Kodak EasyShare CX4310
digital camera
User’s Guide
Visit Kodak on the World Wide Web at www.kodak.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Camera Front
1
2
4
5
6
7a
3
7b
1
2
3
4
Shutter button
Flash unit
5
6
Viewfinder lens
Lens
On / Off switch
Self Timer light
7a USB connector
7b DC in connector
Camera Bottom
1
2
3
1
Camera Dock connector
(door shown closed)
2
3
Tripod mount socket
Battery door
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Camera Back
1
3
4
2
5
6
7
8
9
10
11
12
13
1 Viewfinder
2 Ready light
8 SD/MMC card door
9 Flash button
3 LCD (Liquid Crystal Display)
4 Shutter button
10 Share button
11 Delete button
5 4-way arrow / Zoom / OK buttons 12 Review button
6 Wrist strap post
7 Video out port
13 Menu button
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Need This Guide in Large Print? .............................................1
Camera Package Contents .....................................................2
Attaching the Lens Cap.......................................................... 3
Loading the Batteries ............................................................. 4
Turning the Camera On and Off............................................ 5
Using the 4-Way Arrow/Zoom/OK Button......................... 5
Selecting a Language...............................................................6
Setting the Clock.......................................................................7
Checking Camera Status........................................................ 8
Inserting an SD/MMC Card.................................................... 9
Choosing Internal Memory or SD/MMC Card...................10
Camera Modes........................................................................... 11
Important Battery Information........................................... 12
2 Taking Pictures—Capture Mode .................................15
Take a Picture Anytime..........................................................15
Taking a Picture........................................................................15
Liveview—Using the LCD to Frame Your Subject ..........16
Quickview—Reviewing the Picture Just Taken ................ 17
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Picture-Taking Options.......................................20
To Enter Review Mode............................................................ 27
To Access the Review Menus ..............................................28
Viewing Single Pictures..........................................................29
Deleting Pictures ....................................................................30
Magnifying Pictures ...............................................................30
Protecting Pictures From Deletion ....................................31
Running a Slide Show..............................................................31
Displaying Pictures on a Television....................................33
Copying Pictures .....................................................................34
Viewing Picture Information.................................................35
4 Tagging Pictures—Share Mode ..................................37
When Can I Tag My Pictures? .............................................. 37
To Access Share Mode/Menus........................................... 37
Tagging Pictures for Printing..............................................38
Tagging Pictures for Emailing .............................................39
Tagging Pictures as Favorites............................................40
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
To Access Setup Mode/Menus ............................................41
Returning to the Previous Menu ........................................ 42
Changing the Print Quantity Default ............................... 42
Turning On Liveview................................................................. 43
Setting Video Out................................................................... 44
Formatting Memory or MMC/SD Card ............................ 45
6 Installing the Software .................................................47
System Requirements ...........................................................47
Install the Software ..............................................................49
7 Connecting to the Computer ........................................ 51
Important—Before You Connect ........................................51
Connecting to the Computer.................................................51
Transferring Pictures to Your Computer........................ 52
Printing Pictures from Your Computer............................ 52
Printing from an SD/MMC Card......................................... 52
Print With or Without a Computer .................................... 52
8 Using the Optional Camera Dock II ...........................53
Camera Dock Package Contents ....................................... 53
Installing the Camera Insert............................................... 54
Connecting the Camera Dock.............................................. 55
Installing the Battery Pack in the Camera.....................56
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Pictures ............................................................59
Caution When Using a Tripod...............................................59
Earlier Camera Dock Model................................................. 60
Helpful Web Links......................................................................77
Help in this User Guide .........................................................78
Software Help ..........................................................................78
Telephone Customer Support..............................................78
11 Appendix .............................................................................81
Camera Specifications...........................................................81
Original Factory Settings—Camera.................................83
Upgrading Your Software and Firmware..........................83
Tips, Safety, Maintenance ...................................................84
Picture Storage Capacities.................................................85
Locating Pictures on an MMC/SD Card...........................85
Card File Naming Conventions ........................................... 86
Battery-Saving Features.....................................................87
Optional AC Adapter .............................................................87
Camera Dock II Specifications........................................... 88
FCC Compliance and Advisory............................................ 89
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Getting Started
Install the Software First
You must install the Kodak EasyShare software on your computer before you
connect the camera to the computer or attempt to transfer pictures.
See Chapter 6, Installing the Software, or the Quick Start Guide for directions.
Need This Guide in Large Print?
For a large print version of this User’s Guide:
1
2
Navigate to the Manuals section.
3 Click View as PDF to open the User’s Guide.
4 On a Windows OS-based computer or Mac OS 8.6 or 9.x:
! From the File menu, select Print.
! In the Print window, select Fit to Page.
On Mac OS X:
! From the File menu, select Page Setup.
! Change Scale to 200%.
5 Print as usual.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Camera Package Contents
Contents subject to change. Check box for contents listing.
1
3
4
2
5
6
USB cable
Video cable (for viewing
pictures on television)
1
2
3
4
Camera
Wrist strap
Lens cap
Custom camera insert*
5
6
Also included but not shown: 2 Kodak digital camera batteries; User’s Guide or
User’s Guide CD; Quick Start Guide; and Kodak EasyShare software CD.
NOTE: *The custom camera insert fits your camera to the optional Kodak
EasyShare camera dock, camera dock II, or EasyShare printer dock
4000. DO NOT DISCARD.
See page 53 for details about purchasing and using a camera dock.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Attaching the Wrist Strap
1
Thread the short loop of the strap through
the wrist strap post.
2
Thread the long end of the strap through the
short loop. Pull until secure.
Attaching the Lens Cap
1
Thread the lens cap string through the loop
in the wrist strap as shown.
2
Put the lens cap on the lens. Depress the
tabs on the lens cap, fit the cap on the lens,
and release the tabs.
To protect the lens, put the lens cap on
whenever you are not taking pictures.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Loading the Batteries
Kodak digital camera batteries (2, AA) are included with your camera.
1
2
Turn off the camera.
On the bottom of the camera, slide the
battery door and lift to open.
3 Insert the AA batteries as shown.
4 Close the battery door.
AA
IMPORTANT BATTERY INFORMATION
For acceptable battery life and to make
sure your camera operates
dependably, do not use alkaline
batteries.
If you purchased an optional Kodak CRV3
lithium battery, insert it as shown.
CRV3
(optional)
If you purchased a Kodak EasyShare camera
dock II, see page 56 for details on using the
Kodak EasyShare Ni-MH rechargeable
battery pack.
See page 12 for the types of batteries you
can use in your camera.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Turning the Camera On and Off
1
Slide the On/Off switch to the On position.
The ready light blinks green while the
camera performs a self-check, then glows
steady green when the camera is ready to
take pictures.
2
To turn off the camera, slide the On/Off
switch to the Off position.
The camera completes operations that are
in process.
Using the 4-Way Arrow/Zoom/OK Button
OK
View pictures—press
to scroll through your pictures. Press
to
display multiple thumbnails. See page 29.
Zoom—press
Check status—press
Navigate menus—press
fields.
to zoom in or out when taking pictures. See page 19.
to display the status bar. See page 8.
and to scroll through the menus and
Select—press OK to make a selection.
Magnify—press OK to magnify a picture in Review mode. See page 30.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Selecting a Language
You can display menus and screen messages in different languages.
The Language screen is automatically displayed the first time you turn on the
camera. If this is the first time the camera has been turned on, go to step 4.
To change the language after that:
1
2
In Capture or Review mode, press the Menu button.
Highlight Setup
, then press the OK button.
3 Highlight Language
, then press the OK
button.
4 Press
to highlight a language, then
press the OK button.
5 Press the Menu button to turn off the menu.
Text is displayed in the selected language.
This setting remains until you change it.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Setting the Clock
The Date & Time screen appears the first time you turn on the camera or if the
battery is removed for an extended time. If this is the first time the camera has
been turned on, go to step 4.
To set the date and time after that:
1
In Capture or Review mode, press the Menu
button.
OK
2
Highlight Setup
button.
, then press the OK
3 Highlight Date & Time
, then press the
OK button.
The date format is YYYY/MM/DD in a 24-
hour format.
4 Press
to move through the fields.
to adjust the settings.
Press
Menu
5 Press the OK button to accept the changes.
6 Press the Menu button to turn off the menu.
The setting remains until you change it.
NOTE: Depending on your computer operating system, Kodak EasyShare
software may allow your computer to automatically update the camera
clock when you connect the camera. See the Kodak EasyShare software
Help for details.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Checking Camera Status
To check the current camera settings, press the down arrow in Capture mode
or the flash button any time:
or
Camera Status Icons
Date stamp
Pictures remaining
Storage location
072
Close up
Internal
Card
Auto
Off
Flash mode
Camera mode
(icons not displayed
in Liveview)
Capture
Review
Fill
Red-eye
Share
Quality
Low Battery
Best
Exhausted battery
(blinking)*
Better
Good
Self Timer
Digital Zoom
Battery Status
If no battery icon appears on the LCD, the battery is fully charged.
*A blinking battery icon means the battery is too weak to power the camera.
The ready light blinks red for five seconds, then the camera turns off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Inserting an SD/MMC Card
Optional SD/MMC cards provide removable, reusable storage for pictures.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; it may damage your pictures, card, or camera.
1
Turn off the camera.
Open the card door.
2
3 Orient the card as shown.
4 Push the card into the slot to seat the
connector. (To remove the card, push it in,
then release it. When the card is partially
ejected, pull it out.)
Notched
corner
5 Close the door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Choosing Internal Memory or SD/MMC
Card
The camera offers two options for storing pictures:
Internal Memory—store up to 14 pictures (at Best quality) in the 16 MB
internal memory.
