Kompernass Bread Maker kh 2230 User Manual

Before using your bread-maker …

In order to ensure the safe transport of your new automatic bread-maker, the

unit contains transport safety devices that must be removed before use.

ꢀ ꢁ

Unpack the unit and remove the outer packaging. Then place the

unit on a flat and stable surface.

FIG 1.

FIG 2.

FIG 3.

FIG 4.

1. Now open the baking chamber of the unit. (FIG. 1.)

2. Remove the cardboard spacer inserts. (FIG. 2.)

3. Tilt the two baking tins forward or backward slightly and lift them

out of the bread-maker. (FIG. 3.)

4. Below the tins, there are four pairs of silicon pads in recesses in

the base, as shown at the left. (FIG. 4. and FIG. 5.)

5. Grasp the silicon pads with your fingers and remove them. You

may need to loosen the silicon pads, e.g. with the aid of a tooth-

pick. (FIG. 4.)

6. The removed silicon pads (8 pieces) are shown in FIG. 6..

FIG 6.

(8 pieces)

FIG. 5. Overhead view of the

open bread-maker

Silicon pads

FIG 5.

Silicon pads

Download from Www.Somanuals.com. All Manuals Search And Download.

KH 2230

OPERATING MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

FOLLOW THESE SAFETY INSTRUCTIONS CLOSELY:

•

Read all instructions thoroughly.

Do not touch any hot surfaces. Use handles, knobs or a potholder.

Do not close or clog the steam vent openings. A steam outlet to a certain degree is normal. Do not

cover the steam vent openings.

•

To avoid the danger of electric shock, do not immerse the lead, plug or any other part of this bread

machine in water or other liquids.

•

Electric appliances should not be used by or near children unless they are under close supervision.

Unplug the power supply lead when the appliance is not in use, or before cleaning. Allow it to cool

down before putting on or taking off any parts.

•

Do not use or operate the appliance with a damaged lead or plug or after the appliance

malfunctions or has been damaged in any way. Return the appliance to the nearest authorized

service facility for inspection, maintenance and repair.

•

The use of accessory attachments not recommended or sold by the manufacturer may cause injuries.

Do not use the bread machine outdoors.

Do not let the power supply lead hang over sharp edges or come into contact with hot surfaces.

Do not place the appliance on or near any hot gas, electric burners, or a heated oven.

Extreme caution must be used when moving the appliance with hot or liquid contents.

To disconnect the appliance from the mains, press STOP and then remove the plug from the socket.

Always pull on the plug itself and never on the lead.

•

Do not use the bread machine for any other than the intended purpose.

Avoid contact with moving parts while they are operating.

Ingredients must be poured only into the baking tins. This must be done before placing the baking

tins into the appliance.

•

Do not use the appliance in the vicinity of explosive and/or inﬂammable gases.

The appliance is intended for household use only and not for commercial or industrial use.

To avoid damaging the machine, do not place the baking tin or any object upon the unit.

Do not clean with scouring pads. Pieces can break off the pad and touch electrical parts, creating

the risk of electric shock.

•

Do not use the bread machine for storage purposes or insert any utensils, as they may cause a

ﬁre or electric shock.

The power-supply lead quite short so as to reduce the risk of becoming entangled with or tripping

over keep it. An extension lead may be used, provided that the necessary caution is exercised.

If an extension lead is used, make sure that the speciﬁed electrical rating of the extension lead is at

least as high as the electrical rating of the appliance.

The lead should be arranged in such a way that nobody can trip over it accidentally and children

cannot pull on it.

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

TABLE OF CONTENTS

BFEORE YOUR FIRST USE

ABOUT YOUR BREAD MACHINE

KNOW YOUR BREAD MACHINE

CONTROL PANEL

SETTINGS

USING YOUR BREAD MACHINE

USING THE TIMER

MEINTENANCE AND CLEANING

HELPFUL INFORMATION ABOUT INGREDIENTS

RECIPE TIPS

BREAD MACHINE CYCLE TIMES

RECIPES

QUESTIONS AND ANSWERS / TROUBLESHOOTING

BEFORE FIRST USE

Before ﬁrst usage, please read this Instruction Manual thoroughly and keep it handy for future

reference. Please pay particular attention to the safety instructions.

