Kuppersbusch USA Cooktop 6042 User Manual

User’s guide  
EKE 854.2/804.2/604.2  
KC 906.2  
with pan recognition  
1
3
1
3
5
47I  
2
39  
0
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your information...  
Content  
Carefully read the information in this manual before you use your appliance.  
You’ll find important information about safety and how to use, maintain and  
service your appliance so that it enjoys a long service life.  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3  
Disposing of the packaging and the old appliance . . . . . .   3  
For your information.... . . . . . . . . . . . . . . . . . . . . . . . . .   3  
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4  
Before using the first time. . . . . . . . . . . . . . . . . . . . . . .   4  
Your appliance at a glance  . . . . . . . . . . . . . . . . . . . . . .   5  
If you experience any problems, first be sure to read the chapter titled “What  
to do if trouble occurs...”. Usually it's easy to solve minor problems yourself  
and avoid unnecessary service costs.  
Please keep this manual in a safe place and pass it on to new owners for their  
information and safety.  
Using the cook top . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5  
Sensor sensivity reset  
Switch on a cooking zone (Stand-by-mode)  
The cooking setting  
Using the automatic boost function  
Switching off a cooking zone:  
Switching off the cooking surface  
Using a frying or dual-circuit cooking zone without the pan recognition  
sensor  
The following symbols are used in this operating manual:  
The warning triangle will alert you about possible health risks or things  
that can cause potential damage to your appliance.  
[
You'll find useful hints and information when you see this symbol.  
F
Warranty  
Cooking zone heating indicator  
The pan recognition function . . . . . . . . . . . . . . . . . . . . .   7  
Deactivate the pan recognition function  
This warranty is extended to the original purchaser and succeeding owners for  
products purchased for ordinary home use. It does not cover its use in a  
commercial situation. Should the appliance be sold by the original purchaser  
during the warranty period, the new owner will continue to be protected until  
the expiration date of the original purchaser's warranty period. Save your dated  
receipt or other evidence of the installation/occupancy date. Proof of original  
purchase date is needed to obtain service under warranty. The warranty  
applies even if the owner should move during the warranty period.  
Re-activate the pan recognition function  
The automatic pan size sensor of the dual circuit zone/frying zone  
Time limit function (holiday function) . . . . . . . . . . . . . . .   7  
Child proof lock (sensor-lock). . . . . . . . . . . . . . . . . . . . .   8  
What happens if...  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   8  
Selecting pots and pans . . . . . . . . . . . . . . . . . . . . . . . .   8  
Cleaning and care  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9  
Please pay attention to the information about the cleaning scraper  
Cleaning the cooking surface  
KÜPPERSBUSCH does not assume any responsibility for consequential or  
incidental damages. This warranty provides you with certain legal rights. You  
may also have other rights which may vary from state to state.  
Remove caking  
Care of the cooking surface  
What Is Covered  
For one full year from the date of the original purchase, we will provide parts,  
service and labor in your home to repair or replace any part of the cook top  
that fails because of a defect in materials or workmanship. This service is  
provided free of charge. All warranty service will be provided by our authorized  
Customer Care professionals during normal business hours.  
What to do if trouble occurs... . . . . . . . . . . . . . . . . . . . .   9  
After Sales Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
For technical information and/or  
replacement parts, please contact the  
What Isn’t Covered  
1. Service by an unauthorized agency will not be reimbursed. Likewise, the  
warranty doesn't cover any damage or repairs due to service performed by  
an unauthorized agency, or by the use of unauthorized parts.  
Küppersbusch Customer Care line  
at  
1-800-459-0844  
2. Service visits to teach you how to use the appliance.  
For the most efficient assistance,  
please have the Model and Serial  
numbers for the appliance available.  
3. Service visits to correct the installation. You are responsible for providing  
electrical wiring and other connecting facilities.  
4. Reset circuit breakers or replacement of home fuses.  
5. Damage resulting from accident, alteration, misuse, improper installation,  
abuse or installation not in accordance with local electrical codes, or  
improper storage of the appliance.  
6. Repairs due to other than normal household use.  
Disposing of the packaging and  
the old appliance  
Be sure to dispose of the transport packaging properly. Disposal should not  
have a negative impact on the environment. Recycling the packaging saves  
raw materials and reduces the amount of waste.  
