BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 1
ENGLISH
TM
Blu-ray Disc Player
Full HD 1080p Picture Quality
BD270
For Service/
Support, call:
Toll Free Number
1-800-243-0000
(http://us.lgservice.com)
As an ENERGY
S
TAR® Partner, LG
has determined that this product
or product models meet the
ENERGY
S
TAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
Copyright © 2009, LG Electronics U.S.A., Inc.
P/NO : MFL62745201
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 3
Notes on Copyrights
Licenses
Java and all Java-based trademarks and logos are trademarks or registered
trademarks of Sun Microsystems, Inc. in the United States and other countries.
ꢀ
Because AACS (Advanced Access Content System) is approved as content
protection system for BD format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are imposed on playback, analog
signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary
depending on your time of purchase as those restrictions may be adopted
and/or changed by AACS after the production of this product.
Furthermore, BD-ROM Mark and BD+ are additionally used as content pro-
tection systems for BD format, which imposes certain restrictions including
playback restrictions for BD-ROM Mark and/or BD+ protected contents. To
obtain additional information on AACS, BD-ROM Mark, BD+, or this product,
please contact an authorized Customer Service Centre.
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a reg-
istered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master
Audio I Essential are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights
Reserved.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
ꢀ
ꢀ
Many BD-ROM/DVD discs are encoded with copy protection. Because of
this, you should only connect your player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture from copy-protected discs.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
“x.v.Color” is a trademark of Sony Corporation.
“Blu-ray Disc” is a trademark.
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright pro-
tection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
“BONUSVIEW” is trademark of Blu-ray Disc Association.
This product is licensed under the AVC patent portfolio license and VC-1 patent
portfolio license for the personal and non-commercial use of a consumer to (i)
encode video in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a
consumer engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1 Video. No license
is granted or shall be implied for any other use. Additional information may be
ꢀ
Under the U.S. Copyright laws and Copyright laws of other countries, unau-
thorized recording, use, display, distribution, or revision of television pro-
grams, videotapes, BD-ROM discs, DVDs, CDs and other materials may sub-
ject you to civil and/or criminal liability.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and
Sony Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 4
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provid-
ed plug does not fit into your outlet, consult an electrician for replace-
ment of the obsolete outlet.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 5
Open source software notice . . . . . . . . . . . . . . . . . . . . . . . .35
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections to your TV . . . . . . . . . . . . . . . . . . . . . . . . . .13-14
Connecting to an Amplifier . . . . . . . . . . . . . . . . . . . . . . .14-15
The unit’s Audio Output Specifications . . . . . . . . . . . . . . . . .16
Resolution Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17
Using a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Using the Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Adjust the Setup settings . . . . . . . . . . . . . . . . . . . . . . . .19-23
Play a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-26
Displaying disc Information . . . . . . . . . . . . . . . . . . . . . . . . . .27
Listening to music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Viewing a photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29-30
Playing a DVD VR Format Disc . . . . . . . . . . . . . . . . . . . . . .30
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 6
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing materials. If you need
to ship the unit, for maximum protection, re-pack the unit as it was
originally packed at the factory.
Introduction
To ensure proper use of this product, please read this owner’s manual
carefully and retain for future reference.
This manual provides information on the operation and maintenance of
your player. Should the unit require service, contact an authorized service
location.
Keeping the exterior surfaces clean
ꢀ Do not use volatile liquids such as insecticide spray near the unit.
ꢀ Wiping with strong pressure may damage the surface.
About the
Symbol Display
ꢀ Do not leave rubber or plastic products in contact with the unit for a long
period of time.
“
“ may appear on your TV display during operation and indicates that
the function explained in this owner’s manual is not available on that spe-
cific media.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or thinner, as these
might damage the surface of the unit.
Symbols Used in this Manual
Note:
Indicates special notes and operating features.
Maintaining the Unit
The unit is a high-tech, precision device. If the optical pick-up lens and disc
drive parts are dirty or worn, the picture quality could be diminished.
For details, please contact your nearest authorized service centre.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols are applicable only
to the disc represented by the symbol.
Notes on Discs
Handling Discs
ALL
Do not touch the playback side of the disc. Hold the disc by the edges so
that fingerprints do not get on the surface. Never stick paper or tape on the
disc.
All discs listed below
BD
BD-ROM disc
DVD
DVD-Video, DVD R/RW in Video mode or VR
mode and finalized
Storing Discs
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
AVCHD
DVD R/RW in AVCHD format
Audio CDs
ACD
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc
from the centre out.
MUSIC Music files contained in the USB/Disc
Do not use strong solvents such as alcohol, benzine, thinner, commercially
available cleaners, or anti-static spray intended for older vinyl records.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 7
Playable Discs
Notes:
ꢀ Depending on the conditions of the recording equipment or the
CD-R/RW (or DVD R/RW) disc itself, some CD-R/RW (or DVD R/RW)
discs cannot be played on the unit.
Blu-ray Disc
-
-
Discs such as movies that can be purchased or rented
BD-R/RE discs that contain audio titles, Music or Photo files.
ꢀ Do not attach any seal or label to either side (the labeled side or the
recorded side) of a disc.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
ꢀ Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal).
Doing so may result in malfunctions.
DVD-R (8 cm / 12 cm disc)
-
-
-
-
Video mode and finalized only
Supports the dual layer disc also
AVCHD format
ꢀ Depending on the recording software & the finalization, some recorded
discs (CD-R/RW or DVD R/RW) may not be playable.
DVD-R discs that contain audio titles, Music or Photo files.
ꢀ DVD R/RW and CD-R/RW discs recorded using a personal computer or
a DVD or CD Recorder may not play if the disc is damaged or dirty, or if
there is dirt or condensation on the player’s lens.
DVD-RW (8 cm / 12 cm disc)
-
-
-
VR mode, Video mode and finalized only
AVCHD format
DVD-RW discs that contain audio titles, Music or Photo files.
ꢀ If you record a disc using a personal computer, even if it is recorded in a
compatible format, there are cases in which it may not play because of
the settings of the application software used to create the disc. (Check
with the software publisher for more detailed information.)
DVD+R (8 cm / 12 cm disc)
-
-
-
-
Finalized disc only
Supports the dual layer disc also
AVCHD format
ꢀ This player requires discs and recordings to meet certain technical stan-
dards in order to achieve optimal playback quality. Pre-recorded DVDs
are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA
files) and these require certain pre-existing conditions to ensure compat-
ible playback.
DVD+R discs that contain audio titles, Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
-
-
-
Video mode and finalized only
AVCHD format
DVD+RW discs that contain audio titles, Music or Photo files.
ꢀ Customers should note that permission is required in order to download
MP3 / WMA files and music from the Internet. Our company has no right
to grant such permission. Permission should always be sought from the
copyright owner.
Audio CD (8 cm / 12 cm disc)
Audio CDs or CD-Rs/CD-RWs in audio CD format that can be
purchased
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, Music or Photo files.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 8
Menu sounds
BD-ROM Disc Features
When you highlight or select a menu option, sounds can be heard such as
button clicks or a voice-over explaining the highlighted menu choice.
BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a
single sided disc - about 5 to 10 times the capacity of a DVD.
