Kenwood TV Receiver KTC D500E User Manual

KTC-D500E  
DIGITAL TV TUNER  
INSTRUCTION MANUAL  
C B64-3808-00/00 (E)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
2WARNING  
• Mounting and wiring this product requires skills and  
experience. For safety’s sake, leave the mounting  
and wiring work to professionals.  
2CAUTION  
• Make sure to ground the unit to a negative 12V DC  
power supply.  
• Use only the screws provided or specified for  
installation. If you use wrong screws, you could  
damage the unit.  
• If your vehicle’s ignition does not have an ACC  
position, or if the ignition wire is connected to  
a power source with constant voltage such as a  
battery wire, the power will not be linked with the  
ignition (i.e., it will not turn on and off along with  
the ignition). If you want to link the unit’s power  
with the ignition, connect the ignition wire to a  
power source that can be turned on and off with  
the ignition key.  
• If the fuse blows, first make sure the wires aren’t  
touching to cause a short circuit, then replace the  
old fuse with one with the same rating.  
• After the unit is installed, check whether the brake  
lamps, blinkers, wipers, etc. on the car are working  
properly.  
English  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
This Product is not installed by the manufacturer  
of a vehicle on the production line, nor by the  
professional importer of a vehicle into an EU Member  
State.  
Monitor units that can be connected to this  
unit  
Å group  
DNX7200  
KVT-829DVD  
KVT-729DVD  
DDX8029  
DDX7029  
KOS-V500  
Information on Disposal of Old Electrical  
and Electronic Equipment (applicable for  
EU countries that have adopted separate  
waste collection systems)  
Products with the symbol (crossed-out  
wheeled bin) cannot be disposed as  
household waste.  
KOS-V1000  
ı group  
DDX6029  
KVT-827DVD  
KVT-727DVD  
KVT-627DVD  
DDX8027  
DDX6027  
KVT-M707  
Ç group  
LZ-760R  
Old electrical and electronic equipment  
should be recycled at a facility capable  
of handling these items and their waste  
byproducts. Contact your local authority  
for details in locating a recycle facility  
nearest to you. Proper recycling and waste  
disposal will help conserve resources whilst  
preventing detrimental effects on our  
health and the environment.  
Î group  
Unit with RCA video input  
How to reset your unit  
• If the unit fails to operate properly, press the Reset  
button.  
4
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Lets view some digital broadcasts.  
A
A
B
B
C
Switching to Digital  
TV Screen  
Functions During Digital  
TV Screen  
Press [V.SEL] on the monitor to switch to Digital  
TV Broadcasting.  
Basic functions are available even when the TV  
screen is displayed.  
1
2
4
5
3
Preset  
Mode : Fu l l  
3
TV TV1  
2ch  
AV-IN  
AUTO1  
AV-OUT:  
6
1 Picture Source Display Area  
Displays the TV Status, Display Mode, and  
AVOUT settings (page 13).  
2 Channel Down Search Area  
TV  
TV1  
2ch  
IN  
AF  
AUTO1  
Searches downward and selects the  
channel.  
3 Channel Up Search Area  
Searches upward and selects the channel.  
4 Menu Control Area (Å group only)  
Displays the Menu Control screen (page 11).  
5 Information Display Control Area  
Turns ON/OFF the display of information  
in the Picture Source Display Area 1 and  
Source Information Display Area 2.  
6 Audio Source Information Display Area  
When you first switch to digital TV broadcasting, a  
Welcome Menu appears and Auto Scan starts.  
There are four ways to select the desired station.  
When Auto Scan ends normally, a Channel List  
containing channels available at the current location is  
created and the first channel is displayed.  
- By searching for available station  
- By selecting from EPG (Electronic Program Guide) (page  
10)  
Auto Scan may have been performed already at the  
dealer where the unit was installed.  
The display language can be changed (page 13).  
