AUDIO VIDEO SURROUND RECEIVER
-
KRF V7070D
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain
a proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
B60-5349-00 00 MA (E)
0209
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Contents
Caution : Read the pages marked
safe operation.
carefully to ensure
Before applying the power .............................. 2
Safety precautions ............................................. 2
How to use this manual..................................... 2
Unpacking .......................................................... 4
Preparing the remote control ............................ 4
Special features ................................................. 5
Names and functions of parts ......................... 6
Main Unit ........................................................... 6
Remote control unit ........................................... 7
Setting up the system........................................ 8
Connecting the terminals .................................. 9
Connecting audio components........................ 10
Connecting video components........................ 11
Digital connections .......................................... 12
Connecting a DVD player (6-channel input)..... 13
Connecting the speakers ................................. 14
Connecting to the AV AUX jacks ..................... 15
Connecting the antennas................................. 15
Connecting the system control ....................... 16
Preparing for surround sound ....................... 17
Speaker settings .............................................. 17
Basic remote control operations for other
components....................................................... 35
Registering setup codes for other
components ..................................................... 35
Searching for your code................................... 35
Checking the codes ......................................... 35
Re-assigning device keys ................................ 36
Operating other components .......................... 36
Setup code chart.............................................. 37
CASSETTE deck, CD player & MD recorder
operations ........................................................ 42
Other components’ operations ....................... 43
Remote
Control
Preparations
In case of difficulty.......................................... 45
Specifications .................................................. 47
Additional
Information
Normal playback.............................................. 20
Preparing for playback ..................................... 20
Listening to a source component .................... 20
Adjusting the sound ......................................... 21
Recording .......................................................... 23
Recording audio (analog sources) ................... 23
Recording video ............................................... 23
Recording audio (digital sources) .................... 23
Listening to radio broadcasts ....................... 24
Tuning (non-RDS) radio stations ...................... 24
Using RDS (Radio Data System) ..................... 24
Presetting radio stations manually .................. 25
Receiving preset stations ................................ 25
Receiving preset stations in order (P.CALL) ... 25
Using the RDS DISP (Display) key .................. 26
Presetting RDS stations (RDS AUTO
Operations
MEMORY) ........................................................ 26
Tuning by Program TYpe (PTY search) ............ 27
Ambience effects ............................................. 28
Surround modes .............................................. 28
Surround play ................................................... 31
DVD 6-channel playback .................................. 32
Convenient functions....................................... 32
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Unpacking
Preparing the remote control
Unpack the unit carefully and make sure that all accessories are
present.
Loading the batteries
1 Remove the cover.
2 Insert the batteries.
FM indoor antenna (1)
AM loop antenna (1)
3 Close the cover.
Remote control unit (1)
RC-R0823
Batteries (R6/AA) (2)
If any acccessories are missing, or if the unit is damaged or fails to
operate, notify your dealer immediately. If the unit was shipped to you
directly, notify your shipper immediately. Kenwood recommends that
you retain the original carton and packing materials in case you need to
move or ship the unit in the future.
• Insert two AA-size (R6) batteries as indicated by the polarity markings.
Operation
Keep this manual handy for future reference.
When the STANDBY indicator is lit, the power turns ON when you press
RCVR
the POWER
key on the remote control. When the power comes
ON, press the key you want to operate.
Remote sensor
Operating range
(Approx.)
6 m
POWER RCVR
Infrared ray system
• When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
Notes
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
Memory back up function
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to prevent
malfunction.
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
• Power mode.
• Distance setting.
• Input selector settings.
• Picture output.
• Input mode setting.
• Midnight mode setting.
• PRO LOGIC II mode setting.
• CS II mode setting.
• Speaker ON/OFF.
• Volume level.
• BASS, TREBLE, INPUT level. • Broadcast band.
• TONE ON/OFF.
• LOUDNESS ON/OFF.
• Dimmer level.
• Frequency setting.
• Preset stations.
• Tuning mode.
• MD/TAPE settings.
• Listen mode setting.
• Speaker settings.
• SW RE-MIX ON/OFF.
• DSP mode.
• ACTIVE EQ mode.
• SPEAKER EQ mode.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Special features
True home theater sound
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and
DSP surround modes
The DSP (Digital Signal Processor) used for this receiver incorporates
a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ
CLUB”, “THEATER”, “STADIUM” and “DISCO”. It is compatible with
almost any kind of program source.
enjoy!
•
Dolby Digital and Dolby Digital EX
DVD 6-channel input
The DOLBY DIGITAL mode lets you enjoy full digital surround from
software processed in the Dolby Digital format. Dolby Digital provides
up to 5.1 channels of independent digital audio for better sound quality
and more powerful presence than conventional Dolby Surround.
As for Dolby Digital EX, it creates six full-bandwidth output channels
from the 5.1 channel sources. This is done using a matrix decoder that
derives three surround channels from the two in the original recording.
Forbestresults,DolbyDigitalEXshouldbeusedwithmoviesoundtracks
recorded with Dolby Digital Surround EX.
If you own a DVD player equipped with 6-channel output, this receiver
allows you to obtain the full surround sound impact of DVD source
material featuring multi-channel encoding. Since the source signals are
digital and each channel is input independently, the resulting ambience
is far superior to what can be achieved with conventional surround
sound systems.
ACTIVE EQ
ACTIVE EQ mode will produce a more dynamic sound quality in any
condition. You can enjoy a more impressive sound effect when ACTIVE
EQ is turned on during Dolby Digital and DTS playback.
Dolby PRO LOGIC II
Dolby PRO LOGIC II, whilst totally compatible with its predecessor
PRO LOGIC, provides greater advantages in surround sound. It allows
the user to enjoy the conventional stereo or Dolby Surround with a
convincing“5.1like”presentation.PROLOGICII offersspecialfeatures
for controlling the overall spatial, dimensionality and frontal sound field
imaging. PRO LOGIC II produces an impressive surround sound from
SPEAKER EQ
SPEAKER EQ function is to adjust the receiver’s audio output
characteristics with the speakers’ characteristics which differs
depending on the size of the speakers. Especially for the music sound
source playback, the reproduced sound becomes more natural when
adjusting the output characteristics. When activating the SPEAKER EQ
function, you will be able to enjoy a more natural and dynamic sound
experience even with small size speakers.
video software marked
and three-dimensional space
from music CD. When listening to music, you will be able to enjoy the
experience of sheer STEREO surround sound.
DTS
Universal IR (InfraRed) remote control
DTS (Digital Theater System) is a 5.1 channel digital audio format that
providesfivefull-spectrumchannelsandonelow-frequency(subwoofer)
channel for unprecedented clarity, optimum channel separation and a
(wide) dynamic range.
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio
and video components. Just follow the simple setup procedure to
register the components you have connected.
In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or
DVDdisc(carryingthe“DTS”marking)canbeplayedinDigitalSurround.
Important:
When a DTS disc is played on a CD, LD or DVD player, noise may be
output from the analog output. It is recommended that you connect the
digital output of the player to the digital input of this unit.
RDS (Radio Data System) tuner
The receiver is equipped with an RDS tuner that provides several
convenient tuning functions: RDS Auto Memory, to automatically
preset up to 40 RDS stations broadcasting different programs; station
name display, to show you the name of the current broadcast station;
and PTY search to let you tune stations by program type.
SRS Circle Surround II
SRSCircleSurroundII ™improvesonitspredecessorCS-5.1™resulting
intheCS-6.1™system, enablingyoutolistentorealistic, multi-channel,
surroundsoundplaybackfromastereosourceorconventionalsurround-
encoded video source. You already enjoy listening to Dolby digital/DTS
multi-channel sound with your multi-speakers. Now you can listen to
audio CDs, MDs, Broadcast and Home Theater using your multi-
speakers. You will discover a new type of sound through SRS Circle
Surround II .
PTY (Program TYpe) search
Tune the stations by specifying the type of program you want to hear.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Main unit
CLIP
Input mode
MUTE
indicator
Listen mode
indicators
Speaker
indicators
indicator indicators
RDS indicators
DTS DOLBY DIGITAL STEREO
RDS
PTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
AUTO indicator
MEMORY indicator
A
B
CLIP
COAXIAL
ANALOG
DSP MODE
PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMORY
STEREO
TUNED
LFE
STEREO indicator
TUNED indicator
SL
S
SB
SR
Speaker selection indicators
Input channel indicators
Output channel indicators
Frequency display
Input display
Preset channel display
Surround mode display
Display
VOLUME CONTROL
STANDBY
DSP
DOLBY DIGITAL
SPEAKER EQ
ACTIVE EQ
DTS
ON/STANDBY
CSII
A
SPEAKERS
B
LOUDNESS SPEAKER EQ ACTIVE EQ
DSP
STEREO INPUT MODE DIMMER
DOWN
UP
MUTE
MULTI CONTROL
LISTEN MODE
DVD/6CH
CD/DVD
PHONO
TUNER
POWER
SOUND TONE SETUP
BAND AUTO MEMORY
AV AUX
-
ON
–OFF
S
VIDEO
VIDEO
L-AUDIO-R
PHONES
VIDEO
1
VIDEO
2
VIDEO
3
MD/TAPE
1 POWER ON/OFF key
Use to turn the main power on or off.
2 ON/STANDBY key
Use to turn the power ON/STANDBY when
the POWER is turned on.
STANDBY indicator
3 A SPEAKERS B keys
Use to turn the A/B speakers on or off.
4 LOUDNESS key
Use to switch the status of LOUDNESS.
5 SPEAKER EQ key
Use to select SPEAKER EQ’s setting.
6 Surround LED (lighting-emitting diode)
indicators
DSP mode LED indicator
Lights when the receiver is in the DSP mode.
SPEAKER EQ mode LED indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode LED indicator
⁄
Lights when the receiver is in the Dolby
Digital mode.
&
&
CS II mode LED indicator
Lights when the receiver is in the CIRCLE
SURROUND II mode.
7 ACTIVE EQ key
Use to select ACTIVE EQ’s setting.
8 DSP key
Use to select any of the DSP mode.
9 STEREO key
Use to switch the listen mode to STEREO.
0 INPUT MODE key
Use to switch between the full auto, digital
and analog inputs.
! DIMMER key
Use to select the REC MODE.
⁄
& BAND key
Use to select the broadcast band.
* AUTO key
Use to select the auto or manual tuning
mode.
( TONE key
Use to switch the status of TONE control.
) MEMORY key
¢
¢
¡
⁄
¤
¡
)
∞
Use to store radio stations in the preset
memory and to start the Auto Memory.
¡ SETUP key
¡
8
&
¡
Use to select the speakers' settings etc.
™
keys
&
£
Use for selection adjustments during sound,
setup and preset channel functions.
£ MULTI CONTROL knob
Use to control a variety of settings.
¢ LISTEN MODE knob
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
§ AV AUX key
Use to switch the input to AV AUX.
Use to adjust the brightness of the display.
⁄
›
)
¡
&
@ VOLUME CONTROL knob
# MUTE key
Use to temporarily mute the sound.
$ PHONES jack
Use for headphone listening.
% Input Selector keys
DVD/6CH, CD/DVD, PHONO , TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
Use to select input sources.
^ SOUND key
Use to adjust the sound quality and the
™
⁄
™
)
¡
%
%
¤
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
⁄
ambience effects.
Standby mode
Connection at POWER ON/OFF key
While the standby indicator is lit, a small amount of power is supplied to
thesystemtobackupthememory. Thisiscalledstandbymode. Underthe
condition, the system can be turned ON by remote control unit.
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit
This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes.
‡
*
DVD
6CH
TUNER
VID3
CD
VID1
1
DVD
AV AUX
MD
TAPE
VID2
(
PHONO
TV
POWER
RCVR
)
¡
P
o
V P
w
ow
C
e
r
R
e
T
S
2
3
4
5
3
6
Multi
Enter
2
7
™
£
Multi
1
8
0
9
+
10
+ 100
RDS Disp.
Page
PTY
TV Mute
¢
4
5
6
Return
Exit
OSD
Last
/A/B
Guide
Disc Skip
Menu
∞
Disc Sel.
Mute
Input Sel.
§
¶
¢
Tone-
+
+
VOL
7
8
9
CH
Sound
•
ª
4
–
–
Bass
Boost
TV
VOL
TV Input
Band
–
+
Tune
–
Tune
+
0
!
@
º
⁄
¤
‹
Dimmer
Auto
Top Menu
Setup
Info/Flip
Input
Mode
Loudness
#
$
If the name of a function is different on
Active
EQ
Remote
Setup
the receiver and on the remote control,
the name of the remote control key in
thismanualisindicatedinparentheses.
Listen Mode
DSP
Speaker
EQ
Stereo
Mode
%
^
&
›
fi
£ Page ∞/5 key
1 Source keys (MD/TAPE, CD/DVD, DVD/
9 TV VOL +/– keys
Use to adjust the TV’s volume.
0 1 /¡ keys
If CD, MD or Tape is selected as the input
source, this key functions as search keys.
Tune – / + keys
Use to operate the tuner mode.
! 8key
Use to operate other components.
Dimmer key
Use to adjust the brightness of the display.
@ 3/8key
If CD is selected as the input source, this key
functions as the play/pause key.
IfMDorTAPEkeyisselectedasinputsource,
this key functions as the play key.
Band key
Use to select the broadcast band.
# 2key
Use to operate other components.
6CH, TUNER,VID1, VID2, VID3, AV AUX,
RDS Disp. key
§
PHONO)
fi
Use to receive RDS broadcast.
PTY key
When press and hold for more than 3 seconds,
theyareusedtoselecttheregisteredcomponents.
Input Selector keys (MD/TAPE, CD/DVD,
DVD/6CH, TUNER, VID1, VID2, VID3, AV
¶
Use for PTY search.
¢ OSD (on screen display) key
Use to operate the DVD component.
Guide key
AUX, PHONO)
)
When press and release in less than 3 seconds,
they are used to select the input sources .
2 SRC ( source) Power key
Use to operate other components.
∞ Menu key
Use to operate other components.
§ Mute key
Use to temporarily mute the sound.
¶ Tone key
Use to switch the status of TONE control.
Sound key
Use to adjust the sound quality and the
ambience effects.
• VOL +/– keys
Use to adjust the receiver volume.
ª Bass Boost key
Use to select the maximum adjustment
setting for the low frequency range.
