Torino
user guide
Download from Www.Somanuals.com. All Manuals Search And Download.
designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
could void the warranty and user’s authority to operate the
equipment.
Optimize your Phone’s Performance
Use the instructions in this guide to learn how to optimize the
performance and life of your phone and battery.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model.
Air Bags
If you have an air bag, DO NOT place installed or portable
phone equipment or other objects over the air bag or in the air
bag deployment area. If equipment is not properly installed, you
and your passengers risk serious injury.
Body-worn measurements differ among phone models,
depending upon availability of accessories and FCC
requirements. While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.
Medical devices
Pacemakers—Warning to pacemaker wearers: Wireless
phones, when in the ‘on’ position, have been shown to interfere
with pacemakers. The phone should be kept at least six (6)
inches away from the pacemaker to reduce risk.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
the FCC ID: OVF-K5302.
The Health Industry Manufacturers Association and the wireless
technology research community recommend that you follow
these guidelines to minimize the potential for interference.
•
Always keep the phone at least six inches (15 centimeters)
away from your pacemaker when the phone is turned on.
Additional information on SAR can be found on the Cellular
Telecommunications and Internet Association (CTIA) web-site at
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
www.ctia.org
.
If you have any reason to suspect that interference is taking
place, turn off your phone immediately.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to
account for any variations in measurements.
Hearing aids—Some digital wireless phones may interfere with
hearing aids. In the event of such interference, you may want to
call the customer service line to discuss alternatives.
Bluetooth® Certification
Other medical devices—If you use any other personal medical
device, consult the manufacturer of the device to determine if it
is adequately shielded from external RF energy. Your physician
may be able to help you obtain this information.
For information about S2300 Bluetooth Certification, visit the
Bluetooth Qualification Program Web site at
.
In health care facilities—Turn your phone off in health care
facilities when instructed. Hospitals and health care facilities
may be using equipment that is sensitive to external RF energy.
Caution
The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
3
Potentially unsafe areas
Keep your phone dry
Posted facilities—Turn your phone off in any facility when
posted notices require you to do so.
Keep the phone dry. Damage can result if the phone gets wet.
Water damage is not covered under warranty.
Aircraft—FCC regulations prohibit using your phone on a plane
that is in the air. Turn your phone off or switch it to Airplane
Mode before boarding aircraft.
Resetting the phone
If the screen seems frozen and the keypad does not respond to
key presses, reset the phone by completing the following steps:
Vehicles—RF signals may affect improperly installed or
inadequately shielded electronic systems in motor vehicles.
Check with the manufacturer of the device to determine if it is
adequately shielded from external RF energy.
1. Remove the battery cover.
2. Remove and replace the battery.
If the problem persists, return the phone to the dealer for
service.
Blasting areas—Turn off your phone where blasting is in
progress. Observe restrictions, and follow any regulations or
rules.
Accessories
Use only Kyocera-approved accessories with Kyocera phones.
Use of any unauthorized accessories may be dangerous and will
void the phone warranty if said accessories cause damage or a
defect to the phone.
Potentially explosive atmospheres—Turn off your phone
when you are in any area with a potentially explosive
atmosphere. Obey all signs and instructions. Sparks in such
areas could cause an explosion or fire, resulting in bodily injury
or death. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on,
it receives and sends out RF energy. Your service provider’s
network controls the power of the RF signal. This power level
can range from 0.006 to 0.6 watts.
They include:
•
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or chemicals
vehicles using liquefied petroleum gas, such as propane or
butane
In August 1996, the U.S. Federal Communications Commission
(FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. These guidelines are consistent with
the safety standards previously set by both U.S. and
international standards bodies in the following reports:
•
•
areas where the air contains chemicals or particles such as
grain, dust, or metal powders
any other area where you would normally be advised to turn
off your vehicle engine
•
•
ANSI C95.1 (American National Standards Institute, 1992)
NCRP Report 86 (National Council on Radiation Protection
and Measurements, 1986)
Use with care
•
ICNIRP (International Commission on Non-Ionizing
Radiation Protection, 1996)
Use only in normal position (to ear). Avoid dropping, hitting,
bending, or sitting on the phone.
Your phone complies with the standards set by these reports
and the FCC guidelines.
Avoid magnetic environments
Keep the phone away from magnets which can cause improper
functioning of the phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
For more information about hearing aid compatibility, visit the
FCC’s Consumer & Governmental Affairs Bureau Web site at
E911 mandates
Where service is available, this phone complies with the Phase I
and Phase II E911 Mandates issued by the FCC.
.
Hearing Aid Compatibility (HAC) with Mobile
Phones
Kyocera Communications Inc.
Some mobile phones and hearing devices (hearing aids and
cochlear implants), when used together, result in buzzing,
humming, or whining noises detected by the user.
To purchase accessories, visit
kyocera.superiorcommunications.com
Some hearing devices are more immune than others to this
interference noise, and phones also vary in the amount of
interference they generate.
The wireless telephone industry has developed ratings for some
of their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not
all phones have been rated.
Phones that are rated have the rating on their box or a label on
the box. The ratings are not guarantees and results will vary
depending on the user’s hearing device and hearing loss. If your
hearing device happens to be vulnerable to interference, you
may not be able to use a rated phone successfully. Trying out
the phone with your hearing device is the best way to evaluate it
for your personal needs.
M-Ratings—Phones rated M3 or M4 meet FCC requirements
and are likely to generate less interference to hearing devices
than phones that are not labeled. M4 is the better/higher of the
two ratings.
T-Ratings—Phones rated T3 or T4 meet FCC requirements and
are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type
of interference. Your hearing device manufacturer or hearing
health professional may help you choose the proper rating for
your mobile phone. The more immune your hearing aid is, the
less likely you are to experience interference noise from mobile
phones.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Table of Contents
6
Messaging Menu . . . . . . . . . . . . . . . . . . . .35
Manage Web Alerts . . . . . . . . . . . . . . . . . .44
4
Recent Calls . . . . . . . . . . . . . . . . . . . . . . 24
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 28
7
8
Change Scheduler Settings. . . . . . . . . . . . .50
5
9
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . 74
Network. . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Convenience . . . . . . . . . . . . . . . . . . . . . . . 71
Download from Www.Somanuals.com. All Manuals Search And Download.
8
1
Get Started
Charge the Battery
1. Open the Micro-USB
jack cover on the top of
the phone. Connect the
AC adapter to the
Micro-USB jack.
2. Plug the adapter into a
wall outlet.
Phone Battery
Install the Battery
1. With the back of the
phone facing you, press
on the back cover and
slide it to the bottom of
the phone.
2. Lift the back cover from
the bottom to remove.
3. Place the battery in the
battery casing. The metal
contacts of the battery
must touch the metal
contacts of the battery
casing.
The battery icon in the upper-right corner of
the screen tells you whether the phone is:
–
–
–
Charging (the icon is animated)
Partially charged
Fully charged
!
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note: Before removing the battery, make sure
the phone is powered off.
4. Align the back cover
side tabs with the slots
on each side of the
!
phone.
5. Slide the back cover to
the top of the phone until
it is securely in place.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
9
•
•
Replace the battery only with another
qualified battery. Use of an unqualified
battery may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a replacement
battery is compatible, contact customer
support.
Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
Battery Safety Guidelines
•
•
Do not disassemble or open the battery.
Do not crush, bend, deform, puncture, or
shred the battery.
•
•
Do not attempt to insert foreign objects into
the battery.
Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
•
•
Supervise all battery usage by children.
Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
•
Always keep the battery between 15 °C and
25 °C (59 °F and 77 °F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a
cooking surface, iron, or radiator.
Never use any damaged battery.
Only use the battery for its intended phone.
Only use the battery with a qualified
charger. Use of an unqualified battery
charger may present a risk of fire,
explosion, leakage, or other hazard. If you
are unsure about whether a charger is
qualified, contact customer support.
Do not short-circuit the battery or allow
metallic conductive objects—such as keys,
coins, or jewelry—to contact the battery’s
terminals.
•
•
•
•
Improper battery use may result in a fire,
explosion, or other hazard.
Common Causes of Battery Drain
•
•
•
•
Playing games or using the Web.
Taking pictures with the flash on.
Keeping backlighting on.
Operating when far away from a base
station or cell site.
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
High earpiece and ringer volume settings.
Repeating sound, vibration, or lighted
alerts.
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Battery
10
Phone Overview
Get to Know Your Phone
The following shows the phone’s keypad.
1. Earpiece speaker.
1
2
2. Home screen.
3. Left softkey selects items that appear on the lower left of
the display. At the home screen, you can select Menu
.
4. Navigation key scrolls through lists and text entry fields
and accesses the following shortcuts from the home
screen:
3
5
11
13
4
6
12
14
–
Scroll left or right to highlight an icon on the
application bar.
_
_
+
O
(
T
)
Y
@
P
#
1
W
2
E
3
R
Q
U
I
‘
/
G
:
;
$
K
!
L
4
S
5
D
6
F
*
H
J
?
A
–
–
Scroll up to go to Contacts > View All
.
%
V
=
B
&
N
7
Z
8
X
9
C
‛
‛‛
.
7
Fn
M
Scroll down to go to Messaging
.
0
CAP
Space
SYM
8
15
S2300
5. Speakerphone key activates the speakerphone and
answers calls.
6. Send key starts or answers a call. Press once to display
the recent calls list or twice to redial the last number
dialed. Press and hold to activate voice commands.
9
10
7. Function key enables you to type symbol characters or toggle between letters and symbols.
Press the Function key once to change the input mode for the next character; press twice
(within 2 seconds) to toggle between letters and symbols.
8. Shift key enables you to press once to change case mode or press twice to toggle between case
modes.
9. Number keypad for entering numbers.
10. QWERTY keypad for entering numbers, letters, or symbols.
11. Right softkey selects items that appear on the lower right of the display. At the home screen,
you can select Contacts
.
12. OK key selects a menu item or option. At the home screen, you go to the main menu when you
press the OK key.
13. Back key returns you to the previous screen.
14. End key turns the phone on and off, ends a call or browser session, and returns you to the
home screen.
15. Enter key generates a carriage return in text entry.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
11
The following shows the back of the phone.
1. Jack for a hands-free headset (sold separately).
2. Camera lens.
1
2
4
5
3. Accessory eyelet (for optional straps and lanyards).
4. Jack for AC adapter (included) and Micro-USB cable (sold
separately).
3
6
7
5. External speaker.
6. Camera key activates camera mode. Press and hold the
Camera key to activate camera mode.
7. Volume key raises or lowers ringer volume.
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
Qualcomm
3G CDMA
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Overview
12
MetroPCS Applications
At the home screen, your phone displays an application bar. Scroll left or right with the
Navigation key to highlight an application. Press the OK key to launch an application. Your
phone has the following application shortcuts available:
MetroWEB
Metro411
Launch the web browser.
Find a phone number.
Find directions using GPS.
Check the news.
MetroNavigator
Pocket Express
Loopt
Contact friends using GPS.
Back up your data.
MetroBACKUP
Mobile Banking
Mobile IM
Check your bank accounts.
Send instant messages.
Send email messages.
Check your account status.
Download an application.
mail@metro
MyMetro
@metro
Note: Please check with your service provider regarding the pricing and availability of these
applications.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
13
Screen Icons
These icons may appear on your phone’s screen.
(blinking) The phone is receiving
high-speed data.
The phone is operating in IS2000 (1X)
digital mode.
(blinking) The phone is sending high-speed
data.
The phone is in airplane mode.
The alarm clock is set.
The phone is operating in IS95 digital
mode.
The phone is set to auto answer.
Content is DRM protected.
The battery is fully charged. The more black
bars, the greater the charge.
Position location is set to emergency
services only.
The phone is transferring data with
Bluetooth.
Position location is set to your service
provider and to emergency services.
A headset or other hands free device is in
operation.
The phone has a high speed data
connection.
