KRU PS
Model
Espresso Vivo
Instructions
for Use
Warranty
Guarantee of
Performance
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock, and/or injury to persons,
including the following:
Read all instructions and information in this
instruction book and any other literature included in
this carton referring to this product before operating
or using this appliance.
Do not touch hot surfaces. Use handles or knobs.
To protect against fire, electric shock and personal
injury do not immerse cord, plugs, or appliance in
water or other liquid.
Close supervision is necessary when any appliance is
used by or near children.
Unplug from outlet when not in use and before
cleaning. Allow to cool before putting on or taking off
parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or has been
damaged in any manner. Return appliance to your
nearest authorized KRUPS Service Center for
examination, repair or adjustment, or call KRUPS
Consumer Service Department (see GUARANTEE OF
PERFORMANCE) for repair procedure.
The use of accessory attachments not recommended
or sold by KRUPS may result in fire, electric shock or
personal injury.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or
touch hot surfaces.
Do not place on or near a hot gas or electric burner, or
in a heated oven.
Download from Www.Somanuals.com. All Manuals Search And Download.
Always attach plug to appliance first, then plug cord
into the wall outlet. To disconnect, turn any control to
“off“, then remove plug from wall outlet.
This appliance is for household use only.
Any servicing other than cleaning should be
performed by your local authorized KRUPS Service
Center.
Appliances with Glass Containers.
A. The container is designed for use with this appliance.
It must never be used on a range top.
B. Do not set a hot container on a wet or cold surface.
C. Do not use a cracked container or a container having
a loose or weakened handle.
D. Do not clean container with cleansers, steel wool
pads, or other abrasive material.
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
This appliance is for household use. Any servicing other
than cleaning and user maintenance should be
performed by the nearest authorized KRUPS Service
Center (see Guarantee of Performance).
Do not immerse base in water.
To reduce the risk of fire or electric shock, do not
remove the base. No user
parts inside. Repair
should be done by an authorized KRUPS Service Center
only.
SPECIAL CORD SET INSTRUCTIONS
Regarding your cord set:
A. A short power-supply cord is provided to reduce risks
resulting from becoming entangled in or tripping
over a longer cord.
B. Longer extension cords are available and may be
used if care is exercised in their use.
C. If a long extension cord is used,
the marked
electrical rating of the extension cord should be at
least as great as the electrical rating of the appliance,
(2) if the appliance is of the grounded type, the
extension cord should be a grounding-type 3 wire
cord, and (3) the longer cord should be arranged so
that it will not drape over the counter top or table
top where it can be pulled on by children or tripped
over.
D. This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug
does not fully fit in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
Krups Espresso Vivo
k
m
n
a: Hinged water chamber lid
b: Removable water reservoir
c: Steam knob
d: Water level indicator
e: Steam nozzle
Removable drip tray
Pump switch
k: Thermostat indicator (yellow)
ON/OFF indicator (red)
m: ON/OFF switch
n: Cord storage
o: 1 and 2 cup filter baskets
Perfect Froth attachment
g: Filter holder
h: Removable overflow grid
Measuring spoon
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Your “Espresso
for the First lime
Features
Pump Espresso System
features a stainless steel pump/boiler that
that will make cup after cup of authentic,
crema-laden espresso.
n
n
We recommend that you get familiar with
all the parts of your “Espresso Vivo” before
operating the machine. Insert filter holder
into the machine and remove and replace
the water reservoir. Wipe off the steam
nozzle and “Perfect Froth” attachment with a
damp cloth to make sure all dust particles
from transport are removed. Wash all loose
parts in warm, soapy water, rinse
Ready Light Thermostat Indicators
lets you know when the machine is in use
and when it has reached the proper
brewing temperature.
34 oz. Water Reservoir
large capacity water container is easy to
fill for continuous cups of espresso,
cappuccino and lattes.
thoroughly and dry.
When using your “Espresso Vivo” for the
first time we recommend running water
through the machine to remove any dust
particles that may have settled during
shipping.
n
“Perfect Froth” Attachment
effortlessly produces froth for luscious
cappuccino and lattes.
