Kyocera Cell Phone S2410 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Openwave is a trademark of Openwave Systems  
Incorporated. eZiText is a registered trademark of  
Zi Corporation. TransFlash is a trademark of  
SanDisk Corporation. Bluetooth trademarks are  
owned by Bluetooth SIG, Inc. and used by  
Kyocera Wireless Corp. under license.  
S2410 User Guide  
This manual is based on the production version of  
the Kyocera S2410 phone. Software changes may  
have occurred after this printing. Kyocera reserves  
the right to make changes in technical and product  
specifications without prior notice. The products  
and equipment described in this documentation are  
manufactured under license from QUALCOMM  
Incorporated under one or more of the following  
U.S. patents:  
All other trademarks are the property of  
their respective owners.  
Copyright © 2008 Kyocera Wireless Corp.  
All rights reserved.  
4,901,307 5,109,390 5,267,262 5,416,797 5,506,865  
5,544,196 5,657,420 5,101,501 5,267,261 5,414,796  
5,504,773 5,535,239 5,600,754 5,778,338 5,228,054  
5,337,338 5,710,784 5,056,109 5,568,483 5,659,569  
5,490,165 5,511,073  
Ringer Tones Copyright © 2000-2008  
Kyocera Wireless Corp.  
82-K8216-1EN, Rev. 001  
FCC Notice  
The Kyocera Wireless Corp. (“KWC”) products  
described in this manual may include copyrighted  
KWC and third party software stored in  
This device complies with part 15 of the FCC  
rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation. To maintain  
compliance with FCC RF exposure guidelines, if  
you wear a handset on your body, use the Kyocera  
Wireless Corp. (KWC) supplied and approved  
accessory designed for this product. Using  
semiconductor memories or other media. Laws in  
the United States and other countries preserve for  
KWC and third party software providers certain  
exclusive rights for copyrighted software, such as  
the exclusive rights to distribute or reproduce the  
copyrighted software. Accordingly, any copyrighted  
software contained in the KWC products may not  
be modified, reverse engineered, distributed or  
reproduced in any manner not permitted by law.  
accessories that are not supplied or approved by  
KWC may violate FCC RF exposure guidelines.  
Furthermore, the purchase of the KWC products  
shall not be deemed to grant—either directly or by  
implication, estoppel, or otherwise—any license  
under the copyrights, patents, or patent  
applications of KWC or any third party software  
provider, except for the normal, non-exclusive  
royalty-free license to use that arises by operation  
of law in the sale of a product.  
Other accessories used with this device for  
body-worn operations must not contain any  
metallic components and must provide at least  
15 mm separation distance including the  
antenna and the user’s body.  
THIS MODEL PHONE MEETS THE  
GOVERNMENT’S REQUIREMENTS FOR  
EXPOSURE TO RADIO WAVES.  
Kyocera is a registered trademark of Kyocera  
Corporation. Brick Attack and Race 21 are  
trademarks of Kyocera Wireless Corp.  
QUALCOMM is a registered trademark of  
QUALCOMM Incorporated.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your wireless phone is a radio transmitter and  
receiver. It is designed and manufactured to not  
exceed the emission limits for exposure to radio  
frequency (RF) energy set by the Federal  
While there may be differences between the  
SAR levels of various phones and at various  
positions, they all meet the government  
requirement for safe exposure.  
Communications Commission of the U.S.  
Government. These limits are part of  
The FCC has granted an Equipment  
Authorization for this model phone with all  
reported SAR levels evaluated as in compliance  
with the FCC RF emission guidelines. SAR  
information on this model phone is on file with the  
FCC and can be found under the Display Grant  
section www.fcc.gov/oet/ea after searching on the  
FCC ID: OVF-K33BI04.  
comprehensive guidelines and establish permitted  
levels of RF energy for the general population. The  
guidelines are based on standards that were  
developed by independent scientific organizations  
through periodic and thorough evaluation of  
scientific studies. The standards include a  
substantial safety margin designed to assure the  
safety of all persons, regardless of age and health.  
Additional information on SAR can be found  
on the Cellular Telecommunications and  
Internet Association (CTIA) web-site at  
The exposure standard for wireless mobile phones  
employs a unit of measurement known as the  
Specific Absorption Rate, or SAR. The SAR limit set  
by the FCC is 1.6 W/kg.*  
* In the United States and Canada, the SAR limit for  
mobile phones used by the public is 1.6 watts/kg  
(W/kg) averaged over one gram of tissue. The  
standard incorporates a substantial margin of  
safety to give additional protection for the public  
and to account for any variations in measurements.  
Tests for SAR are conducted using standard  
operating positions specified by the FCC with the  
phone transmitting at its highest certified power  
level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the network.  
In general, the closer you are to a wireless base  
station antenna, the lower the power output.  
®
Bluetooth Certification  
For information about S2410 Bluetooth  
Certification, visit the Bluetooth Qualification  
Program Web site at qualweb.bluetooth.org.  
Caution  
The user is cautioned that changes or modifications  
not expressly approved by the party responsible for  
compliance could void the warranty and user’s  
authority to operate the equipment.  
Before a phone model is available for sale to the  
public, it must be tested and certified by the FCC  
that it does not exceed the limit established by the  
government-adopted requirement for safe  
exposure. The tests are performed in positions and  
locations (e.g., at the ear and worn on the body) as  
required by the FCC for each model.  
Optimize your phone’s performance  
Use the guidelines in this user guide to learn how to  
optimize the performance and life of your phone  
and battery.  
Body-worn measurements differ among phone  
models, depending upon availability of accessories  
and FCC requirements.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
iii  
Air Bags  
Potentially unsafe areas  
If you have an air bag, DO NOT place installed or  
portable phone equipment or other objects over the  
air bag or in the air bag deployment area. If  
equipment is not properly installed, you and your  
passengers risk serious injury.  
Posted facilities—Turn your phone off in any  
facility when posted notices require you to do so.  
Aircraft—FCC regulations prohibit using your  
phone on a plane that is in the air. Turn your  
phone off or switch it to Airplane Mode before  
boarding aircraft.  
Medical devices  
Vehicles—RF signals may affect improperly  
installed or inadequately shielded electronic  
systems in motor vehicles. Check with the  
manufacturer of the device to determine if it is  
adequately shielded from external RF energy.  
Pacemakers—Warning to pacemaker wearers:  
Wireless phones, when in the ‘on’ position, have  
been shown to interfere with pacemakers. The  
phone should be kept at least six (6) inches away  
from the pacemaker to reduce risk.  
Blasting areas—Turn off your phone where  
blasting is in progress. Observe restrictions, and  
follow any regulations or rules.  
The Health Industry Manufacturers Association and  
the wireless technology research community  
recommend that you follow these guidelines to  
minimize the potential for interference.  
Potentially explosive atmospheres—Turn off your  
phone when you are in any area with a potentially  
explosive atmosphere. Obey all signs and  
instructions. Sparks in such areas could cause an  
explosion or fire, resulting in bodily injury or death.  
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked.  
Always keep the phone at least six inches  
(15 centimeters) away from your pacemaker  
when the phone is turned on.  
Do not carry your phone near your heart.  
Use the ear opposite the pacemaker.  
If you have any reason to suspect that  
interference is taking place, turn off your  
phone immediately.  
They include:  
fueling areas such as gas stations  
below deck on boats  
transfer or storage facilities for fuel or  
chemicals  
Hearing aids—Some digital wireless phones  
may interfere with hearing aids. In the event of  
such interference, you may want to consult your  
service provider or call the customer service line  
to discuss alternatives.  
vehicles using liquefied petroleum gas, such as  
propane or butane  
areas where the air contains chemicals or  
particles such as grain, dust, or metal powders  
any other area where you would normally be  
advised to turn off your vehicle engine  
Other medical devices—If you use any other  
personal medical device, consult the manufacturer  
of the device to determine if it is adequately  
shielded from external RF energy. Your physician  
may be able to help you obtain this information.  
Using phone with care  
In health care facilities—Turn your phone off in  
health care facilities when instructed. Hospitals and  
health care facilities may be using equipment that is  
sensitive to external RF energy.  
Use only in normal position (to ear). Avoid dropping,  
hitting, bending, or sitting on the phone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iv  
NCRP Report 86 (National Council  
on Radiation Protection and  
Measurements, 1986)  
ICNIRP (International Commission on  
Non-Ionizing Radiation Protection, 1996)  
Avoiding magnetic environments  
Keep the phone away from magnets which can  
cause improper functioning of the phone.  
Keeping phone dry  
Keep the phone dry. Damage can result if the  
phone gets wet. Water damage is not covered  
under warranty.  
Your phone complies with the standards set by  
these reports and the FCC guidelines.  
E911 mandates  
Resetting the phone  
Where service is available, this handset complies  
with the Phase I and Phase II E911 Mandates  
issued by the FCC.  
If the screen seems frozen and the keypad does not  
respond to keypresses, reset the phone by  
completing the following steps:  
Hearing Aid Compatibility (HAC) with Mobile Phones  
1. Remove the battery door.  
Some mobile phones and hearing devices (hearing  
aids and cochlear implants), when used together,  
result in buzzing, humming, or whining noises  
detected by the user. Some hearing devices are  
more immune than others to this interference noise,  
and phones also vary in the amount of interference  
they generate.  
2. Remove and replace the battery.  
If the problem persists, return the phone to the  
dealer for service.  
Accessories  
Use only Kyocera-approved accessories with  
Kyocera phones. Use of any unauthorized  
accessories may be dangerous and will invalidate  
the phone warranty if said accessories cause  
damage or a defect to the phone.  
The wireless telephone industry has developed  
ratings for some of their mobile phones, to assist  
hearing device users in finding phones that may be  
compatible with their hearing devices. Not all  
phones have been rated.  
Radio Frequency (RF) energy  
Your telephone is a radio transmitter and receiver.  
When it is on, it receives and sends out RF energy.  
Your service provider’s network controls the power  
of the RF signal. This power level can range from  
0.006 to 0.6 watts. In August 1996, the U.S. Federal  
Communications Commission (FCC) adopted RF  
exposure guidelines withsafetylevels for hand-held  
wireless phones. These guidelines are consistent  
with the safety standards previously set by both  
U.S. and international standards bodies in the  
following reports:  
Phones that are rated have the rating on their box  
or a label on the box. The ratings are not  
guarantees and results will vary depending on the  
user’s hearing device and hearing loss. If your  
hearing device happens to be vulnerable to  
interference, you may not be able to use a rated  
phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your  
personal needs.  
M-Ratings—Phones rated M3 or M4 meet  
FCC requirements and are likely to generate  
less interference to hearing devices than phones  
that are not labeled. M4 is the better/higher of the  
two ratings.  
ANSI C95.1 (American National Standards  
Institute, 1992)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
v
T-Ratings—Phones rated T3 or T4 meet FCC  
requirements and are likely to be more usable with  
a hearing device’s telecoil (“T Switch” or  
“Telephone Switch”) than unrated phones. T4 is the  
better/higher of the two ratings. (Note that not all  
hearing devices have telecoils in them.)  
Hearing devices may also be measured for  
immunity to this type of interference. Your hearing  
device manufacturer or hearing health professional  
may help you choose the proper rating for your  
mobile phone. The more immune your hearing aid  
is, the less likely you are to experience interference  
noise from mobile phones.  
For more information about hearing aid  
compatibility, visit the FCC's Consumer &  
Governmental Affairs Bureau Web site at  
Kyocera Wireless Corp.  
To purchase accessories, visit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi  
Table of Contents  
Message groups . . . . . . . . . . . . . . . . . . . . . . . . . 23  
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1  
Phone battery. . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Phone overview . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Basic navigation . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Guide conventions . . . . . . . . . . . . . . . . . . . . . . . .7  
7
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . .24  
View contacts directory . . . . . . . . . . . . . . . . . . . 24  
Add contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Customize contacts . . . . . . . . . . . . . . . . . . . . . . 25  
Contact groups. . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Search contacts . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Delete all contacts . . . . . . . . . . . . . . . . . . . . . . . 29  
Contacts count . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
2
Basic Functions . . . . . . . . . . . . . . . . . . . . . 8  
Power up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Make phone calls. . . . . . . . . . . . . . . . . . . . . . . . .8  
Answer phone calls . . . . . . . . . . . . . . . . . . . . . . .8  
End phone calls . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Verify your phone number . . . . . . . . . . . . . . . . . .9  
Activate voice dialing . . . . . . . . . . . . . . . . . . . . . .9  
8
9
Browser. . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Launch browser. . . . . . . . . . . . . . . . . . . . . . . . . 30  
Use browser options . . . . . . . . . . . . . . . . . . . . . 30  
Search for a Web site . . . . . . . . . . . . . . . . . . . . . 31  
Use a bookmark . . . . . . . . . . . . . . . . . . . . . . . . 31  
Check browser alerts . . . . . . . . . . . . . . . . . . . . . 31  
Set Web alert . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
3
Call Features . . . . . . . . . . . . . . . . . . . . . . 10  
Volume control . . . . . . . . . . . . . . . . . . . . . . . . .10  
Hold call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
1-Touch dialing . . . . . . . . . . . . . . . . . . . . . . . . .10  
Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Roaming calls . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Emergency services . . . . . . . . . . . . . . . . . . . . . .11  
Airplane mode . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Downloads . . . . . . . . . . . . . . . . . . . . . . . .32  
How does BREW work? . . . . . . . . . . . . . . . . . . . 32  
Download an application . . . . . . . . . . . . . . . . . . 32  
Open an application. . . . . . . . . . . . . . . . . . . . . . 33  
View application details . . . . . . . . . . . . . . . . . . . 33  
Remove an application. . . . . . . . . . . . . . . . . . . . 33  
Disable an application . . . . . . . . . . . . . . . . . . . . 33  
Check available memory . . . . . . . . . . . . . . . . . . 33  
4
5
Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Text entry modes . . . . . . . . . . . . . . . . . . . . . . . .13  
Text entry quick reference . . . . . . . . . . . . . . . . .15  
10 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Voice memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Tip calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
World clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . 16  
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Kilobyte counter. . . . . . . . . . . . . . . . . . . . . . . . .17  
6
Messaging . . . . . . . . . . . . . . . . . . . . . . . . 18  
Text messages . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Erase messages . . . . . . . . . . . . . . . . . . . . . . . . .20  
Work with messages. . . . . . . . . . . . . . . . . . . . . .20  
Message settings. . . . . . . . . . . . . . . . . . . . . . . . .22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
vii  
11 Media Gallery . . . . . . . . . . . . . . . . . . . . . . 39  
Access folders. . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Browse images . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Browse sounds . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Playback tools. . . . . . . . . . . . . . . . . . . . . . . . . . 40  
12 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Menu options . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Convenience . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Voice features . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
13 Voice Commands. . . . . . . . . . . . . . . . . . . 55  
Voice dial list . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Voice commands. . . . . . . . . . . . . . . . . . . . . . . . 55  
Voice command settings . . . . . . . . . . . . . . . . . . 57  
14 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 58  
Customer support . . . . . . . . . . . . . . . . . . . . . . . 58  
Qualified service . . . . . . . . . . . . . . . . . . . . . . . . 58  
Phone accessories. . . . . . . . . . . . . . . . . . . . . . . 58  
Become a product evaluator . . . . . . . . . . . . . . . 58  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii  
1
Getting Started  
Charge the battery  
You must have at least a partial charge in the  
battery to make or receive calls.  
