Kenwood Stereo System KDV C820 User Manual

DVD/CD-MP3 AUTO CHANGER  
KDV-C810  
KDV-C820  
KDV-C830  
KDV-C840  
KDV-C860  
INSTRUCTION MANUAL  
This player has been designed to play back the DVD  
software which has been encoded for specific region areas.  
It cannot play back the DVD software encoded for other  
region areas than the region areas for which it has been  
designed.  
Take the time to read through this instruction manual.  
Familiarity with installation and operation procedures will help you obtain the  
best performance from your new DVD/CD-MP3 auto changer.  
For your records  
Record the serial number, found on the back of the unit, in the spaces designated on  
COMPACT  
the warranty card, and in the space provided below. Refer to the model and serial  
numbers whenever you call upon your KENWOOD dealer for information or service  
on the product.  
DIGITAL VIDEO  
Model KDV-C810 Serial number  
© B64-2291-00/03 (K/E/M/X/C)  
2RR6P10A12900A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2Warning  
NOTE  
2CAUTION  
This equipment has been tested and found to  
comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide  
Use of controls or adjustments or performance  
of procedures other than those specified  
herein may result in hazardous radiation  
exposure.  
In compliance with Federal Regulations,  
following are reproductions of labels on, or  
inside the product relating to laser product  
safety.  
reasonable protection against harmful  
interference in a residential installation. This  
equipment may cause harmful interference to  
radio communications, if it is not installed and  
used in accordance with the instructions.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-CHO,  
HACHIOJI-SHI  
TOKYO, JAPAN  
KENWOOD CORP. CERTIFIES THIS EQUIPMENT  
CONFORMS TO DHHS REGULATIONS N0.21 CFR  
1040. 10, CHAPTER 1, SUBCHAPTER J.  
encouraged to try to correct the interference  
by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
Location : Bottom Panel  
• Increase the separation between the  
equipment and receiver.  
FCC WARNING  
• Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced  
radio/TV technician for help.  
This equipment may generate or use radio  
frequency energy. Changes or modifications to  
this equipment may cause harmful  
interference unless the modifications are  
expressly approved in the instruction manual.  
The user could lose the authority to operate  
this equipment if an unauthorized change or  
modification is made.  
NOTE  
This Class B digital apparatus complies with  
Canadian ICES-003.  
— 3 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
• Do not use your own screws. Use only the  
screws provided. If you use the wrong  
screws, you could damage the unit.  
IMPORTANT INFORMATION  
2WARNING  
You can enjoy a DVD with this unit alone when  
connecting it to an external monitor or audio  
equipment.  
Also, you can operate this unit connected to a  
center unit made by Kenwood to output  
sound.  
A Kenwood-made center unit that can be  
connected to this unit is called “Center Unit”.  
About a center unit that can be  
connected to this unit:  
If a center unit (such as CD receivers) has  
capability for “N” of <“O-N” switch>, this unit  
can be connected to this unit.  
According to the operating instructions of a  
center unit, the setting of <“O-N” switch> is  
“N”. This unit is, however, exclusive to “N”.  
Therefore, <“O-N” switch> is unnecessary.  
If using a separate CD/MD changer switching  
unit "KCA-S210A", AUX audio input is enabled  
also on a disc changer control equipped center  
unit not compatible with "N". In this case, this  
unit cannot be operated on the center unit.  
For connections to this unit, refer to "When  
your car audio has RCA input" (page 32).  
To prevent injury or fire, take the  
following precautions:  
• When extending the ignition, battery, or  
NOTE  
ground wires, make sure to use automotive-  
2
• If you experience problems during  
installation, consult your Kenwood dealer.  
grade wires or other wires with a 0.75mm  
(AWG18) or more to prevent wire  
deterioration and damage to the wire  
coating.  
• The illustrations of the display and the panel  
appearing in this manual are examples used  
to explain more clearly how the controls are  
used. Therefore, what appears on the display  
in the illustrations may differ from what  
appears on the display on the actual  
equipment, and some of the illustrations on  
the display may represent something  
impossible in actual operation.  
To prevent a short circuit, never put or leave  
any metallic objects (such as coins or metal  
tools) inside the unit.  
• If the unit starts to emit smoke or strange  
smells, turn off the power immediately and  
consult your Kenwood dealer.  
2CAUTION  
The marking of products using lasers  
(Except for some areas)  
To prevent damage to the unit, take  
the following precautions:  
• Make sure to ground the unit to a negative  
12V DC power supply.  
• Do not open the top or bottom covers of the  
unit.  
• Do not install the unit in a spot exposed to  
direct sunlight or excessive heat or humidity.  
Also avoid places with too much dust or the  
possibility of water splashing.  
• When replacing a fuse, only use a new one  
with the prescribed rating. Using a fuse with  
the wrong rating may cause your unit to  
malfunction.  
CLASS 1  
LASER PRODUCT  
The label is attached to the chassis/case and  
says that the component uses laser beams  
that have been classified as Class 1. It  
means that the unit is utilizing laser beams  
that are of a weaker class. There is no  
danger of hazardous radiation outside the  
unit.  
For details of connection, refer to the  
operating instructions attached to KCA-S210A.  
The functions available and/or information  
displayable may depend on types of units to  
which you connect.  
To prevent a short circuit when replacing a  
fuse, first disconnect the wiring harness.  
— 4 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do Not Load 3-in.(8cm) Discs  
This player has been designed to play  
back the DVD software which has  
been encoded for specific region  
areas. It cannot play back the DVD  
software encoded for other region  
areas than the region areas for which  
it has been designed. (page 39)  
Unplayable discs  
This player cannot play back any of the  
If you try to load a 3 in.(8cm) Disc with its  
adapter into the unit, the adapter might  
separate from the Disc and damage the unit.  
following discs.  
• DVD-ROM discs  
• DVD-R/DVD-RW/DVD-RAM discs  
• SVCD/HQVCD discs  
• VSD discs  
• CDV discs (Only the audio part can be  
reproduced.)  
• CD-G/CD-EG/CD-EXTRA discs (Only the  
audio can be reproduced.)  
Cleaning the Unit  
If the front panel is dirty, wipe it clean with a  
silicon cloth or soft dry cloth with the power  
off.  
The KDV-C810 will playback any disc  
1
ALL  
whose region number is  
(or  
).  
Applying spray cleaner directly to the unit may  
affect its mechanical parts. Wiping the  
faceplate with a hard cloth or using a volatile  
liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
The KDV-C820 will playback any disc  
• Photo CD discs (Never attempt to play  
them.)  
2
ALL  
whose region number is  
(or  
).  
The KDV-C830 will playback any disc  
ALL  
whose region number is  
(or  
).  
Lens Fogging  
The KDV-C840 will playback any disc  
This product incorporates copyright  
4
ALL  
whose region number is  
(or  
).  
Right after you turn on the car heater in cold  
weather, dew or condensation may form on  
the lens in the Disc player of the unit. Called  
lens fogging, Discs may be impossible to play.  
In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit  
still does not operate normally after a while,  
consult your Kenwood dealer.  
protection technology that is protected by  
method claims of certain U.S. patents and  
other intellectual property rights owned by  
Macrovision Corporation and other rights  
owners. Use of this copyright protection  
technology must be authorized by  
The KDV-C860 will playback any disc  
ALL  
whose region number is  
(or  
).  
Restrictions due to difference between  
discs  
Some DVD and VCD discs can be played only  
in certain playback modes according to the  
intentions of the software producers. As this  
player plays discs according to their  
intentions, some functions may not work as  
intended by you. Please be sure to read the  
instructions provided with each disc. When  
an inhibition icon is displayed on the monitor,  
it indicates that the disc being played is under  
the restriction as described above.  
Macrovision Corporation, and is intended for  
home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or  
disassembly is prohibited.  
Manufactured under license from Dolby  
Laboratories.  
“ Dolby ” and the double-D symbol are  
trademarks of Dolby Laboratories.  
Confidential Unpublished Works. ©1992-  
1997 Dolby Laboratories, Inc. All rights  
reserved.  
Inhibition icon  
“DTS” and “DTS Digital Out” are  
trademarks of Digital Theater Systems, inc.  
— 5 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Discs  
Handling Discs  
• Don’t touch the recording surface of the  
Disc.  
Disc cleaning  
Clean from the center of the disc and move  
outward.  
Icons on the DVD discs  
Indicates the region code where  
the disc can be played.  
ALL  
Number of voice languages  
recorded with the audio  
function. The number in the icon  
indicates the number of voice  
languages. (Max. 8 languages)  
8
Removing Discs  
When removing Discs from this unit pull them  
• CD-R and CD-RW are easier to damage than  
a normal music CD. Use a CD-R or a CD-RW  
after reading the caution items on the  
package etc.  
