Kyocera Cell Phone K312 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
The standards include a substantial safety margin  
designed to assure the safety of all persons,  
regardless of age and health.  
Additional information on SAR can be found on the  
Cellular Telecommunications and Internet  
Association (CTIA) web-site at  
The exposure standard for wireless mobile phones  
employs a unit of measurement known as the  
Specific Absorption Rate, or SAR. The SAR limit  
set by the FCC is 1.6 W/kg.*  
* In the United States and Canada, the SAR limit  
for mobile phones used by the public is 1.6 watts/  
kg (W/kg) averaged over one gram of tissue. The  
standard incorporates a substantial margin of  
safety to give additional protection for the public  
and to account for any variations in measurements.  
Tests for SAR are conducted using standard  
operating positions specified by the FCC with the  
phone transmitting at its highest certified power  
level in all tested frequency bands.  
Caution  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value.  
The user is cautioned that changes or  
modifications not expressly approved by the party  
responsible for compliance could void the warranty  
and user’s authority to operate the equipment.  
This is because the phone is designed to operate  
at multiple power levels so as to use only the  
power required to reach the network. In general,  
the closer you are to a wireless base station  
antenna, the lower the power output.  
Optimize your phone’s performance  
Use the guidelines on page 2 to learn how to  
optimize the performance and life of your phone  
and battery.  
Before a phone model is available for sale to the  
public, it must be tested and certified to the FCC  
that it does not exceed the limit established by the  
government-adopted requirement for safe  
exposure. The tests are performed in positions and  
locations (e.g., at the ear and worn on the body) as  
required by the FCC for each model.  
Air bags  
If your vehicle has an air bag, DO NOT place  
installed or portable phone equipment or other  
objects over the air bag or in the air bag  
deployment area. If equipment is not properly  
installed, you and your passengers risk  
serious injury.  
Body-worn measurements differ among phone  
models, depending upon availability of accessories  
and FCC requirements. While there may be  
differences between the SAR levels of various  
phones and at various positions, they all meet the  
government requirement for safe exposure.  
Medical devices  
PacemakersWarning to pacemaker wearers:  
Wireless phones, when in the ‘on’ position, have  
been shown to interfere with pacemakers. The  
phone should be kept at least six (6) inches away  
from the pacemaker to reduce risk.  
The FCC has granted an Equipment Authorization  
for this model phone with all reported SAR levels  
evaluated as in compliance with the FCC RF  
emission guidelines. SAR information on this  
model phone is on file with the FCC and can be  
found under the Display Grant section  
The Health Industry Manufacturers Association  
and the wireless technology research community  
recommend that you follow these guidelines to  
minimize the potential for interference.  
Always keep the phone at least six inches  
(15 centimeters) away from your pacemaker  
when the phone is turned on.  
http://www.fcc.gov/oet/fccid after searching on the  
FCC ID: OVFKWC-K24.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Do not carry your phone near your heart.  
Use the ear opposite the pacemaker.  
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked.  
They include:  
If you have any reason to suspect that  
interference is taking place, turn off your  
phone immediately.  
fueling areas such as gas stations  
below deck on boats  
Hearing aids—Some digital wireless phones may  
interfere with hearing aids. In the event of such  
interference, you may want to consult your service  
provider or call the customer service line to  
discuss alternatives.  
transfer or storage facilities for fuel or  
chemicals  
vehicles using liquefied petroleum gas, such as  
propane or butane  
areas where the air contains chemicals or  
particles such as grain, dust, or metal powders  
Other medical devices—If you use any other  
personal medical device, consult the manufacturer  
of the device to determine if it is adequately  
shielded from external RF energy. Your physician  
may be able to help you obtain this information.  
any other area where you would normally be  
advised to turn off your vehicle engine  
Use with care  
In health care facilities—Turn your phone off in  
health care facilities when instructed. Hospitals  
and health care facilities may be using equipment  
that is sensitive to external RF energy.  
Use only in normal position (to ear). Avoid  
dropping, hitting, bending, or sitting on the phone.  
Keep phone dry  
If the phone gets wet, turn the power off  
immediately and contact your dealer. Water  
damage may not be covered under warranty.  
Potentially unsafe areas  
Posted facilities—Turn your phone off in any facility  
when posted notices require you to do so.  
Resetting the phone  
Aircraft—FCC regulations prohibit using your  
phone on a plane that is in the air. Turn your phone  
off or switch it to Airplane Mode before  
boarding aircraft.  
If the screen seems frozen and the keypad does  
not respond to key presses, reset the phone by  
completing the following steps:  
1. Remove the battery door.  
Vehicles—RF signals may affect improperly  
installed or inadequately shielded electronic  
systems in motor vehicles. Check with the  
manufacturer of the device to determine if it is  
adequately shielded from external RF energy.  
2. Remove and replace the battery.  
If the problem persists, return the phone to the  
dealer for service.  
Accessories  
Blasting areas—Turn off your phone where blasting  
is in progress. Observe restrictions, and follow any  
regulations or rules.  
Use only Kyocera-approved accessories with  
Kyocera phones. Use of any unauthorized  
accessories may be dangerous and will invalidate  
the phone warranty if said accessories cause  
damage or a defect to the phone.  
Potentially explosive atmospheres—Turn off your  
phone when you are in any area with a potentially  
explosive atmosphere. Obey all signs and  
instructions. Sparks in such areas could cause an  
explosion or fire, resulting in bodily injury or death.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Frequency (RF) energy  
Battery and charger specifications  
Charger Input  
Your telephone is a radio transmitter and receiver.  
When it is on, it receives and sends out RF energy.  
Your service provider’s network controls the power  
of the RF signal. This power level can range from  
0.006 to 0.6 watts.  
Output  
CV90-G2588-01 100-240VAC 50/60Hz 0.2A  
CV90-G2589-01 100-240VAC 50/60Hz 0.3A  
Standard Battery:  
4.2VDC 0.6A  
4.5VDC 1.2A  
In August 1996, the U.S. Federal Communications  
Commission (FCC) adopted RF exposure  
guidelines with safety levels for hand-held wireless  
phones. These guidelines are consistent with the  
safety standards previously set by both U.S. and  
international standards bodies in the  
CV90-P3030-05 3.7V 1000mAh  
Kyocera Wireless Corp.  
following reports:  
10300 Campus Point Drive, San Diego, CA 92121  
U.S.A.  
ANSI C95.1 (American National Standards  
Institute, 1992)  
NCRP Report 86 (National Council on  
Radiation Protection and  
Measurements, 1986)  
ICNIRP (International Commission on  
Non-Ionizing Radiation Protection, 1996)  
Your phone complies with the standards set by  
these reports and the FCC guidelines.  
E911 mandates  
Where service is available, this handset complies  
with the Phase I and Phase II E911 Mandates  
issued by the FCC.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
v
CONTENTS  
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1  
Installing the battery. . . . . . . . . . . . . . . . . . . . 1  
Getting to know your phone . . . . . . . . . . . . . . 3  
Choosing ringers . . . . . . . . . . . . . . . . . . . . . 34  
Setting sounds for your phone . . . . . . . . . . . 35  
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . 36  
Personalizing the screen . . . . . . . . . . . . . . . 37  
Creating a secure environment. . . . . . . . . . . 39  
Setting position location. . . . . . . . . . . . . . . . 42  
Using Voice Recognition . . . . . . . . . . . . 43  
Setting up voice dialing . . . . . . . . . . . . . . . . 43  
Making a call using voice tags . . . . . . . . . . . 43  
Making a call using digit dialing. . . . . . . . . . 44  
Training voice recognition . . . . . . . . . . . . . . 45  
2
Making and Answering Calls . . . . . . . . . . 8  
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Silencing an incoming call . . . . . . . . . . . . . . . 9  
Using the speakerphone. . . . . . . . . . . . . . . . . 9  
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . 11  
Setting up voicemail . . . . . . . . . . . . . . . . . . . 12  
Understanding roaming . . . . . . . . . . . . . . . . 13  
Using your phone in an airplane . . . . . . . . . 14  
8
9
3
4
Entering Letters, Numbers,  
and Symbols . . . . . . . . . . . . . . . . . . . . . . 15  
Using the Camera . . . . . . . . . . . . . . . . . . 46  
Taking a picture. . . . . . . . . . . . . . . . . . . . . . 48  
Camera key map . . . . . . . . . . . . . . . . . . . . . 48  
Storing Contacts . . . . . . . . . . . . . . . . . . . 18  
Creating a new contact . . . . . . . . . . . . . . . . . 18  
Adding a code or extension . . . . . . . . . . . . . 18  
Customizing your contacts . . . . . . . . . . . . . . 18  
Editing a contact . . . . . . . . . . . . . . . . . . . . . 20  
Erasing a contact . . . . . . . . . . . . . . . . . . . . . 20  
Sending a vCard . . . . . . . . . . . . . . . . . . . . . . 20  
Customizing a phone number. . . . . . . . . . . . 20  
Finding contact information . . . . . . . . . . . . . 21  
10 Using Media Gallery . . . . . . . . . . . . . . . . 49  
Accessing files . . . . . . . . . . . . . . . . . . . . . . . 49  
11 Using Tools and Games . . . . . . . . . . . . . 51  
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . 51  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Alarm Clock. . . . . . . . . . . . . . . . . . . . . . . . . 53  
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . 53  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
5
6
Sending and Receiving  
Text Messages . . . . . . . . . . . . . . . . . . . . . 22  
Sending text messages . . . . . . . . . . . . . . . . . 22  
Retrieving text messages. . . . . . . . . . . . . . . . 26  
Customizing message settings. . . . . . . . . . . . 27  
12 Connecting to the Internet . . . . . . . . . . . 58  
Using the Web Browser . . . . . . . . . . . . . . . . 58  
13 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 60  
Sending and Receiving  
Multimedia Messages . . . . . . . . . . . . . . . 29  
Sending multimedia messages . . . . . . . . . . . 29  
Receiving multimedia messages . . . . . . . . . . 30  
Viewing multimedia messages . . . . . . . . . . . 31  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
7
Customizing Your Phone . . . . . . . . . . . . 33  
Silencing all sounds . . . . . . . . . . . . . . . . . . . 34  
vi  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
GETTING STARTED  
Installing the battery  
Charging the battery  
Your Kyocera K312 phone comes with a  
removable lithium ion (LiIon) battery. Fully  
charge the battery before using the phone.  
You must have at least a  
partial charge in the battery  
to make or receive calls.  
You must use a Kyocera-authenticated battery in  
your phone. If you attempt to use a battery that has  
not been authenticated you will receive a security  
warning. Contact your service provider to obtain a  
Kyocera-authenticated battery.  
To charge the battery:  
1. Connect the AC adapter  
to the jack on the bottom  
of the phone.  
2. Plug the adapter into a wall outlet.  
To install the battery:  
The battery icon in the upper-right corner of the  
screen tells you whether the phone is:  
1. Hold the phone  
face down.  
Charging (the icon is animated)  
Partially charged  
Fully charged  
2. Slide the battery door  
downward to remove it.  
3. Place the battery in the  
phone casing with the  
metal contacts facing  
towards the bottom of  
the phone.  
Note: The battery will not charge if you use the  
phone while it is connected to an AC adapter.  
Recharging the battery  
You can safely recharge the battery at any time,  
even if it has a partial charge.  
4. Replace the battery door  
by sliding the notches into  
the openings at the  
Note: To remove the battery, make sure the phone  
is powered off.  
bottom and outside edges  
of the battery casing.  
5. Slide the door up to  
secure the cover  
into place.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Caring for the battery  
Accessing keypad shortcuts  
General safety guidelines  
Navigation key  
shortcuts  
Do not take apart, puncture, or short-circuit  
the battery.  
From the home screen, press the navigation key in  
one of four directions to access three shortcuts  
and one custom menu (see page 36 for  
If you have not used the battery for more than  
a month, recharge it before using your phone.  
Avoid exposing the battery to extreme  
temperatures, direct sunlight, or  
high humidity.  
instructions on setting up your custom menu).  
Never dispose of any battery in or near a  
fire. It could explode.  
Common causes of battery drain  
Playing games or using the Web.  
Taking pictures with the flash on.  
Keeping backlighting on.  
Operating in analog ( ) mode. Your phone  
switches between modes to find the best  
signal. To set your phone to operate in a single  
mode, select Menu Settings →  
Network Digital/Analog.  
Operating in digital mode when far away from  
a base station or cell site.  
Using data cables or accessories.  
Operating when no service is available, or  
service is available intermittently.  
High earpiece and ringer volume settings.  
Repeating sound, vibration, or lighted alerts.  
2
Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting to know your phone  
The phone is shown here in open position. When the phone is closed, the keys are locked to prevent  
accidental key presses.  
Home screen.  
1
2
Speakerphone key activates the speakerphone and answers  
incoming calls.  
Left softkey accesses menus and functions.  
