2-GEAR
HAMMER DRILL
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
PSBM 850
2-GEAR HAMMER DRILL
GB/IE/CY
Operation and Safety Notes
Page
5
Operation and Safety Notes
Kompernaß GmbH
Burgstraße 21
44867 Bochum
(Germany)
Last Information Update:
04/2008 · Ident.-No.: PSBM850042008-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of content
Introduction
Proper use .....................................................................................................................Page
Features and equipment...............................................................................................Page
Included items...............................................................................................................Page
Technical data...............................................................................................................Page
6
6
7
7
General safety advice for electrical power tools
1. Workplace safety.....................................................................................................Page
2. Electrical safety........................................................................................................Page
3. Personal safety.........................................................................................................Page
4. Careful handling and use of electrical power tools..............................................Page
Safety advice for hammer-action drills.......................................................................Page
8
8
8
9
9
Caution utility services! ................................................................................................Page 10
Original accessories/attachments.............................................................................Page 10
Have you understood everything?..............................................................................Page 10
Before first use
Attaching the auxiliary handle....................................................................................Page 10
Inserting a tool into the chuck......................................................................................Page 10
Opening the chuck.......................................................................................................Page 10
Tightening the chuck.....................................................................................................Page 10
First use
Switching on and off ....................................................................................................Page 11
Infinitely adjustable speed setting...............................................................................Page 11
Preselecting the rotation speed ...................................................................................Page 11
Selecting the direction of rotation...............................................................................Page 11
Selecting the gear ........................................................................................................Page 11
Switching between drilling/hammer-action..............................................................Page 11
Screwdriving .................................................................................................................Page 12
Servicing and cleaning .................................................................................Page 12
Disposal......................................................................................................................Page 12
Information
Service centre ...............................................................................................................Page 12
Declaration of conformity/Producer..........................................................................Page 13
GB/IE/CY
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The following pictograms are used in these operating instructions/on the device:
Read instruction manual!
Drilling
Observe caution and safety notes!
Impact drilling
Wear hearing protection, dust protection
mask, protective gloves and protective
glasses.
Caution–electric shock!
Danger to life!
Keep children away from electrical
power tools!
Explosive material!
Risk of fire!
Protect electrical power tools from
moisture!
Check that the device, mains lead
and plug are in good condition!
Volt (AC)
V
~
Dispose packaging and appliance in
an environmentally-friendly way!
Watts (Effective power)
Safety class II
W
Quick-release chuck, Made in Germany
2-speed hammer-action drill
PSBM 850
metal, ceramics and plastic. The clockwise/counter
clockwise rotation direction switch also allows the
device to be used as a driver. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
risk of accident. The manufacturer will not accept
liability for loss or damage arising from improper use.
Q
Introduction
Please make sure you familiarise yourself
fully with the way the device works before The device is not intended for commercial use.
you use it for the first time and that you
understand how to handle electrical power tools
Figures A–E show the various possible applications
correctly. To help you do this please read the accom- and uses.
panying operating instructions. Keep these instructions The tools and materials shown in the example
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.
applications are not included with the product.
Q
Features and equipment
Q
1
Proper use
Drill/hammer-action switch
ON/OFF switch
Lock switch
2
3
4
The tool is intended for Impact drilling into brick,
concrete and stone as well as drilling into wood,
Speed preselector wheel
6
GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
5
6
7
8
9
Rotation direction switch
Gear selector switch
Auxiliary handle
Quick-release chuck
Depth stop
Impact drilling in concrete:
max. Vibration emission value
a
h, ID= 14.718m/s2
Uncertainty
K = 2.705m/s2
Drilling in metal:
Q
Included items
max. Vibration emission value
a
h, D= 2.363m/s2
1 Hammer-action drill PSBM 850
1 Auxiliary handle
Uncertainty
K = 1.5m/s2
1 Depth stop
1 Carry case
1 Operating instructions
1 „Warranty and service“ booklet
WarNING! The vibration level given in these
instructions has been measured in accordance with
a standardised measurement procedure specified
in EN 60745 and can be used to compare devices.
Different uses of the device give rise to different vibra-
tion levels and in many cases they may exceed the
values given in these instructions. It is easy to underes-
timate the vibration load if the electrical power tool is
used regularly in particular circumstances.
