LG Electronics DVD Player BD630C User Manual
OWNER’S MANUAL  
NETWORK BLU-RAY  
DISC™ / DVD PLAYER  
Please read this manual carefully before operating  
your set and retain it for future reference.  
BD630C  
P/NO : SAC35093503  
www.lg.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
3
Safety Information  
CAUTION  
CAUTION: This product employs a Laser System.  
To ensure proper use of this product, please read  
1
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
this owner’s manual carefully and retain it for future  
reference. Shall the unit require maintenance,  
contact an authorized service center.  
Use of controls, adjustments or the performance of  
procedures other than those specified herein may  
result in hazardous radiation exposure.  
To prevent direct exposure to laser beam, do not try  
to open the enclosure. Visible laser radiation when  
open. DO NOT STARE INTO BEAM.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK DO NOT REMOVE COVER (OR BACK) NO  
USER-SERVICEABLE PARTS INSIDE REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL.  
This lightning flash with arrowhead  
symbol within an equilateral triangle  
is intended to alert the user to the  
presence of uninsulated dangerous  
voltage within the product’s  
CAUTION concerning the Power Cord  
Most appliances recommend they be placed upon  
a dedicated circuit;  
enclosure that may be of sufficient magnitude to  
constitute a risk of electric shock to persons.  
That is, a single outlet circuit which powers only  
that appliance and has no additional outlets or  
branch circuits. Check the specification page of this  
owner’s manual to be certain. Do not overload wall  
outlets. Overloaded wall outlets, loose or damaged  
wall outlets, extension cords, frayed power cords, or  
damaged or cracked wire insulation are dangerous.  
Any of these conditions could result in electric  
shock or fire. Periodically examine the cord of your  
appliance, and if its appearance indicates damage  
or deterioration, unplug it, discontinue use of the  
appliance, and have the cord replaced with an  
exact replacement part by an authorized service  
center. Protect the power cord from physical or  
mechanical abuse, such as being twisted, kinked,  
pinched, closed in a door, or walked upon. Pay  
particular attention to plugs, wall outlets, and  
the point where the cord exits the appliance. To  
disconnect power from the mains, pull out the  
mains cord plug. When installing the product,  
ensure that the plug is easily accessible.  
The exclamation point within an  
equilateral triangle is intended  
to alert the user to the presence  
of important operating and  
maintenance (servicing)  
instructions in the literature accompanying the  
product.  
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK  
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN  
OR MOISTURE.  
WARNING: Do not install this equipment in a  
confined space such as a book case or similar unit.  
CAUTION: Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the  
product and to protect it from over heating. The  
openings shall be never be blocked by placing  
the product on a bed, sofa, rug or other similar  
surface. This product shall not be placed in a built-  
in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s  
instruction has been adhered to.  
•
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Getting Started  
This device is equipped with a portable battery or  
accumulator.  
Safety way to remove the battery or the  
battery from the equipment: Remove the  
old battery or battery pack, follow the steps  
in reverse order than the assembly. To prevent  
contamination of the environment and bring on  
possible threat to human and animal health, the  
old battery or the battery put it in the appropriate  
container at designated collection points. Do  
not dispose of batteries or battery together with  
other waste. It is recommended that you use  
local, free reimbursement systems batteries and  
accumulators. The battery shall not be exposed to  
excessive heat such as sunshine, fire or the like.  
1
CAUTION: The apparatus shall not be exposed to  
water (dripping or splashing) and no objects filled  
with liquids, such as vases, shall be placed on the  
apparatus.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
5
Notes on Copyrights  
IMPORTANT SAFETY  
INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
Because AACS (Advanced Access Content  
System) is approved as content protection  
system for BD format, similar to use of CSS  
(Content Scramble System) for DVD format,  
certain restrictions are imposed on playback,  
analog signal output, etc., of AACS protected  
contents. The operation of this product and  
restrictions on this product may vary depending  
on your time of purchase as those restrictions  
may be adopted and/or changed by AACS after  
the production of this product.  
y
1
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Furthermore, BD-ROM Mark and BD+ are  
additionally used as content protection systems  
for BD format, which imposes certain restrictions  
including playback restrictions for BD-ROM  
Mark and/or BD+ protected contents. To obtain  
additional information on AACS, BD-ROM  
Mark, BD+, or this product, please contact an  
authorized Customer Service Center.  
y
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
Many BD-ROM/DVD discs are encoded with  
copy protection. Because of this, you should only  
connect your player directly to your TV, not to a  
VCR. Connecting to a VCR results in a distorted  
picture from copy-protected discs.  
y
y
and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If  
the provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Rovi, and is intended for home and  
other limited viewing uses only unless otherwise  
authorized by Rovi. Reverse engineering or  
disassembly is prohibited.  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
11. Only use attachments/accessories specified by  
the manufacturer.  
Under the U.S. Copyright laws and Copyright  
laws of other countries, unauthorized recording,  
use, display, distribution, or revision of television  
programs, videotapes, BD-ROM discs, DVDs, CDs  
and other materials may subject you to civil and/  
or criminal liability.  
y
12. Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use  
caution when moving the cart/  
apparatus combination to avoid injury from tip-  
over.  
13. Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or  
moisture, does not operate normally, or has  
been dropped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Table of Contents  
23 – Adjust the Setup Settings  
23 – [DISPLAY] Menu  
24 – [LANGUAGE] Menu  
25 – [AUDIO] Menu  
Table of Contents  
26 – [LOCK] Menu  
27 – [NETWORK] Menu  
28 – [OTHERS] Menu  
1
Getting Started  
3
8
8
Safety Information  
Introduction  
– Playable Discs and symbols used in  
this manual  
4
Operating  
9
9
– About the “7” Symbol Display  
– Supplied Accessorries  
29 General Playback  
29 – Using [HOME] menu  
29 – Playing a Disc  
10 – File compatibility  
11  
– AVCHD (Advanced Video Codec High  
Definition)  
29 – Playing a file on a disc/USB device  
30 – Enjoying BD-LiveTM  
12 – Certain System Requirements  
12 – About Digital Multi-channel sound  
12 – Compatibility Notes  
30 – Basic operations for video and audio  
content  
31 – Basic operations for photo content  
31 – Using the disc menu  
31 – Resume playback  
12 – Regional Code  
13  
14  
14  
Remote control  
Front panel  
Rear panel  
32 Advanced Playback  
32 – Repeat Playback  
32 – Repeating a specific portion  
32 – Enlarge the playback image  
33 – Marker Search  
2
Connecting  
33 – Using the search menu  
34 – Changing content list view  
34 – Viewing content information  
34 – Selecting a subtitle file  
35 – Last Scene Memory  
35 – Options while viewing a photo  
36 – Listening to music while slide show  
36 On-Screen display  
15  
Connecting to Your TV  
15 – HDMI Connection  
16 – What is SIMPLINK?  
16 – Component Video Connection  
17  
17  
18 Connecting to an Amplifier  
18 – Connecting to an Amplifier via HDMI  
Output  
18 – Connecting to an Amplifier via Digital  
Audio Output  
19 – Connecting to an Amplifier via 2  
Channel Audio Output  
19  
– Video/Audio (Left/Right) Connection  
– Resolution Setting  
36 – Displaying content information on-  
screen  
37 – Playing from selected time  
37 – Hearing a different audio  
37 – Selecting a subtitle language  
37 – Watching from a different angle  
38 – Changing the TV Aspect Ratio  
38 – Changing the Picture Mode  
38 – Changing subtitle code page  
39 Audio CD Recording  
Connecting to your Home Network  
19 – Wired network connection  
20 – Wired Network Setup  
22 USB device connection  
22 – Playback content in the USB device  
40 Enjoying the NetCast™ Entertainment  
Access  
3
System Setting  
23 Settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
7
5
Troubleshooting  
41  
41  
Troubleshooting  
– General  
42 – Picture  
42 – Sound  
1
43 – Network  
43 – Customer Support  
43 – Open source software notice  
2
3
4
5
6
6
Appendix  
44 Controlling a TV with the Supplied  
Remote Control  
44 – Setting up the remote to control your  
TV  
45 Network Software Update  
45 – Network update notification  
45 – Software Update  
47 Area Code List  
48 Language Code List  
49 Trademarks and Licenses  
50 Audio Output Specifications  
52 Video Output Resolution  
53 Specifications  
54 Maintenance  
54 – Handling the Unit  
54 – Notes on Discs  
55 Important Information Relating to  
Network Services  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Getting Started  
Introduction  
1
Playable Discs and symbols used in this manual  
Media/Term  
Logo  
Symbol  
Description  
Discs such as movies that can be purchased or  
rented.  
y
e
BD-R/RE discs that are recorded in BDAV format.  
y
y
Blu-ray  
BD-R/RE discs that contain Movie, Music or  
Photo files.  
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format.  
y
y
Discs such as movies that can be purchased or  
rented.  
r
DVD-ROM  
DVD-R  
Video mode and finalized only  
Supports the dual layer disc also  
y
y
DVD-RW  
DVD+R  
Finalized AVCHD format  
o
DVD+RW  
DVD R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
(8 cm / 12  
cm disc)  
ISO 9660+JOLIET, UDF and UDF Bridge format.  
DVD-RW  
(VR)  
VR mode and finalized only  
Audio CD  
r
(8 cm / 12  
cm disc)  
Audio CD  
t
(8 cm / 12  
cm disc)  
CD-R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
CD-R/RW  
(8 cm / 12  
cm disc)  
ISO 9660+JOLIET, UDF and UDF Bridge format.  
Indicates special notes and operating features.  
Note  
–
–
,
>
Indicates cautions for preventing possible  
damages from abuse.  
Caution  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
9
Note  
,
About the “ ” Symbol Display  
7
Depending on the conditions of the  
recording equipment or the CD-R/RW (or  
DVD R/RW) disc itself, some CD-R/RW (or  
DVD R/RW) discs cannot be played on the  
unit.  
y
“7”may appear on your TV display during  
operation and indicates that the function explained  
in this owner’s manual is not available on that  
specific media.  
1
Depending on the recording software & the  
finalization, some recorded discs (CD-R/RW,  
DVD R/RW, BD-R/RE) may not be playable.  
y
y
Supplied Accessorries  
Audio / Video Cable (1) Remote control (1)  
Battery (1)  
BD-R/RE, DVD R/RW and CD-R/RW discs  
recorded using a personal computer or a  
DVD or CD Recorder may not play if the  
disc is damaged or dirty, or if there is dirt or  
condensation on the player’s lens.  
