Kramer Electronics Car Speaker SPK WA511 User Manual

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

SPK-WA511

On-Wall Active Speakers

P/N: 2900-300112 Rev 3

Download from Www.Somanuals.com. All Manuals Search And Download.

This page is intentionally left blank

Download from Www.Somanuals.com. All Manuals Search And Download.

This page is intentionally left blank

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer SPK-WA511 On-Wall Active

Speakers, which are ideal for the following typical applications:

•

Boardrooms

•

Presentation venues

Home theater

Conference rooms

Educational classrooms

The package includes one of each of the following items:

•

A pair of SPK-WA511 Active Speakers

An RCA cable (2 meters)

A speaker cable for connecting the active speaker to the passive speaker (4

meters)

•

An AC power cord (3 meters)

A pair of U-shaped rotating mounting brackets with 4 mounting bracket

screws

•

This user manual

SPK-WA511 - Introduction

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

We recommend that you:

•

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•

Review the contents of this user manual

Use Kramer high-performance high-resolution cables

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1

Achieving the Best Performance

To achieve the best performance:

•

Use only good quality connection cables (such as the Kramer BC-2S) to

avoid interference, deterioration in signal quality due to poor matching, and

elevated noise levels (often associated with low quality cables)

•

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•

Position your Kramer SPK-WA511 away from moisture, excessive sunlight

and dust

To ensure that you obtain the best sound results, do not open the

housing of the passive speaker or the active speaker.

SPK-WA511 - Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

The SPK-WA511 is a powered two-way speaker system designed for indoor wall

mounting. The system accepts a line level stereo input and amplifies it using a

built-in amplifier and outputs a speaker signal to the passive speaker.

The SPK-WA511 speaker system features:

•

Three available inputs (that can either be connected separately or

connected simultaneously to form a mix of the inputs) that consist of:

A Line level unbalanced stereo audio input on a 3.5mm mini jack

connector

A balanced stereo audio input on a 5-pin terminal block connector

An unbalanced stereo audio input on two RCA connectors

•

An output to external amplified or non-amplified speakers

An output to an external sub-woofer

A unique looping output, letting you chain additional pairs of active and

passive speakers

•

TREBLE, BASS and VOLUME control knobs

A control panel on the back of the active speaker that controls all the

functions of both speakers

•

A magnetic shield

Enhanced bass reflex design

An integrated 2x30W stereo amplifier (no external amplifier required)

A self adjusting power range of 90 to 240V AC

Auto-power shutoff

The SPK-WA511 is enclosed in an ABS cabinet and can be mounted indoors on

the wall, vertically or horizontally. The mounting brackets are made of hardened

steel that attach to each speaker, letting you rotate each speaker to the left or

right.

SPK-WA511 - Overview

Download from Www.Somanuals.com. All Manuals Search And Download.

Figure 1 and Figure 2 show examples of how the speakers can be installed in

conference room and home theater setups, respectively.

Figure 1: Active On-Wall Speakers in a Home Theater Setup

Figure 2: Active On-Wall Speakers in a Conference Room Setup

SPK-WA511 - Overview

Download from Www.Somanuals.com. All Manuals Search And Download.

Defining the SPK-WA511

This section defines the active SPK-WA511:

Figure 3: SPK-WA511 Active Speaker

SPK-WA511 - Defining the SPK-WA511

Download from Www.Somanuals.com. All Manuals Search And Download.

Feature

Function

SPEAKER OUT Connectors

Connect the active speaker to the (+) and (-)

stereo sockets on the passive speaker

The L speaker is active and the R speaker is

passive

INPUT

Connectors

5-pin Terminal Block

Connect the audio source to one or more of the

input connectors

3.5mm Mini Jack

L and R RCA

BASS Control Knob

TREBLE Control Knob

VOLUME Control knob

Rotate the button to control the bass

Rotate the button to control the treble

Rotate the button to adjust the audio volume

Connect to the AC power cord

AC-Input Power Supply (self

adjusting)

POWER Switch

For turning the unit ON (I), OFF (0) or AUTO

shutoff (II)

When selecting the AUTO shutoff mode, the

speaker enters the standby mode when idle

for over 10 minutes

10 POWER/STANDBY LED

Illuminates in green when powered (POWER

switch set to ON or AUTO)

illuminates in red when in the standby mode

(POWER switch is set to AUTO)

In the AUTO mode, the LED illuminates green

if an input signal is detected and illuminates

red if idle for over 10 minutes

11 LOOP OUTPUT 3.5mm Mini Jack

Connect to another pair of active speakers

Connector

12 SUB OUT 3.5mm Mini Connector

If required, connect an active sub-woofer to this

output for maximum bass reproduction

SPK-WA511 - Defining the SPK-WA511

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the Speakers

This section explains how to:

•

Choose the best location for your speakers (see Section 5.1 )

Install the speaker wires (see Section 5.2 )

5.1

Choosing the Best Location

Before installing the speakers:

•

Experiment by placing the speakers in different locations before finally

deciding on the most suitable location

•

Be sure that the wall type is appropriate for the mounting brackets, that is,

either solid wood, bricks, concrete, hollow building blocks, or wood studs.

