User’s Guide
M4710C
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Electrical Power Related Precautions
Warning
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
In the presence of thunder and lightning, never touch the power cord and signal cable because it can be
very dangerous.
- It can cause electric shock.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry
the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily
accessible after installation.
Main power breaker is the power cord and this breaking device must be located at a location where it is easy
to operate.
Caution
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center
for repair.
Precautions in Using the Product
Warning
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
Caution
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Name of the Remote Control Buttons
•
•
Power On/Off Button
Input Select Button
(See next page)
•
AV Button
•
ARC button
•
Sleep Button
When watching AV/S-Video/RGB/HDMI
Component1/ Component2
To select the image size of the
screen.
•
Automatic adjustment function
(Operational for the analog signal only)
/
The product will be automatically turned
off after a certain period of time.
Press this button repetitively to
select an appropriate time duration
Auto Button
1
4
7
2
5
8
0
3
6
9
•
PSM Button
- Automatically adjusts the image.
Press this button repetitively to set
the intended screen.
There is not a function
which is supported
There is not a function
which is supported
There is not a function
which is supported
•
Exit Button
•
Menu Button
•
UP and Down buttons
Bring up and down direction
•
•
Volume
Check Button
Button
adjustment.
*
•
Mute button
There is not a function
which is supported
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
•
AV Button
•
Input Select Button
Each time you press the Input
button it will change to
If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
AV
Component1
Component2
HDMI/DVI
RGB
using the
button.
1
4
7
2
5
8
0
3
6
9
Input
*
Inserting batteries into remote control.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and Function of the Parts
* The product image in the user’s guide could be different from the actual image.
Rear View
REMOTE
CONTROL IN
RS-232C
(CONTROL&
SERVICE)
HDMI/DVI IN
RGB IN
AUDIO
(RGB/DVI)
COMPONENT IN
VID
AV IN
L-AUDIO-R
VIDEO
L-AUDIO-R
Y
P
B
P
R
OUT
1
2
RGB OUT
S-VIDEO
AV
IN
OUT
RS-232C
(CONTROL&
SERVICE)
HDMI/DVI IN
RGB IN
REMOTE
CONTROL IN
AUDIO
(RGB/DVI)
COMPONENT IN
AV IN
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
Y
P
B
P
R
OUT
1
2
RGB OUT
S-VIDEO
AV
IN
OUT
Power Connector : Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
RGB, HDMI/DVI Ports
PC Sound Jack
: Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that
the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of
PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using
the card jumper of the program (Refer to the Sound Card Manual).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
When Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
When connecting with the D-Sub signal input cable.
A
B
When connecting with the HDMI to DVI signal input cable (not included).
A
RGB IN
PC
Rear side of the product.
PC/MAC
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
HDMI/DVI IN
B
(not included)
Rear side of the product.
PC
Connect the Audio cable.
AUDIO
(RGB/DVI)
Rear side of the product.
PC
Connect the power cord.
Rear side of the product.
REMOTE
CONTROL IN
RS-232C
(CONTROL&
SERVICE)
HDMI/DVI IN
RGB IN
AUDIO
(RGB/DVI)
COMPONENT IN
VIDEO
AV IN
L-AUDIO-R
VIDEO
L-AUDIO-R
Y
P
B
P
R
1
2
OUT
IN
RGB OUT
S-VIDEO
AV
OUT
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
1
Turn on power by pressing the power button on the product.
SOURCE
AUTO/SET
ON/OFF
Power button
Turn on the PC.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
SET
Or, press the SOURCE button on the back of the product.
Input
Input
SOURCE
AUTO/SET
When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
A
B
When connecting with a HDMI to DVI signal input cable.
• Select HDMI/DVI : HDMI to DVI Digital signal.
•
•
How to connect to two computers.
Note
Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
Watching RGB Outputs
Use this function when displaying ANALOG RGB inputs of a PC to the other product.
•
To use different products connected to each other
Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT
connector of product 1 and connect the other end to the RGB IN connector of other
products.
15-pin D-Sub Signal Cable
RGB IN
RGB IN
RGB IN
RGB IN
RGB OUT
RGB OUT
RGB OUT
RGB OUT
PC
PC
Product 2
Product 3
Product 4
Product 1
Note
• When multi-connecting in/out cascade format, no loss cables are recommended.
We recommend that you should use cable distributor.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
When watching VCR / DVD
Connect the video cable as shown in the below figure and then connect the power
cord (See page 7).
When connecting with a S-Video cable.
When connecting with a BNC cable.
A
B
•
Connect to the S-Video input terminal to
•
Connect the input terminal with a
watch high image quality movies.
proper color match.
Product
Product
AV IN
AV IN
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
S-VIDEO
S-VIDEO
AV
OUT
AV
OUT
Audio Cable
(not included)
Audio Cable
(not included)
BNC Cable
(not included)
S-Video Cable
(not included)
VCR/DVD Receiver
Select an input signal.