Q
Technical data
Nom. voltage:
Rated power:
No-load rotational
speed:
230V 50Hz
850W
~
1st gear max. 1450 min–1 Note: If you wish to make an accurate assessment
2nd gear max. 3400 min–1 of the vibration loads experienced during a particu-
Impact cycles:
Chuck:
16 times rotation speed
lar period of working, you should also take into
account the intervening periods of time when the
device is switched off or is running but is not actual-
ly in use. This can result in a much lower vibration
load over the whole of the period of working.
Chuck capacity:
Drilling in steel:
Drilling in wood:
Impact drilling in
concrete:
1.5 – 13 mm
max. ø 13mm
max. ø 30mm
max. ø 16mm
max. ø 8mm
Screwing in wood:
Screwing in sheet steel: max. ø 6.3mm
Protection class: II/
Noise and vibration data:
Values determined in accordance with EN 60745.
The sound pressure level (A-weighted) of the
device is typically 90dB(A). Uncertainty K = 3dB.
The sound level while working can exceed 101dB(A).
Wear ear protection!
GB/IE/CY
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety advice for electrical power tools
General safety advice for
electrical power tools
c)
Keep the device away from
rain or moisture. Water entering
an electrical device increases the
read all the safety advice
risk of electric shock.
WarNING!
and instructions!
Failure to observe the safety advice and instructions
d)
Do not use the mains lead for
any purpose for which it was
may result in electric shock, fire and/or serious injury.
not intended, e.g. to carry the
device, to hang up the device or to pull
the mains plug out of the mains socket.
Keep the mains lead away from heat,
oil, sharp edges or moving parts of the
device. Damaged or tangled mains leads in-
crease the risk of electric shock.
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS
IN A SAFE PLACE FOR FUTURE REFERENCE!
1. Workplace safety
e) When working outdoors with an
electrical power tool always use ex-
tension cables that are also approved
for use outdoors. The use of an extension
cable suitable for outdoor use reduces the risk
of electric shock.
f) Use a residual current device (rCD)
for protection if operating the electri-
cal power tool in a moist environment
is unavoidable. The use of an RCD reduces
the risk of electric shock.
a) Keep your working area clean and
well lit. Untidy or poorly lit working areas
can lead to accidents.
b)
Do not work with the device
in potentially explosive en-
vironments in which there
are inflammable liquids, gases or
dusts. Electrical power tools create sparks,
which can ignite dusts or fumes.
c)
Keep children and other
people away while you are
operating the electrical tool.
Distractions can cause you to lose control of
the device.
3. Personal safety
a) remain alert at all times, watch what
you are doing and always proceed
with caution. Do not use the device if
you are tired or under the influence
of drugs, alcohol or medication. One
moment of carelessness when using the device
can lead to serious injury.
2. Electrical safety
To avoid danger to life from
electric shock:
a) The mains plug on the device must match b)
the mains socket. The plug must not
be modified in any way. Do not use
an adapter plug with devices fitted
with a protective earth. Unmodified
plugs and matching sockets reduce the risk of
electric shock.
Wear personal protective
equipment and always wear
safety glasses. The wearing of
personal protective equipment such as dust
masks, non-slip safety shoes, safety helmets or
ear protectors, appropriate to the type of elec-
trical power tool used and work undertaken,
reduces the risk of injury.
b) avoid touching earthed surfaces such
as pipes, radiators, ovens and refrig-
erators with any part of your body.
There is an increased risk of electric shock if
c) avoid unintentional operation of the
device. Check that the electrical pow-
er tool is switched off before you
connect it to the mains, pick it up or
your body is earthed
.
8
GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety advice for electrical power tools
carry it. Accidents can happen if you carry
the device with your finger on the ON/OFF
switch or with the device switched on.
e) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their origins
in poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
d) remove any setting tools or spanners
before you switch the device on. A tool
or spanner left attached to a rotating part of a
device can lead to injury.
e) avoid placing your body in an unnat-
ural position. Keep proper footing
and balance at all times. By doing this
you will be in a better position to control the
device in unforeseen circumstances.
f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep your g) Use the electrical power tool, acces-
hair, clothing and gloves clear of mov-
ing parts. Loose clothing, jewellery or long
hair can become trapped in moving parts.
sories, inserted tools etc. in accord-
ance with these instructions and
advice, and the stipulations drawn
up for this particular type of device.