Be sure to dispose of your old appliance properly, as well. Even if it can no  
longer be used, it still contains useful materials. Before discarding an old  
appliance, disconnect the power cord to prevent it from becoming a hazard.  
KC 906.2 and EKE Users Guide USA with pan recognition  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety instructions  
The cooktop must be built into a countertop opening! Do not use the  
appliance if it has not been installed!  
extinguisher.  
Don’t switch the cooking surface on unless you’re using it for cooking.  
Never use a cooking zone without a pot or pan set on it. Never use the  
appliance to heat a room!  
Be sure the appliance is properly installed and grounded by a  
qualified technician.  
The appliance may only be installed and connected to the power  
supply, maintained, and repaired by a qualified electrician in  
accordance with safety regulations. Do not repair or replace any part  
of the appliance unless specifically recommended in this manual.  
Work performed incorrectly puts your safety at risk.  
Immediately switch off the cooking zone after using with the respective  
minus key and not just by pot recognition.  
Never leave the cooking surface unattended at high heat settings.  
Boilover can cause smoking and greasy spillovers that may ignite.  
Wear proper apparel. Loose-fitting or hanging garments should not  
come in contact with the cooking surface. Dish cloths, potholders  
and aprons should not be stored near the surface units.  
This appliance is for residential use only. Use for any other purpose  
is at the owner’s risk and could be dangerous. The manufacturer  
can’t be held responsible for damage caused by improper use of this  
appliance.  
To reduce the risk of burns, ignition of flammable materials, and  
spillage due to unintentional contact with the untensil, the handle of  
an utensil should be positioned so that it is turned inward, and does  
not extend over adjacent surface units.  
Danger of burning! The cook top becomes hot  
during operation. CAUTION: Keep children away  
from this appliance.  
Use only dry potholders. Moist or damp potholders on hot surfaces  
may result in burns from steam. Do not let potholder touch a hot  
surface. Do not use a towel or other bulky cloth.  
CAUTION! Items of interest to children should not be stored in cab-  
inets above a cooktop. A child can be seriously injured by climbing  
on a cooktop to reach them.  
CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthenware,  
or other glazed utensils can be used on the range-top without breaking, due  
to the sudden change in temperature. Follow the manufacturer’s instruc-  
tions!  
Do not leave children alone or unattended in the area where the ap-  
pliance is in use. They should never be allowed to sit or stand on  
any part of the appliance.  
Don’t touch the cooking surface or areas near it. The cooking surface  
may be hot even though it’s dark in color. Areas near it may become  
hot enough to cause burns. During and after use, do not touch the  
surface, or let clothing or other flammable materials come in contact  
with it until it’s had time to cool.  
Do not place non-food items on the cooking surface when it's hot.  
Be careful when working with attachments! The connecting cord  
must not come in contact with the hot cooking surface.  
Do not put plastic on the cooking surface. Things that can melt  
(i.e. plastics, foils or sugar), must be kept away from the cooking  
surface. Be sure to immediately remove or lift off any melted  
item from the hot cooking surface. Use the supplied cleaning  
scraper in order to avoid damage to the cooking surface.  
Use the proper pan size. This appliance is equipped with different  
sized surface units. Use flat-bottomed cookware that is large enough  
to cover the surface unit heating element. The use of undersized  
cookware will leave a portion of the heating element exposed and  
direct contact could result in the ignition of clothing. Using a proper  
relationship between cookware and burners wil also improve  
efficiency. Review “Selecting pots and pans“ on page 7.  
Flammable materials should not be stored near surface units.  
Don’t put combustible or flammable objects on the cooking top.    
They could be ignited if the burners are unintentionally turned on.     
Clean and remove any burned-on materials. Don’t heat these  
materials repeatedly.  
Lime deposits are harmful to the cooking surface.  
If a wet sponge or cloth is used to wipe spills on a hot cooking area,  
be careful to avoid steam burn. Some cleaners can produce noxious  
fumes if applied to a hot surface.  
Do not use aluminium foil to line the surface unit drip bowls.  
Please follow the cleaning and maintenance instructions carefully!  
The glass ceramic surface is very durable and can easily withstand  
light to medium impacts and loads distributed over large areas. Be  
sure to avoid concentrated loads (i.e. spice bottles) from falling on  
the surface to avoid cracking or breaking of the cooking surface.  