A headset or other hands free device is
transferring data.
A call is in progress.
Bluetooth wireless technology is disabled
(Off).
The phone is set to light up instead of ring.
New message.
Bluetooth wireless technology is enabled
(On).
New email message.
The phone is in camera mode.
The battery will not charge.
New email and instant message.
New instant message.
New photo and text message.
New photo and voice message.
New photo message.
Data service is available and active on your
phone. Check with your service provider for
availability.
Data service is available, but the phone is
dormant.
New photo, voice and text message.
New text message.
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Overview
14
New voice and text message.
New voice message.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its home
service area.
The phone is in privacy mode or is
accessing a secure Web site.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate
a weaker signal.
The speaker phone is turned on.
A T-coil hearing aid is in operation.
A traffic channel is active.
The phone is in TTY device mode.
The phone is set to vibrate or to vibrate and
then ring.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
15
Main Menu
From the home screen, select Menu to access the main menu.
Idle State >
Menu
Level 1 >
Level 2
Recent Calls
Access these options: All
Erase Call List Call Timers, and Kilobyte Counter.
,
Incoming
,
Outgoing
,
Missed
,
,
Contacts
Access these options: View All
Groups Speed Dial List Voice Dial List
Contacts Count
,
Add New
,
Metro411
,
View
,
,
,
Delete All, and
.
Messaging
Access these options: Inbox
Email Mobile IM
Outbox Saved Msgs
and Message Count
,
New Text Msg
,
New Pic Msg
Sent Msgs
Erase Msgs
,
,
,
Voicemail
,
Web Alerts
,
,
,
,
Drafts
,
Msg Settings
,
,
.
Scheduler
Schedule an appointment.
Download an application.
Browse the web.
@metro
MetroWEB
Camera
Take a picture.
Media Gallery
Alarm Clock
Bluetooth
Access these options: Images
,
,
Tones, and Delete All.
Set an alarm.
Access these options: On/Off
My Devices, and Settings.
Tools & Games
Access these options: Brick Attack
Scheduler Alarm Clock Tip Calculator
Timer Stopwatch
,
Voice Memo
,
,
,
,
Calculator
,
,
,
Memopad, and World Clock
.
Settings
Access these options: Bluetooth
Convenience Voice Features Accessories
Security Phone Info, and Memory Status
,
Sounds
,
Display
,
,
,
,
Network,
,
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
16
Guide Conventions
In this guide, the following conventions are
used when describing phone features.
Select means to press the Left softkey, Right
softkey or OK key to select an item seen on the
display. For example, “Select Menu” tells you
to physically press the left softkey to choose
Menu from the display.
Press means to press a phone key. For
example, “Press the Send key to make a phone
call” tells you to physically press the Send key
on your phone.
Scroll means to use the Navigation key to
move through a list on the display. For
example, “Scroll through your contacts list to
choose a contact” means to physically press the
Navigation key up or down to scroll through
the list on the display.
>
(greater than symbol) tells you to select an
option from a menu or list. For example,
Menu Settings” means to:
“
>
1. Press the left softkey to select Menu
.
2. Scroll to the Settings option.
3. Press the OK key to select Settings
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
17
2
Call Features
This section describes the basic features related
to calls.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
Power Phone Up
•
To turn your phone on, press and hold the
End key until the phone display lights up.
To turn your phone off, press and hold the
End key until the phone plays a short
musical sound and turns off.
Redial a Number
1. Press the Send key to open your call
history.
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called,
received or missed, press the Send key twice.
•
Make Phone Calls
Make sure you are in an area where a signal
can be received. Look for the signal strength
icon on the home screen. The more bars, the
stronger the signal. If there are no bars, move
to where the signal strength is better.
When the phone has been idle for a time, it
cycles into power save mode. Press any key to
return to normal operating mode.
Answer Phone Calls
When a call comes in, the phone rings,
vibrates, or lights up. The phone number of the
caller also appears if it is not restricted. If the
number is stored in your contacts list, the
contact’s name appears. There are several ways
you can answer a phone call.
There are several ways you can make a phone
call.
Answer Using Earpiece
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Press the Send key.
Answer Using Speakerphone
Press the Speakerphone key.
Call Using a Contact
1. From View All, highlight a contact.
2. Press the Send key.
End Phone Calls
Press the End key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Phone Up
18
Activate Voice Dialing
Use Speed Dialing
1. Press and hold the Send key.
2. Follow the prompts.
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
location to it. See “Assign Speed Dials to
Contacts” on page 31.
Volume Control
Adjust Volume during a Call
Press the Volume key up or down to adjust the
earpiece volume during a call.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
location.
2. Press the Send key.
Use the Speakerphone
Your phone has a built-in speakerphone.
Emergency Services
•
To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
To turn off the speakerphone, press the
Speakerphone key again.
Call Emergency Services
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you
back, if necessary. To make or receive regular
calls after dialing the code, you must exit this
mode.
•
Note: If you press the Speakerphone key
during an incoming call, you will answer the
call.
To dial an emergency code:
1. Enter the 3-digit emergency code.
2. Press the Send key.
Note: Regardless of the 3-digit emergency
code (911, 111, 999, 000, etc.), your phone
operates as described above.
Silence an Incoming Call
•
To silence the phone without answering the
call, press the Back key or press the
Volume key up or down.
•
To silence the phone and answer the call,
press the Back key or press the Volume
key up or down and then press the Send
key.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
19
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit
.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see “Set Location Information” on
page 75.
Download from Www.Somanuals.com. All Manuals Search And Download.
Emergency Services
20
3
Text Entry
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
The
icon indicates you are in Numbers
Only mode. Press the Function key twice
quickly (within two seconds) to change modes.
Press the Function key once to change the
mode for the next character only.
Note: When entering a phone number, press
the Function key and the key for the letter
simultaneously to enter letters.
Text Entry Modes
The text entry screen has the following
features:
1. Characters remaining
that you can type.
Allowed message
length can vary
depending on your
service.
Enter Letters with QWERTY Keypad
From the text entry field, select Options >
Normal Alpha to enter letters. You can enter
text in the following ways:
2. Text entry fields.
•
To enter a letter, press the key for the letter.
Press the Shift key to change the case of a
letter. Press the Shift key twice quickly
(within two seconds) to change case modes.
Press the Space key to enter a space.
To enter a number or symbol, press the
Function key and then the key for the
number or symbol.
3. Current capitalization setting.
4. Current text entry mode.
Note: The entry mode will default depending
on the task you are doing. For example, when
entering a phone number, you are in Numbers
Only mode. When entering a name for a
contact, you are in Normal Alpha mode.
•
The
icon indicates that you are in Normal
Enter Numbers with QWERTY Keypad
From the text entry field, select Options >
Numbers Only and press the number key to
enter your number.
Alpha mode. Press the Function key twice
quickly (within two seconds) to change modes.
Press the Function key once to change the
mode for the next character only.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
21
Rapid Entry with QWERTY Keypad
When you press a series of keys using Rapid
entry, your phone checks its dictionary and
guesses at the word you are trying to spell.
From a text entry field, select Options >
Rapid Entry to speed up word completion. To
enter words, press a key once. For example, to
enter the word “Wyoming” press the w > y > o
keys and then the OK key.
The
icon indicates you are in Rapid Entry
mode. To change case mode, press the Shift
key.
Enter Symbols with QWERTY Keypad
While entering text in Normal Alpha mode,
press the Function key and then the key for the
number or symbol. To access more symbols,
do one of the following:
•
Press the Symbol key and then the key for
the symbol.
•
Select Options > Add Symbols and then
the key for the symbol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Entry Modes
22
Text Entry Quick Reference
This table gives instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use Normal Alpha mode and press a key until you
see the letter your want.
Enter a number
Enter a symbol
Use Numbers Only mode and press a key.
Use Normal Alpha mode and press the key until
1
you see the symbol you want.
Enter a space
Press the # Q key.
Erase a character
Press the Back key.
Erase all characters
Move the cursor right or left
Move the cursor up or down
Change input mode
Change case mode
Press and hold the Back key.
Scroll left or right.
Scroll up or down.
Press and hold the Function key.
Press the Function key.
Capitalize any letter
In Normal Alpha mode, press the Function key.
Choose uppercase.
Lowercase any letter
In Normal Alpha mode, press the Function key.
Choose lowercase.
Initial caps
In Normal Alpha mode, press the Function key.
Choose sentence case.
Select options on the bottom of the screen
Press the appropriate left or right softkey.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
23
4
Recent Calls
Recent Calls Menu
Select Recent Calls from the main menu to access the following functions:
Level 1 >
Level 2 >
All
Level 3
Recent Calls
See a list of all voice calls.
Incoming
Outgoing
Missed
See a list of all voice calls you have received.
See a list of all voice calls you have made.
See a list of all voice calls you have missed.
Erase Call List
Call Timers
Access these options: All
,
Incoming
,
Outgoing, and Missed
.
Access these options: All Voice Calls
,
All Data Calls, and
Life
.
Kilobyte Counter
See how much data you have sent and received.
Return a Received Call
Work with Call Lists
Return Any Call
1. From All, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls made and received.
1. From Incoming, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls received.
Return an Outgoing Call
1. From Outgoing, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls you have made.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recent Calls Menu
24
Send Text Message from Call List
1. At a call list, highlight a contact.
Return a Missed Call
1. From Missed, highlight a number.
2. Press the Send key to call the number or
select Options to access more features.
This list contains all calls you received, but did
not answer.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
.
Send Multimedia Message from Call List
1. At a call list, highlight a contact.
Manage a Missed Call Alert
When you have missed a call, “Missed Call”
appears on your screen. You can do one of the
following:
2. Select Options > Send Pic Msg
3. Complete your multimedia message and
select Send
.
.
•
•
To clear the screen, select OK.
To view the call details, select Calls and
press the OK key.
Erase Call List Records
•
To return the call, select Calls and press the
Send key.
Erase a Single Record
1. At a call list, highlight a contact.
2. Select Options > Erase Record > Yes
.
Call List Options
Erase a Call List
Save Number from Call List
From Erase Call List, select a call list to erase
records from. For example to erase all records
from the incoming call list, select Incoming >
1. At a call list, highlight a number.
2. Select Options > Save
.
3. Select Save New Contact to create a new
contact or Add to Existing to add a number
to an existing contact.
Yes
.
Erase All Call Lists
From Erase Call List, select All > Yes to erase
all records from all call lists.
View Contact from Call List
1. At a call list, highlight a contact.
2. Select Options > View to see the contact
details screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
25
View Outgoing Data Timer
Work with Call Timers
View Last Call Timer
Select Last Voice Call to view the total call
time of your last call made or received. Select
Done when finished.
From All Data Calls, select Total Sent to view
the number of calls and the total call time.
Select Done when finished.
This timer tracks all calls made since you last
reset the timer. To reset this timer to zero,
select Reset > Yes
.
View Outgoing Calls Timer
From All Voice Calls, select Total Dialed to
view the number of calls and the total call time.
Select Done when finished.
View Incoming Data Timer
From All Data Calls, select Total Received to
view the number of calls and the total call time.
Select Done when finished.
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
This timer tracks all calls made since you last
reset the timer. To reset this timer to zero,
select Reset > Yes
.
select Reset > Yes
.
View Incoming Calls Timer
From All Voice Calls, select Total Received to
view the number of calls and the total call time.
Select Done when finished.
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
View All Data Timer
From All Data Calls, select All Calls to view
the amount of data sent and received by the
phone since the last reset. Select Done when
finished.
select Reset > Yes
.
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
View All Calls Timer
From All Voice Calls, select All Calls to view
the number of calls and the total call time.
Select Done when finished.
This timer tracks all calls received since you
last reset the timer. To reset this timer to zero,
select Reset > Yes
.
View Calls Life Timer
From Life, select All Voice Calls to view the
number of calls and the total call time. Select
Done when finished.