• Don’t stick tape etc. on the Disc.  
Also, don’t use a Disc with tape stuck on it.  
Number of subtitle languages  
recorded with the subtitle  
function. The number in the icon  
indicates the number of subtitle  
languages. (Max. 32 languages)  
out horizontally.  
32  
Discs that can’t be used  
• Discs that aren’t round can’t be used.  
Number of angles provided by  
the angle function. The number  
in the icon indicates the number  
of angles. (Max. 9 angles)  
When using a new Disc  
9
If the Disc center hole or outside rim has  
burrs, use it after removing them with a ball  
pen etc.  
Aspect ratios that can be  
selected. “LB” stands for Letter  
Box and “PS” for Pan/Scan. In  
the example on the left, the 16:9  
video can be converted into  
letter box video.  
16:9 LB  
• Discs with coloring on the recording surface  
or that are dirty can’t be used.  
• A CD-R or CD-RW that hasn’t been finalized  
can’t be played. (For the finalization process  
refer to your CD-R/CD-RW writing software,  
and your CD-R/CD-RW recorder instruction  
manual.)  
Burrs  
Burrs  
Disc storage  
• Don’t place them in direct sunlight (On the  
seat or dashboard etc.) and where the  
temperature is high.  
• Store Discs in their cases.  
DVD/CD accessories  
Don’t use disc type accessories.  
— 6 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on playing MP3  
This unit can play MP3(MPEG1, 2 Audio Layer 3). Note, however,  
that the MP3 recording media and formats acceptable are limited.  
When writing MP3, pay attention to the following restrictions.  
A file with a name entered with characters not on the code list  
may not play correctly.  
Writing files into a medium  
Acceptable media  
When a medium containing MP3 data is loaded, the unit checks all the  
data on the medium. If the medium contains a lot of folders or non-  
MP3 files, therefore, it takes a long time until the unit starts playing  
MP3.  
The MP3 recording media acceptable to this unit are CD-ROM, CD-R,  
and CD-RW.  
When using CD-RW, do full format not quick format to prevent  
malfunction.  
In addition, it may take time for the unit to move to the next MP3 file  
or a Track Search or Disc Search may not be performed smoothly.  
Acceptable medium formats  
Loading such a medium may produce loud noise to damage the speakers.  
• Do no attempt to play a medium containing a non-MP3 file with the  
MP3 extension.  
The unit mistakes non-MP3 files for MP3 data as long as they have  
the MP3 extension.  
The following formats are available for the media used in this unit. The  
maximum number of characters used for file name including the  
delimiter (".") and three-character extension are indicated in  
parentheses.  
• ISO 9660 Level 1 (12 characters)  
• ISO 9660 Level 2 (31 characters)  
• Joliet (64 characters; up to 19 characters are displayed on this unit)  
The media reproducible on this unit has the following limitations:  
• Maximum number of directory levels: 8  
• Do not attempt to play a medium containing non MP3.  
MP3 playing order  
When selected for play, Track Search, or for Folder Select, files and  
folders are accessed in the order in which they were written by the CD  
writer.  
• Maximum number of files per folder: 255  
Because of this, the order in which they are expected to be played  
may not match the order in which they are actually played. You may be  
able to set the order in which MP3 are to be played by writing them  
onto a medium such as a CD-R with their file names beginning with  
play sequence numbers such as "01" to "99", depending on your CD  
writer.  
• Maximum number of characters for folder name: 64 (up to 19  
characters are displayed on this unit)  
• Maximum number of folders: 50  
MP3 written in the formats other than the above may not be  
successfully played and their file names or folder names are not  
properly displayed.  
When a Track Search is executed with file  
Settings for your MP3 encoder and CD writer  
Root  
¡$ being played ...  
Folder  
When you use your CD writer to record MP3 up to the maximum disc  
capacity, disable additional writing. For recording on an empty disc up  
to the maximum capacity at once, check Disc at Once.  
File  
Operation of the button  
¢ Button  
Current  
file number  
4 Button  
Beginning of file  
Entering file and folder names  
When entering file and folder names, use the alphanumeric characters  
described above only. (ASCII code: 0x20 – 0x7f)  
If you use any other character for entry, the file and folder names are  
not displayed correctly. They may neither be displayed correctly  
depending on the CD writer used.  
When an Folder select is executed with file ¡$  
being played ...  
Operation of the button  
Current  
folder number  
Level 1  
Level 3  
DISC– Button  
DISC+ Button  
Level 2  
Level 4  
The unit recognizes and plays only those MP3 which have the MP3  
extension (.MP3).  
— 7 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
DVD: Digital Versatile Disc  
Title number (DVD)  
A type of disc which contains recording of audio/video packaged  
media with high video and audio quality, such as a movie,  
featuring large recording capacity and digital signal processing  
capability.  
The title is the largest unit of video and audio recorded in a DVD.  
It usually corresponds to a single movie of video software or an  
album (sometimes a piece of music) of music software. The  
numbers assigned to individual titles are referred to as the title  
numbers.  
VIDEO CD (VCD)  
A type of CD which contains the recording of moving images. It  
compresses image information by about 1/120 and audio  
information by about 1/6 and accommodates up to 74 minutes of  
recording in a disc with the same diameter as ordinary music CD  
of 12 cm.  
Chapter number (DVD)  
The chapter is a section of video and audio recorded in a DVD. A  
title is composed of several chapters. The numbers assigned to  
individual chapters are referred to as the chapter numbers.  
Track number (CD, VCD)  
Some VCDs do not have the P.B.C. compatibility and are capable  
of playback only, while some are P.B.C.-compatible and are  
capable of various special playback control operations. This player  
can play both of these VCDs.  
MPEG: Moving Picture Expert Group (DVD, VCD)  
This is an international standard for digital video and audio  
compression and decompression in media.  
A track is also a section of video and audio recorded in a disc. The  
numbers assigned to individual tracks are referred to as the track  
numbers.  
With most of music Discs, a track is assigned to a piece of music.  
However, with a VCD, the sections of the contents do not always  
correspond to the assigned tracks.  
As (special) playback functions such as skipping and programming  
of ordinary Discs are based on track number data, such playback  
functions are sometimes impossible with some VCDs.  
Dolby Digital  
This is a digital audio compression technology developed by Dolby  
Laboratories. It is compatible with 5.1-channel surround audio as  
well as normal stereo (2-channel) audio and can accommodate a  
large amount of audio data efficiently in a disc.  
P.B.C.: Play-Back Control (VCD)  
When a VIDEO CD carries “Play Back Control capable” or similar  
message on the disc or jacket, desired scenes and information  
can be played back in an interactive manner using a hierarchical  
structure while viewing the menu screens displayed on the TV  
screen.  
DTS  
Name of a digital surround system developed by Digital Theater  
Systems, Inc.  
MENU/TOP MENU (DVD)  
Some DVDs display more than one title in a screen. This screen is  
referred to as the title menu.  
The DVD menu is the item display (menu screen) for use in  
setting operations. The DVD menu can be recalled any time during  
playback to perform settings according to the current software,  
including the audio switching between Dolby Digital and PCM,  
switching of language used in the subtitles and spoken voice.  
Subtitles (DVD)  
Some DVD discs contains the recording of more than one subtitle  
language. This player allow you to select one of the recorded  
subtitle languages during playback.  
— 8 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading discs  
Setting the disc  
Installing the magazine  
1 Make sure the disc magazine is the right way up with the  
"DVD"/"disc" logo on the top. Pull the tray out by the  
projection.  
1 Open the DVD/CD changer door.  
2 Insert the magazine into the DVD/CD changer until it clicks.  
2 Set a disc on the tray with the recording face upward. (The  
label face is downward.)  
3 Close the DVD/CD changer door.  
8-cm discs cannot be used. If an 8-cm disc adapter is used, the disc  
cannot be ejected.  
3 Insert the tray into the disc magazine until it locks.  
Magazine ejection  
1 Open the DVD/CD changer door.  
The discs are numbered from the top from 1 to 10.  
2 Press the [EJECT] button.  
3 Close the DVD/CD changer door.  
— 9 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of remote control  
Loading and Replacing the battery  
Use two "AAA"-size batteries.  
POWER  
Insert the batteries with the + and – poles aligned properly,  
following the illustration inside the case.  
RESUME  
38  
RETURN  
REP  
ENTER/  
Joystick  
+
-
AUDIO  
TIME  
VOCAL  
-
+
7
RDM  
4/¢  
SCN  
ANGLE  
SUB TITLE  
DISC–/DISC+  
2WARNING  
REW/FF  
LIST  
Store unused batteries out of the reach of children. Contact a doctor  
immediately if the battery is accidentally swallowed.  
