S15L7, S12L7, S10L7, S8L7
Congratulations! You have just purchased one of the most advanced subwoofers in the history of car audio. Your KICKER Solo-Baric is
the latest in KICKER’s trend-setting Solo-Baric line, designed and engineered to deliver the ultimate in low bass performance and
unmatched durability when installed in a properly designed system. Thanks for buying KICKER. Enjoy.
Solo-Baric Features
Cast Aluminum Basket (patent pending) for strength and to reject stray magnetic fields
Perimeter Venting in basket for continuous voice coil cooling and highly linear response
Highly Rigid Cone (patent pending) with high internal damping and excellent resistance to sunlight, pollution, and moisture
Inverted Structural Dome™ further increases cone’s resistance to flex under pressure
Stitched Surround (patent pending) prevents cone/surround separation at high excursions
Blackened Motor Parts for superior heat dissipation and long life
Dual Ultra-Length Voice Coils for high excursion and flexible wiring options
High-Temp Kapton Voice Coil Former prevents cone meltdown to minimize warping and rubbing
One piece UniPlate™ pole piece and back plate:
Blackened Pole Piece provides effective heat transfer and cool operation for maximum power handling
One-Piece Hyper-Extended Pole reduces non-linear magnetic fields around the voice coil gap for even more heat sinking and
excellent cone motion control
Vented Pole Piece releases pressure under dustcap for freer cone motion and enhanced low bass
Sleeved High-Power Tinsel Lead Wires to resist lead breakage and power-robbing resistance losses
Spring-Loaded Nickel Plated Terminals for solid connections with large gauge speaker wire
Rubatex front and rear gaskets for airtight seal
Specifications
Model
Max amp power
(watts)
Sensitivity
(dB 1w/1m)
Voice Coil
(in.)
Fs
(Hz)
Vas
(cu.ft)
Qts
Xmax Mounting Cutout Outer flange
Mounting depth
(in.)
(in.)
.60
.50
.50
.41
(in.)
(in.)
S15L7
S12L7
S10L7
S8L7
1000
750
600
450
90.2
89.1
87.3
84.5
2.5
2.0
2.0
2.0
23.0
29.7
35.1
43.5
9.9
3.1
1.2
.46
.477
.419
.410
.551
14.1 x 14.1
11.2 x 11.2
9.5 x 9.5
7.6 x 7.6
15.6 x 15.6
12.54 x 12.54
10.66 x 10.66
8.8 x 8.8
7.83
7.00
6.25
4.63
Based on measurements of Dual 2 Ohm models
Important Break-In Information
Every Solo-Baric L7 subwoofer is individually computer-tested before shipment to insure the highest performance standards possible.
Like many precision machines, the Solo-Baric L7 requires a break-in period before it will reach optimum performance.
When brand new, the L7-series high performance suspension system is very stiff. After approximately two weeks of daily usage, the suspen-
sion will loosen, or break-in, to a point of equilibrium. This time period may vary depending on the amount of play time, volume level, and type
of music you listen to. More play time, with medium volume levels and more bass content, will break in the subwoofer most quickly.
For those of you with more sophisticated audio equipment, the Solo-Barics can be broken-in on the test bench overnight with the following
procedure.
Solo-Baric Freeair Break-In Procedure
1. Connect the speaker to a power amp of about fifty watts or more. The speaker should not be mounted in any enclosure - just freeair.
2. Connect an audio generator to the input of the power amp, and adjust the generator to approximatley 45Hz for the S8L7, 35Hz for the
S10L7, 30Hz for the S12L7, and 20Hz for the S15L7.
3. Now adjust the gain on the amplifier and generator so that the cone is moving to Xmax. This can be determined visually by looking at the
"blur depth" of the logo on the dustcap. A close approximation will do. On the S8L7 this will be about 3/4", on the S10L7 about 1", on the
S12L7 about 1", and on the S15L7 about 1 1/4".
4. Operate the speakers in this manner for about eight hours. A quick break-in will give acceptable results in four hours, and a very thorough
break-in would be closer to 16 hours.
NOTE: Keep in mind that as the speaker is used under normal conditions the break-in will continue, so if you don't have time for the complete
break-in period the speaker will still break-in itself under normal usage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Enclosures
Solo-Baric L7-Series Sealed Enclosure Applications
The Kicker Solo-Baric L7 woofers are obviously different than any woofer you have ever seen. Designed to give more output than an equiva-
lent round speaker, the L7 is amazing when used in the recommended sealed boxes. These sealed enclosure SQ recommendations will give the
smoothest response with the most energy at really low frequencies, around 20 to 30 Hz.
