OWNER’S MANUAL
QUESTIONS?
Call Our Toll Free
Keys Fitness Helpline
1-888-340-0482
1-888-340-0482
Monday-Friday
8:30-5:30 Central Time
CAUTION!
Please read the precautions and
Keys Fitness Products, L.P.
Keys Fitness Products, L.P.
4009 Distribution Dr.
Suite 250
instructions in this manual before
using this equipment. Please save
this manual for future reference.
P.O. Box 551239
Dallas, Texas 75355-1239
Garland, Texas 75041
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
Safety Precautions and Tips
It is the owner's responsibility to ensure that all users of this exer-
cise bike have read the Owner's Manual and are familiar with
warnings and safety precautions.
Thank you for purchasing a Keys exercise bicycle! This quality
product you have chosen was designed to meet your needs for
cardiovascular exercise.
• This exercise bike has a maximum user capacity of 300 pounds.
Prior to assembly, remove components from the box and verify
that all the listed parts were supplied. Assembly instructions are
described in the following steps and illustrations.
• The Alliance Exercise Bike should only be used on a level sur-
face and is intended for indoor use only. It should not be placed
in a garage, patio or near water. Keys recommends an equip-
ment mat be placed under the bicycle to the protect the floor or
carpet and for easier cleaning.
Important Safety Information
WARNING!
• Wear comfortable, good-quality walking or running shoes and
appropriate clothing. Do not use this exercise bike with bare
feet, sandals, socks or stockings!
1) Before using this exercise bicycle or starting any exercise
program, consult your physician. This is especially important
for persons over the age of 35 and/or persons with pre-existing
health problems. Keys Fitness Products LP assumes no respon-
sibility for personal injury or property damage sustained by or
through the use of this product.
• Always examine your exercise bike before using to ensure all
parts are in working order.
• Do not leave children unsupervised near or on the exercise
bicycle.
2) To reduce the risk of electrical shock, burns, fire or other pos-
sible injuries to the user, it is important to review
• Never operate the exercise bicycle where oxygen is being
administered or where aerosol products are being used.
this manual and the following precautions before operation.
• Never insert any object or body parts into any opening.
• Service to your Alliance Exercise Bike should only be per-
formed by an authorized service representative, unless author-
ized and/or instructed by a Keys technician. Failure to follow
these instructions will void the warranty.
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2a. Attach the rear handlebar (22) to
the seat carriage (3) with the flat
washers (50) and screws (79) pro-
vided. Connect the seat cushions
(9,10) to the seat carriage (3) with
the washers (78) and screws (80).
Assembly of Alliance
920 Recumbent Bike
REMOVE ALL SECURITY TAPE AND WRAPPING
BEFORE BEGINNING.
2a
1
2b
2b. First remove the support tube (24), from the main frame (1).
Slide the assembled seat carriage onto the carriage tube (16).
Re-assemble the support tube (24). Attach the end cap (17)
with screws (57) and rear carriage tube rubber stopers (66)
with bolts (74, 75) and washer (76).
1. Attach foot tubes (4) to the frame by using the carriage bolts
(44), flat washers (50) and cap nuts ( 45) provided. Make sure
the foot tube with wheels is assembled onto the front of the
unit.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
3
4. Slide the console tube (2) through the console tube collar (14).
Connect the computer cable in the console tube (2) to
the computer cable in the main frame. Attach the console tube
(2) to the frame (1) with the locknuts (49), flat washers (50)
and screws (56) provided. Attach the console tube collar (14)
to the main frame (1) with screws (57).
3. Attach pedals (30, 31). Axles of pedals are branded “L” and
“R.” The pedal marked “R” goes on the right hand side of the
bike and the one marked “L” on the left hand side. Tighten
the left pedal by turning counter-clockwise and the right pedal
by turning clockwise.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
6. Connect the computer cable at the top of the console tube (2)
to the console (5). Both computer cable connections have
white ends. Feed the pulse wires from the console (5) down
into the console tube (2) and out the rear hole in the handlebar
area. Attach the console tube (2) to the console (5) with the
screws (59) provided and already attached to back of the
console (5). Attach bottle rack to console tube (2).
