Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
VS-66H3
6x6 HDMI Matrix Switcher
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Tables
ii
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast
range of problems that confront the video, audio, presentation and
broadcasting professional on a daily basis. In recent years we have
redesigned and upgraded most of our line, making the best even better! Our
defined by function.
Congratulations on purchasing your Kramer VS-66H3 6x6 HDMI Matrix
Switcher.
The VS-66H3 is ideal for conference room presentations and advertising
applications as well as for rental and staging.
Each package includes the following items:
•
•
•
•
VS-66H3 6x6 HDMI Matrix Switcher
Power cord
Windows®-based Ethernet Configuration Manager and Virtual Serial
Port Manager
•
•
Kramer RC-IR3 Infrared Remote Control Transmitter (including the
This user manual3
2
Getting Started
We recommend that you:
•
Unpack the equipment carefully and save the original box and
packaging materials for possible future shipment
•
•
Review the contents of this user manual
Use Kramer high performance high resolution cables4
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products
2 Downloadable from http://www.kramerelectronics.com
3 Download up-to-date Kramer user manuals from http://www.kramerelectronics.com
4 The complete list of Kramer cables is available from http://www.kramerelectronics.com
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
3
Overview
The VS-66H3 is a high quality 6 x 6 matrix switcher for HDMI signals that
fits into one vertical space of a standard 19” professional rack enclosure.
In particular, the VS-66H3 features:
•
•
•
Up to 2.25Gbps bandwidth per graphic channel1
Support for HDCP (High Definition Digital Content Protection)
HDMI Support – HDMI (V.1.4 with 3D, Deep Color, x.v.Color™,
Lip Sync)
•
•
3D Pass-Through
I-EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent
EDID handling & processing algorithm ensures Plug and Play
operation for HDMI systems
•
•
•
Kramer reKlocking™ & Equalization Technology that rebuilds the
digital signal to travel longer distances
A LOCK button to prevent unwanted tampering with the buttons on
the front panel
Preset memory locations for quick access to common configurations
You can control the VS-66H3 using the front panel buttons, or remotely via:
•
RS-232 serial commands transmitted by a PC, touch screen system or
other serial controller
•
•
The Kramer infrared remote control transmitter
A PC connected to the Ethernet port on the device via a LAN
3.1 Defining the EDID
provided by a display to describe its capabilities to an HDMI source. The
EDID enables the VS-66H3 to “know” what kind of monitor is connected to
the output. The EDID includes the manufacturer’s name, the product type,
the timing data supported by the display, the display size, luminance data
details on how to acquire the EDID.
1 Suitable for resolutions up to UXGA at 60Hz, and for all HD resolutions
2 Defined by a standard published by the Video Electronics Standards Association (VESA)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
3.2 About HDMI
High-Definition Multimedia Interface (HDMI) is an uncompressed
home cinema industry. It delivers the highest high-definition image and
sound quality. Note that Kramer Electronics Limited is an HDMI Adopter
and an HDCP Licensee.
In particular, HDMI:
•
a set-top box, DVD player, or A/V receiver and video monitor, such
as a digital flat LCD / plasma television (DTV), over a single
•
•
Supports standard, enhanced, high-definition video, and multi-
Transmits all ATSC HDTV standards and supports 8-channel digital
audio, with bandwidth to spare to accommodate future enhancements
and requirements
•
Benefits consumers by providing superior, uncompressed digital
•
•
Is backward-compatible with DVI (Digital Visual Interface)
Supports CEC, two-way communication between the video source
(such as a DVD player) and the digital television, enabling new
functionality such as automatic configuration and one-button play
HDMI has the capacity to support existing high-definition video formats
(720p, 1080i, and 1080p, 2K and 4K), standard definition formats such as
NTSC or PAL, as well as 480p and 576.
