Download from Www.Somanuals.com. All Manuals Search And Download.
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general
population. The guidelines are based on standards
that were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg.* Tests for SAR are conducted using
standard operating positions specified by the FCC
with the phone transmitting at its highest certified
power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a wireless base station
antenna, the lower the power output.
The body-worn SAR values provided above were
obtained by using Kyocera Wireless Corp. [KWC]
supplied and approved case CV90-61296-01 and
holster CV90-L8010-01.
While there may be differences between the SAR levels
of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF emission guidelines.
SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section
http://www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFKWC-KX2.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet Association
(CTIA) web-site at
.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
Caution
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the warranty and user’s
authority to operate the equipment.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR values for
this model phone are:
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to optimize
the performance and life of your phone and battery.
Air bags
If your vehicle has an air bag, DO NOT place installed
or portable phone equipment or other objects over the
air bag or in the air bag deployment area. If equipment
is not properly installed, you and your passengers risk
serious injury.
AMPS mode – Head: 1.32 mW/g; Body-worn: 0.608 mW/g
PCS mode – Head: 0.85 mW/g; Body-worn: 0.310 mW/g
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements.
Download from Www.Somanuals.com. All Manuals Search And Download.
Blasting areas—Turn off your phone where blasting is in
progress. Observe restrictions, and follow any
regulations or rules.
Potentially explosive atmospheres—Turn off your phone
when you are in any area with a potentially explosive
atmosphere. Obey all signs and instructions. Sparks in
such areas could cause an explosion or fire, resulting
in bodily injury or death.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have been
shown to interfere with pacemakers. The phone
should be kept at least six (6) inches away from the
pacemaker to reduce risk.
The Health Industry Manufacturers Association and
the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include:
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker when
the phone is turned on.
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
•
•
•
If you have any reason to suspect that interference
is taking place, turn off your phone immediately.
•
•
Hearing aids—Some digital wireless phones may interfere
with hearing aids. In the event of such interference, you
may want to consult your service provider or call the
customer service line to discuss alternatives.
Use with care
Other medical devices—If you use any other personal
medical device, consult the manufacturer of the
device to determine if it is adequately shielded from
external RF energy. Your physician may be able to
help you obtain this information.
In health care facilities—Turn your phone off in health
care facilities when instructed. Hospitals and health
care facilities may be using equipment that is sensitive
to external RF energy.
Use only in normal position (to ear). Avoid dropping,
hitting, bending, or sitting on the phone.
Keep phone dry
If the phone gets wet, turn the power off immediately
and contact your dealer. Water damage may not be
covered under warranty.
Resetting the phone
If the screen seems frozen and the keypad does not
respond to keypresses, reset the phone by completing
the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
Aircraft—FCC regulations prohibit using your phone on
a plane that is in the air. Turn your phone off or switch
it to Airplane Mode before boarding aircraft.
If the problem persists, return the phone to the dealer
for service.
Vehicles—RF signals may affect improperly installed
or inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer of the device
to determine if it is adequately shielded from external
RF energy.
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Battery and charger specifications
Use only Kyocera-approved accessories with Kyocera
phones. Use of any unauthorized accessories may be
dangerous and will invalidate the phone warranty if said
accessories cause damage or a defect to the phone.
Charger
Input
Output
CV90-60858-01
CV90-60859-01
Standard Battery:
100-240 VAC / 50/60 Hz
120 VAC / 60Hz
4.5 V 1.5 A
5.2 V 400 mA
To shop online for phone accessories, visit
To order by phone, call (800) 349-4188
(U.S.A. only) or (858) 882-1410.
.
CV90-L6501-01: 3.7 V / 900 mAh
Extended Battery:
CV90-L6540-01; 3.7 V / 1400 mAh
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power of
the RF signal. This power level can range from 0.006
to 0.6 watts.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety
standards previously set by both U.S. and
093 453 037
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit
international standards bodies in the following reports:
•
•
•
ANSI C95.1 (American National Standards
Institute, 1992)
NCRP Report 86 (National Council on Radiation
Protection and Measurements, 1986)
ICNIRP (International Commission on Non-
Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by these
reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies with
the Phase I and Phase II E911 Mandates issued by
the FCC.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
8
9
Sending and Receiving
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1
Getting to know your phone . . . . . . . . . . . . . . . . 3
Accessing keypad shortcuts. . . . . . . . . . . . . . . . . 4
Multimedia Messages . . . . . . . . . . . . . . . 38
Sending multimedia messages . . . . . . . . . . . . . 38
Receiving multimedia messages . . . . . . . . . . . . 39
Viewing multimedia messages. . . . . . . . . . . . . . 40
2
Making and Answering Calls . . . . . . . . . . 9
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the speakerphone . . . . . . . . . . . . . . . . . . 10
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 13
Silencing an incoming call . . . . . . . . . . . . . . . . 13
Calling emergency services . . . . . . . . . . . . . . . . 13
Understanding roaming. . . . . . . . . . . . . . . . . . . 14
Customizing Your Phone . . . . . . . . . . . . 41
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 42
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . 42
Setting sounds for your phone . . . . . . . . . . . . . 43
Setting message alerts. . . . . . . . . . . . . . . . . . . . 44
Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 44
Personalizing the screen. . . . . . . . . . . . . . . . . . 45
Creating a secure environment . . . . . . . . . . . . . 47
Network settings . . . . . . . . . . . . . . . . . . . . . . . . 48
Data Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Setting position location . . . . . . . . . . . . . . . . . . 50
3
4
Storing Contacts . . . . . . . . . . . . . . . . . . . 16
Creating a new contact . . . . . . . . . . . . . . . . . . . 16
Editing or erasing a contact. . . . . . . . . . . . . . . . 16
Editing a phone number . . . . . . . . . . . . . . . . . . 17
Finding contact information . . . . . . . . . . . . . . . 18
10 Using Voice Recognition . . . . . . . . . . . . 51
Setting up voice dialing. . . . . . . . . . . . . . . . . . . 51
Calling using voice tags. . . . . . . . . . . . . . . . . . . 51
Calling using digit dialing . . . . . . . . . . . . . . . . . 52
Training voice recognition . . . . . . . . . . . . . . . . 53
Using the Camera . . . . . . . . . . . . . . . . . . 19
Setting up the camera for photos . . . . . . . . . . . 19
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 21
Sending a picture . . . . . . . . . . . . . . . . . . . . . . . 22
Camera key map . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting up the video camera . . . . . . . . . . . . . . . 23
Recording a video. . . . . . . . . . . . . . . . . . . . . . . 23
11 Tools & Games. . . . . . . . . . . . . . . . . . . . . 54
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 56
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
5
6
Entering Text, Numbers, and Symbols . 26
Using Media Gallery . . . . . . . . . . . . . . . . 29
Accessing files. . . . . . . . . . . . . . . . . . . . . . . . . . 29
Creating free space . . . . . . . . . . . . . . . . . . . . . . 31
7
Sending and Receiving Text Messages. 32
Sending text messages. . . . . . . . . . . . . . . . . . . . 32
Retrieving text messages . . . . . . . . . . . . . . . . . . 35
Customizing message settings . . . . . . . . . . . . . . 37
12 Connecting to the Internet . . . . . . . . . . . 60
Using the Web Browser. . . . . . . . . . . . . . . . . . . 60
13 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 62
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
vi
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
Opening and closing Koi
Your Kyocera Koi phone has a swivel function that
offers various features when open and closed.
These features are detailed throughout this guide.
Installing the battery
Your phone comes with a removable lithium ion
(LI Ion) battery. Hold the phone with the back
facing you.
To open the
1. Slide the tab at the bottom of the door up.
swivel, face the
phone screen
toward you and
gently slide the
swivel to the right
and up until it
clicks into place.
Remove the battery door.
2. Place the battery in
the phone casing with
the metal contacts
facing the right side
of the phone.
To close the
swivel, push it
down and to the
right until it
clicks into place.
3. Replace the battery
door by sliding the
notches into the
Important: Do not attempt to pull the swivel apart
from the base.
openings near the top
of the phone.
4. Lower the battery
door and slide the tab
at the bottom of the
door up and then
down to secure the
cover into place.
User Guide for the Kyocera Koi Phone
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Common causes of battery drain
Charging the battery
•
•
•
Playing games or using the Web
Keeping backlighting on
Operating in analog ( ) mode. Your phone
switches between modes to find the best signal.
To set your phone to operate in a single mode,
You must have at least a partial charge in the
battery to make or receive calls. Fully charge the
battery before using the phone.
To charge the battery,
connect the AC adapter to the
jack on the bottom of the
phone, then plug the adapter
into a wall outlet.
select Menu
Digital/Analog
→
Settings
→
Network
→
.
•
Operating in digital mode when far away from a
base station or cell site.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
•
•
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
•
•
•
Charging (the icon is animated)
Partially charged
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration or lighted alerts.
Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Caring for the battery
General safety guidelines
•
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
If you have not used the battery for more than a
month, recharge it before using your phone.
Avoid exposing the battery to extreme
temperatures, direct sunlight, or high humidity.
Never dispose of any battery in or near a fire – it
could explode.
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your phone
Home screen.
1
18
19
OK key selects a menu item or option.
2
Jack for hands-free headset (sold separately).
Left softkey accesses menus and functions.
3
20
21
22
4
Speakerphone key activates the speakerphone.
Send/Talk key starts or answers calls.
5
1
2
6
Keypad for entering enter numbers, letters, or symbols.
* Shift key changes the text mode in text entry.
Jacks for AC adapter (included) and data cable (sold separately).*
Camera key to take pictures and record videos.
Navigation key positions cursor during text entry. Scrolls through list.
Right softkey to access Contacts and other menu options.
Video key to initialize video mode while swivel is open.
End/Power key turns the phone on and off. Ends a call.
Back key erases characters in text entry. Returns to previous screen.
# Space key enters a space during text entry. Activates Silent mode.
0 Next key cycles through word choices during text entry.
Antenna extends for making and answering calls.
Lens cover for camera flash and lens.
7
8
10
9
10
11
12
13
14
15
16
17
18
19
20
21
22
3
4
5
6
11
12
13
14
15
7
16
17
8
9
Jog shuttle selects menus and operates camera while swivel is closed.
Camera lens
*Warning: Inserting an accessory into the
incorrect jack will damage the phone.
Camera flash
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Accessing keypad shortcuts
Using Menus
Swivel closed
Jog shuttle shortcuts (swivel closed)
The following menu items are available with the
swivel closed by pressing the jog shuttle in once.
Press down to move between menu items.
From the home screen, pressing the jog shuttle
activates two shortcuts:
•
•
Press and hold down to access the recent
calls list.
•
Silent Mode: Silences the phone. Press in
twice to activate. The silent mode icon appears
at the top of the menu screen.
Press and hold in to activate voice dialing.
Navigation key
(swivel open)
From the home screen press the navigation key in
one of four directions to access three shortcuts and
one custom menu (see page 44 for instructions on
setting up your custom menu).
shortcuts
•
Keyguard: Locks the jog shuttle. The jog shuttle
is temporarily disabled when you open the swivel.
It is enabled when swivel is again closed. Press
and hold up to lock and unlock keyguard.
•
•
Voice Dialing: Initiates the voice dialing
prompt by pressing and holding in.
Call History: Accesses the last 60 calls from all
categories: missed, outgoing, incoming. To
return a recent call, highlight the number, and
press in.
•
•
Contacts: Accesses your contacts list. Highlight
the contact and press in to call.
Camera: Allows you to choose whether to take a
picture, record a video, or view camera
pictures or your video album.
•
•
Scheduler: Launches the month view of the
scheduler menu.
Media Gallery: View or listen to media.
Tip: To return to the home screen from any of
these menus, press the camera key
.
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Swivel open
The following menu items are available to you with the swivel open:
Call History
All Calls
Messages
New Text Msg
Settings
Silent Mode
Tools & Games
Web Browser
Connects to Internet
Tetris
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Call History Timer
All Calls Timer
New Picture Msg
Voicemail
InBox
Browser Alerts*
OutBox*
Saved
Sounds
Display
Convenience
Voice Features
Messaging
Security
Race 21TM
DoodlerTM
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Phone Info
Phone number,
software, ESN, icons
Drafts
Network
Accessories
Contacts
View All
Add New
Find Name
Msg Settings
Group Lists*
Erase Messages
Stopwatch
Add Voice Dial
Speed Dial List
Voice Dial List
Business List
Personal List
Information
Camera
Launches the camera
Media Gallery
Camera Pictures
Images
Sounds
Videos
*Not available on all phones, check with your service provider.