The recommended Compact sealed boxes are in line with our traditional Solo-Baric enclosures. They have the highest power handling capabil-
ity of all our recommended enclosure designs. They deliver massive amounts of high impact bass and can be driven with punishing levels of
amplifier power.
One of the benefits of the L7-series high performance suspension system is that the new Solo-Barics can operate in larger sealed enclosures
for ultra sound quality (SQ) applications without significantly sacrificing their power handling. This extra bass extension and smoothness can be
obtained by simply using a larger sealed enclosure. The box can be "sized up" all the way to a .707 Qtc enclosure, which has a very flat response,
with greatly extended sub bass.
Solo-Baric L7 series woofers also perform well in any sealed enclosure between the Compact and SQ sizes. These systems will exhibit some
benefits of both (high impact and low extension) generally sounding more like the box to which they are most closely sized.
These enclosure volume recommendations are for the airspace inside the enclosure and include the displacement of the woofer. Do not
make the airspace any greater than recommended.
Recommended Sealed Enclosures – Moderate Efficiency
Solo-Baric Model
Compact (minimum enclosure volume)
.33 cu.ft. Power Handling = 450W
.66 cu.ft. Power Handling = 600W
.88 cu.ft. Power Handling = 750W
1.5 cu.ft. Power Handling = 1000W
SQ (.707 alignment) (maximum enclosure volume)
S8L7
.75 cu.ft. Power Handling =450W
S10L7
S12L7
S15L7
1.0 cu.ft. Power Handling = 600W
2.0 cu.ft. Power Handling = 750W
6.0 cu.ft. Power Handling = 1000W
The following shows examples of the minimum enclosure sizes for each of the Solo-Baric L7s. Panel dimensions assume 3/4" wood thickness.
Panel dimensions for minimum recommended enclosures:
Model
S8L7
S10L7
S12L7
S15L7
Volume (cu.ft.)
Panel A
Panel B
10"x8"
12"x10.5"
13"x11.5"
16.5"x11.5"
Panel C
8"X8.5"
10.5"x10.5"
11.5"x11.5"
15"x11.5"
0.33
0.66
0.88
1.5
10"x10"
12"x12"
13"x13"
16.5"x16.5"
NOTE: All sealed boxes should be 50% filled with loose polyfil. Allow about two weeks break-in time for the Solo-Barics to reach optimum low
bass performance.
Solo-Baric L7-Series Ported/Vented Enclosure Applications
Ported Solo-Barics? Absolutely ... and with a vengeance! This is totally new for Solo-Barics, and it is very exciting! The new enclosures incorpo-
rate massive slot loaded ports with ultra low air velocity for concussive street bass that will make your hair stand on end (if you have any left)!
These are the type of boxes that are rapidly becoming the "enclosure of choice" for outrageous street bass and high performance SPL con-
tests.
The following chart shows three recommended ported enclosures for each Solo-Baric driver.
Compact has increased bass efficiency over a sealed enclosure, yet can still fit in tighter applications. It is the smallest design that will work well
for each woofer. Although it is the smallest ported enclosure the output from 30 to 80 Hz will be considerably higher than that of a sealed box.
This smallest vented design is for places where you can only give up the room normally taken up by two L7s in the normal small sealed boxes.
The two other ported designs have proportionately more output in this region.
SPL is a medium sized enclosure that will kick out bass that can be heard for blocks away. And it does go LOW!
Finally, SPL / Deep Bass is a large enclosure that has it all. It is high efficiency and will deliver the output needed to win SPL contests, yet low fre-
quencies go all the way down to the basement - with power that will shake the
foundations! We’re talking truly awesome.
If space is not at a premium and you want to get the most from your Solo-Baric L7, try one of these designs. You won’t be disappointed.