Carefully unpack the bread machine and remove all packaging materials. To remove any dust that

may have accumulated during packing, wipe the baking tins, kneading blades and outer surface of

the bread machine with a clean, damp cloth. Do not use scouring pads or any abrasives to clean any

part of the machine.

ABOUT YOUR BREAD MACHINE

•

Your new bread machine is able to bake two 1-pound loaves of bread.

A special EXPRESS-setting makes it possible to complete the bread-making process in a shorter time.

This applies to special recipes only.

•

The Fruit and Nut Beep signals at the time when you can add ingredients, such as fruits, nuts or

chips. Instead of being chopped by the kneading blade, the ingredients will maintain their shape

and texture. If you use the TIMER to delay baking, you may add all the ingredients at once and

bypass the function. However, the fruits, nuts or chips may get somewhat chopped in this case.

The colour at the end of the bread crust can be adjusted according to your personal preference.

The TIMER enables you to program the end of the baking process.

The VIEWING WINDOW allows you to observe the bread-making process.

The KEEP WARM function prevents the bread from getting soggy by keeping the ﬁnished bread

warm up to an hour after the completion of the baking process. This function stops when the unit

is turned off or unplugged.

•

The machine has got a POWER LOSS MEMORY, which resumes the interrupted cycle after a short-

term power loss.

After unplugging the unit and letting it cool off, remove any spilled ingredients or crumbs from the

baking chamber, using a damp sponge or cloth.

IMPORTANT: Always add the ingredients exactly in the order speciﬁed in the recipe. To obtain the best

results, accurate measuring of ingredients is vital. Do not put larger quantities than recommended into

the baking tin, as this may produce poor results and even damage the bread machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

KNOW YOUR BREAD MACHINE BIFINETT KH 2230

1. Lid

2. Lid Handle

3. Viewing Window

4. Air Vents

5. Baking Tin

6. Baking Chamber

7. Control Panel

8. Main Housing

9. Power Flex

10. Power Plug

11. Drive Shaft

12. Kneading blade

CONTROL PANEL OF THE BIFINETT KH 2230

Note: Please peel off the plastic sticker on the control panel before its ﬁrst use.

Note: When using the touch pad controls, be sure to press the pad until you hear a beep.

WINDOW-DISPLAY

•

Shows the MENU number(s) selected.

Shows the CRUST COLOUR selected.

Shows minute-by-minute baking time countdown.

Shows the DELAY BAKING TIME selected.

TIMER

•

Use this button when setting the TIMER to delay baking.

Press the ꢀ and ꢁ buttons to set the timer for delayed completion.

The arrows move the time up or down in 10-minute intervals. Keep pressing the buttons for

faster movement. The TIMER function is not available on some cycles; check the Bread Machine

Cycle Times.

•

Press this button to select the cycle or cycle combination of your choice. The time needed by the

selected cycle to complete its process appears in the display.

COLOUR

•

By pressing this button, you can either select the desired crust colour or, alternatively, activate the

Express mode.

Choose from Light, Medium or Dark, or activate the Express mode.

START/STOP

•

Press to start the operation of the machine or to begin TIMER countdown for delayed completion.

Keep pressing this button until you hear a beep to stop the operation of the

machine or to cancel a TIMER setting.

Note: Do not press STOP when just checking the progress of bread

Download from Www.Somanuals.com. All Manuals Search And Download.

SETTINGS

BREAD SETTINGS:

Your new bread machine has four bread settings (Basic, French, Wheat, Sweet) and two time modes

(Normal [default setting] and Express). Each bread setting is described below. The baking times in

the Normal time mode vary from 2:00 to 3:30 hours, according to the selected setting or setting

combination. In the Express time mode, the baking times range between 0:45 and 1:50 hours. For

the exact setting times we refer you to the “Bread Machine Cycle Times” schedule. The Normal time

will give you the best results. Only specially designed recipes are appropriate for the Express mode.

Heavy ﬂours and other heavy ingredients are not suitable for this setting. It is possible to make two

different types of bread simultaneously, to make the same type of bread in both baking tins or to

make only one loaf of bread.

BASIC

The basic settings are used for breads that primarily consist of white ﬂour, although some recipes may

include small amounts of whole wheat ﬂour. These settings have the minimum number of rising cycles

and the shortest overall operating times. Therefore, loaves will be slightly denser than French or Sweet

breads. Choose from Basic settings and select the desired crust colour.

