The Konica Minolta Guide to LDAP
This guide details how to set up the:
Bizhub 250/350, 420/500, 361/421/501, 600/750
Bizhub C250, C252, C300, C351, C352, C450
Bizhub C203, 253, 451, ,550, 650
Created by Hotline Support
Konica Minolta Hotline Support (UK)
V1.2
Download from Www.Somanuals.com. All Manuals Search And Download.
As a rough guide you can find the domain by right clicking ‘My Computer’ and going
in to the Properties. Under the ‘Computer Name’ tab it will say ‘Domain’ as below.
The basic rule for the Search Base is if the customer has a separate container of
employee e-mail addresses that are outside of the root of the domain this must also
be specified. If they do not, you only need to input the root.
For example, the customer has a container called Sales, and his domain is
mydomain.co.uk. The search base would be: ou=Sales,dc=mydomain,dc=co,dc=uk
Without the Sales container, it would be dc=mydomain,dc=co,dc=uk(Searches entire
domain)
My Computer Properties
10) Press the ‘FWD’ button to progress to the next screen
11) These next settings are very much dependent on the customer’s server and how
it has been set up. For example, the Hotline in Basildon runs on a different network
to the LDAP server. On our machines, we have to set the ‘General Settings’ to
‘Simple’ but on the next screen we have to force the domain within the User Name.
On other machines in the building that are on the same network as the server,
‘General Settings’ are set to GSS-SPNEG0 and the domain does not need to forced.
Download from Www.Somanuals.com. All Manuals Search And Download.
12) Press the ‘FWD’ button to progress to the next screen
13) Enter the ‘Login Name’ and ‘Password’ of an account that is set up on the server.
This is us
forcing
the
domain
14) Enter in the ‘Domain Name’ as discovered in Step 9.
15) Press the ‘FWD’ button to progress to the next screen
16) Set as required
On the machine, a ‘Check Connection’ button will appear here. Once you
have entered the settings, press on this button to ensure the machine can
see the LDAP server
Set up of LDAP is now complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also set this up via a web browser.
To do this, follow the instructions below:
1) Enter the IP address of the Konica Minolta machine into Internet Explorer and
press Go
2) Log into the web page using the Admin code for the machine. Depending on
which machine you have, this will either be 8 x 0’s (00000000) or 12345678.
3) Click on the Network tab at the top of the screen
4) Then click on LDAP
5) Once you have input the settings, be sure to click on ‘Check LDAP Setting’
Download from Www.Somanuals.com. All Manuals Search And Download.
Bizhub 250/350
Setting up via the Web Browser-
It is easier to configure the Bizhub 250/350 via the web interface.
1) Log into Admin Mode using the code of 8 x 0’s (00000000) and click on
the Network tab. Make sure you enable LDAP under the ‘LDAP’ heading
before you go into ‘LDAP Server Setting’
2) Select any available set of 3 dashes(allowed up to 5 servers) we will
assume Hot2003 does not exist
3) The LDAP Server screen opens as below, you may need to force the domain as
shown. Search base will be your FQDN in dc=, format. Domain Name would be
your normal domain logon name.
Forcing the
Domain
Download from Www.Somanuals.com. All Manuals Search And Download.
Bizhub C203 – 650 (Bizhub 361-501 is similar)
Setting up via the Control Panel –
At Machine:
1. Press Utility/Counter
2. Press “Administrator Settings”
3. Enter the Administrator Password, default = 12345678 and press “OK”
4. Press “Fax Settings”
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press “Function Settings”
6. Press “Forward TX Setting”
7. Press all as arrowed then “Select from Address Book”
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Here you have a couple of options, you can select “Index” and search for a
recipient or select “Destination Type” and “E-Mail” then select the recipient.
The latter is shown below
8. Press “OK” you will then be returned to the screen as in 7 only this time
you will see your selected recipient in the Forward Dest. Dialogue box.
9. Press “OK” then “Close” until back to main screen
Setting up via the Web Interface-
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Enter the IP address of the Konica Minolta machine into Internet Explorer
and press Go
2. Log into the web page using the Admin code for the machine.
Default = 12345678.
3. Click on the Network tab at the top of the screen
4. Then click on LDAP Setting and set to Enable
4) Select “Setting Up LDAP” and select any available radio button. we will
assume Hot2003 does not exist.
5. Select “Edit”
6. Enter you network settings in the dialogue box’s including password. The copier will
use the Admin credentials to interrogate LDAP (none of this is seen by end user)
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select “OK” you will then be returned to the screen as in 5-6 above, where
you can ‘Test’ the connection. If all OK you can Logout.
To use the LDAP search function the procedure will vary slightly depending on
the machine model. For this example we will use the Bizhub C550.
For File Type selection please refer to the relevant User Manual
User Mode:
1. Place Document(s) in document feeder
2. Select “FAX/SCAN”
3. Select Address Search Tab
4. Select “Search”
5. Enter firstname or lastname or part thereof
6. Select “Start Search”
7. Machine will retrieve names from the LDAP server matching search criteria
8. Select Recipient(s) - *Select “Name-Dest” then name*Only if Fax Unit Fitted
9. Select “OK”
10. Press “Start”
Setting up and Printing using User Authentication on
Bizhub’s C203-C650
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine used for Example Bizhub C550
Login to the machine’s web browser as Administrator
Set up machine to “look” at LDAP Server before enabling
Authentication , if machine can already search LDAP for basic email search
then any errors with this set up will most likely be due to configuration and not
machine.
Click on “Security” then “External Server Registration” then “Edit”
Click on “Edit” and enter details as per your network
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “OK” then “OK” to confirmation message, you will then be returned to the screen
shown previously only now you will see the server listed. You can add multiple servers if
required
Click on “User Auth/Account Track” enable function as “General Settings” highlighted
below
Download from Www.Somanuals.com. All Manuals Search And Download.
Showing Enabling User Authentication - option can be set for Public User Access for
BW access if required. Default Function permissions can also be set if required, eg: Total
copy/print restriction (ALL users).
Click “OK” to all Messages then Logout.
User Mode
User is shown Logon Screen on Copier consisting of:
• Username (1)
• Password (2)
• Domainname (3)
(1) Users Domain Login Name
(2) Users Domain Password
(3) No need to touch (fixed - unless multiple servers/domains are used)
Press “Login”
The Machine will now Authenticate against the Domain Controller all
machine functions should now be available.
NB:Once a user has successfully logged into the machine an account will be
created on the machine consisting of “username” for usage accounting tracking
purposes
Download from Www.Somanuals.com. All Manuals Search And Download.
|