DNX891HD
DNX7710BT
DNX771HD
DNX691HD
DNX571HD
DNX571EX
DNX5710BT
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
Check the latest edition
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/ DNX571EX Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
IM382_Ref_K_En_00 (K/K2/R)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Lens fogging
2 WARNING
When you turn on the car heater in cold
weather, dew or condensation may form
on the lens in the disc player of the unit.
Called lens fogging, this condensation on
the lens may not allow discs to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still
does not operate normally after a while,
consult your Kenwood dealer.
To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any
extended period.
Precautions on handling discs
• If you experience problems during
installation, consult your Kenwood dealer.
• Do not touch the recording surface of the
disc.
Precautions on using this unit
• Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull
them out horizontally.
• You can select language to display menus,
audio file tags, etc. See Language setup
• If the disc center hole or outside rim has
burrs, use the disc only after removing the
burrs with a ballpoint pen etc.
• The Radio Data System or Radio Broadcast
Data System feature won’t work where
the service is not supported by any
broadcasting station.
• Discs that are not round cannot be used.
Protecting the monitor
To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with the sharp tip.
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording
surface or discs that are dirty cannot be
used.
Cleaning the unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe it again with a clean soft
dry cloth.
• This unit can only play the CDs with
.
This unit may not correctly play discs which
do not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see
your writing software, and your recorder
instruction manual.)
¤
• Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erase screened print.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Read this Manual
Link header
You can refer each section or top page
with one-click.
Return to the Top page
CD, Disc, iPod, USB device
Operation title
Introduces the function.
Search Operation
You can search the music, video, or picture
file by some operations.
NOTE
NOTE
Introduces some tips, notes, etc.
• If you use a remote controller, you can jump
directly to the desired track/file with entering the
track/folder/file number, play time, etc. For details,
see “Direct search mode” (p.81).
Reference mark
Displayed in blue notes.
With one-click, you can jump to the
article related to the current section.
List search
You can search tracks, folders, and files
according to hierarchy.
For USB devices and iPods, you can list and
search files in the device by using playlist.
Operation procedure
Explains necessary procedures to
achieve the operation.
Press the <MENU> button during
playback.
Simple Control screen appears.
1
<
>: Indicates the name of panel
buttons.
]: Indicates the name of touch
keys.
Touch [
List Control screen appears.
].
2
3
[
Touch desired track/file.
Screen shot
Shows some screen shots displayed during
operation for reference.
The area or keys to touch are surrounded
with a red frame.
Playback starts.
Other search
When you want to narrow the list down,
there are other search ways.
Press the <MENU> button during
playback.
1
Simple Control screen appears.
Touch [
].
2
The search type screen appears.
NOTE
• The screens and panels shown in this
manual are examples used to provide clear
explanations of the operations.
For this reason, they may be different from the
actual screens or panels used, or some display
patterns may be different.
27
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Functions of the Buttons on the Front Panel
DNX891HD/ DNX7710BT/ DNX771HD
8
9
1
2
3
4
5
6
7
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX891HD:
DNX7710BT, DNX771HD:
If above icon is showed, read the article applicable to the unit you use.
How to insert an SD Card
7
1) Press <0> button for 1 second.
Labelled
side
The panel fully opens.
2) Hold the SD card as the illustration in the right
and insert it into the slot until it clicks.
●To eject the card:
Push the card until it clicks and then remove your finger
from the card.
0
The card pops up so that you can pull it out with your
fingers.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
Name
Motion
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit
1
∞, 5 (Vol)
• Adjusts volume.
2
NAV
• Displays the navigation screen.
3
• Pressing for 1 second switches AV out sources.
AUD
4
• Pressing for 1 second switches camera view display on/off.
MENU
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
5
TEL
6
• Pressing for 1 second displays the Voice Recognition screen. (P.88)
0 (Eject)
• Ejects the disc.
7
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
Disc insert
slot
• A slot to insert a disc media.
8
SD card slot
An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
9
* The display may not switch to the Graphic Equalizer screen in some conditions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX691HD/DNX571HD/DNX5710BT/DNX571EX
3
2
1
4
5
6
7
8
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX691HD:
DNX571HD, DNX571EX, DNX5710BT:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
8
1) Open the microSD card slot cover
as the illustration in the right.
2) Hold the microSD card with the label
facing up and the notched section right,
and insert it into the slot until it clicks.
●To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
Name
Motion
Disc insert
slot
• A slot to insert a disc media.
• Ejects the disc.
1
0 (Eject)
2
• Pressing for 1 second ejects the disc forcibly.
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit
3
MENU
NAV
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
4
• Displays the navigation screen.
5
• Pressing for 1 second switches AV out sources.
Volume Knob • Turning adjusts volume up or down.
• Pressing switches attenuation of the volume on/off.
6
TEL
7
• Pressing for 1 second displays the Voice Recognition screen. (P.88)
microSD
card slot
• A microSD card slot for upgrading the map. For how to upgrade the
map, refer to the instruction manual of the navigation system.
8
* The display may not switch to the Graphic Equalizer screen in some conditions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on the Unit
The method of turning on is different depending on the model.
Press the <MENU> button.
1
The unit is turned on.
● To turn off the unit:
Press the <MENU> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial setup
Set each item as follows.
1
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline unit are set.
After setting, touch [Enter].
1Touch [SET].
2Select the desired country.
3Touch [Enter].
Language
Select the language used for the control screen and setting items. Default is“American English (en)”.
1Touch [SET].
2Touch [2] or [3] to select the desired language.
3Touch [Enter].
Angle
Adjust the position of the monitor. Default is“0”.
1Touch [SET].
2Touch desired angle number and [6].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1Touch [SET].
2Touch [ON] or [OFF] of [Panel Color Scan].
3If you want to change color, touch [SET] of [Panel Color Coordinate].
4Touch your desired color and [6].
Continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
EXT SW (DNX891HD, DNX7710BT only)
Control the external devices.
1Touch [SET].
2Set device name, output pattern, and pulse set for each device. Then, touch [6].
Camera
Set the parameters for the camera.
1Touch [SET].
2Set each item and touch [
].
OEM SETUP (North America Sales area only)
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
Touch [Finish].
2
NOTE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
● To eject the disc:
Press the <0> button.
How to Play Media
Music CD and disc media
Press the <0> button.
1
USB device
Connect the USB device with the
USB cable.
1
The panel opens.
Insert the disc into the slot.
2
The unit reads the device and playback
starts.
● To disconnect the device:
Touch [0] on the screen and disconnect
the device from the cable.
iPod
The panel closes automatically.
The unit loads the disc and playback
starts.
Connect the iPod.
1
The unit reads the iPod and playback
starts.
● To eject the disc:
Press the <0> button.
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
Insert the disc into the slot.
1
● To disconnect the iPod/iPhone
connected with the cable:
Touch [
] on the screen and then touch
[0]. Disconnect the iPod from the cable.
The unit loads the disc and playback
starts.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Top Menu Screen
Most functions can be performed from the Top Menu screen.
Touch [Menu] on any screen.
1
NOTE
• If [Menu] is not
displayed during
video/picture
playback, press the
<MENU> button.
Top Menu screen appears.
NOTE
• Top Menu screen can
be changed by flicking
left or right.
Customizing mode screen
● Customizing Top Menu screen
You can arrange the position of the
source icons as you like.
1. Touch and hold the icon which
you want to move to go into the
customizing mode.
2. Drag it where you want to move.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
From this screen, you can perform the following functions.
Function
Icon
Operation
Switch the audio source
Touch the icon of the
desired source.
etc.
Switch the video source
Touch the icon of the
desired video source.
etc.
Switch the application
installed in the iPhone/
iPod or Android.
Touch the icon of the
desired application.
Switch the Apps source
Touch the icon of the
desired App source.
Enter setup mode
Touch the icon of the
desired setup function.
etc.
Display navigation
screen
Touch [NAV] or
navigation information.
or
Turn off all audio
function
Touch [STANDBY].
Vehicle information
display
Touch [OEM Features].
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
Introduces the common operations.
General
There are some functions which can be operated from most screens.
[Menu] (Screen control)
Returns to the Top Menu screen.
Touching for at least 1 second displays the
Screen Control screen. (Even when an image
is displayed, touching for at least 1 second
displays the Screen Control screen.)
(RETURN)
Returns to previous screen.
(common menu key)
Touch to display the common menu. The
contents of the menu are as follows.
: Displays the EXT SW Control screen.
(DNX891HD, DNX7710BT only)
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu
screen.
: Displays the control screen of current
source. Icon feature differs depending
on the source.
: Closes the menu.
List screen
There are some common function keys in the list screens of most sources.
(Scroll)
Scrolls the displayed text.
etc.
Touch keys with various functions are
displayed here.
Displayed keys differ depending on the
current audio source, status, etc.
For examples of functions of each key, refer
to the table below.
Key
Function
Lists all the music in the lower hierarchy.
Moves to the upper hierarchy.
Displays current category folder.
Displays music/picture/movie file list.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Flick scrolling
You can scroll the list screen by flicking the screen up/down or right/left.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation Operation
For details on the navigation function, please refer to the Navigation Instruction Manual.
Display the navigation screen
Press the <NAV> button.
1
The navigation screen appears.
Control audio from the navigation screen
You can control audio sources while the navigation screen is displayed.
Also, you can view the navigation information while the source control screen is displayed.
Touch the information bar.
1
The navigation screen with audio information appears.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch [
] or [
] in the navigation screen.
2
Touching this area displays
the audio screen.
: Displays the navigation and control
keys of the current source.
: Displays the navigation and current
video/picture playback display.
NOTE
• The screen switches between playback screen
and camera view each time the viewing area is
touched.
• Touching the source icon in the bottom of the
screen displays the full audio screen.
● To return to the full navigation screen:
Touch [
].
NOTE
• For details on control keys, refer to the instructions in each section.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OEM Features Operation
By connecting this unit to the bus system of the vehicle using an iDataLink (commercially
available), this unit can access the satellite radio source provided for the vehicle and vehicle
information can be displayed on this unit.
Touch [Menu] on any screen.
Top Menu screen appears.
1
Touch [OEM Features] in the Top Menu screen.
OEM Features screen appears.
2
: Displays the control screen of the
media player source provided for the
vehicle.
: Displays the control screen of the
satellite radio source provided for the
vehicle.
: Displays the control screen of the
Bluetooth Hands Free function
provided for the vehicle.
: Displays the control screen of the
Bluetooth streaming source provided
for the vehicle.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
: Displays information about the air
conditioner of the vehicle.
: Displays information about the
instruments such as a speedometer.
: Displays information about the tire
pressures of the vehicle.
: Displays information about the
Parking Distance Sensor of the vehicle.
NOTE
• Displayable screens, button names, and screen names vary depending on the type of the connected iDataLink
and the model of the vehicle. For more details, access the following URL:
www.idatalink.com/
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/Video CD (VCD) Operation
DVD/VCD Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode
• The screen shot below is for DVD. It may be different from the one for VCD.
Control screen
Video screen
1
6
6
5
2
3
4
7
8
1 Information display
Displays the following information.
• Title #, Chap #: DVD title and chapter number display
• Track #/Scene #: VCD track or scene number display
Scene # is displayed only when Playback control (PBC) is on.
• 3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast backward),
R
¢ (search up), 4 (search down), 7 (stop), (resume stop), 8 (pause),
(slow playback),
(slow reverse playback).
Touch this area to display the disc lable name.
2 Multi function key
3 Multi function menu
Various functions can be performed by using keys in this area. For details on the keys, see Multi
4 Control switching key
Unavailable in DVD/VCD source.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Sub function menu
The following functions can be performed by using keys in this area.
• Repeats the current content: Touch [
following sequence;
DVD: "title repeat"
]. Each time you touch the key, repeat mode switches in the
, "chapter repeat"
, "function off"
VCD (PBC On): Does not repeat
VCD (PBC Off): "track repeat"
, "function off"
• Hides all keys: Touch [
].
• Fast forward or fast backward: Touch [1] or [¡]. Each time you touch the key, the speed
changes; standard, 2 times, 3 times.
• Confirms play time: See #:##:##.
DVD: You can switch the time display between title play time, chapter play
time, and title remaining time. Each time you touch, the display switches
between“T #:##:##”(title play time display), “C #:##:##”(chapter play time
display), and“R #:##:##”(title remaining time display).
As well as the time display, the bar indicating current location appears.
VCD (PBC off): You can also confirm disc remaining time by touching time
display. Each time you touch, the display switches between“P
##:##”(play time display) and“R ##:##”(disc remaining time).
• Confirms the current location: See the bar in center (DVD only). The bar does not appear when the
time display is remaining time display.
6 Searching area
Touch to search the next/previous content.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
7 Menu display area
This area functions differently depending on the current status.
• During DVD playback: Displays the DVD menu. During the menu display, displays the highlight
control screen.
8 Key display area
Touch to display the last control screen.
NOTE
• If you use a remote control, you can jump directly to the desired image with entering the chapter number, scene
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
DVD
VCD
The functions of each key are as follows.
[4] [¢]
Searches the previous/next content.
[38]
Plays or pauses.
[
] or [ ] (DVD only)
Plays in slow motion forward or backward.
[7]
Stops playback. When touched twice, the disc is played from the beginning when you play it the next
time.
[PBC] (VCD only)
Turn Playback control (PBC) on or off.
[
SETUP]
AUDIO]
EXT SW] (DNX891HD, DNX7710BT only)
Touch to control the external device power supply. For details, see External Device Control (P.104).
[ REAR
Touch to mute the rear speaker.
[
[
]
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Highlight control
DVD Disc Menu Operation
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
You can set up some items in the DVD-VIDEO
disc menu.
1 Touch illustrated area during playback.
1 Touch [Highlight] in the Menu Control
screen.
2 Touch desired item on the screen.
Menu Control screen appears.
2 Perform desired operation as follows.
NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.
Displays the top menu
Touch [Top].*
Displays the menu
Touch [Menu].*
Displays the previous menu
Touch [Return].*
Enters selected item
Touch [Enter].
Enables direct operation
Touch [Highlight] to enter the highlight control
Moves the cursor
Touch [5], [∞], [2], [3].
* These keys may not function depending on
the disc.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD play mode setting
Zoom Control For DVD And VCD
You can select DVD play mode.
You can enlarge Playback screen for DVD and
VCD.
1 Touch [Next] in the Menu Control
screen.
1 For VCD, touch illustrated area during
playback.
Menu Control 2 screen appears.
Zoom Control screen appears.
2 Touch the key which corresponds to
desired setting item.
NOTE
(P.26) to display the Zoom Control screen.
2 Perform desired operation as follows.
Switches the subtitle language
Touch [Subtitle]. Each time you touch this key,
language is switched.
