KDC-4051UG
KDC-4051UR
KDC-4051URY
KDC-415UA
KDC-415UR
KDC-4251URY
KDC-4451UQ
KDC-4551UB
KDC-455UW
KDC-4651URY
CIND-SRETCERIVUERCTION MANUAL
CD-RECEIVER
BEDIENUNGSANLEITUNG
РИAHДИCОПTРPИЕУMKНИЦКИС KЯOMППOAKTЭ–ДKИCСKПAЛMИУATAЦИИ
АІНВТСОМТАРГНУІТКОЦЛАІЯ З ЕКСПЛУАТАЦІЇ
“Made for iPod,”and“Made for iPhone”mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless
performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries.
The“AAC”logo is a trademark of Dolby Laboratories.
This symbol mark indicates that Kenwood manufactured this product so as to decrease
harmful influence on the environment.
Изделие изготовлено в Индонезии
Autogood products Internet store “130”
© 2010 Kenwood Corporation All Rights Reserved.
GET0689-005A (E0/E20)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
CONTENTS
Safety
Preparation
How to attach/detach the faceplate
How to reset your unit
Initial settings before operations
2
4
WARNING
Stop the car before operating the unit.
Important to know...
To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
Caution: Adjust the volume so that you
can hear sounds outside the car. Driving
with the volume too high may cause an
accident.
Basic operations
Getting started
Canceling the display demonstration
Setting the demonstration mode
Adjusting the clock
5
7
Condensation: When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors.
In this case, remove the disc and wait for
the moisture to eporate.
Listening to the radio
8
9
Adjust [SETTINGS] mode settings
Listening to the other external components
Listening to a disc/ USB device/ iPod 10
Start playing a disc
Functions of KDC-4651URY with remote controller
(RC-405)
This unit can only play the CDs with:
Direct Music Search
The illustrations in this manual are
examples used to explain more clearly
how the controls are used. Therefore, what
appears on the illustrations may differ from
what appears on the actual equipment.
A USB connection cable, CA-U1EX (optional
accessory) is required for connecting a USB
device.
Connecting a USB device
Connecting an iPod (KDC-4551UB/ KDC-455UW/
KDC-4651URY only)
Selecting Repeat Play
Selecting Random Play
Selecting Scan Play
Selecting a folder/track/file
Functions of KDC-4551UB/ KDC-455UW
KDC-4651URY with iPod
Alphabet Search and My Playlist for iPod
iPod control by Hand Mode
Adjust [SETTINGS] mode settings
You can connect an Apple iPod/iPhone
with KDC-4551UB/ KDC-455UW/ KDC-4651URY
.
The word“iPod”appearing in this manual
indicates the iPod or iPhone connected
to this unit with a connection cable,
KCA-iP101 (optional accessory).
Function settings
13
Using the remote controller (RC-405) 15
If you experience problems during
installation, consult your Kenwood dealer.
When you purchase external components,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
Detailed information and notes about the
playable audio files are stated in an online
manual on the following site:
Equipped for KDC-4651URY
Troubleshooting
Installation/connection
Basic procedure
Warning
16
17
Caution
Wiring connection
Installing the unit
Removing the unit
Specifications
21
2
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
The marking of products using lasers
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It means
that the unit is utilizing laser beams that
are of a weaker class. There is no danger of
hazardous radiation outside the unit.
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo,
192-8525 Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN,
The Netherlands
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de
yayımlanan Elektrikli ve Elektronik Eşyalarda
Bazı Zararlı Maddelerin Kullanımının
Sınırlandırılmasına Dair Yönetmeliğe uygun
olarak üretilmiştir.
This Product is not installed by the
manufacturer of a vehicle on the production
line, nor by the professional importer of a
vehicle into an EU Member State.
This product complies with Directive,
Number 26891 regarding“REGULATION ON
THE RESTRICTION OF THE USE OF CERTAIN
HAZARDOUS SUBSTANCES IN ELECTRICAL
AND ELECTRONIC EQUIPMENT”.
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection
systems)
Products and batteries with the
symbol (crossed-out wheeled bin)
cannot be disposed as hold
waste.
Old electrical and electronic
equipment and batteries should
be recycled at a facility capable
of handling these items and their
waste byproducts.
Contact your local authority
for details in locating a recycle
facility nearest to you. Proper
recycling and waste disposal will
help conserve resources whilst
preventing detrimental effects on
our health and the environment.
Notice: The sign“Pb”below the
symbol for batteries
Muting upon the reception of a
phone call
To use this feature, connect the MUTE lead
to your telephone using a commercial
telephone accessory. (page 18, 19)
When a call comes in, “CALL”appears.
The audio system pauses.
To continue listen to the audio system
during a call, press SRC. “CALL”
disappear and the audio system resumes.
When a call ends, “CALL”disappear.
The audio system resumes.
indicates that this battery
contains lead.