In this guide, an arrow → tells you to select an
option from a menu. For example, Menu
Settings means select Menu, then select the
Accessing menu items (swivel open)
To access menu items from the home screen:
→
•
•
•
Press
Press
Press
to select Menu
.
Settings option.
to select Contacts
.
* To change the way the menus appear, select
left, right, up, or down to view menus
Menu
then select Wheel
→
Settings
→
Display
Graphic, or List and press
→
Main Menu View,
and options.*
,
.
•
•
•
Press
Press
Press
to select a menu item.
See “Choosing a menu view” on page 45 for details.
to back up a menu level.
to return to the home screen.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Performing basic functions
Swivel closed
Note: The phone must be powered ON to perform the following functions.
To...
From the home screen...
Make a call
Press and hold in to initiate voice dialing. Contact must have voice
tag assigned (see page 51).
End a call
Press in.
Adjust volume during call
Acknowledge an alert
Access menus
Press up or down.
Press in when you see OK
Press in once.
.
Scroll menus
Press up and down.
Select menus
Highlight a menu or option and press in once.
Press and hold down.
Access Call History List
Set Silent Mode
Set Keyguard
Press in twice.
Press and hold up. To unlock, press and hold up again.
Take a picture
Open the camera lens cover. Press camera ke
y
.
Record a video
Open camera lens cover. Press in. Scroll down using and
select Video Mode. Press once. Recording continues until you
press again.
6
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Swivel open
To...
From the home screen...
Turn the phone on
Press
and wait until the phone beeps.
Turn the phone off
Make a call
Press and hold
until the phone beeps.
Enter the number, and press
.
End a call
Press
Press
.
Answer a call
.
Access voicemail
Verify your phone number
Press and hold
and follow the system prompts.
Select Menu
Press
→
Phone Info.
Silence the ringer on an
incoming call
, then
to answer.
Activate voice dialing
Launch the browser
Record a voice memo
Access recent calls list
Take a picture
Press
once and follow the prompts (see page 51).
Press and hold
Press and hold
left.
right.
Press
Open camera lens cover. Press camera ke
Open camera lens cover. Select Options. Scroll left or right on the
down.
y
.
Record a video
horizontal menu bar using to select the Video Mode option. Focus
on the image and select Record. When finished recording, select Stop
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
7
The battery is fully charged. The more
black bars, the greater the charge.
Understanding screen icons
These icons may appear on your phone’s screen.
The alarm clock is set.
The phone is operating in IS2000 (1X)
digital mode.
The phone is operating in IS95
digital mode.
The phone is operating in Analog
(FM) mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
The phone is in privacy mode or is
accessing a secure Web site.
High-speed (3G) data service is available
and active on your phone. Check with
your service provider for availability.
(blinking) The phone is sending high-
speed data.
(blinking) The phone is receiving high-
speed data.
High-speed data service is available, but
the phone is dormant.
A call is in progress.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its home
service area.
The phone is at the home screen. To
access Menu, press
The phone is at the home screen. To
access Contacts, press
.
You have a text message.
.
(
indicates the message is urgent.)
The phone is set to light up instead
of ring.
The phone is set to vibrate or to vibrate
and then ring.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
You have a voice message.
You have a voice/text message.
The phone is in camera mode.
Camera flash mode is ready.
Camera timer mode is ready.
Camera zoom mode is ready.
The phone is in video mode.
8
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MAKING AND ANSWERING CALLS
Making a call
Ending a call
Swivel open
Make sure you are in an area where a signal can be
received. Look for
on the home screen. The
•
Press
or close swivel (if “End with
more bars you see in this symbol, the stronger the
signal. If there are no bars, move to where the
signal strength is better.
Swivel” is enabled. See page 10).
Swivel closed
Press in once.
When the phone has been idle for a time, it changes
to power save mode. When you see “Power Save”
on your phone’s screen, press any key to return to
normal operating mode.
•
Redialing a number
Swivel open
Swivel open
1. Open the swivel.
•
To redial a recent call, press
access your recent calls. Highlight a phone
number, and press
Tip: To redial the last number called, received,
or missed, press three times. If you see a
twice to
2. Enter the phone number.
.
3. Press
.
Swivel closed
message prompting you to speak a name, press
two more times.
You can only use the voice dialing feature when
calling with the swivel closed. Voice dialing
requires that a contact be saved with a voice tag.
See page 51.
Swivel closed
•
Press and hold down to launch the call
1. Press and hold in to initiate voice dialing.
history list. Highlight a caller and press in.
2. Say the name of the contact when prompted.
The phone places the call.
User Guide for the Kyocera Koi Phone
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Ignore Call to immediately send the caller to
voicemail. Missed Call appears on your screen
until the caller leaves a message.
Calling a saved number
If you have already saved a phone number, you can
use the Contacts list to find it quickly.
Note: In the absence of voicemail, this feature
drops the call.
1. Press
or to select Contacts.
2. Scroll down the list to find the contact you want
to call.
Answering calls using the swivel
You can set the phone to answer immediately when
you open the swivel. This feature does not apply to
incoming data/fax calls.
3. Highlight the name and press
or in to
dial the number.
Answering calls
1. Select Menu
→
Settings
→
Convenience
→
When a call comes in, the phone rings, vibrates,
or lights up, and a dancing phone icon appears.
The phone number of the caller also appears if it is
not restricted. If the number is stored in your
Contacts directory, the contact name appears.
Swivel Answer.
2. Select Enabled to set the phone to answer when
you open the swivel.
Select Disabled to have the phone continue
ringing when you open the swivel.
Swivel open
•
Press
to answer the incoming call
Using the speakerphone
Your Kyocera Koi phone has a built-in
speakerphone that you can use during a call when
the swivel is open.
-or-
•
Press
to answer the incoming call and turn
on the speakerphone.
Turn on the speakerphone
Swivel closed
Press in to select Answer Call
Press
to turn on the speakerphone at any time
•
.
while the swivel is open.
To silence or ignore the call
When an incoming call is received, you can choose to:
•
•
During an incoming call alert, press
to answer the call and turn on the
speakerphone simultaneously
•
Silence Ringer to stop the ringing. Ringer
Silenced icon appears on your phone. You can
still answer the call or let the call go to voicemail.
Once the speakerphone is turned on,
“
Speaker is ON” displays on the screen.
10
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn off the speakerphone
Viewing recent call details
•
Press
to turn off the speakerphone.
Details on the last 60 calls you made, received, or
missed are stored in the Call History list and are
identified by the following icons:
The message “
the screen.
Speaker is OFF” displays on
Outgoing call
Incoming call
Dealing with missed calls
When you have missed a call, “Missed Call” appears
on your screen unless the caller leaves a voicemail.
Missed call (flashing)
Viewing recent calls
Swivel open
1. Select Menu
→
Call History
.
•
•
•
To clear the screen, press in or
select OK
to
.
2. Select a list: All Calls
,
Incoming Calls Outgoing
,
Calls, or Missed Calls
.
To view details of the call, press
highlight Missed Calls, then press
down to
twice
3. Select a recent call item.
4. Press to select Options
To return the call, highlight Missed Calls, then
press
.
.
–
Save adds the phone number to the
Contacts list.
Swivel closed
–
Add to adds the phone number to a
•
To clear the screen, press in to select OK.
saved contact.
•
To return the call, press down to highlight
–
–
Send Msg sends a text message to the contact.
Missed Calls and then press in twice.
Send Picture Msg sends a picture message
to the contact.
Setting missed call alerts
You can set an alert to beep every five minutes after
you have missed a call.
–
Prepend adds an area code to the number if
you plan to save the number as a contact.
•
S
elec
M
t
enu
→
Settings
→
Sounds
.
→
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock code,
see “Changing your lock code” on page 47.
To classify a phone number as secret, see “Creating
a new contact” on page 16.
Missed Call Alert
→
Enabled
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Calling recent calls
Swivel open
Using speed dialing
To call a contact that has a speed dial location:
•
From the home screen, enter the one- or two-
digit speed dialing location and press
1. Press
2. Highlight the number you want to call.
3. Press
down.
.
.
1-Touch dialing
1-Touch dialing is the fastest way to speed dial a
contact that has a speed dial location.
Swivel closed
1. Press and hold down.
2. Highlight the number you want to call.
3. Press in.
Note: You must (1) enable 1-Touch dialing on your
phone and (2) have a speed dial location assigned
to a contact. See “1-Touch dialing” on this page.
Erasing recent calls
Enabling 1-Touch dialing
1. Select Menu
2. Select an option: All Calls, Incoming Calls
Outgoing Calls, or Missed Calls
→
Call History
→
Erase Call Lists.
1. Select Menu
→
Settings
→
Convenience
→
,
1-Touch Dialing
→
Enabled.
.
2. Press
Using 1-Touch dialing
To call a contact that has a speed dial location:
.
3. Press
to select Yes.
Speed dialing
Speed dialing allows you to quickly dial a stored
phone number by entering a one- or two-digit speed
dialing location number and pressing
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
.
Note: Before you can use speed dialing, you must
save a phone number as a contact and assign a
speed dial location to it. Refer to “Creating a new
contact” on page 16 to create a new contact, or
“Editing or erasing a contact” on page 16 to add
speed dial to an existing contact.
speed dialing location is 15, press
then press and hold
briefly,
.
12
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
If you see only the
Swivel open
1. Press and hold
symbol
Setting up voicemail
Before your phone can receive voicemail messages,
you must set up a password and record a personal
greeting with your service provider. When you have
set up your voicemail, all unanswered calls to your
phone are automatically transferred to voicemail,
even if your phone is in use or turned off.
to initiate a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
•
You can set the phone to beep or vibrate every five
minutes to remind you that you have voicemail.
See “Setting message alerts” on page 44.
1. From the home screen, press and hold
2. Press at the message.
.
Swivel closed
3. Follow the system prompts to create a password
•
Press in to call voicemail.
and record a greeting.
•
Press down to ignore.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Silencing an incoming call
To silence an incoming call quickly, press
. Then press to answer the call.
•
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
This action silences the current call only. The next
call will ring as normal.
Adjusting the volume during a call
If you see “New Messages”
Swivel open or closed
•
To adjust the earpiece volume during a call,
press up or down.
1. Press
or to select Call, which initiates a
Calling emergency services
call to your voicemail number.
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates as
described below.
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
•
Press
or to select Ignore.
•
Dial your 3-digit emergency code and
press
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
13
You can call the code even if your phone is locked or
your account is restricted. When you call, your phone
enters Emergency mode. This enables the emergency
service exclusive access to your phone to call you
back, if necessary. To make or receive regular calls
after dialing the code, you must exit this mode.
Timing your calls
You can set your phone to beep 10 seconds before
each minute passes when you are on a call.
•
Select Menu
→
→
Settings
Enabled
→
Sounds
→
Minute Alert
.
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 49.
To exit Emergency mode
When you have completed the emergency call:
1. Press
to select Exit
.
2. Press
again to confirm your choice.
Note: To determine who has access to your
location, see “Setting position location” on page 50.
Understanding roaming
Controlling network roaming
Tracking calls
Depending on services available from your service
provider, you may set the phone to either digital or
analog mode. This is useful if you are in an area that
borders on digital service and the automatic feature is
causing the phone to keep switching between modes.
You can track the number and duration of calls
made and received on your phone.
1. Select Menu
→
Call History.
2. Select a timer:
1. Select Menu
→
Settings
→
Network
→
–
Call History Timer—Tracks all calls you
have made and received since you last reset
this timer. To reset this timer to zero, press
Digital/Analog
.
2. Select an option and press
.
–
–
–
–
Automatic automatically switches the phone
between digital and analog.
to select Reset
.
–
–
All Calls Timer—Tracks all calls you have
made and received. This timer cannot be reset.
Analog only sets the phone to work in
analog mode only.
