OWNER’S MANUAL
Network Blu-ray Disc™
Player
Please read this manual carefully before operating
your set and retain it for future reference.
BD640
P/NO : MFL67100462
BD651D-N_US_MP_BALCK.indd
1
2011-01-21 �� 4:58:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
3
Safety Information
CAUTION
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
1
RISK OF ELECTRIC SHOCK
DO NOT OPEN
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
BD651D-N_US_MP_BALCK.indd
3
2011-01-21 �� 4:58:12
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Getting Started
This device is equipped with a portable battery or
accumulator.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
y
y
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
Consult the dealer or an experienced radio/TV
technician for help.
1
CAUTION: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body. End users must follow the
specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any
other antenna or transmitter.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
FCC Compliance Statement
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
Responsible Party :
LG Electronics USA, Inc.1000 Sylvan avenue
Englewood Cliffs, NJ 07632
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
TEL. : +1-800-243-0000
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
y
y
Increase the separation between the equipment
and receiver.
BD651D-N_US_MP_BALCK.indd
4
2011-01-21 �� 4:58:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
5
Notes on Copyrights
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
Because AACS (Advanced Access Content
System) is approved as content protection
system for BD format, similar to use of CSS
(Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
y
1
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Center.
y
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
y
y
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
y
12. Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
BD651D-N_US_MP_BALCK.indd
5
2011-01-21 �� 4:58:13
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of Contents
3
System Setting
Table of Contents
25 Settings
25 – Adjust the Setup Settings
25 – [DISPLAY] Menu
26 – [LANGUAGE] Menu
27 – [AUDIO] Menu
28 – [LOCK] Menu
1
Getting Started
3
8
8
Safety Information
Introduction
– Playable Discs and symbols used in
this manual
29 – [NETWORK] Menu
30 – [OTHERS] Menu
9
9
– About the “7” Symbol Display
– Supplied Accessorries
4
Operating
10 – File compatibility
11
31
General Playback
– AVCHD (Advanced Video Codec High
Definition)
31 – Using [HOME] menu
31 – Playing a Disc
31 – Playing a file on a disc/USB device
32 – Enjoying BD-LiveTM
33 – Basic operations for photo content
33 – Using the disc menu
33 – Resume playback
34 Advanced Playback
34 – Repeat Playback
12 – Certain System Requirements
12 – About Digital Multi-channel sound
12 – Compatibility Notes
12 – Regional Code
13
14
14
Remote control
Front panel
Rear panel
34 – Repeating a specific portion
34 – Enlarge the playback image
35 – Marker Search
2
Connecting
15
Connecting to Your TV
35 – Using the search menu
36 – Changing content list view
36 – Viewing content information
36 – Selecting a subtitle file
37 – Last Scene Memory
37 – Options while viewing a photo
38 – Listening to music while slide show
38 On-Screen display
15 – HDMI Connection
16 – What is SIMPLINK?
16 – Component Video Connection
17
17
– Video/Audio (Left/Right) Connection
– Resolution Setting
18 Connecting to an Amplifier
18 – Connecting to an Amplifier via HDMI
Output
18 – Connecting to an Amplifier via Digital
Audio Output
38 – Displaying content information on-
screen
39 – Playing from selected time
39 – Hearing a different audio
39 – Selecting a subtitle language
40 – Watching from a different angle
40 – Changing the TV Aspect Ratio
40 – Changing the Picture Mode
40 – Changing subtitle code page
19 – Connecting to an Amplifier via 2
Channel Audio Output
19
Connecting to your Home Network
19 – Wired network connection
20 – Wired Network Setup
21 – Wireless Network Connection
22 – Wireless Network Setup
24 USB device connection
41
Audio CD Recording
42 Enjoying the NetCast™ Entertainment
Access
24 – Playback content in the USB device
BD651D-N_US_MP_BALCK.indd
6
2011-01-21 �� 4:58:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
7
5
Troubleshooting
43 Troubleshooting
43 – General
44 – Picture
44 – Sound
1
45 – Network
45 – Customer Support
45 – Open source software notice
2
3
4
5
6
7
6
Appendix
46 Controlling a TV with the Supplied
Remote Control
46 – Setting up the remote to control your
TV
47 Network Software Update
47 – Network update notification
47 – Software Update
49 Area Code List
50 Language Code List
51
52 Audio Output Specifications
54 Video Output Resolution
55 Specifications
Trademarks and Licenses
56 Maintenance
56 – Handling the Unit
56 – Notes on Discs
57 Important Information Relating to
Network Services
7
Warranty
58 Limited Warranty
BD651D-N_US_MP_BALCK.indd
7
2011-01-21 �� 4:58:13
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Media/Term
Logo
Symbol
Description
Discs such as movies that can be purchased or
rented.
y
e
BD-R/RE discs that are recorded in BDAV format.
y
y
Blu-ray
BD-R/RE discs that contain Movie, Music or
Photo files.
y,
u,
i
ISO 9660+JOLIET, UDF and UDF Bridge format.
y
y
Discs such as movies that can be purchased or
rented.
r
DVD-ROM
DVD-R
Video mode and finalized only
Supports the dual layer disc also
y
y
DVD-RW
DVD+R
Finalized AVCHD format
o
DVD+RW
DVD R/RW discs that contain Movie, Music or
Photo files.
y
y
y,
u,
i
(8 cm / 12
cm disc)
ISO 9660+JOLIET, UDF and UDF Bridge format.
DVD-RW
(VR)
VR mode and finalized only
Audio CD
r
(8 cm / 12
cm disc)
Audio CD
t
(8 cm / 12
cm disc)
CD-R/RW discs that contain Movie, Music or
Photo files.
y
y
y,
u,
i
CD-R/RW
(8 cm / 12
cm disc)
ISO 9660+JOLIET, UDF and UDF Bridge format.
Indicates special notes and operating features.
Note
–
–
,
>
Indicates cautions for preventing possible
damages from abuse.
Caution
BD651D-N_US_MP_BALCK.indd
8
2011-01-21 �� 4:58:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
9
Note
,,
About the “ ” Symbol Display
7
Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD R/RW) disc itself, some CD-R/RW (or
DVD R/RW) discs cannot be played on the
unit.
y
“7”may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
1
Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD R/RW, BD-R/RE) may not be playable.
y
y
Supplied Accessorries
BD-R/RE, DVD R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
Wireless LAN Adapter
(USB Type) (1)
Audio / Video Cable (1)
If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
y
This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
y
y
Remote control (1)
Battery (1)
Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
y
y
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
BD651D-N_US_MP_BALCK.indd
9
2011-01-21 �� 4:58:14
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Getting Started
File compatibility
Video files
1
File
Location
File
Extension
Codec Format
Audio Format
Subtitle
“.avi”,“.mpg”,
“.mpeg”,“.mkv”, H.264/MPEG-4 AVC,
“.mp4”,“.asf”,
“.wmv”,“.m4v”
(DRM free)
XVID, MPEG1 SS,
Dolby Digital,
DTS, MP3,
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
(.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
MPEG2 PS, MPEG2 TS WMA, AAC,
Disc,
USB
AC3
Music files
File
Location
File
Extension
Sampling Frequency
Bitrate
Note
Disc,
USB,
“mp3”,“.wma”,
“.wav”,“.m4a”
(DRM free)
within 32 - 48 kHz
(WMA),
within 32 - 192
kbps (WMA),
Some wav files are
not supported on this
player.
within 11 - 48 kHz (MP3) within 8 - 320 kbps
(MP3),
Photo files
File
Location
File
Extension
Recommanded
Size
Note
Disc,
USB,
“.jpg”,“.jpeg”,
“.png”,“.gif”
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
BD651D-N_US_MP_BALCK.indd 10
2011-01-21 �� 4:58:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 11
Note
,,
AVCHD (Advanced Video
The file name is limited to 180 characters.
y
y
Codec High Definition)
A“avi“file which is encoded“WMV 9 codec”
is not supported.