If you record a disc using a personal  
computer, even if it is recorded in a  
compatible format, there are cases in which  
it may not play because of the settings of  
the application software used to create the  
disc. (Check with the software publisher for  
more detailed information.)  
y
This player requires discs and recordings to  
meet certain technical standards in order to  
achieve optimal playback quality.  
y
y
Pre-recorded DVDs are automatically set to  
these standards. There are many different  
types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions  
to ensure compatible playback.  
Customers should note that permission  
is required in order to download MP3 /  
WMA files and music from the Internet.  
Our company has no right to grant such  
permission. Permission should always be  
sought from the copyright owner.  
y
y
You have to set the disc format option  
to [Mastered] in order to make the discs  
compatible with the LG players when  
formatting rewritable discs. When setting  
the option to Live System, you cannot use  
it on LG player. (Mastered/Live File System :  
Disc format system for windows Vista)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Getting Started  
File compatibility  
Movie files  
1
File  
Location  
File  
Extension  
Codec Format  
Audio Format  
Subtitle  
“.avi”, “.mpg”,  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
WMA, AAC,  
AC3  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), VobSub  
(.sub), SubViewer 1.0 (.sub),  
SubViewer 2.0 (.sub/.txt), TMPlayer  
(.txt), DVD Subtitle System (.txt)  
“.mpeg”, “.mkv”, DIVX5.xx, DIVX6.xx  
“.mp4”, “.asf”, (Standard playback  
“.wmv”, “.m4v” only) XVID, H.264/  
Disc,  
USB  
(DRM free)  
MPEG-4 AVC, MPEG1  
SS, MPEG2 PS, MPEG2  
TS  
Music files  
File  
Location  
File  
Extension  
Sampling Frequency  
Bitrate  
Note  
.“mp3”, “.wma”, within 32 - 48 kHz  
within 32- 192 kbps Some WAV files are  
“.wav”, “.m4a”  
(DRM free)  
(WMA),  
(wma),  
not supported on this  
Disc,  
USB  
within 11 - 48 kHz (MP3) within 8 - 320 kbps player.  
(MP3)  
Photo files  
File  
Location  
File  
Extension  
Recommanded  
Note  
Size  
“.jpg”, “.jpeg”,  
“.png”, “.gif”  
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless  
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files  
are not supported.  
Disc,  
USB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 11  
Note  
,
AVCHD (Advanced Video  
The file name is limited to 180 characters.  
y
y
Codec High Definition)  
A“avi“file which is encoded“WMV 9 codec”  
is not supported.  
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
y
1
Depending on the size and number of the  
files, it may take several minutes to read the  
contents on the media.  
y
The AVCHD format is a high definition digital  
video camera format.  
y
y
This unit cannot support the ID3 Tag  
embedded MP3 file.  
y
y
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
The total playback time of music file  
indicated on the screen may not correct for  
VBR files.  
This player can playback AVCHD discs using  
“x.v.Color”format.  
y
y
HD video files contained on the CD or USB  
1.0/1.1 may not played properly. Blu-ray  
disc, DVD or USB 2.0 are recommended to  
play back HD video files.  
y
y
y
Some AVCHD format discs may not play  
depending on the recording condition.  
AVCHD format discs need to be finalized.  
y
y
This player supports H.264/MPEG-4 AVC  
profile Main, High at Level 4.1. For a file  
with higher level, the warning message will  
appear on the screen.  
“x.v.Color”offers a wider color range than normal  
DVD camcorder discs.  
This player does not support files that are  
recorded with GMC 1 or Qpel  
.
2
*
*
*1 GMC – Global Motion Compensation  
*2 Qpel – Quarter pixel  
This player supports UTF-8 files even it  
contains Unicode subtitle contents. This  
player can not support the pure Unicode  
subtitle files.  
y
Depending on the types of file or ways of  
recording, it may not play back.  
y
y
A disc which was recorded by multi-session  
on normal PC is not supported on this  
player.  
To be playback a movie file, movie file name  
and Subtitle file name must be the same.  
y
y
If video codec is MPEG2 TS or MPEG2 PS,  
subtitle does not play back.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Getting Started  
Certain System Requirements  
Compatibility Notes  
For high definition video playback:  
Because BD-ROM is a new format, certain disc,  
digital connection and other compatibility issues  
are possible. If you experience compatibility  
problems, please contact an authorized  
Customer Service Center.  
y
High definition display that has COMPONENT or  
HDMI input jacks.  
y
1
BD-ROM disc with high definition content.  
y
y
HDMI or HDCP capable DVI input on your display  
device is required for some content (as specified  
by disc authors).  
This unit allows you to enjoy functions such  
as picture-in-picture, secondary audio and  
Virtual packages, etc., with BD-Video supporting  
BONUSVIEW (BD-ROM version 2 Profile 1 version  
1.1/ Final Standard Profile). Secondary video and  
audio can be played from a disc compatible with  
the picture-in-picture function. For the playback  
method, refer to the instructions in the disc.  
y
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD  
multi-channel audio playback:  
An amplifier/receiver with a built-in (Dolby  
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or  
DTS-HD) decoder.  
y
Viewing high-definition content and up-  
converting standard DVD content may require a  
HDMI-capable input or HDCP-capable DVI input  
on your display device.  
y
Main, center, surround speakers and subwoofer  
as necessary for chosen format.  
y
About Digital Multi-channel  
sound  
Some BD-ROM and DVD discs may restrict the  
use of some operation commands or features.  
y
y
A digital multi-channel connection provides the  
best sound quality. For this, you need a multi-  
channel Audio/Video Receiver that supports one  
or more of the audio formats supported by your  
player. Check the logos on the front of the Audio/  
Video receiver and the manual. (PCM Stereo, PCM  
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS and/or DTS-HD)  
Dolby TrueHD, Dolby Digital Plus and DTS-HD are  
supported with maximum 7.1 channels if you  
use HDMI connection for the audio output of the  
unit.  
You can use a USB device to store some disc  
related information, including downloaded on-  
line content. The disc you are using will control  
how long this information is retained.  
y
Regional Code  
This unit has a regional code printed on the rear of  
the unit. This unit can play only BD-ROM or DVD  
discs labeled same as the rear of the unit or“ALL”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 13  
Remote control  
• • • • • • a • • • • • •  
• • • • • • d • • • • •  
1
1(POWER): Switches the player ZOOM: Displays or exits the  
ON or OFF.  
[Zoom] menu.  
B(OPEN/CLOSE): Opens and  
closes the disc tray.  
MARKER: Marks any point during  
playback.  
* : The button is not available for  
any function.  
SEARCH: Displays or exits the  
search menu.  
TV Control Buttons: See page 44. TITLE/POP-UP: Displays the DVD  
title menu or BD-ROM’s pop-up  
menu, if available.  
0-9 numerical buttons: Selects  
numbered options in a menu or  
inputs letters in the keypad menu. Colored (R, G, Y, B) buttons:  
Use to navigate BD-ROM menus.  
They are also used for [MOVIE],  
[PHOTO], [MUSIC] and [NetCast].  
setting the password.  
CLEAR: Removes a mark on the  
search menu or a number when  
REPEAT (h): Repeats a desired  
section or sequence.  
• • • • • • b • • • • •  
c/v(SCAN): Searches  
backward or forward.  
C/V(SKIP): Goes to the  
next or previous chapter / track /  
file.  
Z(STOP): Stops playback.  
z(PLAY): Starts playback.  
M(PAUSE): Pauses playback.  
Battery Installation  
• • • • • • c • • • • •  
HOME (n): Displays or exits the  
[Home Menu].  
DISC MENU: Accesses menu on a  
disc.  
Direction buttons: Selects an  
option in the menu.  
Remove the battery cover on the  
rear of the Remote Control, and  
insert a R03 (size AAA) battery  
with 4and 5matched correctly.  
ENTER (b): Acknowledges menu  
selection.  
BACK(x): Exits the menu or  
resumes playback. The resume  
play function may not work  
depending on the BD-ROM disc.  
INFO/DISPLAY (m): Displays or  
exits On-Screen Display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Getting Started  
Front panel  
1
a Disc Tray  
e N(PLAY / PAUSE)  
f Z(STOP)  
b Display Window  
c Remote Sensor  
d B(OPEN/CLOSE)  
g 1(POWER) Button  
h USB Port  
Rear panel  
a AC power cord  
e HDMI OUT  
b VIDEO OUT  
f DIGITAL AUDIO OUT (COAXIAL)  
g LAN port  
c 2CH AUDIO OUT (Left/Right)  
d COMPONENT VIDEO OUT (Y PB PR)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 15  
HDMI Connection  
Connecting to Your TV  
Make one of the following connections, depending  
on the capabilities of your existing equipment.  
If you have a HDMI TV or monitor, you can connect  
it to this player using a HDMI cable (Type A, High  
Speed HDMITM Cable). Connect the HDMI jack on  
the player to the HDMI jack on a HDMI compatible  
TV or monitor.  
HDMI connection (page 15)  
y
y
y
Component Video connection (page 16)  
Video connection (page 17)  
Note  
,
Rear of the unit  
2
Depending on your TV and other  
equipment you wish to connect, there are  
various ways you could connect the player.  
Use only one of the connections described  
in this manual.  
y
Please refer to the manuals of your TV,  
Stereo System or other devices as necessary  
to make the best connections.  
y
y
y
Do not connect the player’s AUDIO OUT  
jack to the phono in jack (record player) of  
your audio system.  
HDMI  
cable  
TV  
Do not connect your player via your VCR.  
The image could be distorted by the copy  
protection system.  
Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
Additional Information for HDMI  
When you connect a HDMI or DVI compatible  
device make sure of the following:  
y
-
Try switching off the HDMI/DVI device and  
this player. Next, switch on the HDMI/DVI  
device and leave it for around 30 seconds,  
then switch on this player.  
-
-
The connected device’s video input is set  
correctly for this unit.  
The connected device is compatible with  
720x480p, 1280x720p, 1920x1080i or  
1920x1080p video input.  
Not all HDCP-compatible HDMI or DVI devices  
will work with this player.  
y
-
The picture will not be displayed properly  
with non-HDCP device.  
-
This player does not playback and TV screen  
is changed to black screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 Connecting  
Note  
,
Component Video Connection  
If a connected HDMI device does not accept  
y
Connect the COMPONENT VIDEO OUT jacks on the  
player to the corresponding input jacks on the TV  
using component video cable. Connect the left and  
right AUDIO OUT jacks of the player to the audio  
left and right IN jacks on the TV using the audio  
cables.  
the audio output of the player, the HDMI  
device’s audio sound may be distorted or  
may not output.  