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Preparation
How to attach/detach the faceplate How to reset your unit
If this unit fails to operate properly, press the
reset button.
1
1
The unit returns to factory
settings when the reset
button is pressed.
2
2
Do not expose the faceplate to direct
Reset button
sunlight, excessive heat, or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
Keep the faceplate in its casing while
detached.
Initial settings before operations
1
2
Press SRC to enter [STANDBY] mode.
Press the volume knob to enter
[FUNCTION] mode.
The faceplate is a precision piece of
equipment and can be damaged by shocks
or jolts.
To prevent deterioration, do not touch the
terminals of the unit and faceplate with
your fingers.
3
4
Turn the volume knob to select
[INITIAL SET], tn press to enter.
Turn the volume knob to make a
selection, then press to confirm.
See table below for selection.
5
Hold
to finish the procedure.
Item
Selectsetting (Preset: *)
PRESET TYPE
NORMAL/ NORM*: Memorizes one station each preset button in each band (FM1/ FM2/ FM3/ MW/
LW). ; MIX: Memorizes one station or eacpreset button regardless of the selected band (FM1/ FM2/
FM3/ MW/ LW).
KEY BEEP
ON*/ OFF: Activates/dethe keypress tone.
RUSSIAN SET
ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
OFF*: Canels.
P-OFF WAIT
Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
––––: Cancels ; 20M*: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILT-IN AUX/ ON1*: Outputs sound of the connected external component through the car speakers when “AUX” is
BUILTIN AUX
selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is
selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no
external component is connected). Turn the volume knob clockwise to return to the previous volume level. ;
OFF: Disables “AUX” in source selection.
CD READ
1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
SWITCH PREOUT/ REAR*/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on
SWITCH PRE
the rear of the unit (through an external amplifier).
SP SELECT
F/W UP xx.xx
OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
YES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated).
[SWITCH PREOUT/ SWITCH PRE] is selectable only with KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/
KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY.
4
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Display window
KDC-4051UG/ KDC-4051UR/ KDC-4051URY/
KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4451UQ:
KDC-4551UB/ KDC-455UW/ KDC-4651URY:
Volume knob
Ejects the disc
Detaches the faceplate
Loading slot
USB terminal
Auxiliary input jack
The illustration and button names or
explanation in this manual ae oKDC-4551UB/
KDC-455UW/ KDC-4651URY (unless mentioned
otherwise).
The following indicator lights up when...
ST
IN
TI
: A stereo broadcast is received.
: A disc is in the unit.
: Traffic Information function is
turned on.
Refer to the table below for the difference:
RDS
: Radio Data System service is
available.
KDC-4051UG/ KDC-4051UR/
KDC-4551UB/
KDC-4051URY/ KDC-415UA/
KDC-455UW/
KDC-4551UB/ KDC-455UW/ KDC-4651URY only:
ATT (blink) : The sound attenuates.
(Applicable only for KDC-4651URY
using the remote controller
(RC-405), page 15.)
KDC-415UR/ KDC-4251URY/
KDC-4651URY
KDC-4451UQ
iPod
3 (ALL RDM)
3
5
EQ
: [SYSTEM Q] is set to an EQ
mode other than [NATURAL].
(page 13)
5
(MEMO MY LIST)
B.BOOST : [BASS BOOST] is set to [1] or
[2]. (page 13)
: In Search Mode or when a
Playlist is displayed.
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
5
When you press or hold the following button(s)...
Button
General operation
Turns on.
Turns off if pressed and held.
Selects the available sources (TUNER, USB or iPod, CD, AUX, STANDBY), if the
power is turned on.
SRC
• If the source is ready, playback also starts. “iPod” and “CD” are selectable only
when an iPod is connected or a disc is loaded.
Volume knob
(turn)
Adjusts the volume level.
Selects items.
Volume knob
(press)
Confirms selection.
Enters [FUNCTION] settings.
Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW.
Selects the next folder.
BAND
6 (
)
Pauses/resumes playback of a disc/ USB device/ iPod.
Searches for radio station.
4
/
¢
Selects track/file.
Fast-forwards/reverses tracks if pressed and held.
Changes the display information.
Scrolls the display information if pressed and held.
Enters clock adjustment mode directly (page 7) if pressed and held while in
clock display screen.
SCRL DISP
iPod
KDC-4551UB/ KDC-455UW/ KC-4651URY only:
Selects“iPod”source.
Switches the olling terminal (HANDS ON/ HANDS OFF) for iPod
playback if pressand held. (page 12)
KDC-4051UG/ KDC-451UR/ KDC-4051URY/ KDC-415UA/ KDC-415UR/ KDC-4251URY/
KDC-4451UQ only: Selects Random Play. (page 11)
Returns to the previous item.
Exit from setting mode if pressed and held.
About “KENWOOD Music Editor”
This unit supports the PC application“KENWOOD Music Editor Light ver1.0”or later.
When you use the audio file with database information added by the“KENWOOD Music
Editor Light ver1.0,”you can search a file by title, album or artist name using Music Search.