This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
y
1
Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
y
The AVCHD format is a high definition digital
video camera format.
y
y
This unit cannot support the ID3 Tag
embedded MP3 file.
y
y
The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
The total playback time of music file
indicated on the screen may not correct for
VBR files.
This player can playback AVCHD discs using
“x.v.Color”format.
y
y
HD video files contained on the CD or USB
1.0/1.1 may not played properly. Blu-ray disc
, DVD or USB 2.0 are recommended to play
back HD video files.
y
y
y
Some AVCHD format discs may not play
depending on the recording condition.
AVCHD format discs need to be finalized.
y
y
This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. For a file
with higher level, the warning message will
appear on the screen.
“x.v.Color”offers a wider color range than normal
DVD camcorder discs.
This player does not support files that are
recorded with GMC 1 or Qpel
.
2
*
*
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
This player supports UTF-8 files even it
contains Unicode subtitle contents. This
player can not support the pure Unicode
subtitle files.
y
Depending on the types of file or ways of
recording, it may not play back.
y
y
A disc which was recorded by multi-session
on normal PC is not supported on this
player.
To be playback a movie file, movie file name
and Subtitle file name must be the same.
y
y
If video codec is MPEG2 TS or MPEG2 PS,
subtitle does not play back.
BD651D-N_US_MP_BALCK.indd 11
2011-01-21 �� 4:58:14
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Getting Started
Certain System Requirements
Compatibility Notes
For high definition video playback:
Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
y
High definition display that has COMPONENT or
HDMI input jacks.
y
1
BD-ROM disc with high definition content.
y
y
HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1/ Final Standard Profile). Secondary video and
audio can be played from a disc compatible with
the picture-in-picture function. For the playback
method, refer to the instructions in the disc.
y
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
y
Viewing high-definition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
Main, center, surround speakers and subwoofer
as necessary for chosen format.
y
About Digital Multi-channel
sound
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
y
A digital multi-channel connection provides the
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports one
or more of the audio formats supported by your
player. Check the logos on the front of the Audio/
Video receiver and the manual. (PCM Stereo, PCM
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and/or DTS-HD)
Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
You can use a USB device to store some disc
related information, including downloaded on-
line content. The disc you are using will control
how long this information is retained.
y
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or“ALL”.
BD651D-N_US_MP_BALCK.indd 12
2011-01-21 �� 4:58:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started 13
Remote control
• • • • • • a • • • • • •
• • • • • • d • • • • •
1 (POWER): Switches the player ZOOM: Displays or exits the
1
ON or OFF.
[Zoom] menu.
B (OPEN/CLOSE): Opens and
closes the disc tray.
MARKER: Marks any point during
playback.
* : The button is not available for
any function.
SEARCH: Displays or exits the
search menu.
TV Control Buttons: See page 46. TITLE/POP-UP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
0-9 numerical buttons: Selects
numbered options in a menu or
inputs letters in the keypad menu. Colored (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC] and [NetCast].
setting the password.
CLEAR: Removes a mark on the
search menu or a number when
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • •
c/v (SCAN): Searches
backward or forward.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
Z (STOP): Stops playback.
z (PLAY): Starts playback.
M (PAUSE): Pauses playback.
Battery Installation
• • • • • • c • • • • •
HOME (n): Displays or exits the
[Home Menu].
DISC MENU: Accesses menu on a
disc.
Direction buttons: Selects an
option in the menu.
Remove the battery cover on the
rear of the Remote Control, and
insert a R03 (size AAA) battery
with 4 and 5 matched correctly.
ENTER (b): Acknowledges menu
selection.
BACK (x): Exits the menu or
resumes playback. The resume
play function may not work
depending on the BD-ROM disc.
INFO/DISPLAY (m): Displays or
exits On-Screen Display.
BD651D-N_US_MP_BALCK.indd 13
2011-01-21 �� 4:58:14
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Getting Started
Front panel
1
a Disc Tray
e N (PLAY / PAUSE)
f Z (STOP)
b Display Window
c Remote Sensor
d B (OPEN/CLOSE)
g 1 (POWER) Button
h USB Port
Rear panel
a AC power cord
e HDMI OUT
b VIDEO OUT
f DIGITAL AUDIO OUT (COAXIAL)
g LAN port
c 2CH AUDIO OUT (Left/Right)
d COMPONENT VIDEO OUT (Y PB PR)
BD651D-N_US_MP_BALCK.indd 14
2011-01-21 �� 4:58:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 15
HDMI Connection
Connecting to Your TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMITM Cable). Connect the HDMI jack on
the player to the HDMI jack on a HDMI compatible
TV or monitor.
HDMI connection (page 15)
y
y
y
Component Video connection (page 16)
Video connection (page 17)
Note
,,
Rear of the unit
2
Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the unit.
Use only one of the connections described
in this manual.
y
Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
y
y
y
Do not connect the unit’s AUDIO OUT jack
to the phono in jack (record unit) of your
audio system.
HDMI
cable
TV
Do not connect your unit via your VCR.
The image could be distorted by the copy
protection system.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Additional Information for HDMI
When you connect a HDMI or DVI compatible
device make sure of the following:
y
- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
y
- The picture will not be displayed properly
with non-HDCP device.
- This player does not playback and TV screen
is changed to black screen.
BD651D-N_US_MP_BALCK.indd 15
2011-01-21 �� 4:58:15
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Connecting
Note
,,
Component Video Connection
If a connected HDMI device does not accept
y
Connect the COMPONENT VIDEO OUT jacks on the
player to the corresponding input jacks on the TV
using component video cable. Connect the left and
right AUDIO OUT jacks of the player to the audio
left and right IN jacks on the TV using the audio
cables.
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to“Resolution Setting”on page 17).
y
y
y
Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 26).
2
Rear of the
unit
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the unit and then turn it
on again.
When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y
y
If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
Component
video cable
What is SIMPLINK?
Audio
cable
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
TV
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
Note
,,
Note
,,
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for
the output. (Refer to“Resolution setting”on
page 17.)
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
BD651D-N_US_MP_BALCK.indd 16
2011-01-21 �� 4:58:15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 17
Video/Audio (Left/Right)
Connection
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable. Connect
the left and right AUDIO OUT jacks of the player to
the audio left and right IN jacks on the TV using the
audio cables.
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks. You
can change the resolution using [Setup] menu.
1. Press HOME (n).
2. Use a/d to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
3. Use w/s to select [DISPLAY] option then press
d to move to the second level.
2
4. Use w/s to select the [Resolution] option then
Rear of the unit
press ENTER (b) to move to the third level.
5. Use w/s to select the desired resolution then
press ENTER (b) to confirm your selection.
Note
,,
If your TV does not accept the resolution
you have set on the unit, you can set
resolution to 480p as follows:
y
Audio/ Video
cable
TV
1. Press B to open the disc tray.
2
Press Z (STOP) for more than 5 seconds.
Since several factors affect the resolution of
video output, see“Video Output Resolution”
on page 54.
y
y
When you set the HDMI Resolution, over
720p is not outputted to Composit Video.
BD651D-N_US_MP_BALCK.indd 17
2011-01-21 �� 4:58:15
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Connecting
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack.
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
You will need to activate the player’s digital output.
(See“[AUDIO] Menu”on page 27.)
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s DIGITAL AUDIO OUT jack
to the corresponding in jack (COAXIAL) on your
amplifier using an optional digital audio cable.
HDMI Audio connection (page 18)
Digital Audio connection (page 18)
2CH Analog Audio connection (page 19)
y
y
y
2
Since many factors affect the type of audio output,
see“Audio Output Specifications”for details (page
52).
Rear of the unit
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a
HDMI cable.
Rear of the unit
Coaxial
cable
HDMI cable
Receiver/Amplifier
Receiver/Amplifier
HDMI
You will need to activate the player’s digital output.