Switches the audio language
Touch [Audio]. Each time you touch this key,
language is switched.
Switches zoom ratio
Touch [Zoom].
For DVD, changes the zoom ratio at 4 levels;
Off, 2 times, 3 times, 4 times.
For VCD, changes the zoom ratio at 2 levels;
Off, 2 times.
Controls zoom ratio
Switches the picture angle
Touch [Angle]. Each time you touch this key,
picture angle is switched.
Scrolls the screen
Touch [5], [∞], [2], or [3] to scroll the screen
in the direction you touch.
Exits menu control
Touch [Exit].
Exits menu control
Touch [Exit].
Displays the Menu Control 1 screen
Touch [Previous].
Displays the previous menu*
Touch [Return].
26
Download from Www.Somanuals.com. All Manuals Search And Download.
* This function may not be performed
depending on the disc.
NOTE
• You cannot touch the menu keys directly on the
screen when zooming.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup
You can set up the DVD playback functions.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
• Some setup items can only be set in standby
mode.
1 Touch [
] in the control screen.
Multi function menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Menu/Subtitle/Audio Language*
Dynamic Range Control*
Sets the dynamic range.
Wide: The dynamic range is wide.
Normal: The dynamic range is normal.
Dialog (Default): Makes the total sound
volume larger than other
modes. This is effective only
when you are using Dolby
Digital software.
Source SETUP Menu screen appears.
4 Touch [DVD SETUP] in the list.
DVD SETUP screen appears.
Angle Mark
5 Set each item as follows.
Sets an angle mark display.
ON (Default): An angle mark appears.
OFF: An angle mark does not appear.
Screen Ratio*
Sets the screen display mode.
16:9 (Default): Displays wide pictures.
4:3 LB: Displays wide pictures in the Letter Box
format (having black stripes at the top
and bottom of screen).
4:3 PS: Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
Parental Level*
DISC SETUP
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream Information
Displays the present source information.
Language setup
This setting is for the language used in the
menu, subtitle, and voice. You cannot setup
these items during DVD playback.
The stream (Dolby Digital, Linear PCM, MPEG,
WMA or AAC) appears.
1 Touch [SET] of the desired item;
[Menu Language], [Subtitle Language],
[Audio Language].
* These items are disabled when a DVD is
inserted.
Language Set screen appears.
2 Enter the desired language code and
touch [Enter].
For language code, refer to DVD Language
Sets the entered language and returns to
the DVD SETUP screen.
NOTE
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• To set the DVD’s original language for audio
language, touch [Original].
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental level
Disc setup
Sets a parental level. You cannot setup this
item during DVD playback.
Performs setup when using disc media.
1 Touch [SET] of [DISC SETUP].
1 Touch [SET] of [Parental Level].
DISC SETUP screen appears.
Parental Pass screen appears.
2 Select an option as follows.
2 Enter the parental code and touch
[Enter].
Parental Level screen appears.
NOTE
• The parental code is set to“0000”as default.
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• Current parental level appears as [Level#].
CD Read
3 Touch [2] or [3] to select a parental
Sets the motion of this unit when a music CD
is played.
level.
1 (Default): Automatically recognizes and plays
back an audio file disc, a DVD or a music
CD.
2: Forcibly plays back a disc as a music CD.
Select [2] if you wish to play a music CD
having a special format or if you cannot
play a disc in [1] position.
On Screen DVD
Sets an on-screen display.
Auto: When updated, information appears for
5 seconds.
NOTE
OFF (Default): Information does not appear.
• If a disc has higher parental lock level, you need
to enter the code number.
• The parental lock level varies depending on a
loaded disc.
NOTE
• [CD Read] is not available when a disc is in the
• If a disc has no parental lock, anybody can play it
back even when you have set the parental lock.
unit.
• You cannot play an audio file/VCD disc in the [2]
position. Also, you may not play some music CDs
in the [2] position.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/Audio and Visual Files/iPod/App Operation
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
• To connect the Android device with this unit, the cable (sold separately) and the profile which your Android
device supports are necessary as follows:
• To listen to music and watch video of APPS source
−MHL device
−KCA-MH100
−Bluetooth profile: SPP
• To listen to music of APPS source
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
• To listen to music of Bluetooth Audio source
−Bluetooth profile: A2DP
−Bluetooth profile: AVRCP
• To connect the iPod/iPhone with this unit, the cable, adapter (both sold separately), and the profile which your
iPod/iPhone supports are necessary as follows:
• To listen music and watch video with Lightning connector device
−Lightning Digital AV Adapter
−KCA-HD100
−Lightning to USB Cable (accessory of the iPod/iPhone)
−Bluetooth profile: SPP
• To listen music with Lightning connector device
−Lightning to USB Cable (accessory of the iPod/iPhone)
• To listen music and watch video with 30-pin connector device (1)
−Apple 30-pin Digital AV Adapter
−KCA-HD100
−KCA-iP102
−Bluetooth profile: SPP
• To listen music and watch video with 30-pin connector device (2)
−KCA-iP202
• To listen music with 30-pin connector device
−KCA-iP102
• To listen to music via Bluetooth
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
When connecting with Lightning Digital AV Adapter or Apple 30-pin Digital AV Adapter some applications can be
controlled from this unit. The operable functions depend on the application.
• Do not leave the cable or the adapter made by other makers inside the car. It might lead the malfunction caused
by heat.
• Some settings are necessary to meet the connected iPod/iPhone or Android device. Refer to iPod/iPhone
See the following sections for each source operation.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Music CD and disc media
NOTE
• In this manual, “Music CD”will be referred to as the general CDs which include music tracks in.
“Disc media”will be referred to as CD/DVD disc which includes audio, picture or video files.
• The screen shot below is for CD. It may be different from the one for disc media.
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 Information display
Displays the following information.
• Track #: Each time you touch this area, display switches between current track number, text, etc.
• 3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast
R
backward), ¢ (search up), 4 (search down), 7 (stop), (resume stop), 8
(pause).
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Multi function menu
Various functions can be performed by using keys in this area. For details on the menu, see Multi
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Track information
Displays the information of the current track.
For music CD and disc media, you can switch the current track information and the current folder list by
touching the list switching key (8 in this table).
However, only "No Information" is displayed for music CD.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
8 List switching key
Touch to switch between the track list and the CD-TEXT display (CD)/ID3 tag information (disc media
only).
Video screen (disc media only)
9
9
10 11
9 Searching file area (disc media only)
Touch to search the next/previous file.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
10 Menu display area (disc media only)
11 Key display area (disc media only)
Touch to display the last control screen.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device and iPod
NOTE
• The screen shot below is for USB device. It may be different from the one for iPod.
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 Information display
Displays the following information.
• Current file name: Each time you touch this area, display switches between file number/folder
number and file name.
• 3, ¡, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play, searching), 8 (pause), ¡ (forward
manual search), 1 (reverse manual search).
2 Artwork/Control switching area
The picture data is displayed if available from the current file. When the picture is not available, “No
Photo”is displayed.
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Multi function menu
Various functions can be performed by using keys in this area. For details on the keys, see Multi
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Contents list
Displays the list and contents. The contents of the list differ depending on the playback status and
source.
When you select the video source on the device connected with the Lightning connecter, the source is
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
8 List switching key
Touch to switch between the file list and the current file information.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture/video screen
9
9
10
9 Searching file area (picture/video file only)
• Touch to search the next/previous file.
• During slide show in USB mode, touching each area searches the next/previous music file.
• Scrolling from center of display to left or right performs fast backward or fast forward. To stop fast
backward/forward, touch center of the display. This function is not available when there is no music
file in the current folder.
10 Key display area (picture/video file only)
Touch to display the last control screen.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
Music CD
Disc media
USB device
iPod
The following functions can be performed by using keys in this area.
] (Disc media, iPod, USB device only)
[
[4] [¢]
Searches the previous/next track/file.
[3] [8] / [38]
Plays or pauses.
[7] (music CD and disc media only)
Stops playback.
[0] (iPod and USB device only)
[
] [
Searches previous/next folder.
] (picture files in USB device only)
During picture playback, switches to picture display.
SETUP]
AUDIO]
EXT SW] (DNX891HD, DNX7710BT only)
Touch to control the external device power supply. For details, see External Device Control (P.104).
[ REAR
Touch to mute the rear speaker.
] (disc media and USB device only)
[
[
[
[
]
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Sub function menu
Music CD
Disc media
USB device
iPod
The following functions can be performed by using keys in this area.
[
]
Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following
sequence;
CD: "track repeat"
, "repeat off"
iPod: "song repeat"
, "all songs repeat"
, "repeat off"
Disc media, USB device: "file repeat"
, "folder repeat"
, "repeat off"
[
] (USB device and iPod only)
Searches track from the album artwork list. For details on search operation, see Search from album
[
] (During video file playback only)
Hides all keys.
[1] [¡] (Music CD and disc media only)
Fast forward or fast backward.
[
] [
] (USB device and iPod only)
#:##:## or ##:##
Confirms play time.
During music CD playback, you can also confirm disc remaining time by touching time display.
Each time you touch, the display switches between“P ##:##”(track play time display) and“R ##:##”(disc
remaining time).
[
]
Randomly plays all tracks in current folder/disc or in current playlist in the connected iPod.
Each time you touch the key, random mode switches in the following sequence;
CD: "track random"
Disc media, USB device: "file random"
iPod: "track random" , "album random"
, "random off"
, "random off"
, "random off"
Status bar in center (USB device and iPod only)
Confirms the current location.
During USB device and iPod playback, you can drag the circle left or right to change the playing
position.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Other search
Search Operation
When you want to narrow the list down,
there are other search ways.
You can search music, video or picture files
by the following operations.
This function is not available when music CD
is the current source.
NOTE
• If you use a remote control, you can jump directly
to the desired track/file with entering the track/
folder/file number, play time, etc. For details, see
1 Touch [
] in the control screen.
The search type screen appears.
2 Touch desired search way.
USB device
List search
You can search tracks, folders, and files
according to hierarchy.
1 Touch illustrated area.
iPod
List Control screen appears.
2 Touch desired track/file.
The list sorted in the way you selected
appears.
See the following sections for each
operation.
• [Category List]: You can search a file by
• [Link Search]: You can search a file of
same artist/album/genre/composer as the
Playback starts.
NOTE
• For disc media, you can switch the file list and
• [Folder List]: You can search a file according
folder list by touching [
].
• For disc media, you cannot display the list during
random play and stop.
• [Thumbnail Viewer]: You can search a
NOTE
• For disc media, you can display the folder list
directly by touching [
].
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Category search (USB device and iPod
only)
Link search (USB device and iPod only)
1 Touch the desired item from the left
part of the screen. You can select from
artist, album, genre and composer.
1 Touch the desired category from the
left part of the screen.
The list corresponding to your selection
appears.
2 The list is sorted by selected category.
3 Touch desired item.
NOTE
Playback starts.
• The list is sorted by the way you selected.
• artist: Displays the album list of the artist.
NOTE
• To narrow the search you can select a letter from
• album: Displays all tunes of the current album.
the alphabet list in the center of the display.
• genre: Displays the artists list in which artists
belong to the same genre.
• composer: Displays the album list of the
composer of the current file.
2 Touch to select desired item in the
list. Repeat this step until you find the
desired file.
NOTE
• To narrow the search you can select a letter from
the alphabet list in the center of the display.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder search (USB device and disc
media only)
Picture search (USB device only)
1 Touch the desired picture.
1 Touch the desired folder.
The selected picture appears in full screen.
See number 9-10 in USB device and iPod
(P.35) for operation of picture screen.
Folders in the selected source are displayed
in the center.
When you touch a folder its contents are
displayed.
The hierarchy till the current folder is
displayed on the left.
2 Touch desired item from the content
list.
Playback starts.
NOTE
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Touch [ 3 ] on the selected artwork.
Search from album artwork
(USB device and iPod only)
The first song in the album is played.
In addition, you can create your original
playlist from this screen. For details, see
You can search music files by selecting the
album artwork.
1 Touch [
].
NOTE
Sub function menu appears.
• After all tracks in the album are played, the same
album is played again from the first track.
2 Touch [
].
• The albums with no photo are not displayed.
Favorite screen appears.
3 Touch desired artwork in the lower line.
NOTE
• The key in the upper side of the screen functions
differently depending on the status.
When [Load Albums] appears:
You have not yet loaded any artworks. Touch the
key to start loading.
When [Load More Albums] appears:
Some artworks are not loaded. Touch the key to
load all artworks. If you touch the key, the track
being played may stop and another track may
start playback.
When the key does not available:
All artworks are already loaded.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite list
NOTE
You can create an original playlist of your
favorite 10 albums by selecting album
artworks.
• The favorite list is played to the right starting with
the selected album.
• To delete the album from the favorite list, touch
and drag it to the lower line.
1 Touch and drag the desired album
artwork in the lower line to the upper
line.
• You can change the playing order of the favorite
list by dragging the artwork in the list.
• The favorite list mode is canceled in the following
situations.
• Playing another album from other list (folder list,
category list, etc.)
• Playing another album by touching the artwork
in the lower line in the artwork list screen.
• The favorite list mode resumes after
disconnecting/connecting the device or turning
on/off. File being played, playing time code,
favorite list contents, favorite list order, etc.
resumes if file configuration of the device is not
changed.
Selected album is registered to the favorite
list.
NOTE
• The added album is placed on the extreme right.
• You cannot register the same album already
registered to the favorite list.
• Up to 10 albums can be registered to the list.
2 Touch the desired artwork in the
favorite list.
Selected album is played and the control
screen appears.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Control
You can adjust the movie playback from a
disc media.
1 In the playback screen, touch
illustrated area.
Movie Control screen appears.
2 Perform desired operation as follows.
Changes subtitle language
Touch [Subtitle].
Changes audio language
Touch [Audio].
Exits the menu
Touch [Exit].
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Pandora® Operation
You can listen to the Pandora® on this unit by controlling the application installed in the iPhone
or Bluetooth device.
To enter Pandora mode, touch [Pandora] icon in the Top Menu screen.
NOTE
• Install the latest version of the Pandora® application on your iPhone, Android or BlackBerry.
iPhone: Search for "Pandora" in the Apple App Store to find and install the most current version.
Android: Visit the Google play and search for Pandora to install.
BlackBerry: Visit www.pandora.com from the built in browser to download the Pandora application.
• When you first select Pandora as a source, the setting screen for the connection with the device installed the apps
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 Information display
Displays text information of current contents that is being played.
2 Artwork/Control switching area
The picture data is displayed if available from current content.
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Multi function menu
Various functions can be performed by using the keys in this area. For details on the keys, see Multi
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Content information
Displays the information of the current content being played.