VCR/DVD Receiver
Press the INPUT button on the remote control to select the input signal.
INPUT
SET
Input
Or, press the SOURCE button on the back of the product.
SOURCE
AUTO/SET
When connecting with an BNC cable.
A
B
•
Select AV.
When connecting with an S-Video cable.
Select AV.
•
Note
• When the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i)
Connect the video/audio cable as shown in the below figure and then, connect the
power cord (See page 7).
•
Connect the input terminal with a proper color match.
A
B
Product
Product
COMPONENT IN
VIDEO
COMPONENT IN
L-AUDIO-R
Y
P
B
P
R
VIDEO
B
L-AUDIO-R
Y
P
P
R
1
2
1
2
Audio Cable
(not included)
BNC Cable
(not included)
Audio Cable
(not included)
BNC Cable
(not included)
HDTV Receiver
HDTV Receiver
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
SET
Or, press the SOURCE button on the back of the product.
Input
Input
SOURCE
AUTO/SET
•
•
Select Component 1
A
B
Select Component 2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
When watching HDMI/DVI/RGB from the VCR/DVD/Set-top Box
(480p/576p/720p/1080i)
Connect the video/audio cable as shown in the below figure and then connect the
power cord (See page 7).
Product
Product
Product
RGB IN
HDMI/DVI IN
AUDIO
(RGB/DVI)
A
HDMI/DVI IN
RGB IN
AUDIO
(RGB/DVI)
HDMI/DVI IN
RGB IN
AUDIO
(RGB/DVI)
B
RGB OUT
RGB OUT
HDMI to DVI
Signal Cable
(not included)
D-Sub Signal
Cable
RCA-PC
Audio Cable
RCA-PC
Audio Cable
HDMI Signal Cable
(not included)
VCR/DVD/Set-top Box
VCR/DVD/Set-top Box
VCR/DVD/Set-top Box
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
SET
Or, press the SOURCE button on the back of the product.
SOURCE
AUTO/SET
Input
Input
A
B
When connecting with a HDMI to DVI signal input cable.
When connecting with a HDMI signal input cable.
• Select HDMI/DVI
When connecting with a D-Sub signal input cable.
• Select RGB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
Watching AV Outputs
•
When you set the input signal of the main screen as 'AV (CVBS)', you can transmit the signal that
you're watching to the AV output terminal.
Video/TV
BNC Cable
(not included)
Audio Cable
(not included)
AV IN
VIDEO
-AUDIO-
Product
S-VIDEO
AV
OUT
Audio Cable
(not included)
BNC Cable
(not included)
Video/TV
Note
• When multi-connecting in/out cascade format, no loss cables are recommended.
We recommend that you should use cable distributor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To arrange cables using cable management
* Applicable only for models that support the stand.
Arrange the cables in the center as shown in the following picture.
1.
1
OUT
RGB OUT
S-VIDEO
AV
OUT
IN
2
2. Fit the cable management to the Holder Groove downwards.
SERVICE)
1
OUT
RGB OUT
S-VIDEO
AV
OUT
IN
2
cable
management
* When you want remove it.
Hold the Cable management with both
hands and pull it downward.
Warning
• Do not use the cable management as a handle for the Monitor.
• Do not press the cable management.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
SOURCE
AUTO/SET
ON/OFF
SOURCE
AUTO/SET
ON/OFF
• Press this button to turn on the power. Press this button again to
turn it off.
Power Button
• This Indicator lights up blue when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
colour changes to amber.
Power Indicator
MENU Button
• Use this button to show/hide the OSD (On Screen Display) menu
screen.
• Use this button to select an icon or adjust the setting in the OSD screen.
• Adjust the up and down.
OSD Select /
Adjust Button
• Adjust the volume.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
[For PC Analog signal]
AUTO/SET Button
Auto in progress
For opimal display change
resolution to 1360 X 768
[When XGA Mode is active and
1360 X768 is selected]
SOURCE Button
SOURCE
• Select the input signal
AUTO/SET
Input
AV
Composite Video, Separate Video
Component 1 HDTV, DVD
Component 2 HDTV, DVD
RGB
15-pin D-Sub analog signal
HDMI/DVI
Digital signal
• The unit that receives the signal from the remote control.
IR Receiver
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
OSD Menu
Icon
Function Description
Adjusts screen brightness, contrast and color that you prefer.
PICTURE
SOUND
Adjusts the audio function.
Adjusts the timer function.
TIMER
Adjusts the screen status according to the circumstances.
Adjusts the screen video.
SPECIAL
SCREEN
Note
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides
graphical presentation.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
How to adjust the OSD (On Screen Display) screen
Save
adjustment
Pops up
the menu
screen
Move where
you want to
adjust
Move where
you want to
adjust
Exit from the
menu screen.