(See“[AUDIO] Menu”on pages 27.)
cable
TV
BD651D-N_US_MP_BALCK.indd 18
2011-01-21 �� 4:58:16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 19
Connecting to an Amplifier via
2 Channel Audio Output
Connect the Left and Right 2CH AUDIO OUT jacks
on the player to the audio left and right in jacks
on your amplifier, receiver, or stereo system using
audio cables.
Connecting to your
Home Network
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and on-line
content services.
2
Rear of the unit
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
(CAT5 or better with RJ45 connector).
Audio cable
Note
,,
When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
y
Do not connect a modular phone cable to
the LAN port.
y
y
Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
Receiver/Amplifier
BD651D-N_US_MP_BALCK.indd 19
2011-01-21 �� 4:58:16
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Connecting
Broadband
service
2. The [Connection Setting] menu appear on the
screen. Use w/s to select the [Wired] and
press ENTER (b).
2
Router
PC
3. Select [Yes] and press ENTER (b) to continue.
The new connection settings reset the current
network settings.
4. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
Rear of the unit
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Note
,,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using w/s/
a/d and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
5. Select [OK] and press ENTER (b) to apply
network settings.
6. The player will ask you to test the network
connection. Select [OK] and press ENTER (b) to
complete the network connection.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
7. If you select [Test] and press ENTER (b) at
step 5 above, the network connection status is
displayed on the screen.
BD651D-N_US_MP_BALCK.indd 20
2011-01-21 �� 4:58:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 21
You can also test it on the [Connection Status]
in the [Setup] menu.
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
Note
,,
For best performance, a direct wired
connection from this unit to your home
network’s router or cable/DSL modem is
always the best option.
y
y
y
If you do chose to use the wireless option,
note that performance can sometimes be
affected by other electronic devices in the
home.
2
Wireless Network Connection
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
This unit is compatible with the included
Wireless LAN Adapter only ( PW-DN427 ).
You can enjoy the on-line contents by using
supplied Wireless LAN Adapter without Internet
LAN cable.
This player is equipped with an IEEE 802.11n
(2.4 GHz band only) wireless module, which also
supports the 802.11 b/g standards. For the best
wireless performance, we recommend using a IEEE
802.11n certified Wi-Fi network (access point or
wireless router).
Wireless LAN
Adapter
Front of the
unit
Wireless
Communication
Access Point or
Wireless Router
Broadband
service
BD651D-N_US_MP_BALCK.indd 21
2011-01-21 �� 4:58:17
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Connecting
If you have security on your access point or
wireless router, verify that the WEP or WPA key
that was entered into the player matches the
router’s information exactly. You need to input
the security code as necessary.
Wireless Network Setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
Note
,,
WEP security mode generally have 4 keys
available on an access point or wireless
router’s setting. If your access point or
wireless router use WEP security, enter the
security code of the key“No.1”to connect
on your home network.
y
y
Preparation
Before setting the wireless network, you need to:
2
- connect the broadband internet to the wireless
home network.
An Access Point is a device that allows you
to connect to your home network wirelessly.
- set the access point or wireless router.
- note the SSID and security code of the network.
[Manual] – Your access point may not be
broadcasting its access point name (SSID).
Check your router settings through your
computer and either set your router to
broadcast SSID, or manually enter the access
point name (SSID) in [Manual].
- insert the included Wireless LAN Adapter to the
USB port on the front panel.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
[Push Button] – If your access point or
wireless router that supports the Push Button
Configuration method, select this option and
press the Push Button on your access point or
wireless router within 120 counts. You do not
need to know the access point name (SSID) and
security code of your access point or wireless
router.
2. The [Connection Setting] menu appear on the
screen. Use w/s to select [Wireless] and press
ENTER (b).
5. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
3. Select [Yes] and press ENTER (b) to continue.
The new connection settings reset the current
network settings.
Note
,,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using w/s/
a/d and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
4. The player scans the all available access points
or wireless routers within range and display
them as a list. Use w/s to select an access
point or wireless router on the list, and then
press ENTER (b).
BD651D-N_US_MP_BALCK.indd 22
2011-01-21 �� 4:58:18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting 23
6. Select [OK] and press ENTER (b) to apply
Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
y
y
network settings.
7. The player will ask you to test the network
connection. Select [OK] and press ENTER (b) to
complete the network connection.
A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
8. If you select [Test] and press ENTER (b) at
step 7 above, the network connection status is
displayed on the screen. You can also test it on
the [Connection Status] in the [Setup] menu.
You must use a Router to use xDSL service.
y
y
2
A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
Notes on Network Connection:
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
y
Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
y
y
The use of a“Router”may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
y
y
Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
The wireless network operate at 2.4GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
affected by interference from them.
Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
y
y
y
y
y
The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
y
For the purpose of the better transmission,
placing the player from the access point as close
as possible.
In some instances, placing the access point or
wireless router at least 0.45 m (1.5 ft.) above the
floor may improve the reception.
Some internet contents may require a higher
bandwidth connection.
y
y
Move closer to the access point if possible or re-
orient the player so there is nothing between it
and the access point.
Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
y
Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
y
BD651D-N_US_MP_BALCK.indd 23
2011-01-21 �� 4:58:18
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Connecting
Note
,,
USB device connection
This unit supports USB flash drive/external
HDD formatted in FAT16, FAT32 and
NTFS when accessing files (music, photo,
movie). However, for BD-Live and Audio CD
recording, only FAT16 and FAT32 formats
are supported. Use the USB flash drive/
external HDD formatted in either FAT16 or
FAT32 when using BD-Live and Audio CD
recording.
y
This player can play movie, music and photo files
contained in the USB device.
Playback content in the USB
device
1. Insert a USB device to the USB port until it fits
into place.
2
The USB device can be used for the local
storage for enjoying BD-Live discs with
Internet.
y
This unit can support up to 4 partitions of
the USB device.
y
y
y
Do not extract the USB device during
operation (play, etc.).
A USB device which requires additional
program installation when you have
connected it to a computer, is not
supported.
When you connect the USB device on the HOME
menu, the player plays a music file contained in the
USB storage device automatically. If the USB storage
device is containing various types of files, a menu
for the file type selection will appear.
USB device: USB device that supports
USB1.1 and USB2.0.
y
y
Movie, music and photo files can be played.
For details of operations on each file, refer
to relevant pages.
File loading may take few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
Regular back up is recommended to
prevent data loss.
y
y
If you use a USB extension cable, USB HUB
or USB Multi-reader, the USB device may not
be recognized.
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using a/d,
and press ENTER (b).
Some USB device may not work with this
unit.
y
y
y
4. Select the [USB] option using w/s, and press
ENTER (b).
Digital camera and mobile phone are not
supported.
USB Port of the unit cannot be connected
to PC. The unit cannot be used as a storage
device.
5. Select a file using w/s/a/d, and press PLAY
or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
BD651D-N_US_MP_BALCK.indd 24
2011-01-21 �� 4:58:18
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 25
[DISPLAY] Menu
Settings
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
Adjust the Setup Settings
You can change the settings of the unit in the
[Setup] menu.
[4:3 Letter Box]
1. Press HOME (n).
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
2. Use a/d to select the [Setup] and press ENTER
3
(b). The [Setup] menu appears.
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
3. Use w/s to select the first setup option, and
press d to move to the second level.
Note
,,
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
4. Use w/s to select a second setup option, and
press ENTER (b) to move to the third level.
5. Use w/s to select a desired setting, and press
ENTER (b) to confirm your selection.
BD651D-N_US_MP_BALCK.indd 25
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
26 System Setting
Resolution
HDMI Color Setting
Sets the output resolution of the Component and
HDMI video signal. Refer to page 17 and 54 for
details about the resolution setting.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[Auto]
[YCbCr]
If the HDMI OUT jack is connected to
Select when connecting to a HDMI display
device.