In doing this, take into account the
working conditions and the task in
hand. The use of electrical power tools for
purposes other than those intended can lead to
dangerous situations.
4. Careful handling and use of
electrical power tools
a) Do not overload the device. always
use an electrical power tool that is
intended for the task you are under-
taking. By using the right electrical power
tool for the job you will work more safely and
achieve a better result.
Safety advice for
hammer-action drills
b) Do not use an electrical power tool if
its switch is defective. An electrical power
tool that can no longer be switched on and off
is dangerous and must be repaired.
c) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or
when the device is put away. This pre-
caution is intended to prevent you from uninten-
tionally starting the device.
d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone
use the device if he or she is not fa-
miliar with it or has not read the
instructions and advice. Electrical power
tools are dangerous when they are used by
inexperienced people.
J
J
Use the auxiliary handle supplied
with the device. Loss of control of the tool
can lead to injury.
Wear hearing protection during use.
The effect of noise can cause hear-
ing loss.
J
J
J
J
Secure the workpiece. Use clamps or a vice to
grip the workpiece firmly.
If a dangerous situation arises, pull the mains
plug immediately out of the mains socket.
Always work with the mains lead leading
away from the rear of the device.
Do not allow the ventilation slots to become
covered while the device is operating. Do not
insert any objects into the ventilation slots.
DaNGEr OF FIrE FrOM FLY-
ING SParKS! Drilling or abrading
metal creates flying sparks.
J
GB/IE/CY
9
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety advice for electrical power tools/Before first use
Always make sure that nobody is placed in
any danger and that there are no inflammable
materials near the working area.
you now know about all the functions of and how
to handle your electrical power tool, you are finally
in a position to start work. Observing the manufac-
turer‘s instructions and advice will maximise your
WarNING!
HaZarDOUS DUSTS!
Working with harmful/poisonous dusts presents safety while working with the device.
a danger to health for the tool operator and
any persons in the vicinity.
Q
Wear safety glasses and a dust
protection mask!
Avoid drilling paints containing lead or other
substances hazardous to health.
Before first use
Q
J
J
attaching the auxiliary handle
Do not drill or abrade materials containing
asbestos. Asbestos is a known carcinogen.
Do not drill moist materials or damp surfaces,
When working always hold the device securely
with both hands.
For safety reasons this tool must always be used
7
with the auxiliary handle
in place.
J
J
7
j
Place the auxiliary handle
on the spindle
collar and bring it round into the desired position.
7
J
If the inserted tool jams, switch off the electrical
power tool immediately. Be prepared for high
reaction torques as they may cause kickback.
Always keep the device clean, dry and free of
oil or grease.
Tighten the auxiliary handle
If necessary fit the depth stop
in position.
.
9
j
J
Q
Inserting a tool into the chuck
WarNING!
Switch the device off and pull the plug out of the
mains socket before carrying out any work on the
DaNGEr OF INJUrY!
Q
Caution utility services!
m DaNGEr! Ensure that you do not strike device.
electrical cables, gas or water pipes when
you are working with the electrical pow-
er tool. Check a wall using a suitable detector
Q
Opening the chuck
before you drill or cut slots.
Note: The directions of rotation are given relative
to the device being held by you in the working
position/„drill chuck pointing away from you“.
Your 2-speed hammer-action drill has a fully auto-
Q
Original accessories/
attachments
matic spindle lock
and is fitted with a single
Use only the accessories and attachments sleeve chuck “Made in Germany” by
.
detailed in the operating instructions.
8
The use of inserted tools or accessories other than
those recommended in the operating instructions
could lead to you suffering an injury.
The quick-release chuck
allows you to exchange
drills or other tools without using a special key etc.
The drive chain is locked when the motor comes to
8
standstill so that the quick-release chuck
can be
opened by turning it
.
Q
Have you understood
everything?