Select a
menu icon
Select a
menu icon
Adjust the status
•
Use the remote control to adjust the OSD screen.
Press the MENU Button, then the main menu of the OSD appears.
1
2
3
4
5
6
To access a control, use the
Buttons.
When the icon you want becomes highlighted, press the SET Button.
Use the
Buttons to adjust the item to the desired level.
Accept the changes by pressing the SET Button.
Exit the OSD by pressing the EXIT Button.
How to adjust the screen automatically
You need to adjust the screen display when connecting the product to
a new computer or changing the mode. Refer to the following section to
set an optimal product screen.
[When XGA Mode is active and
1360 X768 is selected]
Press the AUTO/SET button (AUTO button in a remote Control) in the
PC analog signal. Then, an optimal screen status will be selected that
fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Adjusting Screen Color
PSM
CSM
Advanced
Reset
The PSM function automatically adjusts the screen image quality
depending on the AV usage environment.
PSM
• Dynamic : Select this option to display with a sharp image.
• Standard : The most general and natural screen display status.
• Mild : Select this option to display with a mild image.
• User1,2 : Select this option to use the user-defined settings.
User1
100
50
Contrast
Brightness
Colour
50
50
0
Sharpness
Tint
R
G
Contrast : Adjust the difference between the light and dark levels in the picture.
Brightness : To adjust the brightness of the screen.
Colour : To adjust the color to desired level.
Sharpness : To adjust the clearness of the screen.
Tint :To adjust the tint to desired level.
Selecting a factory setting color set.
• Warm : Slightly reddish white.
• Normal : Slightly bluish white.
CSM
• Cool : Slightly purplish white.
• User : Select this option to use the user-defined settings.
Red / Green / Blue
Set your own color levels.
User
0
0
0
Red
Green
Blue
Note
If the 'PSM' setting in the PICTURE menu is set to Dynamic, Standard or Mild the
subsequent menus will be automatically set.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Adjusting Screen Color
XD is LG Electronics' unique picture improving technology that displays a real HD source
through an advanced digital signal processing algorithm.
XD
This function is not available in RGB-PC or HDMI/DVI PC modes.
This menu is activated after selecting User1 or User2 of PSM.
PSM
CSM
Auto
Manual
XD Contrast
On
On
Advanced
Reset
XD Colour
XD NR
Off
0
MPEG NR
• Auto : XD is automatically changed to Auto.
• Manual : When selecting the Manual, you can adjust the XD Contrast, XD Colour, XD NR,
MPEG NR.
• XD Contrast : Optimizing the contrast automatically according to the
brightness of the reflection.
• XD Colour : Adjusting the colors of the reflection automatically to
reproduce as closely as possible to natural colors.
• XD NR : Removing the noise up to the point where it does not damage the
original picture.
• MPEG NR : You can select MPEG NR to reduce the picture noise which
may appear on the screen while watching the AV.
Advanced
PSM
CSM
Cinema
Off
Advanced
Black level
Reset
Low
• Cinema : (Function works in the following mode - AV, Component 480i/576i)
When you watch the movie, this function adjusts the set to the best picture
appearance.
• Black Level : (Function works in the following mode - AV(NTSC), HDMI/DVI
adjusts the contrast and the brightness of the screen using the
black level of the screen.
• Low : The reflection of the screen gets brighter.
• High : The reflection of the screen gets darker.
• Auto : Realizing the black level of the screen and set it to High or Low
automatically. (Europe an version only)
Return PSM, CSM, XD, Advanced to the default factory settings.
Reset
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Adjusting the audio function
SSM
AVL
Balance
Speaker
0
SSM
The best sound tone quality will be
selected automatically depending on the
video type that you're currently watching.
SSM
AVL
Surround MAX
Flat
Balance
Speaker
0
Music
Movie
Sports
User
• Surround MAX : Set the Surround MAX on. This function plays back the mono or stereo sound input
with the dynamic surround effects. It will provide rich and profound sound tone. If you set the
Surround MAX on, user audio setting can not be adjusted.
• Flat : The most commanding and natural audio.
• Music : Select this option to enjoy the original sound when listening to the music.
• Movie : Select this option to enjoy sublime sound.
• Sports: Select this option to watch sports broadcasting.
• User : Select this option to use the user-defined audio settings.
User
120Hz
200Hz
500Hz
1.2KHz
3KHz
7.5KHz
12KHz
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
AVL
Use this function to balance sound from the left and right speakers.
Balance
Speaker
You can adjust internal speaker status.
If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
Note
When connected to your computer and the 'SSM' setting in the audio menu is Flat, Music, Movie
or Sports, the available menus are Balance, AVL and Surround MAX
.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Adjusting the timer function
Clock
Off time
On time
Auto sleep
Power saving
Clock
If the time is on the clock is incorrect, reset the clock manually.