PBC  
ZOOM  
[#0]–[#9],[+10]  
GOTO  
CLEAR  
Do not set the remote on hot places such as above the dashboard.  
TOP MENU  
MENU  
• When the remote controllable distance becomes short, replace  
both of the batteries with new ones.  
• A portion of the operations may not be possible, depending on the  
unit that is connected.  
<OSD of DVD/VCD>  
: Angle indicator  
: Language for subtitle indicator  
: Language for voice indicator  
OSD : On Screen Display  
Power / Playing Disc  
Turning ON the Power  
Press the [POWER] button.  
Turning OFF the Power  
<OSD of CD-DA>  
<OSD of MP3>  
Press the [POWER] button.  
You cannot view video pictures whilst the vehicle is moving. To  
enjoy video pictures, find a safe place to park and engage the  
parking brake. (Video output for front seats)  
D I S C 1 0  
T R A C K 1 9 9  
3
D I S C 1 0  
T R A C K 9 9  
3
A – T I M E 0 1 : 0 2 : 1 5  
A – T I M E 0 1 : 0 2 : 1 5  
N A M E : A U D I O – C D  
N A M E : A B C D E F G H I J K L M N O P Q  
N A M E : A B C D E F G H I J K L M N O P Q  
It takes time for the unit to check each medium to see if it contains  
any MP3 file before it starts playing the medium.  
Select the source mode of this unit on the center unit to operate  
this unit linked with the center unit.  
— 10 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Before selecting a source of this unit on the center unit  
Turn on/off the power on the remote controller.  
• After selecting a source of this unit on the center unit  
– Select the source mode of this unit to turn it on.  
– Select the other modes to turn off this unit.  
Disc Search  
Selecting the disc you want to hear.  
Press the [DISC–] or [DISC+] button.  
– Cannot turn off this unit on the remote controller.  
Operation after the end of a disc is reached  
Playback does not automatically switch to the next disc once the  
current disc is played to the end. Switch the disc manually.  
Track/Chapter Search  
Press the [4] or [¢] button.  
Disc  
Operation  
Disc  
Search  
DVD, VCD[PBC ON] The operation differs according to the type  
of disc. (Generally the menu reappears.)  
DVD  
Searching for a chapter  
Searching for a select  
Searching for a track  
Searching for a file  
VCD[PBC ON]  
VCD[PBC OFF], CD-DA  
MP3  
VCD[PBC OFF],  
CD-DA, MP3  
Playback starts from the beginning of the  
disc.  
Pausing and Restarting Disc Play (DVD, VCD, CD-DA)  
Press the [38] button to make the disc pause.  
Press the [38] button again to start play again.  
Folder Select Mode (MP3)  
Selecting the folder you want to hear.  
• The following operation may not be available with certain discs.  
• For MP3, Refer to <Folder Select Mode>. (page 11)  
1 Stopping play and Folder Select mode  
Press the [38] or [7] button.  
2 Selecting the desired folder  
Press the [DISC–] or [DISC+] button.  
Stopping playback (DVD, VCD, CD-DA)  
3 Decide the folder to play  
Press the [7] button.  
Press the button once during playback stops it and the position  
where it is stopped is stored in memory.  
Press the [38] button.  
The Folder Select mode releases, and the MP3 in the folder  
being displayed is played.  
• Press [38] under this condition to resume the play.  
• No operation is possible depending on disks.  
• For MP3, Refer to <Folder Select Mode>. (page 11)  
Press the [7] button.  
Press the button twice to cancel playback.  
— 11 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of remote control  
• While a VCD is played with the PBC function disabled, a track  
change releases the slow playback.  
Forward / Reverse Search (DVD, VCD, CD-DA)  
Forward search  
Canceling the slow playback  
Press the [FF] button.  
Press the [38] button.  
Reverse search  
Press the [REW] button.  
• Each time the button is pressed the Search speed switches as  
shown below.  
Frame-by-frame playback (DVD, VCD)  
Setting  
Display  
1 Pausing  
2 times  
4 times  
6 times  
8 times  
"– – – 22" / "33 – – –"  
"– – 22 –" / "– 33 – –"  
"– 22 – –" / "– – 33 –"  
"22 – – –" / "– – – 33"  
Press the [38] button.  
2 Frame-by-frame playback  
Press the [4] or [¢] button.  
Canceling the frame-by-frame playback  
• Audio output of DVDs and video CDs is disabled during fast-  
forward and fast-rewind. Audio output of audio CDs is disabled at  
the 8x-speed operation.  
Press the [38] button.  
Canceling Fast Forwarding / Reversing  
Press the [38] button.  
Track Scan (VCD, CD-DA)  
Playing the first part of each song on the disc you are listening  
to and searching for the song you want to listen to.  
(VCD: When the PBC function is set to [OFF]. page 14)  
Slow playback (DVD, VCD)  
1 Pausing  
Press the [38] button.  
1 Start Track Scan  
Press the [SCN] button.  
"SCAN" is displayed. Scan starts from the first track.  
2 Forward slow playback  
Press the [FF] button.  
Reverse slow playback  
Press the [REW] button.  
2 Release it when the song you want to listen to is played  
Press the [SCN] or [38] button.  
• Each time the button is pressed the Search speed switches as  
shown below.  
Setting  
Display  
1/6 times  
1/4 times  
1/2 times  
"– – 28" / "83 – –"  
"– 28 –" / "– 83 –"  
"28 – –" / "– – 83"  
Repeat Play  
(VCD: When the PBC function is set to [OFF]. page 14)  
• Slow rewinding play is disabled for VCD.  
— 12 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the [REP] button.  
Each time the button is pressed the Repeat Play switches as  
shown below.  
Direct Disc Search  
Doing Disc Search by entering the disc number.  
1 Enter List Screen  
Press the [LIST] button.  
DVD:  
Repeat play  
Display/Indicator  
Chapter Repeat  
Title Repeat  
OFF  
"CHAPTER REPEAT"/"CREP"  
"TITLE REPEAT"/"TREP"  
"REPEAT OFF"/ –  
2 Enter the disc number  
Press the number buttons.  
3 Do Disc Search  
Press the [DISC+] or [DISC–] button.  
VCD[PBC OFF], CD-DA:  
Repeat play  
Display/Indicator  
Clear the Disc number  
Press the [CLEAR] button.  
Track Repeat  
OFF  
"REPEAT"/"REP"  
"REPEAT OFF"/ –  
MP3:  
Repeat play  
Display/Indicator  
Direct Track/Chapter Search  
Doing Track/Chapter Search by entering the track/chapter  
number.  
File Repeat  
Folder Repeat  
OFF  
"FILE REPEAT"/"REP"  
"FOLDER REPEAT"/"FREP"  
"REPEAT OFF"/ –  
1 Enter List Screen  
Press the [LIST] button.  
2 Enter the track/Chapter number  
Press the number buttons.  
Random Play (VCD, CD-DA, MP3)  
Play all the songs on the disc or MP3 folder in random order.  
(VCD: When the PBC function is set to [OFF]. page 14)  
Press [+10] button to input two digits or more.  
3 Do Track/Chapter Search  
Press the [RDM] button.  
Each time the button is pressed Random Play turns ON or OFF.  
When it's ON, "RANDOM"/"RDM" is displayed.  
Press the [4] or [¢] button.  
Clear the Track/Chapter number  
• When the [¢] button is pressed, the next song select starts.  
• When the [4] button is pressed, the beginning of the current  
song.  
Press the [CLEAR] button.  
— 13 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of remote control  
"DVD MENU" is displayed.  
GOTO - Direct Search (DVD, VCD, CD-DA)  
Enter Top Menu (root menu) mode  
Press the [TOP MENU] button.  
"TITLE MENU" is displayed.  
1 Enter GOTO mode  
Press the [GOTO] button.  
For DVDs, specify the title/chapter number or the elapsed time of  
the title.  
For VCD[PBC OFF] and CD-DA, specify the elapsed time of the  
disc.  
2 Selecting the menu item  
Move the Joystick or press the number buttons.  
3 Setting the menu item  
Press the [ENTER] button.  
2 Select Search mode (DVD only)  
Press the [GOTO] button.  
Each time the button is pressed the Search mode switches as  
shown below.  
See your disc’s operating instructions for information on the menu  
operation.  
Canceling the Menu mode  
Search mode  
Display  
Press the [RESUME] button.  
Title/Chapter Search  
Time Search  
"T. **/ ** C. **/**"  
"TIME __ : __ : __"  
You can switch the title input from/to the chapter input by operating  
the joystick from left side to right side in the title/chapter input  
mode.  
