LG Electronics Blu ray Player BP125 User Manual

OWNER’S MANUAL  
Blu-ray Disc™/DVD Player  
Please read this manual carefully before operating  
your set and retain it for future reference.  
BP125 / BP125N  
P/NO : MFL67475811_1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
3
This device is equipped with a portable battery or  
accumulator.  
Disposal of waste batteries/accumulators  
1. When this crossed-out wheeled  
bin symbol is attached to batteries/  
accumulators of Your product it means  
they are covered by European Directive  
2006/66/EC.  
Safety way to remove the battery or the  
battery from the equipment: Remove the  
old battery or battery pack, follow the steps  
in reverse order than the assembly. To prevent  
contamination of the environment and bring on  
possible threat to human and animal health, the  
old battery or the battery put it in the appropriate  
container at designated collection points. Do  
not dispose of batteries or battery together with  
other waste. It is recommended that you use  
local, free reimbursement systems batteries and  
accumulators. The battery shall not be exposed to  
excessive heat such as sunshine, fire or the like.  
1
2. This symbol may be combined with  
chemical symbols for mercury(Hg),  
cadmium(Cd) or lead(Pb) if the  
battery Contains more that 0.0005%  
of mercury, 0.002% of cadmium or  
0.004% of lead.  
3. All batteries/accumulators should be  
disposed separately from the municipal  
waste stream via designated collection  
facilities appointed by the government  
or the local authorities.  
Disposal of your old appliance  
1. When this crossed-out wheeled bin  
symbol is attached to a product it  
means the product is covered by the  
European Directive 2002/96/EC.  
4. The correct disposal of Your old  
batteries/ accumulators will help  
to prevent potential negative  
consequences for the environment,  
animal and human health.  
2. All electrical and electronic products  
shall be disposed of separately  
from the municipal waste stream  
via designated collection facilities  
appointed by the government or the  
local authorities.  
5. For more detailed information  
about disposal of Your old batteries/  
accumulators, please contact Your  
city offi ce, waste disposal service or  
the shop where You purchased the  
product.  
3. The correct disposal of your old  
appliance will help prevent potential  
negative consequences for the  
environment and human health.  
4. For more detailed information about  
disposal of your old appliance, please  
contact your city office, waste disposal  
service or the shop where you  
purchased the product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Getting Started  
LG Electronics hereby declares  
that this/these product(s) is/are  
in compliance with the essential  
Notes on Copyrights  
Because AACS (Advanced Access Content  
System) is approved as content protection  
system for Blu-ray Disc format, similar to use of  
CSS (Content Scramble System) for DVD format,  
certain restrictions are imposed on playback,  
analog signal output, etc., of AACS protected  
contents. The operation of this product and  
restrictions on this product may vary depending  
on your time of purchase as those restrictions  
may be adopted and/or changed by AACS after  
the production of this product.  
y
requirements and other relevant provisions of  
Directive 2004/108/EC, 2006/95/EC and 2009/125/  
EC.  
1
European Standards Centre:  
Krijgsman 1, 1186 DM Amstelveen, The Netherlands  
Please note that this is NOT a Customer Service  
contact point. For Customer Service Information,  
see Warranty Card or contact the dealer that you  
purchased this product.  
y
Furthermore, BD-ROM Mark and BD+ are  
y
additionally used as content protection systems  
for Blu-ray Disc format, which imposes certain  
restrictions including playback restrictions for  
BD-ROM Mark and/or BD+ protected contents.  
To obtain additional information on AACS, BD-  
ROM Mark, BD+, or this product, please contact  
an authorized Customer Service Centre.  
Many BD-ROM/DVD discs are encoded with  
copy protection. Because of this, you should only  
connect your player directly to your TV, not to a  
VCR. Connecting to a VCR results in a distorted  
picture from copy-protected discs.  
y
y
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Rovi Corporation, and is intended  
for home and other limited viewing uses only  
unless otherwise authorized by Rovi Corporation.  
Reverse engineering or disassembly is prohibited.  
Under the U.S. Copyright laws and Copyright  
laws of other countries, unauthorized recording,  
use, display, distribution, or revision of television  
programs, videotapes, BD-ROM discs, DVDs, CDs  
and other materials may subject you to civil and/  
or criminal liability.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
5
Important Notice for TV colour  
system  
The colour system of this player differs according to  
currently playing discs.  
1
For example, when the player plays the disc  
recorded in the NTSC colour system, the image is  
output as an NTSC signal.  
Only the multi system colour TV can receive all  
signals output from the player.  
If you have a PAL colour system TV, you will see  
just distorted images when using discs or video  
contents recorded in NTSC.  
y
The multi system colour TV changes the colour  
system automatically according to input signals.  
In case that the colour system is not changed  
automatically, turn it off and then on to see  
normal images on screen.  
y
Even if the disc recorded in NTSC colour system  
are well displayed on your TV, these may not be  
recorded correctly on your recorder.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Table of Contents  
3
System Setting  
Table of Contents  
21  
Settings  
21 – Initial Setup  
21 – Adjust the Setup Settings  
22 – [DISPLAY] Menu  
23 – [LANGUAGE] Menu  
24 – [AUDIO] Menu  
25 – [LOCK] Menu  
1
Getting Started  
2
8
8
Safety Information  
Introduction  
– Playable Discs and symbols used in  
this manual  
26 – [OTHERS] Menu  
9
9
– About the “7” Symbol Display  
– Compatibility Notes  
4
Operating  
10 – File requirement  
11  
27 General Playback  
27 – Using [HOME] menu  
27 – Playing a Disc  
27 – Playing a file on disc/USB device  
28 – Basic operations for video and audio  
content  
28 – Basic operations for photo content  
28 – Using the disc menu  
29 – Resume playback  
– AVCHD (Advanced Video Codec High  
Definition)  
12 – Certain System Requirements  
12 – Regional Code  
12 – System Select  
13  
14  
14  
Remote control  
Front panel  
Rear panel  
29 – Last Scene Memory  
29 Advanced Playback  
29 – Repeat Playback  
30 – Repeating a specific portion  
30 – Viewing content information  
30 – Changing content list view  
31 – Selecting a subtitle file  
31 – Options while viewing a photo  
32 – Listening to music while slide show  
32 On-Screen display  
2
Connecting  
15  
15  
Connecting the AC Adapter  
Connecting to Your TV  
16 – What is SIMPLINK?  
17 – Resolution Setting  
18 Connecting to an Amplifier  
18 – Connecting to an Amplifier via HDMI  
Output  
19 – Connecting to an Amplifier via Digital  
Audio Output  
20 USB device connection  
20 – Playback content in the USB device  
32 – Displaying content information on-  
screen  
33 – Playing from selected time  
33 – Selecting a subtitle language  
34 – Hearing a different audio  
34 – Watching from a different angle  
34 – Changing the TV Aspect Ratio  
35 – Changing subtitle code page  
35 – Changing the Picture Mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
7
5
Troubleshooting  
36 Troubleshooting  
36 – General  
37 – Picture  
37 – Customer Support  
37 – Open source software notice  
1
6
Appendix  
2
3
4
5
6
38 Controlling a TV with the Supplied  
Remote Control  
38 – Setting up the remote to control your  
TV  
39 Area Code List  
40 Language code List  
41  
Trademarks and Licenses  
43 Audio Output Specifications  
45 Specifications  
46 Maintenance  
46 – Handling the Unit  
46 – Notes on Discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Getting Started  
Introduction  
1
Playable Discs and symbols used in this manual  
Media/Term  
Logo  
Symbol  
Description  
Discs such as movies that can be purchased or  
rented.  
y
e
BD-R/RE discs that are recorded in BDAV format.  
y
y
Blu-ray  
BD-R/RE discs that contain Movie, Music or  
Photo files.  