SD/MMC Card—store as many pictures as you like, depending on the size of
the card.
Changing Your Storage Location Setting
Use the Image Storage menu, available in Capture and Review modes, to
change the setting.
1
Turn on the camera.
Press the Menu button.
2
3 Select Image Storage
, then press the OK button.
4 Press to highlight an option, then
press the OK button:
Auto (default)—the camera uses the
card if one is in the camera ; the
camera uses internal memory if no card is
in the camera
.
Internal Memory—the camera always
uses internal memory, even if a card is
installed
.
5 Highlight Continue, then press the OK button again.
The camera changes storage locations. The setting remains until you
change it and applies to all camera functions (Capture, Review).
6 Press the Menu button to turn off the menu.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Camera Modes
The camera has four modes: Capture, Review, Share, and Setup. You can
always tell which mode the camera is in:
Capture
—the LCD is blank, no image
Capture
is displayed. Press the down arrow to
display the status bar and mode icon. Press
OK to enter Liveview. See Chapter 2, Taking
Pictures—Capture Mode. But remember,
you can press the Shutter button and take a
picture anytime, no matter what mode the
camera is in!
Review
—a picture is displayed; the
Review
Share
mode icon is displayed on the LCD. See
Chapter 3, Reviewing Pictures—Review
Mode.
Share—Print, Email, and Favorites appear
in the menu bar; a picture is displayed. See
Chapter 4, Tagging Pictures—Share Mode.
Setup—Setup mode is an option on both
the Capture and Review menus. The menu
bar is bright yellow; a picture is never
displayed. See Chapter 5, Customizing
Camera Settings—Setup Mode.
Setup
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Important Battery Information
Choose the replacement battery that fits your needs—and get the best
performance.
Battery Replacement Types/Battery Life
Your camera can use the following types of Kodak batteries. Actual battery life
may vary based on usage.
CRV3 lithium battery
365 - 455
AA (2) lithium batteries
265 - 365
Ni-MH rechargeable
battery pack* (per charge)
165 - 205
165 - 205
AA (2) Ni-MH rechargeable
batteries (per charge)
Kodak digital
camera batteries, AA (2)
100 - 140
(included with camera)
0
500
Battery Life (Approx. Number of Pictures)
* Included with the Kodak EasyShare camera dock, camera dock II,
and printer dock 4000
We do not recommend or support alkaline batteries. For acceptable
battery life, and to make sure your camera operates dependably, use the
replacement batteries listed above.
For information on batteries, visit http://www.kodak.com/global/en/service/
batteries/batteryUsage.jhtml
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Extending Battery Life
! Battery life depends significantly on battery age, usage conditions, and type.
Digital cameras are demanding on batteries. Not all batteries perform well
under these challenging conditions.
! Limit the following activities that quickly deplete battery power:
–
–
–
–
Reviewing your pictures on the camera screen (see page 27)
Using Liveview (see page 16)
Using Quickview (see page 17).
Excessive use of the flash
! Purchase an optional Kodak 3-volt AC adapter to power your camera (see
page 87).
! Purchase an optional Kodak EasyShare camera dock (see page 53). The
camera dock powers your camera, transfers pictures, and is also a battery
charger for its included Kodak EasyShare Ni-MH rechargeable battery
pack.
! Purchase an optional Kodak EasyShare printer dock 4000 (see page 52).
The printer dock 4000 powers your camera, makes 4 x 6 prints with or
without a computer, transfers pictures, and is also a battery charger for its
included Kodak EasyShare Ni-MH rechargeable battery pack.
! Dirt on the battery contacts can affect battery life. Wipe the contacts with a
clean, dry cloth before loading batteries in the camera.
! Battery performance is reduced at temperatures below 41° F (5° C).
Carry spare batteries when using your camera in cold weather, and keep
them warm. Do not discard cold batteries that do not work; when they
return to room temperature, they may be usable.
Battery Safety and Handling
! Do not allow batteries to touch metal objects, including coins. Otherwise, a
battery may short circuit, discharge energy, become hot, or leak.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Taking Pictures—Capture
Mode
Take a Picture Anytime
The camera is in Capture mode
when you turn it on. Press the Shutter
button to take a picture. But remember, you can press the Shutter button and
take a picture anytime, no matter what mode the camera is in!
Taking a Picture
Before you take a picture, make sure your picture storage location is set the
way you want it (see page 10).
1
Use the Viewfinder to frame your subject.
(Or press the OK button to turn on Liveview.
See page 16.)
Shutter
Viewfinder
2
Press the Shutter button half-way down to
set the exposure and focus.
3 Press the Shutter button completely down to
take the picture.
Ready light
The ready light blinks green while the picture is saved. The ready light
blinks orange if the flash is recharging or if there is an auto-exposure
error.
CAUTION:
Do not insert or remove a card when the green ready light
is blinking. It may damage your pictures, card, or camera.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Liveview—Using the LCD to Frame Your
Subject
When you turn on Liveview, the LCD displays a live image of what the lens sees.
Look at the LCD to frame your picture.
1
Make sure the camera is in Capture mode
on the LCD).
Press the OK button to turn on Liveview.
(
2
3 Frame your picture in the LCD.
4 Take the picture.
5 To turn off Liveview, press the OK button.
OK
NOTE: Liveview quickly depletes battery power;
use it sparingly. To conserve battery
power, Liveview automatically turns off
after one minute.
To change the Liveview setting so it is on whenever the camera is on, see
page 43.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Quickview—Reviewing the Picture Just
Taken
After you take a picture, the LCD displays a Quickview of that picture for 5
seconds. While the picture is displayed, you can:
! Review It. If you take no action, the picture
Delete
is saved.
! Delete it. Press the Delete button while the
picture and
are displayed.
NOTE: To save battery power, you can turn off the Quickview feature. See
page 43.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using the Flash
Use the flash when you take pictures outdoors in heavy shadows, at night, or
indoors. Flash is effective at the distances of 1.6 to 9.8 feet (0.5 to 3 m).
Press the button repeatedly to scroll
through the flash options.
The flash icon displayed on the LCD is the
active option.
Current camera status icons are also
displayed (see page 8). The LCD screen
turns off after 3 seconds.
Auto Flash—flash fires when the lighting conditions require it.
When the picture is taken, the camera flashes twice, once to set
the exposure and once to take the picture.
Flash Off—flash never fires.
Fill Flash—flash fires every time you take a picture, regardless
of the lighting conditions. When the picture is taken, the camera
flashes twice, once to set the exposure and once to take the
picture.
Red-eye—flash fires three times, once to set the exposure, once
to reduce red-eye, and once to take the picture. The Red-eye
option remains in effect until you change it. See page 21 for an
exception with Close-up.
NOTE: All flash options (except Red-eye) revert to Auto when the camera is
turned off.
The camera uses slow shutter speeds in low-light conditions with the
flash turned off. Take care to avoid camera shake; use a tripod or place
the camera on a steady surface.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using Digital Zoom
Use Digital Zoom to zoom in two times closer to your subject. The lens does
not move during Digital Zoom.
IMPORTANT: You may notice a decrease in printed image quality
when using Digital Zoom.
1
2
Press the OK button to turn on Liveview.
Press to activate the digital zoom.
The LCD displays the zoomed image and
the digital zoom icon
.
3 Use the LCD to frame your subject, then take
the picture. You must use Liveview to take
the picture because the zoomed image is
only displayed through the LCD and not the
viewfinder.
NOTE: Digital zoom is turned off when you press the OK button, turn off the
camera, turn Close-up on or off, or when the camera enters Auto
power-off.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Changing Picture-Taking Options
Use the Capture menus to change picture-taking options. If you are in Review,
Share, or Setup modes you must return to Capture mode before you can access
the Capture menus.
To Return to Capture From Another Mode
To return to Capture from:
! Any mode, press the Shutter button to take a picture and revert to Capture.
! Review mode, press the Review button.
! Share mode, press the Share button.
! Setup mode, and you got there from Capture, press the Menu button.
! Setup mode, and you got there from Review mode, press the Menu button.
To Access the Capture Menu
1
In Capture mode (LCD is blank, no picture is displayed), press the Menu
button.
2
Press the Menu button to turn off the menu.
Capture Menus
Close-up (page 21)
Quality (page 24)
Self Timer (page 22)
Date Stamp (page 25)
Orientation Sensor (page 26)
Setup (page 41)
Image Storage (page 10)
Exposure Compensation
(page 23)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Taking Close-up Pictures
The Close-up setting helps you gain sharpness and detail at close range. The
Close-Up focus distance is 5.9 to 19.7 in. (150 to 500 mm).
To turn on Close-up:
1
2
In Capture mode, press the Menu button.
Highlight Close-up , then press the OK
button.
3 Highlight On, then press the OK button.
4 Press the Menu button to turn off the menu
screen.
The Close-up icon
appears in the
status bar and the LCD automatically
enters Liveview.
5 Use the LCD to frame your subject and take
the picture as usual.
The Close-up setting turns off when you turn off the camera.
NOTE: If the flash is set to Red-eye when you turn on Close-up, the flash setting
changes to Auto; the flash then changes back to Red-eye when you turn
off Close-up.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Putting Yourself in the Picture
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time the picture is taken.
1
2
In Capture mode, press the Menu button.
Highlight Self Timer
button.
, then press the OK
3 Highlight On, then press the OK button.
4 Press the Menu button to turn off the menu
screen.
5 Place the camera on a flat surface or use a
Press Shutter
Self Timer light
tripod.
6 Press the Shutter button.
The red Self Timer light turns on for 8
seconds, then blinks for 2 seconds. The
picture is taken.