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV. If the COMPONENT
VIDEO OUT is only connected, this changes the
resolution to 480i as default resolution
[RGB]
Select when connecting to a DVI display
device.
[480i]
[LANGUAGE] Menu
Outputs 480 lines of interlaced video.
3
[480p]
Display Menu
Select a language for the [Setup] menu and on-
screen display.
Outputs 480 lines of progressive video.
[720p]
Outputs 720 lines of progressive video.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
[Original]
Refers to the original language in which the
disc was recorded.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
50.
Note
,,
When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [60 Hz].
y
y
[Off] (Disc Subtitle only)
Turn off Subtitle.
Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 60 Hz to match the
video source format.
Note
,,
Depending on the disc, your language setting
may not work.
BD651D-N_US_MP_BALCK.indd 26
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 27
Sampling Freq.
(Digital Audio Output)
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the unit’s Audio options according to the type of
audio system you use.
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
Note
,,
Since many factors affect the type of audio
output, see“Audio Output Specifications”on
page 52 for details.
[96 kHz]
HDMI / Digital Output (SPDIF)
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
[PCM Stereo]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder.
3
[PCM Multi-Ch] (HDMI only)
[192 kHz]
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
[DTS Re-Encode]
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
Note
,,
When [HDMI] option is set to [PCM Multi-
Ch], the audio may output as PCM Stereo
if the PCM Multi-Ch information is not
detected from HDMI device with EDID.
y
y
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
If the [HDMI] or [Digital Output (SPDIF)]
option is set to [DTS Re-Encode], the DTS
Re-Encode audio is outputted for BD-ROM
discs with secondary audio and the original
audio is outputted for the other discs (like
[Primary Pass-Thru]).
[Off]
Turns off this function.
Note
,,
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
BD651D-N_US_MP_BALCK.indd 27
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
28 System Setting
DTS Neo:6
[LOCK] Menu
If the unit is connected to the multi-channel Audio
Receiver by HDMI connection, set this option to
enjoy the multi-channel surround sound with the
2-channel audio source.
The [LOCK] settings affect only CinemaNow movie,
Blu-ray Disc and DVD playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
[Off]
Outputs the stereo sound via front speakers.
[Music]
Outputs the multi-channel sounds that are
optimized for listening to music.
Password
You can create or change the password.
[Cinema]
[None]
Outputs the multi-channel sounds that are
optimized for watching movie.
3
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
Note
,,
[Change]
This function is not available on an on-line
service.
y
y
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
Only the audio source with less than 48
kHz sampling frequency is available for this
function.
If you forget your password
This function is availabe only when [HDMI]
option is set to [PCM Multi-Ch].
y
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the unit.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter“210499”. The
password is cleared.
Note
,,
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
BD651D-N_US_MP_BALCK.indd 28
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setting 29
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD Live and NetCast features.
[Rating 1-8]
Connection Setting
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
If your home network environment is ready to
connect the unit, the unit needs to be set the
wired or wireless network connection for network
communication. (See“Connecting to your Home
Network”on pages 19-23.)
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Connection Status
BD Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
If you want to check the network status on this unit,
select the [Connection Status] options and press
ENTER (b) to check whether a connection to the
network and the internet have been established.
3
[255]
All BD-ROM can be played.
BD-LIVE connection
[0-254]
You can restrict Internet access when BD-Live
functions are used.
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
[Permitted]
Note
Internet access is permitted for all BD-Live
contents.
,,
The [BD Rating] will be applied only for the
BD that containing the Advanced Rating
Control.
y
y
[Partially permitted]
Internet access is permitted only for BD-
Live contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-Live contents
without a certificate.
For the region using MPAA rating level, refer
to the table below as an example.
BD Rating
MPAA Rating
0
8
G
PG
[Prohibited]
13
17
18
255
PG-13
R
Internet access is prohibited for all BD-Live
contents.
NC-17
Not restricted
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 49.
BD651D-N_US_MP_BALCK.indd 29
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
30 System Setting
Netflix
Software
[Netflix ESN]
[Information]
Display its unique Netflix ESN (Electronic Serial
Number) that allows you to use the Netflix
streaming.
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see page 47).
[Deactivate Netflix]
Deactivates your unit. To activate the Netflix
again, contact to the service provider.
Disclaimer Notice
Press ENTER (b) to view the notice of Network
Service Disclaimer on page 57.
Deactivate Vudu
You can deactivate your unit from your Vudu
account. It is recommended that you do this if you
give your unit to someone else who should not
share your Vudu account.
3
[OTHERS] Menu
Auto Power Off
The screen saver appears when you leave the unit
in Stop mode for about five minutes. If you set this
option to [On], the unit automatically turns itself off
after the Screen Saver is displayed for 20 minutes.
Set this option to [Off] to leave the screen saver
until the unit is operated by the user.
Initialize
[Factory Set]
You can reset the unit to its original factory
settings.
[BD Storage Clear]
Initializes the BD contents from the connected
USB storage.
Note
,,
If you reset the unit to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
BD651D-N_US_MP_BALCK.indd 30
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 31
Note
,,
General Playback
Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
y
y
Using [HOME] menu
The home menu appears when you press HOME
(n). Use a/d to select a category and press
ENTER (b).
Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
Unfinalized DVD VR format discs may not be
played in this player.
y
y
Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
Playing a file on a disc/USB
device
yui
This unit can play video, audio and photo files
contained in the disc or USB device.
4
a
b
c
d
e
[Movie] - Plays video contents.
1. Insert a data disc on the tray or connect a USB
device. ( When you insert the USB device, the
USB option menu will be appeared to select for
[Movie], [Photo] or [Music].)
[Photo] - Plays photo contents.
[Music] - Plays audio contents.
[NetCast] - Access to the NetCast Home.
[Setup] - Adjusts the system settings.
2. Select [Movie], [Photo] or [Music] using a/d,
and press ENTER (b).
3. Select [Data] or [USB] option using w/s, and
Playing a Disc
press ENTER (b).
ert
4. Select a file using w/s/a/d, and press
z(PLAY) or ENTER (b) to play the file.
1. Press B (OPEN/CLOSE), and place a disc on the
disc tray.
2. Press B (OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3. Press HOME (n).
4. Select [Movie] or [Music] using a/d, and press
ENTER (b).
5. Select [BD],[DVD],[VR] or [Audio], option using
w/s, and press ENTER (b).
BD651D-N_US_MP_BALCK.indd 31
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Operating
Enjoying BD-LiveTM
Note
,,
Some BD-Live contents may be restrictively
accessed in some territories by contents
provider’s own decision.
y
e
Note
,,
It may take up to several minutes to load
and start enjoying BD-Live contents.
y
y
To enjoy the BD-Live feature with a wireless
LAN Adapter, you must use a USB HUB
device by connecting it to the USB port on
the front panel.
y
y
y
USB Flash Drive with 1GB free space must
be connected to the USB port or USB HUB
to enjoy BD-Live feature instead of wireless
LAN adapter.
When you connect USB sticks to the USB
HUB, the number of USB sticks should be
limited to one USB flash memory excluding
the wireless LAN Adapter.
Basic operations for video and
audio content
The USB HUB device is not supplied.
BD-Video supporting BD-Live (BD-ROM version 2
Profile 2) that has a network extension function
allows you to enjoy more functions such as
downloading new movie trailers by connecting this
unit to the internet.
To stop playback
Press Z (STOP) while playback.
To pause playback
1. Check the wired network connection and
settings. (pages 19-23).
Press M (PAUSE) while playback.
Press z (PLAY) to resume playback.
4
2. Insert a USB storage device to the USB port on
the front panel.
To play frame-by-frame (Video)
Press M (PAUSE) while movie playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
A USB storage device is needed to download
bonus content.
3. Press HOME (n), and set the [BD-LIVE
connection] option on the [Setup] menu (page
29).