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
y
y
Discs such as movies that can be purchased or  
rented.  
r
Movie mode and finalized only  
Supports the dual layer disc also  
y
y
DVD-ROM  
DVD-R  
Finalized AVCHD format  
DVD-RW  
DVD+R  
o
DVD+RW  
(8 cm, 12 cm)  
DVD R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
DVD-RW (VR)  
(8 cm, 12 cm)  
VR mode and finalized only  
Audio CD  
r
t
Audio CD  
(8 cm, 12 cm)  
CD-R/RW discs that contain Movie, Music or  
Photo files.  
y
y
y
u
i
CD-R/RW  
(8 cm, 12 cm)  
ISO 9660+JOLIET, UDF and UDF Bridge format  
Indicates special notes and operating features.  
Note  
,
>
Indicates cautions for preventing possible  
damages from abuse.  
Caution  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
9
Note  
,
About the “ ” Symbol Display  
7
Depending on the conditions of the  
recording equipment or the CD-R/RW (or  
DVD R/RW) disc itself, some CD-R/RW (or  
DVD R/RW) discs cannot be played on the  
unit.  
y
7may appear on your TV display during  
operation and indicates that the function explained  
in this owner’s manual is not available on that  
specific media.  
1
Depending on the recording software & the  
finalization, some recorded discs (CD-R/RW,  
DVD R/RW, BD-R/RE) may not be playable.  
y
y
Compatibility Notes  
Because BD-ROM is a new format, certain disc,  
digital connection and other compatibility issues  
are possible. If you experience compatibility  
problems, please contact an authorized  
Customer Service Center.  
y
BD-R/RE, DVD R/RW and CD-R/RW discs  
recorded using a personal computer or a  
DVD or CD Recorder may not play if the  
disc is damaged or dirty, or if there is dirt or  
condensation on the player’s lens.  
This unit allows you to enjoy functions such  
as picture-in-picture, secondary audio and  
Virtual packages, etc., with BD-ROM supporting  
BONUSVIEW (BD-ROM version 2 Profile 1 version  
1.1). Secondary video and audio can be played  
from a disc compatible with the picture-in-  
picture function. For the playback method, refer  
to the instructions in the disc.  
y
If you record a disc using a personal  
computer, even if it is recorded in a  
compatible format, there are cases in which  
it may not play because of the settings of  
the application software used to create the  
disc. (Check with the software publisher for  
more detailed information.)  
y
This player requires discs and recordings to  
meet certain technical standards in order to  
achieve optimal playback quality.  
y
y
Viewing high-definition content and up-  
converting standard DVD content may require a  
HDMI-capable input or HDCP-capable DVI input  
on your display device.  
y
Pre-recorded DVDs are automatically set to  
these standards. There are many different  
types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions  
to ensure compatible playback.  
Some BD-ROM and DVD discs may restrict the  
use of some operation commands or features.  
y
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are  
supported with maximum 7.1 channels if you  
use HDMI connection for the audio output of the  
unit.  
Customers should note that permission  
is required in order to download MP3 /  
WMA files and music from the Internet.  
Our company has no right to grant such  
permission. Permission should always be  
sought from the copyright owner.  
y
y
You can use a USB device to store some disc  
related information. The disc you are using will  
control how long this information is retained.  
y
You have to set the disc format option  
to [Mastered] in order to make the discs  
compatible with the LG players when  
formatting rewritable discs. When setting  
the option to Live System, you cannot use  
it on LG player. (Mastered/Live File System :  
Disc format system for windows Vista)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Getting Started  
File requirement  
Movie files  
1
File  
Location  
File  
Extension  
Codec Format  
Audio Format  
Subtitle  
.avi, “.divx,  
.mpg, “.mpeg, DIVX5.xx, DIVX6.xx  
DIVX3.xx, DIVX4.xx,  
Dolby Digital,  
DTS, MP3,  
AAC, AC3,  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), VobSub  
(.sub), SubViewer 1.0 (.sub),  
SubViewer 2.0 (.sub/.txt), TMPlayer  
(.txt), DVD Subtitle System (.txt)  
.mkv, “.mp4,  
.asf, “.wmv,  
.m4v(DRM  
free), .vob,  
.3gp, “.flv”  
(standard playback  
only), XVID, MPEG1 SS, WMA  
H.264/MPEG-4 AVC,  
MPEG2 PS, MPEG2 TS,  
VC-1 SM (WMV3)  
Disc,  
USB  
Music files  
File  
Location  
File  
Extension  
Sampling Frequency  
Bitrate  
within 32 - 192  
kbps (WMA), within not supported on this  
32 - 320 kbps (MP3) player.  
Note  
.mp3, “.wav,  
.wma, “.m4a”  
(DRM free),  
.flac”  
within 32 - 48 kHz  
(WMA), within 16 - 48  
kHz (MP3)  
Some wav files are  
Disc,  
USB  
Photo files  
File  
Location  
File  
Extension  
Recommended  
Size  
Note  
.jpg, “.jpeg,  
.png, “.gif”  
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless  
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files  
are not supported.  
Disc,  
USB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started 11  
Note  
Note  
,
,
The file name is limited to 180 characters.  
y
y
Aavile which is encodedWMV 9 codec”  
is not supported.  
y
y
Maximum files/Folder: Less than 2000 (total  
number of files and folders)  
This player supports UTF-8 files even it  
contains Unicode subtitle contents. This  
player can not support the pure Unicode  
subtitle files.  
1
Depending on the size and number of the  
files, it may take several minutes to read the  
contents on the media.  
y
y
Depending on the types of file or ways of  
recording, it may not play back.  
y
y
The file requirements on page 10 are not  
always compatible. There may have some  
restrictions by file features.  
A disc which was recorded by multi-session  
on normal PC is not supported on this  
player.  
This unit cannot support the ID3 Tag  
embedded MP3 file.  
y
y
To be playback a movie file, movie file name  
and Subtitle file name must be the same.  
y
y
The total playback time of audio file  
indicated on the screen may not correct for  
VBR files.  
If video codec is MPEG2 TS or MPEG2 PS,  
subtitle does not play back.  
HD movie files contained on the CD or USB  
1.0/1.1 may not played properly.  
Blu-ray Disc, DVD or USB 2.0 are  
y
y
y
recommended to play back HD movie files.  
AVCHD (Advanced Video  
Codec High Definition)  
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
This player supports H.264/MPEG-4 AVC  
profile Main, High at Level 4.1. For a file  
with higher level, the warning message will  
appear on the screen.  
y
This player does not support files that are  
recorded with GMC 1 or Qpel  
.
2
The AVCHD format is a high definition digital  
video camera format.  
y
y
*
*
*1 GMC – Global Motion Compensation  
*2 Qpel – Quarter pixel  
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
This player can playback AVCHD discs using  
“x.v.Colourformat.  
y
y
Some AVCHD format discs may not play  
depending on the recording condition.  
AVCHD format discs need to be finalized.  
y
y
“x.v.Colouroffers a wider colour range than  
normal DVD camcorder discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Getting Started  
Certain System Requirements  
Regional Code  
This unit has a regional code printed on the rear of  
the unit. This unit can play only BD-ROM or DVD  
discs labelled same as the rear of the unit orALL”.  
For high definition video playback:  
High definition display that has HDMI input jack.  
BD-ROM disc with high definition content.  
y
y
y
1
HDMI or HDCP capable DVI input on your display  
device is required for some content (as specified  
by disc authors).  
System Select  
Open the disc tray using the B(OPEN/CLOSE)  
button and then, press and hold M(PAUSE) for  
more than five seconds to change the color system  
(PAL /NTSC /AUTO).  
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD  
multi-channel audio playback:  
An amplifier/receiver with a built-in (Dolby  
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or  
DTS-HD) decoder.  
y
Main, center, surround speakers and subwoofer  
as necessary for chosen format.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 13  
Remote control  
• • • • • • a • • • • • •  
• • • • • • d • • • • •  
1(POWER): Switches the player REPEAT (h): Repeats a desired  
1
ON or OFF.  
section or sequence.  