The Self Timer turns off after you take the
picture.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light is allowed into the
camera. The exposure range is +2 to -2 in 1/2-step increments.
NOTE: This setting is ideal for controlling pictures in which the light source is
behind the subject (backlit), or for correcting pictures that are too light
or too dark.
1
2
In Capture mode, press the Menu button.
Highlight Exposure Compensation , then press the OK button.
3 Press
to select the
Exposure Compensation setting.
! If your pictures are too light,
press
value.
to decrease (-) the
! If your pictures are too dark,
press to increase (+) the
value.
4 Press the OK button to accept the
change and return to the menu
screen.
5 Press Menu to exit the menu
screen.
This setting remains until you
change it.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Setting Picture Quality
Use the Quality setting to select a picture resolution:
1
2
In Capture mode, press the Menu button.
Highlight Quality
, then press the OK button.
The active Quality setting appears in the top left corner.
3 Highlight an option:
Best
—(3.2 MP, low
compression) for printing up to
11 x 14 in. (27.9 x 35.6 cm);
produces highest picture
resolution, more detail, and
largest file sizes.
appears in the status
bar.
Better
—(3.2 MP, high
compression) for printing up to 8
x 10 in. (20.3 x 25.4 cm);
pictures are medium resolution
with smaller file sizes.
appears in the status
bar.
Good
— (0.8 MP) for
emailing or screen display;
pictures are lowest resolution
with smallest file sizes.
appears in the status bar.
4 Press the OK button.
5 Press the Menu button to turn off the menu screen.
This setting remains until you change it.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Placing the Date on Pictures
Use Date Stamp to imprint the date on your pictures.
1
Make sure the camera clock is set to the correct date (page 7).
In Capture mode, press the Menu button.
2
3 Highlight Date Stamp
, then press the OK button.
4 Highlight an option:
Off
YYYY MM DD
MM DD YY
DD MM YYYY
5 Press the OK button.
6 Press the Menu button to turn off
the menu.
The current date is printed in
the bottom right corner of new
pictures. This setting remains
until you change it.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Setting the Orientation Sensor
If you rotate the camera to take a picture (for example, a portrait shot), the
Orientation Sensor rotates the picture so it is displayed correct side up during
Quickview and Review.
The Orientation Sensor is turned on as the default. You can turn it off so that
pictures are displayed in their original orientation.
NOTE: When your subject is above or below you (such as pictures of an object
in the sky, on the ground, or when pointing down at small objects on a
table), turn off the Orientation Sensor so that pictures are not rotated
unnecessarily.
1
2
In Capture mode, press the Menu button.
Highlight Orientation , then press the OK button.
3 Highlight On or Off, then press the OK button.
4 Press the Menu button to turn off the menu.
This setting remains until you change it.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Reviewing Pictures—Review
Mode
Use Review mode
to view and work with the pictures that are stored in
internal memory or on a card.
NOTE: Reviewing pictures on the LCD quickly depletes battery power. An
optional AC adapter is available (see page 87).
To Enter Review Mode
1
Press the Review button.
The last picture you took or reviewed is
displayed. The Review icon
the bottom of the LCD.
appears at
2
Press the Review button again to exit Review
and return to Capture mode.
Review button
The icons displayed with the picture
indicate applied features.
Picture Information Icons
Internal memory
Memory Card
072
2
Email
Favorite Print tag, # Protected Picture Picture Location
of copies number
Review
Mode indicator Low battery Exhausted battery (blinking)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
To Access the Review Menus
Use the Review menus to work with the pictures that are stored in internal
memory or on a card.
1
2
Press the Review button.
Press the Menu button.
3 Press the Menu button to turn off the menus.
Review Menus
Magnify (page 30)
Copy (page 34)
Protect (page 31)
Multi-up (page 29)
Image Storage (page 10)
Picture Information (page 35)
Slide Show (page 31)
Setup (page 41)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Viewing Single Pictures
1
Press the Review button.
The camera displays the last picture that
was taken or reviewed.
2
Press
to scroll backward or forward
through the pictures.
Review
Viewing Multiple Pictures
1
2
Press the Review button.
Press
.
Nine pictures (thumbnails) are displayed
at once.
Review
3 Press
to display the previous or next row of thumbnails.
to scroll through the thumbnails one at a time.
4 Press
The selected picture is highlighted in yellow.
5 Press the OK button to display a single view of the selected picture.
Viewing Multiple Pictures—Review Menu
You can also view multiple pictures through the Review menu, Multi-up option.
1
2
Press the Review button, then press the Menu button.
Highlight Multi-up , then press the OK button.
Nine pictures (thumbnails) are displayed at once.
3 Navigate through the thumbnails as described above.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Deleting Pictures
1
Press the Review button.
Delete
2
Select a picture in single view or highlight a
picture in multiple view, then press the
Delete button.
OK
Review
3 Highlight an option, then press the OK
button:
PICTURE—deletes the displayed picture.
EXIT—exits the Delete screen.
ALL—deletes all pictures from your current
storage location.
NOTE: Protected pictures cannot be deleted; remove protection before deleting
(page 31).
Magnifying Pictures
1
Press the Review button, then press the OK button.
The picture is displayed at 2X magnification. The Magnify icon
and the magnification value are displayed on the screen.
2
Press the OK button again to display the picture at 4X magnification.
3 Press
to view different parts of the picture.
4 Press the OK button again to redisplay the picture at the original size.
NOTE: You can also magnify pictures through the Magnify menu: press the
Review button, press the Menu button, highlight Magnify
press the OK button.
, then
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Protecting Pictures From Deletion
1
2
Press the Review button, then locate the picture to protect.
Press the Menu button.
3 Highlight Protect , then press the OK
button.
The Protect icon
appears with the
protected picture whenever it is displayed
in the status bar. The picture cannot be
deleted. (Formatting deletes even
protected pictures, see page 45).
4 To remove protection, press the OK button again.
5 Press the Menu button to turn off the menu.
Running a Slide Show
Use the Slide Show to display your pictures on the LCD in the order in which
you took them. To run a slide show on a television or other external device, see
page 33.
Starting the Slide Show
1
2
Press the Review button, then press the Menu button.
Highlight Slide Show
, then press the OK button.
3 Highlight Begin Show, then press the OK
button.
The pictures are each displayed once in
the order in which you took them. Then
the camera returns to the Menu screen.
See Turning On Loop, page 32, for
continual display.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
4 To cancel the Slide Show, press the OK button.
Changing the Display Interval
The default setting displays each picture for 5 seconds. You can increase the
display interval to up to 60 seconds.
1
On the Slide Show menu, highlight Interval,
then press the OK button.
2
Press
To scroll through the seconds quickly,
press and hold
to select a display interval.
.
3 Press the OK button.
The Interval setting remains until you change it.
Turning On Loop
When you turn on Loop, the slide show is continuously repeated.
1
On the Slide Show menu, press
scroll down to Loop; highlight Loop, then
press the OK button.
to
2
Highlight On, then press the OK button.
The loop slide show begins immediately.
It repeats continuously until you cancel
it by pressing the OK button or until
battery power is exhausted.
Loop reverts to Off when the loop slide
show stops.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Displaying Pictures on a Television
You can run a slide show or display your pictures on a television, computer
monitor, or digital projector (any device equipped with a video input).
NOTE: Ensure that the Video Out setting is correctly set to NTSC or PAL (see
page 44).
1
Connect the video cable from the video out
port on the camera to the video in port on
the television. (Refer to your television
User’s Guide for details on video in setup.)
Video out
port
The camera LCD turns off; the television
screen acts as the camera display.
2
You can now use the television screen to
review your pictures in single or multiple
views, run a slide show, or do anything on
the television screen that you can do on the
camera LCD.
NOTE: If you connect or disconnect the video cable while a slide show is
running, the slide show stops.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Copying Pictures
You can copy pictures from a card to internal memory, or from internal
memory to a card.
Before you copy make sure that:
! A card is inserted in the camera.
! The camera’s picture storage location is set to the location from which you
are copying. See Choosing Internal Memory or SD/MMC Card, page 10.
Copy pictures:
1
2
Press the Review button, then press the Menu button.
Highlight Copy
, then press the OK button.
3 Highlight an option:
PICTURE—copies the current picture from
your selected storage location to the other
location.
EXIT—returns to the Copy screen.
ALL—copies all pictures from your
selected storage location to the other
location.
4 Press the OK button.
A progress bar monitors the copy process.
NOTE: Pictures are copied, not moved. To remove the pictures from the
original location after they are copied, delete them (see page 30).
Tags and protection are not copied. Print, email, and Favorite tags
are not copied with the picture (see page 37 to re-apply tags).
Protection settings are not copied (see page 31 to re-apply protection).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Viewing Picture Information
1
Press the Review button, then press the
Menu button.
2
Highlight the Picture Info menu
press the OK button.
, then
The information about the displayed
picture is view-only and includes: file
name, location of the file if stored on a
card (there are no directories in internal
memory), date and time the picture was
taken, and the quality setting.
3 Press
information.
4 To exit Picture Info, press the OK button.
to display the previous/next picture, with that picture’s
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Tagging Pictures—Share
Mode
Press the Share button to tag your pictures as Favorites and for automatic
printing and emailing. But remember, you can press the Shutter button and
take a picture anytime, no matter what mode the camera is in!
NOTE: MAC OS 8.6 and 9.x do not support the Share button functions. OS X is
recommended for full functionality.
When Can I Tag My Pictures?
You can tag pictures whenever they are displayed on the LCD in Review mode
(see page 27).
To Access Share Mode/Menus
1
2
Press the Share button.
Press the Share button again to exit Share mode and return to Capture or
Review mode.
