Expand Your Factory Radio
add
Harness Connection
a
®
iPod
a
a
a
Dip Switches
(See Manual)
a
Port 1
Port 2
USB
NISSAN/INFINITI
370z • Cube
Pathfinder • Armada
Sentra • Maxima
Altima • Rouge
Versa • G35
M35/45 • QX56
Murano
Owner’s Manual
Media Gateway
PXAMG
iSimple® PGHNI2
A Division of AAMP of America™
13190 56th Court Clearwater, FL 33760
Ph. 866-788-4237
©2009 AAMP of Florida, Inc.
Rev. 01-28-11
Inst019
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Gateway & Optional Add-ons
*The Media Gateway
will only support 2
inputs.
Factory Radio
Not Included
Media Gateway Harness
Part #: PGHNI2
iPod
Not Included
Media Gateway
Part #: PXAMG
Harness Connection
a
a
a
a
Dip Switches
(See Manual)
a
Port
1
Port
2
USB
11Ft. iPod Cable
3Ft. HD Radio Cable
(sold with HDRT)
HD RadioTM Tuner
(sold seperately)
Part #: HDRT
Antenna Adapter
(sold seperately)
Part #: BAA36
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Thank you for purchasing the iSimple® Media Gateway. The Media Gateway is
designed to provide endless hours of listening pleasure from your factory radio. To
ensure that your iPod performs correctly with your radio, we recommend that you
read this entire manual before attempting installation of the Media Gateway.
The Media Gateway allows connectivity for iPod, Sirius Satellite Radio tuner
(SCC1 sold seperately) and the HD Radio tuner (HDRT sold separately), enabling
full control of these devices from the factory installed radio. It also retains original
system features such as satellite radio and rear seat entertainment (if equipped).
2. Precautions
UPDATING iPod FIRMWARE
For proper operation of the Media Gateway, your iPod must be updated with the most
recent version of firmware from Apple. This is done on your computer. To update the
Follow the directions on the website to complete the download. There is no charge for
this update.
PREVENTING DAMAGE TO YOUR VEHICLE OR IPOD.
Some installations require you to make wiring connections. To eliminate the risk
of an electrical short, we recommend disconnecting the vehicle’s battery prior to
installation. If you do not feel comfortable making these connections, we suggest you
seek professional installation. We recommend that the iPod be disconnected from the
interface when the vehicle is not in use.
PROPER MOUNTING LOCATION
Securely install the interface in a location free from: heat, humidity, moving parts, sharp
metal edges or direct sunlight. We recommend securing the interface to a suitable
location using: double sided tape, VelcroTM or zip-ties.
3. Compatibility Notes
Your vehicle MUST either be equipped with, or have the ability to support
date compatibility information and to verify your vehicles compatibility.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Dipswitch Settings
2007-2011 Armada
2007-2008 G35/G37
Fig. A
2007-2011 Maxima Non-Navigation
2009-2011 Murano
2007-2011 Pathfinder
2007-2011 Sentra
2007
QX56
2009-2011 370z
2011 Juke
2007-2011 Altima
2009-2010 Cube
2007-2011 Rouge
2007-2011 Versa
Fig. B
Fig. B
2007-2008 M35/45
Dipswitch Overview
This is a quick description of the dipswitch functions for the PXAMG in Nissan
applications. If you are experiencing Seek or Tune control issues, or would like
to change the operation of the “SEEK” and “TUNE” buttons, this section may be
helpful to you.
Dipswitch 3
Reverses “SEEK” and “TUNE” button configurations; this is good for allowing
the end user to configure the “SEEK” and “TUNE” buttons to their personal
preference. For example: In the Armada/Pathfinder, the default setting for the HD
Radio controls causes the Seek and Tune functions to be reversed. This is so
the iPod controls can utilize the tuning knob to scroll through the browse menu. If
you have purchased this kit mainly for HD Radio and not iPod, turning dipswitch
3 on will reverse the “SEEK” and “TUNE” commands to their respective buttons.
However when this is done, turning the Tuning Knob on the radio clockwise will
no longer do track forward or scroll through the browse menu in iPod mode, those
commands have now been assigned to the “SEEK>>” button.
1. Disconnect Media Gateway from vehicle harness.
2. Turn on dipswitch #3 by moving it down.
3. Connect Media Gateway to vehicle harness.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Installation
1. When making electrical connections it is always recommended that the
vehicle’s battery be disconnected from the electrical system before performing
the installation.
2. Carefully remove the trim panels covering the bolts that secure the radio into
the dash cavity. Remove these bolts, and carefully pull the radio from the dash of
the vehicle. This will provide access to the factory radio connectors where you will
connect the Media Gateway harness.
3. Disconnect the factory 20-Pin and 12-Pin harnesses from the back of the radio.
Disconnect the antenna from the radio.
4. Connect the 8-Pin iPod docking cable into the first port on the Media Gateway
(farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash
to the location where the iPod will be mounted or stored (for example the glove box
or center console). This location will vary based on the vehicle, and the customer’s
prefrence. When running this cable through the dash be sure to secure it away from
moving parts or sharp metal edges that may damage the cable.