- By selecting from the Channel List (page 12)  
- By specifying a channel number (page 11)  
You can add the selected channel to the Channel List if it  
is not already listed.  
English  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
A
C
Touch Operation  
Functions During Digital  
TV Screen  
Menu Control Screen appears by touching the  
area shown below.  
Basic functions are available even when the TV  
screen is displayed.  
1
3
2
6
1
2
3
MenuCtrl  
EPG  
Menu  
Return  
1 Channel Down Search Area  
Searches downward and selects the  
channel.  
6
6
2 Control Screen Display Area  
Switches to Control Screen.  
3 Channel Up Search Area  
Searches upward and selects the channel.  
4
6
5
Enter  
Exit  
1 Shows EPG Screen (page 10).  
2 Shows DVB Menu Screen (page 11).  
3 Returns to previous screen.  
4 Executes selected menu item.  
5 Returns to Digital TV Screen.  
6 Moves highlight in DVB menu.  
When the Control Screen is displayed, touch [OK] or wait  
approximately 10 seconds. The Digital TV Screen will  
reappear.  
RCU  
[List of abbreviations]  
Remote Control Unit  
CH  
Channel  
STB  
Set Top Box  
EPG  
Normally this will be built in to the vehicle and it  
will not be necessary for the user to access it.  
Electronic Program Guide  
OSD  
On Screen Display  
TV  
Television  
PIG  
Picture in Graphic  
6
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation (When connected with DDX7029 Å)  
Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the  
optional accessory Digital TV Tuner connected.)  
Functions When Displaying the Easy  
Control Panel  
Functions While Displaying the Control  
Screen  
Displays a floating control panel in the screen.  
Switches to control screen to use various playback  
functions.  
TV  
2ch  
AV-IN  
Mode : Fu l l  
AV-OUT:  
TV  
2ch  
AV-IN  
Mode : Fu l l  
AV-OUT:  
TV  
2ch  
IN  
TV  
2ch  
IN  
SRC  
SRC  
TV  
2ch  
AV-OUT: AV-IN  
SCRN  
Mode : Fu l l  
TV  
2ch  
AV-OUT: AV-IN  
SCRN  
3
Mode : Fu l l  
1
2
2
SRC  
TV  
2ch  
IN  
SRC  
TV  
2ch  
IN  
1 Switches the source.  
2 Select a channel.  
SRC  
3 Displays the Screen Control screen.  
(page 7 for the <Functions While Displaying  
the Control Screen>)  
TV  
The Easy Control Panel display is hidden when you touch  
2ch  
1
2
a central area of the monitor.  
1
IN  
LOUD  
1 Select a channel.  
2 Channel Number Display  
English  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation (When connected with DDX6029 ı)  
Various control screens appear in the Digital TV/ Video Source mode. (You can only operate Digital TV with  
the optional accessory Digital TV Tuner connected.)  
Displaying the Easy Control Panel  
Displaying the TV Control screen  
The Control Panel is displayed in a floating  
position of the TV picture.  
You can tune in a TV station using various  
functions.  
SRC  
SRC  
T V 1  
P r e s e t  
MODE:FULL AV-OUT:DVD  
1
2 c h  
T V  
13:50  
4
VIDEO  
1
3
2
5
5
4
SCRN  
TV  
2 c h  
Next  
AME SEEK  
T V 1 G ro u p 1 P r e s e t  
1
1
2
3
3
SEEK  
2 c h  
SRC  
VID  
G r o u p 1  
T V  
TV  
P r e s e t  
1
AUTO1  
1 Calls the Sound Effects Menu.  
1 Switches the source.  
2 Switches to Video (VIDEO).  
3 Select a channel.  
4 Displays the Screen Control screen.  
(page 8 for the <Displaying the TV Control  
screen>)  
2 Displays the Source Select screen.  
3 Calls the Setup Menu.  
4 Switches to VIDEO.  
5 Select a channel.  
Buttons other than mentioned above are disabled in DVB  
mode.  