Before using the first time  
 Before using the appliance the first time, be sure to clean the cooking sur-  
face with a mixture of water and mild detergent on a clean cloth. Then wipe  
the surface dry with a non-fluffy cloth.  
CAUTION! If the cooking surface becomes cracked or fractured, quit  
using the appliance immediately. Disconnect the power and call  
Customer Service. Cleaning solutions and spills may penetrate the  
broken cooktop and create a risk of electric shock.  
Never flambé under the cooker hood.  The fat in the filter can  
ignite!  
The connecting cable must not come in contact with the hot cooking  
surface.  
CAUTION: Overheated greases and oils may ignite themselves.  
Prepare meals with greases and oils very carefully and control the  
heat. Should fats or oils ignite, do not use water to extinguish them!  
Smother the fire or flame or use a dry chemical or foam-type  
4
KC 906.2 and EKE Users Guide USA with pan recognition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your appliance at a glance  
Using the cook top  
[
Read the safety instructions!  
EKE 854.1  
KC 906.2  
Sensor sensivity reset  
Important:  
Make sure no objects are on the sensors while the sensor sensitivity is  
being set.  
After initial connection and after a power failure the abbreviations  
F
'%0” appear briefly in the LED displays. Rotating circles are then dis-  
played. This means the sensors are being self-tested and the button sen-  
sitivity reset simultaneously.  
 Acknowledge this display by touching the Off-sensor.  
Make sure no objects are lying on the sensors! These symbols are  
switched off immediately.  
 Otherwise, remove objects and briefly disconnect the cooking zone from the  
main power source.  
EKE 804.2  
Switch on a cooking zone (Stand-by-mode)  
Before you start to use a cooking zone, put the cook top into the stand-  
by mode.  
F
When you turn the cooking surface on, you will hear a short buzzing noise  
as it heats. This is design-specific and does not affect the quality and  
operation of the appliance.  
F
 Press the sensor-button for  
approx. 2 seconds.  
The LED-display above the sen-  
sor lights up and the appliance  
is in operation (stand-by mode).  
EKE 604.2  
The stand-by mode automatically switches itself off,  
 if no cooking zone is activated within 20 seconds (after 10 seconds an  
acoustic signal will indicate that the appliance will switch itself off after an-  
other 10 seconds)  
or  
 if the appliance is not used 1 minute after starting operation.  
The cooking setting  
You have 9 cooking settings available.  
Cooking setting  
Suitable for  
1-3  
4-5  
6-8  
9
Heating, warming, browning, defrosting  
Steaming, poaching, boiling  
Roasting, deep-frying  
1
2
3
4
5
6
7
8
Dual circuit cooking zone  
Sensor buttons for cooking settings  
Off-sensor  
Heating large quantities  
Stand-by-Sensor  
Child proof lock (sensor-lock)  
Normal cooking zone  
Select the required cooking setting with the plus- or- minus sensor. It will be  
indicated in the display.  
Normal cooking zones, usably as a frying zone  
Frying zone  
If you use the minus sensor, you will start with a boost. If you use the plus-  
sensor, you start without a boost.  
KC 906.2 and EKE Users Guide USA with pan recognition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
When pressing the plus sensor,  
the cooking zone starts at cooking  
setting 5, without boost.  
Switching off a cooking zone:  
and  
When pressing the minus sen-  
sor, the cooking zone starts at  
cooking setting 9.  
This automatically starts the  
automatic boost.  
 Press the plus- and -minus sensor at the same time.  
The “0” position is visible for about 2 seconds after the appliance switches off.  
Switching off the cooking surface  
All the cooking zones can be  
switched off quickly with the off-  
sensor.  
Using the automatic boost function  
All cooking zones are equipped with an automatic boost function. Maximum  
power is used for the boost. The time period of the boost depends on the  
selected cooking setting. After the elapsed time, the cooking zone automati-  
cally switches back to the selected cooking setting.  
If the cooking zone is yet not in use  
 Press the minus sensor until the  
required cooking setting is dis-  
played. The boost function  
Using a frying or dual-circuit cooking zone with-  
out the pan recognition sensor  
switches on automatically.  
