External Setups
E 1
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Encoder 1
Encoder 2
Encoder 3
Encoder 4
7
[Encoder]
Global Ch
CC#28
Global Ch
CC#29
Global Ch
CC#30
Global Ch
CC#31
Click the controller logo on the “PERFORMANCE” page. Select “Load Controller Map...”
from the displayed controller menu. Load the controller setting file “LegacyCell.cmap”
from the “Presets” folder that’s located inside the folder where the KORG Legacy Collec-
tion is installed.
CC#/Note
Name
Ch
KLC LegacyCell
Slider 1
Slider 2
Slider 3
Slider 4
8
[Slider]
Global Ch
CC#77
Global Ch
CC#15
Global Ch
CC#5
Global Ch
CC#20
CC#/Note
Name
Ch
XMOD INT
Global Ch
CC#12
FREQ MOD
Global Ch
CC#13
PWM INT
Global Ch
#CC15
VCF Cut
9
[A]
Global Ch
#CC74
Click the “FILE” button at the bottom of the screen. Click the “LOAD” button in the dis-
play and make the popup menu appear. Choose “Controller Map...” from the popup
menu. Load the controller setting file “MonoPoly.cmap” from the “Presets” folder
located inside the folder where the KORG Legacy Collection is installed.
CC#/Note
Name
Ch
KLC Mono/Poly
VCF EG ATTACK
Global Ch
#CC28
VCF EG DECAY
Global Ch
#CC29
VCF EG SUSTAIN
Global Ch
#CC30
VCF EG RELEASE
Global Ch
#CC31
10
11
12
13
[B]
CC#/Note
Name
Ch
OSC 1 Wave
Global Ch
CC#77
Filter Cutoff
Global Ch
CC#74
Filter Resonance
Global Ch
CC#71
Filter EG Int
Global Ch
CC#79
KORG
1: Connect the microSTATION’s MIDI OUT jack to the microKORG’s MIDI IN jack with a
MIDI cable.
2: Set the EDIT SELECT 2 knob to “MIDI”. Move Knob 1 to set the MIDI CH to “1”. Move
Knob 3 to set the CLOCK to “Ext”.
3: Set the EDIT SELECT 2 knob to “GLOBAL”. Move Knob 4 to set the POSITION to “PrE”
(Pre TG).
4: Press the 4 key while holding the SHIFT key to enter MIDI Filter settings. Move Knob 1
to select “P-E” (PROGRAM CHANGE Enabled). Move Knob 2 to select “C-E” (CONTROL
CHANGE Enabled). Move Knob 3 to select “b-E” (PITCH BEND Enabled).
[A]
CC#/Note
Name
Ch
microKORG
OSC 1 Control2
Global Ch
CC#15
OSC 2 Tune
Global Ch
CC#19
OSC 1 Level
Global Ch
CC#20
OSC 2 Level
Global Ch
CC#21
[B]
CC#/Note
Name
Ch
Filter1 Balance
Global Ch
CC#27
Filter1 Cutoff
Global Ch
CC#74
Filter1 Resonance
Global Ch
CC#71
Drive/WS Depth
Global Ch
CC#83
1: Connect the microSTATION’s MIDI OUT jack to the microKORG XL’s MIDI IN jack with a
MIDI cable.
2: Set the KNOB FUNCTION SELECT dial to “FULL EDIT”.
3: Move Knob 1 to set the page to “MIDI.” Move Knob 2 to set the parameter to “MIDI
CH.” Move Knob 3 to set the value to “01.” Move Knob 2 to set the parameter to
CLOCK” Move Knob 3 to set the value to “EXT MIDI.”
4: Move Knob 1 to set the page to “GLOBAL.” Move Knob 2 to set the parameter to
“POSITION ” Move Knob 3 to set the value to “PRE TG.”
[A]
CC#/Note
Name
Ch
EG2(AmpEG) Attack
Global Ch
EG2(AmpEG) Release
Global Ch
MFX1 We/Dry
Global Ch
MFX2 We/Dry
Global Ch
microKORG XL
5: Move Knob 1 to set the page to “MIDI FLT.” Move Knob 2 to set the parameter to
“PROG CHG ” Move Knob 3 to set the value to “ENABLE.” Move Knob 2 to set the
parameter to “CTRL CHG ” Move Knob 3 to set the value to “ENABLE.” Move Knob 2 to
set the parameter to “P.BEND CHG ” Move Knob 3 to set the value to “ENABLE.”
14
[B]
CC#/Note
CC#73
CC#72
CC#115
CC#116
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
OSC1 Wave
Filter 1 Cut
Filter 1 Resonance
Global Ch
CC#71
Filter 1 Balance
Global Ch
CC#27
1: Connect the microSTATION’s MIDI OUT jack to the RADIAS’ MIDI IN jack with a MIDI
cable.