3.3 About HDCP
digital video and audio signals transmitted over DVI or HDMI connections
between two HDCP-enabled devices to eliminate the reproduction of
1 Ensuring an all-digital rendering of video without the losses associated with analog interfaces and their unnecessary digital-
to-analog conversions
2 With video and multi-channel audio combined into a single cable, the cost, complexity, and confusion of multiple cables
currently used in A/V systems is reduced
3 HDMI technology has been designed to use standard copper cable construction at up to 15m
4 HDMI supports multiple audio formats, from standard stereo to multi-channel surround-sound. HDMI has the capacity to
support Dolby 5.1 audio and high-resolution audio formats
5 HDMI provides the quality and functionality of a digital interface while also supporting uncompressed video formats in a
simple, cost-effective manner
6 Developed by Intel
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Defining the VS-66H3 6x6 HDMI Matrix Switcher
copyrighted material. To protect copyright holders (such as movie studios)
from having their programs copied and shared, the HDCP standard provides
for the secure and encrypted transmission of digital signals.
3.4 Recommendations for Best Performance
To achieve the best performance:
•
•
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer
VS-66H3 away from moisture, excessive sunlight and dust
4
Defining the VS-66H3 6x6 HDMI Matrix Switcher
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Defining the VS-66H3 6x6 HDMI Matrix Switcher
Figure 1: VS-66H3 6x6 HDMI Matrix Switcher Front Panel
Table 1: VS-66H3 6x6 HDMI Matrix Switcher Front Panel Features
#
Feature
Function
1
2
3
4
5
IR LED
Lights yellow when receiving signals from the infrared remote control transmitter
Signal receiver for the Infrared remote control transmitter
Lights when the device is turned on
IR Receiver
POWER LED
ALL Button
OFF Button
Press followed by an input button to connect the selected input to all outputs1
Press after pressing an output button to disconnect the selected output from the inputs.
To disconnect all the outputs, press ALL followed by OFF
6
7
8
STO Button
RCL Button
LOCK Button
Press and hold to toggle the locking/release of the front panel buttons.
9
EDID Button
10
11
12
IN (1 to 6)
Press to select the input to switch after selecting an output
OUT (1 to 6) Press to select an output to switch followed by an input
INPUT 7-segment LED Display
Displays the input currently switched to the output which is marked above each input
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Defining the VS-66H3 6x6 HDMI Matrix Switcher
Figure 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel
Table 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel Features
#
Feature
Function
13
OUTPUT HDMI Connectors (1 to 6)
INPUT HDMI Connectors (1 to 6)
RS-232 9-pin D-sub Serial Port Connector
ETHERNET RJ-45 Connector
ETH RESET Button
Connect to up to 6 HDMI acceptors
Connect to up to 6 HDMI sources
Connect to a PC/serial controller
Connect to a PC via a LAN
14
15
16
17
18
Press to reset to the factory default IP parameters1
Connect to an external IR receiver for controlling the device via an IR remote controller (see
19
20
21
Mains Power Connector
Mains Power Fuse
Connect to the mains power
Fuse for protecting the device
Switch for turning the device on or off
Mains Power Switch
1 First turn the VS-66H3 off and then turn it on again while pressing the ETH RESET button. The device will power up and load its memory with the factory default IP parameters
2 Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into this opening
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Defining the VS-66H3 6x6 HDMI Matrix Switcher
4.1 Using the IR Transmitter
You can use the RC-IR3 IR transmitter to control the device via the built-in
IR receiver on the front panel or, instead, via an optional external IR
from the device. This distance can be extended to up to 60m (approx 200ft)
when used with three extension cables2
Before using the external IR receiver, be sure to arrange for your Kramer
dealer to insert the internal IR connection cable
3 with the 3.5mm jack that
F
fits into the REMOTE IR opening on the rear panel. Connect the external IR
receiver to the REMOTE IR 3.5mm jack.
1 Model: C-A35M/IRR-50
2 Model: C-A35M/A35F-50
3 P/N: 505-70434010-S
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the VS-66H3 6x6 HDMI Matrix Switcher
6
Connecting the VS-66H3 6x6 HDMI Matrix Switcher
IN HDMI connectors.
(for example, LCD displays with built-in speakers).