3
4
Send/Talk key starts or answers a call. Press once to activate  
voice dialing, twice to display the Recent Calls list, and three  
times to redial the last number dialed.  
Keypad for entering numbers, letters, or symbols.  
* Shift key changes the text mode in text entry.  
5
6
7
8
0 Next key cycles through word choices during text entry.  
Right softkey accesses the Contacts directory and other  
menu options.  
Navigation key scrolls through lists and text entry fields and  
9
accesses shortcuts from the home screen.  
OK key selects a menu item or option.  
10  
11  
End/Power key turns the phone on and off, ends a call or  
browser session, and returns you to the home screen.  
Back key erases characters in text entry and returns you to  
the previous screen.  
12  
13  
Space # key enters a space during text entry. Press and hold to activate or deactivate Silent mode.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Jack for Hands-free Headset only (sold separately).  
14  
15  
16  
Volume key to raise or lower orienting volume.  
Camera key activates Camera mode. To activate Camera mode,  
press and hold until you hear two beeps.  
Camera lens.  
17  
18  
Camera Flash/Message Indicator Light light flashes when  
taking a picture or lights when you have a message or missed  
call.  
External screen displays time, caller ID, signal and  
battery strength.  
Jack for AC adapter (included) and data cable  
19  
20  
(sold separately).  
Warning: Inserting an accessory into the incorrect jack will damage the phone.  
4
Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using menus  
The contents of the main menu are as follows:  
Recent Calls  
All Calls  
Messages  
New Text Msg  
New Picture Msg*  
Voicemail  
InBox  
Browser Alerts*  
Sent  
OutBox*  
Saved  
Drafts  
Media Gallery  
Camera Pictures  
Images  
Tools & Games  
Brick Attack  
Race 21TM  
Doodler  
Voice Memo  
Scheduler  
Alarm Clock  
Tip Calculator  
Calculator  
Timer  
Phone Info  
Build Info  
Icon Keys  
Incoming Calls  
Outgoing Calls  
Missed Calls  
Erase Call Lists  
Recent Calls Timer  
All Calls Timer  
Contacts  
View All  
Add New  
View Groups  
Speed Dial List  
Voice Dial List  
Information  
Sounds  
BREW Apps**  
Settings  
Silent Mode  
Sounds  
Display  
Convenience  
Voice Features  
Messaging  
Security  
Network  
Accessories  
Msg Settings  
Group Lists*  
Erase Messages  
Stopwatch  
Web Browser*  
Launches the  
browser  
Camera  
Launches the camera  
* Not available on all phones. Check with your service provider.  
** Menu name varies by service provider.  
Accessing menu items  
From the home screen, press  
to  
In this guide, an arrow tells you to select an  
option from a menu.  
select Menu.  
Press  
Press  
to select Contacts.  
left, right, up, or down to see  
For example, Menu Settings means select  
Menu, then select the Settings option.  
menus and options.  
Note: To change the way the menus appear, see  
“Choosing a menu view” on page 37 for details.  
Press  
Press  
Press  
to select a menu item.  
to back up a menu level.  
to return to the home screen.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Performing basic functions  
To...  
From the home screen...  
Turn the phone on  
Turn the phone off  
Make a call  
Press  
Press and hold  
Enter the number and press  
and wait until the phone beeps.  
until the phone beeps.  
.
End a call  
Press  
Press  
.
.
Answer a call  
Access voicemail  
Verify your phone number  
Press and hold  
and follow the system prompts.  
Select Menu Phone Info Build Info.  
Silence the ringer on an  
incoming call  
Press  
Press  
or  
then  
to answer.  
Activate voice dialing  
Launch the browser  
Record a voice memo  
Access Recent Calls list  
Take a picture  
once and follow the prompts (see page 43).  
Press and hold  
Press and hold  
left.  
right.  
Press  
down.  
Press and hold camera key  
. Focus on the image and press  
to select Capture.  
6
Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Understanding screen icons  
These icons may appear on your phone’s screen.  
High-speed (3G) data service is available  
and active on your phone. Check with  
your service provider for availability.  
(blinking) The phone is sending  
high-speed data.  
(blinking) The phone is receiving  
high-speed data.  
High-speed data service is available, but  
the phone is dormant.  
The phone is operating in IS2000 (1X)  
digital mode.  
The phone is operating in IS95  
digital mode.  
The phone is operating in Analog  
(FM) mode.  
The phone is receiving a signal. You can  
make and receive calls. Fewer bars  
indicate a weaker signal.  
The phone is at the home screen. To  
A call is in progress.  
access Menu, press  
The phone is at the home screen. To  
access Contacts, press  
.
The phone is not receiving a signal. You  
cannot make or receive calls.  
.
The phone is set to light up instead  
of ring.  
The phone is roaming outside of its  
home service area.  
The phone is set to vibrate or to vibrate  
and then ring.  
Position location is set to your service  
provider and to emergency services.  
Position location is set to emergency  
services only.  
You have a text message.  
You have a voice message.  
The phone is in camera mode.  
Camera flash mode is ready.  
Camera zoom mode is ready.  
The battery is fully charged. The more  
black bars, the greater the charge.  
The alarm clock is set.  
The phone is in privacy mode or is  
accessing a secure Web site.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
2
MAKING AND ANSWERING CALLS  
4. Follow the prompts.  
Making a call  
Make sure you are in an area where a signal can  
5. Press  
to end the call.  
be received. Look for the  
symbol on the home  
Answering a call  
screen. The more bars you see in this symbol, the  
stronger the signal. If there are no bars, move to  
where the signal strength is better.  
When a call comes in, the phone rings, vibrates,  
or lights up. The phone number of the caller also  
appears if it is not restricted. If the number is  
stored in your Contacts directory, the contact  
name appears.  
When the phone has been idle for a time, it  
changes to power save mode. When you see  
“Power Save” on your phone’s screen, press any  
key to return to normal operating mode.  
Press  
-or-  
to answer the incoming call.  
1. Open the flip.  
2. Enter the phone number and press  
.
Press  
to answer the incoming call and  
turn on the speakerphone.  
3. Press or close the flip to end the call.  
Answering calls using the flip  
Voice number dialing  
You can set the phone to answer immediately  
when you open the flip. This feature does not  
apply to incoming data or fax calls.  
Voice dialing requires that a contact be saved with  
a voice tag. See page 43.  
1. Press  
to initiate voice dialing.  
Select Menu Settings Convenience →  
Open to Answer Enabled.  
2. Say the name of the contact when prompted  
“Say a name.” The phone places the call.  
Select Disabled to have the phone  
continue ringing when you open the flip.  
3. Press  
once.  
Digit dialing  
1. Press  
to initiate voice dialing.  
2. When prompted say “dial”.  
3. When prompted “Speak a digit”, say a digit.  
After the voice recognizer repeats the digit say  
the next digit.  
8
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the volume during a call  
Using the speakerphone  
Your Kyocera K312 phone has a built-in  
speakerphone.  
To adjust the earpiece volume during a call,  
press up or down.  
To turn on the speaker, press  
press during an incoming call alert, you  
answer the call.  
. If you  
Silencing an incoming call  
Press  
or  
.
Note: In the absence of voicemail, this feature  
drops the call.  
The  
icon at the top of the phone screen  
indicates that the speakerphone is on.  
- or -  
To turn off the speakerphone, press  
.
Press  
then press  
to answer the call.  
Setting the phone to hold calls  
This action silences the current call only. The next  
call will ring as normal.  
The Hold Call feature allows you to place  
incoming calls on hold until you are ready to  
answer them.  
Redialing a number  
To redial a recent call, press  
open your Recent Calls list. Highlight a phone  
number or name and press  
Tip: To redial the last number called,  
received, or missed, press three times.  
twice to  
Note: This feature will not work if “Open to  
Answer” is enabled. See “Answering calls using  
the flip” on page 8.  
.
1. Select Menu Settings →  
Convenience Hold Call Enabled.  
If you have not recorded a hold message,  
you will be prompted to record one, such  
as “Please hold. I’ll answer in a minute.”  
Calling a saved number  
If you have already saved a phone number, you  
can use the Contacts list to find it quickly.  
2. Record the message twice, as prompted.  
1. From the home screen, press  
to  
3. Select Save or Options (Play, Re-Record,  
select Contacts.  
or Exit).  
2. Scroll down the list to find the contact you  
The next time a call comes in, you will have the  
option of placing it on hold.  
want to call.  
3. Highlight the name and press  
to dial  
the number.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
To return the call, press  
then press  
to select Calls  
Placing a call on hold  
.
You can place a call on hold once you have  
enabled this feature.  
Setting missed call alerts  
You can set an alert to beep every five minutes  
after you have missed a call.  
Note: If you are already on a call and you receive  
another call, you cannot place the incoming call  
on hold. It will go to voicemail.  
1. Select Menu Settings Sounds →  
1. When a call comes in, press  
to select  
Alerts Missed Call Alert.  
Hold Call. The caller will be placed on hold  
and will hear your recorded hold message.  
2. Select an option and press  
.
2. To speak to the caller, select Answer.  
Viewing recent call details  
- or -  
Details on the last 60 calls you made, received, or  
missed are stored in the Recent Calls list and are  
identified by the following icons:  
To hang up without speaking to the caller,  
select End Call.  
Outgoing call  
Incoming call  
Changing the hold message  
1. Select Menu Settings →  
Convenience Hold Call →  
Missed call (flashing)  
Re-Record Msg and follow the prompts.  
Viewing recent calls  
2. Record the message twice.  
1. Select Menu Recent Calls.  
3. Select Save or Options (Play, Re-Record,  
2. Select a list: All Calls, Incoming Calls,  
or Exit).  
Outgoing Calls, or Missed Calls.  
3. Select a recent call item and press  
to  
Dealing with missed calls  
select Options, options may vary:  
When you have missed a call, “Missed Call”  
appears on your screen unless the caller  
leaves a voicemail.  
Save adds the phone number to the  
Contacts list.  
Send Text Msg sends a text message to  
the contact.  
Send Picture Msg sends a picture message  
to the contact. *Check with your service  
provider for availability.  
To clear the screen, press  
to select OK.  
To view details of the call, press  
to select  
Calls then press  
.
10  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erase Record erases the selected  
call record.  
To add a speed dial location to a saved or new  
contact, see “Customizing a phone number”  
on page 20.  
Note: If the phone number has been classified as  
“secret,” you must enter your four-digit lock code  
to view or edit it. For information on the lock  
code, see “Changing your lock code” on page 39.  
To classify a phone number as secret, see  
“Creating a new contact” on page 18.  
Using speed dialing  
To call a contact that has a speed dial location:  
From the home screen, enter the one- or two-  
digit speed dialing location and press  
.
Calling recent calls  
1-Touch dialing  
1-Touch dialing is the fastest way to speed dial a  
contact that has a speed dial location.  
1. Press and hold  
down.  
2. Highlight the number you want to call and  
press  
- or -  
.
Note: You must (1) enable 1-Touch dialing on  
your phone and (2) have a speed dial location  
assigned to a contact.  
1. Select Menu Recent Calls →  
Outgoing Calls.  
Enabling 1-Touch dialing  
2. Highlight the number you want to call and  
Select Menu Settings Convenience →  
press  
.
1-Touch Dialing Enabled.  
Erasing recent calls  
Using 1-Touch dialing  
1. Select Menu Recent Calls →  
To call a contact that has a speed dial location:  
Erase Call Lists.  
From the home screen, press and hold the  
speed dialing number. If it is a two-digit  
number, press the first digit briefly, then press  
and hold the second digit. For example, if the  
2. Select an option: All Calls, Incoming Calls,  
Outgoing Calls, or Missed Calls.  
3. Press  
to select Yes.  
speed dialing location is 15, press  
then press and hold  
briefly,  
Speed dialing  
.
Before you can use speed dialing, you must save a  
phone number as a contact and assign a speed  
dial location to it.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
You can set the phone to beep or vibrate  
every five minutes to remind you that you  
have voicemail.  
Setting up voicemail  
Before your phone can receive voicemail  
messages, you must set up a password and record  
a personal greeting with your service provider.  
When you have set up your voicemail, all  
unanswered calls to your phone are automatically  
transferred to voicemail, even if your phone is in  
use or turned off.  
See “Setting message alerts” on page 36.  
Calling emergency services  
Note: Regardless of your 3-digit emergency code  
(911, 111, 999, 000, etc.), your phone operates  
as described below.  
1. From the home screen, press and hold  
.
Dial your 3-digit emergency code and  
press  
2. Follow the system prompts to create a  
.
password and record a greeting.  
You can call the code even if your phone is locked  
or your account is restricted. When you call, your  
phone enters Emergency mode. This enables the  
emergency service exclusive access to your phone  
to call you back, if necessary. To make or receive  
regular calls after dialing the code, you must exit  
this mode.  
Note: If you are having trouble accessing your  
voicemail, contact your service provider.  
Checking voicemail messages  
When a voice message is received, your screen  
displays “New Messages” along with the  
symbol at the top of your screen. The symbol  
flashes if the message is urgent.  