º ÷ key
If MD or Tape is selected, this key functions
as record key.
If VCR is selected, this key functions as
recordkeywhenitpressedtwicesequentially.
Top Menu key
Use to operate the DVD component.
Setup key
›
Use to turn the other source components on or off.
¡
¡
3 Numeric keys
∞
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
¤
Multi (multi control) %/fi keys
Use to control a variety of settings.
Use to operate other components.
P.Call @/# keys
&
¢
)
∞
If Tape is selected, this key functions as
reverse play key.
Use for selection adjustments during sound,
set up and preset channel functions.
Enter key
Use to operate other components.
4 Return key
Use to operate the DVD component.
Exit key
Use to operate other components.
5 Disc Skip key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
Last/A/B key
If TAPE is selected as the input source, this is
A and B deck of a double cassette deck.
Use to operate other components.
6 Disc Sel. key
Use to operate other components.
Input Sel. key
Use to operate other components.
7 CH +/– keys
¡
Info/Flip key
Use to operate other components.
$ Input Mode key
8
Use to switch between the full auto, digital
and analog inputs.
% Listen Mode 5/∞ keys
Use to select the listening mode.
^ DSP Mode key
Use to select any of the DSP mode.
& Active EQ key
⁄
⁄
¡
&
Use to select ACTIVE EQ’s setting.
Use to select the speakers’ settings etc.
⁄ Loudness key
Use to switch the status of LOUDNESS.
¤ Remote Setup key
Use to register other components.
‹ 7 key
* LED (lighting-emitting diode) indicator
Blinks to show that signals are being
transmitted.
¡
( TV key
Use to select the TV equipment.
) POWER RCVR ( receiver) key
Use to turn the receiver on or off.
¡ TV Power key
Use to turn the TV on or off.
™ +100 key
Use to select the disc number with the
multi-CD player.
TV Mute key
&
If CD, MD, or TAPE is selected as the input
source, this key functions as the stop key.
Auto key
¢
Use to select the channels.
¢ / 4 keys
Use to select the auto or manual tuning mode.
› Speaker EQ key
¡
If CD, MD and DVD is selected as the input
source, these keys function as skip keys.
8 TV Input key
Use to select SPEAKER EQ’s setting.
fi Stereo key
¤
Use to switch the listen mode to STEREO.
Use when in TV operation.
Use to temporarily mute the TV sound.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Make connections as shown in the following pages.
When connecting the related system components, be sure
to refer to the instruction manuals supplied with the
components you are connecting.
Do not connect the power cord to a wall outlet until all
connections are completed.
Input mode settings
CD/DVD, VIDEO 2 and DVD/6CH inputs each include jacks for digital
audio input and analog audio input.
The initial factory settings for audio signal playback for CD/DVD,
DVD/6CH and VIDEO 2.
After completing connections and turning on the receiver, follow the
steps below.
Notes
1. Be sure to insert all connection cords securely. If their connections
are imperfect, sound may not be produced or there will be noise infer-
ence.
INPUT MODE
2. Be sure to remove the power cord from the AC outlet before plugging
or unplugging any connection cords. Plugging/unplugging connection
cords without disconnecting the power cord can cause malfunctions
and may damage the unit.
3. Do not connect power cords from components whose power
consumption is larger than what is indicated on the AC outlet at the
rear of this unit.
LISTEN MODE
Input Selector
Analog connections
1 Use the Input Selector keys to select CD/DVD, VIDEO 2 or
DVD/6CH.
Audio connections are made using RCA pin cords. These cables transfer
stereo audio signal in an “analog” form. This means the audio signal
corresponds to the actual audio of two channels. These cables usually
have 2 plugs on each end, one red for the right channel and one white for
the left channel. These cables are usually packed together with the
source unit, or are available at your local electronics retailer.
2 Press the INPUT MODE key.
Each press switches the setting as follows:
In DTS play mode
1 FULL AUTO (digital input, analog input)
2 DIGITAL MANUAL (digital input)
Microcomputer malfunction
If operation is not possible or an erroneous display appears, even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
In CD/DVD, VIDEO 2 or DVD/6CH play mode
1 FULL AUTO (digital input, analog input)
2 DIGITAL MANUAL (digital input)
3 6CH INPUT (DVD/6CH input)
t
CAUTION
4 ANALOG (analog input)
Be sure to adhere to the following, or proper ventilation will be
blocked causing damage or fire hazard.
• Do not place any objects impairing heat radiation onto the top of the
Digital input:
Select this setting to play digital signals from a DVD, CD, or LD
player.
unit.
• Leave some space around the unit (from the largest outside dimen-
sion including projection) equal to or greater than, shown below.
Analog input:
Top panel : 50 cm
Side panel : 10 cm Back panel : 10 cm
Select this setting to play analog signals from a cassette deck, VCR,
or record player.
Auto detect:
In “FULL AUTO” mode (AUTO DETECT indicator light up), the
receiver detects the digital or analog input signals automatically.
Priority is given to digital signal during input mode selection. The
receiver will select the input mode and listening mode automatically
during playback to match the type of input signal (Dolby Digital,
PCM, DTS) and the speaker setting. The OPTICAL and COAXIAL
indicator on the display will light up when digital signal is detected.
If the input signal is analog, the ANALOG indicator will light up.
To keep the receiver set to the currently selected listening mode,
use the INPUT MODE key to select “DIGITAL MANUAL” (manual
sound). However, even when this setting is selected, there may be
cases in which the listening mode is selected automatically to
match a Dolby Digital source signal depending on the combination
of listening mode and source signal.
At DIGITAL MANUAL, if the audio reproduction stops in the
middle due to change in the input signals, etc. press the LISTEN
MODE knob.
If the INPUT MODE key is pressed quickly, sound may not be
produced. Press the INPUT MODE key again.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the terminals
Speaker placement
1 Strip coating.
2 Loosen.
Center speaker
Subwoofer
3 Insert.
4 Secure.
Front speakers
(L,R)
Listening
position
Surround
speakers
(L,R)
Surround
back speaker
1 Strip coating.
2 Push the lever.
Front (left and right) speakers
Placeatthefrontleftandrightofthelisteningposition. Frontspeakers
are required for all surround modes.
Center speaker
Place front and center. This speaker stabilizes the sound image and
helps recreate sound motion. Required for surround playback.
Surround (left and right) speakers
3 Insert the cord.
4 Return the lever.
Place at the direct left and right, or slightly behind, the listening
position at even heights, approximately 1 meter above the ears of the
listeners. These speakers recreate sound motion and atmosphere.
Required for surround playback.
Subwoofer
Reproduces powerful deep bass sounds.
Surround back speaker
Place the speaker directly at the rear of the listening position. The
optimum position depends mainly on the room condition.
• Never short circuit the + and – speaker cords.
•If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be
unnaturalwithambiguousacousticimaging. Besuretoconnectthe
speakers correctly.
• Although the ideal surround system consists of all the speakers
listed above, if you don't have a center speaker or a subwoofer, you
can divide those signals between the available speakers in the
speaker settings steps to obtain the best possible surround
Speaker impedance
reproduction from the speakers you have available.
&
Afterconfirmingthespeakerimpedanceindicationsprintedonthe
rear panel of the receiver, connect speakers with matching
impedance ratings. Using speakers with a rated impedance other
than that indicated on the rear panel of the receiver could result in
malfunctions or damage to the speakers or receiver.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting audio components
Shape of AC outlets
UK
Europe
SYSTEM CONTROL
jacks
^
To AC wall outlet
IN
IN
REC OUT
PLAY IN
L
R
GND
PHONO
CD/DVD
MD/TAPE
Cassette deck or
MD recorder
OUT
IN
OUT
OUT
CD or DVD player
Moving coil (MC) cartridge
record player cannot be used
directly from the receiver unit. It
can only be used when another
equalizer amplifier is connected.
Record player
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components
About the S VIDEO
jacks
S Video jacks
S VIDEO
S VIDEO
Use the S VIDEO jacks to
make connections to
video components with
S VIDEO IN/OUT jacks.
S VIDEO
IN
VIDEO
IN
DVD
IN
MONITOR
OUT
VIDEO
If you use the S VIDEO
•
jackstoconnectyourvideo
playback components, be
sure to use the S VIDEO
jacks when connecting
your monitor and video
recording components.
REC OUT
PLAY IN
PLAY IN
PLAY IN
VIDEO
OUT
VIDEO
IN
IN
VIDEO
VIDEO
IN
DVD
IN
MONITOR
OUT
VIDEO
VIDEO 1
VIDEO 2
VIDEO 3
Monitor TV
VIDEO
IN
Video inputs
Video
IN/OUT
Audio
IN/OUT
(Yellow RCA pin cords)
Video deck
OUT
IN
IN
OUT
Video inputs and outputs
(Yellow RCA pin cords)
Audio inputs
and outputs
DVD player or LD player
OUT
OUT
OUT
OUT
DVD player or LD player
A video component with digital audio outputs should be connected to the VIDEO 2 jacks.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
OPTICAL
CD/DVD
VIDEO
2
DVD/
6CH
DIGITAL IN
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
CD or DVD player
COAXIAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
COAXIAL
DIGITAL
OUT
(AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video components”.)
!
RF digital demodulator
(DEM-9991D)
(sold separately)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See “Connecting video components”.)
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting a DVD player (6-channel input)
If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
OPTICAL
CD/DVD
VIDEO
OUT
VIDEO
IN
IN
VIDEO
VIDEO
IN
DVD
IN
MONITOR
OUT
VIDEO
2
VIDEO
DVD/
6CH
DIGITAL IN
S VIDEO
S VIDEO
IN
VIDEO
VIDEO
IN
DVD
IN
MONITOR
OUT
VIDEO
PLAY IN
PLAY IN
CENTER
FRONT
SURROUND SUB WOOFER
VIDEO 2
VIDEO 3
DVD/6CH INPUT
VIDEO OUT
(Yellow RCA
pin cord)
COAXIAL
DIGITAL OUT
(AUDIO)
FRONT
OUT L/R
SURROUND
OUT L/R
CENTER
OUT
DVD player
SUBWOOFER
OUT
S VIDEO
OUT
S VIDEO cord
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speakers
Front Speakers A
Right Left
Powered
subwoofer
Center
Speaker
SPEAKERS (6-16
)
FRONT A
CENTER
GREEN
RED
WHITE
R
+
-
R
L
R
R
SUB WOOFER
SURROUND
R
GRAY
BLUE
L
SURROUND BACK
PRE OUT
+
- -
+
+
- -
+
R
L
FRONT B
Surround
Back
Power amplifier
Right
Left
Surround Speakers B
(Be sure to connect both
surround speakers)
Use the FRONT SPEAKERS B
terminals if you want to connect
a second front speaker system.
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting to the AV AUX jacks
Connecting the antennas
The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AV AUX
AM antenna terminal connections
1 Push lever.
2 Insert cord.
3 Release lever.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
S VIDEO
VIDEO
L-AUDIO-R
FM antenna terminal connections
Insert cord.
S VIDEO cord
FM outdoor antenna
Leadthe75Ω coaxialcableconnectedtotheFMoutdoorantennaintothe
room and connect it to the FM 75Ω terminal.
VIDEO OUT
Attach to the stand
ANTENNA
Camcorder, other
VCR, video game or
portable MD player
S VIDEO OUT
AUDIO OUT
AM
AM loop antenna
GND
FM indoor antenna
75
FM
FM outdoor antenna
Use an antenna
adaptor
(Commercially
available)
• To select the source connected to the AV AUX jacks press AV
AUX key.
)
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the system control
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote supplied with the
receiver.
This unit is compatible only with the [SL-16] mode. The system
control operation is not available if the unit is connected in the
[XS8], [XS], or [XR] connection mode.
Automatic Operation
When you start playback from a source component, the input selector
on this unit switches to that component automatically.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
Synchronized Recording
Lets you synchronize recording with the start of playback when
recording from CD, MD or analog discs.
SYSTEM CONTROL
SYSTEM CONTROL
cord
Registering setup codes for KENWOOD audio components
If you own remote controllable KENWOOD audio components that
are not compatible with system control, registering the setup code
enables you to control those components using the remote control
supplied with this unit (without connecting system control cords). To
register setup codes for your remote controllable KENWOOD audio
components, see “Registering setup codes for other components”.
fi
• You may connect the system control cord to either the up or down
jack.
EXAMPLE: [SL16] mode connections
The underlined portion represents the setting of the system control
mode.
[SL16]
Receiver
SYSTEM
CONTROL
cord
Cassette deck
or MD recorder
[SL16] [XS] [XS8] [XR]
[SL16] [XS] [XS8]
[XS]
CD player
Record player
• In order to take advantage of the system control operations, the
components must be connected to the correct jacks. To use a CD
player it must be connected to the CD jacks. To use a cassette deck
(or MD recorder) it must be connected to the MD/TAPE jacks. When
using more than one CD player (etc.) only the one connected to the
specified jacks may be connected for system control.
• Some CD players and cassette decks are not compatible with the
[SL16] system control mode. Do not make system connections with
equipment that is not [SL16] compatible.
• Some MD players are not system control compatible. You cannot
make system control connections to this kind of equipment.
Notes
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]
equipment for system operations. If your equipment consists of
this kind of combination, please do not connect any system con-
trol cords. Even without system control cords, normal operations
can be carried out without effecting performance.
2. Do not connect system control cords to any components other
than those specified by KENWOOD. It may cause a malfunction
and damage your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
Speaker settings
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, and surround speakers) as described below.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate subwoofer setting.
1 SUBW ON : Subwoofer setting mode to the receiver is
ON.
ON/STANDBY
SETUP MULTI CONTROL
2 SUBW OFF : Subwoofer setting mode to the receiver is
OFF.
• The initial setting is “SUBW ON”.
• When the setting “SUBW OFF” is selected, the front speakers
are automatically set to “FRNT LARGE” and the procedure skips
to step 6.
Before step 6, press the SETUP key to accept the setting.
• When subwoofer output sound is required, select “FRNT
NORMAL”,orselectboth“FRNTLARGE”and“SWRE-MIXON”.
POWER ON/OFF
TUNER
3 Press the ∧ key or #key to accept the setting.
• The front speakers setting indication “FRNT” appears.
POWER RCVR
(Multi %/fi,
@/#)
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Setup
4 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate front speakers setting.
1 FRNT LARGE
:
:
Large front speakers are connected
to the receiver.