1) Press the MENU button and then use
button to select the TIME menu.
button to select the Clock menu.
button to set the hour(00~23).
2) Press the
3) Press the
4) Press the
button and then use
button and then use
button and then use
button to set the minutes(00~59).
Off / On time
The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use
button to select the TIME menu.
button to select Off time or On time.
button to set the hour(01~23).
button to set the minutes(00~59).
button to select On or Off.
2) Press the
3) Press the
4) Press the
5) Press the
button and then use
button and then use
button and then use
button and then use
Auto sleep
If Auto sleep is active and there is no input signal, the set switches to standby mode
automatically after 10 minutes.
1) Press the MENU button and then use
2) Press the button and then use
button to select the Auto sleep menu.
button to select On or Off.
As for power saving mode, the power consumption can be made by setting the power
consumption level at desired hour.
Power
saving
Note
In the event of power interruption (disconnection or power failure), the clock must be reset.
Once the on or off time is set, these functions operate daily at the preset time.
Off time function overrides On time function if they are set to the same time.
The set must be in standby mode for the On time to work.
When On time is operated, input screen is turned on as it was turned off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Selecting the options
Language
Child lock
ISM Method
Set ID
Tile Mode
Power Indicator
Logo light
Demo
Language
Child lock
To choose the language in which the control names are displayed.
Use the
buttons to select On or Off. The monitor can be set up so that it can only be
used with the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.
In order to unlock it, do the following :
•
Push the MENU button on the remote control and set Child lock to the 'Off' position.
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will
result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
ISM Method
Normal : If image sticking is never a problem, ISM is not necessary -set to Normal.
White wash : White wash removes permanent images from the screen.
(An excessive permanent image may be impossible to clear entirely with white wash.
Orbiter : May help prevent ghost images. However, it is best not to allow any fixed image to
remain on the screen. To avoid a permanent image on the screen, the screen will move every 2
minutes.
Inversion : This function inverts the panel colour of the screen. The panel colour is
automatically inverted every 30 minutes.
Orb.+Inv. : This function inverts the panel colour of the screen and may help prevent ghost
images. The panel colour is automatically inverted every 30 minutes and the screen will
move every 2 minutes.
Set ID
Language
Child lock
ISM Method
Set ID
1
Tile Mode
Power Indicator
Logo light
Demo
You can assign a unique Set ID NO (name assignment) to each product when several
products are connected for display. Specify the number (1~99) using the
button
and exit. Use the assigned Set ID to individually control each product using the Product
Control Program.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Selecting the options
•
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RS-232C or RGB Out
Tile mode
It is used to enlarge the screen and
also used with several products to
view screen.
Off
Off
0
Language
Child lock
Tile Mode
Natural
Tile ID
ISM Method
Set ID
H-Size
0
Tile Mode
Power Indicator
V-Size
0
H-Position
V-Position
Reset
Logo light
Demo
To set
• Tile Mode
Tile mode and choose Tile alignment and set the ID of the current product to set
location.
* Only after pressing the SET button the
adjustments made to the settings will be saved.
-
Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4)
- 4 x 4 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
-
Tile mode (product 1 ~ 4) : r(2) x c(2)
row
ID 1
ID 2
column
ID 3
ID 4
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Selecting the options
-
Tile mode (product 1 ~ 9) : r(3) x c(3)
row
ID 3
ID 6
ID 1
ID 2
ID 4
ID 5
column
ID 9
ID 7
ID 8
-
Tile mode (product 1 ~ 2) : r(2) x c(1)
row
ID 1
ID 2
column
-
Tile mode (product 1 ~16) : r(4) x c(4)
row
ID 4
ID 8
ID 2
ID 3
ID 1
ID 6
ID 7
ID 5
column
ID10
ID 11
ID 15
ID 9
ID 12
ID 16
ID 13
ID 14
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Selecting the options
Off
Off
0
Language
Child lock
Tile Mode
Natural
Tile ID
ISM Method
Set ID
H-Size
0
Tile Mode
Power Indicator
V-Size
0
H-Position
V-Position
Reset
Logo light
Demo
To set
The image is omitted by the distance between the screens to be naturally shown.
Select the location of the Tile by setting an ID.
• Natural
• Tile ID
• H Size
Adjust the horizontal size of the screen taking into account the size of the
bezel.
Adjust the vertical size of the screen taking into account the size of the bezel.
Moving the screen position horizontally.
• V Size
•
•
H-Position
V-Position
Moving the screen position vertically.
• Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns
to Full screen.
Use this function to set the power indicator on the front side of the product to
On or Off.
If you set Off, it will go off. If you set On at any time, the power indicator will
automatically be turned on.
