Kodak All in One Printer ESP 3200 Series User Manual

KODAK ESP 3200 Series  
All-in-One Printer  
M
S
S
D
/H  
C
M
M
C
Includes Information for the:  
ESP 3250 All-in-One Printer  
ESP 3260 All-in-One Printer  
Extended User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KODAK ESP 3200 Series All-in-One Printer  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Printer Overview  
This printer lets you print, copy, and scan pictures and documents.  
Components  
1
2
3
4
5
6
MS  
SD  
MM  
C
14  
13  
MS SD  
/HC
7
M
/H
12  
11  
10  
9
8
1
Memory card slot  
8
9
Printhead with ink cartridges installed  
Right paper-edge guide  
2
3
4
5
6
7
Control panel  
LCD  
10 Paper tray  
USB port  
11 Paper tray extender / paper stop  
12 Left paper-edge guide  
13 Scanner glass  
Power cord connection port  
Rear-access cleanout area  
Printer access door  
14 Scanner lid  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                   
Printer Overview  
Control panel  
ESP 3250  
1
All-in-One-Printer  
2
Home  
Back  
8
7
3
4
OK  
S
/HMMC  
Cancel  
Start  
6
5
Feature  
Description  
1
LCD  
Displays pictures, messages, and menus  
Turns the printer on or off  
2
3
4
5
6
On/Off button  
Home button  
Displays the main menu, and toggles between screens  
Navigation buttons Used to navigate menus, scroll through pictures  
Start button  
Begins copying, scanning, printing, maintenance task, and file transfer  
Cancel button  
Stops the current operation and returns to the menu; returns to previous item when  
navigating menus  
7
8
OK button  
Selects a menu item, accepts a zoom setting, and lets you continue with the current  
operation  
Back button  
Displays the previous screen  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
KODAK ESP 3200 Series All-in-One Printer  
Home Center Software  
KODAK Home Center Software is installed as part of the software installation on  
your computer. The Home Center icon will appear on your desktop. Use this icon to  
start Home Center Software.  
Home Center  
Software for  
WINDOWS  
OS-based  
On a WINDOWS OS-based computer, you can use Home Center Software to  
browse and edit pictures, print, copy, scan, order supplies, access the Extended User  
Guide, and configure your all-in-one printer from your computer. You can also  
access the KODAK Tips and Projects Center Web site or upgrade your printer with a  
newer version of software and/or firmware.  
computers  
Clicking one of the three icons located in the upper-right corner of Home Center  
Software does the following:  
Home - takes you to the main Home Center Software window from other functions  
within Home Center Software  
Tools - displays menu options, including links to Kodak sites, troubleshooting, and  
maintenance functions  
Help - displays a Help panel for Home Center Software  
Home Center  
Software for  
MACINTOSH  
Computers  
On a MACINTOSH Computer, Home Center Software has three panes: Select, Tools,  
and Maintenance. These panes let you do the following:  
Select pane — select your printer from a list of connected printers and check the  
printer ink levels.  
Tools pane — start a scan, select scanning settings, change Home Center Software  
settings, and restore all factory default settings.  
Maintenance pane — print a test page, align and clean the printhead, and initiate an  
upload of diagnostic data for service personnel.  
From any pane, you can order supplies from the KODAK Web site and view the  
status of your printer.  
From the File menu of Home Center Software, you can check for software updates.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
2
Configuring Your Printer  
This chapter presumes that you have set up your printer and that you may or may  
not have installed the printer software.  
Configuring printer settings  
Configuring basic NOTE: When you first power on the printer, the printer automatically steps you  
through the process of selecting the Language.  
printer settings  
To set or change basic printer settings:  
1. Press Home.  
2. Press  
3. Press  
to select Printer Settings, then press OK.  
to select one of the following settings:  
Date and Time*  
– Press OK, then press  
to select Year, Month, Day, Hour, or Minute.  
Press or to change the values; press OK when you are done.  
Tim e to Low Power  
– Press  
to change the time to energy-saving low power (select from 1 to 4  
hours in 0.5 hour increments). After the Time to Low Power, the printer  
goes into a low-power mode.  
Tagged Images Printing (see Printing tagged pictures, page 14)  
– Press  
to select On or Off.  
If you select On, when you are printing pictures, the printer LCD prompts  
you to verify that you want to print pictures that were tagged (or marked)  
using your camera. Different cameras use different terminology; KODAK  
Digital Cameras use “marked” images; others use either tagged images or  
DPOF.  
Language  
– Press OK, press  
to select a language, then press OK.  
Reset All Settings (see Resetting factory defaults, page 34)  
NOTE: Resetting factory defaults does not change the date and time, language, or  
country/region.  
4. Press Back.  
* You can also synchronize the printer's date and time to your computer from Home  
Center Settings under Tools in Home Center Software.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
KODAK ESP 3200 Series All-in-One Printer  
Setting your  
printer as the  
default printer  
If you have more than one printer, and after installation your all-in-one printer was  
not the default printer, you can make your all-in-one printer your default printer.  
For all computers and operating systems: If you haven’t yet installed the printer  
software, insert the software CD that came with your printer and follow the  
on-screen instructions to install the software.  
For WINDOWS XP OS-based computers  
1. Select Start > Control Panel > Printers and Faxes.  
2. Right-click your printer, and select Set as Default Printer.  
For WINDOWS VISTA OS-based computers  
1. Select Start > Control Panel > Hardware and Sound > Printers.  
2. Right-click your printer, and select Set as Default Printer.  
For WINDOWS 7 OS-based computers  
1. Select Start > Control Panel > Hardware and Sound > Devices and Printers.  
2. Right-click your printer, and select Set as Default Printer.  
For MACINTOSH Computers  
When a new printer is installed, it becomes the default printer. If your all-in-one  
printer is not the default printer:  
1. From the dock, open System Preferences.  
2. In the Hardware section, click Print & Fax.  
3. Select your printer from the drop-down list next to Default Printer.  
Connecting to another KODAK All-in-One Printer  
If you are connecting to a newer model printer (for example, you already have an  
ESP 7 printer and now you adding an ESP 3250 printer), you must install the  
software for the newer model.  
If you are connecting to another ESP 3250 printer or to an older model:  
• On a WINDOWS OS-based computer:  
a. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.  
b. If your all-in-one printer is not listed:  
• Select No, my printer is not listed, then click Next.  
• From the drop-down list, select your printer.  
• Select USB Cable - connect your cable now.  
• Connect the USB cable to the computer and printer.  
• Click Next.  
When your printer is detected, driver installation begins  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Configuring Your Printer  
c. If your all-in-one printer is listed:  
• Highlight the all-in-one printer that is connected to your network.  
• Select Yes, my printer is listed, then click Next.  
When your printer is detected, driver installation begins.  
d. When driver installation is complete, click Done.  