Share Menus
Print (page 38)
Email (page 39)
Favorite (page 40)
Print All (page 38)
Cancel Prints (page 38)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Tagging Pictures for Printing
1
Locate a picture, then press the
Share button.
Share
2
Highlight Print
and press
to select the
the OK button.
3 Press
number of copies (0-99). Zero
removes the tag for that picture.
The Print icon
appears
with the picture.
The default quantity is one. To change the default, see page 42.
4 To tag all pictures on the card or in internal memory, highlight Print All,
press the OK button, then indicate the number of copies as described
above.
5 To remove the print tagging for all pictures on the card or in internal
memory, highlight Cancel Prints, then press the OK button.
6 Press the Share button to return to Capture mode.
Printing Tagged Pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software Print screen opens and lets you immediately print your pictures. See
Kodak EasyShare software Help for details on printing.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Tagging Pictures for Emailing
First, use Kodak EasyShare software to create an email address book on your
computer, then copy up to 32 email addresses to the camera’s internal
memory. See Kodak EasyShare software Help for details.
1
Locate a picture, then press the
Share button.
Share
2
Highlight Email
press the OK button.
, then
3 Press
to highlight an
email address, then press the OK
button.
To send the picture to more than
one person, repeat step 3 for
each address.
Selected addresses are noted with a check mark, and the email icon
appears with the picture.
4 To remove a selection, highlight a checked address and press the OK
button. To remove all email selections, select Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved.
6 Press the Share button to return to Capture mode.
Emailing Tagged Pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software Email screen opens and lets you immediately send the pictures to the
addresses you specified. See the Kodak EasyShare software Help for details on
emailing.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Tagging Pictures as Favorites
1
Locate a picture, then press the
Share button.
Share
2
Highlight Favorite , then press
the OK button.
The Favorite icon
with the picture.
appears
3 To remove the tag, press the OK
button again.
4 Press the Share button to return
to Capture mode.
Using Favorites on Your Computer
See the Kodak EasyShare software Help for details on retrieving and organizing
Favorites on your computer.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Customizing Camera
Settings—Setup Mode
Use Setup mode
to customize your camera settings. You can access Setup
mode two ways: in the Capture menu screen and the Review menu screen.
In
In
Review
mode
Capture
mode
But remember, you can press the Shutter button and take a picture anytime, no
matter what mode the camera is in!
To Access Setup Mode/Menus
1
In Capture or Review mode, press the Menu button.
2
Highlight Setup
and press the OK button.
3 Press the Menu button to turn off the Setup menu and return to Capture or
Review mode.
Setup Menus
Return (page 42)
Video Out (page 44)
Language (page 6)
Format (page 45)
About (page 46)
Default Print Quantity (page 42)
Quickview (page 43)
Liveview (page 43)
Date/Time (page 7)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Returning to the Previous Menu
The Return feature lets you return to the menu screen from which you entered
the Setup menu.
! In the Setup menu, highlight Return
,
then press the OK button.
You are returned to the menu screen
from which you entered Setup: Capture or
Review.
Changing the Print Quantity Default
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen (see page 38). The default value is one.
1
2
In Capture or Review mode, press the Menu button.
Highlight Setup
, then press the OK button.
3 Highlight Default Print Quantity
, then
press the OK button.
4 Press
to indicate the new default
quantity, then press the OK button.
5 Press the Menu button to turn off the menu.
This setting remains until you change it.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Turning Off Quickview
After you take a picture, Quickview displays it on the LCD for 5 seconds (see
page 17). The default setting is on. To save battery power, turn off Quickview:
1
In Capture or Review mode, press the Menu button.
2
Highlight Setup
, then press the OK button.
, then press the OK button.
3 Highlight Quickview
4 Highlight Off, then press the OK button.
5 Press the Menu button to turn off the menu.
The picture is not automatically displayed on the LCD after you take it.
To see the picture, press the Review button.
This setting remains until you change it.
Turning On Liveview
The Liveview feature displays a live image on the LCD so you can frame your
picture in the LCD instead of the Viewfinder (see page 16). The default setting
is Off, which means that you must press the OK button to see the live image.
IMPORTANT: Liveview quickly depletes battery power; use it
sparingly.
Turn on Liveview:
1
In Capture or Review mode, press the Menu button.
2
Highlight Setup
, then press the OK button.
, then press the OK button.
3 Highlight Liveview
4 Highlight On, then press the OK button.
The live image is displayed whenever the camera is on. Liveview
automatically turns off after one minute to conserve battery power.
You can manually turn it back on by pressing the OK button.
5 Press the Menu button to turn off the menu.
This setting remains until you change it.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Setting Video Out
The Video Out feature lets you match the camera’s video signal to the standard
for your location. Video Out must be set correctly to run a slide show on an
external device (see page 33).
1
In Capture or Review mode, press the Menu button.
2
Highlight Setup
, then press the OK button.
, then press the OK button.
3 Highlight Video Out
4 Highlight an option:
NTSC—used in the United States and Japan
and most countries outside of Europe.
PAL—used in European countries.
5 Press the OK button to accept the change
and return to the Setup menu.
6 Press the Menu button to turn off the menu.
This setting remains until you change it.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Formatting Memory or MMC/SD Card
CAUTION:
Formatting deletes everything in memory or on the card,
even protected pictures and the internal email address
book. Removing a card during formatting may damage the
card.
1
2
In Capture or Review mode, press the Menu button.
Highlight Setup
, then press the OK button.
3 Highlight Format
, then press the OK
button.
4 Highlight an option:
CARD—deletes everything on the card,
even protected pictures, and reformats the
card for use in the camera.
CANCEL—exits without making a change.
INTERNAL—reformats and deletes
everything in internal memory, even
protected pictures and the address book.
5 Press the OK button.
6 Highlight Continue, then press the OK button.
Once formatting begins, it is completed even if you turn off the camera
or change modes.
When the formatting is complete, the Setup menu is redisplayed.
7
Press the Menu button to turn off the menu.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Viewing Camera Information
The About feature displays information that is helpful if you need to call for
service on your camera.
1
2
In Capture or Review mode, press the Menu button.
Highlight Setup
, then press the OK button.
3 Highlight About
, then press the OK
button.
The camera information is view-only.
4 Press the Menu button to turn off the menu.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Installing the Software
System Requirements
Windows System Requirements
! Personal computer for Windows 98, 98SE, ME, 2000*, or XP* operating
systems
! 233 MHz processor or greater
! 64 MB of available RAM (128 MB for Windows XP)
! 100 MB of available hard disk space
! CD-ROM drive
! Available USB port
! Color monitor with a minimum resolution of 800 x 600 pixels; High Color
(16-bit) or True Color (24-bit) recommended
! Internet access for online printing and emailing
* For Windows 2000 and XP operating systems you must have
Administrator rights to install software.
Mac OS X System Requirements
! Power Mac G3, G4, G4 Cube; iMAC; PowerBook G3, G4; iBook computer
! Mac OS 10.1.2, minimum
! 128 MB of available RAM
! 200 MB of available hard disk space
! CD-ROM drive
! Built-in USB port
! Color monitor with a minimum resolution of 800 x 600 pixels; thousands
or millions of colors recommended
! Internet access for online printing and emailing
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Mac OS 8.6 and 9.x System Requirements
! PowerPC-based Macintosh computer
! Mac OS 8.6/9.x
! 64 MB of available RAM
! 200 MB of available hard disk space
! CD-ROM drive
! Built-in USB port
! Color monitor with a minimum resolution of 800 x 600 pixels; thousands
or millions of colors recommended
! Internet access for online printing and emailing
NOTE: Mac OS 8.6 and 9.x do not support the Share button functions.
Mac OS X is recommended for full functionality.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Install the Software
For information on the software applications included on the Kodak EasyShare
software CD, see the Kodak EasyShare software Help.
CAUTION:
Do not install the Kodak
EasyShare software with the
camera or camera dock
connected to the computer. It
may cause the software to load
incorrectly. If you have already
connected, disconnect the
camera or camera dock before
you proceed.
1
Before you begin, close all software applications that are open on your
computer.
2
Place the Kodak EasyShare software CD into the CD drive.
3 Load the software:
On a Windows OS-based computer—if the install window does not
appear, choose Run from the Start menu and type d:\setup.exe (if d is
the drive letter that contains the CD).
On Mac OS 8.6 and 9.x—on the install window, click Continue.
On Mac OS X—double-click the CD icon on the desktop, then click the
Install icon.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
4 Follow the on-screen instructions to install the software. If prompted,
restart the computer when the installation is complete.
! Select Typical to automatically install the needed applications on
Windows OS-based computers. Select Custom to choose the
applications to install.
! Select Easy to automatically install the needed applications on
Macintosh computers running OS 8.6 or 9.x.
! Follow the on-screen instructions to install the software on Macintosh
computers running OS X.
NOTE: When prompted, take a few minutes to electronically register your
camera and software. This lets you receive information regarding
software updates and registers some of the products included with the
camera. You must be connected to your Internet service provider to
register electronically.
For further installation help, see the Quick Start Guide.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Connecting to the Computer
Important—Before You Connect
Install the software from the Kodak EasyShare software CD BEFORE you
connect the camera or camera dock to the computer.
Connecting to the Computer
You can transfer your pictures from the camera to the computer using either
the camera alone or the optional Kodak EasyShare camera dock or camera
dock II. See page 55 for connecting with a camera dock.
Transferring Pictures With the USB Cable
1
2
Turn off the camera.
Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
See your computer User’s Guide for details.
3 Plug the other end of the USB cable into the
labeled USB port on the camera.
4 Turn on the camera to begin transferring.
Kodak EasyShare software opens on your
computer and prompts you through the
transfer process.
An optional AC adapter is available for your camera; it saves battery power
when transferring pictures (see page 87).
