Kramer Electronics TV Cables TP 122N User Manual

KRAMER ELECTRONICS LTD.  
USER MANUAL  
MODEL:  
TP-122N  
XGA/Audio Line Receiver  
P/N: 2900-300042 Rev 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been  
providing a world of unique, creative, and affordable solutions to the vast range of  
problems that confront the video, audio, presentation, and broadcasting  
professional on a daily basis. In recent years, we have redesigned and upgraded  
most of our line, making the best even better!  
Our 1,000-plus different models now appear in 11 groups that are clearly defined by  
function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix  
Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;  
GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;  
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;  
GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and  
GROUP 11: Sierra Products.  
Congratulations on purchasing your Kramer TP-122N XGA/Audio Line Receiver.  
This product is ideal for:  
Presentation and multimedia applications  
Long range graphics distribution for schools, hospitals, security, and stores  
TP-122N - Introduction  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Getting Started  
We recommend that you:  
Unpack the equipment carefully and save the original box and packaging  
materials for possible future shipment  
Review the contents of this user manual  
Use Kramer high performance high resolution cables  
Go to http://www.kramerelectronics.com to check for up-to-date user  
manuals, application programs, and to check if firmware upgrades are  
available (where appropriate).  
i
2.1  
Achieving the Best Performance  
To achieve the best performance:  
Use only good quality connection cables to avoid interference, deterioration  
in signal quality due to poor matching, and elevated noise levels (often  
associated with low quality cables)  
Avoid interference from neighboring electrical appliances that may adversely  
influence signal quality  
Position your Kramer TP-122N away from moisture, excessive sunlight and  
dust  
Caution:  
No operator serviceable parts inside the unit  
!
Warning: Use only the Kramer Electronics input power wall  
adapter that is provided with the unit  
Warning: Disconnect the power and unplug the unit from the wall  
before installing  
2
TP-122N - Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Overview  
The Kramer TP-122N is an XGA/audio line receiver that receives the coded CAT 5  
signal transmitted by a TP-121EDID XGA / Audio Line Transmitter, for example,  
decodes it and converts it to XGA, stereo analog and S/PDIF digital audio outputs.  
The TP-122N, with the TP-121EDID transmitter, allows an operation range of more  
than 300ft (more than 100m) over standard CAT 5 cable.  
The TP-122N:  
Is HDTV Compatible  
Has a maximum resolution of WUXGA and 1080p  
Includes EQ. and level controls  
Can power or be powered by the transmitter over the same CAT 5 cable  
when the devices are within 50m (150ft) of each other  
Is 12V DC fed  
The TP-122N is housed in compact TOOLS® enclosure where three units can be  
rack mounted side-by-side in a 1U rack space with the optional RK-3T rack  
adapter.  
3.1  
Shielded Twisted Pair (STP) / Unshielded Twisted Pair  
(UTP)  
We recommend that you use Shielded Twisted Pair (STP) cable, and stress that  
the compliance to electromagnetic interference was tested using STP cable. There  
are different levels of STP cable available, and we advise you to use the best  
quality STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is  
intended for analog signals where skewing is not an issue.  
In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-free  
cable, Kramer BC-XTP, may be advantageous, and UTP cable might also be  
preferable for long range applications. In any event when using UTP cable, it is  
advisable to ensure that the cable is installed far away from electric cables, motors  
and so on, which are prone to create electrical interference.  
TP-122N - Overview  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3.2  
About the Power Connect™ Feature  
The Power Connect feature applies as long as the cable can carry power. This  
feature is available when using STP cable and the distance does not exceed 50m  
on standard CAT 5 cable. For longer distances, heavy gauge cable should be used  
(CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the  
power at these distances). For units which are connected via RJ-45 connectors,  
make sure that the shield of the STP cable is connected to the metal casing of the  
connectors on both ends of the cable. For units which are connected via terminal  
block connectors, the shield of the STP cable must be connected to a ground  
terminal on the units at both ends (use the ground terminal of the power supply  
connection if necessary).  
For a CAT 5 cable exceeding a distance of 50m, separate power supplies should  
be connected to the transmitter and to the receiver simultaneously.  
4
TP-122N - Overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3.3  
Defining the TP-122N XGA/Audio Line Receiver  
This section defines the TP-122N.  