When you use HDMI connection, you can  
change the resolution for the HDMI output.  
(Refer to“Resolution Setting”on page 17.)  
y
y
y
Select the type of video output from the  
HDMI OUT jack using [HDMI Color Setting]  
option on the [Setup] menu (see page 24).  
2
Rear of the  
unit  
Changing the resolution when the  
connection has already been established  
may result in malfunctions. To solve the  
problem, turn off the player and then turn it  
on again.  
When the HDMI connection with HDCP  
is not verified, TV screen is changed to  
black screen. In this case, check the HDMI  
connection, or disconnect the HDMI cable.  
y
y
If there are noises or lines on the screen,  
please check the HDMI cable (length is  
generally limited to 4.5 m(15 ft.)).  
Component  
video cable  
What is SIMPLINK?  
Audio  
cable  
Some functions of this unit are controlled by the  
TV’s remote control when this unit and LG TV’s with  
SIMPLINK are connected through HDMI connection.  
TV  
Controllable functions by LG TV’s remote control;  
Play, Pause, Scan, Skip, Stop, Power Off, etc.  
Refer to the TV owner’s manual for the details of  
SIMPLINK function.  
LG TV’s with SIMPLINK function has the logo as  
shown above.  
Note  
,
Note  
,
When you use COMPONENT VIDEO OUT  
connection, you can change the resolution for  
the output. (Refer to“Resolution setting”on  
page 17.)  
Depending on the disc type or playing status,  
some SIMPLINK operation may differ from your  
purpose or not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 17  
Video/Audio (Left/Right)  
Connection  
Connect the VIDEO OUT jack on the player to the  
video in jack on the TV using a video cable. Connect  
the left and right AUDIO OUT jacks of the player to  
the audio left and right IN jacks on the TV using the  
audio cables.  
Resolution Setting  
The player provides several output resolutions for  
HDMI OUT and COMPONENT VIDEO OUT jacks. You  
can change the resolution using [Setup] menu.  
1. Press HOME (n).  
2. Use a/dto select the [Setup] and press ENTER  
(b). The [Setup] menu appears.  
3. Use w/sto select [DISPLAY] option then press  
dto move to the second level.  
2
4. Use w/sto select the [Resolution] option then  
Rear of the unit  
press ENTER (b) to move to the third level.  
5. Use w/sto select the desired resolution then  
press ENTER (b) to confirm your selection.  
Note  
,
If your TV does not accept the resolution  
you have set on the player, you can set  
resolution to 480p as follows:  
y
Audio/ Video  
cable  
TV  
1. Press Bto open the disc tray.  
2
Press Z(STOP) for more than 5 seconds.  
Since several factors affect the resolution of  
video output, see“Video Output Resolution”  
on page 52.  
y
y
When you set the HDMI Resolution, over  
720p is not outputted to Composit Video.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 Connecting  
Connect the amplifier’s HDMI output jack to HDMI  
input jack on your TV using a HDMI cable if your  
amplifier has HDMI output jack.  
Connecting to an  
Amplifier  
Make one of the following connections, depending  
on the capabilities of your existing equipment.  
You will need to activate the player’s digital output.  
(See“[AUDIO] Menu”on pages 25.)  
Connecting to an Amplifier via  
Digital Audio Output  
Connect the player’s DIGITAL AUDIO OUT jack  
to the corresponding in jack (COAXIAL) on your  
amplifier using an optional digital audio cable.  
HDMI Audio connection (page 18)  
Digital Audio connection (page 18)  
2CH Analog Audio connection (page 19)  
y
y
y
2
Since many factors affect the type of audio output,  
see“Audio Output Specifications”for details (pages  
50).  
Rear of the unit  
Connecting to an Amplifier via  
HDMI Output  
Connect the player’s HDMI OUT jack to the  
corresponding in jack on your amplifier using a  
HDMI cable.  
Rear of the unit  
Coaxial  
cable  
HDMI cable  
Receiver/Amplifier  
Receiver/Amplifier  
HDMI  
You will need to activate the player’s digital output.  
(See“[AUDIO] Menu”on pages 25.)  
cable  
TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 19  
Connecting to an Amplifier via  
2 Channel Audio Output  
Connect the Left and Right 2CH AUDIO OUT jacks  
on the player to the audio left and right in jacks  
on your amplifier, receiver, or stereo system using  
audio cables.  
Connecting to your  
Home Network  
This player can be connected to a local area  
network (LAN) via the LAN port on the rear panel.  
By connecting the unit to a broadband home  
network, you have access to services such as  
software updates, BD-Live interactivity and on-line  
content services.  
2
Rear of the unit  
Wired network connection  
Using a wired network provides the best  
performance, because the attached devices  
connect directly to the network and are not subject  
to radio frequency interference.  
Please refer to the documentation for your network  
device for further instructions.  
Connect the player’s LAN port to the corresponding  
port on your Modem or Router using a  
commercially available LAN or Ethernet cable.  
(CAT5 or better with RJ45 connector).  
Audio cable  
Note  
,
When plugging or unplugging the LAN  
cable, hold the plug portion of the cable.  
When unplugging, do not pull on the LAN  
cable but unplug while pressing down on  
the lock.  
y
Do not connect a modular phone cable to  
the LAN port.  
y
y
Since there are various connection  
configurations, please follow the  
specifications of your telecommunication  
carrier or internet service provider.  
Receiver/Amplifier  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 Connecting  
Broadband  
service  
2. Select [Yes] and press ENTER (b) to continue.  
The new connection settings reset the current  
network settings.  
2
Router  
3. Use w/s/a/dto select the IP mode  
between [Dynamic] and [Static].  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
PC  
Note  
,
If there is no DHCP server on the network and  
you want to set the IP address manually, select  
[Static] then set [IP Address], [Subnet Mask],  
[Gateway] and [DNS Server] using w/s/  
a/dand numerical buttons. If you make a  
mistake while entering a number, press CLEAR  
to clear the highlighted part.  
Rear of the unit  
Wired Network Setup  
4. Select [OK] and press ENTER (b) to apply  
network settings.  
If there is a DHCP server on the local area network  
(LAN) via wired connection, this player will  
automatically be allocated an IP address. After  
making the physical connection, a small number of  
home networks may require the player’s network  
setting to be adjusted. Adjust the [NETWORK]  
setting as follow.  
5. The player will ask you to test the network  
connection. Select [OK] and press ENTER (b) to  
complete the network connection.  
6. If you select [Test] and press ENTER (b) at  
step 5 above, the network connection status is  
displayed on the screen.  
You can also test it on the [Connection Status]  
in the [Setup] menu.  
Preparation  
Before setting the wired network, you need to  
connect the broadband internet to your home  
network.  
1. Select [Connection Setting] option in the  
[Setup] menu then press ENTER (b).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 21  
A DSL modem is required to use DSL service and  
a cable modem is required to use cable modem  
service. Depending on the access method of and  
subscriber agreement with your ISP, you may not  
be able to use the internet connection feature  
contained in this player or you may be limited  
to the number of devices you can connect at  
the same time. (If your ISP limits subscription to  
one device, this player may not be allowed to  
connect when a PC is already connected.)  
y
Notes on Network Connection:  
Many network connection problems during  
set up can often be fixed by re-setting the  
router or modem. After connecting the player  
to the home network, quickly power off and/  
or disconnect the power cable of the home  
network router or cable modem. Then power on  
and/or connect the power cable again.  
y
Depending on the internet service provider (ISP),  
the number of devices that can receive internet  
service may be limited by the applicable terms  
of service. For details, contact your ISP.  
y
y
2
The use of a“Router”may not be allowed or its  
usage may be limited depending on the policies  
and restrictions of your ISP. For details, contact  
your ISP directly.  
y
Our company is not responsible for any  
malfunction of the player and/or the internet  
connection feature due to communication  
errors/malfunctions associated with your  
broadband internet connection, or other  
connected equipment.  
The features of BD-ROM discs made available  
through the Internet Connection feature are not  
created or provided by our company, and our  
company is not responsible for their functionality  
or continued availability. Some disc related  
material available by the Internet Connection  
may not be compatible with this player. If you  
have questions about such content, please  
contact the producer of the disc.  
y
Some internet contents may require a higher  
bandwidth connection.  
y
y
Even if the player is properly connected and  
configured, some internet contents may not  
operate properly because of internet congestion,  
the quality or bandwidth of your internet service,  
or problems at the provider of the content.  
Some internet connection operations may not  
be possible due to certain restrictions set by the  
Internet service provider (ISP) supplying your  
broadband Internet connection.  
y
Any fees charged by an ISP including, without  
limitation, connection charges are your  
responsibility.  
y
y
A 10 Base-T or 100 Base-TX LAN port is required  
for wired connection to this player. If your  
internet service does not allow for such a  
connection, you will not be able to connect the  
player.  
You must use a Router to use xDSL service.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Connecting  
Note  
,
USB device connection  
This player supports USB flash drive/  
external HDD formatted in FAT16, FAT32 and  
NTFS when accessing files (music, photo,  
movie). However, for BD-LIVE and Audio CD  
recording, only FAT16 and FAT32 formats  
are supported. Use the USB flash drive/  
external HDD formatted in either FAT16 or  
FAT32 when using BD-LIVE and Audio CD  
recording.  
y
This player can play movie, music and photo files  
contained in the USB device.  
Playback content in the USB  
device  
1. Insert a USB device to the USB port until it fits  
into place.  
2
The USB device can be used for the local  
storage for enjoying BD-LIVE discs with  
Internet.  
y
This unit can support up to 4 partitions of  
the USB device.  
y
y
y
Do not extract the USB device during  
operation (play, etc.).  
A USB device which requires additional  
program installation when you have  
connected it to a computer, is not  
supported.  
When you connect the USB device on the HOME  
menu, the player plays a music file contained in the  
USB storage device automatically. If the USB storage  
device is containing various types of files, a menu  
for the file type selection will appear.  
USB device: USB device that supports  
USB1.1 and USB2.0.  
y
y
Movie, music and photo files can be played.  
For details of operations on each file, refer  
to relevant pages.  
File loading may takes few minutes depending on  
the number of content stored in the USB storage  
device. Press ENTER (b) while [Cancel] is selected  
to stop loading.  
Regular back up is recommended to  
prevent data loss.  
y
y
If you use a USB extension cable, USB HUB  
or USB Multi-reader, the USB device may not  
be recognized.  
