Domino S1310
user guide
Download from Www.Somanuals.com. All Manuals Search And Download.
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to
account for any variations in measurements.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.*
Bluetooth® Certification
For information about S1310 Bluetooth Certification, visit the
Bluetooth Qualification Program Web site at
Tests for SAR are conducted using standard operating positions
specified by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
.
Caution
Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be
well below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the warranty and user’s authority to operate the
equipment.
Optimize your Phone’s Performance
Use the instructions in this guide to learn how to optimize the
performance and life of your phone and battery.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model.
Air Bags
If you have an air bag, DO NOT place installed or portable
phone equipment or other objects over the air bag or in the air
bag deployment area. If equipment is not properly installed, you
and your passengers risk serious injury.
Body-worn measurements differ among phone models,
depending upon availability of accessories and FCC
requirements. While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
Medical devices
Pacemakers—Warning to pacemaker wearers: Wireless
phones, when in the ‘on’ position, have been shown to interfere
with pacemakers. The phone should be kept at least six (6)
inches away from the pacemaker to reduce risk.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
the FCC ID: OVF-K33BIC06.
The Health Industry Manufacturers Association and the wireless
technology research community recommend that you follow
these guidelines to minimize the potential for interference.
•
Always keep the phone at least six inches (15 centimeters)
away from your pacemaker when the phone is turned on.
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
If you have any reason to suspect that interference is taking
place, turn off your phone immediately.
Additional information on SAR can be found on the Cellular
Telecommunications and Internet Association (CTIA) web-site at
www.ctia.org
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
3
Hearing aids—Some digital wireless phones may interfere with
hearing aids. In the event of such interference, you may want to
call the customer service line to discuss alternatives.
They include:
•
•
•
•
fueling areas such as gas stations
below deck on boats
Other medical devices—If you use any other personal medical
device, consult the manufacturer of the device to determine if it
is adequately shielded from external RF energy. Your physician
may be able to help you obtain this information.
transfer or storage facilities for fuel or chemicals
vehicles using liquefied petroleum gas, such as propane or
butane
•
•
areas where the air contains chemicals or particles such as
grain, dust, or metal powders
In health care facilities—Turn your phone off in health care
facilities when instructed. Hospitals and health care facilities
may be using equipment that is sensitive to external RF energy.
any other area where you would normally be advised to turn
off your vehicle engine
Potentially unsafe areas
Use with care
Posted facilities—Turn your phone off in any facility when
posted notices require you to do so.
Use only in normal position (to ear). Avoid dropping, hitting,
bending, or sitting on the phone.
Aircraft—FCC regulations prohibit using your phone on a plane
that is in the air. Turn your phone off or switch it to Airplane
Mode before boarding aircraft.
Avoid magnetic environments
Keep the phone away from magnets which can cause improper
functioning of the phone.
Vehicles—RF signals may affect improperly installed or
inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Keep your phone dry
Keep the phone dry. Damage can result if the phone gets wet.
Water damage is not covered under warranty.
Blasting areas—Turn off your phone where blasting is in
progress. Observe restrictions, and follow any regulations or
rules.
Resetting the phone
If the screen seems frozen and the keypad does not respond to
keypresses, reset the phone by completing the following steps:
Potentially explosive atmospheres—Turn off your phone
when you are in any area with a potentially explosive
atmosphere. Obey all signs and instructions. Sparks in such
areas could cause an explosion or fire, resulting in bodily injury
or death. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
1. Remove the battery cover.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for
service.
Accessories
Use only Kyocera-approved accessories with Kyocera phones.
Use of any unauthorized accessories may be dangerous and will
void the phone warranty if said accessories cause damage or a
defect to the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
may not be able to use a rated phone successfully. Trying out
the phone with your hearing device is the best way to evaluate it
for your personal needs.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on,
it receives and sends out RF energy. Your service provider’s
network controls the power of the RF signal. This power level
can range from 0.006 to 0.6 watts.
M-Ratings—Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices
than phones that are not labeled. M4 is the better/higher of the
two ratings.
In August 1996, the U.S. Federal Communications Commission
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. These guidelines are consistent with
the safety standards previously set by both U.S. and
T-Ratings—Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
international standards bodies in the following reports:
•
•
ANSI C95.1 (American National Standards Institute, 1992)
NCRP Report 86 (National Council on Radiation Protection
and Measurements, 1986)
Hearing devices may also be measured for immunity to this type
of interference. Your hearing device manufacturer or hearing
health professional may help you choose the proper rating for
your mobile phone. The more immune your hearing aid is, the
less likely you are to experience interference noise from mobile
phones.
•
ICNIRP (International Commission on Non-Ionizing
Radiation Protection, 1996)
Your phone complies with the standards set by these reports
and the FCC guidelines.
E911 mandates
For more information about hearing aid compatibility, visit the
FCC’s Consumer & Governmental Affairs Bureau Web site at
Where service is available, this phone complies with the Phase I
and Phase II E911 Mandates issued by the FCC.
.
Hearing Aid Compatibility (HAC) with Mobile
Phones
Kyocera Communications Inc.
Some mobile phones and hearing devices (hearing aids and
cochlear implants), when used together, result in buzzing,
humming, or whining noises detected by the user.
To purchase accessories, visit
kyocera.superiorcommunications.com
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference they generate.
The wireless telephone industry has developed ratings for some
of their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not
all phones have been rated.
Phones that are rated have the rating on their box or a label on
the box. The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of Contents
Recent Calls . . . . . . . . . . . . . . . . . . . . . . 20
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 23
6
7
Images . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Tools & Games Menu . . . . . . . . . . . . . . . .32
Voice Memo. . . . . . . . . . . . . . . . . . . . . . . .33
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . .33
Messaging Menu . . . . . . . . . . . . . . . . . . . .38
Manage Browser Alerts . . . . . . . . . . . . . . .44
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . .49
Convenience. . . . . . . . . . . . . . . . . . . . . . . .50
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
4
8
5
9
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
7
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Download from Www.Somanuals.com. All Manuals Search And Download.
8
1
Get Started
Charge the Battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
Phone Battery
Install the Battery
To install the battery:
1. Hold the phone face
down.
1. Connect the AC
adapter to the
2. Find the notch directly
below the back cover.
It is square. Using your
thumbnail, pry the
cover up from the
bottom to remove.
3. Place the battery in the
battery casing with the
metal contacts facing
toward the top of the
phone. The metal
microUSB jack on the
side of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the
upper-right corner of the screen tells you
whether the phone is:
–
–
–
Charging (the icon is animated)
Partially charged
Fully charged
You can safely recharge the battery at any time,
even if it has a partial charge.
Note: Before removing the battery, make sure
the phone is powered off.
contacts of the battery
must make contact
with the metal contacts of the battery
casing.
4. Replace the battery
cover by sliding the
notches into the
openings on the top of
the battery casing.
5. Snap the cover into
place.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
9
•
•
Replace the battery only with another
qualified battery. Use of an unqualified
battery may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a replacement
battery is compatible, contact customer
support.
Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
Battery Safety Guidelines
•
•
Do not disassemble or open the battery.
Do not crush, bend, deform, puncture, or
shred the battery.
•
•
Do not attempt to insert foreign objects into
the battery.
Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
•
•
Supervise all battery usage by children.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
•
Always keep the battery between 15 °C and
25 °C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a
cooking surface, iron, or radiator.
Never use any damaged battery.
Only use the battery for its intended phone.
Only use the battery with a qualified
charger. Use of an unqualified battery
charger may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a charger is
qualified, contact customer support.
Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
•
•
•
•
Improper battery use may result in a fire,
explosion, or other hazard.
Common Causes of Battery Drain
•
•
•
Playing games or using the Web.
Keeping backlighting on.
Operating when far away from a base
station or cell site.
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted
alerts.
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Battery
10
Phone Overview
Get to Know Your Phone
The phone is shown here in the open position.
1. Home screen.
2. Volume key raises or lowers ringer volume.
3. Left softkey selects items that appear on the lower left of
the display. At the home screen, you can select Menu
.
4. Speakerphone key activates the speakerphone and answers
incoming calls.
5. Navigation key scrolls through lists and text entry fields
and accesses the following shortcuts from the home screen.
–
–
–
–
Scroll left to launch Browser.
Scroll right to go to Tools & Games > Voice Memo
.
Scroll up to create a custom menu shortcut.
Scroll down to go to Recent Calls > All
.
6. Send key starts or answers a call. Press once to display the
All Calls list, and two times to redial the last number dialed.
7. Keypad for entering numbers, letters, or symbols.
8. * Shift key changes the text mode in text entry. Press and
hold to activate keyguard.
9. Jack for a hands-free headset (sold separately).
10. Jack for AC adapter (included) and microUSB cable (sold
separately).
11. Right softkey selects items that appear on the lower right of
the display. At the home screen, you can select Contacts
.
12. OK key selects a menu item or option. At the home screen, you go to the main menu when you
press the OK key.
13. Back key erases characters in text entry and returns you to the previous screen when
navigating through menus.
14. End key turns the phone on and off, ends a call or browser session, and returns you to the
home screen.
15. # Space key enters a space during text entry. Press and hold to activate or deactivate silent
mode.
16. 0 Next key cycles through word choices during text entry.
Warning: Inserting an accessory into the incorrect jack will damage the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
11
Screen Icons
These icons may appear on your phone’s screen.
Content is DRM protected.
The phone is operating in IS2000 (1X)
digital mode.
Position location is set to emergency
services only.
The phone is in airplane mode.
The alarm clock is set.
Position location is set to your service
provider and to emergency services.
The phone is set to auto answer.
The phone is in High Speed Data mode.
A call is in progress.
The battery is fully charged. The more black
bars, the greater the charge.
The phone is set to light up instead of ring.
