Download from Www.Somanuals.com. All Manuals Search And Download.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.*
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6 watts/
kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
Caution
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value.
The user is cautioned that changes or
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a wireless base station
antenna, the lower the power output.
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to
optimize the performance and life of your phone
and battery.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Air bags
If your vehicle has an air bag, DO NOT place
installed or portable phone equipment or other
objects over the air bag or in the air bag
deployment area. If equipment is not properly
installed, you and your passengers risk
serious injury.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and can be
found under the Display Grant section
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
http://www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFKWC-K24.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
•
•
•
Do not carry your phone near your heart.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
They include:
Use the ear opposite the pacemaker.
If you have any reason to suspect that
interference is taking place, turn off your
phone immediately.
•
•
•
fueling areas such as gas stations
below deck on boats
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to
discuss alternatives.
transfer or storage facilities for fuel or
chemicals
•
•
•
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
any other area where you would normally be
advised to turn off your vehicle engine
Use with care
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals
and health care facilities may be using equipment
that is sensitive to external RF energy.
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
Potentially unsafe areas
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
Resetting the phone
Aircraft—FCC regulations prohibit using your
phone on a plane that is in the air. Turn your phone
off or switch it to Airplane Mode before
boarding aircraft.
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
1. Remove the battery door.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas—Turn off your phone where blasting
is in progress. Observe restrictions, and follow any
regulations or rules.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Frequency (RF) energy
Battery and charger specifications
Charger Input
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
Output
CV90-G2968-01 120VAC 60Hz 7W
CV90-G2588-01 100-240VAC 50/60Hz 0.2A
CV90-G2589-01 100-240VAC 50/60Hz 0.3A
Standard Battery:
5.2VDC 400mA
4.2VDC 0.6A
4.5VDC 1.2A
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the
CV90-P3031-01 3.7V 900mAh
Extended Battery:
CV90-P3032-03 1800mAh
following reports:
•
ANSI C95.1 (American National Standards
Institute, 1992)
Kyocera Wireless Corp.
•
NCRP Report 86 (National Council on
Radiation Protection and
Measurements, 1986)
10300 Campus Point Drive, San Diego, CA 92121
U.S.A.
Visit us at www.kyocera-wireless.com
•
ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
v
CONTENTS
Setting sounds for your phone . . . . . . . . . . . . . 36
Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 38
Personalizing the screen. . . . . . . . . . . . . . . . . . 39
Creating a secure environment . . . . . . . . . . . . . 41
Setting position location . . . . . . . . . . . . . . . . . . 43
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1
Getting to know your phone . . . . . . . . . . . . . . . . 3
2
Making and Answering Calls . . . . . . . . . . 9
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Silencing an incoming call . . . . . . . . . . . . . . . . 10
Using the speakerphone . . . . . . . . . . . . . . . . . . 10
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 13
Understanding roaming. . . . . . . . . . . . . . . . . . . 14
Using your phone in an airplane . . . . . . . . . . . . 15
8
9
Using Voice Recognition . . . . . . . . . . . . 44
Setting up voice dialing. . . . . . . . . . . . . . . . . . . 44
Making a call using voice tags. . . . . . . . . . . . . . 44
Making a call using digit dialing . . . . . . . . . . . . 45
Training voice recognition . . . . . . . . . . . . . . . . 47
Using the Camera . . . . . . . . . . . . . . . . . . 48
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 50
Camera key map. . . . . . . . . . . . . . . . . . . . . . . . 50
3
4
Entering Letters, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . . 17
Storing Contacts . . . . . . . . . . . . . . . . . . . 20
Creating a new contact . . . . . . . . . . . . . . . . . . . 20
Adding a code or extension. . . . . . . . . . . . . . . . 20
Customizing your contacts. . . . . . . . . . . . . . . . . 20
Editing a contact . . . . . . . . . . . . . . . . . . . . . . . . 22
Erasing a contact. . . . . . . . . . . . . . . . . . . . . . . . 22
Customizing a phone number . . . . . . . . . . . . . . 22
Finding contact information . . . . . . . . . . . . . . . 23
10 Using Media Gallery . . . . . . . . . . . . . . . . 52
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . 52
11 Using Tools and Games . . . . . . . . . . . . . 54
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 56
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5
6
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . . 24
Sending text messages. . . . . . . . . . . . . . . . . . . . 24
Retrieving text messages . . . . . . . . . . . . . . . . . . 28
Customizing message settings . . . . . . . . . . . . . . 29
12 Connecting to the Internet . . . . . . . . . . . 61
Using the Web Browser. . . . . . . . . . . . . . . . . . . 61
Sending and Receiving Multimedia
13 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 63
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Messages . . . . . . . . . . . . . . . . . . . . . . . . . 31
Sending multimedia messages. . . . . . . . . . . . . . 31
Receiving multimedia messages . . . . . . . . . . . . 32
Viewing multimedia messages. . . . . . . . . . . . . . 33
7
Customizing Your Phone . . . . . . . . . . . . 35
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 36
Choosing ringers. . . . . . . . . . . . . . . . . . . . . . . . 36
vi
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GETTING STARTED
Installing the battery
Your Kyocera K322 phone comes with a
removable lithium ion (LiIon) battery. Fully charge
the battery before using the phone.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
Note: You must use a Kyocera-authenticated
battery in your phone. If you attempt to use a
battery that has not been authenticated you will
receive a security warning. Contact your service
provider to obtain a Kyocera-authenticated battery.
1. Connect the AC adapter
to the jack on the bottom
of the phone.
2. Plug the adapter into a
wall outlet.
To install the battery:
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
1. Hold the phone
face down.
•
•
•
Charging (the icon is animated)
Partially charged
2. Place your thumb on the
ribs at the top of the
battery door and slide the
battery door downward to
remove it.
3. Place the battery in the
phone casing with the
metal contacts facing
towards the bottom end
of the phone.
4. Replace the battery door
by sliding the notches
into the openings at the
bottom and outside edges
of the battery casing.
5. Slide the door up to secure the cover
into place.
Fully charged
Note: The battery will not charge if you use the
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note: To remove the battery, make sure the phone
is powered off.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Caring for the battery
Accessing keypad shortcuts
General safety guidelines
Navigation key
shortcuts
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
From the home screen, press the navigation key in
one of four directions to access three shortcuts
and one custom menu (see page 38 for
If you have not used the battery for more than
a month, recharge it before using your phone.
Avoid exposing the battery to extreme
temperatures, direct sunlight, or
high humidity.
instructions on setting up your custom menu).
•
Never dispose of any battery in or near a
fire. It could explode.
Common causes of battery drain
•
•
•
•
•
Playing games or using the Web.
Playing music files.
Taking pictures with the flash on.
Keeping backlighting on.
Operating in analog ( ) mode. Your phone
switches between modes to find the best
signal. To set your phone to operate in a single
mode, select Menu → Settings → Network →
Digital/Analog.
•
Operating in digital mode when far away from
a base station or cell site.
•
•
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted alerts.
2
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to know your phone
The phone is shown here in open position. You must open the flip to use the keys on the lower portion of
the phone. When the phone is closed, the keys are locked to prevent accidental key presses.
Home screen.
1
2
Speakerphone key activates the speakerphone and answers
incoming calls.
Left softkey accesses menus and functions.
3
4
Send/Talk key starts or answers a call. Press once to activate
voice dialing, twice to display the Recent Calls list, and three
times to redial the last number dialed.
Keypad for entering numbers, letters, or symbols.
*/Shift key changes the text mode in text entry.
5
6
7
8
0/Next key cycles through word choices during text entry.
Right softkey accesses the Contacts directory and other
menu options.
Navigation key scrolls through lists and text entry fields and
9
accesses shortcuts from the home screen.
OK key selects a menu item or option.
10
11
End/Power key turns the phone on and off, ends a call or
browser session, and returns you to the home screen.
BACK key erases characters in text entry and returns you to
the previous screen.
Space/# key enters a space during text entry. Press and hold to
12
13
activate or deactivate Silent mode.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Jack for Hands-free Headset only (sold separately).
14
15
16
Volume key to raise or lower ringtone volume.
Camera key activates Camera mode. To activate Camera
mode, press and hold until you hear two beeps.
Camera lens.
17
18
Camera Flash/Message Indicator Light light flashes when
taking a picture or lights when you have a message or
missed call.
External screen displays time, caller ID, signal and
battery strength.
19
20
Jack for AC adapter (included) and data cable
(sold separately).
Warning: Inserting an accessory into the incorrect jack will damage the phone.
4
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menus
The contents of the main menu are as follows:
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Recent Calls Timer OutBox*
All Calls Timer
Contacts
View All
Messages
New Text Msg
Voicemail
InBox
Browser Alerts*
Sent
Media Gallery
Camera Pictures
Images
Sounds
Settings
Silent Mode
Sounds
Tools & Games Web Browser
Brick AttackTM
Race 21TM
DoodlerTM
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Connects to Internet
Phone Info
Build Info
Icon Keys
BREW Apps**
Display
Saved
Drafts
Convenience
Voice Features
Messaging
Security
Msg Settings
Group Lists*
Erase Messages
Camera
Launches the camera Accessories
Gamepad Keymap
Add New
Stopwatch
View Groups*
Speed Dial List
Voice Dial List
Network
*Not available on all phones. Check with your service provider.
** Menu name varies by service provider.
Accessing menu items
•
•
Press
From the home screen, press
select Menu or press to select Contacts.
Press left, right, up, or down to see
menus and options.
to view the home screen.
In this guide, an arrow → tells you to select an
option from a menu.
to
For example, Menu → Settings means select
Menu, then select the Settings option.
•
Note: To change the way the menus appear, see
“Choosing a menu view” on page 39 for details.
•
•
Press
Press
to select a menu item.
to back up a menu level.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Performing basic functions
Note: The phone must be powered ON to perform the following functions.
To...
From the home screen...
Turn the phone on
Press
and wait until the phone plays a sound.
Turn the phone off
Make a call
Press and hold
until the phone plays a sound.
or press to initiate voice
Enter the number and press
dialing. Contact must have voice tag assigned (see page 44).
End a call
Press
Press
Press
Press
.
.
Answer a call
Adjust volume during a call
Acknowledge an alert
up or down.
when you see OK.
Silence the ringer on an
incoming call
Press
or
then
to answer.