Average size front speakers are
connected to the receiver.
1Turn on the power to this receiver by pressing the POWER
ON/OFF and ON/STANDBY key or POWER RCVR key.
2 FRNT NORMAL
• For “FRNT LARGE” selection, no sound will be heard from
subwoofer speaker even when it is set to on. However, if you
select “SW RE-MIX ON” when subwoofer is selected, you will
be able to hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front
speaker.
For the remote control, press and hold the TUNER key for
2more than 3 seconds to switch to receiver mode.
3Press the SETUP key to enter the SETUP mode and press
∧ / ∨ keys or @/ #keys for the following displays.
1 SP SETUP
2 TEST TONE
3 SP DISTANCE
4 DISP MODE
5 EXIT
5 Press the ∧ key or #key to accept the setting.
• The center speaker setting indication “CNTR” appears.
6 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate center speaker setting.
The flow of the SET UP is as follows:
If you selected “LARGE” as the front speakers setting,
1 CNTR LARGE
2 CNTR NORMAL
3 CNTR OFF
:
:
:
A large center speaker is connected
to the receiver.
An average size center speaker is
connected to the receiver.
Center speaker setting mode to the
receiver is OFF.
SP SETUP
Subwoofer
Front
TEST TONE
SP DISTANCE
Front Left
DISP MODE
Display Selector
Display Listen
EXIT
T. TONE T. TONE
AUTO MANUAL
Center
L
C
L
C
R
Center
Front Right
Surround
Surround Right
Surround Back
Surround Left
Subwoofer
SR
SB
SL
SW
Surround
Back
R
If you selected “NORMAL” as the front speakers setting,
SR
SB
SL
SW
1 CNTR ON
2 CNTR OFF
:
:
Centerspeakersettingmodetothereceiver
is ON.
Centerspeakersettingmodetothereceiver
is OFF.
Surround
Mix
Subwoofer
Re-mix
7 Press the ∧ key or #key again to accept the setting.
• The surround speaker indication “SURR” appears.
4Select a speaker system.
1 Select the SP SETUP and press the SETUP key again so that
the subwoofer setting indication “SUBW ON” appears.
8 Use the MULTI CONTROL knob or Multi (%/fi) to select the
appropriate surround speaker setting.
If you selected “LARGE” as the center speaker setting,
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
1 SURR LARGE
:
Large surround speakers are
connected to the receiver.
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
2 SURR NORMAL : Average size surround speakers are
SL
S
SB
SR
connected to the receiver.
Surround speaker setting mode to
the receiver is OFF.
3 SURR OFF
:
Continued to next page
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
If you selected other than “LARGE” as the center speaker setting,
% Press the SETUP key again to return to the main setup
displays.
• The receiver enters the speaker volume level adjustment mode.
• In steps 4 and 5, indications appear only for the selected
channels of the speakers that require adjusting.
1 SURR ON
2 SURR OFF
:
:
Surround speaker setting mode to the
receiver is ON.
Surround speaker setting mode to the
receiver is OFF.
5Adjust the speaker volume level.
From your usual listening position, adjust the volume levels. The
volume levels from each speaker should be the same.
• When the setting “SURR OFF” is selected, the procedure skips
to step #.
9 Press the ∧ key or #keys again to accept the setting.
• The surround speaker setting indication “SB” appears.
1 Press the ∧/∨ keys or @/#keys to select TEST TONE.
2 Press the SETUP key for the following displays:
0 Use the MULTI CONTROL knob or Multi (%/fi) keys to
select appropriate surround back speaker setting.
1 T.TONE AUTO
2 T.TONE MANUAL
If you selected “LARGE” as the surround speaker setting,
3 The selection of AUTO/MANUAL TEST TONE is done by the
MULTI CONTROL knob or Multi (%/fi) keys.
Press the SETUP key again to begin TEST TONE.
1 SB NORMAL : Average size surround back speaker is
connected to the receiver.
2 SB LARGE
3 SB OFF
:
:
Large surround back speaker is
connected to the receiver.
Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the volume level of the test tone output from the speaker
channel to be adjusted.
Surround back speaker setting mode to
the receiver is OFF.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ForAUTOselection,thefirsttesttoneisheardfromthefrontleft
speaker for 2.5 seconds. The next test tone is heard from the
speakers in the following sequence for 2 seconds each.
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
LEFT
SUBW
CNTR
RIGHT
SR
SL
SB
If you selected “NORMAL” as the surround speaker setting,
The channel indication blinks while the test tone is being output.
1 SB ON
:
Surround back speaker setting mode to the
receiver is ON.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
2 SB OFF : Surround back speaker setting mode to the
AUTO
MEMO
LFE
receiver is OFF.
STEREO
TUNED
SL
S
SB
SR
! Press the ∧ key or # key again to accept the setting and
“SURR:MIX” appears.
• Surr:mix is when the SL and SR speakers signals are mixed to
produce sound from the surround back speaker which would
enable the listener to enjoy sound coming from the back.
• If you change the volume level settings for the speakers while
listening to music, the settings referred to on this page are also
changed.
¤
• IfthespeakersettingselectsareOFF, thespeakerlevelsettings
are reset.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
For MANUAL selection, press the ∧/∨ keys or @/#keys each
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
time to select the speaker channel.
STEREO
TUNED
SL
S
SB
SR
4 Press the SETUP key again.
• The test tone is turned off and return to the main setup displays.
@ Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the following.
Input the distance to the speakers.
6
1 SURR:MIX ON
:
Surround mix setting mode to the
receiver is ON.
1 Press the ∧/∨ keys or @/#keys to select the SP DISTANCE
on setup displays and press the SETUP key again.
2 SURR:MIX OFF : Surround mix setting mode to the
receiver is OFF.
2 Measure the distance from the listening position to each of
the speakers.
• If surround back speaker is turned off, SURR:MIX setting is not
visible and the procedure skips to step #.
Jot down the distance to each of the speakers.
Distance to Front left speaker (L) : ____ feet (meters)
Distance to Center speaker (C)
Distance to Front right speaker (R) : ____ feet (meters)
: ____ feet (meters)
# Press the ∧ key or #key again to accept the setting.
• The subwoofer remix setting indication “SW RE-MIX” appears.
Distance to Surround right (SR)
Distance to Surround back (SB)
Distance to Surround left (SL)
Distance to Subwoofer (SW)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
$ Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate subwoofer re-mix setting.
1 SW RE-MIX ON : Subwoofer re-mix setting mode to
the receiver is ON.
2 SW RE-MIX OFF : Subwoofer re-mix setting mode to
the receiver is OFF.
• If subwoofer is turned off, subwoofer re-mix setting is not visible.
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
3 Use the ∧/∨ keys or @/# keys to select the speakers and the
MULTI CONTROL knob or Multi (%/fi) keys to adjust the
distance to the front speakers.
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
The speaker indicator to be adjusted blinks.
CINE
ACT
DSP
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
SW
R
LFE
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
SL
S
SB
SR
AUTO
MEMO
STEREO
TUNED
SL
S
SB
SR
1 Use the Input Selector keys to select the source of which the
input level you want to adjust.
Indication in feet
Indication in meters
• You can store a separate input level for each input source.
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
2 Press the SOUND and ∧/∨ keys or @/# keys repeatedly until
the “INPUT” indication appears.
4 Repeatsteps 3 toinputthedistanceforeachofthespeakers.
3
Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
input level.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
7Select the display mode.
1 Press the ∧/∨ key or @/# keys to select the DISP MODE.
2 Press the SETUP key for the following displays:
• The adjustment mode is displayed for approximately 8 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
1 DISP SELECTOR
2 DISP LISTEN
:
:
Displays the current input selector.
Displays the current listen mode.
4 Press the SOUND key again to return to the input indication.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the display mode.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
4 Press the SETUP key again to accept the setting.
5 Use the ∧ key or # key to select EXIT.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
6 Press the SETUP key to exit the SET UP mode.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Listening to a source component
Preparing for playback
Some preparatory steps are needed before starting playback.
VOLUME CONTROL
ON/STANDBY
A SPEAKERS B
INPUT MODE
Input Selector
AV AUX
POWER ON/OFF
MD/TAPE
Input Selector
Turning on the receiver
1 Turn on the power to the related components.
VOL
/
2 Turn on the power to this receiver by pressing the POWER
ON/OFF and ON/STANDBY
key.
Selecting the input mode
If you have selected a component connected to the CD/DVD, VIDEO 2
or DVD/6CH jacks, make sure that the input mode setting is correct for
Use the Input Selector and AV AUX keys to select the
1source you want to listen to.
the type of audio signal to be used.
8
Selecting a source using each key.
Selecting MD/TAPE
1 “DVD/6CH”
2 “CD/DVD”
3 “PHONO”
4 “TUNER”
5 “VIDEO 1
6 “VIDEO 2
7 “VIDEO 3
8 “MD/TAPE”
9 “AV AUX”
Select the source name corresponding to the component connected
to the MD/TAPE jacks. The initial factory setting is “TAPE”. To
change the source to “MD”, follow the steps below:
Hold down the MD/TAPE key for more than 2 seconds.
• The source indication changes to “MD”.
• To return to the original indication, repeat the above procedure.
Selecting the speaker system
2Start playback from the selected source.
Press the A SPEAKERS B key to select the speaker system to be
used.
Use the VOLUME CONTROL knob or VOL +/ keys to adjust
–
3the volume.
A ON
B ON
:
:
Sound from the speakers connected to the SPEAKERS A
terminals on the rear panel.
Sound from the speakers connected to the SPEAKERS B
terminals on the rear panel. No sound will be heard from
the subwoofer.
A+B ON : Sound from both the speakers connected to the
SPEAKERS A and B terminals on the rear panel.
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones for stereo sound in all playback
modes. The display segments are different depending on
the type of input signal.
The indicator for the speakers
you want to use should be lit.
SP
MUTE OPTICAL 6CH INPUT
AUTO DET
A
B
CLIP
COAXIAL
ANALOG 96kHz
L
C
SW
R
LFE
SL
S
SB
SR
• Selecting “6CH INPUT” by pressing the INPUT MODE key, whereby
“DVD/6CH” is the input source will cause SPEAKERS A to be selected
automatically.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Adjusting the sound
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes.
SPEAKER EQ ACTIVE EQ
A SPEAKERS B
TONE MULTI CONTROL
Press the Bass Boost key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
Switching back to the previous setting
Press the Bass Boost key again.
MUTE VOLUME
CONTROL
PHONES LOUDNESS
TUNER
Adjusting the LOUDNESS mode
POWER RCVR
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
(Multi %/fi)
Mute
Press the LOUDNESS key to turn the LOUDNESS setting ON.
Tone
VOL
Bass Boost
/
To cancel
Press the LOUDNESS key again so that the “LOUDNESS”
indicator goes off.
Loudness
Speaker EQ
Active EQ
Muting the sound
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
Adjusting the TONE
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
SW
R
LFE
1 For the remote control, press and hold the TUNER key for more
than 3 seconds to switch to receiver mode.
SL
S
SB
SR
Blinks
2 Press the TONE key to select the TONE mode.
To cancel
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
TONE ON/OFF.
Press the MUTE key again so that the “MUTE” indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing VOL +/– keys.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
ACTIVE EQ mode
4 WheninTONEONselection, presstheTONEkeyforthefollowing
displays.
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
BASS
:
Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
Press the ACTIVE EQ key for the following selections;
1 ACTIVE EQ MUSIC : Effective when listening to music.
(The ACTIVE EQ indicator lights up.)
5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
sound quality.
2 ACTIVE EQ CINEMA : Effective when watching a movie.
(The ACTIVE EQ indicator lights up.)
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
3 ACTIVE EQ TV
: Effective when watching TV.
STEREO
TUNED
(The ACTIVE EQ indicator lights up.)
: The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ indicator goes off.)
SL
S
SB
SR
4 ACTIVE EQ OFF
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
• “ACTIVE EQ” will scroll from right to left.
• When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ
(MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON
automatically.
• ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON, and during 96kHz LPCM
playback.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
SPEAKER EQ mode
Listening with headphones
1
Press the A and B Speaker keys so that the speaker indicator
goes off.
SPEAKER EQ function is to adjust the receiver’s audio output
characteristicswiththespeakers’characteristicswhichdiffersdepending
on the size of the speakers. Especially for the music sound source
playback, the reproduced sound becomes more natural when adjusting
the output characteristics. When activating the SPEAKER EQ function,
you will be able to enjoy a more natural and dynamic sound experience
even with small size speakers.
Make sure the SPEAKERS
indicators are turned off.
CINEMA EQ. DTS. DOLBY
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LO
SP
MUTE OPTICAL 6CH INPUT
A
B
CLIP
COAXIAL
ANALOG
LFE
Press the SPEAKER EQ key to switch the following setting;
SL
S
SB
SR
1 SPEAKER EQ SMALL : To select a small size speaker.
(TheSPEAKEREQindicatorlightsup.)
2 SPEAKER EQ NORMAL : To select an average size speaker.
(TheSPEAKEREQindicatorlightsup.)
• Ifyouturnoffallofthespeakerswheninsurroundmode,thesurround
mode will be cancelled as well, resulting in stereo playback.
3 SPEAKER EQ LARGE
: To select a large size speaker.
(TheSPEAKEREQindicatorlightsup.)
: The SPEAKER EQ function is turned
OFF.
2 Connect headphones to the PHONES jack.
PHONES
4 SPEAKER EQ OFF
(TheSPEAKEREQindicatorgoesoff.)
• “SPEAKER EQ” will scroll from right to left.
• SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned
ON.
• SPEAKEREQfunctionwillnotbeavailablewhenRECMODE, AUTO
TUNING or PRESET MEMORY is ON, and during 96kHz LPCM
playback.
3 Use the VOLUME CONTROL knob or VOL +/ keys to adjust
the volume.
–
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording audio (analog sources)
3 Press and hold the DIMMER key for more than 2 seconds to select
the AUTO REC or MANUAL REC mode.
1 REC MODE off
:
:
The digital input record mode is
switched off.
The digital input signals (DTS, Dolby
Digital, or PCM) are identified
automatically and converted into stereo
signals that are ready for recording.
2 AUTO REC mode
3 MANUAL REC mode : The input signal type at the moment
this mode is selected is held
MD/TAPE
throughout this mode.