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
8 List switching key
Touch to switch between the content list and the current content information.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
Sub function menu
The following functions can be performed by
using keys in this area.
The following functions can be performed by
using keys in this area.
[
]
Status bar in center
Searches for a station. For details on searching,
Displays the elapsed time since when you
select the station and status bar which shows
current location.
[
] (Thumbs down)
Thumbs down to the current song and skip to
the next song.
[
]
Creates a new station based on an artist being
played.
[ 38 ]
Plays or pauses the content of the current
station.
[
]
Creates a new station based on a song being
played.
[ ¢ ]
Skips the current song.
(Note this function is disabled when the
Pandora skip limitation is exceeded.)
[
]
Displays the genre list screen. For details on
[
] (Thumbs up)
Registers the current contents as favorite
content.
[
] (Bookmark Artist)
Bookmark an artist in the current contents.
] (Bookmark Song)
[
Bookmark a song in the current contents.
NOTE
• [SETUP], [AUDIO], [EXT SW], and [REAR] functions
same as iPod.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Station list screen
Genre list screen
You can perform the following functions
from this screen.
You can perform the following functions
from this screen.
The selected genre is created as a new
station.
Selects the station
Touch the station name in the list.
Sort the list in alphabetical order
You can select the desired letter from the list
which corresponds to the station name to help
narrow the search.
Sort the list by registered date
Touch [ByDate]. The list is sorted to begin with
the last registered station.
NOTE
• You can operate Pandora by using the
remote control. However, only playing,
pausing, and skipping are available.
• You cannot select iPod as rear source when
you select Pandora as main source in dual
zone function.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
iHeartRadio Operation
You can listen to the iHeartRadio on this unit by controlling the application installed in the
iPhone or Android.
To enter iHeartRadio mode, touch [iHeartRadio] icon in the Top Menu screen.
NOTE
• Install the latest version of the iHeartRadio application "iHeartAuto" on your iPhone or Android.
iPhone: Search for "iHeartAuto" in the Apple App Store to find and install the most current version.
Android: Search for "iHeartAuto" in Google play to find and install the most current version.
• When you first select iHeartRadio as a source, the setting screen for the connection with the device installed the
5
1
4
2
3
1 Artwork switching area
The picture data is displayed if available from current content. When the picture is not available, “No
Photo”is displayed.
2 Multi function key
3 Multi function menu
Various functions can be performed by using the keys in this area. For details on the keys, see Multi
4 Sub function menu
The following functions can be performed by using keys in this area.
• Thumbs up to the current song: Touch [
].
• Thumbs down to the current song. : Touch [
].
5 Content information
Displays the information of the current content being played.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
Station search
You can list and select station.
1 Touch [
] in the control screen.
The Station Search screen appears.
The following functions can be performed by
using keys in this area.
[ 37 ]
Stops or pauses. (Live station only)
[ 38 ]
Plays or pauses. (Custom station only)
[ ¢ ]
Skips the current song. (Custom station only)
[SCAN]
Scans for another station of the same genre.
(Live station only)
Selects the category and station
[
]
Touch the category and station name in the
list.
Creates a custom station based on the current
song.
[
]
[
]
Returns to the first hierarchy of the category
list.
Searches for a station. For details on searching,
[
]
[
]
Returns to the previous category list.
Saves currently playing station to My Stations.
(Live station only)
[
]
Deletes a saved station from My Stations. For
[
]
Use the Discovery Tuner to set the variety level
of a station. For details, see Discovery tuner
(P.50). (Custom station only)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
My stations edit
Discovery tuner
1 Touch [
] in the Station Search
You can set the variety level in a custom
station.
screen.
Station Edit screen appears.
1 Touch [
] in the control screen.
The Discovery tuner select screen appears.
2 Select the station to delete from My
stations.
Selects the variety
Touch the variety you want to set.
Selects the station
Touch to check the station name you want to
delete.
You can uncheck if you touch it again.
[
]
Returns to the first hierarchy of the category
list.
[
]
Returns to the previous category list.
3 Touch [
].
Station Delete screen appears.
4 Touch [Yes].
My station selected is deleted.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Apps Operation
You can listen to music or watch video from the Apps operating on iPod touch/iPhone or Android.
To enter Apps mode, touch [APPS] icon in the Top Menu screen.
NOTE
• When you turn on the power and select apps as the source, the caution for the operation, watching video and
listening music appears. With your acceptance, you can control apps, listen to music and watch video from apps
when you are driving.
• When you first select APPS as a source, the setting screen for the connection with the device installed the apps
3
1
2
1 Multi function key (iPod touch/iPhone only)
Touch to switch the multi function menu.
2 Multi function menu (iPod touch/iPhone only)
The following functions can be performed by using keys in this area.
• Plays or pauses: Touch [3], [8], or [38] (iPod only).
• Searches the previous/next track/file: Touch [4] or [¢].
• Fast forward or fast backward (iPod only): Touch [1] or [¡].
3 Sub function menu (iPod touch/iPhone only)
The following functions can be performed by using keys in this area.
• Hides all keys (During video file playback only): Touch [
]
NOTE
• The operable functions depend on the application.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
USB setup
USB/iPod/DivX Setup
You can perform setup when using USB/
iPod/ DivX (DNX891HD/ DNX7710BT/
DNX5710BT).
1 Set each item as follows.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
• Some setup items can only be set in standby
mode.
1 Touch [
] in the control screen.
Multi function menu appears.
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
2 Touch [SETUP].
SETUP Menu screen appears.
On Screen USB
Sets how to display the information of the USB
device.
3 Touch [Source].
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
Source SETUP Menu screen appears.
4 Touch [USB SETUP], [iPod SETUP], [APPS
SETUP], or [DivX SETUP] in the list.
Each setup screen appears.
See the following section for each setting.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod setup
1 Set each item as follows.
AudioBook Speed
Sets the audio book playback speed. Select
from [Slow], [Normal] (default), and [Fast].
Wide Screen*
Sets Wide Screen. Set [ON] (default) or [OFF].
On Screen iPod
Sets how to display the information of the
iPod.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
iPod connection setup
Sets the way to connect the iPod/iPhone with
this unit For details on searching, see iPod/
* This setting is not available when an iPod is
connected.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone connection setup
NOTE
1 Touch [iPod Connection Setup] in the
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
iPod Settings screen.
iPod connection setup screen appears.
• When you select“HDMI + BT”or“Bluetooth”in
step 3, Bluetooth device selection screen will
appear. Select the iPod/iPhone to be connected.
2 Touch [CHANGE].
If a connectable Bluetooth device is not
displayed, touch [Search] and do the pairing of
the devices.
3 Select the way to connect the iPod/
iPhone with this unit.
USB + AV-IN
Select when connecting with KCA-iP202.
USB 1Wire
Select when connecting with KCA-iP102/
Lightning to USB Cable.
HDMI + BT
Select when connecting with KCA-HD100 and
Lightning Digital AV Adapter or Apple 30-pin
Digital AV Adapter.
Bluetooth
Select when connecting via Bluetooth only.
4 Touch [Next].
Confirmation screen appears.
5 Touch [Done].
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select the way to connect the device
Application link setup
with this unit.
Sets the device an application is installed in
and the app is selected as the source.
1 Touch [CHANGE].
When selecting [iPod / iPhone]
USB + AV-IN
Select when connecting with KCA-iP202.
2 Select the device installed the apps.
USB 1Wire
Select when connecting with KCA-iP102/
Lightning to USB Cable.
HDMI + BT
Select when connecting with KCA-HD100 and
Lightning Digital AV Adapter or Apple 30-pin
Digital AV Adapter.
Bluetooth
Select when connecting via Bluetooth only.
iPod / iPhone
When selecting [Android / Other]
Select when using iPod/iPhone.
HDMI/MHL + BT
Android / Other
Select when connecting with KCA-MH100.
Select when using Android or BlackBerry
device.
Bluetooth
Select when connecting via Bluetooth only.
3 Touch [Next].
5 Touch [Next].
Connection setup screen appears.
Confirmation screen appears.
6 Touch [Done].
56
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX(R) VOD (DNX891HD/
DNX7710BT/ DNX5710BT)
NOTE
• This setup can be set when in STANDBY source.
• For the details of the necessary cable and adapter
to connect with iPod/iPhone and Android, refer to
This feature is available only for Central and
South America sales area.
• When you select“HDMI + BT”, “HDMI/MHL +
BT”or ”Bluetooth”in step 4, Bluetooth device
selection screen will appear. Select the device to
be connected.
1 Set each item as follows.
DivX(R) Registration Code
If a connectable Bluetooth device is not
displayed, touch [Search] and do the pairing of
the devices.
Checks the registration code. This code is
needed when making a disc which has DRM
(Digital Rights Management).
• When you select“iPod/ iPhone”in Apps Setup,
select“iPod”as the source, and select App on the
iPod, the source of this unit is also changed to
App automatically.
DivX(R) Deactivation
Deregisters the unit which is already registered.
After you touch the key, a confirmation
message appears. Follow the message and
complete the operation.
NOTE
• [DivX(R) VOD] is disabled when a disc is being
played.
• When downloading a DivX VOD file controlled
by DRM, register the code appeared on the
screen. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is
displayed when playing a DivX VOD file with the
viewing restriction. When the used number of
viewing reached maximum number, a warning
message appears and the file cannot be played.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio and HD Radio™ Tuner Operation
Radio/HD Radio Tuner Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode
• HD Radio broadcasting can be received only by the DNX891HD, DNX771HD, DNX691HD, DNX571HD, and
DNX571EX.
• HD Radio broadcasting is for North American sales area only.
• The screen shot below is for tuner. It may be different from the one for HD Radio broadcasting.
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 PS/Station name display
Displays the PS name or station name.
2 Information display/Control switching area
Displays the following information.
• Picture: The picture data or station Logo data is displayed if available from current content.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
• HD# (HD Radio tuner only): Channel display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Preset list
Displays the list of preset stations or channels and the information.
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Selects a channel (HD Radio tuner only): Touch [CH∞] or [CH5].
• Stores the information about the song being received: Touch [
• Tunes in by entering direct number (HD Radio tuner only):
Touch [
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed.
In HD Radio tuner mode, tuned program information will be displayed.
Multi function menu
Tuner
HD Radio tuner
The functions of each key are as follows.
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
Selects the method of searching from preset stations selecting or channel searching. For details on
[TI] (FM Tuner and HD Radio tuner only)
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
[PTY] (FM Tuner and HD Radio tuner only)
[RCV] (HD Radio tuner only)
Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, see
Continued
59
Download from Www.Somanuals.com. All Manuals Search And Download.
[
SETUP]
AUDIO]
EXT SW] (DNX891HD, DNX7710BT only)
Touch to control the external device power supply. For details, see External Device Control (P.104).
[ REAR
[
[
]
Touch to mute the rear speaker.
• Program Service Data provides song name, artist,
station ID, and other relevant data streams
This HD Radio receiver enables:
• Adjacent to traditional main stations are HD2/HD3
Channels, providing new original formats on the
FM dial
• Bookmark is a music & product discovery feature
that enables users to store information about
content on the radio and delivers interactive
information via QR codes
• HD Radio broadcasts deliver crystal clear, CD-like
digital audio quality to consumers
• Visual images, such as album art of over-the-air
broadcasts from HD Radio stations
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual memory
Memory Operation
Auto memory
You can store the current receiving station or
channel in memory.
1 Select a station or channel you wish to
You can store stations with good reception in
memory automatically.
store in memory.
2 Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
1 Touch [
].
Sub function menu appears.
2 Touch desired band key.
3 Touch [
] in the control screen.
The multi function menu appears.
4 Touch [AME] in the multi function
menu.
5 Touch [1] or [¡] in the sub function
menu.
Auto memory starts.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Search by program type
(FM tuner and HD Radio tuner
only)
Selecting Operation
Preset select
You can tune to a station with a specific
program type when listening to FM.
You can list and select memorized station or
channel.
1 Touch [
] in the control screen.
The multi function menu appears.
Selecting from the multi function menu
1 Touch the desired number from P1 to
P6.
2 Touch [PTY] in the multi function menu.
The unit will tune to the selected station or
channel.
TUNER PTY Mode screen appears.
3 Select a program type from the list.
4 Touch [Search].
Selecting from the preset list
1 Touch illustrated area.
You can search a station of the selected
program type.
List Control screen appears.
2 Select a station or channel from the list.
NOTE
• For HD Radio tuner, touching [
] and then
[Preset List] displays the preset channel list. You
can also select your desired channel from the list.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct search (HD Radio tuner
only)
Category/Channel search (HD
Radio tuner only)
You can tune in by entering the desired
frequency or channel number.
You can specify the desired category and
select a channel.
1 Touch illustrated area.
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [
] in the multi function menu.
List select screen appears.
3 Touch [Preset list] or [Category/
Channel list].
List Control screen appears.
2 Touch [
].
The previously used category or channel
list appears.
4 Select the desired content from the list.
NOTE
• Each time you touch [Info Change] in the channel
list, switches the sequence of the list.
10Key Direct screen appears.
Song title, artist name, album name
3 Enter the channel number and touch
[Enter].
NOTE
• To cancel the direct search, touch [Cancel].
• To clear the number you entered, touch [Clear].
• You can search by frequency. Each time you
touch [Mode] in the left part of the screen, it
changes the mode between frequency entering
mode and channel entering mode.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Traffic Information
(HD Radio tuner only)
Receive Mode (HD Radio tuner
only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio
Broadcast Data System that includes the TI
information.
You can set the radio broadcasts receive
mode.
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [RCV] in the multi function menu.
HD Radio tuner Mode screen appears.
1 Touch [
] in the control screen.
The multi function menu appears.
3 Select the receive mode from [Auto],
[Digital], and [Analog] using [2] and
[3].
2 Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• If you select [Auto], tunes to analog broadcast
automatically when there is no digital broadcast.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Bookmark list
Bookmark
(HD Radio tuner only)
Displaying a list of registered bookmarks
and detailed information and QR code of the
song.
Stores tag information (title, artist, album,
URL, and description) about the song you are
listening to now.
Detailed information and QR codes can
be displayed according to the stored tag
information.
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [
] in the multi function menu.
List select screen appears.
Registering a bookmark
3 Touch [Bookmark].
1 Touch [
].
Sub function menu appears.
2 Touch [
].
Registers a bookmark.
NOTE
• Up to 100 bookmarks can be registered to this
unit.
The Bookmark List appears.
4 Select the desired bookmark from the
list.
The bookmark infomation appears.
[
]
Deletes the bookmarks being displayed.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Bookmark delete
6 Touch [
].
Deletes all the selected bookmark(s)
Deleting a bookmark.