Kilobyte Counter—Tracks the kilobytes of
data sent and received by the phone. This
counter resets automatically. May not
appear on all phones.
Analog call forces a call into analog mode
for the duration of the next call.
Digital only sets the phone to work in digital
mode only.
14
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting an alert for roaming
Setting Call Guard
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
You can set the phone to warn you before you
answer or place a call while roaming.
•
Select Menu
→
Settings
Call prompt.
→
Convenience
→
1. Select Menu
→
Settings
.
→
Network
→
Call Guard
→
Roam/Svc Alert
–
The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
2. Select an option and press
.
–
–
–
When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
–
To accept or place a call while roaming, you
must press
.
Note: This functionality is disabled when the phone
is in emergency mode.
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
1. Select Menu
→
Settings
→
Sounds
→
Roam Ringer
.
2. Highlight Enabled to hear the ringer.
3. Press to set.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
15
3
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Your phone
can hold, on average, about 500 phone numbers.
–
–
Time Pause stops dialing for two seconds,
then continues to dial.
Hard Pause stops dialing until you
select Release
.
Creating a new contact
1. From the home screen, enter the phone number
7. Select Save when done.
Adding a code or extension
you want to save, including the area code.
When you save the phone number of an automated
service, you may include a pause where your phone
would stop dialing; for example, where you would
wait to dial an extension.
Note: To save a contact without entering a
phone number, select Menu
Add New, select an option, and skip to step 3.
2. Select Save
→
Contacts
→
.
1. Enter the first portion of the phone number.
3. Enter a name for the contact. If you need to
2. Select Options
.
learn how to enter letters, see page 26.
3. Select a type of pause:
4. Press
down once to move to the
number field.
–
–
A
A
Time Pause
Hard Pause
5. Enter the contact’s information.
6. Select Options to add information to the contact.
4. Enter the remaining numbers.
–
–
–
–
–
Number Type to designate a number as
Work, Home, Mobile, Pager, or Fax.
5. Select Save and follow the prompts.
Editing or erasing a contact
To make changes to a contact, take these steps.
Add Speed Dial to assign a speed dial
number to your phone number.
Add Voice Dial allows you to add a voice tag
to your added phone number.
1. Select Menu
→
Contacts.
2. Select View All or Find Name to find the contact
Secret hides the number from view in the
contacts list and other areas of the phone.
you want to edit.
Primary Number assigns phone number as
primary number for contact.
16
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Highlight the contact to edit and press
.
–
Edit Type—Assign a type: work
,
home,
mobile
,
pager, or fax. The type icon
4. Select Options
.
appears next to the phone number in
the Contacts list.
5. Highlight an option and press
to select it:
Unassign Ringer,
Unassign Picture, Edit Name,
Add To
,
Assign Ringer
,
–
–
Erase Number—Erase the number from
the contact.
Assign Picture
Erase Contact, or Classify Contact
,
.
Erase Voice Dial—Erase the voice dial
name associated with the number.
Editing a phone number
1. Select Menu
→
Contacts
.
–
–
Edit Number—Change the phone number.
2. Select View All or Find Name to find the contact
Edit Voice Dial—Record a new voice
you want to edit.
dial name.
3. Highlight the contact to edit and press
4. Press down to highlight the phone number
you want to edit.
.
–
Secret—Make the number secret so that it
will not appear on the screen until the lock
code is entered. Secret numbers can be
called without a lock code.
(For more information, see “Restricting
calls” on page 48.)
5. Select Options
.
6. Highlight an option for the phone number and
press
:
–
–
Primary Number—Make this number the
first one that shows up when you open
the contact.
–
–
–
–
Send Text Msg—Send a text message to the
phone number you selected.
Send Picture Msg—Send a picture message
to the phone number you selected.
Prepend—Move the cursor to the
beginning of the number so you can add the
area code.
View Number—See the phone number
you selected.
7. Enter the new information and follow
Add Voice Dial—Speak the name of the
contact person for this number so that you
can dial it using voice recognition (VR). For
more information, see page 51.
the prompts.
8. Select Save, if necessary.
–
Add Speed Dial—Assign or remove the
location you use to speed dial the number.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
17
4. Scroll down until you find the name you want,
then press
Finding contact information
.
To find a phone number or contact, you can (1)
check the frequent contacts list, (2) search the
Contacts directory, or (3) use Fast Find.
–
To call the contact, highlight the number
and press
To display contact information, press
.
–
.
Checking the Frequent List
Setting Fast Find
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
Select Contacts to access all of your contacts in an
alphabetical list. the last 15 of your most frequently
called contacts (if you have enabled the Frequent
List setting). You also see the All Contacts list if you
scroll down past the double line.
•
From the home screen,
select Menu
→
Settings
→
Convenience
→
Fast Find
→
Enabled
.
To enable the Frequent List setting
•
S
elec
M
t
enu
→
Settings
→
Convenience
→
Using Fast Find
1. From the home screen, press the keys
Frequent List
→
Enabled
.
corresponding to the letters of the name you
want to find. A matching contact or speed dial
Searching the Contacts directory
1. Select Contacts for a list of all contacts.
entry appears. Press
matching entries.
down to scroll through
To quickly get down the list, enter the first letter
of the contact. The menu skips to that letter of
the alphabet.
-or-
2. Highlight the name you want, then press
to call the number.
2. Select Menu
→
Contacts.
3. Select a search method:
–
–
View All—List all saved contacts.
Find Name—Locate a specific name. Enter
part of the contact name, then select Find
.
–
Speed Dial List, Voice Dial List, Business
List, or Personal List—Select a contact
from a list.
18
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
4
USING THE CAMERA
Tips before operating your
camera
Setting up the camera for photos
1. With the swivel open, select Menu
2. Select Options
→
Camera.
•
You cannot activate the camera while on an active
call or while browsing files in the media gallery.
.
3. Scroll left or right on the horizontal menu bar
using
•
The lens cover must be open before you can
take a picture.
.
4. Select Settings
.
Note: When the phone is powered on and in an
idle state, opening the lens cover causes the
phone to automatically go into camera mode.
5. Scroll down to highlight an option and press
:
–
–
Flash On, Off, or Automatic.
Resolution options are 1280 x 960 (best for
printing), 640 x 480, 352 x 288, 320 x 240
(best for sending to email and viewing),
176 x 144, 160 x 120.
•
•
Once the camera is active, the home screen acts
as the viewfinder.
If you get a “Low memory” error on your
phone’s screen, check your resolution and
quality compression settings. See “Setting up
the camera” on this page.
–
–
Low Light Mode brightens the picture for
low light environments.
Self Timer options are Off (default) or 3, 5,
or 10 second pauses. When set, the camera
beeps tones from 3 seconds down to the
time the shutter snaps the picture
•
•
If there is no activity within approximately
45 seconds after you turn your camera on, then
the camera quits and returns to the previous
launch point.
automatically. Self Timer is not available
when Multishot mode is activated.
Menu settings and options can only be accessed
when the camera is active.
–
–
Multishot options are On or Off (default).
When set to On, the camera allows you to
take multiple pictures (up to six) while the
camera key is pressed and held. A tone will
play each time a picture is taken. A second
tone will play when the final picture is taken.
Shutter Sound sets the sound used when the
shutter closes while taking a picture.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
19
–
–
White Balance allows the camera to adjust
to whites. Useful feature for optimizing
picture taking in different light situations.
Options are Automatic, Fluorescent,
Incandescent, or Daylight.
Menu options for camera mode
1. Select Menu
→
Camera.
2. Select Options
.
3. Scroll left or right on the horizontal menu bar
using to scroll through the options:
Quality sets the picture compression. The
higher the compression, the better the detail
of the picture (higher pixel rate). Options
are Low, Medium, or High (default). When
set to High, the picture file size is larger,
using more memory.
•
•
Last shows the most recent picture taken.
Video Mode toggles between video and
camera modes.
•
•
•
•
Camera Pictures displays all pictures taken
and stored.
–
LED flashes a light to indicate a picture has
been taken. Options are On (default) and Off.
Settings displays available camera settings you
may set up prior to taking a picture.
Cancel is available only when the swivel is
closed and dismisses menu options.
Restoring camera menu settings
The following settings revert to the default setting
each time you enter and exit the camera application:
Quit is available only when the swivel is
closed and dismisses returns to previous
screen display.
Zoom, Brightness, Contrast, Camera, MultiShot,
Color tone, Frames, Self Timer, and Picture Layout.
•
•
•
Brightness allows you to adjust the brightness
of the image in the home screen LCD.
The following settings remain at the setting
you selected each time you enter and exit the
camera application:
Contrast allows you to adjust the contrast of the
image in the home screen LCD.
White Balance, Flash, Resolution, Quality, Shutter
Sound, and LED.
Frames allows you to add a frame or a stamp to
your picture. A frame or stamp cannot be
removed once it has been used in a picture.
Note: The picture resolution changes to 176 x
144 while taking pictures with frames. The
resolution returns to original setting once
frames is disabled.
20
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Focus on the image using the phone’s display as
Camera mode indicators and icons
The camera mode displays the following onscreen
indicators and icons:
a viewfinder.
Tip: Press
or up or down to zoom in or
zoom out.
Icon
Description
3. Take the picture using one of three methods:
Flash on
–
–
–
Press in
Press
Camera mode
Video mode
Press
.
The image is immediately saved to
Top right hand
Number of snapshots
Media Gallery
.
corner numbers. remaining
4. Press
to return to the viewfinder and take
more pictures.
Zoom level
5. Press
when finished taking pictures.
Bottom left hand
numbers
Resolution setting
Tip: Closing the shutter cover on the back of
the phone will exit the camera mode.
Multishot
Swivel closed
1. Press in and scroll to Camera
Self Timer (when camera/
capture key is pressed, the
icon switches to a number
and begins counting down)
.
Tip: Slide the shutter cover on the back of the
phone open. This automatically turns the
camera on if the phone is already powered on
and in an idle state.
Taking a picture
Swivel open
2. Press in again.
–
A vertical row of options appears on the left
of the screen: Quit, Brightness, Contrast,
Frames, Last, Video Mode, Camera Pictures,
Settings, and Cancel.
1. Select Menu
→
Camera.
Tip: Slide the shutter cover on the back of the
phone open. This automatically turns the
camera on if the phone is already powered on
and in an idle state.
3. Focus on the subject you want to capture, using
to zoom in or out.
User Guide for the Kyocera Koi Phone
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Swivel open
Key
4. Press . The picture is taken and saved.
5. Press to return to options.
Camera
Menu Screen
In
Take picture
Dismiss menu
options
6. Select Quit when finished taking pictures.
Select Capture to Select OK.
take picture
Sending a picture
If your service provider supports picture messaging
you can send pictures through text messaging.
Select Options
Cancel,
dismisses menu
Note: Swivel must be open to send pictures.
Up
Zoom in
Scroll menu
options right
1. Take the picture.
2. Select Send. This launches the multimedia
Down
Zoom out
Scrolls menu
options left
messaging application.
3. Write your message. See “Creating a text
Takes picture
Takes picture
Zoom in
Select menu
option
message” on page 32.
In
Select menu
option
Camera key map
Swivel closed
Up
Scrolls menu
options right
Key
Camera
Menu Screen
Down
Zoom out
Scrolls menu
options left
In
In
Take picture
Dismiss menu options
Display menu
Select menu options
Scroll menus left
Down Zoom out
Up Zoom in
Scroll menus right
22
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the video camera
Menu options for video mode
Menu settings can only be accessed when the
camera is in an active mode.
1. With the swivel open, select Menu
2. Press to select Options
3. Scroll left or right on the horizontal menu bar
using . Highlight and select Video Mode
4. Select Options
→
Camera.
.
1. Select Menu
2. Press to select Options
3. Scroll left or right on the horizontal menu bar
using
4. Highlight Video Mode, and press
5. Select Options
→
Camera.
.
.
.
.
5. Scroll left or right on the horizontal menu bar
using to choose an option:
.
.
–
–
Last plays the most recent video taken.
6. Scroll left or right on the horizontal menu bar
using
Camera Mode toggles between video and
.
camera modes.
7. Highlight Settings and press
.
–
–
Video Album displays all videos taken
and stored.
