Add Auxiliary Audio to
Your Factory Radio
Owner’s
Manual
PXAUX
For use with:
PGHFD1
PGHGM1
PGHGM2
PGHGM3
PGHGM4
PGHGM5
PGHHD1
PGHHY1
PGHHY2
PGHMZ1
PGHNI1
PGHNI2
PGHTY1
PGHVW2
iSimple®
A Division of AAMP of America™
13190 56th Court Clearwater, FL 33760
Ph. 866-788-4237
©2009 AAMP of Florida, Inc.
Rev. 04-25-11
INST020
Download from Www.Somanuals.com. All Manuals Search And Download.
PXAUX & Optional Add-ons
Factory Radio
(not included)
Vehicle Specific Harness
(actual harness may vary)
PXAUX Interface
RCA Input
RCA Input
OR
OR
3.5mm Input
3.5mm Input
Your Audio Devices
MP3 Player
(not included)
DVD Player
(not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the iSimple® PXAUX. The PXAUX is designed to
provide endless hours of listening pleasure from your factory radio. To ensure
thatyourauxiliaryaudioinputperformscorrectlywithyourradio, werecommend
that you read this entire manual before attempting installation of the PXAUX.
This interface allows connectivity for auxiliary audio input.
ThismanualisasupplementalguidetoexplaintheoperationofthePXAUX. For
other information such as Precautions and Installation, please refer to the full
PXAMG owner’s manual that is included with your vehicle specific harness.
Compatibility
compatibility information to determine the proper vehicle specific harness
for your application.
Ford/Lincoln/Mercury PGHFD1 Operation
Selecting AUX:
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until
“AUX1” is displayed on the screen. When you press the “AUX” button, you
will see the corresponding “SAT” modes, a slight delay, and then the current
mode will be displayed.
Selecting between AUX1 / AUX2
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until
“AUX1” or “AUX2” is displayed on the screen.
General Motors PGHGM1 Operation
Non Navigation
Selecting AUX
Press the “BAND” button a few times until “XM” is displayed on the screen.
Immediately turn the rotary knob in the top right hand corner to scroll through
available sources. Once “AUX1” is displayed, press the “FWD>>” button to
select it. If you are currently in “SAT” mode you will need to press the “►I
SEEK” button instead of “FWD>>” to select “AUX1” mode.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through the available sources. Once “AUX1” or “AUX2” is displayed on the
screen press the “FWD>>” button to select it.
Navigation radio operation
Selecting AUX
Press the “FM” button then press the “XM” button. Immediately turn the rotary
tune knob in the top right hand corner to scroll through available sources.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Once “AUX1” is displayed, press the “►” button on the screen to select it. If you
are currently in “SAT” mode, press the “SEEK ►I” button instead of the “►” button
to select “AUX” mode.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode, turn the rotary knob to
cycle through the available sources. Once “AUX1” or “AUX2” is displayed
on the screen, press the “►” button to select it..
General Motors PGHGM2/PGHGM3 Operation
Selecting AUX
Press the “BAND” button a few times until XM is displayed on the screen.
Immediately turn the rotary knob to scroll through available sources. Once
“AUX1” is displayed press PRESET 2 to select it.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through the available sources. Once “AUX1” or “AUX 2” is displayed on the
screen press PRESET 2 to select it.
General Motors PGHGM4 Operation
Selecting AUX
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob
clockwise until “AUX1” is displayed. Press the “>>>>>” button to select it. (It may be
necessary to press the “CAT” button in order to make the “>>>>>” button visible.)
Selecting between AUX1 / AUX2
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob
clockwise until “AUX2” is displayed. Press the “>>>>>” button to select it. (It may
be necessary to press the “CAT” button in order to make the “>>>>>” button
General Motors PGHGM5 Operation
Non Navigation
Selecting AUX
Press the “BAND” button until “XM” is displayed on the screen. Immediately
turn the rotary knob to scroll through available sources. Once “AUX1” is
displayed, press PRESET 2 to select it.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through available sources. Once “AUX1” or “AUX2” is displayed on the
screen press PRESET 2 to select it..
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Honda/Acura PGHHD1 Operation
Selecting AUX
Press the “FM” button and then the “XM” button. Immediately turn the rotary
knob to scroll through the available sources. Once “AUX1” is displayed, press
PRESET 6 to select it.
Selecting between AUX1 / AUX2
Press the “FM” button and then the “XM” button. Immediately turn the rotary
knob to scroll through the available sources. Once “AUX1” or “AUX2” is
displayed, press PRESET 6 to select it.
Hyundai PGHHY1/PGHHY2 Operation
Selecting AUX
Press the “XM” button to cycle through the PXAUX sources until “AUX1” or
“AUX2” is displayed.