To exit Emergency mode  
When you have completed the emergency call:  
1. Press Exit.  
If you see “New Messages”  
1. Press  
to your voicemail number.  
2. Follow the prompts to retrieve the message.  
To clear the screen without checking messages:  
Press to select Ignore.  
to select Call, which initiates a call  
2. Press Exit again to confirm your choice.  
Note: To determine who has access to your  
location, see “Setting position location” on  
page 42.  
If you see only the  
symbol  
Tracking calls  
You can track the number and duration of calls  
made and received on your phone.  
1. Press and hold  
to initiate a call to your  
voicemail number.  
2. Follow the prompts to retrieve the message.  
1. Select Menu Recent Calls.  
12  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Select a timer:  
2. Select an option and press  
.
Recent Calls Timer tracks all calls you  
have made and received since you last  
reset this timer. To reset this timer to zero,  
Automatic automatically switches the  
phone between digital and analog.  
Analog only sets the phone to work in  
analog mode only.  
Analog call forces a call into analog mode  
for the duration of the next call.  
Digital only sets the phone to work in  
digital mode only.  
press  
to select Reset.  
All Calls Timer tracks all calls you have  
made and received. This timer cannot  
be reset.  
Timing your calls  
You can set your phone to beep 10 seconds  
Setting an alert for roaming  
You may use this setting if you want the phone to  
alert you when you roam outside of your home  
service area.  
before each minute passes when you are on a call.  
Select Menu Settings Sounds →  
Minute Alert Enabled.  
1. Select Menu Settings Network →  
Roam/Svc Alert.  
Receiving data or faxes  
2. Select an option and press  
.
Your phone may be able to receive certain data or  
faxes, depending on the system sending the  
information. For more information, see page 41.  
When no svc alerts you with three tones  
decreasing in pitch when service is lost  
and three tones increasing in pitch when  
service is acquired again.  
Understanding roaming  
On roam change alerts you with two  
decreasing tones when roaming service is  
acquired and three increasing tones when  
home area service is acquired again.  
On any change alerts you with three  
increasing tones if there is a change in  
roaming service or three decreasing tones  
if the phone loses service.  
Controlling network roaming  
Depending on services available from your  
service provider, you may set the phone to either  
digital or analog mode. This is useful if you are in an  
area that borders on digital service and the  
automatic feature is causing the phone to keep  
switching between modes.  
1. Select Menu Settings Network →  
Digital/Analog.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Please check with uniformed personnel before  
operating your phone in Airplane mode.  
Setting the roam ringer  
You can set a ringer to indicate when an incoming  
call will be subject to roaming charges.  
Setting Airplane mode  
Select Menu Settings Sounds →  
Roam Ringer Enabled.  
1. Select Menu Settings →  
Convenience Airplane Mode.  
2. Select OK after reading the message.  
Setting Call Guard  
3. Select Disabled or Enabled.  
You can set the phone to warn you before you  
answer or place a call while roaming.  
Select Menu Settings Convenience →  
Call Guard Call prompt.  
The phone now emits a distinctive roam  
ring to indicate when you are roaming  
during calls.  
To accept or place a call while roaming,  
you must press  
.
Note: Call Prompt is disabled when the phone is  
in Emergency Mode.  
Using your phone in an airplane  
While in an airplane, it is normally required that  
you turn off your mobile phone because it emits  
RF signals that interfere with air traffic control.  
In Airplane mode, however, your phone will not  
emit RF signals. You cannot make or receive calls,  
send text messages, or use the Web, but you can  
play games, use the Scheduler, set the clock, and  
make emergency calls to designated  
emergency numbers.  
14  
Making and Answering Calls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
ENTERING LETTERS, NUMBERS, AND SYMBOLS  
You can enter letters, numbers, and symbols in  
contacts, text messages, and your banner.  
Entering numbers  
To enter a number while in  
a number key once.  
mode, press  
or  
Understanding text entry  
screens  
The current text entry mode (and capitalization  
setting, when applicable) are indicated by icons.  
To enter a number while in  
mode, press and hold a number key until the  
number appears on the screen.  
Entering words letter by letter  
characters  
remaining  
capitalization setting  
text entry mode  
1. Press a key once for the first letter, twice for  
the second letter, and so on. If your phone is  
set to Spanish, French, or Portuguese,  
accented letters are available.  
text entry  
fields  
2. Wait for the cursor to move right and enter the  
next letter.  
Note: To enter a space, press  
.
Text entry modes  
There are six text entry modes:  
Entering words quickly  
When you press a series of keys using  
checks its dictionary of common words and  
guesses at the word you are trying to spell.  
mode,  
Case change  
Rapid Entry  
Add Symbol  
Add Smiley  
Numbers only  
Normal alpha  
1. For each letter of the word you want, press the  
key once. For example, to enter the word  
Note: The mode you start in depends on the task  
you are doing. For example, when entering a  
phone number, you’re in number mode. When  
entering a name for a contact, you’re in normal  
text mode. See “Changing modes” on page 16.  
“any” press  
2. If the word doesn’t match what you want,  
press to look at other word matches.  
3. When you see the word you want, press  
.
.
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Entering symbols  
Changing modes  
While entering text in normal text mode, you can  
Sometimes you need to change modes. For  
enter symbols by pressing  
until you see the  
example, to enter numbers in an email address  
symbol you want. Using this method, you have  
access to the  
following symbols:  
while in  
mode, enter the numbers, and then change  
back to mode to complete the address.  
To change text entry modes:  
mode, you must change to  
.
@ ?  
To access the full set of symbols:  
1. From the text entry screen, select Options.  
!
-
,
&
:
1
Press and hold  
until the icon for the  
mode you want appears at the top of  
the screen.  
2. Select  
Add Symbol.  
-or-  
3. Press  
up or down to view the list of  
Select Options then select a different mode.  
symbols.  
4. Press the number key corresponding to the  
Capitalization settings  
You can change capitalization at any time while  
symbol you want.  
entering text. Simply press  
or lower case while in  
to choose upper  
Normal Alpha mode.  
Entering smileys  
1. From the text entry screen, select Options.  
2. Select  
Add Smiley.  
3. Press  
up or down to view the list  
of smileys.  
4. Press the number key corresponding to the  
smiley you want.  
Switching default text entry modes  
You can change the default text entry mode when  
creating a text message. This setting applies only  
to the message body screen, not the “To” screen.  
1. Select Menu Messages →  
Msg Settings Default Text.  
2. Select Normal Alpha or Rapid Mode.  
16  
Entering Letters, Numbers, and Symbols  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick reference to text entry  
This table gives general instructions for entering letters, numbers, and symbols.  
To...  
Do this...  
Enter a letter  
Use  
mode and press a key until you see the letter you  
want. For more information, see page 15.  
Enter a number  
Enter a symbol  
Enter a smiley  
Use mode and press a key once to enter its number.  
For more options, see page 15.  
In normal text mode, press  
you want. See page 16.  
until you find the symbol  
Use  
mode and press a key once to enter its number.  
For more options, see page 16.  
Enter a space  
Press  
Press  
.
Erase a character  
.
Erase all characters  
Move the cursor right or left  
Move the cursor up or down  
Change text entry modes  
Capitalize any letter  
Lowercase any letter  
Initial Caps  
Press and hold  
.
Press  
Press  
right or left.  
up or down.  
Press and hold  
.
In  
In  
In  
mode, press  
mode, press  
mode, press  
. Choose  
. Choose  
. Choose  
or  
.
.
.
Select soft options on the screen  
Press the appropriate key,  
.
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
4
STORING CONTACTS  
Use your phone’s Contacts directory to store  
information about a person or company. Each  
contact entry can have up to six phone numbers,  
two email addresses, two Web addresses, two  
street addresses, and a space for notes.  
Adding a code or extension  
When you save the phone number of an  
automated service, you may include a pause to  
stop dialing, for example, where you would wait  
to dial an extension.  
1. From the home screen, enter the phone  
Creating a new contact  
number.  
1. From the home screen, enter the phone  
number you want to save, including the  
area code.  
2. Press  
to select Options.  
3. Select a type of pause:  
Time Pause causes the phone to  
stop dialing for two seconds.  
Hard Pause causes the phone to  
stop dialing until you select  
Options Release while making the call.  
2. Press  
to select Save.  
3. Press  
to select Save New Contact.  
4. Enter a name for the contact.  
If you need to learn how to enter letters,  
see “Understanding text entry screens” on  
page 15.  
4. Enter the remaining numbers.  
5. Press to select Save.  
To add a symbol or smiley to the contact  
name, or to change the text entry mode,  
Customizing your contacts  
press  
to select Options.  
You can customize each contact in your Contacts  
directory by assigning ringers, pictures, and  
number types, or by classifying your contacts as  
Personal or Business.  
5. Either save now or add more contact  
information.  
To save now, press  
to select Save.  
To enter additional phone numbers, email  
and Web addresses, or notes, press  
down repeatedly. For help switching  
between numbers and letters for email or  
Web addresses, see “Changing modes” on  
page 16.  
Assigning ringers  
1. Press  
to select Contacts.  
2. Highlight a contact and press  
.
3. Highlight the contact name and press  
to  
select Options.  
18  
Storing Contacts  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Select Ringer Assign Ringer.  
Assigning number types  
5. Scroll down the list to hear the different  
When you assign a number type, an icon is placed  
in front of a contact number to specify the type of  
number, such as work, home, or mobile.  
ringers and press  
to select one.  
Assigning pictures  
1. Press  
to select Contacts.  
1. Press  
to select Contacts.  
2. Highlight a contact and press  
.
2. Highlight a contact and press  
.
Highlight the contact number and press  
to select Edit.  
3. Highlight the contact name and press  
to  
select Options.  
3. Press  
down once and press  
.
4. Select Picture Assign Picture Images.  
5. Select Saved Images or Caller IDs.  
4. Highlight an option to designate the number  
as General, Work, Home, Mobile, Pager, or  
Fax and press  
. You can also add email  
Note: With mobile PhoneTools for Kyocera,  
you can transfer digital pictures to your  
phone. To purchase MPT or other  
accessories, visit  
addresses, street addresses, Web page URLs,  
and a note. The associated icon will appear  
next to the entry in your Contacts directory  
and Recent Calls list.  
6. Scroll through the list to view your options  
general  
work  
fax  
and press  
to assign it to your contact.  
Classifying contacts as Personal or  
Business  
email address  
street address  
1. Press  
2. Highlight a contact and press  
3. Highlight the contact’s phone number and  
press to select Options.  
to select Contacts.  
home  
.
mobile  
pager  
Web page URL  
note  
4. Select Add to Group.  
5. Select Personal or Business and press  
.
Note: To assign Personal or Business ringers, see  
“Assigning business and personal ringers” on  
page 34.  
5. Press  
to select Save.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Editing a contact  
1. Press  
Customizing a phone number  
1. Press  
to select Contacts.  
to select Contacts.  
2. Highlight a contact and press  
.
2. Highlight the contact to edit and press  
.
3. Highlight the contact name or number and  
press to select Edit.  
3. Press  
down to highlight the  
contact number.  
4. Enter your changes and press  
to  
4. Press  
to select Options.  
select Save.  
5. Highlight an option and press  
:
*Check with your service provider for  
availability.  
Erasing a contact  
1. Press  
to select Contacts.  
Call to call the contact.  
*Send Text Msg brings you to the text  
messaging screen.  
2. Highlight the contact to erase and press  
3. Select Options.  
.
4. Highlight Erase Contact and press  
.
*Send Picture Msg brings you to the  
picture messaging screen.  
Add Speed Dial assigns or removes the  
speed dial location.  
View Number to see the selected phone  
number.  
5. Press  
to confirm.  
Sending a vCard  
You can send contact information as a  
text message.  
Erase Number erases the number from  
the contact.  
1. Press  
to select Contacts.  
2. Highlight the contact to send as a vCard and  
Secret makes the number secret so that it  
will not appear on the screen until the  
lock code is entered. Secret numbers can  
be called without a lock code. (For more  
information, see “Limiting calls” on  
page 40.)  
press  
.
3. Press  
to select Options.  
4. Highlight Send as vCard and press  
.
Select an option:  
via EMS  
Primary Number makes this number  
the first one that shows up when you open  
the contact.  
5. Enter a recipient’s phone number and press  
to select Send.  
20  
Storing Contacts  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Send as Vcard send contact information  
as a text message.  
The menu skips to that letter of the alphabet.  
- or -  
Add to Group adds the number to a group.  
Add Voice Dial to record a voice tag so you  
can call a contact using voice recognition  
(VR). For more information, see page 43.  
Erase Voice Dial erases the voice tag  
associated with the number.  
Select Menu Contacts.  
2. Select a search method:  
View All lists all saved contacts.  
Speed Dial List, Voice Dial List,  
View Groups selects a contact from the  
specified list.  
Edit Voice Dial records a new voice tag.  