New message.
The phone is transferring data with
Bluetooth.
A headset or other hands free device is in
operation.
New text message.
New voice and text message.
New voice message.
A headset or other hands free device is
transferring data.
Bluetooth wireless technology is disabled
(Off).
The phone is not receiving a signal. You
cannot make or receive calls.
Bluetooth wireless technology is enabled
(On).
The phone is roaming outside of its home
service area.
The battery will not charge.
The phone is in privacy mode or is accessing
a secure Web site.
Data service is available and active on your
phone. Check with your service provider for
availability.
The phone is receiving a signal. You can
make and receive calls. More bars indicate a
stronger signal.
Data service is available, but the phone is
dormant.
The speaker phone is turned on.
A T-coil hearing aid is in operation.
A traffic channel is active.
(blinking) The phone is receiving high-speed
data.
(blinking) The phone is sending high-speed
data.
The phone is in TTY device mode.
The phone is operating in IS95 digital mode.
The phone is set to vibrate or to vibrate and
then ring.
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Overview
12
Main Menu
Press the OK key or select Menu when the phone is in idle state to access the main menu.
Idle State >
Menu
Level 1 >
Level 2
Recent Calls
Access these options: All Incoming, Outgoing, Missed,
Erase Call List
,
,
Call Timers, and Kilobyte Counter
.
Contacts
Access these options: View All
,
Add New Groups Speed
,
,
Dial List
,
Erase Contacts, and Contacts Count
Access these options: Images Sounds, and Delete All
Access these options: Brick Attack Voice Memo
.
Media Gallery
Tools & Games
,
.
,
,
Scheduler Alarm Clock Tip Calculator Calculator
,
,
,
,
Timer, and Stopwatch
.
Messaging
Settings
Access these options: New Text Msg
Browser Alerts Sent Msgs Outbox
Msg Settings Message Groups Erase Msgs and Message
Count
,
Voicemail
,
Inbox
,
,
,
,
Saved Msgs
,
Drafts,
,
,
.
Access these options: Bluetooth
,
Convenience
,
Display,
Sounds Accessories Network, and Security.
,
,
Browser
Browse the web.
Download an application.
Access these options: Build Info and Icon Keys
Downloads
Phone Info
.
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
13
Guide Conventions
In this guide, the following conventions are
used when describing phone features.
Select means to press the Left softkey, Right
softkey or OK key to select an item seen on the
display. For example, “Select Menu” tells you
to physically press the left softkey to choose
Menu from the display.
Press means to press a phone key. For
example, “Press the Send key to make a phone
call” tells you to physically press the Send key
on your phone.
Scroll means to use the Navigation key to
move through a list on the display. For
example, “Scroll through your contacts list to
choose a contact” means to physically press the
Navigation key up or down to scroll through
the list on the display.
>
(greater than symbol) tells you to select an
option from a menu or list. For example,
Menu Settings” means to:
“
>
1. Press the left softkey to select Menu
.
2. Scroll to the Settings option.
3. Press the OK key to select Settings
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide Conventions
14
2
Call Features
This section describes the basic features related
to calls.
Redial a Number
1. Press the Send key to open your call
history.
Power Phone Up
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called,
received or missed, press the Send key twice.
•
To turn your phone on, press the End key
and wait until the phone display lights up.
To turn your phone off, press and hold the
End key until the phone plays a short
musical sound and turns off.
•
Answer Phone Calls
When a call comes in, the phone rings,
vibrates, or lights up. The phone number of the
caller also appears if it is not restricted. If the
number is stored in your contacts list, the
contact’s name appears. There are several ways
you can answer a phone call.
Make Phone Calls
Make sure you are in an area where a signal
can be received. Look for the signal strength
icon on the home screen. The more bars, the
stronger the signal. If there are no bars, move
to where the signal strength is better.
When the phone has been idle for a time, it
cycles into power save mode. Press any key to
return to normal operating mode.
Answer Using Earpiece
Press the Send key.
Answer Using Speakerphone
Press the Speakerphone key.
There are several ways you can make a phone
call.
End Phone Calls
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Press the End key.
Call Using a Contact
1. From View All, highlight a contact.
2. Press the Send key.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
15
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
location.
Volume Control
Adjust Volume during a Call
Press the Volume key up or down to adjust the
earpiece volume during a call.
2. Press the Send key.
Emergency Services
Call Emergency Services
Use the Speakerphone
Your phone has a built-in speakerphone.
•
To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you
back, if necessary. To make or receive regular
calls after dialing the code, you must exit this
mode.
•
To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key
during an incoming call, you will answer the
call.
To dial an emergency code:
1. Enter the 3-digit emergency code.
2. Press the Send key.
Note: Regardless of the 3-digit emergency
code (911, 111, 999, 000, etc.), your phone
operates as described above.
Silence an Incoming Call
•
•
To silence the phone without answering the
call, press the Back key or press the
Volume key up or down.
To silence the phone and answer the call,
press the Back key or press the Volume
key up or down and then press the Send
key.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit
.
Use Speed Dialing
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Set Location Information” on
page 57.
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
location to it. See “Assign Speed Dials to
Contacts” on page 26.
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Control
16
3
Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Enter Letters with Number Keypad
From the text entry field, select Options >
Normal Alpha to enter letters. You can enter
text in the following ways:
Text Entry Modes
•
To enter a letter, press a key once for the
first letter, twice of the second letter, and so
on. If your phone is set to Spanish,
accented letters are available. Wait for the
cursor to move right and enter the next
character. Press the # Space to enter a
space.
The text entry screen has the following
features:
1. Characters remaining
that you can type.
Allowed message
length can vary
depending on your
•
•
To change case mode for a single letter,
press that key until you see the letter case
you want. To change the case mode, press
the * Shift key.
To enter a number, press and hold a number
key until the number appears on the screen.
service.
2. Text entry fields.
3. Current capitalization setting.
4. Current text entry mode.
Note: The entry mode will default depending
on the task you are doing. For example, when
entering a phone number, you are in Numbers
Only mode. When entering a name for a
contact, you are in Normal Alpha mode.
The
icon indicates you are in Normal
Alpha input mode. Press and hold the * Shift
key to switch input modes.
Enter Numbers with Number Keypad
From the text entry field, select Options >
Numbers Only to enter a number when you
press a key once.
The
icon indicates you are in Numbers
Only input mode. Press and hold the * Shift
key to switch input modes.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
17
Rapid Entry with Number Keypad
From the text entry field, select Options >
Rapid Entry to check words you are trying to
spell against a dictionary of common words.
You can enter text in the following ways:
•
To enter words, press a key once. For
example, to enter the word “Glow” press
the 4 > 5 > 6 keys. If the word doesn’t
match what you want, press 0 Next key to
look at other word matches. When you see
the word you want, scroll right.
•
•
To change case mode, press the * Shift key.
To enter a number, press and hold a number
key until the number appears on the screen.
The
icon indicates you are in Rapid Entry
input mode. Press and hold the * Shift input
key to switch input modes.
Enter Symbols with Number Keypad
While entering text in Normal Alpha mode,
you can enter symbols by pressing the key
1
until you see the symbol you want. Using this
method, you have access to the following
symbols:
. @ ? ! - , & : ‘
To access the full set of symbols:
1. From the text entry field, select Options
Add Symbols
>
.
2. Scroll up or down to view the list of
symbols.
3. Press the number key corresponding to the
symbols to enter it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Entry Modes
18
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use Normal Alpha mode and press a key until you see
the letter your want.
Enter a number
Enter a symbol
Use Numbers Only mode and press a key.
Use Normal Alpha mode and press the key until you
1
see the symbol you want.
Enter a space
Press the # Space key.
Press the Back key.
Erase a character
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change input mode
Change case mode
Press and hold the Back key.
Scroll left or right.
Scroll up or down.
Press and hold the * Shift key.
Press the * Shift key.
Capitalize any letter
In Normal Alpha mode, press the * Shift key. Choose
uppercase.
Lowercase any letter
In Normal Alpha mode, press the * Shift key. Choose
lowercase.
Initial caps
In Normal Alpha mode, press the * Shift key. Choose
sentence case.
Select options on the bottom of the screen
Press the appropriate left or right softkey.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
19
4
Recent Calls
Recent Calls Menu
Select Recent Calls from the main menu to access the following functions:
Level 1 >
Level 2 >
All
Level 3
Recent Calls
See a list of all voice calls.
Incoming
Outgoing
Missed
See a list of all voice calls you have received.
See a list of all voice calls you have made.
See a list of voice calls you have missed.
Erase Call List
Call Timers
Access these options: All
,
Incoming
,
Outgoing, and Missed
.
Access these options: All
,
Recent Home
,
,
Roam Incoming,
,
and Outgoing
.
Kilobyte Counter
See how much data you have sent and received.
Return a Received Call
Work with Call Lists
Return Any Call
1. From All, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls made and received.
1. From Incoming, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls received.
Return an Outgoing Call
1. From Outgoing, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls you have made.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recent Calls Menu
20
Send Text Message from Call List
1. At a call list, highlight a contact.
Return a Missed Call
1. From Missed, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls you received, but did
not answer.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
.
Erase Call List Records
Erase a Single Record
1. At a call list, highlight a contact.
2. Select Options > Erase Record > Yes
Manage a Missed Call Alert
When you have missed a call, “Missed Call”
appears on your screen. You can do one of the
following:
.
•
•
To clear the screen, select OK.
To view the call details, select Calls and
press the OK key.
Erase a Call List
From Erase Call List, select a call list to erase
records from. For example to erase all records
from the incoming call list, select Incoming >
•
To return the call, select Calls and press the
Send key.
Yes
.
Call List Options
Erase All Call Lists
From Erase Call List, select All > Yes to erase
all records from all call lists.