8. Highlight an option and press
:
Settings allows you to change your camera
settings. See “Setting up the camera for
photos” on page 19.
–
White Balance allows the camera to adjust
to whites. Options are Automatic,
Fluorescent, Incandescent, or Daylight.
–
–
Cancel is available only when the swivel is
closed and dismisses menu options.
–
Quality sets the video compression. The
higher the compression, the better the detail
of the video. Options are Low, Medium, or
High (default). When set to High, the video
file size is larger, using more memory.
Brightness allows you to adjust the
brightness of the image in the home
screen LCD.
–
LED lights and stays steady during video
–
Contrast allows you to adjust the contrast of
recording. Options are On (default) and Off.
the image in the home screen LCD.
Recording a video
When you begin recording a tone sounds, the video
record icon blinks, and a “Recording” indicator
with a timer progress bar displays. A tone sounds
when the video stops recording.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Swivel open
Swivel closed
1. Select Menu
→
Camera
.
1. Press in and scroll to Camera.
Tip: Slide the shutter cover on the back of the
phone open. This automatically turns the
camera on if the phone is already powered on
and in an idle state.
Tip: Slide the shutter cover on the back of the
phone open. This automatically turns the
camera on if the phone is already powered on
and in an idle state.
2. Press
3. Scroll left or right on the horizontal menu bar
using to select the Video Mode option.
4. Focus on the image and press
to select Options
.
2. Press in again.
–
A vertical row of options is on the left of the
screen: Quit, Brightness, Contrast, Frames,
Last, Video Mode, Camera Pictures,
Settings, and Cancel.
to
select Record
.
3. Press up or down and highlight
Tip: Press
or zoom out.
or up or down to zoom in
Video Mode
.
4. Press in again.
5. If you want to pause the recording, press
to
select Pause. To continue recording, press
5. Focus on the subject you want to video.
to select Resume
6. When finished recording, press
select Stop
7. The recorded video is immediately saved to
.
6. Press . Recording continues until you press
to
a second time, or when the recording timer ends.
.
7. The recorded video is immediately saved to
Media Gallery
→
Videos
→
Video Album.
Media Gallery
→
Videos
→
Video Album.
8. Press to return to the vertical row of options.
8. Press the Back or End key when finished taking
videos. This will take you back to the main
menu screen.
Select Quit when finished taking videos.
24
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Video key map
Swivel closed
Key
Video Camera
Menu Function
1st press – start recording (plays a tone)
2nd press – stops recording (plays a tone)
Before recording: displays menu
During recording:
Dismiss menu options
In
Select menu option
In
1st press – pause
2nd press – selects option
Zoom out
Scroll menu option left
Scroll menu option right
Down
Up
Zoom in
Swivel open
Key
Video Camera Function
Menu Function
1st press – start recording toggle
Dismisses menu options
In
2nd press – stops recording toggle
“Record” – starts recording toggle
“Stop” – stops recording toggle
“OK” – selects option
“Options” – while not recording
“Cancel” – dismisses menu
Dismisses menu options
“Pause/Resume” – pauses and resumes recording toggle
When not recording, goes back to the last function.
While recording, stops recording.
Exit to idle when not recording
Zoom in
Exit to idle
Up
Down
Up
Scrolls menu options left
Zoom out
Zoom in
Scrolls menu options right
Scrolls menu options right
Scrolls menu options left
Down
Zoom out
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
25
5
ENTERING TEXT, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Entering numbers
•
To enter a number while in
mode, press a
or mode,
number key once.
Understanding text entry screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
•
To enter a number while in
press and hold a number key until the number
appears on the screen.
capitalization setting
Entering words letter by letter
Use normal alpha to enter letters.
text entry mode
1. Press a key once for the first letter, twice for the
second letter, and so on. If your phone is set to
Spanish, French, or Portuguese, accented
letters are available.
text entry
field
2. Wait for the cursor to move right and enter the
next letter.
Text entry modes
There are five text entry modes:
Case change
Entering words quickly
When you press a series of keys using
mode,
checks its dictionary of common words and
guesses at the word you are trying to spell.
Numbers only
Normal alpha
1. For each letter of the word you want, press the
Rapid Entry
key once. For example, to enter the word “any”
Add Symbol
press:
→
→
.
Note: The mode you start in depends on the task
you are doing. For example, when entering a phone
number, you’re in number mode. When entering a
name for a contact, you’re in normal text mode.
2. If the word doesn’t match what you want, press
to look at other word matches.
3. When you see the word you want, press
.
26
Entering Text, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering symbols
Changing modes
While entering text, you can enter symbols by
Sometimes you need to change modes. For
pressing
until you see the symbol you
example, to enter numbers in an email address
want. Using this method, you have access to the
following symbols:
while in
mode, you must change to
mode, enter the numbers, and then change
back to
mode to complete the address.
.
& @ ,
1
‘
:
?
To change text entry modes, you can either:
To access the full set of symbols:
•
Press and hold
you want appears.
until icon for the mode
1. Press
2. Select
3. Press
to select Options.
Add Symbol
.
-or-
down to view the list of symbols.
•
Select Options, then the mode.
4. Press the number key corresponding to the
symbol you want.
Capitalization settings
You can change capitalization at any time while
Switching default text entry modes
You can change the default text entry mode when
creating a text message. This setting applies only to
the message body screen, not the “To” screen.
entering text. Simply press
to choose upper
or lower case while in Normal Alpha mode.
1. Select Menu
→
.
Messages
→
Msg Settings
→
Default Text
2. Select Normal Alpha or Rapid Mode
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 26.
Use mode and press a key once to enter its number.
For more options, see page 26.
Use mode and press
you want. See page 27.
Enter a number
Enter a symbol
until you find the symbol
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Press and hold
.
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Press
Press
right or left.
up or down.
Press and hold
.
In
In
mode, press
mode, press
. Choose
.
Lowercase any letter
. Choose
or
.
Select soft options on the screen
Press the appropriate key,
.
28
Entering Text, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
6
USING MEDIA GALLERY
The media gallery stores all the files in the phone
and displays files.
3. Highlight a picture and select Options. The
following options are available to you:
–
Send allows you to send the picture to
another phone or email address.
Accessing files
1. Select Menu
→
Media Gallery.
–
–
–
Take Picture to snap another photo.
2. Select an option:
Erase the image.
–
Camera Pictures displays your photos taken
in a table/thumbnail view. The photos
display in chronological order with the
newest one first (top left corner). The file
name also displays.
Assign picture as a Caller ID or
as wallpaper.
–
–
–
Rename the photo.
Details of the file.
Erase All a picture by rotating or resizing.
–
Images displays a list of categories that
contain preloaded, downloaded, saved, or
created files such as wallpaper, screen
savers, or caller IDs.
Modifying pictures
You can modify a picture by rotating, resizing, or
changing the brightness, sharpness, saturation,
hue, auto adjust and/or color tone.
–
–
Sounds displays a list of categories that
contain saved or downloaded sounds such
as ringers and voice memos.
1. Select Menu
→
Media Gallery
.
→
Camera Pictures
Videos displays a list view of the file names
2. Press
.
of videos that you recorded.
3. Use
to highlight a picture.
4. Press
or select View.
Browsing pictures
5. Select Options
.
1. Select Menu
→
Media Gallery
→
Camera Pictures
.
6. Select Modify
.
2. Press
to select View, or press
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
29
7. Select Options. The following options are
–
–
–
Screen Savers displays
available screensavers.
available to you:
Caller IDs displays pictures and images
saved and the text IDs you assigned them.
–
–
–
Rotate options are 90 degrees right, 180
degrees, 90 degrees left, Flip horizontal,
or Flip vertical.
Resize will decrease the photo or image
resolution by 90%, 75%, 50%, or 35%.
This will create more memory space.
Doodles displays files created with Doodler.
3. Select Open to display the files in that menu.
4. Select Options. Choose from the
following options:
Brightness, Sharpness, Saturation, and Hue
–
Send launches the messaging application so
you can share the image.
display bar is shown and can be increased by
pressing
left.
right, or decreased by pressing
–
–
Erase the image (image must not be locked).
Assign the image to Caller ID, Wallpaper, or
Screen Saver.
–
–
Auto Adjust allows you to brighten dark
photos or darken bright photos.
–
Send To Online uploads an image to a
server (not available on all phones, check
with your service provider).
Color Tone options are Grayscale, Negative,
Sepia, and Emboss. When chosen, the
camera allows you to modify the color tone
of a photo.
–
–
–
Rename the image.
Details gives you the file size of the image.
8. Select Save when done modifying. From the
Save Changes menu, choose Save (saves your
original file with modifications), or Save as new
(creates a modified file from your original).
Erase All erases all images stored (images
must not be locked).
5. Select Close or press
when done.
Browsing images
Browsing sounds
The images menu allows you to assign your files to
various applications.
1. Select Menu
→
Media Gallery
→
Sounds.
2. Use
to highlight the menu item you want:
1. Select Menu
→
Media Gallery
→
Images.
–
Saved Sounds contains sounds saved on
2. Use
to highlight the menu item you want:
Saved Images displays available images.
Wallpapers displays wallpaper selections.
your phone.
–
–
–
–
Ringers contains ringers saved on your phone.
Voice Memos contains voice memos you
made to yourself.
30
Using Media Gallery
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select Open to display the files in that menu.
–
–
–
Record New allows you to record new videos.
4. Select Options. Choose from the
Erase the videos.
following options:
Send to Online uploads a video to a
server (not available on all phones, check
with your service provider).
–
–
Erase the sounds.
Send To Online uploads a sound to a server
(not available on all phones, check with
your service provider).
–
–
–
Rename allows you to rename the video file.
Details gives you the file size of the video.
Erase All erases all videos stored.
–
–
–
Set As Default sets the sound as default.
Details gives you the file size of the sound.
Erase All erases all sounds stored.
6. Select Close when done.
Creating free space
5. Select Close when done.
If your phone does not have enough memory to
store a file, a dialog displays and asks you if you
want to create space.
Browsing videos
1. Select Menu
→
Media Gallery
→
Videos.
•
Select Yes to display the file browser
(categories) with the memory needed and
available memory.
2. Use
to highlight the menu item you want:
–
Video Album contains videos taken with
your camera.
•
Select No to return to the previous screen and
–
Saved Videos contains videos that
no files are saved or downloaded.
were downloaded.
The actions are limited to the following:
3. Select Open to display the files in that menu.
–
Erase the selected file
4. Select Play to review a video on the camera’s
(you cannot erase locked files).
screen. Use
to highlight Play
, Stop
.
–
Done re-attempts the download or save.
, Rotate Left , or Rotate Right
–or–
5. Select Options. Choose from the
following options:
–
Send launches the messaging application so
you can share the videos.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
31
7
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone.
3. To add another recipient to this message,
choose a method:
– Press
to select Options. Then select
,
Important: The features and menus described in
this chapter may vary depending on services
available in your area. In addition, usage charges
may apply to each message. For details, check with
your service provider.
Recent List Contacts List, or Group Lists.
– Enter a space or comma after the first number.
Then enter another recipient manually.
Note: You can send a message to up to 10
contacts at once. The messages will be sent one
at a time, once to each addressee.
Sending text messages
You can only send text messages to phones that are
capable of receiving them, or to email addresses.
4. Select Next.
5. Enter the message.
Text messages have a predetermined character
limit. When you reach the character limit for a
single message the phone beeps and asks you to
edit the message to meet the size limitation. Note
that signatures you create and assign count as
characters in your messages.
6. Select Options
→
Insert. Press
to add
prewritten text:
–
Insert QuickText—Select a prewritten
message. Highlight one from the list and
press
.
7. When you have completed the message, you can
Creating a text message
send it immediately or set sending options. To
send it immediately, press
to select Send. See
To send a text message to a single recipient:
the following procedure to set sending options.
1. Select Menu
→
Messages
→
New Text Msg.
2. Select an address to enter the recipient’s phone
Setting sending options
When you are ready to send a message, you have
several options for how and when you want the
message to be received.
number or email address:
– Select a saved number from the Recent List
or Contacts List, or select a Group Lists you
have created.
1. Once you have completed the message, press
– Enter a New Address manually.
(To learn how to enter text, see page 26.)
to select Options
.