3. Highlight a contact and press  
To call the contact, highlight the number  
and press  
.
6. Enter the new information and follow  
the prompts.  
.
7. Select Save, if necessary.  
Setting Fast Find  
Finding contact information  
With Fast Find, you press one or two keys to view  
close matches of the number you are looking for.  
To find a phone number or contact, you can (1)  
check the Frequent list, (2) search the Contacts  
directory, or (3) use Fast Find.  
Select Menu Settings Convenience →  
Fast Find Enabled.  
Checking the Frequent List  
Using Fast Find  
From the home screen, select Contacts. The last  
15 of your most frequently called contacts appear  
when the Frequent List is enabled. Scroll past the  
double line to view the All Contacts list.  
1. From the home screen, press the keys  
corresponding to the letters of the name you  
want to find. A matching contact or speed dial  
entry appears.  
2. Press  
down to scroll through  
To enable the Frequent List setting  
matching entries.  
Select Menu Settings Convenience →  
3. Highlight the name you want and then press  
Frequent List Enabled.  
to call the number.  
Searching the Contacts directory  
1. Select Contacts for a list of all contacts.  
To quickly get down the list, enter the first  
letter of the contact.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
5
SENDING AND RECEIVING TEXT MESSAGES  
This chapter describes how to send, receive, and  
erase text messages from your phone. For  
information on voicemail messages, see “Setting  
up voicemail” on page 12.  
Press  
to select Options then select  
Recent List, Contacts, or Group Lists.  
- or -  
Enter a space or comma after the first  
number then enter another recipient  
manually.  
Important: The features and menus described in  
this chapter may vary depending on services  
available in your area. Check with your service  
provider for details and possible usage charges.  
Note: You can send a message to up to 10  
recipients at once. The messages will be sent  
one at a time, once to each addressee.  
Sending text messages  
You can only send text messages to phones that are  
capable of receiving them or to email addresses.  
4. When you are done entering addresses,  
press  
twice.  
5. Enter the message. To learn how to enter text,  
see “Understanding text entry screens” on  
page 15.  
Creating a text message  
1. Select Menu Messages New Text Msg.  
2. Enter a recipient’s phone number or email  
- or -  
Add QuickText, symbols, or smileys to your  
message. See “Including prewritten text and  
symbols” on page 22 for information.  
address:  
Select Options to access your Recent List,  
Contacts, or Group Lists and press  
Select a contact and press  
Highlight the number field and press  
.
6. Press  
to select Send. See “Setting sending  
.
options” on page 23 for information about  
how and when you want the message to  
be received.  
.
For more about group lists, see “Creating  
group lists” on page 27.  
- or -  
Including prewritten text and symbols  
Enter a New Address manually. (To learn  
how to enter text, see “Understanding text  
entry screens” on page 15.)  
During text entry, you can insert QuickText,  
symbols, or smileys into your message.  
1. From the text entry screen, select Options.  
3. Add another recipient if desired:  
22  
Sending and Receiving Text Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Select an option and press  
:
Save Message saves the message in  
your Drafts folder. This prevents the  
message from being deleted if you have  
activated AutoErase and enables you to  
send the message to others.  
Save QuickText saves the message you  
have just entered as a prewritten message  
then returns to the message entry screen  
so you can send the message.  
Insert QuickText: Scroll through the list of  
options and press to select one.  
Add Symbol: Scroll through the list and  
press the corresponding number key to  
select it.  
Add Smiley: Scroll through the list and  
press the corresponding number key to  
select it.  
Settings allows you to choose from the  
3. When you have finished your message, select  
Send. See “Setting sending options” for  
information about how and when you want the  
message to be received.  
following after pressing  
:
Set Priority labels the message as  
“Urgent.”  
Callback Number includes a callback  
number with the message to let recipients  
know at what number they can call you  
back. Select OK to include your own  
number or Edit to enter a different  
callback number.  
Setting sending options  
When you are ready to send a message, you have  
several options for how and when you want the  
message to be received.  
1. Once you have completed the message,  
Send Later schedules a time to send  
the message.  
select Options:  
Add Address returns to the “Send To”  
screen to add another recipient without  
losing the message. Select Options to  
access your Recent List, Contacts, or  
Validity period allows you to set a defined  
expiration time limit for a message.  
2. When you have finished setting options, press  
to return to the message window.  
Group Lists and press  
.
Select a contact and press  
.
3. Press  
to select Send.  
Highlight the number field and press  
.
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Adding a signature  
Understanding appended messages.  
capitalization setting  
characters  
remaining  
The signature you create is included at the end of  
all outgoing messages and is counted as  
text entry mode  
characters in your messages; however, it does not  
appear in the message creation screen.  
text entry  
fields  
To create a signature:  
1. Select Menu Settings Messaging →  
Signature.  
If you go over the character limit for a single  
message, the phone may automatically append an  
empty segment to your message to make space.  
2. Enter your signature in the text field.  
3. Select OK to save the setting.  
Note: The characters in the signature are  
included in the total character count of the  
message. See the note under step 5 in “Creating a  
text message” on page 22.  
Note: Not available on all phones. Check with  
your service provider.  
Important: Your service provider will charge you  
for each message segment.  
If you cannot send messages  
When you start a message, the maximum  
character limit appears once you are in the  
message entry field. This number counts down as  
you enter characters, until it reaches 0.  
You may not be able to send or receive messages  
if your phone’s memory is nearly full, or if digital  
service is not available at the time. To free up  
memory, erase old messages. See “Erasing  
messages” on page 27.  
If you continue to enter text after this counter  
reaches 0, a message segment may be appended.  
When you reach the message size limit, you are  
prompted to edit the message or alerted that the  
message is being appended.  
Note: Does not apply to all phones. Check with  
your service provider for information.  
24  
Sending and Receiving Text Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press  
up or down to scroll through the  
Receiving incoming calls while  
creating messages  
list of messages. One of the following symbols  
appears next to each message:  
If you don’t wish to answer the call, press  
to select Ignore. The phone returns to the  
message screen.  
The scheduled message will be sent at the  
scheduled time. You cannot cancel  
delivery of the message.  
To answer the call, press  
. Your message  
is saved to the Drafts folder. To return to the  
message, select Menu Messages →  
Drafts Resume.  
The scheduled message has been sent and  
will be delivered as scheduled. You  
cannot cancel delivery of the message.  
Viewing your sent messages  
The message has been received.  
To save your outgoing messages, you must first  
The message has been received and  
opened. (This symbol may not be  
available. Check with your service  
provider.)  
enable Save to Sent.  
1. Select Menu Messages →  
Msg Settings Save to Sent.  
2. Select an option and press  
.
The message has been sent to more than  
one recipient.  
Enabled automatically saves all  
successfully sent messages in the  
Sent folder.  
Prompt allows you to choose whether or  
not to save your message when you send it.  
The message has never been sent or has  
not been sent since it was last modified.  
You can cancel delivery of the message.  
To view successfully sent messages:  
1. Select Menu Messages Sent.  
Viewing failed or pending messages  
Failed or pending messages are stored in  
your OutBox. To view your OutBox:  
1. Select Menu Messages OutBox. A list of  
all failed or pending messages appears.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
2. Scroll through the list of messages and press  
to read one. One of the following  
If you see the  
symbol  
1. Select Menu Messages InBox. A list of  
symbols appears next to each message:  
all your received messages appears.  
indicates an “Urgent” message.  
The message is pending and will be sent  
when possible. You can cancel delivery of  
the message.  
2. Scroll through the list of messages and press  
to read one.  
The message cannot be sent  
because service is not available. An alert  
appears on your phone if the message  
cannot be sent.  
Reading the message  
The options available to you may vary. Check with  
your service provider.  
1. If the text message is long, press  
down  
to view the entire message.  
2. When you are finished, you can Reply to the  
sender, Erase the message, Save the message  
to your Saved folder, or set additional Options  
for the message:  
Retrieving text messages  
When a text message is received, your screen  
displays “New Messages” with the  
symbol at  
the top of your screen. The symbol flashes if the  
message is urgent.  
Erase the message.  
Lock Msg to protect the message from  
being accidentally deleted.  
If you see the “New Messages” note  
To view the message, press  
to select  
Forward the message.  
InBox, highlight the message, and press  
to select View.  
Reply with Copy to reply to the message  
with a copy of the original attached.  
Save Message to save the message.  
Save as QuickText to save the text from the  
message as QuickText, which you can  
insert into other messages. Graphics are  
not saved as part of QuickText.(For more  
about QuickText, see page 28.)  
View Sender information.  
To Ignore the message, press  
.
Note: If you receive a new message while you are  
reading a message, the one you are reading will  
be replaced by the new one. You can find the  
older message in the InBox:  
Select Menu Messages InBox.  
3. Select Done.  
26  
Sending and Receiving Text Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: The  
symbol indicates that a graphic did  
Erasing all messages  
not come through. It may be too large or  
incorrectly formatted.  
1. Select Menu Messages →  
Erase Messages.  
2. Select a folder from which to erase all  
messages: InBox, OutBox, Sent, Saved Folder,  
Drafts Folder, or All Messages. To erase  
messages from all folders, select  
All Messages.  
Setting message alerts  
You can set your phone to alert you of incoming  
text messages. For more information, see “Setting  
message alerts” on page 36.  
3. A message appears: “Erase all messages?”  
Erasing messages  
It is a good idea to erase old messages to free up  
memory in your phone.  
Select Yes to erase messages or No to cancel.  
Erasing messages automatically  
You have the option of erasing text messages and  
pages as you send or read them, erasing them one  
at a time from the list in the OutBox or InBox, or  
erasing them all at once.  
Use this setting to have old messages  
automatically erased when memory is low.  
Select Menu Messages →  
Msg Settings Auto-Erase →  
InBox Msgs.  
Erasing single messages  
1. Select Menu Messages.  
2. Select the type of text message you want to  
Older messages will be erased as new  
messages are received.  
erase and press  
or Saved.  
: InBox, OutBox, Sent,  
Customizing message settings  
To make messaging easier, you can customize  
settings for sending and receiving messages.  
3. Highlight the message to erase and  
press  
.
4. Select Options.  
Creating group lists  
5. Select Erase to erase the message. A message  
You can create and save a list of multiple  
recipients. Your Kyocera K312 phone stores five  
group lists with up to 10 recipients per list.  
appears: “Erase this message?”  
6. Select Yes to erase the message.  
1. Select Menu Messages Group Lists →  
Note: You can erase a scheduled message from  
the OutBox, but you cannot cancel delivery of  
the message.  
Create New.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
2. Enter a name for the list. For help entering  
text, see “Understanding text entry screens”  
on page 15.  
2. To create a new pre-written message,  
select New Msg.  
-or-  
To edit an existing pre-written message,  
highlight the message and select Edit.  
3. Select Next.  
4. To enter the first phone number or email  
3. Enter or edit the text and press  
Save. For help entering text, see  
“Understanding text entry screens” on  
page 15.  
to select  
address, select an option:  
Recent List to select numbers from your  
Recent List.  
Enter from scratch to enter the phone  
number or email address manually.  
Contacts List to select numbers from your  
phone book.  
Note: You can also save a message you have  
written or received as QuickText. See “Setting  
sending options” on page 23 or “Reading the  
message” on page 26.  
5. Locate the contact number and press  
.
6. Select Options Recent List or Contacts.  
7. Locate the contact number and press  
.
8. When finished, select Done.  
9. To send a message to your new group, see  
“Sending text messages” on page 22.  
Creating and editing prewritten  
messages (QuickText)  
Your phone comes with prewritten (QuickText)  
messages, such as “Please call me,” which you  
can insert into the body of a text message. You can  
edit these messages and create new ones. Your  
phone will store up to 40 QuickText messages,  
with up to 100 characters per message.  
1. Select Menu Messages →  
Msg Settings Edit QuickText.  
28  
Sending and Receiving Text Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
SENDING AND RECEIVING MULTIMEDIA MESSAGES  
You can choose to send a copy or blind copy.  
To show or hide these fields see “Hide or Show  
CC/BCC fields” on page 30.  
Sending multimedia messages  
You can only send multimedia messages to  
phones that are capable of receiving them or to  
email addresses.  
4. Press  
down to enter a recipient in the  
CC or BCC fields.  
Note: Multimedia messaging is not available on  
all phones. Check with your service provider.  
5. Press  
down to enter a message in the  
Subject field. Choose a method:  
Multimedia messages have a predetermined  
character and file size limit. When you reach the  
character and file size limit for a single  
multimedia message, you must edit the message  
to meet the size limitation. For details, check with  
your service provider.  
Enter the subject text manually, or  
Press  
to select Options.  
6. Press  
down once or select Next to enter  
a brief text message in the Text field.  
7. Press  
down to enter the  
Image field.  
Creating a multimedia message  
Note: You may add only one picture or one  
sound per multimedia message.  
1. Select Menu Messages →  
New Picture Msg.  