Save Number from Call List
1. At a call list, highlight a number.
2. Select Options > Save
.
3. Select Save New Contact to create a new
contact or Add to Existing to add a number
to an existing contact.
Work with Call Timers
View All Calls Timer
Select All to view the number of calls and the
total call time. Select Done when finished.
This timer tracks all calls made and received
for life of the phone and cannot be reset.
View Contact from Call List
1. At a call list, highlight a contact.
2. Select Options > View to see the contact
details screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
21
View Recent Calls Timer
View Outgoing Calls Timer
Select Recent to view the number of calls and
the total call time. Select Done when finished.
This timer tracks all calls made and received
since you last reset the timer. To reset this
Select Outgoing to view the number of calls
and the total call time. Select Done when
finished.
This timer tracks all calls made since you last
reset the timer. To reset this timer to zero,
timer to zero, select Reset > Yes
.
select Reset > Yes
.
View Home Calls Timer
Select Home to view the number of calls and
the total call time. Select Done when finished.
This timer tracks all calls made and received in
your home network since you last reset the
timer. To reset this timer to zero, select Reset >
View Data Counter
Select Kilobyte Counter to view the amount
of kilobytes sent during data calls. Select Done
when finished.
This timer tracks kilobytes sent during data
calls made, data calls received, and for the life
of the phone. To reset the data counter to zero,
Yes
.
View Roam Calls Timer
select Options > Reset > Yes
.
Select Roam to view the number of calls and
the total call time. Select Done when finished.
This timer tracks all roaming calls made and
received since you last reset the timer. To reset
this timer to zero, select Reset > Yes
.
Your phone can alert you with a short beep ten
seconds before each minute passes during a
call. For more information, see “Enable Minute
Alert” on page 52.
View Incoming Calls Timer
Select Incoming to view the number of calls
and the total call time. Select Done when
finished.
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
select Reset > Yes
.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
View Data Counter
5
Contacts
Use Contacts to store information about a person or company.
Contacts Menu
Select Contacts from the main menu to access the following functions:
Level 1 >
Contacts
Level 2 >
Level 3
View All
Access your existing contacts list.
Add a new entry to your contacts list.
View your groups of contacts.
View your contacts assigned with speed dials.
Add New
Groups
Speed Dial List
Erase Contacts
Access options: Contacts Only
,
Groups Only, and Erase
All.
Contacts Count
Check how much contact space you have used.
View Contact Details
Access Contacts
Access Contacts List
1. From View All, enter the first letter of your
desired contact and scroll to highlight it.
2. Do one of the following:
1. From View All, select a contact.
2. At the contact details screen, highlight a
number, address or note.
3. Select the detail you want to view. For
example, to view a phone number, select
–
–
Press the Send key to call the contact.
Press the OK key to view the contact’s
details.
Options > View Number
.
Use Frequent List
With Frequent List enabled, you can view 15
of your most frequently called contacts. See
“Enable Frequent List” on page 52.
–
–
Select New to create a new contact.
Select Options to access more
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
23
Use Fast Find
Add a Code or Extension
When saving the phone number of an
automated service, you may include a pause
for dialing an extension.
1. From the home screen, enter a phone
number.
With Fast Find enabled, you can press one or
two keys to view closer matches in your
contacts list. See “Call Contact using Fast
Find” on page 52.
Add Contacts
Add Contacts from Home Screen
1. From the home screen, enter a phone
number to save (include the area code).
2. Select Options and a type of pause:
–
Time Pause causes the phone to stop
dialing for two seconds.
–
Hard Pause causes the phone to wait
until you select Release while making
the call.
2. Select Save > Save New Contact
.
3. Enter a name for the contact.
3. Enter the remaining numbers and select
Save > Save New Contact
4. Complete the contact information and
select Save
4. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
.
.
5. When done, select Save
.
Use Contacts
Add Contacts from Contacts Menu
1. From Add New, enter a name for the
contact. Scroll down to the next field when
done.
Call Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
2. Enter a primary number for the contact.
3. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
3. Select Options > Call
.
Send a Text Message to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number or email address.
4. When done, select Save
.
3. Select Options > Send Text Msg
4. Complete your text message and select
Send
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
24
Add Contacts
Send a Contact vCard
Assign Ringers to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
3. Select Options > Send as vCard > via
Bluetooth to send to a Bluetooth-enabled
device.
3. Select Options > Ringer > Assign Ringer
and a ringer from the list. (Scroll to play the
ringers.)
4. Complete the appropriate task to send the
contact information.
Assign Message Tones to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
Customize Contacts
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. (Scroll to
play the ringers.)
Edit Contact Details
1. From View All, select a contact.
2. At the contact details screen, select Edit
.
3. Enter additional phone numbers, email
Assign Pictures to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
3. Select Options > Picture > Assign Picture
to assign a picture.
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
4. When done, select Save
.
Assign Number Types
1. From View All, select a contact.
2. At the contact details screen, select Edit
3. Press down twice to scroll to the number
type dropdown and press the OK key.
4. Select a number type. The appropriate icon
appears next to the number in your contacts
list.
Add a Prefix to Phone Numbers
Use Prepend to add a prefix, such as an area
code, to a phone number:
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
.
3. Select Options > Prepend to enter the
prefix at the beginning of the number.
5. Select Save
.
4. Select Save
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
25
Assign Speed Dials to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
Visit Web Addresses
1. From View All, select a contact.
2. At the contact details screen, highlight a
Web address.
3. Select Options > Add Speed Dial
.
3. Select Options > Launch Web.
4. Select a location from the list to assign the
speed dial number.
Erase Contacts
Change Primary Numbers
When a contact has more than one number, the
first number becomes the primary number by
default. To change the contact’s primary
number:
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
Erase Contact Details
1. From View All, select a contact.
2. At the contact details screen, highlight a
number, address or note.
3. Select your desired erase option and then
select Yes. For example, to erase an email
address, select Options > Erase Address >
Yes
.
3. Select Options > Primary Number > Yes
.
Erase an Entire Contact
Add Contacts to Groups
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
1. From View All, select a contact.
2. At the contact details screen, highlight a
number or email address.
3. Select Options > Erase Contact > Yes to
erase the entire contact.
3. Select Options > Add To Group
.
4. Select groups from the list provided. A
checkmark appears next to each selection.
You can also remove a checkmark.
Erase All Contacts
From Erase Contacts, select Contacts Only >
Yes > Yes to erase all your contacts.
Note: You cannot recover deleted information.
5. When finished, select Done
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Erase Contacts
26
Erase All Contacts and Groups
Send Text Messages to Groups
From Erase Contacts, select Erase All > Yes
> Yes to erase all your contacts and groups.
Note: You cannot recover deleted information.
1. From Groups, highlight a group.
2. Select Options > Send Text Msg
.
3. Complete your text message and select
Send
.
Contact Groups
Add or Remove Contacts from Groups
You can assign your contacts to groups. Your
phone comes with default groups. You can also
create your own groups.
1. From Groups, highlight a group.
2. Select Options > Edit
.
3. If you are modifying a group you created,
select Next. Otherwise, go to the next step.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
View Groups
1. Select Groups to view your preloaded
groups, followed by the custom groups you
have created.
2. Highlight a group and do one of the
following:
5. When finished, select Done
.
–
Press the OK key to view the group
details.
Assign Ringers to Groups
1. From Groups, select a group.
2. At the group details screen, scroll to the
group name.
–
–
Select New to create a new group.
Select Options to access more
functions.
3. Select Options > Ringer > Assign Ringer
and a ringer from the list. (Scroll to play the
ringers.)
Create a New Group
1. From Groups, select New
.
2. Enter a name for the group and select Next
3. Select contacts from the list provided. A
checkmark appears next to each selection.
You can also remove checkmarks.
.
Assign Message Tones to Groups
1. From Groups, select a group.
2. At the group details screen, scroll to the
group name.
4. When finished, select Done
.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. (Scroll to
play the ringers.)
Your new group appears the next time you
view your groups list.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
27
Assign Pictures to Groups
1. From Groups, select a group you have
created.
2. At the group details screen, scroll to the
group name.
Speed Dial List
Assign Speed Dial Numbers
1. From Speed Dial List, highlight an
unassigned number (marked as empty).
2. Select Assign
.
3. Select Options > Picture > Assign Picture
to assign a picture.
3. At the contacts list, select a contact.
4. At the contact details screen, select a phone
number.
Create a Message Group
You can create a group specifically for
messaging, based on a contact group.
1. From Groups, highlight a group.
Clear Speed Dial Numbers
1. From Speed Dial List, highlight an
assigned number.
2. Select Options > Create Msg Group
3. Modify the name for the group and select
Next
.
2. Select Erase > Yes
.
.
Check Contacts
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
Select Contacts Count to check how many
contacts you have stored.
5. When finished, select Done
.
Your new message group appears the next time
you view your message groups list.
Erase a Group
1. From Groups, highlight a group.
2. Select Options > Erase > Yes
.
Erase All Groups
From Erase Contacts, select Groups Only >
Yes > Yes to erase all your groups.
Note: You cannot recover deleted information
or erase preloaded groups.
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dial List
28
6
Media Gallery
Use Media Gallery to retrieve and playback media files and other downloads.
Media Gallery Menu
Select Media Gallery from the main menu to access the following functions:
Level 1 >
Level 2 >
Images
Level 3
Media Gallery
Access these options: Saved Images
Screensavers, and Caller IDs
,
Wallpapers
Ringers, and Voice
Sounds Only, and
,
.
Sounds
Access these options: Saved Sounds
,
Memos
.
Delete All
Access these options: Images Only
,
Delete All
.
Assign a Caller ID
Images
Send an Image
1. From Saved Images, select an image.
2. Select Send > via Bluetooth to send to a
Bluetooth-enabled device.