2. Press HOME (n).  
3. Select [Movie], [Photo] or [Music] using a/d,  
and press ENTER (b).  
Some USB device may not work with this  
unit.  
y
y
y
4. Select the [USB] option using w/s, and press  
ENTER (b).  
Digital camera and mobile phone are not  
supported.  
USB Port of the unit cannot be connected  
to PC. The unit cannot be used as a storage  
device.  
5. Select a file using w/s/a/d, and press PLAY  
or ENTER (b) to play the file.  
6. Withdraw the USB device carefully.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 23  
[DISPLAY] Menu  
Settings  
TV Aspect Ratio  
Select a TV aspect ratio option according to your TV  
type.  
Adjust the Setup Settings  
You can change the settings of the player in the  
[Setup] menu.  
[4:3 Letter Box]  
1. Press HOME (n).  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking bars  
above and below the picture.  
[4:3 Pan Scan]  
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV screen.  
Both sides of the picture are cut off.  
2. Use a/dto select the [Setup] and press ENTER  
3
(b). The [Setup] menu appears.  
[16:9 Original]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is displayed with an original 4:3  
aspect ratio, with black bars appearing at the  
left and right sides.  
[16:9 Full]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is adjusted horizontally (in a linear  
proportion) to fill the entire screen.  
3. Use w/sto select the first setup option, and  
press dto move to the second level.  
Note  
,
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is  
set to higher than 720p.  
4. Use w/sto select a second setup option, and  
press ENTER (b) to move to the third level.  
5. Use w/sto select a desired setting, and press  
ENTER (b) to confirm your selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 System Setting  
Resolution  
HDMI Color Setting  
Sets the output resolution of the Component and  
HDMI video signal. Refer to page 17 and 52 for  
details about the resolution setting.  
Select the type of output from the HDMI OUT jack.  
For this setting, please refer to the manuals of your  
display device.  
[Auto]  
[YCbCr]  
If the HDMI OUT jack is connected to  
Select when connecting to a HDMI display  
device.  
TVs providing display information (EDID),  
automatically selects the resolution best suited  
to the connected TV. If the COMPONENT  
VIDEO OUT is only connected, this changes the  
resolution to 480i as default resolution  
[RGB]  
Select when connecting to a DVI display  
device.  
[480i]  
[LANGUAGE] Menu  
Outputs 480 lines of interlaced video.  
3
[480p]  
Display Menu  
Select a language for the [Setup] menu and on-  
screen display.  
Outputs 480 lines of progressive video.  
[720p]  
Outputs 720 lines of progressive video.  
Disc Menu/Disc Audio/  
Disc Subtitle  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
[1080i]  
Outputs 1080 lines of interlaced video.  
[1080p]  
Outputs 1080 lines of progressive video.  
[Original]  
Refers to the original language in which the  
disc was recorded.  
1080p Display Mode  
When the resolution is set to 1080p, select  
[24 Hz] for smooth presentation of film material  
(1080p/24 Hz) with a HDMI-equipped display  
compatible with 1080p/24 Hz input.  
[Other]  
Press ENTER (b) to select another language.  
Use number buttons then press ENTER (b)  
to enter the corresponding 4-digit number  
according to the language code list on page  
48.  
Note  
,
When you select [24 Hz], you may  
experience some picture disturbance when  
the video switches video and film material.  
In this case, select [60 Hz].  
y
y
[Off] (Disc Subtitle only)  
Turn off Subtitle.  
Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with  
1080p/24 Hz, the actual frame frequency of  
the video output will be 60 Hz to match the  
video source format.  
Note  
,
Depending on the disc, your language setting  
may not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 25  
Sampling Freq.  
(Digital Audio Output)  
[AUDIO] Menu  
Each disc has a variety of audio output options. Set  
the player’s Audio options according to the type of  
audio system you use.  
[48 kHz]  
Select this if your A/V Receiver or Amplifier is  
not capable of handling 192 kHz and 96 kHz  
signal. When this choice is made, this unit  
automatically converts any 192 kHz and 96 kHz  
signals to 48 kHz so your system can decode  
them.  
Note  
,
Since many factors affect the type of audio  
output, see“Audio Output Specifications”on  
page 50 for details.  
[96 kHz]  
HDMI / Digital Output (SPDIF)  
Select this if your A/V Receiver or Amplifier is  
not capable of handling 192 kHz signals. When  
this choice is made, this unit  
automatically converts any 192 kHz signals to  
96 kHz so your system can decode them.  
[PCM Stereo]  
Select if you connect this unit’s HDMI OUT or  
DIGITAL AUDIO OUT jack to a device with two-  
channel digital stereo decoder.  
3
[PCM Multi-Ch] (HDMI only)  
[192 kHz]  
Select if you connect this unit’s HDMI OUT jack  
to a device with multi-channel digital decoder.  
Select this if your A/V Receiver or Amplifier is  
capable of handling 192 kHz signals.  
[DTS Re-Encode]  
Check the documentation for your A/V Receiver or  
Amplifier to verify its capabilities.  
Select if you connect this unit’s HDMI OUT or  
DIGITAL AUDIO OUT jack to a device with DTS  
decoder.  
DRC (Dynamic Range Control)  
This function allows you to listen to a movie at a  
lower volume without losing clarity of sound.  
[Primary Pass-Thru]  
Select if you connect this unit’s DIGITAL AUDIO  
OUT and HDMI OUT jack to a device with  
LPCM, Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS and DTS-HD decoder.  
[Auto]  
The dynamic range of the Dolby TrueHD audio  
output is specified by itself.  
And the dynamic range of the Dolby Digital  
and Dolby Digital Plus are operated as same as  
the [On] mode.  
Note  
,
When [HDMI] option is set to [PCM Multi-  
Ch], the audio may output as PCM Stereo  
if the PCM Multi-Ch information is not  
detected from HDMI device with EDID.  
y
y
[On]  
Compress the dynamic range of the Dolby  
Digital, Dolby Digital Plus or Dolby TrueHD  
audio output.  
If the [HDMI] or [Digital Output (SPDIF)]  
option is set to [DTS Re-Encode], the DTS  
Re-Encode audio is outputted for BD-ROM  
discs with secondary audio and the original  
audio is outputted for the other discs (like  
[Primary Pass-Thru]).  
[Off]  
Turns off this function.  
Note  
,
The DRC setting can be changed only when a  
disc is not inserted or the unit is in complete  
stop mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 System Setting  
DTS Neo:6  
[LOCK] Menu  
If the player is connected to the multi-channel  
Audio Receiver by HDMI connection, set this option  
to enjoy the multi-channel surround sound with  
the 2-channel audio source.  
The [LOCK] settings affect only CinemaNow movie,  
Blu-ray Disc and DVD playback.  
To access the any features in [LOCK] settings, you  
must enter the 4-digit security code you have  
created.  
If you have not entered a password yet, you are  
prompted to do so. Enter a 4-digit password twice,  
and press ENTER (b) to create a new password.  
[Off]  
Outputs the stereo sound via front speakers.  
[Music]  
Outputs the multi-channel sounds that are  
optimized for listening to music.  
Password  
You can create or change the password.  
[Cinema]  
[None]  
Outputs the multi-channel sounds that are  
optimized for watching movie.  
3
Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
Note  
,
[Change]  
This function is not available on an on-line  
service.  
y
y
Enter the current password and press ENTER  
(b). Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
Only the audio source with less than 48  
kHz sampling frequency is available for this  
function.  
If you forget your password  
This function is availabe only when [HDMI]  
option is set to [PCM Multi-Ch].  
y
If you forget your password, you can clear it using  
the following steps:  
1. Remove any disc that might be in the player.  
2. Select [Password] option in the [Setup] menu.  
3. Use Number buttons to enter“210499”. The  
password is cleared.  
Note  
,
If you make a mistake before pressing ENTER  
(b), press CLEAR. Then input the correct  
password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 27  
DVD Rating  
Blocks playback of rated DVD based on their  
content. (Not all discs are rated.)  
[NETWORK] Menu  
The [NETWORK] settings are needed to use the  
software update, BD-Live and NetCast features.  
[Rating 1-8]  
Connection Setting  
Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
If your home network environment is ready to  
connect the player, the player needs to be set the  
wired or wireless network connection for network  
communication. (See“Connecting to your Home  
Network”on pages 19-21.)  
[Unlock]  
If you select [Unlock], parental control is not  
active and the disc plays in full.  
Connection Status  
BD Rating  
Set an age limit of BD-ROM play. Use number  
buttons to input an age limit for BD-ROM viewing.  
If you want to check the network status on this  
player, select the [Connection Status] options and  
press ENTER (b) to check whether a connection  
to the network and the internet have been  
established.  
3
[255]  
All BD-ROM can be played.  
BD-LIVE connection  
[0-254]  
You can restrict Internet access when BD-Live  
functions are used.  
Prohibits play of BD-ROM with corresponding  
ratings recorded on them.  
[Permitted]  
Note  
,
The [BD Rating] will be applied only for the  
BD disc that containing the Advanced Rating  
Control.  
Internet access is permitted for all BD-Live  
contents.  
[Partially permitted]  
Internet access is permitted only for BD-  
Live contents which have content owner  
certificates. Internet access and AACS Online  
functions are prohibited for all BD-Live contents  
without a certificate.  
Area Code  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list  
on page 47.  
[Prohibited]  
Internet access is prohibited for all BD-Live  
contents.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 System Setting  
Netflix  
Auto Power Off  
The screen saver appears when you leave the player  
in Stop mode for about five minutes. If you set this  
option to [On], the unit automatically turns itself off  
after the Screen Saver is displayed for 20 minutes.  
Set this option to [Off] to leave the screen saver  
until the unit is operated by the user.  
[Netflix ESN]  
Display its unique Netflix ESN (Electronic Serial  
Number) that allows you to use the Netflix  
streaming.  
[Deactivate Netflix]  
Deactivates your player. To activate the Netflix  
again, contact to the service provider.  
Initialize  
[Factory Set]  
You can reset the player to its original factory  
settings.  
[OTHERS] Menu  
[BD Storage Clear]  
DivX® VOD  
3
Initializes the BD contents from the connected  
USB storage.  
ABOUT DIVX VIDEO: DivX® is a digital video format  
created by DivX, Inc. This is an official DivX Certified®  
device that plays DivX video. Visit divx.com for more  
information and software tools to convert your files  
into DivX video.  