Power
Indicator
Use this function to set the Logo Display Lamp on the front side of the product to On
or Off. If you set On, the lamp will automatically be turned on.
Logo Light
Demo
Use it to see the difference between XD demo on and XD Demo off.
(XD Demo function is not available in RGB PC/ HDMI/DVI PC mode.)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Adjusting Screen CLOCK/PHASE and Position
Auto config.
Manual config.
XGA Mode
ARC
Reset
This button is for the automatic adjustment of the screen position, clock and phase.
This function is suitable for analogue signal input only.
Auto-config.
(RGB PC
input only)
If the picture isn't clear after auto adjustment and characters are still trembling, adjust the
picture phase manually.
* Phase, Clock function are not available in RGB DTV, Component, HDMI/DVI DTV.)
Manual-
config.
To minimize any vertical bars or stripes visible on the screen
background. The horizontal screen size will also change. This function
is suitable for analogue signal input only
Clock
To adjust the focus of the display. This item allows you to remove any
horizontal noise and clear or sharpen the image of characters. This
function is suitable for analogue signal input only.
Phase
Moving the screen position horizontally.
Moving the screen position vertically.
H-Position
V-Position
For more improved or better picture quality, select the same mode corresponding to
computer resolution.
XGA Mode
(RGB-PC
only).
Auto config.
Manual config.
1024x768
XGA Mode
1280x768
ARC
1360x768
Reset
1366x768
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting and Adjusting the Screen
Adjusting Screen CLOCK/PHASE and Position
ARC
To select the image size of the screen.
Spectacle
When your AV receives the wide screen signal, it will lead you to
adjust the picture horizontally, in a nonlinear proportion, to fill the entire
screen.
When your AV receives the wide screen signal, it will lead you to adjust
the picture horizontally or vertically, in a linear proportion, to fill the entire
screen fully. (Europe an version only)
Full
When your AV receives the wide screen signal, it will be automatically
changed to picture format to be sent.
Original
This pIcture format is 4:3 of general AV.
4:3
You can enjoy movies (the picture format of 16:9) or general TV
programmes thorough 16:9 mode.
16:9
Programmes with 16:9 format are viewed naturally but 4:3 programmes
are magnified on the left and right so that the screen is16:9 format.
This pIcture format is 1:1 of general AV. (only RGB PC, HDMI/DVI PC)
1:1
You can enjoy the picture format of 14:9 or general AV programmes
through 14:9 mode.
14:9
Programmes with 14:9 are viewed naturally, but 4:3 programmes are
magnified on the top/bottom and left/right sides.
You can enjoy movies on a vast screen through Zoom mode.
The 4:3 programmes are magnified on the top/bottom and left/right sides
so that screen is 16:9 format. The bottom and top of the picture may be
lost.
Zoom1, 2
MODE
HDMI/DVI
RGB
AV
Component
ARC
DTV
DTV
PC
PC
Spectacle
Full
Original
4:3
16:9
14:9
Zoom1
Zoom2
1:1
Return Manual config. to the default factory settings.
Reset
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No image is displayed
ꢀ
Is the product power cord connected?
• See if the power cord is properly connected to the
outlet.
ꢀ
ꢀ
Is the power indicator light on?
• See if the power switch is turned on.
• Adjust brightness and contrast again.
Power is on, power indicator is blue but
the screen appears extremely dark.
ꢀ
ꢀ
the power indicator amber?
• If the product is in power saving mode, move the
mouse or press any key.
Does the 'Out of range' message
appear?
• The signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring
to the Specifications in this manual.
* Maximum resolution
RGB : 1600 x 1200 @60Hz
HDMI/DVI : 1280 x 1024 @60Hz
ꢀ
Does the 'Check signal cable' message
appear?
• The signal cable between PC and product is not
connected. Check the signal cable.
• Press the 'INPUT' menu in the remote Control to
check the input signal.
'Unknown Product' message appears when the product is connected.
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com)
ꢀ
Did you install the driver?
• See if the plug&play function is supported by
referring to the video card user manual.
'Controls Locked' message appears.
• The control locking function prevents unintentional
OSD setting change due to careless usage. To unlock
the controls, simultaneously press the Menu button
and button for several seconds. (You cannot set this
function using the remote control buttons. You can set
this function in the product only.)
ꢀ
The 'Controls Locked' message
appears when pressing the Menu
button.
* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
Note
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The screen image looks abnormal.
ꢀ
Is the screen position wrong?
• D-Sub analog signal – Press the “AUTO” button in
the remote control to automatically select the
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Position OSD menu.
• See if the video card resolution and frequency are
supported by the product. If the frequency is out of
range, set to the recommended resolution in the
Control Panel – Display – Setting menu.
ꢀ
ꢀ
ꢀ
Do thin lines appear on the
background screen?