5. Load your console with the batteries provided. Batteries are 4
“AA” size.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
7. Attach the pulse wires in the front handlebar (23) to the
wires from the console (5). Connect the front handlebar (23)
to the console tube with the locknuts (49), flat washers (50)
and screws (55) provided. Make sure not to “pinch” any
of the pulse wires when connecting the handlebar to the
console tube.
8. You have completed the assembly of your new Alliance bike.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
920R PARTS LIST
920R EXPLODED VIEW
# PART
QTY
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
1
1
1
2
2
2
1
2
1
1
1
1
1
2
1
2
1
1
2
1
1
#
PART
QTY
1
FRAME
43 CRANK CENTRAL CAP
44 M8X85mm CARRDIAGE BOLT
45 M8 CAP NUT
2
2
CONSOLE TUBE
4
4
4
2
2
18
2-1 BOTTLE RACK
3
4
5
6
7
8
9
SEAT CARRIAGE
FOOT TUBE
CONSOLE
46 M6 LOCKNUT
47 6mm HEX NUT
48 M10 CAP NUT
49 M8 LOCKNUT
50 M8 IDX18.8mm FLAT WASHER 38
51 M20X32X2mm WASHER
52 CRANK NUT
PULLEY
GENERATOR
CONTROLLER BOARD
SEAT CUSHION
2
2
1
1
3
3
30
4
4
4
2
2
2
1
1
4
6
6
4
4
2
4
2
2
2
2
2
8
12
8
1
2
2
4
10 BACK SEAT CUSHION
11 BOTTOM LEFT COVER
12 BOTTOM RIGHT COVER
13 TOP COVER
14 CONSOLE TUBE COLLAR
15 CONNECTING COVER
16 CARRIAGE TUBE
17 END CAP
53 M8X17mm SCREW
54 M8X38mm SCREW
55 M8X57mm SCREW
56 M8X60mm SCREW
57 TP4X12mm SCREW
58 TP5X50mm SCREW
59 M5X10mm SCREW
60 M6X45 MACHINE SCREW
61 REAR SLEEVE
62 REAR BALL PLUG
63 FRONT BALL PLUG
64 CAM LOCK
65 SEAT CARRIAGE BRACKET
66 RUBBER STOPPER
67 SMALL ROLLER
68 M8 WAVED WASHER
69 M13 WAVED WASHER
70 8*13mm BUSHING
71 RETAINING RING
72 8*34mm SCREW
73 BIASED 8*34mm SCREW
74 11*58mm SCREW
75 M6x15mm SCREW
76 6x13mm WASHER
77 8x169mm WASHER
78 6x16mm WASHER
79 M8x15mm SCREW
80 ROUND HEAD M6x60mm SCR
81 M8x45 MACHINE SCREW
82 M8x70mm SCREW
83 FRONT SLEEVE
18 ADJUSTING PLATE
19 “V” BELT
20 WHEEL
21 FOOT CAP
22 REAR HANDLEBAR
23 FRONT HANDLEBAR
24 SUPPORT TUBE
25 HAND PULSE
26 PULSE WIRE
27 CONTROLLER EXT. WIRE
28 CONTROLLER WIRE
29 9mm NUT
30 LEFT PEDAL
31 RIGHT PEDAL
32 LEFT CRANK
33 RI GHT CRANK
34 LOCKING KNOB
35 6004 PRECISE BEARING
36 608 PRECISE BEARING
37 EYEBOLT
38 SPRING
39 BELT TENSION BRACKET
40 ADJUSTMENT CHANNEL
41 SENSOR
84 SQUARE CAP
42 IDLER PULLEY
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
920R Display Instructions
Your Alliance 920R is equipped with a programmable monitor to
help you track your progress and motivate you to reach your fit-
ness goals. In order to set your programmable monitor, you must
begin pedaling.
1. Key Functions:
a. RESET - Resetting all cumulative values to zero.
b. ENTER - Confirming of “set values,” “selections” and
“Quick Start” function.
-
c.