Note  
,
If you reset the player to its original factory  
settings using [Factory Set] option, you have  
to set all the activation for the on-line services  
and network settings again.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified® device must be registered in order to play  
purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX  
VOD section in your device setup menu. Go to vod.  
divx.com for more information on how to complete  
your registration.  
Software  
[Information]  
Displays the current software version.  
[Register]  
[Update]  
Displays the registration code of your player.  
You can update the software by connecting  
the unit directly to the software update server  
(see page 45).  
[Deregister]  
Deactivate your player and display the  
deactivation code.  
Disclaimer Notice  
Press ENTER (b) to view the notice of Network  
Service Disclaimer on page 55.  
Note  
,
All the downloaded videos from DivX VOD  
with this player’s registration code can only be  
played back on this unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 29  
Note  
,
General Playback  
Playback functions described in this manual  
are not always available in every files and  
media. Some functions can be restricted  
depending on many factors.  
y
y
Using [HOME] menu  
The home menu appears when you press HOME  
(n). Use a/dto select a category and press  
ENTER (b).  
Depending on the BD-ROM titles, a USB  
device connection may be needed for the  
proper playback.  
Unfinalized DVD VR format discs may not be  
played in this player.  
y
y
Some DVD-VR discs are made with CPRM  
data by DVD RECORDER. This unit cannot  
support these kinds of discs.  
Playing a file on a disc/USB  
device  
yui  
This unit can play video, audio and photo files  
contained in the disc or USB device.  
4
a
b
c
d
e
[Movie] - Plays video contents.  
1. Insert a data disc on the tray or connect a USB  
device. ( When you insert the USB device, the  
USB option menu will be appeared to select for  
[Movie], [Photo] or [Music]. )  
[Photo] - Plays photo contents.  
[Music] - Plays audio contents.  
[NetCast] - Access to the NetCast Home.  
[Setup] - Adjusts the system settings.  
2. Select [Movie], [Photo] or [Music] using a/d,  
and press ENTER (b).  
3. Select [Data] or [USB] option using w/s, and  
Playing a Disc  
press ENTER (b).  
ert  
4. Select a file using w/s/a/d, and press  
z(PLAY) or ENTER (b) to play the file.  
1. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
2. Press B(OPEN/CLOSE) to close the disc tray.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts automatically.  
3. Press HOME (n).  
4. Select [Movie] or [Music] using a/d, and press  
ENTER (b).  
5. Select [BD],[DVD],[VR]or[Audio], option using  
w/s, and press ENTER (b).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 Operating  
Enjoying BD-LiveTM  
e
Basic operations for video and  
audio content  
BD-Video supporting BD-Live (BD-ROM version 2  
Profile 2) that has a network extension function  
allows you to enjoy more functions such as  
downloading new movie trailers by connecting this  
unit to the internet.  
To stop playback  
Press Z(STOP) while playback.  
To pause playback  
Press M(PAUSE) while playback.  
Press z(PLAY) to resume playback.  
1. Check the network connection and settings  
(pages 19-21).  
2. Insert a USB storage device to the USB port on  
the front panel.  
To play frame-by-frame (Video)  
Press M(PAUSE) while movie playback.  
Press M(PAUSE) repeatedly to play Frame-by-Frame  
playback.  
A USB storage device is needed to download  
bonus content.  
3. Press HOME (n), and set the [BD-LIVE  
connection] option on the [Setup] menu (page  
27).  
To scan forward or backward  
Press cor vto play fast forward or fast reverse  
during playback.  
Depending on a disc, the BD-Live function may  
not be operated if [BD-LIVE connection] option  
is set to [Partially Permitted].  
You can change the various playback speeds by  
pressing cor vrepeatedly.  
4
4. Insert a BD-ROM with BD-Live.  
The operations are differ depending on the disc.  
Refer to the manual supplied with the disc.  
To slow down the playing speed  
While the playback is paused, press vrepeatedly  
to play various speeds of slow motion.  
Caution  
>
Do not extract the connected USB device  
while content is being downloaded or a Blu-  
ray disc is still in the disc tray. Doing so may  
damage the connected USB device and BD-  
LIVE features may not operate properly with  
the damaged USB device anymore. If the  
connected USB device seems damaged from  
such an action, you can format the connected  
USB device from the PC and reuse it with this  
player.  
To skip to the next/previous  
chapter/track/file  
During playback, press Cor Vto go to the  
next chapter/track/file or to return to the beginning  
of the current chapter/track/file.  
Press Ctwice briefly to step back to the previous  
chapter/track/file.  
Note  
,
Some BD-Live contents may be restrictively  
accessed in some territories by contents  
provider’s own decision.  
y
y
It may take up to several minutes to load  
and start enjoying BD-Live contents.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 31  
Basic operations for photo  
content  
Resume playback  
eroyt  
u
The unit records the point where you pressed the  
Z(STOP) depending on the disc.  
To play a slide show  
Press z(PLAY) to start slide show.  
If“MZ(Resume Stop)”appears on the screen  
briefly, press z(PLAY) to resume playback (from  
the scene point).  
To stop a slide show  
Press Z(STOP) while slide show.  
If you press Z(STOP) twice or unload the disc,  
“Z(Complete Stop)”appears on the screen. The unit  
will clear the stopped point.  
To pause a slide show  
Press M(PAUSE) while slide show.  
Press z(PLAY) to re-start the slide show.  
Note  
,
The resume point may be cleared when a  
button is pressed (for example; 1(POWER),  
B(OPEN/CLOSE), etc).  
y
To skip to the next/previous photo  
While viewing a photo in full screen, press aor d  
to go to the previous or next photo.  
On BD-Video discs with BD-J, the resume  
playback function does not work.  
y
y
Note  
,
If you press Z(STOP) once during BD-ROM  
interactive title playback, the unit will be in  
Complete Stop mode .  
The file requirements are described on page  
.
4
10.  
Using the disc menu  
ero  
To display the disc menu  
The menu screen may be displayed first after  
loading a disc which contains a menu. If you want  
to display the disc menu while playback, press DISC  
MENU.  
Use w/s/a/dbuttons to navigate through  
menu items.  
To display the Pop-up menu  
Some BD-ROM discs contain Pop-up menu that  
appears while playback.  
Press TITLE/POP-UP while playback, and use w/s/  
a/dbuttons to navigate through menu items.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 Operating  
Repeating a specific portion  
eroty  
This player can repeat a portion you have selected.  
Advanced Playback  
Repeat Playback  
erotu  
y
During playback, press REPEAT (h) repeatedly to  
select a desired repeat mode.  
1. While playback, press REPEAT (h) to select  
[A-] at the beginning of the portion you wish to  
repeat.  
2. Press ENTER (b) at the end of the portion. Your  
selected portion will be repeated continually.  
3. To return to normal playback, press REPEAT  
Blu-ray discs/DVDs/ Movie  
(h) repeatedly to select [Off].  
jA- – Selected portion will be repeated continually.  
Note  
,
jChapter – The current chapter will be played  
back repeatedly.  
You cannot select a portion less than 3  
seconds.  
y
y
jTitle – The current title will be played back  
repeatedly.  
This function may not work on some disc or  
title.  
jAll - All the tracks or files will be played back  
repeatedly.  
Enlarge the playback image  
eroyi  
1. During playback or pause mode, press ZOOM to  
display the [Zoom] menu.  
4
To return to normal playback, press REPEAT (h)  
repeatedly to select [Off].  
Audio CDs/Audio files  
kA-B – Selected portion will be repeated  
continually. (Audio CD only)  
2. Use red (R) or green (G) colored button to zoom  
out or in the picture. You can move through the  
zoomed picture using w/s/a/dbuttons.  
;Track– The current track or file will be played  
back repeatedly.  
3. To return to the normal picture size, press yellow  
(Y) colored button.  
:All – All the tracks or files will be played back  
repeatedly.  
4. Press BACK (x) to exit the [Zoom] menu.  
l:All – All the tracks or files will be played  
back repeatedly in random order.  
Note  
,
l – The tracks or files will be played back in  
random order.  
On BD-Video discs with BD-J, zoom function  
does not work.  
To return to normal playback, press CLEAR.  
Note  
,
If you press Vonce during Repeat  
Chapter/Track playback, the repeat playback  
cancels.  
y
y
This function may not work on some disc or  
title.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 33  
Marker Search  
Using the search menu  
eroy  
You can start playback from up to nine memorized  
points.  
eroy  
Using search menu, you can easily to find the point  
where you want to start playback.  
To enter a marker  
To search a point  
1. While playback, press MARKER at the desired  
point. The Marker icon appears on the TV screen  
briefly.  
1. During playback, press SEARCH to display the  
search menu.  
2. Repeat step 1 to add up to nine markers.  
To recall a marked scene  
1. Press SEARCH and the search menu appears on  
the screen.  
2. Press a/dto skip the playback 15 seconds  
forward or backward. You can select a point that  
you want to skip by pressing and holding a/d  
button.  
2. Press a number button to select a marker  
number that you want to recall. Playback starts  
from the marked scene.  
To start playback from a marked  
scene  
1. Press SEARCH and the search menu appears on  
the screen.  
To delete a Marker  
1. Press SEARCH and the search menu appears on  
the screen.  
4
2. Press sto highlight a marker number. Use a/  
dto select a marked scene that you want to  
start playback.  
3. Press ENTER (b) to start playback from the  
marked scene.  
2. Press sto highlight a marker number.  
Use a/dto select a marked scene that you  
want to delete.  
Note  
,
This function may not work depending on  
discs, titles and file type.  
3. Press CLEAR and the marked scene is erased  
from the search menu.  
Note  
,
This function may not work depending on  
discs, titles, server ability.  
y
y
All marked points are cleared if the title  
is in complete stop (Z) mode, the title is  
changed or if you unload the disc.  
If the total length of the title is less than 10  
seconds, this function is not available.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 Operating  
Changing content list view  
Viewing content information  
yui  
On the [Movie], [Music] or [Photo] menu, you can  
change the content list view.  
y
The player can display the content information.  
1. Select a file using w/s/a/d.  
2. Press INFO/DISPLAY (m) to display the option  
Method 1  
Press red (R) colored button repeatedly.  
menu.  
3. Select the [Information] option using w/s, and  
press ENTER (b).  
The file information appears on the screen.  
While movie playback, you can display the file  
information by pressing TITLE/POP-UP.  
Note  
,
The information displayed on the screen  
may not correct comparing actual content  
information.  
Selecting a subtitle file  
4
y
If the subtitle file name is different from the movie  
file name, you need to select the subtitle file on the  
[Movie] menu before playing the movie.  
