February 2003 • E-2411
TECHNICAL DATA / COLOR PAPER
KODAK EKTACHROME
RADIANCE III HC Copy Paper
SIZES AVAILABLE
Sizes and catalog numbers may differ from country to
country. See your dealer who supplies KODAK
PROFESSIONAL Products. The following sizes are
available in the U.S. and Canada.
—NOTICE—
Discontinuance of
KODAK PROFESSIONAL EKTACHROME
RADIANCE III Papers and Materials and
KODAK EKTACHROME R-3 Chemicals
Alternative options for image capture and output have
gradually eliminated the need for PROFESSIONAL
EKTACHROME RADIANCE III Papers and Materials as well
as chemicals for Process R-3. Therefore, dependent on
individual country and market requirements, Kodak will
discontinue these products as inventories are exhausted
Sheets
Size
in. x in. /
cm x cm
Sheets Per
Surface
CAT No.
Package
100
50
8.5 x 11 /
21.6 x 27.9
N
F
508 6673
508 6756
508 6699
508 6707
508 6715
508 6657
Technology has made the option of scanning, manipulating,
and outputting images directly to traditional color paper very
popular, and photographers are increasingly using color
negative film and digital cameras for image capture. Producing
positive prints, even from transparencies, for image display no
longer requires the use of RADIANCE Papers and Materials.
11 x 14 /
27.9 x 35.6
11 x 14 /
27.9 x 35.6
50
N
N
F
16 x 20 /
40.6 x 50.8
50
Information on Kodak Professional Modular Digital Workflow
Products (Equipment and Software) is available at
20 x 24 /
50.8 x 61
50
Thank you for using KODAK PROFESSIONAL Products.
20 x 24 /
50.8 x 61
50
N
Use this resin-coated color reversal paper to make direct
color copies when you need high-contrast reproduction of
line-copy originals such as drawings, maps, documents,
blueprints, and layouts. EKTACHROME RADIANCE III
HC Copy Paper has higher contrast and D-max than
KODAK EKTACHROME RADIANCE III Copy Paper.
The “HC” stands for high contrast.
This paper is available in both rolls and sheets with F
(glossy) and N (semi-matt) surfaces. You can process it with
KODAK EKTACHROME R-3 Chemicals.
Rolls
Rolls
in. x ft /
cm x m
Spec No.
Surface
CAT No.
11 x 200 /
27.9 x 61
193
193
193
193
223
223
223
223
223
224
224
F
N
N
F
508 6897
508 6830
508 6764
508 6848
508 6822
508 6855
521 1461
508 7036
508 6814
508 6871
508 6806
11 x 200 /
27.9 x 61
11.7 x 200 /
29.7 x 61
FEATURES
BENEFITS
11.7 x 200 /
29.7 x 61
• Improved color reproduction • More accurate colors
• Extremely low minimum
density
• Cleaner, whiter whites
20 x 200 /
50.8 x 61
N
F
• Elimination of thermal
yellowing
• Longer print life under
dark-storage conditions
24 x 200 /
61 x 61
30 x 100 /
76.2 x 30.5
N
F
50 x 100 /
127 x 30.5
50 x 100 /
127 x 30.5
N
F
50 x 100 /
127 x 30.5
50 x 100 /
127 x 30.5
N
©Eastman Kodak Company, 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
PROCESSING
VIEWING
Use KODAK EKTACHROME R-3 or R-3 LU Chemicals to
process this paper in continuous or roller-transport
processors. For specific processing instructions, see
KODAK Publication No. Z-129B, Using KODAK
EKTACHROME R-3 Chemicals in Continuous and
Roller-Transport Processors, available on our website at
Evaluate prints under light of the same color and brightness
that you will use to view the final prints. A good average
viewing condition is a light source with a color temperature
of 4000 ±1000 K, a Color Rendering Index (CRI) of 85 to
100, and an illuminance of a least 538 lux (50 footcandles).
Fluorescent lamps such as the cool white deluxe fluorescent
lamp (made by several manufacturers) meet these
conditions. You can also use a mixture of incandescent and
fluorescent lamps. For each pair of 40-watt cool white deluxe
fluorescent lamps, use a 75-watt frosted tungsen bulb.
DRYING
Do not ferrotype this paper.
Remove excess water from the surface of the paper before
drying. Dry the prints using dust-free air. The temperature of
the air will depend on the design of the dryer, the air-flow
rate, and the total drying time. The ideal drying temperature
is between 50 and 70°C (122 and 158°F). If the temperature
is too high, the paper may curl. If the temperature is too low,
the surface gloss of the paper is reduced, and the risk of the
paper sticking is increased.
MOUNTING
From: cpotter@node1 (Chris Potter)
You can mount prints with KODAK Dry Mounting Tissue,
To: dpenazek@caps
Type 2. The temperature across the heating platen of the
mounting press should be between 82 and 99°C (180 and
210°F). Temperatures above 110°C (230°F) or high pressure
may cause physical and color changes in prints. Preheat the
cover sheet that you use over the face of the print to remove
moisture. Apply pressure for 30 seconds or longer for a thick
mount.