2: Press the [GLOBAL] key to enter Global mode. Set “Position” on the “GLOBAL” page to
“Pre TG”.
3: Press the [PAGE] key to move to the “MIDI” page. Set “MIDI Ch” to “01” and “Clock” to
“Ext-MIDI”.
4: Press the [PAGE] key to move to the “MIDI FILTER” page. Set “ProgChg” to “o”,
“CtrlChg” to “o”, “P.Bend” to “o”.
15
16
17
18
19
20
21
[A]
[B]
[A]
[B]
Global Ch
CC#8
Global Ch
CC#74
CC#/Note
Name
Ch
RADIAS
OSC 1 Control2
Global Ch
CC#17
LFO 1 Frequency
Global Ch
CC#90
OSC 2 Tune
Global Ch
CC#21
Amp Level
Global Ch
CC#7
CC#/Note
Name
Ch
KORG
OSC1 Wave
Global Ch
CC#8
Filter 1 Cut
Global Ch
CC#74
Filter 1 Resonance
Global Ch
CC#71
Filter 1 Balance
Global Ch
CC#27
1: Connect the microSTATION’s MIDI OUT jack to the R3’s MIDI IN jack with a MIDI cable.
2: Turn [PAGE SELECT] dial to move to “EDIT-P40 Global-A” page and set [KNOB4]’s
“Position” to “Pre TG.”
3: Turn [PAGE SELECT] dial to move to “EDIT-P42 MIDI” page and set [KNOB1]’s “MIDI
Ch” to “01”, [KNOB4]’s “Clock” to “Ext-MIDI.”
4: Turn [PAGE SELECT] dial to move to “EDIT-P43 MIDIFilt” page and set [KNOB1]’s
“PROG Chg” to “Enable,” [KNOB2]’s “Ctrl Chg” to “Enable”, [KNOB3]’s “PitchBend” to
“Enable.”
CC#/Note
Name
Ch
R3
OSC 1 Control2
Global Ch
CC#17
LFO 1 Frequency
Global Ch
CC#90
OSC 2 Tune
Global Ch
CC#21
Amp Level
Global Ch
CC#7
CC#/Note
Name
Ch
Track 1 Send
Ch:01G
Track 2 Send
Ch:02
Track 3 Send
Ch:03
Track 4 Send
Ch:04
[Send]
[Pan]
CC#/Note
Name
Ch
CC#18
CC#18
CC#18
CC#18
Track 1 Pan
Ch:01G
Track 2 Pan
Ch:02
Track 3 Pan
Ch:03
Track 4 Pan
Ch:04
Load the “KORG microSTATION template.als” file.
Select “Preferences...” in the “Options” menu (or select “Preferences...” from the “Live”
menu on the Mac) to open the “Preferences” dialog. Set “Input” of “Remote Control” to
“microSTATION(KEYBOARD)”.
Ableton
Live
CC#/Note
Name
Ch
CC#10
CC#10
CC#10
CC#10
Track 1 Volume
Ch:01G
Track 2 Volume
Ch:02
Track 3 Volume
Ch:03
Track 4 Volume
Ch:04
[Volume]
CC#/Note
CC#7
CC#7
CC#7
CC#7
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Mallet Stiffness
soft/hard
Mallet Force
Name
Mallet Noise pitch
Mallet Noise decay
strength
Global Ch
CC#45
22
23
[A]
[B]
Ch
Global Ch
CC#44
Global Ch
CC#46
Global Ch
CC#47
CC#/Note
Lounge Lizard EP-3
Select “Import...” from the “File” menu and load the setting file “KORG Midi Links.lx3”.
Pickup Geometry
Symmetry
Pickup Geometry
Distance
Pickup Volume
Input
Pickup Volume Out-
put
Name
Ch
Global Ch
CC#52
Global Ch
CC#53
Global Ch
CC#54
Global Ch
CC#55
CC#/Note
Name
Ch
OSC1 Detune
Global Ch
CC#44
OSC1 PW
Global Ch
CC#45
FILTER1 Cutoff
Global Ch
CC#46
FILTER1 Q
Global Ch
CC#47
24
25
26
[A]
[B]
[A]
CC#/Note
Name
Ch
Select “Import...” from the “File” menu and load the setting file “KORG Midi Links.axf”
file.