In the Instruction manual, the term“USB device”is used to mean the device that contains
audio files with database information added with KENWOOD Music Editor.
“KENWOOD Music Editor Light ver1.0”is available from the following web site:
For further information on“KENWOOD Music Editor Light ver1.0,”refer to the site above or
the application help.
6
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
5
6
7
Turn the volume knob to adjust the
hour, then press to enter minute
adjustment.
Clock minutes flashes on the display.
Turn the volume knob to adjust the
minute, then press to confirm.
Canceling the display
demonstration
The display demonstration is always turned
on unless you cancel it.
When you turn on the power (or after you
reset the unit), the display shows:
[CANCEL DEMO] \ [PRESS] \
[VOLUME KNOB]
Press 4
hour and minute adjustment.
Hold to finish the procedure.
/
¢ to move between the
1
Press the volume knob.
[YES] is selected as the initial setup.
Press the volume knob again to confirm.
[DEMO OFF] appears.
If no operation is done for about
15 seconds or if you turn the volume knob
2
Maintenance
Cleaning the unit: Wipe off the dirt on the
panel with a dry silicon or soft cloth. Failure
to observe this prection may result in
damage to the monitor or unit.
to select [NO] in step 2, [DEMO MODE]
appears and the display demonstration
starts.
Cleaning the connector: Wipe off dirt on
the connector of the unit and faceplate.
Use a cotton swab or cloth.
Setting the demonstration mode
1
2
3
Press the volume knob to enter
[FUNCTION].
Turn the volume knob to select
[DEMO MODE], then press to er.
Turn the volume knob to selecor
[OFF].
If [ON] is selected, display demonstration
starts if no operation is done for about
20 seconds.
andling discs
Do not touch the recording surface of
the disc.
Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and
move outward.
Clean the disc with a dry silicon or soft
cloth. Do not use any solvents.
When removing discs from this unit, pull
them out horizontally.
Remove the rims from the center hole
and disc edge before inserting a disc.
4
Hold
to finish the procedure.
Adjusting the clock
1
2
3
4
Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
[SETTINGS], then press to enter.
Turn the volume knob to select [CLOCK],
then press to enter.
Turn the volume knob to select [CLOCK
ADJUST/ CLOCK ADJ], then press to
enter.
Clock hour flashes on the display.
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Listening to the radio
Hold to turn on or off the Traffic Information function (not applicable if“MW/ LW”is selected).
Hold for about 2 seconds to memorize the current station or the selected Program
Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)
Press briefly to recall memorized station (or Program Type after entering the PTY
search mode).
1
2
3
Press SRC to select “TUNER.”
Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).
Press 4 ¢ to search for a station.
/
Adjust [SETTINGS] mode settings
While listening to the radio...
1
2
3
Press the volume knob to enter [FUNCTIOode.
Turn the volume knob to select [SETTINGS], then press to enter.
Turn the volume knob to make a selection, then press to confirm.
See table below for selection
4
Hold
to finish the procedur
Item
Selectable setting (Preset: *)
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF*: Cancels.
SEEK MODE Selects the tuning mode for buttons.
4
/
¢
AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
AUTO
YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic memorizing
MEMORY
is not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 4)
MONO SET
ON: Improves the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes).
PTY SEARCH Selects the available Program Type (page 9). Then, press
4
/
¢
to start searching.
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH*/ FRENCH/ GERMAN), then press to confirm.
NEWS SET
AF SET
00M – 90M: Sets the time for receiving the next news bulletin. ; OFF*: Cancels.
ON*: Automatically searches for another station broadcasting the same program in the same Radio Data
System network with better reception when the current reception is poor. ; OFF: Cancels.
8
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Selectable setting (Preset: *)
RDS REGIONAL/ ON*: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.
RDS REG
AUTO TP SEEK/ ON*: Automatically searches for a station with better reception when the traffic information‘s reception is
ATP SEEK
poor. ; OFF: Cancels.
[PTY SEARCH] is selectable only when the source is “FM.”
[NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only when the source is “FM.” If
other playback source is selected, these settings are selectable under [RDS SET] item. (page 14)
Available Program Type:
SPEECH
DRAMA
MUSIC
CULTURE
LIGHT M (music) CLASSICS
NEWS
AFFAIRS
VARIED
INFO
SPORT
EDUCATE
SCIENCE
POP M (music) ROCK M (music) EASY M (music)
OTHER M (music) WEATHER
TRAVEL
FINANCE
JAZZ
CHILDREN
COUNTRY
SOCIAL
NATION M (music)
RELIGION
OLDIES
PHONE IN
FOLK M (music) DOCUMENT
LEISURE
The unit will search for the Program type categorized under [SPEECH] or [MUSIC] if selected.
[SPEECH] : White character item. ; [MUSIC] : Black character item.
The Radio Data System feature won't work where the service is not ported by any
broadcasting station.