FRENCH

Traditionally, French bread has a crispier crust and lighter texture than Basic bread. Recipes for this

kind of bread usually do not include butter, margarine or milk.

WHEAT

In this setting you can make bread with signiﬁcant amounts of heavier types of wheat requiring a

longer knead and rise cycle, such as whole wheat, rye ﬂour, oats or bran. Generally, whole wheat and

multi-grain breads are shorter and denser than basic, French or sweet breads.

SWEET

Use this setting for recipes in which fruit juice, additional sugar or added sweet ingredients such as

coconut ﬂakes, raisins, dried fruit or chocolate are used. Baking temperature in this setting is reduced

and a longer rise cycle gives the loaf a light, airy texture.

USING YOUR BREAD MACHINE

After a setting or setting combination has been selected, your new bread machine will automatically

move through its bread making process down to its completion. Thanks to the automatic TIMER you can

have the machine make bread while you are asleep or otherwise occupied. (See „Using the TIMER“.)

The recipes included in this booklet have been thoroughly tested so as to ensure the best results. They

have been prepared by home economists especially for these bread machines and may not lead to

acceptable results with other bread machines.

FOR ALL BREAD SETTINGS, FOLLOW THESE INSTRUCTIONS:

1. Open the lid and remove the baking tin by pulling it straight upwards. It is important to remove

the baking tin from the unit before putting any ingredients into it. This will prevent accidentally

spilling ingredients into the baking chamber.

Warning: Place the bread machine on a level, stable and safe surface. Ingredients spilled into the

baking chamber can cause ﬁre when ignited by the heating element.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Attach the kneading blades onto the shafts inside the baking tins by lining up the ﬂat side of the

blade with the ﬂat side on the shaft. Push the blade ﬁrmly onto the shaft.

Attention: Be sure to ﬁx the kneading blade ﬁrmly to its place to prevent it from loosening during

its operation, which might have a detrimental effect on the kneading or mixing process. Be sure

the shaft is clean of any residue (i. e. dough). This will keep the kneading blade ﬁrmly ﬁxed in

its place and prevent it from sticking to the shaft.

3. Select a recipe from the recipe section of this booklet and follow these instructions:

Measure the ingredients carefully and accurately. To measure liquids, use a see-through liquid

measuring cup and check the measurement at eye level. When measuring dry ingredients, use a

standard dry measuring cup and level the ingredients with a straight-edge knife. Even a slightly

inaccurate measurement can make a difference in results. Use standard measuring spoons and level

off with a straight-edge knife. (For further information see „Measuring Your Ingredients.“)

Always add the ingredients to the baking tin in the speciﬁed order.

Always add yeast last. Be sure that the yeast does not come into touch with liquid ingredients.

Attention: Be careful not to mix the yeast with any wet ingredients, especially when using the

TIMER feature. Otherwise, the bread may no not rise properly.After 5 minutes of kneading, open the

lid of the bread machine and check the dough consistency. The dough should form a soft, sticky ball.

If it is too dry, add liquid. If it is too wet, add ﬂour (1/2 to 1 tablespoon at a time)

4. Place the baking tin into the unit and push it down until you hear it click ﬁrmly into its place.

Special note: If one of the baking tins is not ﬁxed properly, the blade will not operate.

5. Close the lid. Connect the plug with a 220 – 240-volt-rated AC-outlet. You will hear a beep.

The display will show the default settings of Basic & Basic in its Normal time mode (2:10) for

both baking tins.

6. Choose the desired setting by pressing the MENU button. Each time MENU is pressed you will hear

a beep and the number in the display window will advance to the next cycle. There are 10 preset

combinations. If no selection is made, the default setting is BASIC & BASIC.

Setting combinations:

1 Basic

2 Basic

3 Basic

4 Basic

5 French

6 French

7 French

Basic

Wheat

Sweet

French

Sweet

Wheat

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Wheat

9 Wheat

10 Sweet

Wheat

Sweet

7. Press the COLOUR button to choose the crust colour. When you press the button you will hear a

beep and the display window will show the colour you selected. Alternatively, you can also select

the Express mode with this button.

Note: At this point, you can press the TIMER button to delay the completing of the baking process

for up to 13 hours For further details see Using the Timer.

8. Press the START/STOP button to start the chosen setting. The remaining time will count down in

one-minute intervals. At the end of the baking time a beep will sound ﬁve times.