You cannot mount the brackets on gypsum walls

•

Check that the mounting location is free of obstructions, such as electrical

piping, AC ducts or water lines, and so on

5.2

Installing the Speaker Wires

To install the speakers, do the following:

1. Connect the + and - stereo sockets of the active speaker to the + and -

stereo sockets of the passive speaker using the cable supplied, as follows:

Passive Speaker (R)

Active Speaker (L)

Figure 4: Connecting the Active Speaker to the Passive Speaker

SPK-WA511 - Installing the Speakers

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Connect the audio source (for example, a CD or a DVD player and so on) to

one of the INPUT connectors on the active speaker.

3. Connect the power.

4. Adjust the volume on the input source.

5. Adjust the volume control on the rear side control panel.

6. Adjust the bass and treble control on the rear side control panel.

7. If required, connect an additional set of speakers by connecting the LOOP

OUTPUT connector to the input of a second active speaker.

8. If required, mount the speaker on the wall via the removable mounting

brackets. To do so:

Mark the location of the mounting holes

Screw the mounting screws (not included in the package) into the

mounting holes

Slide the mounting bracket over the mounting screws so that the

mounting bracket is secured to the surface

SPK-WA511 - Installing the Speakers

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications

Audio and Power

DESCRIPTION:

HIGH FREQUENCY DRIVER:

2-way Bass Reflex active cabinet speaker

1/2" MYLAR dome tweeter

LOW FREQUENCY DRIVER:

IMPEDANCE:

5 1/4” Polypropylene cone with rubber edge woofer

4Ω

DISPERSION COVERAGE:

CROSSOVER FREQUENCY:

NOMINAL SENSITIVITY:

DAMPING FACTOR:

DIRECTIVITY FACTOR (Q):

DIRECTIVITY INDEX (DI):

SPL MAX PEAK:

130° @2000Hz

8000Hz

85dB SPL @1m, 1W

>100 @ 8Ω/400Hz

5.8 (averaged 100Hz – 10kHz); 6.6 (2kHz)

7.6dB (averaged 100Hz – 10kHz); 8.2dB (2kHz)

110dB

FREQUENCY RESPONSE:

S/N RATIO:

45Hz to 20kHz

> 83dB

THD:

< 0.2%

BUILT IN POWER AMPLIFIER:

CONTROLS:

2x30W RMS

Volume, bass and treble

0.7W

STANDBY MODE POWER

CONSUMPTION:

INPUTS SIGNAL FOR

SYSTEM “WAKE-UP” FROM

STANDBY MODE:

+8mV - +11 mV

INPUT CONNECTORS:

OUTPUT CONNECTORS:

POWER SOURCE:

Line level unbalanced stereo audio on a 3.5mm mini jack

Line level balanced stereo audio on a terminal block connector

Line level unbalanced stereo audio on left and right RCA connectors

Speaker (to connect to the external passive speaker)

3.5mm mini jack lineout for optional sub-woofer

Looping output on a 3.5mm mini jack

90−240V AC 50/60Hz (self adjusting)

Shipping and Installation

MATERIALS:

Frame, grill and brackets steel; cabinet ABS

WEIGHT PER SINGLE SPEAKER:

Active Speaker: 2.7kg (5.95lbs) approx.

Passive Speaker 2.2 kg (4.85lbs) approx.

WEIGHT WITH MOUNTING KIT:

Active Speaker: 3.1kg (6.83lbs) approx.

Passive Speaker: 2.6kg (5.73lbs) approx.

SHIPPING WEIGHT (FOR PAIR):

DIMENSIONS:

6kg (13.23lbs) approx.

18.3cm x 17cm x 24.4cm (7.2” x 6.7” x 9.6”) W, D, H

DIMENSIONS with mounting brackets: 18.3cm x 17.2cm x 26.5cm (7.2” x 6.8” x 10.4”) W, D, H

INSTALLATION CLEARANCE:

Front panel to wall (with mounting bracket): 22cm (8.7in)

Back panel to wall (with mounting bracket): 4.5cm (1.8in)

ACCESSORIES:

1 pair of U-shaped rotating mounting brackets with 4 mounting

bracket screws, 3m (9.84ft) power cord, 4m (13.12ft)

loudspeaker cable and a 2m (6.6ft) 3.5mm to 2 RCA cable

COLORS:

Available in white or black

Specifications are within a 10% tolerance and are subject to change without notice at

http://www.kramerelectronics.com

SPK-WA511 - Technical Specifications

Download from Www.Somanuals.com. All Manuals Search And Download.

This page is intentionally left blank

Download from Www.Somanuals.com. All Manuals Search And Download.

For the latest information on our products and a list of Kramer distributors,

visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

Web site: www.kramerelectronics.com

E-mail: [email protected]

SAFETY WARNING

Disconnect the unit from the power

supply before opening and servicing

P/N:

2900-300112

Rev:

Download from Www.Somanuals.com. All Manuals Search And Download.

Ingersoll Rand Marine Sanitation System 650640 XXX User Manual
Interlink electronic Computer Accessories 94 01441 User Manual
JVC Flat Panel Television LT 47X898 User Manual
Kawasaki Drill 840475 User Manual
Kenmore Water System 6253847 User Manual
Kenwood Mixer FPX930 User Manual
Kenwood Stereo Receiver C V750 User Manual
KitchenAid Food Processor 11 CUP User Manual
Knoll Systems Projector HD102 User Manual
Kramer Electronics Projector VP 725XLA User Manual