This timer tracks all calls made and received
for life of the phone and cannot be reset.
select Reset > Yes
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Work with Call Timers
26
View Data Life Timer
From Life, select All Data Calls to view the
number of calls and the total call time. Select
Done when finished.
This timer tracks data sent and received for life
of the phone and cannot be reset.
View Data Counter
Select Kilobyte Counter to view the amount
of kilobytes sent during data calls. Select Done
when finished.
This timer tracks kilobytes sent during data
calls made, data calls received, and for the life
of the phone. To reset the data counter to zero,
select Options > Reset > Yes
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
27
5
Contacts
Use Contacts to store information about a person or company.
Contacts Menu
Select Contacts from the main menu to access the following functions:
Level 1 >
Contacts
Level 2 >
Level 3
View All
Access your existing contacts list.
Add a new entry to your contacts list.
Find a phone a number.
Add New
Metro411
View Groups
Speed Dial List
Voice Dial List
Delete All
View your groups of contacts.
View your contacts assigned with speed dials.
View your contacts assigned with voice dials.
Access these options: Contacts Only
,
Groups Only, and
Delete All
.
Contacts Count
Check how much contact space you have used.
Launch Metro411
From Contacts, select Metro411 to access the
Metro411 directory. You may need download
and install Metro411. For more information on
the availability of Metro411, contact
metroPCS.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contacts Menu
28
Access Contacts
Add Contacts
Access Contacts List
Add Contacts from Home Screen
1. From the home screen, enter a phone
number to save (include the area code).
1. From View All, enter the first letter of your
desired contact and scroll to highlight it.
2. Do one of the following:
2. Select Save > Save New Contact
.
–
–
Press the Send key to call the contact.
Press the OK key to view the contact’s
details.
Select New to create a new contact.
Select Options to access more
functions.
3. Enter a name for the contact.
4. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
–
–
5. When done, select Save
.
View Contact Details
Add Contacts from Contacts Menu
1. From Add New, enter a name for the
contact. Scroll down to the next field when
done.
1. From View All, select a contact.
2. At the contact details screen, highlight a
number, address or note.
3. Select the detail you want to view. For
example, to view a phone number, select
2. Enter a primary number for the contact.
3. Enter additional phone numbers, email
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
Options > View Number
.
Use Frequent List
With Frequent List enabled, you can view 15
of your most frequently called contacts. See
“Enable Frequent List” on page 72.
4. When done, select Save
.
Add a Code or Extension
When saving the phone number of an
automated service, you may include a pause
for dialing an extension.
1. From the home screen, enter a phone
number.
Use Fast Find
With Fast Find enabled, you can press one or
two keys to view closer matches in your
contacts list. See “Call Contact using Fast
Find” on page 72.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
29
2. Select Options and a type of pause:
3. Select Options > Send Pic Msg
4. Complete your multimedia message and
select Send
.
–
Time Pause causes the phone to stop
dialing for two seconds.
.
–
Hard Pause causes the phone to wait
until you select Release while making
the call.
Send a Contact vCard
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
3. Enter the remaining numbers and select
Save > Save New Contact
4. Complete the contact information and
select Save
.
3. Select Options > Send as vCard > via
MMS (to attach to a multimedia message),
via Bluetooth (to send to a
.
Bluetooth-enabled device), or To Printer
(to print on a Bluetooth-enabled device).
4. Complete the appropriate task to send the
contact information.
Note: If your phone has no Bluetooth feature,
you may send the contact information with a
message only.
Use Contacts
Call Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
3. Select Options > Call
.
Send a Text Message to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number or email address.
Customize Contacts
Edit Contact Details
1. From View All, select a contact.
3. Select Options > Send Text Msg
4. Complete your text message and select
Send
.
2. At the contact details screen, select Edit.
3. Enter additional phone numbers, email
.
addresses, and other contact details. (Scroll
up or down to move through the contact
fields.)
Send a Multimedia Message to
Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number or email address.
4. When done, select Save
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use Contacts
30
Assign Number Types
1. From View All, select a contact.
2. At the contact details screen, select Edit
Add a Prefix to Phone Numbers
Use Prepend to add a prefix, such as an area
code, to a phone number:
.
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
3. Select Options > Prepend to enter the
prefix at the beginning of the number.
3. Press down twice to scroll to the number
type dropdown and press the OK key.
4. Select a number type. The appropriate icon
appears next to the number in your contacts
list.
5. Select Save
.
4. Select Save.
Assign Ringers to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
Assign Speed Dials to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
3. Select Options > Ringer > Assign Ringer
and a ringer from the list. (Scroll to play the
ringers.)
3. Select Options > Add Speed Dial.
4. Select a location from the list to assign the
speed dial number.
Assign Message Tones to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. (Scroll to
play the ringers.)
Change Primary Numbers
When a contact has more than one number, the
first number becomes the primary number by
default. To change the contact’s primary
number:
1. From View All, select a contact.
2. At the contact details screen, highlight a
number.
Assign Pictures to Contacts
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
3. Select Options > Picture > Assign Picture
to assign a picture.
3. Select Options > Primary Number > Yes
.
Add Contacts to Groups
1. From View All, select a contact.
2. At the contact details screen, highlight a
number or email address.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
31
3. Select Options > Add to Group
.
Erase All Contacts
4. Select groups from the list provided. A
checkmark appears next to each selection.
You can also remove a checkmark.
From Delete All, select Contacts Only > Yes
> Yes to erase all your contacts.
Note: You cannot recover deleted information.
5. When finished, select Done
.
Erase All Contacts and Groups
From Delete All, select Delete All > Yes > Yes
to erase all your contacts and groups.
Visit Web Addresses
1. From View All, select a contact.
2. At the contact details screen, highlight a
Web address.
Note: You cannot recover deleted information.
3. Select Options > Launch Web
.
Contact Groups
You can assign your contacts to groups. Your
phone comes with default groups. You can also
create your own groups.
Erase Contacts
Erase Contact Details
1. From View All, select a contact.
2. At the contact details screen, highlight a
number, address or note.
3. Select your desired erase option and then
select Yes. For example, to erase an email
address, select Options > Erase Address >
View Groups
1. Select View Groups to view your
preloaded groups, followed by the custom
groups you have created.
2. Highlight a group and do one of the
following:
Yes
.
–
Press the OK key to view the group
details.
Select New to create a new group.
Select Options to access more
functions.
Erase an Entire Contact
–
–
1. From View All, select a contact.
2. At the contact details screen, highlight the
contact name.
Create a New Group
1. From View Groups, select New
2. Enter a name for the group and select Next
3. Select Options > Erase Contact > Yes to
erase the entire contact.
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Erase Contacts
32
3. Select contacts from the list provided. A
checkmark appears next to each selection.
You can also remove checkmarks.
Assign Ringers to Groups
1. From View Groups, select a group.
2. At the group details screen, scroll to the
group name.
4. When finished, select Done
.
Your new group appears the next time you
view your groups list.
3. Select Options > Ringer > Assign Ringer
and a ringer from the list. (Scroll to play the
ringers.)
Send Text Messages to Groups
1. From View Groups, highlight a group.
Assign Message Tones to Groups
1. From View Groups, select a group.
2. At the group details screen, scroll to the
group name.
2. Select Options > Send Text Msg
3. Complete your text message and select
Send
.
.
3. Select Options > Msg Tone > Assign Msg
Tone and a ringer from the list. (Scroll to
play the ringers.)
Send Multimedia Messages to Groups
1. From View Groups list, highlight a group.
2. Select Options > Send Pic Msg
3. Complete your multimedia message and
select Send
.
Assign Pictures to Groups
1. From View Groups, select a group you
have created.
2. At the group details screen, scroll to the
group name.
.
Add or Remove Contacts from Groups
1. From View Groups, highlight a group.
2. Select Options > Edit
.
3. Select Options > Picture > Assign Picture
to assign a picture.
3. If you are modifying a group you created,
select Next. Otherwise, go to the next step.
4. Select contacts from the list provided. A
checkmark appears next to each contact in
the group. Press the OK key to add or
remove checkmarks.
Send a Group vCard
1. At the View Groups list, highlight a group.
2. Select Options > Send > via Bluetooth
.
3. Complete the appropriate task to send the
group information.
5. When finished, select Done
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
33
Erase a Group
Voice Dial List
Enable Voice Dial Tags
1. From View Groups, highlight a group.
2. Select Options > Erase > Yes
.
Your phone creates a voice dial tag for each
contact that has a name field which is not blank
or a name that is more than five syllables. You
can enable or disable the voice dial tags
associated with your contacts.
1. From Voice Dial List, press the OK key to
add or remove checkmarks. A checkmark
appears next to each enabled voice dial.
(Scroll through the list to play the voice
dial tags.)
Erase All Groups
From Delete All, select Groups Only > Yes >
Yes to erase all your groups.
Note: You cannot recover deleted information
or erase preloaded groups.
Speed Dial List
Assign Speed Dial Numbers
1. From Speed Dial List, highlight an
unassigned number (marked as empty).
2. When done, select Save
.
Search Contact Voice
You can use voice commands to find a contact
in your voice dial list. For more information,
2. Select Assign
.
3. At the contacts list, select a contact.
4. At the contact details screen, select a phone
number.
Clear Speed Dial Numbers
1. From Speed Dial List, highlight an
assigned number.
Check Contacts
Select Contacts Count to check how many
contacts you have stored.
2. Select Erase > Yes
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dial List
34
6
Messaging
Use Messaging to send, receive, and erase messages from your phone.
Messaging Menu
Select Messaging from the main menu to access the following functions:
Level 1 >
Level 2 >
Inbox
Level 3
Messaging
Shows a list of received text and multimedia messages.
Compose a text message.
New Text Msg
New Pic Msg
Email
Compose a multimedia message.
Send an email.
Mobile IM
Voicemail
Web Alerts
Sent Msgs
Outbox
Send an instant message.
Shows how many voicemails are waiting.
Shows how many alerts are waiting.
Shows a list of messages you have successfully sent.
Shows a list of messages you have sent, but are pending or
failed.
Saved Msgs
Drafts
Shows a list of messages you have saved.
Shows a list of messages that have been started, but saved to
be completed at a later time.
Msg Settings
Access these options: Alerts
Signature QuickText Auto Retrieve
Callback Number Save to Sent
Text Msg Receipt
Erase Recent List
Reply by
,
Chat View
,
Msg List View
,
,
,
,
CC and BCC
,
,
,
Auto-Erase
,
Default Text
,
,
Pic Msg Receipt, Voicemail Number,
Text Msg Read Receipt, and Pic Msg
,
.
Erase Msgs
Access these options: Inbox
,
Outbox, Sent Msgs, Saved
Msgs Drafts, and All
,
.
Message Count
Check how many messages you have.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
35
Create a Multimedia Message
You can only send multimedia messages to
phone numbers capable of receiving them or to
email addresses. If the character and file size
limit for a single multimedia message is
exceeded, the message must be edited to meet
the size limitation.
Note: Multimedia messaging is not available
on all phones. Check with your service
provider.
Send Email
From Messaging, select Email to launch the
email application. For more information on
this application, contact metroPCS.
Send Instant Messages
From Messaging, select Mobile IM to launch
the instant message application. For more
information on this application, contact
metroPCS.
1. From New Pic Msg, enter a recipient’s
phone number or email address. (Select
Options to access contacts, groups or
recently used addresses. Scroll down to
move to the next field when done.)
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses.
2. Repeat the first step for CC and BCC, if
needed.
3. Enter a subject.
4. Enter a message.
5. Attach an image file. (Select Options to
access more features.)
Send Messages
Create a Text Message
You can only send text messages to phone
numbers capable of receiving them or to email
addresses if supported.
1. From New Text Msg, enter a recipient’s
phone number or email address. (Select
Options to access contacts, groups or
recently used addresses. Scroll down to
move to the next field when done.)
You can message up to ten recipients at
once. Use comma or spaces to separate
addresses.