• D-Sub analog signal – Press the “AUTO” button
in the remote control to automatically select an
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Clock OSD menu.
Horizontal noise appears or the
characters look blurred.
• D-Sub analog signal – Press the “AUTO” button
in the remote control to automatically select an
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Phase OSD menu.
The screen is displayed abnormally.
• The proper input signal is not connected to the
signal port. Connect the signal cable that matches
with the source input signal.
After-image appears on the product.
ꢀ
After-image appears when the
product is turned off.
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screen-saver
function.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The audio function does not work.
ꢀ
No sound?
• See if the audio cable is connected properly.
• Adjust the volume.
• See if the sound is set properly.
• Select the appropriate equalize sound.
• Adjust the volume.
ꢀ
ꢀ
Sound is too dull.
Sound is too low.
Screen color is abnormal.
ꢀ
Screen has poor color resolution
(16 colors).
• Set the number of colors to more than 24 bits (true
color)
Select Control Panel – Display – Settings – Color
Table menu in Windows.
ꢀ
ꢀ
Screen color is unstable or mono- • Check the connection status of the signal cable.
colored.
Or, re-insert the PC video card.
Do black spots appear on the screen?
• Several pixels (red, green, white or black color)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The product specifications can change without prior notice for product improvement.
LCD Panel
47 inches (119.28 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Anti-Glare coating
Visible diagonal size: 119.28 cm
0.76125 mm X 0.76125 mm (Pixel Pitch)
Rated Voltage
Power Consumption On Mode
Sleep Mode
AC 100-240V~ 50/60Hz 3.0A
Power
: 300W Typ.
: ≤ 3W (RGB) / 4W(HDMI/DVI)
: ≤ 1W
Off Mode
Dimensions
&Weight
[2]
[1]
H
H
W
D
D
W
Width x Height x Depth
[1] 111.70 cm (43.98 inches) x 75.78 cm (29.83 inches) x 30.26 cm (11.91 inches)
[2] 111.70 cm (43.98 inches) x 66.10 cm (26.02 inches) x 11.87 cm (4.67 inches)
Net
[1] 33.3 kg (73.41 lbs)
[2] 28.7 kg (63.27 lbs)
NOTE
Information in this document is subject to change without notice.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The product specifications can change without prior notice for product improvement.
Max. Resolution
RGB : 1600 X 1200 @60Hz
Video Signal
HDMI/DVI : 1280 X 1024 @60Hz – It may not be supported
depending on the OS or video card type.
Recommended Resolution RGB : WSXGA 1360 X 768 @60Hz
HDMI/DVI : WSXGA 1360 X 768 @60Hz – It may not be
supported depending on the OS or video card type.
Horizontal Frequency RGB : 30 - 83 kHz
HDMI/DVI : 30 - 72 kHz
Vertical Frequency
56 - 85 Hz
Synchronization Type Separate/Composite/Digital
15-pin D-Sub type, HDMI (digital), S-Video,
Input Connector
Composite Video, Component, RS-232C
Operational Condition Temperature: 5˚C ~ 35˚C , Humidity: 10% ~ 80%
Environmental
Conditions
Storage Condition
Temperature: -20˚C ~ 60˚C , Humidity: 5% ~ 90%
NOTE
Information in this document is subject to change without notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PC Mode – Preset Mode
Vertical
Frequency
(Hz)
Vertical
Frequency
(Hz)
Horizontal
Frequency
(kHz)
Horizontal
Frequency
(kHz)
Preset mode
Preset mode
1
2
3
4
5
6
7
8
9
31.469
31.468
31.469
37.500
43.269
37.879
46.875
53.674
49.725
48.363
VGA
VGA
VGA
VESA
VESA
VESA
VESA
VESA
MAC
70
70
60
75
85
60
75
85
75
60
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
11 VESA 1024 x 768 60.123
12 VESA 1024 x 768 68.68
13 VESA 1280 x 720 44.772
14 VESA 1280 x 768 47
15 VESA 1360 x 768 47.72
16 VESA 1366 x 768 47
17 VESA1280 x 1024 63.981
18 VESA1280 x 1024 79.98
19 VESA1600 x 1200 75.00
75
85
60
60
60
60
60
75
60
10
VESA
RGB : Mode 1 ~ Mode 19
HDMI/DVI : Mode 1 ~ Mode 17
DTV Mode
HDMI/DVI(DTV)
Component
RGB(DTV)
480i
o
o
o
o
o
o
x
x
o
o
o
o
x
x
o
o
o
o
576i
480p
576p
720p
1080i
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off Mode
Blue
Amber
-
NOTE
DTV/PC selection on RGB and HDMI/DVI inputs is available for PC resolutions :
640 X 480/60Hz, 1280 X 720/60Hz and DTV resolutions : 480p, 720p.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
VESA wall mounting
Connected to another object (stand type and wall-mounted type.) This product accepts a VESA-
compliant mounting interface pad.- (This has to be purchased separately if required.)