The Easy Control Panel display is hidden when you touch  
a central area of the monitor.  
Buttons other than mentioned above are disabled in DVB  
mode.  
8
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation (When connected with LZ-760R Ç)  
Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the  
optional accessory Digital TV Tuner connected.)  
Functions While Displaying the Control  
Screen  
You can tune in a TV station using various  
functions.  
1
1
2
1 Select a channel.  
2 Closes Control Screen and shows Digital TV  
screen.  
Buttons other than mentioned above are disabled in DVB  
mode.  
English  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying EPG  
Receiving and displaying EPG (Electronic Program Guide) sent together with a program.  
Viewing the Program Guide  
You can check the programs on each channel in the  
EPG (Electronic Program Guide).  
1
2
Show EPG by pressing [EPG] key  
EPG appears.  
Select the channel or time to display  
On the EPG, you can change the displayed  
channel by touching [5] or [] and time frame  
by touching [2] or [3].  
3
Touch [Return] (  
) when you are finished  
A "no data" message will be displayed if the selected  
channel does not provide EPG data.  
It can also be displayed from the Menu Control screen.  
10  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Search and Channel List  
The available stations (TV/Radio) are saved in the Channel List.  
Searching for currently available station  
(Auto Scan)  
Manually Searching Station  
(Manual Search)  
Search for currently available stations and save  
them in the Channel List.  
Search a station by specifying area or channel.  
1
2
Show DVB Menu by pressing [MENU] key  
1
2
Show DVB Menu by pressing [MENU] key  
Touch [5] or [], select [Channel Search]  
Touch [5] or [], select [Channel Search]  
3
4
5
6
Touch [3]  
3
4
5
Touch [3]  
Touch [5] or [], select [Manual Search]  
Touch [5] or [], select [Auto Scan]  
Touch [Enter] (  
)
Touch [Enter] (  
)
Touch [5], [], [2], or [3] to select TP  
Number, bandwidth, frequency, or CH  
number  
Channel search is performed and the available  
channel is saved in the channel list.  
When you perform Auto Scan, the content of the current  
channel list is discarded and a new list is created.  
To search for available channels without discarding the  
content of the current channel list, perform channel  
search from the Digital TV Screen (page 5).  
Manual search is for advanced users and offers the  
ability to search for specific channels. Regular users are  
recommended to use "Auto Scan" (page 11).  
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Search and Channel List  
Selecting a station from Channel List  
Erasing Channel List  
Stations that are available by Auto Scan or other  
methods are saved in the Channel List.  
Erase channels registered in the Channel List.  
1
2
Show DVB Menu by pressing [MENU] key  
1
2
Show DVB Menu by pressing [MENU] key  
Touch [5] or [], select [CH Manager]  
Touch [5] or [], select [CH Manager]  
3
4
Touch [3]  
3
4
Touch [3]  
Touch [5] or [], select [Erase All  
Channels]  
Touch [5] or [], select [TV Channel List]  
or [Radio Channel List]  
5
6
Touch [Enter] (  
)
5
Touch [Enter] (  
)
A confirmation message appears.  
The Channel List appears and the program of  
the currently selected station appears in the  
PIG (Picture in Graphic) screen. In addition  
Channel Information is shown underneath the  
PIG screen.  
Touch [Enter] (  
)
6
Touch [5] or [] to select a channel  
All channels in the Channel List are erased.  
After Deleting all the Channels pressing TV Channel List  
or Radio Channel List will cause a message box to be  
displayed: No TV Channel List or No Radio Channel List.  
When you move the cursor down the channel  
list, the PIG screen will change accordingly.  
7
Touch [Enter] (  
)
The received channel is switched.  
12  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Setting this unit's behavior and clock.  
1
2
Show DVB Menu by pressing [MENU] key  
System Setup  
Set the behavior of this unit such as the display  
language and aspect ratio.  