3. If required, connect a PC/controller to the RS-232 port (see
Figure 3: Connecting the VS-66H3 6x6 HDMI Matrix Switcher
1 Switch off the power on each device before connecting it to your VS-66H3. After connecting your VS-66H3, switch on its
power and then switch on the power on each device
2 You do not have to connect all the sources
3 You do not have to connect all the outputs
10
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the VS-66H3 6x6 HDMI Matrix Switcher
7
Operating the VS-66H3 6x6 HDMI Matrix Switcher
This section describes:
•
•
•
•
•
•
7.1 Switching an Input to an Output
To switch an input to an output:
•
Press an output button followed by an input button to switch the
selected input to the selected output
7.2 Acquiring the EDID
You can acquire the EDID from any of the following:
•
•
•
Note: Attempting to acquire the EDID from an output that does not have a
display device connected to it results in the default EDID being acquired.
7.2.1 Acquiring the EDID from One Output
Note: You can assign the EDID from one output to any or all of the six
inputs.
To acquire the EDID from a display device connected to one of the
outputs:
1. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
2. Press the input button to which the EDID will be copied.
The selected input number flashes on the display.
3. Select the output from which the EDID is to be acquired.
4. Press the EDID button.
The EDID is stored when the display returns to normal and the EDID
and STO buttons stop flashing.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the VS-66H3 6x6 HDMI Matrix Switcher
7.2.2 Acquiring the EDID from Several Outputs
To acquire the EDID from several outputs (for example, OUT 1 to IN 1
and OUT 6 to IN 3):
1. Connect the display devices to the outputs from which you want to
acquire the EDIDs.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
3. Press the input button to which the EDID will be copied (for example,
IN 1).
The selected input number flashes on the display.
4. Select the output from which the EDID will be acquired (for example,
OUT 1).
5. Press the IN 1 button.
The IN 1 number stops flashing.
6. Press the next input button to which the EDID will be copied (for
example, IN 3).
The selected input number flashes on the display.
7. Select the output from which the EDID will be acquired (for example,
OUT 6).
8. Press the IN 3 button.
The IN 3 number stops flashing.
9. Press the input buttons to which you want to copy the EDID (for
example, IN 1 and IN 3).
10. Make sure that the relevant input numbers flash on the display.
11. Press the EDID button.
The process is complete when the display returns to normal.
7.2.3 Acquiring the Default EDID
To store the default EDID on a selected input (for example, Input 2):
1. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
2. Press the input (for example, Input 2) to which the EDID is to be
copied.
The selected input number flashes on the display.
3. Press the OFF button until "0" (zero) appears on the display.
4. Press the EDID button.
When the display returns to normal, the default EDID is stored on the
selected input.
12
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the VS-66H3 6x6 HDMI Matrix Switcher
7.3 Storing and Recalling a Switching Setting from a Preset
The STO and RCL buttons are used to store and recall up to 12 setups
which are assigned using the 6 output (preset 1 to 6) and 6 input (preset 7 to
12) buttons.
1. Configure the switching as required for the preset (for example, Input 4
to Output 3).
2. Press the STO button.
The STO button flashes.
3. Select an OUT or IN SELECT button to store the device setting (for
example, IN 4 for preset 10).
The STO button stops flashing.
To recall a preset (for example, preset 10):
1. Press the RCL button.
The RCL button flashes.
2. Press the relevant OUT or IN button that stored the preset (for
example, IN 4/preset 10).
3. Press the LOCK button to recall the stored preset.
The RCL button stops flashing.
7.4 Resetting the VS-66H3 6x6 HDMI Matrix Switcher’s IP
Parameters
Note: This procedure resets only the IP related parameters. All switching
and preset values remain unchanged.
•
Press and hold the ETH Reset button on the rear panel while
powering up the device
7.5 Connecting to the VS-66H3 6x6 HDMI Matrix Switcher via
RS-232
You can connect to the VS-66H3 via an RS-232 connection using, for
example, a PC. Note that a null-modem adapter/connection is not required.