B(OPEN/CLOSE): Opens and  
closes the disc tray.  
AUDIO ([): Selects an audio  
language.  
0-9 numerical buttons: Selects  
numbered options in a menu.  
SUBTITLE (]): Selects a subtitle  
language.  
CLEAR: Removes a number when TITLE/POP-UP: Displays the DVD  
setting the password.  
title menu or BD-ROM’s pop-up  
menu, if available.  
TV Control Buttons: See page  
Colored (R, G, Y, B) buttons: Use  
to navigate BD-ROM menus. They  
are also used for [MOVIE], [PHOTO]  
and [MUSIC] menu.  
• • • • • • b • • • • •  
c/v(SCAN): Searches  
backward or forward.  
C/V(SKIP): Goes to the  
next or previous chapter / track /  
file.  
M(PAUSE): Pauses playback.  
z(PLAY): Starts playback.  
Z(STOP): Stops playback.  
• • • • • • c • • • • •  
HOME (n): Displays or exits the  
[Home Menu].  
Battery Installation  
INFO/MENU (m): Displays or  
exits On-Screen Display.  
Direction buttons: Selects an  
option in the menu.  
ENTER (b): Acknowledges menu  
selection.  
Remove the battery cover on the  
rear of the Remote Control, and  
insert the R03 (size AAA) battery  
with 4and 5matched correctly.  
BACK (1): Exits the menu or  
resumes playback. The resume  
play function may not work  
depending on the BD-ROM disc.  
DISC MENU: Accesses menu on a  
disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Getting Started  
Front panel  
1
a Disc Tray  
d B(OPEN / CLOSE)  
e 1(POWER)  
f USB Port  
b Power indicator  
c Remote Sensor  
Rear panel  
a DC IN 12V (AC adapter input)  
c DIGITAL AUDIO OUT (COAXIAL)  
b HDMI OUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 15  
Connecting the AC  
Adapter  
Connect the unit to the power supply with the  
supplied AC Adapter.  
Connecting to Your TV  
If you have a HDMI TV or monitor, you can connect  
it to this player using a HDMI cable (Type A, High  
Speed HDMI™ Cable). Connect the HDMI jack on  
the player to the HDMI jack on a HDMI compatible  
TV or monitor.  
Rear of the unit  
Rear of the unit  
2
HDMI  
cable  
TV  
Plug into a  
power source.  
Contact an electrical parts distributor for  
assistance in selecting a suitable AC plug adapter  
or AC cord set.  
y
y
Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
This AC adapter is manufactured by APD Group  
Yang Ming Industrial.  
Note  
,
Caution  
>
Please refer to the manuals of your TV, Stereo  
System or other devices as necessary to make  
the best connections.  
Only use the AC adapter supplied with this  
device. Do not use a power supply from  
another device or manufacturer. Using any  
other power cable or power supply may cause  
damage to the device and void your warranty.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 Connecting  
Additional Information for HDMI  
What is SIMPLINK?  
When you connect a HDMI or DVI compatible  
device make sure of the following:  
y
Some functions of this unit are controlled by the  
TVs remote control when this unit and LG TV’s with  
SIMPLINK are connected through HDMI connection.  
-
Try switching off the HDMI/DVI device and  
this player. Next, switch on the HDMI/DVI  
device and leave it for around 30 seconds,  
then switch on this player.  
Controllable functions by LG TV’s remote control;  
Play, Pause, Scan, Skip, Stop, Power Off, etc.  
-
-
The connected device’s video input is set  
correctly for this unit.  
2
Refer to the TV owner’s manual for the details of  
SIMPLINK function.  
The connected device is compatible with  
720x576p, 1280x720p, 1920x1080i or  
1920x1080p video input.  
LG TV’s with SIMPLINK function has the logo as  
shown above.  
Not all HDCP-compatible HDMI or DVI devices  
will work with this player.  
y
Note  
,
Depending on the disc type or playing status,  
some SIMPLINK operation may differ from your  
purpose or not work.  
-
The picture will not be displayed properly  
with non-HDCP device.  
Note  
,
If a connected HDMI device does not accept  
y
the audio output of the player, the HDMI  
device’s audio sound may be distorted or  
may not output.  
When you use HDMI connection, you can  
change the resolution for the HDMI output.  
(Refer toResolution Settingon page 17)  
y
y
Select the type of video output from the  
HDMI OUT jack using [HDMI Color Setting]  
option on the [Setup] menu (see page  
Changing the resolution when the  
connection has already been established  
may result in malfunctions. To solve the  
problem, turn off the player and then turn it  
on again.  
y
When the HDMI connection with HDCP  
is not verified, TV screen is changed to  
black screen. In this case, check the HDMI  
connection, or disconnect the HDMI cable.  
y
y
If there are noises or lines on the screen,  
please check the HDMI cable (length is  
generally limited to 4.5 m).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 17  
Note  
,
Resolution Setting  
The player provides several output resolutions for  
HDMI OUT jack. You can change the resolution  
using [Setup] menu.  
If your TV does not accept the resolution  
you have set on the player, you can set  
resolution to 576p as follows:  
y
1. Press Bto open the disc tray.  
1. Press HOME (n).  
2. Press Z(STOP) for more than 5 seconds.  
2. Use a/dto select the [Setup] and press ENTER  
When you set the resolution to 576i with  
HDMI connection, actual resolution is  
outputted to 576p.  
y
y
(b). The [Setup] menu appears.  
3. Use w/sto select [DISPLAY] option then press  
dto move to the second level.  
2
If you select a resolution manually and then  
connect the HDMI jack to TV and your TV  
does not accept it, the resolution setting is  
set to [Auto].  
4. Use w/sto select the [Resolution] option then  
press ENTER (b) to move to the third level.  
If you select a resolution that your TV  
does not accept, the warning message  
will appear. After resolution change,  
if you cannot see the screen, please  
wait 20 seconds and the resolution will  
automatically revert back to the previous  
resolution.  
y
y
5. Use w/sto select the desired resolution then  
press ENTER (b) to confirm your selection.  
The 1080p video output frame rate may  
be automatically set to either 24 Hz or  
50 Hz depending both on the capability  
and preference of the connected TV and  
based on the native video frame rate of the  
content on the BD-ROM disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18 Connecting  
Connecting to an Amplifier via  
HDMI Output  
Connect the player’s HDMI OUT jack to the  
corresponding in jack on your amplifier using a  
HDMI cable.  
Connecting to an  
Amplifier  
Make one of the following connections, depending  
on the capabilities of your existing equipment.  
HDMI Audio connection (page 18)  
Digital Audio connection (page 19)  
y
y
Rear of the unit  
Since many factors affect the type of audio output,  
seeAudio Output Specificationsfor details (pages  
2
About Digital Multi-channel sound  
A digital multi-channel connection provides the  
best sound quality. For this, you need a multi-  
channel Audio/Video Receiver that supports one  
or more of the audio formats supported by your  
player. Check the logos on the front of the Audio/  
Video receiver and the manual. (PCM Stereo, PCM  
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby  
TrueHD, DTS and/or DTS-HD)  
HDMI cable  
Receiver/Amplifier  
HDMI  
cable  
TV  
Connect the amplifier’s HDMI output jack to HDMI  
input jack on your TV using a HDMI cable if your  
amplifier has HDMI output jack.  
You will need to activate the player’s digital output.  
(See[AUDIO] Menuon pages 24)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting 19  
Connecting to an Amplifier via  
Digital Audio Output  
Connect the player’s COAXIAL OUT jack to the  
corresponding in jack on your amplifier using an  
optional digital audio cable.  