Recommended Ported Enclosures – High Efficiency
Solo-Baric Model
Compact
SPL
SPL / Deep Bass
S8L7
.66 cu.ft. + port;
.8 cu.ft. + port;
1.0 cu.ft. + port;
1.5x9.5" port, 19.25" long
Power Handling = 300W
1.75x9.5" port, 19.75" long
Power Handling = 325W
2x9.5" port, 21.25" long
Power Handling = 325W
S10L7
S12L7
S15L7
1.25 cu.ft. + port;
2.5x11.25" port, 19.75" long
Power Handling = 500W
1.75 cu.ft. + port;
2.75x11.25", port 17.75" long
Power Handling = 525W
2.25 cu.ft. +port;
3x11.25" port, 18" long
Power Handling = 550W
1.75 cu.ft. + port;
2.5x13.25" port, 22.5" long
Power Handling = 750W
2.5 cu.ft. + port;
2.5x13.25" port, 16.5" long
Power Handling = 750W
3.25 cu.ft. + port;
3x13.25" port, 14.5" long
Power Handling = 750W
3.0 cu.ft. + port;
4.5 cu.ft. + port;
6.0 cu.ft. + port;
2.5x16.25" port, 19.5" long
Power Handling = 1000W
3x16.25" port, 14.75" long
Power Handling = 1000W
3.5X16.25"port, 13.75"long
Power Handling =1000W
NOTE: The use of a subsonic filter (such as a Kicker SWX - without chips & set to highpass) will significantly increase the power handling. The
power handling specifications listed in the chart above include the use of a 25 Hz, 24dB/octave subsonic filter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Ported SPL Enclosure for S8L7
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Ported SPL Enclosure for S10L7
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Ported SPL Enclosure for S12L7
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Ported SPL Enclosure for S15L7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER SYSTEMS LIMITED WARRANTY
Stillwater Designs warrants this product to be free from defects in material and workmanship under normal use for a period
of one (1) year from date of original purchase, unless this product is labeled “B Stock”, in which case it is warranted for
ninety (90) days from date of purchase. Should service be necessary under this warranty for any reason due to manufacturing
defect or malfunction during the warranty period, Stillwater Designs will replace or repair (at its discretion) the defective mer-
chandise with equivalent merchandise at no charge. Warranty replacements on “B-Stock” may have cosmetic scratches and
blemishes. Discontinued products may be replaced with equivalent products.
This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as provided
herein beginning with the date of the original purchase at retail, and no warranties, whether express or implied, shall apply to
this product thereafter. Some states do not allow limitations on implied warranties, therefore these exclusions may not apply to
you.
This warranty gives you specific legal rights; however you may have other rights that vary from state to state.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE
Defective merchandise must be returned to your local Authorized Stillwater Designs (Kicker/Impulse) Dealer for warranty.
Assistance in locating an Authorized Dealer can be obtained by writing or calling Stillwater Designs direct. You can confirm that a
dealer is authorized by asking to see a current authorized dealer window decal.
If it becomes necessary for you to return defective merchandise, call the Kicker Customer Service Department at (405)624-
8510 for a Return Authorization (RA) number. Package all defective items in the original container or in a package that will pre-
vent shipping damage, and return to
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075
The RA number must be clearly marked on the outside of the package. Return only defective components. Return of entire
cabinets, system packs, pairs, etc. increases your return freight charges. Non-defective items received will be returned freight
collect.
Include a dated proof-of-purchase from an Authorized Dealer. Warranty expiration on items returned without proof-of-
purchase will be determined from the manufacturing date code. Coverage may be invalidated if this date is greater than one (1)
year previous to the date item is sent in. Freight must be prepaid; items received freight collect will be refused.
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service
Department at (405)624-8510.
WHAT IS NOT COVERED?
This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover:
• Install slips (screwdriver holes)
• Damage caused by exposure to water
and/or excessive heat.
• Items previously repaired by any
unauthorized repair facility.
• Items returned from unauthorized
individuals or dealers.
• Damage through negligence, misuse, or
accident.
• Return shipping on non-defective items.
• Speakers damaged due to amplifier
clipping or distortion.
• Speakers with silicon caulk used for gasket
material.
• Items physically damaged due to abuse.
• Freight damage.
• The cost of shipping product to Stillwater
Designs Service.
HOW LONG WILL IT TAKE?
Stillwater Designs maintains a goal of 24-hour service for all returns. Delays may be incurred if lack of replacement inventory
or parts is encountered.
INTERNATIONAL WARRANTY
Contact your International Stillwater Designs dealer or distributor concerning specific
procedures for your country’s warranty policies.
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510
KICKER drivers are capable of producing sound levels that can permanently
damage your hearing! Turning up a system to a level that has audible distortion is more damag-
ing to your ears than listening to an undistorted system at the same volume level. The thresh-
old of pain is always an indicator that the sound level is too loud and may permanently damage
WARNING:
your hearing.
Please use common sense when controlling volume!
January 2001
Download from Www.Somanuals.com. All Manuals Search And Download.
|