1 You can set each of the inputs/outputs independently; you are not limited to a single input/output combination
2 You have to press the LOCK button within 10 seconds or the procedure automatically times out
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the VS-66H3 6x6 HDMI Matrix Switcher
To connect to the product via RS-232:
•
Connect the RS-232 9-pin D-sub on the rear panel of the VS-66H3
via a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5
to pin 5 need to be connected) to the RS-232 9-pin D-sub port on your
PC
7.6 Connecting to the VS-66H3 6x6 HDMI Matrix Switcher via
Ethernet
You can connect the VS-66H3 via the Ethernet, using a crossover cable (see
7.6.1 Connecting the Ethernet Port directly to a PC
You can connect the Ethernet port of the VS-66H3 to the Ethernet port on
your PC via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address of the VS-66H3 during the initial configuration
After connecting the Ethernet port, configure your PC as follows:
1. On your desktop, right-click the My Network Places icon.
2. Select Properties.
3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties Button
1 After connecting the Ethernet port, you have to install and configure your Ethernet Port. For detailed instructions, see the
“Ethernet Configuration (FC-11) guide.pdf” file in the technical support section at http://www.kramerelectronics.com
14
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the VS-66H3 6x6 HDMI Matrix Switcher
Figure 4: Local Area Connection Properties Window
6. Select Use the following IP Address, and fill in the details as shown in
7. Click OK.
Figure 5: Internet Protocol (TCP/IP) Properties Window
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading the Firmware
7.6.2 Connecting the Ethernet Port via a Network Hub
You can connect the Ethernet port of the VS-66H3 to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45
connectors.
8
9
Upgrading the Firmware
For instructions on upgrading the firmware see the “STC Firmware
Upgrade” document.
Technical Specifications
INPUTS:
OUTPUTS:
6 HDMI Connectors
6 HDMI Connectors
BANDWIDTH:
2.25Gbps bandwidth per graphic channel
HDMI and HDCP
COMPLIANCE WITH
HDMI STANDARD:
RESOLUTION:
POWER SOURCE:
CONTROLS:
DIMENSIONS:
WEIGHT:
Up to UXGA; 1080p
100−240V AC, 50/60Hz, 33VA
Front panel buttons, infrared remote control transmitter, RS-232, Ethernet
19” x 10.9” x 1U (W, D, H)
2.1kg (4.6lbs) approx.
ACCESSORIES:
OPTIONS:
Power cord, IR transmitter, rack ”ears”
10 Default EDID
Monitor
Model name............... VS-66H
Manufacturer............. KRM
Plug and Play ID......... KRM0200
Serial number............ 1
Manufacture date......... 2010, ISO week 24
-------------------------
EDID revision............ 1.3
Input signal type........ Digital (DVI)
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 700 x 390 mm (31.5 in)
Power management......... Not supported
Extension blocs.......... 1 (CEA-EXT)
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the C-HM/HM series, the C-HM/DM series and/or our HDMI over fiber optics
C-FOHM/FOHM series
16
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Default EDID
-------------------------
DDC/CI................... Not supported
Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.341
Green chromaticity....... Gx 0.286 - Gy 0.610
Blue chromaticity........ Bx 0.146 - By 0.069
White point (default).... Wx 0.284 - Wy 0.293
Additional descriptors... None
Timing characteristics
Horizontal scan range.... 31-94kHz
Vertical scan range...... 50-85Hz
Video bandwidth.......... 170MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1280x720p at 60Hz
Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 746 +hsync -vsync
Detailed timing #1....... 1920x1080p at 60Hz (16:9)
Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Standard timings supported
720 x 400p at 70Hz - IBM VGA
720 x 400p at 88Hz - IBM XGA2
640 x 480p at 60Hz - IBM VGA
640 x 480p at 67Hz - Apple Mac II
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768i at 87Hz - IBM
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 720p at 60Hz - VESA STD
1280 x 800p at 60Hz - VESA STD
1440 x 900p at 60Hz - VESA STD
1280 x 960p at 60Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1400 x 1050p at 60Hz - VESA STD
1680 x 1050p at 60Hz - VESA STD
1600 x 1200p at 60Hz - VESA STD