• On a MACINTOSH Computer:  
a. From the dock, open System Preferences.  
b. Click Print & Fax.  
c. Click the + sign to add the printer.  
d. Select the printer from the list of available printers, then click Add.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Handling Paper  
For the best photo printing results, use KODAK Photo Papers, which are optimized to  
work with KODAK All-in-One Printers.  
For the best document printing results, use KODAK Document Papers or a paper  
with the COLORLOK Technology logo on the package. Use only paper that is  
designed for inkjet printers.  
When handling paper:  
• Hold the paper by the edges; avoid placing your fingerprints on it.  
• Do not touch the glossy side of photo paper.  
• Store paper flat, away from direct sunlight and heat.  
Paper types  
Paper sizes  
You can use:  
• Plain paper — 20 to 24 lb / 75 to 90 gsm  
• Photo paper — up to 12 mil (290 gsm)  
• Card stock — 110 lb / 200 gsm, max  
• Envelopes — most standard types  
Transparencies — inkjet variety with white stripe  
• Labels — all inkjet varieties on 8.5 x 11-in. or A4 sheets  
• Iron-on transfers — all inkjet varieties on 8.5 x 11-in. or A4 sheets  
The printer accepts the following paper sizes:  
• 4 x 6 in. / 101 x 152 mm  
• 4 x 7 in. / 101 x 178 mm  
• 4 x 12 in. / 101 x 305 mm  
• 5 x 7 in. / 127 x 178 mm  
• 8 x 10 in. / 203 x 254 mm  
• 8.5 x 11 in. / 216 x 279 mm  
• 8.5 x 14 in. / 216 x 356 mm  
• A4 (8.27 x 11.69 in. / 210 x 297 mm)  
• A5 (5.83 x 8.27 in. / 148 x 210 mm)  
• A6 (4.13 x 5.83 in. / 105 x 148 mm)  
• B5 (6.93 x 9.48 in. / 176 x 250 mm)  
NOTE: Do not load paper smaller than 4 x 6 in. / 101 x 152 mm or A6.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Handling Paper  
Envelope sizes  
The printer accepts the following envelope sizes:  
• C5 (6.38 x 9 in. / 162 x 229 mm)  
• C6 (4.5 x 6.38 in. / 114 x 162 mm)  
• DL (4.31 x 8.69 in. / 110 x 220 mm)  
• US #7¾ (3.88 x 7.5 in. / 98 x 190 mm)  
• US #9 (3.88 x 8.88 in. / 98 x 225 mm)  
• US #10 (4.13 x 9.5 in. / 105 x 241 mm)  
IMPORTANT: Do not load envelopes with cutouts or with cellophane windows.  
Loading paper  
Loading plain  
paper  
The paper tray capacity is 100 sheets of plain paper.  
To load plain paper:  
1. Open the paper tray.  
M
/HC MC  
2. Pull out the paper tray extender until it is fully extended.  
3. Lift the paper stop.  
4. Make sure the left paper-edge guide is to the far left.  
left paper-edge guide  
MS SD  
MC  
paper stop  
paper tray extender  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
KODAK ESP 3200 Series All-in-One Printer  
5. Carefully fan and stack the paper, then insert it into the tray.  
6. Move the paper forward until it stops.  
7. Move the left paper-edge guide until it touches the paper.  
left paper-edge guide  
M
SD/  
H
C  
Loading photo  
paper  
The paper tray capacity is 20 sheets of photo paper.  
To load photo paper:  
1. Remove any paper from the tray.  
2. Carefully fan and stack the photo paper, then insert the paper (short side first)  
into the tray with the logo side facing up.  
3. Move the paper forward until it stops.  
4. Move the left paper-edge guide until it touches the paper.  
left paper-edge guide  
MS
C MMC  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Handling Paper  
Loading  
envelopes  
The paper tray capacity is 20 envelopes.  
To load envelopes:  
1. Remove any paper from the tray.  
2. Insert the envelope(s) into the tray with the flap up and against the right side of  
the tray.  
3. Move the left paper-edge guide until it touches the envelope(s).  
left paper-edge guide  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4
Printing Pictures  
The quickest way to print pictures is from a memory card inserted into the printer.  
Another way to print pictures is to use Home Center Software on your computer  
running the WINDOWS Operating System. Home Center Software lets you edit and  
enhance your pictures on your computer before printing. Open Home Center  
Software, select Print Pictures, then follow the on-screen instructions.  
If you have a MACINTOSH Computer, print your pictures using KODAK  
EASYSHARE Software, iPhoto, or another picture-editing program.  
Changing Print Photos Options / Defaults  
You can change the print photos options for an individual picture or group of  
pictures, or you can change the settings and save them as the default.  
To change print photos options:  
1. Press Home.  
2. If necessary, press  
to select View and Print Photos, then press OK.  
3. Press or as needed to change the settings below.  
Print Photos Option  
Settings  
Description  
View Photos  
--  
--  
Scroll through the pictures on the  
memory card.  
Transfer All to PC  
To transfer all the pictures on the  
memory card to your computer, press  
OK then Start. (Your printer and  
computer must be connected with a USB  
cable.)  
Quantity  
Print Size  
1 (default) to 99  
The number of copies that print.  
2 x 3  
If the selected copy size is smaller than  
the paper in the paper tray, the printer  
automatically arranges the pictures to  
best fit the paper size.  
3.5 x 5  
4 x 6 (default)  
4 x 7  
5 x 7  
4 x 12  
8 x 10  
8.5 x 11 or A4  
Plain Paper Quality  
Normal (default)  
Good quality output; prints faster than  
Best.  
Best  
The highest quality.  
Draft  
The fastest print speed.  
Photo Paper Quality Automatic  
(default)  
The printer detects when you load photo  
paper and sets Best quality  
automatically.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Printing Pictures  
Print Photos Option  
Settings  
Color (default)  
Black & White  
Description  
Prints full color.  
Color  
Prints black and white (gray scale).  
Scene Balance  
On (default)  
Off  
Adjusts the image brightness to correct  
for underexposure and reduces the  
variation in contrast in different areas of  
the picture.  
Add Date to Prints  
Save as Defaults  
No (default)  
Yes  
Prints the date of the picture(s) (the date  
the picture was taken or last edited) in a  
corner of the print.  
No (default)  
Yes  
To save settings as the new default, press  
OK, select Yes, then press OK.  
Printing pictures from a memory card  
Types of memory Your printer accepts the following memory cards:  
cards  
• SD Card  
• SDHC Card  
• MMC Card  
• Memory Stick  
• Variations of the memory cards listed above that require an adapter (for  
example, MEMORY STICK Duo, miniSD, and microSD)  
IMPORTANT: If you use a memory card with an adapter, make sure you insert and remove  
the adapter and the memory card as a unit; do not remove the memory card  
while leaving the adapter in the printer.  