If the volume is adjusted during reception of traffic information, the adjusted volume is
memorized automatically. It will be applied the next tme Traffic Information function is
turned on.
Listening to the oter external
components
Preparation : Make sure [ON1] or ] is selected for [BUILT-IN AUX/ BUILTIN AUX].
(page 4)
Auxiliary input jack
1
2
Press SRC to select “AUX.”
Turn on the external component and
start playing.
3
Turn the volume knob to adjust the
volume.
3.5 mm stereo mini plug
(optional accessory)
Portable audio device
(optional accessory)
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Listening to a disc/ USB device/ iPod
Ejects the disc. (“NO DISC”appears and“IN”indicator goes off.)
Press to select track/file.
Hold to fast-forwards/reverses.
USB terminal
Press to select next folder.
lide open the cover.
Start playing a disc
1
2
Press SRC to turn on the power.
Insert a disc into the loading slot.
Playback starts automatically.
Connecting a USB
device
3
Press number button 6 (
) to
resume/pause playback (if necessary).
CA-U1EX
(optional accessory)
USB device (optional accessory)
Connecting an iPod
(KDC-4551UB/ KDC-455UW/
KDC-4651URY only)
Functions of KDC-4651URY with remote
controller (RC-405)
Direct Music Search
• Not available if Random Play, Scan Play,
Apple iPod
(optional accessory)
iPod playback is selected.
1
Press DIRECT to enter Direct Music
Search Mode.
KCA-iP101
(optional accessory)
“– – –” appears.
2
3
Press the number buttons to enter the
track number.
Press 4 / ¢ to search for the music.
The source automatically switches, and
playback starts.
To cancel the Direct Music Search Mode,
press
or EXIT.
10
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
To return to the root folder (or first track for
audio CD), press BAND.
Selecting Repeat Play
Press number button 4 (REP) repeatedly
to make a selection.
To return to the previous folder, press
.
To cancel the Music Search mode, press
Audio CD : TRACK/ TRAC (track) REPEAT,
REPEAT OFF
AAC/MP3/WMA :
FILE REPEAT, FOLD (folder) REPEAT,
REPEAT OFF
iPod : FILE REPEAT, REPEAT OFF
and hold
.
< or > on the display indicates that
preceded/next item is available.
For USB device* and iPod: To skip search,
press 4 / ¢.
* This operation is effective only for the files
registered in the database created with
Kenwood Music Editor. (page 6)
Selecting Random Play
Press number button 3 (ALL RDM) or
repeatedly to make a selection.
KDC-4551UB/ KDC-455UW/ KDC-4651URY only: To
return to the top menu while in the search
mode of an iPod, press BAND.
Audio CD : DISC RANDOM, RANDOM OFF
AAC/MP3/WMA/iPod :
FOLDER/ FOLD (folder) RANDOM,
RANDOM OFF
Discs that cannot bused
Discs that are not und.
Press and hold number button
Discs with coloring on the recording
surface or discs that are dirty.
You cannot play a Recordable/ReWritable
disc that has not been finalized. (For the
finalization process refer to your disc
riting software, and your disc recorder
instruction manual.)
3-inch CD cannot be used. Attempt
to insert using an adapter can cause
malfunction.
3 (ALL RDM) or
to select
“ALL RANDOM.”
– Applicable only if“RANDOM OFF”is
selected initially.
–
KDC-4551UB/ KDC-455UW/ KDC-4651URY only:
Changes the iPod browsing item to
“songs.”
Selecting Scan Play
Press number button 2 (SCAN)
repeatedly to make a selection.
About USB device
This unit can play AAC/MP3/WMA files
stored on a USB mass storage class
device.
Install the USB device in the place where
it will not prevent you from driving your
vehicle properly.
You cannot connect a USB device via a
USB hub and Multi Card Reader.
Make sure all important data has been
backed up to avoid losing the data.
Connecting a cable whose total length is
longer than 5 m can result in abnormal
playback.
Audio CD : TRACK/ TRAC (track) SCAN,
SCAN OFF
AAC/MP3/WMA : FILE SCAN, SCAN OFF
If scan play is selected, the unit starts
playing the first 10-second intro of the
music in the disc/current folder.
If “SCAN OFF”is selected, the unit resumes
normal play of the current song.
Selecting a folder/track/file
1
Press
to enter Music Search mode.
“SEARCH” appears, then the current file
name appears on the display.
2
Turn the volume knob to select a folder/
track/file, then press to confirm.
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Functions of KDC-4551UB/ KDC-455UW/ KDC-4651URY with iPod
Alphabet Search and My Playlist
for iPod
Playing a song on the playlist
1
Press number button 5 (MEMO MY LIST)
to display the playlist.
Selecting a song by alphabet
“MY PLAYLIST” appears.
1
2
3
Press
“SEARCH” appears.
Turn the volume knob to select a
category, then press to confirm.
Press
to enter Music Search mode.