To scan forward or backward
Press c or v to play fast forward or fast reverse
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
during playback.
You can change the various playback speeds by
pressing c or v repeatedly.
4. Insert a BD-ROM with BD-Live.
The operations are different depending on the
disc. Refer to the manual supplied with the disc.
To slow down the playing speed
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
Caution
>,
Do not extract the connected USB device
while content is being downloaded or a Blu-
ray disc is still in the disc tray. Doing so may
damage the connected USB device and BD-
Live features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
BD651D-N_US_MP_BALCK.indd 32
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 33
Basic operations for photo
content
Resume playback
eroyt,
u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
To play a slide show
Press z (PLAY) to start slide show.
If“MZ (Resume Stop)”appears on the screen
briefly, press z (PLAY) to resume playback (from
the scene point).
To stop a slide show
Press Z (STOP) while slide show.
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)”appears on the screen. The unit
will clear the stopped point.
To pause a slide show
Press M (PAUSE) while slide show.
Press z (PLAY) to re-start the slide show.
Note
,,
The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
y
To skip to the next/previous photo
While viewing a photo in full screen, press a or d
to go to the previous or next photo.
On BD-Video discs with BD-J, the resume
playback function does not work.
y
y
Note
,,
If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
The file requirements are described on page
10.
4
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu while playback, press DISC
MENU.
Use w/s/a/d buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears while playback.
Press TITLE/POP-UP while playback, and use w/s/
a/d buttons to navigate through menu items.
BD651D-N_US_MP_BALCK.indd 33
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Operating
Repeating a specific portion
eroty
This unit can repeat a portion you have selected.
Advanced Playback
Repeat Playback
erotu,
y
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
1. While playback, press REPEAT (h) to select
[A-] at the beginning of the portion you wish to
repeat.
2. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
3. To return to normal playback, press REPEAT
Blu-ray discs/DVDs/ Video
(h) repeatedly to select [Off].
jA- – Selected portion will be repeated continually.
Note
,,
jChapter – The current chapter will be played
back repeatedly.
You cannot select a portion less than 3
seconds.
y
y
jTitle – The current title will be played back
repeatedly.
This function may not work on some disc or
title.
jAll - All the tracks or files will be played back
repeatedly.
Enlarge the playback image
eroyi
1. During playback or pause mode, press ZOOM to
display the [Zoom] menu.
To return to normal playback, press REPEAT (h)
4
repeatedly to select [Off].
Audio CDs/Audio files
kA-B – Selected portion will be repeated
continually. (Audio CD only)
2. Use red (R) or green (G) colored button to zoom
out or in the picture. You can move through the
zoomed picture using w/s/a/d buttons.
;Track– The current track or file will be played
back repeatedly.
:All – All the tracks or files will be played back
repeatedly.
3. To return to the normal picture size, press yellow
(Y) colored button.
l:All – All the tracks or files will be played
back repeatedly in random order.
4. Press BACK (x) to exit the [Zoom] menu.
Note
,,
l,– The tracks or files will be played back in
random order.
On BD-Video discs with BD-J, zoom function
does not work.
To return to normal playback, press CLEAR.
Note
,,
If you press V once during Repeat
Chapter/Track playback, the repeat playback
cancels.
y
y
This function may not work on some disc or
title.
BD651D-N_US_MP_BALCK.indd 34
2011-01-21 �� 4:58:19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 35
Marker Search
Using the search menu
eroy
You can start playback from up to nine memorized
points.
eroy
Using search menu, you can easily to find the point
where you want to start playback.
To enter a marker
To search a point
1. While playback, press MARKER at the desired
point. The Marker icon appears on the TV screen
briefly.
1. During playback, press SEARCH to display the
search menu.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears on
the screen.
2. Press a/d to skip the playback 15 seconds
forward or backward. You can select a point that
you want to skip by pressing and holding a/d
button.
2. Press a number button to select a marker
number that you want to recall. Playback starts
from the marked scene.
To start playback from a marked
scene
1. Press SEARCH and the search menu appears on
the screen.
To delete a Marker
1. Press SEARCH and the search menu appears on
the screen.
4
2. Press s to highlight a marker number. Use a/
d to select a marked scene that you want to
start playback.
3. Press ENTER (b) to start playback from the
marked scene.
2. Press s to highlight a marker number.
Use a/d to select a marked scene that you
want to delete.
Note
,,
This function may not work depending on
discs, titles and file type.
3. Press CLEAR and the marked scene is erased
from the search menu.
Note
,,
This function may not work depending on
discs, titles, server ability.
y
y
All marked points are cleared if the title
is in complete stop (Z) mode, the title is
changed or if you unload the disc.
If the total length of the title is less than 10
seconds, this function is not available.
y
BD651D-N_US_MP_BALCK.indd 35
2011-01-21 �� 4:58:20
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Operating
Changing content list view
Viewing content information
yui
On the [Movie], [Music] or [Photo] menu, you can
change the content list view.
y
The unit can display the content information.
1. Select a file using w/s/a/d.
2. Press INFO/DISPLAY (m) to display the option
Method 1
Press red (R) colored button repeatedly.
menu.
3. Select the [Information] option using w/s, and
press ENTER (b).
The file information appears on the screen.
While movie playback, you can display the file
information by pressing TITLE/POP-UP.
Note
,,
The information displayed on the screen
may not correct comparing actual content
information.
Selecting a subtitle file
4
y
If the subtitle file name is different from the movie
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Use w/s/a/d to select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
Method 2
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the movie file.
1. On the content list, press INFO/DISPLAY (m) to
display the option menu.
Note
2. Use w/s to select the [View Change] option.
,,
If you press Z (STOP) while playback, the
y
y
3. Press ENTER (b) to change the content list
subtitle selection is cancelled.
view.
This function is not available for playing file
on a server via home network.
BD651D-N_US_MP_BALCK.indd 36
2011-01-21 �� 4:58:20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 37
Last Scene Memory
Options while viewing a photo
er
i
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press INFO/
DISPLAY (m) to display the option menu.
2. Select an option using w/s.
Note
,,
Last Scene Memory function for a previous
disc is erased once a different disc is played.
y
y
y
y
This function may not work depending on
the disc.
On BD-Video discs with BD-J, the last scene
memory function does not work.
This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
a Current photo/Total number of photos
4
– Use a/d to view previous/next photo.
b Slide Show – Press ENTER (b) to start or
pause slide show.
c Music Select – Select the background
music for the slide show (page 38).
d Music –Press ENTER (b) to start or pause
background music.
e Rotate – Press ENTER (b) to rotate the
photo clockwise.
f Zoom – Press ENTER (b) to display the
[Zoom] menu.
g Effect – Use a/d to select a transition
effect between photos in a slide show.
h Speed – Use a/d to select a delaying
speed between photos in a slide show.
3. Press BACK(x) to exit the option menu.
BD651D-N_US_MP_BALCK.indd 37
2011-01-21 �� 4:58:21
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Operating
Listening to music while slide
show
On-Screen display
You can display and adjust various information and
settings about the content.
i
You can display photo files while listening to audio
files.
Displaying content information
on-screen
1. While viewing a photo in full screen, press INFO/
DISPLAY (m) to display the option menu.
2. Use w/s to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
eroy
1. While playback, press INFO/DISPLAY (m) to
show various playback information.
3. Use w/s to select a device, and press ENTER
(b).
4. Use w/s to select a file or a folder you wish to
play.
4
Select g and press ENTER (b) to display the
upper directory.
a Title – current title number/total number of
titles
Note
,,
b Chapter – current chapter number/total
When selecting music file from folder selection
is not available. Only file selection is available.
number of chapters
c Time – elapsed playing time/total playback
time
5. Use d to select [OK], and press ENTER (b) to
complete music selection.
d Audio – selected audio language or channel
e Subtitle – selected subtitle.