Steam Nozzle
Make sure before you start that the
removable overflow grid is properly in place
and that the drip tray is properly inserted.
Before plugging the appliance into an
electrical outlet, make sure that the pump
switch is in the 0 position.
for frothing, steaming and heating of
other hot beverages.
n
n
n
Water Level Indicator
easily lets you monitor how much water
is in the reservoir.
One Two Cup Filter Baskets
allows you to brew either one or two
cups of rich, authentic espresso.
Before First Use Cleaning the Internal
System
Removable Drip Tray and Grid
large capacity drip tray and grid are easy
to remove and clean.
Before using your “Espresso
for the
first time, as well as after a long period of
non-use, you will need to prime the machine
for optimal performance. This requires
running several cups of water through the
system (without espresso). To prime the unit:
Introduction
Your new KRUPS “Espresso Vivo” features
the latest in espresso technology and the
most sophisticated features.
Step 1
n
Open the water chamber lid and remove
the water reservoir figure
Your new “Espresso Vivo” is another one of
KRUPS finest espresso makers that is now
available to you for at home use.
This allows you to conveniently bring the
water reservoir to the faucet.
n
Fill the water container with fresh
cold water just below the hinge of the
handle (see figure
n
Insert the water container back into the
appliance (see figure
Make sure that it sits in properly so the
valve on the base of the water reservoir is
activated. The front view water level
indicator tells you how much water you
have added.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2
Insert the filter holder (without espresso)
into the brewing head. Do this by raising
the filter holder up into the machine at a
45 degree angle (figure 4).
Espresso is a far richer and stronger brew
than regular coffee. It should be deep, dark
and delicious. Most people find they enjoy it
in small quantities because of its richness
and for that reason, espresso is usually
Place at least a 5 oz. cup directly under
the filter holder (see figure 5).
served in small
oz. demitassse cups.
n
Make sure the pump switch is in the ‘off”
position. Using the ON/OFF button, turn
The mark of real espresso is its wonderful
inviting fragrance and a light brown
“Crema”, found on top of the surface of the
coffee. Your “Espressso Vivo”, properly
used, will always produce espresso that is
deep, dark, and delicious. Just follow the
instructions and use fresh, well roasted
espresso beans.
“on” the appliance
fig. 6
The two indicator lights, yellow and red, will
illuminate. Some water may drip out of the
brewing head during the heating period.
This is normal.
n
Set the pump switch to the
(see figure 6).
position
This will activate the pump. Upon first use,
the boiler will need to intake water
into the boiler chamber, and You will hear a
distinct initial thumping noise.
If you choose to grind your own beans we
recommend using the KRUPS II Barista
As soon as water is released from the filter
holder, turn the pump switch back to the
“off” position to allow the unit to reach the
proper temperature.
Remember, espresso requires a much finer
grind than regular coffee. We recommend
grinding your espresso beans for
approximately 60 seconds; or until it has a
talcum powder appearance and texture.
Step 3
As soon as the yellow (thermostat) light
goes out, the machine is properly heated
and ready for use.
Set the pump switch to the
position
Before you make Your first cup of delicious
espresso, make sure that the boiler chamber
has water.
and let water run into cup, stopping and
starting water flow by using the pump
switch (see figure 9).
With the water reservoir full, place a cup
directly under the filter holder. Turn “on” the
Repeat this process until half of the water in
the water reservoir has been used.
unit and set the pump switch to
As soon
This will require you to stay with the
machine to empty each cup as it becomes
full. Upon completion of each cup set pump
switch to the “off” position.
as water begins to flow from the filter
holder, the boiler is full. Set the pump
switch back to the ‘off’ position. When the
yellow thermostat light goes off, you are
ready to make espresso.
Making Espresso
Step 1
n
Fill the water reservoir with fresh, cold
water (figures I-3).
While making espresso, water can be added
to the reservoir by opening the hinged
water chamber lid and adding water to the
10
Download from Www.Somanuals.com. All Manuals Search And Download.
water reservoir, using another receptacle to
fill the container.
If you are preparing more than one cup of
espresso, be sure to position two cups
under the brewing spouts. When preparing
cappuccino you will need a cup that has at
least a 5 oz. capacity.