Recording a music source
For AUTO REC mode :
1 Use the Input Selector keys to select the source (other than “MD/
TAPE”) you want to record.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.
STEREO
TUNED
SL
S
SB
SR
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
Recording video
1 Use the Input selector keys to select the video source (other than
“VIDEO 1”) you want to record.
LFE
STEREO
TUNED
SL
S
SB
SR
2 Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
For MANUAL REC mode :
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
to the copy guard condition.
t
STEREO
TUNED
SL
S
SB
SR
Recording audio (digital sources)
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
Switch on the REC MODE to record a digital input source.
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
Usually use the AUTO REC MODE to record audio input sources. When
the digital mode changes during recording in the AUTO REC MODE, the
audio input source may be interrupted momentarily.
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Recording music in AUTO REC or MANUAL REC mode
4 Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
DIMMER
Input Selector
1 Use the Input Selector keys to select the source (CD/DVD,
DVD/6CH, VIDEO 2) you want to record.
2 Set the MD or TAPE recorder to record.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.
Radio stations can be classified into RDS (Radio Data System) stations
and other stations. To listen to or store RDS stations in the preset
memory see “Using RDS (Radio Data System)”.
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in the form of digital
data) for FM broadcasts along with the broadcast signal. Tuners and
receivers designed for RDS reception can extract the information from
the broadcast signal for use with various functions, such as automatic
display of the station name.
Tuning radio stations
RDS functions:
PTY (Program TYpe Identification) Search
Automatically tunes to a station that is currently broadcasting the
specified program type (genre).
¶
MULTI CONTROL
BAND
PS (Program Service Name) Display
Automatically displays the station name transmitted by the RDS
station.
RDS AUTO MEMORY function
§
Automatically selects and stores up to 40 RDS stations in the preset
memory.
TUNER AUTO
If fewer than 40 RDS stations have been stored in the preset memory,
regular FM stations will be stored in the remaining places.
Radio Text function
Displays the radio text data transmitted by some RDS stations when
you press the RDS DISP (display) key. There is “NO RT” if no text
data is transmitted.
TUNER
(Multi %/fi)
The “RDS” indicator lights up when an RDS broadcast (signal) is
received.
Band
Auto
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
Tune – 1
Tune+ ¡
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Note
Some functions and function names may differ for certain countries
and areas.
Use the TUNER key to select the tuner.
1
2Use the BAND key to select the desired broadcast band.
Each press switches the band.
Before using a function utilizing the RDS, be sure to perform the RDS
Auto Memory operation by referring to the description in “Presetting
RDS stations (RDS AUTO MEMORY)”.
§
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
3Use the AUTO key to select the desired tuning method.
Each press switches the tuning method to either auto or manual
tuning.
“AUTO” indicator lights up in the display.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
CAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
XIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
STEREO
TUNED
• Normally, set to “AUTO” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
Use the MULTI CONTROL knob or Multi (%/ fi) keys, or
Tune – 1/+ ¡keys to select the station.
4
“STEREO” lights when a broadcast is being received in stereo.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
TICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
AXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
MEMO
STEREO
TUNED
“TUNED” is displayed when a station is received.
Auto tuning
: The next station is tuned automatically.
Manual tuning : Turn the knob or use the Multi (%/fi) keys to
select the desired station.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Presetting radio stations manually
The RDS auto memory function assigns preset numbers to RDS stations
starting from preset number “1”. Therefore, be sure to execute the RDS
auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations. See
Enter the number of the preset station you want to receive
2(up to “40”).
Press the numeric keys in the following order:
For “15”, press
For “20”, press
0,5
0,0,)
“Presetting RDS stations (RDS AUTO MEMORY)”.
§
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
MULTI CONTROL
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Receiving preset stations in order (P.CALL)
TUNER MEMORY
1Tune to the station you want to store.
TUNER
2Press the MEMORY key while receiving the station.
(P.Call @/#)
Blinks for 5 seconds
Lights for 5 seconds
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMORY
STEREO
TUNED
LFE
SL
S
SB
SR
Proceed to step 3within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
1Press the TUNER key to select the tuner as the source.
2Use the P.Call @/ #keys to select the desired station.
Use the MULTI CONTROL knob or Multi (%/ fi) keys to
select one of the station presets (1 – 40).
3
• Each time you press the key, another preset station is received in
order.
4Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
Pressing the P.Call # does the following:
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Pressing the P.Call @ does the following:
Receiving preset stations
Holding down the # or @ keys, lets you skip through the
TUNER
presets, receiving each preset station at 0.5 second intervals.
Numeric keys
1Press the TUNER key to select tuner as the source.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Using the RDS DISP (Display) key
Presetting RDS stations (RDS AUTO MEMORY)
This function automatically stores up to 40 RDS stations in the preset
memory. In order to use the PTY function, the RDS stations must be
stored in the preset memory using the RDS AUTO MEMORY function.
TUNER
TUNER
MULTI CONTROL
RDS Disp.
BAND
MEMORY
1Press the TUNER key to enter tuner mode.
Pressing the RDS Disp. key changes the contents of the
display.
Use the BAND key to set the broadcast band to “FM”.
2
3
Each press switches the display mode as follows :
Press the MEMORY key continuously for more than 3
seconds will start AUTO MEMORY.
1 PS (Program Service name) display
2 RT (Radio Text) display
3 Frequency display
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
1 PS (Program Service name) display :
The station name is displayed automatically when an RDS broadcast
is received.
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
If no PS data was sent, “NO PS” is displayed.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
• After a few minutes, up to 40 RDS stations are preset in order from
channel “01”.
STEREO
TUNED
SL
S
SB
SR
• Stations already stored in the preset memory may be replaced by
RDS stations. (i.e., If the RDS AUTO MEMORY function detects 15
RDS stations, the stations currently preset at numbers 01~15 will
be replaced by the RDS stations.)
2 RT (Radio Text) display :
TextdataaccompanyingtheRDSbroadcastscrollsacrossthedisplay.
“NO RT” is displayed if the current RDS station does not provide RT
data.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
3 Frequency display :
Displays the frequency of the current station.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Tuning by Program TYpe (PTY search)
This function lets you set the tuner to automatically search for stations
which are currently broadcasting the type of program (genre) you want
to listen to.
Press the PTY key to start searching.
3
EXAMPLE : Searching for a Pop Music broadcast.
Under certain receiving conditions, it may take more than 1
minute to complete the search.
Display while searching.
Blinks
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
RDS
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
MATRIX
RPTY
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Program type name display
Display when a station is received.
Goes out
(Multi %/fi)
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
RDS
THX
Surround EX
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
MATRIX
PTY
RTY
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Tune – 1
Tune+ ¡
Station name display
• No sound is heard while “PTY” is blinking.
• If the desired program type cannot be found, “NO PROGRAM” is
displayed, then after several seconds the display returns to the
original display.
Preparations
• Execute the RDS auto memory procedure.
• Set the broadcast band to FM.
• Tune to an RDS station.
To select another program type.
Repeat steps 1, 2and 3.
1Press the PTY key to activate the PTY search mode.
Light up
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RPTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
When an RDS broadcast is received, the program type is shown on
the display. If no PTY data is available, or if the station is not an RDS
station, “NONE” is displayed.
While the “PTY” indicator is lit, use the Multi (%/fi) keys or
Tune – 1 /+ ¡ keys select the program type of your
choice.
2
Program type table
Program Type Name Display
Program Type Name Display
Pop Music
POP M
Weather
WEATHER
Rock Music
Easy Music
Light Classical Music
Serious Classical Music CLASSICS
Other Music
News
ROCK M
EASY M
LIGHT M
Finance
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
Children’s Program
Social Affairs
Religion
Phone In
Travel
OTHER M
NEWS
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied Speech
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
Leisure
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
FOLK M
DOCUMENT
“NO PROGRAM” is displayed if this operation is attempted
before performing the RDS Auto Memory operation.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video
sources.
In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
&
Surround modes
The below speaker placements are for 5.1 channel surround sound
The below speaker placements are for 6.1 channel surround sound
system which are;
system which are;
•Dolby Digital
•Dolby Pro Logic II
•DSP
•Dolby Digital EX
•SRS Circle Surround II
•Dolby Digital, Dolby Pro logic II and DSP if "SURR: MIX ON" *
•DVD 6-channel
•DTS
TV / SCREEN
TV / SCREEN
SW
C
SW
C
R
R
SL
SR
SL
SR
SB
No Surround Back speaker
Surround Back speaker
L
Front left speaker
Subwoofer
SL
SR
SB
Surround left speaker
Surround right speaker
Surround back
SW
C
Center speaker
Front right speaker
R
Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
Circle Surround II, SRS and (O) symbol
are trademarks of SRS Labs, Inc. Circle
Surround II technology is incorporated
under license from SRS Labs, Inc.
“DTS”and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Dolby Digital
DTS
The Dolby Digital surround format lets you enjoy up to 5.1 channels
of digital surround sound from Dolby Digital program sources (such
The DTS multi-channel audio format is available on CD, LD and DVD
software. DTS is a strictly digital format and cannot be decoded inside
most CD, LD or DVD players. For this reason, if you attempt to listen
to DTS encoded software through the analog output of your new CD,
LDorDVDplayer, youwillexperiencedigitalnoisein mostcases. This
noise can be quite loud if the analog output is connected directly to
a high power amplification system. Proper measures for playing the
digital output as described below should be taken to avoid this
situation. To enjoy DTS Digital Surround playback, an external 5.1
channel DTS Digital Surround decoder system or an amplifier with a
built-in DTS Digital Surround decoder must be connected to the
digital output (S/P DIF, AES/EBU or TosLink) of a CD, LD or DVD
player.
as Laserdisc or DVD software marked
previous Dolby surround, Dolby Digital provides even better sound
quality, greater spatial accuracy, and improved dynamic range.
). Compared with
Although a full set of speakers (front left, right, and center, surround
left and right, and a subwoofer) is required for true 5.1 channel Dolby
Digital surround sound, this receiver lets you enjoy Dolby Digital (and
Dolby Surround) program sources, even if you connect only the front
speakers.
Dolby Digital EX
All models are incorporated with the DTS decoder.
Dolby Digital EX is an extension of Dolby Digital technology, Dolby
Digital EX creates six full-bandwidth output channels from 6.1-
channel sources. This is done using a matrix decoder that derives
three surround channels from the two in the original recording. This
is achieved by using three different surround signals, Left Surround,
Right Surround, and Back Surround, each driving its own array of
speakers. Think of it as adding a center channel for the rear speakers,
which give more diffuse and natural surround effect, even if you
wanted the ability to completely encircle the audience with sound,
positioning sound effects exactly where they wolud be heard in real
life. For best results, Dolby Digital EX should be used with movie
soundtracks recorded with Dolby Digital Surround EX which contain
a digital flag that will automatically activate this feature. However, for
titles released prior to late 2001, this feature has to be activated
manually.
DTS has a .1 or LFE channel.
The indication “LFE” appears in the display when a signal is being
input for this channel.
DVD 6-channel mode
Using a DVD player or the like equipped with six (5.1) output channels
and the receiver, you can enjoy multi-channel encoded DVD source
material in all its splendor. Since the source signals are digital and
each channel is input independently, the resulting sound quality,
sense of spaciousness, and dynamic range are superb.
Although a full set of speakers (front left, right, and center, surround
left and right, surround back and a subwoofer) is required for true 6.1
channel Dolby Digital Surround EX sound, this receiver lets you enjoy
Dolby Digital (and Dolby Surround) program sources, even if you
connect only the front speakers.
The indication "LFE" appears in the display during DVD 6-channel
mode selection.
Note
Although only Dolby Digital soundtracks incorporate a separate low
frequency channel, connecting a subwoofer will also improve deep
bass performance in the other surround modes.
LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep
bass sound effects.
The indication “LFE” appears in the display when a signal is being
input for this channel.
Dolby PRO LOGIC II
Dolby Pro Logic II was designed specifically to provide a new sense
of spatiality, directionality and articulation of sounds from Dolby
Surround encoded sources (such as video and Laserdisc software
marked
). This is achieved with an intelligent, built-in
feedback logic design, a matrix surround decoding and the decoding
of stereo, full bandwidth surround outputs. The PRO LOGIC II modes
programmed into this receiver are “MOVIE”, “MUSIC” and “PRO
LOGIC”. The “MOVIE” mode of the PRO LOGIC II has preset
characteristics to produce a calibrated, high-level surround sound
playbackwhilethe“MUSIC”modehasuser-adjustablecharacteristics
to offer the three optional controls, like “Dimension”, “Center
Width” and “Panorama” modes to allow optimization of the
soundfields as desired. The “Dimension” control allows the user to
gradually adjust the soundfield either towards the front or towards
the rear; the “Center Width” control allows various adjustment of the
left-center-right speakers’ balance; the “Panorama” mode extends
the front stereo image to include the surround speakers for an
exciting “wraparound” effect with side wall imaging.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DSP mode
The DSP mode lets you add the atmosphere of a live concert or hall
to almost any type of program source. These modes are particularly
effectivewhenusedwithstereoprogramsources, likeCD, television,
and FM radio. You might enjoy trying the ARENA, JAZZ CLUB,
THEATER, STADIUM or DISCO mode the next time you watch a
concert or sporting event!
SRS Circle Surround II
SRS Circle Surround II™ improves on its predecessor CS-5.1™
resulting in the CS-6.1™ system, enabling you to listen to realistic,
multi-channel, surround sound playback from a stereo source or
conventional surround-encoded video source. You already enjoy
listening to Dolby Digital/DTS multi-channel sound with your multi-
speakers. Now you can listen to audio CDs, MDs, Broadcast and
Home Theater using your multi-speakers. You will discover a new
type of sound through SRS Circle Surround II.
The CS system dramatically reduces storage space requirements for
multi-channel content. It creates a listening environment that places
the listener “inside” music performances, and dramatically improves
both hi-fi audio and conventional surround-encoded video material.
The CS decoder also includes the SRS technologies Focus™ and
TruBass™. Focus electronically raises the sound stage from the
speaker location to an optimal position. TruBass creates deep, rich
bass in small speaker systems without the need for a subwoofer.
What's DSP?
DSP stands for Digital Signal Processor.
The way a sound is heard in an actual environment depends on a
varietyofdifferentfactors. Oneofthemostimportantisreverberation
(the act of decaying elements of sound echoing in various places).
