DNX7250DAB
DNX5250BT
DNX525DAB
DNX4250DAB
DNX4250BT
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
Check the latest edition
© 2013 JVC KENWOOD Corporation
IM382_Ref_E_En_01 (E)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Lens fogging
2 WARNING
When you turn on the car heater in cold
weather, dew or condensation may form
on the lens in the disc player of the unit.
Called lens fogging, this condensation on
the lens may not allow discs to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still
does not operate normally after a while,
consult your Kenwood dealer.
To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any
extended period.
Precautions on handling discs
• If you experience problems during
installation, consult your Kenwood dealer.
• Do not touch the recording surface of the
disc.
Precautions on using this unit
• Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull
them out horizontally.
• You can select language to display menus,
audio file tags, etc. See Language setup
• If the disc center hole or outside rim has
burrs, use the disc only after removing the
burrs with a ballpoint pen etc.
• The Radio Data System or Radio Broadcast
Data System feature won’t work where
the service is not supported by any
broadcasting station.
• Discs that are not round cannot be used.
Protecting the monitor
To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with the sharp tip.
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording
surface or discs that are dirty cannot be
used.
Cleaning the unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe it again with a clean soft
dry cloth.
• This unit can only play the CDs with
.
This unit may not correctly play discs which
do not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see
your writing software, and your recorder
instruction manual.)
¤
• Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erase screened print.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Read this Manual
Link header
You can refer each section or top page
with one-click.
Return to the Top page
CD, Disc, iPod, USB device
Operation title
Introduces the function.
Search Operation
You can search the music, video, or picture
file by some operations.
NOTE
NOTE
Introduces some tips, notes, etc.
• If you use a remote controller, you can jump
directly to the desired track/file with entering the
track/folder/file number, play time, etc. For details,
see “Direct search mode” (p.81).
Reference mark
Displayed in blue notes.
With one-click, you can jump to the
article related to the current section.
List search
You can search tracks, folders, and files
according to hierarchy.
For USB devices and iPods, you can list and
search files in the device by using playlist.
Operation procedure
Explains necessary procedures to
achieve the operation.
Press the <MENU> button during
playback.
Simple Control screen appears.
1
<
>: Indicates the name of panel
buttons.
]: Indicates the name of touch
keys.
Touch [
List Control screen appears.
].
2
3
[
Touch desired track/file.
Screen shot
Shows some screen shots displayed during
operation for reference.
The area or keys to touch are surrounded
with a red frame.
Playback starts.
Other search
When you want to narrow the list down,
there are other search ways.
Press the <MENU> button during
playback.
1
Simple Control screen appears.
Touch [
].
2
The search type screen appears.
NOTE
• The screens and panels shown in this
manual are examples used to provide clear
explanations of the operations.
For this reason, they may be different from the
actual screens or panels used, or some display
patterns may be different.
27
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Functions of the Buttons on the Front Panel
DNX7250DAB
8
9
1
2
3
4
5
6
7
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX7250DAB:
If above icon is showed, read the article applicable to the unit you use.
How to insert an SD Card
7
1) Press <0> button for 1 second.
Labelled
side
The panel fully opens.
2) Hold the SD card as the illustration in the right
and insert it into the slot until it clicks.
●To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
0
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
Name
Motion
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit
1
• If the Security Indicator (SI) function is turned on, this indicator flashes
∞, 5 (Vol)
• Adjusts volume.
2
NAV
• Displays the navigation screen.
3
• Pressing for 1 second switches AV out sources.
AUD
4
• Pressing for 1 second turns the screen off.
MENU
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
5
TEL
• Displays the Hands Free screen (P.72).
6
• Pressing for 1 second displays the Voice Recognition screen. (P.75)
0 (Eject)
• Ejects the disc.
7
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
Disc insert
slot
• A slot to insert a disc media.
8
SD card slot
• A slot to insert a microSD card. The card is used for upgrading the map.
For how to upgrade the map, refer to the instruction manual of the
navigation system.
9
Also, you can play audio/visual file in the card.
* The display may not switch to the Graphic Equalizer screen in some conditions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX5250BT
4
3
2
1
5
6
7
8
9
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX5250BT:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
4
1) Slide the Release key upward to detach the
part of the front panel.
1
2) Hold the microSD card with the label side facing
left and the notched section up, and insert it
into the slot until it clicks.
