HANDHELD CONTROL HEAD
KCH-16
INSTRUCTION MANUAL
THANK YOU
We are grateful you have chosen Kenwood for your mobile applications.
We believe this easy-to-use handheld control head will provide dependable
communications to keep personnel operating at peak efficiency.
© B62-2101-00 (M)
•
Use of the KCH-16/ transceiver while you are driving may be
against traffic laws. Please check and observe the vehicle
regulations in your area.
Display
q Power
switch
Press to switch the transceiver ON. Press and hold for
approximately 1 second to switch the transceiver OFF.
•
Do not use options not specified by Kenwood.
w Display
e Right (Zone Up)
Press to increase the zone number (Default setting). Also press to
Only basic operations are explained in this instruction manual. For a detailed
explanation on the operations, refer to the Transceiver's instruction manual
.
key
UNPACKING AND CHECKING EQUIPMENT
Note: The following unpacking instructions are for use by your Kenwood
dealer, an authorized Kenwood service facility, or the factory.
increase setting adjustments.
FEATURES
r Left (Zone Down)
Press to decrease the zone number (Default setting). Also press to
key
•
The KCH-16 is a full-control optional microphone for use with the
TK-5710/ 5810 P25/ FM analog Dual Mode transceiver.
Indicator
Description
Carefully unpack the Handheld Control Head. We recommend that
you identify the items listed in the following table before discarding
the packing material. If any items are missing or have been damaged
during shipment, file a claim with the carrier immediately.
Displays the operating zone and channel
numbers or zone and channel names. Also
displays various text messages depending on
the function being used.
Displays various characters depending on
dealer settings.
Appears when a received call is using optional
signaling.
Appears when the Monitor function is active
and when the transceiver squelch is open.
decrease setting adjustments.
•
By connecting the KCH-16 to the optional KRK-11 handheld
control head interface kit, you can control the transceiver using
the microphone in the same way that the KCH-14/15 can be used.
t VOL (Volume) control
Rotate clockwise to increase the volume level. Rotate
counterclockwise to decrease the volume level.
Supplied Accessories
NOTICES TO THE USER
y DTMF keypad
Item
Part Number
J19-5482-XX
B62-2101-XX
Quantity
1 set
1
◆
Government law prohibits the operation of unlicensed transmitters within
the territories under government control.
Press the keys on the keypad to make DTMF calls.
The default setting is None (no function).
Hanger
(with 4 x 16 mm self-tapping screws)
◆
◆
Illegal operation is punishable by fine and/or imprisonment.
Refer service to qualified technicians only.
Instruction manual
u Up (Channel Up)
key : PF 6 (Programmable Function)
key
Appears when you are using Scan mode.
Press to increase the channel number (Default setting).
Your dealer can also enable the CH key to be used when making
setting adjustments, as an optional method for using the Right
key.
One or more of the following statements may be applicable:
FCC WARNING
SPECIFICATIONS
Appears when the external speaker function is
activated.
Appears when the Scrambler or Encryption
function is activated.
Appears when the AUX A function has been
activated.
Appears when the AUX B function has been
activated.
Appears when the AUX C function has been
activated.
Appears when using the Operator Selectable
Tone function.
Appears when there is a FleetSync message
stored in the transceiver memory. Flashes
when a new FleetSync message has arrived.
Appears when the selected zone (left icon) or
channel (right icon) is added to the scanning
sequence.
Operating temperature range
Microphone impedance
-30℃ +60℃
〜
This equipment generates or uses radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
2.2 kΩ (Max)
58 × 125 × 31.5 mm
2.3 × 4.9 × 1.2 inches
i Down (Channel Down)
key :PF 7 (Programmable
without projections
Function) key
Dimensions (W × H × D)
68 × 125 × 36 mm
2.7 × 4.9 × 1.4 inches
Press to decrease the channel number (Default setting).
Your dealer can also enable the CH key to be used when making
setting adjustments, as an optional method for using the Left
key.
with projections
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE
FCC
Cable not included Approx. 185 g / 6.5 oz
Cable included Approx. 280 g / 9.9 oz
Weight
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
o S/A/B/C/Orange (Programmable Function) keys
Press to activate their programmable functions.
The default setting is None (no function).
This equipment generates, uses and can generate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that the interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
GETTING AQUAINTED
Handheld Control Head
! TX/ BUSY indicator
12
The TX/ BUSY indicator lights red while transmitting and green
while receiving.
⑪ PTT (Push-To-Talk) switch
Appears when the Auto Recording function on
the VGS-1 option is activated.
Appears when the Auto Reply Message on the
VGS-1 option is activated. (The location of this
icon is the same as the Auto Recording icon.)
Press and hold this switch, then speak into the microphone to call
a station.
•
•
•
Reorient or relocate the receiving antenna.
HOOK
⑫
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
9
The numbers of bars indicates the strength
of incoming signals. The antenna plus 3 bars
represents a strong signal while only the
antenna represents a weak signal. No antenna
means no signal is present.
Key name (function) comparison
(in regards to the KCH-14/ KCH-15)
•
Consult the dealer for technical assistance.
10 Microphone
KCH-14
KCH-15
KCH-16
1
2
PRECAUTIONS
Observe the following precautions to prevent fire, personal injury,
and KCH-16/ transceiver damage.
GRP
GRP
GRP
(Zone Up)
Right (Zone Up)
(Zone Up)
(Zone Up)
GRP GRP
(Zone Down) (Zone Down)
Flashes when out of range.
GRP
(Zone Down)
Left (Zone Down)
•
•
•
•
•
•
Do not drop the KCH-16; strong impacts can damage the internal
components.
CH (Channel CH(Channel
Up/Down)
11
9
CH (Channel)
OPERATION
Up/Down)
Do not over stress the KCH-16 cable by pulling on it with
excessive force.
MON
(Monitor)
SCN (Scan)
PF 1
1
Hold the KCH-16 approximately 3 ~ 4 cm (1.5 inches) from your
mouth when speaking.
4
7
8
MON (Monitor)
SCN (Scan)
3
5
Do not attempt to configure the KCH-16/ transceiver while driving;
it is too dangerous.
2
To hang the KCH-16, use the hook provided on its reverse side.
PF 1 (None) PF 1 (None) S (None)
PF 2 (None) PF 2 (None) A (None)
PF 3 (None) PF 3 (None) B (None)
PF 4 (None) PF 4 (None) C (None)
PF 5 (None) PF 5 (None) Orange (None)
PF 6 (None) Up (Channel Up)
PF 2
PF 3
PF 4
PF 5
PF 6
Do not disassemble or modify the KCH-16/ transceiver for any
reason.
6
Do not expose the KCH-16/ transceiver to long periods of direct
sunlight, nor place it near heating appliances.
If an abnormal odor or smoke is detected coming from the
KCH-16 or transceiver, switch the KCH-16/ transceiver power off
immediately, and contact your Kenwood dealer.
Down (Channel
Down)
PF 7
PF 7 (None)
PF 8
PF 9
PF 8 (None)
PF 9 (None)
Download from Www.Somanuals.com. All Manuals Search And Download.
|