Ultra Analog VA
FILTER1 ENV1 A
Global Ch
CC#52
FILTER1 ENV1 D
Global Ch
CC#53
FILTER1 ENV1 S
Global Ch
CC#54
FILTER1 ENV1 R
Global Ch
CC#55
Applied Acoustics
Systems
CC#/Note
Name
Ch
Chorus Mix
Global Ch
CC#44
Chorus Depth
Global Ch
CC#45
Chorus Rate
Global Ch
CC#46
Delay Mix
Global Ch
CC#47
CC#/Note
String Studio VS
Select “Import...” from the “File” menu and load the setting file “KORG Midi Links.sxf” file.
Excitator Prot
(Force, Mass)
Excitator Stiff (Fric-
tion)
Name
Excitator Velocity
Filter Cutoff
27
[B]
Ch
Global Ch
CC#102
Global Ch
CC#103
Tune
Global Ch
CC#104
Global Ch
CC#105
CC#/Note
Name
Ch
Piano
Tremolo Depth
Global Ch
CC#92
Tremolo Speed
Global Ch
CC#79
28
29
Lounge Lizard Session
Ultra Analog Session
Global Ch
CC#71
Global Ch
CC#70
Select “Import...” from the “File” menu and load the setting file “KORG Midi Links.lls” file.
CC#/Note
Name
Ch
Keyboard Glide
Global Ch
CC#5
Filter Cutoff
Global Ch
CC#74
Filter Q
Filter Env Attack
Global Ch
CC#85
Select “Import...” from the “File” menu and load the setting file “KORG Midi Links.uas”
file.
Global Ch
CC#71
CC#/Note
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Wave Osc 1
Wave Osc 2
Wave Osc 3
Cutoff
30
31
32
[A]
[B]
[A]
Global Ch
CC#16
Global Ch
CC#17
Global Ch
CC#18
Global Ch
CC#74
Copy the setting file “controlMidi” into the following folder:
Windows: The “save” folder is located inside the folder where minimoog V is installed.
(e.g. C:\Program Files\Arturia\minimoog V\save)
Mac: /Library/Preferences/minimoog V/save folder This operation will overwrite the
previous MIDI Control settings. If necessary, back up the previous controlMidi file.
CC#/Note
Name
Ch
minimoog V
Level Osc 1
Global Ch
CC#80
Level Osc 2
Global Ch
CC#81
Level Osc 3
Global Ch
CC#82
Level Ext
Global Ch
CC#83
CC#/Note
Name
Ch
Attack Time Vca 1
Global Ch
CC#92
Decay Time Vca 1
Global Ch
CC#94
Sustain Level Vca 1
Global Ch
CC#95
Release Time Vca 1
Global Ch
CC#96
Copy the setting file “controlMidi” into the following folder:
Windows: The “save” folder is located inside the folder where CS-80V is installed.
(e.g. C:\Program Files\Arturia\CS-80V\save)
Mac: /Library/Preferences/Cs80V/save folder. This operation will overwrite the previous
MIDI Control settings. If necessary, back up the previous controlMidi file.
CC#/Note
CS-80V
HighPass 1 Reso-
nance
LowPass 1 Reso-
nance
Name
HighPass 1 Cutoff
LowPass 1 Cutoff
33
34
[B]
[A]
Ch
Global Ch
CC#65
Global Ch
CC#66
Global Ch
CC#67
Global Ch
CC#68
CC#/Note
Arturia
Filter 1 Cutoff Fre-
quency
Filter 2 Cutoff Fre-
quency
Name
Filter 1 Resonance
Filter 2 Resonance
Ch
Global Ch
Global Ch
CC#16
Global Ch
CC#81
Global Ch
CC#17
Copy the setting file “controlMidi” into the following folder:
Windows: The “save” folder is located inside the folder where Moog Modular V is
installed. (e.g. C:\Program Files\Arturia\Moog Modular V\save)
Mac:/Library/Preferences/MoogModularV/save folder This operation will overwrite the
previous MIDI Control settings. If necessary, back up the previous controlMidi file.
CC#/Note
Name
Ch
CC#80
moog modular V
125Hz Band Gain
Global Ch
350Hz Band Gain
Global Ch
CC#107
1000Hz Band Gain
Global Ch
CC#108
2800Hz Band Gain
Global Ch
CC#109
35
36
[B]
[A]
CC#/Note
Name
Ch
CC#106
PORTAMENTO TIME
Global Ch
DELAY Dry/Wet
Global Ch
CC#45
DELAY time L
Global Ch
CC#46
DELAY time R
Global Ch
CC#47
Copy the setting file “controlMidi” into the following folder:
Windows: The “save” folder inside the folder where ARP2600 V is installed.
(e.g. C:\Program Files\Arturia\ARP2600V\save)
Mac: /Library/Preferences/arp2600v/save folder This operation will overwrite the previ-
ous MIDI Control settings. If necessary, back up the previous controlMidi file.