Using the PBC (VCD)  
Available for video CDs with playback control record. (VCD:  
When the PBC function is set to [ON]. page 14)  
3 Enter the number  
Press the number buttons.  
1 Selecting the menu item  
Move the Joystick or press the number buttons.  
Example: In case of Chapter 13 of a DVD  
,
"T02/05 CØØ/030" :  
2 Setting the menu item  
Press the [ENTER] button.  
Example: In case of 1 hour 23 min. 45 sec. of a CD-DA  
"GOTO __ : __ : __" :  
,
,
,
,
,
See your disc’s operating instructions for information on the PBC  
operation.  
4 Do Search  
Press the [ENTER] button.  
PBC function On/Off (VCD)  
You can determine whether to use the PBC function for video  
CDs with playback control record.  
Using DVD Menu (DVD)  
Available in DVDs with title menus/root menus.  
1 Enter Title Menu mode  
Press the [MENU] button.  
Press the [PBC] button for at least 1 second.  
— 14 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Each time the button is pressed PBC function turns ON or OFF.  
This function cannot be used during the List Mode. (page 17)  
"BOTH VOCAL"  
"MIX VOCAL"  
"NO VOCAL"  
Both vocal  
Mix vocal  
Vocal sound off  
This function cannot be used during the List Mode. (page 17)  
VCD/CD-DA  
Display/Indicator  
Switching the Viewing Angle (DVD)  
Press the [ANGLE] button for at least 1 second.  
Each time you press the button to switch viewing angle.  
Setting  
"MONO LEFT"/"LchONLY"  
"MONO RIGHT"/"RchONLY"  
"STEREO"/"LR BOTH"  
Monaural Left (L / L)  
Monaural Right (R / R)  
Stereo (L / R)  
Selecting the Sub Title Language (DVD)  
Press the [SUB TITLE] button for at least 1 second.  
Each time you press the button to change the sub title language.  
Viewing Zoom (DVD, VCD)  
Zooming the image  
This function cannot be used during the List Mode. (page 17)  
Press the [ZOOM] button for at least 1 second.  
Each time the button is pressed the image switches between  
zoom ("X1.5", "X2", "X4") and normal ("OFF").  
This function cannot be used during the List Mode. (page 17)  
Selecting the Audio Language (DVD)  
Scrolling the image  
Press the [AUDIO] button for at least 1 second.  
Each time you press the button to change the voice language.  
Move the Joystick.  
The zoom point is scrolled as the joystick moves.  
Switching the Vocal sound (DVD, VCD, CD-DA)  
Press the [VOCAL] button for at least 1 second.  
Each time the button is pressed the vocal sound switches.  
KARAOKE DVD  
Display  
Setting  
"LEFT VOCAL"  
Left vocal  
"RIGHT VOCAL"  
Right vocal  
— 15 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of remote control  
In OSD screen  
Title Information (DVD)  
DVD  
This shows the information on your disc/title.  
Information  
Display  
1 Enter Title Information  
Title time  
"TITLE##/## CHAPTER###/###"  
"TITLE REMAIN"  
"CHAPTER ELAPSED"  
Press the [PBC] button for at least 1 second.  
Remaining time of title  
Chapter time  
OFF  
This function cannot be used during the List Mode. (page 17)  
D I S C  
T T L 1  
T T L 2  
T T L 3  
VCD[PBC ON]  
Information  
T O T A L T I T L E S :  
P L A Y E N T R I E S :  
P L A Y T I M E :  
A U D I O S T R E A M S :  
S U S P I C S T R E A M S :  
1 0  
1 0  
Display  
Track Time  
OFF  
"SINGLE ELAPSED"  
"OFF"  
0 1 : 1 0 : 1 0  
1 0  
1 0  
N T S C  
VCD[PBC OFF]  
Information  
Display  
Track Time  
Disc time  
Remaining time of entire disc  
OFF  
"SINGLE ELAPSED"  
"TOTAL ELAPSED"  
"TOTAL REMAIN"  
"OFF"  
2 Select Title  
Move the Joystick to left or right side.  
Press the [FF] or [REW] button to switch a title quickly.  
CD-DA  
Canceling the title information  
Information  
Display/Indicator  
Press the [PBC] button for at least 1 second.  
Track Time  
Disc time  
Remaining time of entire disc  
"SINGLE ELAPSED"/"P-TIME"  
"TOTAL ELAPSED"/"A-TIME"  
"TOTAL REMAIN"/"R-TIME"  
MP3  
Information  
Display/Indicator  
Switching the Time display  
File Time  
Remaining time of file  
"FILE ELAPSED"/"P-TIME"  
"FILE REMAIN"/"R-TIME"  
Press the [TIME] button for at least 1 second.  
Each time the button is pressed the display switches as shown  
below.  
The chapter time is not displayed depending on software.  
— 16 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In List screen  
List mode  
DVD  
Information  
1 Enter List Screen  
Indicator  
Press the [LIST] button.  
Title time  
Remaining time of title  
Chapter time  
"A-TIME"  
"R-TIME"  
"P-TIME"  
DISC LIST  
I N F O R M A T I O N  
AUDIO–CD  
DVD–VIDEO  
DVD–VIDEO  
ISO9660  
D I S C  
1
T R A C K  
1
VCD[PBC ON]  
Information  
Track Time  
P – T I M E  
VCD_V20  
VIDEO_CD  
NO ACCESS  
NO DISC  
E–04  
0 0 : 0 1 : 1 0  
Indicator  
S T A T U S  
3
L R B O T H  
"P-TIME"  
M O D E  
VCD[PBC OFF], CD-DA  
Information  
E–15  
Indicator  
Track Time  
Disc time  
Remaining time of entire disc  
"P-TIME"  
"A-TIME"  
"R-TIME"  
2 Select the Disc  
Move the Joystick to front or back side.  
Press the [ENTER] button.  
MP3  
Disc  
Select items  
Information  
Display  
DVD  
VCD  
CD-DA  
The DVD will start playing.  
The VCD will start playing.  
The CD-DA will start playing. Refer to the  
Track List Screen.  
File Time  
Remaining time of file  
"P-TIME"  
"R-TIME"  
MP3  
The MP3 will start playing. Refer to the  
File List Screen.  
Canceling the List mode  
Press the [LIST] button.  
— 17 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of remote control  
Track List Screen (CD-DA)  
File List Screen (MP3)  
1 Starting CD-DA  
Refer to the List mode.  
1 Starting MP3  
Refer to the List mode.  
2 Switching to the track list screen  
Press the [ENTER] button.  
2 Switching to the file/folder list screen  
Press the [ENTER] button.  
ISO9660  
I N F O R M A T I O N  
FOLDER–2  
..  
I N F O R M A T I O N  
AUDIO–CD  
TRACK–01  
TRACK–02  
TRACK–03  
TRACK–04  
TRACK–05  
TRACK–06  
TRACK–07  
TRACK–08  
TRACK–09  
I N F O R M A T I O N  
..  
D I S C  
4
D I S C  
4
D I S C  
1
FOLDER–1  
FOLDER–2  
FILE0–01.MP3 P – T I M E  
F O L D E R  
F I L E  
1
1
FOLDER–2–1 F O L D E R  
FILE2–01.MP3 F I L E  
3
1
T R A C K  
2
FILE2–02.MP3 P – T I M E  
P – T I M E  
FILE0–02.MP3  
FILE0–03.MP3 S T A T U S  
N A M E  
0 0 : 0 2 : 1 5  
FILE2–03.MP3  
0 0 : 0 2 : 1 5  
0 0 : 0 1 : 1 0  
3
FILE2–04.MP3 S T A T U S  
N A M E  
FILE2–05.MP3  
3
S T A T U S  
3
FILE0–04.MP3  
L R B O T H  
FILE0–05.MP3 F I L E 0 – 0 1 . M P 3  
FILE0–06.MP3 M O D E  
FILE2–06.MP3 F I L E 2 – 0 1 . M P 3  
FILE2–07.MP3 M O D E  
M O D E  
3 Select the track list  
Move the Joystick to left or right side.  
3 Select the file/folder list  
Move the Joystick to left or right side.  
4 Select the track  
Move the Joystick to front or back side.  
Press the [ENTER] button.  
4 Select the file/folder  
Move the Joystick to front or back side.  
Press the [ENTER] button.  
Display  
Select items  
Scrolling the track list  
File  
Folder  
.."  
The MP3 file will start playing.  
Move to a folder.  
Move to an upper-level folder.  
1 Stopping playback  
Press the [7] button.  