NOTE: You can also use a Kodak multi-card reader or Kodak SD multimedia
card reader-writer to transfer your pictures. See a dealer of Kodak
products or visit our Web site at http://www.kodak.com/go/
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Transferring Pictures to Your Computer
For details on transferring pictures, see the Quick Start Guide or the Kodak
EasyShare software Help.
Printing Pictures from Your Computer
For details on printing pictures from your computer and ordering prints
online, see the Kodak EasyShare software Help.
Printing from an SD/MMC Card
! Automatically print tagged pictures when you insert your card into a printer
with an SD/MMC slot. See your printer user guide for details.
! Contact your local retailer for the availability to print professionally from
SD/MMC cards.
! Make your own prints at a Kodak picture maker kiosk with a built-in SD/
MMC slot.
Print With or Without a Computer
Dock your camera to the Kodak EasyShare printer dock 4000 and print
directly—without using a computer. Purchase this and other accessories at a
dealer of Kodak products or visit www.kodak.com/go/cx4310accessories.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Using the Optional Camera
Dock II
The Kodak EasyShare camera dock II (camera dock) makes it easy to transfer
your pictures to the computer. The camera dock is also a rapid battery charger
for the included Kodak EasyShare Ni-MH rechargeable battery pack, and
supplies power to the camera.
To keep the battery pack charged and the camera always ready to take
pictures, store your camera in the camera dock.
Camera Dock Package Contents
1
2
Camera dock
7-volt AC power adapter
2
3
Some AC adapters may be different from
the one pictured.
3 Universal insert
4
4 Kodak EasyShare Ni-MH rechargeable
1
battery pack
5 Quick Start Guide (not shown)
Purchase an optional Kodak EasyShare camera dock II at a dealer of Kodak
products or visit our Web site at http://www.kodak.com/go/
CAUTION:
Do not use the digital camera 3-volt AC adapter with a
Kodak EasyShare camera dock; it is NOT compatible.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Installing the Camera Insert
Kodak EasyShare digital cameras are packaged with a custom camera insert,
which is used to perfectly fit the camera to the camera dock.
1
Place the front tabs on the custom insert
into the slots in the camera dock cavity.
2
Fit the insert down into the cavity and snap
the insert into place.
If You Do Not Have the Custom Insert
If you do not have the custom insert that was included with your camera, use
the universal insert that is included with the camera dock II. The universal
insert works with all Kodak EasyShare cameras, but it does not fit the cameras
perfectly.
To order a custom camera insert visit our Web site at http://www.kodak.com/
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Connecting the Camera Dock
After the Kodak EasyShare software is loaded (see page 49), connect the
camera dock to your computer and to an external power source. You will
need:
! the USB cable included with your camera
! the 7-volt AC adapter included with the camera dock
IMPORTANT: Make sure your camera is NOT in the camera dock
when you are connecting to power and the computer.
1
Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
See your computer User’s Guide for details.
Plug the other end of the USB cable into the
square USB connector on the back of the
camera dock.
1
2
2
3
3 Plug the AC adapter into the round power
connector on the back of the camera dock
and into a power outlet.
Your AC adapter may be different from
the one pictured or may have additional
plugs. Use the plug that accommodates
your type of power outlet.
DC
IN
3V
Leave the camera dock connected to the computer for easy access for
transferring pictures and charging the battery pack.
IMPORTANT: Use only the 7-volt AC adapter included with the
camera dock. Other adapters may cause damage to
your camera, camera dock, or computer.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Installing the Battery Pack in the Camera
1
Open the battery door on the bottom of the
camera.
2
Install the battery pack as illustrated.
CAUTION:
The battery pack can only be
inserted into the camera in the
orientation shown. If the
battery pack does not easily
install, reposition it and try
again. DO NOT FORCE IT. Doing
so can damage your camera.
3 Close the battery door.
IMPORTANT: The battery pack is not charged when you receive it.
See page 58 for charging instructions.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Docking the Camera
When you are ready to transfer your pictures from the camera to the computer,
or to charge the battery pack, place the camera in the camera dock.
1
2
Turn off the camera.
On the camera bottom, slide the connector
cover open.
Connector cover
3 Place the camera in the camera dock and
push down to seat the connectors.
The Power/Transfer light glows
green when the camera is properly
seated.
The camera is now powered by the
camera dock instead of the camera
batteries.
Connector
Power/Transfer light
NOTE: If the Kodak EasyShare Ni-MH rechargeable battery pack is in the
camera, the camera dock immediately begins charging (see page 58).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Charging the Battery Pack
The battery pack is not charged when you receive it.
1
2
Turn off the camera.
Make sure the battery pack is installed in the camera (see page 56).
3 Place the camera in the camera dock (see page 57).
! Charging begins immediately.
! The three green charging lights monitor the charging status:
Charging Lights on Dock II
battery low
battery partially charged
battery fully charged
! Full charging takes about 2.5 hours. After the battery pack is fully
charged, leave the camera in the camera dock to maintain the full
charge.
! Charging stops if you turn on the camera. If the camera is left in the
camera dock with the power on, charging resumes when the camera
enters Auto Power-off (see page 87).
NOTE: The camera dock only charges the provided Kodak EasyShare Ni-MH
rechargeable battery pack. If you place the camera in the camera dock
with any other type of batteries, rechargable or not, no charging takes
place.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Transferring Pictures
To transfer pictures from your camera to your computer:
1
Turn off the camera and place the
camera in the camera dock.
Push the Connect button.
2
The Power/Transfer light blinks
green while the pictures are
transferring. Charging is
Connect
suspended during transfer.
Power/Transfer light
blinks
Kodak EasyShare software opens
on your computer and prompts
you through the transfer
process.
3 For details on transferring, organizing, printing, emailing, and editing your
pictures, see the Kodak EasyShare software Help.
NOTE: When your pictures are transferred, leave the camera in the camera
dock. Eight minutes after the transfer is complete, the camera dock
resumes charging as necessary.
Caution When Using a Tripod
Do not connect a tripod to the camera dock. Remove the camera from the
camera dock and connect the tripod directly to the camera.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
Earlier Camera Dock Model
If you have the Kodak EasyShare camera dock, not the camera dock II, the
functionality is exactly the same as described in this chapter. The only
difference is that the earlier camera dock has one indicator light.
Indicator light status:
Steady green—camera is properly seated
in the camera dock.
Blinking green— pictures are
transferring.
Steady red—battery pack is charging.
Blinking red—error condition.
Indicator light
60
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Troubleshooting
This chapter contains help for your Kodak EasyShare CX4310 digital camera or
camera dock II.
Additional technical information is available in the ReadMe file located on the
Kodak EasyShare software CD. For updates to Troubleshooting information,
Troubleshooting—Camera
Camera Problems
Camera
Problem
Camera does not Battery is not properly Remove and reinstall the
turn on. installed. batteries (page 4).
Cause
Solution
Battery is not charged. Replace or recharge the
batteries (page 4, page 58).
On/Off switch is not
completely in the On
position.
Turn the camera off then
back on (page 5).
Camera does not The camera has been
Remove the batteries and
turn on in cold
temperatures.
exposedtotemperatures slowly return the camera
close to the lower
operating range.
and batteries to room
temperature. Reinstall or
replace the batteries
(page 4).
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera
Problem
Cause
Solution
Camera does not Alkaline batteries were DO NOT USE ALKALINE
turn off.
installed in the camera. BATTERIES. Turn off the
power switch, remove the
alkaline batteries, and
replace with an approved
battery type (page 12).
If the power switch is on
when you replace the
batteries, the camera may
not turn back on. In that
case, turn the power switch
off, then on.
Shutterbuttondoes Camera is not turned on. Turn on the camera
not work.
(page 5).
The camera is
Wait until the light stops
processing a picture; the blinking before attempting
ready light is blinking. to take another picture.
The card or internal
memory is full.
Transfer pictures to your
computer (page 52), delete
pictures from the camera
(page 30), switch storage
locations (page 10), or
insert a card with available
memory (page 9).
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera
Problem
Cause
Solution
Part of the picture Something was blocking Keep hands, fingers, or other
is missing.
the lens when the
picture was taken.
objects away from the lens
when taking pictures.
Your eye or the picture Leave space around subject
was not centered
correctly in the
viewfinder.
when centering picture in
viewfinder.
In Review mode, The camera may not be Check the picture storage
you do not see a accessing the correct
picture on the LCD storage location.
or do not see the
location setting (page 10).
picture you
expected.
In Review mode, The pictures were taken Transfer the pictures to the
pictures are with a different camera computer (page 52), or
displayed as black or were generated with delete the picture (page 30).
screens. other software.
Picture is too dark. Flash is not on or did not Turn on the flash (page 18).
function.
The subject is too far
Move so there is no more
away for the flash to have than the following distance
an effect.
between the camera and the
subject: 9.8 ft (3 m).
The subject is in front of Use Fill flash (page 18) or
a bright light (backlit). change your position so the
light is not behind the
subject.
Lighting condition is too Increase exposure
dark.
compensation (page 23).
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera
Problem
Cause
Solution
Camera freezes up Camera detects an error Turn the camera off, then
when a card is
inserted or
removed.
when the card was
inserted or removed.
back on. Make sure the
camera is turned off before
inserting or removing a
card.
Picture is too light. The flash is not needed. Change to Auto flash
(page 18).
The subject was too
Move so there is at least 1.6
close when the flash was ft (0.5 m) between the
used.
camera and the subject.
Lighting condition is too Decrease exposure
bright.
compensation (page 23).
Stored pictures are The card was removed Make sure the ready light is
damaged.
when the ready light was not blinking, then turn off
blinking.
the camera before removing
the card.