Access voicemail
Access menus
Press and hold
and follow the system prompts.
Press
Press
Press
once.
once.
Access Contacts list
Scroll menus
up and down.
Select menus
Highlight a menu or option and press
Press and hold down.
once.
Access Recent Calls list
Activate Camera mode
Press and hold the side camera key
select Capture to take a picture.
. Focus on the image and
6
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
To...
From the home screen...
Launch the browser
Press and hold
Press and hold
Press and hold
left.
Record a voice memo
Access Custom Menu
Verify your phone number
right.
up.
Select Menu → Phone Info → Build Info
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Understanding screen icons
These icons may appear on your phone’s screen.
The phone is operating in IS2000 (1X)
digital mode.
The phone is operating in IS95
digital mode.
The phone is operating in Analog
(FM) mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
The alarm clock is set.
The phone is in privacy mode or is
accessing a secure Web site.
High-speed (3G) data service is available
and active on your phone. Check with your
service provider for availability.
(blinking) The phone is sending
high-speed data.
(blinking) The phone is receiving
high-speed data.
A call is in progress.
High-speed data service is available, but
the phone is dormant.
The phone is at the home screen. To
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its home
service area.
access Menu, press
The phone is at the home screen. To
access Contacts, press
.
You have a text message.
.
(
indicates the message is urgent.)
The phone is set to light up instead
of ring.
You have a voice message.
You have a voice/text message.
The phone is in camera mode.
Camera flash mode is ready.
Camera timer mode is ready.
Camera zoom mode is ready.
The phone is set to vibrate or to vibrate and
then ring.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
Speakerphone is on.
The battery is fully charged. The more
black bars, the greater the charge.
8
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2
MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller
appears on the screen if it is not restricted. If the
number is stored in your Contacts directory, the
contact name appears.
be received. Look for the
symbol on the home
screen. The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
1. Open the flip.
When the phone has been idle for a time, it
changes to power save mode. Press any key to
return to normal operating mode.
2. Press
- or -
to answer the incoming call.
1. Open the flip.
Press
to answer the incoming call and
2. Enter the phone number and press
.
turn on the speakerphone.
3. Press or close the flip to end the call.
Answering calls using the flip
Voice or Digit dialing
You can make a voice call by speaking the name
of the person/place you want to call
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data or fax calls.
•
Select Menu → Settings → Convenience →
Open to Answer → Enabled.
- or -
you can speak the digits of a phone number.
–
Select Disabled to have the phone
continue ringing when you open the flip.
Note: Voice call requires that a contact be saved
with a voice tag. See “Creating a voice tag for a
contact” on page 44.
Adjusting the volume during a call
•
1. Press
.
To adjust the earpiece or speakerphone
2. Follow the voice prompts to initiate voice or
volume during a call, press
or down.
up
digit dialing. The phone places the call.
3. Press
to end the call.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Silencing an incoming call
Using the speakerphone
Your Kyocera K322 phone has a built-in
speakerphone.
•
Press
Press
,
, or
to silence a call.
if you choose to answer the call.
- or -
•
To turn on the speaker, open the flip and press
. If you press during an incoming
call alert, you answer the call.
•
Press
voicemail.
to select Ignore. The call goes to
The icon at the top of the phone screen
indicates that the speakerphone is on.
Note: Press
Ignore if Hold Call is enabled. See “Setting the
to select Options then select
phone to hold calls”.
•
To turn off the speakerphone, press
.
Note: This action silences the current call only.
The next call will ring as normal. In the absence
of voicemail, this feature drops the call.
Dialing a three-way
conference call*
To dial a three-way conference call, dial the first
Redialing a number
number and press
press again.
, dial the second number,
•
To redial a recent call, from the home screen
press twice to open your Recent Calls list.
Highlight a phone number or name and
press
Tip: To redial the last number called,
received, or missed, press three times.
*May not be available on your phone, check with
your service provider
.
Setting the phone to hold calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
Note: This feature will not work if “Open to
Answer” is enabled. See “Answering calls using
the flip” on page 9.
1. From the home screen, press
to
select Contacts.
1. Select Menu → Settings → Convenience →
2. Scroll down the list to find the contact you
Hold Call → Enabled.
want to call.
3. Highlight the name and press
to dial
the number.
10
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you have not recorded a hold
Changing the hold message
message, you will be prompted to record one,
such as “Please hold. I’ll answer in a minute.”
1. Select Menu → Settings → Convenience →
Hold Call → Re-Record Msg and follow the
prompts.
2. Press
to select Record.
3. Record the message twice, as prompted.
2. Record the message twice.
4. Select Save or Options (Play, Re-Record,
3. Select Save or Options (Play, Re-Record,
or Exit).
or Exit).
The next time a call comes in, you will have the
option of placing it on hold.
Dealing with missed calls
When you have missed a call, “Missed Call”
appears on your screen unless the caller
leaves a voicemail.
Note: To ignore the call and send it to voicemail,
press
to select Options and then select
Ignore. In the absence of voicemail, this feature
drops the call.
•
•
To clear the screen, press
to select OK.
To view details of the call, press
to select
Placing a call on hold
You can place a call on hold once you have
enabled this feature.
Calls then press
To return the call, press
then press
.
•
to select Calls
.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. It will go to voicemail.
Setting missed call alerts
You can set an alert to beep every five minutes
after you have missed a call.
1. When a call comes in, press
to select
1. Select Menu → Settings → Sounds →
Options, press
and then press
down to select Hold Call
. The caller will be placed
Alerts → Missed Call Alert.
on hold and will hear your recorded
hold message.
2. Select an option and press
.
2. To speak to the caller, select Answer.
- or -
To hang up without speaking to the caller,
select End Call.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Calling recent calls
1. Press and hold
Viewing recent call details
Details on the last 60 calls you made, received, or
missed are stored in the Recent Calls list and are
identified by the following icons:
down.
2. Highlight the number you want to call and
press
.
- or -
Outgoing call
Incoming call
Select Menu → Recent Calls.
Select an option: All Calls, Incoming Calls,
Missed call (flashing)
Outgoing Calls, or Missed Calls.
Viewing recent calls
1. Select Menu → Recent Calls.
2. Select a list: All Calls, Incoming Calls,
Highlight the number you want to call and
press
.
Outgoing Calls, or Missed Calls.
Erasing recent calls
1. Select Menu → Recent Calls →
3. Select a recent call item and press
to
select Options:
Erase Call Lists.
–
–
–
–
Save adds the phone number to the
Contacts list.
2. Select an option: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
Send Text Msg sends a text message to
the contact.
3. Press
to select Yes.
Send Picture Msg sends a picture message
to the contact.
Speed dialing
Before you can use speed dialing, you must save a
phone number as a contact and assign a speed
dial location to it.
Erase Record erases the selected call
record.
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock
code, see “Changing your lock code” on page 41.
To classify a phone number as secret, see
“Creating a new contact” on page 20.
•
To add a speed dial location to a saved or new
contact, see “Customizing a phone number”
on page 22.
Using speed dialing
To call a contact that has a speed dial location:
•
From the home screen, enter the one- or two-
digit speed dialing location and press
.
12
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Follow the system prompts to create a
1-Touch dialing
1-Touch dialing is the fastest way to speed dial a
contact that has a speed dial location.
password and record a greeting.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial location
assigned to a contact.
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
Enabling 1-Touch dialing
Select Menu → Settings → Convenience →
•
1-Touch Dialing → Enabled.
If you see “New Messages”
Using 1-Touch dialing
To call a contact that has a speed dial location:
1. Press
to select Call, which initiates a call
to your voicemail number.
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
•
Press
to select Ignore.
If you see only the
symbol
speed dialing location is 15, press
then press and hold
briefly,
.
1. Press and hold
to initiate a call to your
voicemail number.
Setting up voicemail
Before your phone can receive voicemail
2. Follow the prompts to retrieve the message.
Note: You can set the phone to beep or
vibrate every five minutes to remind you that
you have voicemail.
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
See “Setting message alerts” on page 38.
Calling emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
1. From the home screen, press and hold
2. Press at the message.
.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
13
•
Dial your 3-digit emergency code and
press
Timing your calls
You can set your phone to beep 10 seconds
.
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters Emergency mode. This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
before each minute passes when you are on a call.
•
Select Menu → Settings → Sounds →
Minute Alert → Enabled.
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 42.
To exit Emergency mode
When you have completed the emergency call:
Understanding roaming
1. Press
to select Exit.
2. Press
again to confirm your choice.
Controlling network roaming
Note: To determine who has access to your
location, see “Setting position location” on
page 43.
Depending on services available from your
service provider, you may set the phone to either
digital or analog mode. This is useful if you are in
an area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu → Settings → Network →
1. Select Menu → Recent Calls.
Digital/Analog.
2. Select a timer:
2. Select an option and press
.
–
Recent Calls Timer tracks all calls you
have made and received since you last
reset this timer. To reset this timer to zero,
–
–
–
Automatic automatically switches the
phone between digital and analog.
Analog only sets the phone to work in
analog mode only.
press
to select Reset.
–
All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.
Analog call forces a call into analog mode
for the duration of the next call.
14
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Digital only sets the phone to work in
digital mode only.
Setting Call Guard
You can set the phone to warn you before you
answer or place a call while roaming.
Setting an alert for roaming
•
Select Menu → Settings → Convenience →
Call Guard → Call prompt.
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
–
The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
1. Select Menu → Settings → Network →
Roam/Svc Alert.
–
To accept or place a call while roaming,
2. Select an option and press
.
you must press
.
–
–
–
When no svc alerts you with three tones
Note: Call Prompt is disabled when the phone is
in Emergency Mode.
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
Using your phone in an airplane
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control.
In Airplane mode, however, your phone will not
emit RF signals. You cannot make or receive calls,
send text messages, or use the Web, but you can
play games, use the Scheduler, set the clock, and
make emergency calls to designated
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
emergency numbers.
Please check with uniformed personnel before
operating your phone in Airplane mode.
•
Select Menu → Settings → Sounds →
Roam Ringer → Enabled.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Setting Airplane mode
1. Select Menu → Settings →
Convenience → Airplane Mode.
2. Select OK after reading the message.
3. Select Disabled or Enabled.
16
Making and Answering Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ENTERING LETTERS, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Entering numbers
To enter a number while in
a number key once.