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [
] in the multi function menu.
List select screen appears.
3 Touch [Bookmark].
The Bookmark List appears.
4 Touch [Delete List].
The Bookmark Delete List appears.
5 Select the bookmark to delete from
the list.
[All]
Select all bookmarks.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
SiriusXM® Operation
SiriusXM® Basic Operation
Most functions can be controlled from the source control screen.
Before use
• SiriusXM® Satellite Radio operation requires the connection of the optional SiriusXM Connect Vehicle Tuner and
service. To activate the SiriusXM Connect Vehicle Tuner, you will need the Radio ID.
• Make a note of your Radio ID: For each SiriusXM Connect Vehicle Tuner, peculiar Radio ID is assigned. To confirm
your Radio ID, tune to channel 0. The letters I, O, S and F are not used in any Radio ID.
The Radio ID is also located on the label of the SiriusXM Connect Vehicle Tuner.
• How to activate your SiriusXM Service: Go to www.siriusxm.com/activatenow or call 1-866-635-2349 to activate
your SiriusXM Vehicle Connect Tuner.
To activate SiriusXM Canada service go to www.xmradio.ca and click on“ACTIVATE RADIO”in the top right corner,
or call 1-877-438-9677
NOTE
• Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode
• To use SiriusXM® Satellite Radio, the optional accessory is necessary.
• SiriusXM® Satellite Radio are for North American sales area only.
Simple Control screen
List Control screen
2
6
7
1
2
5
3
4
3
4
8
1 Signal Strength indication
Displays the received signal strength of the SiriusXM tuner.
2 Information display/Control switching area
Displays the following information.
• [SXM1], etc.: Band display
• Preset #: Preset number
• #CH: Channel display
• Logo: Channel logo display
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
68
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preset key/Multi function menu
Recalls the memorized channel. When touched for 2 seconds, store the current receiving channel in
memory.
When switched, various functions can be performed by using keys in this area.
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Music information
Displays the information of the current channel: Channel Name, Artist Name, Song Title, Content Info,
Category Name, Channel Description, Similar Channels
7 Sub function menu
The following functions can be performed by using keys in this area.
• Tunes in a station: Touch [CHS] [CHR].
• Searches the previous/next track: Touch [4] [¢]. fast forward/fast backward when keep on
• Tunes in by entering direct number: Touch [
] and enter the desired number. For details, see
8 List switching key
Touch to switch between the preset list and the information list.
Multi function menu
The functions of each key are as follows.
[P1] - [P6]
Selects the preset channel. Touch for 2 seconds to store the current station into the preset memory.
[
]
Selects the method of searching from preset channel selecting or category/channel searching. For
[SEEK]
Switches the seek mode in the following sequence; [SEEK1], [SEEK2].
• SEEK1: Tunes channels one after the other.
• SEEK2: Selects channels in preset (memory) one after the other.
[BAND]
Switches the band.
[38]
[
]/[
]
Touch for 2 seconds to register content as Alert content.
• [
]: Registers the artist of the song you are listening to now as an alert content.
• [
]: Registers the song you are listening to now as an alert content.
Continued
69
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
Turns the Traffic & Weather Jump function on or off.
[
]
Listen to live.
[TuneScan]
Plays samples from the starts of multiple buffered songs from each of the Smart Favorite channels that
[
SETUP]
AUDIO]
EXT SW] (DNX891HD only)
Touch to control the external device power supply. For details, see External Device Control (P.104).
[ REAR
Touch to mute the rear speaker.
[
[
]
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Operation
Manual memory
Selecting Operation
Preset select
You can store the current receiving station or
channel in memory.
You can list and select memorized station or
channel.
Selecting from the multi function menu
1 Select a station or channel you wish to
store in memory.
1 Touch the desired number from P1 to
P6.
2 Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.
The unit will tune to the selected station or
channel.
Selecting from the preset list
1 Touch illustrated area.
List Control screen appears.
2 Select a station or channel from the list.
NOTE
• For SiriusXM tuner, touching [
] and then
[Preset List] displays the preset channel list. You
can also select your desired channel from the list.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct search
Category/Channel search
You can tune in by entering the desired
frequency or channel number.
You can specify the desired category and
select a channel.
1 Touch illustrated area.
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [
] in the multi function menu.
List select screen appears.
3 Touch [Category/ Channel list].
List Control screen appears.
2 Touch [
].
The previously used category or channel
list appears.
4 Select the desired content from the list.
NOTE
• All the channels in the selected category appear.
• Touching [All Channels] displays all the channels.
10Key Direct screen appears.
• Each time you touch [Info Change] in the channel
list, switches the sequence of the list.
3 Enter the channel number and touch
[Enter].
Channel name, artist name, song title, category
name, content info
NOTE
• To cancel the direct search, touch [Cancel].
• To clear the number you entered, touch [Clear].
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Content alert
When a broadcast program related to the
registered artist, song or team starts, a
message appears to allow you to switch the
current channel to the relevant channel.
1 When the broadcast of the registered
content starts, an Alert screen appears.
Jump
Touch to display the Alert Content List screen.
Ignore
Touch to cancel the Content alert.
2 Select a content from the list.
NOTE
• Each time you touched [Type], switches the
sequence of the Content alert list as follows;
Artist Alert, Song Alert, GameAlert™
• For how to register artists and songs and turn on/
off the Team alert function, see Multi function
• For how to set up the Content alert function, see
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Program list
Touching this plays back the displayed
program.
SiriusXM Replay™
You can replay last 60 minutes of current
channel.
[Info Change]
1 Touch [SiriusXM] in the Top Menu.
Touching this allows you to switch among the
Artist name, Song title, Category name, and
Content info cyclically.
[4] [¢]
Searches the previous/next track. Fast forward/
fast backward when keep on touching.
[38]
Plays or pauses.
[CHS] [CHR]
Tunes in a station.
Replay time bar
Display recorded capacity and playback
position.
[
]
Listen to live.
[
]
Displays a list of recorded data on a program
basis.
[BAND]
Switches the band.
2 Touch [
] to display a program list.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart Favorites, TuneStart™
TuneScan™
Station memory number 1 though 6 of
current band are Smart Favorite channels.
SiriusXM Vehicle Tuner automatically
buffered the broadcast audio content of the
Smart Favorites channels in the background.
TuneScan™ is a feature that plays samples
from the starts of multiple buffered songs
from each of the Smart Favorite channels
that predominantly play music selections.
You have easy access to a large sampling of
music content and can enjoy hearing a full
song when stopping the scan on a song of
interest.
You can rewind and replay up to 30 minutes
of any of the missed news, talk, sports or
music content when you tune to a Smart
Favorite channel. (see SiriusXM Replay™
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [TuneScan] in the multi function
When tuning Smart Favorites channels,
songs will play from the beginning of each
track (Tune Start). You can enable/disable
menu.
The introductions of the songs will be
played in recorded order.
3 Touch [TuneScan] while your favorite
song is being played.
Scan finishes and continues playing the
song.
NOTE
• To cancel Tune Scan, Touch [TuneScan] for 2
seconds.
After cancel, the channel before starting Tune
Scan will be played.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental code
SiriusXM Setup
You can set a SiriusXM parental code.
NOTE
1 Touch [Change] of [Parental Code] in
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
the SiriusXM SETUP screen.
Parental Pass Check screen appears.
NOTE
1 Touch [
] in the control screen.
Multi function menu appears.
• The code number is set to“0000”as default.
2 Touch [SETUP] in the multi function
2 Enter the current code number.
menu.
Parental Pass 1st entering screen appears.
SETUP Menu screen appears.
3 Enter the new code number and touch
3 Touch [Source].
[Enter].
Parental Pass 2nd entering screen appears.
4 Enter the same code number as you
input in step 3 and touch [Enter].
The code number is confirmed and
SiriusXM parental code is now set.
Source SETUP Menu screen appears.
4 Touch [SiriusXM SETUP] in the list.
SiriusXM SETUP screen appears.
See the following section for each setting.
• Set up the content for Content alerts
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control
NOTE
• Touch [All Channels] to display all the channels.
Parental control is a feature that provides the
user with the ability to prevent unauthorized
access to mature content and user selected
channels.
6 Touch each channel list and set on or
off.
1 Touch [ON] or [OFF] of [Parental Lock
Mature] in the SiriusXM SETUP screen.
2 Enter the same code number as you
originally input in Parental code (P.76)
and touch [Enter].
Turns the Mature on or off.
Default is “OFF”.
If you want to separately set the parental
lock for each channel, select OFF and
proceed to step 3 onward.
NOTE
3 Touch [SET] of [Parental Lock Channel
• Each time you touched [Info Change], switches
the sequence of the channel list as follows;
Channel name, Artist name, Song title, Category
name, Content information.
Select] in the SiriusXM SETUP screen.
Parental Pass Check screen appears.
NOTE
• Touch [’] to return to Parental Lock Category
beforehand.
Select screen.
• Touch [
] to return to SiriusXM SETUP screen.
• To delete the parental lock channel setting, touch
and hold [Unlock All] for 2 seconds, enter the
Parental code number, then touch [Enter].
4 Enter the same code number as you
originally input in Parental code (P.76)
and touch [Enter].
Parental Lock Category Select screen
appears.
5 Touch the desired category from the
list.
Displays all the channels in the selected
category.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Skip channel select
Content alerts setup
You can set the undesired channels to skip.
You can turn on or off the Content alerts
function.
1 Touch [SET] of [Skip Channel Select].
1 Touch [ON] or [OFF] of [Content alerts]
Skip Category Select screen appears.
in the SiriusXM SETUP screen.
2 Touch the desired category from the
Turns the Content alerts on or off.
Default is “ON”.
list.
Displays all the channels in the selected
category.
3 Touch each channel list and set ON or
OFF.
NOTE
• Operations in each list screen are same as
• To delete the skip channel setting, touch and
hold [Unskip All] for 2 seconds, enter the Parental
code number, then touch [Enter].
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Content alerts Content Set
City select for Traffic &
Weather Jump
You can set a content for Content alerts.
You can select a city for which traffic
information or weather forecast is to be
received with the Content alerts function.
1 Touch [SET] of [Content alerts Content
Set] in the SiriusXM SETUP screen.
Artist list screen appears.
1 Touch [2] and [3] of [Traffic Weather
NOTE
Jump City Select] to select a city.
• Touching [Disable All] of [Content alerts Content
Set] turns all content of Content alerts“OFF”.
2 Touch [Type] to select the screen of the
content you want to set up.
Touching this allows you to switch among
the Artist list, Song list, and Team list
cyclically.
3 Touch each content list and set ON or
OFF.
NOTE
• Touch“Delete”to delete the currently selected
content from the Artist list and Song list.
• Available teams were pre-registered in the Team
list. Team(s) cannot be registered or deleted
manually.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
TuneStart™
Reset
1 Touch [ON] or [OFF] of [Tune Start] in
1 Touch [Reset] of [SiriusXM Reset] for 2
the SiriusXM SETUP screen.
seconds in the SiriusXM SETUP screen.
Turns the Tune start on or off.
Default is “ON”.
All SiriusXM setting returns to default.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Control
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.
Registering And Connecting
Bluetooth Unit
It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
About the cell-phone and
Bluetooth audio player
You can register up to 5 Bluetooth units.
This unit conforms to the following
Bluetooth specifications:
1 Touch [Menu] on any screen.
2 Touch [SETUP].
Version
Bluetooth Ver. 3.0+EDR Certified
SETUP Menu screen appears.
3 Touch [Bluetooth].
Profile
Cell-phone:
HFP (V1.6) (Hands Free Profile)
SPP (Serial Port Profile)
SDP (Service Discovery Profile)
PBAP (Phonebook Access Profile)
GAP (Generic Access Profile)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (V1.4) (Audio/Video Remote Control
Profile)
Bluetooth SETUP screen appears.
See the following section for each setting.
Sound codec
SBC, AAC, MP3, aptX (DNX891HD, DNX7710BT
only)
NOTE
• For the cell-phones verified for compatibility,
access the following URL:
http://www.kenwood.com/cs/ce/bt/.
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering the Bluetooth Unit
Connecting the Bluetooth unit
1 Touch the device name you want to
1 Touch [Search].
Searched Device List screen appears.
connect.
Profile select screen appears.
NOTE
NOTE
• You cannot register the Bluetooth unit when you
• If the icon is lighted, it means that the unit will
use that device.
are using the following sources:
iPod, Bluetooth Audio, APPS, iHeart, Pandora
If you want to register the Bluetooth unit while
using one of the above mentioned sources, send
the connection request from the Bluetooth unit
and register it.
2 Set each profile as follows.
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See Connecting the Bluetooth unit
• The Searched Device List screen cannot be
displayed, when the receiving source is Pandora,
iHeartRadio, or Bluetooth Audio.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
TEL (HFP)
Means that the device is a cell-phone.
Audio (A2DP)
Means that the device is an audio player or
cell-phone with audio player.
2 Select the Bluetooth unit to register
from the list.
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
• Touching [Remove] of [Device Remove Confirm]
removes registration information. After you touch
the key, a confirmation message appears. Follow
the message and complete the operation.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• A Bluetooth device cannot be searched while
the source is Pandora, iHeartRadio, or Bluetooth
audio.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
3 Enter PIN code form the cell-phone.
Profile select screen appears.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Bluetooth Audio Device
Bluetooth basic operation
Simple Control screen
List Control screen
1
5
4
2
3
2
3
1 Information display
Displays the name of the track information. If the information is not available, device name is displayed.
2 Multi function key
Touch to switch the multi function menu.
3 Multi function menu
The functions of each key are as follows.
• [4] [¢]: Searches the previous/next content.*
• [3]: Plays.*
• [8]: Pauses.*
• [7]: Stops playback.*
• [ EXT SW] Control the external device power supply. (DNX891HD, DNX7710BT only)
• [ REAR ]: Touch to mute the rear speaker.
4 Control switching area
Touch to switch between the Simple Control and List Control screen.
5 File information
Displays the information of the current file.
* These items appear only when the audio player which supports AVRCP profile is connected.
NOTE
• If the operation keys do not appear, operate from the player.
• Depending on your cell-phone or audio player, audio may be heard and controlled but text information may not
appear.
• If the volume is too low, raise it on your cell-phone or audio player.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select a dialing method.
Using Hands-Free Unit
You can use telephone function by
connecting the Bluetooth telephone to this
unit.
Making a call
1 Press the <TEL> button.
See the following table for each method.
Call by entering a phone number
1Touch [
2Enter a phone number with number keys.
3Touch [ ].
Call using call records
1Touch [ ], [ ], or [
2Select the phone number from the list.
3Touch [ ].
Call using the phonebook
1Touch [ ].