CC#/Note
CC#44
ARP2600 V
INT.FIRTER FRE-
QUENCY
Name
RESONANCE
ADSR
FILTER TYPE
37
[B]
Ch
Global Ch
CC#52
Global Ch
CC#53
Global Ch
CC#54
Global Ch
CC#55
CC#/Note
6
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Osc A PW
Filter Cutoff
Filter Resonace
Global Ch
CC#71
Filter Env Amount
Global Ch
CC#79
38
39
40
41
42
43
44
45
[V]
Global Ch
CC#20
Global Ch
CC#74
Copy the setting file “controlMidi” into the following folder:
Windows: The “save” folder is located inside the folder where Prophet V is installed.
(e.g. C:\Program Files\Arturia\ProphetV\save)
Mac: /Library/Preferences/prophetv/save folder This operation will overwrite the previ-
ous MIDI Control settings. If necessary, back up the previous controlMidi file.
CC#/Note
Name
Ch
Prophet V
Filter Env Amount
Global Ch
CC#69
Filter Cutoff
Global Ch
CC#30
Filter Resonace
Global Ch
CC#68
Volume
[VS]
[A]
Global Ch
CC#83
CC#/Note
Name
Ch
Arturia
Level
Cut Off
Resonance
Global Ch
CC#71
LFO Rate
Global Ch
CC#90
Global Ch
CC#7
Global Ch
CC#74
Copy the setting file “midi.prefs” into the following folder:
Windows: The “save” folder inside the folder where Analog Factory is installed. (e.g.
C:\Program Files\Arturia\Analog Factory\save)
Mac: /Library/Preferences/AnalogFactory folder This operation will overwrite the previ-
ous MIDI Control settings. If necessary, back up the previous controlMidi file.
CC#/Note
Name
Ch
Analog Factory
Param 1
Global Ch
CC#18
Param 2
Global Ch
CC#19
Param 3
Global Ch
CC#16
Param 4
Global Ch
CC#17
[B]
CC#/Note
Name
Ch
Pan
Volume
Free
Free
Apple
GarageBand
Global Ch
CC#10
Global Ch
CC#7
Global Ch
off
Global Ch
off
CC#/Note
Name
Ch
Direct Master Level
Global Ch
CC#16
Overhead Level
Global Ch
CC#17
Room Level
Global Ch
CC#18
PZM Level
Global Ch
CC#19
[master]
[trim]
CC#/Note
Name
Ch
Kick Trim
Global Ch
CC#52
Snr Trim
Global Ch
CC#53
HiH Trim
Global Ch
CC#54
F Tom Trim
Global Ch
CC#55
Click the “Load” icon (located in the upper right corner of the BFD window) to load the
“BFD_KORG.bfd” file.
Fxpansion
BFD
CC#/Note
Name
Ch
Kick Tune
Global Ch
CC#44
Snr Tune
Global Ch
CC#45
HiH Tune
Global Ch
CC#46
F Tom Tune
Global Ch
CC#47
[tune]
CC#/Note
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Filter Frequency
Global Ch
CC#74
Filter Q
Filter Separation
Global Ch
CC#73
Filter Amount
Global Ch
CC#52
46
47
impOSCar
Global Ch
CC#71
CC#/Note
Name
Ch
Volume
Tone
Pitch
Amp Env Attack
Global Ch
CC#73
M-Tron
Global Ch
CC#7
Global Ch
CC#74
Global Ch
CC#95
CC#/Note
GMEDIA
VCF Cutoff Fre-
quency
Name
VCF Resonance
HPF Cutoff Freq Q
LFO Freq Q
48
Oddity
Ch
Global Ch
CC#74
Global Ch
CC#71
Global Ch
CC#9
Global Ch
CC#8
CC#/Note
Name
Ch
Filter Emphasis
Global Ch
CC#71
Filter Cutoff
Global Ch
CC#74
Filter Contour
Global Ch
CC#70
VCF Attack
Global Ch
CC#20
For stand-alone operation Windows: Click the “SET UP” button in the lower right part of
the “minimonsta” window to open the menu. Click on “Input device” and select “micro-
STATION KEYBOARD”. Mac: Click the “SET UP” in the lower right part of the “minimonsta”
window to open the menu. Click on “Input device” and select “CoreMIDI”.
49
50
51
minimonsta
CC#/Note
Name
Ch
Master Pan
Global Ch
CC#16
FX1 Pan
Global Ch
CC#17
FX2 Pan
FX3 Pan
Global Ch
CC#19
[Pan]
Global Ch
CC#18
For stand-alone and plug-in synthesizer operation Select “MIDI settings” (located in the
“OPTIONS” menu in the upper left corner of FL STUDIO window), and select “microSTA-
TION 1 KEYBOARD”. Select “Open” from the “FILE” menu, and load the “KORG microSTA-
TION.flp” file.