1. From Caller IDs, select an image.
2. Select Assign
.
3. At the contacts list, select a contact.
Sounds
3. Complete the appropriate task.
Send a Sound
Change the Default Wallpaper
1. From Saved Sounds, highlight a sound.
2. Select Send > via Bluetooth to send to a
Bluetooth-enabled device.
1. From Wallpapers, select a wallpaper.
2. Select Set Default
.
3. Complete the appropriate task.
Change the Default Screensaver
1. From Screensavers, select a screensaver.
2. Select Set Default
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
29
Assign a Ringer
Assign a File
1. From Ringers, highlight a ringer.
2. Select Assign and choose how you want to
assign the ringer.
1. From a media file list, highlight a file.
2. Select Options > Assign and choose how
to assign the file.
3. Complete the appropriate task.
3. Complete the appropriate task.
Play a Voice Memo
Lock a File
1. From Voice Memos, highlight a memo you
have recorded.
1. From a media file list, highlight a file.
2. Select Options > Lock to protect a file
from being accidently erased. To unlock the
2. Select Play
.
file, select Options > Unlock
.
Use the Navigation key to control the
playback tools displayed.
Play a File
1. From a media file list, highlight a file.
2. Select Options > Play
Media File Options
.
Use the Navigation key to control the
playback tools displayed.
Rename a File
1. From a media file list, highlight a file.
2. Select Options > Rename
3. Enter a new name and select Save
You can only rename unlocked files. Preloaded
files on your phone are always locked.
.
View File Details
.
1. From a media file list, highlight a file.
2. Select Options > Details to view the
details such as file size or save date.
3. Select OK to exit.
Send a File
1. From a media file list, highlight a file.
2. Select Options > Send > via Bluetooth to
send to a Bluetooth-enabled device.
3. Complete the appropriate task.
Erase Media Files
Erase a Single File
1. From a media file list, highlight a file.
2. Select Options > Erase > Yes
.
You can only erase unlocked files. Preloaded
files on your phone are always locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Media File Options
30
Erase All Files in a Folder
From a media file list, select Options > Erase
All > Yes
.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Image Files
From Delete All, select Images Only > Yes to
erase all files in the Images folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Sound Files
From Delete All, select Sounds Only > Yes to
erase all files in the Sounds folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Media Files
From Delete All, select Delete All > Yes to
erase all files in the Media Gallery folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
31
7
Tools & Games
Tools & Games Menu
Select Tools & Games from the main menu to access the following functions:
Level 1 >
Level 2 >
Level 3
Tools & Games
Brick Attack
Voice Memo
Scheduler
Play Brick Attack.
Access these options: Record New and Recorded Memos
.
Access these options: Add New Event
,
View Month, View
Day Go to Date View All Events, and Settings.
,
,
Alarm Clock
Tip Calculator
Calculator
Timer
Set an alarm.
Calculate a tip.
Perform basic calculations.
Set a countdown timer.
Use a stopwatch timer.
Stopwatch
3. Select New to start the game. You have the
Play Brick Attack
following options:
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of the
screen.
–
Use the Navigation key to move the
paddle.
–
–
–
Press the Back key to pause the game.
Select Resume to restart the game.
1. Select Brick Attack
2. You may see a notification, select Yes or
No
.
Select Options
>
Exit to exit the game.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tools & Games Menu
32
–
–
Scroll left or right to move between
month, day, and year fields.
Scroll up or down to change month,
day, and year.
Voice Memo
Use Voice Memo to record and play back
audio memos.
Press the OK key to save and move to the
Record Voice Memos
next field.
1. From Voice Memo, select Record New
2. Record your voice memo and select Stop
when done.
.
4. Press the OK key to change the time, if
needed.
–
–
Scroll left or right to move between
hour, minute, and AM/PM fields.
Scroll up or down to change hour,
minute, and AM/PM.
3. Select Save
.
If you receive an incoming call while recording
a memo, the memo is saved and the incoming
call screen appears.
Press the OK key to save and move to the
next field.
5. Press the OK key to change the duration, if
Play Voice Memos
needed.
1. From Recorded Memos, highlight a
memo.
–
–
Scroll left or right to move between
hour and minute fields.
2. Select Play to play the memo or Options to
access more features.
Scroll up or down to change hour and
minute.
Press the OK key to save and move to the
next field.
Scheduler
6. Press the OK key to select a priority from
Use Scheduler to schedule events and set
the list.
reminder alerts.
7. Press the OK key to select a reminder from
the list.
Create an Event
1. From Add New Event, enter a name.
Scroll down to move to the next field when
done.
8. Press the OK key to select a reminder
sound from the list.
9. Press the OK key to select During Event
to enable silent mode or Off to have normal
sounds.
2. Press the OK key to select an event type
from the list.
10. Press the OK key to select a recurring
3. Press the OK key to change the date, if
needed.
event from the list, if needed.
11. Select Save
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
33
Return to the Current Date
From View Day, select Options > Go to
Today to return to the current date.
View Events
View Events by Month
1. From View Month, scroll through the
month view. (Days with events are
highlighted.)
Sort Events by Time
From View All Events, select Options > Sort
2. Press the OK key to select a date.
3. Do one of the following:
by Time to sort events by time.
Sort Events by Type
From View All Events, select Options > Sort
by Type to sort events by their assigned type.
–
Scroll left or right to move to another
date.
–
–
Select an event.
Scroll to a time and select Add New to
create a new event.
Sort Events by Priority
From View All Events, select Options > Sort
by Priority to sort events by their assigned
priority.
–
Select Options to access more features.
View Events by Date
From View Day, do one of the following:
Modify Events
•
•
•
Scroll left or right to move to another date.
Select an event.
Scroll to a time and select Add New to
create a new event.
Edit an Event
1. From View Day, select an event.
2. At the event details screen, select Options
•
Select Options to access more features.
> Edit
.
3. Modify the event and select Save
.
Go to a Specific Date
1. From Go to Date, scroll left or right to
move between month, day, and year fields.
Scroll up or down to change month, day, or
year.
Send an Event
1. From View Day, select an event.
2. At the event details screen, select Options
> Send > via Bluetooth to send the file to a
Bluetooth-enabled device.
2. Press the OK key to select the date.
3. Complete the appropriate task.
View Events by List
From View All Events, select an event from
the list or Options to access more features.
Download from Www.Somanuals.com. All Manuals Search And Download.
Scheduler
34
Copy an Event
1. From View Day, select an event.
2. At the event details screen, select Options
Change Scheduler Settings
From Settings, you can modify the following
features.
> Copy
.
Set Scheduler Hours
1. From Scheduler Hours, modify the start
3. Enter a new name for the event.
4. Complete the event and select Save
.
and end times.
–
–
Scroll left or right to move between
hour, minute, and AM/PM fields.
Scroll up or down to change hour,
minute, and AM/PM.
Erase Events
Erase an Event
1. From View Day, select an event.
2. At the event details screen, select Options
> Erase > Yes
2. Select Save when done.
.
Erase Events Automatically
Erase the Current Day’s Events
From Auto Erase, select an option from the
list to set when to automatically erase your past
events.
From View Day, select Options > Erase
Today’s Events > Yes to erase all events on
that day.
Set Event Priority
From Priority, select an option to set every
Erase All Events
From View All Events, select Options >
Erase All Events > Yes to erase all events
from the phone.
event you create with this priority type.
Set Event Reminder
From Reminder, select an option to set every
event you create with this reminder setting.
Note: You cannot recover deleted information.
Erase All Past Events
Set Event Reminder Alert
From View All Events, select Options >
Erase All Past Events > Yes to erase all past
events from the phone.
From Reminder Sound, select an option to set
every event you create with this reminder alert.
(Scroll to listen to sounds.)
Note: You cannot recover deleted information.
Set Event Silent Mode
From Silent Mode, select an option to set
every event you create with this silent mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
35
Set the Quick Alarm
Alarm Clock
1. From Alarm Clock, scroll to the quick
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
alarm and select Set
.
2. Choose a time. (A notification shows the
quick alarm is on.)
When the quick alarm rings, select Off to turn
off the alarm, or Reset to set the quick alarm
again.
Note: The alert occurs only if the phone is on.
Set an Alarm
1. From Alarm Clock, scroll to one of the
alarms and select Set
.
2. Press the OK key to change the time, if
needed.
Use Tip Calculator
–
–
Scroll left or right to move between
hour, minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
1. From Tip Calculator, enter the amount of
your bill and select Next
.
2. Scroll down to select the percentage you
want to tip.
Press the OK key to save time and move to
the next field.
The total bill with tip is displayed. If you
are finished, select Done. Otherwise, go on
to the next step.
3. Press the OK key to select a sound from the
list.
4. Press the OK key to select a recurring
alarm from the list, if needed.
5. Press the OK key to enter a note.
3. Scroll down to enter the number of people
sharing the bill (or enter 1 if paying the
entire bill).
4. Select Next to view the final bill.
5. Select Done when finished.
6. Select Save
.
When the alarm rings, select Stop to turn off
the alarm or Snooze to set the alarm to ring in
another ten minutes.
Use Calculator
1. From Calculator, enter the first number.
2. Select a mathematical operation:
–
–
–
–
Scroll left to multiply.
Scroll right to divide.
Scroll up to add.
Scroll down to subtract.
Your selection will appear highlighted.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Alarm Clock
3. Enter the second number, and press the OK
key to view the result.
4. Select Exit to return to the menu, or
Options and one of the following:
Use Stopwatch
From Stopwatch, select from the following
options:
•
•
•
Start begins counting.
Stop pauses counting.
Reset clears the stopwatch.
–
MS replaces the value currently stored
in memory with the displayed result on
the screen.
Press the Back key to exit.