BD-ROM Discs also support the highest quality HD video available in the
industry (up to 1920 x 1080) - Large capacity means no compromise on
video quality. Furthermore, a BD-ROM disc has the same familiar size and
look as DVD.
ꢀ The following BD-ROM disc features are disc dependent and will vary.
ꢀ Appearance and navigation of features will also vary from disc to disc.
ꢀ Not all discs will have the features described below.
Multi-page/PopUp Menus
With DVD-Video, playback is interrupted each time a new menu screen is
accessed. Due to BD-ROM disc’s ability to preload data from the disc with-
out interrupting playback, a menu can consist of several pages.
You can browse through the menu pages or select different menu paths,
while the audio and video remain playing in the background.
Interactivity
Certain BD-ROM Discs may contain animated menus and/or trivia games.
ꢀ BD-ROM, Hybrid disc have both BD-ROM and DVD (or CD) layers on
one side. On such discs, BD-ROM layer will be only played back in this
player.
User Browsable Slideshows
With BD-ROM Discs, you can browse through various still pictures while
the audio remains playing.
Subtitles
Video highlights
Depending on what is contained on the BD-ROM disc, you may be able to
select different font styles, sizes and colours for some subtitles. Subtitles
may also be animated, scrolled or faded in and out.
The BD-ROM format for movie distribution supports three highly advanced
video codecs, including MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1.
HD video resolutions are also available:
ꢀ 1920 x 1080 HD
BD-J Interactive Capability
The BD-ROM format supports Java for interactive functions. “BD-J” offers
content providers almost unlimited functionality when creating interactive
BD-ROM titles.
ꢀ 1280 x 720 HD
Graphic planes
Two individual, full HD resolution (1920x1080) graphic planes (layers) are
available, on top of the HD video layer. One plane is assigned to video-
related, frame accurate graphics (like subtitles), and the other plane is
assigned to interactive graphic elements, such as buttons or menus.
For both planes, various wipes, fades and scroll effects may be available.
BD-ROM Disc Compatibility
This player supports BD-ROM Profile 1.1.
• Discs supporting BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1/Final Standard Profile) that allows Virtual packages or Picture-in-
Picture functions to be used.
For High-Definition Playback
To view high-definition contents from BD-ROM discs, an HDTV is required.
Some discs may require HDMI OUT for viewing of high-definition contents.
Ability to view high-definition contents in BD-ROM discs may be limited
depending on the resolution of your TV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 9
Regional Code
Certain System Requirements
This unit has a regional code printed on the rear of the unit. This unit can
play only BD-ROM or DVD discs labeled same as the rear of the unit or
“ALL”.
For high definition video playback:
• High definition display that has HDMI input jacks.
• BD-ROM disc with high definition content.
• HDMI or HDCP capable DVI input on your display device is required for
some content (as specified by disc authors).
AVCHD (Advanced Video Codec High Definition)
• For up-conversion of standard definition DVD, a HDMI or HDCP capable
DVI input on your display device is required for copy protected content.
• This player can playback AVCHD format discs. These discs are normally
recorded and used in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format is capable of compressing images at
higher efficiency than that of the conventional image compressing
format.
• Some AVCHD discs use the “x.v.Colour” format.
• This player can playback AVCHD discs using “x.v.Colour” format.
• Some AVCHD format discs may not play, depending on the recording
condition.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio
playback:
• An amplifier/receiver with a built-in (Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS or DTS-HD) decoder.
• Main, center, surround speakers and subwoofer as necessary for cho-
sen format.
• AVCHD format discs need to be finalized.
• “x.v.Colour” offers a wider colour range than normal DVD camcorder
discs.
Compatibility Notes
• Because BD-ROM is a new format, certain disc, digital connection and
other compatibility issues are possible. If you experience compatibility
problems, please contact an authorized Customer Service Centre.
• Viewing high-definition content and up-converting standard DVD content
may require a HDMI-capable input or HDCP-capable DVI input on your
display device.
• Some BD-ROM and DVD discs may restrict the use of some operation
commands or features.
• Dolby TrueHD, Dolby Digital Plus and DTS-HD are supported with maxi-
mum 7.1 channels if you use HDMI connection for the audio output of
the unit.
• You can use a USB Flash Drive that is used to store some disc related
information, including downloaded on-line content. The disc you are
using will control how long this information is retained.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 10
Remote control
SUBTITLE - ON/OFF: Switches the subtitle on or off.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
TV
POWER
POWER (1): Switches the player ON or OFF.
SUBTITLE ( ): Selects a subtitle language.
0-9 numerical buttons: Select numbered options in a
menu.
TITLE/POP-UP: Displays the DVD title menu or
BD-ROM’s popup menu, if available.
RESOLUTION: Sets the output resolution for HDMI
jacks.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
a
Coloured (A, B, C, D) buttons: Use to navigate
BD-ROM menus. They are also used for [MOVIE],
[PHOTO] and [MUSIC] menu.
OPEN/CLOSE (Z): Opens and closes the disc tray.
TV Control Buttons: See page 31.
MARKER: Marks any point during playback.
SEARCH: Displays or exits the search menu.
REPEAT: Repeat a desired section or sequence.
ZOOM: Displays or exits the [Zoom] menu.
CLEAR: Removes a mark on the search menu or a
number when setting the password.
SCAN
SKIP
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
PLAY
SCAN (m / M): Searches backward or forward.
b
c
PAUSE
STOP
SKIP (. / >): Go to next or previous chapter /
track / file.
HOME
Remote Control Operation
PAUSE (X): Pauses playback.
Point the Remote Control at the remote sensor and
press the buttons.
PLAY (N): Starts playback.
Remote Control Battery Installation
Remove the battery cover on the rear of the Remote
Control, and insert a R03 (size AAA) battery with
matched correctly.
STOP (x): Stops playback.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
HOME: Displays or exits the [Home Menu].
DISC MENU: Accesses menu on a disc.
and
RETURN (O): Exits the menu or resumes playback.
The resume play function may work depending on the
BD-ROM disc.
d
DISPLAY: Displays or exits On-Screen Display.
Direction buttons: Selects an option in the menu.
ENTER ( ): Acknowledges menu selection.
AUDIO ( ): Selects an audio language or audio
channel.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 11
Front panel
a
b
c
d e f g h i
aDisc Tray
Insert a disc here.
fN / X (PLAY / PAUSE)
Starts playback.
Pause playback temporarily,
press again to exit pause mode.
bZ (OPEN/CLOSE)
Opens or closes the disc tray.
gx (STOP)
c1 (POWER)
Stops playback.
Switches the unit ON or OFF.
h. / > (SKIP)
dDisplay Window
Go to next or previous file/track/chapter.
Shows the current status of the player.
iUSB Port
eRemote Sensor
Connect a USB Flash Drive.
Point the remote control here.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 12
Rear panel
DIGITAL
AUDIO OUT
1080p
a
b c d e
aAC Power Cord
d2CH AUDIO OUT (Left/Right)
Connect to a power source.
Connect to a TV with 2 channel audio inputs.
bHDMI OUT (1080p)
eDIGITAL AUDIO OUT (COAXIAL)
Connect to TV with HDMI inputs. (Interface for digital audio and video)
Connect to digital (coaxial) audio equipment
cVIDEO OUT
Connect to a TV with video inputs.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 13
Connect the HDMI jack on the player to the HDMI jack on a HDMI
compatible TV or monitor (H).