Phone battery  
Install the battery  
To install the battery:  
To charge the battery:  
1. Hold the phone  
1. Connect the AC adapter  
to the microUSB jack on  
the side of the phone.  
face down.  
2. Find notch directly  
below the back cover. It  
is square. Using your  
thumbnail, lift the cover  
to remove.  
2. Plug the adapter into a  
wall outlet.  
The battery icon in the  
upper-right corner of the screen tells you whether  
the phone is:  
3. Place the battery in the  
battery casing with the  
metal contacts facing  
toward the top of the  
phone. The metal  
Charging (the icon is animated)  
Partially charged  
Fully charged  
You can safely recharge the battery at any time,  
even if it has a partial charge.  
contacts of the battery  
must make contact with  
the metal contacts of  
the battery casing.  
Warning: The battery will not charge if you use  
the phone while it is connected to an AC adapter.  
4. Replace the battery  
door by lining up the  
Note: Before removing the battery, make sure the  
phone is powered off.  
notches with the  
openings at the top and on each side of the  
battery casing.  
5. Snap the cover into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
1
Replace the battery only with another qualified  
battery. Use of an unqualified battery may  
present a risk of fire, explosion, leakage, or  
other hazard. If you are unsure about whether  
a replacement battery is compatible, contact  
customer support.  
Promptly dispose of used batteries in  
accordance with local regulations and  
recycle if possible. Do not dispose as  
household waste.  
Supervise all battery usage by children.  
Avoid dropping the phone or battery. If  
the phone or battery is dropped, especially  
on a hard surface, an internal short-circuit  
can occur and pose a safety hazard. If you  
suspect battery damage, take it to a service  
center for inspection.  
Battery care  
General safety guidelines  
Do not disassemble or open the battery.  
Do not crush, bend, deform, puncture, or  
shred the battery.  
Do not attempt to insert foreign objects into  
the battery.  
Do not immerse the battery or expose it to  
water or other liquids. Even if a battery  
appears to dry out and operate normally,  
internal parts can slowly corrode and pose a  
safety hazard.  
Always keep the battery between 15 °C and  
25 °C (59 °F and 77 °F). Do not expose the  
battery to extremes of temperature (heat or  
cold), fire, or other hazards such as a cooking  
surface, iron, or radiator.  
Improper battery use may result in a fire,  
explosion, or other hazard.  
Never use any damaged battery.  
Only use the battery for its intended phone.  
Only use the battery with a qualified charger.  
Use of an unqualified battery charger  
may present a risk of fire, explosion,  
leakage, or other hazard. If you are  
unsure about whether a charger is  
qualified, contact customer support.  
Do not short-circuit the battery or  
allow metallic conductive objects—such  
as keys, coins, or jewelry—to contact  
the battery’s terminals.  
Common causes of battery drain  
Playing games or using the Web.  
Taking pictures with the flash on.  
Keeping backlighting on.  
Operating in digital mode when far away from  
a base station or cell site.  
Using data cables or accessories.  
Operating when no service is available, or  
service is available intermittently.  
High earpiece and ringer volume settings.  
Repeating sound, vibration, or lighted alerts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone battery  
2
Phone overview  
Get to know your phone  
The phone is shown here in the open position.  
1. Earpiece speaker.  
2. Home screen.  
3. Left softkey accesses menus and functions on the left side of  
the screen.  
4. Navigation key scrolls through lists and text entry fields and  
accesses shortcuts from the home screen.  
5. Speakerphone key activates the speakerphone and answers  
incoming calls.  
6. Send key starts or answers a call. Press once to activate  
voice command, twice to display the All Calls list, and three  
times to redial the last number dialed. Press and hold to  
access voice shortcuts.  
7. Keypad for entering numbers, letters, or symbols.  
8. * Shift key changes the text mode in text entry.  
9. Right softkey accesses menus and functions on the right side  
of the screen.  
10. OK key selects a menu item or option.  
11. Back key erases characters in text entry and returns you to  
the previous screen when navigating through menus.  
12. End key turns the phone on and off, ends a call or browser  
session, and returns you to the home screen.  
13. # Space key enters a space during text entry. Press and hold  
to activate or deactivate Silent mode.  
14. 0 Next key cycles through word choices during text entry.  
15. Microphone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
3
The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent  
accidental key presses.  
1. Jack for a hands-free headset (sold separately).  
2. Volume key raises or lowers ringer volume.  
3. External screen displays time and phone status.  
4. Jack for A/C power adapter (included) and for microUSB cable  
(sold separately).  
Warning: Inserting an accessory into the incorrect jack will  
damage the phone.  
Common keys  
The following keys are pressed frequently when you use your phone. Throughout this user guide, these  
keys will be referred as follows:  
Send key (also referred to as the Talk key)  
End key (also referred to as the Power key)  
Back key  
Navigation key  
OK key  
Left softkey  
Right softkey  
Speakerphone key  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone overview  
4
Screen icons  
These icons may appear on your phone’s screen:  
Bluetooth wireless technology is disabled (Off).  
The phone is operating in IS95 digital mode.  
The phone is roaming outside of its home  
service area.  
The phone is operating in IS2000 (1X)  
digital mode.  
New text message.  
The phone is receiving a signal. You can  
make and receive calls. Fewer bars indicate  
a weaker signal.  
New voice message.  
The phone is in airplane mode.  
A call is in progress.  
New voice and text message.  
The phone is set to light up instead of ring.  
The phone has a high speed data connection.  
The phone is set to vibrate or to vibrate and  
then ring.  
The phone is not receiving a signal. You cannot  
make or receive calls.  
The speaker phone is turned on.  
Content is DRM protected.  
Position location is set to your service provider  
and to emergency services.  
Data service is available and active on  
your phone. Check with your service  
provider for availability.  
Position location is set to emergency  
services only.  
The phone is set to auto answer.  
(blinking) The phone is sending data.  
(blinking) The phone is receiving data.  
The phone is in privacy mode or is accessing a  
secure Web site.  
Data service is available, but the phone is  
dormant.  
The alarm clock is set.  
Bluetooth wireless technology is enabled (On).  
The battery is fully charged. The more black  
bars, the greater the charge.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
5
Main menu  
The contents of the main menu are as follows:  
Recent Calls  
All  
Incoming  
Outgoing  
Missed  
Settings  
Bluetooth  
Convenience  
Display  
Tools  
Voice Memo  
Scheduler  
Alarm Clock  
Tip Calculator  
Calculator  
Timer  
Sounds  
Data  
Voice Features  
Accessories  
Network  
Erase Call List  
Call Timer  
Kilobyte Counter  
Stopwatch  
World Clock  
Security  
Contacts  
View All  
Add New  
Groups  
Speed Dial List  
Voice Dial List  
Erase Contacts  
Contacts Count  
Messaging  
New Text Msg  
Voicemail  
Browser  
Launches the Browser  
Downloads  
Accesses your downloaded content  
Inbox  
Browser Alerts  
Sent Msgs  
Outbox  
Saved Msgs  
Drafts  
Msg Settings  
Message Groups  
Erase Msg  
Phone Info  
Build Info  
Icon Keys  
Media Gallery  
Images  
Sounds  
Delete All  
Note: The menu items on your phone can change depending on the services provided by your service provider.  
Check with your service provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Main menu  
Basic navigation  
Pressing your phone keys accesses the various  
menus and other features of your phone. Some of  
the basic keys that are used frequently are:  
Guide conventions  
In this guide, the following conventions are used  
when describing phone features.  
Select means to press the left softkey, right  
softkey or OK key to select an item seen on the  
display. For example, “Select Menu” tells you to  
physically press the left softkey to choose Menu  
from the display.  
Left softkey: Selects items that appear on the  
lower left of the display. At the home screen,  
you can select Menu.  
Right softkey: Selects items that appear on  
the lower right of the display. At the home  
screen, you can select Contacts.  
Navigation key: Scrolls through menus and  
options. You can access the following  
shortcuts from the home screen.  
Press means to press a phone key. For  
example, “Press the Send key to make a  
phone call” tells you to physically press the  
Send key on your phone.  
Scroll means to use the Navigation key to move  
through a list on the display. For example, “Scroll  
through your Contacts list to choose a contact”  
means to physically press the Navigation key up  
or down to scroll through the list on the display.  
Scroll left launches the browser.  
Scroll right launches Voice Memo.  
Scroll up displays the Custom menu.  
Scroll down displays Recent Calls.  
OK key: Selects a menu item.  
Back key: Returns to the previous menu level.  
End key: Returns to the home screen.  
> (greater than symbol) tells you to select  
an option from a menu or list. For example,  
Menu > Settings” means to:  
1. Press the left soft key to select Menu.  
2. Scroll to the Settings option.  
3. Press the OK key to select Settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
7
2
Basic Functions  
This section explains basic functionality of your  
phone. For more detailed explanations of your  
phone’s features, please refer to later chapters.  
Call using a contact  
1. Select Contacts to open your Contacts list.  
2. Highlight a contact and press the Send key.  
Power up  
Call using voice commands  
To turn your phone on, press and hold the End  
You can use voice commands to call a contact  
from your voice dial list or to dial a phone  
number. For more information, see “Voice  
Commands” on page 55.  
key and wait until the phone display lights up.  
To turn your phone off, press the hold the End  
key until the phone plays a musical chime  
and turns off.  
Redial a number  
Make phone calls  
1. Press the Send key to open your call history.  
Make sure you are in an area where a signal can  
be received. Look for the signal strength icon on  
the home screen. The more bars you see in this  
symbol, the stronger the signal. If there are no  
bars, move to where the signal strength is better.  
2. Highlight a phone number or contact and  
press the Send key.  
Tip: To redial the last number called, received or  
missed, press the Send key twice.  
When the phone has been idle for a time, it  
changes to power save mode. When you see  
“Power Save” on your phone’s screen, press  
any key to return to normal operating mode.  
Answer phone calls  
When a call comes in, the phone rings, vibrates,  
or lights up. The phone number of the caller also  
appears if it is not restricted. If the number is  
stored in your contacts directory, the contact’s  
name appears. There are several ways you can  
answer a phone call.  
There are several ways you can make a  
phone call.  
Call using a number  
1. Enter a phone number.  
2. Press the Send key.  
Answer using earpiece  
Press the Send key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power up  
8
Answer using speakerphone  
Press the Speakerphone key.  
Answer using flip  
You can set the phone to answer immediately  
when you open the flip. This feature does not  
apply to incoming data calls. For more  
information, see “Open to answer” on page 46.  
End phone calls  
To end a phone call press the End key.  
Verify your phone number  
To verify your phone number, select Menu >  
Phone Info > Build Info.  
Activate voice dialing  
1. Press and hold the Send key.  
2. Follow the prompts.  
For more information, see “Voice Commands” on  
page 55.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
9
3
Call Features  
This chapter describes call features such as  
volume, holding calls, speed dialing and  
other features.  
Hold call  
The Hold Call feature allows you to place  
incoming calls on hold until you are ready to  
answer them. See “Hold calls” on page 44.  
Volume control  
There are several ways to control the volume  
of your phone.  
Speed dialing  
The Speed Dial feature allows you to assign a one-  
or two-digit shortcut to a contact. Before you can  
use speed dialing you must save a phone number  
as a contact and assign a speed dial location to it.  
See “Customize a number” on page 25.  
Adjust volume during a call  
To adjust the earpiece volume during a call,  
press the Volume Up or Volume Down key.  
To call a contact that has a speed dial location.  
Use the speakerphone  
1. Enter the one- or two-digit speed  
Your phone has a built-in speakerphone. To turn  
on the speakerphone, press the Speakerphone  
key. The speakerphone icon appears on the  
home screen when the speakerphone is on. To  
turn off the speakerphone, press the  
dial location.  
2. Press the Send key.  
1-Touch dialing  
The 1-Touch Dialing feature is the fastest way to  
speed dial a contact that has a speed dial location.  
See “1-Touch dialing” on page 44.  
Speakerphone key again.  
Note: If you press the Speakerphone key during  
an incoming call, you will answer the call.  
Silence an incoming call  
To silence the phone without answering the call  
press a Volume key or select Ignore.  
To silence the phone and answer the call,  
press a Volume key or select Silence, then  
press the Send key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Volume control  
10  
Set voicemail alert  
Voicemail  
You can set the phone to beep or vibrate every five  
minutes to remind you that you have voicemail.  
For more information, see “Alerts” on page 22.  
Configure your voicemail  
Before your phone can receive voicemail  
messages, you must set up a password and record  
a personal greeting with your service provider.  
Roaming calls  
Set roaming alert  
You can set phone to alert you when you roam  
outside of your home service area. See “Roaming  
service alert” on page 52.  