2
●To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
NOTE
• When detaching a part of the front panel, detach it
toward the front side as shown in the diagram right. If it
is detached upward, the front panel will be broken.
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
Name
Motion
Disc insert
slot
• A slot to insert a disc media.
• Ejects the disc.
1
0 (Eject)
2
• Pressing for 1 second ejects the disc forcibly.
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit
3
• If the Security Indicator (SI) function is turned on, this indicator flashes
Release key
MENU
• Detaches the part of front panel.
4
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
5
NAV
• Displays the navigation screen.
6
• Pressing for 1 second switches AV out sources.
∞, 5 (Vol)
• Adjusts volume.
7
TEL
• Displays the Hands Free screen (P.72).
8
• Pressing for 1 second displays the Voice Recognition screen. (P.75)
microSD card • A slot to insert a microSD card. The card is used for upgrading the map.
9
slot
For how to upgrade the map, refer to the instruction manual of the
navigation system.
Also, you can play audio/visual file in the card.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX525DAB
1
15
14
13
12
11
10
2
3
4
5
9
6
8
7
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX525DAB:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
8
1) Open the microSD card slot cover
as the illustration in the right.
2) Hold the microSD card with the label side
facing right and the notched section down,
and insert it into the slot until it clicks.
●To eject the card:
1) Push the card until it clicks and then remove
your finger from the card.
2) The card pops up so that you can pull it out
with your fingers.
NOTE
• When detaching a part of the front panel, detach it
toward the front side as shown in the diagram right. If it
is detached upward, the front panel will be broken.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
Name
Motion
0 (Eject)
• Ejects the disc.
1
• Pressing for 1 second ejects the disc forcibly.
MENU
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
2
NAV
• Displays the navigation screen.
3
4
5
6
• Pressing for 1 second switches AV out sources.
TEL
• Displays the Hands Free screen (P.72).
• Pressing for 1 second displays the Voice Recognition screen. (P.75)
AUDIO
• Pressing for 1 second turns the screen off.
Volume Knob • Turning adjusts volume up or down.
• Pressing switches attenuation of the volume on/off.
Reset
• If the unit or the connected unit fails to operate properly, the unit returns
7
microSD card • A slot to insert a microSD card. The card is used for upgrading the map.
8
slot
For how to upgrade the map, refer to the instruction manual of the
navigation system.
Also, you can play audio/visual file in the card.
APPS
• Switches to the Apps sources.
9
USB
• Switches to the disc media sources.
• Switches to the DAB sources.
10
11
12
13
14
15
DISC
DAB
Release key
• Detaches the part of front panel.
• A slot to insert a disc media.
Disc insert
slot
SI indicator
• If the Security Indicator (SI) function is turned on, this indicator flashes
* The display may not switch to the Graphic Equalizer screen in some conditions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX4250BT/DNX4250DAB
3
2
1
4
5
6
7
8
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX4250DAB, DNX4250BT:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
8
1) Open the microSD card slot cover
as the illustration in the right.
2) Hold the microSD card with the label
facing up and the notched section right,
and insert it into the slot until it clicks.
●To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
Name
Motion
Disc insert
slot
• A slot to insert a disc media.
• Ejects the disc.
1
0 (Eject)
2
• Pressing for 1 second ejects the disc forcibly.
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit
3
• If the Security Indicator (SI) function is turned on, this indicator flashes
MENU
NAV
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
4
• Displays the navigation screen.
5
• Pressing for 1 second switches AV out sources.
Volume Knob • Turning adjusts volume up or down.
• Pressing switches attenuation of the volume on/off.
6
TEL
• Displays the Hands Free screen (P.72).
7
• Pressing for 1 second displays the Voice Recognition screen. (P.75)
microSD
card slot
• A microSD card slot for upgrading the map. For how to upgrade the
map, refer to the instruction manual of the navigation system.
8
* The display may not switch to the Graphic Equalizer screen in some conditions.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on the Unit
The method of turning on is different depending on the model.
Press the <MENU> button.
1
DNX7250DAB
DNX5250BT
DNX525DAB
DNX4250DAB/ DNX4250BT
The unit is turned on.
● To turn off the unit:
Press the <MENU> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial setup
Set each item as follows.
1
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline unit are set.
After setting, touch [Enter].
1Touch [SET].
2Select the desired country.
3Touch [Enter].