2
Turn the volume knob to select the song
you want, then press to confirm.
Random play cannot be performed during
playback of a song in the playlist.
again to enter alphabet search
mode.
“SEARCH <
Deleting a song on the playlist
>” appears.
– – –
1
2
3
Press number button 5 (MEMO MY LIST)
to display the playlist.
“MY PLAYLIST” appears.
Turn the volume knob to select the song
you want to delete, then press and hold
the volume kn
Turn the volume knob to select
“DELETE ONE” or “DELETE ALL,” then
press to confirm.
4
5
Turn the volume knob to select the
character to be searched for.
Press 4 / ¢ to move to the entry
position.
You can enter up to three characters.
Press the volume knob to start
searching.
6
To cancel the Alphabet Search mode, press
and hold
.
Select “DELETE ALL” to delete all the songs
in the playlist.
Turn the volume knob to select “YES,”
then press to confirm.
“COMPLETE” appears.
A longer searching time is required if there
are many songs or playlists in the iPod.
To search for a character other than A to Z
and 0 to 9, enter only“ ”.
*
The article (a, an, the) of songs name will
be skipped during search.
iPod control by Hand Mode
Press and hold iPod to enter iPod mode.
Registering songs in the playlist
1
Select and play the song you want to
register. (page 11)
HANDS ON :
Control iPod from the iPod. “iPod MODE”
appears on the display.
HANDS OFF: Control iPod from the unit.
2
Press and hold number button
5 (MEMO MY LIST) to register.
“## STORED” (registration number)
appears.
You can register up to 10 songs. “MEMORY Adjust [SETTINGS] mode settings
FULL” appears, if you try to register the
eleventh song.
While listening to an iPod...
1
2
3
Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
[SETTINGS], then press to enter.
Turn the volume knob to make a
selection, then press to confirm.
See the following table for selection.
If you attempt to register a song from
a different iPod, “NO INFO”followed by
“MPLIST DELETE”appears.
To delete the playlist, turn the volume knob
to select“YES,”then press to confirm.
You can also register the song displayed in
the Music Search mode by following the
same procedure.
4
Hold
to finish the procedure.
Do not register Podcasts.
12
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of KDC-4551UB/ KDC-455UW/ KDC-4651URY with iPod
Item
Selectable setting (Preset: *)
SKIP SEARCH 0.5%*/ 1%/ 5%/ 10%: Sets the ratio of skip when searching for a song in Music Search mode.
(Holding 4 / ¢ skips songs at 10% regardless of the setting made.)
MPLIST DELETE YES: Deletes the saved My Playlist. ; NO*: Cancels.
About compatible iPod/iPhone
Made for
For the latest compatible list and software
version of iPod/iPhone, see:
If you start playback after connecting the
iPod, the music that has been played by
the iPod is played first.
– iPod touch (1st, 2nd, and 3rd generation)
– iPod classic
– iPod with video
– iPod nano (1st, 2nd, 3rd, 4th, and 5th
generation)
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
In this case, “RESUMING”is displayed
without displaying a folder name, etc.
Changing the broitem will display a
correct title, etc.
You cannot operate iPod if“KENWOOD”or
“✓”displayed on iPod.
Function settings
1
2
Press the volume knob to enter [FUNCTION] mode.
Turn the volume knob to seleUDIO CONTROL/ AUDIO CTRL] or [SETTINGS], then
press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
See table below for election.
Repeat step 3 until the desired item is selected/activated.
Press
to return to the previous item.
4
Hold
to finish the procedure.
[AUDIO CONTROL/ AUDIO CTRL] : While listening to any source except in STANDBY state...
Item
SUB-W LEVEL
BASS BOOST
SYSTEM Q
Selectable setting (Preset: *)
–15 — +15 (Preset: 0): Adjusts the subwoofer output level.
B.BOOST LV1*/ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.
NATURAL*/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to
the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS CTR FRQ/ BASS C FRQ: 60/ 80/ 100*/ 200: Selects the center frequency.
BASS LEVEL: –8 — +8 (Preset: 0): Adjusts the level.
BASS ADJUST
BASS Q FACTOR/ BASS Q FCTR: 1.00*/ 1.25/ 1.50/ 2.00: Adjusts the Q factor.
BASS EXTEND: ON: Turns on the extended bass. ; OFF*: Cancels.
Continued...
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Item
MID ADJUST
Selectable setting (Preset: *)
MIC CTR FRQ/ MID C FRQ: 0.5K/ 1.0K*/ 1.5K/ 2.5K: Selects the center frequency.
MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level.
MID Q FACTOR/ MID Q FCTR: 0.75/ 1.00*/ 1.25: Adjusts the Q factor.
TRE CTR FRQ/ TRE C FRQ: 10.0K/ 12.5K*/ 15.0K/ 17.5K: Selects the center frequency.
TRE LEVEL: –8 — +8 (Preset: 0): Adjusts the level.
TRE ADJUST
BALANCE
FADER
L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.