Connections to Your TV
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Make one of the following connections, depending on the capabilities of
your existing equipment.
Note:
Tips:
If a connected HDMI device does not accept the audio output of the unit,
the HDMI device’s audio sound may be distorted or may not output.
• Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Use only one of the con-
nections described below.
Tips:
• Please refer to the manuals of your TV, Stereo System or other devices
as necessary to make the best connections.
• When you use HDMI connection, you can change the resolution for the
HDMI output. (Refer to “Resolution Setting” on page 16-17.)
• Select the type of video output from the HDMI OUT jack using
[HDMI Color Setting] option on the [Setup] menu (see page 20).
Cautions:
• Make sure the player is connected directly to the TV. Tune the TV to the
correct video input channel.
Cautions:
• Do not connect the player’s AUDIO OUT jack to the phono in jack
(record player) of your audio system.
• Do not connect your player via your VCR. The image could be distorted
by the copy protection system.
• Changing the resolution when the connection has already been estab-
lished may result in malfunctions. To solve the problem, turn off the play-
er and then turn it on again.
• When the HDMI connection with HDCP is not verified, TV screen is
changed to black screen. In this case, check the HDMI connection, or
disconnect the HDMI cable.
HDMI Connection
• If there is noise or lines on the screen, please check the HDMI cable
(length is generally limited to 15 ft.).
If you have a HDMI TV or monitor, you can connect it to this player using a
HDMI cable.
Additional Information for HDMI
• When you connect a HDMI or DVI compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and this player. Next, switch on
the HDMI/DVI device and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720x480p, 1280x720p,
1920x1080i or 1920x1080p video input.
TV
H
DIGITAL
AUDIO OUT
• Not all HDCP-compatible HDMI or DVI devices will work with this player.
- The picture will not be displayed properly with non-HDCP device.
- This player does not playback and TV screen is changed to black
screen.
1080p
DIGITAL
AUDIO OUT
1080p
BD player
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 14
Video/Audio (Left/Right) Connection
Connecting to an Amplifier
Make one of the following connections, depending on the capabilities of
your existing equipment.
Connect the VIDEO OUT jack on the player to the video in jack on the TV
using a video cable (V).
Connect the left and right AUDIO OUT jacks of the player to the audio left
and right IN jacks on the TV using the audio cables (A).
Note:
Since many factors affect the type of audio output, see “The unit’s Audio
Output Specifications” on page 16 for details.
Connecting to an Amplifier via 2 Channel Audio Output
Connect the Left and Right 2CH AUDIO OUT jacks on the player to the
audio left and right in jacks on your amplifier, receiver, or stereo system,
using audio cables (A).
TV
V
A
Connecting to an Amplifier via Digital Audio Output
(Coaxial)
Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in
jack (COAXIAL X) on your amplifier. Use an optional digital
(coaxial X) audio cable. You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on pages 21-22.)
BD player
BD player
A
X
Amplifier/Receiver
14
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 15
Connecting to an Amplifier via HDMI Output
Notes:
• You must select a digital audio output and a maximum sampling
frequency that your Amplifier (or AV receiver) accepts using [SPDIF],
[HDMI] and [Sampling Freq.] options on the [Setup] menu
(see page 21-22).
Connect the player’s HDMI OUT jack to the corresponding in jack on your
amplifier. Use a HDMI cable (H1). You will need to activate the player’s
digital output. (See “[AUDIO] Menu” on pages 21-22.)
• With digital audio connection (SPDIF or HDMI), Disc Menu button
sounds of BD-ROM may not be heard if the [SPDIF] or [HDMI] option is
set to [Primary Pass-Thru].
• If the audio format of the digital output does not match the capabilities of
your receiver, the receiver will produce a strong, distorted sound or no
sound at all.
BD player
• Multi-channel Digital Surround Sound via digital connection can only be
obtained if your receiver is equipped with a Digital Multi-channel
decoder.
• To see the audio format of the current disc in the on-screen display,
press AUDIO.
H1
Amplifier/Receiver
TV
H2
Digital Multi-channel sound
A digital multi-channel connection provides the best sound quality. For this
you need a multi-channel Audio/Video Receiver that supports one or more
of the audio formats supported by your player. Check the receiver manual
and the logos on the front of the receiver. (PCM Stereo, PCM Multi-Ch,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)
Tip:
Connect the amplifier’s HDMI output jack to HDMI input jack on your TV
using a HDMI cable (H2) if your amplifier has HDMI output jack.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 16
*3 The [PCM Multi-CH]/[Primary Pass-Thru] setting of the [HDMI] option
and [DTS re-encode] setting of the [SPDIF] option cannot be set
together. If you set the [HDMI] option to [PCM Multi-CH] or
The unit’s Audio Output Specifications
5
Jack/
Setting
SPDIF (DIGITAL AUDIO OUT)
DTS Primary
Re-encode *3 *6 Pass-Thru
*
[Primary Pass-Thru], the [SPDIF] option is set to [PCM Stereo] auto-
matically. Also, if you set the [SPDIF] option to [DTS Re-encode] and
the [HDMI] option is set to [PCM Stereo] automatically.
Analog Output
Stereo
PCM
Stereo
1
Source
Dolby Digital
*
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Dolby Digital
Dolby Digital
Dolby Digital
DTS
*4 The LPCM audio recorded at 192kHz sampling frequency will be
outputted as stereo sound.
Dolby Digital Plus
Dolby TrueHD
DTS
*5 On the PCM audio output, the sampling frequency of SPDIF (DIGITAL
AUDIO OUT) is limited to 96 kHz.
DTS-HD
DTS
*6 If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the audio
output is limited to 48 kHz and
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 2ch
PCM 2ch
5.1 ch. If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the
DTS Re-encode audio is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like [Primary Pass-Thru]).
• If [HDMI] option is set to [PCM Multi-CH] and [SPDIF] option is set to
[Primary Pass-Thru] when the unit plays back Dolby Digital Plus or
TrueHD audio, SPDIF (DIGITAL AUDIO OUT) jack is limited to “PCM
2ch”.
Jack/
Setting
HDMI OUT
DTS
PCM
Stereo
PCM
Multi-Ch
Primary
3
6
Source
Dolby Digital
*
Re-encode
*
Pass-Thru *1, *2
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 5.1ch
PCM 7.1ch
PCM 7.1ch
PCM 5.1ch
PCM 7.1ch
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
• If the HDMI connection is version 1.3 and Dolby Digital Plus/Dolby
TrueHD is outputted from HDMI OUT jack, SPDIF (DIGITAL AUDIO
OUT) jack is limited to “PCM 2ch” (When the HDMI and SPDIF are
connected simultaneously).
Dolby Digital Plus
Dolby TrueHD
DTS
DTS
DTS
DTS
• The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and
PCM 44.1kHz/16 bit for Audio CD while playback.
DTS-HD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
DTS
PCM 2ch
• The Dolby TrueHD audio recorded on some Blu-ray discs consists of
Dolby Digital and TrueHD audio. Dolby Digital audio is output through
DIGITAL AUDIO OUT jacks and "DD" displays on the screen if TrueHD
audio is not output (for example, when [HDMI] is set to [PCM Stereo]
and [SPDIF] is set to [Primary Pass-Thru]).