CAUTION: the water reservoir is
empty and the pump is running, you
will hear a very distinct noise, which is
louder than the normal operating
sound. If this happens, turn the
n
As soon as the yellow thermostat light
goes out, set the pump switch to the
figure 15).
machine off. Check water reservoir and
refill as needed. Never let the pump
run when the water reservoir is empty,
as this can damage the pump.
When the desired amount of espresso has
been brewed, turn the pump switch back to
the off position. Remove the cup from under
the filter holder.
To remove the coffee from the filter basket,
remove the filter holder from the machine
by grasping the filter holder and turning to
the left, until it dislodges.
Step 2
n
Set the pump switch to the “off” position
and turn the unit “on” (figures 6 7).
Dispose of used coffee in a waste
Both indicator lights will illuminate. When
the yellow indicator light goes out, the unit
is ready for use.
receptacle (see figure
using the
thumb guard to hold the filter basket in
place.
Reinsert the empty filter holder back into the
machine to keep it warm.
Remove the filter holder from the
appliance. Choose the desired filter
basket which is required for making one
or two cups of espresso and insert into
filter holder (see figure 10).
If you wish to continue making espresso,
disregard the yellow thermostat light. It
simply indicates that the thermostat is
regulating the temperature.
Depending on which filter basket you have
chosen, add one measuring spoon of
espresso coffee for each cup of espresso
that you are preparing (figure
In addition to preparing espresso, you can
also use your “Espresso Vivo” to froth milk
-The one cup filter basket only requires
one KRUPS measuring spoon of espresso
coffee.
for cappucino.
reportedly takes
its name from the chocolate hues of the
robes worn by the Capuchin monks who
favored this delicious desert coffee. While
cappuccino is traditionally made up of
espresso and frothed milk, it can be tailored
to one’s own taste with cinnamon, sugar,
chocolate flakes, or even liquor. Its
versatility makes cappucino a world-wide
gourmet choice.
-The two cup filter basket only requires
two KRUPS measuring spoons of
espresso coffee.
Gently press (tamp) the coffee into the
filter holder using the bottom of the
measuring spoon (see figure
and
ensure that any loose coffee remaining
on the outer edges are removed (see
figure
As long as your “Espresso Vivo” is turned
on and the water reservoir is properly filled,
you can use the steaming feature. There is
no need to prepare espresso before using
this steaming feature.
Insert the filter holder back into the
machine by raising it up at a 45 degree
angle and turning it to the right, until
the filter holder is locked into place
(see figure 14).
For best results, you should use the “Perfect
Froth” attachment.
Place a cup which has at least a 2-2.5 oz.
capacity underneath the filter holder spout.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE:
n
If it is not in place, attach it now
figure 17).
Do not bring milk to a boil (this will happen
if large bubbles start forming at the surface
of the milk).
KRUPS “Perfect Froth” attachment lets you
froth milk perfectly for making cappuccino.
Do not let the “Perfect Froth” attachment
touch the bottom of the pitcher. This will
prevent you from frothing.the milk.
Frothing Milk for
Cappuccino
Step 1
Step 4
After the milk is frothed, keep the “Perfect
Froth” in the milk until the steam knob has
been turned to the position. This will
prevent any splattering from
The first step in making
is to
make espresso. See section “Preparing
Espresso”. When preparing cappuccino use
a cappuccino cup which has a capacity of at
least 5 oz. You should fill the cup
with espresso.
After milk is frothed, set aside. If you like
very stiff froth, let the pitcher set for a few
seconds.
way
n
Make sure that the pump switch is in the
0 position (see figure 18).
Now you are ready to add the frothed milk
to the already prepared espresso. Pour the
milk into the cup by holding back the froth
with your spoon. Fill the remainder of the
cup with the hot milk and then spoon on the
froth. In Italy cappuccino is normally one
part espresso to two parts milk plus froth.