2. Scroll down to select:
32
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Add Address—Return to the “To” screen to
add another recipient without losing the
message text. Enter the new address, then
select Next to return to message entry screen.
Adding a signature
The signature you create does not display in the
message creation screen; however, the signature is
included at the end of all outgoing messages and is
counted as characters in your messages. To create
a signature:
Save Message—Save the message in
your Drafts folder. This prevents the message
from being deleted if you have activated
AutoErase, and enables you to send the
message to others.
1. Select Menu
→
Settings
→
Messaging
→
Signature
.
2. Enter your signature in the text field.
–
–
Save Quick Text—Save the message you have
just entered as a prewritten message, then
return to the message entry screen so you
can send the message.
3. Select OK to save the setting.
If you cannot send messages
You may not be able to send or receive messages if
your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 36.
Settings — Highlight Settings. Press
.
Choose from the following:
•
•
•
Msg Receipt—Request notification when
the message has been received.
Set Priority—Label the message
as “Urgent.”
Understanding appended messages
Callback Number—Include a callback
number with the message to let the
recipient know at what number they can
call you back. Select Yes to include your
own number, or Edit to enter a different
callback number.
text entry field
characters remaining
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
•
Send Later—Schedule when to send
the message.
3. When you have finished setting options, press
Important: You will be charged for each
message segment.
to return to the message window.
4. Press
to select Send.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
33
When you start a message, the maximum character
limit (“169” in the example) appears below the
text entry screen. This number counts down as you
enter characters, until it reaches 0. If you continue
to enter text after this counter reaches 0, a message
segment may be appended.
To view the OutBox
1. Select Menu Messages
2. Press
→
→
OutBox.
up or down through the list of
messages. One of the following symbols
appears next to each message:
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
Receiving incoming calls while
creating messages
•
If you don’t wish to answer the call, select Ignore
To answer the call, press . Your message
is saved to the Saved folder. To return to the
message, select Menu
and select Resume
.
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
•
→
Messages
→
Drafts
The message cannot be sent because
service is not available.
.
Viewing the OutBox
You can check the status of messages you have sent
as long as they have been saved to the OutBox.
The scheduled message has been sent
and will be delivered as scheduled. You
cannot cancel delivery of the message.
The message has been received by the
recipient you specified.
To set the Outbox
The Outbox default is set to disabled to conserve
memory. If you want to save your sent messages:
The message has been received and
opened by the recipient you specified.
(This symbol may not be available.
Check with your service provider.)
1. Select Menu
→
Messages
→
Msg Settings
→
Save to Outbox
.
– S electEnabled to save all sent messages to
the Outbox.
The message has been sent to more
than one recipient.
– S electPrompt to alert you to choose whether
or not to save your message.
The message has never been sent, or has
not been sent since it was last modified.
You can cancel delivery of the message.
34
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Retrieving text messages
If you see the
symbol
When a text message is received, your screen
displays “New Messages”, along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
If the
symbol is flashing, the message is urgent.
1. Select Menu
→
Messages
→
InBox.
A list of all your received messages appears.
New, unread messages appear in bold
.
If your phone is set to Automatic Mode, the body
of the message will appear on the phone
screen automatically.
indicates an “Urgent” message.
2. Press
of messages.
3. Press
up or down to scroll through the list
To activate Direct View,
select Menu
Automatic Mode Enabled
→
Messages
→
→
Msg Settings
→
in to read a message.
.
Reading the message
The options available to you may vary. Check with
your service provider.
If you see the “New Messages” note
You can choose to:
•
•
View the message
—
Press
Press
.
Note: Sounds embedded in text messages will not
play if the phone is set to Silent mode.
Ignore the message
—
.
If you see the body of the message
The body of an incoming message will appear on your
home screen only if your phone is set to Direct View.
1. If the text message is long, press
down to
view the entire message.
2. When you are finished, you can Reply to the
sender, Play the sound embedded in the
message, Erase the message, Save the message
to your Saved folder, or set additional Options
for the message:
You can choose to:
•
•
Ignore the message
—
Press
.
Read the message. See “Reading the message”.
Note: If you receive a new message while you are
reading a message, the one you are reading will be
replaced by the new one. You can find the older
message in the InBox:
– View Sender information.
–
–
Forward the message.
Reply with Copy to reply to the message with
Select Menu
→
Messages
→
InBox.
a copy of the original attached.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
35
–
–
–
Save Object(s), such as sound or pictures,
from the message. (This option is available if
the incoming message includes a graphic
or sound.)
Erasing single messages
1. Select Menu
2. Press
want to erase: InBox
3. Press
4. Highlight the message to erase and press
→
Messages.
down to the type of text message you
,
OutBox, or Saved.
Save Contact to save the sender’s phone
number or email address in your Contacts
list. (This option is available if a vCard is
included in the message.)
.
.
5. Select Erase to erase the message. A notification
appears: “Erase this message?”
Save as AutoText to save the text from the
message as AutoText, which you can insert
into other messages. Graphics and sound will
not be saved as part of AutoText.(For more
about AutoText, see page 37.)
6. Select Yes to erase the message.
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of
the message.
3. Select Done
.
Erasing all messages
Note: The
symbol indicates that a graphic did
1. Select Menu
→
Messages
→
Erase Messages.
not come through. It may be too large or
incorrectly formatted.
2. Select a folder to erase all messages from:
InBox OutBox, Saved Folder, or Drafts
Folder. To erase messages from all folders,
,
Setting message alerts
select All Messages
.
You can set your phone to alert you of incoming
text messages or pages. For more information, see
“Setting message alerts” on page 44.
3. A message appears: “Erase all messages?”
Select Yes to erase messages or No to cancel.
Erasing messages automatically
Use this setting to have old messages automatically
erased from the InBox when memory is low.
Erasing messages
It is a good idea to erase old messages, as messages
take up memory in your phone.
1. Select Menu
→
Messages
→
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox, or
erasing them all at once.
Msg Settings
→
Auto-Erase.
36
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Highlight Old InBox Msgs and press . Older
messages will now be erased as new messages
are received.
5. To enter the next address, enter a space or
comma after the first number or email address.
(If you insert a saved contact or a number
from the Recent List, the phone will insert the
comma automatically.)
•
To disable this setting:
Select Menu
→
Messages
Disabled.
→
Msg Settings
→
Auto-Erase
→
6. Select Options to select the next number.
7. Select Recent List or Contacts
.
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
8. When finished, select Done
.
9. To send a message to your new group, see
“Sending text messages” on page 32.
Creating group lists
You can create and save a list of multiple recipients.
Your Koi phone stores five group lists with up to 10
recipients per list.
Creating and editing prewritten
messages (QuickText)
Your phone comes with prewritten (QuickText)
messages, such as “Please call me,” which you can
insert into the body of a text message. You can edit
these messages and create new ones. Your phone
will store up to 40 QuickText messages, with up to
100 characters per message.
1. Select Menu
→
Messages
→
Group Lists
→
Create New
.
2. Enter a name for the list. For help entering text,
see page 26.
3. Press
to select Next.
1. Select Menu
→
Messages
→
Msg Settings
→
Edit QuickText
.
4. To enter the first phone number or email
address, select an option:
2. To create a new pre-written message, press
to select New Msg
.
–
–
–
Recent List to select numbers from your
Recent List.
-or-
New Address to enter the phone number or
email address manually.
To edit an existing pre-written message,
highlight the message and press
.
Contacts List to select numbers from your
phone book.
3. Enter or edit the text and press
to select
Done. For help entering text, see page 26.
Note: You can also save an incoming message
as AutoText. For directions, see page 36.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
37
8
SENDING AND RECEIVING MULTIMEDIA MESSAGES
4. Press
Subject: field. Choose a method:
– Enter the subject text manually, or
down once to enter a message in the
Sending multimedia messages
You can only send multimedia messages to
phones that are capable of receiving them, or to
email addresses. For details, check with your
service provider.
– Press
5. Press
to select Options.
down once or select Next to enter a
Multimedia messages have a predetermined
character and file size limit. When you reach the
character and file size limit for a single multimedia
message, you must edit the multimedia message to
meet the size limitation.
text message in the Text: field.
6. To enter a text message in the Text: field.
Choose a method:
7. Press
down once to enter the
Picture/Video: field.
Note: Multimedia message file size limits may
apply. For details, check with your service provider.
Note: You may add only one picture or one
video per multimedia message sent.
8. Press
to select Options. Select an option:
Creating a multimedia message
•
•
•
Take Picture to instantly take a new photo and
attach it to your message.
1. Select Menu
→
Messages
→
New Picture Msg.
2. Enter the recipient’s phone number or email
Record Video to instantly record a new video
and attach it to your message.
address in the To: field.
3. To add additional recipients:
Media Gallery to access all picture and video
– Enter a space or comma after the first phone
number or email address, then enter another
recipient manually, or
files in the phone:
–
Camera Pictures displays your photos taken
in a table/thumbnail view.
– Press
to select Options. Then select
• Highlight a photo to add to the multimedia
Contacts or Group Lists
.
message. Press
to choose Select.
Note: You can send one multimedia message to
a maximum of 10 contacts.
–
Videos displays a list view of the file names of
videos that you recorded.
38
Sending and Receiving Multimedia Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
•Highlight Video Album
to select Open.
•Highlight a recorded video to add to the
.
–
Message Priority allows you to send
your multimedia message with Normal or
Urgent priority.
Press
multimedia message. Press
to
11. Press
to select Send. This will send your
choose Select.
multimedia message.
9. Press
and press
down once to enter the Sound: field
Receiving multimedia messages
to select Options. Choose:
There are two settings for receiving a multimedia
message on your Koi phone: Auto Receive (default)
and Prompt.
Note: You may add only one new or stored
sound per multimedia message sent.
•
•
Record Sound to instantly record a new sound
and attach it to your message.
Auto receive mode
When a multimedia message is received it is
automatically downloaded onto your phone.
Media Gallery to display a list of categories
that contain saved or downloaded sounds and
voice memos.
The alert “New Message(s)” appears along with the
text “Message Received. View now?”
– Highlight Saved Sounds
to select Open.
– Highlight a sound to add to the multimedia
message. Press
.
Press
•
•
To View the multimedia message, press
To view Later, press
.
.
to choose Select.
Note: If a multimedia message is received during a
call, then the phone downloads the message
approximately one minute after the last key is pressed.
10. Before sending your message, press
to
select additional Options. Choose:
–
Preview Message plays your multimedia
message prior to sending.
Prompt mode
When a multimedia message is received, your
screen displays the alert “New Message(s)” along
with the question “Retrieve Now?”
–
Save Message allows you to save your
multimedia message to the Drafts Folder and
send it later.
–
Add Address allows you to add additional
addresses to your multimedia message prior
to sending it.
•
•
To View the multimedia message, press
.
Select Erase to never download the
multimedia message.
•
To view Later, press
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Note: If a multimedia message is received during a
call, then the phone screen displays the alert “New
Message(s)” after the call ends.
–
–
Replay plays the multimedia message again
from the beginning.
Erase Msg allows you to delete the currently
displayed multimedia message.
To activate Prompt mode:
–
–
Done exits the multimedia message.
1. Select Menu
2. Press
3. Highlight Auto Receive Mode and press
4. Press
highlight Disabled. Press
→
Messages
→
Msg Settings.
Call initiates call to sender of
multimedia message.
up or down to scroll through the list.
.
–
Save Picture saves the currently
viewed picture embedded in the
multimedia message.
up or down through the list and
.
–
–
–
Save Video saves the video embedded in the
multimedia message.
Viewing multimedia messages
When you receive a multimedia message, a
Save Sound saves the current sound
embedded in the multimedia message.
appears on your phone’s screen and remains until
all messages are viewed. The message is stored in
the InBox until the full message has been received,
regardless of the auto receive or prompt setting.
Save Address extracts email addresses,
phone numbers, and/or URLs from the
sender info and multimedia message body.
1. Press
the message is long, press
entire multimedia message.
2. Press to select Options. Press
to highlight additional options for the
multimedia message:
to View the multimedia message. If
down to view the
–
–
–
Save as QuickText saves the text in the
multimedia message to the QuickText list.
down
Save Message saves the multimedia message
to the Saved Folder on the phone.
