Download from Www.Somanuals.com. All Manuals Search And Download.
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power level
in all tested frequency bands.
Caution
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the warranty and user’s
authority to operate the equipment.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value.
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to
optimize the performance and life of your phone
and battery.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower
the power output.
Air bags
If your vehicle has an air bag, DO NOT place
installed or portable phone equipment or other
objects over the air bag or in the air bag deployment
area. If equipment is not properly installed, you and
your passengers risk serious injury.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that
it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The phone
should be kept at least six (6) inches away from the
pacemaker to reduce risk.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The Health Industry Manufacturers Association and
the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under
the Display Grant section
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
http://www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFKWC-K24B.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to discuss
alternatives.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
Other medical devices—If you use any other personal
medical device, consult the manufacturer of the
device to determine if it is adequately shielded from
external RF energy. Your physician may be able to
help you obtain this information.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
In health care facilities—Turn your phone off in health
care facilities when instructed. Hospitals and health
care facilities may be using equipment that is
sensitive to external RF energy.
Resetting the phone
If the screen seems frozen and the keypad does not
respond to keypresses, reset the phone by
completing the following steps:
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer
for service.
Aircraft—FCC regulations prohibit using your phone
on a plane that is in the air. Turn your phone off or
switch it to Airplane Mode before boarding aircraft.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Vehicles—RF signals may affect improperly installed
or inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer of the device
to determine if it is adequately shielded from external
RF energy.
Blasting areas—Turn off your phone where blasting is
in progress. Observe restrictions, and follow any
regulations or rules.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power of
the RF signal. This power level can range from 0.006
to 0.6 watts.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies in the
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include:
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
vehicles using liquefied petroleum gas, such as
propane or butane
following reports:
•
•
•
ANSI C95.1 (American National Standards
Institute, 1992)
NCRP Report 86 (National Council on Radiation
Protection and Measurements, 1986)
ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
•
•
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
Your phone complies with the standards set by these
reports and the FCC guidelines.
Use with care
Use only in normal position (to ear). Avoid dropping,
hitting, bending, or sitting on the phone.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates issued
by the FCC.
Keep phone dry
If the phone gets wet, turn the power off immediately
and contact your dealer. Water damage may not be
covered under warranty.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Hearing Aid Compatibility (HAC) with Mobile Phones
Battery and charger specifications
Charger Input
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user. Some hearing devices are
more immune than others to this interference noise,
and phones also vary in the amount of interference
they generate.
Output
CV90-G2968-01 120VAC 60Hz 7W
CV90-G2588-01 100-240VAC 50/60Hz 0.2A
CV90-G2589-01 100-240VAC 50/60Hz 0.3A
Standard Battery:
5.2VDC400mA
4.2VDC 0.6A
4.5VDC 1.2A
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the
rating on their box or a label on the box.
CV90-P3030-05 3.7V 1000mAh
Standard Robust Battery:
CV90-P3031-05 3.7V 900mAh
Extended Battery:
The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
CV90-P3032-03 1800mAh
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
M-Ratings— Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two ratings.
T-Ratings— Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device’s telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher
of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Hearing devices may also be measured for immunity
to this type of interference. Your hearing device
manufacturer or hearing health professional may
help you choose the proper rating for your mobile
phone. The more immune your hearing aid is, the
less likely you are to experience interference noise
from mobile phones.
For more information about hearing aid compatibility,
visit the FCC's Consumer & Governmental
Hearing Aid Compatibility (HAC) rating: M4
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
v
CONTENTS
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery. . . . . . . . . . . . . . . . . . . . 1
Getting to know your phone . . . . . . . . . . . . . . 3
Choosing ringers . . . . . . . . . . . . . . . . . . . . . 33
Setting sounds for your phone . . . . . . . . . . . 34
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . 35
Personalizing the screen . . . . . . . . . . . . . . . 36
Creating a secure environment. . . . . . . . . . . 38
Setting position location. . . . . . . . . . . . . . . . 41
Using Voice Recognition . . . . . . . . . . . . 42
Setting up voice dialing . . . . . . . . . . . . . . . . 42
Making a call using voice tags . . . . . . . . . . . 42
Making a call using digit dialing. . . . . . . . . . 43
Training voice recognition . . . . . . . . . . . . . . 44
2
Making and Answering Calls . . . . . . . . . . 8
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . 8
Silencing an incoming call . . . . . . . . . . . . . . . 9
Using the speakerphone. . . . . . . . . . . . . . . . . 9
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting up voicemail . . . . . . . . . . . . . . . . . . . 12
Understanding roaming . . . . . . . . . . . . . . . . 13
Using your phone in an airplane . . . . . . . . . 14
8
9
3
4
Entering Letters, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . . 15
Using the Camera . . . . . . . . . . . . . . . . . . 45
Taking a picture. . . . . . . . . . . . . . . . . . . . . . 47
Camera key map . . . . . . . . . . . . . . . . . . . . . 47
Storing Contacts . . . . . . . . . . . . . . . . . . . 18
Creating a new contact . . . . . . . . . . . . . . . . . 18
Adding a code or extension . . . . . . . . . . . . . 18
Customizing your contacts . . . . . . . . . . . . . . 18
Editing a contact . . . . . . . . . . . . . . . . . . . . . 20
Erasing a contact . . . . . . . . . . . . . . . . . . . . . 20
Sending a vCard . . . . . . . . . . . . . . . . . . . . . . 20
Customizing a phone number. . . . . . . . . . . . 20
Finding contact information . . . . . . . . . . . . . 21
10 Using Media Gallery . . . . . . . . . . . . . . . . 48
Accessing files . . . . . . . . . . . . . . . . . . . . . . . 48
11 Using Tools and Games . . . . . . . . . . . . . 50
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . 50
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . 51
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . 52
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5
6
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . . 22
Sending text messages . . . . . . . . . . . . . . . . . 22
Retrieving text messages. . . . . . . . . . . . . . . . 25
Customizing message settings. . . . . . . . . . . . 27
®
12 Using Bluetooth Wireless
Technology. . . . . . . . . . . . . . . . . . . . . . . . 57
Sending and Receiving
13 Connecting to the Internet . . . . . . . . . . . 60
Using the Web Browser . . . . . . . . . . . . . . . . 60
14 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 62
Multimedia Messages . . . . . . . . . . . . . . . 29
Sending multimedia messages . . . . . . . . . . . 29
Receiving multimedia messages . . . . . . . . . . 30
Viewing multimedia messages . . . . . . . . . . . 31
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
7
Customizing Your Phone . . . . . . . . . . . . 32
Silencing all sounds . . . . . . . . . . . . . . . . . . . 33
vi
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
Installing the battery
Charging the battery
Your Kyocera K323 phone comes with a
removable lithium ion (LiIon) battery. Fully
charge the battery before using the phone.
You must have at least a
partial charge in the battery
to make or receive calls.
You must use a Kyocera-authenticated battery in
your phone. If you attempt to use a battery that has
not been authenticated you will receive a security
warning. Contact your service provider to obtain a
Kyocera-authenticated battery.
To charge the battery:
1. Connect the AC adapter
to the jack on the bottom
of the phone.
2. Plug the adapter into a wall outlet.
To install the battery:
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
1. Hold the phone
face down.
•
•
•
Charging (the icon is animated)
Partially charged
Fully charged
2. Slide the battery door
downward to remove it.
3. Place the battery in the
phone casing with the
metal contacts facing
towards the bottom of
the phone.
Note: The battery will not charge if you use the
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
4. Replace the battery door
by sliding the notches into
the openings at the
Note: To remove the battery, make sure the phone
is powered off.
bottom and outside edges
of the battery casing.
5. Slide the door up to
secure the cover
into place.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Caring for the battery
Accessing keypad shortcuts
General safety guidelines
Navigation key
shortcuts
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
From the home screen, press the navigation key in
one of four directions to access three shortcuts
and one custom menu (see page 35 for
If you have not used the battery for more than
a month, recharge it before using your phone.
Avoid exposing the battery to extreme
temperatures, direct sunlight, or
high humidity.
instructions on setting up your custom menu).
•
Never dispose of any battery in or near a
fire. It could explode.
Common causes of battery drain
•
•
•
•
Playing games or using the Web.
Taking pictures with the flash on.
Keeping backlighting on.
Operating in analog ( ) mode. Your phone
switches between modes to find the best
signal. To set your phone to operate in a single
mode, select Menu → Settings →
Network → Digital/Analog.
•
Operating in digital mode when far away from
a base station or cell site.
•
•
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted alerts.
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your phone
The phone is shown here in open position. When the phone is closed, the keys are locked to prevent
accidental key presses.
Home screen.
1
2
Speakerphone key activates the speakerphone and answers
incoming calls.
Left softkey accesses menus and functions.
3
4
Navigation key scrolls through lists and text entry fields and
accesses shortcuts from the home screen.
Send/Talk key starts or answers a call. Press once to activate
voice dialing, twice to display the Recent Calls list, and three
times to redial the last number dialed.
5
6
Back key erases characters in text entry and returns you to
the previous screen.
Keypad for entering numbers, letters, or symbols.
7
8
9
* Shift key changes the text mode in text entry.
Right softkey accesses the Contacts directory and other
menu options.
OK key selects a menu item or option.
10
11
End/Power key turns the phone on and off, ends a call or
browser session, and returns you to the home screen.
Space # key enters a space during text entry. Press and hold to activate or deactivate Silent mode.
12
13
14
0 Next key cycles through word choices during text entry.
Jack for AC adapter (included) and data cable
(sold separately).
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Jack for Hands-free Headset only (sold separately).
15
16
17
Volume key to raise or lower ringtone volume.
Camera key activates Camera mode. To activate Camera
mode, press and hold until you hear two beeps.
External earpiece
18
19
20
Camera lens.
External screen displays time, caller ID, signal and
battery strength.
Camera Flash/Message Indicator Light light flashes when
taking a picture or lights when you have a message or
missed call.
21
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menus
The contents of the main menu are as follows:
Recent Calls
All Calls
Messages
New Text Msg
New Picture Msg*
Voicemail
InBox
Browser Alerts*
Sent
OutBox*
Saved
Drafts
Media Gallery
Camera Pictures
Images
Tools & Games
Brick Attack
Race 21TM
Doodler
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Bluetooth*
On/Off
My Devices
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Recent Calls Timer
All Calls Timer
Contacts
View All
Add New
View Groups
Speed Dial List
Voice Dial List
Information
Sounds
Settings
Settings
Silent Mode
Sounds
Phone Info
Build Info
Icon Keys
Display
BREW Apps**
Convenience
Voice Features
Messaging
Security
Network
Accessories
Msg Settings
Group Lists*
Erase Messages
Stopwatch
Web Browser*
Launches the
browser
Camera
Launches the camera Gamepad Keymap
* Not available on all phones. Check with your service provider.