Language
Select the language used for the control screen and setting items. Default is“British English (en)”.
1Touch [SET].
2Touch [2] or [3] to select the desired language.
3Touch [Enter].
Angle
Adjust the position of the monitor. Default is“0”.
1Touch [SET].
2Touch desired angle number and [6].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1Touch [SET].
2Touch [ON] or [OFF] of [Panel Color Scan].
3If you want to change color, touch [SET] of [Panel Color Coordinate].
4Touch your desired color and [6].
Continued
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera
Set the parameters for the camera.
1Touch [SET].
2Set each item and touch [
].
Touch [Finish].
2
NOTE
16
Download from Www.Somanuals.com. All Manuals Search And Download.
● To eject the disc:
Press the <0> button.
How to Play Media
Music CD and disc media
DNX7250DAB
Press the <0> button.
1
DNX525DAB
Insert the disc into the slot.
1
The panel opens.
Insert the disc into the slot.
2
The unit loads the disc and playback
starts.
● To eject the disc:
Press the <0> button.
The panel closes automatically.
The unit loads the disc and playback
starts.
● To eject the disc:
Press the <0> button.
DNX5250BT/
USB device
Insert the disc into the slot.
1
Connect the USB device with the
1
USB cable.
The unit reads the device and playback
starts.
The unit loads the disc and playback
starts.
● To disconnect the device:
Touch [0] on the screen and disconnect
the device from the cable.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX525DAB
Open the card slot cover.
iPod
Connect the iPod.
1
The unit reads the iPod and playback
starts.
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
● To disconnect the iPod/iPhone
connected with the cable:
Touch [
] on the screen and then touch
[0]. Disconnect the iPod from the cable.
SD card
NOTE
1
DNX7250DAB
Press the <0> button for 1
second to open the front panel.
Insert the card into the slot until
it clicks.
2
The unit loads the card and playback
starts.
● To remove:
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
0
DNX5250BT
Detach the front panel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu control screen:
External device (DNX5250BT)
2
Touch Menu display area to set the
menu of the TV tuner.
Insert the plug into the AV-IN jack.
1
CA-C3AV
(Optional Accessory)
Displays the menu/ Enters selected item
Touch [MENU/OK].
Moves the cursor
Touch [R], [S], [C], [D].
Exits menu control
TV tuner
You can connect the TV tuner (commercially
available) with this unit and watch TV.
Touch [Exit].
Before use
• When you use TV control function, connect the TV
tuner (commercially available) and set 3rd Party TV
• The TV tuner can be controlled with its supplied
remote control through the remote sensor on the
front panel of this unit.
Touch [TV] in the Top Menu
screen. (P.22)
1
1
2
1
3
1 Switching channel area
Touch to switch the channel.
2 Menu display area
Touch to display the Menu control screen.
3 Key display area
Touch to display the last control screen.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
● Attaching the front panel:
Detaching The Front
Panel
Hold the panel securely so as not to drop
it accidentally, and fit it onto the attaching
plate until it is firmly locked.
You can detach the front panel to prevent
theft.
1
1
DNX7250DAB
Press the <0> button for
1 second to open the front panel.
1
2
0
NOTE
• You can set the front panel to open automatically
when the ignition is turned off. See Monitor
Detach the panel as the diagrams
below.
2
3
2
1
4
NOTE
• The attaching plate closes automatically in about
10 seconds after the front panel is released.
Remove the panel before this happens.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX5250BT
DNX525DAB
Slide the Release key upward to
Slide the Release key rightward to
1
1
detach the part of the front panel.
Then, detach the panel as the
diagrams below.
detach the part of the front panel.
1
2
● Attaching the front panel:
Hold the panel securely so as not to drop
it accidentally, and fit it onto the attaching
plate until it is firmly locked.
2
● Attaching the front panel:
Hold the panel securely so as not to drop
it accidentally, and fit it onto the attaching
plate until it is firmly locked.
1
NOTE
1
• When detaching a part of the front panel, detach
it toward the front side as shown in the diagram
above. If it is detached upward, the front panel
will be broken.
2
• To prevent deterioration, do not touch the
terminals of the unit and faceplate with your
fingers.
• If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating with the Top Menu Screen
Most functions can be performed from the Top Menu screen.
Touch [Menu] on any screen.
