Konica Minolta GPS Receiver NS NAV02R GPS User Manual

Quick Setup Guide  
NS-NAV02R GPS  
Features  
Actual product may vary from image shown.  
Top panel  
Congratulations on your purchase of a high-quality  
Insignia product. Your GPS is designed for reliable and  
trouble-free performance. Use this guide for initial setup.  
See your User Guide for more information.  
Side panel  
Power button  
Bracket Adjuster  
Locking level  
Package contents  
• 4.3" GPS  
LCD Screen  
Front panel  
Charge Indicator  
3
• DC power adapter  
• Mounting bracket  
• Mounting cradle  
• SD memory card (pre-installed)  
User Guide  
Micro  
SD Card  
Slot  
(cover removed)  
USB  
port  
Quick Setup Guide  
Mounting your GPS in a car  
WARNING: The assembly must not be mounted so that it impairs the driver’s view of the  
road. Make sure that your car’s airbags are not obstructed by the GPS.  
Use the supplied mounting bracket and cradle to mount your GPS in a vehicle.  
1 Slide the mount cradle onto the end of the mounting bracket to attach it.  
2 Set the bottom edge of your GPS onto the mount cradle, then push the GPS  
into the tab (1) at the top of the mount cradle.  
To remove the GPS, lift the tab (1) at the top of the mount cradle and pull  
the GPS forward.  
3 Lift the suction cup lever (3) and then press the suction cup to the  
windshield.  
Setting up your GPS  
Charging the battery  
Reset  
hole  
Your portable GPS comes with a built-in rechargeable  
battery. Fully charge the battery before using the GPS for the  
ꢀrst time. Charging time is normally about three hours. A  
fully charged battery delivers about two hours of use.  
See “Connecting power and charging the battery” below.  
Back panel  
4 Press the suction cup lever toward the windshield to attach the bracket to  
the windshield.  
5 Rotate the knob to adjust the assembly to the proper position.  
CaliforniaVehicle Code Section 26708 prohibits suction mounts on  
car windshields, side, or rear windows, as they can obstruct the  
driver’s clear view.  
Speaker  
Connecting power and charging the battery  
Connecting DC power  
CAUTION: Disconnect the GPS from the DC power adapter when starting the vehicle.  
1 Plug the power adapter into the receiver’s USB port.  
USB Port  
Cigarette lighter  
socket  
2 Plug the other end of the power adapter into the vehicle’s  
12V power socket.  
Car Adaptor  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Heat Pump 5596 1 User Manual
Insignia Flat Panel Television NS F14TV User Manual
JVC Speaker MX J570V User Manual
Kenmore Washer MFL67360428 User Manual
Kenwood Automobile Parts CAW DW1300 User Manual
Kenwood Car Stereo System KAC8101D User Manual
Kenwood Portable Radio MDX F1 User Manual
KitchenAid Clothes Dryer 86 User Manual
KitchenAid Ice Maker KUIS155HPB0 User Manual
Kodak Printer Accessories E 142 User Manual