1. Use w/s/a/dto select the subtitle file you  
wish to play in the [Movie] menu.  
2. Press ENTER (b).  
Method 2  
Press ENTER (b) again to deselect the subtitle  
file. Selected subtitle file will be displayed when  
you play the movie file.  
1. On the content list, press INFO/DISPLAY (m) to  
display the option menu.  
Note  
2. Use w/sto select the [View Change] option.  
,
If you press Z(STOP) while playback, the  
y
y
3. Press ENTER (b) to change the content list  
subtitle selection is cancelled.  
view.  
This function is not available for playing file  
on a server via home network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 35  
Last Scene Memory  
Options while viewing a photo  
er  
i
This unit memorizes the last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the unit or switch  
off the unit. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
You can use various options during viewing a  
photo in full screen.  
1. While viewing a photo in full screen, press INFO/  
DISPLAY (m) to display the option menu.  
2. Select an option using w/s.  
Note  
,
Last Scene Memory function for a previous  
disc is erased once a different disc is played.  
y
y
y
y
This function may not work depending on  
the disc.  
On BD-Video discs with BD-J, the last scene  
memory function does not work.  
This unit does not memorize settings of  
a disc if you switch off the unit before  
commencing to play it.  
a Current photo/Total number of photos  
4
– Use a/dto view previous/next photo.  
b Slide Show – Press ENTER (b) to start or  
pause slide show.  
c Music Select – Select the background  
music for the slide show (page 36).  
d Music –Press ENTER (b) to start or pause  
background music.  
e Rotate – Press ENTER (b) to rotate the  
photo clockwise.  
f Zoom – Press ENTER (b) to display the  
[Zoom] menu.  
g Effect – Use a/dto select a transition  
effect between photos in a slide show.  
h Speed – Use a/dto select a delaying  
speed between photos in a slide show.  
3. Press BACK(x) to exit the option menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 Operating  
Listening to music while slide  
show  
On-Screen display  
You can display and adjust various information and  
settings about the content.  
i
You can display photo files while listening to audio  
files.  
Displaying content information  
on-screen  
1. While viewing a photo in full screen, press INFO/  
DISPLAY (m) to display the option menu.  
2. Use w/sto select [Music Select] option, and  
press ENTER (b) to display the [Music Select]  
menu.  
eroy  
1. While playback, press INFO/DISPLAY (m) to  
show various playback information.  
3. Use w/sto select a device, and press ENTER  
(b).  
4. Use w/sto select a file or a folder you wish to  
play.  
4
Select gand press ENTER (b) to display the  
upper directory.  
a Title – current title number/total number of  
titles  
Note  
,
b Chapter – current chapter number/total  
When selecting music file from a folder  
selection is not available. Only file selection is  
available.  
number of chapters  
c Time – elapsed playing time/total playback  
time  
5. Use dto select [OK], and press ENTER (b) to  
d Audio – selected audio language or channel  
complete music selection.  
e Subtitle – selected subtitle.  
f Angle – selected angle/total number of  
angles  
g TV Aspect Ratio – selected TV aspect Ratio  
h Picture Mode – selected picture mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 37  
2. Select an option using w/s.  
Hearing a different audio  
3. Use a/dto adjust the selected option value.  
4. Press BACK (x) to exit the On-Screen display.  
eroy  
1. During playback, press INFO/DISPLAY (m) to  
Note  
,
display the On-Screen display.  
If no button is pressed for a few seconds,  
the on-screen display disappears.  
y
y
y
y
2. Use w/sto select the [Audio] option.  
3. Use a/dto select desired audio language,  
A title number cannot be selected on some  
discs.  
audio track or audio channel.  
Note  
,
Available items may differ depending on  
discs or titles.  
Some discs allow you to change audio  
selections only via the disc menu. In this  
case, press TITLE/POP-UP or DISC MENU  
button and choose the appropriate audio  
from the selections on the disc menu.  
y
If BD interactive title is playing back, some  
setting information is displayed on the  
screen but prohibited to be changed.  
Immediately after you have switched sound,  
there may be a temporary discrepancy  
between the display and actual sound.  
y
y
Playing from selected time  
eroy  
1. Press INFO/DISPLAY (m) during playback. The  
time search box shows the elapsed playing  
time.  
On BD-ROM disc, the multi audio format  
(5.1CH or 7.1CH) is displayed with [MultiCH]  
in the on-screen display.  
4
2. Select the [Time] option and then input the  
required start time in hours, minutes, and  
seconds from left to right.  
Selecting a subtitle language  
eroy  
For example, to find a scene at 2 hours, 10  
minutes, and 20 seconds, enter“21020”.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
Press a/dto skip the playback 60 seconds  
2. Use w/sto select the [Subtitle] option.  
3. Use a/dto select desired subtitle language.  
4. Press BACK (x) to exit the On-Screen display.  
forward or backward.  
3. Press ENTER (b) to start playback from selected  
time.  
Note  
,
Note  
,
Some discs allow you to change subtitle  
selections only via the disc menu. If this is the  
case, press TITLE/POP-UP or DISC MENU button  
and choose the appropriate subtitle from the  
selections on the disc menu.  
This function may not work on some disc or  
titles.  
Watching from a different  
angle  
er  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use w/sto select the [Angle] option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 Operating  
3. Use a/dto select desired angle.  
4. Use w/s/a/dto adjust the [Picture Mode]  
options.  
4. Press BACK (x) to exit the On-Screen display.  
Select [Default] option then press ENTER (b) to  
reset the all video adjustments.  
Changing the TV Aspect Ratio  
eroy  
You can change the TV aspect ratio setting while  
playback.  
5. Use w/s/a/dto select the [Close] option,  
and press ENTER (b) to finish setting.  
Changing subtitle code page  
y
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
If the subtitle is displayed in broken letter, you can  
change the subtitle code page to view the subtitle  
file properly.  
2. Use w/sto select the [TV Aspect Ratio]  
option.  
3. Use a/dto select desired option.  
1. During playback, press INFO/DISPLAY (m) to  
4. Press BACK (x) to exit the On-Screen display.  
display the playback menu.  
Note  
,
2. Use w/sto select the [Code Page] option.  
Even if you change the value of the [TV Aspect  
Ratio] option in On-Screen display, the [TV  
Aspect Ratio] option in the [Setup] menu is  
not changed.  
3. Use a/dto select desired code option.  
4
Changing the Picture Mode  
eroy  
You can change the [Picture mode] option while  
playback.  
4. Press BACK (x) to exit the On-Screen display.  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use w/sto select the [Picture Mode] option.  
3. Use a/dto select desired option.  
4. Press BACK (x) to exit the On-Screen display.  
Setting the [User] option  
1. During playback, press INFO/DISPLAY (m) to  
display the On-Screen display.  
2. Use w/sto select the [Picture Mode] option.  
3. Use a/dto select the [User setting] option,  
and press ENTER (b).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 39  
8. Use w/s/a/dto select [OK], and press  
Audio CD Recording  
You can record one desired track or all of the tracks  
in Audio CD to a USB storage device.  
ENTER (b) to start Audio CD recording.  
If you want to stop in progressing Audio CD  
recording, press ENTER (b) while [Cancel] is  
highlighted.  
1. Insert a USB storage device to the USB port on  
the front panel.  
9. A message appears when Audio CD recording is  
completed. Press ENTER (b) to check the music  
file created in the destination folder.  
2. Press B(OPEN/CLOSE), and place an Audio CD  
on the disc tray.  
Note  
,
Press B(OPEN/CLOSE) to close the disc tray.  
The playback starts automatically.  
The table below shows the average  
recording time from an audio track with  
4 minutes of playback time to a music file  
with 192 kbps as an example.  
y
3. Press INFO/DISPLAY (m) to display the option  
menu.  
4. Use w/sto select [CD Recording] option, and  
stop mode  
1 min.  
while playback  
4 min.  
press ENTER (b).  
5. Use w/sto select a track you wish to copy on  
the menu, and press ENTER (b).  
Recording times in the table above are  
approximate.  
y
y
Repeat this step to select tracks as many as you  
can.  
Actual recording time for USB storage  
device varies depending on the USB storage  
device’s ability.  
4
Selects all the tracks on an  
Audio CD.  
Make sure that there is minimum of 50 MB  
free space is needed when recording into  
the USB storage device.  
y
Selects an encoding option  
from the pop-up menu  
(128kbps, 192kbps, 320kbps).  
The length of the music should be longer  
than 20 seconds for the proper recording.  
y
y
Cancels the recording and  
returns to the previous screen.  
Do not turn off this player or extract the  
connected USB storage device during Audio  
CD recording.  
6. Use w/s/a/dto select [Start], and press  
ENTER (b).  
Caution  
>
7. Use w/s/a/dto select a destination folder  
The recording or copying features on  
this player are provided for your personel  
and noncommercial use. The making of  
unauthorized copies of copy-protected  
material, including computer programs, files,  
broadcasts and sound recordings, may be an  
infringement of copyrights and constitute a  
criminal offense. This equipment should not be  
used for such purposes. LG expressly disclaims  
any responsibility for illegal distribution or  
use of unauthorized content in commercial  
purpose.  
to be copied.  
If you want to create a new folder, use  
w/s/a/dto select [New Folder] and press  
ENTER (b).  
Be Responsible  
Respect Copyrights  
Enter a folder name using virtual keyboard, and  
press ENTER (b) while [OK] is selected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 Operating  
Enjoying the NetCast™  
Entertainment Access  
You can use various content services via Internet  
with the NetCast Entertainment Access feature.  
1. Check the network connection and settings  
(pages 19-21).  
2. Press HOME (n).  
3. Select the [NetCast] using a/d, and press  
ENTER (b).  
4. Select an option using a/d, and press ENTER  
(b).  
4
Note  
,
Detailed information of each service,  
contact to the content provider or visit  
support link of the service.  
y
y
The content of NetCast services and service  
related information, including user interface,  
is subject to changes. Please refer to the  
web site of each service for most up-to-date  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting 41  
Troubleshooting  
General  
Symptom  
Cause & Solution  
The Power does not turned on.  
Plug the power cord into the wall outlet securely.  
y
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, colour system, and  
regional code.)  
y
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
y
y
y
y
Cancel the Rating function or change the rating level.  
The angle cannot be changed.  
Multi-angles are not recorded on the DVD Video being played.  
y
Cannot play movie, photo or  
music files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the movie file.  
y
y
The remote control does not  
work properly.  