6. Attach a sound file. (Select Options to
access more features.)
2. Enter the message. (Select Options to
access more features.)
7. When done, select Send
.
3. When done, select Send
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Send Email
36
Add Recipients from Recent Calls
Receive Calls while Creating Messages
If you receive a call while creating a message a
notification appears. Do one of the following:
1. At the compose message screen, select
Options > Recent Calls when entering a
phone number or email address.
2. Select a number.
•
Select Ignore to ignore the call and return
to the message screen.
•
Press the Send key to answer the call and
your phone automatically saves the
3. Complete your message.
Send to Groups
message to Drafts
.
1. At the compose message screen, select
Options > Groups when entering a phone
number or email address.
2. Select a group.
3. Complete your message.
Enter Message Recipients
The following describes how to add recipients
to your messages, depending on the services
provided. Check with your service provider for
availability.
Save Recipients as Contacts
Add Recipients from Contacts
1. At the compose message screen, select
Options > Save Address when entering a
phone number or email address.
1. At the compose message screen, select
Options > Contacts when entering a phone
number or email address.
2. Select a contact from the contacts list.
3. Select a number or address.
2. Select a number or address.
3. Select Options > Save New Contact (to
create a new contact) or Options > Add to
Contact (to add the number or address to
an existing contact).
4. Complete your message.
Add Recipients from Recent List
1. At the compose message screen, select
Options > Recent List when entering a
phone number or email address.
2. Select a number or address.
Add Recipients from Message Text
1. At the compose message screen, select
Options > Add Address when entering the
text to add more recipients.
2. Enter a number or address to add.
3. Complete your message.
3. Complete your message.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
37
Save Messages to Drafts
Attaching Files to Messages
The following describes how to select Options
to add various files to your messages when
entering the text, depending on the services
provided.
At the compose message screen, select
Options > Save Message when entering the
text. Your phone saves the message to Drafts
for you to complete at a later time.
Add Memos to Messages
Complete Messages in Drafts
1. From Drafts, highlight your desired
message.
1. At the compose message screen, select
Options > Insert Note when entering the
text.
2. Select Edit or Options > Edit
.
2. Select a memo.
3. Complete your message.
3. Complete your message.
Use Preset Text
Add Contacts to Messages
Add Preset Text
1. At the compose message screen, select
Options > Insert Contact when entering
the text.
2. Select a contact from your contacts list.
3. Complete your message.
1. At the compose message screen, select
Options > Insert QuickText when
entering the text.
2. Select a preset text entry.
3. Complete your message.
Add Slides to Messages
Save Messages as Preset Text
Use slides in a multimedia message to send
multiple files of the same type, such as pictures
or voice memos. A multimedia message may
have up to ten slides.
1. At the compose message screen, select
Options > Add New Slide when entering
the text.
1. At the compose message screen, select
Options > Save as QuickText when
entering the text to use it later as preset text.
2. Complete your message.
Save Received Messages as Preset Text
When viewing a received message, select
Options > Save as QuickText to use it later as
preset text.
2. Select a slide and add more files or text if
needed.
To navigate through the slides, select
Options > Next Slide or Previous Slide
.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Send Messages
To erase the current slide, select Options >
Erase Slide
3. Complete your message.
Set Writing Language
.
1. At the compose message screen, select
Options > Writing Language to change
the language you compose your message
in.
You can only attach a limited number of files.
Add Media Files to Messages
2. Complete your message.
1. At the compose message screen, select
Options > Media Gallery when adding a
media file.
Preview Messages
1. At the compose message screen, select
Options > Preview Message when
entering the message or media file.
2. Do one of the following:
2. Select a file to add to your message.
To remove a media file, select the
applicable option. For example, to remove
a sound, select Options > Remove Sound
3. Complete your message.
.
–
–
–
If the message has more than one slide,
select Next to view the next slide.
If the message has only one slide, select
Send to send message.
Take Pictures for Messages
1. At the compose message screen, select
Select Options to access more features.
Options > Take a Picture when adding an
image.
2. Take a picture.
3. Select it to add to your message.
4. Complete your message.
Set Individual Message Settings
The following describes how to set message
settings for individual messages.
Note: Your selection of each of the following
message settings overrides that selected for all
Record Sounds for Messages
messages from Msg Settings
.
1. At the compose message screen, select
Options > Record Sound when adding a
sound.
2. Record a sound.
3. Select it to add to your message.
4. Complete your message.
Request a Message Receipt
1. When entering a message, select Options >
Msg Settings > Msg Receipt > Request to
request a message delivery notice.
2. Complete your message.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
39
Set Message Priority
Set the Validity Period
1. When entering a message, select Options >
Msg Settings > Set Priority to set the
priority level.
1. When entering a message, select Options >
Msg Settings > Validity Period
.
2. Select Set Time to set how long to keep
your message valid before removing it
from the phone if not sent.
2. Complete your message.
Change the Callback Number
1. When entering the message, select Options
3. Press the OK key to change the time.
–
Scroll left or right to move between the
hour, minute, and AM/PM.
> Msg Settings > Callback Number
.
2. Enter your callback number and select OK
.
–
Scroll up or down to change the hour,
minute, and AM/PM.
3. Complete your message.
4. Select Next
5. Press the OK key to change the date.
.
Send Messages Later
1. When entering a message, select Options >
Msg Settings > Send Later
2. Select Immediate or Set Time to set a
specific time to send the message.
–
–
Scroll left or right to move between the
month, day, and year.
Scroll up or down to change the month,
day, and year.
.
3. Press the OK key to change the time.
6. Select Done
7. Complete your message.
.
–
Scroll left or right to move between the
hour, minute, and AM/PM.
–
Scroll up or down to change the hour,
minute, and AM/PM.
Request a Message Read Receipt
1. When entering the message, select Options
> Msg Settings > Msg Read Receipt >
Request to request a notice sent upon
reading the message.
4. Select Next
5. Press the OK key to change the date.
.
–
–
Scroll left or right to move between the
month, day, and year.
Scroll up or down to change the month,
day, and year.
2. Complete your message.
Set CC and BCC Fields
1. When entering the message, select Options
> Msg Settings > CC & BCC to enable or
disable the CC and BCC address fields.
2. Complete your message.
6. Select Done
7. Complete your message. Your phone will
save the message and send it later.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Send Messages
40
Note: If receiving a message during a call, the
phone downloads the message after the call.
1. At a message notification, select View (to
view the message) or Later (to check it
later).
2. After viewing the message, select Reply or
Options > Reply if the message has more
than one slide.
Set the Slide Interval
1. When entering the message, select Options
> Msg Settings > Slide Interval
2. Select a time interval for the slides.
3. Complete your message.
.
Manage Received Messages
Select Options to access more features.
3. Complete your message and select Send.
Reply to Text Messages
When receiving a message, your phone
displays a notification and the message icon
appears at the top of your screen. The message
icon flashes with an urgent message alert if the
message is urgent.
Reply to Multimedia Messages (with
Prompt)
When receiving a message in prompt mode,
your phone displays a notification showing a
new message is available for download.
1. At the download notification, select Yes (to
download the message) or Options (to
retrieve it later or erase it without
downloading).
2. At the message notification, select View (to
view the message) or Later (to check it
later).
1. When a message notification appears,
select Inbox (to view the message) or
Ignore (to clear the notification).
An icon appears at the top of your screen
when you have an unread message.
2. From Inbox, highlight a message and select
View > Reply (to compose your message)
or Options (to access more features).
3. Complete your message and select Send
.
3. Select Reply or Options > Reply if the
message has more than one slide.
Select Options to access more features.
Reply to Multimedia Messages (with
Auto Retrieve)
When receiving a message in auto retrieve
4. Complete your message and select Send
.
mode, your phone automatically downloads it
with a notification.
Select Options to access more features.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
41
Forward Messages
View Sender Information
1. When viewing a received message, select
When viewing a received message, select
Options > Sender to view an existing contact,
add to an existing contact, or create a new
contact depending on the sender.
Options > Forward
2. Enter a number or address.
3. Complete your message and select Send
.
.
Lock Messages
Reply to all Recipients
When viewing a received message, select
Options > Lock Msg to protect it from
accidental deletion. To unlock the message,
1. When viewing a received message, select
Options > Reply All to send your reply to
all the message recipients.
select Options > Unlock Msg
.
2. Complete the message and select Send
.
Sort Messages in Inbox
Reply with a Copy of the Message
1. From Inbox, select Options > Sort
.
1. When viewing a received message, select
2. Select a sort option.
Options > Reply with Copy
.
Go to Web Addresses in Messages
When viewing a received message, select
Options > Launch Browser to go to a web
address included in the message.
The original message appears in your reply
message.
2. Complete your message and select Send
.
Call Sender
When viewing a received message, select
Options > Call to call the sender.
Manage Attached Files
Play Attached Files
When viewing a received message with files
attached, select Options > Play (to play an
attached file), Stop (to stop playing), or Mute
(to turn off the sound).
Save Received Messages
When viewing a received message, select
Options > Save Message to save it to Saved
Msgs
.
Save Attached Files
When viewing a received message with files
attached, select the applicable save option to
save the attached files, including graphics,
sounds, contacts (vCard), or events (vCal). For
example, to save a contact, select Options >
View Recipients
When viewing a received message, select
Options > Recipients to check all recipients of
the message.
Save Contact
.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Manage Received Messages
When you have set up your voicemail, all
unanswered calls to your phone are
automatically transferred to voicemail, even if
your phone is in use or turned off.
1. Press and hold the 1 key.
View Messages with Multiple Slides
When viewing a received message containing
multiple slides, use the following options to
navigate through the slides.
•
•
Next to view the next slide.
Options > Replay to restart the message
from the beginning slide.
2. Follow the system prompts to create a
password and record a greeting.
•
•
•
Options > Pause to pause at the current
slide.
Options > Resume to resume playing the
slides.
Check your Voicemail
When you receive a voicemail message, a
notification with a voicemail message icon
appears at the top of your screen.
Options > Done to exit the message.
•
At the voicemail notification, select Call to
call your voicemail number and follow the
system prompts to retrieve the message.
Select Ignore to clear the notification
without checking messages. The
View Message Information
When viewing a received message, select
Options > Message Info to view the message
priority, sent time, size, etc.
notification icon remains on top of the
screen until you listen to the message.
When only the voicemail message icon
appears on top of the screen, select
Voicemail and follow the system prompts
to retrieve the message.
Replay Messages
When viewing a received message, select
Options > Replay to restart the message
(including a slide or sound if contained) from
the beginning.
•
Manage Voicemail
Configure your Voicemail
Before your phone can receive voicemail
messages, you need to set up a password and
record a personal greeting with your service
provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
43
Unable to Send Messages
Manage Sent Messages
You may not be able to send or receive
messages if your phone’s memory is nearly
full, or if digital service is not available at the
time. To free up memory, erase old messages.
Check Message Status in Sent Folder
Use the following symbols to check the Sent
folder for the status of messages successfully
sent.
Appended Messages
The scheduled message will be sent at
the scheduled time. You cannot cancel
delivery of the message.
If you go over the character limit for a single
message, the phone may automatically append
an empty segment to your message to make
space.
The message was sent. You cannot
cancel delivery of the message.
Warning: Your service provider may charge
you for each message segment.
The message has been received.
The message has been sent to more than
one recipient.
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down
as you enter characters, until it reaches 0.
If you continue to enter text after this counter
reaches 0, a message segment may be
appended. When you reach the message size
limit, you are prompted to edit the message or
alerted that the message is being appended.
Note: Appended messages may not be
available on all phones. Check with your
service provider.
Check Message Status in Outbox
Use the following symbols to check your
Outbox for the status of messages sent but still
in process.
The message is pending and will be sent
when possible. You can cancel delivery
of the message.
The message cannot be sent because
service is not available. An alert appears
on your phone if the message cannot be
sent.