** Menu name varies by service provider.
Accessing menu items
•
From the home screen, press
to
In this guide, an arrow → tells you to select an
option from a menu.
select Menu.
•
•
Press
Press
to select Contacts.
left, right, up, or down to see
For example, Menu → Settings means select
Menu, then select the Settings option.
menus and options.
Note: To change the way the menus appear, see
“Choosing a menu view” on page 36 for details.
•
•
•
Press
Press
Press
to select a menu item.
to back up a menu level.
to return to the home screen.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Performing basic functions
To...
From the home screen...
Turn the phone on
Turn the phone off
Make a call
Press
Press and hold
Enter the number and press
and wait until the phone beeps.
until the phone beeps.
.
End a call
Press
Press
.
.
Answer a call
Access voicemail
Verify your phone number
Press and hold
and follow the system prompts.
Select Menu → Phone Info → Build Info.
Silence the ringer on an
incoming call
Press
Press
or
then
to answer.
Activate voice dialing
Launch the browser
Record a voice memo
Access Recent Calls list
Take a picture
once and follow the prompts (see page 42).
Press and hold
Press and hold
left.
right.
Press
down.
Press and hold camera key
. Focus on the image and press
to select Capture.
6
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding screen icons
These icons may appear on your phone’s screen.
High-speed (3G) data service is available
and active on your phone. Check with
your service provider for availability.
(blinking) The phone is sending
high-speed data.
(blinking) The phone is receiving
high-speed data.
High-speed data service is available, but
the phone is dormant.
The phone is operating in IS2000 (1X)
digital mode.
The phone is operating in IS95
digital mode.
The phone is operating in Analog
(FM) mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
The phone is at the home screen. To
A call is in progress.
access Menu, press
The phone is at the home screen. To
access Contacts, press
.
The phone is not receiving a signal. You
cannot make or receive calls.
.
The phone is set to light up instead
of ring.
The phone is roaming outside of its
home service area.
The phone is set to vibrate or to vibrate
and then ring.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
You have a text message.
You have a voice message.
The phone is in camera mode.
Camera flash mode is ready.
Bluetooth wireless technology is
enabled (On).
Camera zoom mode is ready.
Bluetooth wireless technology is
disabled (Off).
The battery is fully charged. The more
black bars, the greater the charge.
The alarm clock is set.
The phone is in privacy mode or is
accessing a secure Web site.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
7
2
MAKING AND ANSWERING CALLS
4. Follow the prompts.
Making a call
Make sure you are in an area where a signal can
5. Press
to end the call.
be received. Look for the
symbol on the home
Answering a call
screen. The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.
When the phone has been idle for a time, it
changes to power save mode. When you see
“Power Save” on your phone’s screen, press any
key to return to normal operating mode.
•
Press
-or-
to answer the incoming call.
1. Open the flip.
2. Enter the phone number and press
.
•
Press
to answer the incoming call and
turn on the speakerphone.
3. Press or close the flip to end the call.
Answering calls using the flip
Voice number dialing
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data or fax calls.
Voice dialing requires that a contact be saved with
a voice tag. See page 42.
1. Press
to initiate voice dialing.
•
Select Menu → Settings → Convenience →
Open to Answer → Enabled.
2. Say the name of the contact when prompted
“Say a name.” The phone places the call.
–
Select Disabled to have the phone
continue ringing when you open the flip.
3. Press
once.
Digit dialing
Adjusting the volume during a call
•
1. Press
to initiate voice dialing.
To adjust the earpiece volume during a call,
2. When prompted say “dial”.
press
up or down.
3. When prompted “Speak a digit”, say a digit.
After the voice recognizer repeats the digit say
the next digit.
8
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
To turn on the speaker, press
press during an incoming call alert,
you answer the call.
. If you
Silencing an incoming call
•
Press
or
.
Note: In the absence of voicemail, this feature
drops the call.
The icon at the top of the phone screen
indicates that the speakerphone is on.
- or -
To turn off the speakerphone, press
.
•
Press
then press
to answer the call.
This action silences the current call only. The next
call will ring as normal.
Setting the phone to hold calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Redialing a number
•
To redial a recent call, press
open your Recent Calls list. Highlight a phone
number or name and press
Tip: To redial the last number called,
received, or missed, press three times.
twice to
Note: This feature will not work if “Open to
Answer” is enabled. See “Answering calls using
the flip” on page 8.
.
1. Select Menu → Settings →
Convenience → Hold Call → Enabled.
–
If you have not recorded a hold message,
you will be prompted to record one, such
as “Please hold. I’ll answer in a minute.”
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
2. Record the message twice, as prompted.
1. From the home screen, press
to
3. Select Save or Options (Play, Re-Record,
select Contacts.
or Exit).
2. Scroll down the list to find the contact you
The next time a call comes in, you will have the
option of placing it on hold.
want to call.
3. Highlight the name and press
to dial
the number.
Placing a call on hold
You can place a call on hold once you have
enabled this feature.
Using the speakerphone
Your Kyocera K323 phone has a built-in
speakerphone.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
Setting missed call alerts
You can set an alert to beep every five minutes
after you have missed a call.
1. When a call comes in, press
to select
1. Select Menu → Settings → Sounds →
Hold Call. The caller will be placed on hold
and will hear your recorded hold message.
Alerts → Missed Call Alert.
2. Select an option and press
.
2. To speak to the caller, select Answer.
Viewing recent call details
- or -
Details on the last 60 calls you made, received, or
missed are stored in the Recent Calls list and are
identified by the following icons:
To hang up without speaking to the caller,
select End Call.
Changing the hold message
Outgoing call
Incoming call
1. Select Menu → Settings →
Convenience → Hold Call →
Missed call (flashing)
Re-Record Msg and follow the prompts.
Viewing recent calls
2. Record the message twice.
1. Select Menu → Recent Calls.
2. Select a list: All Calls, Incoming Calls,
3. Select Save or Options (Play, Re-Record,
or Exit).
Outgoing Calls, or Missed Calls.
Dealing with missed calls
3. Select a recent call item and press
to
When you have missed a call, “Missed Call”
appears on your screen unless the caller
leaves a voicemail.
select Options, options may vary:
–
–
–
Save adds the phone number to the
Contacts list.
•
•
To clear the screen, press
to select OK.
Send Text Msg sends a text message to
the contact.
Send Picture Msg sends a picture message
to the contact. *Check with your service
provider for availablity.
To view details of the call, press
to select
Calls then press
To return the call, press
then press
.
•
to select Calls
.
–
Erase Record erases the selected
call record.
10
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock
code, see “Changing your lock code” on page 38.
To classify a phone number as secret, see
“Creating a new contact” on page 18.
•
To add a speed dial location to a saved or new
contact, see “Customizing a phone number”
on page 20.
Using speed dialing
To call a contact that has a speed dial location:
•
From the home screen, enter the one- or two-
digit speed dialing location and press
Calling recent calls
.
1. Press and hold
down.
2. Highlight the number you want to call and
1-Touch dialing
1-Touch dialing is the fastest way to speed dial a
contact that has a speed dial location.
press
- or -
.
1. Select Menu → Recent Calls →
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial location
assigned to a contact.
Outgoing Calls.
2. Highlight the number you want to call and
press
.
Enabling 1-Touch dialing
Erasing recent calls
•
Select Menu → Settings → Convenience →
1. Select Menu → Recent Calls →
1-Touch Dialing → Enabled.
Erase Call Lists.
Using 1-Touch dialing
2. Select an option: All Calls, Incoming Calls,
To call a contact that has a speed dial location:
Outgoing Calls, or Missed Calls.
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
speed dialing location is 15, press
3. Press
to select Yes.
Speed dialing
Before you can use speed dialing, you must save a
phone number as a contact and assign a speed
dial location to it.
briefly, then press and hold
.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
11
•
You can set the phone to beep or vibrate
every five minutes to remind you that you
have voicemail.
Setting up voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
See “Setting message alerts” on page 35.
Calling emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
1. From the home screen, press and hold
.
•
Dial your 3-digit emergency code and
press
2. Follow the system prompts to create a
.
password and record a greeting.
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters Emergency mode. This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
To exit Emergency mode
When you have completed the emergency call:
1. Press Exit.
If you see “New Messages”
1. Press
to your voicemail number.
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
Press to select Ignore.
to select Call, which initiates a call
2. Press Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Setting position location” on
page 41.
•
If you see only the
symbol
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Press and hold
to initiate a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
1. Select Menu → Recent Calls.
12
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select a timer:
2. Select an option and press
.
–
Recent Calls Timer tracks all calls you
have made and received since you last
reset this timer. To reset this timer to zero,
–
–
–
–
Automatic automatically switches the
phone between digital and analog.
Analog only sets the phone to work in
analog mode only.
Analog call forces a call into analog mode
for the duration of the next call.
Digital only sets the phone to work in
digital mode only.
press
to select Reset.
–
All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.
Timing your calls
You can set your phone to beep 10 seconds
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
before each minute passes when you are on a call.
•
Select Menu → Settings → Sounds →
Minute Alert → Enabled.
1. Select Menu → Settings → Network →
Roam/Svc Alert.
Receiving data or faxes
2. Select an option and press
.
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 40.
–
–
–
When no svc alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
Understanding roaming
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Controlling network roaming
Depending on services available from your
service provider, you may set the phone to either
digital or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
1. Select Menu → Settings → Network →
Digital/Analog.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Please check with uniformed personnel before
operating your phone in Airplane mode.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
Setting Airplane mode
•
Select Menu → Settings → Sounds →
Roam Ringer → Enabled.
1. Select Menu → Settings →
Convenience → Airplane Mode.
2. Select OK after reading the message.
Setting Call Guard
3. Select Disabled or Enabled.
You can set the phone to warn you before you
answer or place a call while roaming.
•
Select Menu → Settings → Convenience →
Call Guard → Call prompt.
–
The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
–
To accept or place a call while roaming,
you must press
.
Note: Call Prompt is disabled when the phone is
in Emergency Mode.
Using your phone in an airplane
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control.
In Airplane mode, however, your phone will not
emit RF signals. You cannot make or receive calls,
send text messages, use the Web, or Bluetooth
Wireless Connectivity but you can play games, use
the Scheduler, set the clock, and make emergency
calls to designated emergency numbers.
14
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ENTERING LETTERS, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Entering numbers
•
•
To enter a number while in
a number key once.
mode, press
or
Understanding text entry
screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
To enter a number while in
mode, press and hold a number key until the
number appears on the screen.
Entering words letter by letter
characters
remaining
capitalization setting
text entry mode
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
text entry
fields
2. Wait for the cursor to move right and enter the
next letter.
Note: To enter a space, press
.
Text entry modes
There are six text entry modes:
Entering words quickly
When you press a series of keys using
checks its dictionary of common words and
guesses at the word you are trying to spell.
mode,
Case change
Rapid Entry
Add Symbol
Add Smiley
Numbers only
Normal alpha
1. For each letter of the word you want, press the
key once. For example, to enter the word
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in number mode. When
entering a name for a contact, you’re in normal
text mode. See “Changing modes” on page 16.