Selecting between AUX1 / AUX2
Press the “XM” button to cycle through the PXAUX sources until “AUX1” or
“AUX2” is displayed.
Mazda PGHMZ1 Operation
Selecting AUX
Press the “SAT” button to enter satellite radio mode. Press the “CATEGORY
UP” or “CATEGORY DOWN” button to scroll through the available sources
until “AUX 1” or “AUX 2” is displayed. If satellite radio is present, the PXAUX
sources will show up AFTER the last satellite radio category.
Selecting between AUX1 / AUX2
Press the “CATEGORY UP” or “CATEGORY DOWN” button to scroll through
the available sources until “AUX 1” or “AUX 2” is displayed.
Nissan PGHNI1/PGHNI2 Operation
Selecting AUX
Radios equipped with a “SAT” button
Press the “FM” button and then the “SAT” button. Immediately press the
“SEEK>>” button to scroll through the available sources. Once “AUX1” is
displayed, press the “<<TUNE” button to select it.
Radios equipped with a “RADIO” or “AM/FM/SAT” button
Pressthe“RADIO”or“AM/FM/SAT”buttonafewtimesuntil“SAT”isdisplayed.
Immediately press the “SEEK ▲” button to scroll through the available
sources. Once “AUX1” is displayed, press the “TUNE ▼” button to select it.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting between AUX1 / AUX2
For radios that have a “SAT” button
Press the “FM” button and then the “SAT” button. Immediately press the
“SEEK >>” button to scroll through the available sources. Once “AUX2” is
displayed, press the “<<TUNE” button to select it.
For radios equipped with a “RADIO” or “AM/FM/SAT” button
Press the “Radio” or “AM/FM/SAT” button a few times until “SAT” is displayed.
Immediately press the “SEEK▲” button to scroll through the available
sources. Once “AUX2” is displayed, press the “TUNE ▼” button to select it.
Toyota/Scion/Lexus PGHTY1 Operation
Selecting AUX
Press the “AM/SAT” button to switch to AM then again to switch back to SAT.
Immediately turn the rotary knob to scroll through available sources. Once
“AUX1” is displayed, press PRESET 3 to select it.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through the available sources. Once “AUX1” or “AUX2” is displayed on the
screen press PRESET 3 to select it.
Volkswagen PGHVW2 Operation
Selecting AUX
Press the “CD” button twice to switch the radio to the CD Changer source.
This will access “AUX1”.
Selecting between AUX1 / AUX2
To select “AUX2” press preset #2. To select “AUX1” press preset #1.
Troubleshooting
Symptom
Cause
Remedy
Radio shows
“DEV INIT”
PXAUX device is
initializing.
This only occurs the first time the
PXAUX is powered on. Wait a few
minutes, cycle ignition off and on then
enter SAT mode.
Radio does
not recognize
module.
Dipswitches are
not set properly
or the unit did not
initialize properly.
See connection diagram for proper
dipswitch setting. If the dipswitches
are set properly disconnect the 24 pin
micro-fit connector from the PXAUX for
5 minutes to reset the interface.
No sound.
Auxiliary cable
is not connected
to accessory or
PXAUX.
Verify that the auxiliary cable is
connected to the PXAUX and the
accessory.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Information
One Year Limited Warranty
The quality controls used in the manufacture of this product will ensure your satisfaction.
This warranty applies only to the original purchaser of this product from an authorized
iSimple® dealer. This warranty covers any supplied or manufactured parts of this prod-
uct that, upon inspection by iSimple® authorized personnel, is found to have failed in
normal use due to defects in material or workmanship. This warranty does not apply to
installation expenses. Attempting to service or modify this unit, operating this unit under
conditions other than the recommended voltage will render this WARRANTY VOID.
Unless otherwise prescribed by law, iSimple® shall not be liable for any personal injury,
property damage and or any incidental or consequential damages of any kind (includ-
ing water damage) resulting from malfunctions, defects, misuse, improper installation or
alteration of this product. All parts of this iSimple® product are guaranteed for a period
of 1 year as follows:
Within the first 12 months from date of purchase, subject to the conditions above,
iSimple® will repair or replace the product at their discretion, if it is defective in material
or workmanship providing it is returned to an Authorized iSimple® dealer, with PROOF
OF PURCHASE from an authorized iSimple® dealer.
Warning:
This equipment may be reset by unintentional electrostatic discharge during operation.
Exposure to direct sunlight or extreme heat may cause damage or malfunction.
FCC Class B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that of which the receiver is connected.
4. Consult the dealer or an experienced radio / television technical
for help.
Notice : The changes or modifications not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
For Best Performance Have It
Professionally Installed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|