"
2 Press the [4] or [¢] button.  
Returning to the List mode  
Scrolling the file/folder list  
1 Stopping playback  
Press the [7] button.  
1 Select the disc title  
Move the Joystick to left or right side.  
2 Press the [4] or [¢] button.  
Returning to the List mode  
2 Returning to the list screen  
Press the [ENTER] button.  
1 Select the disc/folder title  
Move the Joystick to left or right side.  
— 18 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preferences  
2 Returning to the list screen  
Press the [ENTER] button.  
Display  
Select items  
RESUME  
RETURN  
Disc  
Folder  
Returning to the list screen.  
Move to an upper-level folder.  
ENTER/  
Joystick  
7
[#0]–[#9]  
SETUP  
CLEAR  
<SETUP screen>  
SETUP  
LANGUAGE  
AUDIO  
DISPLAY  
PARENTAL  
EXIT SETUP  
GO TO LANGUAGE SETTING  
— 19 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preferences  
Setup mode  
INPUT LANGUAGE CODE  
LANGUAGE SETTING  
1 Stopping playback  
en  
ORIGINAL  
1
e
1
n
4
4
AUDIO LANG  
SUB–T LANG  
MENU LANG  
SETUP LANG  
LANGUAGE NUMBER:  
Press the [7] button.  
2 Enter Setup mode  
Press the [SETUP] button.  
MAIN PAGE  
3 Select the setup item  
Move the Joystick.  
CHANGE AUDIO LANGUAGE  
PLEASE INPUT LANGUAGE CODE  
Press the [ENTER] button.  
2 Select the language item  
Display  
Move the joystick to select an item.  
Press the [ENTER] button.  
"LANGUAGE"  
"AUDIO"  
"DISPLAY"  
"PARENTAL"  
page 20  
page 23  
page 24  
page 24  
"AUDIO LANG"  
Set the audio language produced from the speakers.  
Display  
Setting  
4 Exit Setup mode  
Select "EXIT SETUP" and press the [ENTER] button.  
Example "en"  
The display switches to the language  
number input screen.  
The original language of a disc.  
Canceling the Setup mode  
"ORIGINAL"  
Press the [SETUP] or [RESUME] button.  
"SUB–T LANG"  
Set the language of the subtitles displayed on the screen.  
Display  
Setting  
Setting the Priority Language  
Example "en"  
The display switches to the language  
number input screen.  
The original language of a disc.  
No subtitle is displayed  
1 Select "LANGUAGE" mode  
See <Setup mode> to select "LANGUAGE".  
"ORIGINAL"  
"OFF"  
"MENU LANG"  
Set the language used for the menus (title menu, etc.).  
Display  
Setting  
Example "en"  
The display switches to the language  
number input screen.  
"ORIGINAL"  
The original language of a disc.  
— 20 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
"SETUP LANG"  
Set the setup, message or other display languages.  
Display  
Setting  
"ENGLISH"  
Set the English  
Set the Japanese  
日本語  
"
"
3 Select the language (Language number input screen)  
Press the number buttons.  
See "List of language codes" to input a 4-digit code.  
Press the [ENTER] button.  
Returning to the Previous screen  
Press the [RETURN] button.  
— 21 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preferences  
1307 ku Kurdish  
1311 ky Kirghiz  
List of language codes  
1313 la  
1327 lo  
1334 lv  
Latin  
Laothian  
Latvian, Lettish  
1326 ln  
1332 lt  
Lingala  
Lithuanian  
Code  
Language  
Code  
Language  
1027 aa Afar  
1028 ab Abkhazian  
1039 am Amharic  
1045 as Assamese  
1052 az  
1057 be Byelorussian  
1060 bh Bihari  
1066 bn Bengali, Bangla  
1070 br  
1093 co Corsican  
1103 cy Welsh  
1109 de German  
1142 el  
1145 eo Esperanto  
1150 et  
1157 fa  
1166 fj  
1174 fr  
1183 ga Irish  
1194 gl  
1203 gu Gujarati  
1217 hi  
1345 mg Malagasy  
1349 mk Macedonian  
1352 mn Mongolian  
1356 mr Marathi  
1358 mt Maltese  
1365 na Nauru  
1032 af  
1044 ar  
Afrikaans  
Arabic  
1347 mi Maori  
1350 ml Malayalam  
1353 mo Moldavian  
1357 ms Malay  
1363 my Burmese  
1369 ne Nepali  
1379 no Norwegian  
1403 om (Afan) Oromo  
1417 pa Punjabi  
1435 ps Pashto, Pushto  
1463 qu Quechua  
1051 ay Aymara  
1053 ba Bashkir  
1059 bg Bulgarian  
Azerbaijani  
1061 bi  
Bislama  
1376 nl  
Dutch  
1067 bo Tibetan  
1079 ca Catalan  
1097 cs Czech  
1105 da Danish  
1130 dz Bhutani  
1144 en English  
1149 es Spanish  
1151 eu Basque  
Breton  
1393 oc Occitan  
1408 or  
1428 pl  
1436 pt  
Oriya  
Polish  
Portuguese  
Greek  
1481 rm Rhaeto-Romance  
1483 ro Romanian  
1491 rw Kinyarwanda  
1498 sd Sindhi  
1502 sh Serbo-Croatian  
1505 sk Slovak  
1507 sm Samoan  
1509 so Somali  
1482 rn  
1489 ru  
Kirundi  
Russian  
Estonian  
Persian  
Fiji  
1495 sa Sanskrit  
1501 sg Sangro  
1165 fi  
1171 fo  
1181 fy  
Finnish  
Faeroese  
Frisian  
French  
1503 si  
1506 sl  
Singhalese  
Slovenian  
1186 gd Scots Gaelic  
1196 gn Guarani  
1209 ha Hausa  
Galician  
1508 sn Shona  
1511 sq Albanian  
1513 ss Siswati  
1515 su Sundanese  
1517 sw Swahili  
1512 sr  
1514 st  
Serbian  
Sesotho  
Hindi  
1226 hr  
Croatian  
1229 hu Hungarian  
1516 sv Swedish  
1233 hy Armenian  
1235 ia  
1245 ik  
1253 is  
1257 iw Hebrew  
1269 ji Yiddish  
1287 ka Georgian  
1298 kl Greenlandic  
Interlingua  
Inupiak  
Icelandic  
1521 ta  
1527 tg  
1529 ti  
1532 tl  
1535 to  
1539 ts  
Tamil  
Tajik  
Tigrinya  
Tagalog  
Tonga  
Tsonga  
1239 ie  
1248 in  
1254 it  
1261 ja  
Interlingue  
Indonesian  
Italian  
1525 te  
1528 th  
1531 tk  
1534 tn  
1538 tr  
1540 tt  
Tegulu  
Thai  
Turkmen  
Setswana  
Turkish  
Tatar  
Japanese  
1283 jw Javanese  
1297 kk Kazakh  
1299 km Cambodian  
1301 ko Korean  
1543 tw Twi  
1300 kn Kannada  
1305 ks Kashmiri  
1557 uk Ukrainian  
1572 uz Uzbek  
1564 ur  
1581 vi  
Urdu  
Vietnamese  
— 22 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1587 vo Volapuk  
1632 xh Xhosa  
1684 zh Chinese  
1613 wo Wolof  
1665 yo Yoruba  
1697 zu Zulu  
"OPT-PCM"  
If connecting through digital audio equipment  
without any Dolby Digital or DTS decoder,  
If connecting with digital audio equipment without any Dolby Digital  
or DTS decoder, select “OPT-PCM” for the setting. If the setting is  
"OPT-RAW", it may cause a large sound or noise, which can result in  
failure.  
Setting the Audio  
• "ANALOG": To output analog signal but no digital signal.  
• "OPT-RAW": To output bit-stream signal if playing with Dolby Digital  
or DTS. If playing with MPEG or linear PCM, you obtain the output  
with PCM. No analog signal is output.  
1 Select "AUDIO" mode  
See <Setup mode> to select "AUDIO".  
• "OPT-PCM": To output with PCM if playing with Dolby Digital,  
MPEG or linear PCM. If playing with DTS, you obtain no output.  
No analog signal is output.  
AUDIO SETTING  
D-RANGE  
AUDIO-OUT  
OFF  
ON  
MAIN PAGE  
DYNAMIC RANGE COMPRESSION  
2 Select the audio  
Move the joystick to select an item.  
Press the [ENTER] button.  
"D-RANGE"  
Display  
Setting  
"OFF"  
"ON"  
For the regular sound  
For more powerful sound at regular volumes  
"AUDIO-OUT"  
Setting digital output type.  