CC#/Note
Name
Ch
Image-Line Software
FL Studio
Master Volume
Global Ch
CC#80
FX1 Volume
Global Ch
CC#81
FX2 Volume
Global Ch
CC#82
FX3 Volume
Global Ch
CC#83
[Volume]
CC#/Note
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Filter Cutoff
Filter Resonance
Global Ch
CC#71
Drive
Transpose
52
53
54
MachFive
Global Ch
CC#74
Global Ch
CC#75
Global Ch
CC#76
CC#/Note
Name
Ch
Track 1 Pan
Ch:01G
Track 2 Pan
Ch:02
Track 3 Pan
Ch:03
Track 4 Pan
Ch:04
MOTU
[Pan]
CC#/Note
Name
Ch
CC#10
CC#10
CC#10
CC#10
DP (Digital Performer)
Select “Open...” from the “File” menu and open the song file “DP_microSTATION”.
Track 1 Level
Ch:01G
Track 2 Level
Ch:02
Track 3 Level
Ch:03
Track 4 Level
Ch:04
[Level]
CC#/Note
CC#7
CC#7
CC#7
CC#7
PERCUSSION VOL-
UME
PERCUSSION
DECAY
Name
VIBRATO MIX
VIBRATO DEPTH
55
56
57
58
[A]
Ch
Global Ch
CC#70
Global Ch
CC#71
Global Ch
CC#73
Global Ch
CC#74
CC#/Note
B4
UPPER MANUAL 5
1/3'
Name
UPPER MANUAL 16'
UPPER MANUAL 8'
UPPER MANUAL 4'
[B]
[A]
[B]
Ch
Global Ch
CC#12
Global Ch
CC#13
Global Ch
CC#14
Global Ch
CC#15
CC#/Note
Native Instruments
PERCUSSION VOL-
UME
PERCUSSION
DECAY
Name
VIBRATO MIX
VIBRATO DEPTH
Ch
Global Ch
CC#70
Global Ch
CC#71
Global Ch
CC#73
Global Ch
CC#74
CC#/Note
B4 II
Upper Drawbar 5 1/
3'
Name
Upper Drawbar 16'
Upper Drawbar 8'
Upper Drawbar 4'
Ch
Global Ch
CC#12
Global Ch
CC#13
Global Ch
CC#14
Global Ch
CC#15
CC#/Note
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Controller A
Controller B
Controller C
Controller D
Press the “OPTIONS” button and open the Preference dialog. Set the MIDI controllers as
below.
A: CC#0, B: CC#1, C: CC#2, D: CC#3, E: CC#4, F: CC#5, G: CC#6, H: CC#7
59
60
Battery
Global Ch
CC#0
Global Ch
CC#1
Global Ch
CC#2
Global Ch
CC#3
CC#/Note
Sound Control
Knob 1
Sound Control
Knob 2
Sound Control
Knob 3
Sound Control
Knob 4
Name
Press the “OPTIONS” button to open the “Settings” dialog. Confirm that “USE STD. CC#7
/ CC#10 VOLUME & PAN” is active. In case it is not active, click it.
Elektrik Piano
Ch
Global Ch
CC#20
Global Ch
CC#21
Global Ch
CC#22
Global Ch
CC#23
CC#/Note
Easy Edit Timbre
Brightness
Easy Edit Timbre
Harmonic
Easy Edit Timbre
Detune
Easy Edit Timbre
Env Amount
Name
61
62
[A]
[B]
Ch
Global Ch
CC#102
Global Ch
CC#103
Global Ch
CC#104
Global Ch
CC#105
On the “MASTER” page, locate the “CONTROLLER DEFINE” parameters then press the
“LOAD” button for “CONTROLLER ASSIGN” to load the setup file “KORG microSTA-
TION.f7c”.
CC#/Note
FM7
Filter Envelope
Amount
Name
Filter Cutoff
Filter 1 Resonance
Filter 1 Mode
Native Instruments
Ch
Global Ch
CC#111
Global Ch
CC#112
Global Ch
CC#113
Global Ch
CC#/Note
Name
Ch
CC#110
Timbre Harmonic
Global Ch
CC#83
Timbre Detune
Global Ch
CC#20
Timbre Brightness
Global Ch
CC#74
Timbre Env Amount
Global Ch
63
64
[A]
[B]
On the “MASTER” page, locate the “MIDI Controller Assignment” parameters then press
the “LOAD” button for “CONTROLLER ASSIGN” to load the setup file “KORG MIDI Assign-
ment.f8c”.
