2
XQ
Operation and Safety Notes
Operation and Safety Notes........................................................................................ Page
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Content
Before reading, unfold the page containing the illustrations
and familiarise yourself with all functions of the device.
The following icons/symbols are used in this instruction manual:
Read instruction manual!
Wear particle mask!
Observe caution and safety notes!
Wear protective gloves!
m
Caution – electric shock! Dangerous electric
current – danger to life!
Wear safety goggles!
c
Rated idle running speed
Wear ear protection!
n0
Watt (performance)
Proper procedure and handling.
W
Voltage
V~
Introduction
Your safety..................................................................................................... Page
Proper use...................................................................................................... Page
Features......................................................................................................... Page
Included items................................................................................................ Page
Technical information..................................................................................... Page
6
6
6
6
6
Safety
Safety advice relating to this specific tool ...................................................... Page
6
Operation
Switching on and off ...................................................................................... Page
Vacuum dust extraction.................................................................................. Page
Attaching/detaching sanding sheets.............................................................. Page
Rotating the backing plate.............................................................................. Page
Advice on use................................................................................................. Page
7
8
8
8
8
Maintenance and cleaning...................................................................... Page
9
9
Disposal.......................................................................................................... Page
Information
Service........................................................................................................... Page
Declaration of conformity/Producer............................................................... Page
9
9
UK/IE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction/Safety
Palm detail sander XQ2
Ideal for sanding, polishing, de-rusting and
much more
L Included items
1 Palm detail sander XQ2
6 Sanding sheets (2 No. of each grade 60/80/100)
1 Adapter for external vacuum extraction
1 Reducer piece for external vacuum extraction
1 Operating instructions
L Introduction
1 Booklet “General safety advice”
1 Booklet “Guarantee and service”
1 Order form for sanding sheets
L Your safety
Make sure you familiarise yourself fully
with the way the product works before
you use it for the first time and that you
L Technical information
understand how to handle electrical power tools
correctly. Further details can be found in the operat-
ing instructions. In addition, you must also observe
the general safety advice contained in the accom-
panying booklet. Use the product only as described
and for the indicated purposes. Keep these instruc-
tions in a safe place. If you pass the product on to
anyone else, please ensure that you also pass on all
the documentation.
Nom. power input:
Nominal voltage:
Nominal speed:
Nom. oscillation speed:
Backing plate:
Radius of oscillation:
Sound pressure level:
Sound power level:
Hand/arm vibration:
Protection class:
160W
230V~50Hz
n0 13.000min-1
n0 26.000min-1
360° rotatable
1.6mm
76dB(A)
90dB(A)
1,24m/s2
&
II/
L Proper use
The palm detail sander is intended for dry sand-
ing and polishing of wood, plastic, metal, filler and
painted surfaces. The product is intended exclusively
for domestic use. Any other use or modification to
the belt sander shall be considered as improper
use and could give rise to considerable dangers.
The manufacturer will not accept liability for loss or
damage arising from improper use.
L Safety
Safety advice relating to this
specific tool
J
J
Keep children away from the tool.
Store the tool indoors in an enclosed,
dry place where it cannot be reached
by children.
L Features
Q
Mains lead
Adapter for external vacuum extraction
Reducer piece for external vacuum extraction
Release button - dust collection box
Dust box for internal vacuum extraction
Safety filter
Adapter port
Ventilation slots
To avoid danger to life from electric
shock:
W
E
R
Frequently check the condition of the
tool, mains lead and plug. Do not use
the tool if these types of parts are
T
Y
U
damaged. Never open up the tool. Always have
any repairs carried out or replacement parts
fitted at the service centre or by an electrical
equipment repair specialist. A damaged tool,
I
O
Patented backing plate (360° rotatable)
On/off switch
P
6
UK/IE
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety/Operation
mains lead or plug presents a serious danger to
life from electric shock.
J Avoid sanding paints containing lead or other
substances hazardous to health.
J Have repairs carried out only by an electrician or
the relevant service centre.
J Do not operate the device if it is damp and do not
use it in a damp environment.
J Do not sand any material containing asbestos.
J Firmly support the workpiece (in a clamp or vice)
unless its own weight is enough to keep it in
place.
J If you use the device outdoors, always connect
it through a residual current device with a maxi-
mum trip current of 30mA.
J Avoid contact with the moving sanding belt.
J Operate the tool only with an attached sanding
sheet.
J If using an extension lead always use one that is
approved for outdoor use.
J Do not abrade moistened materials or damp
surfaces.
J Do not use the tool in rain or in wet conditions.
Q
J Always work with the mains lead leading
away from the rear of the device.
Proper procedure and handling:
J Never use the tool for a purpose for which it was
not intended nor with non-original parts/acces-
sories.
To avoid the danger of injury, burning
and damage to health:
J Always switch on the device before placing it
against the workpiece. After abrading, lift the
device from the workpiece before switching it off.
J When working always hold the device securely
with both hands. Always keep proper footing and
balance.
J Allow the device to come to a complete standstill
and switch it off before you put it down.
J When taking a break from your work, before
carrying out any tasks on the device itself (e.g.
changing the sanding belt) and when you are not
using the device, always pull the mains plug out
of the mains socket.
m Danger of fire from flying sparks!
J Warning! Be aware that persons operating the
tool or in its vicinity may be at risk of being in
contact with or inhaling dusts.
Take all the necessary safety precautions in
relation to dusts. Working with this tool can give
rise to dusts that may be hazardous to health,
inflammable or explosive.
