Owner’s manual
Keurig® K-Cup® K40/K45 Elite Brewer
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: There are two sharp needles that puncture the K-Cup® pack, one
above the K-Cup® Pack Holder and the other in the bottom of the K-Cup® Pack
Holder. To avoid risk of injury, do not put your fingers in the K-Cup® Pack
Assembly Housing.
TABLE OF CONTENTS
KEURIG® GOURMET SINGLE CUP HOME BREWING SYSTEM
K40/K45 EliteBrewer — Using Your Brewer
CAUTION: There is extremely hot water in the K-Cup® Pack Holder during the
brew process. To avoid risk of injury, do not lift the Handle or open the K-Cup®
Pack Assembly Housing during the brewing process.
SeT-uP
Helpful Hints........................................................................................4
Unpacking ............................................................................................4
Features ...............................................................................................5
CAUTION: Do not fill above MAX FILL line. If you fill the Water Reservoir above this
point, you may occasionally get a larger brew than you selected for your first brew
of the day. If you prefer to have your reservoir filled to the top, we recommend you
use a large mug for your first brew of the day to avoid any risk of overflow.
SecTIon 1—SET-UP & FIRST BREW
Set-Up & First Brew...........................................................................6
CAUTION: Please always keep the brewer in its upright position to avoid
potential injury and/or damage to your brewer.
SecTIon 2—CONTROLS & INDICATORS
Programming Auto Off Timer Feature..........................................10
SHORT CORD INSTRUCTIONS: A short power supply cord is provided to
reduce the risk of becoming entangled in or tripping over a longer cord.
SecTIon 3—CLEANING & MAINTENANCE
If an extension cord is used, (1) the marked electrical rating of the cord set or
extension cord should be at least as great as the electrical rating of the
appliance; (2) the cord should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or tripped over
unintentionally; and (3) the extension cord must include a 3-prong grounding plug.
Cleaning..............................................................................................10
De-Scaling.......................................................................................... 11
Storage ...............................................................................................12
SecTIon 4—TROUBLESHOOTING..................................................13
THIS PRODUCT IS FOR houSehoLD uSe onLY.
SecTIon 5 —WARRANTY................................................................14
WARNING
THIS PRODUCT CONTAINS CHEMICALS, INCLUDING
LEAD, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER,
BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
record your Brewer Serial number here.
See Unpacking Instructions on page 4 for serial number location.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT REMOVE THE
WARNING
BOTTOM COVER. NO USER SERVICEABLE
PARTS ARE INSIDE. REPAIR SHOULD BE DONE
BY AUTHORIZED SERVICE PERSONNEL ONLY.
RISK OF FIRE OR
ELECTRIC SHOCK
DO NOT OPEN
Removing the serial number label from the brewer will void warranty.
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-Up
4. Customize the size, flavor & brew that’s
perfect for you.
2. Remove enclosed literature.
helpful hints
3. Turn the box on its side with front of box
face down.
With the choice of over 200 varieties of K-Cup®
packs and 3 brew sizes (Small Cup-5.25 oz.,
Small Mug-7.25 oz. and Large Mug-9.25 oz.),
your Keurig® brewer gives you endless options
to customize the size, flavor and brew that’s
perfect for you. For a strong, intense cup, select
an Extra Bold K-Cup® pack (with up to 30%
more ground coffee than regular varieties) and
brew size that’s right for you. The smaller the
brew size, the more intense flavor in your cup.
The larger the brew size, the less intense flavor
in your cup.
1. Plug brewer into its own grounded outlet.
If the electric circuit is overloaded with other
appliances, your brewer may not function
properly. The brewer should be operated on
its own circuit, separate from other appliances.
4. Reach into the box and grasp the plastic
bag that contains the brewer.
5. Carefully pull the plastic bag (and packaging
materials) toward you and out of the box. The
brewer will still be encased in the polyfoam
and be on its side.
2. Keep your brewer turned “ON.”
To brew a fresh cup of coffee, tea or hot cocoa
anytime you want, keep your brewer turned
“ON” all the time. However, you can set the
brewer to automatically turn off two hours after
your last brew. Follow the simple instructions
on page 10 to make using the brewer convenient
for you.
6. Remove the top polyfoam packaging material.
7. Carefully lift brewer off of the bottom polyfoam
and place it upright on a flat, steady surface.
5. Remove K-Cup® pack after use.
Please see page 7 for brewing instructions.