As a rule, only the smaller cooking zone diameter is heated. However, when  
using frying pans and large saucepans, you may decide to switch on the outer  
cooking zone circuit.  
Switching on the frying or dual-circuit zone:  
 Press the cooking zone symbol  
next to the plus/minus sensor.  
A dot at the bottom right of the  
display for the cooking level in-  
dicates that the function has  
been switched on.  
During automatic operation an “A”  
lights up in the display alternately  
with the selected cooking setting.  
 Pressing the cooking zone sym-  
bol will once again deactivate  
the dual circuit cooking zone or  
frying zone.  
If you are already using the cooking zone  
 Press the plus sensor again  
after reaching cooking setting 9.  
The automatic boost function is  
activated.  
Model EKE 854.1 and KC 906.2 only:  
To heat a frying pan, you can use the two small,  
closely adjacent cooking zones. The temperature  
must be controlled via the setting controls for both  
cooking zones. We recommend that you set both  
cooking zones at the same cooking level.  
2 X  
Select the required cooking set-  
ting.  
“A” lights up in the display alter-  
nately with the selected cooking  
setting.  
6
KC 906.2 and EKE Users Guide USA with pan recognition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IIf this circle lights us, there is a defect in  
the pan recognition function. However, you  
can continue to use the cooking zone.  
Cooking zone heating indicator  
Even though the cooking zone is turned off, an “H”  
will appear in the display  as long as the cooking  
zone is still hot.  
The automatic pan size sensor of the dual  
circuit zone/frying zone  
The pan recognition function  
If the pan recognition function is activated, the dual circuit zone has a sensor  
to detect the size of the pan being used.  
Using the respective minus key, immediately switch off the cooking zone.  
Do not turn it off just by pot recognition.  
[
When a small pan is placed on the cooking zone, only the inner ring will switch  
on. If the entire zone is covered by the pan, both rings will switch on.  
If you have deactivated the pan recognition function and you switch off  
the cooking zone, the pan recognition function is activated again!  
[
Please note that the outer ring must always be completely covered, even if  
you are using pans with a rounded base.  
Only operate he pan recognition function with utensils made of metal!  
F
All cooking zones have a pan recognition function. This means the cooking  
zone will recognize whether a saucepan has been put on the cooking zone or  
not.  
The dual-circuit zone can also detect the saucepan size (see “The automatic  
pan size sensor of the dual circuit zone/frying zone” at the next page).  
If a suitable pan is put on the cooking zone, “U” is  
indicated by the display.  
Moving the pan during cooking can cause the outer ring to switch off if it  
hasn’t been completely covered.  
If no pan or an unsuitable pan is put on the cook-  
ing zone, an underlined “U” is indicated.  
If the cooking zone is on and there is no pan or  
pot on it, the cooking zone automatically switches  
itself off after 1 minute.  This means you must  
switch on the cooking zone to cook again, which  
reactivates the pan recognition!  
Time limit function  
The appliance is equipped with an automatic time limit function. This function  
makes sure that the appliance isn’t in operation for an extended period of time.  
The time period of the time limit depends on the selected cooking setting, i.e.  
The higher the selected cooking setting, the faster the appliance is switched  
off.  
Deactivate the pan recognition function  
When glass pans or other pans that are unsuitable for use with the  
saucepan sensor are used, you must deactivate the pan recognition func-  
tion. This must be done for each and every cooking zone.  
F
Cooking setting  
Switching off time after  
9
8
7
6
 Press the plus and minus  
sensor at the same time be-  
fore selecting the cooking  
setting.  
1 hours  
5
4
3 hours  
4 hours  
and  
3
2
5 hours  
A circle will appear in the display next to the  
selected cooking setting.  
1
10 hours  
The function to limit operation time works separately for each cooking zone..  
KC 906.2 and EKE Users Guide USA with pan recognition  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Child proof lock (sensor-lock) Selecting pots and pans  
Operating the sensor lock prevents unauthorized people from using the appli-  
ance. In order to activate this lock, the cooking area has to be in operation.  
CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthen-  
[
ware, or other glazed cookware are suitable for range-top service without  
breaking due to the sudden change in temperature. Follow the manufac-  
turer's instructions!  
Activating childproof lock:  
Press the sensor lock (2 seconds).  