Harmful or poisonous dusts can, for example,
arise from sanding paints containing lead, or
from certain types of hardwoods or metals.
Some dusts are classed as carcinogenic. Wear
a breathing mask and use a suitable dust/chip
vacuum extraction device.
J Always keep the device clean, dry and free of oil
or grease.
J Warning! Keep your working area clean.
Mixtures of materials can be particularly danger-
ous. Light metal dust, for example, may burn or
explode.
J Remain alert at all times! Always watch what you
are doing and proceed with caution.
Do not use the device if you cannot concentrate
or you are feeling unwell.
J When sanding wood and in particular when
working on materials that give rise to dusts that
are hazardous to health, the sander must be
connected to a suitable external dust extraction
device.
L Operation
J
Wear protective glasses, hearing
protection, dust protection masks and
protective gloves.
L Switching on and off
Caution! Before connecting to the electricity supply,
J Ensure that there is adequate ventilation when
ensure that the palm detail sander is switched off.
working on plastic, paint, varnish etc.
UK/IE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Switching on
j Slide the hose of a suitable dust extraction de-
vice approved for that purpose (e.g. a workshop
vacuum cleaner) on to the adapter for external
P
j Push the On/Off switch upwards into
position “1”.
W
E
vacuum extraction or the reducer piece
.
Switching off
P
j Push the On/Off switch downwards into
Removal:
position “0”.
j Pull the hose of the dust extraction device off the
W
adapter for external vacuum extraction
j Pull off the adapter for external vacuum
W
.
L Vacuum dust extraction
extraction
.
Warning! Danger of fire! There is the danger of
fire when working with electrical devices that have
a dustbox or can be connected to a vacuum cleaner.
Under certain conditions the wood dust in the dust
extraction bag (or in the vacuum‘s dust bag) may
ignite, e.g. as a result of flying sparks generated
when abrading metals or metal objects left in wood.
This can happen particularly if the wood dust is
mixed with paint residue or other chemicals and the
abraded particles are hot from prolonged abrasion.
Therefore you must empty the dust box and the
vacuum cleaner’s dust bag before taking a break or
stopping work and always avoid overheating of the
abraded particles and the tool.
L Attaching/detaching sanding sheets
Attaching
j Sanding sheets are easily attached to the
O
backing plate by means of the hook and pile
fastening.
Detaching
j Simply pull the sanding sheet off the backing
O
plate (see Fig. C).
L Rotating the backing plate
Wear a dust mask!
j Switch off the tool.
O
j Rotate the backing plate into the desired
position (see Fig. D).
Adapter for internal vacuum extraction
Connection:
T
j Slide the dust extraction box on to the adapter L Advice on use
U
port until you hear it engage.
j Switch the tool on before placing it against the
workpiece.
j Press the release button of the dust extraction j Apply light sanding pressure.
Removal:
R
T
box and withdraw it towards the rear of the
device.
j Advance the tool at an even rate.
j Work in parallel and overlapping widths.
j Tap it on a robust object.
Sanding and surfaces
The sanding output and the quality of the surface
finish are determined by the grade of grit on the
sanding sheet.
Adapter for external vacuum extractor
Connection:
W
j Push the adapter for external vacuum extraction
U
into the adapter port . If it is necessary to use
Tips and tricks
E
the reducer piece push the reducer piece into
j Change sanding sheets at the appropriate time.
j Avoid sanding metal and other materials with the
same sanding sheet.
W
the adapter for external vacuum extraction
.
8
UK/IE
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation/Maintenance and cleaning/Disposal/Information
j Sand difficult to reach places with the front or
L Information
O
side corners of the backing plate
.
L Service
L Maintenance and cleaning
Details of the Service Centre responsible for your
region are shown in the warranty documents.
Attention: before starting any work on your sander,
always pull the plug out of the mains socket.
j Remove any dirt from the tool, surfaces and
other items in the working area immediately
after you finish work.
L Declaration of conformity/
Producer
Y
j Clean the safety filter of the dust extraction
We, Kompernaß GmbH, Burgstr. 21, D-44867
Bochum, Germany, hereby declare that this product
T
box by pulling the safety filter out of the dust
T
extraction box . Suck out the debris carefully with complies with the following EU directives:
a vacuum cleaner using a low suction pressure.
j Clean the tool and remove any adhering dust
Machinery Directive (98/37/EC)
with a narrow paint brush.
j Never any kind of sharp object or petrol, solvents Low voltage directive (73/23/EEC)
or cleaning agents that might attack plastic. Do
not allow any liquids to enter the inside of the
tool.
j Always keep the ventilation slots clear.
Electromagnetic compatibility (89/336/EEC)
I
Applicable harmonized standards
EN60745-1:2003+A1, EN60745-2-4:2003,
EN55014-1:2000+A1+A2, EN55014-2:1997+A1,
EN61000-3-2:2000+A2, EN61000-3-3:1995+A1,
EN50366:2003
L Disposal
The packaging consists entirely of envi-
ronmentally-friendly materials. It can be
disposed of at your local recycling facility.
and confirm this with the CE symbol.
Type/Machine designation:
Do not dispose of electric tools in
the household waste!
Palm detail sander XQ2
In accordance with European Directive 2002/96/EC Bochum, 01.07.2006
about waste electrical and electronic equipment and
its transposition into national legislation, worn out
electric tools must be collected separately and taken
for environmentally compatible recycling.
Hans Kompernaß
Contact your local refuse disposal authority for more
details of how to dispose of your eletric tools.
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
UK/IE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
|