1
NOTE
• If [Menu] is not
displayed during
video/picture
playback, press the
<MENU> button.
Top Menu screen appears.
NOTE
• Top Menu screen can
be changed by flicking
left or right.
Customizing mode screen
● Customizing Top Menu screen
You can arrange the position of the source
icons as you like.
1. Touch and hold the icon which you want
to move to go into the customizing
mode.
2. Drag it where you want to move.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
From this screen, you can perform the following functions.
Function
Icon
Operation
Switch the audio source
Touch the icon of the
desired source.
etc.
Switch the video source
Touch the icon of the
desired video source.
etc.
Switch the application
installed in the iPhone/
iPod or Android.
Touch the icon of the
desired application.
Switch the App source
Touch the icon of the
desired App source.
Enter setup mode
Touch the icon of the
desired setup function.
etc.
Display navigation
screen
Touch [NAV] or
navigation information.
or
Turn off all audio
function
Touch [STANDBY].
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
Introduces the common operations.
General
There are some functions which can be operated from most screens.
[Menu] (Screen control)
Returns to the Top Menu screen.
Touching for at least 1 second displays the
Screen Control screen. (Even when an image
is displayed, touching for at least 1 second
displays the Screen Control screen.)
(RETURN)
Returns to previous screen.
(common menu key)
Touch to display the common menu. The
contents of the menu are as follows.
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu
screen.
: Displays the control screen of current
source. Icon feature differs depending
on the source.
: Closes the menu.
List screen
There are some common function keys in the list screens of most sources.
(Scroll)
Scrolls the displayed text.
etc.
Touch keys with various functions are
displayed here.
Displayed keys differ depending on the
current audio source, status, etc.
For examples of functions of each key, refer
to the table below.
Key
Function
Lists all the music in the lower hierarchy.
Moves to the upper hierarchy.
Displays current category folder.
Displays music/picture/movie file list.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Flick scrolling
You can scroll the list screen by flicking the screen up/down or right/left.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation Operation
For details on the navigation function, please refer to the Navigation Instruction Manual.
Display the navigation screen
Press the <NAV> button.
1
DNX7250DAB
DNX525DAB
DNX5250BT
DNX4250DAB/ DNX4250BT
The navigation screen appears.
Control audio from the navigation screen
You can control audio sources while the navigation screen is displayed.
Also, you can view the navigation information while the source control screen is displayed.
Touch the information bar.
1
The navigation screen with audio information appears.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch [
] or [
] in the navigation screen.
2
Touching this area displays
the audio screen.
: Displays the navigation and control
keys of the current source.
: Displays the navigation and current
video/picture playback display.
NOTE
• The screen switches between playback screen
and camera view each time the viewing area is
touched.
• Touching the source icon in the bottom of the
screen displays the full audio screen.
● To return to the full navigation screen:
Touch [
].
NOTE
• For details on control keys, refer to the instructions in each section.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/Video CD (VCD) Operation
DVD/VCD Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode
• The screen shot below is for DVD. It may be different from the one for VCD.
Control screen
Video screen
1
6
6
5
2
3
4
7
8
1 Information display
Displays the following information.
• Title #, Chap #: DVD title and chapter number display
• Track #/Scene #: VCD track or scene number display
Scene # is displayed only when Playback control (PBC) is on.
• 3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast backward),
R
¢ (search up), 4 (search down), 7 (stop), (resume stop), 8 (pause),
(slow playback),
(slow reverse playback).
Touch this area to display the disc lable name.
2 Multi function key
3 Multi function menu
Various functions can be performed by using keys in this area. For details on the keys, see Multi
4 Control switching key
Unavailable in DVD/VCD source.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Sub function menu
The following functions can be performed by using keys in this area.
• Repeats the current content: Touch [
following sequence;
DVD: "title repeat"
]. Each time you touch the key, repeat mode switches in the
, "chapter repeat"
, "function off"
VCD (PBC On): Does not repeat
VCD (PBC Off): "track repeat"
, "function off"
• Hides all keys: Touch [
].
• Fast forward or fast backward: Touch [1] or [¡]. Each time you touch the key, the speed
changes; standard, 2 times, 3 times.
• Confirms play time: See #:##:##.
DVD: You can switch the time display between title play time, chapter play
time, and title remaining time. Each time you touch, the display switches
between“T #:##:##”(title play time display), “C #:##:##”(chapter play time
display), and“R #:##:##”(title remaining time display).