5. If connecting the HD Radio Tuner (HDRT sold separately), make the following
connections before connecting the PXAMG to the vehicle. Plug the 3 foot HD
Radio Cable (8-Pin mini-din to 8-Pin mini-din) into the second port (closest to the
dipswitches) on the Media Gateway. Connect the other end of this cable into the HD
Radio tuner. Connect the factory antenna cable into the antenna connection on the
HD Radio tuner (HDRT) using a Best Kits BAA36 antenna adaptor (or equivalent) if
needed to make this connection.
6. If connecting the Satellite Radio tuner (SCC1 sold separartely), make the folllowing
connections before connecting the PXAMG to the vehicle. Plug the black end of
the 3 foot PXAMGSR (8-Pin mini-din to 8-Pin mini-din; sold seperately) into the
second port (closest to the dipswitches) on the Media Gateway. If you are installing
the Satellite Radio Tuner with the HDRT, connect the PXAMGSR cable to the port
farthest from the dipswitches. Connect the gray end of this cable into the Satellite
Radio tuner.
7. Plug in the male connectors on the PGHNI2 harness into the 20-pin and 12-
pin ports on the back of the radio. Next, connect the factory 20-pin and 12-pin
harnesses into the female connectors on the PGHNI2 harness. Be sure to make a
firm connection but do not force it. Plug the Black micro-fit 24-pin connector on the
PGHNI2 harness into the PXAMG Media Gateway box.
8. To complete the installation secure the Media Gateway (PXAMG) and HD Radio
tuner (HDRT) into the cavity in the dash behind the radio. Be sure that the cables
and interface modules are not near moving parts or sharp metal edges as they may
damage the cables. To prevent rattling noises inside the dash use zip ties, tape or
other fasteners to mount the interfaces securely.
9. With all connections made, reconnect the vehicle’s battery, insert the key into the
ignition, and turn the vehicle on. Check for proper operation of the Media Gateway
and HD Radio tuner before reinstalling the factory dash panels.
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Note: The first time you access the Media Gateway, your radio may display “DEV
INIT” while the device is initializing. If this is displayed, please wait one minute then
cycle the ignition off and on. Then access SAT mode again to begin normal gateway
operation.
6. 370z/CUBE/Juke
iPod Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately press the “SEEK
▲” button to scroll through the available sources. Once “IPOD” is displayed, press the
“TUNE ▼” button to select it.
Next Track
Press the “SEEK ▲” button to advance to the next track.
Previous Track
Press the “SEEK ▼” button to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “TUNE ▼” button to enter the Browse menu or to make a selection while in
the Browse menu
Menu Navigation
Press the “SEEK ▲” button to scroll through the options in the Browse menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Changing Display
Press the “DISP” button to toggle through the display modes (Track, Artist, etc).
Download from Www.Somanuals.com. All Manuals Search And Download.
Browse by Artist
Press the “TUNE ▼” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Press the “SEEK ▲” button until “AR:ARTIST” is displayed.
Press the “TUNE ▼” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Press the “Seek▲” button to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “TUNE ▼” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Press the “SEEK ▲” button to cycle through the albums.
Once the desired album is displayed,
Press the “TUNE ▼” button to select the desired album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Press the “SEEK ▲” button to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “TUNE ▼” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately press the “SEEK ▲”
button to scroll through the available sources. Once “HD-FM” is displayed, press the
“TUNE ▼” button to select it.
Tune Up
Press the “TUNE▲” button to manually tune up.
Seek Up
Press the “SEEK ▲” button to seek up to next available station.
Tune Down
Press the “TUNE ▼” button to manually tune down.
Seek Down
Press the “SEEK ▼” button to seek down to next available station.
Changing Bands
Press the “AM/FM” button and then the “AUX” button. Immediately press the “SEEK ▲”
button scroll through the available sources. Once the band you would like to select is
displayed (“HD-AM” or “HD-FM”), press the “TUNE ▼” button to select it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Press “SEEK ▲” to
select the preset location (1-18) where you wish to store the preset. When the preset
location is displayed (for example PRE1) press the “TUNE▲” button to store it. The
screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Press the “SEEK ▲” button to scroll through the stored
preset stations. When the desired preset is displayed, press the “TUNE ▼” button to
select it.
Exit Menu
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Changing Display:
Press the “DISP” button to display artist and track information if the current HD Radio
station is transmitting that information.
Steering Wheel Controls
Press and hold “▲”to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately press the “SEEK ▲”
button to scroll through the available sources. Once “SIRIUS” is displayed, press the
“TUNE ▼” button to select it.
Channel Up
Press the “TUNE ▲” button to move up through the channels.
Channel Down
Press the “TUNE ▼” button to move down through the channels.
Category Up
Press the “SEEK ▲” button to move up through the categories.
Category Down
Press the “SEEK ▼” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting AUX Input
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately press the “SEEK
▲” button to scroll through the available sources. Once “AUX” is displayed, press the
“TUNE ▼” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately press the “SEEK
▲” button to scroll through the available sources. Once “SAT” is displayed, press the
“TUNE ▼” button to select it.