PCM 5.1ch
PCM 7.1ch
DTS
PCM 5.1ch
4
DTS
PCM 7.1ch
*
Notes:
*1 The secondary and interactive audio may not be included in the output
bitstream if [SPDIF] or [HDMI] option is set to [Primary Pass-Thru].
(Except LPCM Codec : the output always include interactive and
secondary audio.)
Resolution Setting
The player provides several output resolutions for HDMI OUT jacks.
You can change the resolution using [Setup] menu or pressing the
RESOLUTION button in stop mode.
*2 This player automatically selects the HDMI audio according to the
decoding capability of the connected HDMI device even though [HDMI]
option is set to [Primary Pass-Thru].
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 17
• When the copy protected media is playing back
Note:
Video Output
Resolution Setting
HDMI OUT
Since several factors affect the resolution of video output, see “Available
resolution according to the resolution setting” on next page.
480i
480p
480p
480p
How to change the resolution using RESOLUTION
button
720p
720p
Press RESOLUTION repeatedly in stop mode to change the resolution.
The display window will show you the current resolution.
1080i
1080i
1080p / 24Hz
1080p / 60Hz
1080p / 24Hz
1080p / 60Hz
How to change the resolution using the [Setup] menu
1. Press HOME and the [Home Menu] appears.
2. Select the [Setup] and press ENTER. The [Setup] menu appears.
Notes:
• Depending on your display, some of the resolution settings may result in
the picture disappearing or an abnormal picture appearing. In this case,
press HOME then RESOLUTION repeatedly until the picture re-appear.
3. Use v V to select [DISPLAY] option then press B to move to the
second level.
4. Use v V to select the [Resolution] option then press B to move to the
• This player supports simultaneous output of all video out jacks. The
resolution of the HDMI output will not be the same as the resolution
output on the component video output.
third level.
5. Use v V to select the desired resolution then press ENTER to confirm
your selection.
HDMI OUT connection
Available resolution according to the resolution setting
• For the 480i resolution setting, real output resolution of HDMI OUT will
change to 480p.
• When the non-copy protected media is playing back
• If you select a resolution manually and then connect the HDMI jack to
TV and your TV does not accept it, the resolution setting is set to [Auto].
Video Output
Resolution Setting
HDMI OUT
• If you select a resolution that your TV does not accept, the warning
message will appear. After resolution change, if you cannot see the
screen, please wait 20 seconds and the resolution will automatically
revert back to the previous resolution.
480i
480p
480p
480p
720p
720p
• The 1080p video output frame rate may be automatically set to either
24Hz or 60Hz depending both on the capability and preference of the
connected TV and based on the native video frame rate of the content
on the BD-ROM disc.
1080i
1080i
1080p / 24Hz
1080p / 60Hz
1080p / 24Hz
1080p / 60Hz
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always outputted at 480i
resolution.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 18
Notes:
Using a USB Flash Drive
• This unit supports only USB Flash Drive with FAT16 or FAT32 format.
This unit can play the music and photo files con-
tained on the USB Flash Drive.
• Do not extract the USB Flash Drive during operation (play, etc.).
ON REMOTE
• A USB Flash Drive which requires additional program installation when
you have connected it to a computer is not supported.
1. Insert a USB Flash Drive to the USB port:
2 Displays the [Home Menu]:
–
HOME
• USB Flash Drive: USB Flash Drive that support USB1.1 and USB2.0.
3 Select a main option:
[Music] or [Photo] option
b B, ENTER
• Music files (MP3/WMA) and photo files (JPEG/PNG) can be played. For
details of operations on each file, refer to relevant pages.
4 Select the [USB] option:
b B
• Regular back up is recommended to prevent data loss.
5 Displays corresponding menu list:
[MUSIC] or [PHOTO] menu appears.
Details for the menu are on pages 28-30.
ENTER
• If you use a USB extension cable or USB HUB, the USB Flash Drive
may not be recognized.
• Some USB Flash Drives may not work with this unit.
• Digital camera and mobile phone are not supported.
Tip:
If you select the [Photo] or [Music] option when a USB Flash Drive is con-
nected and a disc is inserted simultaneously, the menu for selecting a
media will appear. Select a media then press ENTER.
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
Insert/Remove a USB Flash Drive
Inserting a USB Flash Drive – Insert straight-in until it fits into place.
Removing a USB Flash Drive – Withdraw the USB Flash Drive
carefully.
BD player
USB Flash Drive
18
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 19
Using the Home Menu
Adjust the Setup settings
ON REMOTE
ON REMOTE
1 Displays the [Home Menu]:
2 Select an option:
HOME
b B
1 Displays the [Home Menu]:
2 Select the [Setup] option:
HOME
b B, ENTER
3 Displays the selected option menu:
4 Exit the [Home Menu]:
ENTER
HOME
3 Select a desired option on the first level:
4 Move to second level:
v V
B
5 Select a desired option on the second level: v V
6 Move to third level:
B
7 Adjust or confirm the setting:
8 Go back to the previous level:
9 Exit the [Setup] menu:
v V, ENTER
b
HOME
[Movie] – Start video media’s playback or displays the [MOVIE] menu.
[Photo] – Displays [PHOTO] menu. (page 29-30)
[Music] – Displays [MUSIC]menu. (page 28)
[Setup] – Displays the [Setup] menu. (page 19-23)
Tip:
If you select the [Photo] or [Music] option when a USB Flash Drive is con-
nected and a disc is inserted simultaneously, the menu for selecting a
media will appear. Select a media then press ENTER.
First level
Note:
The unit will be in stop mode then the [Home Menu] will appear if you
press HOME during playback.
Second level
Third level
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 20
[720p] – Outputs 720 lines of progressive video.
[1080i] – Outputs 1080 lines of interlaced video.
[1080p] – Outputs 1080 lines of progressive video.
[DISPLAY] Menu
1080p Display Mode
When the resolution is set to 1080p, select [24Hz] for smooth presentation
of film material (1080/24p) with a HDMI-equipped display compatible with
1080/24p input.
Notes:
• When you select [24Hz], you may experience some picture disturbance
when the video switches video and film material. In this case, select
[60Hz].
TV Aspect Ratio
• Even when [1080p Display Mode] is set to [24Hz], if your TV is not
compatible with 1080/24p, the actual frame frequency of the video
output will be 60Hz to match the video source format.
• When the 1080p/24Hz video source is outputted via HDMI connection,
the VIDEO OUT will not output any video signal.
[4:3 Letter Box] – Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above and below the
picture.
[4:3 Pan Scan] – Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen. Both sides of the
picture are cut off.
HDMI Color Setting
[16:9 Original] – Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original 4:3 aspect ratio, with black
bars appearing at the left and right sides.
Select the type of output from the HDMI OUT jack. For this setting, please
refer to the manuals of your display device.
[YCbCr] – Select when connecting to a HDMI display device.
[16:9 Full] – Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the
entire screen.
[RGB] – Select when connecting to a RGB display device.
Note:
You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the res-
olution is set to higher than 720p.
Resolution
Sets the output resolution of the HDMI video signal.