“any” press
2. If the word doesn’t match what you want,
press to look at other word matches.
3. When you see the word you want, press
→
→
.
.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Entering symbols
Changing modes
While entering text in normal text mode, you can
Sometimes you need to change modes. For
enter symbols by pressing
until you see the
example, to enter numbers in an email address
symbol you want. Using this method, you have
access to the
following symbols:
while in
mode, enter the numbers, and then change
back to mode to complete the address.
To change text entry modes:
mode, you must change to
.
@ ?
To access the full set of symbols:
1. From the text entry screen, select Options.
!
-
,
& :
‘
1
•
Press and hold
until the icon for the
mode you want appears at the top of
the screen.
2. Select
Add Symbol.
-or-
3. Press
up or down to view the list of
•
Select Options then select a different mode.
symbols.
4. Press the number key corresponding to the
Capitalization settings
You can change capitalization at any time while
symbol you want.
entering text. Simply press
or lower case while in
to choose upper
Normal Alpha mode.
Entering smileys
1. From the text entry screen, select Options.
2. Select
Add Smiley.
3. Press
up or down to view the list
of smileys.
4. Press the number key corresponding to the
smiley you want.
Switching default text entry modes
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
1. Select Menu → Messages →
Msg Settings → Default Text.
2. Select Normal Alpha or Rapid Mode.
16
Entering Letters, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 15.
Enter a number
Enter a symbol
Enter a smiley
Use mode and press a key once to enter its number.
For more options, see page 15.
In normal text mode, press
you want. See page 16.
until you find the symbol
Use
mode and press a key once to enter its number.
For more options, see page 16.
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Lowercase any letter
Initial Caps
Press and hold
.
Press
Press
right or left.
up or down.
Press and hold
.
In
In
In
mode, press
. Choose
. Choose
. Choose
or
.
mode, press
mode, press
.
.
Select soft options on the screen
Press the appropriate key,
.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
17
4
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
Adding a code or extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing, for example, where you would wait
to dial an extension.
1. From the home screen, enter the phone
Creating a new contact
number.
1. From the home screen, enter the phone
number you want to save, including the
area code.
2. Press
to select Options.
3. Select a type of pause:
–
–
Time Pause causes the phone to
stop dialing for two seconds.
Hard Pause causes the phone to
stop dialing until you select
Options → Release while making the call.
2. Press
to select Save.
3. Press
to select Save New Contact.
4. Enter a name for the contact.
–
If you need to learn how to enter letters,
see “Understanding text entry screens” on
page 15.
4. Enter the remaining numbers.
5. Press to select Save.
–
To add a symbol or smiley to the contact
name, or to change the text entry mode,
Customizing your contacts
press
to select Options.
You can customize each contact in your Contacts
directory by assigning ringers, pictures, and
number types, or by classifying your contacts as
Personal or Business.
5. Either save now or add more contact
information.
–
–
To save now, press
to select Save.
To enter additional phone numbers, email
and Web addresses, or notes, press
down repeatedly. For help switching
between numbers and letters for email or
Web addresses, see “Changing modes” on
page 16.
Assigning ringers
1. Press
to select Contacts.
2. Highlight a contact and press
.
3. Highlight the contact name and press
to
select Options.
18
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Ringer → Assign Ringer.
Assigning number types
5. Scroll down the list to hear the different
When you assign a number type, an icon is placed
in front of a contact number to specify the type of
number, such as work, home, or mobile.
ringers and press
to select one.
Assigning pictures
1. Press
to select Contacts.
1. Press
to select Contacts.
2. Highlight a contact and press
the contact number and press
Edit.
. Highlight
to select
2. Highlight a contact and press
.
3. Highlight the contact name and press
to
select Options.
3. Press
down once and press
.
4. Select Picture → Assign Picture → Images.
5. Select Saved Images or Caller IDs.
4. Highlight an option to designate the number
as General, Work, Home, Mobile, Pager, or
Fax and press
. You can also add email
Note: With mobile PhoneTools for Kyocera,
you can transfer digital pictures to your
phone. To purchase MPT or other
accessories, visit
addresses, street addresses, Web page URLs,
and a note. The associated icon will appear
next to the entry in your Contacts directory
and Recent Calls list.
6. Scroll through the list to view your options
general
work
fax
and press
to assign it to your contact.
Classifying contacts as Personal or
Business
email address
street address
1. Press
2. Highlight a contact and press
3. Highlight the contact’s phone number and
press to select Options.
to select Contacts.
home
.
mobile
pager
Web page URL
note
4. Select Add to Group.
5. Select Personal or Business and press
.
Note: To assign Personal or Business ringers, see
“Assigning business and personal ringers” on
page 33.
5. Press
to select Save.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Editing a contact
1. Press
Customizing a phone number
1. Press
to select Contacts.
to select Contacts.
2. Highlight a contact and press
.
2. Highlight the contact to edit and press
.
3. Highlight the contact name or number and
press to select Edit.
3. Press
down to highlight the
contact number.
4. Enter your changes and press
to
4. Press
to select Options.
select Save.
5. Highlight an option and press
:
*Check with your service provider for
availability.
Erasing a contact
1. Press
2. Highlight the contact to erase and
press
to select Contacts.
–
–
Call to call the contact.
*Send Text Msg brings you to the text
messaging screen.
.
3. Select Options.
–
–
–
–
–
*Send Picture Msg brings you to the
picture messaging screen.
Add Speed Dial assigns or removes the
speed dial location.
View Number to see the selected phone
number.
4. Highlight Erase Contact and press
.
5. Press
to confirm.
Sending a vCard
You can send contact information as a
text message.
Erase Number erases the number from
the contact.
1. Press
to select Contacts.
Secret makes the number secret so that it
will not appear on the screen until the
lock code is entered. Secret numbers can
be called without a lock code. (For more
information, see “Limiting calls” on
page 39.)
2. Highlight the contact to send as a vCard and
press
.
3. Press
to select Options.
4. Highlight Send as vCard and press
.
Select an option:
–
–
via EMS
–
Primary Number makes this number
the first one that shows up when you open
the contact.
via Bluetooth
5. Enter a recipient’s phone number and press
to select Send.
20
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Send as Vcard send contact information
as a text message.
The menu skips to that letter of the alphabet.
- or -
–
–
Add to Group adds the number to a group.
Add Voice Dial to record a voice tag so you
can call a contact using voice recognition
(VR). For more information, see page 42.
Erase Voice Dial erases the voice tag
associated with the number.
Select Menu → Contacts.
2. Select a search method:
–
–
View All lists all saved contacts.
Speed Dial List, Voice Dial List,
View Groups selects a contact from the
specified list.
–
–
Edit Voice Dial records a new voice tag.
3. Highlight a contact and press
To call the contact, highlight the number
and press
.
6. Enter the new information and follow
–
the prompts.
.
7. Select Save, if necessary.
Setting Fast Find
Finding contact information
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
To find a phone number or contact, you can (1)
check the Frequent list, (2) search the Contacts
directory, or (3) use Fast Find.
•
Select Menu → Settings → Convenience →
Fast Find → Enabled.
Checking the Frequent List
Using Fast Find
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
when the Frequent List is enabled. Scroll past the
double line to view the All Contacts list.
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed dial
entry appears.
2. Press
down to scroll through
To enable the Frequent List setting
matching entries.
•
Select Menu → Settings → Convenience →
3. Highlight the name you want and then press
Frequent List → Enabled.
to call the number.
Searching the Contacts directory
1. Select Contacts for a list of all contacts.
To quickly get down the list, enter the first
letter of the contact.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
21
5
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone. For
information on voicemail messages, see “Setting
up voicemail” on page 12.
–
Press
to select Options then select
Recent List, Contacts, or Group Lists.
- or -
Enter a space or comma after the first
number then enter another recipient
manually.
–
Important: The features and menus described in
this chapter may vary depending on services
available in your area. Check with your service
provider for details and possible usage charges.
Note: You can send a message to up to 10
recipients at once. The messages will be sent
one at a time, once to each addressee.
Sending text messages
You can only send text messages to phones that are
capable of receiving them or to email addresses.
4. When you are done entering addresses,
press
twice.
5. Enter the message. To learn how to enter text,
see “Understanding text entry screens” on
page 15.
Creating a text message
1. Select Menu → Messages → New Text Msg.
2. Enter a recipient’s phone number or email
- or -
Add QuickText, symbols, or smileys to your
message. See “Including prewritten text and
symbols” on page 22 for information.
address:
–
Select Options to access your Recent List,
Contacts, or Group Lists and press
Select a contact and press
.
6. Press
to select Send. See “Setting
.
sending options” on page 23 for information
about how and when you want the message to
be received.
Highlight the number field and press
. For more about group lists,
see “Creating group lists” on page 27.
- or -
Including prewritten text and symbols
–
Enter a New Address manually. (To learn
how to enter text, see “Understanding text
entry screens” on page 15.)
During text entry, you can insert QuickText,
symbols, or smileys into your message.
1. From the text entry screen, select Options.
3. Add another recipient if desired:
2. Select an option and press
:
22
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Insert QuickText: Scroll through the list of
options and press to select one.
Add Symbol: Scroll through the list and
press the corresponding number key to
select it.
–
–
Save QuickText saves the message you
have just entered as a prewritten message
then returns to the message entry screen
so you can send the message.
Settings allows you to choose from the
following after pressing
:
–
Add Smiley: Scroll through the list and
press the corresponding number key to
select it.
•Set Priority labels the message as
“Urgent.”
3. When you have finished your message, select
Send. See “Setting sending options” for
information about how and when you want the
message to be received.
•Callback Number includes a callback
number with the message to let recipients
know at what number they can call you
back. Select OK to include your own
number or Edit to enter a different
callback number.
Setting sending options
When you are ready to send a message, you have
several options for how and when you want the
message to be received.
•Send Later schedules a time to send
the message.
•Validity period allows you to set a defined
1. Once you have completed the message,
expiration time limit for a message.
select Options:
2. When you have finished setting options, press
–
Add Address returns to the “Send To”
screen to add another recipient without
losing the message. Select Options to
access your Recent List, Contacts, or
to return to the message window.
3. Press
to select Send.
Adding a signature
Group Lists and press
Select a contact and press
.
.
The signature you create is included at the end of
all outgoing messages and is counted as
Highlight the number field and press
.
characters in your messages; however, it does not
appear in the message creation screen.
–
Save Message saves the message in
your Drafts folder. This prevents the
message from being deleted if you have
activated AutoErase and enables you to
send the message to others.
To create a signature:
1. Select Menu → Settings → Messaging →
Signature.
2. Enter your signature in the text field.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
23
3. Select OK to save the setting.
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0.
Note: The characters in the signature are
included in the total character count of the
message. See the note under step 5 in “Creating a
text message” on page 22.