EIA/CEA-861 Information
Revision number.......... 3
IT underscan............. Not supported
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Default EDID
Basic audio.............. Supported
YCbCr 4:4:4.............. Not supported
YCbCr 4:2:2.............. Not supported
Native formats........... 1
Detailed timing #1....... 720x480p at 60Hz (4:3)
Modeline............... "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync
Detailed timing #2....... 1920x1080i at 60Hz (16:9)
Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync
+vsync
Detailed timing #3....... 1920x1080i at 50Hz (16:9)
Modeline............... "1920x1080" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 interlace +hsync
+vsync
Detailed timing #4....... 1280x720p at 60Hz (16:9)
Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
Detailed timing #5....... 1280x720p at 50Hz (16:9)
Modeline............... "1280x720" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
CE video identifiers (VICs) - timing/formats supported
720 x 576p at 50Hz - EDTV (4:3, 16:15)
1280 x 720p at 50Hz - HDTV (16:9, 1:1)
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
1920 x 1080i at 50Hz - HDTV (16:9, 1:1)
1280 x 720p at 60Hz - HDTV (16:9, 1:1) [Native]
1920 x 1080p at 60Hz - HDTV (16:9, 1:1)
1920 x 1080p at 50Hz - HDTV (16:9, 1:1)
NB: NTSC refresh rate = (Hz*1000)/1001
CE audio data (formats supported)
LPCM 3-channel, 24-bits
at 44/48 kHz
CE speaker allocation data
Channel configuration.... 3.0
Front left/right......... Yes
Front LFE................ No
Front center............. Yes
Rear left/right.......... No
Rear center.............. No
Front left/right center.. No
Rear left/right center... No
Rear LFE................. No
CE vendor specific data (VSDB)
IEEE registration number. 0x000C03
CEC physical address..... 1.0.0.0
Maximum TMDS clock....... 165MHz
Report information
Date generated........... 08/03/2011
Software revision........ 2.52.0.857
Data source.............. Real-time 0x0031
Operating system......... 5.1.2600.2.Service Pack 3
18
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Default Communication Parameters
11 Default Communication Parameters
Table 4: Default Communication Parameters
EDID
EDID data is passed between Output 1 and Input 1
RS-232
Protocol 2000
Baud Rate:
9600
Data Bits:
8
Stop Bits:
1
Parity:
None
Command Format:
Example (Output 1 to Input 1):
HEX
0x01, 0x81, 0x81, 0x81
Ethernet
Default Settings
IP Address:
Subnet Mask:
Default Gateway:
TCP Port:
192.168.1.39
255.255.255.0
192.168.1.1
5000
UDP Port:
50000
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Kramer Protocol 2000
12 Kramer Protocol 2000
This RS-232/RS-485 communication protocol uses four bytes of
information as defined below.
Table 5: Protocol Definitions
MSB
LSB
DESTI-
INSTRUCTION
NATION
D
6
N5
5
N4
4
N3
3
N2
2
N1
1
N0
0
0
7
1st byte
INPUT
I6
6
I5
5
I4
4
I3
3
I2
2
I1
1
I0
0
1
7
2nd byte
OUTPUT
O6
6
O5
5
O4
4
O3
O2
2
O1
1
O0
0
1
3
7
3rd byte
MACHINE NUMBER
OVR
6
X
5
M4
4
M3
3
M2
M1
M0
0
1
2
1
7
4th byte
1st BYTE:
Bit 7 – Defined as 0.
D – “DESTINATION”:
0 - for sending information to the switchers (from the PC);
1 - for sending to the PC (from the switcher).
N5…N0 – “INSTRUCTION”
The function that is to be performed by the switcher(s) is defined by the INSTRUCTION (6 bits). Similarly, if a function is
performed via the machine’s keyboard, then these bits are set with the INSTRUCTION NO., which was performed. The
instruction codes are defined according to the table below (INSTRUCTION NO. is the value to be set for N5…N0).
2nd BYTE:
Bit 7 – Defined as 1.
I6…I0 – “INPUT”.
When switching (ie. instruction codes 1 and 2), the INPUT (7 bits) is set as the input number which is to be switched.
Similarly, if switching is done via the machine’s front-panel, then these bits are set with the INPUT NUMBER which was
switched. For other operations, these bits are defined according to the table.
3rd BYTE:
Bit 7 – Defined as 1.
O6…O0 – “OUTPUT”.
When switching (ie. instruction codes 1 and 2), the OUTPUT (7 bits) is set as the output number which is to be switched.
Similarly, if switching is done via the machine’s front-panel, then these bits are set with the OUTPUT NUMBER which was
switched. For other operations, these bits are defined according to the table.
4th BYTE: Bit 7 – Defined as 1.