Refer to “Resolution Setting” on page 16-17 for details about the
resolution.
[Auto] – If the HDMI OUT jack is connected for TVs providing display
information (EDID), automatically selects the resolution best suited to
the connected TV.
[480i] – Outputs 480 lines of interlaced video.
[480p] – Outputs 480 lines progressive video.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 21
[LANGUAGE] Menu
[AUDIO] Menu
Each disc has a variety of audio output options. Set the player’s Audio
options according to the type of audio system you use.
Note:
Since many factors affect the type of audio output, see “The unit’s Audio
Output Specifications” on page 16 for details.
Display Menu
Select a language for the [Setup] menu and on-screen display.
Disc Menu / Disc Audio / Disc Subtitle
Select the language you prefer for the audio track (disc audio), subtitles,
and the disc menu.
HDMI / SPDIF (Digital Audio Output)
[Original] – Refers to the original language in which the disc was
recorded.
Select the output sound format when a device equipped with a HDMI or
Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO
OUT jack on this player.
[Other] – Press ENTER to select another language. Use number but-
tons then ENTER to enter the corresponding 4-digit number according
to the language code list on page 32.
[PCM Stereo] – Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-channel digital stereo
decoder.
[Off] (for Disc Subtitle) – Turn off Subtitle.
[PCM Multi-Ch] (HDMI only) – Select if you connect this unit’s
HDMI OUT jack to a device with multi-channel digital decoder.
Note:
Depending on the disc, your language setting may not work for some
discs.
[DTS Re-Encode] – Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS decoder.
[Primary Pass-Thru] – Select if you connect this unit’s DIGITAL
AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 22
[LOCK] Menu (Parental Control)
Notes:
• When [HDMI] option is set to [PCM Multi-Ch], the audio may output as
PCM Stereo if the PCM Multi-Ch information is not detected from HDMI
device with EDID.
The [LOCK] settings affect only BD and DVD playback.
• If the [HDMI] or [SPDIF] option is set to [DTS re-encode], the DTS Re-
encode audio is outputted for BD-ROM discs with secondary audio and
the original audio is outputted for the other discs (like [Primary Pass-
Thru]).
Sampling Freq.
[48KHz] – Select this if your A/V Receiver or Amplifier is NOT capable
of handling 192 KHz and 96 KHz signal. When this choice is made,
this unit automatically converts any 192 KHz and 96 KHz signals to 48
KHz so your system can decode them.
To access the any features in [LOCK] settings, you must enter the 4-digit
security code you have created.
If you have not entered a password yet, you are prompted to do so. Enter
a 4-digit password and press ENTER. Enter it again and press ENTER to
verify.
[96KHz] – Select this if your A/V Receiver or Amplifier is NOT capable
of handling 192 KHz signals. When this choice is made, this unit auto-
matically converts any 192 KHz signals to 96 KHz so your system can
decode them.
Password
[192KHz] – Select this if your A/V Receiver or Amplifier is capable of
handling 192 KHz signals.
You can create, change or delete the password.
[New] – Enter a 4-digit password and press ENTER. Enter it again and
press ENTER to create a new password.
[Change] – Enter the current password and press ENTER.
Enter a 4-digit password and press ENTER. Enter it again and press
ENTER to create a new password.
Check the documentation for your A/V Receiver or Amplifier to verify its
capabilities.
DRC (Dynamic Range Control)
When a disc encoded in Dolby Digital or Dolby Digital Plus is playing back,
you may wish to compress the dynamic range of the audio output (the dif-
ference between the loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without losing clarity of sound.
Set DRC to [On] for this effect.
[Delete] – Enter the 4-digit password and press ENTER to delete the
password.
Tip:
If you make a mistake before pressing ENTER, press CLEAR. Then input
the correct password.
Note:
If you forget your password
The DRC setting can be changed only when a disc is not inserted or the
unit is in complete stop mode.
If you forget your password, you can clear it using the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The password is cleared.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 23
DVD Rating
[OTHERS] Menu
Blocks playback of rated disc based on their content. (Not all discs are
rated.)
[Rating 1-8] – Rating one (1) has the most restrictions and rating eight
(8) is the least restrictive.
[Unlock] – If you select unlock, parental control is not active and the
disc plays in full.
BD Rating
Set an age limit of BD-ROM play. Use number buttons to input an age limit
for BD-ROM viewing.
Skin
[255] – All BD-ROM can be played.
Changes the background of the initial screen.
[0-254] – Prohibits play of BD-ROM with corresponding ratings
recorded on them.
Initialize
You can reset the player to its original factory settings or initialize the BD
storage.
Notes:
• The [BD Rating] will be applied only for the BD disc that containing the
Advanced Rating Control.
[Factory Set] – If you need to, you can reset the player to all its facto-
ry settings. Some options cannot be reset. (Rating, Password and Area
Code, etc.)
• For the region using MPAA rating level, refer to the table below as an
example.
[BD Storage Clear] – Initializes the BD contents from the connected
USB Flash Drive.
BD Rating
MPAA rating
0
G
8
PG
13
17
18
255
PG-13
R
NC-17
Not restricted
Area Code
Enter the code of the area whose standards were used to rate the DVD
video disc, based on the list on page 32.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 24
Press PLAY (N) to resume playback (from the scene point). If you press
STOP (x) again or unload the disc (“x” appears on the screen.), the unit
will clear the stopped point. (Xx = Resume Stop, x = Complete Stop)
Play a disc
ON REMOTE
Notes:
1 Open the disc tray:
2 Insert a disc:
OPEN/CLOSE (Z)
-
•
•
•
The resume point may be cleared when a button is pressed
(for example; POWER, OPEN/CLOSE, etc).
On BD-Video discs including BD-J, the resume play function does not
work.
3 Close the disc tray:
OPEN/CLOSE (Z)
v V b B, ENTER
4 Adjust the disc menu settings:
A disc menu may not appear on the screen
depending on the disc.
On BD-ROM interactive title, the unit will be in Complete Stop mode if
you press STOP once during playback.
5 Starts playback:
6 Stops playback:
PLAY (N)
Pause a playback
ALL
STOP (x )
During playback, press PAUSE (X) to pause playback. Press PLAY (N)
to continue playback.
Notes:
•
When you turn on the player or replace a disc, the player returns to the
Tip:
initial default setting. Depending on the disc, a specific type of audio
that the disc has is output.
During Audio CD or MP3/WMA playback, press PAUSE (X) once again to
resume playback.
•
Depending on the pre-recorded contents of the BD-ROM, some func-
tions may not be available or may be operated differently than other
media.
Frame-by-Frame playback
BD
DVD AVCHD
Press PAUSE (X) repeatedly to play Frame-by-Frame playback.
If a disc menu screen is displayed
Slow down the playing speed
BD
DVD AVCHD
BD
DVD AVCHD
While the playback is paused, press SCAN M repeatedly to play in slow
motion (4 steps, forward only).
The menu screen may be displayed first after loading a disc which con-
tains a menu.
Use b B v V buttons to select the title/chapter you want to view, then
press ENTER to start playback.
Fast forward or fast reverse
ALL
Press SCAN (m or M) to play fast forward or fast reverse during
playback.
You can change the various playback speeds by pressing SCAN (m or
M) repeatedly. Press PLAY (N) to continue play at normal speed.