CC#/Note
Name
Ch
CC#79
FM8
LFO Rate
LFO Vibrato
Global Ch
CC#103
LFO Timbre
Global Ch
CC#104
LFO Tremolo
Global Ch
Global Ch
CC#90
CC#/Note
Name
Ch
CC#105
Filter 1 Cutoff
Global Ch
Filter 1 Resonance
Global Ch
Filter 2 Cutoff
Global Ch
Filter 2 Resonance
Global Ch
1: Copy the setting file “KORG MIDI Setup.mca” into the following folder. Windows: The
“mca” folder is located in the folder where the Massive is installed.
(e.g. C:\Program Files\Native Instruments\Massive\mca)
Mac: /Library/Application Support/Native Instruments/Massive/mca
2: Select “Preference...” in “Massive” menu to open “Massive Options”. Double-Click
“KORG MIDI Setup” in the “Midi Setups” of “Midi” page to turn it “on”.
65
Massive
CC#/Note
CC#74
CC#71
CC#30
CC#68
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Oscillator A Pulse
Width
Oscillator B Pulse
Width
Name
Filter Cutoff
Filter Resonance
Click the “NI” logo. Select “Load Controllermap” in the displayed menu and load
“DefaultMap.txt” from the “Presets”-“Controller maps” folder inside the folder where
PRO-53 is installed.
66
Native Instruments
PRO-53
Ch
Global Ch
CC#43
Global Ch
CC#55
Global Ch
CC#70
Global Ch
CC#71
CC#/Note
Name
Ch
Channel 1 Pan
Global Ch
CC#23
Channel 2 Pan
Global Ch
CC#24
Channel 3 Pan
Global Ch
CC#25
Channel 4 Pan
Global Ch
CC#26
67
68
69
70
71
72
[Pan]
CC#/Note
Name
Ch
Reason
Channel 1 Level
Global Ch
CC#8
Channel 2 Level
Global Ch
CC#9
Channel 3 Level
Global Ch
CC#10
Channel 4 Level
Global Ch
CC#12
[Volume]
CC#/Note
Name
Ch
Filter Freq
Global Ch
CC#74
Filter Res
Global Ch
CC#71
Filter Mode
Global Ch
CC#76
Filter Env Amount
Global Ch
CC#18
Dr.Rex
CC#/Note
Name
Ch
Propellerhead
OSC A motion
Global Ch
CC#92
OSC A shift
Global Ch
CC#86
Filter A res
Global Ch
CC#78
Filter A Freq
Global Ch
CC#79
Malstrom
NN-19
CC#/Note
Name
Ch
Filter Freq
Global Ch
CC#74
Filter Res
Global Ch
CC#71
Filter Mode
Global Ch
CC#76
Filter Env Attack
Global Ch
CC#14
CC#/Note
Name
Ch
Filter Freq
Global Ch
CC#74
Filter Res
Global Ch
CC#71
Amp Env Attack
Global Ch
CC#73
Amp Env Decay
Global Ch
CC#9
NN-XT
CC#/Note
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Drum 1 Pan
Drum 2 Pan
Drum 3 Pan
Drum 4 Pan
73
74
75
76
77
78
79
80
[Pan]
Global Ch
CC#19
Global Ch
CC#20
Global Ch
CC#21
Global Ch
CC#22
CC#/Note
Name
Ch
Drum 1 Level
Global Ch
CC#8
Drum 2 Level
Global Ch
CC#9
Drum 3 Level
Global Ch
CC#10
Drum 4 Level
Global Ch
CC#12
ReDrum
[Level]
[Pitch]
CC#/Note
Name
Ch
Propellerhead
Drum 1 Pitch
Global Ch
CC#51
Drum 2 Pitch
Global Ch
CC#52
Drum 3 Pitch
Global Ch
CC#53
Drum 4 Pitch
Global Ch
CC#54
CC#/Note
Name
Ch
OSC 1 Phase
Global Ch
CC#93
OSC 2 Phase
Global Ch
CC#106
FM
MIX
Subtractor
Global Ch
CC#108
Global Ch
CC#107
CC#/Note
Name
Ch
Layer A Pan
Global Ch
CC#83
Layer A Level
Global Ch
CC#81
Layer B Pan
Global Ch
CC#84
Layer B Level
Global Ch
CC#82
Atmosphere
CC#/Note
Name
Ch
FILTER LFOS RATE
Global Ch
CC#16
FILTER LFOS DEPTH
Global Ch
CC#17
FILTER LFOS WAVE
Global Ch
CC#18
CHAOS DOWN/UP
Global Ch
CC#19
[A]
[B]
CC#/Note
Name
Ch
Spectrasonics
Stylus RMX
Load the “StylusRMX_KORG.mlt_rmx” as the MIDI Learn set file.