Increasing and decreasing the set values and resistance
+
during Operation.
2. Display:
There are three displays in the console:
W1= display window on top, W2=display window in middle and
W3= last display window at bottom of console.
a. W1 = Display every cumulative value including TIME, CALORIES,
DISTANCE, SPEED and RPM.
. .. .
.8..8. 8 8
b. W2 =
1. display profile of every program.
2. display operation information in input mode by rolling characters.
3. display “score” when “Fitness Test” program is finished. (see step 4D)
c. W3 = Display “Heart Rate” and ”Workout Level.”
8 8 8
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
C. “HRC” program.
3. Indicator:
a. TIME
b. CALORIES
d. SPEED
e. RPM
f. SCAN
g. MANUAL
h. CONSTANT POWER
i. INTERVAL
j. HILLS
k. PLATEAU
l. MOUNTAIN
m. HRC
1. Step 1 to 6 is similar to B, but “HRC” program also requires age and
target heart rate.
7. Press ENTER key, (W2) displays “ENTER AGE” and (W1) displays
preset age of last operation.
-
8. Set age of exerciser by
keys.
+
9. Press ENTER key, (W2) displays “TARGET HART RATE,” (W1)
displays preset value of target heart rate, which depends on age of
the exerciser.
-
10. Choose target heart rate by
11. Press ENTER key.
12. (W2) displays “PRESS ENTER TO BEGIN”
13. Press ENTER key and start to exercise.
keys.
+
n. FITNESS TEST
D. “FITNESS TEST” program.
This 8 minute test program calculates your approximate oxygen uptake. At
the end of the program you will receive a Fit Test Score which is the equiva-
lent of your approximate VO2 max. This number should be used as a refer-
ence to gauge aerobic improvements over an extended workout protocol.
Please use the following table for reference only:
4. Operation Process:
A. “QUICK START” MODE:
1. Press RESET key, all LED of the console turns on for 2 seconds.
2. Press ENTER key during 2 seconds in step 1, the console is in “Quick
Start” mode, and displays the profile of “Manual” program.
3. “TIME” and “SCAN” indicators of (W1) turn on. Operation time is count-
ing up and every display value of (W1) is scanning per 4 seconds interval.
4. (W2) displays each column as 1 minute of operation then the completed
column will shift to the right.
Standards for evaluating aerobic fitness (VO2 max)
Age
Low
Fair
Average
Good
High
-
Women
20-29
30-39
40-49
50-59
60-69
+
5. Exerciser can adjust working level by
6. Stop this mode by pressing RESET key.
keys
<24
<20
<17
<15
<13
24-30
20-27
17-23
15-20
13-17
31-37
28-33
24-30
21-27
18-23
38-48
34-44
31-41
28-37
24-34
>49
>45
>42
>38
>35
B. “MANUAL,” “CONSTANT POWER,” “INTERVAL,” “HILLS,”
“PLATEAU” and “MOUNTAIN” programs.
1. Press RESET key, (W2) displays ENTER WEIGHT
-
2. Preset weight of exerciser by
keys.
+
Men
20-29
30-39
40-49
50-59
60-69
3. Press ENTER key, (W2) displays “SELECT PROGRAM”.
-
<25
<23
<20
<18
<16
25-33
23-30
20-26
18-24
16-22
34-42
31-38
27-35
25-33
23-30
43-52
39-48
36-44
34-42
31-40
>53
>49
>45
>43
>41
4. Choose desired program by
keys and indicators of desired program
+
turn on. Corresponding profile of program is displayed on (W2).
5. Press ENTER key, (W2) displays “WORKOUT TIME” and (W1)
displays preset time value of last operation.
-
6. Set new time value by
7. Press ENTER key.
keys.
+
8. (W2) displays “PRESS ENTER TO BEGIN”
9. Press ENTER key and start to exercise.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Step 1-4 is similar to B, but “FITNESS TEST” program also requires age
and sex of user.
Monitoring Your Heart Rate
5. Press ENTER key, (W2) displays “ENTER AGE” and (W1) displays
To obtain the greatest cardiovascular benefits from your exercise
workout, it is important to work within your target heart rate
zone. The American Heart Association (AHA) defines this target
as 60%-75% percent of your maximum heart rate.
preset age of last operation.