•
•
mode, press
or
Understanding text entry
screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
To enter a number while in
mode, press and hold a number key until the
number appears on the screen.
Entering words letter by letter
characters
remaining
capitalization setting
text entry mode
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, accented letters are available.
text entry
fields
2. Wait for the cursor to move right and enter the
next letter.
Note: To enter a space, press
.
Entering words quickly
When you press a series of keys using
checks its dictionary of common words and
guesses at the word you are trying to spell.
Text entry modes
There are six text entry modes:
mode,
Case change
Numbers only
Rapid Entry
Add Smiley
Normal alpha
1. For each letter of the word you want, press the
Add Symbol
key once. For example, to enter the word
“any” press
2. If the word doesn’t match what you want,
press to look at other word matches.
3. When you see the word you want, press
→
→
.
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in number mode. When
entering a name for a contact, you’re in normal
text mode. See “Changing modes” on page 18.
.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Entering symbols
While entering text, you can enter symbols by
Changing modes
Sometimes you need to change modes. For
pressing
until you see the symbol you want.
example, to enter numbers in an email address
Using this method, you have access to the
following symbols:
while in
mode, enter the numbers, and then change
back to mode to complete the address.
To change text entry modes:
mode, you must change to
.
@ ?
To access the full set of symbols:
1. From the text entry screen, select Options.
!
-
,
& :
‘
1
•
Press and hold
until the icon for the
mode you want appears at the top of
the screen.
2. Select
Add Symbol.
3. Press
down to view the list of symbols.
- or -
4. Press the number key corresponding to the
•
Select Options then select a different mode.
symbol you want.
Capitalization settings
You can change capitalization at any time while
Entering smileys
1. From the text entry screen, select Options.
entering text. Simply press
or lower case while in
to choose upper
Normal Alpha mode.
2. Select
Add Smiley.
3. Press
down to view the list of smileys.
4. Press the number key corresponding to the
smiley you want.
Switching default text entry modes
You can change the default text entry mode when
creating a text message. This setting applies only
to the message body screen, not the “To” screen.
1. Select Menu → Messages →
Msg Settings → Default Text.
2. Select Normal Alpha or Rapid Mode.
18
Entering Letters, Numbers, and Symbols
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 17.
Use mode and press a key once to enter its number.
For more options, see page 17.
Enter a number
Enter a symbol
Enter a smiley
Press
until you find the symbol you want. See page 18.
Use
mode and press a key once to enter its number.
For more options, see page 18.
Enter a space
Press
Press
.
Erase a character
.
Erase all characters
Press and hold
.
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Press
Press
right or left.
up or down.
Press and hold
.
In
In
In
mode, press
mode, press
mode, press
. Choose
. Choose
. Choose
or
.
Lowercase any letter
Change to Initial Caps
Select soft options on the screen
.
.
Press the appropriate key,
Press right or left.
.
Highlight an option at the bottom
of the screen
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
19
4
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Each
contact entry can have up to six phone numbers,
two email addresses, two Web addresses, two
street addresses, and a space for notes.
Note: From the home screen, you can also press
to select Contacts and then press to
select New.
Adding a code or extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing, for example, where you would wait
to dial an extension.
Creating a new contact
1. From the home screen, enter the phone
number you want to save, including the
area code.
1. From the home screen, enter the phone
2. Press
to select Save.
number.
3. Press
to select Save New Contact.
2. Press
to select Options.
4. Enter a name for the contact.
3. Select a type of pause:
–
If you need to learn how to enter letters,
see “Understanding text entry screens” on
page 17.
–
–
Time Pause causes the phone to
stop dialing for two seconds.
Hard Pause causes the phone to
stop dialing until you select
Options → Release.
–
To add a symbol or smiley to the contact
name, or to change the text entry mode,
press
to select Options.
4. Enter the remaining numbers.
5. Either save now or add more contact
5. Press to select Save.
information.
–
–
To save now, press
to select Save.
Customizing your contacts
To enter additional phone numbers, email
and Web addresses, or notes, press
down repeatedly. For help switching
between numbers and letters for email or
Web addresses, see “Changing modes” on
page 18.
You can customize each contact in your Contacts
directory by assigning ringers, pictures, and
number types, or by classifying your contacts as
Personal or Business.
20
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning ringers
1. Press
Classifying contacts as Personal
or Business
to select Contacts.
1. Press
2. Highlight a contact and press
3. Highlight the contact’s phone number and
press to select Options.
to select Contacts.
2. Highlight a contact and press
.
.
3. Highlight the contact name and press
to
select Options.
4. Select Ringer → Assign Ringer.
4. Highlight Add to Group and press
5. Scroll down the list to hear the different
ringers and press
to select one.
5. Select Business or Personal and press
.
Note: To assign Personal or Business ringers, see
“Assigning business and personal ringers” on
page 36.
Assigning pictures
1. Press
to select Contacts.
2. Highlight a contact and press
.
Assigning number types
3. Highlight the contact name and press
to
select Options.
When you assign a number type, an icon is placed
in front of a contact number to specify the type of
number, such as work, home, or mobile.
4. Select Picture → Assign Picture →
Camera Pictures and continue at step 5
1. Press
to select Contacts.
- or -
2. Highlight a contact and press
.
Select Picture → Assign Picture → Images.
Select an option, Saved Images, Wallpapers,
3. Highlight the contact number and press
to select Edit.
or Caller IDs and then press
5. Scroll through the list to view your options
and press to assign it to your contact.
.
4. Press
down once and press
.
5. Highlight an option to designate the number
as General, Work, Home, Mobile, Pager, or
Note: With mobile PhoneTools for Kyocera, you
can transfer digital pictures to your phone. To
purchase MPT or other accessories, visit
Fax and press
. You can also add email
addresses, street addresses, Web page URLs,
and a note.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
21
The associated icon will appear next to the
entry in your Contacts directory and
Recent Calls list.
Customizing a phone number
1. Press
to select Contacts.
2. Highlight the contact to edit and press
.
3. Press
down to highlight the
general
fax
contact number.
work
home
email address
street address
4. Press
to select Options.
5. Highlight an option and press
:
–
Add Speed Dial assigns or removes the
speed dial location.
mobile
pager
Web page URL
note
–
Secret makes the number secret so that it
will not appear on the screen until the
lock code is entered. Secret numbers can
be called without a lock code. (For more
information, see “Limiting calls” on
page 41.)
6. Press
to select Save.
Editing a contact
1. Press
–
Primary Number makes this number the
first one that shows up when you open the
contact.
to select Contacts.
2. Highlight a contact and press
.
3. Highlight the contact name or number and
press to select Edit.
–
–
Add to Group adds a contact to a Business
or Personal group.
4. Enter your changes and press
to select
Add Voice Dial to record a voice tag so you
can call a contact using voice recognition
(VR). For more information, see page 44.
Save.
Erasing a contact
1. Press
–
–
Erase Voice Dial erases the voice tag
associated with the number.
to select Contacts.
2. Highlight the contact to erase and press
3. Select Options.
.
Edit Voice Dial records a new voice tag.
6. Enter the new information and follow
4. Highlight Erase Contact and press
.
the prompts.
5. Press
to confirm.
7. Select Save, if necessary.
22
Storing Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: To call the contact, highlight the
Finding contact information
number and press
.
To find a phone number or contact, you can (1)
check the Frequent list, (2) search the Contacts
directory, or (3) use Fast Find.
Setting Fast Find
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
Checking the Frequent List
•
Select Menu → Settings → Convenience →
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
when the Frequent List is enabled. Scroll past the
double line to view the All Contacts list.
Fast Find → Enabled.
Using Fast Find
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed dial
entry appears.
To enable the Frequent List setting
•
Select Menu → Settings → Convenience →
Frequent List → Enabled.
2. Press
down to scroll through
Searching the Contacts directory
matching entries.
1. Select Contacts for a list of all contacts.
To quickly get down the list, enter the first
letter of the contact. The menu skips to that
letter of the alphabet.
3. Highlight the name you want then press
to call the number.
- or -
Select Menu → Contacts.
2. Select a search method:
–
–
View All lists all saved contacts.
View Groups select a contact from
the specified list, Business List or
Personal List.
–
Speed Dial List or Voice Dial List selects a
contact from the specified list.
3. Highlight a contact and press
.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
23
5
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive, and
erase text messages from your phone. For
information on voicemail messages, see “Setting
up voicemail” on page 13.
3. Add another recipient if desired:
–
Press
to select Options then select
Recent List, Contacts, or Group Lists.
- or -
Important: The features and menus described in
this chapter may vary depending on services
available in your area. Check with your service
provider for details and possible usage charges.
–
Enter a space or comma after the
first number then enter another
recipient manually.
Note: You can send a message to up to 10
recipients at once. The messages will be sent
one at a time, once to each addressee.
Sending text messages
You can only send text messages to phones
that are capable of receiving them or to
email addresses.
4. When you are done entering addresses,
press
twice.
5. Enter the message. To learn how to enter text,
see “Understanding text entry screens” on
page 17.
Creating a text message
1. Select Menu → Messages → New Text Msg.
2. Enter a recipient’s phone number or
- or -
Add QuickText, symbols, or smileys to your
message. See “Including prewritten text and
symbols” on page 25 for information.
email address:
–
Select Options to access your Recent List,
Contacts, or Group Lists and press
Select a contact and press
Highlight the number field and press
.
6. Press
to select Send. See “Setting sending
.
options” on page 25 for information about
how and when you want the message to
be received.
.
For more about group lists, see “Creating
group lists” on page 29.
- or -
–
Enter a New Address manually. (To learn
how to enter text, see “Understanding text
entry screens” on page 17.)
24
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a contact and press
Highlight the number field and press
.
Including prewritten text and
symbols
.
–
Save Message saves the message in
your Drafts folder. This prevents the
message from being deleted if you have
activated AutoErase and enables you to
send the message to others.
During text entry, you can insert QuickText,
symbols, or smileys into your message.
1. From the text entry screen, select Options.
2. Select an option and press
:
–
Insert QuickText scroll through the list of
options and press to select one.
–
–
Save QuickText saves the message you
have just entered as a prewritten message
then returns to the message entry screen
so you can send the message.
–
Add Symbol scroll through the list and
press the corresponding number key
to select it.
Settings allows you to choose from the
–
Add Smiley scroll through the list and
press the corresponding number key to
select it.
following after pressing
:
•Request Receipt to request notification
when the message has been received.