7. Pathfinder & Armada
iPod Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“IPOD” is displayed, press the “<<SEEK” button to select it.
Next Track
Turn the rotary TUNE KNOB clockwise to advance to the next track.
Previous Track
Turn the rotary TUNE KNOB counter clockwise to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “<<SEEK” button to enter the Browse menu or to make a selection while in
the Browse menu.
Menu Navigation
Turn the rotary TUNE KNOB clockwise to scroll through the options in the Browse
menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Browse by Artist
Press the “<<SEEK” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Turn the rotary TUNE KNOB until “AR:ARTIST” is displayed.
Press the “<<SEEK” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Turn the rotary TUNE KNOB to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “<<SEEK” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Turn the rotary TUNE KNOB to cycle through the albums.
Once the desired album is displayed,
Press the “<<SEEK” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Turn the rotary TUNE KNOB to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “<<SEEK” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“HD-FM” is displayed, press the “<<SEEK” button to select it.
Tune Up
Press the “SEEK >>” button to manually tune up.
Seek Up
Turn the Tuning Knob Clockwise to seek up to next available station.
Tune Down
Press the “<<SEEK” button to manually tune down.
Seek Down
Turn the rotary TUNE KNOB Counter-clockwise to seek down to next available
station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources.
Once the band you would like to select is displayed (“HD-AM” or “HD-FM”), press the
“<<SEEK” button to select it.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Turn the rotary TUNE
KNOB to select the preset location (1-18) where you wish to store the preset. When the
preset location is displayed (for example PRE1) press “SEEK>>” to store it. The screen
will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Turn the rotary TUNE KNOB to scroll through the stored
preset stations. When the desired preset is displayed, press the “<<SEEK” button to
select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“SIRIUS” is displayed, press the “<<SEEK” button to select it.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB counter-clockwise to move down through the channels.
Category Up
Press the “SEEK>>” button to move up through the categories.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“AUX” is displayed, press the “<<SEEK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“SAT” is displayed, press the “<<SEEK” button to select it.
8. Sentra & Maxima
Important Configuration Process
To ensure proper functionality of your PXAMG iPod interface, you must first set the
“TUNE” and “SEEK” buttons to the proper configuration. To do this you must first enter
theModeSelectMenu. Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedon
the screen. Immediately press the “SCAN” button until “TUNEREV” is displayed. After
6 seconds the radio will time out and the “TUNE” button is now configured properly. You
must repeat the same process for the “SEEK” button. To do this you must first enter the
Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on
the screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After
6 seconds the radio will time out and the “SEEK” button is now configured properly.
iPod Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK>>” button to scroll through the available sources. Once “IPOD” is
displayed, press the “<<TUNE” button to select it.
Next Track
Press the “SEEK>>” button to advance to the next track.
Download from Www.Somanuals.com. All Manuals Search And Download.
Previous Track
Press the “<<SEEK” button to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “TUNE>>” button TWICE to enter the Browse menu or to make a selection
while in the Browse menu
Menu Navigation
Press “SEEK>>” to scroll through the options Browse menu.
Steering Wheel Controls
Press and hold “▲” to move forward one track or “▼” to move backward one track.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Changing Display
Press the “DISP” button to toggle through the display modes (Track, Artist, etc).
Browse by Artist
Press the “TUNE>>” button TWICE to enter the Browse menu.
”PL:LIST” will appear on your display.
Press the “SEEK>>” button until “AR:ARTIST” is displayed.
Press the “TUNE>>” button TWICE to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Press the “SEEK>>” button to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “TUNE>>” button TWICE to select the artist and display the albums by that
artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Press the “SEEK>>” button to cycle through the albums.
Once the desired album is displayed,
Press the “TUNE>>” button TWICE to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Press the “SEEK>>” button to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “TUNE>>” button TWICE to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
Download from Www.Somanuals.com. All Manuals Search And Download.
HD Radio Operation
Important Configuration Process
To ensure proper functionality of your HD tuner, you must first set the “TUNE” and
“SEEK” buttons to the proper configuration. (Note: You do not have to repeat this
process if you have already done so for iPod control!) To do this you must first enter the
Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on
the screen. Immediately press the “SCAN” button until “TUNEREV” is displayed. After
6 seconds the radio will time out and the “TUNE” button is now configured properly. You
must repeat the same process for the “SEEK” button. To do this you must first enter the
Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on
the screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After
6 seconds the radio will time out and the “SEEK” button is now configured properly.
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK>>” button to scroll through the available sources. Once “HD-FM” is
displayed, press the “<<TUNE” button to select it.
Tune Up
Press the “TUNE>>” button TWICE to manually tune up.
Seek Up
Press the “SEEK>>” button to seek up to next available station.
Tune Down
Press the “<<TUNE” button TWICE to manually tune down.
Seek Down
Press the “<<SEEK” button to seek down to next available station.
Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK>>” button to scroll through the available sources.