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit, you are
prompted to edit the message or alerted that the
message is being appended.
If you cannot send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 26.
Note: Does not apply to all phones. Check with
your service provider for information.
Receiving incoming calls while
creating messages
Understanding appended messages.
capitalization setting
characters
remaining
•
If you don’t wish to answer the call, press
to select Ignore. The phone returns to
the message screen.
text entry mode
text entry
fields
•
To answer the call, press
. Your message
is saved to the Drafts folder. To return to the
message, select Menu → Messages →
Drafts → Resume.
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
Viewing your sent messages
To save your outgoing messages, you must first
Note: Not available on all phones. Check with
enable Save to Sent.
your service provider.
1. Select Menu → Messages →
Msg Settings → Save to Sent.
Important: Your service provider will charge you
for each message segment.
2. Select an option and press
.
–
Enabled automatically saves all
successfully sent messages in the
Sent folder.
24
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Prompt allows you to choose whether or
not to save your message when you send it.
1. Select Menu → Messages → OutBox. A list of
all failed or pending messages appears.
To view successfully sent messages:
2. Scroll through the list of messages and press
to read one. One of the following
1. Select Menu → Messages → Sent.
symbols appears next to each message:
2. Press
up or down to scroll through the
list of messages. One of the following symbols
appears next to each message:
The message is pending and will be sent
when possible. You can cancel delivery of
the message.
The scheduled message will be sent at the
scheduled time. You cannot cancel
delivery of the message.
The message cannot be sent
because service is not available. An alert
appears on your phone if the message
cannot be sent.
The scheduled message has been sent and
will be delivered as scheduled. You
cannot cancel delivery of the message.
Retrieving text messages
When a text message is received, your screen
The message has been received.
The message has been received and
opened. (This symbol may not be
available. Check with your service
provider.)
displays “New Messages” with the
symbol at
the top of your screen. The symbol flashes if the
message is urgent.
If you see the “New Messages” note
The message has been sent to more than
one recipient.
•
To view the message, press
to select
InBox, highlight the message, and press
to select View.
The message has never been sent or has
not been sent since it was last modified.
You can cancel delivery of the message.
•
To Ignore the message, press
.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
Viewing failed or pending messages
Failed or pending messages are stored in
your OutBox. To view your OutBox:
•
Select Menu → Messages → InBox.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Note: The
symbol indicates that a graphic did
If you see the
symbol
not come through. It may be too large or
incorrectly formatted.
1. Select Menu → Messages → InBox. A list of
all your received messages appears.
–
indicates an “Urgent” message.
Setting message alerts
2. Scroll through the list of messages and press
You can set your phone to alert you of incoming
text messages. For more information, see “Setting
message alerts” on page 35.
to read one.
Reading the message
The options available to you may vary. Check with
your service provider.
Erasing messages
It is a good idea to erase old messages to free up
memory in your phone.
1. If the text message is long, press
down
to view the entire message.
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox, or
erasing them all at once.
2. When you are finished, you can Reply to the
sender, Erase the message, Save the message
to your Saved folder, or set additional Options
for the message:
Erasing single messages
1. Select Menu → Messages.
2. Select the type of text message you want to
–
–
Erase the message.
Lock Msg to protect the message from
being accidentally deleted.
–
–
Forward the message.
erase and press
or Saved.
: InBox, OutBox, Sent,
Reply with Copy to reply to the message
with a copy of the original attached.
Save Message to save the message.
Save as QuickText to save the text from the
message as QuickText, which you can
insert into other messages. Graphics are
not saved as part of QuickText.(For more
about QuickText, see page 27.)
View Sender information.
3. Highlight the message to erase and
press
–
–
.
4. Select Options.
5. Select Erase to erase the message. A message
appears: “Erase this message?”
6. Select Yes to erase the message.
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of
the message.
–
3. Select Done.
26
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter a name for the list. For help entering
text, see “Understanding text entry screens”
on page 15.
Erasing all messages
1. Select Menu → Messages →
Erase Messages.
3. Select Next.
2. Select a folder from which to erase all
messages: InBox, OutBox, Sent, Saved Folder,
Drafts Folder, or All Messages. To erase
messages from all folders, select
All Messages.
4. To enter the first phone number or email
address, select an option:
–
–
–
Recent List to select numbers from your
Recent List.
Enter from scratch to enter the phone
number or email address manually.
Contacts List to select numbers from your
phone book.
3. A message appears: “Erase all messages?”
Select Yes to erase messages or No to cancel.
Erasing messages automatically
Use this setting to have old messages
automatically erased when memory is low.
5. Locate the contact number and press
6. Select Options → Recent List or Contacts.
7. Locate the contact number and press
8. When finished, select Done.
.
•
Select Menu → Messages →
Msg Settings → Auto-Erase →
InBox Msgs.
.
9. To send a message to your new group, see
Older messages will be erased as new
messages are received.
“Sending text messages” on page 22.
Creating and editing prewritten
messages (QuickText)
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
Your phone comes with prewritten (QuickText)
messages, such as “Please call me,” which you
can insert into the body of a text message. You can
edit these messages and create new ones. Your
phone will store up to 40 QuickText messages,
with up to 100 characters per message.
Creating group lists
You can create and save a list of multiple
recipients. Your Kyocera K323 phone stores five
group lists with up to 10 recipients per list.
1. Select Menu → Messages →
1. Select Menu → Messages → Group Lists →
Msg Settings → Edit QuickText.
Create New.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
27
2. To create a new pre-written message,
select New Msg.
-or-
To edit an existing pre-written message,
highlight the message and select Edit.
3. Enter or edit the text and press
Save. For help entering text, see
“Understanding text entry screens” on
page 15.
to select
Note: You can also save a message you have
written or received as QuickText. See “Setting
sending options” on page 23 or “Reading the
message” on page 26.
28
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
6
SENDING AND RECEIVING MULTIMEDIA MESSAGES
You can choose to send a copy or blind copy.
To show or hide these fields see “Hide or Show
CC/BCC fields” on page 30.
Sending multimedia messages
You can only send multimedia messages to
phones that are capable of receiving them or to
email addresses.
4. Press
down to enter a recipient in the
CC or BCC fields.
Note: Multimedia messaging is not available on
all phones. Check with your service provider.
5. Press
down to enter a message in the
Subject field. Choose a method:
Multimedia messages have a predetermined
character and file size limit. When you reach the
character and file size limit for a single
multimedia message, you must edit the message
to meet the size limitation. For details, check with
your service provider.
–
–
Enter the subject text manually, or
Press
to select Options.
6. Press
down once or select Next to enter
a brief text message in the Text field.
7. Press
down to enter the
Image field.
Creating a multimedia message
Note: You may add only one picture or one
sound per multimedia message.
1. Select Menu → Messages →
New Picture Msg.
8. Press
to select Options. Select an option:
2. Enter the recipient’s phone number or email
•
Take Picture to instantly take a new photo and
address in the To field.
attach it to your message.
3. To add additional recipients:
•
Media Gallery to access all picture and sound
–
Enter a space or comma after the first
phone number or email address, then
enter another recipient manually, or
files in the phone:
–
Camera Pictures displays your photos
taken in a table/thumbnail view.
–
Press
to select Options. Then select
• Highlight a photo to add to the
multimedia message. Press
to choose Select.
Contacts or Group Lists. Press
to
select a recipient.
Note: You can send one multimedia message
to a maximum of 10 recipients.
–
Images displays stored images on the phone.
9. Press
down to enter the Sound field and
press
to select Options. Choose:
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
29
•
•
Record Sound to instantly record a new sound
and attach it to your message.
To show CC/BCC: Select Menu → Messages →
Msg Settings → Show CC/BCC.
Media Gallery to display a list of categories
that contain saved or downloaded sounds and
voice memos.
Receiving multimedia messages
There are two settings for receiving a multimedia
message on your K323 phone: Auto receive
(default) and Prompt.
–
Highlight Saved Sounds.
Press to select Open.
Highlight a sound to add to the multimedia
message. Press to Select.
–
Auto receive mode
When a multimedia message is received, it is
automatically downloaded onto your phone.
Note: You may add only one new or stored
sound per multimedia message sent.
The alert “New Message(s)” appears along with
the text “Message Received. View now?”
10. Before sending your message, press
to
select additional Options. Choose:
•
•
To View the multimedia message, press
To view Later, press
.
–
Preview Message plays your multimedia
message prior to sending.
.
–
Save Message allows you to save your
multimedia message to the Drafts Folder
and send it later.
Add Address allows you to add additional
addresses to your multimedia message
prior to sending it.
Message Priority allows you to send
your multimedia message with Normal or
Urgent priority.
Note: If a multimedia message is received
during a call, then the phone downloads the
message approximately one minute after the last
key is pressed.
–
–
Prompt mode
When a multimedia message is received, your
screen displays the alert “New Message(s)” along
with the question “Retrieve Now?”
•
•
11. Press
to select Send. This will send your
To View the multimedia message, press
.
multimedia message.
Select Erase to never download the
multimedia message.
Hide or Show CC/BCC fields
You can choose to hide the copy and blind
copy fields.
To hide CC/BCC: Select Menu → Messages →
Msg Settings → Hide CC/BCC.
•
To view Later, press
.
Note: If a multimedia message is received during
a call, then the phone screen displays the alert
“New Message(s)” after the call ends.
30
Sending and Receiving Multimedia Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
To activate Prompt mode:
–
–
Lock Msg to avoid accidentally erasing it.
Message Info displays multimedia
message information (priority, sender,
subject, time sent and received, and
message size).
Play Video plays the video in the
multimedia message.
1. Select Menu → Messages → Msg Settings.
2. Highlight Auto Retrieve and press
.
3. Press
up or down to select Disabled and
press
.
–
–
Note: Selecting Disabled will prompt you for
download when a PIX alert is received.
Replay plays the multimedia message
again from the beginning.
–
–
Done exits the multimedia message.
Call initiates call to sender of
multimedia message.
Save Picture saves the currently
viewed picture embedded in the
multimedia message.
Save Video saves the video embedded in
the multimedia message.
Save Sound saves the current sound
embedded in the multimedia message.
Save Address extracts email addresses,
phone numbers, and/or URLs from the
sender information and multimedia
message body.
Save as QuickText saves the text in the
multimedia message to the QuickText list.
Save Message saves the multimedia
message to the Saved Folder on the phone.
Viewing multimedia messages
When you receive a multimedia message, a
appears on your phone’s screen and remains until
all messages are viewed. The message is stored in
the InBox until the full message has been
received, regardless of the auto receive or
prompt setting.
–
–
–
–
1. Press
the message is long, press
the entire multimedia message.
2. Press to select Options. Press
to View the multimedia message. If
down to view
down to highlight additional options for the
multimedia message (options vary according
to selection):
Note: The options available to you may vary.
Check with your service provider.