Bread-making Tip: After 5 minutes of kneading, open the lid of the unit and check the dough

consistency. The dough should form a soft, sticky ball. If it is too dry, add liquid. If it is too wet,

add ﬂour (1/2 to 1 tablespoon at a time).

9. The bread machine is designed with a Keep Warm feature, which automatically begins functioning

as soon as the baking time has ended. This will continue for up to 60 minutes after the end of

the baking process. During this time, the system will circulate hot air to keep the bread warm. You

can turn off the Keep Warm feature before the end of the 60 minutes. Simply press the START/STOP

button and keep it pressed until you hear a beep. UNPLUG THE UNIT AFTER ITS USE! Never leave the

unit plugged in when not in use.

10. The bread machine has a convenient viewing window so that you may observe the progress of the

bread as the bread-making process goes through its stages. Occasionally, some moisture may form

on the window during the bread-making process. You may open the lid to look into the unit during

the mixing and kneading stages. HOWEVER, DO NOT OPEN THE LID DURING THE BAKING CYCLE, as

this may cause the bread to collapse.

Warning: To avoid damaging the bread machine, do not put any objects upon it.

11. To remove the baking tins from the unit, use pot holders or oven gloves and pull the tins

upwards. Turn the tins upside down and shake the bread out onto a wire cooling rack. Do not use

any metal utensil to remove the bread, as they may scratch the non-stick surface. If you have

difﬁculty removing the bread from the baking tin, use a plastic spatula or something similar to

loosen the loaf. Turn the tin over and shake the loaf out.

Before slicing the bread, allow it to cool off. See Slicing and Storing Bread. If the kneading blade

sticks to the shafts at the bottom of the baking tin, put hot water into the tin for the kneading

blade to loosen. If the kneading blade remains in the bottom of the bread, use the end of a plastic

spoon or other non-metal utensil to remove it. Do not use a knife or any other sharp metal object

as it will scratch the non-stick coating.

Attention: Before slicing the bread, always make sure that the kneading blade is removed from the loaf.

Important: To prevent the blade from sticking to the shaft, put warm water into the tin

immediately after removing the bread.

12. In case of overheating of the unit, the DISPLAY WINDOW will show „E 01“, if the temperature is too

low, „E 00“ will show up. When either of these error messages is displayed, the bread machine will

not function until it has either cooled off or warmed up.

Caution: Do not try to make another loaf until the bread machine has cooled down or warmed up.

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE TIMER

Use the TIMER button to delay the completion of the bread-making process. You can set the machine

to start up to almost 13 hours later.

TO SET THE TIMER, FOLLOW THESE INSTRUCTIONS:

Note: First, follow the steps 1 through to 7 in Using Your Bread Machine. Do not use the TIMER with

recipes that call for perishable ingredients, such as eggs, fresh milk, sour cream or cheese.

1. Determine the time you want to have the bread ﬁnished. For example: It is 7:30 p.m. and you want

the bread to be ﬁnished at 08:00 a.m. next morning. After selecting the correct setting according to

the recipe, keep the TIMER button pressed until 12:30 appears in the display, as the time until the

end of the baking process amounts to 12 hours and 30 minutes.

2. There is no need to calculate the difference between the setting time and the total hours up to the

end of the bread-making process. The machine will automatically adjust to include the setting time.

If you pass the desired time, simply pressꢁ to go back.

3. After setting the desired time, press START. The colon (:) in the display will ﬂash to indicate that

the Timer has been set, and the countdown will begin. The TIMER will count down the remaining

period in one-minute intervals. When the TIMER reaches 0:00, the bread-making process will have

ﬁnished and the beeper will sound.

MAINTENANCE AND CLEANING

Caution: Before you clean the unit, always disconnect the plug from the power supply and allow the

bread machine to cool off. Protect the unit from splashes or any liquid so as to avoid the danger of

causing damage and/or electric shock.

To ensure best performance and maintenance of the bread machine, clean it after each use as follows:

OUTER BODY, LID, BAKING CHAMBER

Wipe the lid and outer body of the unit with a damp cloth or slightly damp sponge. Use a damp

sponge or cloth to wipe out any ﬂour, crumbs or other materials from the baking chamber. Dry the

unit thoroughly.