Rear of the unit  
2
Coaxial cable  
Receiver/Amplifier  
You will need to activate the player’s digital output.  
(See[AUDIO] Menuon pages 24.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
20 Connecting  
Note  
,
USB device connection  
This player can play movie, music and photo files  
contained in the USB device.  
This player supports USB flash drive/  
y
external HDD formatted in FAT32 and NTFS  
when accessing files (music, photo, movie).  
However, for Blu-ray contents, only FAT32  
format is supported. Use the USB flash drive/  
external HDD formatted in either FAT32 or  
NTFS when enjoying Blu-ray contents.  
Playback content in the USB  
device  
1. Insert a USB device to the USB port until it fits  
into place.  
This unit can support up to 4 partitions of  
the USB device.  
y
y
y
2
Do not extract the USB device during  
operation (play, etc.).  
A USB device which requires additional  
program installation when you have  
connected it to a computer, is not  
supported.  
USB device: USB device that supports  
USB1.1 and USB2.0.  
y
y
Movie, music and photo files can be played.  
For details of operations on each file, refer to  
relevant pages.  
When you connect the USB device on the HOME  
menu, the player plays a music file contained in the  
USB storage device automatically. If the USB storage  
device is containing various types of files, a menu  
for the file type selection will appear.  
Regular back up is recommended to  
prevent data loss.  
y
y
If you use a USB extension cable, USB HUB  
or USB Multi-reader, the USB device may not  
be recognized.  
File loading may takes few minutes depending on  
the number of content stored in the USB storage  
device. Press ENTER (b) while [Cancel] is selected  
to stop loading.  
Some USB device may not work with this  
unit.  
y
y
y
2. Press HOME (n).  
Digital camera and mobile phone are not  
supported.  
3. Select [Movie], [Photo] or [Music] using a/d,  
and press ENTER (b).  
USB Port of the unit cannot be connected  
to PC. The unit cannot be used as a storage  
device.  
4. Select the [USB] option using w/s, and press  
ENTER (b).  
5. Select a file using w/s/a/d, and press PLAY  
or ENTER (b) to play the file.  
6. Withdraw the USB device carefully.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 21  
Adjust the Setup Settings  
You can change the settings of the player in the  
[Setup] menu.  
Settings  
1. Press HOME (n).  
Initial Setup  
When you turn on the unit for the first time, the  
initial setup wizard appears on the screen. Set the  
display language on the initial setup wizard.  
1. Press 1(POWER).  
The initial setup wizard appears on the screen.  
2. Use a/dto select the [Setup] and press ENTER  
2. Use w/s/a/dto select a display language  
(b). The [Setup] menu appears.  
and press ENTER (b).  
3
3. Use w/sto select the first setup option, and  
3. Check the setting that you have set in the  
previous step.  
press dto move to the second level.  
4. Use w/sto select a second setup option, and  
Press ENTER (b) while [Finish] is highlighted  
to finish the initial setup settings. If there is any  
settings to be changed, use a/dto select  
[Previous] and press ENTER (b).  
press ENTER (b) to move to the third level.  
5. Use w/sto select a desired setting, and press  
ENTER (b) to confirm your selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 System Setting  
Resolution  
[DISPLAY] Menu  
Sets the output resolution of the HDMI video signal.  
Refer to page 17 for details about the resolution  
setting.  
TV Aspect Ratio  
Select a TV aspect ratio option according to your TV  
type.  
[Auto]  
If the HDMI OUT jack is connected to  
TVs providing display information (EDID),  
automatically selects the resolution best suited  
to the connected TV.  
[4:3 Letter Box]  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking bars  
above and below the picture.  
[1080p]  
[4:3 Pan Scan]  
Outputs 1080 lines of progressive video.  
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV screen.  
Both sides of the picture are cut off.  
[1080i]  
Outputs 1080 lines of interlaced video.  
3
[16:9 Original]  
[720p]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is displayed with an original 4:3  
aspect ratio, with black bars appearing at the  
left and right sides.  
Outputs 720 lines of progressive video.  
[576p]  
Outputs 576 lines of progressive video.  
[16:9 Full]  
[576i]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is adjusted horizontally (in a linear  
proportion) to fill the entire screen.  
Outputs 576 lines of interlaced video.  
1080p Display Mode  
Note  
,
When the resolution is set to 1080p, select  
[24 Hz] for smooth presentation of film material  
(1080p/24 Hz) with a HDMI-equipped display  
compatible with 1080p/24 Hz input.  
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is  
set to higher than 720p.  
Note  
,
When you select [24 Hz], you may  
experience some picture disturbance when  
the video switches video and film material.  
In this case, select [50 Hz].  
y
y
Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with  
1080p/24 Hz, the actual frame frequency of  
the video output will be 50 Hz to match the  
video source format.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 23  
HDMI Color Setting  
Select the type of output from the HDMI OUT jack.  
For this setting, please refer to the manuals of your  
display device.  
[LANGUAGE] Menu  
Display Menu  
Select a language for the [Setup] menu and on-  
screen display.  
[YCbCr]  
Select when connecting to a HDMI display  
device.  
Disc Menu/Disc Audio/  
Disc Subtitle  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
[RGB]  
Select when connecting to a DVI display  
device.  
[Original]  
Refers to the original language in which the  
disc was recorded.  
Home Menu Guide  
This function allows you to display or delete the  
guide bubble on the Home Menu. Set this option  
to [On] for displaying guide.  
3
[Other]  
Press ENTER (b) to select another language.  
Use number buttons then press ENTER (b)  
to enter the corresponding 4-digit number  
[Off] (Disc Subtitle only)  
Turn off Subtitle.  
Note  
,
Depending on the disc, your language setting  
may not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24 System Setting  
Sampling Freq.  
(Digital Audio Output)  
[AUDIO] Menu  
Each disc has a variety of audio output options. Set  
the player’s Audio options according to the type of  
audio system you use.  
[48 kHz]  
Select this if your A/V Receiver or Amplifier is  
not capable of handling 192 kHz and 96 kHz  
signal. When this choice is made, this unit  
automatically converts any 192 kHz and 96 kHz  
signals to 48 kHz so your system can decode  
them.  
Note  
,
Since many factors affect the type of audio  
output, seeAudio Output Specificationson  
page 43 for details.  
[96 kHz]  
Digital Output  
Select this if your A/V Receiver or Amplifier is  
not capable of handling 192 kHz signals. When  
this choice is made, this unit automatically  
converts any 192 kHz signals to 96 kHz so your  
system can decode them.  
[PCM Stereo] (HDMI, COAXIAL)  
Select if you connect this unit’s HDMI OUT  
or COAXIAL OUT jack to a device with two-  
channel digital stereo decoder.  
3
[192 kHz]  
[PCM Multi-Ch] (HDMI only)  
Select this if your A/V Receiver or Amplifier is  
capable of handling 192 kHz signals.  
Select if you connect this unit’s HDMI OUT jack  
to a device with multi-channel digital decoder.  
Check the documentation for your A/V Receiver or  
Amplifier to verify its capabilities.  
[DTS Re-Encode] (HDMI, COAXIAL)  
Select if you connect this unit’s HDMI OUT  
or COAXIAL OUT jack to a device with DTS  
decoder.  
DRC (Dynamic Range Control)  
This function allows you to listen to a movie at a  
lower volume without losing clarity of sound.  
[BitStream] (HDMI, COAXIAL)  
Select if you connect this unit’s COAXIAL OUT  
and HDMI OUT jack to a device with LPCM,  
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,  
DTS and DTS-HD decoder.  
[Auto]  
The dynamic range of the Dolby TrueHD audio  
output is specified by itself.  
And the dynamic range of the Dolby Digital  
and Dolby Digital Plus are operated as same as  
the [On] mode.  