Once the band you would like to select is displayed (“HD-AM” or “HD-FM”), press the
“<<TUNE” button to select it.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Press “SEEK>>” to
select the preset location (1-18) where you wish to store the preset. When the preset
location is displayed (for example PRE1) press “<<TUNE” button TWICE to store it.
The screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Press “SEEK>>” to scroll through the stored preset stations.
When the desired preset is displayed, press the “TUNE>>” button TWICE to select it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Changing Display:
Press the “DISP” button to display artist and track information if the current HD Radio
station is transmitting that information.
Steering Wheel Controls
Press and hold “▲” to seek up or “▼” to seek down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK>>” button to scroll through the available sources. Once “SIRIUS” is
displayed, press the “<<TUNE” button to select it.
Channel Up
Press the “SEEK>>” button to move up through the channels.
Channel Down
Press the “<<SEEK” button to move down through the channels.
Category Up
Press the “TUNE>>” button to move up through the categories.
Category Down
Press the “<<TUNE” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting AUX Input
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK>>” button to scroll through the available sources. Once “AUX” is
displayed, press the “<<TUNE” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK>>” button to scroll through the available sources. Once “SAT” is
displayed, press the “<<TUNE” button to select it.
9. 2009-2010 Maxima
iPod Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary knob
to scroll through the available sources. Once “IPOD” is displayed, press the “<<SEEK”
button to select the displayed mode
Next Track
Turn the rotary TUNE KNOB clockwise to advance to the next track.
Previous Track
Turn the rotary TUNE KNOB counter clockwise to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “<<SEEK” button to enter the Browse menu or to make a selection while in
the Browse menu.
Menu Navigation
Turn the rotary TUNE KNOB clockwise to scroll through the options in the Browse
menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Browse by Artist
Press the “<<SEEK” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Turn the rotary TUNE KNOB until “AR:ARTIST” is displayed.
Press the “<<SEEK” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Turn the rotary TUNE KNOB to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “<<SEEK” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Turn the rotary TUNE KNOB to cycle through the albums.
Once the desired album is displayed,
Press the “<<SEEk” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Turn the rotary TUNE KNOB to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “<<SEEK” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary knob
to scroll through the available sources. Once “HD-FM” is displayed, press the “<<SEEK”
button to select the displayed mode.
Tune Up
Press the “SEEK >>” button to manually tune up.
Seek Up
Turn the Tuning Knob Clockwise to seek up to next available station.
Tune Down
Press the “<<SEEK” button to manually tune down.
Seek Down
Turn the rotary TUNE KNOB Counter-clockwise to seek down to next available
station.
Changing Bands
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
knob to scroll through the available sources. Once the band you would like to select is
displayed (“HD-AM” or “HD-FM”), press the “<<SEEK” button to select the displayed
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Turn the rotary TUNE
KNOB to select the preset location (1-18) where you wish to store the preset. When the
preset position is displayed (for example PRE1) press “SEEK>>” to store it. The screen
will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Turn the rotary TUNE KNOB to scroll through the stored
preset stations. When the desired preset is displayed, press the “<<SEEK” button to
select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary knob
toscrollthroughtheavailablesources. Once“SIRIUS”isdisplayed, pressthe“<<SEEK”
button to select the displayed mode.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB counter-clockwise to move down through the channels.
Category Up
Press the “SEEK>>” button to move up through the categories.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting AUX Input
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
TUNE KNOB to scroll through the available sources. Once “AUX” is displayed, press
the “<<SEEK” button to select the displayed mode.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
TUNE KNOB to scroll through the available sources. Once “SAT” is displayed, press
the “<<SEEK” button to select the displayed mode.
10. 2009-2010 Murano
iPod Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary knob
to scroll through the available sources. Once “IPOD” is displayed, press the “<<SEEK”
button to select the displayed mode
Next Track
Turn the rotary TUNE KNOB clockwise to advance to the next track.
Previous Track
Turn the rotary TUNE KNOB counter clockwise to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “<<SEEK” button to enter the Browse menu or to make a selection while in
the Browse menu.
Menu Navigation
Turn the rotary TUNE KNOB clockwise to scroll through the options in the Browse
menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Browse by Artist
Press the “<<SEEK” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Turn the rotary TUNE KNOB until “AR:ARTIST” is displayed.
Press the “<<SEEK” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Turn the rotary TUNE KNOB to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “<<SEEK” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Turn the rotary TUNE KNOB to cycle through the albums.
Once the desired album is displayed,
Press the “<<SEEk” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Turn the rotary TUNE KNOB to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “<<SEEK” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary knob
to scroll through the available sources. Once “HD-FM” is displayed, press the “<<SEEK”
button to select the displayed mode.
Tune Up
Press the “SEEK >>” button to manually tune up.
Seek Up
Turn the Tuning Knob Clockwise to seek up to next available station.
Tune Down
Press the “<<SEEK” button to manually tune down.
Seek Down
Turn the rotary TUNE KNOB Counter-clockwise to seek down to next available
station.