When you have set up your voicemail, all  
unanswered calls to your phone are automatically  
transferred to voicemail, even if your phone is in  
use or turned off.  
1. Press and hold the 1 key.  
2. Follow the system prompts to create a  
Set roam ringer  
password and record a greeting.  
You can set a ringer to indicate when an incoming  
call will be subject to roaming charges. See  
“Roam ringer” on page 48.  
Check your voicemail  
When a voice message is received, your screen  
displays a notification along with a voicemail  
message icon at the top of your screen. The  
symbol flashes if the message is urgent. If you  
see a notification:  
Set call guard  
You can set the phone to warn you before you  
answer or place a call while roaming. See “Roam  
call alert” on page 53.  
1. Select Call, which initiates a call to your  
voicemail number.  
Emergency services  
Call emergency service  
2. Follow the system prompts to retrieve  
the message.  
You can call an emergency code, even if your  
phone is locked or your account is restricted.  
When you call, your phone enters Emergency  
mode. This enables the emergency service  
exclusive access to your phone to call you back, if  
necessary. To make or receive regular calls after  
dialing the code, you must exit this mode.  
Note: To clear the screen without checking  
messages, select Ignore.  
If you see only the voicemail message icon:  
1. Press and hold the 1 key.  
2. Follow the system prompts to retrieve  
the message.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
11  
To place dial an emergency code:  
1. Enter your 3-digit emergency code.  
2. Press the Send key.  
Note: Regardless of your 3-digit emergency code  
(911, 111, 999, 000, etc.), your phone operates  
as described.  
Exit emergency services  
When you have completed the emergency call:  
1. Select Exit.  
2. Select Exit again to confirm your choice.  
Note: To determine who has access to your  
location, see “Location” on page 52.  
Airplane mode  
While in an airplane, you can set your phone to  
Airplane mode where your phone does not emit  
RF signals. See “Airplane mode” on page 43.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Airplane mode  
4
Text Entry  
You can enter letters, numbers, and symbols in  
contacts, text messages, and your banner.  
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you’re in numbers only mode.  
When entering a name for a contact, you’re in  
normal alpha mode.  
Text entry modes  
The current text entry mode (and capitalization  
setting, when applicable) are indicated by icons.  
Enter numbers  
The text entry screen has the following features:  
To enter a number while in numbers only  
1. Characters  
remaining that  
you can type.  
mode, press a number key once.  
To enter a number while in normal alpha or  
Rapid mode, press and hold a number key  
until the number appears on the screen.  
Allowed length of  
messages can  
vary depending  
on your service.  
Enter words letter by letter  
1. Press a key once for the first letter, twice for  
the second letter, and so on. If your phone is  
set to Spanish, accented letters are available.  
2. Text entry fields.  
3. Current capitalization setting.  
4. Current text entry mode.  
There are five text entry modes:  
2. Wait for the cursor to move right and enter  
the next letter.  
Note: To enter a space, press # Space key.  
ABC (case change)  
123 (numbers only)  
Abc (normal alpha)  
Rapid  
Enter words quickly  
Add Symbol  
When you press a series of keys using Rapid  
mode, your phone checks its dictionary of  
common words and guesses at the word you are  
trying to spell.  
1. For each letter of the word you want, press  
the key once. For example, to enter the word  
“any” press the 2 > 6 > 9 keys.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
13  
2. If the word doesn’t match what you  
want, press 0 Next key to look at other  
word matches.  
Change modes  
Sometimes you need to change modes. For  
example, to enter numbers in an email address  
while in normal alpha mode, you must change to  
numbers only mode, enter the numbers, and then  
change back to normal alpha mode to complete  
the address.  
3. When you see the word you want, press  
the # Space key.  
Enter symbols  
While entering text in normal alpha mode, you  
can enter symbols by pressing the 1 key until you  
see the symbol you want. Using this method, you  
have access to the following symbols:  
To change text entry modes, press and hold  
* Shift key until the icon for the mode you want  
appears at the top of the screen. You can also  
select Options then select a different mode.  
.
@
?
!
-
,
&
:
]
Capitalization  
To access the full set of symbols:  
You can change capitalization at any time while  
entering text. Simply press the * Shift key to  
choose upper or lower case while in normal  
alpha mode.  
1. From the text entry screen select Options >  
Add Symbol.  
2. Scroll up or down to view the list of symbols.  
3. Press the number key corresponding to the  
symbol to enter it.  
Change default text entry mode  
You can change the default text entry mode when  
creating a text message. For more information,  
see “Default text” on page 23.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Text entry modes  
14  
Text entry quick reference  
This table gives instructions for entering letters, numbers, and symbols.  
To..  
Do this...  
Enter a letter  
Use normal alpha mode and press a key until you see the letter your want. For  
more options, see “Text entry modes” on page 13.  
Enter a number  
Enter a symbol  
Use numbers only mode and press a key. For more options, see “Text entry  
modes” on page 13.  
In Abc mode, press the 1 key until you find the symbol you want. For more  
options, see “Text entry modes” on page 13.  
Enter a space  
Press the # Space key.  
Erase a character  
Press the Back key.  
Erase all characters  
Move cursor right or left  
Move cursor up or down  
Change text entry modes  
Capitalize any letter  
Lowercase any letter  
Initial caps  
Press and hold the Back key.  
Scroll left or right.  
Scroll up or down.  
Press and hold the * Shift key.  
In normal alpha mode, press the * Shift key. Choose uppercase.  
In normal alpha mode, press the * Shift key. Choose lowercase.  
In normal alpha mode, press the * Shift key. Choose sentence case.  
Select soft options on screen Press the appropriate left or right softkey.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
15  
5
Recent Calls  
Erase Record deletes the call from the  
call list.  
Call lists  
Details on the calls you made, received, or missed  
are stored in the Recent Calls list and are  
identified by the following icons:  
Note: If the phone number is classified as  
“secret,” you must enter your four-digit lock code  
to view or edit it.  
Incoming call  
Deal with a missed call  
Outgoing call  
When you have missed a call, “Missed Call”  
appears on your screen. You can do one of  
the following:  
Missed call (flashing)  
To clear the screen, select OK.  
To view the call details, select Calls and  
press the OK key.  
To return the call, select Calls and press  
the Send key.  
View recent calls  
1. Select Menu > Recent Calls and one of  
the following:  
All to view all calls made or received.  
Incoming to view calls answered.  
Outgoing to view calls made.  
Missed to view calls received, but  
not answered.  
Erase call lists  
You can erase your phone’s call lists.  
1. Select Menu > Recent Calls >  
Erase Call List > All, Incoming,  
Outgoing, Missed, or Data Call.  
Data to view data calls.  
2. Highlight a recent call.  
2. Select Yes.  
3. Press the Send key to call the number, select  
Details to view the call details, or select  
Options and one of the following:  
Save creates a new contact.  
Send Text Msg sends a text message to  
the number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Call lists  
Call timers  
Kilobyte counter  
Select Menu > Recent Calls > Kilobyte Counter  
to track all the data you have sent and received  
since you last reset this counter. To reset this  
counter to zero, select Options > Reset.  
View call timers  
Select Menu > Recent Calls > Call Timer and  
one of the following:  
All tracks all calls you have made and  
received. This timer cannot be reset.  
Recent tracks all calls you have made and  
received since you last reset this timer. To  
reset this timer to zero, select Reset.  
Home tracks all calls you have made and  
received in your home network since you last  
reset this timer. To reset this timer to zero,  
select Reset.  
Roam tracks all roaming calls you have made  
and received since you last reset this timer. To  
reset this timer to zero, select Reset.  
Incoming tracks all incoming calls you have  
received since you last reset this timer. To  
reset this timer to zero, select Reset.  
Outgoing tracks all incoming calls you have  
made since you last reset this timer. To reset  
this timer to zero, select Reset.  
Time your calls  
Your phone can alert with a short beep ten  
seconds before each minute passes during a call.  
For more information, see “Minute alert” on  
page 46.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
17  
6
Messaging  
This chapter describes how to send, receive, and  
erase messages from your phone. For information  
on voicemail messages, see “Voicemail” on  
page 11.  
Attach Preset Text and other extras  
During text entry, you can attach items such as  
prewritten text (Preset Text) or symbols.  
1. From the text entry screen, select Options  
Note: The features and menus described in this  
chapter may vary depending on services available  
in your area. Check with your service provider for  
details and possible usage charges.  
and one of the following:  
Insert QuickText inserts prewritten text  
from a list.  
Add Symbol inserts a symbol. Press  
the corresponding number to select  
a symbol.  
Text messages  
You can only send text messages to phones  
that are capable of receiving them or to  
email addresses.  
2. Complete your message.  
3. Select Send.  
Use text message options  
When you create a text message, you have several  
options to help you.  
Create a text message  
1. Select Menu > Messaging > New Text Msg.  
2. Enter a recipient’s phone number or  
email address:  
1. From the message entry screen, select  
Select Options > Recent List,  
Recent Calls, Contacts or Groups to  
access your stored contacts.  
Enter a new address manually.  
See “Text Entry” on page 13.  
Options and one of the following:  
Add Address allows you to add  
another recipient.  
Save Message saves the messages in your  
Drafts folder. The prevents the message  
from being deleted if you activate the  
Auto Erase feature.  
You can message up to ten recipients at  
once. Use comma or spaces to separate  
addresses. If you select stored contacts, this  
is done automatically. Scroll down to move  
to the next field when done.  
Save QuickText saves the message you  
composed as a prewritten message.  
3. Enter the message.  
4. Select Send.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Text messages  
Msg Settings > Msg Receipt alerts  
you when a recipient has received  
your message.  
Msg Settings > Set Priority labels the  
message as urgent.  
Msg Settings > Callback Number  
includes the callback number with  
the message.  
Msg Settings > Send Later schedules a  
time to send the message.  
Note: If you receive a new message while you are  
reading a message, the one you are reading will  
be replaced by the new one. The older message is  
in the Inbox.  
Message icons  
If you see the message icon, select Menu >  
Messaging > Inbox. Scroll to a message and  
select View to open it.  
View a text message  
The options available when viewing a text message  
may vary. Check with your service provider.  
Msg Settings > Validity Period sets  
a defined expiration time limit for  
a message.  
1. Select Menu > Messaging > Inbox.  
2. After setting options, select Close.  
3. Complete your message.  
4. Select Send.  
2. Scroll to a message and select View. If  
the message is long, scroll down to view  
entire message.  
3. Select Reply to create a response message or  
Retrieve a text message  
Options and one of the following:  
When a text message is received, your phone  
displays a notification and the message icon  
appears at the top of your screen. The message  
icon flashes if the message is urgent. Urgent  
messages are also marked in the Inbox.  
Erase deletes the message.  
Forward forwards the message.  
Reply with Copy replies to the message  
with a copy of the original attached.  
Save Message saves the message to the  
Saved Messages folder.  
Save as Quick Text saves the message  
text as Quick Text, which can be  
inserted into other messages.  
Graphics are not saved.  
Message notifications  
If you see a message notification, select Inbox to  
view messages. Scroll to a message and select  
View to open it. To clear a message notification,  
select Ignore.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
19  
Lock Msg / Unlock Msg protects the  
message from being accidentally deleted.  
Sender displays the sender information.  
Work with messages  
Here are some tips about messaging with  
your phone.  
Note: If a graphic is too large or incorrectly  
formatted and is not received with the message,  
an icon will appear.  
Unable to send messages  
You may not be able to send or receive messages  
if your phone’s memory is nearly full, or if digital  
service is not available at the time. To free up  
memory, erase old messages. See “Erase  
messages” on page 20.  
Erase messages  
It is a good idea to erase old messages to free up  
memory in your phone. You can erase messages  
and pages as you send or read them, erase them  
one at a time, or erase them all at once.  
Appended messages  
If you go over the character limit for a single  
message, the phone may automatically append an  
empty segment to your message to make space.  
Erase a single message  
1. Select Menu > Messaging > Inbox,  
Sent Msgs, Outbox, Saved Msgs or Drafts.  
Important: Your service provider will charge  
you for each message segment.  
2. Scroll to the message you wish to erase.  
When you start a message, the maximum  
character limit appears once you are in the  
message entry field. This number counts down as  
you enter characters, until it reaches 0.  
3. Select Options > Erase.  
4. You will see a notification. Select Yes to erase  
the message.  
Note: You can erase a scheduled message  
from the Outbox, but you cannot cancel  
delivery of the message.  
If you continue to enter text after this counter  
reaches 0, a message segment may be appended.  
When you reach the message size limit, you are  
prompted to edit the message or alerted that the  
message is being appended.  
Erase all messages  
1. Select Menu > Messaging > Erase Msg >  
Inbox, Outbox, Sent Msgs, Saved Msgs,  
Drafts or All. To erase messages from all  
folders, select All.  
Note: Not available on all phones. Check with  
your service provider.  
2. You will see a notification. Select Yes to  
erase the messages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Erase messages  
Incoming calls while creating  
messages  
If you receive a call while composing a message,  
you will receive a notification. You can do  
the following:  
The scheduled message will be sent at  
the scheduled time. You cannot cancel  
delivery of the message.  
The message was sent. You cannot  
cancel delivery of the message.  
Select Ignore to not answer the call. You will  
return to the message screen.  
The message has been received.  
Press the Send key to answer the call. The  
message is saved to the Drafts folder.  
The message has been sent to more  
than one recipient.  
Complete messages in Drafts folder  
To continue composing a message in the  
Drafts folder:  
View failed or pending messages  
Failed or pending messages are stored in your  
Outbox. To view messages in the Outbox, select  
Menu > Messaging > Outbox.  
1. Select Menu > Messaging > Drafts.  
2. Select the message you wish to complete.  
3. Select Edit.  
Your list of failed or pending messages will  
appear with the following symbols.  
4. Complete your message.  
5. Select Send.  
The message is pending and will be  
sent when possible. You can cancel  
delivery of the message.  
View sent messages  
To view messages in the Sent Messages folder,  
select Menu > Messaging > Sent Msgs.  
The message cannot be sent because  
service is not available. An alert  
appears on your phone if the message  
cannot be sent.  
