Download from Www.Somanuals.com. All Manuals Search And Download.
Sample Control Settings
The following settings are displayed to help you learn about the capabilities of your amp. Think of them
as starting points on the path to great tones! We know you’ll find your own favorite settings as you get to
know your amp.
Clean - These settings will work for most any style of music that needs a warm, articulate tone - whether
pop, country, funk or jazz. As the VOLUME control is turned up to its highest ranges, you’ll notice that
subtle distortion is generated.
Moderate Gain/Blues - For this setting, activate the GAIN ON button. When set as shown, moderate
smooth distortion can now be heard. Adjust HIGH to set the amount of bite. The SHIFT button may also
be activated to emphasize midrange frequencies for a fuller tone.
High Gain/Rock - This setting utilizes increased gain to provide a heavier sound, loaded with crunch and
sustain. GAIN ON and SHIFT are both activated for maximum impact. Adjust LOW and HIGH to match
the tonal character of your guitar.
CLEAN SETTING
1 2 W A T T T U B E G U I T A R A M P L I F I E R
GAIN
LOWVOLUMEHIGH
INPUT
HEADPHONE
POWER
GAIN ON
SHIFT
MODERATE GAIN / BLUES SETTING
1 2 W A T T T U B E G U I T A R A M P L I F I E R
GAIN
LOWVOLUMEHIGH
INPUT
HEADPHONE
POWER
GAIN ON
SHIFT
HIGH GAIN / ROCK SETTING
1 2 W A T T T U B E G U I T A R A M P L I F I E R
GAIN
LOWVOLUMEHIGH
INPUT
HEADPHONE
POWER
GAIN ON
SHIFT
Download from Www.Somanuals.com. All Manuals Search And Download.
DANGER
IMPORTANT
EXPOSURE TO EXTREMELY HIGH NOISE LEVELS MAY CAUSE A PERMANENT
HEARING LOSS. INDIVIDUALS VARY CONSIDERABLY TO NOISE INDUCED HEARING
LOSS BUT NEARLY EVERYONE WILL LOSE SOME HEARING IF EXPOSED TO
SUFFICIENTLY INTENSE NOISE FOR A SUFFICIENT TIME.
1. Read all safety and operating instructions before using this product.
2. All safety and operating instructions should be kept for future reference.
3. Obey all cautions in the operating instructions and on the back of the unit.
4. All operating instructions should be followed.
5. This product should not be used near water, i.e. bathtub, sink, swimming
pool, wet basement, etc.
THE U.S. GOVERNMENT'S OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
(OSHA) HAS SPECIFIED THE FOLLOWING PERMISSIBLE NOISE LEVEL EXPOSURES:
6. This product should be located so that its position does not interfere with
proper ventilation. It should not be placed flat against a wall or placed
in a built-in enclosure that will impede the flow of cooling air.
7. This product should not be placed near a source of heat, such as a
stove, radiator, or another heat producing amplifier.
DURATION PER DAY IN HOURS
SOUND LEVEL db FLOW RESPONSE
8
6
4
3
90
93
95
8. Connect only to a power supply of the type indicated on the back of the
amplifier near the power supply cord.
9. Do not break off the ground pin of the power supply cord.
10. Power supply cords should always handled carefully. Never walk or place
equipment on power supply cords. Periodically check cords for cuts or
signs of stress, especially at the point where the cord exits the unit.
97
2
100
103
110
1
1/2 HR. or LESS
ACCORDING TO OSHA, ANY EXPOSURE IN THE ABOVE PERMISSIBLE LIMITS COULD
RESULT IN SOME HEARING LOSS. EAR PLUGS OR PROTECTORS IN THE EAR CANAL
OR OVER THE EARS MUST BE WORN WHEN OPERATING THIS AMPLIFICATION
SYSTEM, IF EXPOSURE IS IN EXCESS OF THE LIMITS AS PUT FORTH ABOVE, TO
INSURE AGAINST POTENTIALLY HARMFUL EXPOSURE TO HIGH SOUND PRESSURE
LEVELS, IN ORDER TO PREVENT A PERMANENT HEARING LOSS. IT IS
RECOMMENDED THAT ALL PERSONS EXPOSED TO EQUIPMENT CAPABLE OF
INDUCING HIGH SOUND PRESSURE LEVELS, SUCH AS THIS AMPLIFICATION SYSTEM,
BE PROTECTED BY HEARING PROTECTORS WHILE THIS UNIT IS IN OPERATION.
11. The power supply cord should be unplugged when the unit is unused
for long periods of time.
12. If this product is to be mounted in an equipment rack, rear support
should be provided.
13. Metal parts and vinyl covering may be cleaned with a damp rag.
14. Care should be taken so that objects do not fall and liquids are not spilled
into the unit through the ventilation ports or any other openings.
15. This unit should be checked by a qualified service technician if:
A. The power supply cord or plug has been damaged.
B. Anything has fallen or been spilled into the unit.
C. The unit does not operate correctly.
THIS APPARATUS SHALL NOT BE EXPOSED TO DRIPPING
OR SPLASHING. NO OBJECTS FILLED WITH LIQUIDS SUCH
AS VASES SHALL BE PLACED ON THE APPARATUS.
D. The unit has been dropped or the enclosure damaged.
16. The user should not attempt to service this equipment. All service
work must be done by a qualified service technician for warranty repairs.
TO AVOID ELECTRICAL SHOCK, DO NOT DISASSEMBLE. REFER
SERVICING TO QUALIFIED PERSONAL ONLY!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE CHASSIS. NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS AMPLIFIER HAS BEEN DESIGNED AND CONSTRUCTED TO PROVIDE
ADEQUATE POWER RESERVE FOR PLAYING MODERN MUSIC WHICH MAY
REQUIRE OCCASIONAL PEAK POWER. EXTENDED OPERATION AT
ABSOLUTE MAXIMUM POWER IS NOT RECOMMENDED SINCE THIS COULD
DAMAGE THE ASSOCIATED LOUDSPEAKER SYSTEM. PLEASE BE AWARE
THAT MAXIMUM POWER CAN BE OBTAINED WITH VERY LOW SETTINGS
OF THE MASTER VOLUME CONTROLS IF THE INPUT SIGNAL IS VERY
STRONG.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED
“DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF
SUFFICIENT MAGNITUDE TO CONSITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE UNIT.
Kustom Inc., 4940 Delhi Pike, Cincinnati, OH • USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|