Display  
Setting  
"ANALOG"  
If connecting through a center unit or RCA  
cable,  
"OPT-RAW"  
If connecting through a Dolby Digital or DTS  
decoder  
— 23 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preferences  
See <Setup mode> to select "PARENTAL".  
Setting the Screen Mode  
Use the procedure described below to set the output screen.  
PARENTAL SETTING  
VERIFY PASSWORD  
LEVEL  
PASSWORD  
OFF  
8
:
XXXX  
PASSWORD  
1 Select "DISPLAY" mode  
See <Setup mode> to select "DISPLAY".  
7
6
5
DISPLAY SETTING  
4
3
MAIN PAGE  
2
1
TV ASPECT  
16:9 WIDE  
4:3 P&S  
4:3 LB  
SET PARENTAL LEVEL  
INPUT PASSWORD  
2 Setting the "LEVEL"(Parental Level)  
Move the joystick to select an item.  
Press the [ENTER] button.  
MAIN PAGE  
SET TV ASPECT  
Display  
Setting  
"OFF"  
"8"  
Canceling the parental lock.  
Plays any software (including adult-, general- and  
children-oriented).  
2 Select the "TV ASPECT"  
Move the joystick to select an item.  
Press the [ENTER] button.  
"7" – "2"  
"1"  
Plays general- and children-oriented DVD software.  
Restricts playback of adult-oriented DVD software.  
Plays children-oriented software.  
Restricts playback of adult and general-oriented DVD  
software.  
Display  
Setting  
"16:9 WIDE"  
Set the picture mode of the wide-screen monitor  
to “FULL”  
Wide-screen software with pan & scan  
specification is played in a panned & scanned  
screen (with the left and right sides cut off).  
Wide-screen software with pan & scan  
specification is played in a letter box screen (with  
black stripes on the top and bottom).  
"4:3 P&S"  
"4:3 LB"  
Parental level varies with the discs.  
3 Enter the password  
Press the number buttons.  
Enter your password ( 4-digit ). Input numbers are displayed “X”.  
Press the [ENTER] button.  
• If you enter the wrong number, press the [CLEAR] button. The  
entered number is cleared.  
• The password’s initial value is 0000.  
Setting the Rating Level (parental lock)  
Use this function to restrict the viewing of movies to children of  
appropriate age levels only.  
• Pressing the Reset button erases the password.  
To change the password  
Select "PASSWORD" and press the [ENTER] button.  
1 Select "PARENTAL" mode  
— 24 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of center unit  
Display  
Setting  
"CURRENT PWD"  
"NEW PWD"  
To enter your current password correctly  
To enter a new password  
"REENTER PWD"  
To enter the new password again for  
confirmation  
Button Name and Functions of Center unit  
• Some discs may request that you change the rating level set in  
the default settings during playback. In this case, the rating level  
setup screen is displayed, if you do not input the correct password  
either playback does not continue or a picture for a different rating  
level is played.  
• Write down the password on a piece of paper and store the piece  
of paper somewhere in case you forget it.  
• On undated DVDs, playback will not be restricted even if the rating  
level is set.  
[SRC]: Selecting the Source  
[38]: Pause and Play  
[DISC–]: Making a Reverse Disc Search (Album Search)  
[DISC+]: Making a Forward Disc Search (Album Search)  
[4]: Making a Reverse Track Search  
[¢]: Making a Forward Track Search  
[SCN]/[SCAN]: Track Scan  
[REP]: Track Repeat (Track/Disc(Album) Repeat)  
[D-REP]: Disc Repeat (Album Repeat)  
[RDM]: Random Play  
• Once set, this rating level remains in memory until changed. To  
enable the play of discs of higher rating levels or to cancel the  
parental lock, the setting must be changed.  
• Not all DVDs provide a Parental Lock feature. If you are unsure  
about a DVD, play it first to confirm. Do not leave DVDs accessible  
to young children for whom you deem them inappropriate.  
Some functions may be disabled depending on center units. Also  
see operation manual of your center unit.  
DVD: Title time  
VCD, CD-DA: Track time  
MP3: File time  
Disc number  
DVD: Title number  
VCD, CD-DA: Track number  
MP3: File number  
— 25 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of center unit  
Hold down on the [4] button.  
Release your finger to play the disc at that point.  
Playing Disc  
Press the [SRC] button.  
Search is carried out at the 6x speed.  
Select the "CD-CH"/"DISC"/"AUX" display.  
You cannot view video pictures whilst the vehicle is moving. To  
enjoy video pictures, find a safe place to park and engage the  
parking brake. (Video output for front seats)  
• It takes time for the unit to check each medium to see if it  
contains any MP3 file before it starts playing the medium.  
• File No. may not be shown depending on center units to be  
connected if the number is 100 or 200.  
Disc Search  
Selecting the disc you want to hear.  
Press the [DISC–] or [DISC+] button.  
Select the source mode of this unit on the center unit to operate  
this unit linked with the center unit.  
• Before selecting a source of this unit on the center unit  
Turn on/off the power on the remote controller.  
• After selecting a source of this unit on the center unit  
– Select the source mode of this unit to turn it on.  
– Select the other modes to turn off this unit.  
Track/Chapter Search  
Press the [4] or [¢] button.  
Disc  
Search  
– Cannot turn off this unit on the remote controller.  
DVD  
Searching for a chapter  
Searching for a select  
Searching for a track  
Searching for a file  
VCD[PBC ON]  
VCD[PBC OFF], CD-DA  
MP3  
Pausing and Restarting Disc Play (DVD, VCD, CD-DA)  
Press the [38] button to make the disc pause.  
Press the [38] button again to start play again.  
• The following operation may not be available with certain discs.  
• For MP3, Refer to <Folder Select Mode>. (page 26)  
Folder Select Mode (MP3)  
Selecting the folder you want to hear.  
1 Stopping play and Folder Select mode  
Press the [38] button.  
Fast Forwarding and Reversing (DVD, VCD, CD-DA)  
File No. display changes to Folder No. display during the Folder  
select mode.  
Fast Forwarding  
Hold down on the [¢] button.  
Release your finger to play the disc at that point.  
2 Selecting the folder  
Press the [DISC–] or [DISC+] button.  
Reversing  
3 Decide the folder to play  
— 26 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the [38] button.  
The Folder Select mode releases, and the MP3 in the folder  
being displayed is played.  
Track Scan (VCD, CD-DA)  
Playing the first part of each song on the disc you are listening  
to and searching for the song you want to listen to.  
(VCD: When the PBC function is set to [OFF]. page 14)  
1 Start Track Scan  
Press the [SCN] button.  
Scan starts from the first track.  
Direct Disc Search (Function of remote)  
Doing Disc Search by entering the disc number.  
2 Release it when the song you want to listen to is played  
Press the [SCN] or [38] button.  
1 Enter the disc number  
Press the number buttons on the remote.  
Input "0" to select disc 10.  
2 Do Disc Search  
Press the [DISC+] or [DISC–] button.  
Canceling Direct Disc Search  
Press the [38] button.  
Direct Track/Chapter Search (Function of remote)  
Doing Track/Chapter Search by entering the track/chapter  
number.  
1 Enter the track/Chapter number  
Press the number buttons on the remote.  
Direct Track/Chapter Search is enabled for up to 99.  
2 Do Track/Chapter Search  
Press the [4] or [¢] button.  
Canceling Direct Track/Chapter Search  
Press the [38] button.  
— 27 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations of center unit  
song.  
Repeat Play  
(VCD: When the PBC function is set to [OFF]. page 14)  
Press the [REP] or [D-REP] button.  
Each time the button is pressed the Repeat Play switches as  
shown below.  
Magazine Random Play  
Magazine Random Play is disabled in this unit.  
Track Repeat ON:  
Disc  
Repeat play  
DVD  
VCD[PBC OFF]  
CD-DA  
Chapter Repeat  
Track Repeat  
Track Repeat  
File Repeat  
Disc Naming (DNPS)  
The disc name preset function can register names of up to 29  
discs using up to 12 characters for each disc name.  
The availability of this function as well as the number of discs  
which can be registered using this function and the number of  
usable characters may be variable depending on the control unit  
in use.  
MP3  
Disc Repeat ON:  
Disc  
Repeat play  
DVD  
MP3  
Title Repeat  
Folder Repeat  
DVD and MP3 recorded media allows you to register a single media  
name only.  
Repeat OFF:  
Disc  
Repeat play  
DVD  
VCD[PBC OFF]  
CD-DA  
Repeat Off  
Repeat Off  
Repeat Off  
Repeat Off  
MP3  
Random Play (VCD, CD-DA, MP3)  
Play all the songs on the disc or MP3 folder in random order.  