For further information, refer to the VESA Wall Mounting Instruction Guide.
Kensington Security Slot- (This has to be purchased
separately if required.)
Connected to a locking cable that can be purchased
separately at most computer stores
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Use this method to connect several products to a single PC.
You can control several products at a time by connecting them to a single PC.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
* The RS-232C protocol is used for communication between the PC and product. You can
turn the product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C
(CONTROL &
SERVICE)
RS-232C Cable
(not included)
PC
monitor 1
monitor 3
monitor 4
monitor 2
RS-232C Configurations
3-Wire Configurations (Not Standard)
7-Wire Configurations (Standard RS-232C cable)
PC
Monitor
PC
Monitor
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Male)
D-Sub 9
(Female)
D-Sub 9
(Male)
Communication Parameter
Baud Rate : 9600buadRate (UART)
Data Length : 8bits
Parity Bit : None
Stop Bit : 1bit
Flow Control : None
Communication Code : ASCII code
Use a straight cable
A1
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Command Reference List
COMMAND1
COMMAND2
DATA(Hexa)
01. Power
k
k
k
k
k
k
k
k
k
k
k
k
k
k
a
b
c
d
e
f
g
h
i
j
k
l
m
t
00H - 01H
02H - 09H
01H - 09H
00H - 01H
00H - 01H
00H - 64H
00H - 64H
00H - 64H
00H - 64H
00H - 64H
00H - 64H
00H - 01H
00H - 01H
00H - 64H
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Color
10. Tint
11. Sharpness
12. OSD Select
13. Remote Lock/key Lock
14. Balance
15. Color Temperature
16. Abnomal state
k
k
u
z
00H - 03H
FFH
17. ISM mode
18. Auto configuration
19. Key
20. Tile Mode
21. Tile H Size
22. Tile V Size
23. Tile ID Set
24. Natural Mode (In Tilemode)
25. Elapsed time return
26. Temperature value
27. Lamp fault check
j
j
p
u
c
d
g
h
i
j
l
n
p
00H - 08H
01H
m
d
d
d
d
d
d
d
d
Key Code
00H - 44H
00H - 64H
00H - 64H
00H - 10H
00H - 01H
FFH
FFH
FFH
A2
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (j, k, m, d)
* [Command 2]: Second command.
* [Set ID]: Set up the Set ID number of product.
range : 1~99. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same
time, it should not be checked the ack message.
Because all sets will send the ack message, so it's impossible the check the
whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0x0D’
* [ ]: ASCII code Space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data.
If the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
A3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
01. Power(Command : a)
To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 0 : Power Off
1 : Power On
02. Input Select (Command : b) (Main Picture Input)
To select input source for the Set.
You can also select an input source using the SOURCE
button on the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 2 : AV
4 : Component 1
6 : RGB (DTV)
7 : RGB (PC)
8 : HDMI (DTV)
9 : HDMI (PC)
5 : Component 2
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 2 : AV
6 : RGB (DTV)
7 : RGB (PC)
8 : HDMI (DTV)
9 : HDMI (PC)
4 : Component 1
5 : Component 2
A4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
03. Aspect Ratio(Command : c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1 : Normal Screen (4:3)
2 : Wide Screen (16 :9)
3 : Horizon (Spectacle)
4 : Zoom1
5 : Zoom2
6 : Original
7 : 14 : 9
8 : Full (Europe version only)
9 : 1 : 1 (PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
04. Screen Mute(Command : d)
To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
1: Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
A5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
05. Volume Mute(Command : e)
To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume Mute On (Volume Off)
1: Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume Mute On (Volume Off)
1: Volume Mute Off (Volume On)
06. Volume Control(Command : f)
To adjust Volume .
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min : 00H ~ Max : 64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H ~ Max : 64H
•
Refer to ‘Real data mapping’ page A7.
A6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
07. Contrast(Command : g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min : 00H ~ Max : 64H
•
Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step 0
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100
08. Brightness(Command : h)
To adjust screen brightness.
You can also adjust the brightness in the Picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min : 00H ~ Max : 64H
•
Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100
A7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
09. Color(Command : i) (Video only)
To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min : 00H ~ Max : 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A7.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H ~ Max : 64H
10. Tint(Command : j) (Video only)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red: 00H ~ Green: 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A7.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red: 00H ~ Green: 64H
* Tint Real data mapping
0 : Step -50
:
64 : Step 50
A8
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
11. Sharpness(Command : k) (Video only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min : 00H ~ Max : 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A7.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H ~ Max : 64H
12. OSD Select(Command : l)
To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off
1 : OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD Off
1 : OSD On
13. Remote Lock /Key Lock (Command : m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Off
1 : On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : Off 1 : On
A9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
14 Balance(Command : t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min : 00H ~ Max : 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A7.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H ~ Max : 64H
* Balance : L50 ~ R50
15. Color Temperature (Command : u)
To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Normal
1 : Cool
2 : Warm
3 : User
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0 : Normal
1 : Cool
2 : Warm
3 : User
A10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
16. Abnomal state (Command : z)
Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
17. ISM mode(Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1 : Inversion
2 : Orbiter
3 : Orb.+Inv.