The DSP modes produce the feeling of presence by using the DSP to
create reverberation, without spoiling the sound quality of the original
signal.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Surround play
When you select DOLBY DIGITAL
“DOLBY DIGITAL” will be displayed.
The DTS compatible models can reproduce a CD, DVD, or LD carrying the
DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
DOLBY DIGITAL
THX
Surround EX
the
DOLBY PRO LOGIC can be used when playing video, DVD, or LD
software bearing the mark.
mark and DOLBY DIGITAL format digital broadcasts (etc.).
A
B
COAXIAL
ANALOG
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
SR
SRS Circle Surround enables you to listen to multi channel sound from
II
the stereo source.
When the DTS signal is input :
(The DTS indicator lights up.)
DSP
INPUT MODE
1 DTS
2 STEREO
: (DTS indicator lights up.)
: Normal stereo playback.
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input :
1 PLII MOVIE
2 PLII MUSIC
3 PRO LOGIC
:
:
:
PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
Input Selector
LISTEN MODE
Input
Selector
4 CSII CINEMA : CS 6.1 surround.
(The CS II indicator lights up.)
CS 6.1 surround.
5 CSII MUSIC
6 CSII MONO
7 STEREO
:
:
:
(The CS II indicator lights up.)
CS 6.1 surround.
(The CS II indicator lights up.)
Normal stereo playback.
(The STEREO indicator lights up.)
Input Mode
Listen Mode 5/∞
•DolbyDigitalorDTSsignalhavingmorechannelsthanthemaximum
number of playback channels available using the receiver’s current
settings is input, downmixing is performed to match the number of
available channels.
DSP Mode
Preparations
• Turn ON related components.
• Complete “Preparing for surround sound” (speaker settings).
DSP mode (Digital Signal Processor).
3
&
• Use the Input Selector keys to select the component you wish to play
back with surround sound.
• Use the INPUT MODE key to select the input mode (analog or digital)
DSP can produce these effects without spoiling the sound quality of
the original music or video source.
for the source you wish to play back.
8
1 Pressing the DSP key or DSP Mode key will display the
• Noise will be produced when a DTS source is played by selecting the
current DSP MODE status.
analog input.
2 Each press of the key will switch to the next status as shown
bellow:
Start playing the video software.
1
1 ARENA
: DSP surround ARENA mode.
: DSP surround JAZZ CLUB mode.
: DSP surround THEATER mode.
: DSP surround STADIUM mode.
: DSP surround DISCO mode.
Use the LISTEN MODE knob or Listen Mode 5/ ∞keys to
2select the listening mode.
2 JAZZ CLUB
3 THEATER
4 STADIUM
5 DISCO
The listening mode settings are stored separately for each input. If
the input mode is set to full auto (“AUTO DETECT” lights), the
receiver selects the optimal listening mode automatically based on
the type of input signal and the speaker settings.
• TheDSPmodeselectionisdisplayedforapproximately3seconds.
4Adjust the volume.
Each turn of the LISTEN MODE knob or press of the Listen Mode
5/ ∞ keys switches the setting as listed below.
Notes
The listening mode settings are different depending on the type
of input signal.
• Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
• When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listening modes)
from a single component, be sure to use a Dolby Digital compatible
source component.
When the DOLBY DIGITAL or DOLBY DIGITAL EX signal is
input :
(The DOLBY DIGITAL or PRO LOGIC, indicator lights up.)
1 DOLBY DIGITAL : DOLBY DIGITAL surround.
2 DOLBY D EX
3 PLII MOVIE
: DOLBY DIGITAL EX surround.
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
: Normal stereo playback.
4 PLII MUSIC
5 PRO LOGIC
6 STEREO
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DVD 6-channel playback
Convenient functions
UsingaDVDplayerorthelikeequippedwithsix(5.1)outputchannelsand
the receiver, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
STEREO DIMMER MULTI CONTROL
VOLUME
CONTROL
INPUT MODE
SOUND
LISTEN MODE
TUNER
DVD/6CH
(Multi %/fi,
@/ #)
DVD/6CH
Sound
Dimmer
Listen Mode5/∞
VOL
/
Stereo
Input Mode
Preparations
Adjusting the sound
• Connect your DVD player to the DVD/6CH jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.
You can make further adjustments to the sound while listening to
playback in the surround mode.
&
1
For the remote control, press and hold the TUNER key for more
than 3 seconds to switch to receiver mode.
1Press “DVD/6CH” as the input source.
• If speaker system B is on when “DVD/6CH” is selected as the input
source,itswitchesoffandspeakersystemAturnsonautomatically.
2 Press the SOUND key and then use the ∧/∨ keys or @/# keys
until the desired item appears in the display.
2Select "6CH INPUT" by pressing the INPUT MODE key.
3Start playback of the DVD software.
4Adjust the volume.
Each time you press the ∧/∨ keys or @/# keys, the menu
changes as follows:
Note that some items are not displayed in certain modes.
1 CNTR (Center speaker level adjustment)*
2 SR (Right surround speaker level adjustment)*
3 SB (Surround back speaker level adjustment)*
4 SL (Left surround speaker level adjustment)*
5 SUBW (Subwoofer level adjustment)*
• It is not possible to adjust the volume level or sound quality (SET
UP, SOUND, LISTEN MODE, ACTIVE EQ and TONE key will not
be functional) of the channels separately when the receiver is in
the 6CH INPUT mode. Adjust the volume with the controls of the
DVD player.
6 INPUT (Input level adjustment - analog mode only)
(
7 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital mode only)
8 PANORAMA (Panorama mode ON/OFF)**
9 DIMENSION (Dimension adjustment)**
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
0 CENTER WIDTH (Center width adjustment)**
- CENTER FOCUS (Center focus adjustment)***
= CSII DLY (Rear speaker delay adjustment)***
~ CSII GAIN (Input gain adjustment)***
! TruBass (TruBass adjustment)***
*
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off or when the input selection is changed.
** Pro Logic II Music mode only.
*** CS II mode only.
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
setting as desired.
• The adjustment item is displayed for approximately 8 seconds.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Midnight mode (Dolby Digital mode only)
Center Width mode (Pro Logic II Music mode only)
Center width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
When watching movies at night , you might not be able to raise the volume as
loud as normal. Midnight mode compresses the dynamic range of previously
specified heavy sound passage of the Dolby Digital sound track (like scenes with
sudden increases in volume) to minimize the difference in volume between the
scenes with heavy sound passage and scenes with normal sound passage. This
makes it easy to hear all of the sound track, even when listening at low volumes.
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“CENTER WIDTH” appears on the display.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“MIDNIGHT” appears on the display.
• This can be selected only if CD/DVD, DVD/6CH or VIDEO 2 is selected
as the source and the listen mode is set to “DOLBY DIGITAL.”
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the left-center-right output.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the ON or OFF setting.
Center image will be heard from center speaker only.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
A
B
PRO LOGIC
DOLBY DIGITAL
THX
Surround EX
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
A
B
CLIP
COAXIAL
ANALOG
LFE
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
STEREO
TUNED
SL
S
SB
SR
SL
S
SB
SR
Center image will be heard from left and right speakers only.
• The adjustment item is displayed for approximately 8 seconds.
• Some Dolby Digital software may not be compatible with the
Midnight mode.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
• When in other position, center image from center speaker, left and
rightspeakerscanbeheardsimultaneouslywithvariouscombinations.
Panorama mode (Pro Logic II Music mode only)
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
Circle Surround II mode
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“PANORAMA” appears on the display.
When you select the circle surround II mode, you will be able to enjoy the
multi surround sound from the stereo source.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to
Use the LISTEN MODE knob or Listen Mode 5/∞keys for CS II selection.
select PANORAMA ON or OFF.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
Center Focus mode (CS II mode only)
Center focus elevate level adjustment allows you to enjoy an enchanced
sound when you select CS II CINEMA/MUSIC/MONO. It repositions the
sound image to an optimal position more natural to the listener through
the center image.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“CENTER FOCUS” appears on the display.
Dimension mode (Pro Logic II Music mode only)
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
LFE
STEREO
TUNED
SL
SB
SR
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“DIMENSION” appears on the display.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the center elevation level.
• The adjustment range is from 0 to 10.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the soundfield towards the rear or the front.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
Soundfield is adjusted towards the front.
STEREO
TUNED
SL
SB
SR
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
• CENTER FOCUS will not be available when the center speaker is OFF.
STEREO
TUNED
SL
S
SB
SR
CS II Rear Delay adjustment mode (CS II mode only)
Soundfield is in neutral position.
CS II Rear Delay adjustment provides a better sound effect from the rear
speakers.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“CSII DLY” appears on the display.
STEREO
TUNED
SL
S
SB
SR
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the rear speaker.
• The adjustment range is from 0 ms to 25 ms.
Soundfield is adjusted towards the rear.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
MATRIX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
AUTO
MEMO
L
C
SW
R
AUTO
MEMO
LFE
LFE
STEREO
TUNED
STEREO
TUNED
SL
SB
SR
SL
S
SB
SR
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
CS II Gain adjustment mode (CS II mode only)
Display dimmer adjustment
CS II GAIN allows user to adjust the input gain for the Circle Surround II
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
processing.
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“CSII GAIN” appears on the display.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the input gain.
• The adjustment range is from 0 to -18.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
L
L
L
C
SW
SW
SW
R
R
R
AUTO
MEMO
AUTO
MEMO
LFE
LFE
STEREO
TUNED
STEREO
TUNED
SL
SB
SR
STEREO
SP
A
C
TruBass adjustment mode (CS II mode only)
TruBass adjustment provides deep, rich bass sound to various speakers.
1 Press the SOUND key, then press the ∧/∨ keys or @/#keys until
“TruBass” appears.
STEREO
SP
A
C
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the following;
1 TruBass OFF
2 TruBass SW
3 TruBass LR
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to “STEREO”.
4 TruBass SW + LR
• Afterselecting2,3or4,TruBassspeakersizeandleveladjustment
selection will be available.
• In FULL AUTO input mode the listen mode will automatically be
STEREO.
• When in DIGITAL MANUAL input mode (listen mode is not STEREO),
“96kHz LPCM” will appear in the display and no sound can be heard
from the speakers.
3 For TruBass speaker selection, use the MULTI CONTROL knob
or Multi (5/∞) keys to select any of the following display;
Press the Listen Mode or Stereo key (the listen mode changes to the
STEREO mode) to output sound from the speakers.
1 TruBass LARGE
2 TruBass MID
3 TruBass SMALL
4 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the TruBass Level.
• The adjustment range is from 0 (Trubass OFF) to 10.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
SB
SR
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Theremotecontrolsuppliedwiththisreceiverisalsocapable
of controlling components from a variety of manufacturers
once you register the appropriate setup codes into the
remote control unit.
• Point the remote control at the component and press SRC Power
key once. It should turn on/off but if it does not, repeat step 2to 4
• If the component still does not work, try searching for the code.
Repeat steps 2to 4to register additional components until
5
Low battery warning
all components have been registered.
Replacealltwobatterieswithnewoneswhenyounoticeashortening
of the distance from which the remote control will operate.The
remote control is designed to retain setup codes in memory while
you change batteries.
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
Registering setup codes for other components
LED
Searching for your codes
Source
keys
SRC Power
If your component does not respond after trying all the codes listed for
your component, or if your component is not listed at all, try searching
for your code.
Numeric keys
For example, to search for code for your TV:
Press the TV key once. Next, press and hold the RemoteSetup
key until the LED blinks twice, then release the Remote Setup
key.
1
Remote
Setup
2Press the numeric key to enter "9 - 9 - 1".
•The LED will blink twice.
Find the setup code of the component to be registered.
1
3Point the remote control at the TV and slowly alternate
• Refer to the setup code lists to find the setup code for the
component to be registered.
‡
between pressing the SRC Power and TV key.
Example: To register a DVD made by KENWOOD, you would enter
“0534”.
•Stop when the TV turns on/off.
•In the search mode, the remote control will send IR codes from its
library to the selected device, starting with the most popular code
first.
Input
Component
Maker
Code
Key
(DVD)
DVD player KENWOOD
0534
DVD
4Press the Remote Setup key once to lock in the code.
5To search for the codes of your other components, repeat
steps 1through 4, but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO).
Source key
Other components
TUNER
Receiver (Kenwood)
DVD/6CH
CD/DVD
DVD (other manufacturers')
CD and MD (Kenwood)
•PHONO key has to be re-assigned to another key before a setup
code can be programmed.
MD/Tape
VID1 / AV AUX
VID2
Cassette deck (Kenwood)
VCR and PVR (other manufacturers')
Cable and DTV decoder (other
manufacturers')
Checking the codes
VID3
PHONO
TV
Satellite (other manufacturers')
Additional key for re-assigning
If you have setup the remote control using the procedures described in
“Searching for your codes”, you may need to find out which four-digit
code is operating your equipment:
TV/VCR combo, TV/DVD combo, TV
(other manufacturers')
For example, to find out which code is operating your TV:
Press the TV key once. Next, press and hold the RemoteSetup
key until the LED blinks twice, then release the Remote Setup
key.
1
Press the source keys (DVD/6CH, CD/DVD, VID1, VID2, VID3,
2
TV, MD/TAPE, AV AUX, PHONO).
7
• PHONO key has to re-assigned to another key before a setup
2Press the numeric key to enter "9 - 9 - 0".
code can be registered.
fl
•The LED will blink twice.
• While in Tuner mode, setup code function will not be available.
Press and hold the Remote Setup key until the LED blinks
twice, then release the Remote Setup key.
3To view the code for the first digit, press “1” once. Wait for 3
seconds, counts the number of times the LED blinks (e.g.,
blinks=3) and write down that number.
3
4
Press the numeric key to enter the four-digit code for the
component to be registered.
•If a code digit is “0”, the LED will not blink.
• If performed correctly, the LED will blink twice.
Continued to next page
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Operating other components
This operation lets you operate the registered components.
KENWOOD audio components with system control turn on and off
automatically with the receiver via the system control connections.
4Repeat step 3three more times for the remaining digits. Use
“2” for the second digit, “3” for the third digit, and “4” for the
fourth digit.
5To check the codes of your other components, repeat steps
1 through 4, but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO) for the component you are checking.
Source
keys
• As suggested earlier on, write down each of the four-digit code.
• PHONO key has to be re-assigned to another key before a setup
code can be programmed.