Pictures remaining Picture does not take up The camera is operating
number does not sufficient space to
decrease after decrease the picture
taking a picture. remaining number.
normally. Continue taking
pictures.
Picture orientation The camera sensed that Set the Orientation Sensor
is not accurate. it was rotated or tilted (page 26). Turn off the
while the picture was
taken.
Orientation Sensor when
your subject is above or
below you (such as in the
sky or on the floor).
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera
Problem
Cause
Solution
Picture is not clear. The lens is dirty.
Clean the lens (page 84).
Subject too close when Move so there is at least 11.8
taking picture.
in (0.3 m) between the
camera and the subject; or
turn on Close-up (page 21).
Camera may be in Close- Turn off Close-up (page 21).
up (page 21) and the
subject is too far away
for proper focus.
Subject or the camera Hold the camera steady
moved while the picture while taking the picture and
was taken.
for at least one second after
pressing the Shutter button.
The subject is too far
Move so there is no more
away for the flash to be than the following distance
effective.
between the camera and the
subject: 9.8 ft (3 m).
Slide show does
not run on external incorrect.
video device.
Video Out setting is
Adjust the camera Video Out
setting (NTSC or PAL,
page 44).
External device is set
incorrectly.
Refer to the external device’s
user’s guide.
Slide show does
not run on LCD
screen.
The camera may not be Check the picture storage
accessing the correct
storage location.
location setting (page 10).
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera/Computer Communications
Camera Communications
Problem
Cause
Solution
The computer
cannot
There is a problem with See the following file on the
the configuration of the Kodak EasyShare software
communicate with USB port on your
CD: USB.html
the camera.
computer.
Or, go to: www.kodak.com/
Camera power is off.
Turn on the camera
(page 5).
Battery is not charged. Replace or recharge the
batteries (page 4, page 58).
Some Advanced Power See the Power Management
Management utilities on section of your laptop user’s
laptops can turn off
ports to save battery life.
guide to disable this feature.
Software is not installed. Install the software
(page 49).
USB cable is not
securely connected.
Connect cable to camera and
computer port (page 51).
There are too many
Disconnect your camera
applications running on from the computer. Close all
your computer.
software applications,
reconnect your camera and
try again.
The Battery Monitor or Close that software before
similar software runs starting the Kodak software.
constantly.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera Communications
Problem
Cause
Solution
Cannot transfer
pictures to
computer. The Add
New Hardware
Wizard cannot
locate drivers.
Software is not installed ! Disconnect USB cable, or
on computer.
camera dock, from
computer.
! Install Kodak EasyShare
software (page 49).
Cannot transfer
pictures to
computer.
Software is not fully or ! Disconnect USB cable, or
correctly installed on
computer.
camera dock, from
computer.
! Uninstall the software:
Start→Settings→
Control Panel→Add/
Remove Programs
! Re-install Kodak
EasyShare software
(page 49).
! See the Kodak Web site
devoted to installing the
Kodak EasyShare
software on various
operating systems
(page 77).
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
SD/MMC Cards
SD/MMC Card
Problem
Cause
Solution
The camera does not The card may not be Purchase a certified SD/MMC
recognize your SD/ SD/MMC certified.
card (page 9).
MMC card.
The card may be
corrupt.
Reformat the card (page 45).
Caution: Formatting erases all
pictures from the card.
No card is inserted in Insert a card into the card slot,
camera or card is not then push to seat the connector
fully inserted.
(page 9).
Camera freezes up Camera detects an
Turn the camera off, then back
when a card is
error when the card on.
inserted or removed. was inserted or
removed.
Make sure the camera is off when
inserting or removing a card.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera LCD Messages
LCD Messages
Message
Cause
Solution
No images to display There are no pictures Change your picture
in the current storage storage location setting
location.
(page 10).
Memory card requires The card is corrupted Insert a new card or format
formatting
or formatted for
another digital camera.
the card (page 45).
Memory card cannot
be read (Please format
memory card or insert
another memory card)
Internal memory
requires formatting
The camera internal
Format the internal
memory is corrupted. memory (page 45).
Internal memory
cannot be read (Please
format internal
memory)
No memory card, Files There is no card in the Turn off the camera and
not copied
camera. Your pictures insert a card.
were not copied.
Not enough space to There is not enough
Delete pictures from the
space in the location location you are copying to
you are copying to (page 30), or insert a new
copy files
(internal memory or card.
the card).
Read only memory
card, change to
internal memory to
capture
The card in the camera To take a picture, insert a
is write-protected.
new card or change storage
location to internal
memory (page 10).
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
LCD Messages
Message
Cause
Solution
Memory card is
protected
Switch on card is in
Reset the switch as shown
write-protect position. on LCD.
Reset switch on card
Card is locked
The card in the camera To take a picture, insert a
is write-protected.
new card or change storage
location to internal
memory (page 10).
Date/Timeentryscreen This is the first time you Reset the clock (page 7).
appears automatically turned on the camera;
or the batteries have
been removed for an
extended period of
time; or the batteries
are exhausted.
High camera
The internal
Leave the camera off for
several minutes, then turn
temperature. (Camera temperature of the
will be turned off.)
Memory Card is full
camera is too high for it back on.
the camera to operate.
The viewfinder light
glows red and the
camera will turn off in
five seconds.
If the message reappears,
repeat the sequence above
until the message does not
appear.
There is no more space Delete pictures from the
on the card in the
camera.
card (page 30), insert a
new card, or change
storage location to internal
memory (page 10).
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
LCD Messages
Message
Cause
Solution
Internal Memory is full There is no more space Delete pictures from the
in the camera’s internal internalmemory(page 30)
memory.
or change storage location
to Auto and insert card
(page 10).
Unrecognized File
Format
The camera cannot
read the picture format. picture to the computer
(page 52), or delete the
Transfer the unreadable
picture (page 30).
No Address Book in
No email addresses
Create and copy address
Camera (Connect with appear because there is book from your computer.
computer to import
address book)
no address book.
See Kodak EasyShare
software Help.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera Ready Light Status
Ready light
Camera Ready Light
Light Status
Cause
Solution
Ready light does not Camera is not turned Turn on the camera
turn on and the
camera does not
work.
on.
(page 5).
Batteries are
exhausted.
Replace or recharge the
batteries (page 4, page 58).
Power switch was on Turn camera off, then back
when batteries were on.
reloaded.
Ready light glows
steady green.
Camera is on; ready The camera is operating
to take a picture.
normally.
Ready light blinks red. Batteries are low or Replace or recharge the
exhausted. batteries (page 4, page 58).
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera Ready Light
Light Status
Cause
Camera’s internal
Solution
Ready light glows
steady red.
Transfer pictures to your
memory or card is computer (page 52), delete
full.
pictures from the camera
(page 30), switch storage
locations (page 10), or
insert a card with available
memory.
Camera processing Wait. Resume picture taking
memory is full.
when the light turns green.
Your card is read-
only.
Change your storage location
to internal memory (see
page 10), or use a different
card.
Ready light blinks
green.
Picture is being
processed and saved normally.
to the camera.
Camera is operating
Ready light blinks
orange.
Flash is not charged. Wait. Resume picture taking
when the light stops blinking
and turns green.
Auto exposure or
auto focus are not
locked.
Release the Shutter button
and recompose the picture.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Troubleshooting—Camera Dock II
Camera Dock II Problems
Camera Dock
Problem
Cause
Solution
Pictures are not
transferred to the
computer
AC adapter or USB Check the connections (page 55).
cable is not
securely
connected.
Software is not
installed.
Install the software (page 49).
Close all software applications
There are too
manyapplications and try again.
running on your
computer.
Camera was
Replace the camera on the
removed from the camera dock and press the
camera dock
during picture
transfer.
Connect button.
Connect button Press the Connect button.
was not pressed.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera Dock II Light Status
Battery charging
lights
Power/Transfer
light
Camera Dock Power/Transfer Light
Light Status
Cause
Comment
Light glows steady
green
Camera is properly seated in The camera and camera
the camera dock.
dock are operating
normally.
Light blinks green
Pictures are being
transferred to the computer.
Light is off
Camera is not properly
seated in camera dock.
Remove the camera and
re-seat it (page 57).
Camera Dock Charging Lights
Light Status
Cause
Comment
Charging has not
started.
The camera is not in the camera
dock.
Camera is turned on. Turn off to
begin charging.
No lights
Battery in camera is not a Kodak
EasyShare Ni-MH rechargeable
battery pack.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
Camera Dock Charging Lights
Light Status
Cause
Comment
Battery is low.
The camera and camera dock
are operating normally.
One green light
Two green lights
Three green lights
Battery is partially
charged.
Battery is fully
charged.
Camera Dock Error Light
Light Status
Cause
Comment
Battery pack is installed
incorrectly.
Reinstall the battery pack
(page 56).
One blinking red
light
The battery pack or
connector pins are
damaged.
Check for damage.
The camera andbattery pack Slowly return the camera
have been exposed to very and battery pack to room
high or low temperatures. temperature.
Battery in camera is not
Install a Kodak EasyShare
rechargeable or no battery Ni-MH rechargeable
pack is installed in camera. battery pack (page 56).
76
Download from Www.Somanuals.com. All Manuals Search And Download.
10Getting Help
Helpful Web Links
For help navigating through a
Windows OS-based computer
and working with digital
pictures.
http://www.kodak.com/go/cx4310support For help with your Kodak
EasyShare CX4310 digital
camera.
To download the latest camera
software and firmware.
To optimize your printer for
prints with truer, vibrant colors.
http://www.kodak.com/go/camerasupport For product support on cameras,
software, accessories, and more.