Printing a picture If you use the default settings, one 4 x 6 in. /101 x 152 mm picture is printed.  
using the default  
settings  
To print a picture:  
1. Load photo paper with the logo side facing up (see Loading photo paper,  
page 9), and move the left paper-edge guide until it touches the paper.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
KODAK ESP 3200 Series All-in-One Printer  
2. Insert the memory card into the memory card slot.  
M
SD  
/H  
C
MM  
C
memory card slot  
left paper-edge guide  
3. Press or to display the picture you want to print.  
4. Press Start to begin printing.  
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the  
printer while printing.  
Printing pictures To print pictures with options other than the default settings (such as a different  
print size, black-and-white instead of color, or a date on the print):  
using non-default  
photo options  
1. Load photo paper with the logo side facing up (see Loading photo paper,  
page 9), and move the left paper-edge guide until it touches the paper.  
MS S
/HC MM
memory card slot  
left paper-edge guide  
2. Press Back.  
3. If necessary, use the navigation buttons to select View and Print Photos.  
4. Press OK.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Printing Pictures  
5. Press  
to select the option you want to change (for example, Quantity, Print  
Size, Color, Scene Balance, or Add Date to Print).  
6. Press  
to change the selection.  
7. Repeat steps 5 and 6 for each option you want to change.  
8. When you are done changing options, press  
to select View Photos, then  
press OK.  
9. Insert the memory card into the memory card slot.  
10. Press or to select the picture you want to print, then press OK. A check  
mark on the LCD indicates the picture is selected.  
NOTE: To deselect the picture, press OK again.  
11. To select additional pictures, press or until the picture is displayed, then  
press OK.  
12. When you are done selecting pictures, press Start to begin printing.  
IMPORTANT: To prevent loss of data from your memory card, do not remove it from the  
printer while printing.  
Printing tagged  
pictures  
Some digital cameras let you tag (or “mark”) pictures on the memory card for  
printing. This creates a tag that is recognized by the printer. If you choose to print  
tagged pictures, they will be printed according to the default settings on your printer  
(unless otherwise specified by the tag from the camera).  
NOTE: Refer to your camera user guide to determine whether your camera supports  
tagged (also “marked” or “DPOF”) functionality.  
To print tagged pictures:  
1. Load photo paper with the logo side facing up (see Loading photo paper,  
page 9), and move the left paper-edge guide until it touches the paper.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
KODAK ESP 3200 Series All-in-One Printer  
2. Insert the memory card into the memory card slot.  
M
SD  
/H  
C
MM  
C
memory card slot  
left paper-edge guide  
3. When the “Print tagged images?” message appears, press Start.  
Printing  
panoramic  
pictures  
To print a panoramic picture, load 4 x 12 in. / 101 x 305 mm paper, or US letter or A4  
paper.  
Transferring pictures to a computer  
You can transfer .jpg, .mov, and .wav files from a memory card in the printer to your  
computer. To transfer these files, the printer must be connected to your computer  
with a USB cable.  
NOTE: If you have large video files or a large number of pictures (400 or more), we  
recommend that you use a memory card reader attached directly to your  
computer to transfer them.  
Transferring  
pictures to a  
WINDOWS  
OS-based  
1. Insert the memory card into the memory card slot on the printer.  
2. Press Back.  
3. If necessary, use the navigation buttons to select View and Print Photos.  
4. Press OK.  
computer  
5. Press  
to select Transfer All to PC, then press OK.  
6. Press Start.  
7. Follow the on-screen instructions on your computer.  
Transferring  
pictures to a  
MACINTOSH  
Computer  
1. Insert the memory card into the memory card slot on the printer.  
2. Press Back.  
3. If necessary, use the navigation buttons to select View and Print Photos.  
4. Press OK.  
5. Press  
to select Transfer All to PC, then press OK.  
6. Press Start.  
7. Use iPhoto or Image Capture on your computer to complete the transfer.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
5
Copying  
You can copy documents and pictures with your all-in-one printer. The printer  
produces high–quality color or black-and-white copies on a variety of paper types  
Making a copy  
To copy a document or a picture using the default settings:  
1. Lift the scanner lid, and place the document or picture face down on the glass.  
MS  
HC  
MMC  
2. Close the lid.  
NOTE: Single-button document copy is a feature that lets you put paper on the  
scanner and immediately press Start, without following the remaining steps  
below. You can use this feature when the printer has been idle or when it is  
turned on; the printer automatically goes to Copy Document mode.  
3. Press Home.  
4. If needed, press  
or  
to select Copy Document or Copy Photo.  
5. Press Start to begin copying.  
Changing copy options  
You can change the copy options for an individual copy, or you can change the  
settings for copying documents or copying photos, and save them as the defaults.  
Changing copy  
To change the copy document options:  
documentoptions  
1. Press Home.  
2. If necessary, press  
to select Copy Document.  
3. Press OK.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
KODAK ESP 3200 Series All-in-One Printer  
4. Press  
to go through the options, and press or as needed to change the  
settings below:  
Copy Document Option  
Settings  
Description  
Quantity  
1 (default) to 99  
The number of copies that print.  
Copy Size  
Same Size  
(default)  
The copy is the same size as the  
original.  
Fit to Page  
The printer detects the size of the  
original on the scanner glass and the  
size of the paper in the paper tray, and  
automatically reduces or enlarges the  
original so that the copy fits on the  
paper.  
20% to 500%  
Reduces up to 20% or enlarges up to  
500% of the original size.  
Plain Paper Quality  
Normal  
(default)  
Good quality output; prints faster than  
Best.  
Best  
The highest quality, but the slowest  
print speed; eliminates the banding  
effect that sometimes occurs when  
printing Draft or Normal.  
Draft  
The fastest print speed, but the lowest  
quality.  
Photo Paper Quality  
Color  
Automatic  
(default)  
The printer detects when you load  
photo paper and sets Best quality  
automatically.  
Color  
Prints full color.  
(default)  
Black & White  
Prints black and white (gray scale).  
Brightness  
-3 to +3  
(0 is default)  
Lightens or darkens the copy.  
0 (Normal) is no change from the  
original; -3 is the darkest; +3 is the  
lightest.  
Save as Defaults  
No / Yes  
To save settings as the new default:  
press OK, select Yes, then press OK.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copying  
Changing copy  
photo options  
To change the copy photo options:  
1. Press Home.  
2. If necessary, press  
to select Copy Photo.  
3. Press OK.  
4. Press  
below:  
to view the options, and press or as needed to change the settings  
Copy Photo Option  
Quantity  
Settings  
Description  
1 (default) to 99  
The number of copies that print.  
Copy Size  
2 x 3  
If the selected copy size is smaller  
than the paper in the paper tray, the  
printer automatically arranges the  
pictures to best fit the paper size.  
3.5 x 5  
4 x 6 (default)  
4 x 7  
5 x 7  
4 x 12  
8 x 10  
8.5 x 11 or A4  
Plain Paper Quality  
Normal  
(default)  
Good quality output; prints faster  
than Best.  
Best  
The highest quality.  
Draft  
The fastest print speed.  
Photo Paper Quality  
Color  
Automatic  
(default)  
The printer detects when you load  
photo paper and sets Best quality  
automatically.  