Manage Web Alerts
1. From Web Alerts, select an alert.
2. Select Connect to launch the browser.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manage Sent Messages
44
Set Chat View
Message Settings
From Chat View, select Conversation to
group sent and received messages by contact,
phone number, or address. To view messages
in the order they are received or sent, select
The following message settings affect all
messages unless you change them for
individual messages.
Set Message Alerts
Classic
.
1. From Alerts, select Msg Alert
.
Set Message List View
From Msg List View, select one of the
following to set your message list display:
2. Select an alert for messages.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
•
•
•
•
Sender & Preview displays the sender and
first part of messages.
Sender & Date-Time displays the sender
and sent time of messages.
Msg Preview displays the first part of
messages.
Sender displays the message sender.
Ignore
.
Set Page Alerts
1. From Alerts, select Page Alert
2. Select an alert for pages.
.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
Set your Signature
You can create a signature to appear at the end
of all outgoing messages.
1. From Signature, enter your signature.
2. Select OK to save the signature.
Note: The signature counts towards the
character limit of your message.
Ignore
.
Set Voicemail Alerts
1. From Alerts, select Voicemail Alert
.
2. Select an alert for voicemails.
Edit Preset Messages
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
Your phone comes with preset messages, such
as “Please call me,” which you can insert into
the body of a text message. You can edit or
create up to 40 preset messages.
Ignore
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
45
1. From QuickText, do one of the following:
Enable Save to Sent
From Save to Sent, select Enabled to
automatically save outgoing messages to the
Sent Msgs folder.
–
Scroll to a preset message and select
Edit
.
–
Select New Msg to create a new preset
message.
Enable Auto-Erase
2. Enter or edit the text.
3. Select Save
Note: You can also save messages you have
Use Auto-Erase to set your phone to erase
messages automatically when it needs memory
for incoming messages.
.
written or received as preset messages.
From Auto-Erase, select one of the following:
Enable Auto Retrieve
From Auto Retrieve, select one of the
following:
•
•
Disabled erases no messages.
Old Inbox Msgs erases old messages in
Inbox when memory is needed.
•
Disabled turns off auto retrieve and
prompts you before downloading any
multimedia messages.
Enabled turns on auto retrieve to
automatically download multimedia
messages.
•
•
Sent Msgs erases old messages in Sent
Msgs when memory is needed.
Both erases old messages in both Inbox
and Sent Msgs when memory is needed.
•
Set Default Text
You can change the default text entry mode
when creating a text message. This setting
applies only to the Message field, not the Send
To field.
From Default Text, select Normal Alpha (to
enter text letter by letter) or Rapid Entry (to
enter text with word recognition).
Enable CC/BCC Fields
From CC and BCC, select Disabled (to hide
the CC and BCC fields) or Enabled (to show
them).
Set Callback Number
1. From Callback Number, enter a new
number to change your default callback
number.
Request Text Message Receipts
From Text Msg Receipt, select Request to
request a notification when a recipient has
received your text message.
2. Select OK to save the number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Settings
46
Request Multimedia Message Receipts
From Pic Msg Receipt, select Request to
request a notification when a recipient has
received your multimedia message.
Erase Messages
Erasing old messages frees up memory in your
phone. You can erase messages as you send or
read them, erase them one at a time, or erase
them all at once.
Set your Voicemail Number
Often your service provider automatically
programs your voicemail number (the number
your phone calls to retrieve voicemail). To
change it:
Erase a Single Message
When viewing a received message, select
Options > Erase > Yes
.
Note: You can erase a scheduled message, but
cannot cancel its delivery.
1. From Voicemail Number, select Edit
.
2. Enter your voicemail number. (Use
Options > Time Pause or Hard Pause to
Erase Messages from a Folder
From Erase Msgs, select a folder to erase
messages from. For example, to erase received
messages, select Inbox > Yes
Note: You cannot recover deleted information.
enter pauses.)
3. Select Save
.
Erase Recent List
From Erase Recent List, select Yes to clear
the list of recipients you have recently sent
messages to.
.
Erase All Messages
From Erase Msgs, select All > Yes to erase all
messages from all folders, except for voicemail
messages.
Request Text Message Read Receipts
From Text Msg Read Receipt, select Request
to request a notification when a recipient has
read your text message.
Note: You cannot recover deleted information.
Set Multimedia Message Response
From Pic Msg Reply by, select Text Msg or
Pic Msg to set the default reply to a
multimedia message.
Check Message Count
From Message Count screen, check how
many messages you have stored.
If you select Text Msg, you go to the text
message compose screen when you reply to a
multimedia message. When you select Pic
Msg, you go to the multimedia message
compose screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
47
7
Scheduler
Use Scheduler to schedule events and set
reminder alerts.
Press the OK key to save and move to the
next field.
6. Press the OK key to select a priority from
the list.
Create an Event
7. Press the OK key to select a reminder from
the list.
1. From Add New Event, enter a name.
Scroll down to move to the next field when
done.
8. Press the OK key to select a reminder
sound from the list.
2. Press the OK key to select an event type
9. Press the OK key to select During Event
to enable silent mode or Off to have normal
sounds.
from the list.
3. Press the OK key to change the date, if
needed.
10. Press the OK key to select a recurring
–
Scroll left or right to move between
month, day, and year fields.
Scroll up or down to change month,
day, and year.
event from the list, if needed.
11. Select Save
.
–
View Events
View Events by Month
1. From View Month, scroll through the
month view. (Days with events are
highlighted.)
Press the OK key to save and move to the
next field.
4. Press the OK key to change the time, if
needed.
–
Scroll left or right to move between
hour, minute, and AM/PM fields.
Scroll up or down to change hour,
minute, and AM/PM.
–
2. Press the OK key to select a date.
3. Do one of the following:
Press the OK key to save and move to the
next field.
–
Scroll left or right to move to another
date.
5. Press the OK key to change the duration, if
–
–
Select an event.
Scroll to a time and select Add New to
create a new event.
needed.
–
Scroll left or right to move between
hour and minute fields.
Scroll up or down to change hour and
minute.
–
–
Select Options to access more features.
Download from Www.Somanuals.com. All Manuals Search And Download.
Create an Event
48
View Events by Date
Sort Events by Priority
From View Day, do one of the following:
From View All Events, select Options > Sort
by Priority to sort events by their assigned
priority.
•
•
•
Scroll left or right to move to another date.
Select an event.
Scroll to a time and select Add New to
create a new event.
Modify Events
•
Select Options to access more features.
Edit an Event
Go to a Specific Date
1. From View Day, select an event.
2. At the event details screen, select Options
1. From Go to Date, scroll left or right to
move between month, day, and year fields.
Scroll up or down to change month, day, or
year.
> Edit
.
3. Modify the event and select Save
.
2. Press the OK key to select the date.
Send an Event
1. From View Day, select an event.
View Events by List
From View All Events, select an event from
the list or Options to access more features.
2. At the event details screen, select Options
> Send > via MMS (to attach the file to a
multimedia message), via Bluetooth (to
send the file to a Bluetooth-enabled
device), or To Printer (to print the file on a
Bluetooth-enabled device).
3. Complete the appropriate task.
Return to the Current Date
From View Day, select Options > Go to
Today to return to the current date.
Sort Events by Time
From View All Events, select Options > Sort
by Time to sort events by time.
Note: If your phone has no Bluetooth feature,
you may only send the file with a message.
Copy an Event
1. From View Day, select an event.
2. At the event details screen, select Options
Sort Events by Type
From View All Events, select Options > Sort
by Type to sort events by their assigned type.
> Copy
.
3. Enter a new name for the event.
4. Complete the event and select Save
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
49
–
Scroll up or down to change hour,
minute, and AM/PM.
Erase Events
Erase an Event
2. Select Save when done.
1. From View Day, select an event.
2. At the event details screen, select Options
Erase Events Automatically
From Auto Erase, select an option from the
list to set when to automatically erase your past
events.
> Erase > Yes
.
Erase the Current Day’s Events
From View Day, select Options > Erase
Today’s Events > Yes to erase all events on
that day.
Set Event Priority
From Priority, select an option to set every
event you create with this priority type.
Erase All Events
From View All Events, select Options >
Erase All Events > Yes to erase all events
from the phone.
Set Event Reminder
From Reminder, select an option to set every
event you create with this reminder setting.
Note: You cannot recover deleted information.
Set Event Reminder Alert
From Reminder Sound, select an option to set
every event you create with this reminder alert.
(Scroll to listen to sounds.)
Erase All Past Events
From View All Events, select Options >
Erase All Past Events > Yes to erase all past
events from the phone.
Set Event Silent Mode
From Silent Mode, select an option to set
every event you create with this silent mode.
Note: You cannot recover deleted information.
Change Scheduler Settings
From Settings, you can modify the following
features.
Set Scheduler Hours
1. From Scheduler Hours, modify the start
and end times.
–
Scroll left or right to move between
hour, minute, and AM/PM fields.
Download from Www.Somanuals.com. All Manuals Search And Download.
Erase Events
50
8
@metro
Download ringtones, games, graphics, and
more from @metro. For information on
airtime charges, contact your service provider.
3. Scroll down to highlight an application.
Press the OK key.
4. Follow the instructions to access the
applicaton.
Application Shopping and
Downloading
Changing your @metro
Settings
1. From the home screen, select @metro
.
Note: The first time you access @metro, it
will take a few moments to load and then a
welcome message will display. Press the OK
key to continue.
2. Scroll down to highlight Catalog and press
the OK key. The Catalog takes a few
moments to load and the Catalog menu
appears.
Use Options in My Apps to manage, sort, and
delete applications.
1. From the home screen, select @metro
2. Scroll right to select My Apps
3. Scroll Options and one of the following:
.
.
–
Launch launches the selected
application.
–
View Info displays the application
details.
3. Scroll to browse the Catalog
.
4. Follow the instructions to purchase content.
Note: Please check with your service provider
for availability of applications.
–
–
Delete removes the application.
Check Upgrade checks if a new
application version is available.
Move Apps moves an application to a
different location.
Sort List By sorts applications by date
or name.
View Purchase Log displays
applications purchase history.
–
–
–
Access Downloaded
Applications
Applications that have already been
downloaded or pre-loaded to your handset can
be accessed by selecting My Apps
1. From the home screen, select @metro
2. Scroll right to select My Apps
.
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
51
Buy New Applications
To buy new and exciting applications, visit
@metro. It provides you with a variety of
applications you can choose from.
What Do I Pay?
When you buy an application, you will be
charged for the purchase cost of the
application.
Delete Applications
You may delete applications that are no longer
needed.
1. From the home screen, select @metro
2. Scroll right to select My Apps
3. Scroll down to highlight an application.
4. Select Options > Delete
.
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Buy New Applications
52
9
MetroWEB
You can use your phone to browse the Internet
if you have obtained phone Internet services
from your service provider and if over-the-air
Internet access is available in your area.
Add a Bookmark
1. Surf to the Web page you want to
bookmark and select Options > Add to
Bookmarks
.
2. Edit the bookmark’s details, if needed.
3. Select Options > Save to save the
bookmark.
To access your saved bookmarks, select
Options > Bookmarks from any web page.
Scroll to a bookmark and press the OK key.
Launch Browser
Select MetroWEB to launch the browser. An
alert appears notifying of airtime fees, if you
have enabled web alerts. Select OK to
continue.
If this is the first time you have connected to
the Internet, a message informs you that
security is not yet enabled for your browser.
Select Yes to enable security.
Browse the Web
A browser home page with a list of bookmarks
and some browser menu options appear when
you are connected to the Web. The lock icon
appears in a secure session. You can do the
following:
•
To choose a site, scroll to the link and press
the OK key.
•
An underline and an arrow indicate that
there is more text. Scroll down to view the
rest of the text.
•
Press the Back key to return to the previous
screen.
•
•
Press the End key to exit.