].
].
2Select the name from the list.*1*2
3Select the number from the list.
4Touch [
].
Hands Free screen appears.
Call using the preset number
1Touch [Preset #] to start calling the
corresponding phone number.
NOTE
• When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
2Touch [
].
• Up to 600 phone numbers can be registered for
each registered cell-phone.
• Up to 30 digits can be registered for each
phone number along with up to 127 characters
representing a name. (127 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
Continued
85
Download from Www.Somanuals.com. All Manuals Search And Download.
*1 You can sort the list to begin with touched
character.
Receiving a call
1 Touch [ ] to answer a phone call or
[
] to reject an incoming call.
• Characters with no corresponding name
will not appear.
• During search, a non-accent character
such as “u” is searched for instead of an
accent character such as “ü”.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.
*2 You can set the list to arrange in the order
of last name or first name. For details, see
NOTE
• If you edited the phonebook in your cell-phone,
touch“Download”on top of the phonebook list in
this unit to download it from your cell-phone. The
phonebook in this unit will be updated with the
latest downloaded data.
• While your car is moving, some functions are
disabled for safety reasons. The keys associated
with the disabled functions become ineffective
if touched.
• The status icons such as battery and antenna
displayed may differ from those displayed on the
cell-phone.
• Setting the cell-phone in the private mode can
disable the hands-free function.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations during a call
Phone number preset
Adjust the receiver volume
You can register frequently used phone
numbers to this unit.
Press the <∞> or <5> button.
1 Enter the number you want to register
in Hands Free screen.
Turn the volume knob.
2 Touch [Preset 1], [Preset 2], or [Preset 3]
for 2 seconds in the Hands Free screen.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Switching the speaking voice output
Touching [
]/ [
] each time
switches the speaking voice output between
cell-phone and speaker.
Call-waiting
When you receive a call while talking on
another call, you can answer the newly
received call by touching [ ]. The current call
is on hold.
Each time you touch [ ], the caller will
change.
When you touch [
], the current call will end
and switch to the call in hold.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Recognition
Smartphone Link
You can access the voice recognition function
of the cell-phone connected to this unit.
You can search the cell-phone phonebook
by voice. (The functionality depends on the
cell-phone.)
You can receive Garmin’s traffic information
and weather forecast by connecting
your Android smartphone in which the
Smartphone Link application is installed to
this unit.
1 Press the <TEL> button for 1second.
1 Press the <NAV> button.
Press for 1 second
Press for 1 second
Navigation screen appears.
Touch [Apps] on the Main Menu screen and
then an icon of your desired content
For details, see Navigation system manual.
Voice Recognition screen appears.
2 Start speaking.
NOTE
NOTE
• You can use voice recognition function by
touching [
• Install the latest version of the Smartphone Link
application on your Android.
] on the Hands Free screen.
Search for“Smartphone Link”in the Google play
to find and install the most current version.
• For how to register the Bluetooth device
88
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Set each item as follows.
Hands-Free Setup
You can perform various setup about
handsfree function.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Bluetooth].
Bluetooth SETUP screen appears.
Bluetooth HF/Audio
Select the speakers to output the sound from
cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
4 Touch [TEL SET-UP] in the Bluetooth
SET-UP screen.
Front Only: Outputs from the front speakers.
All (Default): Outputs from all speakers.
Auto Response*
Sets an automatic response time to pick-up an
incoming call.
OFF (Default): Automatic response is not
available.
0-99: Set calling ring time (second).
Auto Pairing
Hands-free SETUP screen appears.
When set to“ON”, the Apple Auto Pairing
function is turned on to automatically register
the iPod touch or iPhone connected to this
unit.
ON (Default): Uses Apple Auto Pairing
function.
OFF: Not uses Apple Auto Pairing function.
Phone Information Use
Sets whether to use phonebook, outgoing,
incoming and missed calls list.
ON (Default): Yes.
OFF: No.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Sort Order
Sets how to arrange the cell-phone
phonebook.
First: Arranges in the order of first name.
Last (Default): Arranges in the order of last
name.
Echo Cancel Level
Adjusts the level of echo cancellation.
Default is“0”.
Microphone Level
Adjusts the sensitivity of the telephone
microphone. Default is“15”.
Noise Reduction Level
Reduces the noises generated by surrounding
environment without changing the
microphone volume. Use this setting when the
voice of caller is not clear. Default is“-10”.
[Restore]
Resets the settings to the default settings.
* Either the time interval for automatic
answer set on this unit or the time interval
set on the cell-phone, whichever is shorter
takes effect.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Monitor Screen Setup
Bright / Tint* / Color* / Contrast / Black /
Sharpness*
You can adjust image quality in iPod video,
picture file, menu screen, etc.
Adjusts each item.
Dimmer
1 Touch the lower left area of any screen
Select dimmer mode.
ON: The display and buttons dim.
OFF: The display and buttons do not dim.
for at least 1 second.
SYNC (Default): Turns the dimmer function on
or off when the vehicle light
control switch is turned on
or off.
NAV-SYNC: Turns the dimmer function on or
off according to the Navigation
Day/Night display setting.
Mode* (except USB)
Select screen mode.
Full: Full picture mode
Screen Control screen appears.
2 Adjust each item as follows.
iPod/ AV-IN/ Camera
Just: Justify picture mode
Zoom: Zoom picture mode
Normal: Normal picture mode
DVD/ USB
* Playback screen only
NOTE
• Adjusting items are different depending on the
current source.
• You can perform this function only when you
have applied the parking brake.
• The image quality can be set for each source.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
View Camera Control
System Setup
NOTE
You can set up display when a CMOS-3xx
Series view camera is used.
• Each operation in this section can be started from
the multi function menu.
1 Press the <AUD> button for 1second.
1 Touch [Menu] on any screen.
TOP Menu screen appears.
2 Touch [SETUP].
3 Touch [System].
Camera view screen appears.
2 Adjust each item as follows.
System Menu screen appears.
See the following section for each setting.
1
2
3
• Set up external switch (DNX891HD,
DNX7710BT only) (P.96)
1 Guideline
Touching each time turns on or off the
guideline display alternately.
2 Switching the View Camera
Touching each time changes between the
front view camera and rear view camera.
3 Angle
Touching each time changes camera angles in
the following order:
Super wide view/ Wide view/ Overhead view/
Wide view + Top view/ Corner view
NOTE
• The video camera controls described above
may not be operable depending the connected
cameras.
• [AUD Key Longer than 1 Second] must be set to
93
Download from Www.Somanuals.com. All Manuals Search And Download.
User interface
AUD Key Longer than 1 Second
You can setup user interface parameters.
You can set the operation performed when the
AUDIO key is pressed for 1 second. Select from
”V.OFF”/”CAM”.
1 Touch [User Interface] in the list.
User Interface screen appears.
V.OFF: Turn the display off.
2 Set each item as follows.
CAM (Default)
:
Switches to the front or rear
view camera video display.*
TEL Key Longer than 1 Second
You can set the operation performed when
the TEL key is pressed for 1 second. Select from
“Voice”/”V.OFF”/”R-CAM”.
Voice (Default): Displays the Voice Recognition
V.OFF: Turn the display off.
R-CAM: Switches to the rear view camera video
Beep
Turns the key touch tone on or off.
Default is“ON”.
display
.
Animation
Sets whether to display animation. Default is“ON”.
Language
Select the language used for the control
screen and setting items. See Language setup
Secondary
Sets whether to display the navigation
information in the audio screen or vice versa.
Default is“ON”.
Text Scroll
Allows scrolling of text display on the source
control screen. Select from“Auto”/”Once”/”OFF”.
Auto (Default): Scrolls the text automatically.
*When you set [Front Camera] to OFF, the
display will change to the rear view camera
and when you set it to “CMOS-3xx”/ “Other”,
the display will change to the front view
camera. See Camera Setup (P.102)
Once: Allows you to scroll the text only once
automatically when updated.
OFF: Does not scroll the text automatically.
Drawer Close
Sets whether to close the common menu
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Language setup
Touch panel adjustment
1 Touch [SET] of [Language] in the User
1 Touch [Touch] in the System Menu
Interface screen.
screen.
Language Setting screen appears.
Touch Panel Adjustment screen appears.
2 Set each item as follows.
2 Follow the instruction on the screen
and touch the center of each
.
Select Mode
Selects the mode to select a language.
Easy (Default): Selects a language easily.
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
Advanced: Allows you to select languages for
respective items.*
• To reset to the initial status, touch [Reset].
Language Select
Selects a language.
* If you select [Advanced] for Select Mode,
the following screen appears.
GUI Language Select:
Selects the display language used for the
control screen and so forth.
Navigation Language Select:
Selects the language used for navigation.
Text Language Select:
Selects the language used for tag text (song
information).
3 Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Security setup
EXT SW setup (DNX891HD,
DNX7710BT)
A red indicator will blink on the unit after the
ACC is set to OFF, warning potential thieves.
Set up the external switch power mode.
If turned to “ON” (default), the security
indicator on the front panel flashes when the
vehicle ignition is off.
1 Touch [EXT SW] in the System Menu
screen.
EXT SW screen appears.
1 Touch [Security] in the System Menu
2 Set each item as follows.
screen.
Security screen appears.
2 Touch [ON] or [OFF] of [SI].
SW Name
Sets the name of the external device.
Output Pattern
Sets the power signal output mode among
“Pulse”/“Level”. Default is“Pulse”.
You can set to turn output on/off each time
the button on the EXT SW screen is touched.
Pulse Set
Sets the pulse signal output time.
Outputs 500ms when“1”is set.
Increases by 200ms with each step. Up to 100
steps can be set.
NOTE
• You can enter characters only after you have
applied the parking brake.
• “Pulse”: Generates a single power signal pulse.
• “Level”: Continues output of high power signal.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Follow the instruction on the screen.
Setup memory
Audio Control, AV-IN SETUP, Camera, and
Audio SETUP settings can be memorized. The
memorized settings can be recalled at any
time. For example, even when the settings
are cleared due to replacement of the
battery, the settings can be restored.
1 Touch [SETUP Memory] in the System
Menu screen.
SETUP Memory screen appears.
2 Follow the instruction on the screen.
Recall
Recalls the memorized settings.
Memory
Memorizes the current settings.
Clear
Clears the currently memorized settings.
Cancel
Quits memorization/recalling of settings.
[Lock]/[Unlock]*
Locks or unlocks the AV-IN SETUP, and Audio
SETUP settings.
Yes
Memorizes or recalls the settings.
No
Cancels the function or memorization.
The SETUP Menu screen appears again.
* When [Lock] is selected, you cannot change
the AV-IN SETUP, and Audio SETUP settings.
Also, the locked key mark is displayed
under each setting icon in the setup menu.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor angle control
Display Setup
1 Touch [Menu] on any screen.
You can adjust the position of the monitor.
2 Touch [SETUP].
1 Touch [Angle] in the Display Menu
SETUP Menu screen appears.
screen.
Angle setup screen appears.
3 Touch [Display].
2 Select a below number that represents
your desired angle setting.
Display Menu screen appears.
See the following section for each setting.
• Control monitor angle
Default is “0”.
NOTE
• You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering original color
You can register your original color.
Panel color coordinate
You can set the screen and button
illumination color.
The selectable items differ depending on the
unit.
1 Touch [Adjust] in the Panel Color
Coordinate screen.
Panel Color RGB Coordinate screen
appears.
1 Touch [Color] in the Display Menu
2 Use [2] and [3] to adjust each color
screen.
value.
Color screen appears.
2 Touch [SET] of [Panel Color Coordinate].
3 Touch the desired preset key for 2
seconds.
Panel Color Coordinate screen appears.
Panel color scan
You can set the panel color to continuously
scan through the color spectrum.
NOTE
• You can touch [SET] or [Initialize] when
[Panel Color Scan] is set to off.
1 Touch [ON] of [Panel Color Scan] in the
• Touch [Initialize] to reset the settings to the
default settings.
Color screen.
Panel Color Scan is set to on.
3 Touch the desired color.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
display returns to the Background screen.
NOTE
Changing background image
You can load an image from the connected
USB device and set it for the background
image.
• Touching [
] rotates counter clockwise.
• Touching [
] rotates clockwise.
Before operating this procedure, it is
necessary to connect the device which has
the image to load.
6 Touch [Change] of [Background
Change] in the Background screen.
1 Touch [Background] in the Display
7 Select an image for background and
Menu screen.
touch [Enter].
Background screen appears.
NOTE
2 Touch [STANDBY].
readable image specifications.
• Touching [Delete] in the Background screen
deletes the background image. After you touch
[Delete], a confirmation message appears. Follow
the message and complete the operation.
3 Touch [Memory] of [User Background].
User Background File Select screen
appears.
4 Select the image to load.
5 Touch [Enter].
The selected image is loaded and the
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation Setup
You can set navigation parameters.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Navigation].
Navigation SETUP screen appears.
4 Set each item as follows.
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is“20”.
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is“ON”.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
R-CAM Settings*2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Front Camera*1
Selects the type of front camera to use.
Camera Setup
You can set camera parameters.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
CMOS-3xx: When the CMOS-300 series with ID
2 set is connected.
Other: When the other camera is connected.
3 Touch [Camera].
OFF (Default): When the front camera is not
used.
F-CAM Settings*3
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1 These settings become settable only when
the parking brake is on.
*2 This setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
Camera SETUP screen appears.
4 Set each item as follows.
*3 This setting becomes settable only
when the parking brake is on and “Front
Camera” is set to CMOS-300 series.
Rear Camera*1
Selects the type of rear camera to use.
CMOS-3xx: When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to revers.
OFF (Default): Does not switches to the rear
view camera video display
when shifting to revers.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Information
AV Input Setup
Check the software version of this unit.
You can set AV input parameters.
1 Touch [Menu] on any screen.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
2 Touch [SETUP].
SETUP Menu screen appears.
SETUP Menu screen appears.
3 Touch [Software].
3 Touch [Source].
Software Information screen appears.
4 Touch [AV-IN SETUP] in the list.
4 Confirm the software version. Touch
AV-IN SETUP screen appears.
[Update] as necessary.
5 Set each item as follows.
NOTE
AV-IN1 Name/AV-IN2 Name
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is“VIDEO”.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
AV Output Interface Setup
External Device Control
(DNX891HD, DNX7710BT only)
You can select an AV source to be output at
the AV OUTPUT port. Default is “VIDEO1”.
Control the external device power supply.
1 Touch [Menu] on any screen.
1 Touch [EXT SW] in the Source Control
screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [AV-OUT].
EXT SW Control screen appears.
NOTE
AV-OUT Interface screen appears.
• If [EXT SW] is not displayed, touch [
].