3. When you have finished your message, select
Send. See “Setting sending options” for
information about how and when you want the
message to be received.
•Set Priority labels the message as
“Urgent.”
•Callback Number includes a callback
number with the message to let recipients
know at what number they can call you
back. Select OK to include your own
number or Edit to enter a different
callback number.
Setting sending options
When you are ready to send a message, you have
several options for how and when you want the
message to be received.
•Send Later schedules a time to send
the message.
1. Once you have completed the message,
select Options:
•Validity Period defines expiration period
limit for a message.
–
Add Address returns to the “Send To”
screen to add another recipient without
losing the message. Select Options to
access your Recent List, Contacts, or
2. When you have finished setting options, press
to return to the message window.
3. Press
to select Send.
Group Lists and press
.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Adding a signature
The signature you create is included at the end of
all outgoing messages and is counted as
Understanding appended messages
capitalization setting
characters
remaining
text entry mode
characters in your messages; however, it does not
appear in the message creation screen.
text entry
fields
To create a signature:
1. Select Menu → Settings → Messaging →
Signature.
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
2. Enter your signature in the text field.
3. Select OK to save the setting.
Note: The characters in the signature are
included in the total character count of the
message. See the note under step 5 in “Creating a
text message” on page 24.
Important: Your service provider will charge you
for each message segment.
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0.
If you cannot send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 29.
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit, you are
prompted to edit the message or alerted that the
message is being appended.
Receiving incoming calls while
creating messages
•
If you don’t wish to answer the call, press
to select Ignore. The phone returns to the
message screen.
26
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
•
To answer the call, press
. Your message
The message has been received and
opened. (This symbol may not be
available. Check with your service
provider.)
is saved to the Drafts folder. To return to the
message, select Menu → Messages →
Drafts → Resume.
Viewing your sent messages
To save your outgoing messages, you must first
The message has been sent to more than
one recipient.
enable Save to Sent.
The message has never been sent or has
not been sent since it was last modified.
You can cancel delivery of the message.
1. Select Menu → Messages →
Msg Settings → Save to Sent.
2. Select an option and press
.
–
Enabled automatically saves all
successfully sent messages in the
Sent folder.
Viewing failed or pending messages
Failed or pending messages are stored in
your OutBox. To view your OutBox:
–
Prompt allows you to choose whether or
not to save your message when you send it.
1. Select Menu → Messages → OutBox. A list of
all failed or pending messages appears.
To view successfully sent messages:
2. Scroll through the list of messages and press
to read one. One of the following
1. Select Menu → Messages → Sent.
2. Press
up or down to scroll through the
symbols appears next to each message:
list of messages. One of the following symbols
appears next to each message:
The message is pending and will be sent
when possible. You can cancel delivery of
the message.
The scheduled message will be sent at the
scheduled time. You cannot cancel
delivery of the message.
The message cannot be sent
because service is not available. An alert
appears on your phone if the message
cannot be sent.
The scheduled message has been sent and
will be delivered as scheduled. You
cannot cancel delivery of the message.
The message has been received.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Reading the message
The options available to you may vary. Check with
your service provider.
Retrieving text messages
When a text message is received, the outer screen
displays “New Text”, the inner screen displays
“New Messages” with the
of your screen. The symbol flashes if the message
is urgent.
symbol at the top
1. If the text message is long, press
down
to view the entire message.
2. When you are finished, you can press
to
Reply to the sender or press
to select
If you see the “New Messages” note
additional Options:
•
To view the message, press
to select
InBox, highlight the message, and press
to select View.
–
–
Erase the message.
Lock Msg to protect the message from
•
To Ignore the message, press
.
being accidentally deleted.
–
–
Forward the message.
Note: If you receive a new message while you are
reading a message, the one you are reading will
be replaced by the new one. You can find the
older message in the InBox:
Reply with Copy to reply to the message
with a copy of the original attached.
–
–
Save Message to save the message.
•
Select Menu → Messages → InBox.
Save as QuickText to save the text from the
message as QuickText, which you can
insert into other messages. Graphics and
sound are not saved as part of
QuickText.(For more about QuickText, see
page 30.)
If you see the
symbol
1. Select Menu → Messages → InBox. A list of
all your received messages appears.
–
indicates an “Urgent” message.
2. Scroll through the list of messages and press
–
View Sender information.
to read one.
Note: The
symbol indicates that a graphic did
not come through. It may be too large or
incorrectly formatted.
Setting message alerts
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 38.
28
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select a folder from which to erase all
messages: InBox, OutBox, Sent, Saved Folder,
Drafts Folder, or All Messages. To erase
messages from all folders, select
All Messages.
Erasing messages
It is a good idea to erase old messages to free up
memory in your phone.
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox, or
erasing them all at once.
3. A message appears: “Erase all messages?”
Select Yes to erase messages or No to cancel.
Erasing messages automatically
Erasing single messages
1. Select Menu → Messages.
2. Select the type of text message you want to
Use this setting to have old messages
automatically erased from the InBox when
memory is low.
erase and press
: InBox, OutBox, Sent,
•
Select Menu → Messages →
Msg Settings → Auto-Erase →
Old InBox Msgs.
or Saved.
3. Highlight the message to erase and
press
.
Older messages will be erased as new
messages are received.
4. Select Options.
5. Select Erase to erase the message. A message
appears: “Erase this message?”
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
6. Select Yes to erase the message.
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of
the message.
Creating group lists
You can create and save a list of multiple
recipients. Your Kyocera K322 phone stores five
group lists with up to 10 recipients per list.
Erasing all messages
1. Select Menu → Messages →
Erase Messages.
1. Select Menu → Messages → Group Lists →
Create New.
2. Enter a name for the list. For help entering
text, see “Understanding text entry screens”
on page 17.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
29
3. Select Next.
2. To create a new pre-written message,
select New Msg.
4. To enter the first phone number or email
address, select an option:
- or -
–
–
–
Recent List to select numbers from your
Recent List.
To edit an existing pre-written message,
highlight the message and select Edit.
Enter from Scratch to enter the phone
number or email address manually.
3. Enter or edit the text.
Note: To change text mode press
to select
Contacts List to select numbers from your
phone book.
Options. Press
to select Text Mode or you
can choose Information for text mode help. For
additional help entering text, see “Understanding
text entry screens” on page 17.
5. Locate the contact number and press
.
6. Select Options → Recent List or Contacts.
7. Locate the contact number and press
4. Press
to select Save.
.
Note: You can also save a message you have
written or received as QuickText. See “Setting
sending options” on page 25 or “Reading the
message” on page 28.
8. When finished, select Done.
To send a message to your new group, see
“Sending text messages” on page 24.
Creating and editing prewritten
messages (QuickText)
Your phone comes with prewritten (QuickText)
messages, such as “Please call me,” which you
can insert into the body of a text message. You can
edit these messages and create new ones. Your
phone will store up to 40 QuickText messages,
with up to 100 characters per message.
1. Select Menu → Messages →
Msg Settings → Edit QuickText.
30
Sending and Receiving Text Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
6
SENDING AND RECEIVING MULTIMEDIA MESSAGES
Note: You can send one multimedia message
to a maximum of 10 recipients.
Sending multimedia messages
You can only send multimedia messages to
phones that are capable of receiving them or to
email addresses.
You can choose to send a copy or blind copy.
4. Press
down to enter a recipient in the
CC or BCC fields.
Note: The multimedia messages feature is not
available on all phones. Check with your
service provider.
5. Press
down to enter a message in the
Subject field. Choose a method:
–
–
Enter the subject text manually, or
Multimedia messages have a predetermined
character and file size limit. When you reach the
character and file size limit for a single
multimedia message, you must edit the message
to meet the size limitation.
Press
to select Options.
6. Press
down to enter a brief text
message in the Text field.
–
–
Enter the text manually, or
Note: For details, check with your
service provider.
Press
to select Options.
7. Press
down once to enter an image in
the Image field.
Creating a multimedia message
1. Select Menu → Messages →
Note: You may add only one picture per
multimedia message.
New Picture Msg.
8. Press
to select Options. Select an option:
2. Enter the recipient’s phone number or email
address in the To field.
•
Take Picture to instantly take a new photo
and attach it to your message.
3. To add additional recipients:
•
Media Gallery to access all picture files in
the phone:
Enter a space or comma after the first phone
number or email address, then enter another
recipient manually
–
Camera Pictures displays your photos
- or -
taken in a table/thumbnail view.
Press
to select Options. Then select
Contacts or Group Lists.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
31
• Highlight a photo to add to the
multimedia message. Press
to choose Select.
–
Message Priority allows you to send
your multimedia message with Normal or
Urgent priority.
–
Images displays stored images on
11. Press
to select Send. This will send your
the phone.
multimedia message.
9. Press
down once to enter the Sound
Receiving multimedia messages
field and press
to select Options. Choose:
There are two settings for receiving a multimedia
message on your K322 phone: Auto receive
(default) and Prompt.
•
Record Sound to instantly record a new
sound and attach it to your message.
•
Media Gallery to display a list of
categories that contain saved or
downloaded sounds and voice memos.
Auto retrieve mode
When a multimedia message is received, it is
automatically downloaded onto your phone.
– Highlight Saved Sounds.
Press
to select OK.
The alert “New Message(s)” appears along with
the text “Message Received. View now?”
– Highlight a sound to add to the
multimedia message. Press
choose Select.
to
•
•
To View the multimedia message, press
To view Later, press
.
.
Note: You may add only one new or stored
Note: If a multimedia message is received
during a call, then the phone downloads the
message approximately one minute after the last
key is pressed.
sound per multimedia message sent.
10. Before sending your message, press
to
select additional Options. Choose:
–
Preview Message plays your multimedia
message prior to sending.
Note: To activate Auto Retrieve mode:
1. Select Menu → Messages → Msg Settings.
–
Save Message allows you to save your
multimedia message to the Drafts Folder
and send it later.
2. Press
up or down to scroll through the
list.
–
Add Address allows you to add additional
addresses to your multimedia message
prior to sending it.
3. Highlight Auto Retrieve.
32
Sending and Receiving Multimedia Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press
to select Auto Retrieve.
Viewing multimedia messages
–
Enabled downloads messages
When you receive a multimedia message, a
automatically from the server.
appears on your phone’s screen and remains until
all messages are viewed. The message is stored in
the InBox until the full message has been received,
regardless of the auto receive or prompt setting.