Forward launches the message creation
screen, allowing you to forward the
multimedia message. The original address
will not be shown, nor will the graphic,
sound, and text fields.
Note: The options available to you may vary.
Check with your service provider.
–
Message Info displays multimedia message
information (priority, sender, subject, time
sent and received, and message size).
3. When you are finished viewing the multimedia
message, select Reply or press
.
–
Play Video plays the video in the
multimedia message.
40
Sending and Receiving Multimedia Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
9
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
My Banner
Voice Features
Add Voice Dial
Network
Data/Fax Calls
Vibe then Ring
Lights Only
Normal Sounds
Main Menu View
Color Themes
Wallpaper
Screen Saver
Backlighting
Auto-Hyphen
Language
Time/Date Format
Contrast
Brightness
Delete Voice Dial
Voice Training
Voice Wake-Up
Voice Answer
Expert Mode
Privacy Alert*
Set Phone Line*
Roam/Svc Alert
Roam Option
Digital/Analog
Location
Sounds
Ringer Volume
Ringer Type
Messaging
Alerts
Signature
Edit QuickText
Auto Retrieve
Callback Number
Msg Receipt
Save to OutBox
Auto-Erase
Business Ringer
Personal Ringer
Roam Ringer
Swivel Open
Swivel Close
Pwr On/Off Sound
Key Volume
Accessories
Pwr Backlighting
Headset Ringing
Auto-Answer
Com Port Speed
TTY Device
Convenience
Swivel Answer
Swivel End
Fast Find
Key Length
Missed Call Alert
Smart Sound
Frequent List
Hold Call
Default Text
Voicemail Number
Minute Alert
Earpiece Volume
Spkrphone Volume
1-Touch Dialing
Web Prompt
Call Guard
Security
Lock Phone
Limit Calls
New Lock Code
Delete Contacts
Emergency Numbers
*Not available on all phones. Check with your service provider.
User Guide for the Kyocera Koi Phone
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning sounds back on
To restore all sounds to the phone:
Silencing all sounds
Your phone is set to make sounds when you receive
calls, press keys, navigate through menus, and
receive alerts (such as new messages).
•
•
With swivel closed, press in once.
With swivel open, press and hold
.
You can silence all sounds and set the phone to
vibrate or light up when you receive calls and alerts.
Choosing ringers
Your Kyocera Koi phone has 25 ringers you can
choose to use for incoming calls.
Setting the phone to vibrate or light up
1. Select Menu
→
Settings
→
Silent Mode.
1. Select Menu
→
.
Settings
→
Sounds
→
Ringer Type
2. Choose an option and press
:
2. Scroll down the list to hear the different rings.
3. Press to select a ringer from the list.
–
–
Vibrate Only—Causes the phone to vibrate
for the duration of the incoming call or other
alert. appears.
Note: Downloaded ringers are added to the end of
the standard list of 25 ringers.
Vibrate then Ring—Causes the phone to
vibrate for the first 10 seconds and then ring
for the remainder of the incoming call alert.
appears.
Assigning business and
personal ringers
You can assign ringers to contacts classified as
business or personal in your Contacts directory.
–
–
Lights Only—Causes the phone to light up
for the duration of the incoming call or other
alert. appears.
Normal Sounds—Causes the phone to ring
for the incoming call or alert (in effect,
returns phone to a non-silent mode).
Note: To classify a contact as Business or Personal,
see page 16.
1. Select Menu
→
Settings
→
Sounds.
2. Ηighlight Business Ringer or Personal Ringer
3. Press
to return to the home screen.
and press
.
Note: The phone will ring when it is attached to an
external power source (such as a charger), even if
all sounds have been silenced.
3. Select a ringer and press
.
Assigning a ringer to a contact
1. Select Menu View All.
→
Contacts
→
Shortcut to Vibrate Only mode
2. Select the contact to assign a ringer to.
•
With swivel closed, press in twice.
3. Select Options
→
Assign Ringer.
•
With swivel open, press and hold
.
4. Highlight the ringer you want and press
.
42
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Importing ringers
You can download additional ringers to your phone
using the Kyocera Phone Desktop software (sold
separately). To purchase this software and other
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringer volume as well as key tones.
Adjusting the earpiece volume
To adjust the earpiece volume manually during a
call, press up or down.
accessories, visit www.kyocera-wireless.com/store
.
Setting sounds for your phone
You can set your phone to sound tones when you
open and close the swivel, and when you turn the
phone on and off. Sounds will not occur during an
incoming call, if you are in a call, or if a headset or
car kit is attached to your phone.
To set the earpiece volume:
1. Select Menu
→
Settings
.
→
Sounds
→
Earpiece Volume
2. Press
decrease the volume.
3. Press to select Save
right to increase the volume, or left to
.
Set sound when swivel opens
1. Select Menu
→
Settings
→
Sounds
→
Adjusting the ringer volume
1. Select Menu
Swivel Open.
→
Settings
→
Sounds
→
2. Scroll through the list to hear the sounds.
3. Select a sound and press to save.
Ringer Volume
.
2. Press
decrease the volume.
3. Press to select Save
right to increase the volume, or left to
Set sound when swivel closes
1. Select Menu
.
→
Settings
→
Sounds
→
Swivel Close.
Adjusting speakerphone volume
1. Select Menu →
2. Scroll through the list to hear the sounds.
3. Select a sound and press to save.
→
Settings
→
Sounds
Spkrphone Volume
.
2. Press
decrease the volume.
3. Press to select Save
right to increase the volume, or left to
Set sound when phone powers on or off
1. Select Menu
→
Settings
→
Sounds
→
.
Pwr On/Off Sound.
2. Select Enabled. To deselect this sound,
select Disabled
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
43
–
–
Vibrate & Remind, Beep & Remind, FWY! &
Adjusting key tone volume
Remind, Game! & Remind, Bloop! & Remind,
Winner! & Remind, Zilofon! & Remind sets the
phone to notify you once when a new
message is received and then notify you again
every five minutes. To stop a reminder alert,
You can change the volume of the tones the phone
makes when you press the keys.
1. Select Menu
→
.
Settings
→
Sounds
→
Key Volume
2. Press
decrease the volume.
3. Press to select Save
right to increase the volume, or left to
press
to select Ignore.
Disabled—Turn off message alerts.
.
Using shortcuts
Setting key length
You can change duration of the tones the phone
makes when you press the keys.
Your Kyocera Koi phone comes with four shortcuts
when in standby mode (swivel open).
1. Select Menu
→
Settings
→
Sounds
→
Press
Press
Press
Press
up
Access your custom menu
Access recent calls
Key Length
2. Choose Normal or Long
3. Press
.
down
left
.
Launch Web browser
Record voice memo
.
right
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
Creating a custom menu
You can create a custom menu that contains your
favorite features. After you set up your menu,
1. Select Menu
→
Alerts
Settings
→
Messaging
→
.
simply press and hold
up to access it.
2. Select the type of alert: Message Alert Page
,
1. Press and hold
up to launch Custom Menu.
Alert, or Voicemail Alert.
2. Press
to select Manage List
.
3. Press
to select an option:
3. Scroll through the available options.
4. Press to select or deselect options. You may
–
Vibrate Once, Beep, Freeway!, Game!, Bloop!,
Winner!, Zilofon! sets the phone to alert you
once when a new message is received.
select more than one feature. Items appear in
alphabetical order in the menu.
5. Highlight Save Changes and press
.
44
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating your custom menu
1. Press and hold
Personalizing the screen
Changing your banner
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
up to launch
Custom Menu
.
2. Press
to select Manage List.
3. Press
to select or deselect options.
4. Highlight Save Changes and press
.
1. Select Menu
→
Settings
→
Display
→
My Banner
.
Creating a shortcut to
frequent contacts
By default, your phone lists your entire contacts list
when you select Contacts. You can also set the
phone to show a list of your most frequent contacts.
2. Press
3. Press
4. Enter your new text.
5. Press to select Save
to select Edit
.
to clear the screen.
.
1. Select Menu
→
Settings
→
Convenience
→
Choosing a menu view
Frequent List
.
Three menu views are available:
2. Select Enabled to include the list or Disabled to
1. Select Menu
→
Settings
→
Display
→
Main
remove it.
Menu View, then the option you want:
Using the Frequent Contacts shortcut
•
From the home screen, press
to select
–
Wheel displays a graphical and
Contacts. Your 15 most frequently called
contacts appear at the top of the list, followed
by your complete contact list.
dynamic view.
–Graphic displays a graphical icon view
of menu items.
Choosing a different language
Your phone may display alternative languages.
1. Select Menu
→
Settings
→
Display
→
Language
.
–List displays a vertical text listing of
menu items.
2. Select a language, and press
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Setting power backlighting
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
2. Press or
up or down to scroll menu
to select one.
views. Press
3. Press
to return to the home screen. The
next time you select Menu, you will see the
Note: Power backlighting may not be available with
menu view you selected.
the optional desktop charger or other accessories.
Adjusting the backlighting
1. Select Menu
→
Settings
.
→
Accessories
→
Your screen lights up while you are in a call or
when you press a key on the keypad. However, you
can set the length of time that bright backlighting
remains on.
Pwr Backlighting
2. Select Always On to keep backlighting on.
Note: The battery charges more slowly when
power backlighting is on.
1. Select Menu
→
Settings
→
Display
→
Backlighting
→
Duration
.
Changing the display contrast
2. Select an option from the list:
1. Select Menu
→
Settings
→
–
5 seconds, 10 seconds, or 30 seconds—
Display
→
Contrast
.
(Default) Turn backlighting on for 5, 10,
or 30 seconds after your last keypress.
2. Press
3. Press
left or right to adjust the contrast.
to select Save
.
–
5 sec. & in call, 10 sec. & in call, or 30 sec. &
in call—Turn backlighting on for the
duration of a call, and for 5, 10, or 30
seconds after your last keypress.
Setting numbers to auto-hyphenate
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
Note: These settings drain the battery more quickly
and reduce talk and standby times.
For example, 1-222-333-4444.
Using Power Save Mode
•
Select Menu
Auto-Hyphen
→
Settings
→
Display
→
You can conserve battery life by activating Power
Save mode to dim the backlight set in the procedure
above. The backlighting appears for the selected
duration but is less bright than with Power Save off.
→
Enabled.
Selecting a screen saver
Screen savers appear on the home screen when the
swivel is open or closed and are activated 10
seconds after the last keypress. Incoming calls and
alerts override screen savers.
•
S
elec
M
t
enu
→
Settings
→
Display
→
On.
Backlighting
→
Pwr Save Mode
→
46
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select Menu
→
Settings
→
Display
→
Choosing a different time/date format
1. Select Menu
Screen Saver
.
→
Settings
→
Display
→
2. Highlight a screen saver and press . The
Time/Date Format
.
image displays.
2. Highlight the option you want.
3. Press to save the setting.
3. Press
to assign the screen saver.
4. Press
to return to the home screen
and wait 10 seconds to view the screen saver
you chose.
Creating a secure environment
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
Note: Downloaded screen savers are added to
the end of the list.
Selecting wallpaper
Changing your lock code
The lock code is typically 0000 or the last 4 digits
of your phone number.
Wallpaper appears on the home screen.
1. Select Menu
→
Settings
→
Display
→
Wallpaper
.
1. Select Menu
→
Settings
→
Security.
2. Highlight a wallpaper design and press
.
2. Enter your four-digit lock code
3. Select Assign to save your selection.
3. Select New Lock Code. A message appears:
4. Press
to return to the home screen.
“Change Code?”
Selecting a color theme
You can select a color theme for the display
background of your phone.
4. Press
to select Yes and enter a new four-
digit code.
5. Enter your new lock code again.
1. Select Menu
→
Settings
→
Display
→
Locking your phone
Color Themes
.
When your phone is locked, you can call only
emergency numbers or your service provider
number. You can still receive incoming calls.
2. Scroll through the options to view the
color themes.
3. Highlight a color theme from the list and
1. Select Menu
→
Settings
→
Security.
press
.
2. Enter your four-digit lock code.
4. Press
to return to the home screen.