Touch [5] or [], select [Setup]  
The following items can be set:  
OSD Language  
User could select the desired language.  
This function provides 4:3 and 16:9 two ratio  
for user to select. If your display supports 16:9  
screen format and selected channel provides  
16:9 format program, select 16:9.  
TV Aspect Ratio  
There are four screen format could be selected,  
Full, Pan&Scan, Letter Box, and Combined.  
TV Screen Format  
User could set the auto switching interval time  
from OFF to 30 Seconds when the box cannot  
receive the video signal. User also could use the  
[A] to [Z] key on the RCU to switch the signal  
immediately.  
3
4
5
Touch [3]  
Auto Switching  
Interval  
Touch [5] or [], select [System Setting]  
Select the TV signal type (PAL or NTSC)  
according to the display.  
Touch [Enter] (  
)
TV Type  
0/5 Volt  
System Setup Menu appears.  
Set "0/5 Volt" ON when connecting an antenna  
with booster amplifier to this unit.  
6
7
Touch [5] or [] to select the item to set  
This function provide user to select the unit at a  
power on mode or a stand by mode. If the user  
select the unit at power on mode, when user  
turn on the car, then the unit will be turned on  
at the same time.  
Touch [2] or [3] to select the value to set  
Power On Option  
If user connect to an amplifier, user could use  
Volume Rate Control the volume rate to control the volume. There  
are 18 levels could be selected.  
Depending on the country where you buy your receiver,  
some functions might not be available in this menu.  
If you changed the "0/5 Volt" setting, perform Auto Scan.  
8
Touch [Return] (  
) when you are finished  
English  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Setting the Clock  
Updating the Software  
Set the clock to the network. Also set the time  
zone and summer time as necessary.  
Download the new software from the network  
and update the software installed in this unit.  
1
2
Show DVB Menu by pressing [MENU] key  
1
2
Show DVB Menu by pressing [MENU] key  
Touch [5] or [], select [Setup]  
Touch [5] or [], select [Setup]  
3
4
5
Touch [3]  
3
4
Touch [3]  
Touch [5] or [], select [Clock Setting]  
Touch [5] or [], select [Software  
Upgrade]  
Touch [Enter] (  
)
5
Touch [Enter] (  
)
Clock Setting menu appears.  
If there is a new software, it is downloaded and  
this unit's software is updated.  
6
Touch [2] or [3] to select the value to set  
This function is only available when the network  
supports this feature.  
When new software is loaded, this might have different  
functions than the software you are using now. This  
manual might not be accurate anymore for the new  
software version.  
7
Touch [Return] (  
) when you are finished  
Real-time data (Year, Month, Date, and Hour) will  
automatically be downloaded when the Clock Setting  
Menu is shown.  
14  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restoring to Factory Default  
Restore this unit's settings to factory default.  
1
2
Show DVB Menu by pressing [MENU] key  
Touch [5] or [], select [Setup]  
3
4
Touch [3]  
Touch [5] or [], select [Factory Default]  
A confirmation message appears.  
5
Touch [2] or [3] to show [OK]  
6
Touch [OK]  
English  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information and Conax  
Displaying information and setting Conax.  
Displaying Information  
Setting CA Control  
Display various system information, smart card  
expiration date, and Conax information.  
Set channel access control (CA Control) for  
channels broadcasting programs of specific  
genre.  
1
2
Show DVB Menu by pressing [MENU] key  
1
2
Show DVB Menu by pressing [MENU] key  
Touch [5] or [], select [Info & Conax.]  
Touch [5] or [], select [Info & Conax.]  
3
4
Touch [3]  
3
4
5
Touch [3]  
Touch [5] or [] to select the information  
to display  
Touch [5] or [], select [CA Control]  
5
Touch [2] or [3]  
Touch [Enter] (  
)
CA Control screen appears.  