Note  
,
When [Digital Output] option is set to [PCM  
Multi-Ch], the audio may output as PCM  
Stereo if the PCM Multi-Ch information is  
not detected from HDMI device with EDID.  
y
y
[On]  
Compress the dynamic range of the Dolby  
Digital, Dolby Digital Plus or Dolby TrueHD  
audio output.  
If the [Digital Output] option is set to [DTS  
Re-Encode], the DTS Re-Encode audio is  
outputted for BD-ROM discs with secondary  
audio and the original audio is outputted  
for the other discs (like [BitStream]).  
[Off]  
Turns off this function.  
Note  
,
The DRC setting can be changed only when a  
disc is not inserted or the unit is in complete  
stop mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Setting 25  
DVD Rating  
Blocks playback of rated DVD based on their  
content. (Not all discs are rated.)  
[LOCK] Menu  
The [LOCK] settings affect only BD-ROM and DVD  
playback.  
To access the any features in [LOCK] settings, you  
must enter the 4-digit security code you have  
created.  
If you have not entered a password yet, you are  
prompted to do so. Enter a 4-digit password twice,  
and press ENTER (b) to create a new password.  
[Unlock]  
If you select [Unlock], parental control is not  
active and the disc plays in full.  
[Rating 1-8]  
Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
Password  
You can create or change the password.  
Blu-ray Disc Rating  
Set an age limit of BD-ROM play. Use number  
[None]  
buttons to input an age limit for BD-ROM viewing.  
3
Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
[255]  
[Change]  
All BD-ROM can be played.  
Enter the current password and press ENTER  
(b). Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
[0-254]  
Prohibits play of BD-ROM with corresponding  
ratings recorded on them.  
If you forget your password  
Note  
,
If you forget your password, you can clear it using  
the following steps:  
The [Blu-ray Disc Rating] will be applied  
only for the Blu-ray disc that containing the  
Advanced Rating Control.  
1. Remove any disc that might be in the player.  
2. Select [Password] option in the [Setup] menu.  
3. Use Number buttons to enter210499. The  
password is cleared.  
Area Code  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list  
Note  
,
If you make a mistake before pressing ENTER  
(b), press CLEAR. Then input the correct  
password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 System Setting  
Auto Power Off  
[OTHERS] Menu  
The screen saver appears when you leave the  
player in Stop mode for about five minutes. If  
you set this option to [On], the unit automatically  
turns off within 20 minutes since the Screen Saver  
is displayed. Set this option to [O] to leave the  
screen saver until the unit is operated by the user.  
DivX® VOD  
ABOUT DIVX VIDEO: DivX® is a digital video  
format created by DivX, LLC, a subsidiary of Rovi  
Corporation. This is an official DivX Certified® device  
that plays DivX video. Visit divx.com for more  
information and software tools to convert your files  
into DivX videos.  
Initialize  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified® device must be registered in order to play  
purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX  
VOD section in your device setup menu. Go to vod.  
divx.com for more information on how to complete  
your registration.  
[Factory Set]  
You can reset the player to its original factory  
settings.  
[Blu-ray Storage Clear]  
3
Initializes the Blu-ray contents from the  
connected USB storage.  
[Register]  
Software  
Displays the registration code of your player.  
[Information]  
[Deregister]  
Displays the current software version.  
Deactivate your player and display the  
deactivation code.  
Note  
,
All the downloaded videos from DivX(R) VOD  
with this player’s registration code can only be  
played on this unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 27  
Playing a Disc  
General Playback  
erto  
1. Press B(OPEN/CLOSE), and place a disc on the  
Using [HOME] menu  
disc tray.  
The home menu appears when you press HOME  
(n). Use a/dto select a category and press  
ENTER (b).  
2. Press B(OPEN/CLOSE) to close the disc tray.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts automatically.  
3. Press HOME (n).  
4. Select [Movie] or [Music] using a/d, and press  
ENTER (b).  
5. Select [Blu-ray Disc], [DVD], [VR] or [Audio]  
option using w/s, and press ENTER (b).  
Note  
,
Playback functions described in this manual  
are not always available in every files and  
media. Some functions can be restricted  
depending on many factors.  
y
y
Depending on the BD-ROM titles, a USB  
device connection may be needed for the  
proper playback.  
4
a
b
c
d
[Movie] - Plays video contents.  
[Photo] - Plays photo contents.  
[Music] - Plays audio contents.  
[Setup] - Adjusts the system settings.  
Unfinalized DVD-VR format discs may not  
be played in this player.  
y
y
Some DVD-VR discs are made with CPRM  
data by DVD RECORDER. This unit cannot  
support these kinds of discs.  
Playing a file on disc/USB  
device  
yui  
This player can play movie, music and photo files  
contained in the disc or USB device.  
1. Insert a data disc on the tray or connect a USB  
device.  
2. Press HOME (n).  
3. Select [Movie], [Photo] or [Music] using a/d,  
and press ENTER (b).  
4. Select [Data] or [USB] option using w/s, and  
press ENTER (b).  
5. Select a file using w/s/a/d, and press  
z(PLAY) or ENTER (b) to play the file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 Operating  
Basic operations for video and  
audio content  
Basic operations for photo  
content  
To stop playback  
To play a slide show  
Press Z(STOP) while playback.  
Press z(PLAY) to start slide show.  
To pause playback  
To stop a slide show  
Press M(PAUSE) while playback.  
Press z(PLAY) to resume playback.  
Press Z(STOP) while slide show.  
To pause a slide show  
Press M(PAUSE) while slide show.  
To play frame-by-frame (Video)  
Press M(PAUSE) while movie playback.  
Press M(PAUSE) repeatedly to play Frame-by-Frame  
playback.  
Press z(PLAY) to re-start the slide show.  
To skip to the next/previous photo  
While viewing a photo in full screen, press aor d  
to go to the previous or next photo.  
To scan forward or backward  
Press cor vto play fast forward or fast reverse  
during playback.  
Using the disc menu  
You can change the various playback speeds by  
4
pressing cor vrepeatedly.  
ero  
To slow down the playing speed  
While the playback is paused, press vrepeatedly  
to play various speeds of slow motion.  
To display the disc menu  
The menu screen may be displayed first after  
loading a disc which contains a menu. If you want  
to display the disc menu while playback, press DISC  
MENU.  
To skip to the next/previous  
chapter/track/file  
During playback, press Cor Vto go to the  
next chapter/track/file or to return to the beginning  
of the current chapter/track/file.  
Use w/s/a/dbuttons to navigate through  
menu items.  
To display the Pop-up menu  
Some BD-ROM discs contain Pop-up menu that  
appears while playback.  
Press Ctwice briefly to step back to the previous  
chapter/track/file.  
Press TITLE/POP-UP while playback, and use  
w/s/a/dbuttons to navigate through menu  
items.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 29  
Resume playback  
Advanced Playback  
eroyt  
u
The unit records the point where you pressed the  
Z(STOP) depending on the disc.  
IfMZ(Resume Stop)appears on the screen  
briefly, press z(PLAY) to resume playback (from  
the scene point).  
If you press Z(STOP) twice or unload the disc,  
Z(Complete Stop)appears on the screen. The unit  
will clear the stopped point.  
Repeat Playback  
erotu  
y
During playback, press REPEAT (h) repeatedly to  
select a desired repeat mode.  
Blu-ray Disc / DVD / Movie files  
jA- – Selected portion will be repeated continually.  
(page 30)  
Note  
,
The resume point may be cleared when a  
button is pressed (for example; 1(POWER),  
B(OPEN/CLOSE), etc).  
y
jChapter – The current chapter will be played  
back repeatedly.  
jTitle – The current title will be played back  
repeatedly.  
On BD-ROM discs with BD-J, the resume  
playback function does not work.  
y
y
jAll – All the tracks or files will be played back  
repeatedly.  
If you press Z(STOP) once during BD-ROM  
interactive title playback, the unit will be in  
Complete Stop mode.  