Skip to the next/previous chapter/track/file
ALL
During playback, press . or > to go to the next chapter/track/file or
to return to the beginning of the current chapter/track/file.
Press . twice briefly to step back to the previous chapter/track/file.
Note:
This function may not work on some disc or titles.
Resume playback
ALL
During playback, press STOP (x) to stop playback.
The unit records the stopped point, depending on the disc. “Xx” appears
on the screen briefly.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 25
Playing repeatedly
ALL
Enlarge the playback image
DVD AVCHD
BD
During playback, press REPEAT repeatedly to select a desired repeat
mode. The current title, chapter or track will be played back repeatedly. To
return to normal playback, press REPEAT repeatedly to select [Off].
When you are using the repeat, A-B repeat or random functions in the
[MUSIC] menu, refer to the mode icons as shown below
During playback or pause mode, press ZOOM to display the [Zoom] menu.
Use the green or yellow buttons to zoom in or out of the picture. You can
move through the zoomed picture using b B v V buttons.
To return to the normal picture size, press the yellow button repeatedly to
fully zoom out of the picture. Press RETURN to exit [Zoom] menu.
Track – The current track or file will be played back repeatedly.
All – All the tracks or files will be played back repeatedly.
Note:
This function may not work on some disc or titles.
– Selected portion will be repeated continually. (Audio CD only)
– The tracks or files will be played back in random order.
Viewing the Title menu or Popup menu
DVD
BD
Press TITLE/POP-UP to displays the title menu or popup menu.
If the current DVD or BD-ROM disc has a menu, the Title menu or Popup
menu appears on the screen. Depending on the disc, the menu may not
be available
All – All the tracks or files will be played back repeatedly in
random order.
To cancel the A-B repeat, repeat or Random playback, press CLEAR.
Notes:
Marker Search
DVD AVCHD
BD
• If you press > once during Repeat Chapter/Track playback, the
repeat playback cancels.
To enter a Marker
• This function may not work on some disc or titles.
You can start playback from up to nine memorized points. To enter a mark-
er, press MARKER at the desired point on the disc. The Marker icon
appears on the TV screen briefly. Repeat to enter up to nine markers.
Repeating a specific portion (A-B)
BD
DVD AVCHD ACD
To Recall or Clear a Marked Scene
Press REPEAT to select [A-] at the beginning of the portion you wish to
repeat and press ENTER at the end of the portion. Your selected portion will
be repeated continually. You cannot select a portion less than 3 seconds.
To return to normal playback, press REPEAT repeatedly to select [Off].
See “Playing repeatedly” for more details about repeat and random icons
in the [MUSIC] menu.
Press SEARCH and the search menu appears on the screen.
Press a number button to select a marker number that you want to recall.
Playback starts from the marked scene.
OR
Press V to highlight a marker number. Use b / B to select a marked scene
that you want to recall or clear.
Press ENTER and playback starts from the marked scene. Press CLEAR
and the marked scene is erased from the search menu.
Note:
This function may not work on some disc or titles.
Playing in random order
ACD MUSIC
Notes:
• This function may not work on some disc or titles.
• All marked points are cleared if you press STOP (x) twice (complete
stop), the title is changed or if you unload the disc.
• If the total length of the title is less than 10 seconds, this function is not
available.
During playback, press REPEAT repeatedly to select a Random (
) or
Random All ( All) mode icon. The tracks or files will be played in
random order. To return to normal playback, press REPEAT repeatedly to
delete the mode icons. See “Playing repeatedly” for more details about
repeat and random icons in the [MUSIC] menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 26
Hearing a different audio
Using coloured (A, B, C, D) Buttons
BD
DVD AVCHD
BD
These buttons are available only during BD-J contents playback. Use the
appropriate buttons as indicated by the display. Depending on the disc
contents, the functions of each button may differ.
During playback, press AUDIO repeatedly to hear a different audio
language, audio track or audio channel.
OR
During playback, press DISPLAY to display the playback menu.
Use v V to select the [Audio] option then use b B to select desired
audio language, audio track or audio channel.
Last Scene Memory
DVD
BD
This unit memorizes the last scene from the last disc that is viewed. The
last scene remains in memory even if you remove the disc from the unit or
switch off the unit. If you load a disc that has the scene memorized, the
scene is automatically recalled.
Notes:
• Some discs allow you to change audio selections only via the disc
menu. If this is the case, press TITLE/POP-UP or DISC MENU button
and choose the appropriate audio from the selections on the disc menu.
• Immediately after you have switched sound, there may be a temporary
discrepancy between the display and actual sound.
Notes:
•
•
Settings are stored in memory for use any time.
This unit does not memorize settings of a disc if you switch off the unit
before commencing to play it.
• On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed
with [MultiCH] in the on-screen display.
•
•
Last Scene Memory function for a previous disc is erased once a
different disc is played.
This function may not work depending on the disc.
Selecting a subtitle language
BD
DVD AVCHD
During playback, press SUBTITLE-ON/OFF to switch the subtitle on or off
and press SUBTITLE repeatedly to select a desired subtitle language.
Screen Saver
The screen saver appears when you leave the player in Stop mode for
about five minutes. If the Screen Saver is displayed for five minutes, the
unit automatically turns itself off.
The screen saver also appears when you are playing music for about five
minutes, but the player will not be turned off.
OR
During playback, press DISPLAY to display the playback menu.
Use v V to select the [Subtitle] option then use b B to select desired
subtitle language.
Note:
Some discs allow you to change subtitle selections only via the disc menu.
If this is the case, press TITLE/POP-UP or DISC MENU button and choose
the appropriate subtitle from the selections on the disc menu.
Using the search menu
BD
DVD AVCHD
During playback, press SEARCH to display the search menu.
Press b B to skip the playback 15 seconds forward or backward.
Tip:
You can select a point that you want to skip by pressing and holding b B
button.
Note:
This function may not work on some disc or titles.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 27
Moving to another title/chapter/track
BD
DVD AVCHD
Displaying disc information
When a disc has more than one title/chapter/track, you can move to
another title/chapter/track.
ON REMOTE
Press DISPLAY during playback then use v V to select the
[Title/Chapter/Track] icon. Then, press the appropriate numbered button
(0-9) or b / B to select a title/chapter/track number.
1 Play the disc loaded on the unit:
2 Displays the playback menu:
3 Select an item:
PLAY
DISPLAY
v V
Playing from selected time
BD
DVD AVCHD
4 Adjust the playback menu settings:
5 Exit the disc playback menu:
b B
Press DISPLAY during playback. The time search box shows the elapsed
playing time. Select the [Time] option and then input the required start time
in hours, minutes, and seconds from left to right. For example, to find a
scene at 2 hours, 10 minutes, and 20 seconds, enter “21020” and press
ENTER. If you enter the wrong numbers, press CLEAR and enter the
correct numbers.
DISPLAY
a
b
c
Note:
d
This function may not work on some disc or titles.
e
f
Watching from a different angle
BD
DVD
If the disc contains scenes recorded at different camera angles, you can
change to a different camera angle during playback.