8. Press  
to select Options. Select an option:  
2. Enter the recipient’s phone number or email  
Take Picture to instantly take a new photo and  
address in the To field.  
attach it to your message.  
3. To add additional recipients:  
Media Gallery to access all picture and sound  
Enter a space or comma after the first  
phone number or email address, then  
enter another recipient manually, or  
files in the phone:  
Camera Pictures displays your photos  
taken in a table/thumbnail view.  
Press  
to select Options. Then select  
• Highlight a photo to add to the  
multimedia message. Press  
to choose Select.  
Contacts or Group Lists. Press  
to  
select a recipient.  
Note: You can send one multimedia message  
to a maximum of 10 recipients.  
Images displays stored images on  
the phone.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
9. Press  
and press  
down to enter the Sound field  
to select Options. Choose:  
Hide or Show CC/BCC fields  
You can choose to hide the copy and blind  
copy fields.  
Record Sound to instantly record a new sound  
and attach it to your message.  
To hide CC/BCC: Select Menu Messages →  
Msg Settings Hide CC/BCC.  
To show CC/BCC: Select Menu Messages →  
Msg Settings Show CC/BCC.  
Media Gallery to display a list of categories  
that contain saved or downloaded sounds and  
voice memos.  
Highlight Saved Sounds.  
Press to select Open.  
Highlight a sound to add to the multimedia  
message. Press to Select.  
Receiving multimedia messages  
There are two settings for receiving a multimedia  
message on your K312 phone: Auto receive  
(default) and Prompt.  
Note: You may add only one new or stored  
sound per multimedia message sent.  
Auto receive mode  
10. Before sending your message, press  
to  
select additional Options. Choose:  
When a multimedia message is received, it is  
automatically downloaded onto your phone.  
Preview Message plays your multimedia  
message prior to sending.  
The alert “New Message(s)” appears along with  
the text “Message Received. View now?”  
Save Message allows you to save your  
multimedia message to the Drafts Folder  
and send it later.  
Add Address allows you to add additional  
addresses to your multimedia message  
prior to sending it.  
Message Priority allows you to send  
your multimedia message with Normal or  
Urgent priority.  
To View the multimedia message, press  
Tvo iew Later, press  
.
.
Note: If a multimedia message is received  
during a call, then the phone downloads the  
message approximately one minute after the last  
key is pressed.  
11. Press  
to select Send. This will send your  
multimedia message.  
30  
Sending and Receiving Multimedia Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press  
to select Options. Press  
Prompt mode  
down to highlight additional options for the  
multimedia message (options vary according  
to selection):  
When a multimedia message is received, your  
screen displays the alert “New Message(s)” along  
with the question “Retrieve Now?”  
Note: The options available to you may vary.  
Check with your service provider.  
To View the multimedia message, press  
.
Select Erase to never download the  
Mute to silence the message.  
multimedia message.  
Erase Msg allows you to delete the  
currently displayed multimedia message.  
Forward launches the message creation  
screen, allowing you to forward the  
multimedia message. The original address  
will not be shown, nor will the graphic,  
sound, and text fields.  
Tvo iew Later, press  
.
Note: If a multimedia message is received during  
a call, then the phone screen displays the alert  
“New Message(s)” after the call ends.  
To activate Prompt mode:  
1. Select Menu Messages Msg Settings.  
Lock Msg to avoid accidentally erasing it.  
Message Info displays multimedia  
message information (priority, sender,  
subject, time sent and received, and  
message size).  
2. Highlight Auto Retrieve and press  
.
3. Press  
and press  
up or down to select Disabled  
.
Note: Selecting Disabled will prompt you for  
download when a PIX alert is received.  
Play Video plays the video in the  
multimedia message.  
Replay plays the multimedia message  
again from the beginning.  
Done exits the multimedia message.  
Call initiates call to sender of  
multimedia message.  
Save Picture saves the currently  
viewed picture embedded in the  
multimedia message.  
Save Video saves the video embedded in  
the multimedia message.  
Save Sound saves the current sound  
embedded in the multimedia message.  
Viewing multimedia messages  
When you receive a multimedia message, a  
appears on your phone’s screen and remains until  
all messages are viewed. The message is stored in  
the InBox until the full message has been  
received, regardless of the auto receive or  
prompt setting.  
1. Press  
the message is long, press  
the entire multimedia message.  
to View the multimedia message. If  
down to view  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Save Address extracts email addresses,  
phone numbers, and/or URLs from the  
sender information and multimedia  
message body.  
Save as QuickText saves the text in the  
multimedia message to the QuickText list.  
Save Message saves the multimedia  
message to the Saved Folder on the phone.  
3. When you are finished viewing the multimedia  
message, select Reply or press  
.
32  
Sending and Receiving Multimedia Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
CUSTOMIZING YOUR PHONE  
The contents of the Settings menu are as follows.  
Silent Mode  
Vibrate Only  
Display  
My Banner  
Voice Features  
Add Voice Dial  
Network  
Data/Fax Calls  
Vibe then Ring  
Lights Only  
Normal Sounds  
Main Menu View  
Color Themes  
Wallpaper  
Screensaver  
Backlighting  
Auto-Hyphen  
Language  
Time/Date Format  
Contrast  
Brightness  
Erase Voice Dial  
Voice Training  
Voice Wake-Up  
Voice Answer  
Expert Mode  
Privacy Alert*  
Set Phone Line*  
Roam/Svc Alert  
Roam Option  
Digital/Analog  
Location  
Sounds  
Ringer Volume  
Ringer Type  
Business Ringer  
Personal Ringer  
Roam Ringer  
Flip Open  
Flip Closed  
Pwr On/Off Sound  
Key Volume  
Key Length  
Key Sound  
Alerts  
Smart Sound  
Minute Alert  
Earpiece Volume  
Spkrphone Volume  
Messaging  
Alerts  
Signature  
Accessories  
Pwr Backlighting  
Headset Ringing  
Auto Answer  
Com Port Speed  
TTY Device  
Edit QuickText  
Auto Retrieve  
Hide CC/BCC*  
Callback Number  
Text Msg Receipt  
Pict Msg Receipt*  
Block Msgs*  
Save to Sent  
Convenience  
Airplane Mode  
Open to Answer  
Fast Find  
Frequent List  
Block Msgs  
Hold Call  
1-Touch Dialing  
Web Prompt  
Call Guard  
Auto-Erase  
Default Text  
Voicemail Num.  
Security  
Lock Phone  
Limit Calls  
New Lock Code  
Erase Contacts  
Emergency Numbers  
*Not available on all phones. Check with your service provider.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Shortcut to Vibrate Only mode  
Press and hold  
Turning sounds back on  
Press and hold  
Silencing all sounds  
.
Your phone is set to make sounds when you  
receive calls, press keys, navigate through menus,  
receive alerts (such as new messages), open or  
close the flip, and when turning the phone on  
or off.  
.
Choosing ringers  
Your Kyocera K312 phone has multiple ringers  
you can choose to use for incoming calls.  
You can silence all sounds and set the phone to  
vibrate or light up when you receive calls  
and alerts.  
1. Select Menu Settings Sounds →  
Setting the phone to vibrate or light up  
Ringer Type.  
1. Select Menu Settings Silent Mode.  
2. Scroll down the list to hear the different rings.  
2. Choose an option and press  
:
You can also press  
to select Options to  
access ringers in your Saved Sounds folder.  
Vibrate Only: The phone vibrates for the  
duration of the incoming call or other  
alerts. appears.  
3. Press  
to select one.  
Note: Downloaded ringers are added to the end  
Vibe then Ring: The phone vibrates for the  
first 10 seconds and then rings for the  
remainder of the incoming call alert.  
appears.  
of the standard list of ringers.  
Assigning business and  
personal ringers  
Lights Only: The phone lights up for the  
duration of the incoming call or other  
alerts. appears.  
Normal Sounds: The phone rings for the  
incoming call or alert (in effect, returns  
phone to a non-silent mode).  
You can assign ringers to contacts classified as  
Business or Personal in your Contacts directory.  
Note: To classify a contact as Business or  
Personal, see page 18.  
1. Select Menu Settings Sounds.  
2. Ηighlight Business Ringer or Personal Ringer  
Note: The phone will ring when it is attached to  
an external power source (such as a charger),  
even if all sounds have been silenced.  
and press  
.
3. Select a ringer and press  
press to select Options to access ringers  
in your Saved Sounds folder.  
. You can also  
34  
Customizing Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the earpiece volume  
Setting sounds for your phone  
To adjust the earpiece volume manually during a  
You can set your phone to sound tones when you  
open and close the flip and when you turn the  
phone on and off. Sounds will not occur during  
an incoming call, if you are in a call, or if a  
headset or hands-free car kit is attached to  
your phone.  
call, press  
or  
up or down.  
To set the earpiece volume:  
1. Select Menu Settings Sounds →  
Earpiece Volume.  
2. Press  
right to increase the volume, or  
Set sound when flip opens  
1. Select Menu Settings Sounds →  
Flip Open.  
left to decrease the volume.  
3. Press  
to select Save.  
Using smart sound  
2. Scroll through the list to hear the sounds and  
You can set a baseline volume that the phone uses  
to automatically adjust the earpiece volume when  
there is a change in the amount of noise around  
you or the caller’s voice.  
press  
to select one.  
Set sound when flip closes  
1. Select Menu Settings Sounds →  
Flip Closed.  
Select Menu Settings Sounds →  
Smart SoundEnabled.  
2. Scroll through the list to hear the sounds and  
press  
to select one.  
Adjusting the ringer volume  
1. Select Menu Settings Sounds →  
Set sound when phone powers on  
or off  
Ringer Volume.  
2. Press  
right to increase the volume, or  
Select Menu Settings Sounds →  
left to decrease the volume.  
Pwr On/Off Sound Enabled.  
3. Press  
to select Save.  
To deselect this sound, select Disabled.  
Adjusting speakerphone volume  
1. Select Menu Settings Sounds →  
Spkrphone Volume.  
Adjusting volume  
You can adjust the earpiece, speakerphone, and  
ringer volume as well as key tones.  
2. Press  
right to increase the volume, or  
left to decrease the volume.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
3. Press  
to select Save.  
Vibrate & Remind, Beep & Remind, Fwy &  
Remind, Game & Remind, Bloop &  
Adjusting key tone volume  
Remind, Winner & Remind, Zilofon &  
Remind sets the phone to notify you once  
when a new message is received and then  
notify you again every five minutes. To stop  
You can change the volume of the tones the phone  
makes when you press the keys.  
1. Select Menu Settings Sounds →  
a reminder alert, press  
to  
Key Volume.  
select Ignore.  
Disabled turns off message alerts.  
2. Press  
right to increase the volume, or  
left to decrease the volume.  
3. Press  
to select Save.  
Using shortcuts  
From the home screen, press  
Setting key length  
in one of four  
directions to access three shortcuts and one  
custom menu.  
You can change the duration of the tones the  
phone makes when you press the keys.  
Up: Access your Custom Menu  
Down: Access Recent Calls  
Left: Launch Web Browser  
Right: Record Voice Memo  
1. Select Menu Settings Sounds →  
Key Length.  
2. Choose Normal or Long and press  
.
Setting message alerts  
You can choose how you want be alerted of  
incoming voicemail, pages, or text messages.  
Creating and updating your  
custom menu  
You can create a custom menu that contains your  
favorite features. After you set up your menu,  
1. Select Menu Settings Messaging →  
Alerts.  
simply press and hold  
up to access it.  
2. Select the type of alert: Message Alert,  
1. Press and hold  
up to launch  
Page Alert, or Voicemail Alert.  
Custom Menu.  
3. Press  
to select an option:  
2. Select Edit.  
Vibrate, Beep, Freeway, Game, Bloop,  
Winner, Zilofon sets the phone to alert you  
once when a new message is received.  
3. Scroll through the available options and press  
to select or deselect options.  
36  
Customizing Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You may select more than one feature.  
Items appear in alphabetical order in  
the menu.  
Graphic displays icons of each menu item,  
with its name at the bottom of the screen.  
List displays a list of each menu item.  
Wheel displays a rotating graphic image of  
the menu items.  
4. Press  
to select Save.  
Choosing a different language  
Your phone may display alternative languages.  
3. Press  
to return to the home screen. The  
next time you select Menu, you will see the  
menu view you selected.  
1. Select Menu Settings Display →  
Language.  
Adjusting the backlighting  
2. Select a language and press  
.
Your screen lights up while you are in a call or  
when you press a key on the keypad. However,  
you can set the length of time that bright  
backlighting remains on.  
Personalizing the screen  
Changing your banner  
1. Select Menu Settings Display →  
The banner is the personal label for your phone.  
It appears on the home screen above the time and  
date. The banner can be up to 14 characters long.  
Backlighting Duration.  
2. Select an option and press  
:
1. Select Menu Settings Display →  
7 seconds, 15 seconds, or 30 seconds—  
My Banner.  
(Default) Turn backlighting on for 7, 15,  
or 30 seconds after your last keypress.  