As well as the time display, the bar indicating current location appears.
VCD (PBC off): You can also confirm disc remaining time by touching time
display. Each time you touch, the display switches between“P
##:##”(play time display) and“R ##:##”(disc remaining time).
• Confirms the current location: See the bar in center (DVD only). The bar does not appear when the
time display is remaining time display.
6 Searching area
Touch to search the next/previous content.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
7 Menu display area
This area functions differently depending on the current status.
• During DVD playback: Displays the DVD menu. During the menu display, displays the highlight
control screen.
8 Key display area
Touch to display the last control screen.
NOTE
• If you use a remote control, you can jump directly to the desired image with entering the chapter number, scene
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
DVD
VCD
The functions of each key are as follows.
[4] [¢]
Searches the previous/next content.
[38]
Plays or pauses.
[
] or [ ] (DVD only)
Plays in slow motion forward or backward.
[7]
Stops playback. When touched twice, the disc is played from the beginning when you play it the next
time.
[PBC] (VCD only)
Turn Playback control (PBC) on or off.
[
SETUP]
AUDIO]
[ REAR
Touch to mute the rear speaker.
[
]
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Highlight control
DVD Disc Menu Operation
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
You can set up some items in the DVD-VIDEO
disc menu.
1 Touch illustrated area during playback.
1 Touch [Highlight] in the Menu Control
screen.
2 Touch desired item on the screen.
Menu Control screen appears.
2 Perform desired operation as follows.
NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.
Displays the top menu
Touch [Top].*
Displays the menu
Touch [Menu].*
Displays the previous menu
Touch [Return].*
Enters selected item
Touch [Enter].
Enables direct operation
Touch [Highlight] to enter the highlight control
Moves the cursor
Touch [5], [∞], [2], [3].
* These keys may not function depending on
the disc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD play mode setting
Zoom Control For DVD And VCD
You can select DVD play mode.
You can enlarge Playback screen for DVD and
VCD.
1 Touch [Next] in the Menu Control
screen.
1 For VCD, touch illustrated area during
playback.
Menu Control 2 screen appears.
Zoom Control screen appears.
2 Touch the key which corresponds to
desired setting item.
NOTE
(P.32) to display the Zoom Control screen.
2 Perform desired operation as follows.
Switches the subtitle language
Touch [Subtitle]. Each time you touch this key,
language is switched.
Switches the audio language
Touch [Audio]. Each time you touch this key,
language is switched.
Switches zoom ratio
Touch [Zoom].
For DVD, changes the zoom ratio at 4 levels;
Off, 2 times, 3 times, 4 times.
For VCD, changes the zoom ratio at 2 levels;
Off, 2 times.
Controls zoom ratio
Switches the picture angle
Touch [Angle]. Each time you touch this key,
picture angle is switched.
Scrolls the screen
Touch [5], [∞], [2], or [3] to scroll the screen
in the direction you touch.
Exits menu control
Touch [Exit].
Exits menu control
Touch [Exit].
Displays the Menu Control 1 screen
Touch [Previous].
Displays the previous menu*
Touch [Return].
32
Download from Www.Somanuals.com. All Manuals Search And Download.
* This function may not be performed
depending on the disc.
NOTE
• You cannot touch the menu keys directly on the
screen when zooming.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup
You can set up the DVD playback functions.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
• Some setup items can only be set in standby
mode.
1 Touch [
] in the control screen.
Multi function menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Menu/Subtitle/Audio Language*
Dynamic Range Control*
Sets the dynamic range.
Wide: The dynamic range is wide.
Normal: The dynamic range is normal.
Dialog (Default): Makes the total sound
volume larger than other
modes. This is effective only
when you are using Dolby
Digital software.
Source SETUP Menu screen appears.
4 Touch [DVD SETUP] in the list.
DVD SETUP screen appears.
Angle Mark
5 Set each item as follows.
Sets an angle mark display.
ON (Default): An angle mark appears.
OFF: An angle mark does not appear.
Screen Ratio*
Sets the screen display mode.
16:9 (Default): Displays wide pictures.
4:3 LB: Displays wide pictures in the Letter Box
format (having black stripes at the top
and bottom of screen).
4:3 PS: Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
Parental Level*
DISC SETUP
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Stream Information
Displays the present source information.