Color  
Prints full color.  
(default)  
Black & White  
Prints black and white (gray scale).  
Brightness  
-3 to +3  
(0 is default)  
Lightens or darkens the copy.  
0 (Normal) is no change from the  
original; -3 is the darkest; +3 is the  
lightest.  
Save as Defaults  
No / Yes  
To save settings as the new default:  
press OK, select Yes, then press  
OK.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
KODAK ESP 3200 Series All-in-One Printer  
Adjusting copy settings  
You can change the copy settings for individual copy tasks. A few of the common  
tasks are described below.  
Enlarging or  
reducing a  
document  
To enlarge or reduce the size of your copy:  
1. Lift the scanner lid, and place the document face down on the glass.  
Note the orientation of the paper on the glass and make sure the paper is flush  
to the edges.  
M
D
/H
2. Close the lid.  
3. Press Home.  
4. If needed, press  
or  
to select Copy Document.  
5. Press OK.  
6. Press  
7. Press  
to select Copy Size.  
or to select the enlargement or reduction you want.  
NOTE: If you select Fit to Page, the printer detects the size of the original on the  
scanner glass and the size of the paper in the paper tray, and automatically  
reduces or enlarges the original so that the copy fits on the paper  
8. Press Start to begin copying.  
Enlarging or  
To enlarge or reduce the size of your copy:  
reducing a photo  
1. Lift the scanner lid, and place the photo face down on the glass.  
2. Close the lid.  
3. Press Home.  
4. If needed, press  
or  
to select Copy Photo.  
5. Press OK.  
6. Press  
to select Copy Size.  
7. Press or to select the photo size you want.  
8. Press Start to begin copying.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Copying  
Darkening or  
lightening copies  
If the original document or picture is too light or too dark, you can make the copy  
darker or lighter.  
To darken or lighten the copy:  
1. Lift the scanner lid, and place the document face down on the glass.  
MS  
HC  
MMC  
2. Close the lid.  
3. Press Home.  
4. If needed, press  
5. Press OK.  
or  
to select Copy Document or Copy Photo.  
6. Press  
to select Brightness.  
7. Press  
to select a number below zero for a darker copy, or press  
to select a  
number above zero for a lighter copy.  
8. Press Start to begin copying.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
6
Scanning  
Scanning converts the text and images from the documents and pictures that you  
place on the scanner glass into electronic data, and then sends the data to your  
computer. To scan with your all-in-one printer, it must be connected to a computer  
with a USB cable.  
You save the scanned file(s) to your computer; you cannot save to a memory card in  
the printer.  
Before you begin scanning  
Change the default scan settings in the Home Center Software. (Click the Tool icon,  
then select Printer Scan Settings.)You can adjust the following settings for scanned  
pictures and documents:  
• Color / black-and-white / gray scale  
• Resolution (dpi)  
• File format (.pdf, .rtf, .tif, .jpg for documents; .jpg, .bmp, .tif for pictures)  
• Base name (by default, scanned files are named “scan1”, “scan2”, etc)  
• Location (folder) where the scanned files will be saved  
Before saving a scanned file, you can preview it in Home Center Software, and crop  
the output as desired. See the Home Center Software Help (? icon) for instructions.  
Simple scanning  
To scan a single document or picture:  
1. Lift the scanner lid, and place the document or picture face down on the glass.  
MD  
/HC MMC  
2. Close the lid.  
3. Open Home Center Software, then:  
• On a WINDOWS OS-based computer, select Scan Pictures and Documents,  
then follow the on-screen instructions.  
• On a MACINTOSH Computer, select Tools > Scan Application, then follow  
the on-screen instructions.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Scanning  
Scanning multiple pictures simultaneously  
Using Home Center Software, you can scan multiple pictures simultaneously and  
save them as separate files.  
NOTE: For Home Center Software to interpret two or more pictures, the scan option  
must be set to Picture.  
When scanning multiple pictures, leave space between the pictures so that the  
printer can detect the separate pictures. Any pictures that overlap are interpreted as  
a single picture.  
Scanningmultiple To scan multiple pictures simultaneously and save them as separate files:  
pictures with a  
WINDOWS  
OS-based  
1. Lift the scanner lid, and place the pictures face down on the glass leaving space  
between the pictures.  
2. Close the lid.  
computer  
3. Open Home Center Software, then select Scan Pictures and Documents.  
4. Open the Tools panel, if it is not open, by clicking the Tools icon.  
5. Click Printer Scan Settings.  
6. Select the Picture tab.  
7. Select Automatically Detect Pictures, if it is not selected, then click OK.  
8. Make sure Picture is selected, then follow the on-screen instructions.  
NOTE: Click the Help icon for additional instructions.  
Scanningmultiple To scan multiple pictures simultaneously and save them as separate files:  
pictures with a  
MACINTOSH  
Computer  
1. Lift the scanner lid, and place the pictures face down on the glass leaving space  
between the pictures.  
2. Close the lid.  
3. Open Home Center Software, then select the Tools tab.  
4. Select Color Picture or Black and White Picture.  
5. Click the Scan Application button.  
6. Select Automatically detect multiple pictures, if it is not selected.  
7. Click Preview or Scan All, and follow the on-screen instructions.  
NOTE: Click the Help icon for additional instructions.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
7
Maintaining Your Printer  
Your printer requires little maintenance. However, Kodak recommends cleaning the  
scanner glass and lid regularly to remove dust and fingerprints, which affect the  
quality and accuracy of scanning.  
Except for cleaning the printer, keep the printer plugged in with AC power turned on.  
If you use a power strip, don't turn off the power strip.  
Keep the printhead and ink cartridges in the printer at all times. This helps prevent  
damage to the printhead.  
Service agreements are available in some countries. Contact dealers of KODAK  
Products for more information.  
For recycling and/or disposal information, contact your local authorities. In the US,  
go to the Electronics Industry Alliance at www.eia.org or go to  
General care and cleaning  
CAUTION:  
Always disconnect the power to the printer before cleaning it. Do not use  
harsh or abrasive cleaners or organic solvents on the printer or any of its  
parts.  
To clean the printer, wipe the outside with a clean, dry cloth.  
• Keep the surrounding area vacuumed and litter-free.  
• Protect the printer from tobacco smoke, dust, sand, other small particles (such  
as crumbs), and liquid spills.  
• Do not place objects on the printer.  
• Keep the printer supplies away from direct sunlight and out of high-temperature  
environments.  
• Do not allow chemicals, such as suntan lotion, to come into contact with the  
painted surface of the printer.  
• If the printer has been exposed to bad weather or has water inside it, turn it off  
and let it dry completely. If this does not solve the problem, contact Kodak  
Service & Support.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Maintaining Your Printer  
Cleaning the  
scanner glass  
For good quality copies and scans, ensure the printer's scanner glass and lid backing  
are clean; dust the exterior as needed.  
CAUTION:  
Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass,  
as these chemicals may damage it. Do not pour or spray liquid directly on the  
glass; the liquid might seep under the glass and damage the printer.  