Q
Tightening the chuck
Once you have made yourself familiar with this
general safety advice for electrical power tools, and
with the help of the device’s operating instructions
After you have selected and inserted the tool and
fixed the inserted tool in place by the turning the
10 GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Before first use/First use
8
drill chuck
you can use the tool. The spindle
j
The most suitable speed depends on the mate-
rial involved. We recommend that you carry
out a few practical tests beforehand.
lock releases automatically when the motor starts.
Q
First use
Tip: You will always find these two basic guide-
lines helpful:
The mains voltage at the mains socket must match
that shown on the rating plate on the device. Devic-
1. Large drill diameter = lower speed whilst
smaller drill diameter = higher speed
es marked with 230V can also be operated at 220V. 2. Hard material = lower speed
Q
Q
Switching on and off
Selecting the direction of
rotation
When operating the hammer-action drill you can
select between intermittent or continuous operation
mode. Use intermittent operation mode for shorter
drilling jobs and continuous operation mode for
longer drilling jobs. In either mode the device func-
tions as follows:
CaUTION! Only change the position of the rota-
5
tion direction switch
after the device has come
to a standstill.
j
Set the direction in which you wish the drill to
5
rotate by using the rotation direction switch
.
To switch on intermittent operation mode:
2
j
Press the ON/OFF switch
.
Q
Selecting the gear
To switch off intermittent operation mode:
2
6
j
Release the ON/OFF switch
.
CaUTION! The gear selector switch
must only
be moved after the device has come to a standstill.
To switch on continuous operation mode:
2
.
j
Press the ON/OFF switch , keep it pressed
j Select the speed range using the gear selector
3
6
and press the lock switch
switch
:
To switch off continuous operation mode: 1 = low speed range
2
j
Press and then release the ON/OFF switch
.
2 = high speed range
Q
Infinitely adjustable speed
setting
2
The ON/OFF switch
control.
has a variable speed
Q
2
j
Pressing the ON/OFF switch
speed.
increases the
Switching between drilling/
hammer-action
1
Note: The drill/hammer-action switch
must
Q
Preselecting the rotation speed only be moved after the device has come to a
standstill.
You can pre-select the required speed in ratchet
4
steps (A-F) using the speed preselector wheel
.
GB/IE/CY 11
Download from Www.Somanuals.com. All Manuals Search And Download.
First use/Servicing and cleaning/Disposal/Information
Drilling:
Set the drill/hammer-action switch
right into the position.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out devices.
1
j
to the
to the
Q
Impact drilling:
Information
1
j
Set the drill/hammer-action switch
left into the position.
Q
Service centre
Note: The hammer-action drilling mode is intend-
ed for drilling into brick, concrete and stone only.
The service centre for your country is shown in the
warranty documentation.
WarNING!
Have your device repaired
Q
Screwdriving
only by qualified specialist personnel
using original manufacturer parts
only. This will ensure that your device remains
safe to use.
j
The screwdriver attachments and bits must match
the screw head. Set the drill/hammer-action
1
WarNING!
switch
to the drill symbol and select 1st gear.
If the plug or mains lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or his service centre. This
will ensure that your device remains safe to use.
Q
Servicing and cleaning
WarNING!
DaNGEr OF INJUrY!
Switch the device off and pull the plug out of the
mains socket before carrying out any work on the
device.
j
Do not allow any liquids to enter the device.
Use a cloth to clean the device.
j
j
Clean the device after you have finished using it.
Do not under any circumstances use petrol or
strong solvents.
j
Store the device in a dry room.
Q
Disposal
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
In accordance with European Directive 2002/96/EC,
worn out electrical power tools must be collected
separately and taken for environmentally compatible
recycling.
12 GB/IE/CY
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Q
Declaration of conformity/
Producer
We, Kompernaß GmbH, Burgstr. 21,
44867 Bochum, Germany, hereby declare that this
product complies with the following EU directives:
Machinery Directive
(98/37/EC)
EU Low Voltage Directive
(2006/95/EC)
Electromagnetic Compatibility
(2004/108/EC)
Type/Description of product:
2-speed hammer-action drill PSBM 850
Bochum, 30.04.2008
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
GB/IE/CY 13
Download from Www.Somanuals.com. All Manuals Search And Download.
|