–
–
–
–
Mute to silence the message.
3. When you are finished viewing the multimedia
message, select Reply or press
Erase Msg allows you to delete the
currently displayed multimedia message.
Forward launches the message creation
screen, allowing you to forward the
multimedia message. The original address
will not be shown, nor will the graphic,
sound, and text fields.
.
–
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
31
7
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
My Banner
Voice Features
Add Voice Dial
Network
Data/Fax Calls
Vibe then Ring
Lights Only
Normal Sounds
Main Menu View
Color Themes
Wallpaper
Screen Saver
Backlighting
Auto-Hyphen
Language
Time/Date Format
Contrast
Brightness
Erase Voice Dial
Voice Training
Voice Wake-Up
Voice Answer
Expert Mode
Privacy Alert*
Set Phone Line*
Roam/Svc Alert
Roam Option
Digital/Analog
Location
Sounds
Ringer Volume
Ringer Type
Business Ringer
Personal Ringer
Roam Ringer
Flip Open
Flip Closed
Pwr On/Off Sound
Key Volume
Key Length
Key Sound
Messaging
Alerts
Signature
Accessories
Pwr Backlighting
Headset Ringing
Auto-Answer
Com Port Speed
TTY Device
Edit QuickText
Auto Retrieve
Hide CC/BCC
Callback Number
Text Msg Receipt
Pict Msg Receipt*
Save to Sent
Convenience
Airplane Mode
Open to Answer
Fast Find
Frequent List
Hold Call
Gamepad Keymap
Disable
Enable
Alerts
Auto-Erase
Smart Sound
Minute Alert
Earpiece Volume
Spkrphone Volume
1-Touch Dialing
Web Prompt
Call Guard
Default Text
Voicemail Num.
Security
Lock Phone
Limit Calls
New Lock Code
Erase Contacts
Emergency Numbers
*Not available on all phones. Check with your service provider.
32
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Shortcut to Vibrate Only mode
Press and hold
Turning sounds back on
Press and hold
Silencing all sounds
•
.
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
receive alerts (such as new messages), open or
close the flip, and when turning the phone on
or off.
•
.
Choosing ringers
Your Kyocera K323 phone has multiple ringers
you can choose to use for incoming calls.
You can silence all sounds and set the phone to
vibrate or light up when you receive calls
and alerts.
1. Select Menu → Settings → Sounds →
Setting the phone to vibrate or light up
Ringer Type.
1. Select Menu → Settings → Silent Mode.
2. Scroll down the list to hear the different rings.
2. Choose an option and press
:
You can also press
to select Options to
access ringers in your Saved Sounds folder.
–
Vibrate Only: The phone vibrates for the
duration of the incoming call or other
alerts. appears.
3. Press
to select one.
Note: Downloaded ringers are added to the end
–
Vibe then Ring: The phone vibrates for the
first 10 seconds and then rings for the
remainder of the incoming call alert.
appears.
of the standard list of ringers.
Assigning business and
personal ringers
–
–
Lights Only: The phone lights up for the
duration of the incoming call or other
alerts. appears.
Normal Sounds: The phone rings for the
incoming call or alert (in effect, returns
phone to a non-silent mode).
You can assign ringers to contacts classified as
Business or Personal in your Contacts directory.
Note: To classify a contact as Business or
Personal, see page 18.
1. Select Menu → Settings → Sounds.
2. Ηighlight Business Ringer or Personal Ringer
Note: The phone will ring when it is attached to
an external power source (such as a charger),
even if all sounds have been silenced.
and press
.
3. Select a ringer and press
.
You can also press
to select Options to
access ringers in your Saved Sounds folder.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Adjusting the earpiece volume
Setting sounds for your phone
To adjust the earpiece volume manually during a
You can set your phone to sound tones when you
open and close the flip and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are in a call, or if a
headset or hands-free car kit is attached to
your phone.
call, press
or
up or down.
To set the earpiece volume:
1. Select Menu → Settings → Sounds →
Earpiece Volume.
2. Press
right to increase the volume, or
Set sound when flip opens
1. Select Menu → Settings → Sounds →
Flip Open.
left to decrease the volume.
3. Press
to select Save.
Using smart sound
2. Scroll through the list to hear the sounds and
You can set a baseline volume that the phone uses
to automatically adjust the earpiece volume when
there is a change in the amount of noise around
you or the caller’s voice.
press
to select one.
Set sound when flip closes
1. Select Menu → Settings → Sounds →
Flip Closed.
•
Select Menu → Settings → Sounds →
Smart Sound→ Enabled.
2. Scroll through the list to hear the sounds and
press
to select one.
Adjusting the ringer volume
1. Select Menu → Settings → Sounds →
Set sound when phone powers on
or off
Ringer Volume.
2. Press
right to increase the volume, or
•
Select Menu → Settings → Sounds →
left to decrease the volume.
Pwr On/Off Sound → Enabled.
3. Press
to select Save.
–
To deselect this sound, select Disabled.
Adjusting speakerphone volume
1. Select Menu → Settings → Sounds →
Spkrphone Volume.
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringer volume as well as key tones.
2. Press
right to increase the volume, or
left to decrease the volume.
34
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
to select Save.
–
–
Vibrate & Remind, Beep & Remind, Fwy &
Remind, Game & Remind, Bloop &
Adjusting key tone volume
Remind, Winner & Remind, Zilofon &
Remind sets the phone to notify you once
when a new message is received and then
notify you again every five minutes. To stop
You can change the volume of the tones the phone
makes when you press the keys.
1. Select Menu → Settings → Sounds →
a reminder alert, press
to
Key Volume.
select Ignore.
Disabled turns off message alerts.
2. Press
right to increase the volume, or
left to decrease the volume.
3. Press
to select Save.
Using shortcuts
From the home screen, press
Setting key length
in one of four
directions to access three shortcuts and one
custom menu.
You can change the duration of the tones the
phone makes when you press the keys.
Up: Access your Custom Menu
Down: Access Recent Calls
Left: Launch Web Browser
Right: Record Voice Memo
1. Select Menu → Settings → Sounds →
Key Length.
2. Choose Normal or Long and press
.
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
Creating and updating your
custom menu
You can create a custom menu that contains your
favorite features. After you set up your menu,
1. Select Menu → Settings → Messaging →
Alerts.
simply press and hold
up to access it.
2. Select the type of alert: Message Alert,
1. Press and hold
up to launch
Page Alert, or Voicemail Alert.
Custom Menu.
3. Press
to select an option:
2. Select Edit.
–
Vibrate, Beep, Freeway, Game, Bloop,
Winner, Zilofon sets the phone to alert you
once when a new message is received.
3. Scroll through the available options and press
to select or deselect options.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
35
–
You may select more than one feature.
Items appear in alphabetical order in
the menu.
2. Select an option and press
.
–
Graphic displays icons of each menu item,
with its name at the bottom of the screen.
List displays a list of each menu item.
Wheel displays a rotating graphic image of
the menu items.
4. Press
to select Save.
–
–
Choosing a different language
Your phone may display alternative languages.
3. Press
to return to the home screen. The
1. Select Menu → Settings → Display →
next time you select Menu, you will see the
menu view you selected.
Language.
2. Select a language and press
.
Adjusting the backlighting
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the length of time that bright
backlighting remains on.
Personalizing the screen
Changing your banner
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
1. Select Menu → Settings → Display →
Backlighting → Duration.
1. Select Menu → Settings → Display →
2. Select an option and press
:
My Banner.
–
7 seconds, 15 seconds, or 30 seconds—
2. Press
to select Edit.
(Default) Turn backlighting on for 7, 15,
or 30 seconds after your last keypress.
7 sec. & in call, 15 sec. & in call, or 30 sec.
& in call—Turn backlighting on for the
duration of a call, and for 7, 15, or 30
seconds after your last keypress.
3. Press
to clear the screen.
–
4. Enter your new text.
5. Press
to select Save.
Choosing a menu view
Note: The “in call” settings drain the battery
more quickly.
Three menu views are available: Wheel, Graphic,
and List.
1. Select Menu → Settings → Display →
Main Menu View.
36
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Power Save Mode
Setting numbers to auto-hyphenate
You can conserve battery life by activating Power
Save mode to dim the backlight set in the
procedure above. The backlighting appears for
the selected duration but is less bright than with
Power Save off.
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
For example, 1-222-333-4444.
•
Select Menu → Settings → Display →
•
Select Menu → Settings → Display →
Backlighting → Pwr Save Mode → On.
Auto-Hyphen → Enabled.
Selecting a screen saver
Setting power backlighting
Screen savers appear on the home screen when
the flip is open or closed and are activated 10
seconds after the last keypress. Incoming calls
and alerts override screen savers.
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
Note: Power backlighting may not be available
with the optional desktop charger or other
accessories.
1. Select Menu → Settings → Display →
Screen Saver.
2. Highlight a screen saver and press
. The
Tip: Use the power backlighting as a night light
image displays.
when traveling.
3. Press
to assign the screen saver.
1. Select Menu → Settings → Accessories →
4. Press
to return to the home screen
Pwr Backlighting.
and wait 10 seconds to view the screen saver
you chose.
2. Select Always On to keep backlighting on.
Note: The battery charges more slowly when
Note: Downloaded screen savers are added to
power backlighting is on.
the end of the list.
Changing the display contrast
Selecting wallpaper
1. Select Menu → Settings → Display →
Wallpaper appears on the home screen.
Contrast.
1. Select Menu → Settings → Display →
2. Press
left or right to adjust the contrast
Wallpaper.
and select Save.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
37
2. Highlight a wallpaper design from the
Changing your lock code
standard list or press
to select additional
The lock code is typically 0000 or the last 4 digits
of your phone number.
Options.
–
–
Take Picture allows you to take a picture.
Camera Pictures allows you to select a
picture from your folder.
Images allows you to select an image from
your Image folders.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select New Lock Code. A message appears:
–
“Change Code?”
4. Press
digit code.
to select Yes and enter a new four-
3. Follow the prompts to save your selection.
4. Press to return to the home screen.
5. Enter your new lock code again.
Selecting a color theme
Locking your phone
You can select a color theme for the display
background of your phone.
When your phone is locked, you can call only
emergency numbers or your service provider’s
number. You can still receive incoming calls.
1. Select Menu → Settings → Display →
Color Themes.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
2. Scroll through the options to view the
color themes and press
to select one.
Choosing a different time/date format
1. Select Menu → Settings → Display →
Time/Date Format.
4. Highlight an option:
–
–
Never does not lock the phone.
On power up locks the phone every time
you turn it on.
2. Highlight an option and press
.
–
Now locks the phone immediately.
Creating a secure environment
5. Press
.
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
Unlocking the phone
1. From the home screen, press
to
select Unlock.
2. Enter your four-digit lock code.
38
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Limit All calls, both incoming and
outgoing.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
Erasing all contacts
You can erase all entries from your
Contacts directory.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Emergency Numbers.