To clean the scanner glass:  
1. Unplug the printer and raise the scanner lid.  
MS  
/
M
M
C
2. Wipe the glass with a soft cloth or sponge, slightly moistened with a  
nonabrasive glass cleaner.  
3. Dry the glass with a lint-free cloth.  
4. When finished cleaning, plug in the printer.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
KODAK ESP 3200 Series All-in-One Printer  
Cleaning inside  
the scanner lid  
Minor debris can accumulate on the white document backing located under the  
scanner lid.  
CAUTION:  
Do not use paper-based wipes, as they can scratch the underside of the  
scanner lid. Do not use harsh or abrasive cleaners or organic solvents on the  
printer or any of its parts.  
To clean the white document backing under the scanner lid:  
1. Unplug the printer and raise the scanner lid.  
M
SD  
/HC  
2. Gently clean the underside of the lid with a soft cloth or sponge, slightly  
moistened with a mild soap and warm water.  
3. Dry the underside with a chamois or soft cloth.  
4. If the white document backing needs further cleaning, use isopropyl (rubbing)  
alcohol on a soft cloth, then wipe thoroughly with a cloth damped with water to  
remove any residual alcohol.  
5. When finished cleaning, plug in the printer.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintaining Your Printer  
Replacing ink cartridges  
Your printer uses both black and color ink cartridges. You can check the approximate  
ink levels on the LCD (see Checking ink levels, page 34) or in Home Center Software.  
When an ink cartridge is out of ink, the printer LCD displays a message stating that  
the black or color ink cartridge needs replacing.  
IMPORTANT: Do not use non-Kodak brand or refilled ink cartridges.  
To replace an ink cartridge:  
1. Make sure your printer is on.  
2. Lift the printer access door, and wait for the carriage to move to the access  
position.  
The black and color ink cartridges are located in the printhead.  
printhead  
color ink cartridge  
black ink cartridge  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
KODAK ESP 3200 Series All-in-One Printer  
3. Pinch the latch on the ink cartridge and lift it out of the printhead.  
4. Remove the ink cartridge from its bag.  
IMPORTANT: Insert the ink cartridge into the printhead immediately to prevent the  
printhead from drying out.  
5. Remove the protective cap from the cartridge.  
1 0  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintaining Your Printer  
6. Insert the ink cartridge into the printhead.  
7. Press down on the tab until you hear a click.  
8. Close the printer access door.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KODAK ESP 3200 Series All-in-One Printer  
Replacing the printhead  
IMPORTANT: Replacing the printhead is not a regular maintenance procedure. Replace  
the printhead only if you receive a new printhead from Kodak.  
To replace the printhead:  
1. Make sure your printer is on.  
2. Lift the printer access door, and wait for the carriage to move to the access  
position.  
3. Remove any paper that may be loaded in the printer.  
4. Remove both ink cartridges and set them aside.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Maintaining Your Printer  
5. Unlatch the used printhead by lifting the button in the center of the carriage.  
6. Lift the used printhead out of the carriage.  
7. Remove the new printhead from its bag.  
CAUTION:  
Do not touch the copper contacts on the printhead, as this may damage it.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
KODAK ESP 3200 Series All-in-One Printer  
8. Remove the two plastic protective shields.  
9. Place the new printhead into the carriage. Insert it at the angle shown.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintaining Your Printer  
10. Push firmly against the target label of the printhead until you hear a loud snap.  
11. Insert the black ink cartridge into the printhead.  
12. Press down on the ink cartridge until you hear it click into position.  
Car  
t
ouchd'encr  
e
no
e
10  
10  
13. Repeats steps 11 - 12 for the color ink cartridge.  
14. Close the printer access door.  
The printer detects the new printhead. Follow the instructions on the LCD to  
calibrate your printer.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KODAK ESP 3200 Series All-in-One Printer  
Upgrading the printer software and firmware  
Using the latest software and firmware helps ensure optimal performance of your  
printer.  
When you upgrade to the latest version of Home Center Software, it comes with the  
latest drivers, which are programmed links between the computer and printer. The  
drivers allow communication between the printer, scanner, and computer.  
Firmware is data or programs that are written to the memory and control  
functionality of your printer.  
When you open Home Center Software, the software automatically checks for  
software and firmware updates (firmware updates on WINDOWS OS-based  
computers only). Use these procedure when you want to upgrade manually.  
NOTE: Your printer must be connected to the computer with a USB cable to  
upgrade firmware.  
Upgrading  
software and  
firmware on a  
WINDOWS  
OS-based  
To upgrade the software and firmware:  
1. Make sure that your computer is connected to the Internet.  
2. Connect the printer to the computer with a USB cable (if not currently  
connected).  
3. Open Home Center Software.  
computer  
4. Click the Tools icon to open the side navigation pane.  
5. Under Web Links, click Software Updates to check whether software updates  
are available.  
6. If there are updates, click Next and follow the on-screen instructions.  
7. Under Web Links, click Firmware Updates to check whether firmware updates  
are available.  
8. If there are updates, click Next and follow the on-screen instructions.  
Upgrading  
To upgrade the software:  
software and  
firmware on a  
MACINTOSH  
Computer  
1. Make sure that your computer is connected to the Internet.  
2. Open Home Center Software.  
3. On the File menu, select Check for Updates.  
4. If there are software updates, follow the on-screen instructions for upgrading  
your software.  
To upgrade the firmware:  
2. Connect the printer to the computer with a USB cable (if not currently  
connected).  
3. Select your operating system from the drop-down list.  
4. Click Select in the Firmware box.  
5. Read the instructions, click Download, then follow the on-screen instructions.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Maintaining Your Printer  
Monitoring and adjusting printer performance  
From the control panel, you can perform many tasks to help you keep the printer  
functioning well.  
Checking ink  
levels  
To check the ink levels:  
1. Press Home.  
2. Press  
to select Maintenance.  
3. With Check Ink Levels selected, press OK.  
The LCD shows approximate levels of ink in the cartridges so you know when it’s  
time to order replacement cartridges.  
Resetting factory To reset all defaults to the factory default settings:  
defaults  
1. Press Home.  
2. Press  
3. Press  
to select Printer Settings.  
to select Reset All Settings, then press OK.  
4. When you see the message, “This will reset printer settings to factory defaults,”  
press OK.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
8
Troubleshooting  
Basic troubleshooting  
Some problems can be resolved quickly by power cycling the printer: Turn off your  
printer. Wait five seconds. Turn on the printer.  
Use the following information to help troubleshoot problems with your printer.  
For more troubleshooting information, go to:  
www.kodak.com/go/itg to use our Step-by-Step Solutions and Repair tool for  
help with problems such as paper jams and image quality.  
www.kodak.com/go/esp3250support for FAQs and links to other support for  
your printer.  
www.kodak.com/go/esp3250downloads to download the latest software and  
firmware files.  
www.kodak.com/go/esp3250specs for the recommended system requirements.  