R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.
SUBWOOFER SET/ SUB-W SET
DETAILED SET/ DETAIL SET
ON*: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER/ THROUGH*: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher
LPF SUB-W:
than 85 Hz/ 120 Hz/ 160 Hz are cut off.
SUB-W PHASE:
REVERSE/ REV (180°) NORMAL/ NORM (0°)* Selects the phase angle of the subwoofer
/
:
output to be in line with the speaker output for optimum performance. (Selectable only if a
setting other than [THROUGH] is selected for [LPF SUBWOOFER/ LPF SUB-W].)
ON*: Creates realistic sound by interpolating the high-frequey components that are lost in
AAC/ MP3/ WMA audio compression. ; OFF: Cancels. (Seleble only when playback an AAC/
MP3/ WMA disc or a USB device, except iPod.)
SUPREME SET:
VOLUME OFFSET/ –8 — +8 (for AUX) ; –8 — 0 (for other sources) Presets the volume adjustment level of
:
VOL OFFSET:
(Preset: 0)
each source. The volume level will automatically increase or decrease when you change the
source. (Before making an adjustment, select the source you want to adjust.)
Select a source before making a source tone memory adjusBASS ADJUST/ MID ADJUST/ TRE ADJUST].
KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY
only:
[SUB-W LEVEL/ SUBWOOFER SET/ SUBET/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if
[SWITCH PREOUT/ SWITCH PRE] is set to W]. (page 4)
[SUB-W LEVEL/ LPF SUBWOOFER/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUBWOOFER SET/ SUB-W SET] is
set to [ON].
[SETTINGS]
Item
Selectable setting (Preset: *)
AUX NAME SET/ AUX*/ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.
AUX NAME
CLOCK
(Selectable only if “AUX” is selected as the source.)
CLOCK ADJUST/ CLOCK ADJ: (For details, see page 7.)
TIME SYNC:
ON*: Synchronizes the Radio Data System station time data and the unit’s clock. ;
OFF: Cancels.
DISPLAY
RDS SET
DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.
TEXT SCROLL: AUTO/ ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF*: Cancels.
NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK: Selectable only if any source
other than tuner source is selected. (For details, see page 8, 9.)
14
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote controller (RC-405)
Equipped for KDC-4651URY
Remote sensor
Do not expose to bright sunlight.
Preparation:
When you use the remote controller for the
first time, pull out the insulation sheet.
Insulation sheet
Basic operations:
If the effectiveness of the remote
controller decreases, replace the battery.
VOL
: Selects the available sources.
: Adjusts the volume level.
5 / ∞ : Selects folders/files (in Music
Search mode).
4
2
ENT
:
Pauses/resumes playback.
Confirms selection (in Music
Search mode).
*AM– / #FM+: Selects bands.
Selects folders.
1
Caution:
4 / ¢ (+): Searches for radio station.
Selects track/file.
Do not set the remote control in hot places
such as on the dashboard.
Lithium battery.
1 – 6
AUD
: Selects preset station.
: Enters [AUDIO CONTROL]
settings directly.
: Attenuates the sound. (To return
to the previous level, press the
button again.)
Danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
The battery pack or batteries shall not be
exposed to excessive heat such sunshine,
fire or the like.
ATT
: Returns to the previous item (in
Music Search mode).
Keep battery out of reach of children and in
original package until ready to use. Dispose
of used batteries promptly. If swallowed
contact physician immediately.
EXIT
: Exit from setting mode.
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Troubleshooting
Symptom
Remedy/Cause
Adjust the volume to the optimum level. / Check the cords and connections.
“PROTECT” appears and no operations can Check to be sure the terminals of the speaker leads are covered with insulating
Sound cannot be heard.
be done.
tape properly, then reset the unit. If “PROTECT” does not disappear, consult your
nearest service center.
The unit does not work at all.
Reset the unit.
[P-OFF WAIT] does not work.
Turn off the demonstration mode. (page 7)
Radio reception is poor. / Static noise while Connect the antenna firmly. / Pull the antenna out all the way.
listening to the radio.
“IN” flashes.
The CD player is not operating properly. Reinsert the disc properly. If the condition
did not improve, turn off the unit and consult your nearest service center.
CD-R/CD-RW cannot be played back and Insert a finalized CD-R/CD-RW (finalize with the component which you used for
tracks cannot be skipped.
recording).
Disc sound is sometimes interrupted.
Stop playback while driving on rough roads. / Cange the disc. / Check the cords
and connections.
“NA FILE” appears.
“NO DISC” appears.
“TOC ERROR” appears.
The unit is playing an unsupported audio fie.
Insert a playable disc into the loading slot.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try
another disc instead.
“ERROR 99” appears.
The unit is malfuning for some reason. Press the reset button on the unit. If
the “ERROR 99” coes not disappear, consult your nearest service center.
A copy-protectefile is played.
“COPY PRO” appears.
