KRAMER ELECTRONICS LTD.
USER MANUAL
MODELS:
PT-571HDCP
DVI Line Transmitter
PT-572HDCP+
DVI Line Receiver
P/N: 2900-000689 Rev 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Figures
PT-571HDCP/PT-572HDCP+ – Contents
i
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP
5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP
7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters, and GROUP
11: Sierra Products.
Congratulations on purchasing your Kramer PT-571HDCP and PT-572HDCP+
transmitter/receiver pair, which is ideal for the following typical applications:
Boardrooms, conference rooms and training rooms
Presentation systems
Signal distribution and home theater
Range extender for medical equipment
You must use Shielded Twisted Pair (STP) cabling with the
PT-571HDCP and PT-572HDCP+.
!
Use only a straight pin-to-pin cable with RJ-45 connectors that
meet the EIA /TIA 568B standard. Failure to do so may result in
damage to the device(s).
!
PT-571HDCP/PT-572HDCP+ - Introduction
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
to check for up-to-date user manuals, application programs, and to check
if firmware upgrades are available (where appropriate).
i
2.1
Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer PT-571HDCP and PT-572HDCP+ transmitter/receiver
pair away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
!
2.2
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
!
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
2
PT-571HDCP/PT-572HDCP+ - Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
2.4
Accessory to Medical Equipment (IEC 60601-1-2)
In the modern medical environment remote access is essential, for example, to
transfer clinical data between doctors and to train to medical students. The
PT-571HDCP/PT-572HDCP+ pair is certified according to the IEC 60601-1-2,
Clause 2.1.3, Medical Electrical Equipment, Part 1: General Requirements for
EMC standard which is required when accessory devices are used at locations
where medical personnel and patients are present.
The PT-571HDCP/PT-572HDCP+ pair constitutes an optional component that can
be considered necessary and suitable as part of medical equipment or for use as
part of a medical system to provide real time simultaneous video feeds to those
present at the local medical environment and at remote locations. In this
environment, the PT-571HDCP/PT-572HDCP+ can be added to the system ONLY
if the connecting equipment has been evaluated and meets the IEC 60601-1-2
EMC standards. Note, that when attaching accessory devices to a digital or
analog interface, they must comply with the IEC standard for which they are used:
EMC Standard (IEC 60601-1-2), Information Technology equipment (IEC 60950-1
(2ed)).
PT-571HDCP/PT-572HDCP+ - Getting Started
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Overview
The PT-571HDCP is a DGKat™ twisted pair transmitter for DVI signals. The
PT-571HDCP converts a DVI signal to a single twisted pair signal and the
PT-572HDCP+ converts the twisted pair signal back to a DVI signal.
The DVI Line Transmitter/Receiver system features:
Maximum data rate/bandwidth up to 4.95Gbps (1.65Gbps per graphic
channel), WUXGA, 1920x1080p
HDTV compatibility and HDCP compliance
Medical equipment compliance
EDID PassThru that passes EDID signals between the source and display
3D pass-through
Up to 90m (295ft) at SXGA, or up to 30m (98ft) at UXGA on shielded
BC−DGKat524 cable. Up to 90m (295ft) at SXGA, or up to 70m (230ft) at
UXGA on shielded BC−DGKat623 cable. Up to 100m (330ft) at SXGA, or up
to 80m (265ft) at UXGA on shielded BC−DGKat7a23 cable
Note that the transmission range depends on the signal resolution, graphics card and
display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7a cables may
not reach these ranges
DGKat™ Signal Integration – Kramer’s unique technology for converting
TMDS as well as control and communication to signals that run over twisted
pair cables
Power Connect™ that feeds 12V DC over the CAT 5 cable from transmitter
Ultra-Compact Pico TOOLS™ – 4 units can be rack mounted side−by−side
Use only shielded cable where both ends of the shield are soldered
to ground to eliminate ESD interface.
i
4
PT-571HDCP/PT-572HDCP+ - Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1
3.2
Using Twisted Pair Cable
Kramer engineers have developed special twisted pair cables to best match our
digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the
Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23
(CAT 7a 23 AWG cable). These specially built cables significantly outperform
regular CAT 5/CAT 6/CAT 7a cables.
About the Power Connect™ Feature
The Power Connect™ feature here means that only one unit in a system, the
transmitter or receiver, needs to be connected to a power source when the
devices are within 90m (270ft) of each other. The Power Connect™ feature
applies as long as the cable can carry power and the distance does not exceed
90m on standard CAT 5 cable. For longer distances, heavy gauge cable should be
used (CAT 5 cable is still suitable for the video/audio transmission, but not for
feeding the power at these distances).