7 sec. & in call, 15 sec. & in call, or 30 sec.  
& in call—Turn backlighting on for the  
duration of a call, and for 7, 15, or 30  
seconds after your last keypress.  
2. Press  
to select Edit.  
3. Press  
to clear the screen.  
4. Enter your new text.  
5. Press  
to select Save.  
Note: The “in call” settings drain the battery  
more quickly.  
Choosing a menu view  
Three menu views are available: Wheel, Graphic,  
and List.  
1. Select Menu Settings Display →  
Main Menu View.  
2. Select an option and press  
.
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Using Power Save Mode  
Setting numbers to auto-hyphenate  
You can conserve battery life by activating Power  
Save mode to dim the backlight set in the  
procedure above. The backlighting appears for  
the selected duration but is less bright than with  
Power Save off.  
Auto-hyphenation, when enabled, automatically  
inserts hyphens into your phone numbers to be  
consistent with the U.S. dialing plan.  
For example, 1-222-333-4444.  
Select Menu Settings Display →  
Select Menu Settings Display →  
Backlighting Pwr Save Mode On.  
Auto-Hyphen Enabled.  
Selecting a screen saver  
Setting power backlighting  
Screen savers appear on the home screen when  
the flip is open or closed and are activated 10  
seconds after the last keypress. Incoming calls  
and alerts override screen savers.  
You can set backlighting to remain on when an  
external power source, such as the AC adapter, is  
used with the phone.  
Note: Power backlighting may not be available  
with the optional desktop charger or other  
accessories.  
1. Select Menu Settings Display →  
Screen Saver.  
2. Highlight a screen saver and press  
. The  
Tip: Use the power backlighting as a night light  
image displays.  
when traveling.  
3. Press  
to assign the screen saver.  
1. Select Menu Settings Accessories →  
4. Press  
to return to the home screen  
Pwr Backlighting.  
and wait 10 seconds to view the screen saver  
you chose.  
2. Select Always On to keep backlighting on.  
Note: The battery charges more slowly when  
Note: Downloaded screen savers are added to  
power backlighting is on.  
the end of the list.  
Changing the display contrast  
Selecting wallpaper  
1. Select Menu Settings Display →  
Wallpaper appears on the home screen.  
Contrast.  
1. Select Menu Settings Display →  
2. Press  
left or right to adjust the contrast  
Wallpaper.  
and select Save.  
38  
Customizing Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Highlight a wallpaper design from the  
Changing your lock code  
standard list or press  
to select  
The lock code is typically 0000 or the last 4 digits  
of your phone number.  
additional Options.  
Take Picture allows you to take a picture.  
Camera Pictures allows you to select a  
picture from your folder.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select New Lock Code. A message appears:  
Images allows you to select an image from  
your Image folders.  
“Change Code?”  
4. Press  
digit code.  
to select Yes and enter a new four-  
3. Follow the prompts to save your selection.  
4. Press to return to the home screen.  
5. Enter your new lock code again.  
Selecting a color theme  
Locking your phone  
You can select a color theme for the display  
background of your phone.  
When your phone is locked, you can call only  
emergency numbers or your service provider’s  
number. You can still receive incoming calls.  
1. Select Menu Settings Display →  
Color Themes.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Lock Phone.  
2. Scroll through the options to view the  
color themes and press  
to select one.  
Choosing a different time/date format  
1. Select Menu Settings Display →  
Time/Date Format.  
4. Highlight an option:  
Never does not lock the phone.  
On power up locks the phone every time  
you turn it on.  
2. Highlight an option and press  
.
Now locks the phone immediately.  
Creating a secure environment  
5. Press  
.
This section describes all the features involved in  
securing your phone and preventing access to  
personal information. All security features are  
shielded by a four-digit lock code.  
Unlocking the phone  
1. From the home screen, press  
to  
select Unlock.  
2. Enter your four-digit lock code.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Limit All calls, both incoming and  
outgoing.  
Designating emergency numbers  
The emergency numbers feature allows you to  
specify three personal phone numbers that can be  
called when the phone is locked.  
Erasing all contacts  
You can erase all entries from your  
Contacts directory.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Emergency Numbers.  
4. Select an Unassigned slot.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Erase Contacts.  
5. Enter the phone number, including the area  
4. Select Yes to erase all contacts. A message  
code. Do not enter 1 before the area code.  
appears: “Erase ALL Contacts?”  
6. Press  
Notes:  
to select Done.  
5. Press  
to select Yes to erase all contacts.  
To make a call to an emergency number from  
a locked phone, you must dial the number  
(including area code) exactly as it was stored  
in Emergency Numbers.  
Network settings  
Switching between phone lines  
Your phone can have two service accounts, or  
phone lines, associated with it. Each phone line  
has its own phone number. When you are using  
one line, you cannot receive calls from the other.  
It would be as if the phone were “off” for that  
number. Your voicemail, however, will still take  
messages. All contacts and settings are shared for  
both lines.  
Limiting calls  
You can limit the calls that can be made from your  
phone to emergency numbers, your contacts, and  
your service provider’s numbers.  
1. Select Menu Settings Security.  
2. Enter your four-digit lock code.  
3. Select Limit Calls.  
Note: You must first establish a second phone  
line with your service provider. Once established,  
a second phone number becomes available in the  
menu for selection:  
4. Choose an option and press  
:
No Limit limits no calls.  
Limit Outgoing calls only. Incoming calls  
1. Select Menu Settings Network →  
can still be received and answered.  
Set Phone Line.  
2. Select one of the two lines and press  
.
40  
Customizing Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Select Menu Settings Network →  
Data Settings  
Data/Fax Calls.  
Setting Com port speed  
4. Press  
to select an option:  
The Com Speed sets the data rate at which your  
phone connects to a laptop or PC, or at which it  
sends and receives over-the-air text messages.  
Voice only allows only voice calls.  
Fax, next call or Data, next call sets the  
phone to fax mode or data mode for the  
next incoming call or the next 10 minutes.  
Fax, until off or Data, until off forces the  
phone into fax mode or data mode until  
the phone is turned off.  
1. Select Menu Settings Accessories →  
Com Port Speed.  
2. Select the speed. The options are: 19.2 kbps,  
115.2 kbps (default), 230.4 kbps, and Other.  
Note: There may be a higher charge for  
making calls using high-speed data in areas  
where 1X service is available. Check with your  
service provider for details.  
Note: You cannot receive voice calls while the  
phone is in data/fax mode.  
Connecting to a TTY/TDD device  
You can connect the phone to a TTY device for the  
hearing impaired. Note: Enable TTY only when  
using the phone with a TTY device.  
Setting the phone to receive data  
or faxes  
Your phone may be able to receive certain data or  
faxes, depending on the system sending the  
information. You cannot receive voice calls while  
the phone is in data/fax mode.  
1. Connect the TTY device to the phone.  
2. Enter  
your keypad.  
3. Press to select the TTY option.  
from  
To receive data or faxes, you must connect the  
phone to a laptop or PC and switch the phone  
from voice mode to data/fax mode.  
4. Close the Information window by pressing  
to select OK.  
5. Highlight TTY On and press  
.
Note: To purchase a cable, call 800-349-4188  
(U.S.A. only), 858-882-1410, or visit  
1. Connect the phone to the laptop or PC.  
2. Set the Com speed.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Setting position location  
This setting allows you to share your location  
information with network services other than  
emergency services (For example: 911, 111, 999,  
and 000) in markets where service has  
been implemented.  
Note: This feature works only when your phone is  
in digital mode. You do not have the option of  
turning off the locator to emergency services.  
1. Select Menu Settings Network →  
Location.  
2. Select 911 Only or Location On.  
911 Only (default) shares your position  
information only with emergency services  
when you call your 3-digit emergency  
code (911, 000, 111, etc.).  
Location On shares your position  
information with your service  
provider’s network, in addition to  
emergency services.  
42  
Customizing Your Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
USING VOICE RECOGNITION  
Voice recognition allows you to make and  
answer calls by speaking commands into the  
phone’s microphone.  
3. Highlight the phone number and  
select Options.  
4. Select Add Voice Dial, Edit Voice Dial, or  
Erase Voice Dial.  
Note: You cannot use voice recognition to end a  
call; you must press  
when the flip is open.  
5. Follow the prompts.  
Setting up voice dialing  
To make or receive calls using voice dialing,  
Making a call using voice tags  
1. If you haven’t already done so, record a voice  
contacts must be saved with associated voice tags.  
tag for the person you wish to call.  
2. With the flip open, from the home screen,  
Creating a voice tag for a contact  
press  
. The phone responds:  
1. Press  
to select Contacts.  
“Say a name.”  
2. Highlight the contact and press  
.
3. Say the name of the person you want to call.  
3. Press  
down to highlight the number.  
4. If the name you said matches a contact in the  
Voice Dial List, the phone responds: “Calling  
(Name).” Remain silent to make the call, or  
say No to cancel.  
4. Press  
to select Options.  
5. Highlight Add Voice Dial and press  
.
6. Follow the voice prompts. You will need to say  
Note: If the phone finds multiple voice tags  
that sound like the name you said, you will be  
asked to verify which name you want to call.  
Say Yes when you hear the correct name. Say  
No when you hear an incorrect name.  
the name twice.  
Viewing entries with voice tags  
Select Menu Contacts Voice Dial List.  
A list of all contacts with assigned voice  
tags appears.  
5. When you are finished with the call,  
open the flip and press  
to end the call.  
Editing a voice tag  
1. Select Menu Contacts Voice Dial List.  
2. Highlight the contact to edit, and press  
.
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
Say “Verify” to cause phone to repeat the  
set of digits that you input.  
Erasing voice tags  
To erase all voice name dial recordings in  
your phone:  
Say “Cancel” to exit voice recognizer and  
return to the home screen.  
1. Menu Settings Voice Features →  
Speak a digit to enter the next digit. Once  
the phone repeats the digit, you can speak  
the next digit or pause to hear the prompt.  
Erase Voice Dial.  
2. Select Yes.  
Making a call using digit dialing  
When using digit dialing, you speak digits to dial a  
phone number.  
Using voice features with  
hands-free car kits  
You can use voice commands to make a phone  
call or to answer the phone only if your phone is  
connected to a professionally installed Kyocera  
hands-free car kit (sold separately).  
Note: You cannot speak a string of digits. You  
must speak one digit at a time and wait for  
the prompt.  
1. From the home screen, press  
. The phone  
Note: The following features apply only to  
installed hands-free car kits unless noted.  
responds: “Say a name or say Dial.”  
2. Say “Dial”. The phone responds:  
To shop for hands-free car kits, visit  
800-349-4188 (U.S.A. only) or 858-882-1410.  
“Speak a digit.”  
3. Speak the first digit of the phone number you  
want to call. Once the phone repeats the digit,  
you can speak the next digit.  
Waking up the phone  
If you pause, the phone will prompt you with  
the following five options. After the prompt,  
speak an option.  
If your phone is connected to a Kyocera installed  
hands-free car kit, you can use the voice  
command to activate the phone to make a  
phone call.  
Say “Clear” to erase the last digit entered.  
The phone responds: “Digit cleared.”  
To clear the entire phone number, say  
Clear” again. When the phone prompts  
you with “Clear entire phone number?”,  
say “Yes” to clear or “No” to cancel.  
To activate the Voice Wake-up setting:  
Select Menu Settings →  
Voice Features Voice Wake-Up →  
With accessory.  
Say “Call” to dial the number.  
44  
Using Voice Recognition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To wake up the phone:  
3. Select Menu Settings Silent Mode →  
Normal Sounds, then press  
.
1. Say “Wake Up” and listen for a tone.  
2. Say “Wake Up” again until you hear two tones.  
To answer a call:  
When you receive an incoming call, the phone  
responds: “Incoming call, answer?” or “Incoming  
roam call, answer?” If the caller is recognized as a  
contact entry in your phone, then the phone will  
say “Incoming call from (Name), answer?”  
If the phone does not recognize your  
“Wake up” command, see “Training voice  
recognition” on page 45.  
Answering the phone  
You can set your hands-free car kit to (1)  
answer automatically or (2) answer using a  
voice command.  
Say “Yes” or press any key except  
.
Ignoring an incoming call  
To ignore an incoming call, do one of the  
following:  
Answering automatically  
You can set your phone to answer automatically.  
Say “No” and press  
to silence the alert.  
Note: This setting also works with the portable  
hands-free car kit.  
Remain silent. The voice alert repeats twice  
and the phone rings once, then returns to the  
home screen.  
Select Menu Settings Accessories →  
Auto-Answer After 5 secs.  
Training voice recognition  
Answering using voice commands  
If your phone is having trouble recognizing your  
voice, you can train it with the commands Yes,  
No, and Wake up.  
If Auto-Answer is turned off, you can use a voice  
command to answer an incoming call using the  
installed hands-free car kit.  
1. Select Menu Settings Voice Features.  
2. Select Voice Training.  
Select Menu Settings Accessories →  
Auto-Answer Disabled.  