6
Touch [5] or [] to select an item and  
enter a value  
The selected information is displayed.  
7
Touch [Enter] (  
)
16  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This function is not available unless a card is inserted.  
You can change the [Card Level] by touching [2] or [3].  
However, you must enter a password when [Enter CA PIN:]  
appears to change the Card Level setting.  
To change the password, enter the current password for  
[Enter CA PIN:] and new password for [Enter New CA PIN:]  
and [Confirm new CA PIN:].  
English  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Unit  
EPG  
INFO  
MUTE  
POWER  
SUB  
TITLE  
MENU  
TV/RADIO  
EXIT  
LANG  
TIMER  
AUDIO  
PREVIEW  
A
Z
AUTO  
SCAN  
SIGNAL  
%
INFO  
5/∞  
Current channel info (toggle between pages in  
menu using 5//2 / 3).  
a. Changes channels (channel up, channel  
down).  
b. Toggles between menu items (up/down).  
EPG  
Opens the Electronic Program Guide.  
2/3  
Toggles between menu items (left/right).  
POWER  
Powers the (STB) unit on and off.  
OK  
Verifies input.  
MUTE  
Mutes the sound. Volume mute only works  
in TV/Radio mode (i.e. not when a menu is  
opened).  
EXIT  
a. Return to the previous menu in menu screen  
or escape from menu.  
b. Return to normal TV mode from a menu.  
Repeated pressing will take you through  
all opened menus until normal TV mode is  
reached.  
MENU  
Press once to enter Main Menu.  
The Main Menu consists of 4 sub-menus.  
CH Manager  
Channel Search  
Setup  
SUBTITLE  
Switches to Subtitle Mode.  
Info & Conax.  
18  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading battery  
Page up  
Use one lithium battery (CR2025).  
Insert the batteries with the + and – poles aligned  
properly, following the illustration inside the case.  
a. TV/radio mode  
b. Page down  
3 Replace the battery  
LANG  
BA  
T
TR  
BA  
Y
T
BA  
T
BA  
TR  
Y
TR  
Y
T
TR  
BA  
Switches language.  
TIMER  
Sleep timer.  
1 Keep on slide  
Press to set different times.  
AUDIO  
Audio modes.  
2 Pull out  
2WARNING  
Store unused batteries out of the reach of children.  
Contact a doctor immediately if the battery is  
accidentally swallowed.  
Switches to teletext.  
0 – 9  
¤
a. Selects a channel to watch. Press two  
numbers one after the other to go beyond 9  
(e.g. press 2 and then 3 to go to channel 23).  
Do not set the remote control in hot places such as on  
the dashboard.  
b. Selects a sub-menu item.  
38  
Pauses/resumes TV streaming images.  
Returns to the channel you were watching  
previously.  
PREVIEW  
Previews image display.  
A-Z  
Changes to alternative frequency.  
AUTOSCAN  
Searches the network for available channels.  
SIGNAL%  
Signal power/quality bar  
English  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
List of Accessories  
4 Remote Control  
1 Digital TV Tuner............... 1  
5 TV Interface Cable......... 1  
9 Screw (ø4×16mm)........ 4  
2 Remote Control Unit... 1  
3 Wiring harness................. 1  
Receiver .................................1  
6 Bracket.................................. 2  
7 Card Slot Cover ............... 1  
8 Screw (M3×4mm)............6  
20  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Digital TV Tuner  
The Digital TV Tuner (main unit) can be installed by securing it to the pile carpet with Velcro or by screwing  
it on to a commercially available audio board.  
Installing the Main Unit  
• There are various terminals on the main unit. Leave  
some space to connect cables on the terminal side  
of the main unit.  
• Do not place anything on top of the main unit. This  
can cause product failure.  
• Do not install the main unit stacked with other  
units.  
• Install the main unit at least 1.5m away from radio  
antenna.  