Problem  
Possible Solutions  
Printer does not power on  
• Make sure you are using the power cord that came with your printer.  
• Make sure the power cord is connected to the AC adapter and is plugged  
into an outlet or power strip.  
• If the USB 2.0 cable was disconnected from the printer, then reconnected, or  
if power to the printer was interrupted, restart the computer.  
Printer not detected  
• Make sure your printer is plugged in and turned on.  
• Make sure:  
you have a USB 2.0 cable.  
that the USB cable is connected to both your printer and your computer.  
Printhead carriage jam  
Image quality problems  
• Open the printer access door and clear any obstructions.  
• Check that the printhead and ink cartridges are installed correctly.  
(The printhead and ink cartridges are installed correctly when you hear  
them click into place.)  
• For best results, use KODAK Paper or a paper with the COLORLOK  
Technology logo on the package.  
• Make sure the paper is loaded correctly. See Loading paper, page 8  
5. For more help, go to www.kodak.com/go/itg, select All-in-one printer,  
then Print Quality (missing colors, blank prints, etc).  
Ink cartridge problems  
• Check that KODAK Ink Cartridge(s) are installed. Do not use non-Kodak  
brand or refilled ink cartridges.  
• Remove, then install the cartridges again. Make sure the cartridges click into  
place.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Troubleshooting  
Problem  
Possible Solutions  
Paper jam  
• Check for paper in the rear-access cleanout area.  
• Open the printer access door and gently remove any paper from inside the  
printer.  
• Make sure the paper in the tray is free of tears or creases.  
• Make sure you do not overload the paper tray.  
For more information, see www.kodak.com/go/itg. Select All-in-one printer,  
then Paper jam.  
Error messages or other  
problems you cannot  
resolve  
If you need to contact Kodak (see www.kodak.com/go/contact), have the  
following information available:  
• Kodak Service Number (located inside or on the outside of the printer)  
• Printer mode number (located on the back of the printer)  
• Computer model, operating system, and version of Home Center Software  
• Exact wording of any error message(s)  
For more troubleshooting information, go to www.kodak.com/go/esp3250support.  
The status light indicates the condition of the printer.  
Status light  
Power status light  
Power light  
What it means  
Off  
• The printer is turned off.  
– Press the on/off button to turn on power.  
• The printer does not have power.  
– Make sure that the power cord is plugged into the back of the printer and  
into an electrical outlet, and that the electrical outlet has power.  
Blinking  
On  
• The printer is busy.  
– Wait for the printer to finish the task.  
• The printer is ready  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
9
Product and Safety Specifications  
Specifications for this KODAK ESP 3200 Series All-in-One Printer are described in  
the tables below.  
Specifications and features  
Print performance  
Print Performance  
Black Print Speed  
Color Print Speed  
Print Technology  
Print Quality Modes  
Up to 30 pages per minute on plain paper  
Up to 29 pages per minute on plain paper  
Continuous-tone, thermal inkjet  
Draft, Normal, and Best on plain paper  
Photo quality mode on photo paper  
Photo printing features  
Photo Printing Features  
Quantity  
Up to 99  
(may vary for different models of the 3200 series printers)  
Print Sizes  
2 x 3 in. (5 x 7.6 cm)  
3.5 x 5 in. (9 x 12.7 cm)  
4 x 6 in. (10 x 15 cm)  
4 x 7 in. (10 x 18 cm)  
(Panoramic) 4 x 12 in. (10 x 30 cm)  
5 x 7 in. (13 x 18 cm)  
8 x 10 in. (20 x 25 cm)  
US Letter - 8.5 x 11 in. (22 x 28 cm)  
A4 (21 x 30 cm)  
Quality  
Best, Normal, Draft  
Auto-detect Media  
Auto-detect plain paper, photo paper, and transparency  
Optimize image quality for KODAK Photo Papers with barcode  
Image Enhancement  
KODAK PERFECT TOUCH Technology with  
Home Center Software  
Add Dates to Prints  
Color  
Yes, No  
Color, Black-and-white  
On, Off  
Scene Balance  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Product and Safety Specifications  
Copy document features  
Copy Document Features  
Color  
Black-and-white or color  
Quantity  
1 to 99 copies  
(may vary for different models of the 3200 series printers)  
Copy Sizes  
Same Size, Fit-to-Page, 20% to 500%  
(may vary for different models of the 3200 series printers)  
Plain Paper Quality  
Brightness  
Best, Normal, Draft  
– 3 to + 3  
Copy photo features  
Copy Photo Features  
Color  
Black-and-white or color  
Quantity  
1 to 99 copies  
(may vary for different models of the 3200 series printers)  
Copy Sizes  
2 x 3 in. (5 x 7.6 cm)  
3.5 x 5 in. (9 x 12.7 cm)  
4 x 6 in. (10 x 15 cm)  
4 x 7 in. (10 x 18 cm)  
(Panoramic) 4 x 12 in. (10 x 30 cm)  
5 x 7 in. (13 x 18 cm)  
8 x 10 in. (20 x 25 cm)  
US Letter - 8.5 x 11 in. (22 x 28 cm)  
A4 (21 x 30 cm)  
Quality  
Automatic  
– 3 to + 3  
Brightness  
Scanning features  
Scanning Features  
Contact Image Sensor (CIS)  
8.5 x 11.7 in. (21.6 x 29.7 cm)  
Scanner Type  
Maximum Scan Size  
Functions  
Segmentation scanning  
Auto-destination  
OCR  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
KODAK ESP 3200 Series All-in-One Printer  
Paper tray features  
Paper Tray Features  
Paper Capacity  
100 sheets of 20 lb plain paper  
20 sheets of photo paper, up to 12 mil (290 gsm)  
20 envelopes  
Tray Size  
4 x 6 in. to 8.5 x 14 in. (10 x 15 cm to 21.6 x 36 cm)  
Ink cartridges  
Connectivity  
Ink Cartridges  
Ink Handling  
Ink Life  
2-cartridge, 6-ink system  
1-year warranty from date of purchase  
Connectivity  
Protocols Supported  
Devices Supported  
USB 2.0, DPOF, MIPC  
WINDOWS OS-based and MACINTOSH Computers, memory  
cards (SD, MS/Duo, MMC, SDHC)  
Image Formats Supported Image printing supports JPEG (EXIF v2.2); does not support  
progressive JPEG format  
Number of USB Ports  
Protocols Supported  
One rear device port (high speed)  
USB 2.0, DPOF (Tagged image printing), MIPC  
Software support  
Software Support  
Application Support  
KODAK EASYSHARE Software for photos or third-party image  
management applications; optical character reader (OCR)  
support for documents  
Media Support  
Scanner Support  
Update Support  
Plain paper, photo paper, envelopes, greeting cards,  
transparencies with white stripe, labels  
TWAIN and WIA, WIA2 (VISTA OS) import, including  
EASYSHARE Software, segmentation scanning  
Software and firmware updates available through Web support  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Product and Safety Specifications  
Physical specifications  
Physical Specifications  
Power  
US: 110–120 V AC, 50–60 Hz at 2 A  
WW: 110-240 V AC, 50-60 Hz at 2 A  
Output: 36 V DC at 1.6 A  
Dimensions  
Weight  
422 x 98 x 181 mm [L × H x D]  
(16.6. x 11.7. x 7.1 in.)  