“READ ERROR” appears.
py the files and folders for the USB device again. If the error message is still
ed, initialize the USB device or use other USB devices.
No USB device is connected. Connect an USB device, and change the source to
USB again.
“NO DEVICE” appears.
“NO MUSIC” appears.
“NA DEVICE” appears.
“USB ERROR” appears.
The connected USB device contains no playable audio file.
Connect a supported USB device, and check the connections.
Remove the USB device, turn the unit off, then turn it on again. If the unit still
showing the same display, try to connect another USB device.
Reconnect the iPod. / Confirm that the software for the iPod is the latest version.
Skip to another track or change the disc.
“iPod ERROR” appears.
Noise is generated.
Tracks cannot play back as you have
intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing.
Elapsed playing time is not correct.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
The number of songs contained in “SONGS” Podcast files are not counted in this unit as this unit does not support the
category of this unit is different from that playback of podcast files.
contained in “SONGS” category of iPod.
Correct characters are not displayed (e.g. This unit can only display letters (upper case), numbers, and a limited number of
album name).
symbols. Cyrillic alphabets (upper case) can also be displayed if [RUSSIAN SET]
is set to [ON]. (page 4)
16
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/connection
Part list:
Caution
A Faceplate.............................................................. (×1)
If your car's ignition does not have an ACC
B Escutcheon......................................................... (×1)
C Mounting sleeve............................................. (×1)
D Casing for faceplate ...................................... (×1)
E Wiring harness.................................................. (×1)
F Removal tool .................................................... (×2)
position, connect the ignition wires to a
power source that can be turned on and
off with the ignition key. If you connect
the ignition wire to a power source with
a constant voltage supply, as with battery
wires, the battery may die.
Do not use your own screws. Use only the
screws provided.
Install this unit in the console of your
vehicle. Make sure the faceplate will not hit
the lid of the console (if any) when closing
and opening.
Basic procedure
1
Remove the key from the ignition
switch, then disconnect the · terminal
of the car battery.
2
Make proper input and output wire
connections.
\ “Wiring connection” (page 18, 19)
Install the unit to your car.
\ “Installing the unit” (page 20)
Reconnect the · terminal of the car
battery.
After the unit is insed, check whether
the brake lamps, blinkers, wipers, etc. on
the car are working properly.
Mount the unit so that the mounting angle
is 30° or less.
If the fuse blows, first make sure the wires
e not touching to cause a short circuit,
then replace the old fuse with one that has
the same rating.
Connect the speaker wires correctly to the
terminals to which they correspond. The
unit may be damaged or fail to work if you
share the · wires or ground them to any
metal part in the car.
When only two speakers are being
connected to the system, connect the
connectors either to both the front output
terminals or to both the rear output
terminals (do not mix front and rear).
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
3
4
5
Reset the unit. (page 4)
Warning
The unit can only be installed in a car with
a 12 V DC power supply, negativund.
If you connect the ignition wire (rend
the battery wire (yellow) to the car chassis
(ground), you may caue a short circuit,
that in turn may start a fire. Always connect
those wires to the power source running
through the fuse box.
Disconnect the battery's negative terminal
and make all electrical connections before
installing the unit.
Insulate unconnected wires with vinyl tape
or other similar material. If no connections
are made, do not let the wire come out
from the tab to prevent short circuit.
Be sure to ground this unit to the car's
chassis again after installation.
Mounting and wiring this product requires
skills and experience. For safety's sake, leave
this work to professionals.
If you experience problems during
installation, consult your Kenwood dealer.
Autogood products Internet store “130”
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Wiring connection
For KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/
KDC-455UW/ KDC-4651URY
KDC-4251URY/ KDC-4651URY
KDC-4051UG/ KDC-4051UR/ KDC-415UA/
KDC-415UR/ KDC-4551UB/ KDC-455UW
Front output terminals
Rear/subwoofer output terminals
Rear/subwoofer output
terminals
Fuse (10 A)
Antenna terminal (JASO)
KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/
KDC-4551UB/ KDC-455UW/ KDC-4651URY: To the
steering wheel remote contropter (optional accessory)
Light blue/yellow
(Steering remote control wire)
Blue/White
(Power control/motor antenna
control wire)
To the power control terminal when using the optional power
amplifier, r to the antenna control terminal in the vehicle.
erminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Brown
(Mute control wire)
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
Yellow (Battery wire)
Red (Ignition wire)
wiring harness as illustrated below.