Your list of sent messages will appear with the  
following symbols.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
21  
Edit Quick Text  
Message settings  
Your phone comes with prewritten (Quick Text)  
messages, such as “Please call me,” which you  
can insert into the body of a text message. You  
can edit these messages or create new ones. Your  
phone stores up to 40 Preset Text messages, with  
up to 100 characters per message.  
Message settings configure your phone for voice,  
text, multimedia messages.  
Alerts  
Choose your alerts for voicemail, pages,  
or messages.  
1. Select Menu > Messaging > Msg Settings >  
Edit Quick Text and do one of the following:  
1. Select Menu > Messaging > Msg Settings >  
Alerts > Msg Alert, Page Alert, or  
Voice Alert.  
Scroll to a Preset Text message and  
select Edit.  
2. Select an alert.  
Select New Msg to create a new Preset  
Text message.  
Note: If you select an alert with an & Remind, the  
phone notifies you once when a new message is  
received and then notify you again every five  
minutes. To stop a reminder alert, select Ignore.  
2. Enter or edit the text.  
3. Select Save.  
Note: You can also save a message you have  
written or received as Preset Text.  
Signature  
The signature you create is included at the end of  
all outgoing messages and is counted as  
characters in your messages; however, it does not  
appear in the message creation screen.  
Callback number  
Set a callback number to let recipients know a  
number where they can call you back.  
1. Enter number in the text field.  
1. Select Menu > Messaging >  
2. Select OK to save the number.  
Msg Settings > Signature.  
2. Enter your signature in the text field.  
Save to sent  
You can save your outgoing messages.  
3. Select OK to save the signature.  
Note: The characters in the signature  
are included in the total character count of  
the message.  
Select Menu > Messaging > Msg Settings >  
Save to Sent and one of the following:  
Disabled does not save outgoing messages.  
Enabled saves all outgoing messages to the  
Sent folder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Message settings  
22  
Auto-erase  
Voicemail number  
You can set your phone to erase message  
automatically when memory is needed for  
incoming messages.  
Set the number your phone calls to  
retrieve voicemail. Often your voicemail  
number is automatically programmed by  
your service provider.  
Select Menu > Messaging > Msg Settings >  
Auto-Erase and one of the following:  
1. Select Menu > Messaging > Msg Settings >  
Voicemail Number.  
Disabled erases no messages.  
Inbox Msgs erases old messages in your  
Inbox when memory is needed.  
2. Select Edit.  
3. Enter the voicemail number. Use Options >  
Sent Msgs erases old messages in your Sent  
folder when memory is needed.  
Both erases old messages in both your Inbox  
and Sent folder when memory is needed.  
Time Pause or Hard Pause to enter pauses.  
4. Select Save.  
Erase recent list  
Clears recent list of message recipients from  
your phone. Select Menu > Messaging >  
Msg Settings > Erase Recent List > Yes.  
Default text  
You can change the entry mode entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
Message groups  
Select Menu > Messaging > Msg Settings >  
Default Text and one of the following:  
You can create groups for messaging. Select  
Menu > Messaging > Message Groups to access  
your groups. For more information, see “Contact  
groups” on page 28.  
Normal Alpha enters text letter by letter.  
Rapid mode enters text with word  
recognition.  
Text message receipts  
Request a notification when a recipient has  
received a text or multimedia message.  
Select Menu > Messaging > Msg Settings >  
Text Msg Receipt and one of the following:  
Don’t Request to not request a notification.  
Request to request a notification.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
23  
7
Contacts  
Use your phone’s contacts directory to store  
information about a person or company. Each  
contact entry can have up to six phone numbers,  
two email addresses, two Web addresses, two  
street addresses, and a space for notes.  
Add contacts  
Add contact from home screen  
To add a contact to your contacts directory:  
1. From the home screen, enter a phone  
number to save (include the area code).  
2. Select Save > Save New Contact.  
3. Enter a name for the contact. For more  
information, see “Text Entry” on page 13.  
4. Enter additional phone numbers, email  
addresses, Web addresses and note, if  
needed. Scroll up or down to move through  
the contact fields.  
View contacts directory  
To view existing contacts in your phone, select  
Menu > Contacts > View All. Your contacts  
directory is listed alphabetically.  
Tip: You can also select Contacts from the home  
screen to view the directory.  
Highlight a contact and do one of the following:  
5. When you are done entering information,  
select Save.  
Press the Send key to call the  
highlighted contact.  
Press the OK key to view the highlighted  
contact’s details.  
Select New to add a new contact.  
Select Options and choose one of  
the following:  
Add contact from contacts menu  
To add a contact to your contacts directory:  
1. Select Menu > Contacts > Add New.  
2. Enter a name for the contact. When you  
are done scroll down to the next field.  
For more information, see “Text Entry” on  
page 13.  
3. Enter a primary number for the contact.  
4. Enter additional phone numbers, email  
addresses, Web addresses and note, if  
needed. Scroll up or down to move through  
the contact fields.  
Call the contact.  
Send Text Msg sends a text message.  
View Contact views contact details.  
Edit Contact edits the contact.  
Erase Contact deletes the contact.  
Send as vCard sends contact as a vCard.  
Send All sends all contacts to a Bluetooth  
device or a connected printer.  
Contacts Menu accesses the  
contact menu.  
5. When you are done entering information,  
select Save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
View contacts directory  
Add code or extension  
Customize a name  
When you save the phone number of an  
automated service, you may include a pause to  
stop dialing. For example, a pause where you  
would wait to dial an extension.  
To customize the name of an existing contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, scroll to the  
contact name.  
1. From the home screen, enter a  
phone number.  
4. Select Options and one of the following:  
2. Select Options and a type of pause:  
Ringer assigns a specific ringer to  
the contact.  
Msg Tone assigns a specific message  
tone to the contact.  
Picture assigns a specific picture to  
the contact.  
Erase Contact deletes the contact. This  
will erase the entire contact.  
Send as vCard sends the contact as  
a vCard.  
Time Pause causes the phone to stop  
dialing for two seconds.  
Hard Pause causes the phone to stop  
dialing until you select Release while  
making the call.  
3. Enter the remaining numbers and  
select Save > Save New Contact.  
4. Complete the contact and select Save.  
Customize contacts  
Customize a number  
To customize the number of an existing contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, scroll  
to a number.  
Edit contact details  
To edit details of an existing contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, select Edit.  
4. Select Options and one of the following:  
Call the contact.  
4. Edit or add phone numbers, email  
addresses, Web addresses and notes.  
Scroll up or down to move through the  
contact fields.  
Send Text Msg sends a text message.  
Prepend displays the contact details  
screen for you to change the number  
(adding an area code) or other data  
of the contact.  
5. When you are done entering information,  
select Save.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
25  
Add Speed Dial adds the number to your  
speed dial list.  
View Number displays the number.  
Erase Number deletes number from  
the contact.  
Secret / Not Secret makes the  
number secret. It will not appear on  
the screen until the lock code is  
entered. Secret numbers can be  
called without a lock code.  
Primary Number makes this number the  
primary number for the contact.  
Send as vCard sends the contact as  
a vCard.  
Erase Address deletes email address  
from the contact.  
Secret / Not Secret makes the email  
address secret. It will not appear on the  
screen until the lock code is entered.  
Send as vCard sends the contact as  
a vCard.  
Customize a Web address  
To customize the Web address of an  
existing contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, scroll to a  
Add To Group adds the number to the  
business, personal or custom group.  
Web address.  
4. Select Options and one of the following:  
Launch Web launches the Web browser  
and goes to Web address.  
View Web displays the Web address.  
Erase Web deletes Web address from  
the contact.  
Customize an email address  
To customize the email address of an  
existing contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
Send as vCard sends the contact as  
a vCard.  
3. At the contact details screen, scroll to a  
contact email address.  
Customize a street address  
4. Select Options and one of the following:  
To customize the street address of an  
existing contact.  
Send Text Msg sends a text message.  
View Address displays the  
1. Select Contacts.  
email address.  
Add To Group adds the email address to  
the business, personal or custom group.  
2. At the contacts directory, select a contact.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customize contacts  
26  
3. At the contact details screen, scroll to a  
4. Select Options > Ringer > Assign Ringer  
and a ringer from the list. Scroll to play  
the ringers.  
street address.  
4. Select Options and one of the following:  
View Address displays the  
street address.  
Erase Address deletes street address  
from the contact.  
Send as vCard sends the contact as  
a vCard.  
Assign picture to a contact  
To assign a picture to a contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, scroll to the  
contact name.  
Customize a note  
4. Select Options > Picture >  
Assign Picture > Saved Images or  
Caller IDs.  
To customize the note of an existing contact.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, scroll to a note.  
4. Select Options and one of the following:  
5. Scroll to an image and select Assign.  
Assign number type  
View Note displays the note.  
Erase Note deletes the note from  
the contact.  
When you assign a number type, an icon is placed  
in front of the contact number to specify the type  
of number it is.  
Secret / Not Secret makes the note  
secret. It will not appear on the screen  
until the lock code is entered.  
Send as vCard sends the contact as  
a vCard.  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
3. At the contact details screen, select Edit.  
4. Press down twice to scroll to the number  
type dropdown and press the OK key.  
Assign ringer to a contact  
To assign a ringer to a contact.  
1. Select Contacts.  
5. Select General, Work, Home, Mobile,  
Pager or Fax. The appropriate icon will  
appear next to the number in your  
phone lists.  
2. At the contacts directory, select a contact.  
6. Select Save.  
3. At the contact details screen, scroll to the  
contact name.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
27  
Send a vCard  
Use a group  
To send contact information as a message:  
1. Select Menu > Contacts > Groups.  
2. At the groups list, scroll to a group.  
3. Select Options and one of the following:  
1. Select Contacts.  
2. At the contacts directory, select a contact.  
View displays the group details.  
Edit adds or removes members.  
Erase deletes the group.  
Send Text Msg sends a text message.  
Send as vCard sends the group as  
a vCard.  
3. Select Options > Send as vCard and one of  
the following:  
via Bluetooth  
To Printer  
4. Complete the appropriate task to send  
contact information.  
Create Msg Group creates a  
message group  
Contact groups  
You can assign your contacts to groups.  
Your phone comes with two default groups,  
Business and Personal. You can also create  
your own groups.  
Customize a group  
1. Select Menu > Contacts > Groups.  
2. At the groups list, select a group.  
3. Select Options and one of the following:  
Create a group  
1. Select Menu > Contacts > Groups.  
Mark None unchecks any checked  
contacts in the group.  
2. Select New.  
Ringer assigns a ringer to the group.  
Msg Tone assigns a message tone to  
the group.  
Picture assigns a picture to the group.  
Erase deletes the group.  
3. Enter a name for the group, then select Next.  
4. Select contacts from the list provided. A  
check mark appears next to each selection  
you make. You can also remove checkmarks.  
5. When you have chosen your contacts,  
Edit edits the group.  
select Done.  
Your new group appears the next time you view  
your groups.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contact groups  
28  
Voice search  
Search contacts  
You can use voice commands to find a contact in  
your voice dial list. For more information, see  
“Find contacts” on page 57.  
To find a phone number or contact, you can  
search the contacts directory, check the Frequent  
List, or use Fast Find.  
Contacts directory  
To search your contacts directory, select Menu >  
Contacts and one of the following:  
Delete all contacts  
You can delete all your contacts.  
Select Menu > Contacts > Erase Contacts  
and one of the following:  
View All lists the entire contacts directory.  
Groups lists existing groups.  
Speed Dial List or Voice Dial List shows  
contacts on the specified list.  
Contacts Only deletes all contacts from  
the phone.  
Groups Only deletes groups you have  
created from the phone. This does not  
delete the contacts.  
You can also use the Contacts shortcut from  
the home screen to view the contacts directory.  
To quickly get down the list, enter the first letter  
of the contact. You will skip to that letter of  
the alphabet.  
Erase All deletes both contacts and groups  
from the phone.  
Note: Deleted information can not be recovered.  
Frequent list  
Contacts count  
With Frequent List enabled, you can see 15 of  
your most frequently called contacts. For more  
information, see “Frequent list” on page 45  
Check how many contacts you have stored.  
Select Menu > Contacts > Contacts Count.  
Fast find  
With Fast Find enabled, you can press one or two  
keys to view close matches of the number. For  
more information, see “Fast find” on page 45.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
29  
8
Browser  
You can use your phone to browse the Internet if  
you have obtained phone Internet services from  
your service provider and if over-the-air Internet  
access is available in your area.  
5. When you have finished using the browser,  
press the End key to exit.  
Use browser options  
You can configure your browser.  
Note: You cannot receive incoming calls while  
you are using the browser.  
During an active browser session, select Options  
and one of the following:  
Launch browser  
Display Mode selects how the Web page is  
display. Normal Screen configures the  
content to fit on the screen. Wide Screen does  
not fit the content to the screen.  
1. Select Menu > Browser. A message  
about airtime fees appears every time you  
start the browser. For more information  
about how airtime is charged, contact  
your service provider.  
Add to Bookmarks saves the current page as  
a bookmark for easy access.  
Bookmarks opens a list of your  
2. Select OK to continue. If this is the first time  
you have connected to the Internet, a  
message informs you that security is not yet  
enabled for your browser.  
saved bookmarks.  
Save Items on this Page allows you to save  
content from the current page to your phone.  
Search opens the browser search page.  
Send URL sends the URL of the current page  
with a text message.  
3. Select Yes to enable security. When you are  
connected, a browser home page appears. It  
has a list of bookmarks and some browser  
menu options at the bottom of the screen.  
The lock icon appears in a secure session.  
An underline and an arrow indicate that  
there is more text. Scroll down to view more  
text. Press the Back key to return to the  
previous screen.  
Go to URL... allows you to enter the URL of a  
new page and go there.  
History displays the pages you have visited.  
Refresh reloads the current page.  
Quit exits the browser.  
More... gives you options for changing how  
information is displayed.  
4. To choose a site, scroll to the link and Press  
the OK key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Launch browser  
30  
Show URL displays the entire URL of the  
current page.  
Restart Browser relaunches the browser.  