8. Lift plastic bag off of brewer.
9. Record the serial number for this brewer on
page 3 of this guide. The serial number can be
found on the bottom of the brewer box or on the
brewer behind the Drip Tray (when removed).
3. For the best tasting gourmet coffee, tea or
hot cocoa, Keurig recommends using bottled
or filtered water.
6. Brewing into a travel mug.
To brew into a travel mug, simply remove the
Drip Tray Assembly and place the travel mug
on the Drip Tray Base.
Water quality varies from place to place.
If you notice an undesirable taste in your
cup of coffee, tea or hot cocoa (such as chlorine
or other mineral tastes) we recommend you
consider using bottled water or water from a
filtration system. For best results, carefully
follow manufacturer’s instructions when using
any water filtration system.
10. Place the brewer upright on a flat, steady
surface. Remove tape holding Water Reservoir
in place.
7. De-scale brewer regularly.
Please see pages 11 and 12 for instructions.
We recommend you save all packing materials in
case future shipping of the product is necessary.
unpacking Instructions
1. Place brewer box on a large steady surface
(such as a table or countertop) or on the floor.
Open the box.
WARNING:
Keep all plastic bags away
from children.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Features K40/K45 Elite Brewer
e
h
a
Y
X
n
W
v
S
G
u
I
c
F
D
B
T
o
J
K
P
Q
r
L
M
K40/K45 Elite Brewer
A. Water Reservoir Lid
B. Water Reservoir
C. MAX FILL
Controls and Indicators
G. K-Cup® Pack Holder
(E and F are the
J. Housing
K. Drip Tray Plate
L. Drip Tray
M. Drip Tray Base
N. Vent
O. Power Cord
P. Small Cup Button
Q. Small Mug Button
R. Large Mug Button
S. Power Button
V. Auto Off Light (Green)
W. Heating Light (Red)
X. Descale Light (Red)
Y. Add Water Light (Blue)
K-Cup® Pack Holder
Assembly)
D. Water Reservoir
Lock Tab Slots
E. Handle
H. Lid
T. Power Light (Green)
U. Auto Off Button
I. K-Cup® Pack Assembly
Housing
F. Funnel
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1 Set-Up & First Brew
IMPorTanT: You cannot use your Keurig® brewer until
2
5. Place Water Reservoir base into the left side of
the brewer and be sure the Water Reservoir
Lock Tabs engage with the brewer (fig. 2).
Replace Lid on Water Reservoir.
fig.
Lock Tabs
it has been set-up for its first use as set forth below.
noTe: If brewer has been exposed to temperatures
below freezing, allow brewer at least two hours to
reach room temperature before brewing. A frozen
or extremely cold brewer will not operate.
6. Press Power Button found on upper right
panel of the brewer. The green Power Light
will illuminate. NOTE: A K-Cup® pack should
not be used for this sequence.
NOTE: If the Water Reservoir is empty or
not in place on the brewer, the blue Add Water
Light will illuminate. The Small Mug Button will
not be activated until water is added to the
Water Reservoir.
fig.
1
Setting up Your Brewer
1. Unwrap cord and plug the brewer into a
grounded outlet. Remove all pieces of
packing tape.
fig.
3
7. The brewer will automatically fill with water and
then the water will be heated. This will take
about 4 minutes. During the heating period, the
red Heating Light will illuminate. Once the
water is heated, the red Heating Light will turn
off and the Small Cup, Small Mug and Large
Mug Buttons will illuminate. NOTE: Do not lift
Handle during this heating period.
2. Place a large mug (10 oz. minimum) on
the Drip Tray Plate.
3. Remove the Water Reservoir from brewer by
first removing Lid from Reservoir (fig. 1), then
lifting Reservoir straight up and away from
brewer (may be tight). Rinse with fresh water.
4. Fill Water Reservoir with bottled or filtered
water so that the water is to and not beyond
the MAX FILL line.
Small Mug
6
Download from Www.Somanuals.com. All Manuals Search And Download.
bottom of the K-Cup® Pack Holder. To avoid risk
of injury, do not put your fingers in the K-Cup®
Pack Holder.
NOTE: You may see small amounts of water coming from the Vent and dripping
into the Water Reservoir during this and subsequent heating – this is normal.
fig.
5
8. Lift and lower the Handle. Press the Small Mug Button to start a
cleansing brew (fig. 3). Pour the hot water into the sink.