–
–
–
M+ adds displayed result on the screen
to the value currently stored in memory.
MR displays value currently stored in
memory on the screen.
MC clears value currently stored in
memory.
Use Timer
The timer counts down for the specified time.
It beeps when that amount of time has elapsed.
1. From Timer, select Set
.
2. Enter the time length.
–
Scroll left or right to move between
hours, minutes, or seconds fields.
Scroll up or down to change hours,
minutes, or seconds.
–
3. Select Sound, and choose from the list to
modify the sound.
4. To work the timer, select from the
following options:
–
–
–
Start begins the countdown.
Stop pauses the countdown.
Reset clears the timer.
When the countdown is complete, select Off to
silence the alarm.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
37
8
Messaging
Use Messaging to send, receive, and erase messages from your phone.
Messaging Menu
Select Messaging from the main menu to access the following functions:
Level 1 >
Level 2 >
Level 3
Messaging
New Text Msg
Voicemail
Inbox
Compose a text message.
Shows how many voicemails are waiting.
Shows a list of received text messages.
Shows how many alerts are waiting.
Shows a list of messages you have successfully sent.
Browser Alerts
Sent Msgs
Outbox
Shows a list of messages you have sent, but are pending or
failed.
Saved Msgs
Drafts
Shows a list of messages you have saved.
Shows a list of messages that have been started, but saved to
be completed at a later time.
Msg Settings
Access these options: Alerts
QuickText Callback Number
Default Text Text Msg Receipt
Erase Recent List
,
Msg List View
Save to Sent
Voicemail Number, and
,
Signature
,
,
,
,
Auto-Erase,
,
,
.
Message Groups
Erase Msgs
See a list of your message groups.
Access these options: Inbox Outbox Sent Msgs, Saved
,
,
Msgs Drafts, and All.
,
Message Count
Check how many messages you have.
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
Messaging Menu
38
Add Recipients from Contacts
Send Messages
Create a Text Message
You can only send text messages to phone
numbers capable of receiving them or to email
addresses if supported.
1. At the compose message screen, select
Options > Contacts when entering a phone
number or email address.
2. Select a contact from the contacts list.
3. Select a number or address.
1. From New Text Msg, enter a recipient’s
phone number or email address. (Select
Options to access contacts, groups or
recently used addresses. Scroll down to
move to the next field when done.)
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses.
4. Complete your message.
Add Recipients from Recent List
1. At the compose message screen, select
Options > Recent List when entering a
phone number or email address.
2. Select a number or address.
3. Complete your message.
2. Enter the message. (Select Options to
access more features.)
Add Recipients from Recent Calls
1. At the compose message screen, select
Options > Recent Calls when entering a
phone number or email address.
2. Select a number.
3. When done, select Send
.
Receive Calls while Creating Messages
If you receive a call while creating a message a
notification appears. Do one of the following:
3. Complete your message.
•
Select Ignore to ignore the call and return
to the message screen.
Send to Groups
•
Press the Send key to answer the call and
your phone automatically saves the
1. At the compose message screen, select
Options > Message Groups when entering
a phone number or email address.
2. Select a group.
message to Drafts
.
Enter Message Recipients
3. Complete your message.
The following describes how to add recipients
to your messages, depending on the services
provided. Check with your service provider for
availability.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
39
Save Recipients as Contacts
Use Preset Text
1. At the compose message screen, select
Options > Save Address when entering a
phone number or email address.
Add Preset Text
1. At the compose message screen, select
Options > Insert QuickText when
entering the text.
2. Select a preset text entry.
3. Complete your message.
2. Select a number or address.
3. Select Options > Save New Contact (to
create a new contact) or Options > Add to
Contact (to add the number or address to
an existing contact).
Save Messages as Preset Text
1. At the compose message screen, select
Options > Save as QuickText when
entering the text to use it later as preset text.
2. Complete your message.
Add Recipients from Message Text
1. At the compose message screen, select
Options > Add Address when entering the
text to add more recipients.
2. Enter a number or address to add.
3. Complete your message.
Save Received Messages as Preset Text
When viewing a received message, select
Options > Save as QuickText to use it later as
preset text.
Save Messages to Drafts
At the compose message screen, select
Options > Save Message when entering the
text. Your phone saves the message to Drafts
for you to complete at a later time.
Set Individual Message Settings
The following describes how to set message
settings for individual messages.
Note: Your selection of each of the following
message settings overrides that selected for all
Complete Messages in Drafts
1. From Drafts, highlight your desired
message.
messages from Msg Settings
.
2. Select Edit or Options > Edit
3. Complete your message.
.
Request a Message Receipt
1. When entering a message, select Options >
Msg Settings > Msg Receipt > Request to
request a message delivery notice.
2. Complete your message.
Download from Www.Somanuals.com. All Manuals Search And Download.
Send Messages
40
Set Message Priority
Set the Validity Period
1. When entering a message, select Options >
Msg Settings > Set Priority to set the
priority level.
1. When entering a message, select Options >
Msg Settings > Validity Period
.
2. Select Set Time to set how long to keep
your message valid before removing it
from the phone if not sent.
2. Complete your message.
Change the Callback Number
1. When entering the message, select Options
3. Press the OK key to change the time.
–
Scroll left or right to move between the
hour, minute, and AM/PM.
> Msg Settings > Callback Number
.
2. Enter your callback number and select OK
.
–
Scroll up or down to change the hour,
minute, and AM/PM.
3. Complete your message.
4. Select Next
5. Press the OK key to change the date.
.
Send Messages Later
1. When entering a message, select Options >
Msg Settings > Send Later
2. Select Immediate or Set Time to set a
specific time to send the message.
–
–
Scroll left or right to move between the
month, day, and year.
Scroll up or down to change the month,
day, and year.
.
3. Press the OK key to change the time.
6. Select Done
7. Complete your message.
.
–
Scroll left or right to move between the
hour, minute, and AM/PM.
–
Scroll up or down to change the hour,
minute, and AM/PM.
Manage Received Messages
Reply to Text Messages
When receiving a message, your phone
displays a notification and the message icon
appears at the top of your screen. The message
icon flashes with an urgent message alert if the
message is urgent.
4. Select Next
5. Press the OK key to change the date.
.
–
–
Scroll left or right to move between the
month, day, and year.
Scroll up or down to change the month,
day, and year.
1. When a message notification appears,
select Inbox (to view the message) or
Ignore (to clear the notification).
6. Select Done
7. Complete your message. Your phone will
save the message and send it later.
.
An icon appears at the top of your screen
when you have an unread message.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
41
2. From Inbox, highlight a message and select
View > Reply (to compose your message)
or Options (to access more features).
Call a Number in a Message
When viewing a received message, press the
Send key to call a valid number in the
message.
3. Complete your message and select Send
.
Forward Messages
Go to Web Addresses in Messages
When viewing a received message, select
Options > Launch Browser to go to a web
address included in the message.
1. When viewing a received message, select
Options > Forward
2. Enter a number or address.
3. Complete your message and select Send
.
.
Sort Messages in Inbox
Reply with a Copy of the Message
1. From Inbox, select Options > Sort
.
1. When viewing a received message, select
2. Select a sort option.
Options > Reply with Copy
.
The original message appears in your reply
message.
Manage Voicemail
2. Complete your message and select Send
.
Configure your Voicemail
Before your phone can receive voicemail
messages, you need to set up a password and
record a personal greeting with your service
provider.
When you have set up your voicemail, all
unanswered calls to your phone are
automatically transferred to voicemail, even if
your phone is in use or turned off.
1. Press and hold the 1 key.
Save Received Messages
When viewing a received message, select
Options > Save Message to save it to Saved
Msgs
.
View Sender Information
When viewing a received message, select
Options > Sender to view an existing contact,
add to an existing contact, or create a new
contact depending on the sender.
2. Follow the system prompts to create a
password and record a greeting.
Lock Messages
When viewing a received message, select
Options > Lock Msg to protect it from
accidental deletion. To unlock the message,
select Options > Unlock Msg
.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Manage Voicemail
Check your Voicemail
When you receive a voicemail message, a
notification with a voicemail message icon
appears at the top of your screen.
Check Message Status in Outbox
Use the following symbols to check your
Outbox for the status of messages sent but still
in process.
•
At the voicemail notification, select Call to
call your voicemail number and follow the
system prompts to retrieve the message.
Select Ignore to clear the notification
without checking messages. The
notification icon remains on top of the
screen until you listen to the message.
When only the voicemail message icon
appears on top of the screen, select
Voicemail and follow the system prompts
to retrieve the message.
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
The message cannot be sent because
service is not available. An alert appears
on your phone if the message cannot be
sent.
•
Unable to Send Messages
You may not be able to send or receive
messages if your phone’s memory is nearly
full, or if digital service is not available at the
time. To free up memory, erase old messages.
Manage Sent Messages
Check Message Status in Sent Folder
Use the following symbols to check the Sent
folder for the status of messages successfully
sent.
Appended Messages
If you go over the character limit for a single
message, the phone may automatically append
an empty segment to your message to make
space.
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
Warning: Your service provider may charge
you for each message segment.
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down
as you enter characters, until it reaches 0.
If you continue to enter text after this counter
reaches 0, a message segment may be
appended. When you reach the message size
The message was sent. You cannot
cancel delivery of the message.
The message has been received.
The message has been sent to more than
one recipient.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
43
limit, you are prompted to edit the message or
alerted that the message is being appended.
Note: Appended messages may not be
available on all phones. Check with your
service provider.
Set Voicemail Alerts
1. From Alerts, select Voicemail Alert
.
2. Select an alert for voicemails.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
Manage Browser Alerts
1. From Browser Alerts, select an alert.
2. Select Connect to launch the browser.
Ignore
.