4 : White Wash
8 : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
A11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
18. Auto Configure(Command: j u)
To adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key(Command : m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to page A18.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
20. Tile Mode(Command : d d)
Change a Tile Mode.
Transmission
[d][d][][Set ID][][Data][x]
Data
Description
00
12
13
14
...
Tile mode is off.
1 x 2 mode(column x row)
1 x 3 mode
1 x 4 mode
...
44
4 x 4 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][][00][][OK/NG][Data][x]
A13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
21. Tile H Size(Command : d g)
To set the Horizontal size.
Transmission
[d][g][][Set ID][][Data][x]
Data
Min : 00H ~ Max : 64H
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
22. Tile V Size(Command : d h)
To set the Vertical size.
Transmission
[d][h][][Set ID][][Data][x]
Data
Min : 00H ~ Max : 64H
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
A14
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
23. Tile ID Set(Command : d i)
To assign the Tile ID for Tiling function .
Transmission
[d][i][][Set ID][][Data][x]
Data
Min : 00H ~ Max : 10H
(Hexadecimal code)
Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
24 Natural Mode (In Tilemode) (Command : d j)
The image is omitted by the distance between the screens to be naturally shown.
Transmission
[d][j][][Set ID][][Data][x]
Data 0 : Natural Off
1 : Natural On
ff : Read Status
Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
25. Elapsed time return(Command : d l)
To read the elapsed time.
Transmission
[d][l][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[l][][Set ID][][OK/NG][Data][x]
* The data means used hours.
(Hexadecimal code)
A15
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
26. Temperature value (Command : d n)
To read the inside temperature value.
Transmission
[d][n][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[n][][Set ID][][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
27. Lamp fault Check(Command : d p)
To check lamp fault.
Transmission
[d][p][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
Data 0 : Lamp Fault
1: Lamp OK
A16
Download from Www.Somanuals.com. All Manuals Search And Download.
IR Codes
RS-232C
How to connect
Connect your wired remote control to Remote Control port on the Product.
Remote Control IR Code
Output waveform
single pulse, modulated with 37.917KHz signal at 455KHz
Tc
Carrier frequency
FCAR = 1/Tc = fosc/12
Duty ratio = T1/Tc = 1/3
T1
Configuration of frame
•
1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
•
Repeat frame
Repeat code
Tf
Lead code
9ms
4.5ms
0.55ms
Repeat code
9ms
2.25ms
Bit description
•
Bit "0"
•
Bit "1"
0.56ms
0.56ms
1.12ms
2.24ms
Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
•
Tf
Tf
Tf=108ms@455KHz
A17
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
IR Codes
Code(Hexa) Function
Note
00
01
02
03
08
C4
C5
09
98
0B
0E
43
5B
6E
44
10
11
12
13
14
15
16
17
18
19
5A
BF
D4
D5
D7
C6
79
76
77
AF
99
L
R/C Button
R/C Button
R/C Button
R/C Button
M
VOL( )
VOL( )
POWER ON/OFF
POWER ON
POWER OFF
MUTE
PR/C Button (Power On/Off)
Discrete IR Code(Only Power On)
Discrete IR Code(Only Power On)
R/C Button
AV
R/C Button
INPUT
R/C Button
SLEEP
R/C Button
MENU
R/C Button
EXIT
R/C Button
PSM
R/C Button
SET
R/C Button
Number Key 0
Number Key 1
Number Key 2
Number Key 3
Number Key 4
Number Key 5
Number Key 6
Number Key 7
Number Key 8
Number Key 9
AV
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code(Input AV Selection)
Discrete IR Code(Input COMPONENT1 Selection)
Discrete IR Code(Input COMPONENT2 Selection)
Discrete IR Code(Input RGB PC Selection)
Discrete IR Code(Input RGB DTV Selection)
Discrete IR Code(Input HDMI/DVI Selection)
R/C Button
COMPONENT1
COMPONENT2
RGB PC
RGB DTV
HDMI/DVI
ARC
ARC (4:3)
ARC (16:9)
ARC (ZOOM)
AUTO CONFIC
Discrete IR Code(Only 4:3 mode)
Discrete IR Code(Only 16:9 mode)
Discrete IR Code(Only ZOOM1, ZOOM2 mode)
Discrete IR Code
A18
Download from Www.Somanuals.com. All Manuals Search And Download.
|