4
To return to normal playback, press REPEAT (h)  
repeatedly to select [O].  
Audio CDs/Music files  
Last Scene Memory  
er  
This unit memorizes the last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the unit or switch  
off the unit. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
;Track – The current track or file will be played  
back repeatedly.  
:All – All the tracks or files will be played back  
repeatedly.  
l– The tracks or files will be played back in  
random order.  
l:All – All the tracks or files will be played  
back repeatedly in random order.  
Note  
,
Last Scene Memory function for a previous  
disc is erased once a different disc is played.  
y
y
y
y
kA-B – Selected portion will be repeated  
continually. (Audio CD only)  
This function may not work depending on  
the disc.  
To return to normal playback, press CLEAR.  
Note  
On BD-ROM discs with BD-J, the last scene  
memory function does not work.  
,
If you press Vonce during Repeat  
Chapter/Track playback, the repeat playback  
cancels.  
y
y
This unit does not memorize settings of  
a disc if you switch off the unit before  
commencing to play it.  
This function may not work on some disc or  
title.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 Operating  
Repeating a specific portion  
Changing content list view  
eroty  
yui  
This player can repeat a portion you have selected.  
On the [Movie], [Music] or [Photo] menu, you can  
change the content list view.  
1. While playback, press REPEAT (h) to select  
[A-] at the beginning of the portion you wish to  
repeat.  
Method 1  
Press red (R) coloured button repeatedly.  
2. Press ENTER (b) at the end of the portion. Your  
selected portion will be repeated continually.  
3. To return to normal playback, press REPEAT  
(h) repeatedly to select [O].  
Note  
,
You cannot select a portion less than 3  
seconds.  
y
y
This function may not work on some disc or  
title.  
Viewing content information  
4
y
The player can display the content information.  
1. Select a file using w/s/a/d.  
2. Press INFO/MENU (m) to display the option  
menu.  
3. Select the [Information] option using w/s, and  
press ENTER (b).  
The file information appears on the screen.  
While movie playback, you can display the file  
information by pressing TITLE/POP-UP.  
Note  
,
The information displayed on the screen  
may not correct comparing actual content  
information.  
Method 2  
1. On the content list, press INFO/MENU (m) to  
display the option menu.  
2. Use w/sto select the [View Change] option.  
3. Press ENTER (b) to change the content list  
view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 31  
Selecting a subtitle file  
Options while viewing a photo  
y
i
If the subtitle file name is different from the movie  
file name, you need to select the subtitle file on the  
[Movie] menu before playing the movie.  
You can use various options during viewing a  
photo in full screen.  
1. While viewing a photo in full screen, press INFO/  
1. Use w/s/a/dto select the subtitle file you  
MENU (m) to display the option menu.  
wish to play in the [Movie] menu.  
2. Select an option using w/s.  
2. Press ENTER (b).  
Press ENTER (b) again to deselect the subtitle  
file. Selected subtitle file will be displayed when  
you play the movie file.  
a Current photo/Total number of photos  
4
– Use a/dto view previous/next photo.  
b Slide Show – Press ENTER (b) to start or  
Note  
,
pause slide show.  
If you press Z(STOP) while playback, the  
c Music Select – Select the background  
subtitle selection is cancelled.  
music for the slide show (page 32).  
d Music –Press ENTER (b) to start or pause  
background music.  
e Rotate – Press ENTER (b) to rotate the  
photo clockwise.  
f Zoom – Press ENTER (b) to display the  
[Zoom] menu.  
g Effect – Use a/dto select a transition  
effect between photos in a slide show.  
h Speed – Use a/dto select a delaying  
speed between photos in a slide show.  
3. Press BACK (1) to exit the option menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 Operating  
Listening to music while slide  
show  
On-Screen display  
You can display and adjust various information and  
settings about the content.  
i
You can display photo files while listening to music  
files.  
Displaying content information  
on-screen  
1. While viewing a photo in full screen, press INFO/  
MENU (m) to display the option menu.  
2. Use w/sto select [Music Select] option, and  
press ENTER (b) to display the [Music Select]  
menu.  
eroy  
1. While playback, press INFO/MENU (m) to show  
various playback information.  
3. Use w/sto select a device, and press ENTER  
(b).  
4. Use w/sto select a file or a folder you wish to  
play.  
4
Select gand press ENTER (b) to display the  
upper directory.  
5. Use dto select [OK], and press ENTER (b) to  
a Title – current title number/total number of  
complete music selection.  
titles  
b Chapter – current chapter number/total  
number of chapters  
c Time – elapsed playing time/total playback  
time  
d Audio – selected audio language or channel  
e Subtitle – selected subtitle.  
f Angle – selected angle/total number of  
angles  
g TV Aspect Ratio – selected TV aspect Ratio  
h Picture Mode – selected picture mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating 33  
2. Select an option using w/s.  
Playing from selected time  
eroy  
3. Use a/dto adjust the selected option value.  
4. Press BACK (1) to exit the On-Screen display.  
1. Press INFO/MENU (m) during playback. The  
time search box shows the elapsed playing  
time.  
Note  
,
If no button is pressed for a few seconds,  
the on-screen display disappears.  
y
y
y
y
2. Select the [Time] option and then input the  
required start time in hours, minutes, and  
seconds from left to right.  
A title number cannot be selected on some  
discs.  
Available items may differ depending on  
discs or titles.  
For example, to find a scene at 2 hours, 10  
minutes, and 20 seconds, enter21020.  
If an interactive Blu-ray Disc is playing back,  
some setting information is displayed on  
the screen but prohibited to be changed.  
Press a/dto skip the playback 60 seconds  
forward or backward.  
3. Press ENTER (b) to start playback from selected  
time.  
Note  
,
This function may not work on some disc or  
titles.  
4
Selecting a subtitle language  
eroy  
1. During playback, press INFO/MENU (m) to  
display the On-Screen display.  
2. Use w/sto select the [Subtitle] option.  
3. Use a/dto select desired subtitle language.  
4. Press BACK (1) to exit the On-Screen display.  
Note  
,
Some discs allow you to change subtitle  
selections only via the disc menu. If this is  
the case, press TITLE/POP-UP or DISC MENU  
button and choose the appropriate subtitle  
from the selections on the disc menu.  
y
You can select the [Subtitle] option on the  
On-Screen display directely by pressing  
SUBTITLE (]) button.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 Operating  
Hearing a different audio  
Changing the TV Aspect Ratio  
eroy  
eoy  
You can change the TV aspect ratio setting while  
playback.  
1. During playback, press INFO/MENU (m) to  
display the On-Screen display.  
2. Use w/sto select the [Audio] option.  
1. During playback, press INFO/MENU (m) to  
display the On-Screen display.  
3. Use a/dto select desired audio language,  
audio track or audio channel.  
2. Use w/sto select the [TV Aspect Ratio]  
option.  
Note  
,
3. Use a/dto select desired option.  
Some discs allow you to change audio  
selections only via the disc menu. In this  
case, press TITLE/POP-UP or DISC MENU  
button and choose the appropriate audio  
from the selections on the disc menu.  
y
4. Press BACK (1) to exit the On-Screen display.  
Note  
,
Even if you change the value of the [TV Aspect  
Ratio] option in On-Screen display, the [TV  
Aspect Ratio] option in the [Setup] menu is  
not changed.  
Immediately after you have switched sound,  
there may be a temporary discrepancy  
between the display and actual sound.  
y
y
y
On BD-ROM disc, the multi audio format  
(5.1CH or 7.1CH) is displayed with [MultiCH]  
in the on-screen display.  
4
You can select the [Audio] option on the  
On-Screen display directely by pressing  
AUDIO ([) button.  
Watching from a different  
angle  
ero  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
1. During playback, press INFO/MENU (m) to  
display the On-Screen display.  