SRC Power
Re-assigning device keys
The remote control can be setup to control second TV or VCR, or any
combination of eight home entertainment components.
For example, to control the operation of two different VCR using the
remote control, the user need to re-assign the unused VID2 key to
operate the second VCR(VID1) as follows:
Use the Source keys to select the component you desire.
• Pressing the source keys also changes the input selector on the
receiver.
1
Press and hold the Remote Setup key until the LED blinks
twice, then release the Remote Setup key.
1
2Press the numeric key to enter "9 - 9 - 2".
• When you operate your registered cassette deck, CD player,
DVD player, Cable, Satellite, DTV Decoder, VCR or TV, go to
step 2.
• The LED will blink twice.
• When you operate the CD player, Cassette deck, MD player, or
Tuner with system control connection, go to step 3.
3Press VID1 key once, then press the VID2 key once.
• The user now can operate VID2 as a second VCR along with VID1.
• Refer to the table in the previous page for the combination of
Press the SRC Power key.
2
3
source keys and the other components assignment.
fi
• To return to the receiver operation mode, press the TUNER key for
more than 3 seconds.
4To re-assign other device keys, repeat steps 1through 3 by
substituting the key sequence from the below chart for the
most popular components:
Press the operation keys you desire.
The remote control mode remains at the selected input. If you
wish to operate another component, repeat step 2or 3.
w
To re-assign key
Note
• Be sure to point the remote control at the remote sensor on the
receiverwhenyouwanttooperateKENWOODcomponentsconnected
by system control cords. Otherwise, point the remote control at the
component you want to operate.
• To initilize the remote control, press the Remote Setup key until the
LED blinks twice. Then press the numeric key to enter “9-8-1”. The
LED will blink twice.
Sequence
Perform
TV as 2nd VID1 key
TV as 2nd VID2 key
TV as 2nd CD/DVD key
TV back to TV key
VID1 as 2nd TV key
VID1 as 2nd VID2 key
VID1 as 2nd CD/DVD key
VID1 back to VID1 key
Remote Setup - 9- 9 - 2 VID1 - TV
Remote Setup - 9 - 9 - 2 VID2 - TV
Remote Setup - 9 - 9 - 2 CD/DVD - TV
Remote Setup - 9 - 9 - 2 TV - TV
Remote Setup - 9 - 9 - 2 TV - VID1
Remote Setup - 9 - 9 - 2 VID2 - VID1
Remote Setup - 9 - 9 - 2 CD/DVD - VID1
Remote Setup - 9 - 9 - 2 VID1 - VID1
To clear the re-assignment and reset the remote control to its
original operation mode:
5
1 Press and hold the Remote Setup key until the LED blinks
twice, then release the remote setup key.
2 Press the numeric key to enter "9 - 9 - 2".
3 Press VID2 key twice.
• When a re-assignment is done, the LED will blink twice to confirm
your choice. At that time, you will need to program the remote
control in order to control the new component.
• If an invalid key sequence is entered, the LED blink once and return
to normal operation.
• When in Tuner mode, re-assignment is not available.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
Satellite setup codes
Maker
Setup codes
Maker
Setup codes
Maker
Setup codes
Gooding
Grundig
0571
ABsat
AST
Akai
0832, 0123
0321, 0351
0515
0455, 0421, 0515,
0613
Phonotrend
Pioneer
Praxis
Preisner
Promax
Prosat
Quadral
RFT
Radiola
Radix
SAT
SEG
SKY
SM Electronic
STVI
0288, 0592
0853, 0329, 0352
1123
0132
0455
0173, 0847, 0139, 0140,
0571, 0750, 0805, 1150
1011, 1159
0173, 0396, 0397, 0398,
0495, 0501, 0573, 0882,
1085
0455
0668
0283, 0863, 1176
0243, 0288, 0794
1011, 1159
0108
0871
0592
0710
0515, 0571
0200, 0173, 0123, 0249,
0331, 0358, 0442, 0480,
0553, 0622, 0658, 1057,
1224
0794
0331
0173
0421
1043
0520, 0607
0421
0592
1122
1017
0369
0108, 0573
0455, 0520, 0592, 1017,
1083
0200
0495, 0750
0571
0853
0243
0713, 0084, 1215
HDT
Hirschmann
Alba
Aldes
Amstrad
0288
0288
0628
0847, 0252, 0345,
0501, 0675, 0689,
1113
0713, 0288, 0369
0421
0834, 1043, 1205
0243
0142, 1129
0108
0173, 0358, 0501,
0520, 0548
0396
0369, 0530, 0834
0668, 0710, 0515
0369
Hitachi
Houston
Humax
Huth
Hyundai
ITT
InVideo
Intervision
JOK
0200, 0288
0200
0396, 0882, 1113
0321, 0351
0369, 0421, 0742, 1087
0856
0713, 0157, 0240, 1200
0417
0710, 0520, 0690, 0885
0455
0820, 1114, 1253
0108
1017, 1243
0421, 0520, 0692
0605
Ankaro
Anttron
Arcon
Armstrong
Aston
Astra
Astro
JVC
Kathrein
Saba
Sabre
Sagem
Salora
Avalon
Axis
BT
Best
Samsung
SatPartner
Satcom
Satstation
Schneider
Schwaiger
Seemann
Siemens
Sky Television
Skymaster
KeyWest
Kosmos
Kreiselmeyer
Kyostar
L&S Electronic
La Sat
Lenco
Lennox
Lifesat
Logix
Blaupunkt
Boca
British Sky
Broadcasting
CNT
Cambridge
Canal Digital
Canal Satellite
Canal+
CityCom
Commlink
Connexions
Conrad
Crown
Cyrus
D-box
DMT
DNT
Digenius
Distratel
Dynasat
EIF
0173
0243, 0829
0847, 1175
1083
0805
1111
0520
0515
0853
0853
0853
0115, 0818, 1176
0288
0396
0115, 0607
0243
0200
0723
1075
0200, 0396
0299
0084, 0885
0679
0417
0312, 0853, 0871,
0713, 0167, 0396,
0453, 0454, 0511,
0610, 1086, 1169
0421
1017
0679, 1025, 1026
0331, 0863
0711
0252, 0675
0455, 0108, 0397,
0414
1101
0871
0421
0396, 0369, 0414,
0417, 0421
0283, 0288, 0833,
0834, 0863, 1101,
1111
0321
0818
0853
0396, 0530
0173, 0683
1014
0713, 0240, 0288, 0605,
0628, 0880
0132
0847
Lupus
Luxor
Manhattan
Smart
Sony
Starland
Strong
Sunstar
Supernova
TPS
1122
0879, 0132, 1105, 1159
Marantz
Maspro
Matsui
0794
0887
0820
0455
MediaSat
Mediamarkt
Metronic
Minerva
Morgan’s
Multichoice
Multistar
Myryad
Neuhaus
Neusat
NextWave
Nikko
Tantec
TechniSat
0501, 0548, 1099, 1100,
1195
0421
0243, 0613
0605
0114, 0157, 0501
0455, 0853, 1012, 1046
0668
0571
Telefunken
Teleka
Telesat
Telestar
Thomson
Tonna
Topfield
Triad
Triasat
0132, 0243, 0683, 0829
0879, 0642
0331
0200
0501
0692, 0834
0732
0713
0455, 0751, 0723, 0873,
0108, 0397, 0573, 1023,
1127
1022
0501
0847, 0455, 0887, 0720,
0497, 0241, 0791, 0795,
0867, 1175
0571
0501
0879, 0615
0847, 1104
0455
Echostar
Emanon
Engel
Eurostar
FTE
Ferguson
Fidelity
Finlux
1206
0321, 0351
0414, 0501
0115
Nokia
Triax
Twinner
Universum
VTech
Ventana
Visiosat
Vortec
0136
Orbit
Orbitech
Pace
0173, 0571
0351, 0690
0200
1042
0421
0455, 0173, 0321, 0351,
0372, 0396, 0638, 0690
0123
0114, 0321, 0331, 0520,
0818, 1075
0856
0794
Force NO AS
Fracarro
Freecom
Fuba
Palladium
Palsat
Panasat
Panasonic
Panda
Wisi
XSat
Zehnder
Galaxis
Patriot
Philips
0515
Zenith
Zwergnase
Galaxisat
Gardiner
Gold Box
0455, 0853, 0133, 0200,
0710, 0292, 0571, 0750,
0805, 0898, 1118
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
TV setup codes
Maker
Setup codes
Maker
Setup codes
Maker
Setup codes
Grandin
0282, 0610, 0802,
0800, 0803
0556, 0195, 0587,
0070, 0191, 0487,
0535, 0554, 0706,
0900, 0803
0009, 0282, 0412,
0803
0037, 0556, 0428,
0802
0516
0093
0037, 0009, 0218,
0036, 0179, 0803
AGB
ASA
Acura
Admiral
Adyson
Aiwa
0516
0104, 0802
0009
0163
0217
0701, 0800
0208, 0516, 0602,
0708, 1537
0272
0803
0264, 0218, 0358,
0493
0037, 0009, 0218,
0036, 0211, 0235,
0371, 0668, 0805,
0803
0294
0217
0037, 0009, 0177,
0371, 0412, 0433,
0516, 0800
0009, 0803
0216, 0217
0218, 0802
0206
0037, 0109
0206, 0336
0282
0294
0218
Clatronic
Condor
Contec
Continental Edison
Crosley
Crown
0370, 0247
0370
0009, 0216, 0036
0196, 0198, 0399
0074, 0084
0037, 0009, 0370,
0418, 0805, 0803
0218
0037, 0009, 0374,
0499, 0805
0218
0037, 0803
0009
Grundig
HCM
Akai
Hanseatic
Cybertron
Daewoo
Akito
Akiba
Akura
Hantarex
Havermy
Hinari
Dainichi
Dansai
Dayton
De Graaf
Decca
Alba
Hisawa
Hitachi
0282, 0455
0208, 0548
0037, 0072, 0272,
0516, 0800
0109, 0578, 0163,
0217, 0036, 0043,
0196, 0198, 0225,
0481, 0548, 0730,
0800
0216, 0374
0037, 0264, 0282,
0803
0264, 0217, 0371
0218
0074
0371
0163, 0548
0802, 0805
0370, 0074, 0084,
0247, 0418, 0630,
0800
0037
0163
0072, 0516
0037, 0163, 0247,
0512
0037, 0264, 0217
0218
0901
0053, 0036, 0653,
0094, 0190, 0192,
0371, 0606, 0683
0217, 0009, 0218,
0216, 0282, 0803
0163, 0206
0610
0556
0037, 0235
0216
0259, 0435
0037, 0803
0009
0805
0037, 0264, 0072,
0294, 0803
Allorgan
Amplivision
Amstrad
Denon
Dixi
Dual
Dual Tec
Dumont
Elbe
Elcatech
Elin
Elite
Elta
Erres
ESC
0145
0037, 0009
0336, 0519
0217
0070, 0800
0259
0803
0037, 0548
0218
0009
0037, 0012
0805
0516
0206
0037, 0109, 0073,
0190, 0193, 0324,
0335, 0560
0802, 0803, 0009,
0216, 0217, 0247,
0294, 0668
0216, 0193, 0800
0208, 0346
0037, 0070, 0072,
0104, 0179, 0346,
0516, 0800
0370, 0217, 0208,
0104, 0303
0455
0193
0037
0163, 0264, 0247
0072, 0206, 0683
0264, 0179, 0294,
0303, 0800
0037, 0217, 0043,
0072, 0516
0218
0009
0163, 0218
0178, 0037, 0109,
0217, 0290, 0802
0803
0037, 0217, 0036,
0072, 0179, 0235,
0371, 0374, 0499,
0634, 0802, 0800,
0805, 0803
0370
0163
0037, 0217, 0208,
0045, 0072, 0339,
0516
Huanyu
Hypson
Anitech
Arcam
Asuka
Atlantic
Audiosonic
Autovox
BPL
BSR
BTC
Bang & Olufsen
Barco
Basic Line
ICE
ICeS
IR
ITS
ITT
ITV
Imperial
Europhon
Expert
Ferguson
0565
0380
0009, 0218, 0805,
0803
0800
0037, 0505, 0010,
0512, 0535, 0554
0178
0370, 0486, 0714,
0715
0037
0217
Indiana
Ingelen
Inno Hit
Interfunk
Firstline
Baird
Baur
Intervision
Isukai
JMB
Fidelity
Finlandia
Finlux
Beaumark
Beko
JVC
Beon
Binatone
Blaupunkt
Kaisui
Fisher
0195, 0191, 0200,
0327, 0328, 0535,
0554
Kapsch
Karcher
Kathrein
Kendo
Kingsley
Kneissel
Korpel
Koyoda
Lenco
Leyco
Flint
Forgestone
Formenti
Frontech
Fujitsu
Blue Sky
Blue Star
Bondstec
Boots
0218, 0668, 1037
0282
0247
0217
0109, 0196, 0198,
0335
Funai
Brandt
GEC
Britannia
Bush
0216
0355, 0037, 0009,
0218, 0036, 0211,
0272, 0282, 0294,
0371, 0374, 0519,
0668, 0698, 0805,
0803
GPM
Geloso
Genexxa
GoldStar
Liesenk & Tter
Loewe
Luma
Luxor
M Electronic
0037
0512, 0802
0206
CGE
0074, 0084, 0247,
0800
Goldhand
Goodmans
0194
0037, 0109, 0163,
0009, 0217, 0057,
0104, 0346, 0374,
0480, 0800
0512
0247, 0516
0516
0648
0264, 0217, 0235,
0803
CS Electronics
CTC
Carrefour
Cascade
Cathay
Centurion
Cimline
Clarivox
0216
0247
0036
0009