Changing Bands
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
knob to scroll through the available sources. Once the band you would like to select is
displayed (“HD-AM” or “HD-FM”), press the “<<SEEK” button to select the displayed
mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Turn the rotary TUNE
KNOB to select the preset location (1-18) where you wish to store the preset. When the
preset position is displayed (for example PRE1) press “SEEK>>” to store it. The screen
will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Turn the rotary TUNE KNOB to scroll through the stored
preset stations. When the desired preset is displayed, press the “<<SEEK” button to
select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary knob
toscrollthroughtheavailablesources. Once“SIRIUS”isdisplayed, pressthe“<<SEEK”
button to select the displayed mode.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB counter-clockwise to move down through the channels.
Category Up
Press the “SEEK>>” button to move up through the categories.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting AUX Input
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
TUNE KNOB to scroll through the available sources. Once “AUX” is displayed, press
the “<<SEEK” button to select the displayed mode.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
TUNE KNOB to scroll through the available sources. Once “SAT” is displayed, press
the “<<SEEK” button to select the displayed mode.
11. Altima & Rouge
iPod Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “IPOD” is
displayed, press the “TUNE ▼” button to select it.
Next Track
Press the “SEEK ▲” button to advance to the next track.
Previous Track
Press the “SEEK ▼” button to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “TUNE ▼” button to enter the Browse menu or to make a selection while in
the Browse menu
Menu Navigation
Press the “SEEK ▲” button to scroll through the options in the Browse menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Display
Press the “DISP” button to toggle through the display modes (Track, Artist, etc).
Browse by Artist
Press the “TUNE ▼” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Press the “SEEK ▲” button until “AR:ARTIST” is displayed.
Press the “TUNE ▼” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Press the “Seek▲” button to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “TUNE ▼” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Press the “SEEK ▲” button to cycle through the albums.
Once the desired album is displayed,
Press the “TUNE ▼” button to select the desired album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Press the “SEEK ▲” button to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “TUNE ▼” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “HD-FM” is
displayed, press the “TUNE ▼” button to select it.
Tune Up
Press the “TUNE▲” button to manually tune up.
Seek Up
Press the “SEEK ▲” button to seek up to next available station.
Tune Down
Press the “TUNE ▼” button to manually tune down.
Seek Down
Press the “SEEK ▼” button to seek down to next available station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button scroll through the available sources. Once the
band you would like to select is displayed (“HD-AM” or “HD-FM”), press the “SEEK ▼”
button to select it.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Press “SEEK ▲” to
select the preset location (1-18) where you wish to store the preset. When the preset
location is displayed (for example PRE1) press the “TUNE▲” button to store it. The
screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Press the “SEEK ▲” button to scroll through the stored
preset stations. When the desired preset is displayed, press the “TUNE ▼” button to
select it.
Exit Menu
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Changing Display:
Press the “DISP” button to display artist and track information if the current HD Radio
station is transmitting that information.
Steering Wheel Controls
Press and hold “▲”to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources. Once
“SIRIUS” is displayed, press the “TUNE ▼” button to select it.
Channel Up
Press the “TUNE ▲” button to move up through the channels.
Channel Down
Press the “TUNE ▼” button to move down through the channels.
Category Up
Press the “SEEK ▲” button to move up through the categories.
Category Down
Press the “SEEK ▼” button to move down through the categories
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources. Once
“AUX” is displayed, press the “TUNE ▼” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “SAT” is
displayed, press the “TUNE ▼” button to select it.
12. Versa
Important Configuration Process
To ensure proper functionality of your PXAMG iPod Interface, you must first set the
“SEEK” button to the proper configuration. To do this you must first enter the Mode
Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on the
screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After 6
seconds the radio will time out and the “SEEK” button is now configured properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “IPOD” is
displayed, press the “TUNE ▼” button to select it.
Next Track
Press the “SEEK ▲” button TWICE to advance to the next track.
Previous Track
Press the “SEEK ▼” button TWICE to return to the previous track.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “TUNE ▼” button to enter the Browse menu or to make a selection while in
the Browse menu
Menu Navigation
Press the “SEEK ▲” button to scroll through the options in the Browse menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Changing Display
Press the “DISP” button to toggle through the display modes (Track, Artist, etc).
Download from Www.Somanuals.com. All Manuals Search And Download.
Browse by Artist
Press the “TUNE ▼” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Press the “SEEK ▲” button until “AR:ARTIST” is displayed.
Press the “TUNE ▼” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Press the “Seek▲” button to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “TUNE ▼” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Press the “SEEK ▲” button to cycle through the albums.
Once the desired album is displayed,
Press the “TUNE ▼” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Press the “SEEK ▲” button to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “TUNE ▼” button to select and play the desired song.
HD Radio Operation
Important Configuration Process
To ensure proper functionality of your HD tuner, you must first set the “TUNE” button
to the proper configuration. (Note: You do not have to repeat this process if you have
already done so for iPod control!) To do this you must first enter the Mode Select
Menu. Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SCAN” button until “TUNEREV” is displayed. After 6 seconds
the radio will time out and the “TUNE” button is now configured properly.