Clear IDs and Passwords clears  
the browser cache of user names  
and passwords.  
Certificates... displays certificates used in  
the current browser session.  
Preferences allows you to change the  
home page and other browser settings.  
About displays information about your  
browser session.  
Check browser alerts  
Alerts received from a Web site are sent to  
your Browser Alerts folder. To check them,  
do the following:  
1. Select Menu > Messaging >  
Browser Alerts. This action launches  
the browser inbox.  
2. Select OK to accept browser fees.  
3. Select an alert and follow the prompts.  
Set Web alert  
You can set a prompt to confirm the start or  
exit of the browser. For more information, see  
“Web alert” on page 53.  
Search for a Web site  
How you search for a Web site depends on your  
service provider. For more information, contact  
your service provider.  
Use a bookmark  
1. Select Menu > Browser.  
2. Select OK to accept browser fees.  
3. From your Web home page, select  
Options > Bookmarks. A list of  
bookmarks appears.  
4. Select a bookmark.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
31  
9
Downloads  
Your Kyocera phone has the added ability  
to download and manage applications  
through BREW.  
Download an application  
1. Select Menu > Downloads >  
MobileShop > Catalog.  
BREW brings you the full range of applications  
and services you have come to expect from the  
Internet: Email and instant messaging, real-time  
navigation services, group chat, games, relevant  
news, and much more.  
When a connection is made, a list of  
application types appears.  
2. Select an application type. A list of  
applications appears. Long titles scroll left as  
you highlight them.  
For more information about BREW  
capabilities and application pricing, contact  
your service provider.  
3. Select an application. A list of usages  
appears. There may be one or more  
usages available. Prices are specified  
for each usage.  
How does BREW work?  
4. Select a usage for the application. You are  
You connect to the server, download applications,  
and then manage them as you like. When you  
choose an application, you have the option of  
choosing a demo, various limited use options, or  
the full version—all varying in price. If you  
choose a demo, BREW lets you know when it has  
expired. If you choose a priced version, the  
amount is added to your phone bill. BREW also  
lets you know if you’re running out of memory. At  
that point, you can either disable an application  
or remove it completely.  
prompted to confirm your purchase.  
5. Select Yes to confirm. The application  
downloads to your phone. Download  
times may vary.  
To open the application now, select Yes. If you  
select No, you return to the Games & Apps menu,  
where you see a link to your new application.  
Note: Your connection to the application server  
automatically ends after 30 seconds, unless you  
connect again to download more apps. If you  
want to end the connection manually, press the  
End key on your phone.  
Once applications are loaded, you can update to  
newer versions as they become available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How does BREW work?  
32  
Open an application  
Disable an application  
Downloaded applications are stored under  
the Games & Apps menu. Each application  
comes with its own unique icon, to help you  
identify it easily.  
If you are running out of memory and would like  
to download more applications, but do not want  
to completely remove those you have paid for, you  
can simply disable them. This means you have to  
re-download an application in order to use it  
again, but don’t have to pay for it again.  
From the home screen, select Menu >  
Downloads and the application.  
1. Select Menu > Downloads > Settings >  
Note: The Games & Apps icon always  
remains at the top of this menu.  
Manage Apps.  
Downloaded applications are listed after.  
2. Select an application.  
3. Select Lock App. At the prompt, select Yes  
View application details  
to confirm.  
You can get information about the size of  
an application and how many uses it has left  
before it runs out.  
Note: The application is listed in the Games &  
Apps menu. The icon looks like an empty box.  
1. Select Menu > Downloads > Settings >  
Check available memory  
The amount of memory depends on the number  
of applications you download.  
Manage Apps.  
2. Select an application to view its details.  
Select Menu > Downloads > Settings >  
Manage Apps > System Info.  
Remove an application  
If you remove an application, it is removed  
completely from your phone. If you want to use it  
again, you must pay for it again. If you want to free  
up space on your phone, we recommend you  
disable the application.  
The amount of memory left is shown.  
1. Select Menu > Downloads > Settings >  
Manage Apps.  
2. Select an application.  
3. Select Remove. At the prompt, select Yes  
to confirm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
33  
10 Tools  
Your phone comes with tools and games. Some of  
the games or tools described here may not be  
available on your phone. If you receive and  
incoming call while you are playing a game, the  
game is paused and exited. You can return to play  
once the call alert ends. Games do not remain  
paused if the phone is turned off or loses power.  
3. Select Play to play the memo or select  
Options and one of the following:  
Send creates a text message with the  
memo attached.  
Erase deletes the memo.  
Assign assigns the memo as the  
default ringer, contact ringer,  
contact message tone, group ringer,  
or group message tone.  
Voice memo  
The Voice Memo tool allows you to record and  
play back audio memos.  
Lock / Unlock prevents accidental  
erasing of the memo.  
Rename renames the memo.  
Details displays the details of the file.  
Erase All deletes all memos stored.  
Record voice memos  
To record new voice memos, do the following:  
1. Select Menu > Tools > Voice Memo >  
Record New.  
Scheduler  
2. Say your voice memo. Select Stop when you  
The Scheduler allows you to schedule events and  
set reminder alerts.  
are done.  
3. Select Save to save your memo.  
Note: This feature only works if digital  
If an incoming call is received while you are  
recording a memo, the memo is saved and the  
incoming call screen appears.  
service is available.  
Create an event  
1. Select Menu > Tools > Scheduler >  
Review voice memos  
To play and use voice memos, do the following:  
Add New Event.  
2. Enter a name. Scroll down to move to the  
1. Select Menu > Tools > Voice Memo >  
next field when done.  
Recorded Memos.  
3. Choose an event type. Press the OK key and  
2. At the file list, highlight a file.  
select a choice from the list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Voice memo  
34  
4. Modify the date, if needed. Press the OK key  
10. Enable silent mode, if needed. Press the OK  
key and select Off to leave on normal sounds  
or During Event to place phone in silent  
mode during the duration of the event.  
to change the date.  
Scroll left or right to move between  
month, day and year fields.  
Scroll up or down to change month, day  
and year.  
11. Make the event recurring, if need. Press the  
OK key and select a choice from the list.  
Press the OK key to save date and move to  
12. Select Save to save the event.  
the next field.  
View events  
You can view the events saved to the scheduler.  
5. Modify the time, if needed. Press the OK key  
to change the time.  
Scroll left or right to move between hour,  
minute and AM/PM fields.  
Scroll up or down to change hour,  
minute and AM/PM.  
View by date  
1. Select Menu > Tools > Scheduler and one  
of the following:  
View Month displays the current month.  
Days with events are highlighted. Scroll  
through the calendar. Press the OK key  
to select a date.  
Press the OK key to save time and move to  
the next field.  
6. Modify the duration of event, if needed. Press  
the OK key to change the duration.  
View Day displays the current date.  
Scroll right or left to move to  
another date.  
Go to Date chooses a specific date.  
Scroll left or right to move between  
month, day and year fields. Scroll up or  
down to change month, day and year.  
Press the OK key to select the date.  
Scroll left or right to move between hour  
and minute fields.  
Scroll up or down to change hour  
and minute.  
Press the OK key to save duration and move  
to the next field.  
7. Choose a priority. Press the OK key and  
2. At the day view, do one of the following:  
select a choice from the list.  
Select an existing event to view the  
event detail.  
Scroll to a time and select Add New to  
create a new event.  
8. Choose a reminder time. Press the OK key  
and select a choice from the list.  
9. Choose a reminder sound. Press the OK key  
and select a choice from the list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
35  
Select Options > Go to Today to go  
the current date.  
Select Options > Go to Date to go a  
specific date.  
Select Options > Erase Today’s Events  
to delete all events for that date.  
Erase deletes the event.  
Send creates a message containing the event.  
Copy creates an event with the existing event  
information.  
Scheduler settings  
You can change the default settings of  
your scheduler.  
View by list  
1. Select Menu > Tools > Scheduler >  
Select Menu > Tools > Scheduler > Settings  
and one the following:  
View All Events.  
2. At the event list, select one of the following:  
Scheduler Hours changes the work day.  
Auto Erase deletes events automatically.  
Priority prioritizes new events.  
Reminder assigns reminders for new events.  
Reminder Sound assigns sound alerts for  
new event reminders.  
Scroll to an event and select View to  
display the event detail.  
Select Options > Sort by Time to sort  
events by time.  
Select Options > Sort by Type to sort  
events by type.  
Select Options > Sort by Priority to sort  
events by priority.  
Select Options > Erase All Events to  
delete all events.  
Select Options > Erase All Past Events  
to delete all events that have already  
occurred.  
Silent Mode sets phone to silent mode for  
new events.  
Alarm clock  
You can set up to four alerts with your phone’s  
three alarm clocks and one quick alarm.  
Note: The alert occurs only if the phone is on.  
Note: This feature only works if digital service  
is available.  
Modify an event  
You can modify existing events.  
Set an alarm  
1. Select Menu > Tools > Alarm Clock.  
From the event detail screen, you can select OK to  
return to the previous screen or Options and one  
the following:  
2. Scroll to one of the alarms and select Set.  
Edit edits the event.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Alarm clock  
3. Modify the time, if needed. Press the OK key  
2. Enter the amount of your bill and  
to change the time.  
select Next.  
Scroll left or right to move between hour,  
minute and AM/PM fields.  
3. Select the percentage amount to tip. The new  
bill amount is shown.  
Scroll up or down to change hour,  
minute and AM/PM.  
4. Select Done to return to menu or Split to  
split the bill.  
Press the OK key to save time and move to  
the next field.  
To split the bill enter number of guests and  
select Next. The new bill amount with splits  
is shown. Select Done to return to menu.  
4. Choose a sound. Press the OK key and select  
a choice from the list.  
Calculator  
The Calculator can perform basic  
mathematical operations.  
5. Make the alarm recurring, if needed. Press  
the OK key and select a choice from the list.  
6. Enter a note. Press the OK key.  
1. Select Menu > Tools > Calculator.  
2. Enter the first number.  
7. Select Save to set the alarm.  
When the alarm rings, select Stop to turn off the  
alarm or Snooze to silence the for 10 minutes.  
3. Select a mathematical operation:  
Scroll left to multiply  
Scroll right to divide  
Scroll up to add  
Tip: Opening the flip turns off the alarm.  
Set the quick alarm  
1. Select Menu > Tools > Alarm Clock.  
Scroll down to subtract  
2. Highlight the quick alarm and select Set.  
The chosen operation is highlighted.  
3. Choose a time. A notification shows the quick  
4. Enter the second number. Press the OK  
key to perform the operation. The result  
is shown.  
alarm is on.  
When the quick alarm rings, select Off to turn off  
the alarm or Reset to set the quick alarm again.  
5. Select Exit to return to menu or Options and  
one of the following:  
Tip calculator  
MS stores the currently displayed value in  
memory.  
The Tip Calculator helps you calculate how much  
tip to include with a bill.  
M+ adds displayed result to the value  
stored in memory.  
1. Select Menu > Tools > Tip Calculator.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
37  
MR displays currently stored value on  
the screen.  
MC clears value currently stored  
in memory.  
Stop pauses counting.  
Reset clears the stopwatch.  
Press the Back key to return to the menu.  
World clock  
The world clock lets you check times in cities  
around the world in relation to local time.  
Timer  
The Timer counts down for the specified time.  
It beeps when that amount of time has elapsed.  
Set world clock  
1. Select Menu > Tools > Timer > Set.  
1. Select Menu > Tools > World Clock.  
2. Enter the time length.  
The world clock menu is displayed. Your  
local time and date is on the first line,  
followed by your selected world city and that  
city’s time and date.  
Scroll left or right to move between  
hours, minutes and seconds fields.  
Scroll up or down to change hours,  
minutes and seconds.  
2. When you first access World Clock, scroll left  
3. If needed, select Sound and one of the  
or right to select a time zone.  
sounds to change the sound.  
The world clock menu is displayed again, with the  
new time zone.  
4. To work the timer, select the  
following options:  
Start begins the countdown.  
Stop pauses the countdown.  
Reset clears the timer.  
Search world clock  
From the world clock menu, you can search by  
city or country.  
When the countdown is complete select Off to  
silence the alarm.  
1. Select Menu > Tools > World Clock >  
Options > Search City or Search Country.  
2. In the search field, enter letter(s) to search  
Stopwatch  
by. Results are listed as you type.  
The Stopwatch counts time for you.  
3. Select a city or country from the list.  
1. Select Menu > Tools > Stopwatch.  
2. To work the stopwatch, select the  
following options:  
Start begins counting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Timer  
11 Media Gallery  
Your phone stores images, sounds and videos and  
can display those files on the phone’s screen.  
3. Depending on which list you are in, the  
displayed options change:  
If you are viewing Saved Images, select  
Access folders  
To access the folders where your phone stores  
media files, select Menu > Media Gallery and  
one of the following:  
View to view the image or select Options  
and one of the following:  
- Send sends the image via Bluetooth.  
- Assign assigns the image as a Caller  
ID, wallpaper, or screensaver.  
Images contains image files that are  
preloaded, downloaded, saved or created.  
Sounds contains sound files that are  
preloaded, downloaded, saved or created.  
Delete All allows you to delete media files.  
- Details displays details of the file.  
- Erase All deletes all images stored.  
If you are viewing Wallpapers or  
Screensavers, select View to view the image  
or select Options and one of the following:  
Browse images  
- Set Default assigns the image as the  
phone’s wallpaper or screensaver.  
To browse the images folder:  
1. Select Menu > Media Gallery > Images and  
- Details displays details of the file.  
one of the following:  
- Erase All deletes all images stored.  
Saved Images displays images available.  
Wallpapers displays wallpaper available.  
Screensavers displays  
If you are viewing Caller IDs, select View  
to view the image or select Options and one  
of the following:  
screensavers available.  
- Assign assigns the image as a  
Caller ID.  
Caller IDs displays the IDs you have  
assigned to pictures and images.  
- Details displays details of the file.  
2. At the file list, scroll to an image.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
39  
- Record New records a new  
voice memo.  
Browse sounds  
To browse the Sounds folder:  
- Erase deletes the memo.  