4 Touch [2] or [3] to set [AV-OUT] to
VIDEO1, DISC, iPod, USB, or OFF.
2 Touch the desired switch key.
You can turn on or off the external device
power supply.
NOTE
• Only when iPod is connected to this unit with
KCA-iP202, “USB”can be selected as AV output
source. For the connection setting, refer to iPod/
NOTE
• You must connect a commercially available relay
unit in order to use this function. Connect the
external device to be controlled to that relay unit.
setting the power on or off specification.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Audio
NOTE
Setting Audio
• Each operation in this section can be started from
the multi function menu.
1 Touch [Audio SETUP].
You can adjust the various settings such as
audio balance or subwoofer level.
1 Touch [Menu] on any screen.
2 Touch [Audio].
Audio screen appears.
See the following section for each setting.
Audio SETUP screen appears.
See the following section for each setting.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select a speaker size using [2] and [3].
The speaker size is different depending
on the speaker type and the unit.
Speaker setup
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
Front
OEM, 3-1/2 inch, 4 inch, 4-3/4 inch, 5 inch,
6-1/2 inch, 6-3/4 inch, 7 inch, 4x6, 5x7, 6x8,
6x9, 7x10
1 Touch [Speaker Select] in the Audio
Rear
SETUP screen.
None, OEM, 3-1/2 inch, 4 inch, 4-3/4 inch, 5
inch, 6-1/2 inch, 6-3/4 inch, 7 inch, 4x6, 5x7,
6x8, 6x9, 7x10
Speaker Select screen appears.
Subwoofer
None, 6 1/2 inch, 8 inch, 10 inch, 12 inch, 15
inch over
NOTE
• Select“None”if you have no speakers.
2 Touch the speaker you wish to adjust
and set each item as follows.
Tweeter (DNX891HD, DNX7710BT,
DNX691HD only)
You can set the tweeter when you are
selecting front speakers.
None, Small, Middle, Large
X’over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker
type.
For details, see Crossover network setup
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Crossover network setup
You can set a crossover frequency of
speakers.
Car type setup
You can setup the car type and speaker
network, etc.
1 Touch the speaker to set the crossover
1 Touch [Car Type] in the Audio SETUP
in the Speaker Select screen.
screen.
2 Touch [X’over].
Car Type screen appears.
X’over screen appears.
2 Select your car type from the list.
3 Set each item as follows.
TW (Tweeter) Gain *1 (DNX891HD,
DNX7710BT, DNX691HD only)
NOTE
• If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each channel) to
have the highest surround effects.
Adjusts the tweeter level. (When front is
selected on Speaker Select screen)
Gain (DNX891HD, DNX7710BT,
DNX691HD only)
Adjusts the front speaker, rear speaker, or
subwoofer level.
Phase*2
Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to“Reverse”. (When subwoofer is selected on
Speaker Select screen)
HPF FREQ
High Pass Filter adjustment. (When front or rear
speaker is selected on Speaker Select screen)
LPF FREQ
Low Pass Filter adjustment. (When subwoofer
is selected on Speaker Select screen)
Slope*3
Sets a crossover slope.
*1 Only when “Tweeter” is set to “Small”,
“Middle”, “Large” in <Speaker Setup>.
*2 Only when “Subwoofer” is set to a mode
other than “None” in <Speaker Setup>.
*3 Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in <X’over>.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker location setup
DSP select
1 In the Car Type screen, touch [Location].
You can select whether using DSP (Digital
Signal Processor) System.
Speaker Location screen appears.
2 Select the speaker locations using [3].
1 Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Front Speaker
Select the location from“Door”/“On Dash”/
“Under Dash”.
Bypass
There is no effect by DSP.
Rear Speaker
Through
There is an effect by DSP.
Select the location from“Door”/“Rear Deck”,
“2nd Row”/“3rd Row”(Minivan, Minivan
(Long)).
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling General Audio
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1 Touch [Audio Control].
1 Touch [Equalizer].
2 Set each item as follows.
Equalizer screen appears.
Fader #/Balance #
Adjust the volume balance around the
touched area.
[2] and [3] adjust the right and left volume
balance.
[5] and [∞] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to“None”.
Bass Boost
Sets the amount of bass boost among“OFF”/
“Level1”/“Level2”/“Level3”.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you
suddenly switch to another source may be
extremely loud.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Gain level (light green boxed area)
Operation
Adjust the gain level by touching the each
frequency bar.
Controlling EQ curves
Touching [2], [3], [5] and [∞] can also
adjust the level. Use [2] and [3] to select a
frequency, and [5] and [∞] to set the level.
1 Select EQ curve from [Natural],
[Rock], [Pops], [Easy], [Top40], [Jazz],
[Powerful], [iPod], and [User].
EQ INIT
Returns to the previous level which the gain
level is adjusted.
Flat
Tone curve becomes flat.
Bass EXT (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5 Hz.
Loudness
Sets the amounts of boost of low and high
tones.
DNX891HD, DNX7710BT, DNX691HD:
“OFF”, “Low”, “High”
NOTE
• [iPod] is available only during iPod source.
Controlling equalizer manually
This setting cannot be performed when you
select [iPod] in the Equalizer screen.
DNX771HD,
:“OFF”, “ON”
SW Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to“None”.
1 Touch [EQ] in the Equalizer screen.
2 Touch the screen and set the Graphic
Equalizer as desired.
DNX891HD, DNX7710BT, DNX691HD
DNX771HD,
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Zone Control
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
You can select different sources for both
front and rear positions in the vehicle.
• When the dual zone function is set to on, the
following functions are not available.
1 Touch [Zone Control].
• Output from the subwoofer
• Equalizer Control/ Space Enhancer (DNX891HD,
DNX7710BT, DNX691HD)/ Listening Position
• DSP Bypass Control/ Speaker Setup/ Car Type
• Different sources from iPod/iPhone (apps) cannot
be set as front source and rear source separately.
Only one source (app) can be set as front and
rear sources.
Zone Control screen appears.
2 Touch [Dual Zone].
3 Set each source as follows.
[3] (Front Source, Rear Source)
Select the audio source for each.
[∞], [5] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Space Enhancer
(DNX891HD, DNX7710BT,
DNX691HD)
Sound Effect
You can set sound effects.
1 Touch [Sound Effect].
1 Touch [Space Enhancer] in the Sound
Effect screen.
Sound Effect screen appears.
Space Enhancer screen appears.
2 Touch [Small], [Large], or [OFF].
Each setting value indicates the
soundscape level.
NOTE
• This setting is not available during HD Radio tuner
source.
See the following section for each setting.
• Set space enhancer (DNX891HD,
DNX7710BT, DNX691HD) (P.113)
• Set up elevation (DNX891HD,
DNX7710BT, DNX691HD) (P.114)
• Set up realizer or supreme (DNX891HD,
DNX7710BT, DNX691HD) (P.115)
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive Equalizer setting
Elevation
(DNX891HD, DNX7710BT,
DNX691HD)
The sound quality is automatically adjusted.
1 Touch [ON] or [OFF] of
You can raise the sound position heard from
the speakers virtually.
[Drive Equalizer+].
1 Touch [Elevation] in the Sound Effect
screen.
DNX891HD, DNX7710BT, DNX691HD:
The sound quality is automatically
optimized to meet the current car speed
by GPS.
Elevation screen appears.
DNX771HD
:
2 Select Elevation level from [High],
The sound quality is automatically
optimized to meet the current volume
level.
[Low], and [OFF].
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Realizer and Supreme
(DNX891HD, DNX7710BT,
DNX691HD)
Listening Position
You can adjust the sound effects according
to your listening position.
You can restore the sound lost due to audio
compression to a realistic sound.
1 Touch [Position].
1 Touch the screen in the Sound Effect
screen.
Position screen appears.
2 Select listening position from [Front R]
(Right front), [Front L] (Left front),
[Front All] (All front), and [All] using [2]
and [3].
Realizer
Realizer is sound enhancement and boosting
low frequencies (bass boost).
Select the level from“OFF”/“Level1”/“Level2”/
“Level3”.
Supreme
Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-frequency
range that is cut off when encoding.
This function works on DVD MEDIA, USB and
iPod sources.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Position DTA control
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
You can fine-adjust your listening position.
1 In Position screen, touch [Adjust].
• If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
2 Select the speaker you wish to adjust
by touching speaker icon.
Determine the center of the currently set
listening position as the reference point.
1
2
3
4
5
Measure the distances from the reference
point to the speakers.
Calculate the differences between the distance
of the furthest speaker and other speakers.
Input the differences calculated in step for
3
individual speakers.
Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
3 Set DTA as follows.
Example: When [Front All] is selected as the
listening position
+3.4feet
1.6feet
2.5feet
5feet
[2], [3]
+2.5feet
Adjust the settings of the DTA position.
+0feet
Gain
Touch to adjust the gain of each speaker.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
This unit can be operated using the remote control.
For DNX891HD, DNX7710BT, DNX691HD, and DNX5710BT, the remote control is supplied with
the unit.
For DNX771HD, DNX571HD and DNX571EX the remote control is the optional accessory (KCA-
RCDV331).
2CAUTION
• Put the remote control in a place where it will not move during braking or other operations. A
dangerous situation could result, if the remote control falls down and gets wedged under the pedals
while driving.
• Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause
the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately
rinse with water and consult a physician.
• Place the battery out of reach of children. In the unlikely event that a child swallows the battery,
immediately consult a physician.
Battery Installation
If the remote control operates only over shorter distances or does not operate at all, it is possible
that the batteries are depleted.
In such instances, replace the both batteries with new ones.
1 Insert two “AAA”/“R03”-size batteries with the and poles aligned properly, following
the illustration inside the case.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the Remote control Buttons
Switching the operation mode
Direct search mode
The functions operated from the remote
control differ depending on the position of
the mode switch.
Using the remote control, you can jump
directly to the desired file, track chapter, etc.
with entering the number corresponding to
the content.
AUD
•
NOTE
DVD
•
• This operation cannot be performed for USB
device and iPod.
•
T V
•
NAV
1 Press the <#BS> button several times
until the desired content appears.
The available contents are different
depending on the source.
DVD
Title number/Chapter number/Play time/Item
number*
* You may not be able to use this function with
some discs or scenes.
VCD 1.X and 2.X (PBC OFF)
Track number
VCD 2.X (PBC ON)
Scene number/number
Music CD
Track number/Play time
Audio files
AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode
Switch to this mode when playing a disc
media including DVD, VCD, and CD.
NAV mode
Switch to this mode when controlling
navigation function.
Folder number/File number
Radio
Frequency value
NOTE
HD Radio tuner
Frequency value/Channel number
SiriusXM
• When controlling a player that is not integrated in
the unit, select“AUD”mode.
Channel number
2 Enter the number of the content you
want to play using the numeric keypad.
3 For DVD or VCD, press the <ENTER>
button.
For music CD or audio files, press the
<POSITION> button.
For radio, press the <2> or <3> button.
The content you entered is played.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
4
1
3
2
5
6
7
17
19
8
18
20
9
10
11
21
22
12
13
23
24
14
25
26
15
16
Key
Name
Location of
Function
the mode switch
1
SRC
−
Switches to the source to be played.
In hands-free mode, hangs up the phone.
2
3
NAV
−
Switches between the navigation and the source screens.
MENU
DVD
Stops playing and memorizes the last point where the disc
stopped. The last point is deleted by pressing twice.
NAV
NAV
Displays Main menu.
4
5
OUT, IN
Zooms in or out the navigation map.
POSITION AUD, DVD
Pauses the track or file, and resumes playing by pressing twice.
During radio, HD Radio, and SiriusXM source in AUD mode,
switches the seek mode.
NAV
Cursor Key DVD
NAV
Displays the current position.
6
7
Moves the cursor in the DVD menu.
Moves the cursor or scrolls the map.
Performs the selected function.
ENTER
AUD, DVD
NAV
• Registers the selected position.
• Performs the selected function.
8
ROUTE M AUD
Screen mode changes each time you press this key during video
playback.
DVD
NAV
Returns to the DVD top menu.
Displays Route Option menu.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
Location of
Function
Switches navigation display on/off.
Displays the DVD menu.
Name
the mode switch
9
VOICE
AUD
DVD
Turns the playback control on or off while playing VCD.
NAV
Speaks the voice guidance.
10 VIEW
AUD, DVD
NAV
Switches the AV source to be output.
Switches between 2D and 3D map displays.
11 MAP DIR
AUD, DVD
Switches the display angle each time it is pressed.
NAV
Switches between the heading up navigation and north up
navigation map displays.
12 5/∞
AUD, DVD
Selects the folder to be played.
During radio, HD Radio, and SiriusXM source in AUD mode,
switches the bands to be received.
13 2/3
AUD, DVD
AUD
Selects the track or file to be played.
During radio, HD Radio, and SIRIUS/XM source in AUD mode,
switches to broadcast stations received by the unit.
14 Numeric
Specifies the number to search in direct search.
For details on the direct search mode, see Direct search mode
Keypad
DVD
• Press [1] [2] to fast forward/backward. Switches the fast forward/
backward speed each time you press this key.
• Press [4] [5] to slow forward/backward. Switches the slow
playback speed each time you press this key.*
*DVD only
15
+
DVD
Clears the number.
*
16 # BS
AUD, DVD
Switches to the direct search mode.
For details on the direct search mode, see Direct search mode
17 AUDIO
18 CANCEL
DVD
DVD
NAV
Switches the voice language each time you press this key.
Displays previous screen.
Cancels the operations.
19 SUBTITLE DVD
Switches the subtitle language.
20
−
−
When a call comes in, answers the call.
Switches the picture angle each time you press this key.
Adjusts the volume.
21 ANGLE
22 Vol 5∞
23 ZOOM
24 2 ZONE
25
26 ATT
DVD
DVD
Switches the zoom ratio (2, 3, 4, Off) each time you press this key.
Switches the Dual Zone function on and off.
Adjusts volume at rear when the Dual Zone function is on.
AUD, DVD
−
−
R.VOL
Lowers the volume by pressing the key once.
Restores the previous volume by pressing the key twice.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problems and Solutions
If any trouble occurs, first check the following table for possible problems.
• Some functions of this unit may be disabled by some settings made on this unit.
• What might seem to be a malfunction in your unit may just be the result of slight misoperation
or miswiring.
About settings
Problem
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase. to on.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
Reason
Subwoofer is not set
Solution
Set the subwoofer to on.
The dual zone function Set the dual zone function to off.
is enabled.
• Cannot select the output
destination of the subsource in is disabled.
the dual zone.
The dual zone function Set the dual zone function to on.
• Cannot adjust the volume of the
rear speakers.
• Cannot set up the equalizer.