2. Use w/sto select the [Angle] option.  
3. Use a/dto select desired angle.  
4. Press BACK (1) to exit the On-Screen display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 35  
Changing subtitle code page  
Changing the Picture Mode  
y
eroy  
If the subtitle is displayed in broken letter, you can  
change the subtitle code page to view the subtitle  
file properly.  
You can change the [Picture mode] option while  
playback.  
1. During playback, press INFO/MENU (m) to  
1. During playback, press INFO/MENU (m) to  
display the On-Screen display.  
display the playback menu.  
2. Use w/sto select the [Picture Mode] option.  
3. Use a/dto select desired option.  
2. Use w/sto select the [Code Page] option.  
3. Use a/dto select desired code option.  
4. Press BACK (1) to exit the On-Screen display.  
Setting the [User setting] option  
1. During playback, press INFO/MENU (m) to  
display the On-Screen display.  
2. Use w/sto select the [Picture Mode] option.  
3. Use a/dto select the [User setting] option,  
and press ENTER (b).  
4
4. Press BACK (1) to exit the On-Screen display.  
4. Use w/s/a/dto adjust the [Picture Mode]  
options.  
Select [Default] option then press ENTER (b) to  
reset the all video adjustments.  
5. Use w/s/a/dto select the [Close] option,  
and press ENTER (b) to finish setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 Troubleshooting  
Troubleshooting  
General  
Symptom  
Cause & Solution  
The Power does not turned on.  
Plug the power cord into the wall outlet securely.  
y
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, colour system, and  
regional code.)  
y
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
y
y
y
y
Cancel the Rating function or change the rating level.  
The angle cannot be changed.  
Multi-angles are not recorded on the DVD Video being played.  
y
Cannot play movie, photo or  
music files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the movie file.  
y
y
The remote control does not  
work properly.  
The remote control is not pointed at the remote sensor of the unit.  
The remote control is too far from the unit.  
y
y
y
y
There is an obstacle in the path of the remote control and the unit.  
The battery in the remote control is exhausted.  
5
The unit is plugged in, but the You can reset the unit as follows.  
power will not turn on or off.  
Unplug the power cord, wait at least five seconds, and then plug it in  
y
again.  
The unit is not operating  
normally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting 37  
Picture  
Symptom  
Cause & Solution  
There is no picture.  
Select the appropriate video input mode on the TV so the picture  
from the unit appears on the TV screen.  
y
Connect the video connection securely.  
y
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the  
appropriate item that conforms to your video connection.  
Your TV may not support the resolution you have set on the player.  
Change the resolution that your TV accepts.  
y
y
The player’s HDMI OUT jack is connected to a DVI device that does  
not support copyright protection.  
Picture noise appears.  
You are playing a disc recorded in a colour system that is different  
from your TV.  
y
y
Set the resolution which your TV accepts.  
Customer Support  
You can update the Player using the latest software to enhance the products operation and/or add new  
features. To obtain the latest software for this player (if updates have been made), please visit  
Open source software notice  
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit  
available to download with the source code.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 Appendix  
Setting up the remote to  
control your TV  
Controlling a TV with  
the Supplied Remote  
Control  
You can operate your TV with the supplied remote  
control.  
If your TV is listed in the table below, set the  
appropriate manufacturer code.  
You can control your TV using the buttons below.  
1. While holding down 1(TV POWER) button,  
and press the manufacturer code for your  
TV with the numerical buttons (see the table  
below).  
Manufacturer  
LG  
Code Number  
1(Default), 2  
Zenith  
1, 3, 4  
1, 2  
6, 7  
8, 9  
4
GoldStar  
Samsung  
Sony  
By pressing  
You can  
1(TV POWER)  
Turn the TV on or off.  
Hitachi  
Scan up or down through  
memorized channels.  
PR/CH +/–  
VOL +/–  
2. Release the 1(TV POWER) button to complete  
setting.  
Adjust the volume of the TV  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code. When you replace the batteries  
of the remote, the code number you have set may  
be reset to the default setting. Set the appropriate  
code number again.  
Switch the TV’s input source  
between the TV and other  
input sources.  
AV/INPUT  
Note  
,
Depending on the unit being connected, you  
may not be able to control your TV using some  
of the buttons.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix 39  
Area Code List  
Choose an area code from this list.  
Area  
Code Area  
AF Fiji  
Code Area  
FJ Monaco  
Code Area  
Code  
MC  
MN  
MA  
NP  
NL  
AN  
NZ  
NG  
NO  
OM  
PK  
Singapore  
Slovak Republic  
SG  
Afghanistan  
Argentina  
Australia  
Austria  
FI Mongolia  
FR Morocco  
DE Nepal  
SK  
SI  
AR Finland  
AU France  
AT Germany  
BE Great Britain  
BT Greece  
BO Greenland  
BR Hong Kong  
KH Hungary  
CA India  
Slovenia  
South Africa  
South Korea  
Spain  
ZA  
KR  
Belgium  
Bhutan  
GB Netherlands  
GR Antilles  
GL New Zealand  
HK Nigeria  
HU Norway  
IN Oman  
ES  
Sri Lanka  
Sweden  
LK  
Bolivia  
SE  
Brazil  
Switzerland  
Taiwan  
CH  
TW  
TH  
TR  
Cambodia  
Canada  
Chile  
ID Pakistan  
IL Panama  
Thailand  
Turkey  
CL Indonesia  
CN Israel  
China  
PA  
IT Paraguay  
JM Philippines  
JP Poland  
PY  
Uganda  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Colombia  
Congo  
CO Italy  
PH  
PL  
Ukraine  
CG Jamaica  
CR Japan  
United States  
Uruguay  
Uzbekistan  
Vietnam  
Costa Rica  
Croatia  
HR Kenya  
KE Portugal  
KW Romania  
LY Russian  
PT  
Czech Republic  
Denmark  
Ecuador  
Egypt  
CZ Kuwait  
DK Libya  
RO  
Federation  
RU  
SA  
SN  
LU  
Zimbabwe  
EC Luxembourg  
EG Malaysia  
SV Maldives  
ET Mexico  
Saudi Arabia  
MY  
Senegal  
6
El Salvador  
Ethiopia  
MV  
MX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40 Appendix  
Language code List  
Use this list to input your desired language for the following initial settings: [Disc Audio],  
[Disc Subtitle] and [Disc Menu].  
Language  
Afar  
Code Language  
6565 French  
6570 Frisian  
Code Language  
7082 Lithuanian  
7089 Macedonian  
7176 Malagasy  
7565 Malay  
Code Language  
7684 Sindhi  
7775 Singhalese  
7771 Slovak  
7783 Slovenian  
7776 Spanish  
7773 Sudanese  
7782 Swahili  
7779 Swedish  
7778 Tagalog  
7865 Tajik  
Code  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Afrikaans  
Albanian  
Amharic  
Arabic  
8381 Galician  
6577 Georgian  
6582 German  
7289 Greek  
6869 Malayalam  
6976 Maori  
Armenian  
Assamese  
Aymara  
6583 Greenlandic  
6588 Guarani  
6590 Gujarati  
6665 Hausa  
7576 Marathi  
7178 Moldavian  
7185 Mongolian  
7265 Nauru  
Azerbaijani  
Bashkir  
Basque  
6985 Hebrew  
6678 Hindi  
7387 Nepali  
7869 Tamil  
Bengali; Bangla  
Bhutani  
Bihari  
7273 Norwegian  
7285 Oriya  
7879 Telugu  
7982 Thai  
6890 Hungarian  
6672 Icelandic  
6682 Indonesian  
6671 Interlingua  
7789 Irish  
7383 Panjabi  
8065 Tonga  
8083 Turkish  
7065 Turkmen  
8076 Twi  
Breton  
7378 Pashto, Pushto  
7365 Persian  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Croatian  
Czech  
7165 Polish  
6669 Italian  
7384 Portuguese  
7465 Quechua  
8084 Ukrainian  
8185 Urdu  
9072 Japanese  
7282 Kannada  
6783 Kashmiri  
6865 Kazakh  
7876 Kirghiz  
7578 Rhaeto-Romance 8277 Uzbek  
6
7583 Rumanian  
7575 Russian  
7589 Samoan  
7579 Sanskrit  
7585 Scots Gaelic  
7679 Serbian  
7665 Serbo-Croatian  
7686 Shona  
8279 Vietnamese  
Danish  
8285 Volapük  
8377 Welsh  
8365 Wolof  
7168 Xhosa  
8382 Yiddish  
8372 Yoruba  
8378 Zulu  
Dutch  
Korean  
English  
6978  
6979  
6984  
7079  
7074  
7073  
Kurdish  
Laotian  
Esperanto  
Estonian  
Faroese  
Fiji  
Latin  
Latvian, Lettish  
Lingala  
7678  
Finnish  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix 41  
Trademarks and  
Licenses  
Manufactured under license under U.S. Patent  
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.  