To purchase a full range of
digital camera accessories.
http://www.kodak.com/go/
EasyShareSWHelpWin
To get help installing the Kodak
EasyShare software.
http://www.kodak.com/go/
EasyShareSWHelpMacOS9
http://www.kodak.com/go/register
To register your new Kodak
EasyShare CX4310 digital
camera.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10
Help in this User Guide
See Chapter 9, Troubleshooting, for help with problems you may have with
your camera, camera/computer connections, camera dock, or SD/MMC cards.
Software Help
For help with the software included on the Kodak EasyShare software CD, see
the Quick Start Guide or the Kodak EasyShare software Help.
Telephone Customer Support
If you have questions concerning the operation of the software or camera, you
may speak directly to a customer support representative.
Customer support hours vary by location.
Before You Call
Before you call to speak to a customer support representative, please have the
camera connected to your computer, be at your computer, and have the
following information available:
Operating system __________________________________________
Processor speed (MHz) _____________________________________
Computer model __________________________________________
Amount of memory (MB) ____________________________________
Exact error message you received_______________________________
Version of installation CD____________________________________
Camera serial number______________________________________
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10
Telephone Numbers
Australia
1800 147 701
Austria/Osterreich
Belgium/Belgique
Brazil
0179 567 357
02 713 14 45
0800 150000
1 800 465 6325
800 820 6027
3 848 71 30
Canada
China
Denmark/Danmark
Ireland/Eire
Finland/Suomi
France
01 407 3054
0800 1 17056
01 55 1740 77
069 5007 0035
00800 441 25605
800 901 514
Germany/Deutschland
Greece
Hong Kong
India
91 22 617 5823
02 696 33452
81 3 5644 5500
0798 631 0024
020 346 9372
0800 440 786
23 16 21 33
Italy/Italia
Japan
Korea
Netherlands/Nederland
New Zealand
Norway/Norge
Philippines
Portugal
1 800 1 888 9600
021 415 4125
800 6363 036
Singapore
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 10
Spain/España
91 749 76 53
08 587 704 21
Sweden/Sverige
Switzerland/Schweiz/Suisse 01 838 53 51
Taiwan
0080 861 008
Thailand
001 800 631 0017
0870 243 0270
1 800 235 6325
585 726 7260
UK
United States
Outside the United States
International Toll Line
+44 131 458 6714
International Toll Fax Number +44 131 458 6962
These telephone numbers change occasionally. For the most up-to-date
listings, visit: http://www.kodak.com/US/en/digital/contacts/
80
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Appendix
This appendix serves as a resource for technical information about your Kodak
EasyShare CX4310 digital camera, Kodak EasyShare camera dock II, SD/MMC
cards, batteries, and available accessories.
Camera Specifications
Specifications—Kodak EasyShare CX4310 digital camera
Pixel Resolution Best - 3.2 MP, low 2080 x 1544, 1/5 JPEG compressed
compression
(by Quality
setting)
Better - 3.2 MP,
high compression
2080 x 1544, 1/10 JPEG compressed
Good - 0.8 MP
1024 x 768, 1/5 JPEG compressed
24-bit, millions of colors
Color
Picture File Format
Picture Storage
EXIF 2.2 (JPEG compression)
16 MB internal memory
MMC (MultiMedia) or SD card, optional
Viewfinder
Optical—Reverse Galilean
100
ISO Sensitivity
Flash Range
1.6 to 9.8 ft (0.5 to 3 m)
.25 in. (6 mm) threaded
NTSC or PAL
Tripod Socket
Video Out
Operating Temperature
32 to 104° F (0 to 40° C)
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Specifications—Kodak EasyShare CX4310 digital camera
Power
Batteries
2 Ni-MH, AA rechargeable
2 Kodak AA digital camera batteries
Kodak CRV3 lithium battery
2 Lithium, AA
Alkaline batteries not recommended
Battery pack,
Kodak EasyShare Ni-MH rechargeable
camera dock only battery pack, recharge in camera dock
only.
Dock provides power to the camera.
3V, DC power in Optional AC adapter available (see
page 87)
Lens
Type
Optical quality glass
f/3.5
Maximum
Aperture
Zoom, 2X
2X Digital zoom
Focal Length
Focus Distance
36 mm (equivalent to 35 mm camera)
11.8 in. (300 mm) to infinity
Focus Distance, 5.9 to 19.7 in. (150 to 500 mm)
Close-Up
Dimensions
Weight
Width
Length
Height
4.3 in. (109 mm)
1.6 in. (41 mm)
2.6 in. (66 mm)
7.1 oz (200 g) without batteries or card
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Original Factory Settings—Camera
Feature
Factory Setting
Date/Time
2001/1/1; 12:00
Date Stamp
Exposure Compensation
Flash
Off
0
Auto
Image Storage
Liveview
Auto
Off
Orientation Sensor
Print Quantity
Quality
On
1
Best 3.2 MP, low compression
Quickview
On
Self Timer
Off
Slide Show Interval
Video Out
5 seconds
NTSC
Upgrading Your Software and Firmware
Take advantage of the latest enhancements to your Kodak software and camera
firmware. Software refers to the applications included on the Kodak EasyShare
software CD. Camera firmware is the internal software that runs on the camera.
To download the latest versions of software and firmware, go to: http://
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Tips, Safety, Maintenance
! Always follow basic safety precautions. Refer to the “Important Safety
Instructions” booklet packed with your camera.
! Do not allow any chemicals, such as suntan lotion, to come into contact
with the painted surface of the camera.
! If the camera has been subjected to inclement weather or you suspect
water has gotten inside the camera, turn off the camera and remove the
battery and card. Allow all components to air-dry for at least 24 hours
before using the camera again.
! Clean the lens and LCD:
1
Blow gently on the lens or LCD to remove dust and dirt.
Moisten the lens or LCD by breathing lightly on it.
2
3 Wipe the lens or LCD gently with a soft, lint-free cloth or an untreated
lens-cleaning tissue.
Do not use cleaning solutions unless they are designed specifically for
camera lenses. Do not wipe the camera lens or LCD with chemically
treated eyeglass lens tissue. It may scratch the lens.
! Clean the outside of the camera by wiping with a clean, dry cloth. Never use
harsh or abrasive cleaners or organic solvents on the camera or any of its
parts.
! Service agreements are available in some countries. Please contact a dealer
of Kodak products for more information.
www.kodak.com/go/cx4310support.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Picture Storage Capacities
Picture file sizes can vary. You may be able to store more or fewer pictures.
Purchase cards on our Web site at http://www.kodak.com/go/
Store this many pictures at:
Best
Better
Good
59
16 MB internal memory
8 MB MMC/card
16 MB card
14
7
29
14
29
59
29
14
29
59
90
180
59
32 MB card
120
240
360
720
64 MB card
120
180
360
96 MB card
192 MB card
Locating Pictures on an MMC/SD Card
Pictures stored on MMC/SD Cards use a standard agreed upon by many camera
manufacturers. This lets you use the cards in different cameras. If you use a
card reader to retrieve your files, the following description of the card file
structure may be helpful.
MISC folder—contains the order files created when you use the Share
feature to tag files for printing, emailing, and as Favorites.
SYSTEM folder—used for updating camera firmware.
DCIM folder—root level folder, contains the 100K4310 folder. Each time you
turn on the camera or insert a different card, any empty folders within the
DCIM folder are removed.
100K4310 subfolder—contains all the pictures on the card.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Card File Naming Conventions
! Pictures are named DCP_nnnn.JPG, and are numbered in the order in
which they are taken. The first picture is named DCP_0001.JPG; the highest
number allowed is DCP_9999.JPG.
! When a card contains a picture named DCP_9999.JPG in the
\DCIM\100K4310 folder, subsequent pictures appear in a new folder
(\DCIM\101K4310), beginning with picture DCP_0001.JPG.
! Even if you transfer pictures to the computer or delete pictures from the
camera, the camera continues to use consecutive numbers for all
subsequent pictures. For example, if the last picture taken was
DCP_0007.JPG and you delete it, the next picture you take is named
DCP_0008.JPG.
! When you insert a different card into your camera, the next picture number
is defined by incrementing the higher of the last picture taken by the
camera, or the highest existing picture number in the folder.
! If you use the card in a camera other than the Kodak EasyShare CX4310
digital camera, and that camera manufacturer adheres to this file structure
standard, the \DCIM folder contains a folder named by that camera. For
more information, refer to the documentation that accompanied that
camera.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Battery-Saving Features
The LCD or camera turn off when the camera has been inactive.
Camera state
If no activity, LCD If no activity,
To reactivate
turns off after:
camera turns camera:
off after:
LCD Off
N/A
8 minutes
(Auto Power-off)
Press any button
LCD On; Liveview, 1 minute
Review, any menu
screen
Quickview on
Slide show
5 seconds
1 minute after slide
show ends
Any state
N/A
1 hour
(Camera off)
Turn power
switch off and on
Optional AC Adapter
! Use the 3-volt AC adapter when reviewing,
copying, and transferring pictures.
! Connect the 3-volt AC adapter to the
DC-in
port
camera’s DC-in port and to a power outlet.
CAUTION:
Do not use the 3-volt AC adapter with a Kodak EasyShare
camera dock; it is NOT compatible.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
Camera Dock II Specifications
Specifications—Kodak EasyShare camera dock II
Communication with USB
computer
Cable included with Kodak EasyShare
cameras
Dimensions
(without insert)
Width/Depth/ 5.9 in. /4.1 in. /1.4 in.
Height
(150 mm/104 mm/35 mm)
Weight
5.5 oz (156 g)
Indicator lights
Power/
Transfer
Indicates operating/transferring
pictures
Charging, 3
lights
Indicate charging and error conditions
Input voltage
Power
7
0.7 V DC
DC input
AC adapter included with camera dock
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 11
FCC Compliance and Advisory
Kodak EasyShare CX4310 digital camera
Tested to comply with FCC Standards.