• Cannot set up the crossover
network.
The dual zone function Set the dual zone function to off.
is enabled.
“DSP Select”is set to
“Bypass”.
Set“DSP Select”to“Through”.
About audio operations
Problem
Reason
Solution
Radio reception is poor.
The car antenna is not Pull out the antenna all the way.
extended.
The antenna control
Connect the wire correctly.
wire is not connected. See“Connection”in the Quick Start Guide.
Cannot play audio files stored in “CD Read”is set to“2”.
a disc.
Set“CD Read”to“1”.
Cannot select a folder.
The random play
function is enabled.
Turn off the random function.
Cannot perform repeat play
during VCD playback.
The PBC function is
enabled.
Turn off the PBC function.
The specified disc does not play, The disc is quite dirty.
but another one plays instead.
Clean the disc.
The disc is severely
scratched.
Try another disc instead.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
The sound skips when an audio
file is being played.
Reason
The disc is scratched
or dirty.
Solution
Clean the disc.
The recording
Record the file again or use another disc.
condition is bad.
Other
Problem
Reason
Solution
The Touch Sensor Tone doesn’t
sound.
The preout jack is being The Touch Sensor Tone cannot be output
used. from the preout jack.
Error Messages
When you fail to operate the unit correctly, the cause of the failure appears as the message on
the screen.
Error Message
Cause
Solution
Protect
Protective circuit has been activated Wire or insulate the speaker cord as
because a speaker cord has shorted appropriate and then push the <Reset>
or it has come in contact with the
car chassis.
Hot Error
When the internal temperature of
this unit rises to 60°C or more, the
protection circuit is activated and
you may not be able to operate
the unit.
Use the unit again after reducing the
temperature of the unit.
Mecha Error
The disc player is malfunctioning.
Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
Disc Error
Read Error
An unplayable disc is inserted.
The disc is quite dirty.
Change the disc.
Clean the disc.
Disc is upside down.
Load the disc with the labeled side up.
Region Code
Error
The disc you wanted to play has a
region code that cannot be played try another disc.
with this unit.
Parental Level
Error
The disc you wanted to play has a
you set.
Set the parental level.
Error 07–67
The unit is not operating correctly
due to some reason or other.
Push the unit’s Reset button. If the“Error
07−67”message does not disappear, see your
nearest Kenwood dealer.
No Device
(USB device,
Bluetooth
The USB device is selected as a
source although no USB device is
connected.
Change the source to any source other than
USB/iPod. Connect a USB device, and change
the source to USB again.
audio player)
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Cause
Solution
Disconnected
(iPod)
The iPod/Bluetooth audio player
is selected as a source although
no iPod/Bluetooth audio player is
connected.
Change the source to any source other than
iPod/Bluetooth. Connect an iPod/Bluetooth
audio player, and change the source to iPod/
Bluetooth again.
No Media file
no playable audio file. Media was
played that doesn’t have data
recorded that the unit can play.
try another USB device.
USB Device
Error!!
The connected USB device is rated Check the USB device. Some trouble may have
a current capacity higher than the
allowable limit.
occurred to the connected USB device.
Change the source to any source other than
USB. Remove the USB device.
Authorization
Error
Connection to the iPod has failed.
• Remove the iPod and then reconnect it.
• The unit does not support the iPod.
Update your
iPod
The iPod’s software is an older
version which the unit can not
support.
The unit may not support the connected iPod
model.
Confirm that the software for the iPod is the
latest version.
Navigation
Error. Please
The communication error has
occurred due to severely cold
Turn on power again after warming your car
interior.
turn on power temperature.
again later.
Check
The Aha application is stopped.
Start the Aha application of the your device.
Application
Please update The Aha application is an older
Confirm that the Aha application is the latest
version.
version which the unit can not
support.
your Aha
application
SiriusXM
Check Tuner
A SiriusXM tuner is not connected
to this unit.
Check that the connected SiriusXM Connect
Vehicle Tuner is connected.
Subscription
Updated - Press renewed.
Return To
The SiriusXM subscription has been Pressing the Control knob will clear the error
message.
Continue
Channel Not
Available
The currently selected channel is
unavailable.
—
—
Ch
The currently selected channel is
not subscribed to.
Unsubscribed
Check Antenna No antenna is connected to the
SiriusXM tuner.
Check that an antenna is connected to the
SiriusXM tuner.
No Signal
No SiriusXM radio signal is received.
—
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Unit
If the unit or the connected unit fails to operate properly, reset the unit.
Press the <Reset> button.
The unit returns to factory settings.
1
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to
• When the unit is turned on after resetting, the Initial SETUP screen appears. See Initial setup (P.11).
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Playable Media and Files
You can play various kinds of media and files on this unit.
List of playable discs
Disc types
DVD
Standard
DVD Video
Support
Remark
‡
×
×
‡
DVD Audio
DVD-VR
DVD-R*1
• MP3/WMA/AAC/MPEG1/MPEG2/DivX*2 playback
• Multi-border/Multisession playback (Playback
depends on authoring conditions)
‡
‡
‡
‡
‡
×
DVD-RW
DVD+R
DVD+RW
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
Only video format
CD-TEXT
‡
‡
‡
‡
×
CD
Music CD*1
CD-ROM
• MP3/WMA/AAC/MPEG1/MPEG2 playback
• Multisession is supported.
• Packet write is not supported.
CD-R
CD-RW
DTS-CD
‡
×
Video CD (VCD)
Super video CD
Photo CD
×
%
‡
×
CD-EXTRA
HDCD
Only music CD session can be played.
Only CD layer can be played.
CCCD
Others
Dualdisc
×
%
Super audio CD
*1 Incompatible with 8 cm (3 inch) discs.
*2 Function of DNX891HD, DNX7710BT, DNX5710BT
‡ : Playback is possible.
%: Playback is partly possible.
× : Playback is impossible.
NOTE
• When buying DRM enabled contents, check the Registration Code in the DivX(R) VOD (P.57). Each time a file
with the displayed code is played and protected against copying, the code changes.
• DivX can be played only from a DVD disc media.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Use of DualDisc
■ Video files
When playing a“DualDisc”on this unit, the surface of
the disc that is not played may be scratched while the
disc is inserted or ejected. Since the music CD surface
does not conform to the CD standard, playback may be
impossible.
• MPEG1 (.mpg, .mpeg, .m1v*)
*Mass-storage-class USB device only
• MPEG2 (.mpg, .mpeg, .m2v*)
*Mass-storage-class USB device only
• DivX (.divx, .div, .avi)
Function of DNX891HD, DNX7710BT, DNX5710BT
DVD only
(A“DualDisc”is a disc with one surface containing DVD
standard signals and the other surface containing
music CD signals.)
• H.264/MPEG-4 AVC (.mp4, .m4v)
Mass-storage-class USB device only
■ About disc format
• WMV 9 (.wmv, .m2ts)
Mass-storage-class USB device only
The disc format should be the one of the following.
• ISO 9660 Level 1/2
• Joliet
■ Picture files
• Romeo
Only picture files in USB device can be displayed.
• Long file name
Files stored in disc media is not supported.
• JPEG (.jpg, .jpeg)
About files
• PNG (.png)
• BMP (.bmp)
The following audio, video, and picture files
are supported.
NOTE
• BMP and PNG can be set only as wallpaper.
■ Audio files
• AAC-LC (.m4a)
• MP3 (.mp3)
■ Playing order of files
• WMA (.wma)
In the example of folder/file tree shown below, the files
are played in the order from ! to P.
• Linear PCM (WAVE) (.wav)
Mass-storage-class USB device only
: Folder
• FLAC (.flac)
Mass-storage-class USB device only
^
¡
Root
(1)
: Audio file
¡!
2
NOTE
• If music of normal CD and other playback systems
are recorded in the same disc, only the playback
system recorded at the first setout is played.
3
¡"
¡#
4
• WMA and AAC of which is covered with DRM
cannot be played.
¡$
5
• Although the audio files are complied with
the standards listed above, the play may be
impossible depending on the types or conditions
of media or device.
¡%
¡P
• An online manual about audio files is put on the
site, www.kenwood.com/cs/ce/audiofile/.
On this online manual, detailed information and
notes which are not written in this manual are
provided. Make sure to read through the online
manual as well.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectable iPod/iPhone
Usable USB device
The following models can be connected to
this unit.
You can use a mass-storage-class USB device
on this unit.
Made for
• iPhone 5
• iPhone 4S
• iPhone 4
The word “USB device” appearing in this
manual indicates a flash memory device and
digital audio players can be recognized as
mass-storage.
• iPhone 3GS
• iPhone 3G
• iPhone
■ About file system
The file system should be the one of the following.
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• FAT16
• FAT32
NOTE
• When the USB device is connected to this unit, it
can be charged through the USB cable.
• iPod with video
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• For the conformity information on iPod/iPhone
software,
access www.kenwood.com/cs/ce/ipod/.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended. (However,
maximum supply current of CA-U1EX is 500mA.)
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable
KCA-iP202 or KCA-iP102, you can supply power
to your iPod/iPhone as well as charge it while
playing music. However, the power of this unit
must be on.
• If you start playback after connecting the iPod,
the music that has been played by the iPod is
played first.
In this case, “Reading”is displayed without
displaying a folder name, etc. Changing the
browse item will display a correct title, etc.
• When the iPod is connected to this unit,
“KENWOOD”or“✓”is displayed on the iPod to
indicate that you cannot operate the iPod.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Bar Indicator Items
Shown below is a list of indicators displayed on the status bar in the screen.
Current status of this unit is displayed on the bar.
Status bar
C-REP
■ General
The chapter repeat function is on.
T-REP
The title repeat function is on.
ATT
The attenuator is active.
DUAL
The dual zone function is on.
TEL
■ VCD
Indicates the connection state of the Bluetooth
hands-free unit.
1chLL/2chLL
Identifies the left audio output of channel 1
or 2.
1chLR/2chLR
Identifies the monaural audio output of
channel 1 or 2.
1chRR/2chRR
• White: Connected
• Orange: Not connected
MUTE
The mute function is active.
LOUD
The loudness control function is on.
Identifies the right audio output of channel 1
or 2.
1chST/2chST
Identifies the stereo audio output of channel
1 or 2.
■ DVD/CD
FO-REP
Folder repeat function is on.
IN
A disc is inserted.
• White: A Disc is inside the unit.
• Orange: Error at the disc player
VIDEO
Identifies the video file.
MUSIC
Identifies the music file.
RDM
The random function is on.
REP
LL
Identifies the left audio output.
LR
Identifies the monaural audio output.
RR
Identifies the right audio output.
STEREO
Identifies the stereo audio output.
PBC
The PBC function is on.
SVCD
Identifies the Super Video CD.
The repeat function is on.
130
Download from Www.Somanuals.com. All Manuals Search And Download.
VER1
TI
The VCD version is 1.
VER2
The VCD version is 2.
REP
Indicates the reception state of traffic
information.
• White: TP is being received.
• Orange: TP is not being received.
The repeat function is on.
■ HD Radio reception
AUTO1
Seek mode is set to AUTO1.
AUTO2
Seek mode is set to AUTO2.
MANUAL
Seek mode is set to MANUAL.
HD
HD Radio station is being received.
M/S
A multicast digital broadcast is being received.
ANALOG
An analog broadcast is being received.
DIGITAL
A digital broadcast is being received.
■ USB
FO-REP
The folder repeat function is on.
VIDEO
Identifies the video file.
MUSIC
Identifies the music file.
PICTURE
Identifies the picture file.
RDM
The random function is on.
REP
The repeat function is on.
PLST
The play list mode is selected now.
ST
A stereo broadcast is being received.
■ iPod
■ SiriusXM
MUSIC
Identifies the music file.
VIDEO
Identifies the video file.
RDM
SEEK1
Seek mode is set to SEEK1.
SEEK2
Seek mode is set to SEEK2.
The random function is on.
A-RDM
The album random function is on.
REP
The repeat function is on.
■ Tuner
AUTO1
Seek mode is set to AUTO1.
AUTO2
Seek mode is set to AUTO2.
MANUAL
Seek mode is set to MANUAL.
ST
A stereo broadcast is being received.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Region Codes in the World
The DVD players are given a region code according to the country or area it is marketed, as
shown in the following map.
1
5
2
1
2
1
4
5
2
4
■ DVD disc marks
■ Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
ALL
Indicates a region number. The discs with this mark can
be played with any DVD player.
Prohibition Mark
8
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
32
■ Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not be
able to remove it from this unit.