During playback, press DISPLAY to display the playback menu. Use v V
to select the [Angle] option, then use b B to select desired angle.
aTitle/Track – Current title/track number/total number of titles/tracks.
bChapter – Current chapter number/total number of chapters.
cTime – Elapsed playing time.
dAudio – Selected audio language or channel.
eSubtitle – Selected subtitle.
fAngle – Selected angle/total number of angles.
Notes:
•
If no button is pressed for a few seconds, the on-screen display
disappears.
•
•
•
A title number cannot be selected on some discs.
An item may not be available on some discs or titles.
If BD interactive title is playing back, some setting information is
displayed on the screen but prohibited to be changed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 28
Tips:
Listening to music
• To go directly to any track or file and play, enter the track/file number
using the numbered buttons (0-9).
The player can play Audio CDs and MP3/WMA
files. Before playing MP3/WMA files, read
“MP3/WMA audio file requirement” on page 28.
• The playback may start automatically if the Audio CD inserted.
ON REMOTE
• Use v V b B to select a folder then press ENTER and you can view the
files in the folder. If you want to move to the upper or lower
directory, use v V to move to the desired directory.
• On the [MUSIC] menu, use red or blue button to move to the first or the
last file or track and green or yellow button to move to the previous or
next page.
• The equalizer indicator is not coupled with the music in play back.
• If there is impossible code to express in the file name, it may be
displayed as illegible.
1 Inserts an Audio CD or a disc/USB Flash
Drive containing MP3/WMA files.
–
2 Displays the [Home Menu]:
3 Selects the [Music] option:
4 Selects a music from the [MUSIC] menu:
5 Plays the selected music:
6 Stops the playback:
HOME
b B, ENTER
v V b B
PLAY (N)
STOP (x )
MP3/WMA audio file requirement
File extensions: “.mp3”, “.wma”
Sampling frequency: within 8-48 kHz (WMA), within 11-48 kHz (MP3)
Bit rate: within 8-320 kbps (WMA, MP3)
CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder: Less than 2000 (total number of files and fold-
ers)
Notes on MP3/WMA file
• Depending on the size and number of the MP3/WMA files, it may take
several minutes to read the contents of the media.
• This unit cannot support the ID3 Tag embedded in the MP3 file.
• The total playback time indicated on the screen may not correct for
VBR files.
Example) MP3 files
Notes:
• When the USB Flash Drive is connected and a disc is inserted
simultaneously, the menu for selecting a media will appear. Select a
media then press ENTER.
• You can use various playback functions. Refer to pages 24-26.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 29
Options during viewing a photo file in full screen
You can use various options during viewing a picture in full screen.
Viewing a photo
This unit can play a photo files. Before playing
Use v V b B to select an option and use the options as described below.
photo files, read “Photo file requirement” on page
30.
ON REMOTE
a
1 Inserts a disc/USB Flash Drive containing
photo files.
–
2 Displays the [Home Menu]:
HOME
b c d e f g h
3 Selects a [Photo] option:
b B, ENTER
v V b B
ENTER
4 Selects a photo from the [PHOTO] menu:
5 Displays the selected photo in full screen:
6 Displays the next or previous photo:
7 Returns to the [PHOTO] menu screen:
aUse b B to advance to the previous or next file.
bPress ENTER to start or pause the slide show.
. / >
STOP (x )
cPress ENTER to play or pause the background music. This option
is available after the background music is selected using
[Music Select] option.
dSelects the background music.
1) Press ENTER and the menu will appear.
2) Use v V b B to select a media or folder that there are music
file(s).
3) Press ENTER to confirm your selection.
ePress ENTER to rotate the picture clockwise.
This option is not available during slide show.
fUse green or yellow buttons to zoom in or out of the picture.
You can move through the zoomed picture using v V b B buttons.
Press RETURN to exit the [Zoom] menu and return to the normal
picture size.
Notes:
•
When the USB Flash Drive is connected and a disc is inserted
simultaneously, the menu for selecting a media will appear. Select a
media then press ENTER.
• The zoom function can be operated by the ZOOM button on the
remote control.
•
•
You can start the slide show by pressing PLAY (N) while photo file is
selected in the [PHOTO] menu.
On the [PHOTO] menu, use red or blue button to move to the first or
the last file and green or yellow button to move to the previous or next
page.
gUse v V to select an option between [Effect] or [Delay].
Use b B to adjust and press ENTER to set the selected option.
[Effects] – You can apply various effects during a photo slide show.
Off : Slide Show without any effect.
Random : Slide show effects are applied randomly.
Slide : Reveals a photo in a sliding motion from various
directions.
•
You can change the content list view by pressing DISPLAY repeatedly.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 30
Door : Photo will be appear like door opening.
Lattice : Photo will be appear from tiled pieces to full screen
image
Playing a DVD VR Format Disc
This unit will play DVD-RW disc that is recorded
using the Video Recording (VR) format.
[Delay] – You can set the photo delaying time while Slide Show
ON REMOTE
hPress ENTER to exit the option menu.
1 Insert a VR disc:
The [MOVIE] menu appears on the screen.
–
To access the menu again, press ENTER.
Tips:
2 Selects a movie from the [MOVIE] menu:
3 Plays the selected movie:
b B
•
For the files that are contained in a disc or USB Flash Drive, you can
enter the file number using the numbered buttons (0-9) to go directly to
a specific file.
PLAY (N)
STOP (x )
4 Stops the playback:
•
•
•
You can advance to the previous or next file by pressing . or >
during viewing a photo file in full screen.
You can start the slide show without option menu by pressing
PLAY (N) during viewing a photo file in full screen.
Use v V b B to select a folder then press ENTER and you can view
the files in the folder. If you want to move to the upper or lower directo-
ry, use v V to move to the desired directory.
Notes:
• You can use various playback functions. Refer to pages 24-26.
• On the [MOVIE] menu, use red or blue button to move to the first or the
last file or track and green or yellow button to move to the previous or
next page.
•
If there is impossible code to express in the file name, it may be
displayed as illegible.
• Unfinalized DVD VR format discs may not be played in this player.
• Some DVD-VR disc are made with CPRM data by DVD RECORDER.
This unit cannot support these kinds of discs.
Photo file requirement (USB/DISC)
File extensions: “.jpg”, “.jpeg”, “.png”
What is CPRM?
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
CPRM is a copy protection system (with scramble system) only allowing
the recording of ‘copy once’ broadcast programs. CPRM stands for
Content Protection for Recordable Media.
CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Maximum Files/Folder: Less than 2000 (total number of files and fold-
ers)
Notes on Photo file
• Progressive and lossless compression photo image files are not
supported.
• Depending on the size and number of the photo files, it may take
several minutes to read the contents of the media.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 31
Setting up the remote to control your TV
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate manufacturer
code.
Reference
Controlling a TV with the Supplied Remote Control
You can control the volume, input source, and power state of your TV with
the supplied Remote Control.
While holding down TV POWER button, and press the manufacturer code
for your TV with the numerical buttons (see the table below).
Release the TV POWER button to complete setting.
You can control your TV using the buttons below.
TV
Manufacturer
LG / GoldStar
Zenith
Code Number
POWER
1 (Default), 2
TV Control Buttons
1, 3, 4
6, 7
8, 9
4
Samsung
Sony
Hitachi
Depending on your TV, some or all buttons may not function on the TV,
even after entering the correct manufacturer code. When you replace the
batteries of the remote, the code number you have set may be reset to the
default setting. Set the appropriate code number again.