Entering Mode Select Menu (2004-2005)
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “HD-FM” is
displayed, press the “TUNE ▼” button to select it.
Tune Up
Press the “TUNE▲” button to manually tune up.
Seek Up
Press the “SEEK ▲” button TWICE to seek up to next available station.
Tune Down
Press the “TUNE ▼” button to manually tune down.
Download from Www.Somanuals.com. All Manuals Search And Download.
Seek Down
Press the “SEEK ▼” button TWICE to seek down to next available station.
Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources.
Once the band you would like to select is displayed (“HD-AM” or “HD-FM”), press the
“<<SEEK” button to select it.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Press “SEEK ▲” to
select the preset location (1-18) where you wish to store the preset. When the preset
location is displayed (for example PRE1) press “TUNE▲” button to store it. The screen
will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Press the “SEEK ▲” button to scroll through the stored preset
stations. When the desired preset is displayed, press the “TUNE ▼” button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Changing Display:
Press the “DISP” button to display artist and track information if the current HD Radio
station is transmitting that information.
Steering Wheel Controls
Press and hold “▲” to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources. Once
“SIRIUS” is displayed, press the “TUNE ▼” button to select it.
Channel Up
Press the “TUNE ▲” button to move up through the channels.
Channel Down
Press the “TUNE ▼” button to move down through the channels.
Category Up
Press the “SEEK ▲” button to move up through the categories.
Category Down
Press the “SEEK ▼” button to move down through the categories
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources. Once
“AUX” is displayed, press the “TUNE ▼” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources. Once
“SAT” is displayed, press the “TUNE ▼” button to select it.
13. G35 & G37
**IMPORTANT NOTE**
The 2007 G35 Coupe requires the PGHNI1 harness.
iPod Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
turn the rotary knob to scroll through the available sources. Once “IPOD” is displayed,
press the “▼ TRACK” button to select it.
Next Track
Turn the TUNE KNOB Clockwise to advance to the next track.
Previous Track
Turn the TUNE KNOB Counter-Clockwise to return to the previous track.
Download from Www.Somanuals.com. All Manuals Search And Download.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “▼ TRACK” button to enter the Browse menu or to make a selection while
in the Browse menu.
Menu Navigation
Turn the TUNE KNOB Clockwise to scroll through the options in the Browse menu.
Steering Wheel Controls
Press and hold “▲” or “▼” to change tracks.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Browse by Artist
Press the “▼ TRACK” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Turn the TUNE KNOB until “AR:ARTIST” is displayed.
Press the “▼ TRACK” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Turn the TUNE KNOB to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “▼ TRACK” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Turn the TUNE KNOB to cycle through the albums.
Once the desired album is displayed,
Press the “▼ TRACK” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Turn the TUNE KNOB to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “▼ TRACK” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
turn the rotary knob to scroll through the available sources. Once “HD-FM” is displayed,
press the “▼ TRACK” button to select it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tune Up
Press the “SEEK/CAT ▲” button to manually tune up.
Seek Up
Turn the TUNE KNOB Clockwise to seek up to next available station.
Tune Down
Press the “▼ TRACK” button to manually tune down.
Seek Down
Turn the TUNE KNOB Counter-Clockwise to seek down to next available station.
Changing Bands
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
turn the rotary knob to scroll through the available sources. Once the band you would
like to select is displayed (“HD-AM” or “HD-FM”), press the “▼ TRACK” button to select
it.
Store Presets
Press the “SCAN” button. Once in the Preset Menu turn the TUNE KNOB to select the
preset location (1-18) where you wish to store the preset. When the preset position is
displayed (for example PRE1) press “SEEK/CAT ▲” to store the preset into memory.
The screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button to enter the Preset Menu. Turn the TUNE KNOB to scroll
through the stored preset stations. When the desired preset is displayed, press the “▼
TRACK” button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to seek up or “▼” to seek down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“SIRIUS” is displayed, press the “<<SEEK” button to select it.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB counter-clockwise to move down through the channels.
Category Up
Press the “SEEK>>” button to move up through the categories.
Download from Www.Somanuals.com. All Manuals Search And Download.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the
screen. Immediately turn the rotary knob to scroll through the available
sources. Once “AUX” is displayed, press the “▼ TRACK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary knob to scroll through the available sources. Once “SAT”
is displayed, press the “▼ TRACK” button to select it.
14. M35/45
iPod Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
turn the rotary knob to scroll through the available sources. Once “IPOD” is displayed,
press the “<< SEEK” button to select it.
Next Track
Turn the TUNE KNOB Clockwise to advance to the next track.
Previous Track
Turn the TUNE KNOB Counter-Clockwise to return to the previous track.
Download from Www.Somanuals.com. All Manuals Search And Download.
Random Mode
Press and hold the “TRACK >>” button while listening to the iPod to toggle through the
random modes.
Entering Browse Menu / Select
Press the “<< SEEK” button to enter the Browse menu or to make a selection while in
the Browse menu.