Select Options to access more browser
features.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
53
10 Camera
Camera Tips
4. Select Send > via MMS (to attach to a
multimedia message), via Bluetooth (to
send to a Bluetooth-enabled device), or To
Printer (to print on a Bluetooth-enabled
device).
Select Erase to delete the picture from your
phone.
5. Press the End key to exit camera mode.
Note: If your phone has no Bluetooth feature,
you may send the file with a message only.
Your phone has a camera. Before using your
phone’s camera, here are some tips:
•
•
•
You cannot activate the camera while on an
active call or while browsing the Internet.
Once the camera is active, the home screen
acts as the viewfinder.
If you get a “Low memory” error, check
your resolution and quality compression
settings.
•
If there is no activity within 30 seconds
after you turn your camera on, the camera
times out and returns to the previous launch
point.
Other Camera Options
Camera Setting Options
Adjust the Resolution
From camera mode, select Options > Settings
> Resolution and a size for your pictures.
Numbers in the bottom left corner indicate the
current resolution setting.
•
•
Menu settings and options can only be
accessed when the camera is active.
Numbers in the top right corner indicate the
number of snapshots remaining before the
phone runs out of memory.
Take a Picture
Set Self Timer
From camera mode, select Options > Settings
> Self-Timer and a time.
1. To activate the camera, press and hold the
Camera key. You can also select Camera
from the main menu.
The
icon indicates the timer is activated.
2. Focus on the image using the phone’s
display as a viewfinder.
3. To take a picture, press the OK key. The
When you take a picture, a beep plays three
seconds from the time the shutter snaps the
picture.
picture is saved to Camera Pictures
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Tips
54
Enable Date/Time Stamp
Set Color Tone
From camera mode, select Options > Settings
> Date/Time > On to place a date/time stamp
on each picture taken.
1. From camera mode, select Options >
Settings > Color Tone
.
2. Scroll left or right to select a color tone.
Look at the viewfinder to see how each
setting looks.
The
icon indicates when the date/time
stamp is on.
Enable Multishot Mode
Set Picture Quality
From camera mode, select Options > Settings
> Multishot > On to take multiple pictures.
From camera mode, select Options > Settings
> Picture Quality and a quality level for your
picture.
The
icon indicates multishot mode is
enabled. When you take a picture, press and
hold the OK key to take multiple pictures. A
single tone plays for each picture taken.
Your camera is set to a lower resolution during
multishot mode. The resolution setting returns
to the previous setting when you are done.
When you select a higher quality level, the size
of the file is bigger.
Set Brightness Level
1. From camera mode, select Options >
Brightness
.
2. Scroll left or right to change the brightness
level. Press the OK key to set the
brightness.
Set Shutter Sound
1. From camera mode, select Options >
Settings > Shutter Sound
2. Select a sound to play when the shutter
takes a picture.
.
Go to Camera Pictures
From camera mode, select Options > Camera
Images to see all of the pictures you have
taken. These are located in Camera Pictures
.
Set White Balance
1. From camera mode, select Options >
Take a Picture in a Frame
Settings > White Balance
.
1. From camera mode, select Options >
2. Scroll left or right to select the white
balance setting. Look at the display to see
how each setting looks.
Frames
.
2. Scroll left or right to view the frames
available.
3. Select OK to choose a frame.
4. Take a picture with the frame. The frame is
part of the image and can not be removed.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
55
11 Media Gallery
Use Media Gallery to retrieve and playback media files and other downloads.
Media Gallery Menu
Select Media Gallery from the main menu to access the following functions:
Level 1 >
Level 2 >
Images
Level 3
Media Gallery
Access these options: Camera Pictures Saved Images,
Wallpapers Wallpaper Shuffle, and Caller IDs.
,
,
Tones
Access these options: Saved Sounds
,
Ringers
,
Ringer
Shuffle, and Voice Memos
.
Delete All
Access these options: Camera Pics Only
,
Images Only,
Sounds Only, and Delete All
.
Send an Image
Images
Send a Picture
1. From Camera Pictures, select a picture.
2. Select Send > via MMS (to attach to a
multimedia message), via Bluetooth (to
send to a Bluetooth-enabled device), or To
Printer (to print on a Bluetooth-enabled
device).
1. From Saved Images, select an image.
2. Select Send > via MMS (to attach to a
multimedia message), via Bluetooth (to
send to a Bluetooth-enabled device), or To
Printer (to print on a Bluetooth-enabled
device).
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may send the file with a message only.
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may send the file with a message only.
Change the Default Wallpaper
1. From Wallpapers, select a wallpaper.
2. Select Set Default
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Gallery Menu
56
Edit the Wallpaper Shuffle
Edit the Ringer Shuffle
1. From Wallpaper Shuffle, select Edit. With
no wallpapers saved, you need to add files.
2. Select Add to include a file in the shuffle,
Remove to remove a file from the shuffle,
or Options to access more features.
1. From Ringer Shuffle, select Edit.
2. Select Add to include a file in the shuffle,
Remove to remove a file from the shuffle,
or Options to access more features.
3. When finished, select Options > Done
.
3. When finished, select Options > Done
.
You can only edit the shuffle with at least a file
added.
Assign a Caller ID
1. From Caller IDs, select an image.
Play a Voice Memo
1. From Voice Memos, highlight a memo you
have recorded.
2. Select Assign
.
3. At the contacts list, select a contact.
2. Select Play
.
Use the Navigation key to control the
playback tools displayed.
Tones
Send a Sound
1. From Saved Sounds, highlight a sound.
2. Select Send > via MMS (to attach to a
multimedia message) or via Bluetooth (to
send to a Bluetooth-enabled device).
Media File Options
Rename a File
1. From a media file list, highlight a file.
3. Complete the appropriate task.
2. Select Options > Rename
.
Note: If your phone has no Bluetooth feature,
you may send the file with a message only.
3. Enter a new name and select Save
You can only rename unlocked files. Preloaded
files on your phone are always locked.
.
Assign a Ringer
1. From Ringers, highlight a ringer.
2. Select Assign and choose how you want to
assign the ringer.
Send a File
1. From a media file list, highlight a file.
2. Select Options > Send > via MMS (to
attach to a multimedia message), via
Bluetooth (to send to a Bluetooth-enabled
device), or To Printer (to print on a
Bluetooth-enabled device). The options
available depend on the file type.
3. Complete the appropriate task.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
57
3. Complete the appropriate task.
Note: If your phone has no Bluetooth feature,
you may send the file with a message only.
Modify a File
1. From a media file list, select a file.
2. Select Options > Modify
.
3. Select Options and an option to rotate,
resize, and so on.
4. When done, select Save to save over an
existing file or as a new one.
Assign a File
1. From a media file list, highlight a file.
2. Select Options > Assign and choose how
to assign the file.
3. Complete the appropriate task.
Use the Zoom
1. From a media file list, select a file.
Lock a File
2. Select Options > Zoom
3. Use the Navigation key to zoom in and out.
4. Select Cancel to exit.
.
1. From a media file list, highlight a file.
2. Select Options > Lock to protect a file
from being accidently erased. To unlock the
file, select Options > Unlock
.
View a Slideshow
1. From Camera Pictures, select Options >
Slideshow to play the slideshow of the files
contained in the current folder.
Play a File
1. From a media file list, highlight a file.
2. Select Options > Play
.
2. Select Pause (to stop), Play (to resume), or
Options (to access more features).
With Options selected, your phone
automatically pauses the slideshow.
Use the Navigation key to control the
playback tools displayed.
Add Files to a Shuffle
1. From a media file list, highlight a file.
2. Select Options > Shuffle to add the file to
the applicable shuffle.
3. When you are done, select Options > Exit
.
Erase Media Files
Erase a Single File
1. From a media file list, highlight a file.
View File Details
1. From a media file list, highlight a file.
2. Select Options > Details to view the
details such as file size or save date.
3. Select OK to exit.
2. Select Options > Erase > Yes
.
You can only erase unlocked files. Preloaded
files on your phone are always locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
Erase Media Files
58
Erase All Files in a Folder
From a media file list, select Options > Erase
All > Yes
.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Pictures
From Delete All, select Camera Pics Only >
Yes to erase all files in the Camera Pictures
folder.
Note: You can only erase unlocked files.
Erase All Image Files
From Delete All, select Images Only > Yes to
erase all files in the Images folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Sound Files
From Delete All, select Sounds Only > Yes to
erase all files in the Tones folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Erase All Media Files
From Delete All, select Delete All > Yes to
erase all files in the Media Gallery folder.
Note: You can only erase unlocked files.
Preloaded files on your phone are always
locked.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
59
12 Alarm Clock
You can set up to four alerts with your phone’s
three alarm clocks and one quick alarm.
Note: The alert occurs only if the phone is on.
Set the Quick Alarm
1. From Alarm Clock, scroll to the quick
alarm and select Set
.
2. Choose a time. (A notification shows the
quick alarm is on.)
When the quick alarm rings, select Off to turn
off the alarm, or Reset to set the quick alarm
again.
Set an Alarm
1. From Alarm Clock, scroll to one of the
alarms and select Set
2. Press the OK key to change the time, if
.
needed.
–
–
Scroll left or right to move between
hour, minute and AM/PM fields.
Scroll up or down to change hour,
minute and AM/PM.
Change Alarm Clock Settings
From Settings, you can modify the following
features.
Press the OK key to save time and move to
the next field.
3. Press the OK key to select a sound from the
list.
Set Snooze Duration
From Snooze Duration, select an option to set
how long before the alarm goes off again when
you hit the snooze.
4. Press the OK key to select a recurring
alarm from the list, if needed.
5. Press the OK key to enter a note.
Set Snooze Limit
From Snooze Limit, select an option to set
how many times you can hit the snooze.
6. Select Save
.
When the alarm rings, select Stop to turn off
the alarm or Snooze to set the alarm to ring in
another ten minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Set an Alarm
60
13 Bluetooth
The Bluetooth® wireless technology (not
available on all phones) enables wireless
connectivity with accessories such as portable
or installed hands-free car kits, phones,
handsets, computers, and so on. For details,
check with your service provider.
2. From My Devices, select Find New. Your
phone then searches and detects any
available Bluetooth devices in the vicinity.
You must enable the Bluetooth feature on
your phone.
3. At the device list, highlight a device and
You must use a Bluetooth device (compatible
with Class 2 Bluetooth wireless technology,
version 1.2) in order to use this phone
wirelessly. Bluetooth accessories display a
symbol on your phone.
select Add
Accept the pairing if prompted.
4. If necessary, enter the password provided
with the Bluetooth device and select OK
With the password accepted, the device
appears in your device list.
.
.
Enable Bluetooth
Before you can connect your phone with a
Bluetooth device, you need to enable the
Bluetooth feature on your phone.
Use Bluetooth Devices
Connect to a Device
Before you can use Bluetooth, you must get
your phone ready to communicate with a
device. This is called “connecting.”
From On/Off, select On
.
Pair with a Device
To connect your phone to a Bluetooth device,
from My Devices, highlight a device and select
To enable your phone to communicate with a
Bluetooth device, you need to "pair" the device
with your phone. The following instructions
describe the process. You may also need to
reference the user guide provided with your
Bluetooth device.
Connect
.
A notification appears confirming the
connection. You can now use the device with
your phone.
1. Prepare the Bluetooth device (accessory)
for pairing as described in the device’s user
guide.
Disconnect from a Device
From My Devices, highlight a connected
device and select Disconnect
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
61
Rename a Device
Limit Visibility
1. From My Devices, highlight a device.
By default your phone is always visible, if set
to visible mode. You can limit the time your
phone is visible to other Bluetooth devices.
From Visibility, select an option to set the
phone visible for your selected time before
becoming invisible.
2. Select Options > Rename
3. Enter a new name and select Save
.
.
Delete a Device
You can delete a Bluetooth device that you
have paired your phone with.
1. From My Devices, highlight a device.
2. Select Options > Delete > Yes
View Supported Services
Select Services to view a list of the Bluetooth
service profiles your phone supports.