6. Lower the Handle completely to close the Lid.
7. Select your brew size: The Small Cup choice will
yield a 5.25 oz. serving, the Small Mug will yield a
7.25 oz. serving and the Large Mug will yield a
9.25 oz. serving. NOTE: If you do not push a Brew
Button in 60 seconds, the Brew Buttons will be disabled
to prevent accidental activation. Re-activate the Brew
Buttons by lifting and lowering the Handle completely.
9. The brewer may take 15 seconds to reheat water between brews during
which time the red Heating Light may be illuminated. When the water has
heated, the red Heating Light will turn off.
10. The one-time set-up process is now complete and you are ready to brew!
ready to Brew Your First cup
8. The blue Brew Button you choose will remain
illuminated while brewing. CAUTION: There is
extremely hot water in the K-Cup® Pack Holder during
the brew process. To avoid risk of injury, do not lift the
Handle or open the K-Cup® Pack Assembly Housing
during the brew process.
1. The green Power Light will illuminate to
indicate the brewer is powered on.
fig.
4
2. Place a cup or mug on the Drip Tray Plate.
3. Lift the Handle and the K-Cup® Pack Holder
will open toward you (fig. 4).
4. Select a K-Cup® pack.
NOTE: Do not remove the
foil lid or puncture the
K-Cup® pack.
9. There may be a short pause before the brewing
process begins. The entire brew process lasts for
approximately 1 minute and ends with a burst of air
to remove all liquid from the K-Cup® pack.
5. Place a K-Cup® pack in the
K-Cup® Pack Holder (fig. 5).
10. Lift the Handle and dispose of the used K-Cup®
pack. CAUTION: K-Cup® pack will be hot.
CAUTION: There are two sharp needles
that puncture the K-Cup® pack, one above
the K-Cup® Pack Holder and the other in the
11. Enjoy your first cup of Keurig Brewed®
gourmet coffee, tea or hot cocoa!
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1 Set-Up & First Brew
Ready to Brew Your First Cup (Continued)
adding Water
12. The red Heating Light may be illuminated as the water is heated for the
next brew cycle. The brewer will be ready for use in approximately 15
seconds. NOTE: During this period, your brewer will prepare for the next
brew. The pump may make a vibrating sound. This is normal.
The blue Add Water Light will illuminate when the
water level in the Water Reservoir is low or if the
Water Reservoir has been removed (fig. 6). The
brewer will not allow you to brew when the blue Add
Water Light is illuminated.
fig.
6
Stopping the Brew Process
The Water Reservoir can be filled in two ways.
If you need to stop the brewing after the process has started, press the
Power Button to turn the brewer off. The flow of coffee, tea or hot cocoa
will stop, the heating element will shut off and the green Power Light will turn
off. NOTE: You may get less coffee, tea or hot cocoa in your cup during your next
brew. We recommend that you perform a cleansing brew after a terminated
brew. Then your NEXT brew will be the proper volume.
1. Remove the Water Reservoir Lid and pour water
directly into the Water Reservoir while it is still
attached to the brewer. Fill with water to and not
beyond the MAX FILL line. Replace the lid.
2. Remove the Water Reservoir from brewer by
first removing the Lid from the Water Reservoir,
then lifting the Water Reservoir straight up and
away from brewer. Fill with water to and not
beyond the MAX FILL line. Place the Water
Reservoir back on the brewer and replace the
Lid. IMPORTANT: Do not remove the Water
Reservoir during the brewing process.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Brewing Iced Beverages
Purging the Brewer
Your iced tea and iced coffee taste best when fresh-brewed hot over ice.
Try it by placing a tall cup filled with ice on the Drip Tray Plate (the Drip
Tray Assembly can be removed to accommodate taller cups), choose your
favorite K-Cup® pack and press your preferred brew size. Also, look for the
Brew Over Ice icon on K-Cup® packs that are specially crafted to brew
over ice! IMPORTANT: Do not brew into a cup made of glass. Doing so may
cause the glass to crack or break.
If your brewer has not been used for more than one week, you should purge
the water from the internal tank.
1. If there is water in the Water Reservoir, remove the Lid, then lift Reservoir
straight up and away from brewer. Discard water, rinse and refill with
water. Place the Water Reservoir back on the brewer and replace the
Lid. (If there is no water in Reservoir, simply refill.)
2. Be sure the brewer is turned on. Lift and lower the Handle on the brewer
without inserting a K-Cup® pack and wait until the red Heating Light
turns off.