4. Select an Unassigned slot.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
5. Enter the phone number, including the area
4. Select Yes to erase all contacts. A message
code. Do not enter 1 before the area code.
appears: “Erase ALL Contacts?”
6. Press
Notes:
to select Done.
5. Press
to select Yes to erase all contacts.
•
To make a call to an emergency number from
a locked phone, you must dial the number
(including area code) exactly as it was stored
in Emergency Numbers.
Network settings
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Limiting calls
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
your service provider’s numbers.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Limit Calls.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
4. Choose an option and press
:
–
–
No Limit limits no calls.
Limit Outgoing calls only. Incoming calls
1. Select Menu → Settings → Network →
can still be received and answered.
Set Phone Line.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
39
2. Select one of the two lines and press
.
2. Set the Com speed.
3. Select Menu → Settings → Network →
Data/Fax Calls.
Data Settings
4. Press
to select an option:
Setting Com port speed
–
–
Voice only allows only voice calls.
Fax, next call or Data, next call sets the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
Fax, until off or Data, until off forces the
phone into fax mode or data mode until
the phone is turned off.
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1. Select Menu → Settings → Accessories →
–
Com Port Speed.
2. Select the speed. The options are: 19.2 kbps,
115.2 kbps (default), 230.4 kbps, and Other.
Note: You cannot receive voice calls while the
phone is in data/fax mode.
Note: There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired. Note: Enable TTY only when
using the phone with a TTY device.
Setting the phone to receive data
or faxes
1. Connect the TTY device to the phone.
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
2. Enter
your keypad.
3. Press to select the TTY option.
from
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
4. Close the Information window by pressing
to select OK.
5. Highlight TTY On and press
.
Note: To purchase a cable, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
1. Connect the phone to the laptop or PC.
40
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (For example: 911, 111, 999,
and 000) in markets where service has been
implemented.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu → Settings → Network →
Location.
2. Select 911 Only or Location On.
–
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
–
Location On shares your position
information with your service
provider’s network, in addition to
emergency services.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
41
8
USING VOICE RECOGNITION
Voice recognition allows you to make and
answer calls by speaking commands into the
phone’s microphone.
3. Highlight the phone number and
select Options.
4. Select Add Voice Dial, Edit Voice Dial, or
Erase Voice Dial.
Note: You cannot use voice recognition to end a
call; you must press
when the flip is open.
5. Follow the prompts.
Setting up voice dialing
To make or receive calls using voice dialing,
contacts must be saved with associated voice tags.
Making a call using voice tags
1. If you haven’t already done so, record a voice
tag for the person you wish to call.
2. With the flip open, from the home screen,
Creating a voice tag for a contact
press
. The phone responds:
1. Press
to select Contacts.
“Say a name.”
2. Highlight the contact and press
.
3. Say the name of the person you want to call.
3. Press
down to highlight the number.
4. If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call, or
say No to cancel.
4. Press
to select Options.
5. Highlight Add Voice Dial and press
.
6. Follow the voice prompts. You will need to say
Note: If the phone finds multiple voice tags
that sound like the name you said, you will be
asked to verify which name you want to call.
Say Yes when you hear the correct name. Say
No when you hear an incorrect name.
the name twice.
Viewing entries with voice tags
•
Select Menu → Contacts → Voice Dial List.
A list of all contacts with assigned voice
tags appears.
5. When you are finished with the call,
open the flip and press
to end the call.
Editing a voice tag
Erasing voice tags
1. Select Menu → Contacts → Voice Dial List.
2. Highlight the contact to edit, and press
To erase all voice name dial recordings in
your phone:
.
42
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Menu → Settings → Voice Features →
–
–
Say “Cancel” to exit voice recognizer and
return to the home screen.
Erase Voice Dial.
2. Select Yes.
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Making a call using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Using voice features with
hands-free car kits
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1. From the home screen, press
. The phone
responds: “Say a name or say Dial.”
Note: The following features apply only to
installed hands-free car kits unless noted.
2. Say “Dial”. The phone responds:
“Speak a digit.”
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice
command to activate the phone to make a
phone call.
–
Say “Clear” to erase the last digit entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts
you with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
To activate the Voice Wake-up setting:
•
Select Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory.
–
–
Say “Call” to dial the number.
To wake up the phone:
Say “Verify” to cause phone to repeat the
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
set of digits that you input.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
43
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 44.
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
contact entry in your phone, then the phone will
say “Incoming call from (Name), answer?”
Answering the phone
You can set your hands-free car kit to (1) answer
automatically or (2) answer using a voice
command.
•
Say “Yes” or press any key except
.
Ignoring an incoming call
Answering automatically
To ignore an incoming call, do one of the
following:
You can set your phone to answer automatically.
Note: This setting also works with the portable
hands-free car kit.
•
•
Say “No” and press
to silence the alert.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
•
Select Menu → Settings → Accessories →
Auto-Answer → After 5 secs.
Answering using voice commands
Training voice recognition
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
If your phone is having trouble recognizing your
voice, you can train it with the commands Yes,
No, and Wake up.
•
Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
1. Select Menu → Settings → Voice Features.
2. Select Voice Training.
To activate the Voice Answer setting:
3. Read the message and press
to select OK
1. Select Menu → Settings →
and continue. Cancel returns you to the
previous screen.
Voice Features → Voice Answer.
2. Highlight Enabled and press
.
4. Select Train All or the item you want to train.
3. Select Menu → Settings → Silent Mode →
Normal Sounds, then press
5. Follow the prompts for each word until
.
training is complete.
44
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
9
USING THE CAMERA
Tips before operating your
camera
Setting up the camera for
photos
•
You cannot activate the camera while
on an active call or while browsing files in the
media gallery.
1. While in Camera mode, press
to
:
select Options.
2. Press
to select Settings.
•
•
Once the camera is active, the home screen
acts as the viewfinder.
3. Highlight an option and press
–
–
Flash options are On, Off, or Automatic.
Resolution options are 1280 x 1024 (best
for printing), 640 x 480, 320 x 240 (best
for sending to email), and 160 x 120.
Low Light Mode brightens the picture for
low light environments.
Self Timer options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
If you get a “Low memory” error, check your
resolution and quality compression settings.
See “Setting up the camera for photos” on this
page.
–
–
•
•
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Menu settings and options can only be
accessed when the camera is active.
automatically. Self Timer is not available
when Multishot mode is activated.
Accessing camera mode
•
Press
until you hear two beeps
–
–
Multishot allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken.
Shutter Sound sets the sound used when
the camera takes a picture.
to activate camera mode or select
Menu → Camera.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
45
–
White Balance allows the camera to adjust
for different lighting. Options are
Automatic, Fluorescent, Incandescent,
or Daylight.
Color Tone sets the color tone of
the picture.
Quality sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
LED flashes a light to indicate a picture
has been taken. Options are On (default)
and Off.
Menu options for camera mode
1. Press
2. Select Options.
3. Press up or down to scroll through the
options on the vertical menu bar:
to activate camera mode.
–
–
–
Settings displays available camera settings
you may set up prior to taking a picture.
Brightness allows you to adjust the
brightness of the image in the home
screen LCD.
–
–
–
–
Camera Pictures displays all pictures
taken and stored.
Last Picture displays the most recently
taken picture.
Frames allows you to add a frame or a
stamp to your picture. A frame or stamp
cannot be removed once it has been used
in a picture.
–
–
Viewfinder Display options are Fullscreen
and Actual.
Restoring camera menu settings
The following settings revert to the default
setting each time you enter and exit the
camera application:
Note: The picture resolution changes to
160 x 120 while taking pictures with frames.
The resolution returns to the original setting
once Frames is disabled.
•
Low Light Mode, Self Timer,
MultiShot, Viewfinder.
The following settings remain at the setting
you selected each time you enter and exit the
camera application:
•
Flash, Resolution, Shutter Sound, White
Balance, Quality, LED, and Save Location.
46
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press
when finished taking pictures.
Camera mode indicators
and icons
The camera mode displays the following onscreen
indicators and icons:
Camera key map
Flip open
Key
Camera
Menu Screen
Dismiss menu
options
Icon
Description
Flash on
Take picture
Select Capture Select OK
to take picture
Camera mode
Select Options Cancel, dismisses
menu
Top right corner
numbers
Number of
snapshots remaining
Up
Zoom in
Scrolls menu options
right
Zoom level
Down Zoom out
Scrolls menu options
left
Bottom left
corner numbers
Resolution setting
Takes picture Select menu option
Multishot
Self Timer
Taking a picture
1. Select Menu → Camera.
2. Focus on the image using the phone’s display
as the viewfinder.
Tip: If your camera setting is low resolution,
press
up or down to zoom in or
zoom out.
3. Take the picture using one of two methods:
Press or
4. Press to select Send or
select Erase.
–
.
to
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
47
10 USING MEDIA GALLERY
The Media Gallery stores camera pictures,
images, and sounds in the phone and displays
those files on the phone’s screen.
–
–
Assign picture as a Caller ID or
as wallpaper.
Modify options are Rotate, Resize,
Brightness, Sharpness, Saturation, Hue,
Auto Adjust, Color Tone. Only unlocked
pictures can be modified.
Zoom allows you to zoom in or out on
the picture.
Send to Online allows you to upload a
photo or other content to a server. *Not
available on all phones. Check with your
service provider.
Take Picture to snap another photo.
Lock to prevent accidentally erasing
the photo.
Rename the photo.
Details of the file.
Accessing files
1. Select Menu → Media Gallery.
2. Select an option:
–
–
–
–
Camera Pictures displays thumbnails of
the photos you have taken in
chronological order.
Images displays a list of categories that
contain preloaded, downloaded, saved, or
created files such as wallpaper, screen
savers, or caller IDs.
–
–
–
Sounds displays a list of categories that
contain saved or downloaded sounds such
as ringers and voice memos.
–
–
Browsing images
The images menu allows you to assign your files
to various applications.
Browsing pictures
1. Select Menu → Media Gallery →
Camera Pictures.
1. Select Menu → Media Gallery → Images.
2. Highlight a picture and press
to
select View.
2. Highlight an option and press
:
3. Press
multimedia messaging application or
press to select Options:
Erase the image.
to select Send and launch the
–
–
–
Saved Images displays available images.
Wallpapers displays wallpaper selections.
Screen Savers displays available
screensavers.
–
48
Using Media Gallery
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Caller IDs displays pictures and images
saved and the text IDs you assigned them.
Doodles saved from Doodler.
–
–
Ringers contains ringers saved on
your phone.
Voice Memos contains voice memos you
made to yourself.
3. Highlight a display and press
to select
View.
3. Press
to select Options.
4. Press
to select Send and launch the
4. Highlight an option and press
multimedia messaging application.
(options vary according to selection):
- or -
Press
–
–
Play to review the sound.