Set Message List View
Message Settings
From Msg List View, select one of the
following to set your message list display:
The following message settings affect all
messages unless you change them for
individual messages.
•
•
•
•
Sender & Preview displays the sender and
first part of messages.
Sender & Date-Time displays the sender
and sent time of messages.
Msg Preview displays the first part of
messages.
Sender displays the message sender.
Set Message Alerts
1. From Alerts, select Msg Alert
2. Select an alert for messages.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
.
Set your Signature
You can create a signature to appear at the end
of all outgoing messages.
Ignore
.
1. From Signature, enter your signature.
2. Select OK to save the signature.
Note: The signature counts towards the
character limit of your message.
Set Page Alerts
1. From Alerts, select Page Alert
.
2. Select an alert for pages.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
Ignore
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Browser Alerts
44
From Auto-Erase, select one of the following:
Edit Preset Messages
•
•
Disabled erases no messages.
Inbox Msgs erases old messages in Inbox
when memory is needed.
Your phone comes with preset messages, such
as “Please call me,” which you can insert into
the body of a text message. You can edit or
create up to 40 preset messages.
•
•
Sent Msgs erases old messages in Sent
Msgs when memory is needed.
Both erases old messages in both Inbox
and Sent Msgs when memory is needed.
1. From QuickText, do one of the following:
–
Scroll to a preset message and select
Edit
.
–
Select New Msg to create a new preset
message.
Set Default Text
You can change the default text entry mode
when creating a text message. This setting
applies only to the Message field, not the Send
To field.
2. Enter or edit the text.
3. Select Save
Note: You can also save messages you have
.
written or received as preset messages.
From Default Text, select Normal Alpha (to
enter text letter by letter) or Rapid Mode (to
enter text with word recognition).
Set Callback Number
1. From Callback Number, enter a new
number to change your default callback
number.
Request Text Message Receipts
From Text Msg Receipt, select Request to
request a notification when a recipient has
received your text message.
2. Select OK to save the number.
Enable Save to Sent
From Save to Sent, select Enabled to
automatically save outgoing messages to the
Sent Msgs folder.
Set your Voicemail Number
Often your service provider automatically
programs your voicemail number (the number
your phone calls to retrieve voicemail). To
change it:
1. From Voicemail Number, select Edit
2. Enter your voicemail number. (Use
Enable Auto-Erase
Use Auto-Erase to set your phone to erase
messages automatically when it needs memory
for incoming messages.
.
Options > Time Pause or Hard Pause to
enter pauses.)
3. Select Save
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
45
Erase Recent List
Send Text Messages to Message
Groups
From Erase Recent List, select Yes to clear
the list of recipients you have recently sent
messages to.
1. From Message Groups, highlight a group.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
Message Groups
.
You can create groups for messaging.
Add Contacts to Message Groups
1. From Message Groups, highlight a group.
View Message Groups List
1. From Message Groups, view your
preloaded groups, followed by the custom
groups you have created.
2. Highlight a group and do one of the
following:
2. Select Options > Edit
.
3. If you are modifying a group you created,
select Next. Otherwise, go to the next step.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
–
Press the OK key to view the groups
details.
–
–
Select New to create a new group.
Select Options to access more
functions.
5. When finished, select Done
.
Assign Message Tone to Message
Group
1. From Message Groups, select a group.
2. At the groups details screen, scroll to the
group name.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. Scroll to
play the ringers.
Create a New Message Group
1. From Message Groups, select New
2. Enter a name for the group and select Next
3. Select contacts from the list provided. A
check mark appears next to each selection.
You can also remove checkmarks.
.
.
4. When finished, select Done
.
Erase a Message Group
1. From Message Groups, highlight a group.
Your new group appears the next time you
view your groups list.
2. Select Options > Erase > Yes
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Groups
46
Erase Messages
Erasing old messages frees up memory in your
phone. You can erase messages as you send or
read them, erase them one at a time, or erase
them all at once.
Erase a Single Message
When viewing a received message, select
Options > Erase > Yes
.
Note: You can erase a scheduled message, but
cannot cancel its delivery.
Erase Messages from a Folder
From Erase Msgs, select a folder to erase
messages from. For example, to erase received
messages, select Inbox > Yes
.
Note: You cannot recover deleted information.
Erase All Messages
From Erase Msgs, select All > Yes to erase all
messages from all folders, except for voicemail
messages.
Note: You cannot recover deleted information.
Check Message Count
From Message Count screen, check how
many messages you have stored.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
47
9
Settings
Settings Menu
Select Settings from the main menu to access the following functions:
Level 1 >
Settings
Level 2 >
Level 3
Bluetooth
Convenience
Access these options: On/Off My Devices, and Settings.
,
Access these options: Set Date/Time (with Airplane Mode
enabled), Airplane Mode
1-Touch Dialing Answer Hold
Minute Alert
,
Auto Keyguard
,
Auto-Hyphen
,
,
,
,
Fast Find,
Frequent List
,
Missed Call Alert, and Any Key Answer
.
Display
Access these options: Set Wallpaper
Themes Main Menu View My Banner
Brightness Contrast Language, and Date/Time Format.
,
Set Screensaver
,
,
,
,
Backlighting,
,
,
Sounds
Access these options: Ringers Ringer Mode Volume Pwr
,
,
,
On/Off, and Keypad
.
Accessories
Network
Access these options: Headset Sounds, Auto-Answer, Com
Port Speed TTY Device, and T-coil Hearing Aid.
,
Access these options: Privacy Alert Voice Privacy,
,
Roam/Svc Alert
,
Roam Option
,
Set Phone Line
,
Location
,
Web Alert, and Roam Call Alert
.
Security
Access these options: Lock Phone
Lock Code
,
Limit Calls, and New
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings Menu
48
3. At the device list, highlight a device and
select Add
Accept the pairing if prompted.
4. If necessary, enter the password provided
with the Bluetooth device and select OK
With the password accepted, the device
appears in your device list.
Bluetooth
.
The Bluetooth® wireless technology (not
available on all phones) enables wireless
connectivity with accessories such as portable
or installed hands-free car kits, phones,
handsets, computers, and so on. For details,
check with your service provider.
.
You must use a Bluetooth device (compatible
with Class 2 Bluetooth wireless technology,
version 1.2) in order to use this phone
wirelessly. Bluetooth accessories display a
symbol on your phone.
Use Bluetooth Devices
Connect to a Device
Before you can use Bluetooth, you must get
your phone ready to communicate with a
device. This is called “connecting.”
To connect your phone to a Bluetooth device,
from My Devices, highlight a device and select
Enable Bluetooth
Before you can connect your phone with a
Bluetooth device, you need to enable the
Bluetooth feature on your phone.
From On/Off, select On
.
Connect.
A notification appears confirming the
connection. You can now use the device with
your phone.
Pair with a Device
To enable your phone to communicate with a
Bluetooth device, you need to "pair" the device
with your phone. The following instructions
describe the process. You may also need to
reference the user guide provided with your
Bluetooth device.
Disconnect from a Device
From My Devices, highlight a connected
device and select Disconnect
.
Rename a Device
1. Prepare the Bluetooth device (accessory)
for pairing as described in the device’s user
guide.
2. From My Devices, select Find New. Your
phone then searches and detects any
available Bluetooth devices in the vicinity.
You must enable the Bluetooth feature on
your phone.
1. From My Devices, highlight a device.
2. Select Options > Rename
3. Enter a new name and select Save
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
49
Delete a Device
View Supported Services
You can delete a Bluetooth device that you
have paired your phone with.
Select Services to view a list of the Bluetooth
service profiles your phone supports.
1. From My Devices, highlight a device.
Enable OBEX Authentication
2. Select Options > Delete > Yes
.
From OBEX Authentication, select Enabled
With object exchange (OBEX) authentication
enabled, you need a user name and password to
transfer files via Bluetooth.
.
View Device Services
A Bluetooth device paired with your phone
may have more than one service profile (such
as Headset, Handsfree, and so on). Do the
following to check the services available:
1. From My Devices, highlight a device.
Convenience
Use these settings to make your phone more
convenient to use.
2. Select Options > Services
.
3. At the service list, highlight a profile and
Set Date and Time
select Connect to change the active profile.
In Airplane mode, you can set the time and
date manually.
Change Bluetooth Settings
From Settings, you can modify the following
Bluetooth features.
Note: You can only access Set Date/Time with
Airplane Mode enabled.
1. From Set Date/Time, do the following to
change the date:
Change Phone’s Name
–
Scroll left or right to move between the
month, day, and year fields.
Scroll up or down to change the month,
day, and year.
You can change the name presented for other
Bluetooth devices’ search of your phone.
From My Name, enter a new name and select
–
Save
.
2. Press the OK key to save the date.
3. Do the following to change the time:
Limit Visibility
–
Scroll left or right to move between the
hour, minute, and AM/PM fields.
Scroll up or down to change the hour,
minute, and AM/PM.
By default your phone is always visible, if set
to visible mode. You can limit the time your
phone is visible to other Bluetooth devices.
From Visible Duration, select an option to set
the phone visible for your selected time before
becoming invisible.
–
4. Press the OK key to save the time.
5. Select Done
.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Convenience
Enable Airplane Mode
Enable Auto-Hyphenation
While in an airplane, it is normally required
that you turn off your mobile phone because it
emits RF signals that interfere with air traffic
control. In airplane mode, however, your
phone does not emit RF signals. You cannot
make or receive calls, send text messages, use
the Browser or Bluetooth, but you can play
games, use the Scheduler, set the clock, and
make emergency calls to designated
emergency numbers. Please check with
uniformed personnel before operating your
phone in Airplane mode.
Auto-hyphenation, when enabled,
automatically inserts hyphens into your phone
numbers to be consistent with the U.S. dialing
plan (or the North American Numbering Plan).