Brewing hot Water
Your brewer is able to produce hot water for making hot cocoa in a packet,
for use in cooking, for making soups, etc. Simply raise and lower the Handle
on the brewer without adding a K-Cup® pack. The blue Brew Buttons will
flash. Be sure to have a mug or cup on the Drip Tray Plate and then press a
Brew Button. NOTE: After brewing a hot cocoa K-Cup® pack, we recommend
running a cleansing brew without a K-Cup® pack.
3. The blue Brew Buttons will flash. Be sure to have a mug or cup on the
Drip Tray Plate and then press a Brew Button.
4. Repeat steps 2 and 3 two more times to completely purge water
from internal tank.
If you are experiencing any problems with your brewer, please contact
Customer Service at 1.866.901.BREW (2739).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2
SECTION 3
Controls & Indicators (LED Control Center)
Cleaning & Maintenance
Programming auto off Timer Feature
cleaning external Parts
Set the brewer to turn off two hours after the last brew.
Regular cleaning of the brewer’s external components is recommended.
1. Press the Power Button to turn on the brewer.
1. Never immerse the brewer in water or other liquids. The Housing and other
external components may be cleaned with a soapy, damp, non-abrasive cloth.
fig.
7
2. Press the black Auto Off Button to turn on the
Auto Off Timer feature (fig. 7). The green Auto
Off Light will illuminate.
2. The Drip Tray can accumulate up to 8 oz. of overflow. The Drip Tray and
Drip Tray Plate should be periodically inspected and rinsed clean. To
remove the Drip Tray Assembly, simply slide it toward you, keeping it level
at all times to avoid spilling. The Drip Tray and Drip Tray Plate should not
be placed in the dishwasher. They should be cleaned with a damp, soapy,
non-abrasive cloth and rinsed thoroughly.
When the Auto Off Timer is enabled, your
brewer will automatically turn off two hours
after your last brew.
3. To disable the Auto Off Timer, simply press the
black Auto Off Button again and the green Auto
Off Light will turn off.
cleaning the K-cup® Pack holder assembly
1. Cleaning the Parts—The K-Cup® Pack Holder
fig.
8
Assembly can be placed onto the top shelf of a
dishwasher. NOTE: Use low temperature cycles in
the dishwasher. To remove from the brewer, lift the
Handle and grasp the top of the K-Cup® Pack
Holder with one hand while pushing up on the
bottom of the K-Cup® Pack Holder from
underneath with the other until it releases
(fig. 8). After cleaning, align the K-Cup® Pack
Holder with the opening using the two front ribs
as a guide and snap into place from the top.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Rinse the filter screen with the strong force of water from your faucet.
2. If you have a sprayer, aim the water spray at the filter screen.
3. Fill the Water Reservoir with approximately two inches of clean water and
agitate (shake) the Water Reservoir.
2.Cleaning the Funnel—The Funnel can be
removed from the K-Cup® Pack Holder by
pulling on it until it pops off (fig. 9). The Funnel
is dishwasher safe. To replace it, just snap it
back onto the K-Cup® Pack Holder Assembly.
fig.
9
Empty the Water Reservoir then fill it with clean water and return it to the
brewer. If needed, repeat above procedures. CAUTION: Please rinse the
Water Reservoir thoroughly after cleaning. This will ensure that no cleaners or
cleaning solutions remain in this area as they may contaminate the water
supply in the brewer.
3. Cleaning the Exit Needle—The Exit Needle is
located on the inside bottom of the K-Cup® Pack
Holder Assembly. Should a clog arise due to
coffee grinds, it can be cleaned using a paper
clip or similar tool. Remove K-Cup® Pack Holder
Assembly and detach Funnel. Insert the paper
clip (fig. 9) into the Exit Needle to loosen the clog
and push it out. The K-Cup® Pack Holder is
dishwasher safe. CAUTION: There are sharp
needles that puncture the K-Cup® pack above the
K-Cup® Pack Holder and in the bottom of the K-Cup®
Pack Holder. To avoid risk of injury, do not put your
fingers in the K-Cup® Pack Assembly Housing.
!
De-Scaling Your Brewer
Mineral content in water varies from place to place. Depending on the mineral
content of the water in your area, calcium deposits or scale may build up in
your brewer. Scale is non-toxic, but left unattended, it can hinder brewer
performance. De-scaling your brewer helps
maintain the heating element, and other internal
parts of the brewer that come in contact with
water.
fig.
10
The brewer should be de-scaled every 3-6
months to ensure optimal performance. It is
possible for calcium deposits to build up faster,
making it necessary to de-scale more often.
cleaning the Water reservoir & Water reservoir Lid
The Water Reservoir Lid and Water Reservoir should be periodically
inspected and cleaned.