–
Disabled will prompt you for download,
when a Pix Alert is received.
Prompt mode
1. Press
the message is long, press
the entire multimedia message.
2. Press to select Options. Press
to View the multimedia message. If
When a multimedia message is received, your
screen displays the alert “New Message(s)” along
with the question “Retrieve Now?”
down to view
down
•
•
To View the multimedia message, press
.
to highlight additional options for the multimedia
message (options vary according to selection):
Select Erase to never download the
multimedia message.
Note: The options available to you may vary.
•
To view Later, press
.
Check with your service provider.
–
–
Mute to silence the message.
Note: If a multimedia message is received during
a call, then the phone screen displays the alert
“New Message(s)” after the call ends.
Erase Msg allows you to delete the
currently displayed multimedia message.
To activate Prompt mode:
–
Forward launches the message creation
screen, allowing you to forward the
multimedia message. The original address
will not be shown, nor will the graphic,
sound, and text fields.
1. Select Menu → Messages → Msg Settings.
2. Press
up or down to scroll through the
list.
3. Highlight Auto Retrieve and press
4. Press up or down through the list and
highlight Disabled. Press
.
–
–
Lock Msg to avoid accidentally erasing it.
Message Info displays multimedia
message information (priority, sender,
subject, time sent and received, and
message size).
.
–
–
Replay plays the multimedia message
again from the beginning.
Done exits the multimedia message.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
33
–
–
Call initiates call to sender of
multimedia message.
Save Picture saves the currently
viewed picture embedded in the
multimedia message.
–
–
Save Sound saves the current sound
embedded in the multimedia message.
Save Address extracts email addresses,
phone numbers, and/or URLs from the
sender information and multimedia
message body.
–
–
Save as QuickText saves the text in the
multimedia message to the QuickText list.
Save Message saves the multimedia
message to the Saved Folder on the phone.
3. When you are finished viewing the multimedia
message, select Reply or press
.
34
Sending and Receiving Multimedia Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
7
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
My Banner
Voice Features
Add Voice Dial
Network
Data/Fax Calls
Vibe then Ring
Lights Only
Normal Sounds
Main Menu View
Color Themes
Wallpaper
Screen Saver
Backlighting
Auto-Hyphen
Language
Time/Date Format
Contrast
Brightness
Erase Voice Dial
Voice Training
Voice Wake-Up
Voice Answer
Expert Mode
Privacy Alert*
Set Phone Line*
Roam/Svc Alert
Roam Option
Digital/Analog
Location
Sounds
Ringer Volume
Ringer Type
Business Ringer
Personal Ringer
Roam Ringer
Flip Open
Flip Closed
Pwr On/Off Sound
Key Volume
Messaging
Alerts
Signature
Edit QuickText
Callback Number
Text Msg Receipt
Save to Sent
Accessories
Pwr Backlighting
Headset Ringing
Auto-Answer
Com Port Speed
TTY Device
Convenience
Airplane Mode
Open to Answer
Fast Find
Auto-Erase
Default Text
Gamepad Keymap*
Edit
Key Length
Key Sound
Alerts
Smart Sound
Minute Alert
Earpiece Volume
Spkrphone Volume
Frequent List
Hold Call
1-Touch Dialing
Web Prompt
Call Guard
Voicemail Num.
Reset
Security
Lock Phone
Limit Calls
New Lock Code
Erase Contacts
Emergency Numbers
*Not available on all phones. Check with your service provider.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Turning sounds back on
Press and hold
Silencing all sounds
•
.
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages).
You can silence all sounds and set the phone to
vibrate or light up when you receive calls
and alerts.
Choosing ringers
Your Kyocera K322 phone has multiple ringers
you can choose to use for incoming calls.
1. Select Menu → Settings → Sounds →
Ringer Type.
Setting the phone to vibrate or
light up
2. Scroll down the list to hear the different rings
and press
to select one.
1. Select Menu → Settings → Silent Mode.
2. Choose an option and press
Note: Downloaded ringers are added to the end
of the standard list of ringers.
:
–
Vibrate Only the phone vibrates for the
duration of the incoming call or other
alerts. appears.
Assigning business and
personal ringers
–
Vibe then Ring the phone vibrates for the
first 10 seconds and then rings for the
remainder of the incoming call alert.
appears.
Lights Only the phone lights up for the
duration of the incoming call or other
alerts. appears.
Normal Sounds the phone rings for the
incoming call or alert (in effect, returns
phone to a non-silent mode).
You can assign ringers to contacts classified as
Business or Personal in your Contacts directory.
Note: To classify a contact as Business or
Personal, see page 20.
–
–
1. Select Menu → Settings → Sounds.
2. Highlight Business Ringer or Personal Ringer
and press
.
3. Select a ringer and press
.
Setting sounds for your phone
Note: The phone will ring when it is attached to
an external power source (such as a charger),
even if all sounds have been silenced.
You can set your phone to sound tones when you
open and close the flip and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are in a call, or if a
headset or hands-free car kit is attached to
your phone.
Shortcut to Vibrate Only mode
•
Press and hold
.
36
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Using smart sound
Set sound when flip opens
1. Select Menu → Settings → Sounds →
Flip Open.
You can set a baseline volume that the phone uses
to automatically adjust the earpiece volume when
there is a change in the amount of noise around
you or the caller’s voice.
2. Scroll through the list to hear the sounds and
press
to select one.
•
Select Menu → Settings → Sounds →
Smart Sound→ Enabled.
Set sound when flip closes
1. Select Menu → Settings → Sounds →
Flip Closed.
Adjusting the ringer volume
1. Select Menu → Settings → Sounds →
2. Scroll through the list to hear the sounds and
Ringer Volume.
press
to select one.
2. Press
right to increase the volume, or
Set sound when phone powers on
or off
left to decrease the volume.
3. Press
to select Save.
•
Select Menu → Settings → Sounds →
Adjusting speakerphone volume
1. Select Menu → Settings → Sounds →
Pwr On/Off Sound → Enabled.
–
Select Disabled to deselect this sound.
Spkrphone Volume.
2. Press
left to decrease the volume.
3. Press
right to increase the volume, or
Adjusting volume
You can adjust the earpiece, speakerphone, and
ringer volume as well as key tones.
to select Save.
Adjusting key tone volume
You can change the volume of the tones the phone
makes when you press the keys.
Adjusting the earpiece volume
To adjust the earpiece volume manually during a
call, press
or
up or down.
1. Select Menu → Settings → Sounds →
To set the earpiece volume:
Key Volume.
1. Select Menu → Settings → Sounds →
2. Press
right to increase the volume, or
Earpiece Volume.
left to decrease the volume.
2. Press
right to increase the volume, or
3. Press
to select Save.
left to decrease the volume.
3. Press
to select Save.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Setting key length
You can change the duration of the tones the
phone makes when you press the keys.
Setting alerts for your headset
When a headset (sold separately) is attached to
the phone, you can set alert sounds to originate
from the headset.
1. Select Menu → Settings → Sounds →
Key Length.
1. Select Menu → Settings → Accessories →
Headset Ringing.
2. Choose Normal or Long and press
.
Select Out of headset to have alerts originate from
the headset.
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
Using shortcuts
From the home screen, press
directions to access three shortcuts and one
in one of four
1. Select Menu → Settings → Sounds →
Alerts.
custom menu.
2. Select the type of alert: Message Alert,
Page Alert, Voicemail Alert or
Missed Call Alert.
Up: Access your Custom Menu
Down: Access Recent Calls
Left: Launch Web Browser
Right: Record Voice Memo
3. Press
to select an option:
–
Vibrate, Beep, Freeway, Game, Bloop,
Winner, Zilofon sets the phone to alert you
once when a new message is received.
Creating and updating your
custom menu
–
Vibrate & Remind, Beep & Remind, FwY &
Remind, Game & Remind, Bloop &
You can create a custom menu that contains your
favorite features. After you set up your menu,
simply press and hold
1. Press and hold
Custom Menu.
2. Press
Remind, Winner & Remind, Zilofon &
Remind sets the phone to notify you once
when a new message is received and then
notify you again every five minutes. To stop
up to access it.
up to launch
to select Edit.
a reminder alert, press
to
select Ignore.
3. Scroll through the menu list and press
to
select or deselect your favorite features.
–
Disabled turns off message alerts.
38
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
–
You may select more than one menu item.
Items appear in alphabetical order in
the menu. A check mark appears in the
box when selected.
–
Graphic displays icons of each menu item,
with its name at the bottom of the screen.
List displays a list of each menu item.
Wheel displays a rotating graphic image of
–
–
4. Press
to select Save.
the menu items.
3. Press
to return to the home screen. The
Choosing a different language
Your phone may display alternative languages.
next time you select Menu, you will see the
menu view you selected.
1. Select Menu → Settings → Display →
Adjusting the backlighting
Language.
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the length of time that bright
backlighting remains on.
2. Select a language and press
.
Personalizing the screen
Changing your banner
1. Select Menu → Settings → Display →
Backlighting → Duration.
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
2. Select an option and press
:
–
7 seconds, 15 seconds, or 30 seconds—
1. Select Menu → Settings → Display →
(Default) Turn backlighting on for 7, 15,
or 30 seconds after your last keypress.
My Banner.
2. Press
3. Press
4. Enter your new text.
5. Press
to select Edit.
to clear the screen.
–
7 sec. & in call, 15 sec. & in call, or 30 sec.
& in call—Turn backlighting on for the
duration of a call, and for 7, 15, or 30
seconds after your last keypress.
to select Save.
Note: The “in call” settings drain the battery
more quickly.
Choosing a menu view
Three menu views are available: Wheel, Graphic,
and List.
Using Power Save Mode
You can conserve battery life by activating Power
Save mode to dim the backlight. The backlighting
appears for the selected duration but is less bright
than with Power Save off.
1. Select Menu → Settings → Display →
Main Menu View.
2. Select an option and press
.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
39
•
Select Menu → Settings → Display →
Selecting a screen saver
Backlighting → Pwr Save Mode → On.
Screen savers appear on the home screen when
the flip is open or closed and are activated 10
seconds after the last keypress. Incoming calls
and alerts override screen savers.
Setting power backlighting
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
1. Select Menu → Settings → Display →
Screen Saver.