0037
0037
0009
0037
MTC
Gorenje
Graetz
Granada
Magnadyne
Magnafon
Magnum
Manesth
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
Maker
Setup codes
Maker
Setup codes
Maker
Setup codes
Sonoko
Sonolar
Sony
0037, 0009
0163, 0208
0011, 0505, 0036,
0000, 0010, 0651,
0652, 1010, 1505,
1651
0037, 0418
0009, 0218, 0217
0163, 0206, 0259
0294, 0355
0800
0800
0218
0037
0447
0163, 0218, 0217,
0072
0217, 0036, 0043,
0800
0037, 0217, 0072,
0516, 0800
0037, 0698, 0712,
1437
Marantz
Mark
Matsui
0037, 0556
0037
0037, 0009, 0217,
0036, 0208, 0011,
0035, 0072, 0177,
0211, 0235, 0272,
0294, 0355, 0371,
0487, 0516
0043
0037, 0012
0668
0009, 1037, 0802,
0800
0337, 0803
0275, 0367, 0447,
0535, 0802
0070, 0487, 0535,
0554
0412
0036, 0108, 0033,
0512, 0535
0216, 0290, 0291,
0292, 0516
0009, 0216, 0800,
0803
0800
0556
0170, 0704
0037, 0337
0037, 0556, 0505,
0191, 0554
Proline
Protech
0800
0037, 0009, 0264,
0217, 0247, 0337,
0418, 0668
Pye
Quelle
0012
0037, 0505, 0010,
0011, 0070, 0074,
0084, 0104, 0200,
0327, 0328, 0512,
0535, 0554
0036
0037
0070
0428
0037, 0012
0516
0036
0037
0163, 0264, 0206,
0259
0009, 0264, 0218,
0418, 0802, 0805,
0803
0037, 0012, 0043,
0193
0264, 0217, 0036,
0668
0010, 0177, 0294,
0516
0109, 0163, 0196,
0198, 0335,
0610
0009, 0264, 0011,
0033, 0177, 0211,
0235, 0516
0163, 0194, 0548
0516
0037, 0556, 0009,
0370, 0264, 0217,
0587, 0290, 0618,
0644
0216
0655, 0706
0036, 0208, 0011,
0045, 0072, 0104,
0157, 0339
Soundwave
Standard
Stern
McMichael
Mediator
Medion
Sunkai
Questa
R-Line
RBM
Sunstar
Suntronic
Susumu
Sysline
T + A
Memorex
Memphis
Metz
RFT
Radiola
Radiomarelli
Rank Arena
Revox
Minerva
Tandy
Minoka
Mitsubishi
Tashiko
Tatung
Teac
Rex
Roadstar
Mivar
Multitech
SBR
SEG
SEI
Tec
0217, 0247
0250, 0650
0179
0109, 0625, 0074,
0084, 0101, 0335
Technics
Technol Ace
Telefunken
Murphy
Myryad
NEC
NEI
Neckermann
Teletech
Teleton
Tensai
Tenosal
Texet
0009
Saba
0217, 0036, 0206
0218, 0294, 0800
0803
0218, 0216
0109, 0625, 0196,
0198, 0399
0037, 0505, 0035,
0072, 0074, 0084,
0104, 0190, 0192,
0193, 0499, 0512,
0535
Sagem
Saisho
Nesco
Nikkai
0179, 0803
0037, 0264, 0218,
0216, 0035, 0072,
0337
0473, 0480, 0548,
0606
0109, 0196, 0198,
0560
0163, 0800
0433
0037, 0177, 0235,
0294, 0355, 0516,
0655
0264, 0218, 0217,
0072, 0412, 0493,
0802, 0800, 0803
Thomson
Salora
Sambers
Samsung
Nokia
Thorn
Nordmende
Oceanic
Onwa
Orion
Sandra
Sansui
Sanyo
Tomashi
Toshiba
0282
0036, 0508, 0035,
0070, 0243, 0718,
1508
0177, 0243, 0516
0206, 0303
0192
0037, 0370, 0264,
0074, 0104, 0346,
0492, 0802, 0535,
0800
0037
0247
0217
0802
0800
0163
0217
0037
0036
0037, 0216
Osaki
Triumph
Uher
Ultra
Schaub Lorenz
Schneider
0800
Oso
Osume
Otto Versand
0218
0072, 0157
0037, 0218, 0057,
0247, 0303, 0336,
0371, 0394, 0668,
1137, 0800, 0803
0163, 0206, 0259
0035
0093, 0036, 1193,
0901
0803
0294
0516
0037, 0195, 0157,
0191, 0200, 0327,
0328, 0535, 0554,
0802
0802
0036
0010, 0177, 0235,
0294, 0516
0163
Universum
0037, 0556, 0505,
0217, 0036, 0010,
0191, 0512, 0535,
0554
0370, 0418, 0802,
0803
Seleco
Sentra
Sharp
Vestel
Palladium
Videosat
Videotechnic
Videomagic
Villain
Voxson
Waltham
Watson
Wega
Panama
Panasonic
0264, 0217
Shintom
Shorai
Siarem
Siemens
0250, 0226, 0650
0126, 0163, 0214,
0274, 0367
0216
0196, 0198
0009
Pathe Cinema
Pathe Marconi
Pausa
Perdio
Philco
Silva
Silver
Sinudyne
White
0800
0074, 0084, 0247
Westinghouse
Yamishi
Yapshe
Yoko
Yokan
Zanussi
0803
0250
0037, 0264, 0217
0803
0206
Philips
0037, 0556, 0012,
0043, 0193, 0374,
0554
0037, 0012
0109, 0163, 0166
0516
Solavox
Sonitron
Sontec
Phonola
Pioneer
Prandoni Prince
Profex
0208
0802, 0037
0009
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
VCR setup codes
Cable setup codes
Maker
Setup codes
Maker
Setup codes
Maker
Setup codes
Oceanic
Okano
Orion
Otto Versand
Palladium
Panasonic
0041
Alcatel
0896, 0897
0276
Asa
Aiwa
Akai
Alba
Baird
Blaupunkt
0081
0348, 0315
0348, 0352, 0004
0081
0041
0162, 0226, 0836,
1562
Birmingham cable
Communications
British Telecom
Cable & Wireless
Cabletime
0348, 0352
0041, 0106, 0315
0315, 0352
0104, 0041
0195, 0226, 0162,
0034
0003, 0105
1068
0448, 0665, 0377,
0271
Pathe Marconi
Pentax
Philco
0041
0042
0038
Cryptovision
Decsat
Director
0600
0423
0476
Brandt
Brandt Electronic
Bush
0320, 0321
0041
0352
Philips
Phonola
Pioneer
Profitronic
Pye
Quartz
Quelle
Radiola
Rex
Roadstar
SBR
SEG
SEI
Saba
0081, 0384
0081
0081, 0067
0240
0081
0046
0081
0081
0041, 0384
0240
0081
0240
0081, 0004
0320, 0041, 0321,
0384
0004
0106, 0043, 0046
0240, 0432
0067, 0041
0104, 0046
0352
0104, 0041
0081
0041
Filmnet
0443
0896, 0897, 0451
1110
0529
0619
0276, 0003
0443, 0019
1112
0817
1068
Combitech
Cyrus
Daewoo
De Graaf
Decca
Denon
Dual
Dumont
ESC
Elbe
Ferguson
Finlandia
Finlux
Firstline
Fisher
GEC
Goodmans
Graetz
0352
0081
0637, 0642
0042
0081
0042
0041
0081, 0104
0240
0038
0320, 0041, 0321
0081, 0104
0081, 0042, 0104
0045, 0043
0104, 0046
0081
0637
0240, 0104, 0041
0081, 0104, 0046
0081, 0195, 0226,
0347
0240, 0352, 0004
0004, 0042, 0041,
0240
0106, 0240, 0104,
0041, 0046, 0384
0004
0081
0067, 0041, 0384
0106
0041
0081, 0162, 0004,
1562
0240, 0004
0048, 0106, 0043,
0104, 0046
0038
0045
0081
0348, 0352, 0004
0348
0104, 0046
0195, 0162, 0347,
1562
0195
0081, 0067, 0043
0081
0067, 0041, 0038
0081
France Telecom
Golden Channel
Grundig
HyperVision
Jerrold
MNet
Mr. Zap
Noos
Ono
PVP Stereo
Visual Matrix
Pace
Philips
Pioneer
0003
1068, 1060
0619
0144
0817
0277, 0008, 0477
0276
0443
1110
0003
0286
0003
0250
1064
0105, 0716
0000
Saisho
Salora
Samsung
Sansui
Sanyo
Sagem
Scientific Atlanta
Supercable
Tele+1
Thomson
Torx
Granada
Grundig
Saville
Schaub Lorenz
Schneider
Seleco
Sharp
Shintom
Shorai
Siemens
Singer
Sunudyne
Sonolor
Sony
Hinari
Hitachi
Tudi
United Cable
Videoway
Visionetics
Westminster
Zenith
ITT
0048
0104
0004
0081, 0195, 0104
0045
0081, 0004
0046
0032, 0033, 1032,
0034
Ingersol
Interfunk
JVC
Kendo
Kenwood
Loewe
Logik
Luxor
Sunkai
Tatung
Technics
Teleavia
Telefunken
0348
0041, 0081
0162, 0226
0041
0320, 0041, 0321,
0384
0067, 0320, 0041,
0321, 0384
0104, 0041
0045, 0043, 0081,
0041, 0384
0240
0081, 0195, 0106,
0240
0240
M Electronic
Manesth
Marantz
Matsui
Medion
Memorex
Metz
Thomson
Thorn
Toshiba
Minerva
Mitsubishi
Myryad
NEC
Neckermann
Nokia
Uher
Universum
Yoko
0106, 0240, 0104,
0041, 0046
Nordmende
0320, 0041, 0321,
0384
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
DVD player setup codes
CD and MD player setup codes
Maker
Setup codes
Maker
Setup codes
Maker
Setup codes
Tatung
Teac
0770, 0771
0759
0490
0825
0551, 0522
0503
0799
0690
0699
0686, 0696
0709
Afreey
Aiwa
Akai
Alba
Amoisonic
Amstrad
Apex Digital
Bush
0698
0641
0611
0717
0764
0713
0672
0516, 0690
0786, 0789
0788
0714, 0816
0716
0770
0770
0770
0490, 0634
0705
Kenwood
0028, 0190, 0626,
0523, 0858, 0692,
1490, 0036, 0037,
0338, 0339, 0340,
0677, 0859, 0681,
Technics
TerraTec
Thomson
Toshiba
Tredex
0826, 1059
Umax
Wesder
Wharfedale
Xwave
Cat
Setup codes for Kenwood components
with System Control connection
Clatronic
Cyber Home
Cytron
Daewoo
Dansai
Yamakawa
0665, 0710, 0765
Maker
Setup codes
CD
MD
Cassette deck
1338
1339
1340
DTV decoder setup codes
Decca
Denon
Maker
Setup codes
DiViDo
Enterprise
GoldStar
Goodmans
GPX
Grundig
Panasonic
Pioneer
Princeton
Samsung
Sensory Science
Sharp
0426
1120
1010
0113, 0295
1190
0591
0741
0790
0769
0717
0539, 0701, 0705,
0775
Greenhill
Grundig
1126
1010
H & B
0818
Harman/Kardon
Himage
HiMAX
Hitachi
Hiteker
JVC
0702
0518
0843
0664
Cassette deck setup codes
Maker
Setup codes
0672
Kenwood
0070, 0071, 0092,
0183, 0205, 0233,
0558, 0623
0490, 0534, 0737
0711
0234, 0251, 0386
Kenwood
Konka
LG
0741
Lasonic
Lecson
Lenco
Limit
Logic
0743
0696
0774
0768
Receiver setup codes
Maker
Setup codes
1570
Kenwood
0783
Mediencom
MiCo
Minato
Minowa
NAD
0746, 0773
0723, 0751
0752
0712
0692
Onkyo
Optim
0612, 0627, 1612
0747
Oritron
Panasonic
Philco
0651
0490
0690
Philips
Pioneer
REC
0539, 0646
0525, 0571
0689
Redstar
Revoy
0748, 0763
0699
Roadstar
Rotel
0689
0623
SM Electronic
Samsung
Sanyo
0690, 0730
0573, 0744
0670
Scheinder
Scott
0783
0718
Sherwood
Skyworth
Sony
0633
0766
0533, 1533
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
CASSETTE deck, CD player & MD recorder operations
You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, CD player or MD recorder
equipped with system control operations.
^
Cassette deck operations keys
CD player operation keys
DVD
TUNER
DVD
6CH
TUNER
VID3
6CH
CD
CD
DVD
VID1
VID1
VID2
DVD
VID3
AV AUX
AV AUX
MD
TAPE
MD
TAPE
VID2
PHONO
TV
PHONO
TV
we
POWER
POWER
SRC Power
(Source power)
RCVR
RCVR
o
w
SRC Power
4
5
4
5
(Source power)
3
6
8
3
6
8
Multi
Multi
Enter
Numeric keys
(Select tracks)
Enter
2
7
2
7
Multi
Multi
1
1
+100
(Select tracks)
0
RDS Disp.
9
PTY
0
9
+
10
+100
TV Mute
+
10
+100
TV Mute
RDS Disp.
Page
PTY
Disc sel.
Page
A/B
(Cassette Deck
selection)
Return
Exit
OSD
Guide
(Disc selection)
Return
Exit
OSD
Guide
Last
/A/B
Last
/A/B
Disc Skip
Menu
Disc Skip
Menu
Disc Sel.
Disc Sel.
Mute
Mute
Input Sel.
Input Sel.
Disc skip
¢
¢
+
CH
+
VOL
–
Tone
+
CH
+
VOL
–
¢(Skip up)
4(Skip down)
Tone
Sound
Sound
4
4
–
–
TV
Bass
Boost
Bass
Boost
TV
TV Input
+
TV Input
–
+
–
VOL
VOL
1(Search)
¡(Search)
Tune
–
Band
Tune
+
Tune
–
Band
Tune
+
1(Rewind)
¡(Fast Forward)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
¶
(Record)
(3Play)
8(Pause)
7(Stop)
Setup
Setup
Info/Flip
Info/Flip
Input
Mode
Input
Mode
Loudness
Loudness
3
/8
7(Stop)
3/8(Play/pause)
Active
EQ
Remote
Setup
Active
EQ
Remote
Setup
2(Reverse play)
Listen Mode
Listen Mode
DSP
Speaker
EQ
Speaker
EQ
DSP
Stereo
Stereo
Mode
Mode
REMOTE CONTROL UNIT RC-R0823
REMOTE CONTROL UNIT RC-R0823
MD recorder operation keys
DVD
6CH
TUNER
VID1
CD
DVD
VID3
AV AUX
MD
TAPE
VID2
PHONO
TV
POWER
RCVR
o
w
SRC Power
(Source power)
4
0
5
3
6
8
Multi
Enter
2
7
Numeric keys
(Select tracks)
Multi
1
+100
(Select tracks)
9
+
10
+100
TV Mute
RDS Disp.