Figure 1: TP-122N XGA/Audio Line Receiver  
TP-122N - Overview  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
#
Feature  
Function  
1
12V DC  
+12V DC connector for powering the unit  
2
3
S/PDIF RCA Connector Connects to the digital audio acceptor  
AUDIO  
OUT  
ANALOG 3.5mm mini  
Connects to the analog audio acceptor  
Jack  
4
LINE IN RJ-45 Connector  
Connects to the TP-121EDID or the TP-104 (that  
does not accept the audio signals)  
Connect via a UTP CAT 5 cable with RJ-45 connectors  
at both ends (the PINOUT is defined in Section 4.1)  
5
XGA OUT 15-pin HD (F)  
Connects to the XGA acceptor  
Connector  
6
7
LINK LED  
Illuminates when receiving the correct input signal  
Adjusts the output signal level  
LEVEL Trimmer  
Use a screwdriver to carefully rotate the trimmer,  
adjusting the appropriate level  
8
EQ. Trimmer  
Adjusts the cable compensation equalization level  
Degradation and VGA/XGA signal loss can result from  
using long cables (due to stray capacitance), sometimes  
leading to a total loss of sharpness in high-resolution  
signals  
Use a screwdriver to carefully rotate the trimmer,  
adjusting the appropriate level  
9
ON LED  
Illuminates when receiving power  
6
TP-122N - Overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Connecting the TP-122N XGA/Audio Line  
Receiver  
You can use the TP-121EDID and TP-122N to configure an XGA/Audio Line-  
to-Twisted Pair Transmitter and Receiver system.  
To connect the TP-121EDID XGA/Audio Line Transmitter with the TP-122N  
XGA/Audio Line Receiver, as the example in Figure 2 illustrates, do the following:  
1. On the TP-121EDID, connect the XGA source (for example, a laptop’s  
graphics card) to the XGA INPUT 15-pin HD (F) connector and an audio  
source to the AUDIO IN 3.5mm mini jack, for example, using a Kramer  
C-GMA/GMA cable (VGA 15-pin HD (M) +Audio jack to VGA 15-pin HD (M)  
+Audio jack).  
2. On the TP-122N, connect the XGA OUT 15-pin HD (F) connector to the  
XGA acceptor (for example, a display), and connect the AUDIO OUT S/PDIF  
RCA connector to the digital audio acceptor (for example, an AV Receiver),  
and the ANALOG 3.5mm mini jack to the analog audio acceptor (for  
example, a stereo audio recorder).  
3. Connect the LINE OUTPUT RJ-45 connector on the TP-121EDID to the  
LINE IN RJ-45 connector on the TP-122N, via UTP cabling (with a range of  
more than 300ft (>100m)), see Section 4.1.  
4. Connect the 12V DC power adapter to the power socket and connect the  
adapter to the mains electricity on both the TP-121EDID and the TP-122N.  
The signal from the XGA source is transmitted via CAT 5 cable, decoded  
and converted at the XGA OUT 15-pin HD (F) connector to the XGA  
acceptor.  
If you cannot connect the power to both the TP-121EDID and TP-122N, you can just  
connect the power to the TP-122N  
5. On the TP-122N adjust the video output signal level and/or cable  
compensation equalization level, if required.  
Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level  
TP-122N - Connecting the TP-122N XGA/Audio Line Receiver  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Figure 2: Connecting the XGA/Audio Line Transmitter/Receiver System  
8
TP-122N - Connecting the TP-122N XGA/Audio Line Receiver  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4.1  
Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors  
EIA /TIA 568A  
PIN Wire Color  
EIA /TIA 568B  
PIN  
Wire Color  
Orange/White  
Orange  
1
2
3
4
5
6
7
8
Green/White  
Green  
1
2
3
4
5
6
7
8
Orange/White  
Blue  
Green/White  
Blue  
Blue/White  
Orange  
Blue/White  
Green  
Brown/White  
Brown  
Brown/White  
Brown  
Pair 1  
Pair 2  
Pair 3  
Pair 4  
4 and 5  
3 and 6  
1 and 2  
7 and 8  
Pair 1 4 and 5  
Pair 2 1 and 2  
Pair 3 3 and 6  
Pair 4 7 and 8  
Figure 3: CAT 5 PINOUT  
TP-122N - Connecting the TP-122N XGA/Audio Line Receiver  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
Technical Specifications  
INPUT:  
1 RJ-45 LINE IN connector  
OUTPUTS:  
VIDEO: 1 VGA/UXGA on a 15-pin HD connector  
AUDIO: 1 audio S/PDIF RCA connector; 1 audio ANALOG 3.5mm  
mini jack  
MAX. OUTPUT LEVEL:  
CONTROLS:  
VIDEO: 1V; AUDIO: 2.5V  
Level: –7.5dB to +4.4dB, EQ.: 0dB to +33dBm (130m) @ 50MHz  
AUDIO: 20Hz to 20kHz @0.5dB  
BANDWIDTH (-3dB):  
For the Transmitter/Receiver pair  
S/N RATIO:  
VIDEO: 58dB unweighted, 68.3dB @5MHz weighted  
AUDIO: <–80dB  
TOTAL GAIN:  
COUPLING:  
TND+N:  
AUDIO: Analog/analog: 0dB; Analog/SPDIF: –12dBFS  
AC  
AUDIO: <0.01%  
12V DC 190mA (TP-122N)  
POWER SOURCE:  
12V DC 540mA (TP-121EDID/TP-122N pair when powered from  
TP-121EDID via Power Connect)  
12V DC 390mA (TP-121EDID/TP-122N pair when powered from  
TP-122N via Power Connect)  
DIMENSIONS:  
WEIGHT:  
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95") W, D, H  
0.3kg (0.67lbs) approx.  