5.6 kg (12.3 lb)  
Operating Range  
5°C (41°F) to 35°C (95°F), 15 to 85% RH  
(non-condensing and atmospheric pressure to approximately  
10,000 ft ASL)  
Full image Quality  
Environmental Range  
15°C (59°F) to 30°C (86°F), and 20 to 80% RH.  
ENERGY STAR® Qualified  
Warranty  
Warranty  
Product  
One year from purchase (with proof of purchase)  
One year from purchase (with proof of purchase)  
Printhead  
System requirements  
The following specifications are subject to change without notice.  
WINDOWS OS-based computer  
WINDOWS OS-Based  
Minimum  
Recommended  
Computer  
Operating System  
MICROSOFT WINDOWS  
XP SP2 OS  
MICROSOFT WINDOWS  
VISTA OS  
CPU  
Celeron  
32- or 64-bit processor  
2 GHz  
Clock Speed  
Memory  
1.2 GHz  
512 MB RAM  
500 MB available  
USB 2.0  
1024 MB RAM  
500 MB available  
USB 2.0  
Available Disk Space  
Interface  
Removable Drive  
Other  
CD-ROM  
CD-ROM  
Internet access capability  
Internet access capability  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
KODAK ESP 3200 Series All-in-One Printer  
MACINTOSH Computers  
MACINTOSH  
Minimum  
Recommended  
Computers  
Operating System  
CPU  
MACINTOSH OS X 10.4.8  
OS X 10.4.8 or later  
PowerPC G4, G5, or Intel Based  
Mac  
Intel Based Mac  
Clock Speed  
Memory  
1.2 GHz  
2 GHz  
512 MB RAM  
1024 MB RAM  
200 MB available  
USB 2.0 High Speed  
CD-ROM  
Available Disk Space  
Interface  
200 MB available  
USB 2.0 Full Speed  
CD-ROM  
Removable Drive  
Other  
Internet access capability  
Internet access capability  
Paper types supported  
Paper Types Supported  
20 to 24 lb (60 to 90 gsm)  
Up to 12 mil (290 gsm)  
Plain Paper  
Photo Paper  
Card Stock  
Envelopes  
Transparencies  
Labels  
110 lb index max (200 gsm)  
20 to 24 lb (75 to 90 gsm)  
All commercially available inkjet varieties (with a white stripe)  
All commercially available inkjet varieties on 8.5 x 11 in. and A4  
size sheets  
Iron-on Transfers  
All commercially available inkjet varieties on 8.5 x 11 in. and A4  
size sheets  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Product and Safety Specifications  
Paper sizes supported  
Paper Sizes Supported  
Usage  
Size  
Document Page Sizes  
A4 (210 x 297 mm)  
Labels  
A5 (148 x 210 mm)  
A6 (105 x 148 mm)  
B5 (176 x 250 mm)  
US Executive (7.25 x 10.5 in.) (184 x 266 mm)  
US Letter (8.5 x 11 in.) (216 x 280 mm)  
US Legal (8.5 x 14 in.) (216 x 356 mm)  
Custom sizes from 4–8.5 in. wide and 6–14 in. long  
Index Card Stock  
4 x 6 in. index cards (101 x 152 mm)  
5 x 7 in. index cards (127 x 178 mm)  
Transparency  
A4 (210 x 297 mm)  
Iron-on Transfer  
US Letter (8.5 x 11 in.) (216 x 280 mm)  
Label Sizes  
C5 (6.38 x 9 in.) (162 x 299 mm)  
C6 (4.49 x 6.38 in.) (114 x 162 mm)  
A2 (4.37 x 5.75 in.) (111 x 146 mm)  
DL (designated long) (4.33 x 8.66 in.) (110 x 220 mm)  
US #10 (4.12 x 9.5 in) (105 x 241 mm)  
Photo  
4 x 6 in. (102 x 152 mm)  
4 x 7 in. (102 x 178 mm)  
4 x 12 in. (102 x 305 mm)  
5 x 7 in. (127 x 178 mm)  
8 x 10 in. (203 x 254 mm)  
US Letter (8.5 x 11 in.) (216 x 280 mm)  
A4 (210 x 297 mm)  
Greeting card  
4 x 5.5 in. (101 x 140 mm)  
4 x 8 in. (101 x 203 mm)  
Safety information  
• Always follow all warnings and instructions marked on the product.  
• Use only the power source indicated on the product regulatory label.  
• Use only the power cord that comes with the product. Using another power cord  
may cause fire and/or shock. Do not use the included power cord with any other  
equipment.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
KODAK ESP 3200 Series All-in-One Printer  
• If you do not use this product for a long period of time, unplug it from the  
electrical outlet.  
• Always turn this product off by using the On/Off button. Wait until the On/Off  
button stops flashing before removing the power plug from the outlet.  
• Do not allow the power cord to become damaged or frayed.  
• If you need to use an extension cord with this product, make sure that the  
ampere rating of the product does not exceed the ampere rating of the extension  
cord.  
• Place the product on a flat, stable surface that extends beyond the product’s  
base in all directions. This product will not operate properly if tilted or at an  
angle.  
• When storing or transporting this product, do not tilt or stand it on its side.  
Never turn this product upside down (ink can leak out of the product).  
• Avoid placing this product in an environment that is subject to rapid changes in  
temperature or humidity, mechanical shocks, vibration, or dust. Do not place  
near radiators, heating vents, or in direct sunlight.  
• Leave enough room around this product for sufficient ventilation.  
• Do not block this product’s covers or openings, or insert any objects through  
slots.  
• Do not use aerosol products inside or around this product.  
• Do not spill any liquid on this product.  
• Do not attempt to repair or service this product.  
• If the power cord or plug is damaged, if any liquid has been spilled onto the  
product, if the product has been dropped or the case damaged, if the product  
does not operate normally or exhibits a major change in performance level,  
unplug this product and contact Kodak at www.kodak.com/go/contact.  
LCD screen safety  
• Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or  
chemical cleaners.  
• If the LCD screen is damaged, contact Kodak immediately. If any of the solution  
from the display gets on your hands, wash then thoroughly with soap and water.  
If the liquid crystal solution gets into your eyes, flush your eyes immediately  
with water. If any discomfort or change in vision persists after washing, seek  
medical attention immediately.  
Ink cartridge safety  
• Keep all ink cartridges out of the reach of children.  
• If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush  
immediately with water. If any discomfort or change in vision persists after  
washing, seek medical attention immediately.  