The remote control is not pointed at the remote sensor of the unit.  
The remote control is too far from the unit.  
y
y
y
y
There is an obstacle in the path of the remote control and the unit.  
The batteries in the remote control are exhausted.  
5
The unit is plugged in, but the You can reset the unit as follows.  
power will not turn on or off.  
Unplug the power cord, wait at least five seconds, and then plug it in  
y
again.  
The unit is not operating  
normally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 Troubleshooting  
Picture  
Symptom  
Cause & Solution  
There is no picture.  
Select the appropriate video input mode on the TV so the picture  
from the unit appears on the TV screen.  
y
Connect the video connection securely.  
y
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the  
appropriate item that conforms to your video connection.  
Your TV may not suppot the resolution you have set on the player.  
Change the resolution that your TV accepts.  
y
y
The player’s HDMI OUT jack is connected to a DVI device that does  
not support copyright protection.  
Picture noise appears  
You are playing a disc recorded in a colour system that is different  
from your TV.  
y
y
Set the resolution which your TV accepts.  
Sound  
Symptom  
Cause & Solution  
There is no sound or the sound  
is distorted.  
Connect the audio connection securely.  
y
y
5
The input source setting on the amplifier or the connection to the  
amplifier is incorrect.  
The unit is in scan, slow motion, or pause mode.  
The sound volume is low.  
y
y
y
Check that the connected amplifier is compatible with audio format  
output from the player.  
The player’s HDMI OUT jack is connected to a DVI device. The DVI jack  
does not accept audio signal.  
y
y
Check the device connected to player’s HDMI OUT jack is compatible  
with audio format output from the player.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting 43  
Network  
Symptom  
Cause & Solution  
BD-Live feature does not  
work.  
The connected USB storage may not have enough space. Connect  
the USB storage with at least 1GB free space.  
y
y
y
Ensure that the unit is correctly connected to the local area network  
and can access the internet (see pages 19-21).  
Your broadband speed may not fast enough to use the BD-LIVE  
features. Contact your Internet Service Provider (ISP) and increase the  
broadband speed is recommended.  
The [BD-LIVE connection] option in the [Setup] menu is set to  
[Prohibited]. Set the option to [Permitted].  
y
y
Streaming video services (such  
as YouTube™, etc.) are often  
stopped or“buffer”during  
playback.  
Your broadband service speed may not be fast enough to stream  
video services. Contact your Internet Service Provider (ISP) and  
increase the broadband speed is recommended.  
Customer Support  
You can update the Player using the latest software to enhance the products operation and/or add new  
features. To obtain the latest software for this player (if updates have been made),  
please visit http://lgservice.com or contact LG Electronics customer care center.  
Open source software notice  
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit  
http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are  
available to download with the source code.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
44 Appendix  
Setting up the remote to  
control your TV  
Controlling a TV with  
the Supplied Remote  
Control  
You can operate your TV with the supplied remote  
control.  
If your TV is listed in the table below, set the  
appropriate manufacturer code.  
You can control your TV using the buttons below.  
1. While holding down 1(TV POWER) button,  
and press the manufacturer code for your  
TV with the numerical buttons (see the table  
below).  
Manufacturer  
LG  
Code Number  
1(Default), 2  
Zenith  
1, 3, 4  
1, 2  
6, 7  
8, 9  
4
GoldStar  
Samsung  
Sony  
By pressing  
You can  
Hitachi  
1(TV POWER)  
Turn the TV on or off.  
2. Release the 1(TV POWER) button to complete  
Switch the TV’s input source  
between the TV and other  
input sources.  
setting.  
AV/INPUT  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code. When you replace the batteries  
of the remote, the code number you have set may  
be reset to the default setting. Set the appropriate  
code number again.  
Scan up or down through  
memorized channels.  
PR/CH +/–  
VOL +/–  
Adjust the volume of the TV  
6
Turn the TV’s volume on  
or off.  
TV MUTE  
Note  
,
Depending on the unit being connected, you  
may not be able to control your TV using some  
of the buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 45  
Software Update  
Network Software  
Update  
You can update the player using the latest software  
to enhance the products operation and/or add  
new features. You can update the software by  
connecting the unit directly to the software update  
server.  
Network update notification  
Note  
,
From time to time, performance improvements  
and/or additional features or services may be  
made available to units that are connected to a  
broadband home network. If there is new software  
available and the unit is connected to a broadband  
home network, the player will inform you about the  
update as follows.  
Before updating the software in your player,  
remove any disc and USB Device from the  
player.  
y
Before updating the software in your player,  
turn the player off and then turn it back on.  
y
y
During the software update procedure,  
do not turn off the player or disconnect  
AC power, or do not press any button.  
Option 1:  
1. The update menu will appear on the screen  
when you turn on the player.  
If you cancel the update, turn off the power  
and turn it on for stable performance.  
y
y
2. Use a/dto select a desired option and then  
This unit cannot be updated to previous  
software version.  
press ENTER (b).  
1. Check the network connection and settings  
(page 19-21).  
2. Select [Software] option in the [Setup] menu  
then press ENTER (b).  
3. Select [Update] option, and press ENTER (b).  
[OK]  
Starts the software update.  
6
[Cancel]  
Exits the update menu and  
displays it next booting.  
[Hide]  
Exits the update menu and  
it does not appear until next  
software is uploaded in the  
update server.  
The player will check for the newest update.  
Note  
,
Pressing ENTER (b) while checking for the  
y
y
Option 2:  
update will end the process.  
If the software update is available from the update  
server, the“Update”icon appears at the bottom of  
the Home menu. Press blue (B) colored button to  
start the update procedure.  
If there is no update available, the Message,  
“No update is found.”appears. Press ENTER  
(b) to return to the [Home Menu].  
4. If newer version exists, the message“A new  
update was found. Do you want to download  
it?”appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 Appendix  
5. Select [OK] to download the update. (Selecting  
[Cancel] will end the update.)  
6. The player starts downloading the newest  
update from the server. (Downloading will  
takes several minutes depending on your home  
network condition)  
7. When downloading is completed, the message,  
“Download is complete. Do you want to  
update?”appears.  
8. Select [OK] to start updating.  
(Selecting [Cancel] will end the update and  
downloaded file will not be re-usable. To update  
software the next time, the software update  
procedure has to be started from the beginning  
again.)  
Caution  
>
Do not turn off the power during the software  
update.  
Note  
,
If the software includes the driver update, disc  
tray may open during the process.  
9. When update is completed, the power will be  
turned automatically in a few seconds.  
10. Turn the power back on. The system now  
operates with the new version.  
Note  
,
The Software Update function may not  
work properly depending on your internet  
environment. In this case, you can obtain  
the latest software from the authorized LG  
Electronics Service Center then update your  
player. Refer to“Customer Support”on page  
43.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 47  
Area Code List  
Choose an area code from this list.  
Area  
Code Area  
AF Fiji  
Code Area  
FJ Monaco  
Code Area  
Code  
MC  
MN  
MA  
NP  
NL  
AN  
NZ  
NG  
NO  
OM  
PK  
Singapore  
Slovak Republic  
SG  
Afghanistan  
Argentina  
Australia  
Austria  
FI Mongolia  
FR Morocco  
DE Nepal  
SK  
SI  
AR Finland  
AU France  
AT Germany  
BE Great Britain  
BT Greece  
BO Greenland  
BR Hong Kong  
KH Hungary  
CA India  
Slovenia  
South Africa  
South Korea  
Spain  
ZA  
KR  
Belgium  
Bhutan  
GB Netherlands  
GR Antilles  
GL New Zealand  
HK Nigeria  
HU Norway  
IN Oman  
ES  
Sri Lanka  
Sweden  
LK  
Bolivia  
SE  
Brazil  
Switzerland  
Taiwan  
CH  
TW  
TH  
TR  
Cambodia  
Canada  
Chile  
ID Pakistan  
IL Panama  
Thailand  
Turkey  
CL Indonesia  
CN Israel  
China  
PA  
IT Paraguay  
JM Philippines  
JP Poland  
PY  
Uganda  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Colombia  
Congo  
CO Italy  
PH  
PL  
Ukraine  
CG Jamaica  
CR Japan  
United States  
Uruguay  
Uzbekistan  
Vietnam  
Costa Rica  
Croatia  
HR Kenya  
KE Portugal  
KW Romania  
LY Russian  
PT  
Czech Republic  
Denmark  
Ecuador  
Egypt  
CZ Kuwait  
DK Libya  
RO  
Federation  
RU  
SA  
SN  
LU  
Zimbabwe  
EC Luxembourg  
EG Malaysia  
SV Maldives  
ET Mexico  
Saudi Arabia  
MY  
Senegal  
6
El Salvador  
Ethiopia  
MV  
MX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48 Appendix  
Language Code List  
Use this list to input your desired language for the following initial settings: [Disc Audio],  
[Disc Subtitle] and [Disc Menu].  
Language  
Afar  
Code Language  
6565 French  
6570 Frisian  
Code Language  
7082 Lithuanian  
7089 Macedonian  
7176 Malagasy  
7565 Malay  
Code Language  
7684 Sindhi  
7775 Singhalese  
7771 Slovak  
7783 Slovenian  
7776 Spanish  
7773 Sudanese  
7782 Swahili  
7779 Swedish  
7778 Tagalog  
7865 Tajik  
Code  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Afrikaans  
Albanian  
Ameharic  
Arabic  
8381 Galician  
6577 Georgian  
6582 German  
7289 Greek  
6869 Malayalam  
6976 Maori  
Armenian  
Assamese  
Aymara  
6583 Greenlandic  
6588 Guarani  
6590 Gujarati  
6665 Hausa  
7576 Marathi  
7178 Moldavian  
7185 Mongolian  
7265 Nauru  
Azerbaijani  
Bashkir  
Basque  
6985 Hebrew  
6678 Hindi  
7387 Nepali  
7869 Tamil  
Bengali; Bangla  
Bhutani  
Bihari  
7273 Norwegian  
7285 Oriya  
7879 Telugu  
7982 Thai  
6890 Hungarian  
6672 Icelandic  
6682 Indonesian  
6671 Interlingua  
7789 Irish  
7383 Panjabi  
8065 Tonga  
8083 Turkish  
7065 Turkmen  
8076 Twi  
Breton  
7378 Pashto, Pushto  
7365 Persian  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Croatian  
Czech  
7165 Polish  
6669 Italian  
7384 Portuguese  
7465 Quechua  
8084 Ukrainian  
8185 Urdu  
9072 Japanese  
7282 Kannada  
6783 Kashmiri  
6865 Kazakh  
7876 Kirghiz  
7578 Rhaeto-Romance 8277 Uzbek  
6
7583 Rumanian  
7575 Russian  
7589 Samoan  
7579 Sanskrit  
7585 Scots Gaelic  
7679 Serbian  
7665 Serbo-Croatian  
7686 Shona  
8279 Vietnamese  
Danish  
8285 Volapük  
8377 Welsh  
8365 Wolof  
7168 Xhosa  
8382 Yiddish  
8372 Yoruba  
8378 Zulu  
Dutch  
Korean  
English  
6978  
6979  
6984  
7079  
7074  
7073  
Kurdish  
Esperanto  
Estonian  
Faroese  
Fiji  
Laothian  
Latin  
Latvian, Lettish  
Lingala  
7678  
Finnish  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 49  
Trademarks and  
Licenses  
Manufactured under license under U.S. Patent  
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;  
6,226,616; 6,487,535; 7,212,872; 7,333,929;  
7,392,195; 7,272,567 & other U.S. and worldwide  
patents issued & pending. DTS and the symbol  
are registered trademarks, & DTS-HD, DTS-HD  
Master Audio, and the DTS logos are trademarks  
of DTS, Inc. Product includes software. © DTS, Inc.  