.
View Device Services
Enable OBEX Authentication
A Bluetooth device paired with your phone
may have more than one service profile (such
as Headset, Handsfree, and so on). Do the
following to check the services available:
1. From My Devices, highlight a device.
From OBEX Authentication, select Enabled
With object exchange (OBEX) authentication
enabled, you need a user name and password to
transfer files via Bluetooth.
.
2. Select Options > Services
.
3. At the service list, highlight a profile and
select Connect to change the active profile.
Change Bluetooth Settings
From Settings, you can modify the following
Bluetooth features.
Change Phone’s Name
You can change the name presented for other
Bluetooth devices’ search of your phone.
From My Name, enter a new name and select
Save
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Change Bluetooth Settings
62
14 Tools & Games
Tools & Games Menu
Select Tools & Games from the main menu to access the following functions:
Level 1 >
Level 2 >
Level 3
Tools & Games
Brick Attack
Voice Memo
Scheduler
Play Brick Attack.
Access these options: Record New and Recorded Memos
Schedule an appointment.
Set an alarm.
.
Alarm Clock
Tip Calculator
Calculator
Timer
Calculate a tip.
Perform basic calculations.
Set a countdown timer.
Use a stopwatch timer.
Stopwatch
Memopad
World Clock
Access these options: New Memo and View Memos
.
View times from different time zones.
3. Select New to start the game. You have the
Play Brick Attack
following options:
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of the
screen.
–
Use the Navigation key to move the
paddle.
–
–
–
Press the Back key to pause the game.
Select Resume to restart the game.
1. Select Brick Attack
2. You may see a notification, select Yes or
No
.
Select Options
>
Exit to exit the game.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
63
Voice Memo
Use Tip Calculator
Use Voice Memo to record and play back
1. From Tip Calculator, enter the amount of
your bill.
audio memos.
2. Select the percentage you want to tip.
3. Enter the number of people sharing the bill
(or enter 1 if paying the entire bill).
4. Select Next to view the final bill.
5. Select Done when finished.
Record Voice Memos
1. From Voice Memo, select Record New
2. Record your voice memo and select Stop
when done.
.
3. Select Save
.
If you receive an incoming call while recording
a memo, the memo is saved and the incoming
call screen appears.
Use Calculator
1. From Calculator, enter the first number.
2. Select a mathematical operation:
Play Voice Memos
–
–
–
–
Scroll left to multiply.
Scroll right to divide.
Scroll up to add.
1. From Recorded Memos, highlight a
memo.
Scroll down to subtract.
2. Select Play to play the memo or Options to
access more features.
Your selection will appear highlighted.
3. Enter the second number, and press the OK
key to view the result.
4. Select Exit to return to the menu, or
Options and one of the following:
Scheduler
Use Scheduler to schedule appointments and
information.
–
MS replaces the value currently stored
in memory with the displayed result on
the screen.
M+ adds displayed result on the screen
to the value currently stored in memory.
MR displays value currently stored in
memory on the screen.
Alarm Clock
–
–
–
Clock” on page 60 for more information.
MC clears value currently stored in
memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Memo
64
Use Timer
Memopad
Write a Memo
1. From New Memo, enter the memo.
The timer counts down for the specified time.
It beeps when that amount of time has elapsed.
1. From Timer, select Set
2. Enter the time length.
.
2. Select Save
.
–
Scroll left or right to move between
hours, minutes, or seconds fields.
Scroll up or down to change hours,
minutes, or seconds.
View a Memo
From View Memos, select View to open a
memo or Options to access more features.
–
Edit a Memo
1. From View Memos, highlight a memo.
3. Select Sound, and choose from the list to
modify the sound.
4. To work the timer, select from the
following options:
2. Select Options > Edit.
3. Edit the memo, and select Save
.
–
–
–
Start begins the countdown.
Stop pauses the countdown.
Reset clears the timer.
Send a Memo
1. From View Memos, highlight a memo.
2. Select Options > Send as SMS
.
When the countdown is complete, select Off to
silence the alarm.
3. Complete the message, and select Send
.
Call a Number in a Memo
If you have a phone number in a memo, you
can call it.
Use Stopwatch
From Stopwatch, select from the following
options:
1. From View Memos, highlight a memo.
•
•
•
Start begins counting.
Stop pauses counting.
Reset clears the stopwatch.
2. Select Options > Use Numbers
.
3. Select a number, and press the Send key.
Press the Back key to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
65
Lock a Memo
You can lock a memo to prevent it from being
edited or erased.
Search World Clock
1. From World Clock, select Options >
Search City or Search Country
.
1. From View Memos, highlight a memo.
2. Enter the first letter(s) of your desired city
or country.
2. Select Options > Lock Memo
.
3. Select a city or country from the list.
To unlock a memo, select Unlock Memo
.
Erase a Memo
1. From View Memos, highlight a memo.
2. Select Options > Erase > Yes
.
Erase All Memos
From View Memos, select Options > Erase
All > Yes
.
Note: Selecting Erase All only erases
unlocked memos.
World Clock
Use World Clock to check times in cities
around the world in relation to your local time.
Set World Clock
1. From World Clock, first scroll left or right
to select a time zone.
2. Check your local time and date on the first
line, followed by your selected world city
and its time and date.
Download from Www.Somanuals.com. All Manuals Search And Download.
World Clock
66
15 Settings
Settings Menu
Select Settings from the main menu to access the following functions:
Level 1 >
Settings
Level 2 >
Bluetooth
Sounds
Level 3
Access these options: On/Off
Access these options: Ringers
,
My Devices, and Settings.
,
Roam Ringer Activation
,
Volume
,
Pwr On/Off Sound, and Key Sounds
.
Display
Access these options: Set Wallpaper
Themes Main Menu View
Banner Backlighting Brightness
Time/Date Format
,
Wallpaper Shuffle,
,
,
,
Icon Display Mode, My
,
,
Language, and
.
Convenience
Voice Features
Access these options:Date/Time Display
(with Airplane Mode enabled), Airplane Mode
Auto-Hyphen 1-Touch Dialing Fast Find Frequent List
Minute Alert Missed Call Alert, and Any Key Answer
,
Set Date/Time
,
Keyguard
,
,
,
,
,
,
.
Access these options: Automatic Add Expert Mode,
,
Display Results Digit Lengths Voice Answer, and Voice
,
,
Training
.
Accessories
Network
Access these options: Headset Sounds
,
Auto-Answer, TTY
Device, and T-coil Hearing Aid
.
Access these options: Privacy Alert
Roam/Svc Alert Roam Option Set Phone Line
and Roam Call Alert
,
Voice Privacy,
,
,
,
Location
,
.
Security
Access these options: Lock Phone
,
Limit Calls, and New
Lock Code
.
Phone Info
Memory Status
Access these options: Build Info
,
Icon Keys, and User
Guide
.
Check how much memory your phone is using.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
67
– View Ringer Shuffle
Bluetooth
1. From Ringer Shuffle, select View. Only
the files used in your shuffle appear.
2. Select Edit to modify the shuffle list or
press the Back key to exit.
Use Bluetooth to configure your devices. See
“Bluetooth” on page 61 for more information.
Sounds
Your phone has several settings that control the
sound. You can select from a variety of ringers
and adjust the volume.
Enable Roam Ringer
From Roam Ringer Activation, select
Enabled to activate the roam ringer.
Ringers
Volume
From Ringers, you can modify the following
From Volume, you can modify the following
settings.
settings.
Set Ringers
From Ringer Type, select a ringer. (Scroll
down the list to play the ringers.)
Set Ringer Volume
1. From Ringer Volume, scroll right or left to
set the ringer volume.
2. Press the OK key to save.
Set Roam Ringer
From Roam Ringer, select a ringer. (Scroll
down the list to play the ringers.)
Set Speakerphone Volume
1. From Speakerphone Volume, scroll right
or left to set the speakerphone volume.
2. Press the OK key to save.
Ringer Shuffle
– Enable Ringer Shuffle
From Ringer Shuffle, select Enable to turn on
the ringer shuffle.
Set Earpiece Volume
1. From Earpiece Volume, scroll right or left
to set the earpiece volume.
– Edit Ringer Shuffle
1. From Ringer Shuffle, select Edit
2. Press the OK key to save.
.
2. Select Add (to include the file in the
shuffle) or Remove (to remove the file
from the shuffle).
Set Keypad Volume
1. From Key Volume, scroll right or left to set
the keypad volume.
3. When finished, select Options > Done
.
2. Press the OK key to save.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth
68
Enable Smart Volume
Wallpaper Shuffle
From Smart Volume, select Enabled to
automatically adjust the volume during a call,
based on surrounding noise levels.
Enable Wallpaper Shuffle
From Wallpaper Shuffle, select Enable to
turn on wallpaper shuffle.
Set Power On/Off Sounds
Edit Wallpaper Shuffle
1. From Wallpaper Shuffle, select Edit
2. Select Add (to include a file in the shuffle)
or Remove (to remove a file from the
shuffle).
1. From Pwr On/Off Sound, select Power
.
On Sound or Power Off Sound
.
2. Select a sound to play when your phone
powers on or off. (Scroll down the list to
play the sounds.)
3. When finished, select Options > Done
.
Set Key Press Sounds
View Wallpaper Shuffle
1. From Wallpaper Shuffle, select View. The
files in your shuffle appear.
From Key Sounds, select Tone Click, or Off
,
to set the sounds you hear when pressing the
keypad.
2. Select Edit to modify the shuffle list or
press the Back key to exit.
Display
Set Wallpaper
You can select a wallpaper for your phone’s
home screen.
Set Wallpaper Shuffle Interval
1. From Wallpaper Shuffle, select Set
Shuffle Time
.
2. Select an interval time from the list. Your
wallpaper changes to another file in the
shuffle at the selected interval time.
1. From Set Wallpaper, select Camera
Pictures
To turn off wallpaper, select None
,
Saved Images, or Wallpapers.
.
2. Select a file. You may need to resize or
crop the file.
Set Theme
From Themes, select a color theme for the
display background.
3. Select Done
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
69
Set Main Menu View
From Main Menu View, select one of the
following:
Backlighting
Set Display Duration
From Backlighting, select Display Duration
and one of the following:
•
Grid displays icons of each menu item,
with its name at the top of the screen.
List displays a list of all menu items.
•
•
Always Dim forces the backlight to remain
dim before turning off.
•
The next time you view the Menu, your
selected menu style appears.
7 Seconds 10 Seconds, 15 Seconds, or 30
,
Seconds turns backlighting on for the set
time after your last keypress.
Set Icon Display Mode
To change the application bar display, select
Icon Display Mode and one of the following:
•
Always Bright forces the backlight to
remain bright before turning off.
•
On displays the application bar solid all the
time.
Off turns off the application bar.
Set Keypad Duration
From Backlighting, select Keypad Duration
and one of the following:
•
•
•
Off forces the backlight to remain dim
before turning off.
Set Greeting Banner
The banner is the personal label for your
phone, appearing on the home screen above the
time and date.
7 Seconds 10 Seconds, 15 Seconds, or 30
,
Seconds turns backlighting on for the set
time after your last keypress.
Same as Display matches the setting for
1. From My Banner, select Edit
2. Press the Back key to clear the current
banner.
.
•
the Display Duration
.
3. Enter your new text (up to 14 characters).
Set Brightness
1. From Brightness, scroll to change the
4. Select Save
.
brightness level.
2. Select Save
.
Set Language
From Language, select a language.
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
70
Set Time and Date Format
From Time/Date Format, select a time and
date format.
Enable Airplane Mode
While in an airplane, it is normally required
that you turn off your mobile phone because it
emits RF signals that interfere with air traffic
control. In airplane mode, however, your
phone does not emit RF signals. You cannot
make or receive calls, send text messages, use
the Browser or Bluetooth, but you can play
games, use the Scheduler, set the clock, and
make emergency calls to designated
emergency numbers. Please check with
uniformed personnel before operating your
phone in Airplane mode.