The childproof lock can be activa-  
ted if the cooking area is in oper-  
ation. It will only allow the selection  
of a lower cooking setting or the  
off switch.  
Only pots and pans made of metal can be used with the pan recognition  
function. To use other kinds of utensils, please deactivate the pan rec-  
ognition function.  
F
You can save time and power by using ideal pots and pans.  
Use pots and pans with flat, smooth bottoms.  
Uneven bottom surfaces can increase energy usage and the amount of time  
needed to start the cooking process..  
The lock is indicated by 3 flashing control indicators. .  
Pans with rough bottom surfaces will scratch the glass-ceramic cooking  
area when they are moved around.  
Use a pan with a diameter at least as large as the cooking area.  
Using undersized cookware will expose a portion of the heating element to  
direct contact and may result in ignition of clothing.  
Be careful: Switching off the cooking area doesn’t deactivate the childproof  
lock!  
Deactivating the child proof lock:  
at once,  
after max. 3 Sek.  
Whenever possible, always place a lid on the pan.  
It will help you save a lot of energy. Liquids and foods will only boil over if  
the temperature is set too high. The cooking zones enable you to set the  
required temperature precisely. With a little practice, you’ll learn how to  
choose the perfect cooking settings so nothing will boil over--even when a  
lid is on.!  
Press the sensors beneath the two left flashing control indicators at once.  
For less than three seconds press the sensor under the flashing control indi-  
cator on the right.  
Note: When the power supply has been interrupted, the childproof lock is no  
longer active.  
What happens if...  
...you press two or more sensor keys – at the same time? (i.e. when  
a pan is mistakenly put onto the sensor key?)  
No function is activated. An audible signal will sound after 10 seconds. The  
appliance will switch off automatically after 20 seconds.  
...you continue to press a sensor button even after having set the  
highest cooking setting?  
An audible signal will sound after 10 seconds. After 20 seconds the appli-  
ance will switch off automatically.  
...there is a power outage?  
The appliance won’t automatically switch on again. If the childproof lock was  
activated before the power failure, it will be deactivated.  
...the electronics overheat?  
The cooktop will automatically switch off. All 4 LED indicators will flash and  
a cyclical signal will be heard.  
8
KC 906.2 and EKE Users Guide USA with pan recognition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
What to do if trouble occurs...  
Sugar and food containing sugar (i.e. marmalade) and melted plastic  
Never unscrew the appliance! Only a qualified technician should perform  
repairs!!  
[
[
must immediately be removed from the hot cooking surface with the  
cleaning scraper. If not, the cooking surface can be ruined while it’s  
cooling down.  
However, there are some problems that you can handle yourself. First, check  
and see if there have been any operating errors. Remember – repairs during  
the warranty period are not free of charge if they are caused by operating er-  
Steam and/or pressure cleaning machines can’t be used to clean the  
appliance! This can damage the unit, and result in the risk of personal  rors or non-observance of the following instructions:  
[
injury.  
Problem  
Cooking surface can’t be  Regulator or electronic  See below: “What is to be  
switched off. component is defective. done if...”  
Possible cause  
Solution  
Risk of burning! Make sure the appliance has cooled down before  
cleaning. If a wet sponge or cloth is used to wipe spills on a hot surface,  
you could be burned by the resulting steam. Be aware that some cleaners  
can produce noxious fumes if applied to a hot surface.  
[
The LED indicator for the  LED indicator defective. Call Customer Service.  
cooking level or heat indica-  
Risk of burning, as there  
is no temperature warn-  
ing.  
[
Please note the instructions regarding cleansers.  
tor does not light up or only  
partly lights up.  
[
Clean the cooking surface after every use. Food residue that hasn’t been  
removed will burn into the surface the next time it’s turned on and then  
these incrustations may be permanent.  
F
Circulating dash symbols on  No problem;  this is the  If no objects have been lying  
all 4 LED displays. normal display after a  on or obstructing the sen-  
power interruption.  
sors, confirm this by pressing  
the Off-sensor.  
Cleanser residues can cause discoloration the next time you turn on the  
cook top. Cloths and sponges that have been used to clean other  
surfaces can cause discoloring, too.  
F
F
Horizontal dashes that are  Failure of electronic  Switch off the fuse. Call Cus-  
shown on the display run- component.  
ning from top to bottom.  
tomer Service.  