From cpotter@node1 Thu Dec 12 17:18:27 1996
Date: Thu, 12 Dec 96 17:21:57 EST
Subject: Illustration Update
inns:
any
DISPLAYING
Photographic dyes, like all dyes, can change with time and
exposure to sunlight, ultraviolet radiation, excessive heat,
and high humidity. To help prevent changes in photographic
dyes, follow these guidelines:
• Illuminate prints with tungsten light whenever possible.
• Display prints in the lowest light level consistent with
your viewing needs.
• If a print is exposed to direct or indirect sunlight or
fluorescent light, use an ultraviolet-absorbing filter
between the light source and the print.
• Keep the temperature and humidity as low as possible.
KODAK EKTACHROME RADIANCE III HC Copy Paper • E-2411
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CURVES
Spectral-Dye-Density Curves
Characteristic Curves
2.5
2.0
4.0
1/2 second
Process: R-3
Densitometry: Status A, Reflection
Exposure:
Process: R-3
3.0
2.0
1.0
1.5
1.0
B
G
Yellow
Cyan
R
Magenta
0.5
0.0
0.0
400
F002_0779AC
500
600
700
0.0
F002_0777AC
1.0
2.0
3.0
4.0
WAVELENGTH (nm)
LOG EXPOSURE (lux-seconds)
Spectral-Sensitivity Curves
2.0
1.0
0.0
1.0
2.0
Magenta-
Forming
Layer
Yellow-
Forming
Layer
Cyan-
Forming
Layer
250 300 350 400 450 500 550 600 650 700 750
WAVELENGTH (nm)
*Sensitivity = reciprocal of exposure (erg/cm2 ) required
to produce specified density
F002_0778AC
NOTICE: The sensitometric curves and data in this publication represent product tested
under the conditions of exposure and processing specified. They are representative of
production coatings, and therefore do not apply directly to a particular box or roll of
photographic material. They do not represent standards or specifications that must be met
by Eastman Kodak Company. The company reserves the right to change and improve
product characteristics at any time.
4
KODAK EKTACHROME RADIANCE III HC Copy Paper • E-2411
Download from Www.Somanuals.com. All Manuals Search And Download.
MORE INFORMATION
Kodak has many publications to assist you with information
on Kodak products, equipment, and materials.
The following publications are available from dealers who
sell Kodak products, or you can contact Kodak in your
country for more information.
For the latest version of technical support publications for
KODAK PROFESSIONAL Products, visit Kodak on-line at:
If you have questions about KODAK PROFESSIONAL
Products, call Kodak.
In the U.S.A.:
E-30
Storage and Care of KODAK Photographic
Materials—Before and After Processing
1-800-242-2424, Ext. 19, Monday–Friday
9 a.m.–7 p.m. (Eastern time)
In Canada:
E-1766
E-1767
KODAK EKTACHROME RADIANCE III Paper
KODAK EKTACHROME RADIANCE III SELECT
Material
1-800-465-6325, Monday–Friday
8 a.m.–5 p.m. (Eastern time)
E-67
E-70
Finishing Prints on KODAK Water-Resistant Papers
Retouching Prints on KODAK EKTACOLOR and
EKTACHROME Papers
Note: The Kodak materials described in this publication for
use with KODAK EKTACHROME RADIANCE III HC Copy
Paper are available from dealers who supply KODAK
PROFESSIONAL Products. You can use other materials, but
you may not obtain similar results.
E-2410
KODAK EKTACHROME RADIANCE III Copy Paper
E-2412A KODAK EKTACHROME RADIANCE III Overhead
Material
E-2412B KODAK EKTACHROME RADIANCE III Clear
Display Material
E-2413
Z-129
KODAK EKTACHROME RADIANCE III Translucent
Display Material
Using KODAK EKTACHROME R-3 Chemicals,
Sixth Edition
Z-129A
Z-129B
Z-129C
Z-129E
KODAK EKTACHROME R-3 and R-3000
Chemicals
Using KODAK EKTACHROME R-3 Chemicals in
Continuous and Roller-Transport Processors
Using KODAK EKTACHROME R-3000 and
R-3 Chemicals in Batch-Type Processors
Monitoring and Troubleshooting Processes Using
KODAK EKTACHROME R-3 and R-3000
Chemicals
Z-129G
Z-129H
Recovering Silver from Processes Using KODAK
EKTACHROME R-3 Chemicals
Using KODAK EKTACHROME R-3 LU Chemicals
in Roller-Transport Processors
KODAK EKTACHROME RADIANCE III HC Copy Paper • E-2411
5
Download from Www.Somanuals.com. All Manuals Search And Download.
KODAK EKTACHROME RADIANCE III HC Copy Paper
KODAK EKTACHROME
RADIANCE III HC Copy Paper
KODAK Publication No. E-2411
Kodak, Kodak Professional, Ektachrome, Ektacolor,
Radiance, and Wratten are trademarks
Minor Revision 2-03
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|