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect Ratio
h Picture Mode – selected picture mode
BD651D-N_US_MP_BALCK.indd 38
2011-01-21 �� 4:58:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 39
2. Select an option using w/s.
Hearing a different audio
3. Use a/d to adjust the selected option value.
4. Press BACK (x) to exit the On-Screen display.
eroy
1. During playback, press INFO/DISPLAY (m) to
Note
,,
display the On-Screen display.
If no button is pressed for a few seconds,
the on-screen display disappears.
y
y
y
y
2. Use w/s to select the [Audio] option.
3. Use a/d to select desired audio language,
A title number cannot be selected on some
discs.
audio track or audio channel.
Note
,,
Available items may differ depending on
discs or titles.
Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POP-UP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
y
If BD interactive title is playing back, some
setting information is displayed on the
screen but prohibited to be changed.
Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
y
y
Playing from selected time
eroy
1. Press INFO/DISPLAY (m) during playback. The
time search box shows the elapsed playing
time.
On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
4
2. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
Selecting a subtitle language
eroy
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter“21020”.
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
Press a/d to skip the playback 60 seconds
2. Use w/s to select the [Subtitle] option.
3. Use a/d to select desired subtitle language.
4. Press BACK (x) to exit the On-Screen display.
forward or backward.
3. Press ENTER (b) to start playback from selected
time.
Note
,,
Note
,,
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POP-UP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
This function may not work on some disc or
titles.
BD651D-N_US_MP_BALCK.indd 39
2011-01-21 �� 4:58:21
Download from Www.Somanuals.com. All Manuals Search And Download.
40 Operating
Setting the [User] option
Watching from a different
angle
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
er
2. Use w/s to select the [Picture Mode] option.
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
3. Use a/d to select the [User setting] option,
and press ENTER (b).
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
2. Use w/s to select the [Angle] option.
3. Use a/d to select desired angle.
4. Press BACK (x) to exit the On-Screen display.
Changing the TV Aspect Ratio
eroy
4. Use
to adjust the [Picture Mode]
w/s/a/d
options.
You can change the TV aspect ratio setting while
playback.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
4
1. During playback, press INFO/DISPLAY (m) to
5. Use w/s/a/d to select the [Close] option,
display the On-Screen display.
and press ENTER (b) to finish setting.
2. Use w/s to select the [TV Aspect Ratio]
option.
Changing subtitle code page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
3. Use a/d to select desired option.
4. Press BACK (x) to exit the On-Screen display.
Note
,,
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Setup] menu is
not changed.
1. During playback, press INFO/DISPLAY (m) to
display the playback menu.
2. Use w/s to select the [Code Page] option.
3. Use a/d to select desired code option.
Changing the Picture Mode
eroy
You can change the [Picture mode] option while
playback.
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
2. Use w/s to select the [Picture Mode] option.
3. Use a/d to select desired option.
4. Press BACK (x) to exit the On-Screen display.
4. Press BACK (x) to exit the On-Screen display.
BD651D-N_US_MP_BALCK.indd 40
2011-01-21 �� 4:58:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating 41
8. Use w/s/a/d to select [OK], and press
Audio CD Recording
You can record one desired track or all of the tracks
in Audio CD to a USB storage device.
ENTER (b) to start Audio CD recording.
If you want to stop in progressing Audio CD
recording, press ENTER (b) while [Cancel] is
highlighted.
1. Insert a USB storage device to the USB port on
the front panel.
9. A message appears when Audio CD recording is
completed. Press ENTER (b) to check the music
file created in the destination folder.
2. Press B (OPEN/CLOSE), and place an Audio CD
on the disc tray.
Note
,,
Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
The table below shows the average
recording time from an audio track with
4 minutes of playback time to a music file
with 192 kbps as an example.
y
3. Press INFO/DISPLAY (m) to display the option
menu.
4. Use w/s to select [CD Recording] option, and
stop mode
1 min.
while playback
4 min.
press ENTER (b).
5. Use w/s to select a track you wish to copy on
the menu, and press ENTER (b).
Recording times in the table above are
approximate.
y
y
Repeat this step to select tracks as many as you
can.
Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
4
Selects all the tracks on an
Audio CD.
Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
y
Selects an encoding option
from the pop-up menu
(128kbps, 192kbps, 320kbps).
The length of the music should be longer
than 20 seconds for the proper recording.
y
y
Cancels the recording and
returns to the previous screen.
Do not turn off this unit or extract the
connected USB storage device during Audio
CD recording.
6. Use w/s/a/d to select [Start], and press
ENTER (b).
Caution
>,
7. Use w/s/a/d to select a destination folder
The recording or copying features on
this player are provided for your personel
and noncommercial use. The making of
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
to be copied.
If you want to create a new folder, use
w/s/a/d to select [New Folder] and press
ENTER (b).
Be Responsible
Respect Copyrights
Enter a folder name using virtual keyboard, and
press ENTER (b) while [OK] is selected.
BD651D-N_US_MP_BALCK.indd 41
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
42 Operating
Enjoying the NetCast™
Entertainment Access
You can use various content services via Internet
with the NetCast Entertainment Access feature.
1. Check the network connection and settings
(pages 19-23).
2. Press HOME (n).
3. Select the [NetCast] using a/d, and press
ENTER (b).
4. Select an option using a/d, and press ENTER
(b).
4
Note
,,
Detailed information of each service,
contact to the content provider or visit
support link of the service.
y
y
The content of NetCast services and service
related information, including user interface,
is subject to changes. Please refer to the
web site of each service for most up-to-date
information.
Using NetCast with wireless network
connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
y
BD651D-N_US_MP_BALCK.indd 42
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 43
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
Plug the power cord into the wall outlet securely.
y
The unit does not start
playback.
Insert a playable disc. (Check the disc type, colour system, and
regional code.)
y
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
y
y
y
y
Cancel the Rating function or change the rating level.
The angle cannot be changed.
Multi-angles are not recorded on the DVD Video being played.
y
Cannot play movie, photo or
music files.
The files are not recorded in a format that the unit can play.
The unit does not support the codec of the movie file.
y
y
The remote control does not
work properly.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
y
y
y
y
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
5
The unit is plugged in, but the You can reset the unit as follows.
power will not turn on or off.
Unplug the power cord, wait at least five seconds, and then plug it in
y
again.
The unit is not operating
normally.
BD651D-N_US_MP_BALCK.indd 43
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Troubleshooting
Picture
Symptom
Cause & Solution
There is no picture.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
y
Connect the video connection securely.
y
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
Your TV may not suppot the resolution you have set on the unit.
Change the resolution that your TV accepts.
y
y
The unit’s HDMI OUT jack is connected to a DVI device that does not
support copyright protection.
Picture noise appears
You are playing a disc recorded in a colour system that is different
from your TV.
y
y
Set the resolution which your TV accepts.
Sound
Symptom
Cause & Solution
There is no sound or the
sound is distorted.
Connect the audio connection securely.
y
y
5
The input source setting on the amplifier or the connection to the
amplifier is incorrect.
The unit is in scan, slow motion, or pause mode.
The sound volume is low.
y
y
y
Check that the connected amplifier is compatible with audio format
output from the unit.
The unit’s HDMI OUT jack is connected to a DVI device. The DVI jack
does not accept audio signal.
y
y
Check the device connected to unit’s HDMI OUT jack is compatible
with audio format output from the unit.
BD651D-N_US_MP_BALCK.indd 44
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 45
Network
Symptom
Cause & Solution
BD-Live feature does not
work.
The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
y
y
y
Ensure that the unit is correctly connected to the local area network
and can access the internet (see pages 19-23).
Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
The [BD-LIVE connection] option in the [Setup] menu is set to
[Prohibited]. Set the option to [Permitted].
y
y
Streaming video services
(such as YouTube™, etc.) are
often stopped or“buffer”
during playback.
Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Cannot connect the player to
the access point or wireless
LAN router.