ACCESSORIES:  
OPTIONS:  
Power supply  
RK-3T 19” rack adapter, C-GMA/GMA cable (VGA 15-pin HD (M)  
+Audio jack to VGA 15-pin HD (M) +Audio jack)  
Specifications are subject to change without notice  
Go to our Web site at http://www.kramerelectronics.com to access the list of resolutions  
10  
TP-122N - Technical Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
LIMITED WARRANTY  
We warrant this product free from defects in materialand workmanship under the following terms.  
HOW LONG IS THE WARRANTY  
Labor and parts are warranted for seven years from the date of the first customer purchase.  
WHO IS PROTECTED?  
Only the first purchase customer may enforce this warranty.  
WHATIS COVEREDANDWHATIS NOT COVERED  
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not  
covered by thewarranty:  
1. Any product which is not distributed by us or which is not purchased from an authorized Kramer dealer. If you are  
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site  
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID  
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.  
3. Damage, deterioration ormalfunctionresultingfrom:  
i) Accident, misuse, abuse, neglect, fire, water, lightningorotheracts of nature  
ii) Product modification, orfailure to follow instructions supplied withtheproduct  
iii) Repair orattemptedrepairby anyone not authorized by Kramer  
iv) Any shipment of theproduct (claims must bepresentedtothe carrier)  
v) Removal orinstallation of theproduct  
vi) Any other cause, which does not relate to aproduct defect  
vii) Cartons, equipment enclosures, cables or accessories used inconjunction withtheproduct  
WHATWE WILLPAYFORANDWHATWE WILLNOT PAY FOR  
We will pay labor andmaterialexpenses for covered items. We willnot pay for the following:  
1. Removalor installations charges.  
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are  
theresponsibility of the Kramer dealer from whom theproduct was purchased.  
3. Shipping charges.  
HOW YOU CAN GET WARRANTY SERVICE  
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.  
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of  
warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a  
contact name, company, address, and a description of the problem(s).  
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.  
LIMITATIONOFIMPLIEDWARRANTIES  
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration  
to the length of this warranty.  
EXCLUSIONOF DAMAGES  
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer  
shallnot be liable for:  
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the  
product, loss of time, commercialloss; or:  
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on  
how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations and exclusions may not apply to you.  
This warranty gives you specific legal rights, andyou may also have otherrights, which vary from place toplace.  
NOTE:Allproducts returned to Kramerforservice must haveprior approval.This may beobtained from your dealer.  
This equipment has been tested to determine compliancewiththerequirements of:  
EN-50081:  
"Electromagnetic compatibility (EMC);  
generic emission standard.  
Part 1: Residential, commercialand light industry"  
"Electromagnetic compatibility (EMC) generic immunity standard.  
Part 1: Residential, commercialand light industry environment".  
FCC* Rules and Regulations:  
EN-50082:  
CFR-47:  
Part 15: “Radio frequency devices  
Subpart B Unintentional radiators”  
CAUTION!  
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or  
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the  
equipment.  
Use the suppliedDC powersupply to feedpower to the machine.  
Pleaseuse recommendedinterconnectioncables toconnect the machine to othercomponents.  
* FCC andCEapprovedusing STPcable(for twisted pair products)  
TP-122N  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For the latest information on our products and a list of Kramer distributors,  
visit our Web site where updates to this user manual may be found.  
We welcome your questions, comments, and feedback.  
SAFETY WARNING  
Disconnect the unit from the power  
supply before opening and servicing  
!
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Refrigerator BAN 134 NF S User Manual
Invacare Mobility Aid 00 313 User Manual
JVC Car Speaker CS D3000 User Manual
JVC VCR HR E539EE User Manual
Kenmore Range 7907865 User Manual
KitchenAid Cooktop W10271686B User Manual
Kodak Battery Charger K6200 User Manual
Kodak Film Camera 5219 User Manual
Korg Music Mixer ZERO4 User Manual
Kramer Electronics Camcorder VS 1616SDI User Manual