(VCD: When the PBC function is set to [OFF]. page 14)  
Press the [RDM] button.  
Each time the button is pressed Random Play turns ON or OFF.  
• When the [¢] button is pressed, the next song select starts.  
• When the [4] button is pressed, the beginning of the current  
— 28 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Installation Procedure  
1. To prevent short circuits, remove the key from the ignition and  
External view  
External view  
......... Number of items  
disconnect the - terminal of the battery.  
......... Number of items  
2. Make the proper input and output wire connections for each unit.  
3. Connect the wire on the wiring harness.  
4. Install the unit in your car.  
5. Reconnect the - terminal of the battery.  
2WARNING  
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
.........1  
.........1  
.........4  
.........6  
.........1  
.........1  
.........1  
.........1  
.........4  
.........1  
.........1  
.........1  
.........1  
.........1  
If you connect the ignition wire (red) and the battery wire (yellow)  
to the car chassis (ground), you may cause a short circuit, that in  
turn may start a fire. Always connect those wires to the power  
source running through the fuse box.  
2CAUTION  
• If your car is not prepared for this special connection-system,  
consult your Kenwood dealer.  
• Make sure that all wire connections are securely made by  
inserting jacks until they lock completely.  
• If your vehicle's ignition does not have an ACC position, or if the  
ignition wire is connected to a power source with constant  
voltage such as a battery wire, the power will not be linked with  
the ignition (i.e., it will not turn on and off along with the  
ignition). If you want to link the unit's power with the ignition,  
connect the ignition wire to a power source that can be turned  
on and off with the ignition key.  
• If the fuse blows, first make sure that the wires have not caused  
a short circuit, then replace the old fuse with one with the same  
rating.  
• Insulate unconnected wires with vinyl tape or other similar  
material. To prevent short circuits, also do not remove the caps  
on the ends of the unconnected wires or the terminals.  
• After the unit is installed, check whether the brake lamps,  
indicators, wipers, etc. on the car are working properly.  
NO  
.
1
N
O.  
6
2
7
3
8
4
9
10  
5
.........1  
The use of any accessories except for those provided might result in  
damage to the unit. Make sure only to use the accessories shipped with  
the unit, as shown above.  
— 29 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Wires to Terminals  
Power wire connection  
2 CAUTION  
Caution on power wire connection  
• Be sure that the ground wire is connected to the chassis of a vehicle.  
• Connect to another component after having connected the power/ground wire.  
• If connecting to a center unit, you must connect the power/ground wire of this unit.  
Ignition key  
switch 41  
ACC 44  
Fuse (2A) 13  
Ignition wire (Red) 7  
ACC  
Fuse (5A) 13  
Battery wire (Yellow) 6  
BATT  
Car fuse  
box  
(Main fuse)  
42  
Car fuse box 45  
Ground wire (Black) - (To car chassis) 48  
+
Battery  
43  
H
45°  
V
Connection wire (Green)  
(Accessory5)  
H
45°  
V
PARKING  
To parking brake detection switch  
harness of car  
2 CAUTION  
Picture format selector  
switch  
Select the NTSC/PAL  
position for your monitor.  
For the sake of safety, be sure to  
connect the parking sensor.  
PAL NTSC  
Light detector of remote  
controller (Accessory8)  
Please follow the procedure below to switch the NTSC/PAL switch.  
1. Remove the magazine.  
2. Turn OFF the power.  
3. Set the switch to "NTSC" or "PAL".  
4. Turn ON the power.  
5. Insert the magazine.  
If the magazine is inserted before the power is turned ON, the picture may not  
be displayed correctly until the disc is played.  
— 30 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To connect this unit to a monitor unit for use solely  
Video output for rear seats.  
(Yellow)  
VIDEO  
OUTPUT  
REAR  
VIDEO  
OUTPUT  
Monitor unit  
FRONT  
H
45°  
V
Video output for front  
seats. (Yellow)  
(Accessory6)  
H
45°  
V
Audio output  
(Left: White,  
Right: Red)  
When your car audio is Kenwood center unit  
To monitor unit  
for rear seats.  
Video output for rear seats.  
(Yellow)  
When the source mode of this  
unit is not selected in the  
center unit, you can use this  
unit solely.  
VIDEO  
OUTPUT  
REAR  
VIDEO  
OUTPUT  
FRONT  
H
45°  
V
Monitor unit  
for front seats.  
Video output for front  
seats. (Yellow)  
H
45°  
V
(Accessory6)  
Audio output  
(Left: White,  
Right: Red)  
Center unit  
TO  
DVD CH  
Changer control cable  
(Accessory7)  
— 31 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Wires to Terminals  
When your car audio has RCA input  
To monitor unit  
for rear seats.  
Video output for rear seats.  
(Yellow)  
VIDEO  
OUTPUT  
REAR  
VIDEO  
Monitor unit  
for front seats.  
OUTPUT  
FRONT  
H
45°  
Video output for front seats.  
(Yellow)  
V
(Accessory6)  
H
45°  
V
Car audio with  
RCA input.  
Audio output  
(Left: White,  
Right: Red)  
This is used to connect to a digital audio device  
To monitor unit  
for rear seats.  
Video output for rear seats.  
(Yellow)  
VIDEO  
OUTPUT  
REAR  
VIDEO  
Monitor unit  
for front seats.  
OUTPUT  
FRONT  
H
45°  
Video output for front seats.  
(Yellow)  
V
(Accessory6)  
H
45°  
V
No connect.  
Optical digital output  
Digital amplifier/  
DTS decoder etc.  
Optical cable  
(commercially available)  
Set “AUDIO OUT” depending on digital equipment to be connected. (See page 23)  
— 32 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Removing the transportation screws  
Horizontal installation  
Set "H" for all the four angle  
adjustment parts on both sides.  
Cover the holes indicated by  
"3"/" " with the dustproof  
seals !, @.  
Remove all 3 transportation  
H
45°  
V
screws for protecting the  
internal mechanism before  
you start to install the unit.  
After removing the transport  
screw, retain it carefully and  
attach it again before  
3
H
45°  
V
3
“H”  
H
45°  
V
3
3
3
Use the holes marked "" to  
install the unit.  
H
3
45°  
V
3
transporting the unit again.  
Accessory 4  
Cover the holes indicated by  
"3" with the dustproof seals  
!.  
Accessory 3  
(M5 x 8)  
(Ø5 x 12)  
Transportation screws  
Angle adjustment switches  
Horizontal installation  
The angle adjustment  
switches on the both side  
of the unit are to be set  
according to the angle of  
installation of the DVD/CD  
auto changer. Set both of  
the 4 switches to the same  
position. If the switches  
are not set properly, sound  
skip or other malfunction  
may occur.  
H
H
45°  
45°  
V
V
H
H
45°  
45°  
V
V
Accessory 1 (L)  
Ø3.6  
Vertical installation  
Accessory 1 (R)  
At a 45° angle  
— 33 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Vertical installation  
“V”  
At a 45° angle installation  
Set "V" for all the four  
angle adjustment parts on  
both sides.  
Cover the holes indicated  
by "3"/" " with the  
dustproof seals !, @.  
Use the holes marked ""  
to install the unit.  
Set "45°" for all the four  
angle adjustment parts on  
both sides.  
Cover the holes indicated  
by "3"/" " with the  
dustproof seals !, @.  
Use the holes marked ""  
to install the unit.  
“45°”  
3
3
3
3
Accessory 3  
(Ø5 x 12)  
Accessory 3  
(Ø5 x 12)  
Accessory 4  
(M5 x 8)  
Accessory 4  
(M5 x 8)  
Ø3.6  
Accessory 2 (L)  
Ø3.6  
Accessory 2 (L)  
Accessory 2 (R)  
Accessory 2 (R)  
<When your car audio is  
Kenwood center unit>  
Changer control cable  
(Accessory7)  
— 34 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In case of hanging in the trunk  
Mounting the remote controller  
Set "H" for all the four angle  
Light detector of remote  
controller (Accessory8)  
H
45°  
adjustment parts on both sides.  
Cover the holes indicated by  
"3"/" " with the dustproof  
seals !, @.  
V
3
H
45°  
V
3
Clear the surface to be  
affixed with  
accessories0.  
“H”  
H
45°  
V
Use the holes marked "" to  
install the unit.  
H
3
45°  
V
3
Accessory 9  
Accessory #  
Accessory 1 (L)  
Ø3.6  
Accessory 1 (R)  
Accessory $  
(M3 x 8 mm)  
Accessory $  
Accessory 4  
(M5 x 8)  
Accessory 3  
(Ø5 x 12)  
— 35 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
Replace both two batteries of the remote controller with new  
What might seem to be a malfunction in your unit may  
just be the result of slight misoperation or miswiring.  