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
9
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
16:9 LB
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
132
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Language Codes
Code
aa
Language
Code
ia
Language
Interlingua
Code
rn
Language
Kirundi
Afar
ab
af
am
ar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
ie
ik
id
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
ro
ru
rw
sa
sd
sg
sh
si
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
sk
sl
Slovenian
Samoan
Shona
sm
sn
so
sq
sr
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
ss
st
lb
ln
lo
lt
su
sv
sw
ta
te
tg
th
ti
tk
tl
tn
to
tr
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
lv
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
eu
fa
fi
fj
fo
ts
tt
fr
fy
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
ga
gd
gl
gn
gu
ha
he
hi
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hebrew
Hindi
Croatian
Hungarian
Armenian
Xhosa
Yoruba
Chinese
Zulu
Polish
ps
pt
qu
rm
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
hr
hu
hy
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic Range
DNX891HD, DNX7710BT
Specifications
: 100 dB (DVD-Video 96 kHz)
DNX771HD, DNX691HD, DNX571HD, DNX571EX,
DNX5710BT
■ Monitor section
Picture Size
: 98 dB (DVD-Video 96 kHz)
DNX891HD, DNX7710BT, DNX771HD
: 6.95 inches (diagonal) wide
: 156.6 mm (W) x 81.6 mm (H)
6-3/16 x 3-3/16 inch
DNX691HD, DNX571HD, DNX571EX, DNX5710BT
: 6.1 inches (diagonal) wide
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Sampling Frequency
: 44.1/ 48/ 96 kHz
:136.2 mm (W) x 72.0 mm (H)
5-6/16 x 2-13/16 inch
Quantifying Bit Number
: 16/ 20/ 24 bit
Display System
: Transparent TN LCD panel
■ USB interface section
Drive System
USB Standard
: TFT active matrix system
DNX891HD, DNX7710BT
: USB 2.0 Full/ High Speed
DNX771HD, DNX691HD, DNX571HD, DNX571EX,
DNX5710BT
Number of Pixels
: 1,152,000 (800H x 480V x RGB)
Effective Pixels
: USB 2.0 High Speed
: 99.99 %
File System
: FAT 16/ 32
Pixel Arrangement
: RGB striped arrangement
Maximum Power Supply Current
Back Lighting
DNX891HD, DNX7710BT
iPod/iPhone: DC 5 V 1 A
USB: DC 5 V 500 mA
DNX771HD, DNX691HD, DNX571HD, DNX571EX,
DNX5710BT
: LED
■ DVD player section
D/A Converter
: 24 bit
: DC 5 V 1 A
D/A Converter
: 24 Bit
Audio Decoder
: Linear PCM/ Dolby Digital/ MP3/ WMA/ AAC
Audio Decoder
: MP3/ WMA/ AAC/ WAV/ FLAC
Video Decoder
: MPEG1/ MPEG2/ DivX (DNX891HD/ DNX7710BT/
DNX5710BT only)
Video Decoder
: MPEG1/ MPEG2/ MPEG4/ WMV/ H.264
Wow & Flutter
: Below Measurable Limit
■ Bluetooth section
Technology
: Bluetooth Ver.3.0+EDR
Frequency Response
• 96 kHz : 20 – 20,000 Hz
• 48 kHz : 20 – 20,000 Hz
• 44.1 kHz : 20 – 20,000 Hz
Frequency
: 2.402 – 2.480 GHz
Total Harmonic Distortion
Output Power
: +4dBm (MAX), 0dBm (AVE), Power Class2
DNX891HD, DNX7710BT
: 0.008 % (1 kHz)
DNX771HD, DNX691HD, DNX571HD, DNX571EX,
DNX5710BT
: 0.010 % (1 kHz)
Maximum Communication range
: Line of sight approx. 10m (32.8 ft)
Audio Codec
S/N Ratio (dB)
SBC/ AAC/ MP3/ aptX (DNX891HD, DNX7710BT only)
DNX891HD, DNX7710BT
: 100 dB (DVD-Video 96 kHz)
DNX771HD, DNX691HD, DNX571HD, DNX571EX,
DNX5710BT
: 98 dB (DVD-Video 96 kHz)
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Profile
• HFP (V1.6) (Hands Free Profile)
Subwoofer level
: -50 – +10 dB
• SPP (Serial Port Profile)
• SDP (Service Discovery Profile)
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (V1.4) (Audio/Video Remote Control Profile)
• PBAP (Phonebook Access Profile)
• GAP (Generic Access Profile)
■ Digital FM tuner section (DNX891HD,
DNX771HD, DNX691HD, DNX571HD,
DNX571EX)
Frequency Range (step)
: 87.9 MHz – 107.9 MHz (200 kHz)
• Multi Profile support
Frequency Response ( 3.0 dB)
: 20 Hz – 20 kHz
■ HDMI/ MHL section
HDMI
: HDMI Type-A
S/N Ratio
: 75 dB (STEREO)
MHL Supported Version
: MHL 2
■ Digital AM tuner section (DNX891HD,
DNX771HD, DNX691HD, DNX571HD,
DNX571EX)
MHL Maximum Power Supply Current
: DC 5 V 900 mA
Frequency Range (step)
: 530 kHz – 1700 kHz (10 kHz)
■ DSP section
Graphics equalizer
DNX891HD, DNX7710BT, DNX691HD
Band: 13 Band
Frequency Response ( 3.0 dB)
: 40 Hz – 15 kHz
Frequency (BAND1 – 13)
S/N Ratio (dB)
: 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.5k/ 4k/
6.3k/ 10k/ 16k Hz
: 75 dB (STEREO)
DNX771HD, DNX571HD, DNX571EX, DNX5710BT
Band: 7 Band
Frequency (BAND1 – 7)
■ FM tuner section
Frequency Range (step)
DNX891HD, DNX771HD, DNX691HD, DNX571HD,
DNX571EX
: 87.9 MHz – 107.9 MHz (200 kHz)
DNX7710BT, DNX5710BT
: 62.5/ 160/ 400/ 1k/ 2.5k/ 6.3k/ 16k Hz
Gain
: -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dB
2Way X'Over
: 87.5 MHz – 108.0 MHz (50 kHz)
DNX891HD, DNX7710BT, DNX691HD
High pass filter
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/
120/ 150 / 180/ 220/ 250 Hz
Slope: -6/-12/-18/-24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/-12/-18/-24 dB/Oct.
DNX771HD, DNX571HD, DNX571EX, DNX5710BT
High pass filter
Usable Sensitivity
DNX891HD, DNX771HD, DNX691HD, DNX571HD,
DNX571EX (S/N : 30 dB)
: 7.2 dBf (0.8 μV/ 75 Ω)
DNX7710BT, DNX5710BT (S/N : 26 dB)
: 0.63 μV/ 75 Ω
Quieting Sensitivity (S/N : 50 dB)
DNX891HD, DNX771HD, DNX691HD, DNX571HD,
DNX571EX (S/N : 50 dB)
: 10.2 dBf (1.13 μV/ 75 Ω)
DNX7710BT, DNX5710BT (S/N : 46 dB)
: 15.2 dBf (1.6 μV/ 75 Ω)
Frequency: Through, 50/ 60/ 80/ 100/ 120/ 150/ 180/
220 Hz
Slope: -6/-12/-18/-24 dB/Oct.
Low pass filter
Frequency: 50/ 60/ 80/ 100/ 120/ 150/ 180/ 220 Hz,
Frequency Response ( 3.0 dB)
: 30 Hz – 15 kHz
S/N Ratio (dB)
Through
: 75 dB (MONO)
Slope: -6/-12/-18/-24 dB/Oct.
Selectivity ( 400 kHz)
Position
: Over 80 dB
Front / Rear /Subwoofer Delay
: 0 – 20.0ft (0.07ft Step)
Gain
Stereo Separation
: 45 dB (1 kHz)
: -8 – 0 dB
135
Download from Www.Somanuals.com. All Manuals Search And Download.
■ AM tuner section
■ Navigation section
Frequency Range (step)
Receiver
: 530 kHz – 1700 kHz (10 kHz)
: High-sensitivity GPS receiver
Usable Sensitivity
Reception Frequency
: 28 dBμ
: 1575.42 MHz (C/A code)
Acquisition Times
Cold : 26 seconds (typ)
■ Video section
(All satellites at -130 dBm Without aiding)
Color System of External Video Input
: NTSC/PAL
Update Rate
: 1/second, continuous
External Video Input Level (RCA jack)
: 1 Vp-p/ 75 Ω
Accuracy
Position: <2.5 meters, CEP, at -130 dBm
Velocity: 0.1 meter/sec
External Audio Max Input Level (RCA/mini jack)
: 2 V/ 25 kΩ
Position Method
: GPS
Video Input Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Antenna
Video Output Level (RCA jacks)
: External GPS antenna
: 1 Vp-p/ 75 Ω
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kΩ
■ General
Operating Voltage
: 14.4 V (10.5 – 16 V allowable)
■ Audio section
Maximum Power (Front & Rear)
: 50 W x 4
Maximum Current Consumption
: 10 A
Installation Dimensions (W x H x D)
DNX891HD, DNX7710BT, DNX771HD
: 181.7 x 112.2 x 163.0 mm
7-2/16 x 4-6/16 x 6-7/16 inch
DNX691HD, DNX571HD, DNX571EX, DNX5710BT
: 181.7 x 112.2 x 160.3 mm
Full Bandwidth Power (Front & Rear) (4 Ω, 14.4 V,
1 % THD)
: 22 W x 4
Preout Level (V)
DNX891HD, DNX7710BT, DNX691HD
: 5 V/ 10 kΩ
DNX771HD, DNX571HD, DNX571EX, DNX5710BT
: 2 V/ 10 kΩ
7-2/16 x 4-6/16 x 6-5/16 inch
Operational Temperature Range
: -10 °C – +60 °C
Preout Impedance
DNX891HD, DNX7710BT, DNX691HD
: ≤ 80 Ω
DNX771HD, DNX571HD, DNX571EX, DNX5710BT
: ≤ 600 Ω
Weight
DNX891HD, DNX7710BT, DNX771HD
: 2.5 kg (5.4 lbs)
DNX691HD, DNX571HD, DNX571EX, DNX5710BT
: 2.0 kg (4.4 lbs)
Speaker Impedance
: 4 – 8 Ω
NOTE
■ External SW (DNX891HD, DNX7710BT)
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.
Maximum Power Supply Current
: 500 mA
Specifications subject to change without notice.
136
Download from Www.Somanuals.com. All Manuals Search And Download.
more jurisdictions.
About this Unit
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and
software tools to convert your files into DivX videos.
■ Copyrights
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by JVC KENWOOD Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased
DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
• The“AAC”logo is a trademark of Dolby Laboratories.
• “Made for iPod”and“Made for iPhone”mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with iPod, iPhone, or iPad may
affect wireless performance.
• DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under license.
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registed trademarks of HDMI Licensing
LLC in the United States and other countries.
• MHL and the MHL logo are a trademark or registered
trademark of MHL, LLC.
- Incorporates MHL 2
• iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (¡)ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”)
AND/OR (¡¡)DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
• Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights reserved.
• HD Radio Technology manufactured under license
from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio™ and the HD, HD Radio, and“Arc”
logos are proprietary trademarks of iBiquity Digital
Corp.
•
is a trademark of DVD Format/Logo
Licensing Corporation registered in the U.S., Japan and
other countries.
• This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse
• THIS PRODUCT IS LICENSED UNDER THE MPEG-
4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A
CONSUMER FOR (¡) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4
VIDEO”) AND/OR (¡¡) DECODING MPEG-4 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://
WWW.MPEGLA.COM.
engineering and disassembly are prohibited.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
• Android is a trademark of Google Inc.
• BlackBerry®, RIM®, Research In Motion® and related
trademarks, names and logos are the property of
Research In Motion Limited and are registered and/or
used in the U.S. and countries around the world. Used
under license from Research In Motion Limited.
• Adobe, Acrobat and Reader are either registered
trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.
• QR Code ® is registered trademarks of DENSO WAVE
INCORPORATED in JAPAN and other countries.
• The aptX® software is copyright CSR plc or its group
companies. All rights reserved. The aptX® mark and
the aptX logo are trade marks of CSR plc or one of its
group companies and may be registered in one or
137
Download from Www.Somanuals.com. All Manuals Search And Download.
• libFLAC
• About Pandora®:
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,20
07,2008,2009 Josh Coalson
Requirements for listening to the Pandora® are as
follows:
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
iPhone or iPod touch
• Use an Apple iPhone or iPod touch running under
iOS3 or later.
- Redistributions of source code must retain the
above copyright notice, this list of conditions and the
following disclaimer.
• Search for“Pandora”in the Apple App Store to find
and install the most current version of the Pandora®
application on your device.
- Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or
other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the
names of its contributors may be used to endorse or
promote products derived from this software without
specific prior written permission.
Android™
• Visit the Google play and search for Pandora to
install.
BlackBerry®
• Visit www.pandora.com from the built in browser to
download the Pandora application.
• Bluetooth must be built in and the following profiles
must be supported.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND ONTRIBUTORS ``AS IS’’AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
NOTE
• In the application on your device, log in and create
an account with Pandora.
• (If you are not already a registered user, an account
can also be created at www.pandora.com.)
• Internet connection by LTE, 3G, EDGE, or WiFi.
• Pandora® is only available in the United States,
Australia, and New Zealand.
• Because Pandora® is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may become
unavailable.
• Some functions of Pandora® cannot be operated
from this unit.
• For issues using the application, please contact
Pandora® at [email protected].
138
Download from Www.Somanuals.com. All Manuals Search And Download.
• About iHeartRadio®:
Requirements for using iHeartAuto™ are as follows:
iPhone or iPod touch
• Use an Apple iPhone or iPod touch running iOS5
or later.
• Search for“iHeartAuto”in the Apple App Store to
find and install the most current version of the
iHeartAuto™ application on your device.
Android™
• Use an Android device with firmware 2.2 or later.
• Search for“iHeartAuto”on Google play to find and
install the most current version of the iHeartAuto™
application on your device.
Note
• iHeartRadio® is available only in the United States
and U.S. Territories
• For the best application experience, a 3G/4G or Wi-Fi
connection is recommended.
• Because iHeartAuto™ is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may become
unavailable.
• Some functions of iHeartRadio® cannot be operated
from this unit.
• If you experience issues while using the application,
please contact iHeartRadio® Customer Care at
http://help.iheartradio.com.
• iHeartRadio® and iHeartAuto™ are trademarks
owned by Clear Channel Broadcasting, Inc. All uses
are authorized under license.
139
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/
DNX571EX:
DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/
DNX571EX:
■ FCC WARNING
■ IC (Industry Canada) Notice
This device complies with Industry Canada licence-
exempt RSS standard(s).
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
Operation is subject to the following two conditions:
(1)This device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
The term“IC: ”before the certification/ registration
number only signifies that the Industry Canada
technical specification were met.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used
in accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
2CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
Under Industry Canada regulations, this radio
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
2CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
DNX891HD/ DNX771HD/ DNX691HD/ DNX571HD/
DNX571EX:
• Contains Transmitter Module
FCC ID: YZP-RBFAC21XX
• Contains Transmitter Module
IC: 7414A-RBFAC21XX
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS
RULES 21 CFR SUBCHAPTER J IN EFFECT AT
DATE OF MANUFACTURE.
Location: Top plate
140
Download from Www.Somanuals.com. All Manuals Search And Download.
■ CALIFORNIA, USA
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
■ Información acerca de la eliminación
de equipos eléctricos y electrónicos
al final de la vida útil (aplicable a los
países que hayan adoptado sistemas
independientes de recogida de
residuos)
Los productos con el símbolo de un contenedor con
ruedas tachado no podrán ser desechados como
residuos domésticos.
Los equipos eléctricos y electrónicos al final de la vida
útil, deberán ser reciclados en instalaciones que puedan
dar el tratamiento adecuado a estos productos y a sus
subproductos residuales correspondientes. Póngase
en contacto con su administración local para obtener
información sobre el punto de recogida más cercano.
Un tratamiento correcto del reciclaje y la eliminación
de residuos ayuda a conservar los recursos y evita al
mismo tiempo efectos perjudiciales en la salud y el
medio ambiente.
■ Para cumplimiento de la COFETEL:
“La operación de este equipo esta sujeta a las siguientes
dos condiciones:
(1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier
interferencia,
incluyendo la que pueda causar su operación no
deseada.”
■ Informação sobre a eliminação de
pilhas
Este produto não deve ser eliminado como lixo
doméstico geral. Devolva a pilha usada ao revendedor
ou entidade autorizada para que a mesma seja
devolvida ao fabricante ou importador.
A reciclagem e a eliminação de lixo de maneira
apropriada ajudarão a conservar os recursos naturais ao
mesmo tempo que prevenirão os efeitos prejudicais à
nossa saúde e ao meio ambiente.
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|