Menu Navigation
Turn the TUNE KNOB Clockwise to scroll through the options in the Browse menu.
Steering Wheel Controls
Press and hold “▲” or “▼” to change tracks.
Exit Browse menu
Press and hold the “TRACK >>” button or wait 10 seconds and the Browse menu will
automatically exit.
Browse by Artist
Press the “<< SEEK” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Turn the TUNE KNOB until “AR:ARTIST” is displayed.
Press the “<< SEEK” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Turn the TUNE KNOB to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “<< SEEK” button to select the artist and display the albums by that artist.
TheAlbums from the selectedArtist will be displayed one at a time in alphabetical order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Turn the TUNE KNOB to cycle through the albums.
Once the desired album is displayed,
Press the “<< SEEK” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Turn the TUNE KNOB to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “<< SEEK” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
HD Radio Operation
Entering Mode Select Menu
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
turn the rotary knob to scroll through the available sources. Once “HD-FM” is displayed,
press the “<< SEEK” button to select it.
Tune Up
Press the “TRACK >>” button to manually tune up.
Download from Www.Somanuals.com. All Manuals Search And Download.
Seek Up
Turn the Tuning Knob Clockwise to seek up to next available station.
Tune Down
Press the “<< SEEK” button to manually tune down.
Seek Down
Turn the TUNE KNOB Counter-Clockwise to seek down to next available station.
Changing Bands
Pressthe“RADIO”buttonafewtimesuntil“SAT”isdisplayedonthescreen. Immediately
turn the rotary knob to scroll through the available sources. Once the band you would
like to select is displayed (“HD-AM” or “HD-FM”), press the “<< SEEK” button to select
it.
Store Presets
Press and hold the “TRACK >>” button. Once in the Preset Menu turn the TUNE KNOB
to select the preset location (1-18) where you wish to store the preset. When the preset
position is displayed (for example PRE1) press “TRACK >>” to store the preset into
memory. The screen will display “PR SAVED” and your preset has been stored into
memory.
Recall Presets
Press and hold the “TRACK >>” button to enter the Preset Menu. Turn theTUNE KNOB
to scroll through the stored preset stations. When the desired preset is displayed, press
the “<< SEEK” button to select it.
Exit menus
Press and hold the “TRACK >>” button to exit the Preset Menu and continue playing the
current station. “EXIT” will be displayed when the button is pressed. You can also wait
the allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to seek up or “▼” to seek down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“SIRIUS” is displayed, press the “<<SEEK” button to select it.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB counter-clockwise to move down through the channels.
Category Up
Press the “SEEK>>” button to move up through the categories.
Download from Www.Somanuals.com. All Manuals Search And Download.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary knob to scroll through the available sources. Once “AUX”
is displayed, press the “<<SEEK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary knob to scroll through the available sources. Once “SAT”
is displayed, press the “<<SEEK” button to select it.
15. QX56
iPod Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the TUNE KNOB to scroll through the available sources. Once
“IPOD” is displayed, press the “<<SEEK” button to select it.
Next Track
Turn the TUNE KNOB clockwise to advance to the next track.
Previous Track
Turn the TUNE KNOB counter clockwise to return to the previous track.
Download from Www.Somanuals.com. All Manuals Search And Download.
Random Mode
Press the “SCAN” button while listening to the iPod to toggle through the random
modes.
Entering Browse Menu / Select
Press the “<<SEEK” button to enter the Browse menu or to make a selection while in
the Browse menu.
Menu Navigation
Turn the TUNE KNOB clockwise to scroll through the options in the Browse menu.
Steering Wheel Controls
Press and hold “▲” to enter the Browse menu.
Exit Browse menu
Press the “SCAN” button or wait 10 seconds and the Browse menu will automatically
exit.
Browse by Artist
Press the “<<SEEK” button to enter the Browse menu.
”PL:LIST” will appear on your display.
Turn the TUNE KNOB until “AR:ARTIST” is displayed.
Press the “<<SEEK” button to select Browse by Artist.
The list ofArtists on your iPod will be displayed one at a time in alphabetical order. “AR”
will be displayed in front of the artist’s name to indicate that you are searching for an
artist.
Turn the TUNE KNOB to cycle through the artists.
When the desired artist is displayed on the radio,
Press the “<<SEEK” button to select the artist and display the albums by that artist.
The Albums from the selected Artist will be displayed one at a time in alphabetical
order.
“AL” will be displayed in front of the name of the album to indicate you are searching
for an album.
Turn the TUNE KNOB to cycle through the albums.
Once the desired album is displayed,
Press the “<<SEEK” button to select the desired Album.
The first song in the album will be displayed. “TR” will be displayed in front of the song
title to indicate that a “track” or song title is being displayed.
Turn the TUNE KNOB to cycle through the songs in the selected album.
Songs are listed in the order in which they appear in the album, not alphabetically.
Once the radio displays the name of the desired song
Press the “<<SEEK” button to select and play the desired song.
The display will automatically change to display and scroll the title of the chosen song.
Download from Www.Somanuals.com. All Manuals Search And Download.