You should promptly de-scale if the red Descale
Light is illuminated (fig. 10). However, even if the
red Descale Light is not illuminated you should
continue to de-scale your brewer every 3-6
months.
The Water Reservoir Lid or Water Reservoir should not be put into the
dishwasher. They should be cleaned with a damp, soapy, non-abrasive
cloth and rinsed thoroughly. Do not dry the inside of the Water Reservoir
with a cloth as lint may remain.
Properly follow the de-scaling procedure
described on page 12.
To clean the filter screen at the base of your Water Reservoir, empty
the Water Reservoir and follow one or all of the following procedures.
NOTE: If you are using a water filter inside the Water Reservoir, remove
it before cleaning.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3 Cleaning & Maintenance
Step 3:Repeat brew process until the blue Add Water Light is illuminated.
De-Scaling Instructions
A. PREPARE
Step 4:You may need to perform additional cleansing brews if you notice any
residual taste.
Step 1:To begin, you will need the following:
At least 48 oz. of undiluted white vinegar
Access to an empty sink
NOTE: If the red Descale Light is still illuminated after completing
the procedure, repeat the de-scaling procedure above.
A large ceramic mug (do not use a paper cup)
Service
Step 2:Empty the water from the Water Reservoir. NOTE: If you are using a
water filter inside the Water Reservoir, remove it before proceeding.
Beyond these recommended cleaning and maintenance procedures, this
brewer is not user serviceable. For service, please refer to the Warranty
section of this guide.
Step 3:Disable Auto Off feature.
B. FILL AND CLEAN
Step 1: Pour approximately 48 oz. of the vinegar into the Water Reservoir.
Fill to and not beyond the MAX FILL line.
Storage
Step 2:Place a large mug on the Drip Tray Plate and run a cleansing brew.
DO NOT USE A K-CUP® PACK, just press a Brew Button. Pour the
contents of the large mug into the sink.
Empty the Water Reservoir before storing and take care to ensure that you
store your brewer in a safe and frost free environment. Please be sure to
store your brewer in its upright position to avoid water leakage from the inner
tank. If you store the brewer in a cold environment, you run the risk of water
freezing inside the brewer and causing damage. When you prepare to use it
after storage, we recommend rinsing the Water Reservoir with fresh water
and running three cleansing brews without a K-Cup® pack.
Step 3:Repeat the brew process without a K-Cup® pack until the blue Add
Water Light illuminates.
Step 4:Now let the brewer stand for at least 4 hours while still on.
Step 5:Discard any residual vinegar and rinse the Water Reservoir thoroughly.
C. RINSE
If you plan to move your brewer to a different location, turn the brewer off,
unplug it and empty the Water Reservoir. If your brewer has been in
an environment below freezing, please be sure to let it warm to room
temperature for at least 2 hours before using.
Step 1:Ensure the Water Reservoir is filled with fresh water. Fill to and not
beyond the MAX FILL line.
Step 2:Place a large mug on the Drip Tray Plate and run a cleansing brew.
Pour the contents of the large mug into the sink.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4 Troubleshooting
SITuaTIon SoLuTIon
SITuaTIon SoLuTIon
Brewer does not • Plug brewer into an independent outlet.
have power • Check to be sure that it is plugged in securely.
• Plug into a different outlet.
Brewing a • The Exit Needle may be clogged (refer to page 11).
partial cup • Clean K-Cup® Pack Holder if necessary and rinse
under faucet (refer to page 10).
• Reset your home’s circuit breaker, if necessary.
• Make sure that the Power Button has been turned on
and the green Power Light is illuminated.
• The Water Reservoir may have been removed during
brewing. Replace the Water Reservoir and perform a
cleansing brew without a K-Cup® pack.
• If the red Descale Light is illuminated, de-scale the
brewer (refer to page 11).
• If you have repeated the de-scale procedure on
your brewer two times and it is still only brewing
a partial cup, contact Customer Service at
1.866.901.BREW (2739).
Brewer will • After placing the K-Cup® pack in the K-Cup® Pack
not brew Holder, make sure that the Handle is pushed down
securely and the blue Brew Buttons are flashing.
• If the blue Add Water Light is illuminated, add water to
Water Reservoir. Fill to and not beyond the MAX FILL
line. Make sure the Water Reservoir is seated properly
in its base.