-
6. Set age of the exerciser by
7. Press ENTER key, (W2) displays “SET SEX,”
keys.
+
-
8. Choose “MALE” or “FEMALE” by
keys, (W1) displays MALE
+
or FEMALE correspondingly.
9. Press ENTER key, (W2) displays “PRESS ENTER TO BEGIN”
Your maximum heart rate may be roughly calculated by subtract-
ing your age from 220. Your maximum heart rate and aerobic
capacity naturally decreases as you age. This may vary from one
person to another, but use this number to find your approximate
effective target zone. For example, the maximum heart rate for an
average 40 year-old is 180 bpm. The target heart rate zone is
60%-75% of 180 or 108-135 bpm. See Fitness Safety on page 20.
10. Press ENTER key and start to exercise.
E. START MODE
1. Each column of (W2) represents one minute of operation when time is
being counted up.
2. In (W2) presetting time value divided by 16 is equal to each column
when operation time is being counted down.
3. Press ENTER key to change the “SCAN” function in operation and the
corresponding indication of “SCAN” will turn on or off.
-
Before beginning your workout, check your normal resting heart
rate. Place your fingers lightly against your neck, or against your
wrist over the main artery. After finding your pulse, count the
number of beats in 10 seconds. Multiply the number of beats by
six to determine your pulse rate per minute. We recommend tak-
ing your heart rate at these times; at rest, after warming up, dur-
ing your workout and two minutes into your cool down, to accu-
rately track your progress as it relates to better fitness.
4. The exerciser can adjust workout level by using
except during “FITNESS TEST” program.
keys in operation
+
F. RESULT MODE
1. When operation time is finished, the console is in
“Result state”, (W1) displays the following data in
4 second intervals.
a. Total operation time.
b. Cumulative calories.
c. Cumulative distance.
d. Average speed.
e. Average RPM.
2. W3 displays “average heart rate”
3. W2 displays “RESULTS MODE” and shows profiles
of every program for 2.5 seconds sequentially, except in
“FITNESS TEST” program.
During your first several months of exercising, the AHA recom-
mends aiming for the lower part of the target heart rate zone-
60%, then gradually progressing up to 75%.
According to the AHA, exercising above 75% of your maximum
heart rate may be too strenuous unless you are in top physical
condition. Exercising below 60% of your maximum will result in
minimal cardiovascular conditioning.
4. W2 displays “SCORE=000” when “FITNESS TEST”
Program is completed.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Check your pulse recovery rate – If your pulse is over 100 bpm
five minutes after you stop exercising, or if it’s higher than
normal the morning after exercising, your exertion may have been
too strenuous for your current fitness level. Rest and reduce the
intensity next time.
TARGET HEART RATE ZONE
Fitness Safety The target heart rate chart indicates aver-
age rate zones for different ages. A variety of different factors (including
medication, emotional state, temperature and other conditions) can
affect the target heart rate zone that is best for you. Your physician or
health care professional can help you determine the exercise intensity
that is appropriate for your age and condition.
200
195
100%
190
185
180
175
170
165
160
Serious
athletic
training range
155
132
85%
170
166
162
157
153
149
145
140
136
Cardiovascular
conditioning
range
(MHR) = Maximum Heart Rate
(THR) = Target Heart Rate
150
146
75%
143
139
135
131
128
124
120
Fat burning
range
116
93
220 - age = maximum heart rate (MHR).
MHR x .60 = 60% of your maximum heart rate.
MHR x .75 = 75% of your maximum heart rate.
60%
120
117
114
111
108
105
102
99
96
For example, if you are 30 years old, your
calculations will be as follows:
220 - 30 = 190
20
25 30
35
40 45
50
55 60 65
190 x .60 = 114 (low end or 60% of MHR)
190 x .75 = 142 (high end or 75% of MHR)
30 year-old (THR) Target Heart Rate would be 114-142.
AGE
See Table on right for additional calculations.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|