Note: Power backlighting may not be available
with the optional desktop charger or
other accessories.
2. Highlight a screen saver and press
. The
image displays.
3. Press
to assign the screen saver.
Tip: Use the power backlighting as a night light
when traveling.
1. Select Menu → Settings → Accessories →
4. Press
to return to the home screen
and wait 10 seconds to view the screen saver
you chose.
Note: Downloaded screen savers are added to
Pwr Backlighting.
2. Select Always On to keep backlighting on.
the end of the list.
Note: The battery charges more slowly when
Selecting wallpaper
Wallpaper appears on the home screen.
power backlighting is on.
Changing the display contrast
1. Select Menu → Settings → Display →
1. Select Menu → Settings → Display →
Wallpaper.
Contrast.
2. Highlight a wallpaper design and press
3. Select Assign to save your selection.
.
2. Press
left or right to adjust the contrast
and select Save.
4. Press
to return to the home screen.
Setting numbers to auto-hyphenate
Selecting a color theme
You can select a color theme for the display
background of your phone.
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
For example, 1-222-333-4444.
1. Select Menu → Settings → Display →
Color Themes.
•
Select Menu → Settings → Display →
Auto-Hyphen → Enabled.
2. Scroll through the options to view the
color themes and press
to select one.
40
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
On power up locks the phone every time
you turn it on.
Now locks the phone immediately.
Choosing a different time/date format
1. Select Menu → Settings → Display →
Time/Date.
5. Press
.
2. Highlight an option and press
.
Unlocking the phone
Creating a secure environment
1. From the home screen, press
select Unlock.
2. Enter your four-digit lock code.
to
This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Emergency Numbers.
4. Select an Unassigned slot.
Changing your lock code
The lock code is typically 0000 or the last 4 digits
of your phone number.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select New Lock Code. A message appears:
“Change Code?”
5. Enter the phone number, including the area
4. Press
digit code.
to select Yes and enter a new four-
code. Do not enter 1 before the area code.
6. Press
to select Done.
5. Enter your new lock code again.
Note: To make a call to an emergency number
from a locked phone, you must dial the number
(including area code) exactly as it was stored in
Emergency Numbers.
Locking your phone
When your phone is locked, you can call only
emergency numbers or your service provider’s
number. You can still receive incoming calls.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
Limiting calls
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
your service provider’s numbers.
4. Highlight an option:
1. Select Menu → Settings → Security.
–
Never does not lock the phone.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
41
2. Enter your four-digit lock code.
3. Select Limit Calls.
4. Choose an option and press
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
:
–
–
No Limit limits no calls.
Limit Outgoing calls only. Incoming calls
1. Select Menu → Settings → Network →
Set Phone Line.
can still be received and answered.
2. Select one of the two lines and press
.
–
Limit All calls, both incoming
and outgoing.
Data Settings
Erasing all contacts
You can erase all entries from your
Contacts directory.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
1. Select Menu → Settings → Accessories →
Com Port Speed.
4. Select Yes to erase all contacts. A message
2. Select the speed. The options are: 19.2 kbps,
appears: “Erase ALL Contacts?”
115.2 kbps (default), 230.4 kbps, and Other.
5. Press
to select Yes to erase all contacts.
Note: There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Network settings
Switching between phone lines
Setting the phone to receive data
or faxes
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
42
Customizing Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: To purchase a cable, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (For example: 911, 111, 999,
and 000) in markets where service has
been implemented.
1. Connect the phone to the laptop or PC.
2. Set the Com speed.
3. Select Menu → Settings → Network →
Data/Fax Calls.
Note: This feature works only when your phone is
in digital mode. You do not have the option of
turning off the locator to emergency services.
4. Press
to select an option:
–
–
Voice only allows only voice calls.
1. Select Menu → Settings → Network →
Fax, next call or Data, next call sets the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
Location.
2. Select 911 Only or Location On.
–
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
–
Fax, until off or Data, until off forces the
phone into fax mode or data mode until
the phone is turned off.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
–
Location On shares your position
information with your service provider’s
network, in addition to
emergency services.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to the phone.
2. Enter
your keypad.
3. Press to select the TTY option.
from
4. Close the Information window by pressing
to select OK.
5. Highlight TTY On and press
.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
43
8
USING VOICE RECOGNITION
Voice recognition allows you to make and
answer calls by speaking commands into the
phone’s microphone.
Editing a voice tag
1. Select Menu → Contacts → Voice Dial List.
2. Highlight the contact to edit, and press
.
Note: You cannot use voice recognition to end a
3. Highlight the phone number and
call; you must press
when the flip is open.
select Options.
4. Select Add Voice Dial, Edit Voice Dial, or
Setting up voice dialing
To make or receive calls using voice dialing,
contacts must be saved with associated voice tags.
Erase Voice Dial.
5. Follow the prompts.
Making a call using voice tags
1. If you haven’t already done so, record a voice
Creating a voice tag for a contact
1. Press
to select Contacts.
tag for the person you wish to call.
2. Highlight the contact and press
.
2. With the flip open, from the home screen,
3. Press
down to highlight the number.
press
. The phone responds:
4. Press
to select Options.
“Say a name.”
5. Highlight Add Voice Dial and press
.
3. Say the name of the person you want to call.
6. Follow the voice prompts. You will need to say
4. If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call, or
say No to cancel.
the name twice.
Viewing entries with voice tags
•
Select Menu → Contacts → Voice Dial List.
Note: If the phone finds multiple voice tags
that sound like the name you said, you will be
asked to verify which name you want to call.
Say Yes when you hear the correct name. Say
No when you hear an incorrect name.
A list of all contacts with assigned voice
tags appears.
5. When you are finished with the call,
press
to end the call.
44
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Say “Call” to dial the number.
Erasing voice tags
To erase all voice dial recordings in your phone:
Say “Verify” to cause phone to repeat the
set of digits that you input.
1. Menu → Settings → Voice Features →
–
–
Say “Cancel” to exit voice recognizer and
return to the home screen.
Erase Voice Dial.
2. Select Yes.
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Making a call using digit dialing
When using digit dialing, you speak digits to dial a
phone number.
Using voice features with
hands-free car kits
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a professionally installed Kyocera
hands-free car kit (sold separately).
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1. From the home screen, press
. The phone
responds: “Say a name or say Dial.”
2. Say “Dial”. The phone responds:
Note: The following features apply only to
installed hands-free car kits unless noted.
“Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
To shop for hands-free car kits, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
If you pause, the phone will prompt you with
the following five options. After the prompt,
speak an option.
Waking up the phone
If your phone is connected to a Kyocera installed
hands-free car kit, you can use the voice
command to activate the phone to make a
phone call.
–
Say “Clear” to erase the last digit entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts
you with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
45
To activate the Voice Wake-up setting:
To activate the Voice Answer setting:
•
Select Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory.
Note: The accessory must be attached to use
this feature.
1. Select Menu → Settings →
To wake up the phone:
Voice Features → Voice Answer.
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
2. Highlight Enabled and press
.
3. Select Menu → Settings → Silent Mode →
If the phone does not recognize your
“Wake up” command, see “Training voice
recognition” on page 47.
Normal Sounds, then press
.
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as a
contact entry in your phone, then the phone will
say “Incoming call from (Name), answer?”
Answering the phone
You can set your hands-free car kit to
(1) answer automatically or (2) answer using
a voice command.
•
Say “Yes” or press any key except
.
Answering automatically
Ignoring an incoming call
You can set your phone to answer automatically.
To ignore an incoming call, do one of
the following:
Note: This setting also works with the portable
hands-free car kit.
•
•
Say “No” and press
to silence the alert.
•
Select Menu → Settings → Accessories →
Auto-Answer → After 5 secs.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free car kit.
•
Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
46
Using Voice Recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Expert Mode
Expert Mode allows you to use voice recognition
at a faster pace by reducing the number of voice
instructions and replacing them with tones.
Simply speak a command after the tone.
Select Menu → Settings → Voice Features→
Expert Mode → Expert.
Training voice recognition
If your phone is having trouble recognizing your
voice, you can train it with the commands Yes,
No, and Wake up.
1. Select Menu → Settings → Voice Features.
2. Select Voice Training.
3. Read the message and press
to select OK
and continue. Cancel returns you to the
previous screen.
4. Select Train All or the item you want to train.
5. Follow the prompts for each word until
training is complete.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
47
9
USING THE CAMERA
3. Press
to select Settings.
Tips before operating
your camera
4. Highlight an option and press
:
–
–
Flash options are On, Off, or Automatic.
•
You cannot activate the camera while
on an active call or while browsing files in the
media gallery.
Resolution options are 1280 x 1024 (best
for printing), 640 x 480, 320 x 240 (best
for sending to email), and 160 x 120.
Low Light Mode brightens the picture for
low light environments.
•
•
Once the camera is active, the home screen
acts as the viewfinder.
If you get a “Low memory” error, check your
resolution and quality compression settings.
See “Setting up the camera for photos” on
this page.
–
–
Self Timer options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when Multishot mode is activated.
Multishot allows you to take up to six
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken.
Shutter Sound sets the sound used when
the camera takes a picture.
•
•
If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
Menu settings and options can only be
accessed when the camera is active.
–
Accessing camera mode
1. Open flip.
–
–
2. Press
- or -
White Balance allows the camera to adjust
for different lighting. Options are
Automatic, Fluorescent, Incandescent,
or Daylight.
select Menu → Camera.
Setting up the camera
for photos
1. Select Menu → Camera.
–
Color Tone sets the color tone of
the picture.
2. Press
to select Options.
48
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Quality sets the picture compression. The
higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
LED flashes a light to indicate a picture
has been taken. Options are On (default)
and Off.
Menu options for camera mode
1. Press
activate camera mode.
2. Select Options.
3. Press up or down to scroll through the
options on the vertical menu bar:
or press Menu → Camera to
–
–
–
Settings displays available camera settings
you may set up prior to taking a picture.
Brightness allows you to adjust the
brightness of the image in the home
screen LCD.
Viewfinder Display options are Fullscreen
and Actual.
–
Restoring camera menu settings
–
–
–
Camera Pictures displays all pictures
taken and stored.
Last Picture displays the most recently
taken picture.
Frames allows you to add a frame or a
stamp to your picture. A frame or stamp
cannot be removed once it has been used
in a picture.