Convenience
Use these settings to make your phone more
convenient to use.
Enable Date/Time Display
From Date/Time Display, select Enabled to
show the date and time when the phone is in
idle state.
Set Date and Time
In Airplane mode, you can set the time and
date manually.
Note: You can only access Set Date/Time with
Airplane Mode enabled.
From Airplane Mode, select Enabled > OK
to activate airplane mode.
With airplane mode enabled, you can also set
the time and date manually.
Keyguard
1. From Set Date/Time, do the following to
change the date:
Enable Auto Keyguard
–
Scroll left or right to move between the
month, day, and year fields.
Scroll up or down to change the month,
day, and year.
Use Keyguard to automatically lock the
keypad after 60 seconds of inactivity to prevent
accidental key presses.
From Keyguard, select Enabled or from the
home screen, press and hold the Space key.
–
2. Press the OK key to save the date.
3. Do the following to change the time:
–
Scroll left or right to move between the
hour, minute, and AM/PM fields.
Scroll up or down to change the hour,
minute, and AM/PM.
Unlock Keyguard
From the home screen, select Unlock and press
the Space key to unlock the keypad.
–
4. Press the OK key to save the time.
5. Select Done
Download from Www.Somanuals.com. All Manuals Search And Download.
.
User Guide
71
Enable Auto-Hyphenation
Enable Frequent List
From Frequent List, select Enabled. With
Frequent List enabled, the last 15 of your
most frequently called contacts appear at the
Auto-hyphenation, when enabled,
automatically inserts hyphens into your phone
numbers to be consistent with the U.S. dialing
plan (or the North American Numbering Plan). beginning of your contacts list. Scroll past the
double line to view the entire contacts list.
From Auto-Hyphen, select Enabled to turn on
auto-hyphenation.
Enable Minute Alert
From Minute Alert, select Enabled. Your
phone alerts you with a short beep ten seconds
before each minute passes during a call.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location.
Set Missed Call Alert
From Missed Call Alert, select an alert type
for missed calls.
If you select an & Remind alert, the phone
notifies you once when receiving a new
message and notifies you again every five
minutes. To stop a reminder alert, select
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a
speed dial location assigned to a contact.
From 1-Touch Dialing, select Enabled to turn
on 1-touch dialing.
Ignore
.
Enable Any Key Answer
From Any Key Answer, select Enabled to
answer calls when you press any key on the
keypad.
Call Contact using Fast Find
1. From Fast Find, select Enabled to turn on
fast find.
2. From the home screen, press the keys
corresponding to the letters of the name
you want to find. A matching contact or
speed dial entry appears.
3. Scroll to your desired contact and press the
Send key to call the number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenience
72
From Digit Lengths, select one of the
following options:
Voice Features
Use the following features to customize the
voice commands.
•
•
North American recognizes only 7, 10,
and 1 + 10 digits in a phone number.
Permit All allows 4-14 digits in a phone
number.
Enable Automatic Add
From Automatic Add, select Enabled to
automatically add a contact to your voice dial
list when you create a new contact.
Voice Answer
Enable Voice Answer
You can set your phone to answer a call with
your voice when using a hands-free accessory.
1. From Auto-Answer, select Disabled
2. From Ringer Mode, select Normal
Set Expert Mode
Use Expert Mode to speak a command after
you hear a tone instead of following the initial
voice prompts.
.
From Expert Mode, select one of the
following:
Sounds
3. From Headset Sounds, select Out of
Headset
4. From Voice Answer, select With
Accessory
.
•
Normal sets the phone to default voice
prompts.
.
•
Expert sets the phone to sound tones
instead of voice prompts.
.
Answer Using Voice Answer
Set Display Results
When you receive an incoming call, the phone
prompts “Incoming call, answer?” With the
caller recognized as a contact entry in your
phone, the phone prompts “Incoming call from
(Name), answer?” Do one of the following:
You can set the phone to display up to three
voice recognition contacts when calling or
searching for a contact with voice commands.
From Display Results, select Single Best or
Three Best
.
•
•
•
Say “Yes” or press any key except the End
key to answer the call.
Say “No” or press the End key to ignore
the call.
Remain silent. The voice alert repeats twice
and the phone rings once before returning
to the home screen.
Set Digit Lengths
You can set the number of digits used for a
phone number in your voice dial list.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
73
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the
notification.
Use Voice Training
If your phone has trouble recognizing your
voice, you can train your phone to recognize
your specific voice for numbers.
1. From Voice Training, read the message
and select OK > Train Numbers > OK
.
3. Select one of the following:
–
–
–
TTY Off disables TTY.
2. Follow the prompts for each number until
training is complete.
Note: You must read the numbers digit by digit
for voice training to work.
TTY On enables TTY devices.
TTY On + Talk enables TTY devices
and voice carry over.
TTY On + Hear enables TTY devices
and hearing carry over.
–
Accessories
Note: You can also enter ##889 with your
keypad and select TTY to enable TTY.
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
Connect to Hearing Aid Device
With a T-coil hearing aid device (sold
separately) connected, you can enable the
hearing aid feature.
1. Connect the T-coil hearing aid device to
your phone.
From Headset Sounds, select Out of Phone
(ringing from the phone speaker) or Out of
Headset (ringing from the headset).
Enable Auto-Answer
From Auto-Answer, select After 5 Seconds
The phone automatically answers after five
seconds with a headset attached.
2. From T-coil Hearing Aid, select OK >
.
Enabled.
Network
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Enable Privacy Alert
From Privacy Alert, select Enabled to set
your phone to alert you when enhanced digital
CDMA privacy is lost or regained.
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
74
Enable Voice Privacy
Set Phone Line
From Voice Privacy, select Enhanced to use
enhanced digital CDMA privacy.
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
From Roam/Svc Alert, select one of the
following:
Note: You must first establish a second phone
line with your service provider. Once
established, a second phone number becomes
available in the menu for selection.
From Set Phone Line, read the note and select
OK and one of the phone lines.
When using one line, you cannot receive calls
from the other. It would be as if the phone were
“off” for that number. Your voicemail,
however, still takes messages. All contacts and
settings are shared for both lines.
•
•
Disabled turns roaming service alert off.
When No Svc alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service
is acquired again.
•
•
On Roam Change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
On Any Change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Location Information
Use Location to share your location
information with network services other than
emergency services (for example, 911, 111,
999 and 000) in serviced areas. This feature
works only when your phone is in digital
mode. You do have the option of turning off
the locator to emergency services.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
From Roam Option, select Automatic (to
allow roaming) or MetroPCS Only (to
disallow roaming).
From Location, select one of the following:
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code.
•
Location On shares your position
information, in addition to emergency
services.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
75
2. Select Lock Phone > OK and one of the
Enable Roaming Call Alert
following:
You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone
is in Emergency Mode.
–
–
Lock Now locks the phone
immediately.
On Power Up locks the phone every
time you turn it on.
From Roam Call Alert, select Enabled
.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept
or place a call while roaming, you must
Unlock the Phone
1. From the home screen, select Unlock
2. Enter your four-digit lock code.
.
press
1.
Set Limit Calls
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and your service provider’s numbers.
1. From Security, enter your four-digit lock
code.
Security
This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information.
All security features are shielded by a
four-digit lock code (typically 0000 or the last
4 digits of your phone number).
2. Select Limit Calls and one of the
following:
–
–
No Limit does not limit calls.
Limit Outgoing limits outgoing calls
while incoming calls still work.
Limit All limits both incoming and
outgoing calls.
Lock Phone
Set Lock Phone
–
With your phone locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
1. From Security, enter your four-digit lock
code.
Change Lock Code
Change your lock code from the default.
1. From Security, enter your four-digit lock
code.
2. Select New Lock Code > Yes
3. Enter a new four-digit code.
4. Re-enter your new lock code.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Security
76
Phone Info
View Version Information
Select Build Info to check your phone’s
software and hardware information.
View Phone Icons
Select Icon Keys to view the icons used in
your phone.
Access User Guide
From User Guide, access the user guide for
your phone.
Check Memory Status
From Memory Status, check how much
memory is being used by your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
77
16 Voice Commands
You can execute certain commands through
voice recognition. To control the settings
Call a Number
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Dial Number” and then speak the
digits of the number you want to call. If you
pause, the phone prompts you, “Did you
say <number>” or “Say a number” if it
does not recognize the name. Say “Yes” to
make the call, “No” to cancel the phone
call.
Call a Contact
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Contact” and the name of the person
you want to call.
The phone prompts, “Please repeat” or
“Say a name” if it does not recognize the
name. If the name you spoke matches a
contact in the voice dial list, the phone
prompts: “Name, correct?” Say “Yes” to
make the call, “No” to select a similar
name, or “Cancel” to cancel the phone call.
If the phone finds multiple voice tags that
sound like the name you said, the phone
will list the names. You will be asked to
verify which name you want to call. Say
“Yes” when you hear the correct name. Say
“No” when you hear an incorrect name.
3. Press the End key to end the call.
To modify your voice dial list, see “Enable
Voice Dial Tags” on page 34.
3. Press the End key to end the call.
Use a Shortcut
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say the name of the menu item you want to
access or say “Shortcuts” to view a list of
menu items. The phone prompts, “Say one
of the shortcuts”.
3. Say the name of the menu item you want to
access.
Download from Www.Somanuals.com. All Manuals Search And Download.
Call a Contact
78
Find a Contact
1. From the home screen, press and hold the
Send key. The phone prompts, “Say a
command”.
2. Say “Find Contact”. The phone prompts,
“Say a name”.
The phone prompts, “Please repeat” or “Say a
name” if it does not recognize the name. If the
name you spoke matches a contact in the voice
dial list, the phone prompts: “Name, correct?”
Say “Yes” to display the contact, “No” to select
a similar name, or “Cancel” to cancel the
search.
Note: You can only search for contacts that are
in the voice dial list.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
79
17 Get Help
User Guide
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
From Phone Info, select User Guide to access
the user guide for your phone. You can also
find the user guide at
•
•
The name of your service provider.
The actual error message or problem you
are experiencing.
.
Customer Support
•
•
The steps you took to reproduce the
problem.
The phone’s mobile equipment identifier
(MEID).
Your service provider’s customer support
department may be accessible directly from
your phone when you dial a number, such as
*611 (check with your service provider). They
can answer questions about your phone, phone
bill, call coverage area, and specific features
available to you, such as call forwarding or
voicemail. For questions about the phone
features, refer to the materials provided with
your phone, or visit
Note: From Phone Info, select Build Info
.
Scroll down to MEID (dec). The 18-digit
number is the MEID number. If your phone
uses an electronic service number (ESN), ESN
replaces MEID
.
Qualified Service
.
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
For additional questions, you may contact the
Kyocera Communications Inc. Customer Care
Center in any of the following ways:
•
•
•
Phone Accessories
Email: [email protected].
Phone (U. S. and Canada): 1-800-349-4478
or 1-858-882-2000 (press 2 for Product
Information).
To shop for phone accessories, visit
kyocera.superiorcommunications.com
.
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
80
Index
Symbols
B
battery
Numerics
A
alerts
applications
browser
C
call lists
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
81
call timers
calls
D
Download from Www.Somanuals.com. All Manuals Search And Download.
82
I
images
downloading
E
K
keyguard
keypad
F
G
games
L
groups
M
media files
H
headsets
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
83
menus
messages
Download from Www.Somanuals.com. All Manuals Search And Download.
84
N
notifications
Q
R
O
ringer shuffle
ringers
roaming
P
pages
phone
S
pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
85
settings
U
sounds
V
voice dial list
voicemail
speed dial list
T
volume
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Kyocera Communications Inc.
82-A6178-2EN, Rev. 001
Download from Www.Somanuals.com. All Manuals Search And Download.
|