FOR HOME OR OFFICE USE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed or used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: 1) reorient or relocate the receiving antenna; 2) increase
the separation between the equipment and the receiver; 3) connect the
equipment to an outlet on a circuit different from that to which the receiver is
connected; 4) consult the dealer or an experienced radio/TV technician for
additional suggestions.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Where shielded interface cables have been provided with the product or
specified additional components or accessories elsewhere defined to be used
with the installation of the product, they must be used in order to ensure
compliance with FCC regulation.
Canadian DOC Statement
DOC Class B Compliance—This Class B digital apparatus complies with
Canadian ICES-003.
Observation des normes-Class B—Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du Canada.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
A
about
extending life, 13
loading, 4
camera information, 46
picture information, 35
AC adapter, optional, 87
accessories
power level icon, 27
battery, 13
printer dock, 52
accessories, buying, 77
adjusting
safety, 13
buttons, camera, ii
C
exposure, 23
picture quality,
resolution, 24
cables
power, camera dock, 55
power, camera optional, 87
USB, connect camera, 51
USB, connect dock, 55
video, 33
alkaline batteries, warning, 4
arrow button, 5
auto
flash, 18
power-off, 87
camera dock
charging battery pack, 58
docking camera, 57
earlier model, 60
installing insert, 54
lights status, 75
storage location, 10
B
backlit scenes, 23
batteries
alkaline warning, 4
capacities, 12
charging battery pack, 58
package contents, 53
power connection, 55
specifications, 88
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
transferring pictures, 59
USB connection, 55
using, 53
Canadian compliance, 89
cap, lens, 3
capacity
contents
internal memory/cards, 85
capture mode
camera dock package, 53
accessing menus, 20
copying pictures
overview, 11
returning from other
modes, 20
to computer, 52, 59
CRV3 battery, installing, 4
taking pictures, 15
custom insert, 54
card, memory, 9, 10, 85, 86
caring for your camera, 84
changing storage location, 10
charging battery pack, 58
charging lights, camera dock
II, 58, 75
customer support numbers, 78
customizing camera settings, 41
D
date
imprinting on pictures, 25
setting, 7
cleaning camera, lens, 84
date stamp, 25
DCIM folder, card, 85
defaults
changing print quantity, 42
original factory settings, 83
delete button, ii
deleting
clock, setting, 7
close-up scenes, 21
communication problems, 66
compensation, exposure, 23
computer
connecting camera, 51
connecting camera dock, 55
system requirements, 47
transferring pictures, 52, 59
by formatting, 45
during quickview, 17
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
last picture, 17
pictures, 30
viewing pictures on, 33
F
protected pictures, 31
digital pictures, using, 52
digital zoom, 19
display problems, 63
displaying pictures, 27
distance limits, close-up, 21
dock
favorites
icon, 27
FCC compliance, 89
file names, card, 86
fill flash, 18
printer, 52
dock insert
firmware
upgrading, 77, 83
version, 46
flash button, ii
flash, setting, 18
focus distance, close-up, 21
custom, 2
universal, 54
dock, camera. See camera dock
downloading
pictures, 52, 59
software/firmware, 83
folders, card, 85
formatting, memory/cards, 45
four-way arrow button, 5
E
EasyShare software,
G
installing, 49
guidelines, battery, 13
email icon, 27
emailing pictures, 39
error light, camera dock, 76
error messages, 69
exposure, adjusting, 23
external video device
setting video out, 44
H
help
software, 78
telephone support, 78
troubleshooting
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
internal memory
camera, 61—73
troubleshooting camera
dock, 74—76
change storage location, 10
format, 45
web links, 77
with computers, 77
K
I
Kodak software
icons
camera status, 8
capture menus, 20
picture information, 27
review menus, 28
setup menus, 41
share menus, 37
image storage menu, 10
information
about camera, 46
about pictures, 35
product support, 77
insert, for camera dock
custom, 54
installing, 49
transferring pictures, 52
Kodak web sites, 77
L
language, setting, 6
large print, this user guide, 1
LCD (Liquid Crystal Display)
display languages, 6
error messages, 69
picture location icon, 8
reviewing last picture, 17
status bar, 8
universal, 53, 54
installing
turning off quickview, 43
turning on liveview, 43
using as viewfinder, 16
viewing pictures, 29
lens
batteries, 4
battery pack, 56
insert, camera dock, 54
MMC/SD card, 9
software, 49
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
memory card
cleaning, 84
specifications, 82
inserting, 9
lens cap, 3
lights
camera dock, 60
storage capacities, 85
menu button, ii
menus
camera dock II, 58, 75—76
ready, camera, 15, 72
self timer, camera, i, 22
links, world wide web, 77
liveview
capture mode, 20
setup mode, 41
turning on, 43
using LCD as viewfinder, 16
loading
taking pictures, 20
MISC folder, card, 85
MMC/SD card
batteries, 4
battery pack, 56
insert, camera dock, 54
MMC/SD card, 9
file name conventions, 86
file structure, 85
formatting, 45
software, 49
inserting, 9
loop, slide show, 32
picture location, 10
printing from, 52
setting storage location, 10
storage capacities, 85
troubleshooting
problems, 68
M
Macintosh
installing software on, 49
system requirements, 47, 48
magnify picture, 30
maintenance, camera, 84
memory
mode indicator icon, 27
modes
camera, overview, 11
capture, 15, 20
review, 27
internal or card, 10
storage location setting, 10
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
setup, 41
file naming, 86
share, 37
monitor, requirements, 47
multi-up, viewing thumbnails, 29
printing, 52
N
NTSC, video out setting, 44
status info, 27
storage location, 10
tagging, 38, 39, 40
taking, 15
O
OK button, ii, 5
on/off switch, i, 5
orientation sensor, 26
overview
camera features, i—ii
camera modes, 11
transferring to
computer, 52, 59
using on computer, 52
viewing, 29, 33
P
package contents
camera, 2
power
camera dock, 53
PAL, video out setting, 44
picture information icons, 27
pictures
battery status, 8
camera dock, 55
optional AC adapter,
camera, 87
close-ups, 21
copying, 34
date imprint, 25
deleting, 30
downloading, 52, 59
e-mailing, tagged, 39
turning camera on, 5
power light, camera dock, 75
powerdown, automatic, 87
print icon, 27
print sizes, per quality setting, 24
printer dock, 52
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
requirements
printing
changing default quantity, 42
Mac OS, 47, 48
from a card, 52
optimizing printer, 77
pictures, 52
Windows OS-based, 47
resolution, setting, 24
return to previous menu, 42
review button, ii
review mode
tagged pictures, 38
this user guide, 1
without a computer, 52
protect icon, 27
menus, 28
protecting pictures, 31
reviewing pictures, 27
reviewing pictures
as you take them, 17
deleting, 30
Q
quality
print with digital zoom, 19
settings, 24, 85
quickview
magnifying, 30
deleting pictures, 17
reviewing last picture, 17
turning off, 43
on LCD, 29
picture information, 35
protecting, 31
slide show, 31
running slide show, 31
R
readme file, 61
ready light
S
status, 72
safety, 84
taking pictures, 15
red-eye, flash, 18
register your camera, web, 77
regulatory information, 89
removeable memory card, 9
batteries, 13
SD card, inserting, 9
self timer, 22
service and support, 78
setting
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
slide show
clock, 7
date and time, 7
flash, 18
language, 6
NTSC/PAL, 44
picture quality, 24
picture storage location, 10
resolution, 24
self timer, 22
video out, 44
software
help, 52, 78
specifications
camera, 81
setup mode
getting there, 41
Mac OS, 47, 48
overview, 11
Windows OS-based, 47
returning to previous, 42
using, 41
share button, ii
share mode
status, camera, 8
storage capacity, memory, 85
storage location, 10
strap, wrist, 3
email tagging, 39
getting there, 37
overview, 11
support, technical, 77—80
system folder, card, 85
system requirements
Mac OS, 47, 48
print tagging, 38
tagging favorites, 40
shutoff, auto, 87
shutter button
Windows OS-based, 47
T
tagging pictures
for email, 39
for favorites, 40
for print, 38
location, ii
problems, 62
self timer delay, 22
taking pictures, 15
sleep mode, 87
print quantity default, 42
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
share mode, 37
when and where, 37
taking pictures
capture mode, 15
changing options, 20—26
turning camera on and off, 5
close-up, 21
menus, 20
U
universal insert, 54
upgrading software,
URLs, Kodak web sites, 77
USB cable, connector, i, 51, 55
self timer, 22
setting quality, 24
using LCD as viewfinder, 16
telephone support, 78
television, viewing pictures, 33
thumbnails, viewing on LCD, 29
time, setting, 7
timer, shutter delay, 22
tips
V
video out, setting, 33, 44
viewfinder
lens, i
battery guidelines, 13
maintenance, 84
readme file, 61
safety, 84
taking pictures, 15
using LCD instead, 16
viewing
camera information, 46
picture information, 35
viewing picture
after taking, 17
magnified, 30
transfer light, camera dock, 75
transferring pictures to
computer, 52, 59
trash can, deleting, 17, 30
tripod, connecting, i, 59
troubleshooting problems
camera, 61—73
on an external device, 33
on LCD, 29
camera dock, 74—76
camera dock lights, 75—76
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
W
web links, 77
Windows
installing software, 49
system requirements, 47
wrist strap, attaching, 3
Z
zoom
button, ii, 5
optical, digital, 19
100
Download from Www.Somanuals.com. All Manuals Search And Download.
|