Step 2
Take a stainless steel frothing pitcher and fill
it
aside. This amount of milk will yield enough
froth for two cups of cappuccino. If you
need more froth, repeat these steps.
to
full with fresh, cold milk and set
If
making more than one or two
cups of cappuccino, it is recommended that
you place the finished espresso on top of
the warming plate with a cloth or saucer
covering the cups. This will help to keep the
espresso hot.
We recommend using skim or 2% milk if
you prefer a stiff, dense froth. Use regular
milk if you prefer a creamier type of froth.
NOTE:
Attention:
When you start frothing milk, there will be a
thumping sound which occurs during the
steam preparation. This results from the
interval controlled water pump condensing
water into steam.
n
The top closure of the “Perfect Froth”
attachment figure 22, part has a
very fine hole which draws air into the
milk.
If this tiny hole gets clogged, “Perfect Froth”
will not work properly. Therefore, never
immerse the top closure in milk or froth.
As the thumping sound begins a few drops
of water will come out of the steam nozzle
before entirely changing over to steam.
If you wish to prepare espresso immediately
after using the steam nozzle, the machine
must be cooled down to the proper brewing
temperature. (When frothing milk, the
temperature of the water is much hotter
than when you are brewing espresso.)
Step 3
n
When the yellow thermostat light goes
out, insert the steam nozzle half way into
the milk and turn the steam knob slowly
to the max position (see figure
In order that you do not burn your next
batch of espresso, insert the clean filter
holder into the machine and set the pump
Leave the steam nozzle in the milk for
approximately 45-60 seconds, depending on
how much froth you want and the type of
milk you are using.
switch to
Allow
cup of water to run
through the machine.
1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
All parts should be rinsed in warm, soapy
water. If the small section of part A is
clogged, it can be opened using a fine
sewing needle.
This process cools the machine sufficiently
to prepare additional cups of espresso.
Use caution when removing the “Perfect
Froth” from the steaming nozzle as it may
still be hot.
Heating Liquids
The steam nozzle can also be used to heat
liquids, without frothing, such as tea and
instant soup. To heat liquids:
Use a damp cloth to clean the steam nozzle.
Use caution when cleaning or removing the
steaming nozzle as it may still be hot.
Set the pump switch to the off position.
Swing out the steam nozzle and remove the
“Perfect Froth” attachment
Make sure there is enough water in the
water reservoir
Cleaning the Machine
n
After preparing espresso five times, the
drip tray and grid may need to be
emptied and cleaned (see figure 20).
Turn the unit “on”. Initially, a small amount
of water and steam will emerge from the
steam nozzle.
The water reservoir, drip tray, baffle grid,
filter holder, and “Perfect Froth” attachment
should be washed and rinsed in warm,
soapy water on a regular basis.
As soon as the yellow thermostat light goes
out, place the cup or container under the
steam nozzle. Turn the steam knob slowly to
the max position.
The warming tray can be removed and
wiped with a damp cloth for easy cleaning.
Once liquid is heated, slowly return the
steam knob back to the position and
remove the cup from under the steam
nozzle.
Do not place any loose pieces in the
dishwasher.
NOTE:
IMPORTANT:
Clean the steam nozzle each time you have
immersed it in milk, otherwise the inside of
the nozzle becomes clogged with milk
particles. Allow the steam to escape into a
wet cloth for one or two seconds after
frothing milk. This will flush out any milk
residue.
If you wish to prepare espresso immediately
after using the steam feature, it is essential
to allow the machine to adjust to the proper
temperature. Insert the empty filter holder
and place a cup directly underneath. Turn
the pump switch to the
position and
allow water to run through until the yellow
thermostat light illuminates. Return the
pump switch to the off position and prepare
espresso.
CAUTION: Do not try to disassemble
the main body of the machine.
If necessary, the steam nozzle can be
removed using the hexagonal key located
on the measuring spoon (see figure 21).
Cleaning the Perfect Froth
Attachment
When replacing, do not overtighten.
Do not attempt this while steam nozzle is
hot.
It is strongly advised that you wipe off the
milk residue which may have collected on
the “Perfect Froth” and steaming nozzle
after the frothing process is completed.
n
For a thorough cleaning of the “Perfect
Froth” attachment, remove the separate
parts A, B, C (see figure 22).