- Assign assigns the sound as the  
default ringer, contact ringer,  
contact message tone, group ringer,  
or group message tone.  
- Lock / Unlock prevents accidental  
erasing of the memo.  
- Rename renames the sound.  
- Details displays details of the file.  
- Erase All deletes all sounds stored.  
1. Select Menu > Media Gallery > Sounds and  
one of the following:  
Saved Sounds displays sounds available.  
Ringers displays ringers available.  
Voice Memos contains voice memos you  
have made.  
2. At the file list, scroll to a file.  
3. Depending on which list you are in, the  
displayed options change:  
If you are in the Saved Sounds list, select  
Send to send the file via Bluetooth or select  
Options and one of the following:  
- Assign assigns the sound as the default  
ringer, contact ringer, contact  
Delete all files  
You can delete your unlocked media files.  
Select Menu > Media Gallery > Delete All  
and one of the following:  
message tone, group ringer, or group  
message tone.  
- Details displays details of the file.  
- Erase All deletes all sounds stored.  
Images Only deletes all images from  
the phone.  
Sounds Only deletes all sounds from  
the phone.  
Delete All deletes all media files from  
the phone.  
If you are in the Ringers menu, select  
Assign to assign the ringer as the default  
ringer, contact ringer, contact message tone,  
group ringer, or group message tone; or  
select Options and one of the following:  
- Details displays details of the file.  
Note: Deleted information can not be recovered.  
Playback tools  
When you playback voice memos, use the  
Navigation key to select the playback tools  
displayed on the screen.  
- Erase All deletes all sounds stored.  
If you are in the Voice Memos list, select  
Play to play the memo, or select Options  
and one of the following:  
- Send allows you to send the file  
via Bluetooth.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Browse sounds  
40  
12 Settings  
Menu options  
The contents of the Settings menu are as follows:  
Bluetooth  
On/Off  
My Devices  
Settings  
Display  
Voice Features  
Automatic Add  
Expert Mode  
Display Results  
Digit Lengths  
Voice Answer  
Voice Wake-Up  
Voice Training  
Network  
Data Calls  
Set Wallpaper  
Set Screensaver  
Themes  
Main Menu View  
My Banner  
Backlighting  
Brightness  
Contrast  
Privacy Alert  
Voice Privacy  
Roam/Svc Alert  
Roam Option  
Set Phone Line  
Location  
Convenience  
Airplane Mode  
Auto-Hyphen  
1-Touch Dialing  
Hold Call  
Fast Find  
Frequent List  
Minute Alert  
Web Alert  
Roam Call Alert  
Accessories  
Headset Sounds  
Auto-Answer  
TTY Device  
Time/Date Format  
Language  
Security  
Lock Phone  
Sounds  
Missed Call Alert  
Open to Answer  
Any Key Answer  
Ringers  
Ringer Mode  
Volume  
Flip Sounds  
Pwr On/Off  
Keypad  
Com Port Speed  
Hearing Aid  
Limit Calls  
ICE Numbers  
Erase Contacts  
New Lock Code  
Note: Some features are not available on all phones. Check with your service provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
41  
Pairing  
Bluetooth  
®
You must first “pair” your phone with the  
Bluetooth device to allow your phone to  
communicate with it. Refer to the instructions  
for setting up Bluetooth (below) in conjunction  
with the user guide provided with your  
Bluetooth device.  
The Bluetooth wireless technology on  
your phone enables wireless connectivity  
with accessories such as portable or  
installed hands-free car kits, headsets,  
handsets, computers, PC cards and adapters,  
PDAs, and speakers. Not available on all phones.  
For details check with your service provider. You  
must use a Bluetooth device (compatible with  
Class 2 Bluetooth wireless technology,  
1. Select Menu > Settings > Bluetooth >  
On/Off > On Visible or On Invisible.  
2. Prepare the Bluetooth device or accessory  
for pairing as described in the other device’s  
user guide.  
version 1.2) in order to use this phone wirelessly.  
Bluetooth accessories are noted with a symbol.  
3. Select Menu > Settings > Bluetooth >  
Turn Bluetooth on  
You must turn on your phone’s Bluetooth feature  
to use it with Bluetooth devices.  
My Devices > Find New.  
4. Your phone will search and detect visible  
Bluetooth devices in the vicinity.  
Select Menu > Settings > Bluetooth > On/Off  
and one of the following:  
5. At the device list, highlight a device  
and select Add.  
On Visible allows other devices to find  
your phone.  
When pairing is initiated from another  
Bluetooth device, you will be prompted to  
accept or reject the pairing.  
On Invisible hides your phone for all devices  
except those listed in your My Devices.  
Off prohibits your phone from being used  
with any Bluetooth wireless technology device.  
To prolong battery life, it is recommended to  
turn Bluetooth off when you are not using it.  
6. If necessary, enter the password provided  
in the Bluetooth device’s user guide and  
select OK.  
Your phone waits for the device’s response.  
If the password is accepted the device is  
added to My Devices.  
When you turn Bluetooth on the first time, you  
will be prompted to do a device search. You can  
immediately pair with a device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth  
42  
Delete removes the device from  
your phone if you are no longer going  
to use it.  
Services displays a description of the  
device (such as Headset, Handsfree,  
Object Push, and Serial Port).  
Security sets connection options  
(Always Ask or Always Connect).  
Using Bluetooth  
Before you can use the Bluetooth functions of  
your phone, you must set your phone to be  
ready to communicate with a device. This is  
called “connecting.”  
Connect to a device  
To connect your phone to an audio  
Bluetooth device:  
1. Select Menu > Settings > Bluetooth >  
My Devices.  
2. At the device list, highlight a device and  
select Connect.  
Bluetooth settings  
You have settings for how your phone interacts  
with Bluetooth devices. Select Menu > Settings >  
Bluetooth > Settings and one of the following:  
My Name changes the name of your phone to  
identify to other devices it is paired with.  
Visible Duration sets the time your phone  
remains visible to other devices.  
Services shows the list of the Bluetooth  
protocol supported by your phone.  
OBEX Authentication enables or disables  
OBEX authentication.  
A notification appears confirming the connection.  
You can now use the device with your phone.  
Disconnect from a device  
To disconnect your phone from an audio  
Bluetooth device:  
1. Select Menu > Settings > Bluetooth >  
My Devices.  
2. At the device list, highlight a device and  
select Disconnect.  
Convenience  
Your phone has several settings that may make  
your phone more convenient to use.  
Device list options  
You can change or review the information about  
each device you paired with your phone.  
1. Select Menu > Settings > Bluetooth >  
My Devices.  
2. At the device list, highlight a device, select  
Options and one of the following:  
Airplane mode  
While in an airplane, it is normally required that  
you turn off your mobile phone because it emits  
RF signals that interfere with air traffic control. In  
Airplane mode, however, your phone will not emit  
RF signals.  
Rename renames the device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
43  
You cannot make or receive calls, send text  
messages, use the browser, or Bluetooth, but you  
can play games, use the Scheduler, set the clock,  
and make emergency calls to designated  
emergency numbers. Please check with  
uniformed personnel before operating your  
phone in Airplane mode. To set your phone to  
Airplane mode, select Menu > Settings >  
Convenience > Airplane Mode > Enabled >  
OK. If you turn on Airplane mode, you can also  
set the time and date manually.  
Press the OK key to save time and move to  
the next field.  
4. Select Done.  
Auto-hyphen  
Auto-hyphenation, when enabled, automatically  
inserts hyphens into your phone numbers to be  
consistent with the U.S. dialing plan. For example,  
1-222-333-4444. To turn on, select Menu >  
Settings > My Phone > Auto-Hyphen >  
Enabled.  
Set date and time  
1-Touch dialing  
While in Airplane Mode, your phone does not  
keep time automatically. You can set the time  
and date manually.  
1. Select Menu > Settings > Convenience >  
Set Time/Date.  
The 1-Touch Dialing feature is the fastest way  
to call a speed dial location. To call a contact  
with speed dial, press and hold the speed  
dialing location.  
Note: If it is a two-digit location, press the first  
digit briefly, then press and hold the second digit.  
2. At the Date field, modify the date. Press the  
OK key to change the date.  
To use 1-Touch dialing, you must enable 1-Touch  
dialing on your phone and have a speed dial  
location assigned to a contact. To enable 1-touch  
dialing, select Menu > Settings > My Phone >  
1-Touch Dialing > Enabled.  
Scroll left or right to move between  
month, day and year fields.  
Scroll up or down to change month, day  
and year.  
Press the OK key to save date and move to  
the next field.  
Hold calls  
3. At the Time field, modify the time. Press the  
OK key to change the time.  
The Hold Call feature allows you to place  
incoming calls on hold until you are ready to  
answer them.  
Scroll left or right to move between hour,  
minute and AM/PM fields.  
Note: The Hold Call feature will not work if the  
Open to Answer feature is enabled. See “Open to  
answer” on page 46.  
Scroll up or down to change hour,  
minute and AM/PM.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenience  
44  
Enable hold call feature  
Change the hold message  
1. Select Menu > Settings > Convenience >  
1. Select Menu > Settings > Convenience >  
Hold Call > Enabled.  
Hold Call > Re-Record Msg.  
If you have not recorded a hold message, you  
will be prompted to record one, such as  
“Please hold. I’ll answer in a minute.”  
2. Select Record to record the message,  
as prompted.  
3. Select OK to record the message a second  
2. Select Record to record the message,  
time, as prompted.  
as prompted.  
The new hold message is now activated.  
3. Select OK to record the message a second  
Fast find  
time, as prompted.  
With Fast Find enabled, you can press one or two  
keys to view close matches of the number you are  
looking for.  
The hold message is now activated. The next time  
a call comes in, you will have the option of  
placing it on hold.  
1. From the home screen, press the keys  
corresponding to the letters of the name you  
want to find. A matching contact or speed  
dial entry appears.  
Place a call on hold  
You can place a call on hold once you have  
enabled this feature.  
Note: If you are already on a call and you receive  
another call, you cannot place the incoming call  
on hold. It will go to voicemail.  
2. Scroll to the contact you want and press the  
Send key to call the number.  
To enable Fast Find, select Menu > Settings >  
Convenience > Fast Find > Enabled.  
When a call comes in, do the following:  
1. Select Options > Hold Call. The caller will  
be placed on hold and will hear your  
recorded hold message.  
Frequent list  
From the home screen, select Contacts. The last  
15 of your most frequently called contacts appear  
when the Frequent List is enabled. Scroll past the  
double line to view the entire contacts directory.  
2. Select Answer to speak to the caller on hold  
or End Call to hang up without speaking.  
To enable Frequent List, select Menu >  
Settings > Convenience > Frequent List >  
Enabled.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
45  
Minute alert  
Display  
Your phone can alert with a short beep ten  
seconds before each minute passes during a call.  
Select Menu > Settings > Convenience >  
Minute Alert > Enabled.  
Wallpaper  
You can select a wallpaper for your phone’s  
home screen.Select Menu > Settings >  
Display > Set Wallpaper and one of the  
following options:  
Missed call alert  
Saved Images selects from saved images.  
Wallpapers selects a preloaded wallpaper.  
None turns off wallpaper.  
Choose your alert missed calls.  
1. Select Menu > Messaging > Msg Settings >  
Alerts > Missed Call Alert.  
2. Select an alert.  
Screensaver  
Note: If you select an alert with an & Remind, the  
phone notifies you once when a new message is  
received and then notify you again every five  
minutes. To stop a reminder alert, select Ignore.  
Screensavers appear on the home screen when  
the flip is open or closed. A screensaver activates  
10 seconds after the last keypress. Incoming calls  
and alerts override the screensavers.  
Select Menu > Settings > Display >  
Set Screensaver and one of the following options:  
Open to answer  
Open to answer allows you to answer a call by  
opening the flip. Select Menu > Settings >  
Convenience > Open to Answer > Enabled.  
Saved Images selects from saved images.  
Screensavers selects a preloaded  
screensaver.  
Any key answer  
None turns off screensaver.  
Set your phone to answer a call when press any  
key. Select Menu > Settings > Convenience >  
Any Key Answer > Enabled.  
Themes  
You can select a color theme for the display  
background of your phone.  
1. Select Menu > Settings > Display >  
Themes.  
2. Select a color theme. As you scroll down the  
list you will preview the themes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
Display  
7 seconds (default), 10 seconds,  
15 seconds, or 30 seconds turns  
backlighting on for the set time after  
your last keypress.  
Always Bright leaves backlighting on  
whenever the phone is open.  
Main menu view  
Display menus in various formats. Select Menu >  
Settings > Display > Main Menu View and one  
of the following:  
Grid displays icons of each menu item, with  
its name at the bottom of the screen.  
List displays a list of each menu item.  
Brightness  
Change the brightness of the display.  
The next time you select Menu from the home  
screen, you see the menu style you selected.  
1. Select Menu > Settings > Display >  
Brightness.  
My banner  
2. Scroll to change the brightness.  
The banner is the personal label for your phone.  
It appears on the home screen above the time and  
date. To change your banner:  
3. Press the OK key to save.  
Contrast  
Change the brightness of the display.  
1. Select Menu > Settings > Display >  
My Banner.  
1. Select Menu > Settings > Display >  
2. Select Edit and press the Back key to clear  
Contrast.  
the current banner.  
2. Scroll to change the brightness.  
3. Enter your new text and select Save.  
3. Press the OK key to save.  
Backlighting  
Time and date format  
Your screen lights up while you are in a call or  
when you press a key on the keypad. The  
backlight automatically turns off when the phone  
is inactive. You can set the length of time the  
bright backlighting remains on. Select Menu >  
Settings > Display > Backlighting and one of  
the following:  
Your phone can display different time and date  
formats. Select Menu > Settings > Display >  
Time/Date Format and a format.  
Language  
Your phone can display alternative languages.  
Select Menu > Settings > Display > Language  
and a language.  
Always Dim turns backlighting off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
47  
Vibrate Only vibrates for the duration of the  
incoming call or other alerts.  
Vibe then Ring vibrates for the first 10  
seconds and then rings for the remainder of  
the incoming call alert.  