SCAN
SKIP
By pressing
TV POWER
AV/INPUT
You can
Turn the TV on or off.
Resetting the unit
If you observe any of the following symptoms.
Switch the TV’s input source between the
TV and other input sources.
•
•
•
The unit is plugged in, but the power will not turn on or off.
The front panel display is not working.
The unit is not operating normally.
PR/CH +/-
Scan up or down through memorized
channels.
VOL +/–
Adjust the volume of the TV.
You can reset the unit as follows.
TV MUTE
Temporarily turns TV sound OFF, press
again to restore.
•
Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
Unplug the power cord, wait at least five seconds, and then plug it in
again.
•
Note:
Depending on the unit being connected, you may not be able to control
your TV using some of the buttons.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 32
Language Codes
Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Italian
Ukrainian
Urdu
Japanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Bulgarian
Burmese
Byelorussian
Chinese
Latvian, Lettish
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
Area
Code
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Code
Area
Code
Area
Code
LK
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
GL
HK
HU
IN
ID
IL
MV
MX
MC
MN
MA
NP
NL
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
PY
PH
PL
PT
RO
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
IT
SA
SN
SG
SK
SI
ZA
KR
ES
Uganda
Ukraine
Brazil
JM
JP
KE
KW
LY
LU
MY
Cambodia
Canada
Chile
China
Colombia
Congo
NZ
NG
NO
OM
PK
PA
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
FI
FR
DE
GB
GR
Oman
Pakistan
Panama
32
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 33
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet securely.
No power.
• No disc is inserted.
• Insert a disc.
The power is on, but the
player does not work.
• The TV is not set to receive video signal output.
• The video cable is not connected securely.
No picture.
No sound.
• Select the appropriate video input mode on the TV.
• Connect the video cable securely.
• The selected resolution is not capable with your TV.
• Select another resolution using RESOLUTION button.
• The equipment connected with the audio cable is not
set to receive disc signal output.
• Select the correct input mode of the audio receiver so you
can listen to the sound from the player.
•
The power of the equipment connected with the audio
cable is turned off.
• Turn on the equipment connected with the audio cable.
• The [AUDIO] options are set to the wrong position.
• Set the [AUDIO] options to the correct position
(see page 21).
• The player is in reverse play, fast forward, slow motion
or pause mode.
• Return to the normal playback.
• The disc is upside down.
The player does not start
playback.
• Insert the disc with the playback side down.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type and regional
code.)
• The rating level is set.
• Change the rating level.
• The disc was recorded on another unit and was not
finalized.
• Finalize the disc on that unit.
• The Remote Control is not pointed at the remote
sensor on the player.
The Remote Control does
not work properly.
• Point the Remote Control at the remote sensor of the
player.
• The Remote Control is too far from the player.
• Operate the Remote Control closer to the player.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 34
System
Specifications
Laser:
Semiconductor laser,
wavelength: 405nm / 650 nm
General
Power requirements:
Power consumption:
Dimensions (W x H x D):
AC 120 ~, 60 Hz
23 W
Signal system:
Standard NTSC colour TV system
Frequency response:
20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Approx. 16.9 x 1.4 x 7.9 inches
(430 x 35 x 200 mm) without foot
Signal-to-noise ratio:
More than 100 dB
(ANALOG OUT connectors only)
Net Weight (Approx.):
Operating temperature:
Operating humidity:
6 lbs (2.7 kg)
Harmonic distortion:
Dynamic range:
Accessories
Less than 0.008 %
More than 95 dB
41 °F to 95 °F (5 °C to 35 °C)
5 % to 90 %
Outputs
Video/Audio cable, Remote control (1), Battery (1)
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1
Customer Support
HDMI OUT (video/audio):
ANALOG AUDIO OUT:
19 pin (HDMI standard, Type A)
You can update the Player using the latest software to enhance the
products operation and/or add new features.
To obtain the latest software for this player (if updates have been made),
care centre.
2.0 Vrms (1 kHz, 0 dB), 600 Ω,
RCA jack (L, R) x 1
DIGITAL OUT (COAXIAL): 0.5 V (p-p), 75 Ω, RCA jack x 1
ꢀ Design and specifications are subject to change without notice.
Input
USB IN:
4 pin (USB 1.1/2.0 standard)
Bus power supply (USB): DC 5 V
500 mA
34
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 35
• libcurl library : Copyright © 1996 - 2008, Daniel Stenberg,
Open source software notice
• boost C++ library : © Copyright Beman Dawes 1999-2003
• UPnP SDK : Copyright © 2000-2003 Intel Corporation
• Libpcap
The following GPL executables and LGPL libraries used in this product are
subject to the GPL2.0/LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, dhcpcd, mtd-utils,
net-tools, procps, sysutils, tinylogin
This product includes other open source software.
LGPL LIBRARIES: uClibc, DirectFB, iconv, cairo, gnutls, libcrypt, libgpg-
err, libusb
• Copyright © David L. Mills 1992-2006
• Copyright © 1998-2003 Daniel Veillard.
gSOAP Public License 1.3 LIBRARY: gsoap
• Copyright © 1998, 1999 Thai Open Source Software Center Ltd.
• Copyright © 1990 The Regents of the University of California.
• Copyright © 1998-2005 The OpenSSL Project.
• Copyright © 1995, 1996 Michael Elizabeth Chastain
LG Electronics offers to provide source code to you on CD-ROM for a
charge covering the cost of performing such distribution, such as the cost
of media, shipping and handling upon e-mail request to LG Electronics at:
This offer is valid for a period of three(3) years from the date of the distrib-
ution of this product by LG Electronics.
You can obtain a copy of the GPL, LGPL licenses from
Also you can obtain a copy of gSOAP public license from
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
sell copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
This software is based in part on the work of the Independent JPEG Group
copyright © 1991 - 1998, Thomas G. Lane.
This product includes
• Freetype library : copyright © 2003 The FreeType Project
(www.freetype.org).
• libpng library : copyright © 2004 Glenn Randers-Pehrson
• Zlib compression library: Copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICU-
LAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CON-
TRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON-
NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
• Expat library : copyright © 2006 expat maintainers.
• OpenSSL library :
– software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (http://www.openssl.org)
Download from Www.Somanuals.com. All Manuals Search And Download.
BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 36
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the war-
ranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only
to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
PARTS: One Year from the Date of Purchase.
Call 1-800-243-0000
replaced.
Please retain dated sales receipt and your box to return the unit to LG for repair
or replacement.
Shipping both ways will be paid by LG during the Warranty Period. After the
Warranty Period, you pay inbound shipping charges and LG pays return shipping
charges.
for instructions on getting the defective unit repaired or
*
Parts replaced are warranted for the remaining portion of the original warranty
period.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDI-
RECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMI-
TATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CON-
TRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied
warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that may
vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate
system components; and
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the
requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect elec-
trical current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial
use, or other causes not arising out of defect in material or workmanship.
•
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy, Product Assistance, or
Customer Assistance
Call
(24 hours a day, 365 days per year) and select appropriate
1-800-243-0000
options from the menu.
Or visit our web site at http://us.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|