3. Read the message and press  
to select OK  
To activate the Voice Answer setting:  
and continue. Cancel returns you to the  
previous screen.  
1. Select Menu Settings →  
Voice Features Voice Answer.  
4. Select Train All or the item you want to train.  
2. Highlight Enabled and press  
.
5. Follow the prompts for each word until  
training is complete.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
9
USING THE CAMERA  
3. Highlight an option and press  
:
Tips before operating your  
camera  
Flash options are On, Off, or Automatic.  
Resolution options are 1280 x 1024 (best  
for printing), 640 x 480, 320 x 240 (best  
for sending to email), and 160 x 120.  
Low Light Mode brightens the picture for  
low light environments.  
You cannot activate the camera while  
on an active call or while browsing files in the  
media gallery.  
Once the camera is active, the home screen  
acts as the viewfinder.  
Self Timer options are Off (default) or 3,  
5, or 10 second pauses. When set, the  
camera beeps from 3 seconds down to the  
time the shutter snaps the picture  
automatically. Self Timer is not available  
when Multishot mode is activated.  
Multishot allows you to take up to six  
multiple pictures while the camera key is  
pressed and held. A tone will play each  
time a picture is taken. A second tone will  
play when the final picture is taken.  
Shutter Sound sets the sound used when  
the camera takes a picture.  
If you get a “Low memory” error, check your  
resolution and quality compression settings.  
See “Setting up the camera for photos” on  
this page.  
If there is no activity within 45 seconds after  
you turn your camera on, the camera quits  
and returns to the previous launch point.  
Menu settings and options can only be  
accessed when the camera is active.  
Accessing camera mode  
Press  
until you hear two beeps  
to activate camera mode or select  
Menu Camera.  
White Balance allows the camera to adjust  
for different lighting. Options are  
Automatic, Fluorescent, Incandescent,  
or Daylight.  
Setting up the camera for  
photos  
Color Tone sets the color tone of  
the picture.  
1. While in Camera mode, press  
to  
select Options.  
2. Press  
to select Settings.  
46  
Using the Camera  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quality sets the picture compression. The  
higher the compression, the better the  
detail of the picture (higher pixel rate).  
Options are Low, Medium, or High  
(default). When set to High, the picture  
file size is larger, using more memory.  
LED flashes a light to indicate a picture  
has been taken. Options are On (default)  
and Off.  
Brightness allows you to adjust the  
brightness of the image in the home  
screen LCD.  
Camera Pictures displays all pictures  
taken and stored.  
Last Picture displays the most recently  
taken picture.  
Frames allows you to add a frame or a  
stamp to your picture. A frame or stamp  
cannot be removed once it has been used  
in a picture.  
Viewfinder Display options are Fullscreen  
and Actual.  
Note: The picture resolution changes to  
160 x 120 while taking pictures with frames.  
The resolution returns to the original setting  
once Frames is disabled.  
Restoring camera menu settings  
The following settings revert to the default  
setting each time you enter and exit the  
camera application:  
Low Light Mode, Self Timer,  
MultiShot, Viewfinder.  
Camera mode indicators  
and icons  
The camera mode displays the following onscreen  
indicators and icons:  
The following settings remain at the setting  
you selected each time you enter and exit the  
camera application:  
Icon  
Description  
Flash, Resolution, Shutter Sound, White  
Balance, Quality, LED, and Save Location.  
Flash on  
Menu options for camera mode  
Camera mode  
Zoom level  
Multishot  
1. Press  
2. Select Options.  
3. Press up or down to scroll through the  
options on the vertical menu bar:  
to activate camera mode.  
Settings displays available camera settings  
you may set up prior to taking a picture.  
Self Timer  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
Camera key map  
Icon  
Description  
Top right corner  
numbers  
Number of snapshots  
remaining  
Flip open  
Key  
Camera  
Menu Screen  
Bottom left corner  
numbers  
Take picture  
Dismiss menu  
options  
Resolution setting  
Select Capture Select OK  
to take picture  
Taking a picture  
1. Select Menu Camera.  
2. Focus on the image using the phone’s display  
Select Options Close, dismisses  
menu  
Up  
Zoom in  
Scrolls menu options  
right  
as the viewfinder.  
Tip: If your camera setting is low resolution,  
press  
zoom out.  
up or down to zoom in or  
Down Zoom out  
Scrolls menu options  
left  
3. Take the picture using one of two methods:  
Press or  
4. Press to select Send or  
select Erase.  
Takes picture Select menu option  
.
to  
5. Press  
when finished taking pictures.  
48  
Using the Camera  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 USING MEDIA GALLERY  
The Media Gallery stores camera pictures,  
images, and sounds in the phone and displays  
those files on the phone’s screen.  
Assign picture as a Caller ID or  
as wallpaper.  
Modify options are Rotate, Resize,  
Brightness, Sharpness, Saturation, Hue,  
Auto Adjust, Color Tone. Only unlocked  
pictures can be modified.  
Zoom allows you to zoom in or out on  
the picture.  
Send to Online allows you to upload a  
photo or other content to a server. *Not  
available on all phones. Check with your  
service provider.  
Take Picture to snap another photo.  
Lock to prevent accidentally erasing  
the photo.  
Rename the photo.  
Details of the file.  
Accessing files  
1. Select Menu Media Gallery.  
2. Select an option:  
Camera Pictures displays thumbnails of  
the photos you have taken in  
chronological order.  
Images displays a list of categories that  
contain preloaded, downloaded, saved, or  
created files such as wallpaper, screen  
savers, or caller IDs.  
Sounds displays a list of categories that  
contain saved or downloaded sounds such  
as ringers and voice memos.  
Browsing images  
The images menu allows you to assign your files  
to various applications.  
Browsing pictures  
1. Select Menu Media Gallery →  
Camera Pictures.  
1. Select Menu Media Gallery Images.  
2. Highlight a picture and press  
to  
select View.  
2. Highlight an option and press  
:
3. Press  
multimedia messaging application or  
press to select Options:  
Erase the image.  
to select Send and launch the  
Saved Images displays available images.  
Wallpapers displays wallpaper selections.  
Screen Savers displays available  
screensavers.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
Caller IDs displays pictures and images  
saved and the text IDs you assigned them.  
Doodles saved from Doodler.  
Ringers contains ringers saved on  
your phone.  
Voice Memos contains voice memos you  
made to yourself.  
3. Highlight a display and press  
to select  
View.  
3. Press  
to select Options.  
4. Press  
to select Send and launch the  
4. Highlight an option and press  
multimedia messaging application.  
(options vary according to selection):  
- or -  
Press  
Play to review the sound.  
Record New allows you to record  
new sounds.  
to select Options (options vary  
according to selection):  
Send to Online allows you to upload a  
photo or other content to a server. *Not  
available on all phones. Check with your  
service provider.  
Set as Default to assign the image as a  
wallpaper or screen saver.  
Assign to assign the image to a contact.  
Erase the image (image must not  
be locked).  
Details gives you the file size of the image.  
Erase All erases all images stored (images  
must not be locked).  
Erase the sound.  
Lock to prevent accidentally erasing  
the sound.  
Rename allows you to rename the  
sound file.  
Details gives you the file size of the sound.  
Erase All erases all sounds stored.  
Send to Online allows you to upload a  
photo or other content to a server. *Not  
available on all phones. Check with your  
service provider.  
Assign to assign the image to a contact.  
5. Select Close or press  
when done.  
5. Select Close when done.  
Browsing sounds  
1. Select Menu Media Gallery Sounds.  
2. Highlight an option and press  
Saved Sounds contains sounds saved on  
your phone.  
:
50  
Using Media Gallery  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 USING TOOLS AND GAMES  
Naming a saved voice memo  
1. Select Menu Tools & Games →  
Voice Memo Recorded Memos.  
Voice Memo  
The Voice Memo tool allows you to record and  
play back audio memos.  
2. Highlight the memo and select Options.  
Recording a voice memo  
1. Select Menu Tools & Games →  
Voice Memo Record New.  
-or-  
3. Select Rename.  
4. Press and hold  
to clear the  
default name.  
5. Use the keypad to enter a name for the memo.  
Press and hold  
right.  
6. Select Save.  
2. Say your memo and press  
to select Stop.  
3. Select Save to save your memo.  
Erasing a saved voice memo  
1. Select Menu Tools & Games →  
Voice Memo Recorded Memos.  
Note: If an incoming call is received while you’re  
recording a memo, the memo is saved and the  
incoming call screen appears.  
2. Highlight the memo and select Options.  
3. Select Erase. The prompt “Erase file?”  
Playing or reviewing a voice memo  
1. Select Menu Tools & Games →  
Voice Memo Recorded Memos.  
appears.  
4. Select Yes or No.  
2. Highlight the voice memo to review and  
Scheduler  
The Scheduler allows you to schedule events and  
set reminder alerts.  
select Play.  
3. Press  
and press  
right and left to select a function  
to perform it:  
Play  
Creating an event  
1. Select Menu Tools & Games →  
Scheduler Add New Event.  
Stop  
Pause  
2. Enter a name for the event and press  
down. For help entering text, see page 15.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
3. Select Options and classify the type of event  
and press : Meeting, Phone Call,  
10. Press  
recurring event.  
Select an option and press  
Weekly, Monthly, or Annually.  
11. Select Save.  
to select whether or not this is a  
Birthday, Anniversary, Vacation, Medical,  
or Other.  
: No, Daily,  
4. Press  
to change the date of the event (the  
current date is the default date of the event).  
Editing, erasing, or sending an event  
1. Select Menu Tools & Games →  
Scheduler View Month.  
Press  
left or right to move between  
the month, day, and year fields.  
Press  
month, day, or year.  
Press  
up or down to change the  
2. Press  
up, down, left or right to highlight  
the day with the event to view, edit, or erase  
to save your changes.  
and press  
3. Press  
and press  
4. Press  
.
5. Press  
to set the time of the event.  
up or down to highlight the event  
.
Press  
left or right to move between  
the hour, minute, and AM/PM fields.  
to select Options.  
Press  
hour, minute, or AM/PM.  
Press to save your changes.  
up or down to change the  
5. Select Edit, Erase, or Send and press  
.
For more information about editing the  
event, see “Scheduler” on page 51.  
To erase the event, highlight Erase and  
6. Press  
to set the duration of the event.  
Press left or right to move between  
press  
. Press  
to confirm.  
the hour and minute fields.  
Press up or down to change the  
hour and minute.  
Press to save your changes.  
For more information about sending the  
event, see “Sending and Receiving Text  
Messages” on page 22.  
7. Press  
to set a reminder of the event.  
Select an option and press  
.
8. Press  
to set the reminder sound.  
Select an option and press  
.
9. Press  
to select a Silent Mode setting  
Select No or During Event and press  
.
52  
Using Tools and Games  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the QuickAlarm  
1. Select Menu Tools & Games →  
Alarm Clock.  
Alarm Clock  
You can set up to four alerts with your phone’s  
three alarm clocks and one quick alarm.  
2. Highlight QuickAlarm and select Set.  
Note: The alert occurs only if the phone is on.  
3. Select an option and press  
minutes (default), 30 minutes, or 60 minutes.  
A message appears telling you the  
QuickAlarm is On.  
: 5 minutes, 15  
Setting an alarm clock  
1. Select Menu Tools & Games →  
Alarm Clock.  
2. Highlight one of the alarms and select Set.  
4. When the alarm rings, select Off to turn off the  
alarm or Reset to set the QuickAlarm again.  
3. Use the phone keypad to enter numbers and  
to switch between AM and PM.  
Tip Calculator  
The Tip Calculator helps you calculate how much  
tip to include with a bill.  
Press  
hours, minutes, and AM/PM fields.  
Press up or down to change the  
hours, minutes, and AM/PM options.  
4. Press to set the time of the alarm.  
5. Select Options to set the alarm sound.  
6. Highlight an option and press  
7. Select Options to set the recurring time.  
8. Highlight an option and press  
9. Enter a note for the alarm and press  
10. Press to select Save and set the alarm(s).  
left or right to move between  
1. Select Menu Tools & Games →  
Tip Calculator.  
2. Enter the amount of your bill.  
3. Select Next.  
.
4. Select the amount you want to include as a tip  
(10%, 15%, 18%, 20%, Other) and press  
. Your total bill appears, including tip.  
.
.
5. To split the bill, press  
to select Split.  
6. Press to clear the default of 2 guests.  
11. When the alarm rings, select Off to turn off the  
alarm or Snooze to silence the alarm for  
10 minutes.  
7. Enter the number of guests and press  
select Next. The amount each guest pays is  
calculated.  
to  
Note: Opening the flip turns off the alarm.  
8. Select Done.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
Calculator  
Use the calculator for basic  
mathematical equations.  
Timer  
This timer counts down for a specified amount  
of time. It beeps when that amount of time  
has elapsed.  