From Auto-Hyphen, select Enabled to turn on
auto-hyphenation.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a
speed dial location assigned to a contact.
From 1-Touch Dialing, select Enabled to turn
on 1-touch dialing.
From Airplane Mode, select Enabled > OK
to activate airplane mode.
With airplane mode enabled, you can also set
the time and date manually.
Auto Keyguard
Enable Auto Keyguard
Use Auto Keyguard to automatically lock the
keypad after 30 seconds of inactivity to prevent
accidental key presses.
Answer Hold
Enable Hold Call
Use Answer Hold to place incoming calls on
hold until you are ready to answer them.
From Auto Keyguard, select Enabled or from
the home screen, press and hold the * Shift
key.
1. From Answer Hold, select Enabled
.
If you have not recorded a hold message,
you need to record one, such as “Please
hold. I’ll answer in a minute.”
Unlock Keyguard
From the home screen, select Unlock and press
the * Shift key to unlock the keypad.
2. Record the message twice, as prompted.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
51
3. Select Save or Options and one of the
Call Contact using Fast Find
1. From Fast Find, select Enabled to turn on
fast find.
2. From the home screen, press the keys
corresponding to the letters of the name
you want to find. A matching contact or
speed dial entry appears.
following:
–
–
Play to replay your message.
Re-Record to record your message
again.
–
Exit to exit.
The next time a call comes in, you can place it
on hold.
3. Scroll to your desired contact and press the
Send key to call the number.
Place a Call on Hold
You can place a call on hold with Answer
Enable Frequent List
Hold enabled.
From Frequent List, select Enabled. With
Frequent List enabled, the last 15 of your
most frequently called contacts appear at the
beginning of your contacts list. Scroll past the
double line to view the entire contacts list.
Note: If you are already on a call and you
receive another call, you cannot place the
incoming call on hold. With no call waiting
enabled, the call goes to Voicemail
.
When a call comes in, do the following:
1. Select Options > Answer Hold to place
the caller on hold with your recorded hold
message.
2. Select Answer to speak to the caller on
hold or End Call to hang up without
speaking.
Enable Minute Alert
From Minute Alert, select Enabled. Your
phone alerts you with a short beep ten seconds
before each minute passes during a call.
Set Missed Call Alert
From Missed Call Alert, select an alert type
for missed calls.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
Change Hold Call Message
1. From Answer Hold, select Re-Record
Msg
.
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
–
–
Play to replay your message.
Re-Record to record your message
again.
Ignore.
–
Exit to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenience
52
Enable Any Key Answer
From Any Key Answer, select Enabled to
answer calls when you press any key on the
keypad.
Set Theme
From Themes, select a color theme for the
display background.
Set Main Menu View
From Main Menu View, select one of the
following:
Create a Custom Menu
1. From the home screen, scroll up and hold.
2. Select Edit
.
•
Grid displays icons of each menu item,
with its name at the top of the screen.
List displays a list of all menu items.
3. Select features from the list provided. A
check mark appears next to each selection.
You can also remove checkmarks.
4. Select Save after selecting all your options.
Your new selections appear the next time you
select your custom menu.
•
The next time you view the Menu, your
selected menu style appears.
Set Greeting Banner
The banner is the personal label for your
phone, appearing on the home screen above the
time and date.
Display
Set Wallpaper
You can select a wallpaper for your phone’s
home screen.
1. From My Banner, select Edit
.
2. Press the Back key to clear the current
banner.
3. Enter your new text (up to 14 characters).
1. From Set Wallpaper, select Saved Images
or Wallpapers
.
2. Select a file.
4. Select Save.
To turn off wallpaper, select None
.
Set Backlight Duration
Use Backlighting to minimize the bright time
and maximize the battery life.
Set Screensaver
Screensavers appear on the home screen,
activated ten seconds after the last keypress.
Incoming calls and alerts override the
screensavers.
1. From Set Screensaver, select Saved
Images or Screensavers
.
2. Select a file.
To turn off screensaver, select None
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
53
From Backlighting, select one of the
following:
Ringers
From Ringers, you can modify the following
•
•
Always Dim forces the backlight to remain
dim before turning off.
settings.
Set Ringers
7 Seconds 10 Seconds, 15 Seconds, or 30
,
Seconds turns backlighting on for the set
time after your last keypress.
From Ringer Type, select a ringer. (Scroll
down the list to play the ringers.)
•
Always Bright forces the backlight to
remain bright before turning off.
Enable Roam Ringer
From Roam Ringer, select Enabled to
activate a specific ringer for roaming calls.
Set Brightness
1. From Brightness, scroll to change the
brightness level.
Set Ringer Mode
Your phone is set to make sounds when you
receive calls, press keys, navigate through
menus, and receive alerts (such as new
messages). You can silence all sounds and set
the phone to vibrate or light up when you
receive calls and alerts.
2. Select Save
.
Set Contrast
1. From Contrast, scroll to change the
contrast level.
2. Select Save
.
From Ringer Mode, select one of the
following:
Set Language
From Language, select a language.
•
Normal Sounds rings for the incoming call
or alert (in effect, returning the phone to a
non-silent mode).
Set Time and Date Format
From Date/Time Format, select a time and
date format.
•
•
Vibrate Only vibrates for the duration of
the incoming call or other alerts.
Vibe Then Ring vibrates for the first ten
seconds and then rings for the remainder of
the incoming call alert.
Sounds
Your phone has several settings that control the
sound. You can select from a variety of ringers
and adjust the volume.
•
Lights Only lights up for the duration of
the incoming call or other alerts.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sounds
54
You can also press and hold the # Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Set Power On/Off Sounds
From Pwr On/Off, select Enabled to have
your phone play the sound when turned on.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Keypad
From Keypad, you can modify the following
settings.
Volume
Set Key Press Sounds
From Key Sounds, select Tone Click, or Off
From Volume, you can modify the following
,
settings.
to set the sounds you hear when pressing the
keypad.
Set Ringer Volume
1. From Ringer Volume, scroll right or left to
set the ringer volume.
Set Key Tone Length
From Key Length, select Normal or Long to
set the length of the keypad tone.
2. Press the OK key to save.
Set Speakerphone Volume
1. From Spkrphone Volume, scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From Headset Sounds, select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).
Set Earpiece Volume
1. From Earpiece Volume, scroll right or left
to set the earpiece volume.
2. Press the OK key to save.
Set Keypad Volume
1. From Key Volume, scroll right or left to set
the keypad volume.
2. Press the OK key to save.
Enable Auto-Answer
From Auto-Answer, select After 5 seconds
The phone automatically answers after five
seconds with a headset attached.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
55
Set Com Port Speed
Network
Enable Privacy Alert
From Privacy Alert, select Enabled to set
your phone to alert you when enhanced digital
CDMA privacy is lost or regained.
From Com Port Speed, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the
notification.
Enable Voice Privacy
From Voice Privacy, select Enhanced to use
enhanced digital CDMA privacy.
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
From Roam/Svc Alert, select one of the
following:
3. Select one of the following:
–
–
–
TTY Off disables TTY.
TTY On enables TTY devices.
TTY On + Talk enables TTY devices
and voice carry over.
•
•
Disabled turns roaming service alert off.
When no svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
–
TTY On + Hear enables TTY devices
and hearing carry over.
Note: You can also enter ##889 with your
keypad and select TTY to enable TTY.
•
•
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Connect to Hearing Aid Device
With a T-coil hearing aid device (sold
separately) connected, you can enable the
hearing aid feature.
1. Connect the T-coil hearing aid device to
your phone.
2. From T-coil Hearing Aid, select OK >
Enabled
.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Network
From Location, select one of the following:
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
From Roam Option, select Automatic (to
allow roaming) or No Roaming (to disallow
roaming).
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code.
•
Location On shares your position
information, in addition to emergency
services.
Set Phone Line
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Note: You must first establish a second phone
line with your service provider. Once
established, a second phone number becomes
available in the menu for selection.
Set Web Alerts
You can set an alert to confirm the start or end
of a browser session.
From Web Alert, select one of the following:
•
•
•
At Start prompts when you start a session.
At End prompts when you end a session.
Both prompts when you start and end a
session.
From Set Phone Line, read the note and select
OK and one of the phone lines.
•
No Prompts sets for no prompts.
When using one line, you cannot receive calls
from the other. It would be as if the phone were
“off” for that number. Your voicemail,
however, still takes messages. All contacts and
settings are shared for both lines.
Enable Roaming Call Alert
You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone
is in Emergency Mode.
Set Location Information
From Roam Call Alert, select Enabled
.
Use Location to share your location
information with network services other than
emergency services (for example, 911, 111,
999 and 000) in serviced areas. This feature
works only when your phone is in digital
mode. You do have the option of turning off
the locator to emergency services.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept
or place a call while roaming, you must
press
1.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
57
Set Limit Calls
Security
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and your service provider’s numbers.
1. From Security, enter your four-digit lock
code.
This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information.
All security features are shielded by a
four-digit lock code (typically 0000 or the last
4 digits of your phone number).
2. Select Limit Calls and one of the
following:
Lock Phone
–
–
No Limit does not limit calls.
Limit Outgoing limits outgoing calls
while incoming calls still work.
Limit All limits both incoming and
outgoing calls.
Set Lock Phone
With your phone locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
1. From Security, enter your four-digit lock
code.
–
Change Lock Code
Change your lock code from the default.
1. From Security, enter your four-digit lock
code.
2. Select Lock Phone > OK and one of the
following:
2. Select New Lock Code > Yes
3. Enter a new four-digit code.
4. Re-enter your new lock code.
.
–
–
Now locks the phone immediately.
On power up locks the phone every
time you turn it on.
Unlock the Phone
1. From the home screen, select Unlock
.