Brewer shuts off • Check to make sure that the Auto Off Timer feature
automatically has not been enabled. If the green Auto Off Light is
illuminated, press the black Auto Off Button to disable
the Auto Off Timer feature.
• If the blue Add Water Light continues to be illuminated
even after refilling, contact Customer Service at
1.866.901.BREW (2739).
• If the blue Add Water Light, red Heating Light and
Small Mug Button are all flashing simultaneously, see
next situation.
Water appears in • It is normal for a small amount of water (less than
the Brewer base 10 ml) to collect if the Water Reservoir is not seated
with the Water for a period of time. This will not affect the operation
Reservoir removed of the brewer.
Blue Add Water • Completely remove the Water Reservoir and
Light, red Heating thoroughly clean (refer to page 11). Ensure the
Light and Small Water Reservoir is filled to and not beyond the MAX
Mug Button FILL line. Return it to the brewer and ensure it is
are all flashing seated properly, then press the flashing Small
simultaneously Mug Button.
• Use clean cloth or paper towel to absorb the water.
• Return the Water Reservoir back to the brewer base
(refer to page 6, fig. 2).
• If you have completed the above procedure two times
and the situation persists, contact Customer Service
at 1.866.901.BREW (2739).
If any problems persist, contact Customer Service at 1.866.901.BREW (2739)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5 Warranty
Limited one Year Warranty
Nor does this warranty cover damages caused by use of non Keurig Brewed®
K-Cup® brand packs or accessories, services performed by anyone other
than Keurig or its authorized service providers, use of parts other than
genuine Keurig® parts, or external causes such as abuse, misuse,
inappropriate power supply or acts of God.
Keurig, Incorporated warrants that your brewer will be free of defects in
materials or workmanship under normal home use for one year from the
date of purchase. It is recommended that you fill out and return the warranty
card enclosed with your brewer so that your purchase information will be
stored in our system. Keurig will, at its option, repair or replace a defective
brewer without charge upon its receipt of proof of the date of purchase. If a
replacement brewer is necessary to service this warranty, the replacement
brewer may be new or reconditioned. If a replacement brewer is sent, a new
limited one year warranty will be applied to the replacement brewer.
Other Limitations
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS
WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, KEURIG HEREBY
SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO
YOUR K40/K45 ELITE BREWER, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some
states or provinces do not allow disclaimers of such implied warranties or
limitations on how long an implied warranty lasts, so the above limitation
may not apply to you depending on the state or the province of purchase.
This warranty only applies to brewers operated in the United States and
Canada. This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state and, in the case of Canada, from
province to province.
Only the use of Keurig Brewed® K-Cup® brand packs and accessories will
guarantee the proper functioning and lifetime of your Keurig® brewer. Any
damage to or malfunction of your brewer resulting from the use of non
Keurig Brewed® K-Cup® brand packs and accessories may not be covered by
this warranty or may result in a service fee if the damage or malfunction is
determined to be caused by such use.
How do you obtain warranty service?
Keurig® brewers are high-quality appliances and, with proper care, are
intended to provide years of satisfying performance. However, should the
need arise for warranty servicing, simply call Keurig Customer Service at
our toll free phone number 1.866.901.BREW (2739). Please do not return your
brewer for servicing without first speaking to Keurig Customer Service to
obtain an Authorization to Return number (ATR). Keurig® brewers returned
without an ATR number will be returned to the sender without servicing.
What is not covered by the Limited Warranty?
THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL
DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER
INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH
OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces
do not allow the exclusion or limitations of incidental or consequential
damages, so the above limitation or exclusion may not apply to you
depending on the state or province of purchase.
Keurig, Incorporated
55 Walkers Brook Drive
Reading, MA 01867
1.866.901.BREW (2739)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan. click. call!
Learn more and reach us quickly without leaving home.
Scan here for videos about caring for your brewer!
have questions? We’re here to help!
Scan this QR code with your smartphone for step-by-step videos on
cleaning, de-scaling and more. Or if you prefer, you can watch the videos
Keurig is committed to your satisfaction. If you have questions, just give
us a call to have them answered quickly without leaving the comfort of
your home. 1.866.901.BreW (2739)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
P/N 60-202468-000 Rev B
02/13
Keurig, Incorporated
55 Walkers Brook Drive
Reading, MA 01867
For Household Use Only
Keurig, Incorporated is awholly-owned
© 2013 Keurig, Incorporated
All rights reserved
subsidiary of Green Mountain Coffee Roasters, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|