All Rights Reserved.  
Blu-ray Disc™, Blu-ray™, BD-Live™, BONUSVIEW™  
and the logos are trademarks of the Blu-ray Disc  
Association.  
“DVD Logo”is a trademark of DVD Format/Logo  
Licensing Corporation.  
Java and all Java-based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the United States and other  
countries.  
“AVCHD”and the“AVCHD”logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI licensing LLC.  
DivX®, DivX Certified® and associated logos  
are trademark of DivX, Inc., and are used under  
license.  
6
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50 Appendix  
Audio Output Specifications  
3
Jack/Setting  
Digital Output (SPDIF) (DIGITAL AUDIO OUT)  
*
Analog  
Source  
2CH Output  
4
Primary Pass-Thru  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DTS  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS Re-encode  
*
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS  
DTS  
DTS (2 ch)  
DTS  
DTS-HD  
DTS  
DTS  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
DTS  
PCM 2ch  
DTS  
PCM 2ch  
DTS  
PCM 2ch  
Jack/Setting  
Source  
HDMI OUT  
1
2
4
Primary Pass-Thru  
* *  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM Multi-Ch  
PCM 2ch  
DTS Re-encode  
*
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS  
DTS  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
PCM 2ch  
DTS (2 ch)  
DTS  
PCM 5.1ch  
PCM 7.1ch  
PCM 2ch  
DTS-HD  
DTS  
DTS-HD  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
DTS  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 5.1ch  
PCM 7.1ch  
DTS  
DTS  
6
*1 The secondary and interactive audio may  
not be included in the output bitstream if  
[Digital Output (SPDIF)] or [HDMI] option is set  
to [Primary Pass-Thru]. (Except LPCM Codec  
: the output always include interactive and  
secondary audio.)  
*3 On the PCM audio output, the sampling  
frequency of DIGITAL AUDIO OUT is limited to  
96 kHz.  
*4 If the [HDMI] or [Digital Output (SPDIF)] option  
is set to [DTS re-encode], the audio output is  
limited to 48 kHz and 5.1Ch. If the [HDMI] or  
[Digital Output (SPDIF)] option is set to [DTS re-  
encode], the DTS Re-encode audio is outputted  
for BD-ROM discs, and the original audio is  
outputted for the other discs (like [Primary Pass-  
Thru]).  
*2 This player automatically selects the HDMI audio  
according to the decoding capability of the  
connected HDMI device even though [HDMI]  
option is set to [Primary Pass-Thru].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 51  
The audio is outputted as PCM 48 kHz/16 bit for  
MP3/WMA file and PCM 44.1kHz/16 bit for Audio  
CD while playback.  
y
y
The Dolby TrueHD audio recorded on some Blu-  
ray discs consists of Dolby Digital and TrueHD  
audio. Dolby Digital audio is output through  
DIGITAL AUDIO OUT jacks and“DD”displays on  
the screen if TrueHD audio is not output (for  
example, when [HDMI] is set to [PCM Stereo] and  
[Digital Output (SPDIF)] is set to [Primary Pass-  
Thru]).  
You must select a digital audio output and  
a maximum sampling frequency that your  
Amplifier (or AV receiver) accepts using [Digital  
Output (SPDIF)], [HDMI] and [Sampling Freq.]  
options on the [Setup] menu (see page 25).  
y
y
With digital audio connection (DIGITAL AUDIO  
OUT or HDMI), Disc Menu button sounds of BD-  
ROM may not be heard if the [Digital Output  
(SPDIF)] or [HDMI] option is set to [Primary Pass-  
Thru].  
If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound  
or no sound at all.  
y
y
Multi-channel Digital Surround Sound via digital  
connection can only be obtained if your receiver  
is equipped with a Digital Multi-channel decoder.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 Appendix  
Video Output Resolution  
When the non-copy protected media is playing back  
Video Out  
COMPONENT VIDEO OUT  
HDMI connected HDMI disconnected  
HDMI OUT  
Resolution  
480i  
480p  
480p  
480p  
480i  
480p  
720p  
1080i  
720p  
720p  
1080i  
1080i  
1080p/24 Hz  
1080p / 60 Hz  
1080p / 24 Hz  
1080p / 60 Hz  
-
1080i  
1080i  
When the copy protected media is playing back  
Video Out  
COMPONENT VIDEO OUT  
HDMI OUT  
Resolution  
HDMI connected  
HDMI disconnected  
480i  
480p  
480p  
480p  
480i  
480i  
720p  
720p  
-
-
-
-
480i  
480i  
480i  
480i  
1080i  
1080i  
1080p/24 Hz  
1080p / 60 Hz  
1080p / 24 Hz  
1080p / 60 Hz  
HDMI OUT connection  
COMPONENT VIDEO OUT  
Connection  
Blu-ray Disc, DVD, Netflix or CinemaNow video  
stream could prevent up-scaling on analog output.  
If you select a resolution manually and then  
connect the HDMI jack to TV and your TV does  
not accept it, the resolution setting is set to  
[Auto].  
y
6
If you select a resolution that your TV does not  
accept, the warning message will appear. After  
resolution change, if you cannot see the screen,  
please wait 20 seconds and the resolution  
will automatically revert back to the previous  
resolution.  
VIDEO OUT connection  
The resolution of the VIDEO OUT jack is always  
outputted at 480i resolution.  
y
The 1080p video output frame rate may  
be automatically set to either 24 Hz or 60  
Hz depending both on the capability and  
preference of the connected TV and based on  
the native video frame rate of the content on the  
BD-ROM disc.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 53  
Specifications  
General  
Power requirements  
Power consumption  
Dimensions (W x H x D)  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
AC 120 V ~ 60 Hz  
14 W  
Approx. 430 x 45 x 190 mm  
1.6 kg  
5 °C to 35 °C  
5 % to 90 %  
Outputs  
VIDEO OUT  
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2  
19 pin (Type A, HDMI™ Connector)  
COMPONENT VIDEO OUT  
HDMI OUT (video/audio)  
ANALOG AUDIO OUT  
DIGITAL OUT (COAXIAL)  
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
0.5 V (p-p), 75 Ω, RCA jack x 1  
System  
Laser  
Semiconductor laser, wavelength: 405 nm / 650 nm  
405 nm / 650 nm  
wavelength  
Signal system  
Standard NTSC color TV system  
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)  
More than 90 dB (ANALOG OUT connectors only)  
Less than 0.02%  
Frequency response  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
LAN port  
6
More than 95 dB  
Ethernet jack x 1, 10BASE-T / 100BASE-TX  
DC 5 V 0500 mA  
Bus Power Supply (USB)  
Design and specifications are subject to change without notice.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 Appendix  
Notes on Discs  
Maintenance  
Handling Discs  
Do not touch the playback side of the disc. Hold  
the disc by the edges so that fingerprints do not  
get on the surface. Never stick paper or tape on the  
disc.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and  
packing materials. If you need to ship the unit, for  
maximum protection, re-pack the unit as it was  
originally packed at the factory.  
Storing Discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
y
y
y
Cleaning Discs  
Wiping with strong pressure may damage the  
surface.  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center to out.  
Do not leave rubber or plastic products in  
contact with the unit for a long period of time.  
Cleaning the unit  
Do not use strong solvents such as alcohol,  
benzine, thinner, commercially available cleaners,  
or anti-static spray intended for older vinyl records.  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution. Do not  
use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the  
unit.  
Maintaining the Unit  
The unit is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty  
or worn, the picture quality could be diminished.  
For details, please contact your nearest authorized  
service center.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 55  
Important Information  
Relating to Network  
Services  
All information, data, documents, communications,  
downloads, files, text, images, photographs,  
graphics, videos, webcasts, publications, tools,  
resources, software, code, programs, applets,  
widgets, applications, products and other content  
(“Content”) and all services and offerings (“Services”)  
provided or made available by or through any  
third party (each a“Service Provider”) is the sole  
responsibility of the Service Provider from whom it  
originated.  
The availability of and access to Content and  
Services furnished by the Service Provider through  
the LGE Device are subject to change at any time,  
without prior notice, including, but not limited to  
the suspension, removal or cessation of all or any  
part of the Content or Services.  
Should you have any inquiry or problem related  
to the Content or Services, you may refer to the  
Service Provider’s website for the most up-to-  
date information. LGE is neither responsible nor  
liable for customer service related to the Content  
and Services. Any question or request for service  
relating to the Content or Services should be made  
directly to the respective Content and Service  
Providers.  
6
Please note that LGE is not responsible for any  
Content or Services provided by the Service  
Provider or any changes to, removal of, or cessation  
of such Content or Services and does not warrant  
or guaranty the availability of or access to such  
Content or Services.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox Hearth Cell Phone X TC User Manual
Lennox Hearth Indoor Fireplace RDI 42 User Manual
Lennox International Inc Thermostat 43558 User Manual
Lightolier Work Light GVB Series 2X2 User Manual
Lindy Network Cables 32388 User Manual
Linear Drums 5525 User Manual
Meade Telescope LX90GPS User Manual
Melissa Iron 641 035 User Manual
Meridian America Stereo Amplifier Meridian 505 User Manual
Metz Flat Panel Television Slim TV User Manual