2. Enter your four-digit lock code.
Download from Www.Somanuals.com. All Manuals Search And Download.
Security
58
10 Browser
You can use your phone to browse the Internet
if you have obtained phone Internet services
from your service provider and if over-the-air
Internet access is available in your area.
Add a Bookmark
1. Surf to the Web page you want to
bookmark and select Options > Add to
Bookmarks
.
2. Edit the bookmark’s details, if needed.
3. Select Options > Save to save the
bookmark.
To access your saved bookmarks, select
Options > Bookmarks from any web page.
Launch Browser
Select Browser to launch the browser. An alert
appears notifying of airtime fees, if you have
enabled web alerts. Select OK to continue.
If this is the first time you have connected to
the Internet, a message informs you that
security is not yet enabled for your browser.
Select Yes to enable security.
Browse the Web
A browser home page with a list of bookmarks
and some browser menu options appear when
you are connected to the Web. The lock icon
appears in a secure session. You can do the
following:
•
To choose a site, scroll to the link and press
the OK key.
•
An underline and an arrow indicate that
there is more text. Scroll down to view the
rest of the text.
•
Press the Back key to return to the previous
screen.
•
•
Press the End key to exit.
Select Options to access more browser
features.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
59
11 Downloads
2. Select an application type. A list of
applications appears. Long titles scroll left
as you highlight them.
3. Select an application. A list of usages
appears. There may be one or more usages
available. Prices are specified for each
usage.
4. Select a usage for the application. You are
prompted to confirm your purchase.
5. Select Yes to confirm. The application
downloads to your phone. Download times
may vary.
To open the application now, select Yes. If you
select No, you return to Downloads, where
you see a link to your new application.
Note: Your connection to the application
server automatically ends after 30 seconds,
unless you connect again to download more
apps. If you want to end the connection
manually, press the End key on your phone.
How does BREW Work?
Your Kyocera phone has the added ability to
download and manage applications through
BREW.
You connect to the server, download
applications, and then manage them as you
like. When you choose an application, you
have the option of choosing a demo, various
limited use options, or the full version—all
varying in price. If you choose a demo, BREW
lets you know when it has expired. If you
choose a priced version, the amount is added to
your phone bill. BREW also lets you know if
you are running out of memory. At that point,
you can either disable an application or remove
it completely.
Once applications are loaded, you can update
to newer versions as they become available.
For more information about BREW
capabilities and application pricing, contact
your service provider.
Access Help for Downloads
From Downloads, select Help to get
instructions on how to run and manage your
downloaded applications.
Download an Application
1. From Downloads, select Mobileshop >
Catalog. When a connection is made, a list
of application types appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
How does BREW Work?
60
13 Get Help
•
•
The name of your service provider.
The actual error message or problem you
are experiencing.
The steps you took to reproduce the
problem.
Customer Support
Your service provider’s customer support
department may be accessible directly from
your phone when you dial a number, such as
*611 (check with your service provider). They
can answer questions about your phone, phone
bill, call coverage area, and specific features
available to you, such as call forwarding or
voicemail. For questions about the phone
features, refer to the materials provided with
your phone, or visit
•
•
The phone’s mobile equipment identifier
(MEID).
Note: From Phone Info, select Build Info
.
Scroll down to MEID. The 18-digit number is
the MEID number. If your phone uses an
electronic service number (ESN), ESN
replaces MEID
.
.
For additional questions, you may contact the
Kyocera Communications Inc. Customer Care
Center in any of the following ways:
Qualified Service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
•
•
•
Email: [email protected].
Phone (U. S. and Canada): 1-800-349-4478
or 1-858-882-2000 (press 2 for Product
Information).
Phone Accessories
To shop for phone accessories, visit
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
kyocera.superiorcommunications.com
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
62
Consumer Limited Warranty
Kyocera Communications Inc. (“KYOCERA”)
offers you a limited warranty that the enclosed
product or products (the “Product”) will be free
from defects in material and workmanship for
a period that expires one year from the date of
sale of the Product to you, provided that you
are the original end-user purchaser of the
Product and provided that your purchase was
made from an authorized supplier. Transfer or
resale of a Product will automatically terminate
warranty coverage with respect to that Product.
This limited warranty is not transferable to any
third party, including but not limited to any
subsequent purchaser or owner of the Product.
KYOCERA shall, at its sole and absolute
discretion, either repair or replace a Product
(which unit may use refurbished parts of
similar quality and functionality) if found by
KYOCERA to be defective in material or
workmanship, or if KYOCERA determines
that it is unable to repair or replace such
Product, KYOCERA shall refund the purchase
price for such Product, provided that the
subject Product (i) is returned, with
This limited warranty does not cover and is
void with respect to the following: (i) any
Product which has been improperly installed,
repaired, maintained or modified; (ii) any
Product which has been subjected to misuse
(including any Product used in conjunction
with hardware electrically or mechanically
incompatible or used with accessories not
approved by KYOCERA), abuse, accident,
physical damage, abnormal operation,
improper handling, neglect, exposure to fire,
water or excessive moisture or dampness or
extreme changes in climate or temperature;
(iii) any Product operated outside published
maximum ratings; (iv) cosmetic damage; (v)
any Product on which warranty stickers or
Product serial numbers have been removed,
altered, or rendered illegible; (vi) cost of
installation, removal or reinstallation; (vii)
signal reception problems (unless caused by
defects in material and workmanship); (viii)
damage the result of fire, flood, acts of God or
other acts which are not the fault of
KYOCERA and which the Product is not
specified to tolerate, including damage caused
by mishandling, shipping and blown fuses; (ix)
consumable (such as fuses); or (x) any Product
which has been opened, repaired, modified or
altered by anyone other than KYOCERA or a
KYOCERA authorized service center.
transportation prepaid, to a KYOCERA
authorized service center within the one year
warranty period, and (ii) is accompanied by a
proof of purchase in the form of a bill of sale or
receipted invoice which evidences that the
subject Product is within the one year warranty
period (“Proof of Purchase”). After the one
year warranty period, you must pay all
shipping, parts and labor charges.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
63
USE ONLY KYOCERA APPROVED
ACCESSORIES WITH KYOCERA
PRODUCTS ARE APPROVED AND
ACCEPTED BY YOU “AS IS”.
PHONES. USE OF ANY UNAUTHORIZED
ACCESSORIES MAY BE DANGEROUS
AND WILL INVALIDATE THE PHONE
WARRANTY IF SAID ACCESSORIES
CAUSE DAMAGE OR A DEFECT TO THE
PHONE.
KYOCERA MAKES NO OTHER
WARRANTIES, REPRESENTATIONS OR
CONDITIONS OF ANY KIND, ORAL OR
VERBAL, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, WITH
RESPECT TO THE PRODUCTS,
KYOCERA SPECIFICALLY DISCLAIMS
LIABILITY FOR ANY AND ALL DIRECT,
INDIRECT, SPECIAL, GENERAL,
INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR.
A PARTICULAR PURPOSE OR AGAINST
INFRINGEMENT OR ANY IMPLIED
WARRANTY OR CONDITION ARISING
OUT OF TRADE USAGE OR OUT OF A
COURSE OF DEALING OR COURSE OF
PERFORMANCE.
NO DEALER, DISTRIBUTOR, AGENT OR
EMPLOYEE IS AUTHORIZED TO MAKE
ANY MODIFICATION OR ADDITION TO
THIS WARRANTY.
Some jurisdictions do not allow the exclusion
or limitation of incidental or consequential
damages, or allow limitations on how long an
implied warranty lasts, so the above limitations
or exclusions may not apply to you. This
limited warranty gives you specific legal
rights, and you may also have other rights
which vary from jurisdiction to jurisdiction.
For warranty service information, please call
the following telephone number from
anywhere in the continental United States and
Canada:
PUNITIVE, EXEMPLARY, AGGRAVATED,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES, EVEN IF ADVISED OF THE
POSSIBILITY THEREOF, WHETHER
FORESEEABLE OR UNFORESEEABLE OF
ANY KIND WHATSOEVER, INCLUDING
BUT NOT LIMITED TO LOSS OF PROFITS,
UNANTICIPATED BENEFITS OR
REVENUE, ANTICIPATED PROFITS
ARISING OUT OF USE OF OR INABILITY
TO USE ANY PRODUCT (FOR EXAMPLE,
WASTED AIRTIME CHARGES DUE TO
THE MALFUNCTION OF A PRODUCT) OR
CONTRIBUTION OR INDEMNITY IN
RESPECT OF ANY CLAIM RELATED TO A
PRODUCT.
REPAIR OR REPLACEMENT OF A
DEFECTIVE PRODUCT OR REFUND OF
THE PURCHASE PRICE RELATING TO A
DEFECTIVE PRODUCT, AS PROVIDED
UNDER THIS WARRANTY, ARE YOUR
SOLE AND EXCLUSIVE REMEDIES FOR
BREACH OF THE LIMITED WARRANTY,
AND SUBJECT TO THIS WARRANTY, THE
1-800-349-4478 or 858-882-1401.
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Accessories
64
Index
Numerics
A
alerts
browser
C
applications
call lists
B
battery
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
65
call timers
calls
D
E
F
G
games
groups
Download from Www.Somanuals.com. All Manuals Search And Download.
66
M
media files
H
headsets
hold calls
menus
I
images
messages
K
keyguard
keypad
L
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
67
Q
R
ringers
roaming
N
notifications
S
O
P
pages
phone
Download from Www.Somanuals.com. All Manuals Search And Download.
68
settings
V
sounds
voicemail
speed dial list
volume
T
W
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
69
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
71
Kyocera Communications Inc.
82-L2707-2EN, Rev. 001
Download from Www.Somanuals.com. All Manuals Search And Download.
|