Ignition wire
(Red)
A7 (Red)
Vehicle
A4 (Yellow)
Red (A7)
Unit
Yellow (A4)
Battery wire
(Yellow)
ISO connectors
Default wiring
Pin
A4
A5
A7
A8
Color and function
Pin
B1 / B2 Purple
Color and function
Yellow
Battery
ª
/ Purple/black
·
Rear speaker (right)
Front speaker (right)
Front speaker (left)
Rear speaker (left)
Blue/White Power control
B3 / B4 Gray
B5 / B6 White
B7 / B8 Green
ª
/ Gray/black
·
Red
Black
Ignition (ACC)
Earth (ground) connection
ª
ª
/ White/black
/ Green/black
·
·
18
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
For KDC-4051URY/ KDC-4451UQ
Fuse (10 A)
Antenna terminal (JASO)
White (+) / White/black (–) : To front speaker (left)
Gray (+) / Gray/black (–) : To front speaker (right)
Green (+) / Green/black (–) : To rear speaker (left)
Purple (+) / Purple/black (–) : To rear speaker (right)
Blue
To the antenna control terminal in the vehicle.
(Motor antenna control wire)
Blue/White
(Power control wire)
To the power control terminal when using the optional power amplifier.
To he terminal that is grounded when either the telephone rings or
during conversation. (To connect the Kenwood navigation system,
consult your navigation manual.)
Brown
(Mute control wire)
Car fuse box
Ignition key switch
Red (Ignition wire)
Yellow (Battery wire)
Car fuse box
Battery
Black (Ground wire)
To the metallic body or chassis of the car
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Installing the unit
1
Connect the wiring harness to the unit. Other wiring
connection has been completed earlier. (page 18, 19)
2
Before attaching, make sure the direction of
the escutcheon is correct. (Wider hooks on
the top side.)
Dashboard of your car
Bend the appropriate tabs to hold the
mounting sleeve firly in place.
Removing the unit
1
Detach the faceplate.
2
Engage the catch pin on the removal
tools into the holes on both sides of he
escutcheon, then pull it out.
Insert the removal tools deeo
the slots on each side, then follthe
arrows instructions as shown on the
right.
3
About Audio file
Playable Audio file: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
Playable disc media: CD-R/RW/ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device file system: FAT16, FAT32
Although the audio files are complied with the standards listed above, the play maybe
impossible depending on the types or conditions of media or device.
20
Autogood products Internet store “130”
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
FM tuner section
USB interface
Frequency range:
FM1/ FM2/ FM3 (50 kHz space):
87.5 MHz — 108.0 MHz
USB standard: USB1.1/ 2.0 (Full speed)
Maximum supply current: 500 mA
File system: FAT16/ 32
For KDC-4451UQ
FM1/ FM2 (50 kHz space):
:
AAC decode: AAC-LC“.m4a”files
MP3 decode: Compliant with MPEG-1/2 Audio
Layer-3
87.5 MHz — 108.0 MHz
FM3 (30 kHz space):
WMA decode: Compliant with Windows
Media Audio
65.00 MHz — 74.00 MHz
Usable sensitivity (S/N= 26 dB): 1.0 μV/75 Ω
Quieting sensitivity (DIN S/N = 46 dB): 2.5 μV/75 Ω
Frequency response ( 3 dB): 30 Hz — 15 kHz
Signal-to-Noise ratio (MONO): 63 dB
Stereo separation (1 kHz): 40 dB
Audio section
Maximum output power: 50 W × 4
Output power (DIN 45324, +B = 14.4 V): 30 W × 4
Speaker impedance: 4 Ω — 8 Ω
Tone action: Bass: 0 Hz 8 dB
Middle: 1 kHz 8 dB
MW tuner section
Frequency range (9 kHz space):
531 kHz — 1 611 kHz
Usable sensitivity (S/N= 20 dB): 36 μV
Treble: 10 kHz 8 dB
For KDC-4051UG/ KDC-4051UR/ KDC-415UA/
KDC-415UR/ KDC-4251URY/ KDC-4551UB/
KDC-455UW/ KDC-4651URY
:
Preout level / load (CD): 2 000 mV/10 kΩ
Preout impedance: ≤ 600 Ω
LW tuner section
Frequency range: 153 kHz — 279 kHz
Usable sensitivity (S/N = 20 dB): 57 μV
Auxiliary input section
Frequency response ( 3 dB): 20 Hz — 20 kHz
Input maximum voltage: 1 200 mV
Input impedance: 10 kΩ
CD player section
Laser diode: GaAIAs
Digital filter (D/A): 8 Times Over Sampling
D/A converter: 24 Bit
Spindle speed: 500 rpm — 200 rpm (CLV)
Wow & Flutter: Below Measurable Limit
Frequency response ( 1 dB): 20 Hz — 20 kHz
Total harmonic distortion (1 kHz): 0.01 %
Signal-to-Noise ratio (1 kHz): 105 dB
Dynamic range: 90 dB
General
Operating voltage (11 V — 16 V allowable): 14.4 V
Maximum current consumption: 10 A
Installation size (W × H × D):
182 mm × 53 mm × 158 mm
Weight: 1.3 kg
AAC decode: AAC-LC“.m4a”files
MP3 decode: Compliant with MPEG-1/2 Audio Subject to change without notice.
Layer-3
WMA decode: Compliant with Windows
Media Audio
Autogood products Internet store “130”
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|