VSR O-FIX-C is the perfect cleanser for glass ceramic. You can get it from  
KÜPPERSBUSCH Customer Service.  
Cooking area doesn’t heat. Fuse is defective.  
Check the fuse and replace, if  
necessary.  
Do not use any  
- aggressive or bleaching cleaning agents that contain active oxygen, chlorine  
or corrosive components.  
Childproof lock  
activated.  
Deactivate child proof lock.  
Cooking area is defec- Call Customer Service.  
tive.  
- abrasive or aggressive cleaning or scouring agents like steel wool, soap-filled  
steel wool, metal or plastic sponges or similar agents with an abrasive surface.  
Inner circuit of the  
dual-circuit zone is  
defective.  
Do not, under any cir-  
cumstances, continue to  
use the outer circuit  
That’s  still working! It  
will destroy the glass  
ceramic surface. Call  
Customer Service.  
[
Please note the information for the cleaning scraper  
CAUTION! Risk of cutting! The blade of the cleaning scraper is very sharp!  
[
Always keep the cleaning scraper flat on the  
surface and push the caking away.  
Individual / all sensors do  
not react to touch.  
See below: “What is to be  
done if...”  
Do not scratch the surface with the edge of  
[
the scraper and don’t damage the sealing  
with the edge.  
What do you do if…  
... one or more sensors don’t react to touch?  
Possible cause: The sensors constantly adapt in sensitivity to ambient  
conditions. Unfavorable conditions (i.e. if something is laying on a sensor)  
may cause the sensors not to react for several minutes.)  
Wait for about 15 minutes or pull the appropriate fuse and then re-in-  
sert it. Repeat this procedure if necessary!  
Cleaning the cooking surface  
 Use the cleaning scraper to remove all food residue and fat splashes from  
the hot cooking surface.  
 When the cooking surface has cooled, clean it with water and a small  
amount of detergent, with a cleanser for glass ceramic surfaces or with  
VSR O-FIX-C. A soft brush or a soft sponge can also be used.  
The keys have adapted and will react to touch again.  
... one or more sensors don’t react to touch despite repeating this  
procedure?  
Possible cause: Faulty sensor key or component.  
 Wipe off the surface with clear water.  
 Dry it thoroughly.  
If you’ve repeated the procedure and the keys still don’t react, pull the  
fuse again and then contact our Customer Service.  
Remove caking  
... the circle next to the cooking setting lights up?  
Possible cause:  
Heavy food residue should be soaked first. Use a wet cloth for best results. It  
will be easier to remove the food residue.  
Defect of the pan recognition function.  
If this circle lights up, there is a defect  
in the pan recognition function,. You  
can nevertheless continue to use the  
cooking zone.  
Care of the cooking surface  
Clean the glass ceramic surfaces with a cleanser to protect it from discoloring,  
and reduce the danger of damage from sugar. It can also remove stains and  
discoloration  
KC 906.2 and EKE Users Guide USA with pan recognition  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
In the event of a problem that you can’t easily fix yourself, or for spare part  
service, please contact the Küppersbusch Customer Care line at  
.1-800-459-0844  
Always have the information from the identification panel handy when  
calling Customer Service.  
F
The panel is located on the underside of the cook top and on the cover page  
of this manual.  
Production number  
Model  
10  
KC 906.2 and EKE Users Guide USA with pan recognition  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KÜPPERSBUSCH  
112 N. East Street, Suite C  
Tampa, Florida 33602  
Telephone: 813-229-7096 Fax: 813-229-0982  
Customer Care line: 1 - 800 - 459 - 0844  
KÜPPERSBUSCH is a brand of Teka USA, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lathem Home Security System 900E User Manual
Lennox International Inc Air Cleaner PCO 12C User Manual
Lenovo Laptop 2717ASU User Manual
Lenoxx Electronics Clock Radio CR 777 User Manual
LG Electronics DVD Player DN788 User Manual
LG Electronics Stereo System MFL63284615 User Manual
Magellan GPS Receiver 604 0245 001 A User Manual
Magellan GPS Receiver Meridian FAQ User Manual
Makita Power Hammer HM1500 User Manual
Memorex Mouse RF7000 User Manual