Record New allows you to record
new sounds.
to select Options (options vary
according to selection):
–
Send to Online allows you to upload a
photo or other content to a server. *Not
available on all phones. Check with your
service provider.
Set as Default to assign the image as a
wallpaper or screen saver.
Assign to assign the image to a contact.
Erase the image (image must not
be locked).
Details gives you the file size of the image.
Erase All erases all images stored (images
must not be locked).
–
–
Erase the sound.
Lock to prevent accidentally erasing
the sound.
Rename allows you to rename the
sound file.
Details gives you the file size of the sound.
Erase All erases all sounds stored.
Send to Online allows you to upload a
photo or other content to a server. *Not
available on all phones. Check with your
service provider.
–
–
–
–
–
–
–
–
–
–
Assign to assign the image to a contact.
5. Select Close or press
when done.
5. Select Close when done.
Browsing sounds
1. Select Menu → Media Gallery → Sounds.
2. Highlight an option and press
Saved Sounds contains sounds saved on
your phone.
:
–
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
49
11 USING TOOLS AND GAMES
Naming a saved voice memo
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
2. Highlight the memo and select Options.
Recording a voice memo
1. Select Menu → Tools & Games →
Voice Memo → Record New.
-or-
3. Select Rename.
4. Press and hold
to clear the
default name.
5. Use the keypad to enter a name for the memo.
Press and hold
right.
6. Select Save.
2. Say your memo and press
to select Stop.
3. Select Save to save your memo.
Erasing a saved voice memo
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
Note: If an incoming call is received while you’re
recording a memo, the memo is saved and the
incoming call screen appears.
2. Highlight the memo and select Options.
3. Select Erase. The prompt “Erase file?”
Playing or reviewing a voice memo
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
appears.
4. Select Yes or No.
2. Highlight the voice memo to review and
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
select Play.
3. Press
and press
right and left to select a function
to perform it:
Play
Creating an event
1. Select Menu → Tools & Games →
Scheduler → Add New Event.
Stop
Pause
2. Enter a name for the event and press
down. For help entering text, see page 15.
50
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select Options and classify the type of event
and press : Meeting, Phone Call,
–
Select No or During Event and
press
.
Birthday, Anniversary, Vacation, Medical, or
Other.
10. Press
to select whether or not this is a
recurring event.
Select an option and press
Daily, Weekly, Monthly, or Annually.
11. Select Save.
4. Press
to change the date of the event
(the current date is the default date of the
event).
–
: No,
–
–
–
Press
left or right to move between
Editing, erasing, or sending an event
1. Select Menu → Tools & Games →
Scheduler → View Month.
the month, day, and year fields.
Press
month, day, or year.
Press
up or down to change the
to save your changes.
2. Press
up, down, left or right to highlight
the day with the event to view, edit, or erase
5. Press
to set the time of the event.
and press
3. Press
and press
4. Press
.
–
–
–
Press
left or right to move between
up or down to highlight the event
.
the hour, minute, and AM/PM fields.
Press
hour, minute, or AM/PM.
Press to save your changes.
up or down to change the
to select Options.
5. Select Edit, Erase, or Send and press
.
6. Press
to set the duration of the event.
left or right to move between
–
–
–
For more information about editing the
event, see “Scheduler” on page 50.
To erase the event, highlight Erase and
–
–
–
Press
the hour and minute fields.
Press up or down to change the
hour and minute.
Press to save your changes.
press
. Press
to confirm.
For more information about sending the
event, see “Sending and Receiving Text
Messages” on page 22.
7. Press
to set a reminder of the event.
–
Select an option and press
.
Alarm Clock
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
8. Press
–
to set the reminder sound.
Select an option and press
.
9. Press
to select a Silent Mode setting
Note: The alert occurs only if the phone is on.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
51
3. Select an option and press
: 5 minutes,
Setting an alarm clock
1. Select Menu → Tools & Games →
Alarm Clock.
15 minutes (default), 30 minutes, or 60
minutes. A message appears telling you the
QuickAlarm is On.
2. Highlight one of the alarms and select Set.
4. When the alarm rings, select Off to turn off the
3. Use the phone keypad to enter numbers and
alarm or Reset to set the QuickAlarm again.
to switch between AM and PM.
–
Press
hours, minutes, and AM/PM fields.
Press up or down to change the
hours, minutes, and AM/PM options.
4. Press to set the time of the alarm.
5. Select Options to set the alarm sound.
6. Highlight an option and press
7. Select Options to set the recurring time.
8. Highlight an option and press
9. Enter a note for the alarm and press
10. Press to select Save and set the
alarm(s).
left or right to move between
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include with a bill.
–
1. Select Menu → Tools & Games →
Tip Calculator.
2. Enter the amount of your bill.
.
3. Select Next.
4. Select the amount you want to include as a tip
(10%, 15%, 18%, 20%, Other) and press
. Your total bill appears, including tip.
.
.
5. To split the bill, press
to select Split.
6. Press to clear the default of 2 guests.
11. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
7. Enter the number of guests and press
select Next. The amount each guest pays is
calculated.
to
Note: Opening the flip turns off the alarm.
8. Select Done.
Setting the QuickAlarm
1. Select Menu → Tools & Games →
Alarm Clock.
Calculator
Use the calculator for basic
mathematical equations.
2. Highlight QuickAlarm and select Set.
1. Select Menu → Tools & Games → Calculator.
2. Use the keypad to enter numbers.
52
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use
to select mathematical operations:
3. Select Start to begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
Left
Up
x (multiply)
÷ (divide)
+ (add)
Right
4. Press
Enter 5, press
then press
Down
- (subtract)
4. Select Sound to set the alarm sound and
to calculate the result. Example:
press
.
left to select X, enter 2,
to obtain the result of 10.
5. Press
or
to silence the alarm.
5. Press
- or -
to return to the home screen.
Stopwatch
1. Select Menu → Tools & Games →
Stopwatch.
Press
to clear the screen.
2. Select Start to begin counting.
Select Stop to stop counting.
Options
Adds displayed digit to the value
stored in memory.
Select Reset to clear the counter.
M+
MR
MC
Displays currently stored value on
screen.
Games
The games in this section may not be available
on your phone. Check with your service provider
for availability.
Clears value currently stored in
memory.
If you receive an incoming call alert while you are
playing a game, the game is paused and exited.
You can return to play once the call alert ends.
Games do not remain paused if the phone is
turned off or loses power.
Timer
This timer counts down for a specified amount
of time. It beeps when that amount of time
has elapsed.
1. Select Menu → Tools & Games → Timer.
2. Select Set.
Gamepad Keymap setting
If you have purchased a Kyocera Gamepad, this
setting allows you to modify the gamepad keymap.
–
Press
to move the cursor left
or right.
Press
minutes, and seconds.
1. Connect the Kyocera Gamepad to the phone.
–
up or down to set the hours,
2. Select Menu → Settings →
Gamepad Keymap.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
53
–
–
Edit allows you to modify the gamepad key
mappings.
Reset resets the gamepad to the factory
default settings.
1. Select Menu → Tools & Games → Race 21.
2. Press to select Yes at the prompt, “Turn
off backlight to conserve battery?”
3. Select New Game. The first card to be placed
is shown at the top left of the screen. Press a
key to add a card to the row as follows:
To purchase a Gamepad, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
Add cards to the first row
Add cards to the second row
Add cards to the third row
Add cards to the fourth row
Brick Attack
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of
the screen.
Shortcut: Press
left or right to choose
arrows at the bottom of the screen then press
to add cards to corresponding rows.
1. Select Menu → Tools & Games →
Brick Attack.
2. Press
to select Yes at the prompt, “Turn
Note: Each time you place a card, a new card
appears for placement.
off backlight to conserve battery?”
3. Press
to select New.
4. Continue placing cards until you are satisfied
–
To pause the game, press
press to Resume.
To move the paddle, press
or right.
To exit the game, highlight Exit and
, then
with your selections.
–
–
–
You can pause or end the game at any time
by pressing
You lose points each time you exceed 21
in a column.
–
–
left
.
press
.
Select Skip to skip one card per round.
5. Press
to select
to get your score
Race 21
and advance to the next round.
This game is a timed variation of Black Jack. Each
game comprises three 90-second rounds. To
score points, add cards in each of the four
columns, trying to reach but not exceed 21 in
each column during the course of the game.
6. Select an option and press
to select it.
–
New Game initiates game play. To pause
the game, press . From here you
can choose Resume, New or Quit.
54
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Resume Game returns you to the game
you were last playing.
Scoreboard provides you with the top
five scores.
To Navigate: Use the following keys to doodle.
To:
Use:
Select Options
Clear screen
7. Press
to end all games.
Shortcut to Colors & Tools
Draw, erase, or move cursor/
shape UP
Doodler
You can create and save graphics on your phone.
up
Draw, erase, or move cursor/
shape DOWN
1. Select Menu → Tools & Games → Doodler.
down
left
2. Select New Doodle to open the drawing screen
The cursor is located in the middle of
the screen.
Draw, erase, or move cursor/
shape LEFT
3. Select Options to choose the Colors, Tools,
Draw, erase, or move cursor/
shape RIGHT
right
Lines, or Shape you want to use.
4.Use keys 1–9 or to move
the cursor around the
screen as indicated.
Return cursor to center
Previous screen
5.When finished, select
Options → Save. The
image is saved to
Saving a doodle
Media Gallery.
To move the cursor away from the drawing:
It is a good idea to save the doodle while you are
working on it. If you receive a call while creating
an unsaved doodle, it will be lost.
1. Select Options → Colors and Tools.
•
Select Options → Save. The image will be
saved in Menu → Media Gallery →
Images → Doodles.
2. Select
then Done.
3. Press a number key to move the cursor.
To erase part of a drawing:
1. Select Options → Colors and Tools.
2. Select then Done.
3. Press a number key to move the eraser.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Resuming a doodle
To return to another saved doodle:
Select Menu → Tools & Games →
Doodler → Resume Doodle.
- or -
Select Menu→ Media Gallery →
Images → Doodles.
56
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
®
12 USING BLUETOOTH WIRELESS TECHNOLOGY
®
The Bluetooth wireless technology on your
Setting up Bluetooth wireless
technology on your Kyocera
phone
When you turn Bluetooth On the first time, you
will be prompted to do a device search. Follow
the same procedure as for Find New.
Kyocera K323 phone enables wireless connectivity
with accessories such as portable or installed
hands-free car kits, headsets, handsets,
computers, PC cards and adapters, PDAs,
and speakers.
Not available on all phones. For details check with
your service provider.
1. Select Menu → Bluetooth → ON/OFF.
2. Select one of the following:
Note: You must use a Bluetooth wireless
technology device (compatible with Class 2
Bluetooth wireless technology, version 1.2) in
order to use this phone wirelessly. Bluetooth
wireless technology accessories have the
symbol.
–
On Invisible hides your phone for all
devices except those listed in My Devices
(recommended setting).
–
On Visible allows other devices to find
your phone.