Bit 5 – Don’t care.
OVR – Machine number override.
M4…M0 – MACHINE NUMBER.
Used to address machines in a system via their machine numbers. When several machines are controlled from a single serial
port, they are usually configured together with each machine having an individual machine number. If the OVR bit is set, then
all machine numbers will accept (implement) the command, and the addressed machine will reply.
1 The instruction codes in Table 6 are a sub-set of the Protocol 2000. The full protocol is available from
20
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
Kramer Protocol 2000
For a single machine controlled via the serial port, always set M4…M0 = 1, and make sure that the machine itself is
configured as MACHINE NUMBER = 1.
Table 6: Instruction Codes for Protocol 2000
Note: All values in the table are decimal, unless otherwise stated.
INSTRUCTION
DESCRIPTION
DEFINITION FOR SPECIFIC INSTRUCTION
INPUT OUTPUT
NOTE
#
RESET VIDEO
0
0
1
0
1
SWITCH VIDEO
Set equal to video input
which is to be switched
(0 = disconnect)
Set equal to video output which is 2, 15
to be switched
(0 = to all the outputs)
STORE VIDEO STATUS
RECALL VIDEO STATUS
Set as SETUP #
0 - to store
1 - to delete
0
2, 3, 15
3
Set as SETUP #
Set as SETUP #
2, 3, 15
4, 3
4
5
REQUEST STATUS OF A
VIDEO OUTPUT
Equal to output number whose
status is reqd
REQUEST WHETHER SETUP
IS DEFINED / VALID INPUT IS
DETECTED
SETUP #
or
Input #
0 - for checking if setup is defined
1 - for checking if input is valid
8
15
LOCK FRONT PANEL
0 - Panel unlocked
1 - Panel locked
0
0
0
2
30
31
61
REQUEST WHETHER PANEL
IS LOCKED
IDENTIFY MACHINE
16
13
0 - Request first 4 digits
1 - Request first suffix
2 - Request second suffix
3 - Request third suffix
10 - Request first prefix
11 - Request second prefix
12 - Request third prefix
1 - video machine name
2 - audio machine name
3 - video software version
4 - audio software version
5 - RS422 controller name
6 - RS422 controller
version
7 - remote control name
8 - remote software
version
9 - Protocol 2000 revision
1 - number of inputs
2 - number of outputs
3 - number of setups
DEFINE MACHINE
1 - for video
2 - for audio
3 - for SDI
14
62
4 - for remote panel
5 - for RS-422 controller
NOTES on the above table:
NOTE 1 - When the master switcher is reset, (e.g. when it is turned on), the reset code is sent to the PC. If this code is sent to
the switchers, it will reset according to the present power-down settings.
NOTE 2 - These are bi-directional definitions. That is, if the switcher receives the code, it will perform the instruction; and if
the instruction is performed (due to a keystroke operation on the front panel), then these codes are sent. For example, if the
HEX code
01
85
88
83
was sent from the PC, then the switcher (machine 3) will switch input 5 to output 8. If the user switched input 1 to output 7
via the front panel keypad, then the switcher will send HEX codes:
41
81
87
83
to the PC.
When the PC sends one of the commands in this group to the switcher, then, if the instruction is valid, the switcher replies by
sending to the PC the same four bytes that it was sent (except for the first byte, where the DESTINATION bit is set high).
NOTE 3 - SETUP # 0 is the present setting. SETUP # 1 and higher are the settings saved in the switcher's memory, (i.e. those
used for Store and Recall).
NOTE 4 - The reply to a "REQUEST" instruction is as follows: the same instruction and INPUT codes as were sent are
returned, and the OUTPUT is assigned the value of the requested parameter. The replies to instructions 10 and 11 are as per
the definitions in instructions 7 and 8 respectively. For example, if the present status of machine number 5 is breakaway
setting, then the reply to the HEX code
0B
would be HEX codes
4B 80
80
80
81
85
85
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Kramer Protocol 2000
NOTE 8 - The reply is as in TYPE 3 above, except that here the OUTPUT is assigned with the value 0 if the setup is not
defined / no valid input is detected; or 1 if it is defined / valid input is detected.