PT-571HDCP/PT-572HDCP+ - Overview
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Defining the PT-571HDCP DVI Line
Transmitter
The Kramer Pico TOOLS PT-571HDCP DVI Line Transmitter receives a DVI
signal, encodes it, and transmits it over a CAT 5 cable to the PT-572HDCP+. The
PT-571HDCP has:
A DVI input connector
An RJ-45 CAT 5 output connector
One power status LED
Figure 1: PT-571HDCP DVI Line Transmitter
#
1
2
3
4
Feature
Function
12V DC
+12V DC connector for powering the unit
Connect to the DVI source
DVI IN Connector
OUT RJ-45 Connector
ON LED
Connect to the IN RJ-45 connector on the PT-572HDCP+
Lights only when the machine is powered (whether directly
from the power adapter or via the PT-572HDCP+) and an
input is connected
If no input is connected the unit invokes the power save
mode automatically turning off the power
6
PT-571HDCP/PT-572HDCP+ - Defining the PT-571HDCP DVI Line Transmitter
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Defining the PT-572HDCP+ DVI Line
Receiver
The Kramer Pico TOOLS PT-572HDCP+ DVI Line Receiver receives an encoded
signal over a CAT 5 cable transmitted from the PT-571HDCP, decodes it, and
converts it to a DVI output.
The PT-572HDCP+ has:
A DVI output connector
An RJ-45 CAT 5 input connector
One power status LED
Figure 2: PT-572HDCP+ DVI Line Receiver
#
1
2
3
4
Feature
Function
12V DC
+12V DC connector for powering the unit
Connect to the DVI acceptor
DVI OUT Connector
IN RJ-45 Connector
ON LED
Connect to the OUT RJ-45 connector on the PT-571HDCP
Lights red when receiving power only, orange when output
and power are attached, and yellow when both an active
input and output are attached
PT-571HDCP/PT-572HDCP+ - Defining the PT-572HDCP+ DVI Line Receiver
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Connecting the Transmitter Receiver Pair
Always switch off the power to each device before connecting it to your
Transmitter and Receiver pair. After connecting your Transmitter and
!
Receiver pair, connect the power and then switch on the power to
each device.
You can use the PT-571HDCP DVI Line Transmitter with the PT-572HDCP+ DVI
Line Receiver to configure a DVI transmitter/receiver system.
To connect the PT-571HDCP to the PT-572HDCP+, as illustrated in the example
1. Connect the CAT 5 OUT RJ-45 connector on the PT-571HDCP to the CAT 5
IN RJ-45 connector on the PT-572HDCP+ via a CAT 5 cable (see
2. On the PT-571HDCP, connect a DVI source (for example, a computer
graphics source) to the DVI IN connector.
3. On the PT-572HDCP+, connect the DVI OUT connector to a DVI acceptor
(for example, a display).
4. Connect the 12V DC power adapter to the power socket on the
PT-571HDCP and/or the PT-572HDCP+ and connect the adapter to the
8
PT-571HDCP/PT-572HDCP+ - Connecting the Transmitter Receiver Pair
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1
Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors
This section defines the CAT 5 pinout, using a straight pin-to-pin cable with RJ-45
connectors.
Note, that the cable Ground shielding must be connected / soldered to
the connector shield.
i
Figure 4: CAT 5 PINOUT
EIA /TIA 568B
Wire Color
PIN
1
Orange / White
Orange
2
3
4
5
6
7
8
Green / White
Blue
Blue / White
Green
Brown / White
Brown
Pair 1 4 and 5
Pair 2 1 and 2
Pair 3 3 and 6
Pair 4 7 and 8
10
PT-571HDCP/PT-572HDCP+ - Connecting the Transmitter Receiver Pair
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Technical Specifications
PT-571HDCP
PT-572HDCP+
INPUTS:
1 DVI, 1.2Vpp on a DVI
Molex 24pin female
connector; DDC signal
5Vpp (TTL)
1 RJ-45 connector
OUTPUTS:
1 RJ-45 connector
1 DVI, 1.2Vpp on a DVI
Molex 24-pin female
connector; DDC signal
5Vpp (TTL)
MAX. DATA RATE:
4.95Gbps (1.65Gbps per graphic channel)
0° to +40°C (32° to 104°F)
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
HUMIDITY:
-40° to +70°C (-49° to 158°F)
10% to 90%, RHL non-condensing
12V DC, 310mA (transmitter and receiver together)
6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H
0.14kg (0.3lbs)
POWER SOURCE:
DIMENSIONS:
WEIGHT:
INCLUDED ACCESSORIES:
OPTIONAL ACCESSORIES:
Power supply, mounting brackets
19” RK-4PT rack adapter, Kramer DVI cables and
BC-DGKat524 (CAT 5 24 AWG), BC-DGKat623 (CAT 6
23 AWG) and BC-DGKat7a23 (CAT 7a 23 AWG) cables
Specifications are subject to change without notice
PT-571HDCP/PT-572HDCP+ - Technical Specifications
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: [email protected]
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
!
2900- 000689
8
PN:
Rev:
Download from Www.Somanuals.com. All Manuals Search And Download.
|