CHAOS PATTERN
Global Ch
CC#80
CHAOS REPEAT
Global Ch
CC#81
CHAOS REVERSE
Global Ch
CC#82
SAMPLE START
Global Ch
CC#83
CC#/Note
Name
Ch
Layer A Pan
Global Ch
CC#83
Layer A Level
Global Ch
CC#81
Layer B Pan
Global Ch
CC#84
Layer B Level
Global Ch
CC#82
Trilogy
CC#/Note
12
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Audio Pan1
Audio Pan2
Audio Pan3
Audio Pan4
81
82
83
84
85
86
87
88
[Audio Pan]
Ch:01G
Ch:02
Ch:03
Ch:04
CC#/Note
Name
Ch
CC#10
CC#10
CC#10
CC#10
Audio Level 1
Ch:01G
Audio Level 2
Ch:02
Audio Level 3
Ch:03
Audio Level 4
Ch:04
First, you need to install the KORG USB/MIDI driver.
[Audio Level]
[MIDI Pan]
1: Select “Device Setup...” from the “Devices” menu and open the “Device setup” dialog.
Select “Generic Remote” from the “Devices” list in the left column. Select “keyboard”
for the “MIDI input” and press the “Import” button. Load “Cubase_KORG.xmll”. (If you
do not find “Generic Remote” in the left column, please add it using the “Add/
Remove” function.)
CC#/Note
Name
Ch
CC#7
CC#7
CC#7
CC#7
Cubase
MIDI Pan1
Ch:01G
MIDI Pan2
Ch:02
MIDI Pan3
Ch:03
MIDI Pan4
Ch:04
2: Press the “Apply” button.
CC#/Note
Name
Ch
CC#41
CC#41
CC#41
CC#41
MIDI Level 1
Ch:01G
MIDI Level 2
Ch:02
MIDI Level 3
Ch:03
MIDI Level 4
Ch:04
[MIDI Level]
CC#/Note
Name
Ch
CC#35
CC#35
CC#35
CC#35
Steinberg
Oscillator 1 FM
Global Ch
CC#77
Filter Cutoff
Global Ch
CC#74
Filter Resonance
Global Ch
CC#71
Filter Drive
Global Ch
CC#29
A1
CC#/Note
Name
Ch
OSC1 DEPTH
Global Ch
CC#103
OSC2 PWM
Global Ch
CC#19
OSC2 DEPTH
Global Ch
CC#105
FX OVER DRIVE
Global Ch
CC#70
Monologue
Tonic
CC#/Note
Name
Ch
ENV MOD ATTACK
Global Ch
CC#73
ENV MOD RELEASE
Global Ch
CC#72
RES
CUTOFF
Global Ch
CC#74
Global Ch
CC#71
CC#/Note
Name
Ch
OSC1 WAVE
Global Ch
CC#9
OSC1 TONE
Global Ch
CC#74
OSC1 WIDTH
Global Ch
CC#16
OSC2 WAVE
Global Ch
CC#14
Embracer
CC#/Note
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Kick Volume
Snare Volume
Ch:02
Tom Volume
Ch:03
Hi-Hat Volume
Ch:04
In the host application, change the MIDI output channel for the MIDI track you want to
use “Groove Agent” on to “ANY” or other multi-channel outputs.
89
90
Groove Agent
Ch:01G
CC#/Note
Name
Ch
CC#73
CC#73
CC#73
CC#73
DCF CUTOFF
Global Ch
CC#74
DCF RESONANCE
Global Ch
CC#71
DCF VELOCITY
Global Ch
CC#15
DCF ENV. AMOUNT
Global Ch
CC#80
Enable “RECEIVE MIDI CONTROLLER” in “KEY/CONTROL OPTION” of the “OPTIONS”
page.
HALion
CC#/Note
Steinberg
GM Edit: filt env
dec+rel
Name
GM Edit: cutoff
GM Edit: resonance
GM Edit: filt env att
91
Hypersonic
Ch
Global Ch
CC#74
Global Ch
CC#71
Global Ch
CC#77
Global Ch
CC#78
CC#/Note
Name
Ch
Shuffle
Global Ch
CC#76
Dynamics
Global Ch
CC#79
Timing
Decay
92
93
94
95
96
Virtual Guitarist
Global Ch
CC#78
Global Ch
CC#75
CC#/Note
Name
Ch
Osc 1 Pitch
Global Ch
CC#13
Osc 1 Level
Global Ch
CC#28
Osc 2 Pitch
Global Ch
CC#22
Osc 2 Level
Global Ch
CC#30
In the host application, change the MIDI output channel for the MIDI track on which
“Attack” is used for each of the sounds that you want to remote-control such as kick,
snare, drum, etc.