The following settings revert to the default setting
each time you enter and exit the camera
application:
–
Low Light Mode, Self Timer,
MultiShot, Viewfinder.
The following settings remain at the setting
you selected each time you enter and exit the
camera application:
Note: The picture resolution changes to
160 x 120 while taking pictures with frames.
The resolution returns to the original setting
once Frames is disabled.
–
Flash, Resolution, Shutter Sound, White
Balance, Quality, and LED.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
49
4. Take the picture using one of two methods:
Press or
to select OK or
when finished taking pictures.
Camera mode indicators
and icons
The camera mode displays the following onscreen
indicators and icons:
–
.
5. Press
to select Erase.
6. Press
Icon
Description
Flash on
Camera key map
Key
Camera
Menu Screen
Take picture
Dismiss menu options
Camera mode
Select Capture to
take picture
Select Options
Select OK
Top right corner
numbers
Number of
snapshots remaining
Cancel, dismisses
menu
Scrolls menu options
right
Scrolls menu options
left
Select menu option
Zoom level
Zoom in
Bottom left
corner numbers
Up
Resolution setting
Zoom out
Takes picture
Down
Multishot
Self Timer
Viewing a saved picture
1. Select Menu → Camera.
Taking a picture
1. Open flip.
2. Press
to select Options.
3. Press
down to select Camera Pictures
2. Select Menu → Camera
- or -
and then press
.
4. Press
to scroll through the pictures and
to view it.
press
.
press
3. Focus on the image using the phone’s display
Press
for more options:
as the viewfinder.
–
Assign allows you to assign a picture to a
Contact, assign the picture as Wallpaper,
or a Screen Saver.
Tip: Press
up or down to zoom in or
zoom out.
50
Using the Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
Modify options are Rotate, Resize,
Brightness, Sharpness, Saturation, Hue,
Auto Adjust, Color Tone. Only unlocked
pictures can be modified.
Zoom is available by scrolling up (zoom
in) or down (zoom out) with the scroll
keys. When zoomed to maximum or
minimum a tone plays.
–
–
Take Picture allows you to take a picture.
Lock allows you to lock or unlock a
picture for editing. If a file is locked, you
cannot erase, rename, or modify the file.
Rename allows you to edit the name of a
picture file.
–
–
Details allows you to view details of
the picture.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
51
10 USING MEDIA GALLERY
The Media Gallery stores camera pictures,
images, and sounds in the phone and displays
those files on the phone’s screen.
–
Modify press
to select Options.
Options are Rotate, Resize, Brightness,
Sharpness, Saturation, Hue, Auto Adjust,
Color Tone. Only unlocked pictures can be
modified.
Take Picture to snap another photo.
Lock to prevent accidentally erasing
the photo.
Accessing files
1. Select Menu → Media Gallery.
2. Select an option:
–
–
–
–
Camera Pictures displays thumbnails of
the photos you have taken in
chronological order.
Images displays a list of categories that
contain preloaded, downloaded, saved, or
created files such as wallpaper, screen
savers, or caller IDs.
–
–
Rename the photo.
Details of the file.
Browsing images
The images menu allows you to assign your files
to various applications.
–
Sounds displays a list of categories that
contain saved or downloaded sounds such
as ringers and voice memos.
1. Select Menu → Media Gallery → Images.
2. Highlight an option and press
:
–
–
–
Saved Images displays available images.
Wallpapers displays wallpaper selections.
Screen Savers displays available
screensavers.
Browsing pictures
1. Select Menu → Media Gallery →
Camera Pictures.
–
–
Caller IDs displays pictures and images
saved and the text IDs you assigned them.
Doodles saved from Doodler.
2. Highlight a picture and press
to
select View.
3. Press
to select Options:
3. Press
to select Options (options vary
–
Assign picture as a Caller ID or
as wallpaper.
Zoom allows you to zoom in or out on
the picture.
according to selection):
–
–
Assign to assign the image to a contact.
Details gives you the file size of the image.
–
52
Using Media Gallery
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Erase All erases all images stored (images
must not be locked).
4. Select Close or press
when done.
Browsing sounds
1. Select Menu → Media Gallery → Sounds.
2. Highlight an option and press
:
–
–
–
Saved Sounds contains sounds saved on
your phone.
Ringers contains ringers saved on
your phone.
Voice Memos contains voice memos you
made to yourself.
3. Highlight an option and press
(options vary according to selection):
–
–
–
Assign to assign the ringer to a contact.
Play to review the sound.
Record New allows you to record
new sounds.
–
–
Erase the sound.
Lock to prevent accidentally erasing
the sound.
–
Rename allows you to rename the
sound file.
–
–
Details gives you the file size of the sound.
Erase All erases all sounds stored.
4. Select Close when done.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
53
11 USING TOOLS AND GAMES
Naming a saved voice memo
1. Select Menu → Tools & Games →
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
Voice Memo → Recorded Memos.
2. Highlight the memo and select Options.
Recording a voice memo
3. Select Rename.
1. Select Menu → Tools & Games →
Voice Memo → Record New.
- or -
4. Press and hold
to clear the
default name.
5. Use the keypad to enter a name for the memo.
Press and hold
right.
6. Select Save.
2. Say your memo and press
to select Stop.
3. Select Save to save your memo.
Erasing a saved voice memo
1. Select Menu → Tools & Games →
Note: If an incoming call is received while you’re
recording a memo, the memo is saved and the
incoming call screen appears.
Voice Memo → Recorded Memos.
2. Highlight the memo and select Options.
3. Select Erase. The prompt “Erase file?”
Playing or reviewing a voice memo
1. Select Menu → Tools & Games →
appears.
4. Select Yes or No.
Voice Memo → Recorded Memos.
2. Highlight the voice memo to review and
Scheduler
The Scheduler allows you to schedule events and
set reminder alerts.
select Play.
3. Press
and press
right and left to select a function
to perform it:
Creating an event
1. Select Menu → Tools & Games →
Play
Stop
Pause
Scheduler → Add New Event.
2. Enter a name for the event and press
down. For help entering text, see page 17.
54
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select Options and classify the type of event
and press : Meeting, Phone Call,
9. Press
to set the reminder sound.
–
Select an option and press
.
Birthday, Anniversary, Vacation, Medical,
or Other.
10. Press
to select a Silent Mode setting
–
Select No or During Event and press
11. Press to select whether or not this is a
recurring event.
.
4. Press
to change the date of the event (the
current date is the default date of the event).
–
–
–
Press
left or right to move between
–
Select an option and press
: No, Daily,
the month, day, and year fields.
Weekly, Monthly, or Annually.
Press
month, day, or year.
up or down to change the
12. Select Save.
Press
to save your changes.
Editing, erasing, or sending an event
1. Select Menu → Tools & Games →
Scheduler → View Month.
2. Press
5. Press
to set the time of the event.
–
–
–
Press
left or right to move between
the hour, minute, and AM/PM fields.
up, down, left or right to highlight
the day with the event to view, edit, or erase
Press
hour, minute, or AM/PM.
Press to save your changes.
up or down to change the
and press
3. Press
and press
4. Press
.
up or down to highlight the event
.
6. Press
to set the duration of the event.
to select Options.
–
–
–
Press left or right to move between
5. Select Edit, Erase, or Send and press
.
the hour and minute fields.
Press up or down to change the
hour and minute.
Press to save your changes.
–
–
–
For more information about editing the
event, see “Scheduler” on page 54.
To erase the event, highlight Erase and
press
. Press
to confirm.
7. Press
to set the priority of the event.
For more information about sending the
event, see “Sending and Receiving Text
Messages” on page 24.
–
Press to select an option: None, High,
Medium, or Low.
8. Press
to set a reminder of the event.
–
Select an option and press .
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Setting the QuickAlarm
1. Select Menu → Tools & Games →
Alarm Clock
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
Alarm Clock.
2. Highlight QuickAlarm and select Set.
Note: The alert occurs only if the phone is on.
3. Select an option and press
minutes (default), 30 minutes, or 60 minutes.
A message appears telling you the
QuickAlarm is On.
: 5 minutes, 15
Setting an alarm clock
1. Select Menu → Tools & Games →
Alarm Clock.
2. Highlight one of the alarms and select Set.
4. When the alarm rings, select Off to turn off the
alarm or Reset to set the QuickAlarm again.
3. Use the phone keypad to enter numbers and
to switch between AM and PM.
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include with a bill.
–
Press
hours, minutes, and AM/PM fields.
Press up or down to change the
hours, minutes, and AM/PM options.
4. Press to set the time of the alarm.
5. Select Options to set the alarm sound.
6. Highlight an option and press
7. Select Options to set the recurring time.
8. Highlight an option and press
9. Enter a note for the alarm and press
10. Press to select Save and set the alarm(s).
left or right to move between
–
1. Select Menu → Tools & Games →
Tip Calculator.
2. Enter the amount of your bill.
3. Select Next.
.
4. Select the amount you want to include as a tip
(10%, 15%, 18%, 20%, Other) and press
. Your total bill appears, including tip.
.
.
5. To split the bill, press
to select Split.
6. Press to clear the default of 2 guests.
11. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
7. Enter the number of guests and press
select Next. The amount each guest pays
is calculated.
to
Note: Opening the flip turns off the alarm.
8. Select Done.
56
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Calculator
Use the calculator for basic
mathematical equations.
Timer
This timer counts down for a specified amount
of time. It beeps when that amount of time
has elapsed.
1. Select Menu → Tools & Games → Calculator.
2. Use the keypad to enter numbers.
1. Select Menu → Tools & Games → Timer.
2. Select Set.
3. Use
to select mathematical operations:
–
Press
or right.
to move the cursor left
Left x (multiply) Up + (add)
Right
Down
- (subtract)
÷ (divide)
–
Press
up or down to set the hours,
4. Press
to calculate the result. Example:
minutes, and seconds.
Enter 5, press
then press
left to select X, enter 2,
to obtain the result of 10.
3. Select Start to begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
5. Press
- or -
to return to the home screen.
4. Select Sound to set the alarm sound and
press
.
Press
to clear the screen.
5. Press
or
to silence the alarm.
Options
Adds displayed digit to the value
stored in memory.
M+
MR
MC
Stopwatch
1. Select Menu → Tools & Games →
Displays currently stored value on
screen.
Stopwatch.
2. Select Start to begin counting.
Select Stop to stop counting.