The wireless communication may be interrupted from household
devices that are using radio frequencies. Move the player away from
them.
y
Customer Support
You can update the Unit using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this unit (if updates have been made),
5
Open source software notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
available to download with the source code.
BD651D-N_US_MP_BALCK.indd 45
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Appendix
Setting up the remote to
control your TV
Controlling a TV with
the Supplied Remote
Control
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
You can control your TV using the buttons below.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
LG
Code Number
1(Default), 2
Zenith
1, 3, 4
1, 2
6, 7
8, 9
4
GoldStar
Samsung
Sony
By pressing
You can
Hitachi
1 (TV POWER)
Turn the TV on or off.
2. Release the 1 (TV POWER) button to complete
Switch the TV’s input source
between the TV and other
input sources.
setting.
AV/INPUT
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Scan up or down through
memorized channels.
PR/CH +/–
VOL +/–
Adjust the volume of the TV
6
Turn the TV’s volume on
or off.
TV MUTE
Note
,,
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
BD651D-N_US_MP_BALCK.indd 46
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 47
Software Update
Network Software
Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
Network update notification
Note
,,
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Before updating the software in your player,
remove any disc and USB Device from the
player.
y
Before updating the software in your player,
turn the player off and then turn it back on.
y
y
During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
If you cancel the update, turn off the power
and turn it on for stable performance.
y
y
2. Use a/d to select a desired option and then
This unit cannot be updated to previous
software version.
press ENTER (b).
1. Check the network connection and settings
(page 19-23).
2. Select [Software] option in the [Setup] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
[OK]
Starts the software update.
6
[Cancel]
Exits the update menu and
displays it next booting.
[Hide]
Exits the update menu and
it does not appear until next
software is uploaded in the
update server.
The player will check for the newest update.
Note
,,
Pressing ENTER (b) while checking for the
y
y
Option 2:
update will end the process.
If the software update is available from the update
server, the“Update”icon appears at the bottom of
the Home menu. Press blue (B) colored button to
start the update procedure.
If there is no update available, the Message,
“No update is found.”appears. Press ENTER
(b) to return to the [Home Menu].
4. If newer version exists, the message“A new
update was found. Do you want to download
it?”appears.
BD651D-N_US_MP_BALCK.indd 47
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Appendix
5. Select [OK] to download the update. (Selecting
[Cancel] will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?”appears.
8. Select [OK] to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To update
software the next time, the software update
procedure has to be started from the beginning
again.)
Caution
>,
Do not turn off the power during the software
update.
Note
,,
If the software includes the driver update, disc
tray may open during the process.
9. When update is completed, the power will be
turned automatically in a few seconds.
10. Turn the power back on. The system now
operates with the new version.
Note
,,
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to“Customer Support”on page
45.
6
BD651D-N_US_MP_BALCK.indd 48
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 49
Area Code List
Choose an area code from this list.
Area
Code Area
AF Fiji
Code Area
FJ Monaco
Code Area
Code
Afghanistan
Argentina
Australia
Austria
MC Singapore
SG
AR Finland
AU France
AT Germany
BE Great Britain
BT Greece
BO Greenland
BR Hong Kong
KH Hungary
CA India
FI Mongolia
FR Morocco
DE Nepal
MN Slovak Republic
MA Slovenia
NP South Africa
NL South Korea
AN Spain
SK
SI
ZA
KR
Belgium
Bhutan
GB Netherlands
GR Antilles
GL New Zealand
HK Nigeria
HU Norway
IN Oman
ES
Bolivia
NZ Sri Lanka
NG Sweden
NO Switzerland
OM Taiwan
LK
Brazil
SE
Cambodia
Canada
Chile
CH
TW
TH
TR
CL Indonesia
CN Israel
ID Pakistan
IL Panama
PK Thailand
PA Turkey
China
Colombia
Congo
CO Italy
IT Paraguay
JM Philippines
JP Poland
PY Uganda
UG
UA
US
UY
UZ
VN
ZW
CG Jamaica
CR Japan
PH Ukraine
Costa Rica
Croatia
PL United States
PT Uruguay
RO Uzbekistan
Vietnam
HR Kenya
KE Portugal
KW Romania
LY Russian
Czech Republic
Denmark
Ecuador
Egypt
CZ Kuwait
DK Libya
Federation
RU
EC Luxembourg
EG Malaysia
SV Maldives
ET Mexico
LU
Zimbabwe
Saudi Arabia
MY
SA
SN
Senegal
6
El Salvador
Ethiopia
MV
MX
BD651D-N_US_MP_BALCK.indd 49
2011-01-21 �� 4:58:22
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Afar
Code Language
6565 French
6570 Frisian
Code Language
7082 Lithuanian
7089 Macedonian
7176 Malagasy
7565 Malay
Code Language
7684 Sindhi
7775 Singhalese
7771 Slovak
7783 Slovenian
7776 Spanish
7773 Sudanese
7782 Swahili
7779 Swedish
7778 Tagalog
7865 Tajik
Code
8368
8373
8375
8376
6983
8385
8387
8386
8476
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Afrikaans
Albanian
Ameharic
Arabic
8381 Galician
6577 Georgian
6582 German
7289 Greek
6869 Malayalam
6976 Maori
Armenian
Assamese
Aymara
6583 Greenlandic
6588 Guarani
6590 Gujarati
6665 Hausa
7576 Marathi
7178 Moldavian
7185 Mongolian
7265 Nauru
Azerbaijani
Bashkir
Basque
6985 Hebrew
6678 Hindi
7387 Nepali
7869 Tamil
Bengali; Bangla
Bhutani
Bihari
7273 Norwegian
7285 Oriya
7879 Telugu
7982 Thai
6890 Hungarian
6672 Icelandic
6682 Indonesian
6671 Interlingua
7789 Irish
7383 Panjabi
8065 Tonga
8083 Turkish
7065 Turkmen
8076 Twi
Breton
7378 Pashto, Pushto
7365 Persian
Bulgarian
Burmese
Byelorussian
Chinese
Croatian
Czech
7165 Polish
6669 Italian
7384 Portuguese
7465 Quechua
8084 Ukrainian
8185 Urdu
9072 Japanese
7282 Kannada
6783 Kashmiri
6865 Kazakh
7876 Kirghiz
7578 Rhaeto-Romance 8277 Uzbek
6
7583 Rumanian
7575 Russian
7589 Samoan
7579 Sanskrit
7585 Scots Gaelic
7679 Serbian
7665 Serbo-Croatian
7686 Shona
8279 Vietnamese
Danish
8285 Volapük
8377 Welsh
8365 Wolof
7168 Xhosa
8382 Yiddish
8372 Yoruba
8378 Zulu
Dutch
Korean
English
6978
6979
6984
7079
7074
7073
Kurdish
Esperanto
Estonian
Faroese
Fiji
Laothian
Latin
Latvian, Lettish
Lingala
7678
Finnish
BD651D-N_US_MP_BALCK.indd 50
2011-01-21 �� 4:58:23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 51
Trademarks and
Licenses
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide
patents issued & pending. DTS and the symbol
are registered trademarks, & DTS-HD, DTS-HD
Master Audio, and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
Blu-ray Disc™, Blu-ray™, BD-Live™, BONUSVIEW™
and the logos are trademarks of the Blu-ray Disc
Association.
“DVD Logo”is a trademark of DVD Format/Logo
Licensing Corporation.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
“AVCHD”and the“AVCHD”logo are trademarks of
Panasonic Corporation and Sony Corporation.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
“x.v.Color”is a trademark of Sony Corporation.
6
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
BD651D-N_US_MP_BALCK.indd 51
2011-01-21 �� 4:58:23
Download from Www.Somanuals.com. All Manuals Search And Download.