Attack
CC#/Note
Name
Ch
Waldorf
BASIS
VCF-CUTOFF
Global Ch
CC#74
VCF-EMPHASIS
Global Ch
CC#71
ENV1>VCF
Global Ch
CC#28
PPG Wave 2.V
Global Ch
CC#8
CC#/Note
Name
Ch
Free
Free
Free
Free
dfh
Global Ch
Off
Global Ch
Off
Global Ch
Off
Global Ch
Off
CC#/Note
Name
Ch
ToonTrack
Free
Free
Free
Free
EZ Drummer
Global Ch
Off
Global Ch
Off
Global Ch
Off
Global Ch
Off
CC#/Note
14
Download from Www.Somanuals.com. All Manuals Search And Download.
1: These operations will overwrite the previous MIDI Control settings. If necessary, back up the previous control Midi file.
2: When the MIDI channel settings of the host application and the plug-in software are the same, proper control may not be available. Please change the MIDI channel setting on
either the host application or the plug-in software. Please refer to the application’s manual for the correct setting
Scene
Variation
Manufacturers
Product Name
Knob 1
Knob 2
Knob 3
Knob 4
HINT
Name
Ch
Timbre 1 Pan
Ch:01G
Timbre 2 Pan
Ch:02
Timbre 3 Pan
Ch:03
Timbre 4 Pan
Ch:04
97
98
[Pan]
CC#/Note
Name
Ch
CC#10
CC#10
CC#10
CC#10
PLUGSOUND PRO
Timbre 1 Volume
Ch:01G
Timbre 2 Volume
Ch:02
Timbre 3 Volume
Ch:03
Timbre 4 Volume
Ch:04
[Volume]
CC#/Note
CC#7
CC#7
CC#7
CC#7
Master filter reso-
nance
Name
Filter Cutoff
Filter Resonance
Master filter cutoff
99
Charlie
Ch
Global Ch
CC#77
Global Ch
CC#78
Global Ch
CC#74
Global Ch
CC#71
UltimateSoundBank
CC#/Note
Master filter cut fre-
quency
Master filter reso-
nance
Name
Filter Cutoff
Filter Resonance
100
101
Ultra Focus
X-treme FX
Ch
Global Ch
CC#77
Global Ch
CC#78
Global Ch
CC#74
Global Ch
CC#71
CC#/Note
Master filter cut fre-
quency
Master filter reso-
nance
Name
Filter Cutoff
Filter Resonance
Ch
Global Ch
CC#77
Global Ch
CC#78
Global Ch
CC#74
Global Ch
CC#71
CC#/Note
Manufacturer Name
•
•
•
KORG: These product names are the trademark or a registered trademarks of KORG Inc.
Ableton: This product name is a trademark or a registered trademark of Ableton AG.
Applied Acoustics Systems: These product names are the trademark or a registered trademarks of Applied
Acoustics Systems DVM Inc.
•
•
•
Propellerhead: These product names are the trademark or a registered trademarks of Propellerhead Software AB.
Spectrasonics: These product names are the trademark or a registered trademarks of Spectrasonics.
Steinberg: These product names are the trademark or a registered trademarks of Steinberg Media Technologies
GmbH.
•
•
•
•
•
•
•
Arturia: These product names are the trademark or a registered trademarks of Arturia.
Apple: This product name is a trademark or a registered trademark of Apple Inc.
Fxpansion: This product name is a trademark or a registered trademark of FXpansion Audio UK Ltd.
GMEDIA: These product names are the trademark or a registered trademarks of GMEDIA Music.
Image‐Line Software: This product name is a trademark or a registered trademark of Image‐Line Software.
MOTU: These product names are the trademark or a registered trademarks of MOTU, Inc.
Native Instruments: These product names are the trademark or a registered trademarks of Native Instruments
GmbH.
•
•
•
Waldorf and the Waldorf Logo are registered trademarks of Waldorf Music GmbH.
ToonTrack: These product names are the trademark or a registered trademarks of Toontrack Music AB.
UltimateSoundBank: These product names are the trademark or a registered trademarks of Univers Sons, SA.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specifications and voltage
requirements that are applicable in the country in which it is intended that this product should
be used. If you have purchased this product via the internet, through mail order, and/or via a
telephone sale, you must verify that this product is intended to be used in the country in
which you reside.
WARNING: Use of this product in any country other than that for which it is intended could
be dangerous and could invalidate the manufacturer’s or distributor’s warranty.
Please also retain your receipt as proof of purchase otherwise your product may be
disqualified from the manufacturer’s or distributor’s warranty.
4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan
© 2010 KORG INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
|