Sounds  
Your phone has several settings that control the  
sound. You can pick from a variety of ringers as  
well as control the volume.  
Lights Only lights up for the duration of the  
incoming call or other alerts.  
Ringers  
You can change the ringer for your phone. You  
can also assign ringers for different tasks.  
You can also press and hold the # Space key to go  
back forth from Vibrate Only mode to Normal  
Sounds mode.  
Ringer types  
Your phone has multiple ringers you can choose  
to use for all incoming calls.  
1. Select Menu > Settings > Sounds >  
Ringers > Ringer Type.  
2. Select a ringer. As you scroll down the list  
you will hear the ringers.  
Note: The phone will ring when it is attached to  
an external power source (such as a charger),  
even if all sounds have been silenced.  
Volume  
Control the volume of your phone’s features.  
Volume controls  
Roam ringer  
Control the volume of the phone’s ringer,  
speakerphone, earpiece and keypad.  
1. Select Menu > Settings > Sounds >  
Volume > Ringer Volume,  
Spkrphone Volume, Earpiece Volume,  
or Key Volume.  
2. Scroll right to increase the volume or left to  
decrease the volume.  
Your phone can alert you to roaming calls with a  
specific ringer. Select Menu > Settings >  
Sounds > Ringers > Roam Ringer > Enabled.  
Ringer mode  
Your phone is set to make sounds when you  
receive calls, press keys, navigate through menus,  
and receive alerts (such as new messages). You  
can silence all sounds and set the phone to vibrate  
or light up when you receive calls and alerts.  
Select Menu > Settings > Sounds >  
3. Press the OK key to save.  
Smart volume  
To automatically adjust the volume during a call,  
based on surrounding noise levels, select Menu >  
Settings > Sounds > Volume > Smart Sound >  
Enabled.  
Ringer Mode and one of the following:  
Normal Sounds rings for the incoming  
call or alert (in effect, returns phone to a  
non-silent mode).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
Sounds  
Flip sounds  
Assign specific sounds for when your phone flip  
opens or closes.  
Voice features  
Following features allow you to customize the  
voice commands.  
1. Select Menu > Settings > Sounds >  
Automatic add  
Flip Sounds > Flip Open or Flip Close.  
You can set the phone to automatically add a  
contact to your voice dial list when you create  
a new contact. Select Menu > Settings >  
Voice Features > Automatic Add > Enabled.  
2. Select a sound. As you scroll down the list  
you will hear the sounds.  
Power on/off sound  
You can set your phone to play a sound when  
powering on and off.  
Expert mode  
When expert mode is enabled, instead of  
speaking a command following the initial  
voice prompts, you can speak the command  
after you hear a tone. Select Menu > Settings >  
Voice Features > Expert Mode and one of  
the following:  
1. Select Menu > Settings > Sounds >  
Pwr On/Off Sound.  
2. Select Enabled to activate the power on/off  
sounds or Disabled to deactivate the power  
on/off sounds.  
Normal sets phone to default voice prompts.  
Expert sets phone to sound tones instead of  
voice prompts.  
Keypad  
Control the keypad tones of the phone.  
Key sound  
Display results  
To choose the sounds the keys make when  
pressed, select Menu > Settings > Sounds >  
Keypad > Key Sound > Tone, Click or Off.  
You can set the phone to display up to three  
recognition contacts when calling or searching  
for a contact with voice commands. Select  
Menu > Settings > Voice Features >  
Key length  
Display Results > Single Best or Three Best.  
To control the length of the keypad tones, select  
Menu > Settings > Sounds > Keypad >  
Key Length > Normal or Long.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
49  
Digit lengths  
Voice wake-up  
You can set the number of digits used for a phone  
number in your voice dial list.  
You can set your phone to make a call using  
a headset.  
Select Menu > Settings > Voice Features >  
Digit Lengths and one of the following:  
Enable voice wake-up  
Select Menu > Settings > Voice Features >  
Voice Wake-Up > With Accessory.  
North American allows 7, 10, and 1 +  
10 digits in a phone number.  
Permit All allows 4-14 digits in a  
phone number.  
Use voice wake-up  
To wake up the phone:  
1. Say “Wake Up” and listen for a tone.  
Voice answer  
You can set your phone to answer a call  
automatically when using a headset.  
2. Say “Wake Up” again until you hear  
two tones.  
If the phone does not recognize your Wake Up  
command, see “Voice training” on page 50.  
Enable voice answer  
Select Menu > Settings > Voice Features >  
Voice Answer > With Accessory. To use the voice  
answer feature, you must disable the Auto-Answer  
feature (see “Auto-answer” on page 51) and set  
the phone to normal sounds (see “Ringer mode”  
on page 48).  
Voice training  
If your phone is having trouble recognizing  
your voice, you can train by speaking  
number commands.  
1. Select Menu > Settings > Voice Features >  
Voice Training.  
Use voice answer  
2. Read the message and select OK.  
3. Select Train Numbers.  
When you receive an incoming call, the phone  
prompts you with a voice recording. If the caller  
is recognized as a contact entry in your phone,  
then the phone prompts “Incoming call from  
(Name), answer?” Say “Yes” or press any key  
except the End key to answer. Say “No” and press  
the End key to silence the alert. Remain silent.  
The voice alert repeats twice and the phone rings  
once, then returns to the home screen.  
4. Read the message and select OK.  
5. Follow the prompts displayed on the  
screen. Speak each number until training  
is complete.  
To untrain your phone select Menu > Settings >  
Voice Features > Voice Training > OK >  
Untrain Numbers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
Voice features  
Com port speed  
Accessories  
This section describes settings that affect  
accessories you use with your phone.  
This sets the speed of the communications port  
for data and TTY transmission. Select Menu >  
Settings > Accessories > Com Port Speed >  
19.2 kbps, 115.2 kbps, 230.4 kbps, or Other.  
Headset sounds  
When a headset is attached to your phone, the  
ringer can be played through the headset or  
phone speaker. Select Menu > Settings >  
Accessories > Headset Sounds and one of  
the following:  
Hearing aid  
You can use your phone with a T-coil hearing aid  
device. Select Menu > Settings > Accessories >  
Hearing Aid > OK > Enabled.  
Out of phone rings from the phone speaker.  
Out of headset rings from the headset.  
Note: Enable hearing aid feature only when using  
the phone with a T-coil hearing aid device.  
Auto-answer  
Network  
When a headset is attached to your phone, the  
phone can be set to answer automatically. To turn  
auto answer on, Select Menu > Settings >  
Accessories > Auto-Answer > After 5 Seconds.  
It will automatically answer after 5 seconds.  
Data calls  
Your phone may be able to receive certain data,  
depending on the system sending the information.  
You cannot receive voice calls while the phone is  
in data mode. To receive data, you must connect  
the phone to a laptop or PC and switch the phone  
from voice mode to data mode.  
TTY device  
You can connect the phone to a teletype (TTY)  
device for the hearing impaired.  
Note: Enable TTY only when using the phone with  
a TTY device.  
Note: To purchase a cable, visit  
1. Connect the TTY device to the phone.  
2. Select Menu > Settings > Accessories >  
TTY Device.  
3. At the notification, select OK.  
4. Select TTY On to connect or TTY Off to  
not connect.  
To enable data mode, select Menu > Settings >  
Network > Data Calls and of the following:  
Voice Only turns data mode off.  
Data, next call sets the phone to data  
mode for the next incoming call or the  
next ten minutes.  
Data, until off sets the phone to data mode  
until the phone is turned off.  
Tip: You can also enable TTY when you enter  
##889 with your keypad and select TTY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
51  
Privacy alert  
Roam option  
You set your phone to alert you when  
enhanced digital CDMA privacy is lost or  
regained. Select Menu > Settings > Network >  
Privacy Alert > Enabled.  
You can restrict your phone from making a call  
when roaming. Select Menu > Settings >  
Network > Roam Option > Automatic  
(allows roaming) or No Roaming  
(disallows roaming).  
Voice privacy  
Set phone line  
Set your phone to use enhanced digital CDMA  
privacy. Select Menu > Settings > Network >  
Voice Privacy > Enhanced.  
Your phone can have two service accounts, or  
phone lines, associated with it. Each phone line  
has its own phone number. Select Menu >  
Settings > Network > Set Phone Line and a  
phone line. When you are using one line, you  
cannot receive calls from the other. It would be as  
if the phone were “off” for that number.  
Roaming service alert  
Use this setting if you want the phone to alert  
you when you roam outside of your home  
service area. Select Menu > Settings >  
Network > Roam/Svc Alert and one of  
the following:  
Your voicemail, however, will still take messages.  
All contacts and settings are shared for both lines.  
Disabled turns roaming service alert off.  
When no svc alerts you with three tones  
decreasing in pitch when service is lost and  
three tones increasing in pitch when service is  
acquired again.  
On roam change alerts you with two  
decreasing tones when roaming service is  
acquired and three increasing tones when  
home area service is acquired again.  
On any change alerts you with three  
increasing tones if there is a change in  
roaming service or three decreasing tones if  
the phone loses service.  
Note: You must first establish a second phone  
line with your service provider. Once established,  
a second phone number becomes available in the  
menu for selection.  
Location  
This setting allows you to share your location  
information with network services other than  
emergency services (for example, 911, 111, 999  
and 000) in markets where service has been  
implemented. This feature works only when your  
phone is in digital mode. You do have the option  
of turning off the locator to emergency services.  
Select Menu > Settings > Network > Location  
and one of the following:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Network  
911 Only (default) shares your position  
information only with emergency services  
when you call your 3-digit emergency code.  
Location On shares your position  
information, in addition to  
Security  
This section describes all the features involved in  
securing your phone and preventing access to  
personal information. All security features are  
shielded by a four-digit lock code.  
emergency services.  
Lock phone  
Web alert  
You can set an alert to confirm the start or exit of  
the browser. Select Menu > Settings >  
When your phone is locked, you can call only  
emergency numbers or your service provider’s  
customer service number. You can still receive  
incoming calls.  
Network > Web Alert and one of the following:  
At Start prompts when you start a session.  
At End prompts when you end a session.  
Both prompts when you start and end  
a session.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
3. Select Lock Phone and one of the following:  
Never leaves the phone always unlocked.  
On power up locks the phone every time  
you turn it on.  
No Prompts for no prompts.  
Roam call alert  
Now locks the phone immediately.  
You can set the phone to warn you before you  
answer or place a call while roaming. Select  
Menu > Settings > Network >  
Do the following to unlock the phone:  
1. From the home screen, select Unlock.  
2. Enter your four-digit lock code.  
Roam Call Alert > Call Prompt.  
The phone emits a distinctive ring to indicate  
when you are roaming during a call. To accept or  
place a call while roaming, you must press 1.  
Limit calls  
You can limit the calls that can be made from  
your phone to emergency numbers, your  
contacts, and your service provider’s numbers.  
Note: Call prompt is disabled when the phone is  
in Emergency Mode.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
53  
3. Select Limit Calls and one of the following:  
3. Select Erase Contacts and one of  
the following:  
No Limit does not limit calls.  
Limit Outgoing limits outgoing calls.  
Incoming calls can be answered.  
Limit All limits both incoming and  
outgoing calls.  
No exits without erasing contacts.  
Yes erases all contacts. A confirmation  
prompt appears to verify your decision.  
4. Select Yes to confirm.  
ICE numbers  
New lock code  
The ICE (in case of emergency) numbers  
feature allows you to specify three personal  
phone numbers that can be called when the  
phone is locked.  
Change your lock code from the default provided  
by the service provider. The lock code is typically  
0000 or the last 4 digits of your phone number.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
3. Select New Lock Code.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
3. Select ICE Numbers.  
4. A confirmation prompt appears. Select Yes.  
5. Enter a new four-digit code.  
6. Re-enter your new lock code.  
The lock is now changed.  
4. Select an Unassigned slot.  
5. Enter the number and select Done.  
You can view these numbers only when they’re  
being entered for the first time.  
To make a call to an ICE number from a locked  
phone, you must dial the number (including area  
code) exactly as it was stored in ICE numbers.  
Erase contacts  
You can erase all entries from your  
Contacts directory.  
1. Select Menu > Settings > Security.  
2. Enter your four-digit lock code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
Security  
13 Voice Commands  
Voice commands allow you to call a contact, dial  
a phone number, access menus, or find contact  
information from your voice dial list.  
Remove contacts  
To remove a contact from your voice dial list:  
1. Select Menu > Contacts > Voice Dial List.  
Note: You cannot use voice recognition to end  
a call; you must press the End key when the flip  
is open.  
2. At the contact list, highlight a check marked  
contact and press the OK key. No check  
mark appears next to a name when voice  
dialing is inactive. Uncheck each name you  
wish removed from voice dialing.  
Voice dial list  
To call or find a contact using voice dial you  
must add the contact to your voice dial list.  
The contact name must not have more than  
three words or components in a contact name  
for voice dialing recognition.  
3. Select Save.  
Voice commands  
Start voice commands  
1. From the home screen, press the Send key to  
initiate voice commands. The phone  
prompts, “Say a command”.  
Add contacts  
To add a contact to your voice dial list:  
1. Select Menu > Contacts > Voice Dial List.  
2. Say one of the following commands and  
2. At the contact list, highlight a contact  
and press the OK key. A check mark  
appears next to a name when voice  
dialing is active. Check each name you  
wish use with voice dialing.  
following the voice prompts.  
Contact <name>” call to a contact on  
your voice dial list.  
Dial Number <number>” call by  
speaking the digits of the phone number.  
<shortcut name>” sends you to a  
menu item.  
3. Select Save.  
Find Contact” allows you to find a  
contact from your voice dial list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
55  
Call a contact  
Call a number  
1. If you haven’t already done so, add the  
person you wish to call to the voice dial list.  
See “Voice dial list” on page 55.  
1. From the home screen, press the Send key.  
The phone prompts, “Say a command”.  
2. Say “Dial Number” and then speak the digits  
of the number you want to call. If you pause,  
the phone prompts you, “Did you say  
2. From the home screen, press the Send key.  
The phone prompts, “Say a command”.  