1. Select Menu Tools & Games Calculator.  
2. Use the keypad to enter numbers.  
1. Select Menu Tools & Games Timer.  
2. Press  
to select Set.  
3. Use  
Left x (multiply) Up + (add)  
Right ÷ (divide) Down - (subtract)  
4. Press to calculate the result. Example:  
Enter 5, press  
then press  
to select mathematical operations:  
Press  
or right.  
to move the cursor left  
Press the phones numeric keypad to enter  
the hours, minutes, and seconds.  
left to select X, enter 2,  
to obtain the result of 10.  
3. Select Start to begin the countdown.  
Select Stop to pause the countdown.  
Select Reset to clear the timer.  
5. Press  
- or -  
to return to the home screen.  
4. Select Sound to set the alarm sound and  
press  
.
Press  
to clear the screen.  
5. Press  
or  
to silence the alarm.  
Options  
Adds displayed digit to the value  
stored in memory.  
Stopwatch  
1. Select Menu Tools & Games →  
M+  
MR  
MC  
Displays currently stored value on  
screen.  
Stopwatch.  
2. Select Start to begin counting.  
Select Stop to stop counting.  
Clears value currently stored in  
memory.  
Select Reset to clear the counter.  
54  
Using Tools and Games  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Games  
Race 21  
The games in this section may not be available  
on your phone. Check with your service provider  
for availability.  
This game is a timed variation of Black Jack. Each  
game comprises three 90-second rounds. To  
score points, add cards in each of the four  
columns, trying to reach but not exceed 21 in  
each column during the course of the game.  
If you receive an incoming call alert while you are  
playing a game, the game is paused and exited.  
You can return to play once the call alert ends.  
Games do not remain paused if the phone is  
turned off or loses power.  
1. Select Menu Tools & Games Race 21.  
2. Press  
to select Yes at the prompt, “Turn  
off backlight to conserve battery?”  
3. Select New Game. The first card to be placed  
is shown at the top left of the screen. Press a  
key to add a card to the row as follows:  
Brick Attack  
The goal of this game is to eliminate bricks  
arranged in levels. You send a moving ball  
upward using a paddle at the bottom of  
the screen.  
Add cards to the first row  
Add cards to the second row  
Add cards to the third row  
1. Select Menu Tools & Games →  
Brick Attack.  
Add cards to the fourth row  
2. Press  
to select Yes at the prompt, “Turn  
off backlight to conserve battery?”  
Shortcut: Press  
left or right to choose  
arrows at the bottom of the screen then press  
to add cards to corresponding rows.  
3. Press  
to select New.  
To pause the game, press  
press to Resume.  
To move the paddle, press  
or right.  
To exit the game, highlight Exit and  
press  
, then  
Note: Each time you place a card, a new card  
appears for placement.  
left  
4. Continue placing cards until you are satisfied  
with your selections.  
.
You can pause or end the game at any time  
by pressing  
.
You lose points each time you exceed 21  
in a column.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
To move the cursor away from the drawing:  
Select Skip to skip one card per round.  
5. Press to select to get your score  
1. Select Options Colors and Tools.  
and advance to the next round.  
2. Select  
then Done.  
6. Select an option and press  
to select it.  
3. Press a number key to move the cursor.  
To erase part of a drawing:  
New Game initiates game play. To pause  
the game, press . From here you can  
1. Select Options Colors and Tools.  
choose Resume, New or Quit.  
Resume Game returns you to the game  
you were last playing.  
Scoreboard provides you with the top  
five scores.  
2. Select  
then Done.  
3. Press a number key to move the eraser.  
To Navigate: Use the following keys to doodle.  
To:  
Use:  
7. Press  
to end all games.  
Select Options  
Doodler  
You can create and save graphics on your phone.  
Clear screen  
Shortcut to Colors & Tools  
1. Select Menu Tools & Games Doodler.  
2. Select New Doodle to open the drawing screen  
The cursor is located in the middle of  
the screen.  
Draw, erase, or move cursor/  
shape UP  
up  
Draw, erase, or move cursor/  
shape DOWN  
down  
left  
3. Select Options to choose the Colors, Tools,  
Lines, or Shape you want to use.  
Draw, erase, or move cursor/  
shape LEFT  
4. Use keys 1–9 or to move  
the cursor around the  
screen as indicated.  
Draw, erase, or move cursor/  
shape RIGHT  
right  
5. When finished, select  
Options Save. The  
image is saved to  
Return cursor to center  
Media Gallery.  
Previous screen  
56  
Using Tools and Games  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Saving a doodle  
It is a good idea to save the doodle while you are  
working on it. If you receive a call while creating  
an unsaved doodle, it will be lost.  
Select Options Save. The image will be  
saved in Menu Media Gallery →  
Images Doodles.  
Resuming a doodle  
To return to another saved doodle:  
Select Menu Tools & Games →  
Doodler Resume Doodle.  
- or -  
Select MenuMedia Gallery →  
Images Doodles.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
12 CONNECTING TO THE INTERNET  
An underline and an arrow indicate that  
Using the Web Browser  
there is more text. Press  
view more text. Press  
the previous screen.  
down to  
to return to  
You can use your phone to browse the Internet if  
you have obtained phone Internet services from  
your service provider and if over-the-air Internet  
access is available in your area.  
To choose a site, highlight it and press  
to select Go.  
Note: You cannot receive incoming calls while  
you are using Web Browser.  
4. When you have finished using the Internet,  
press to exit the Web Browser.  
Launching the Web Browser  
Using the Web menu options  
1. Select Menu Web Browser.  
The following options may appear on your screen:  
A message about airtime fees appears every  
Home returns you to the main Web Browser  
time you start the browser.  
window, or home page.  
For more information about how airtime is  
charged, contact your service provider.  
Mark Site saves the current location as a  
bookmark for easy access.  
2. Press  
to continue.  
Bookmarks displays a list of your saved  
Web sites.  
If this is the first time you have connected  
to the Internet, a message informs you  
that security is not yet enabled for your  
Web Browser.  
Setup gives you options for changing how  
information is displayed.  
Show URL displays the entire URL.  
About Openwave displays information  
about your Web Browser version.  
Encryption should not be used unless you  
are instructed to do so by your service  
provider.  
UP.Link selects a different browser server.  
You can use this option if you have more  
than one Web Browser account.  
3. Press  
to select Yes to enable security.  
When you are connected, a browser home  
page appears. It has a list of bookmarks and  
some Web menu options at the bottom of  
the screen.  
A
appears in a secure session.  
58  
Connecting to the Internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restart restarts the Web Browser.  
Searching for a Web site  
How you search for a Web site depends on  
your service provider. For more information,  
contact your service provider.  
Going to a bookmarked site  
1. Select Menu Web Browser. If you see a  
message prompt, press  
to continue.  
2. From your Web home page, select  
Bookmarks. A list of bookmarks appears.  
3. Enter the number corresponding to the  
bookmark you want and press  
.
Checking Net alerts  
Alerts received from a Web site are sent to your  
Browser Alerts inbox.  
1. Select Menu Messages Browser Alerts.  
This action launches the browser inbox.  
2. Press  
to accept browser fees.  
3. Select an alert and follow the prompts.  
Setting a Web Prompt  
Allows you to set a prompt to confirm start or exit  
of the internet browser.  
Select Menu Settings Convenience →  
Web Prompt.  
Select an option and press  
.
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
13 GETTING HELP  
India:  
Toll free#: 1-600-121214  
Toll#: 0124-284-5000  
Customer support  
Your service provider’s customer support  
Mexico:  
001-866-650-5103  
department may be accessible directly from your  
phone when you dial a number, such as *611  
(check with your service provider). They can  
answer questions about your phone, phone bill,  
call coverage area, and specific features available  
to you, such as call forwarding or voicemail.  
New Zealand: 0-800-990-100  
Panama:  
Peru:  
001-800-201-1984  
0-800-51-934  
Puerto Rico:  
Venezuela:  
1-866-664-6443  
0-800-100-2640  
For questions about the phone features, refer to  
the materials provided with your phone, or visit  
Before requesting support, please try to  
reproduce and isolate the problem. When you  
contact the Customer Care Center, be ready to  
provide the following information:  
For additional questions, you may contact the  
Kyocera Wireless Corp. Customer Care Center in  
any of the following ways:  
The name of your service provider.  
The actual error message or problem you  
are experiencing.  
The steps you took to reproduce the problem.  
The phone’s electronic serial number (ESN).  
Phone: 1-800-349-4478 (U.S. and Canada)  
or 1-858-882-1401.  
To locate the ESN select Menu →  
Phone Info Build Info and scroll down  
to ESN: for the 11-digit number.  
Customer support phone numbers are also  
available in the following countries:  
Argentina:  
Australia:  
Brazil:  
0-800-666-0052  
1-800-507-000  
0-800-55-2362  
800-43-1212  
Qualified service  
If the problem with your phone persists, return  
the phone with all accessories and packaging to  
the dealer for qualified service.  
Chile:  
Colombia:  
01-800-700-1546  
60  
Getting Help  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Phone accessories  
To shop for K312 phone accessories, visit  
call us at 800-349-4188 (U.S.A. only) or  
858-882-1410.  
Become a product evaluator  
To participate in the testing and evaluation of  
Kyocera Wireless Corp. products, including  
cellular or PCS phones,  
visit beta.kyocera-wireless.com.  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
61  
INDEX  
Numerics  
1-Touch dialing, 11  
H
custom menu  
creating, 36  
hands-free car kit  
answering using voice, 45  
A
D
purchasing, 61  
hands-free headset  
jack, 4  
purchasing, 61  
hard pause, 18  
Alarm Clock, 7  
alarm clock, 53  
alerts  
for messages, 36  
for missed calls, 10  
analog mode, 7  
auto-hyphenation, 38  
data/fax setup, 13, 41  
digital mode, 7  
display contrast, 38  
Doodler, 56  
E
I
emergency  
icons, 7  
calls, 12  
contacts, 19  
messages, 26  
InBox, 26  
B
emergency mode, 12  
exit emergency mode, 12  
position location, 7, 42  
erasing  
banner, 37  
battery, 1  
blocking outgoing calls, 40  
Brick Attack, 55  
L
language, 37  
lights  
contact entries, 20, 40  
phone numbers, 20  
text messages, 27  
C
lights-only mode, 7, 34  
calculator, 54  
call counters, 12  
callback number, 23  
calls  
limiting calls out, 40  
lock code, 39  
locking  
F
fast find, 21  
fax mode, 41  
finding contact information, 21  
frequent contacts, 21  
phone, 39  
answering, 8  
M
missed, 10  
memory  
saving, 27  
menu view, 37  
redialing, 9  
G
games  
camera, 47  
menu options, 47  
sending a picture, 29  
setting up, 46  
taking a picture, 48  
color themes, 39  
Com Port speed, 41  
contacts directory, 18  
contrast, 38  
Brick Attack, 55  
Doodler, 56  
Race 21, 55  
N
number mode, 15  
O
OutBox, 25  
countdown timer, 54  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P
stopwatch, 54  
phone numbers  
erasing, 20  
symbol mode, 16  
T
verifying your own, 6  
technical support, 60  
text entry, 15  
quick reference, 17  
text messages, 22  
time format, 39  
timer, 54  
timing calls, 12  
tip calculator, 53  
TTY/TDD, 41  
phone, unlocking, 39  
position location, 7, 42  
power save mode, 8  
Q
QuickAlarm, 53  
QuickText, 23, 28  
R
Race 21, 55  
recent call icons, 10  
resetting the phone, iv  
ringers  
U
unlocking the phone, 39  
V
choosing types, 34  
for contacts, 18  
for roaming calls, 14  
silencing, 6  
vCard, 20  
vibrate, 7, 34  
Voice Answer, 45  
voice dialing, 43  
voice memo  
erasing, 51  
naming, 51  
recording, 51  
voicemail, 12  
setting up, 6  
volume  
volume, 35  
roaming, 7  
alerts, 13  
controlling, 13  
ringer, 14  
S
scheduler, 51  
screen contrast, 38  
screen icons, 7, 15, 25, 26, 34  
screen savers, 38  
secret contacts, 11, 20  
security, 39  
sent messages, 25  
silent mode, 7, 34  
smart sound, 35  
smiley mode, 16  
speed dialing, 11  
earpiece, 9, 35  
key beep, 36  
ringer, 35  
W
wallpaper, 38  
Web Browser, 58  
User Guide for the Kyocera K312 Phone  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Krell Industries Stereo Amplifier KAV 250a User Manual
KTM Motorcycle 640 DUKE II User Manual
Learning Resources Baby Toy LER 6916 User Manual
Lennox Hearth Indoor Fireplace ULC S610 User Manual
LG Electronics Refrigerator LFXS30766D User Manual
Life Fitness Elliptical Trainer 95XEZ 0XXX 01 User Manual
Life Fitness Home Gym Club Series User Manual
Maserati Guitar H3600 User Manual
Melissa Toaster 243 021 User Manual
Mellerware Iron 23455 User Manual