52 Appendix
Audio Output Specifications
3
Jack/Setting
Digital Output (SPDIF) (DIGITAL AUDIO OUT)
*
Analog
Source
2CH Output
4
Primary Pass-Thru
Dolby Digital
Dolby Digital
Dolby Digital
DTS
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS Re-encode
*
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS
DTS (2 ch)
DTS
DTS-HD
DTS
DTS
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
DTS
PCM 2ch
DTS
PCM 2ch
DTS
PCM 2ch
Jack/Setting
Source
HDMI OUT
1
2
4
Primary Pass-Thru
* *
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch
PCM 2ch
DTS Re-encode
*
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS
DTS
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
PCM 2ch
PCM 2ch
DTS (2 ch)
DTS
PCM 5.1ch
PCM 7.1ch
PCM 2ch
DTS-HD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 5.1ch
PCM 7.1ch
DTS
DTS
6
*1 The secondary and interactive audio may
not be included in the output bitstream if
[Digital Output (SPDIF)] or [HDMI] option is set
to [Primary Pass-Thru]. (Except LPCM Codec
: the output always include interactive and
secondary audio.)
*3 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited to
96 kHz.
*4 If the [HDMI] or [Digital Output (SPDIF)] option
is set to [DTS re-encode], the audio output is
limited to 48 kHz and 5.1Ch. If the [HDMI] or
[Digital Output (SPDIF)] option is set to [DTS re-
encode], the DTS Re-encode audio is outputted
for BD-ROM discs, and the original audio is
outputted for the other discs (like [Primary Pass-
Thru]).
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [HDMI]
option is set to [Primary Pass-Thru].
BD651D-N_US_MP_BALCK.indd 52
2011-01-21 �� 4:58:23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 53
The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD while playback.
y
y
The Dolby TrueHD audio recorded on some Blu-
ray discs consists of Dolby Digital and TrueHD
audio. Dolby Digital audio is output through
DIGITAL AUDIO OUT jacks and“DD”displays on
the screen if TrueHD audio is not output (for
example, when [HDMI] is set to [PCM Stereo] and
[Digital Output (SPDIF)] is set to [Primary Pass-
Thru]).
You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using [Digital
Output (SPDIF)], [HDMI] and [Sampling Freq.]
options on the [Setup] menu (see page27).
y
y
With digital audio connection (DIGITAL AUDIO
OUT or HDMI), Disc Menu button sounds of BD-
ROM may not be heard if the [Digital Output
(SPDIF)] or [HDMI] option is set to [Primary Pass-
Thru].
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
y
y
Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
6
BD651D-N_US_MP_BALCK.indd 53
2011-01-21 �� 4:58:23
Download from Www.Somanuals.com. All Manuals Search And Download.
54 Appendix
Video Output Resolution
When the non-copy protected media is playing back
Video Out
COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
HDMI OUT
Resolution
480i
480p
480p
480p
480i
480p
720p
1080i
720p
720p
1080i
1080i
1080p/24 Hz
1080p / 60 Hz
1080p / 24 Hz
1080p / 60 Hz
-
1080i
1080i
When the copy protected media is playing back
Video Out
COMPONENT VIDEO OUT
HDMI OUT
Resolution
HDMI connected
HDMI disconnected
480i
480p
480p
480p
480i
480i
720p
720p
-
-
-
-
480i
480i
480i
480i
1080i
1080i
1080p/24 Hz
1080p / 60 Hz
1080p / 24 Hz
1080p / 60 Hz
HDMI OUT connection
COMPONENT VIDEO OUT
Connection
Blu-ray disc , DVD, Netflix or CinemaNow video
stream could prevent up-scaling on analog output.
If you select a resolution manually and then
connect the HDMI jack to TV and your TV does
not accept it, the resolution setting is set to
[Auto].
y
6
If you select a resolution that your TV does not
accept, the warning message will appear. After
resolution change, if you cannot see the screen,
please wait 20 seconds and the resolution
will automatically revert back to the previous
resolution.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 480i resolution.
y
The 1080p video output frame rate may
be automatically set to either 24 Hz or 60
Hz depending both on the capability and
preference of the connected TV and based on
the native video frame rate of the content on the
BD-ROM disc.
y
BD651D-N_US_MP_BALCK.indd 54
2011-01-21 �� 4:58:23
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 55
Specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
AC 120 V ~ 60 Hz
14 W
Approx. 430 x 45 x 190 mm (16.9 x 1.7 x 7.4 inches)
1.6 kg (3.5 lbs)
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (Type A, HDMI™ Connector)
COMPONENT VIDEO OUT
HDMI OUT (video/audio)
ANALOG AUDIO OUT
DIGITAL OUT (COAXIAL)
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
0.5 V (p-p), 75 Ω, RCA jack x 1
System
Laser
Semiconductor laser, wavelength: 405 nm / 650 nm
405 nm / 650 nm
wavelength
Signal system
Standard NTSC color TV system
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
More than 90 dB (ANALOG OUT connectors only)
Less than 0.02%
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
LAN port
6
More than 95 dB
Ethernet jack x 1, 10BASE-T / 100BASE-TX
DC 5 V 0 500 mA
Bus Power Supply (USB)
Wireless LAN Adapter (PW-DN427)
Interface
USB 2.0 Connector
Standards
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
2.4 ~ 2.4835 GHz
Frequency
Data Security
WPA, 64/128bit WEP, TKIP/AES, IEEE 802.1 X authentication
Design and specifications are subject to change without notice.
y
BD651D-N_US_MP_BALCK.indd 55
2011-01-21 �� 4:58:24
Download from Www.Somanuals.com. All Manuals Search And Download.
56 Appendix
Notes on Discs
Maintenance
Handling Discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide
spray near the unit.
y
y
y
Cleaning Discs
Wiping with strong pressure may damage the
surface.
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
6
BD651D-N_US_MP_BALCK.indd 56
2011-01-21 �� 4:58:24
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 57
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a“Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-
date information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
BD651D-N_US_MP_BALCK.indd 57
2011-01-21 �� 4:58:24
Download from Www.Somanuals.com. All Manuals Search And Download.
58 Warranty
Warranty
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced with refurnished units, at LG’s option, if it proves to
be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”)
listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This
warranty is good only to the original purchaser of the product and effective only when used in the United
States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 Days from the Date of
Purchase.
Call 1-800-243-0000 for instructions on getting the defective
unit repaired or replaced.
PARTS: One Year from the Date of
Purchase.
Please retain dated sales receipt and your box to return the
unit to LG for repair or replacement.
Parts replaced are warranted for the
remaining portion of the original
warranty period
Shipping both ways will be paid by LG during the Warranty
Period. After the Warranty Period, you pay inbound shipping
charges and LG pays return shipping charges.
y
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO
THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE
EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR
PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental
or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or
limitation may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
Damages or operating problems that result from shipping, installation, adjustment of user controls,
calibration, maintenance or failure to maintain, or separate system components; and
y
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide,
accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect
electrical current or voltage, reception problem caused by inadequate home antenna or faulty antenna
connections, computer software, institutional or commercial use, or other causes not arising out of defect
in material or workmanship.
y
7
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center,
Where to buy, Product Assistance, or
Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year) and
select appropriate options from the menu.
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
BD651D-N_US_MP_BALCK.indd 58
2011-01-21 �� 4:58:24
Download from Www.Somanuals.com. All Manuals Search And Download.
BD651D-N_US_MP_BALCK.indd 59
2011-01-21 �� 4:58:24
Download from Www.Somanuals.com. All Manuals Search And Download.
As an Energy Star® Partner,
LG has determined that this
product or product models
meet the Energy Star®
LG Customer Information Center
1-800-243-0000
1-888-865-3026
USA, Consumer
USA, Commercial
guidelines for energy efficiency.
Register your product Online!
®
Energy Star is a U.S. registered mark.
Printed in China
BD651D-N_US_MP_BALCK.indd 60
2011-01-21 �� 4:58:24
Download from Www.Somanuals.com. All Manuals Search And Download.
|