3. Select Lock Phone
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
47
4. Highlight an option:
Restricting calls
You can restrict the calls that can be made from
your phone to emergency numbers, your contacts,
and service provider numbers.
–
–
Never does not lock the phone.
On power up locks the phone every time you
turn it on.
–
Now locks the phone immediately.
1. Select Menu
→
Settings
→
Security
.
5. Press
.
2. Enter your four-digit lock code.
3. Select Limit Calls
.
Unlocking the phone
1. From the home screen, press
4. Choose an option:
to
select Unlock
.
–
–
No Limit limits no calls.
2. Enter your four-digit lock code.
Limit Outgoing calls only. Incoming calls can
still be received and answered.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
–
Limit All calls, both incoming and outgoing.
Erasing all contacts
You can erase all entries from your
Contacts directory.
1. Select Menu
→
Settings
→
Security.
2. Enter your four-digit lock code.
1. Select Menu
→
Settings
→
Security.
3. Select Emergency Numbers
.
2. Enter your four-digit lock code.
4. Select an Unassigned slot.
3. Select Delete Contacts
.
5. Enter the phone number, including the area
4. Select Yes to erase all contacts. A message
code. Do not enter 1 before the area code.
appears: “Delete ALL Contacts?”
6. Press
to select Done.
5. Press
to select Yes to erase all contacts.
Notes:
•
You can view these numbers only when they’re
being entered for the first time.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line has
its own phone number.
•
•
You cannot edit these numbers.
To make a call to an emergency number from a
locked phone, you must dial the number
(including area code) exactly as it was stored in
Emergency Numbers.
48
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while the
phone is in data/fax mode. To receive data or faxes,
you must connect the phone to a laptop or PC and
switch the phone from voice mode to data/fax mode.
Note: You must first establish a second phone line
with your service provider. Once established, a
second phone number becomes available in the
menu for selection:
Note: To purchase a cable call (800) 349-4188
(U.S.A. only), (858) 882-1410, or visit
1. Select Menu
→
Settings
→
Network
→
.
Set Phone Line
.
2. Select one of the two lines and press
.
1. Connect the phone to the laptop or PC.
2. Set the Com speed.
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
3. Select Menu
→
Settings
→
Network
→
Data/Fax Calls
.
4. Press
to select an option:
–
–
Voice only—Allow only voice calls.
Fax, next call or Data, next call—Set the
phone to fax mode or data mode for the next
incoming call or the next 10 minutes.
1. Select Menu
→
Settings
.
→
Accessories
→
Com Port Speed
2. Select the speed. The options are: 19.2 kbps
,
–
Fax, until off or Data, until off—Force the
phone into fax mode or data mode until the
phone is turned off.
115.2 kbps (default), 230.4 kbps
.
Note: There may be a higher charge for making
calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.
Note: You cannot receive voice calls while the
phone is in data/fax mode.
User Guide for the Kyocera Koi Phone
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired. Note: Enable TTY only when
using the phone with a TTY device.
1. Connect the TTY device to the phone.
2. Enter
your keypad.
3. Press to select the TTY option.
from
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.), in
markets where service has been implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu
→
Settings
→
Network
→
Location
.
2. At the message prompt, press
to select OK
and continue.
3. Select 911 Only or Location On
.
–
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency code
(911, 000, 111, etc.).
–
Location On shares your position information
with your service provider’s network, in
addition to emergency services.
50
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
10 USING VOICE RECOGNITION
Voice recognition allows you to make and answer calls
by speaking commands into the phone’s microphone.
Editing a voice tag
1. Select Menu
→
Contacts
→
Voice Dial List.
Note: You cannot use voice recognition to end a
2. Highlight the contact you want to edit, and press
call; you must press
when the swivel is open,
to select it.
or press in when the swivel is closed.
3. Highlight the phone number, select Options
.
4. Select Add Voice Dial
Voice Dial
,
Edit Voice Dial, or Erase
Setting up voice dialing
.
To make or receive calls using voice dialing,
5. Follow the prompts.
contacts must be saved with associated voice tags.
Calling using voice tags
Creating a voice tag for a contact
1. If you haven’t already done so, record a voice
1. Select Menu
→
Contacts
→
Add Voice Dial.
tag for the person you wish to call.
2. Follow the voice prompts to record a name
2. With the swivel closed, press and hold in
-or-
for the contact.
3. Highlight an option:
With the swivel open, from the home screen, press
. The phone responds: “Say a name.”
–
Add new—Save a new contact to go with
the voice tag.
3. Say the name of the person you want to call.
–
Add to existing—Add the voice tag to a
4. If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call, or say
No to cancel.
saved contact.
Viewing entries with voice tags
elec Voice Dial List.
•
S
Mt
enu
→
Contacts
→
Note: If the phone finds multiple voice tags that
sound like the name you said, you will be asked
to verify which name you want to call. Say Yes
when you hear the correct name. Say No when
you hear an incorrect name.
A list of all contacts with assigned voice
tags appears.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
51
5. When you are finished with the call,
press if the swivel is open, or in
–
–
S
S
a
“
y
Call” to dial the number.
a“y
Verify” to cause phone to repeat the set
if the swivel is closed. You cannot end the
call with a voice command.
of digits that you input.
–
–
S
ay
“
Cancel” to exit voice recognizer and
return to the home screen.
Erasing voice tags
To erase all voice name dial recordings in your phone:
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
1. Menu
→
Settings
→
Voice Features
→
Delete Voice Dial
.
Using voice features with
hands-free car kits
You can use voice commands to make a phone call
or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
2. Select Yes
.
Calling using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Note: You cannot speak a string of digits. You must
speak one digit at a time and wait for the prompt.
Note: The following features apply only to installed
hands-free car kits unless noted.
1. From the home screen, press
. The phone
responds: “Say a name or say Dial.”
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store or call
800 349-4188 (U.S.A. only) or 858 882-1410.
2. Say “Dial”. The phone responds: “Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice command
to activate the phone to make a phone call.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
–
S
a
“Clear” to erase the digit last entered.
y
Note: Voice Wake-up does not work with
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts you
with “Clear entire phone number?”, say
“Yes” to clear or “No” to cancel.
Keyguard active.
To activate the Voice Wake-up setting:
1. Select Menu
→
Settings
→
Voice Features
→
Voice Wake-Up
→
With ext. pwr.
52
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select Menu
→
Settings
→
.
Keyguard
→
3. Select Menu
→
Settings
→
Silent Mode
.
→
Disabled, then press
Normal Sounds, then press
To wake up the phone:
To answer a call:
1. Say “Wake Up” and listen for a tone.
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
contact entry in your phone, then the phone will say
“Incoming call from (Name), answer?”
2. Say “Wake Up” again until you hear two tones.
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 53.
•
S
a
“Yes” or press any key except the end key.
y
Answering the phone
You can set your hands-free car kit to (1) answer
automatically or (2) answer using a voice command.
Ignoring an incoming call
To ignore an incoming call, do one of the following:
•
•
S
a
“
y
No” and press
to silence the alert.
Answering automatically
You can set your phone to answer automatically.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Note: This setting also works with the portable
hands-free car kit.
Training voice recognition
•
S
elec
M
t
enu
→
Settings
→
Accessories
.
→
If your phone is having trouble recognizing your
Auto-Answer
→
After 5 secs
voice, you can train it with the commands Yes
,
No
,
Answering using voice commands
and Wake up
1. Select Menu
2. Select Voice Training
.
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
→
Settings
→
Voice Features
.
.
3. Read the message and press
to select OK
•
S
elecM
t
enu
→
→
Settings
Disabled
→
.
Accessories
→
and continue. Cancel returns you to the
previous screen.
Auto-Answer
To activate the Voice Answer setting:
4. Select Train All or the item you want to train.
1. Select Menu
→
.
Settings
→
Voice Features
→
5. Follow the prompts for each word until training
Voice Answer
is complete.
2. Highlight Enabled, then press
.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
53
11 TOOLS & GAMES
Voice Memo
4. Press . The recorded voice memo plays
through the phone’s speaker.
The Voice Memo tool allows you to record and play
back audio memos.
Tip: Press up or down to increase or
decrease the phone speaker volume.
Note: Voice memos can be up to 30 seconds
in duration.
5. To review the voice memo, press
left or right
to highlight the play icon
on the screen.
Recording a voice memo
1. SelectMenu→Tools&Games→VoiceMemo→
Record New. The phone says: “Please record at
the tone.”
6. Press . The recorded voice memo plays
through the phone’s speaker.
Tip: Press
7. Highlight the stop icon
finished listening to voice memo and press
to pause the voice memo.
on the screen when
2. Say your memo and press
to select Stop
.
when you are finished.
8. Press
to return to the home screen.
3. Press
to Save your voice memo, or press
Naming a saved voice memo
to Erase your voice memo.
1. SelectMenu→Tools&Games→VoiceMemo→
4. The prompt “Saved” appears.
Recorded Memos
.
5. Press
to return to the home screen.
2. Highlight the memo to save and press
to
Note: If an incoming call is received while
you’re recording a voice memo, the voice memo
is automatically saved and the incoming call screen
is displayed.
select Options
.
3. Press down to select and highlight Rename
.
4. Press . The prompt “Name:” appears along
with a flashing cursor.
Playing or reviewing a voice memo
5. Press
to clear the default name of the
1. SelectMenu→Tools&Games→VoiceMemo→
saved voice memo.
Recorded Memos.
6. Use the keypad to enter a new file name for the
2. Highlight the voice memo to play and press
saved voice memo.
to select Options
.
7. Select Save
.
3. Press
down to select and highlight Play.
8. Press
to return to the home screen.
54
Tools & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a saved voice memo
Creating an event
1. Select Menu
2. Press down to select Add Event
1. SelectMenu→Tools&Games→VoiceMemo→
→
Tools&Games
→
Scheduler.
Recorded Memos
.
.
2. Highlight the memo to send and press
to
3. Enter a name for the event. For help entering
select Send. This will automatically take you to
the multimedia message function.
text, see page 26.
4. Select Next
.
3. Enter the recipient’s phone number or email
5. Enter the time, length, and alarm for event.
address in the To: field.
–
Press
minutes, and timing of alarm.
Press left or right to move between fields.
up or down to select hour,
4. Press
down once to enter a message in the
Subject: field.
–
5. Press
down once to enter a text message in
6. Select Next, enter a note if required.
7. Select Done
the Text: field.
.
6. Press
to select Send. This will send your
saved voice memo.
Viewing, editing, or erasing an event
1. Select Menu .
→
Tools&Games
→
Scheduler
Erasing a saved voice memo
2. Select View Day or View Month to find the event
1. SelectMenu→Tools&Games→VoiceMemo→
you want to view, edit, or erase.
Recorded Memos
.
3. Press
up, down, left, or right to highlight an
to select it.
right and press to select Edit or
2. Highlight the memo to erase and press
to
event and press
select Options
.
4. Press
3. Press down to select and highlight Erase
.
Options. Follow the prompts.
4. Press . The prompt “Erase file?” appears.
5. Press to return to the home screen or
5. Select Yes or No.
to return to scheduler options.
6. Press
to return to the home screen.
Alarm Clock
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
Use the Alarm Clock to set an alert for a specific
time. The alert occurs only if the phone is on.
1. Select Menu
2. Select Set
→
Tools&Games
→
Alarm Clock
.
User Guide for the Kyocera Koi Phone
55
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
–
Press
and minutes.
up or down to select an hour
Calculator
Use the calculator for basic mathematical equations.
Press
left or right to switch between
1. Select Menu
→
Tools&Games
→
Calculator
.
hours, minutes, and a.m./p.m.
2. Use the keypad to enter numbers.
Use the phone keypad to enter numbers.
3. Use
to highlight mathematical operations.
to calculate the result.
3. Press
to select Done and save the setting.
4. Press
4. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
Example: Enter 5, press
enter 2, then press
left to highlight
X,
to obtain the result of 10.
5. Press
to return to the home screen.
to clear the screen.
Tip: Press
Navigation
Tip Calculator
:
The Tip Calculator helps you calculate how much
tip to include on a bill.
=
÷
equal
divide
+
-
add
x
multiply
1. Select Menu
→
Tools&Games
→
Tip
subtract
Calculator
.