• For MSDS information on inks, go to www.kodak.com/go/MSDS.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product and Safety Specifications  
Regulatory compliance  
FCC statement  
The United states Federal Communications Commission (in CFR 47 Part 15.105) has  
specified that the following notice be brought to the attention of the users of this  
product:  
Note: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver  
• Connect the product into an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
CAUTION:  
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this  
product not expressly approved by Eastman Kodak Company might cause  
harmful interference and void the FCC authorization to operate this product.  
The radiated energy from this product is well below the FCC radio frequency  
exposure limits. Nevertheless, the product shall be used in such a manner  
that the potential for human contact during normal operation is minimized.  
This product and any attached external antenna, if supported, shall be placed  
in such a manner to minimize the potential for human contact during normal  
operation. In order to avoid the possibility of exceeding the FCC exposure  
limits, human proximity shall not be less than 20 cm (8 inches) during normal  
operation.  
Canadian  
This product meets the applicable Industry Canada technical specifications.  
statements  
Operation is subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including interference  
that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
KODAK ESP 3200 Series All-in-One Printer  
Industry Canada (IC) Radiation Exposure Statement  
This equipment complies with IC radiation exposure limits set forth for an  
uncontrolled environment. This equipment should be installed and operated with a  
minimum distance of 20 cm between the radiator and your person.  
German compliance statement  
Noise emissions for this equipment do not exceed 70 dBa.  
This equipment is not intended for use in the work place in accordance with  
BildscharbV regulations.  
“Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß  
BildscharbV vorgesehen.”  
REACH Article 33 declarations  
Go to www.kodak.com/go/REACH for information about the presence of  
substances included on the candidate list according to article 59(1) of Regulation  
(EC) No. 1907/2006 (REACH).  
Waste electrical and electronic equipment labeling  
In the European Union, do not discard this product as unsorted municipal waste.  
Contact your local authorities or go to www.kodak.com/go/recycle for recycling  
program information.  
ENERGY STAR® Qualified  
ENERGY STAR and the ENERGY STAR mark are registered U.S. service marks. As an  
ENERGY STAR partner, KODAK has determined that this product meets ENERGY  
STAR Guidelines for energy efficiency. For more information on the ENERGY STAR  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Product and Safety Specifications  
Warranty Information  
Limited Warranty  
Kodak warrants Kodak consumer electronic products and accessories (“Products”), excluding batteries, to be free from  
malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated  
sales receipt. Proof of the date of purchase will be required with any request for warranty repair.  
Limited Warranty Coverage  
Warranty service is only available from within the country where the Products were originally purchased. You may be required  
to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak  
will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or  
limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement  
parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product  
provided the Product has been returned to Kodak together with proof of the purchase price paid. Repair, replacement, or refund  
of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts  
may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be  
replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining  
warranty term of the original Product, or 90 days after the date of repair or replacement, whichever is longer.  
Limitations  
This warranty does not cover circumstances beyond Kodak’s control. This warranty does not apply when failure is due to  
shipping damage, accident, alteration, modification, unauthorized service, misuse, abuse, use with incompatible accessories or  
attachments (such as third party ink or ink tanks), failure to follow Kodak’s operation, maintenance or repacking instructions,  
failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty.  
KODAK MAKES NO OTHER EXPRESS OR IMPLIED WARRANTY FOR THIS PRODUCT, AND DISCLAIMS THE IMPLIED  
WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In the event that  
the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the  
purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak’s only obligation.  
Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of  
this product regardless of the cause. Liability for any special consequential or incidental damages (including but not limited to  
loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services or  
claims of your customers for such damages resulting from the purchase, use or failure of the Product), regardless of cause, or  
for breach of any written or implied warranty is expressly disclaimed.  
Your Rights  
Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation  
or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts,  
so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary  
from state to state or by jurisdiction. Your statutory rights are not affected.  
Outside the United States and Canada  
In countries other than the United States and Canada, the terms and conditions of this warranty may be different. Unless a  
specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists  
beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
KODAK ESP 3200 Series All-in-One Printer  
Declaration of Conformity  
Manufacturer's Name:  
Eastman Kodak Company  
Manufacturer's Address:  
16275 Technology Drive  
San Diego, CA 92127, USA  
Declares our sole responsibility that the product  
Product Name:  
KODAK ESP 3250 All-in-One Printer  
HP-A0601R3, VP-09500084-000  
US101  
Power adapters:  
Radio Module Number:  
conforms to the following Product Specifications:  
Safety: IEC 60950-1:2001  
EN 60950-1:2001 + A11:2004  
UL 60950-1:2003 R7.06  
CAN/CSA-C22.2 No. 60950-1-03  
EMC:  
EN 55022:2006+A1:2007, Class B  
CISPR 22:1997 Class B  
EN 61000-3-2:2006, Class A  
EN 61000-3-3:1995+A1:2001 +A2:2005  
AS/NZS CISPR 22:2006, Class B  
EN 61000-4-2:1995 + A1:1998 + A2:2001  
EN 61000-4-3:2006 + A1:2008  
EN 61000-4-4:2004  
EN 61000-4-11:2004  
EN 61000-4-8:2001 ED 1.1  
CFR 47, FCC Part 15, Subpart B, Class B  
EN 61000-4-5:2006  
EN 61000-4-6:2007  
ICES–003:2004 Class B  
ANSI C63.4-2003  
Radio:  
EN 301 489-1 V1.8.1 (2008-04)  
EN 301 489-17 V1.3.2 (2008-04)  
AS/NZS 4268:2003 + A1:2005 + A2:2006  
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC  
Directive 2004/108/EC and carries the CE marking. In addition, it complies with the WEEE Directive 2002/96/EC and RoHS  
Directive 2002/95/EC.  
The product was tested in a typical configuration.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
B
G
Guides  
C
Changing ink cartridges. See Replacing ink  
cartridges  
H
Copies  
I
Ink cartridge  
D
Date and time  
K
DPOF. See Tagged images printing  
Center Software  
L
Lights  
E
Enlarging or reducing a copy  
Envelopes  
Loading paper  
F
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
KODAK ESP 3200 Series All-in-One printer  
M
Printer supplies  
Marked images, printing. See Tagged images  
Printhead  
Memory cards  
Printing  
N
R
Reducing or enlarging a copy  
O
P
loading  
S
Scanner  
Settings  
Paper tray capacity  
Photo paper  
Plain paper  
T
Tagged images  
Ports  
Tray capacity  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Drive SSDSA1MH080G1 User Manual
Intel Server 5800 120Ld User Manual
Invacare Bathroom Aids 6312 User Manual
JBL Car Amplifier gto12011 II User Manual
Jenn Air Refrigerator W10183787A User Manual
Johnson Controls Air Conditioner 13 145 SEER TCGD User Manual
Jonsered Lawn Mower LM2150 User Manual
Kambrook Vacuum Cleaner KBV70 User Manual
Kenwood Stereo Receiver KR V888D User Manual
Kodak Digital Camera R502 User Manual