Before calling service, first check the following table  
for possible problems.  
ones.  
The remote controller does not work.  
See <Connecting Wires to Terminals> to connect the light  
detector of the remote controller correctly.  
? The power does not turn ON.01  
A center unit not applicable is connected.  
See <IMPORTANT INFORMATION> (page 4).  
The fuse has blown.  
After checking for short circuits in the wires, replace the fuse with  
one with the same rating.  
? The memory is erased when the ignition is turned OFF.10  
The battery wire has not been connected to the proper terminal.  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
No ACC position on vehicle ignition.02  
Connect the same wire to the ignition as the battery wire.  
The remote controller does not work.  
The ignition and battery wire are incorrectly connected.11  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
See <Connecting Wires to Terminals> (page 30) to connect the  
light detector of the remote controller correctly.  
? The power cannot be turned off  
? No sound can be heard, or the volume is low.  
You select the source mode of this machine, which is connected to a  
center unit.  
The audio setting of audio output is not “ANALOG”.  
If connecting through a center unit or RCA cable, select  
“ANALOG” for this setting.  
The power cannot be turned off because the center unit is under  
operation. If changing a mode other than the source mode of this  
machine on the center unit, you can turn off the power.  
The input/output wires or wiring harness are connected incorrectly.22  
Reconnect the input/output wires or the wiring harness correctly.  
See the section on <Connecting Wires to Terminals>.  
? The power is automatically turned off.  
You switched the source mode while connecting to a center unit.  
If selecting the source mode of this machine on the center unit  
and then switching to a mode other than this machine, you can  
turn off the power.  
? The specified disc does not play, but another one plays instead.52  
The specified DVD/CD is quite dirty.  
Clean the Disc.  
The disc is upside down.  
Set the disc with the label face downward.  
? No video image appears.  
The unit is not connected to the parking brake detection switch.  
Make proper connections according to <Connecting Wires to  
Terminals>.  
The disc is severely scratched.55  
Try another disc instead.  
The parking brake is not engaged.  
? The specified track will not play.58-a  
For safety reasons no video images are displayed while the  
vehicle is moving. Engaging the parking brake will cause images  
to be displayed.  
Random play has been selected.  
Turn off random play.  
? Cannot play CD-R or CD-RW.60  
The setting of the NTSC/PAL switch is incorrect.  
Finalization processing is not being conducted for CD-R/CD-RW.  
Set the NTSC/PAL switch correctly.  
Conduct finalization processing with CD recorder.  
? Nothing happens when the buttons are pressed.04  
? A VCD cannot be played using menus.  
The " " symbol appears in the screen.  
You cannot carry out any operation disabled by disc.  
The VCD disc being played is not compatible with P.B.C.  
Menu playback is available only with VCD discs recorded with  
P.B.C.  
The batteries of the remote controller are weak.  
— 36 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
? The subtitle is not displayed.  
?Noise or no sound generated when an MP3 is played.70  
The DVD disc being played does not contain the recording of  
subtitles.  
The track has the MP3 track name extension while it is not an MP3.  
Do not use the ".MP3" extension in non-MP3.  
The subtitle cannot be displayed when the DVD disc being played  
does not contain the recording of subtitles.  
? Takes time before the unit starts playing MP3.71  
The medium contains many albums, tracks, and hierarchical levels.  
The unit checks all tracks on the loaded medium first. If the  
medium has many tracks recorded, it may take a long time for the  
unit before it starts playing MP3.  
? The voice (or subtitle) language cannot be changed.  
The DVD disc being played does not contain the recording of more  
than one audio (or subtitle) language.  
The voice (or subtitle) language cannot be changed when the DVD  
disc being played does not contain the recording of more than one  
voice (or subtitle) language.  
? Fails to play MP3 in the intended order.72  
The MP3 tracks were not written by the CD writer in the order in  
which you wanted them to be played.  
? The viewing angle cannot be changed.  
Depending on the CD writer, you may be able to set the order in  
which MP3 tracks are to be played by writing them onto a  
medium with their track names beginning with play sequence  
numbers such as "01" to "99".  
The DVD disc being played does not contain the recording of more  
than one angle.  
The viewing angle cannot be changed when the DVD disc being  
played does not contain the recording of more than one angle.  
? The sound skips when an MP3 is being played.73-1  
You are attempting to switch the angle in a DVD section where more  
than one angle is not recorded.  
The media is scratched or dirty.  
Clean the media, referring to the section on <Disc cleaning>  
More than one viewing angle may be recorded only in limited  
sections in a disc.  
(page 6).  
The recording condition is bad.73-2  
Record the media again or use another media.  
? Playback will not start even after a title is selected.  
A viewing restriction (RATING) has been set for the disc.  
Check the viewing restriction level (RATING) setting.  
? Can’t enter Folder Select mode.76  
There’s no folder recorded in the MP3 media.  
? The voice or subtitle language selected in the initial setting is not  
played.  
Use a media with levels.  
? The songs in the selected folder aren’t played in Folder Select  
The DVD disc being played does not contain the recording of the  
selected voice or subtitle language.  
mode.77  
There are no MP3 in the selected folder.  
Make sure there’s recorded content in the MP3 media.  
Use a DVD disc containing the recording of the selected voice or  
subtitle language.  
? The MP3 track/disc search takes time.78  
MP3 source  
Many tracks are recorded on the media.  
When the media directory is complex, the track/disc search can  
take time.  
? Cannot play an MP3.67  
Not conforming to ISO 9660 Level 1/2, and Joliet.  
Use a medium conforming to ISO 9660 Level 1/2, and Joliet.  
The MP3 has no or invalid track name extension.68  
Add the ".MP3" extension to the MP3 track name.  
The media is scratched or dirty.69  
Clean the media, referring to the section on <Disc cleaning>  
(page 6).  
— 37 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
The messages shown below display your systems  
condition.  
E-01:EJECT: No disc magazine has been loaded. The disc  
magazine is not completely loaded.E01  
Load the disc magazine properly.  
NO DISC:  
E-04:  
No disc has been loaded in the disc magazine.E02  
Load a disc into the disc magazine.  
The Disc is quite dirty. The Disc is upside-down. The  
Disc is scratched a lot.  
Clean the Disc and load it correctly.  
E-15:  
• The disc cannot be played because of its  
unacceptable format.  
• A disc that cannot be read is set.  
Use another disc.  
A file with unacceptable format is included.  
E-99:  
Something is wrong with the disc magazine. Or the  
unit is malfunctioning for some reason.E99  
Check the disc magazine. And then press the reset  
button on the unit. If the "E-99" code does not  
disappear, consult your nearest service center.  
NO NAME:  
Attempted to display DNPS during the CD play having  
no disc names preset.E51  
NO ACCESS: No playback has been performed after the disc  
was set into the disc changer.  
WRONG REGION!!: The DVD software encoded for other region  
code.  
— 38 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Region codes in the world  
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.  
1
5
2
1
2
1
4
5
2
4
— 39 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications subject to change without notice.  
Player section  
D/A conversion ............................................................8 Level ∆∑  
Wow and flutter ......................................Below measurable limit  
Frequency response (Sampling frequency; 96 kHz)  
....................................................................20 Hz - 44 kHz  
Total harmonic distortion ......................................0.01 % (1 kHz)  
Signal to noise ratio ..........................................................110 dB  
Dynamic range ....................................................................90 dB  
Channel separation..............................................................90 dB  
Disc format ............DVD-VIDEO / VIDEO CD / CD-DA / CD-ROM  
MP3 decoder...........Compliant with MPEG-1.0/2.0 Audio Layer-3  
General  
Audio output level / Load ...........................................1.2 V/10 kΩ  
Video output level......................................................1 Vp-p/75 Ω  
Operating voltage (11 – 16V allowable) ..............................14.4 V  
Current consumption...............................................................3 A  
Dimensions (W x H x D) ................................250 × 80 × 200 mm  
9-13/16 × 3-1/8 × 7-7/8 in.  
Weight...................................................................6.2 lbs (2.8 kg)  
— 40 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jacuzzi Hot Tub Y875 RH User Manual
JVC Camcorder GR AX655 User Manual
JVC CRT Television GGT0047 001C H User Manual
JVC Security Camera TK C625U User Manual
Kalorik Fryer USK FT 14417 User Manual
Ken A Vision Microscope Magnifier INS SC15 User Manual
Kenmore Range 7909092 User Manual
Kenwood Speaker KFC W2510 User Manual
KitchenAid Coffeemaker KCM515 User Manual
KitchenAid Oven KEMS378SWH02 User Manual