Language setup
This setting is for the language used in the
menu, subtitle, and voice. You cannot setup
these items during DVD playback.
The stream (Dolby Digital, Linear PCM, MPEG,
WMA or AAC) appears.
1 Touch [SET] of the desired item;
[Menu Language], [Subtitle Language],
[Audio Language].
* These items are disabled when a DVD is
inserted.
Language Set screen appears.
2 Enter the desired language code and
touch [Enter].
For language code, refer to DVD Language
Sets the entered language and returns to
the DVD SETUP screen.
NOTE
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• To set the DVD’s original language for audio
language, touch [Original].
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental level
Disc setup
Sets a parental level. You cannot setup this
item during DVD playback.
Performs setup when using disc media.
1 Touch [SET] of [DISC SETUP].
1 Touch [SET] of [Parental Level].
DISC SETUP screen appears.
Parental Pass screen appears.
2 Select an option as follows.
2 Enter the parental code and touch
[Enter].
Parental Level screen appears.
NOTE
• The parental code is set to“0000”as default.
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• Current parental level appears as [Level#].
CD Read
3 Touch [2] or [3] to select a parental
Sets the motion of this unit when a music CD
is played.
level.
1 (Default): Automatically recognizes and plays
back an audio file disc, a DVD or a music CD.
2: Forcibly plays back a disc as a music CD.
Select [2] if you wish to play a music CD having
a special format or if you cannot play a disc in
[1] position.
On Screen DVD
Sets an on-screen display.
Auto: When updated, information appears for
5 seconds.
OFF (Default): Information does not appear.
NOTE
• If a disc has higher parental lock level, you need
to enter the code number.
NOTE
• The parental lock level varies depending on a
loaded disc.
• [CD Read] is not available when a disc is in the
unit.
• If a disc has no parental lock, anybody can play it
back even when you have set the parental lock.
• You cannot play an audio file/VCD disc in the [2]
position. Also, you may not play some music CDs
in the [2] position.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/Audio and Visual Files/iPod/App Operation
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
• To connect the Android device with this unit, the cable (sold separately) and the profile which your Android
device supports are necessary as follows:
• To listen to music and watch video of APPS source
−MHL device
−KCA-MH100
−Bluetooth profile: SPP
• To listen to music of APPS source
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
• To listen to music of Bluetooth Audio source
−Bluetooth profile: A2DP
−Bluetooth profile: AVRCP
• To connect the iPod/iPhone with this unit, the cable, adapter (both sold separately), and the profile which your
iPod/iPhone supports are necessary as follows:
• To listen music and watch video with Lightning connector device
−Lightning Digital AV Adapter
−KCA-HD100
−Lightning to USB Cable (accessory of the iPod/iPhone)
−Bluetooth profile: SPP
• To listen music with Lightning connector device
−Lightning to USB Cable (accessory of the iPod/iPhone)
• To listen music and watch video with 30-pin connector device (1)
−Apple 30-pin Digital AV Adapter
−KCA-HD100
−KCA-iP102
−Bluetooth profile: SPP
• To listen music and watch video with 30-pin connector device (2)
−KCA-iP202
• To listen music with 30-pin connector device
−KCA-iP102
• To listen to music via Bluetooth
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
When connecting with Lightning Digital AV Adapter or Apple 30-pin Digital AV Adapter some applications can be
controlled from this unit. The operable functions depend on the application.
• Do not leave the cable or the adapter made by other makers inside the car. It might lead the malfunction caused
by heat.
• Some settings are necessary to meet the connected iPod/iPhone or Android device. Refer to iPod/iPhone
See the following sections for each source operation.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Music CD and disc media
NOTE
• In this manual, “Music CD”will be referred to as the general CDs which include music tracks in.
“Disc media”will be referred to as CD/DVD disc which includes audio, picture or video files.
• The screen shot below is for CD. It may be different from the one for disc media.
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 Information display
Displays the following information.
• Track #: Each time you touch this area, display switches between current track number, text, etc.
• 3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast
R
backward), ¢ (search up), 4 (search down), 7 (stop), (resume stop), 8
(pause).
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Multi function menu
Various functions can be performed by using keys in this area. For details on the menu, see Multi
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Track information
Displays the information of the current track.
For music CD and disc media, you can switch the current track information and the current folder list by
touching the list switching key (8 in this table).