HD Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the TUNE KNOB to scroll through the available sources. Once
“HD-FM” is displayed, press the “<<SEEK” button to select it.
Tune Up
Press the “SEEK >>” button to manually tune up.
Seek Up
Turn the TUNE KNOB Clockwise to seek up to next available station.
Tune Down
Press the “<<SEEK” button to manually tune down.
Seek Down
Turn the TUNE KNOB Counter-clockwise to seek down to next available station.
Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the TUNE KNOB to scroll through the available sources. Once the
band you would like to select is displayed (“HD-AM” or “HD-FM”), press the “<<SEEK”
button to select it.
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Turn the TUNE KNOB to
select the preset location (1-18) where you wish to store the preset. When the preset
location is displayed (for example PRE1) press “SEEK>>” to store it. The screen will
display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Turn the TUNE KNOB to scroll through the stored preset
stations. When the desired preset is displayed, press the “<<SEEK” button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once
“SIRIUS” is displayed, press the “<<SEEK” button to select it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Up
Turn the TUNE KNOB clockwise to move up through the channels.
Channel Down
Turn the TUNE KNOB counter-clockwise to move down through the channels.
Category Up
Press the “SEEK>>” button to move up through the categories.
Category Down
Press the “<<SEEK” button to move down through the categories
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the TUNE KNOB to scroll through the available sources. Once
“AUX” is displayed, press the “<<SEEK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the TUNE KNOB to scroll through the available sources. Once “SAT”
is displayed, press the “<<SEEK” button to select it.
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Troubleshooting
Symptom
Cause
Remedy
Radio shows “DEV Media Gateway
This only occurs the first time the
INIT”
device is initializing. Media Gateway is powered on. Wait a
few minutes, cycle ignition off and on
then enter SAT mode.
The track forward
command makes
the tracks go
backwards on the
iPod.
The seek and tune
buttons have not
been set to the
Please see the Important
Configuration Process in the iPod
operation section that applies to your
proper configuration. specific vehicle.
The seek and tune The seek and tune
Please see the Important
buttons operate
backwards.
buttons have not
been set to the
Configuration Process in the HD Radio
operation section that applies to your
proper configuration. specific vehicle.
When trying to test Radio is not
operation the radio grounded
does not power up.
Nissan radios get their ground from
the mounting screws. Insert the radio
back into the dash and tighten down
a bolt to provide a solid ground to the
radio.
Radio shows iPod iPod cable is not
Verify the docking cable is connected
not connected.
connected to iPod or to the Media Gateway and the iPod.
Gateway.
I can not correctly
control the iPod
through the radio.
The iPod firmware
may be out of date.
Update the iPod firmware for free at
I have updated
Sometimes the iPod Press and hold the center click and
my iPods firmware needs to be reset.
and still have
menu buttons for 10 seconds. This
will re-boot the iPod. YOU WILL NOT
LOSE MUSIC on the iPod by doing
this reset.
control issues.
I don’t see iPod
artist or song
The radio is
Press the display button to see the
displaying a different correct text field.
information on the text field.
screen.
I can’t use my
iPod’s click wheel
to select music.
The iPod is in
Press the Aux/Sat button and select
the AUX source to control the iPod
from the click wheel.
external control
mode. This allows
text to be displayed
on the radio screen
The Media
The HD tuner
HDRT must be connected before the
PXAMG is plugged in. Disconnect the
PXAMG from the vehicle harness for
at least 5 minutes. Verify the 8 pin DIN
HDRT cable is securely connected
at both ends before reconnecting the
vehicle harness.
Gateway does not was not properly
recognize the HD
tuner (HDRT).
connected when
the PXAMG was
first connected and
initialized.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (cont)
Symptom
Cause
Remedy
When I listen to
the factory AM or
FM radio there
is only static, no
audio.
Factory antenna
cable is connected
to the HD radio
tuner.
Use Media Gateway to access
HD radio source. This will provide
all AM and FM reception for your
vehicle.
No AM or FM
Factory antenna
Remove the factory antenna plug
from the factory radio and connect
reception using the cable is not
HD radio source.
connected to the HD to the HDRT module. **NOTE
radio tuner (HDRT). - some vehicles need to use an
aftermarket antenna adapter to
make this connection.
HD radio station
The HD tuner is
This is expected performance.
The digital HD radio playback
will resume in areas of higher
broadcast signal strength.
quality fluctuates
temporarily losing
or is lost randomly. reception of the
Digital HD radio
broadcast signal.
The Seek or Tune The seek and tune
Forward command buttons have not
Please see the Important
Configuration Process in the
HD Radio operation section that
is actually doing
Seek or Tune
reverse.
been set to the
proper configuration. applies to your specific vehicle.
The Seek button
is doing Tune
commands and
the Tune button
is doing Seek
commands.
The dipswitches
have not been set
properly.
Please see the Dipswitch Setting
and Dipswitch Overview section.
Download from Www.Somanuals.com. All Manuals Search And Download.
For Best Performance Have It
Professionally Installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
|