Clears value currently stored in
memory.
Select Reset to clear the counter.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Games
Brick Attack
The games in this section may not be available
on your phone. Check with your service provider
for availability.
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of
the screen.
If you receive an incoming call alert while you are
playing a game, the game is paused and exited.
You can return to play once the call alert ends.
Games do not remain paused if the phone is
turned off or loses power.
1. Select Menu → Tools & Games →
Brick Attack.
2. Press
to select Yes at the prompt, “Turn
off backlight to conserve battery?”
3. Press
to select New.
Gamepad Keymap setting
If you have purchased a Kyocera Gamepad, this
setting allows you to modify the gamepad keymap.
–
To pause the game, press
press to Resume.
To move the paddle, press
or right.
To exit the game, highlight Exit and
, then
–
–
left
1. Connect the Kyocera Gamepad to the phone.
2. Select Menu → Settings →
Gamepad Keymap.
press
.
–
–
Edit allows you to modify the gamepad key
mappings.
Race 21
Reset resets the gamepad to the factory
This game is a timed variation of Black Jack. Each
game comprises three 90-second rounds. To
score points, add cards in each of the four
columns, trying to reach but not exceed 21 in
each column during the course of the game.
default settings.
Note: To purchase a Gamepad, call 800-349-
4188 (U.S.A. only), 858-882-1410, or visit
1. Select Menu → Tools & Games → Race 21.
2. Press
to select Yes at the prompt, “Turn
off backlight to conserve battery?”
58
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select New Game. The first card to be placed
is shown at the top left of the screen. Press a
key to add a card to the row as follows:
–
–
Scoreboard provides you with the top
five scores.
Music plays music with this game. Select
from Music Always, Sound Effects,
Instructions, Credits, During Title, or
No Music.
Add cards to the first row.
Add cards to the second row.
Add cards to the third row.
7. Press
to end all games.
Add cards to the fourth row.
Doodler
You can create and save graphics on your phone.
Shortcut: Press
left or right to choose
arrows at the bottom of the screen then press
to add cards to corresponding rows.
1. Select Menu → Tools & Games → Doodler.
2. Select New Doodle to open the drawing screen
The cursor is located in the middle of
the screen.
Note: Each time you place a card, a new card
appears for placement.
4. Continue placing cards until you are satisfied
3. Select Options to choose the Colors, Tools,
with your selections.
Lines, or Shape you want to use.
–
–
–
You can pause or end the game at any time
by pressing
4. Use keys 1–9 or
to
.
move the cursor around the
screen as indicated.
You lose points each time you exceed 21
in a column.
5. When finished, select
Options → Save. The
image is saved to
Select Skip to skip one card per round.
5. Press
to select
to get your score
and advance to the next round.
Media Gallery.
To move the cursor away from the drawing:
6. Select an option and press
to select it.
1. Select Options → Colors and Tools.
–
New Game initiates game play. To pause
the game, press . From here you can
choose Resume, New or Quit.
2. Select
then Done.
3. Press a number key to move the cursor.
–
Resume Game returns you to the game
you were last playing.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
59
To erase part of a drawing:
Saving a doodle
1. Select Options → Colors and Tools.
It is a good idea to save the doodle while you are
working on it. If you receive a call while creating
an unsaved doodle, it will be lost.
2. Select
then Done.
3. Press a number key to move the eraser.
•
Select Options → Save. The image will be
saved in Menu → Media Gallery →
Images → Doodles.
To Navigate: Use the following keys to doodle.
To:
Use:
Select Options
Resuming a doodle
To return to another saved doodle:
Clear screen
•
Select Menu → Tools & Games →
Doodler → Resume Doodle.
- or -
Select Menu→ Media Gallery →
Images → Doodles.
Shortcut to Colors & Tools
Draw, erase, or move cursor/
shape UP
up
Draw, erase, or move cursor/
shape DOWN
down
left
Draw, erase, or move cursor/
shape LEFT
Draw, erase, or move cursor/
shape RIGHT
right
Return cursor to center
Previous screen
60
Using Tools and Games
Download from Www.Somanuals.com. All Manuals Search And Download.
12 CONNECTING TO THE INTERNET
–
–
An underline and an arrow indicate that
Using the Web Browser
there is more text. Press
view more text. Press
the previous screen.
down to
to return to
You can use your phone to browse the Internet if
you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
To choose a site, highlight it and press
to select Go.
Note: You cannot receive incoming calls while
you are using Web Browser.
4. When you have finished using the Internet,
press to exit the Web Browser.
Launching the Web Browser
1. Select Menu → Web Browser.
Using the Web menu options
The following options may appear on your screen:
A message about airtime fees appears every
time you start the browser.
•
Home returns you to the main Web Browser
window, or home page.
For more information about how airtime is
charged, contact your service provider.
•
•
•
Mark Site saves the current location as a
bookmark for easy access.
2. Press
to continue.
Bookmarks displays a list of your saved
Web sites.
If this is the first time you have connected to
the Internet, a message informs you that
security is not yet enabled for your
Web Browser.
Setup gives you options for changing how
information is displayed.
–
–
Show URL displays the entire URL.
3. Press
to select Yes to enable security.
About Openwave displays information
When you are connected, a browser home
page appears. It has a list of bookmarks and
some Web menu options at the bottom of
the screen.
about your Web Browser version.
–
Encryption should not be used unless you
are instructed to do so by your
service provider.
–
A
appears in a secure session.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
61
–
–
UP.Link selects a different browser server.
You can use this option if you have more
than one Web Browser account.
Restart restarts the Web Browser.
Searching for a Web site
How you search for a Web site depends on
your service provider. For more information,
contact your service provider.
Going to a bookmarked site
1. Select Menu → Web Browser. If you see a
message prompt, press
to continue.
2. From your Web home page, select
Bookmarks. A list of bookmarks appears.
3. Enter the number corresponding to the
bookmark you want and press
.
Checking Net alerts
Alerts received from a Web site are sent to your
Browser Alerts inbox.
1. Select Menu → Messages → Browser Alerts.
This action launches the browser inbox.
2. Press
to accept browser fees.
3. Select an alert and follow the prompts.
62
Connecting to the Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
13 GETTING HELP
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
Customer support
Your service provider’s customer support
department may be accessible directly from your
phone when you dial a number, such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail. For
questions about the phone features, refer to the
materials provided with your phone, or visit
www.kyocera-wireless.com. For additional
questions, you may contact the Kyocera Wireless
Corp. Customer Care Center in any of the
following ways:
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
•
•
The name of your service provider.
The actual error message or problem you
are experiencing.
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
•
•
–
To locate the ESN select Menu →
Phone Info → Build Info and scroll down
to ESN: for the 11-digit number.
•
•
•
Web site: www.kyocera-wireless.com
Email: [email protected]
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401.
Customer support phone numbers are also
available in the following countries:
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
•
Phone accessories
Argentina:
Australia:
Brazil:
0-800-666-0052
1-800-507-000
0-800-55-2362
To shop for K322 phone accessories, visit
www.kyocera-wireless.com/store. You may also
call us at 800-349-4188 (U.S.A. only) or
858-882-1410.
Chile:
800-43-1212
Colombia:
India:
01-800-700-1546
Toll free#: 1-600-121214
Toll#: 0124-284-5000
001-866-650-5103
Become a product evaluator
Mexico:
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones,
New Zealand: 0-800-990-100
Panama:
Peru:
001-800-201-1984
0-800-51-934
visit beta.kyocera-wireless.com.
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
63
INDEX
Numerics
1-Touch dialing, 13
creating, 38
hard pause, 20
D
I
A
data/fax setup, 14, 42
digital mode, 8
icons, 8
Alarm Clock, 8
alarm clock, 56
alerts
for headsets, 38
for messages, 38
for missed calls, 11
analog mode, 8
auto-hyphenation, 40
contacts, 22
messages, 27
InBox, 28
display contrast, 40
Doodler, 59
E
K
emergency
Key descriptions, 3
calls, 13
L
emergency mode, 14
exit emergency mode, 14
position location, 8, 43
erasing
language, 39
lights
B
lights-only mode, 8, 36
banner, 39
battery, 1
blocking outgoing calls, 41
Brick Attack, 58
limiting calls out, 41
lock code, 41
locking
contact entries, 22, 42
text messages, 29
expert mode, 47
phone, 41
F
C
M
fast find, 23
fax mode, 42
finding contact information, 23
frequent contacts, 23
calculator, 57
call counters, 14
callback number, 25
calls
memory
saving, 29
menu view, 39
N
answering, 9
G
number mode, 17
missed, 11
games
redialing, 10
O
Brick Attack, 58
Doodler, 59
Race 21, 58
camera
OutBox, 27
menu options, 49
sending a picture, 49
setting up, 50
taking a picture, 50
color themes, 40
Com Port speed, 42
contacts directory, 20
contrast, 40
P
phone numbers
H
verifying your own, 7
hands-free car kit
answering using voice, 46
purchasing, 63
hands-free headset
and phone ringer, 38
jack, 4
phone, unlocking, 41
position location, 8, 43
Q
QuickAlarm, 56
QuickText, 25, 30
countdown timer, 57
custom menu
purchasing, 63
64
Download from Www.Somanuals.com. All Manuals Search And Download.
R
U
Race 21, 58
recent call icons, 12
resetting the phone, iv
ringers
unlocking the phone, 41
V
vibrate, 8, 36
Voice Answer, 46
voice dialing, 44
voice memo
erasing, 54
naming, 54
recording, 54
voicemail, 13
setting up, 6
volume
choosing types, 36
for contacts, 21
for roaming calls, 15
silencing, 6
volume, 37
roaming, 8
alerts, 15
controlling, 14
ringer, 15
earpiece, 9, 37
key beep, 37
ringer, 37
S
scheduler, 54
screen contrast, 40
screen icons, 8, 17, 27, 36
screen savers, 40
secret contacts, 12, 22
security, 41
W
wallpaper, 40
Web Browser, 61
sent messages, 27
silent mode, 8, 36
smart sound, 37
smiley mode, 18
speed dialing, 22
stopwatch, 57
symbol mode, 18
T
technical support, 63
text entry, 17
quick reference, 19
text messages, 24
time format, 41
timer, 57
timing calls, 14
tip calculator, 56
TTY/TDD, 43
User Guide for the Kyocera K322 Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
|