However, only "No Information" is displayed for music CD.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
8 List switching key
Touch to switch between the track list and the CD-TEXT display (CD)/ID3 tag information (disc media
only).
Video screen (disc media only)
9
9
10 11
9 Searching file area (disc media only)
Touch to search the next/previous file.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
10 Menu display area (disc media only)
11 Key display area (disc media only)
Touch to display the last control screen.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device, SD card, and iPod
NOTE
• SD card is for DNX7250DAB, DNX5250BT and DNX525DAB only.
• The screen shot below is for USB device. It may be different from the one for iPod.
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 Information display
Displays the following information.
• Current file name: Each time you touch this area, display switches between file number/folder
number and file name.
• 3, ¡, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play, searching), 8 (pause), ¡ (forward
manual search), 1 (reverse manual search).
2 Artwork/Control switching area
The picture data is displayed if available from the current file. When the picture is not available, “No
Photo”is displayed.
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Multi function menu
Various functions can be performed by using keys in this area. For details on the keys, see Multi
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Contents list
Displays the list and contents. The contents of the list differ depending on the playback status and
source.
When you select the video source on the device connected with the Lightning connecter, the source is
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
8 List switching key
Touch to switch between the file list and the current file information.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture/video screen
9
9
10
9 Searching file area (picture/video file only)
• Touch to search the next/previous file.
• During slide show in USB mode and SD card mode, touching each area searches the next/previous
music file.
• Scrolling from center of display to left or right performs fast backward or fast forward. To stop fast
backward/forward, touch center of the display. This function is not available when there is no music
file in the current folder.
10 Key display area (picture/video file only)
Touch to display the last control screen.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
Music CD
Disc media
iPod
USB device and SD card
The following functions can be performed by using keys in this area.
] (Disc media, iPod, USB device, and SD card only)
[
[4] [¢]
Searches the previous/next track/file.
[3] [8] / [38]
Plays or pauses.
[7] (music CD and disc media only)
Stops playback.
[0] (iPod and USB device, and SD card only)
[
] [
Searches previous/next folder.
] (picture files in USB device and SD card only)
During picture playback, switches to picture display.
SETUP]
AUDIO]
[ REAR
Touch to mute the rear speaker.
] (Disc media, USB device, and SD card only)
[
[
[
]
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Sub function menu
Music CD
Disc media
iPod
USB device and SD card
The following functions can be performed by using keys in this area.
[
]
Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following
sequence;
CD: "track repeat"
, "repeat off"
iPod: "song repeat"
, "all songs repeat"
, "repeat off"
Disc media, USB device: "file repeat"
, "folder repeat"
, "repeat off"
[
] (USB device, iPod, and SD card only)
Searches track from the album artwork list. For details on search operation, see Search from album
[
] (During video file playback only)
Hides all keys.
[1] [¡] (Music CD and disc media only)
Fast forward or fast backward.
[
] [
] (USB device, iPod, and SD card only)
#:##:## or ##:##
Confirms play time.
During music CD playback, you can also confirm disc remaining time by touching time display.
Each time you touch, the display switches between“P ##:##”(track play time display) and“R ##:##”(disc
remaining time).
[
]
Randomly plays all tracks in current folder/disc or in current playlist in the connected iPod.
Each time you touch the key, random mode switches in the following sequence;
CD: "track random"
Disc media, USB device, SD card: "file random"
iPod: "track random" , "album random" , "random off"
, "random off"
, "random off"
Status bar in center (USB device, iPod, and SD card only)
Confirms the current location.
During USB device, iPod playback, and SD card, you can drag the circle left or right to change the
playing position.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Other search
Search Operation
When you want to narrow the list down,
there are other search ways.
You can search music, video or picture files
by the following operations.
This function is not available when music CD
is the current source.
NOTE
• If you use a remote control, you can jump directly
to the desired track/file with entering the track/
folder/file number, play time, etc. For details, see
1 Touch [
] in the control screen.
The search type screen appears.
2 Touch desired search way.
USB device and SD card
List search
You can search tracks, folders, and files
according to hierarchy.
1 Touch illustrated area.
iPod
List Control screen appears.
2 Touch desired track/file.
The list sorted in the way you selected
appears.
See the following sections for each
operation.
• [Category List]: You can search a file by
• [Link Search]: You can search a file of
same artist/album/genre/composer as the
Playback starts.