BAKING TINS AND KNEADING BLADES:

The baking tins and kneading blades have non-stick surfaces. Do not use any hard cleansers, abrasive

materials or utensils that may scratch the surfaces. In course of time, the non-stick surface may

change its appearance due to moisture and steam. This is normal and has no adverse effect on its

use or quality.

Before cleaning the unit, remove the baking tins and kneading blades from the baking chamber. Wipe

the outside of each baking tin with a damp cloth. Never immerse the baking tin into water or other

liquids. Wash the inside of the baking tin with warm, soapy water. If the kneading blade gets stuck, ﬁll

the baking tin with hot water and wait for 30 minutes so that it loosens and can be removed easily.

Never use any of the following to clean your bread machine:

•

Paint thinner

Benzine

Steel wood pads

Polishing powder

Chemical dustcloths

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution: Do not clean any part(s) of the bread machine in a dishwasher!

STORING THE UNIT

Before storing the unit, be sure to dry all parts of it, including the viewing window. Close the lid, and

do not place any items upon the machine.

TROUBLESHOOTING

Speciﬁc questions about the functions of the bread machine as well as problems with ingredients or

recipe are addressed under Questions and Answers / Troubleshooting. To obtain optimal baking results

allow the unit to cool down completely before beginning to bake a second time. You can accelerate the

cooling process by opening the lid and removing the baking tins.

HELPFUL INFORMATION ABOUT INGREDIENTS

IMPORTANT NOTE ON FLOURS

Flours, while similar in appearance, can be very different by virtue of how they were grown, milled,

stored, etc. To obtain the best baking results, you may have to experiment with different types of ﬂour.

The information under Recipe Tips will be helpful to you.

YEAST

Yeast, through a fermentation process, causes bread to rise by releasing carbon dioxide. Three different

types of yeast are available: Fresh, dried and fast-rising yeast. To obtain the best results, use

traditional dried yeast. However, fast-rising yeast can also be used in smaller amounts. Note: The

recipes in this manual were prepared using traditional dried yeast.

Always store yeast in a refrigerator to keep it fresh, as heat will spoil it. Ensure that your yeast is fresh

by checking its expiry date. Once a package or jar of yeast has been opened, it is important that the

remaining contents will be immediately resealed and refrigerated for future use. By the following test

you can ﬁnd out whether or not your yeast is still usable:

1. Place one cup of lukewarm water (43 - 46°C) into a liquid measuring cup.

2. Stir one teaspoon of sugar into the water and then sprinkle two teaspoons of yeast over the surface.

3. Place the cup in a warm environment and leave it there for ten minutes.

4. The mixture should foam and rise to the 1-cup mark. If this does not occur, discard the yeast.

Conversion Chart for Fast-Rising Yeast

1 teaspoon active dried yeast

= 3/4 teaspoons fast-rising yeast

1 1/2 teaspoon active dried yeast = 1 teaspoons fast-rising yeast

2 1/4 teaspoon active dried yeast = 1 1/2 teaspoons fast-rising yeast

3 teaspoon active dried yeast

= 2 teaspoons fast-rising yeast

SUGAR

Sugar has an immense inﬂuence on the colour and ﬂavour of bread. Recipes in this manual calling for

sugar require granulated sugar. Do not used icing sugar unless otherwise indicated. Artiﬁcial sweeteners

cannot be used as a substitute for sugar, as the yeast will not react properly with them.

SALT

Salt is necessary to balance the ﬂavour of breads and cakes as well as for their crust colour. Salt limits

the growth of yeast. Therefore do not exceed the amount of salt speciﬁed in the recipes. For dietary

Download from Www.Somanuals.com. All Manuals Search And Download.

reasons, salt may be left out. However, in this case the bread may rise higher than it normally does.

LIQUIDS

Liquids, such as milk, water, or a combination of powdered milk and water, can be used when making

bread. While milk improves the ﬂavour of the bread, it also gives it a velvety texture and softens its

crust, water alone produces a crispier crust. Some recipes call for juice (orange, apple, etc.) to be

added as a ﬂavour enhancer.

EGGS

Eggs add richness and velvety texture to bread doughs and cakes. Use large-size eggs with these recipes.

FATS: SHORTENING, BUTTER, OIL

Shortening, butter and oil shorten or tenderize the texture of yeast breads. French bread owes its

unique crust and texture to the lack of fat in the ingredients used. However, breads containing fat

stay fresh longer. If butter is used directly from the refrigerator, it should be cut into small pieces for

easier blending during the kneading cycle.