NOTE 13 - This is a request to identify the switcher/s in the system. If the OUTPUT is set as 0, and the INPUT is set as 1, 2,
5 or 7, the machine will send its name. The reply is the decimal value of the INPUT and OUTPUT. For example, for a 2216,
the reply to the request to send the audio machine name would be (HEX codes):
7D
96
90
81 (i.e. 128dec+ 22dec for 2nd byte, and 128dec+ 16dec for 3rd byte).
If the request for identification is sent with the INPUT set as 3 or 4, the appropriate machine will send its software version
number. Again, the reply would be the decimal value of the INPUT and OUTPUT - the INPUT representing the number in
front of the decimal point, and the OUTPUT representing the number after it. For example, for version 3.5, the reply to the
request to send the version number would be (HEX codes):
7D
83
85
81 (i.e. 128dec+ 3dec for 2nd byte, 128dec+ 5dec for 3rd byte).
If the OUTPUT is set as 1, then the ASCII coding of the lettering following the machine’s name is sent. For example, for the
VS-7588YC, the reply to the request to send the first suffix would be (HEX codes):
7D
D9
C3
81 (i.e. 128dec+ ASCII for “Y”; 128dec+ ASCII for “C”).
NOTE 14 - The number of inputs and outputs refers to the specific machine which is being addressed, not to the system. For
example, if six 16X16 matrices are configured to make a 48X32 system (48 inputs, 32 outputs), the reply to the HEX code
3E
82
81
82 (ie. request the number of outputs)
would be HEX codes
7E
82
90
82
ie. 16 outputs
NOTE 15 – When the OVR bit (4th byte) is set, then the “video” commands have universal meaning. For example,
instruction 1 (SWITCH VIDEO) will cause all units (including audio, data, etc.) to switch. Similarly, if a machine is in
“FOLLOW” mode, it will perform any “video” instruction.
NOTE 16 - The reply to the “REQUEST WHETHER PANEL IS LOCKED” is as in NOTE 4 above, except that here the
OUTPUT is assigned with the value 0 if the panel is unlocked, or 1 if it is locked.
22
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
We warrant this product free from defects in materialand workmanship under the following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHATIS COVEREDANDWHATIS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not
covered by thewarranty:
1. Any product which is not distributed by us or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.
3. Damage, deterioration ormalfunctionresultingfrom:
i) Accident, misuse, abuse, neglect, fire, water, lightningorotheracts of nature
ii) Product modification, orfailure to follow instructions supplied withtheproduct
iii) Repair orattemptedrepairby anyone not authorized by Kramer
iv) Any shipment of theproduct (claims must bepresentedtothe carrier)
v) Removal orinstallation of theproduct
vi) Any other cause, which does not relate to aproduct defect
vii) Cartons, equipment enclosures, cables or accessories used inconjunction withtheproduct
WHATWE WILLPAYFORANDWHATWE WILLNOT PAY FOR
We will pay labor andmaterialexpenses for covered items. We willnot pay for the following:
1. Removalor installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are
theresponsibility of the Kramer dealer from whom theproduct was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of
warranty coverage, and should be included in any shipment of the product. Please also include in any mailing a
contact name, company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATIONOFIMPLIEDWARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration
to the length of this warranty.
EXCLUSIONOF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer
shallnot be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the
product, loss of time, commercialloss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on
how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, andyou may also have otherrights, which vary from place toplace.
NOTE:Allproducts returned to Kramerforservice must haveprior approval.This may beobtained from your dealer.
This equipment has been tested to determine compliancewiththerequirements of:
EN-50081:
"Electromagnetic compatibility (EMC);
generic emission standard.
Part 1: Residential, commercialand light industry"
"Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercialand light industry environment".
FCC* Rules and Regulations:
EN-50082:
CFR-47:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use the suppliedDC powersupply to feedpower to the machine.
Pleaseuse recommendedinterconnectioncables toconnect the machine to othercomponents.
* FCC andCEapprovedusing STPcable(for twisted pair products)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest information on our products and a list of
Kramer distributors visit www.kramerelectronics.com
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
2900- 000734
3
P/N:
Rev:
Kramer Electronics, Ltd.
E-mail: [email protected]
P/N: 2900-000734 REV 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|