I C - 4 0 0 -T, I C - 5 2 5 -T & I C - 6 5 0 -T
I N - C E I L I N G L O U D S P E A K E R S
Download from Www.Somanuals.com. All Manuals SearchOAnWd DNowEnlRoa’d.S M A N U A L A N D W A R R A N T Y
5. Insert the speaker into the cutout hole. With a #2 Phillips screw-
driver, tighten the four dog clamps until they are seated securely
against the ceiling surface. Do not overtighten.
Seismic Tab
A seismic tab, located on the back of the speaker, is used
as a secondary security point. Some construction codes may
require its use. To utilize the seismic tab, run a support wire
from a secure point in the ceiling and attach it to the tab.
Be sure to consult the construction codes in your area.
Klipsch recommends the use of this tab in all installations as
a secondary means of support.
15W
1.875W
7.5W
3.75W
3.75W
7.5W
15W
IC-400-T tap selectable
30W
3.75W
7.5W
15W
7.5W
15W
30W
IC-525-T tap selectable
60W
7.5W
15W
30W
30W
15W
60W
6. For installations using 70v/100v input connection, set the switch
on the front panel to the desired setting. For applications where 8
Ohm impedance is desired, the switch should be set to 8 Ohms.
Note: The speaker comes from the factory set at the lowest
output setting (highest impedance).
IC-650-T tap selectable
7. Using the flat of your hand, insert grille into speaker frame
making sure it is securely seated and flush.
Download from Www.Somanuals.com. All Manuals Search And Download.
I
N - C
E
I
L
I
N
G
S
P
E
A
K
E
R
S
I C - 4 0 0 - T , I C - 5 2 5 - T & I C - 6 5 0 - T SPECIFICATIONS
IC-400-T
FREQUENCY RESPONSE
CONT. POWER HAND.
CALC MAX CONT. OUTPUT @ 1M
SENSITIVIT Y 2.83 V/1M
COVERAGE
70-20k Hz +/- 4 dB
50 watts (14.5V)
100 dB
86dB
80 degrees
8 dB
DI
Q
6.3
NOMINAL IMPEDANCE
DIAMETER
8 ohms, min 4.2 ohms when switch is set to 8 ohm position
9"
CUTOUT DIAMETER
OVERALL DEPTH
MOUNTING DEPTH
WEIGHT
9.125"
8.313"
8"
6.25 lbs.
Terminal Strip
INPUT CONNECTORS
TRANSFORMER TAPS
FINISHES
70V: 15W, 7.5W, 3.8W, 1.9W
Black and White
100V: 15W, 7.5W, 3.8W
TRANSDUCERS
5" WOOFER AND 1" TITANIUM DIAPHRAGM COMPRESSION
DRIVER ON A 2" ROUND TRACTRIX HORN
Vented Via A 1" Tractrix port
ENCLOSURE TUNING
IC-525-T
FREQUENCY RESPONSE
CONT. POWER HAND.
CALC MAX CONT. OUTPUT @ 1M
SENSITIVIT Y 2.83 V/1M
COVERAGE
65-20k Hz +/- 4 dB
65 watts (16.5V)
104 dB
89dB
105 degrees
DI
6.5 dB
Q
4.5
NOMINAL IMPEDANCE
DIAMETER
8 ohms, min 4.2 ohms; switch set in 8 ohm position
9"
CUTOUT DIAMETER
OVERALL DEPTH
MOUNTING DEPTH
WEIGHT
9.125"
9.188"
8.875"
8.25 lbs.
Terminal Strip
INPUT CONNECTORS
TRANSFORMER TAPS
FINISHES
70V: 30W, 15W, 7.5W, 3.8W
Black and White
100V: 30W, 15W, 7.5W
TRANSDUCERS
5.75" WOOFER AND 1" TITANIUM DIAPHRAGM COMPRESSION
DRIVER ON A 3.5" ROUND XT MODIFIED TRACTRIX HORN
Vented Via A 1" Tractrix port
ENCLOSURE TUNING
Download from Www.Somanuals.com. All Manuals Search And Download.
IC-650-T
FREQUENCY RESPONSE
CONT. POWER HAND.
50-20k Hz +/- 4 dB
80 watts (18.8 V)
CALC MAX CONT. OUTPUT @ 1M
SENSITIVIT Y 2.83 V/1M
COVERAGE
106 dB
90dB
105 degrees
DI
6.5 dB
Q
4.5
NOMINAL IMPEDANCE
DIAMETER
8 ohms, min 4.4 ohms; switch set in 8 ohm position
10"
CUTOUT DIAMETER
OVERALL DEPTH
MOUNTING DEPTH
WEIGHT
10.125"
10.938"
10.625"
11.25 lbs.
Terminal Strip
INPUT CONNECTORS
TRANSFORMER TAPS
FINISHES
70V: 60W, 30W, 15W, 7.5W
100V: 60W, 30W, 15W
Black and White
TRANSDUCERS
6.5" WOOFER AND 1" TITANIUM DIAPHRAGM COMPRESSION
DRIVER ON A 3.5" ROUND XT MODIFIED TRACTRIX HORN
Vented Via A 1" Tractrix port
ENCLOSURE TUNING
Klipsch Limited Warranty
KLIPSCH, AUDIO TECHNOLOGIES ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the
terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace
(at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or
amplifiers, the Warranty on those parts is for a period of two (2) years from the date of purchase.
To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. If your dealer is not
equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please call KLIPSCH at
1-800-KLIPSCH for instructions. You will need to ship this product in either its original packaging or packaging affording an equal degree
of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must
be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not
purchased from a KLIPSCH authorized dealer. You may call 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you
purchased from a KLIPSCH authorized dealer.
This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or
modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installa-
tion, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unau-
thorized repairs will void this Warranty. This Warranty does not cover product sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions
may not apply to you. This Warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
©2007 Klipsch Group, Inc. All Rights Reserved
Specifications Subject to Engineering Changes
Download from Www.Somanuals.com. All Manuals Search And Download.
3502 Woodview Trace
Indianapolis, Indiana 46268 USA
.
.
1 800 KLIPSCH
•
1008997
Download from Www.Somanuals.com. All Manuals Search And Download.
|