Options
2. Enter the amount of your bill.
3. Select Next
Adds displayed digit to the value stored
in memory.
.
M+
4. Select the amount you want to include as a tip
(10%, 15%, 18%, 20%, Other) and press
Your total bill appears, including tip.
MR
MC
Displays currently stored value on screen.
Clears value currently stored in memory.
.
5. To split the bill, press
to select Split.
Timer
6. Press to clear the default of 2 guests.
This timer counts down for a specified amount of
time. It beeps when that amount of time has elapsed.
7. Enter the number of guests and press
to select Next. The amount each guest pays
is calculated.
1. Select Menu
→
Tools&Games
→
Timer
.
2. Select Set
.
8. Select Done
.
3. Press
up or down to set the hours, minutes,
and seconds. To move the cursor, press
or right.
left
56
Tools & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Start and begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
2. Press
3. Highlight an option and press
New Game—Initiates game play. To pause the
game, press . You return to the menu
at the splash screen.
to select it.
5. Press
to silence the alarm and return to
where you can Continue Game or choose from
other available options.
the home screen.
Resume Saved—Returns you to the game you
were last playing.
Stopwatch
1. Select Menu
→
Tools&Games
→
Stopwatch.
Scoreboards—Displays the top five scores
for the different game variations.
2. Select Start to begin counting.
3. Select Stop to stop counting.
Settings—Choose a level of play, sounds,
and game type.
4. Select Reset to clear the counter.
5. Press
to return to the home screen.
Navigation: Use the following keys to guide the
blocks down the screen:
To:
Games
Use:
The games in this section may not be available
on your phone. Check with your service provider
for availability.
Rotate
Counterclockwise
,
,
, or
If you receive an incoming call alert while you are
playing Tetris™ or Race 21™, the game is paused
and exited. You can return to play once the call
alert ends. Games do not remain paused if the
phone is turned off or loses power.
,
or
Rotate clockwise
,
up
Move left
or
left
Move right
or
or
right
down
Tetris
The goal of this game is to guide the falling blocks
down the screen to create a solid horizontal row at
the bottom. The game ends when the new block
cannot enter the play field because the area is
occupied by another block or obstacle.
Soft drop
Hard drop
Return to Tetris menu
Pause/End Pause
1. Select Menu
→
Tools&Games
→
Tetris.
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
57
6. Select an option and press
to select it.
New Game—Initiates game play. To pause
the game, press . From here you can
Race 21
–
This game is a timed variation of Black Jack. Each
game comprises three 90-second rounds. To score
points, add cards in each of the four columns,
trying to reach but not exceed 21 in each column
within during the course of the game. To play:
choose Resume, New or Quit.
–
–
–
Resume Game—Returns you to the game
you were last playing.
1. Select Menu
2. Press
→
Tools&Games
→
Race 21.
Scoreboard—Provides you with the top
five scores.
at the splash screen.
Music—Choose when you hear music with
this game. Select from Music Always
3. Select New Game. The first card to be placed is
shown at the top left of the screen. Press a key
to add a card to the row as follows:
,
Sound
Effects
,
Instructions
,
Credits
,
During Title
,
or No Music.
Add cards to the first row
Add cards to the second row
Add cards to the third row
Add cards to the fourth row
7. Press
to end all games.
Doodler
You can create and save graphics on your phone.
Shortcut: Press
left or right to choose
1. Select Menu
2. Press
3. Select New Doodle to open the drawing screen
The cursor is located in the middle of the screen.
→
Tools&Games
→
Doodler.
arrows at the bottom of the screen. Then press
to add cards to corresponding rows.
Note: Each time you place a card, a new card
appears for placement.
at the splash screen.
4. Select Options to choose the Tools Lines, or
,
4. Continue placing cards until you are satisfied
Shape you want to use.
with your selections.
5. Use keys 1–9 or
to move
–
–
–
You can pause or end the game at any time
by pressing
the cursor around the screen
as indicated.
.
You lose points each time you exceed 21 in
a column.
6. When finished, select Options
→
Save. The image is saved
S
elec
to select
advance to the next round
S
t
kip to skip one card per round.
to My Pictures.
5. Press
to get your score and
.
58
Tools & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
To move cursor away from drawing:
1. Select Options Tools
2. Select , then Done
Saving a doodle
It is a good idea to save the doodle while you are
working on it. If you receive a call while creating an
unsaved doodle, it will be lost.
→
.
.
3. Press a number key to move the cursor.
•
Select Options
The image will be saved in Menu
→
Save and press
.
To erase part of drawing:
→
Media
1. Select Options
→
Tools.
Gallery
→
Images
→
Doodles.
2. Select , then Done
.
3. Press a number key to move the eraser.
Resuming a doodle
To return to another saved doodle:
Select Menu
To Navigate: Use the following keys to doodle.
To:
Use:
•
→
Tools&Games
→
Doodler
Media
→
Select Options
Resume Doodle
.
Clear screen
Note: You can also go to Menu
→
Shortcut to Tools
Draw, erase, or move cursor/
shape UP
Gallery
→
Images
→
Doodles.
up
Draw, erase, or move cursor/
shape DOWN
Draw, erase, or move cursor/
shape LEFT
down
left
Draw, erase, or move cursor/
shape RIGHT
right
Return cursor to center
Previous screen
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
59
12 CONNECTING TO THE INTERNET
Using the Web Browser
3. Press
to select Yes to enable security.
When you are connected, a browser home page
appears. It has a list of bookmarks and some
Web menu options at the bottom of the screen.
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
–
–
A
appears in a secure session.
An underline and an arrow indicate that
there is more text. Press down to view
to return to the
Note: You cannot receive incoming calls while you
are using the Web Browser.
more text. Press
previous screen.
Starting the Web Browser
1. Select Menu
→
Web Browser.
–
To choose a site, highlight it and press
to select Go
4. When you have finished using the Internet,
press to exit the browser.
.
A message about airtime fees appears every
time you start the browser.
To cancel the message, see “Changing the Web
prompt” on page 61.
Using the Web menu options
The following options may appear on your screen:
For more information about how airtime is
charged, contact your service provider.
•
Home returns you to the main Web Browser
window, or home page.
2. Press
to continue.
If this is the first time you have connected to the
Internet, a message informs you that security is
not yet enabled for your Web Browser.
•
Mark Site saves the current location as a
bookmark for easy access.
•
•
Bookmarks displays a list of your saved Web sites.
Setup gives you options for changing how
information is displayed.
–
–
Show URL displays the entire URL.
About Openwave displays information
about your Web Browser version.
60
Connecting to the Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Encryption should not be used unless you are
instructed to do so by your service provider.
Changing the Web prompt
1. Select Menu
→
Settings
→
Convenience
→
UP.Link selects a different browser server.
You can use this option if you have more
than one Web Browser account.
Web Prompt
.
2. Highlight an option and press
to select it:
–
At Start confirms that airtime fees will be
–
Restart restarts the Web Browser.
applied when you use the browser.
–
–
At End verifies you want to exit the browser.
Searching for a Web site
How you search for a Web site depends on your
service provider. For more information, contact
your service provider.
Both prompts you when you start the
browser and exit the browser.
–
No Prompts does not use any prompts.
Going to a bookmarked site
1. Select Menu
→
Web Browser. If you see a
message prompt, press
to continue.
2. From your Web home page, select Bookmarks
.
A list of bookmarks appears.
3. Enter the number corresponding to the
bookmark you want and press
.
Checking Net alerts
Alerts received from a Web site are sent to your Net
Alerts inbox.
1. Select Menu
→
Messages
→
Net Alerts.
This action launches the browser inbox.
2. Press
to accept browser fees.
3. Select an alert and follow the prompts.
User Guide for the Kyocera Koi Phone
61
Download from Www.Somanuals.com. All Manuals Search And Download.
13 GETTING HELP
Customer support
India:
Toll free#: 1-600-121214
Toll#: 0124-284-5000
Your service provider’s customer support
Mexico:
001-866-650-5103
department may be accessible directly from your
phone when you dial a number such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available to
you, such as call forwarding or voicemail.
New Zealand: 0-800-990-100
Panama:
Peru:
001-800-201-1984
0-800-51-934
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
For questions about the phone features, refer to the
materials provided with your phone, or visit
Before requesting support, please try to reproduce
and isolate the problem. When you contact the
Customer Care Center, be ready to provide the
following information:
.
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
•
•
The name of your service provider.
The actual error message or problem you
are experiencing.
•
•
•
Web site: www.kyocera-wireless.com
Email: [email protected]
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401.
–
To locate the ESN select Menu
Info and scroll down to ESN: for the
11-digit number.
→
Phone
•
Customer support phone numbers are also
available in the following countries:
Argentina:
Australia:
Brazil:
0-800-666-0052
800-507-000
0-800-55-2362
800-43-1212
Chile:
Colombia:
01-800-700-1546
62
Getting Help
Download from Www.Somanuals.com. All Manuals Search And Download.
Qualified service
If the problem with your phone persists, return the
phone with all accessories and packaging to the
dealer for qualified service.
Phone accessories
To shop for Koi phone accessories, visit
www.kyocera-wireless.com/store. You may also
call us at (800) 349-4188 (U.S.A. only) or
(858) 882-1410.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including cellular
or PCS phones, visit beta.kyocera-wireless.com
.
User Guide for the Kyocera Koi Phone
63
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Numerics
Contacts directory, 16
contrast, 46
Tetris, 57
1-Touch dialing, 12
H
countdown timer, 56
A
hands-free car kit
answering using voice, 53
purchasing, v, 63
hands-free headset
purchasing, v, 63
hard pause, 16
custom menu
Alarm Clock, 8, 55
creating, 44
updating, 44
alerts
for messages, 44
for missed calls, 11
analog mode, 8
auto-hyphenation, 46
AutoText, 32, 33, 37
D
data/fax setup, 14, 49
digital mode, 8
Direct View, 35
display contrast, 46
Doodler, 58
I
icons, 8
InBox, 35
B
banner, 45
K
battery, 1
E
Kilobyte timer, 14
blocking outgoing calls, 48
emergency
L
calls, 13
C
language, 45
lights
lights-only mode, 8, 42
limiting calls out, 48
lock code, 47
locking
emergency mode, 14
exit emergency mode, 14
position location, 8, 50
erasing
Calculator, 56
call counters, 14
callback number, 33
calls
contact entries, 48
text messages, 36
answering, 10
ending, 9
phone, 47
ignoring, 10
F
M
missed, 11
Fast Find, 18
memory, saving, 36
menu view, 45
redialing, 9
fax mode, 49
silencing, 10
finding a saved phone number, 18
camera
flip
N
menu options, 22
recording video, 23
sending a picture, 22
setting up, 19
taking a picture, 19
color themes, 47
Com Port speed, 49
answering calls, 10
frequent contacts, 18
number mode, 26
O
G
games
OutBox, 34
P
Doodler, 58
Race 21, 58
phone book (Contacts directory),
16
64
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
phone numbers
editing, 17
Stopwatch, 57
symbol mode, 27
finding, 18
saving, 16
verifying your own, 7
T
technical support, 62
Tetris, 57
phone, unlocking, 47
position location, 8, 50
power save mode, 9
prepend, 11, 17
text entry, 26
quick reference, 28
text messages, 32, 38
time format, 47
Timer, 56
R
Race 21, 58
recent call icons, 11
resetting the phone, iv
ringers
timing calls, 14
Tip Calculator, 56
TTY/TDD, 50
U
choosing types, 42
for roaming calls, 15
silencing, 7
unlocking the phone, 48
V
vibrate, 8, 42
Voice Answer, 53
voice dialing, 51
voice memo
erasing, 55
naming, 54
recording, 54
voicemail, 13
setting up, 7
volume
volume, 43
roaming, 8
alerts, 15
controlling, 14
ringer, 15
S
saved phone numbers
editing, 17
finding, 18
Scheduler, 55
screen contrast, 46
screen icons, 8, 26, 34, 42
screen savers, 46
secret contacts, 11
security, 47
earpiece, 13, 43
key beep, 44
ringer, 43
W
wallpaper, 47
Web Browser, 60
silent mode, 8, 42
speakerphone
turning off, 11
turning on, 10
User Guide for the Kyocera Koi Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
|