PTY
Page
Return
Exit
OSD
Guide
Last
/A/B
Disc Skip
Menu
Disc Sel.
Mute
Input Sel.
¢
+
CH
+
VOL
–
Tone
¢(Skip up)
4(Skip down)
Sound
4
–
TV
Bass
Boost
TV Input
+
–
VOL
1 (Search)
¡ (Search)
Tune
–
Band
Tune
+
Dimmer
Auto
Top Menu
8
(Pause)
Setup
Info/Flip
Input
Mode
Loudness
¶(Record)
7(Stop)
3/8
(3Play)
Active
EQ
Remote
Setup
Listen Mode
DSP
Speaker
EQ
Stereo
Mode
REMOTE CONTROL UNIT RC-R0823
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Other components’ operations
Refer to the following for the type of remote control operations available for each component.
• When pressing keys in succession, press each key firmly and be sure
1 Select the input source.
to wait at least 1 second before pressing the next key.
• Numeric keys function the same as the numeric keys on the original
remote.
2 Press the keys corresponding to the operations you desire.
Refer to the following sections for details.
These keys can be used to perform the basic operations of KENWOOD and other manufacturers’ components which the setup code for each
component had been entered beforehand.
‡
TV operation keys
VCR operation keys
DVD
TUNER
DVD
6CH
TUNER
VID3
6CH
CD
CD
DVD
VID1
VID1
DVD
VID3
AV AUX
AV AUX
MD
TAPE
MD
TAPE
VID2
VID2
PHONO
TV
PHONO
TV
POWER
POWER
RCVR
RCVR
o
w
o
w
SRC Power
(Source power)
TV Power
4
5
4
5
%(Cursor up)
3
6
8
3
6
8
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Multi
Multi
%(Cursor up)
Numeric keys
Enter
Numeric keys
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Enter
Enter
2
7
2
7
Enter
Multi
Multi
1
1
0
RDS Disp.
9
PTY
0
9
PTY
Exit
Exit
Guide
Menu
+
10
+100
TV Mute
+
10
+100
TV Mute
RDS Disp.
Page
TV mute
Page
Return
Exit
OSD
Guide
Return
Exit
OSD
Guide
Input Sel.
Last
/
AB
Last
/AB
LAST
Disc Skip
Menu
Guide
Menu
Disc Skip
Menu
(Input selection)
Disc Sel.
Disc Sel.
Mute
Mute
(Last channel)
Last
Input Sel.
Input Sel.
¢
¢
+
CH
+
VOL
–
+
CH
+
VOL
–
(Last channel)
Tone
Tone
CH + / –
CH + / –
Sound
Sound
(Channel + / –)
(Channel + / –)
4
4
–
–
TV Input
TV
VOL
Bass
Boost
TV
VOL
Bass
Boost
TV Input
TV Input
+
+
–
–
Tune
TV VOL
–
Band
Tune
+
Tune
–
Band
Tune
+
1(Rewind)
¡(Fast Forward)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
¶
(Record)
(3Play)
(Display)
Setup
Setup
Info/Flip
Info/Flip
Input
Mode
Input
Mode
Loudness
Loudness
8(Pause)
7(Stop)
3
2
/8
2(Display)
Active
EQ
Remote
Setup
Active
EQ
Remote
Setup
Listen Mode
Listen Mode
DSP
Speaker
EQ
DSP
Mode
Speaker
EQ
Stereo
Stereo
Mode
REMOTE CONTROL UNIT RC-R0823
REMOTE CONTROL UNIT RC-R0823
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Satellite operation keys
Cable operation keys
DVD
TUNER
DVD
6CH
TUNER
VID3
6CH
CD
CD
DVD
VID1
VID1
DVD
VID3
AV AUX
AV AUX
MD
TAPE
MD
TAPE
VID2
VID2
PHONO
TV
we
PHONO
TV
POWER
POWER
RCVR
RCVR
o
o
w
SRC Power
SRC Power
%(Cursor up)
(Source power)
4
5
(Source power)
4
5
%(Cursor up)
3
6
8
3
6
8
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Multi
Multi
fi(Cursor down)
@(Cursor left)
#(Cursor right)
Enter
Numeric Keys
Enter
Enter
2
7
2
7
Numeric keys
Enter
Multi
Multi
1
1
Page ∞/5
0
9
PTY
0
9
PTY
Exit
Guide
Menu
+
10
+100
TV Mute
+
10
+100
TV Mute
(Page down or up)
RDS Disp.
RDS Disp.
Page
Guide
Menu
Last
Page
Return
Exit
OSD
Guide
Return
Exit
OSD
Guide
Exit
(Last channel)
Last
/
AB
Last
/AB
Disc Skip
Menu
Disc Skip
Menu
Disc Sel.
Disc Sel.
Mute
Mute
Last
Input Sel.
Input Sel.
Input Sel.
(Input selection)
¢
Input Sel.
¢
+
CH
+
VOL
–
+
CH
+
VOL
–
(Last channel)
Tone
Tone
(Input selection)
Sound
Sound
4
4
–
–
CH + / –
Bass
Boost
Bass
Boost
TV
TV
TV Input
TV Input
+
+
–
CH + / –
–
Tune
VOL
VOL
Tune
–
Band
Tune
+
–
Band
Tune
+
(Channel + / –)
(Channel + / –)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
Setup
Setup
Info/Flip
Info/Flip
Input
Mode
Input
Mode
Loudness
Loudness
Info
Active
EQ
Remote
Setup
Active
EQ
Remote
Setup
(Information)
Info
Listen Mode
Listen Mode
(Information)
DSP
Speaker
EQ
DSP
Mode
Speaker
EQ
Stereo
Stereo
Mode
REMOTE CONTROL UNIT RC-R0823
REMOTE CONTROL UNIT RC-R0823
DVD player operation keys
DVD
6CH
TUNER
VID3
CD
VID1
VID2
DVD
AV AUX
MD
TAPE
PHONO
TV
we
POWER
RCVR
o
SRC Power
(Source power)
4
5
%(Cursor up)
3
6
8
Numeric keys
Multi
fi(Cursor down)
@(Cursor left)
#(Cursor right)
(Select tracks)
Enter
2
7
Enter
Multi
1
Page ∞/5
0
9
PTY
+
10
+100
TV Mute
(Page down or up)
+ 100
RDS Disp.
Page
Return
Exit
OSD
Guide
OSD (On Screen Display)
Menu
Disc Skip
Return
Last
/AB
Disc Skip
Menu
Disc Sel.
Mute
Disc Sel.
Input Sel.
(Disc selection)
¢
+
CH
+
VOL
–
Tone
Sound
1(Search)
¡(Search)
4
¢Skip up
4Skip down
–
TV
Bass
Boost
TV Input
+
–
VOL
Tune
–
Band
Tune
+
Dimmer
Auto
Top Menu
Top Menu
8(Pause)
7(Stop)
Setup
Info/Flip
(Title)
Input
Mode
Loudness
Active
EQ
Remote
Setup
3
/8
(3Play)
Listen Mode
DSP
Speaker
EQ
Stereo
Mode
REMOTE CONTROL UNIT RC-R0823
Notes
1. Certain codes may only operate some of the function available on a given model.
2. The above show the typical type functions available for each component. Some manufacturers use different key combinations to perform similar
functions. For that reason, we have programmed extra functions on some of the unused number keys to help you control your equipment.
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
With the power cord plugged in, turn the POWER ON/OFF
key OFF. Then, while holding down the ON/STANDBY
key, press POWER ON/OFF.
•Pleasenotethatresettingthemicrocomputerwillclearthecontents
of the memory and returns the unit to the state it was in when it left
the factory.
Amplifier
Symptom
Cause
Remedy
No sound from the speakers.
• The speaker cords are disconnected.
• Connect them properly referring to
“Connecting the speakers”
• Adjust the volume to a proper level.
• Turn OFF the MUTE.
$
• VOLUME is set to the minimum position.
• MUTE is ON.
• The SPEAKERS switches are set to OFF.
¡
)
• Set the SPEAKERS switches to ON.
The standby indicator blinks and sound is • Speaker cords are short-circuited.
not output.
• Turn the power off, eliminate the short-
circuiting, then turn on the power again.
Soundisnotoutputfromoneofthespeakers. • The speaker cord is disconnected.
• Connect it properly referring to “Connecting
the speakers”.
$
Sound is not output from the surround • The surround speaker cords and/or the center • Connect it properly referring to “Connecting
speakers and / or the center speaker, or their
sound is very small.
speaker cord is disconnected.
• A surround mode has not been engaged.
• The surround and/or center volume controls • Adjust the speaker levels using the test tone.
are set to the minimum level.
the speakers”.
• Select a surround mode.
$
*
A humming noise is generated when the • The audio cord from the record player is not • Insert the audio cord plugs securely into the
PHONO input selector is selected.
connected to the PHONO jacks.
• The record player is not grounded.
PHONO jacks.
• Connect the grounding wire to the GND
terminal on the rear panel.
When playing a Dolby Digital source signal • There are many possible causes for this • Set the input mode to digital manual before
using a DVD player, the sound is cut off soon
after it starts.
problem, depending on the type of DVD player
used.
starting playback of the Dolby Digital source.
8
No sound is produced during playback from • The input mode is set to digital manual.
a DVD player.
• Press the INPUT MODE key to select to full
auto mode.
8
A video source cannot be recorded
normally.
• The software is copy-guarded.
• Copy-guarded video software cannot be
recorded.
Tuner
Symptom
Cause
Remedy
Radio stations cannot be received.
• No antenna is connected.
• The broadcast band is not set properly.
• Connect an antenna.
• Set the broadcast band properly.
%
• The frequency of the desired station is not • Tune the frequency of the desired station.
tuned.
¢
Interference.
• Noiseduetoignitionnoisefromanautomobile. • Install the outdoor antenna away from the
• Noise due to interference from an electric
road.
appliance.
• Turn off the power to the appliance.
• Noise due to a nearby TV set.
• Install the receiver farther away from the TV.
A station which was preset cannot be • The preset station belongs to a frequency that • Preset a station with a receivable frequency.
received by pressing the corresponding
numeric key.
cannot be received.
• The preset memory was cleared because the • Preset the station again.
power cord had been unplugged for a long
period of time.
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Remote control unit
Symptom
Cause
Remedy
Certain inputs cannot be selected using the
remote control.
• No setup codes registered for the respective • Registerasetupcodeattherespectiveinput(s).
input(s).
‡
Remote control operation is not possible.
• Theremotecontrolissettoadifferentoperation • Press any of the Input Selector keys to select
mode.
the appropriate operation mode.
• Batteries are exhausted.
• Replace with new batteries.
• The remote control unit is too far away from • Operate the remote control unit within the
the main system, controlling angle is too large,
or there is an obstacle between the receiver
and the remote.
controllable range.
• The audio cords and system control cords are • Connect properly referring to “Setting up the
not connected properly. system”.
• No tape or CD is placed in the source • Place the tape or CD in the source component
component. which you want to play.
• An attempt is made to play a tape which is • Wait until recording has completed.
being recorded in the cassette deck.
• The remote control has not been set to the • Press any of the source keys or SRC Power
operation mode for the component you wish
to control.
key to activate the operation mode for the
component you want to control before
operation.
fl
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure safe
operation.
Specifications
AUDIO section
VIDEO section
Rated power output during STEREO operation
VIDEO inputs / outputs
DIN/IEC (63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω) .........................
.............................................................................. 100 W + 100 W
Effective power output during SURROUND operation
VIDEO (composite) ................................................. 1 Vp-p / 75 Ω
S VIDEO inputs /outputs
S VIDEO (luminance signal)................................... 1 Vp-p / 75 Ω
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω
FRONT (63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6Ω one channel driven)
............................................................................... 100 W + 100 W
CENTER (63Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel
driven) .................................................................................. 100 W
SURROUND (63Hz ~ 12.5 kHz, 0.7 % T.H.D. at 6 Ω one channel
driven) ................................................................... 100 W + 100 W
Total harmonic distortion .......................0.009 % (1 kHz, 50 W, 6 Ω)
Frequency response
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB
PHONO ‘RIAA’ response ..............40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB
Maximum input level
PHONO (MM) ....................................45 mV, 1 % T.H.D. at 1 kHz
Signal to noise ratio (IHF’66)
PHONO (MM) ........................................................................ 75 dB
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
............................................................................................... 95 dB
Loudness control
FM tuner section
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity
MONO .................. 1.3 µV (75 Ω)/ 13.2 dBf (40 kHz dev, S/N 26 dB)
STEREO ........... 45 µV (75 Ω)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)
Total harmonic distortion
MONO (1 kHz, 40 kHz dev) ....................... 0.2% (65.2 dBf input)
STEREO (1 kHz, 40 + 6 kHz dev)............... 0.8% (65.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO........................................................ 65 dB (65.2 dBf input)
STEREO ..................................................... 60 dB (65.2 dBf input)
Stereo separation (1 kHz) ........................................................... 36 dB
Selectivity (DIN 300 kHz) .......................................................... 64 dB
Frequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dB
VOLUME at –30 dB level ...................................... +6 dB (100 Hz)
Input sensitivity / impedance
PHONO (MM) ........................................................ 6.0 mV / 47 kΩ
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
.............................................................................. 500 mV / 47 kΩ
Output level / impedance
TAPE REC ............................................................... 500 mV / 1 kΩ
PRE OUT (SURROUND BACK CHANNEL) ..................1 V / 1 kΩ
PRE OUT (SUBWOOFER) .............................................1 V / 1 kΩ
Tone control
AM tuner section
Tuning frequency range.................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) .........16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz) ............................................
.................................................................. 50 dB (60 dBµV EMF input)
GENERAL
Power consumption .................................................................. 330 W
AC outlet
SWITCHED ........................................................ (total 90 W max.)
Dimensions..................................................... W : 440 mm(17-5/16")
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
H
D
: 159 mm (6-1/4")
: 392 mm(15-7/16")
Weight (Net) .............................................................. 9.8 kg (20.6 lb)
DIGITAL AUDIO section
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical ........................... (–15 dBm ~ –24 dBm), 660 nm 30 nm
Coaxial................................................................... 0.5 Vp-p / 75 Ω
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model__________________ Serial Number________________________
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
|