connect one of the unit
Coaxial jack to the corresponding in jack on youramplifier. Use an
optional digital audio cable.
Amplifier(Receiver)
L
R
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality.
For this you need a multi-channel audio / video receiver that sup-
ports one or more of the audio formats supported by your unit
such as MPEG 2, Dolby Digital and DTS. Check the receiver man-
ual and the logos on the front of the receiver.
Audio/ Video
cable (Supplied)
and/or
Coaxial cable
(Not supplied)
NOTES
•
If the audio format of the digital output does not match the capabil-
ities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
• Six Channel Digital Surround Sound via a digital connection can
only be obtained if your receiver is equipped with a Digital Multi-
channel decoder.
• To see the audio format of the current DVD in the on-screen dis-
play, press AUDIO.
Right side of unit
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Cause
Correction
• Plug the power cord into the wall outlet securely.
• Recharge the battery.
No power.
• The power cord is disconnected.
• The battery is discharged.
No picture on the LCD
or TV (including video
from another unit).
• The video cable is not connected securely. • Connect the video cable into the jacks securely.
• The MODE selection is not set correctly.
• Set the MODE correctly.
While you are viewing video from other equipment,
set the MODE to A/V IN mode.
• LCD mode is set to OFF.
• Select a LCD mode other than OFF.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on the TV
so the picture from the unit appears on the screen.
• Select the correct input mode of the audio receiver
so you can listen to the sound from the unit.
•
The equipment connected with the audio cable
is not set to receive DVD signal output.
No sound.
• Connect the audio cable into the jacks securely.
• The audio cables are not connected
securely.
• Insert a playable disc. (Check the disc type and
Regional code.)
The unit does not start
playback.
• An unplayable disc is inserted.
• Cancel the Rating function or change the rating level.
• The Rating level is set.
• “
” may appear on the screen during operation.
No response when but-
tons are pressed.
• Some discs prohibit certain operations.
• Operate the Remote Control within about 23 ft
(7 m).
• The Remote Control is too far from the
unit.
The Remote Control
does not work properly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Herd and Mcdonald Islands HM
Hungary
India
Indonesia
Israel
Italy
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Thailand
Turkey
Uganda
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
PT
RO
El Salvador
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Liquid Crystal Display
Power supply:
DC 9.5V (AC adapter terminal), DC 7.4V (Battery)
Panel size: 8 inches wide (diagonal)
Projection system: R.G.B. stripe
Power consumption: 12W with battery
Driving system: TFT active matrix
Net Weight: 1.87 lbs (0.85 kg) (without battery pack)
Resolution: 800 x 480 x 3 (effective pixel rate: more than 99.99%)
External dimensions (W x D x H):
8.5 x 1.3 x 7.1 inches (216 x 181.3 x 33.2 mm)
Accessories
Signal system: NTSC
• RCA Audio/Video cable...........................................................1
Laser:
DVD Laser wavelength 662+25 / 662-15 nm
CD Laser wavelength 785+25 / 785-15 nm
• AC Adapter (DPAC1) ..............................................................1
• Automotive Adapter (DPDC1).................................................1
• Battery Pack (DPB28).............................................................1
• Remote control........................................................................1
• Battery for Remote control (Lithium Battery) ..........................1
Frequency range (audio):
DVD linear sound: 48kHz sampling 8 Hz to 20 kHz
96kHz sampling 8 Hz to 44 kHz
Signal-to-noise ratio (audio): More than 80 dB
Dynamic range (audio): More than 80 dB
Harmonic distortion (audio): 0.02 %
Design and specifications are subject to change without notice.
Operating conditions:
Temperature: 5°C to 35°C, Operation status: Horizontal
Connectors
Video input/output (VIDEO In/Out):
1.0 V (p-p), 75 Ω, negative sync., ø3.5mm mini jack x 1
Audio input/output (AUDIO In/Out, analog audio):
2.0 Vrms(1 KHz, 0 dB), ø3.5mm mini jack x 1
Earphone terminal: ø3.5mm stereo mini jack x 2
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under nor-
mal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer pur-
chase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States,
excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to return the unit
to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion of the origi-
nal warranty period.
Shipping both ways will be paid by LG during the first
90 days of the Warranty Period. During the remainder
of the Warranty Period (91~365 days), you pay inbound shipping
charges and LG pays return shipping charges.
Download from Www.Somanuals.com. All Manuals Search And Download.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIM-
ITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSE-
QUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAM-
AGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal
rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or
failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifi-
cations or contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other natural caus-
es, unauthorized modification or alteration, incorrect electrical current or voltage, signal reception or input, software not licensed
directly by LG, software errors that do not disable functionality, operating and software protocols adopted after the date of man-
ufacture or for outside the US, institutional or commercial use, or other causes not arising out of defect in material or workman-
ship.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For Warranty Service, Where to buy, Product Assistance, or
Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select
appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
P/N : MFL37883939
Printed in China
Issue O
Download from Www.Somanuals.com. All Manuals Search And Download.
|