1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
No elasticity in the brewing head seal.
(This may happen after a long period of
use). This part can be ordered through
KRUPS Consumer Service Department.
Under normal conditions you do not need to
decalcify your “Espresso Vivo”. However, in
areas where there is hard water or if you
use your machine very frequently we
recommend decalcifying. You will know
when such a cleaning is necessary by an
obvious slow down in the brewing time.
is widely available and can be
If the seal has lost its elasticity, it must be
replaced with a new one. Allow the
appliance to cool down and then unscrew
the sieve from the brewing head.
Remove the seal carefully from the
brewing head using a screw driver.
purchased through KRUPS Consumer
Service Department.
Place the new seal onto the machine and
then place the flattened side of the sieve
back into brewing head.
How To Decalcify
n
Before beginning, it is necessary to
remove the strainer from the brewing
head (see figure 23).
Problem:
Pump makes loud noise.
Cause:
This can be done using a flat head screw
driver.
No water in the water reservoir.
n
Old or dry coffee is being used, water
cannot properly flow through the coffee.
Remove the water reservoir and fill it with
luke warm water. Dissolve the decalcifying
solution into the water reservoir. Replace
the water reservoir.
Problem:
Coffee does not come out of filter holder.
Place a cup underneath the brewing spout.
Cause:
Set the pump switch to the
position.
No water in the water reservoir.
Stop between each cup and empty it as it
becomes full. Proceed with this until all of
the water has run through the machine.
Allow the appliance to cool for
n
n
Water reservoir not inserted correctly.
Filter blocked because the coffee mixture
is too fine or has been tamped too hard.
minutes when done.
Machine needs to be decalcified.
To eliminate traces of the decalcifying
solution, fill the water reservoir with fresh,
cold water.
Problem:
Espresso has no “Crema”.
Continue this process until there is no more
water in the reservoir.
Cause:
n
n
Old or dried out coffee being used.
Coffee not suitable for espresso.
Coffee ground too coarsely.
n
Too little coffee in the filter or not
properly tamped.
Problem:
Coffee leaking from filter holder.
Cause:
Problem:
n
Filter holder not properly inserted in the
machine.
Not enough froth when frothing milk.
Cause:
n
Filter holder not pushed in as far as it
will go.
n
n
Steam nozzle is clogged.
Milk is not fresh.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The pitcher that you are using is not
is recommended that you use
a stainless steel frothing pitcher.)
Cold conducts better to metal than to
glass or plastic.
The type of milk is not suitable.
We recommend using 2% or skim milk.
Whole milk is acceptable, but due to the
fat molecules, it will not have as dense a
froth, as if you were to use 2% or skim
milk.
Your KRUPS
is covered by the
following warranty:
If from date of purchase within one year this
KRUPS product fails to function because of
defects in materials or workmanship,
KRUPS North America will, at its option,
repair or replace the unit without charge,
provided the owner has a proof of date of
purchase.
This warranty will be void if malfunction
was caused by damage to the product by
accident, misuse, use on frequency or
voltage other than marked on the product
and/or described in the instructions, abuse
including tampering, damage in transit, or
use for commercial purposes. This warranty
gives you specific legal rights, and you may
also have other rights which may vary from
state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE OF-PERFORMANCE
This fine KRUPS product is manufactured according to a rigid
code of quality standards, and, with minimum care, should
give years of satisfying service. However, should the need
arise for repairs or for replacement parts within or after the
please call our CONSUMER SERVICE
DEPARTMENT:
(800) 526-5377
a day, 7 days a week
You will be provided with specific instruction on how to get
your product repaired, as well as the name and address of your
nearest authorized KRUPS Service Center. The department will
also be able to answer any general product questions you may
have.
Before calling the Consumer Service Department, please have
the type number of your KRUPS appliance available.
You must have this information before calling our Consumer
Service Department so that we may better answer your
questions. The type number can be located by looking at the
bottom of your appliance.
This product is Type
Any general
can be addressed to:
KRUPS North America, Inc.
P.O. Box 3900
Peoria, IL 61612
Download from Www.Somanuals.com. All Manuals Search And Download.
|