Note: Setting Bluetooth to Off prohibits your
phone from being used with any Bluetooth
wireless technology device. To prolong battery
life, it is recommended to set Bluetooth to Off
when you are not using it.
Pairing
You must first “pair” your phone with the
Bluetooth wireless technology enabled device to
allow your phone to communicate with it. Refer to
the instructions for setting up Bluetooth wireless
technology (below) in conjunction with the user
guide provided with your Bluetooth wireless
technology device.
3. Prepare the Bluetooth wireless technology
device (Bluetooth accessory) for pairing as
described in the other device’s user guide.
4. Select Menu → Bluetooth → My Devices.
5. Select Find New.
6. Your phone will search and detect visible
Bluetooth wireless technology enabled devices
in the vicinity.
7. Press
to select Add.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
57
8. Select the device with which you wish to pair
Connecting and disconnecting
to a Bluetooth wireless
technology device
Before you can use the Bluetooth wireless
technology functions of your phone, you must set
your phone to be ready to communicate with a
device. This is called “connecting.”
with your K323 phone from the menu and
press
to select Add.
Note: When pairing is initiated from another
Bluetooth wireless technology device, you will see
the prompt “Device <device name> requests to
connect using Bluetooth. Accept/Reject?”.
9. Enter the password provided in the Bluetooth
Connecting to a Bluetooth wireless
technology device
wireless technology device’s user guide, if
necessary, and press
to select OK.
To connect your phone to an audio Bluetooth
wireless technology device:
1. Select Menu → Bluetooth → My Devices.
2. Scroll to the device and press
to
select Connect.
3. A message on the phone tells you that your
device is connected.
4. You are now ready to use the device with
your phone.
Disconnecting from the Bluetooth
wireless technology device
The phone waits for the Bluetooth wireless
technology device to respond.
1. Select Menu → Bluetooth → My Devices.
10. The Bluetooth wireless technology device is
added to My Devices.
2. Scroll to the device and press
to
select Disconnect.
Bluetooth wireless technology
settings
You can change/review the information about
each device you have set up on your phone.
58
Using Bluetooth® Wireless Technology
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Select Menu → Bluetooth → My Devices.
Visible Duration
2. Scroll to the device and press
Options.
to select
You can set the time that your K323
remains “visible” to other Bluetooth wireless
technology devices.
3. Use the following options to:
1. Select Menu → Bluetooth → Settings →
–
–
Rename the device
Delete the device from your phone if you
are no longer going to use it
Visible Duration.
2. Select one of the following:
–
Services view a description of the device
(such as Headset, HandsFree, Object
Push, and Serial Port)
–
–
–
1 minute: your phone will remain
On Visible for 1 minute before returning
to On Invisible.
3 minutes: your phone will remain
On Visible for 3 minutes before returning
to On Invisible.
Deleting a device
You can delete a Bluetooth wireless technology
device from your K323 phone if you will not be
using it any longer:
Always: the On/Off setting leaves your
phone On Visiable continuously.
1. Select Menu → Bluetooth → My Devices.
Services
2. Scroll down to the device you would like
to remove.
You can view a list of the available Bluetooth
wireless technology service protocols supported
by your Kyocera K323 phone:
3. Press
4. Scroll down to select Delete and press
5. Press to delete or to cancel.
to select Options.
1. Select Menu → Bluetooth → Settings →
Services.
Renaming your phone’s Bluetooth
identification
2. A list of supported service protocols is listed.
3. Press
to return to the
You can change the name of your phone to
identify it when pairing with various devices.
BT Settings menu.
1. Select Menu → Bluetooth → Settings →
My Name.
2. Enter the new name in the text field and press
to Save.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
59
13 CONNECTING TO THE INTERNET
–
–
An underline and an arrow indicate that
Using the Web Browser
there is more text. Press
view more text. Press
the previous screen.
down to
to return to
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
To choose a site, highlight it and press
to select Go.
Note: You cannot receive incoming calls while
you are using Web Browser.
4. When you have finished using the Internet,
press to exit the Web Browser.
Launching the Web Browser
Using the Web menu options
1. Select Menu → Web Browser.
The following options may appear on your screen:
A message about airtime fees appears every
•
Home returns you to the main Web Browser
time you start the browser.
window, or home page.
For more information about how airtime is
charged, contact your service provider.
•
•
•
Mark Site saves the current location as a
bookmark for easy access.
2. Press
to continue.
Bookmarks displays a list of your saved
Web sites.
If this is the first time you have connected
to the Internet, a message informs you
that security is not yet enabled for your
Web Browser.
Setup gives you options for changing how
information is displayed.
–
–
Show URL displays the entire URL.
About Openwave displays information
about your Web Browser version.
Encryption should not be used unless you
are instructed to do so by your service
provider.
UP.Link selects a different browser server.
You can use this option if you have more
than one Web Browser account.
3. Press
to select Yes to enable security.
When you are connected, a browser home
page appears. It has a list of bookmarks and
some Web menu options at the bottom of
the screen.
–
–
–
A
appears in a secure session.
60
Connecting to the Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Restart restarts the Web Browser.
Searching for a Web site
How you search for a Web site depends on
your service provider. For more information,
contact your service provider.
Going to a bookmarked site
1. Select Menu → Web Browser. If you see a
message prompt, press
to continue.
2. From your Web home page, select
Bookmarks. A list of bookmarks appears.
3. Enter the number corresponding to the
bookmark you want and press
.
Checking Net alerts
Alerts received from a Web site are sent to your
Browser Alerts inbox.
1. Select Menu → Messages → Browser Alerts.
This action launches the browser inbox.
2. Press
to accept browser fees.
3. Select an alert and follow the prompts.
Setting a Web Prompt
Allows you to set a prompt to confirm start or exit
of the internet browser.
Select Menu → Settings → Convenience →
Web Prompt.
Select an option and press
.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
61
14 GETTING HELP
India:
Toll free#: 1-600-121214
Toll#: 0124-284-5000
Customer support
Your service provider’s customer support
Mexico:
001-866-650-5103
department may be accessible directly from your
phone when you dial a number, such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail.
New Zealand: 0-800-990-100
Panama:
Peru:
001-800-201-1984
0-800-51-934
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
For questions about the phone features, refer to
the materials provided with your phone, or visit
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
•
•
The name of your service provider.
The actual error message or problem you
are experiencing.
•
•
•
Web site: www.kyocera-wireless.com
Email: [email protected]
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401.
–
To locate the ESN select Menu →
Phone Info → Build Info and scroll down
to ESN: for the 11-digit number.
•
Customer support phone numbers are also
available in the following countries:
Argentina:
Australia:
Brazil:
0-800-666-0052
1-800-507-000
0-800-55-2362
800-43-1212
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Chile:
Colombia:
01-800-700-1546
62
Getting Help
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone accessories
To shop for K323 phone accessories, visit
www.kyocera-wireless.com/store. You may also
call us at 800-349-4188 (U.S.A. only) or
858-882-1410.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones,
visit beta.kyocera-wireless.com.
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
63
INDEX
Numerics
1-Touch dialing, 11
renaming an accessory, 59
setting up, 57
technology enabled accessory,
58
display contrast, 37
Doodler, 55
turning on and off, 57
A
Brick Attack, 54
Alarm Clock, 7
alarm clock, 51
alerts
for messages, 35
for missed calls, 10
analog mode, 7
auto-hyphenation, 37
C
E
emergency
calculator, 52
call counters, 12
callback number, 23
calls
calls, 12
emergency mode, 12
exit emergency mode, 12
position location, 7, 41
erasing
answering, 8
missed, 10
B
contact entries, 20, 39
phone numbers, 20
text messages, 26
redialing, 9
banner, 36
battery, 1
blocking outgoing calls, 39
Bluetooth wireless technology
invisible, 57
services available, 59
visible, 57
Bluetooth wireless technology
enabled device
camera
menu options, 46
sending a picture, 29
setting up, 45
F
fast find, 21
fax mode, 40
taking a picture, 47
color themes, 38
Com Port speed, 40
connect a Bluetooth wireless
technology enabled accessory,
58
contacts directory, 18
contrast, 37
countdown timer, 53
custom menu
finding contact information, 21
finding new Bluetooth wireless
technology enabled
accessories, 57
connecting a Bluetooth
wireless technology enabled
accessory, 58
frequent contacts, 21
G
connecting and disconnect-
ing, 58
games
Brick Attack, 54
Doodler, 55
Race 21, 54
deleting an accessory from
your phone, 59
creating, 35
determine duration of visi-
bility, 59
D
H
data/fax setup, 13, 40
deleting a Bluetooth wireless
technology enabled accessory
from your phone, 59
digital mode, 7
disconnecting a Bluetooth
wireless technology enabled
accessory, 58
hands-free car kit
answering using voice, 44
purchasing, 63
hands-free headset
jack, 4
find new device, 57
pairing, 57
disconnect a Bluetooth wireless
64
Download from Www.Somanuals.com. All Manuals Search And Download.
purchasing, 63
hard pause, 18
power save mode, 8
symbol mode, 16
Q
T
QuickAlarm, 52
QuickText, 23, 27
technical support, 62
text entry, 15
quick reference, 17
text messages, 22
time format, 38
timer, 53
timing calls, 12
tip calculator, 52
TTY/TDD, 40
I
icons, 7
contacts, 19
messages, 25
InBox, 26
R
Race 21, 54
recent call icons, 10
renaming a Bluetooth wireless
technology enabled accessory,
59
L
language, 36
lights
lights-only mode, 7, 33
resetting the phone, iv
ringers
limiting calls out, 39
list of compatible Bluetooth
wireless technology enabled
accessories, 59
lock code, 38
locking
U
choosing types, 33
for contacts, 18
for roaming calls, 14
silencing, 6
unlocking the phone, 38
V
vCard, 20
vibrate, 7, 33
visible duration period for
Bluetooth wireless technology,
59
volume, 34
phone, 38
roaming, 7
alerts, 13
controlling, 13
ringer, 14
M
memory
saving, 26
menu view, 36
Voice Answer, 44
voice dialing, 42
voice memo
erasing, 50
S
scheduler, 50
N
screen contrast, 37
screen icons, 7, 15, 25, 33
screen savers, 37
secret contacts, 11, 20
security, 38
naming, 50
number mode, 15
recording, 50
voicemail, 12
setting up, 6
volume
O
OutBox, 25
P
Pairing phone with Bluetooth
wireless technology enabled
device, 57
earpiece, 8, 34
key beep, 35
ringer, 34
sent messages, 24
setting up Bluetooth wireless
technology enabled device, 57
silent mode, 7, 33
smart sound, 34
smiley mode, 16
speed dialing, 11
stopwatch, 53
phone numbers
W
wallpaper, 37
Web Browser, 60
erasing, 20
verifying your own, 6
phone, unlocking, 38
position location, 7, 41
User Guide for the Kyocera K323 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
|