Installing with Screw  
Screw (M3×4mm) 8  
1
Use a tapping screw to secure the bracket to the  
vehicle's audio board (commercial product).  
Screw (ø4×16mm) 9  
¤
When drilling holes in the vehicle, be sure there is  
nothing on the other side.  
Bracket 6  
Bracket 6  
Damage to cables or pipes can cause accident or  
malfunction.  
Screw  
(M3×4mm) 8  
Digital TV Tuner 1  
Audio board  
(commercial product)  
English  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Connecting the Remote Control Receiver  
Paste the remote control receiver to the dashboard.  
1
2
Remove the paper from double-stick tape  
and paste it on the back of the remote control  
receiver.  
Remote control receiver 4  
Wipe the dirt and oil off from the installation area  
and paste the remote control receiver 6 to the  
dashboard.  
3
Connect the connectors of the remote control  
receiver to the main unit.  
Wipe oil and dirt off from the installation surface.  
Avoid area where there is direct sunlight or close to TV  
monitor because the remote control signals may be  
affected.  
Remote control  
receiver 4  
Digital TV Tuner 1  
22  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting Pay Card  
Insert the Pay Card into the card slot, and attach  
the card slot cover.  
Screw (M3×4mm) 8  
Card Slot Cover 7  
Digital TV Tuner 1  
English  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection  
Connect the monitor and power as follows.  
Set S position when connecting  
by AV Cable (RCA).  
Set C position when connecting by  
Kenwood TV Interface Cable.  
To AV input of the monitor Î  
Digital TV Tuner 1  
Ground wire (Black) - (To car chassis)C  
Fuse (5A)  
Battery wire (Yellow) B  
Fuse (3A)  
Ignition wire (Red)  
A  
To the center unit  
such as a DVD  
receiver. ÅıÇ  
Wiring harness 3  
• 75Ω  
• F connector  
• For VHF/UHF  
TV Interface Cable 5  
Connection of antenna with booster  
amplifier  
Set "0/5 Volt" ON when connecting an  
antenna with booster amplifier to this unit.  
Ignition key switch  
ACC A  
B
Car fuse box  
(Main fuse)  
Car fuse box  
C
+
+
Battery  
24  
KTC-D500E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
TV tuner  
Input Frequency  
VHF : 174 – 230 MHz  
UHF : 470 – 862 MHz  
Demodulation Type  
: QPSK/ 64QAM/ 16QAM  
Channel Bandwidth  
: 6/ 7/ 8 MHz  
FFT Size  
: 2K and 8K  
Guard Interval  
: 1/4, 1/8, 1/16, 1/32  
Puncture Rate  
: 1/2, 2/3, 3/4, 5/6, 7/8  
Antenna input  
: 2-ch Diversity  
Connector Type  
: F Type × 2  
General  
Operating Voltage (11 – 16V)  
: 14.4 V  
Current Consumption  
: 860 mA  
Dimensions (W × H × D) (Main unit)  
: 215 × 37 × 172.4 mm  
Operational temperature range  
: -10°C ~ +60 °C  
Storage temperature range  
: -30°C ~ +85 °C  
Weight  
: 1.2 kg  
English  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Marine Sanitation System LP3005 1 User Manual
Intel Computer Hardware 915GM User Manual
Intel Home Theater Server IP Media Server User Manual
Intel Server 320014 003US User Manual
JVC CRT Television AV29BA16 AV29MT16 AV29ST16 AV29VT16 AV21BA16 AV21MT16 AV21VT16 AV29BA16 AV29MT16 AV29ST16 AV29VT16 AV21BA16 AV21MT16 AV25MT16 User Manual
JVC Flat Panel Television SU LT 26E70BU User Manual
Keating Of Chicago Fryer 20 BB Gas User Manual
Kenwood CD Player DPF J7020 User Manual
KitchenAid Ice Maker KUIS155HLS2 User Manual
KitchenAid Refrigerator NL240V User Manual