Kodak Scan Station 100 Pre-installation Worksheet
It is recommended that you fill out this worksheet before installing the Kodak Scan Station 100. You will
need this information about your network to create an administrative configuration for your Scan Station
using the Configuration Organizer (provided with the Scan Station) and to complete the installation.
Research any information you are unsure of before creating the administrative configuration file. If you
have trouble filling out this worksheet, see the person who manages your network.
NOTE: This installation shows what you will need to install the Scan Station as of the date of this
document. As we improve our products from time to time, check the Kodak website
Language Settings — found under the Settings button in the Configuration Organizer or
Administration GUI.
Parameter Name
Language
Description/Sample
Your Setting
Notes
Name of GUI/OCR language
Default: English.
Device Settings — found under the Settings button in the Configuration Organizer or
Administration GUI.
Parameter Name
Device Name
Description/Sample
Your Setting
Notes
NETBIOS name of the Scan
Station. The default is the Scan
Station’s unique serial number
(e.g., KSSXXXX-XXXX, where
X=the serial number)
It is recommended that you do not
change this setting. Must be unique
(up to 15 characters) on the network/
subnet. You can leave this field
unchanged as ”Scan-Station” to
avoid overwriting an existing device
name. See Chapter 5, Scan Station
Administration Specifics for more
information.
IP Address Settings — Automatic
Automatic (DHCP)
This is the default.
If selected, the IP address, subnet
mask, and DNS server of the Scan
Station are set automatically by the
DHCP server.
IP Address Settings — Static
Static (IPv4)
Standard IPv4 address
(e.g., 192.0.0.1)
Scan Station’s IP address
Complete this and the other
network sections only if you are
not using DHCP.
• IP Address
• Subnet Mask
Scan Station’s Subnet Mask (e.g.,
255.255.255.0)
Only these numbers are allowed: 0,
128, 192, 224, 248, 252, 254 and 255.
• Default Gateway
IP of default gateway on the
network
• Preferred DNS
Server
IP of domain name Server #1
If this number is incorrect, you may
not be able to reach some network
locations.
• Alternate DNS
Server
IP of the alternate domain name
Server #2
• Preferred WINS
Server
IP of Windows Internet Name
Server #1
January 2008
A-61583
Download from Www.Somanuals.com. All Manuals Search And Download.
Email Server Settings — found under the Settings button in the Configuration Organizer or
Administration GUI.
Parameter Name
SMTP Settings
Description/Sample
Your Setting
Notes
Fully qualified domain name or
IPv4 address of the SMTP server
(e.g., smtp-server.
Use IPv4 to eliminate any DNS issues
when troubleshooting.
• Server Address
company.com or 192.0.0.1).
User name, password and network
domain. Required to access the
SMTP server.
Required for authenticated SMTP.
NOTE: This is not necessarily the
same as the credentials defined
under Device Settings.
• Credentials
Default: 25
Only change if your email server
communicates on an IP port that is
not Port 25.
• Port
• SSL
Secure Socket Layer
Typically unchecked. Check only if
you are sure your email server
requires it.
LDAP Settings
Fully qualified domain name or
IPv4 address of the LDAP server
(e.g., ldap-server.
Use IPv4 to eliminate any DNS issues
when troubleshooting.
• Server Address
company.com or 192.0.0.1).
User name, password and network
domain. Required to access the
LDAP server.
Required for authenticated LDAP.
NOTE: This is not necessarily the
same as the credentials defined
under Device Settings.
• Credentials
Default: 389
Only change if your LDAP server
communicates on an IP port that is
not Port 389.
• Port
Base Distinguished Name
Default: cn
Contact your corporate LAN
administrator for more details on this
setting.
• Base DN
Contact your corporate LAN
administrator for more details on this
setting.
• Common Name
Tag
Default: email
Contact your corporate LAN
administrator for more details on this
setting.
• Email Address
Tag
Return Email
Address
This is the address that bounced
emails are returned to (e.g.,
[email protected]). This
address will also appear as the
“From” address when sending
email.
Select a person who will receive
notification that an email address
could not be reached.
Maximum
Attachment Size
1-99 MB
Default: 10 MB
Email operations that create files
larger than this will fail. This should
match the limitations defined by
your email server.
Custom Email
Addresses
Enables/disables the custom Email
address option, allowing the entry
of email addresses that do not
appear in your address book.
Typically enabled; may be disabled in
more secure environments.
January 2008
A-61583
Download from Www.Somanuals.com. All Manuals Search And Download.
A-61583
January 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
|