and worldwide patents issued & pending. DTS,  
the Symbol, & DTS and the Symbol together are  
registered trademarks & DTS 2.0+Digital Out is a  
trademark of DTS, Inc. Product includes software.  
© DTS, Inc. All Rights Reserved.  
Blu-ray Disc™, Blu-ray™, BONUSVIEW™ and  
the logos are trademarks of the Blu-ray Disc  
Association.  
“AVCHDand theAVCHDlogo are trademarks of  
Panasonic Corporation and Sony Corporation.  
“DVD Logois a trademark of DVD Format/Logo  
Licensing Corporation.  
DivX®, DivX Certified® and associated logos are  
trademarks of Rovi Corporation or its subsidiaries  
and are used under license.  
Java is a trademark of Oracle and/or its affiliates.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or registered  
trademarks of HDMI Licensing LLC in the United  
States and other countries.  
6
“x.v.Colouris a trademark of Sony Corporation.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 Appendix  
Cinavia Notice  
This product uses Cinavia technology to limit the  
use of unauthorized copies of some commercially-  
produced film and videos and their soundtracks.  
When a prohibited use of an unauthorized copy is  
detected, a message will be displayed and playback  
or copying will be interrupted.  
More information about Cinavia technology  
is provided at the Cinavia Online Consumer  
request additional information about Cinavia by  
mail, send a postcard with your mailing address  
to: Cinavia Consumer Information Center, P.O. Box  
86851, San Diego, CA, 92138, USA.  
This product incorporates proprietary technology  
under license from Verance Corporation and is  
protected by U.S. Patent 7,369,677 and other U.S.  
and worldwide patents issued and pending as well  
as copyright and trade secret protection for certain  
aspects of such technology. Cinavia is a trademark  
of Verance Corporation. Copyright 2004-2010  
Verance Corporation. All rights reserved by Verance.  
Reverse engineering or disassembly is prohibited.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 43  
Audio Output Specifications  
3
Jack/Setting  
COAXIAL (DIGITAL AUDIO OUT)  
*
Source  
4
BitStream  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS Re-encode  
*
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DTS  
DTS-HD  
DTS  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
Jack/Setting  
Source  
HDMI OUT  
4
1
2
BitStream  
* *  
PCM Stereo  
PCM Multi-Ch  
PCM 2ch  
DTS Re-encode  
*
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital  
PCM 2ch  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
PCM 2ch  
DTS-HD  
PCM 2ch  
DTS-HD  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 2ch  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 5.1ch  
PCM 7.1ch  
6
*1 The secondary and interactive audio may not  
be included in the output bitstream if [Digital  
Output] option is set to [BitStream]. (Except  
LPCM Codec : the output always include  
interactive and secondary audio.)  
*4 If the [Digital Output] option is set to [DTS re-  
encode], the audio output is limited to 48 kHz  
and 5.1Ch. If the [Digital Output] option is set  
to [DTS re-encode], the DTS Re-encode audio  
is outputted for BD-ROM discs, and the original  
audio is outputted for the other discs (like  
[BitStream]).  
*2 This player automatically selects the HDMI audio  
according to the decoding capability of the  
connected HDMI device even though [Digital  
Output] option is set to [BitStream].  
If the HDMI OUT jack is connected to your TV  
with High Speed HDMI™ Cable and Dolby Digital  
Plus/Dolby TrueHD is outputted from HDMI OUT  
jack, COAXIAL OUT jack is limited toPCM 2ch”  
(When the HDMI and DIGITAL AUDIO OUT are  
connected simultaneously).  
y
*3 On the PCM audio output, the sampling  
frequency of DIGITAL AUDIO OUT is limited to  
96 kHz.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44 Appendix  
The audio is outputted as PCM 48 kHz/16 bit for  
MP3/WMA file and PCM 44.1kHz/16 bit for Audio  
CD while playback.  
y
y
You must select a digital audio output and  
a maximum sampling frequency that your  
Amplifier (or AV receiver) accepts using [Digital  
Output] and [Sampling Freq.] options on the  
With digital audio connection (DIGITAL AUDIO  
OUT or HDMI OUT), Disc Menu button sounds of  
BD-ROM may not be heard if the [Digital Output]  
option is set to [BitStream].  
y
y
y
If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound  
or no sound at all.  
Multi-channel Digital Surround Sound via digital  
connection can only be obtained if your receiver  
is equipped with a Digital Multi-channel decoder.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 45  
Specifications  
General  
Power requirements  
AC Adapter  
DC 12 V 01 A  
WA-12M12Fx  
Dimensions (W x H x D)  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
Approx. 270 x 39 x 198 mm  
0.95 Kg  
5 °C to 35 °C  
5 % to 90 %  
Outputs  
HDMI OUT (video/audio)  
19 pin (Type A, HDMI™ Connector)  
0.5 V (p-p), 75 Ω, RCA jack x 1  
DIGITAL AUDIO OUT (COAXIAL)  
System  
Laser  
Semiconductor laser  
wavelength  
405 nm / 650 nm  
Signal system  
Bus Power Supply (USB)  
Standard PAL/NTSC colour TV system  
DC 5 V 0500 mA  
Design and specifications are subject to change without notice.  
y
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 Appendix  
Notes on Discs  
Maintenance  
Handling Discs  
Do not touch the playback side of the disc. Hold  
the disc by the edges so that fingerprints do not  
get on the surface. Never stick paper or tape on the  
disc.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and  
packing materials. If you need to ship the unit, for  
maximum protection, re-pack the unit as it was  
originally packed at the factory.  
Storing Discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution. Do not  
use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the  
unit.  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the centre to out.  
Keeping the exterior surfaces clean  
Do not use strong solvents such as alcohol,  
benzine, thinner, commercially available cleaners,  
or anti-static spray intended for older vinyl records.  
Do not use volatile liquids such as insecticide  
spray near the unit.  
y
y
y
Wiping with strong pressure may damage the  
surface.  
Do not leave rubber or plastic products in  
contact with the unit for a long period of time.  
Maintaining the Unit  
The unit is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty  
or worn, the picture quality could be diminished.  
For details, please contact your nearest authorized  
service centre.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LG Electronics Blu ray Player BD660 User Manual
Lindy Network Card SATA 150 User Manual
Little Wonder Vacuum Cleaner 5612 00 01 User Manual
Lux Products Thermostat PSM200SA User Manual
Magnavox CRT Television 39MF412B User Manual
Magnavox Flat Panel Television LX55 User Manual
Maytag Clothes Dryer W10260037A User Manual
Maytag Washer Dryer MGT3800TW0 User Manual
Melissa Microwave Oven 653064 User Manual
Microsoft Network Router TM 1104 3 User Manual