BAKING POWDER

Baking powder is a leavening agent used in quick breads and cakes. This type of leavening agent

does not require a rising time before baking, as the chemical reaction works when liquid ingredients

are added

BAKING SODA

Baking soda is another leavening agent not to be confused with or substituted for baking powder. It

also does not require rising time before baking, as the chemical reaction works during the baking

process.

MEASURING YOUR INGREDIENTS

You ﬁnd enclosed the following measuring instruments that will help you measure the ingredients

easily:

1 measuring cup with the measuring units ml, oz and cup

1 big measuring spoon, equal to 1 tablespoon

1 small measuring spoon, equal to 1 teaspoon

Place the cup on a horizontal ﬂat surface while measuring the ingredients. The ingredients level must

be aligned to the mark of measurement. It is very important to measure each ingredient accurately

when baking with your bread machine. Faulty measurements — even if small— can cause poor baking

results. The ingredients must also be added in the order speciﬁed in each recipe.

When measuring dry ingredients make sure the measuring cup is DRY. When measuring with the

measuring spoons, measurements must be level, not heaped. You can use a knife to level off. Do not

scoop or tap a measuring cup as this will pack the ingredients.

RECIPE TIPS

The recipes included with this manual are tailored especially to this bread machine. To obtain the

best baking results, it is extremely important not no exceed the amounts of ﬂour speciﬁed in each of

the recipes. When trying your own recipes, use the recipes in this manual as a guide for converting

proportions from your recipe to your bread machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL GLAZES FOR YEAST BREADS

Give your freshely-baked bread a professional ﬁnish. After glazing, generously sprinkle with your choice

of poppy, sesame or caraway seeds, if desired. Select one of the following special glazes to enhance

your bread:

EGG GLAZE

Beat 1 large egg and 1 tablespoon of water together, brush generously over dough.

Melted Butter Crust

Brush melted butter over just-baked bread for a softer, tender crust.

MILK GLAZE

For a softer, shiny crust, brush just-baked bread with milk or cream.

SWEET ICING GLAZE

Mix 1 cup sieved icing sugar with 1 to 2 tablespoons of milk to make a consistent glaze. Drizzle over

Raisin Bread or sweet Breads when almost cool.

USING BREAD MIXES

You can use prepackaged bread mixes in your bread machine. Follow the package directions. Do not

exceed the capacity of the baking tin.

CHECKING DOUGH CONSISTENCY

Although the bread machine will mix, knead and bake bread, it is absolutely necessary that you learn to

recognize the condition of your dough. Open the machine after ﬁve minutes into the KNEAD stage. The

dough should take the shape of a soft, sticky ball. If it is too dry, add liquid 1/2 to 1 tablespoons at a

time. If it is too wet, add 1 tablespoon ﬂour at a time.

HIGH-ALTITUDE BAKING

In high-altitude areas, dough tends to rise faster as there is less air pressure. Therefore less yeast is

necessary. In dry climates, ﬂour is drier and requires slightly more liquid. In humid climates, ﬂour is

wetter and will absorb less liquid. Therefore slightly more ﬂour is required.

SLICING AND STORING BREAD

To obtain the best results, place bread on a wire rack and allow it to cool down 15 to 30 minutes before

slicing. Use an electric knife or a serrated knife for even slices.

Store unused bread tightly covered (re-closable plastic bags or plastic containers work well) at room

temperature for up to three days. For longer storage (up to one month), place the bread in a tightly

covered container in the freezer. Since home-made bread has no preservatives, it tends to dry out and

become stale faster then commercially-made bread.

Leftover slightly hardened bread may be cut into 1/2-inch or -1-inch cubes and used in recipes to make

croutons, bread pudding or stufﬁng.

CAKE MAKING

When using your own cake recipes, always pay attention to the volume of the baking tins.

Download from Www.Somanuals.com. All Manuals Search And Download.

BREAD MACHINE CYCLE TIMES

NORMAL CYCLE SETTINGS AND TIMES

BASIC

FRENCH FRENCH FRENCH WHEAT WHEAT SWEET

BASIC

WHEAT SWEET FRENCH FRENCH SWEET WHEAT WHEAT SWEET SWEET

Delay

time

2:10-

12:50

2:35-

12:55

2:25-

12:55

2:50