<number>” or “Say a number” if it does not  
recognize the name. Say “Yes” to make the  
call, “No” to cancel the phone call.  
3. Say “Contact” and then name of the person  
you want to call.  
The phone prompts, “Please repeat” or “Say  
a name” if it does not recognize the name. If  
the name you spoke matches a contact in the  
Voice Dial List, the phone prompts: “Name,  
correct?” Say “Yes” to make the call, “No” to  
select a similar name, or “Cancel” to cancel  
the phone call.  
3. Press the End key to end the call.  
Use shortcuts  
1. From the home screen, press the Send key.  
The phone prompts, “Say a command”.  
2. Say the name of the menu item you want to  
access or say “Shortcut” to view a list of  
menu items. The phone prompts, “Say one of  
the shortcuts”.  
If the phone finds multiple voice tags that  
sound like the name you said, the phone will  
list the names, you will be asked to verify  
which name you want to call. Say “Yes” when  
you hear the correct name. Say “No” when  
you hear an incorrect name.  
3. Say the name of the menu item you want  
to access.  
Tip: Press and hold the Send key to access the  
voice shortcuts list quickly.  
4. Press the End key to end the call.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Voice commands  
56  
Find contacts  
You can use voice commands to find contacts  
listed in your voice dial list.  
1. From the home screen, press the Send key.  
The phone prompts, “Say a commands”.  
2. Say “Find Contacts”. The phone prompts,  
“Say a name”.  
The phone prompts, “Please repeat” or “Say  
a name” if it does not recognize the name. If  
the name you spoke matches a contact in the  
Voice Dial List, the phone prompts: “Name,  
correct?” Say “Yes” to make the call, “No” to  
select a similar name, or “Cancel” to cancel  
the search.  
Voice command settings  
You can control settings for your phone’s voice  
recognition feature. For more information, see:  
“Automatic add” on page 49  
“Expert mode” on page 49  
“Display results” on page 49  
“Digit lengths” on page 50  
“Voice training” on page 50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
57  
14 Getting Help  
The name of your service provider.  
The actual error message or problem you  
are experiencing.  
The steps you took to reproduce the problem.  
The phone’s mobile equipment  
identifier (MEID).  
Customer support  
Your service provider’s customer support  
department may be accessible directly from your  
phone when you dial a number, such as *611  
(check with your service provider). They can  
answer questions about your phone, phone bill,  
call coverage area, and specific features available  
to you, such as call forwarding or voicemail.  
Note: To locate the MEID, select Menu >  
Phone Info > Build Info and scroll down to  
MEID for the 14-digit number. If your phone  
uses an electronic service number (ESN),  
ESN replaces MEID.  
For questions about the phone features, refer to  
the materials provided with your phone, or visit  
For additional questions, you may contact the  
Kyocera Wireless Corp. Customer Care Center in  
any of the following ways:  
Qualified service  
If the problem with your phone persists, return  
the phone with all accessories and packaging to  
the dealer for qualified service.  
Phone: 1-800-349-4478 (U.S. and Canada) or  
1-858-882-1401.  
Phone accessories  
To shop for phone accessories, visit  
also call us at 800-349-4188 (U.S.A. only)  
or 858-882-1410.  
Customer support phone numbers are also  
available in the following countries:  
India: 1-600-121214 or 0124-284-5000  
Puerto Rico: 1-866-664-6443  
Before requesting support, please try to  
reproduce and isolate the problem. When you  
contact the Customer Care Center, be ready to  
provide the following information:  
Become a product evaluator  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including  
cellular or PCS phones,  
visit beta.kyocera-wireless.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customer support  
58  
Index  
Numerics  
1-touch dialing, 44  
C
disabling, 33  
downloading, 32  
opening, 33  
calculator, 37  
calendar, See scheduler  
call history, See recent calls  
call lists  
A
removing, 33  
accessories, 58  
headsets, 51  
settings, 51  
auto-erase, 23  
auto-hyphenation, 44  
erasing, 16  
viewing, 16  
T-coil hearing aid, 51  
B
call logs, see recent calls  
call timers, 17  
callback number, 22  
text message, 19  
callers IDs, 39  
calls  
TTY device, 51  
activating Bluetooth, 42  
adding  
back key, 7  
backlight, 47  
backlight duration, 47  
banner, 47  
Bluetooth devices, 42  
codes, 25  
contacts, 24  
battery  
caring, 2  
answering, 8  
extensions, 25  
voice dial list, 49, 55  
airplane mode, 43  
set date/time, 44  
alarm clock, 36  
alerts  
charging, 1  
call lists, 16  
installing, 1  
data, 51  
recharging, 1  
Bluetooth, 42  
adding devices, 42  
connecting, 43  
disconnecting, 43  
pairing, 42  
emergency, 11  
ending, 9  
fax, 51  
holding, 44  
browser, 31, 53  
limiting, 53  
messages, 22  
making, 8  
minute, 46  
phone name, 43  
settings, 43  
turning on, 42  
bookmarks, 31  
BREW, 32  
roaming, 11  
pages, 22  
silencing, 10  
privacy, 52  
voice commands, 56  
capitalization, 14  
CDMA privacy, 52  
changing modes, text entry, 14  
color  
roaming calls, 53  
roaming service, 52  
vibrating, 48  
brightness, 47  
browser, 30  
alerts, 31, 53  
launching, 30  
options, 30  
voicemail, 22  
answering calls, 8  
any key, 46  
themes, 46  
com port speed, 51  
connecting Bluetooth devices, 43  
contacts, 24  
any key answer, 46  
appended messages, 20  
applications  
searching, 31  
adding, 24  
details, 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
59  
dialing  
1-touch, 44  
speed, 10  
voice list, 55  
directory, contacts, 24  
disconnecting, devices, 43  
display  
adding to a group, 26  
assign message tone, 25  
assign number type, 27  
assign picture, 25, 27  
assign ringer, 25, 27  
calling numbers, 25  
customizing, 25  
delete all, 29  
all contacts, 29  
all media files, 40  
contacts, 54  
multimedia messages, 20  
text messages, 20  
evaluation, product, 58  
F
banner, 47  
fast find, 45  
faxes, 51  
brightness, 47  
color themes, 46  
contrast, 47  
directory, 24  
editing, 24, 25  
email addresses, 26  
erase, 25  
erasing, 24, 26, 54  
fast find, 45  
frequent list, 45  
groups, 28  
memory, 29  
notes, 27  
primary number, 26  
searching, 29  
secret, 26, 27  
send as vCard, 24, 25, 28  
sending text message, 25  
speed dial list, 26  
street addresses, 26  
viewing all, 24  
voice search, 57  
web addresses, 26  
flip  
answering calls, 46  
sounds, 49  
folders  
language, 47  
main menu, 47  
screensavers, 46  
settings, 46  
draft, 21  
images, 39  
inbox, 19  
media gallery, 39  
outbox, 21  
sent, 21  
time/date format, 47  
wallpapers, 46  
download applications, 32  
downloading  
applications, 32  
games, 32  
drafts folder, 21  
sounds, 40  
frequent list, 45  
G
E
gallery, media, 39  
games, 34  
downloading, 32  
groups, 28  
earpiece, 8  
volume, 48  
editing contacts, 25  
email addresses, 26  
emergency  
calls, 11  
numbers, 54  
end key, 7  
entering  
assign message tone, 28  
assign picture, 28  
assign ringer, 28  
creating, 28  
erase, 28  
sending text message, 28  
using, 28  
contrast, 47  
convenience settings, 43  
conventions, using this guide, 7  
countdown timer, 38  
customer support, 58  
customizing contacts, 25  
letters, 13  
numbers, 13  
symbols, 14  
text, 15  
H
D
data  
headsets  
auto answer, 51  
erasing  
calls, 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
media files  
delete all, 40  
media gallery, 39  
memory, 33  
menus  
sounds, 51  
voice answer, 50  
voice wake-up, 50  
basic, 7  
key, 7  
shortcuts, 7  
network  
help, getting, 58  
hold calls, 44  
location information, 52  
set phone line, 52  
main, 6  
I
main view, 47  
settings, 41  
messages  
network settings, 51  
icons, 5  
notes, contacts, 27  
text message, 19  
notifications  
images  
browsing, 39  
saved, 39  
inbox, 19  
alerts, 22  
appended, 20  
auto-erase incoming, 23  
callback number, 22  
completing, 21  
failed, 21  
incoming calls, 21  
pending, 21  
preset text, 22  
saved, 22  
sent, 21  
settings, 22  
text messages, 19  
O
ok key, 7  
open to answer, 46  
outbox, 21  
outgoing calls, 16  
incoming calls, 16  
Internet, 30  
K
keypad  
P
key tone length, 49  
sounds, 49  
volume, 48  
pages alerts, 22  
pairing, 42  
phone  
keys  
answering calls, 8  
Bluetooth name, 43  
codes, 25  
extensions, 25  
icons, 5  
keys, 7  
frequently used, 4, 7  
tone length, 49  
tones, 49  
signature, 22  
text entry mode, 23  
text messages, 18  
unable to send, 20  
L
minute alerts, 46  
language, 47  
left softkey, 7  
lights only alerts, 48  
limiting calls, 53  
location information, 52  
lock code, 54  
locking  
making calls, 8  
overview, 3  
missed calls, 16  
deal with, 16  
modes  
setting line, 52  
turning on and off, 8  
pictures  
assigning, 39  
playback tools, 40  
power  
on and off sounds, 49  
prepend, 25  
preset text, 22  
airplane, 43  
expert, voice, 49  
ringers, 48  
text entry, 13  
multimedia messages  
erasing, 20  
phone, 53  
text messages, 20  
M
N
main menu, 6, 47  
making calls, 8  
navigation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
61  
primary number, 26  
privacy alerts, 52  
fast find, 45  
erasing, 40  
flip closed, 49  
flip open, 49  
keypad, 49  
frequent list, 45  
voice commands, 57  
world clock, 38  
Q
quick alarm, 37  
security  
locking, 40  
R
emergency numbers, 54  
erasing contacts, 54  
limiting calls, 53  
lock code, 54  
locking phone, 53  
settings, 53  
playback tools, 40  
power on and off, 49  
ringers, 48  
saved, 40  
settings, 48  
silence all, 48  
volume, 48  
rapid entry, 13  
receipt request  
multimedia messages, 23  
text message, 19  
text messages, 23  
recent calls, 16  
erase all, 23  
redialing, 8  
replying  
text messages, 19  
sent folder, 21, 22  
set priority  
text message, 19  
settings  
accessories, 51  
speakerphone, 9, 10  
volume, 48  
speed  
dialing, 10  
restrict roaming, 52  
right softkey, 7  
ringers, 40, 48  
mode, 48  
alarm clock, 36  
Bluetooth, 43  
convenience, 43  
date and time, 44  
display, 46  
menu, 41  
messages, 22  
network, 51  
quick alarm, 37  
scheduler, 36  
security, 53  
sounds, 48  
voice commands, 49, 57  
world clock, 38  
stopwatch, 38  
support, customer, 58  
symbols, 14  
T
roam, 48  
T-coil hearing aid, 51  
teletype, 51  
text entry, 13  
silent mode, 48  
type, 48  
volume, 48  
capitalization, 14  
changing modes, 14  
current mode, 13  
default mode, 23  
letters, 13  
roaming  
call alerts, 53  
restrict, 52  
service alerts, 52  
S
numbers, 13  
scheduler, 34  
creating events, 34  
modifying events, 36  
settings, 36  
viewing events, 35  
screensavers, 39, 46  
searching  
quick reference, 15  
rapid entry, 13  
text entry mode, changing, 23  
text messages  
shortcuts  
navigation key, 7  
signature, 22  
silent mode, 48  
smart sound, 48  
sounds  
callback number, 19  
creating, 18  
erasing, 20  
forwarding, 19  
browsing, 40  
contacts directory, 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
W
voice  
icon, 19  
wallpapers, 39, 46  
web  
answer, 50  
dial list, 55  
memos, 40  
privacy, 52  
training, 50  
wake-up, 50  
locking, 20  
notification, 19  
options, 18  
preset text, 18  
replying, 19  
request receipt, 19, 23  
retrieving, 19  
saving, 19  
send later, 19  
sender information, 20  
set priority, 19  
validity period, 19  
viewing, 19  
addresses, 26  
alerts, 53  
browser, 30  
web addresses, contacts, 26  
world clock, 38  
searching, 38  
voice commands, 55  
calling contacts, 56  
calling numbers, 56  
display results, 49  
expert mode, 49  
find contacts, 57  
settings, 49  
shortcuts, 56  
training, 50  
time calls, 46  
timer, 38  
tip calculator, 37  
tools, 34  
voice dialing  
activating, 9  
adding contacts, 55  
automated lists, 49  
digit lengths, 50  
removing contacts, 55  
voice memos, 34  
erasing, 34  
alarm clock, 36  
calculator, 37  
scheduler, 34  
stopwatch, 38  
timer, 38  
tip calculator, 37  
voice memo, 34  
world clock, 38  
TTY device, 51  
turning on and off, 8  
locking, 34  
playing, 34  
recording, 34  
voicemail, 11  
alerts, 22  
U
number, 23  
using  
volume, 48  
groups, 28  
adjusting, 10  
V
earpiece, 48  
validity period  
text message, 19  
vibrating call alerts, 48  
viewing contacts, 24  
keypad, 48  
ringers, 48  
smart sound, 48  
speakerphone, 48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Guide  
63  
Kyocera Wireless Corp.  
82-K8216-1EN, Rev. 001  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KVH Industries Satellite TV System LF User Manual
Lenoxx Electronics Telephone PH 5562 User Manual
Link electronic DVR PCR 8200 User Manual
Linksys Network Router WRT54GX4 User Manual
Magnavox Cassette Player VRX562AT99 User Manual
Makita Flat Panel Television 43901D User Manual
Mars Air Systems Air Compressor L 2254 User Manual
Martin Audio Portable Speaker C115 C115T User Manual
Meade Telescope 114 EQ ASB User Manual
M Systems Flash Disk Pioneers Computer Accessories 91 SR 005 10 7L User Manual