NOTE
• For disc media, you can switch the file list and
• [Folder List]: You can search a file according
folder list by touching [
].
• For disc media, you cannot display the list during
random play and stop.
• [Thumbnail Viewer]: You can search a
NOTE
• For disc media, you can display the folder list
directly by touching [
].
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Category search (USB device, iPod, and SD
card only)
Link search (USB device, iPod, and SD
card only)
1 Touch the desired category from the
1 Touch the desired item from the left
part of the screen. You can select from
artist, album, genre and composer.
left part of the screen.
2 The list is sorted by selected category.
The list corresponding to your selection
appears.
3 Touch desired item.
Playback starts.
NOTE
• The list is sorted by the way you selected.
NOTE
• To narrow the search you can select a letter from
• artist: Displays the album list of the artist.
the alphabet list in the center of the display.
• album: Displays all tunes of the current album.
• genre: Displays the artists list in which artists
belong to the same genre.
• composer: Displays the album list of the
composer of the current file.
2 Touch to select desired item in the
list. Repeat this step until you find the
desired file.
NOTE
• To narrow the search you can select a letter from
the alphabet list in the center of the display.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder search (USB device, disc media,
and SD card only)
Picture search (USB device and SD card
only)
1 Touch the desired folder.
1 Touch the desired picture.
Folders in the selected source are displayed
in the center.
When you touch a folder its contents are
displayed.
The selected picture appears in full screen.
See number 9-10 in USB device, SD card,
and iPod (P.41) for operation of picture
screen.
The hierarchy till the current folder is
displayed on the left.
2 Touch desired item from the content
list.
Playback starts.
NOTE
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Touch [ 3 ] on the selected artwork.
Search from album artwork
(USB device, iPod, and SD card
only)
The first song in the album is played.
In addition, you can create your original
playlist from this screen. For details, see
You can search music files by selecting the
album artwork.
NOTE
1 Touch [
].
• After all tracks in the album are played, the same
album is played again from the first track.
Sub function menu appears.
• The albums with no photo are not displayed.
2 Touch [
].
Favorite screen appears.
3 Touch desired artwork in the lower line.
NOTE
• The key in the upper side of the screen functions
differently depending on the status.
When [Load Albums] appears:
You have not yet loaded any artworks. Touch the
key to start loading.
When [Load More Albums] appears:
Some artworks are not loaded. Touch the key to
load all artworks. If you touch the key, the track
being played may stop and another track may
start playback.
When the key does not available:
All artworks are already loaded.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite list
NOTE
You can create an original playlist of your
favorite 10 albums by selecting album
artworks.
• The favorite list is played to the right starting with
the selected album.
• To delete the album from the favorite list, touch
and drag it to the lower line.
1 Touch and drag the desired album
artwork in the lower line to the upper
line.
• You can change the playing order of the favorite
list by dragging the artwork in the list.
• The favorite list mode is canceled in the following
situations.
• Playing another album from other list (folder list,
category list, etc.)
• Playing another album by touching the artwork
in the lower line in the artwork list screen.
• The favorite list mode resumes after
disconnecting/connecting the device or turning
on/off. File being played, playing time code,
favorite list contents, favorite list order, etc.
resumes if file configuration of the device is not
changed.
Selected album is registered to the favorite
list.
NOTE
• The added album is placed on the extreme right.
• You cannot register the same album already
registered to the favorite list.
• Up to 10 albums can be registered to the list.
2 Touch the desired artwork in the
favorite list.
Selected album is played and the control
screen appears.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Control
You can adjust the movie playback from a
disc media.
1 In the playback screen, touch
illustrated area.
Movie Control screen appears.
2 Perform desired operation as follows.
Changes subtitle language
Touch [Subtitle].
Changes audio language
Touch [Audio].
Exits the menu
Touch [Exit].
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Aha Operation
You can listen to the Aha on this unit by controlling the application installed in the iPhone or
Android.
To enter Aha mode, touch [aha] icon in the Top Menu screen.
NOTE
iPhone: Search for "Aha" in the Apple App Store to find and install the most current version.
Android: Search for "Aha" in the Google play to find and install the most current version.
• When you first select Aha as a source, the setting screen for the connection with the device installed the apps will
Content List screen
Text information screen
1
5
2
2
3
4
6
3
4
6
1 Content information
Displays the content of the current station being played.
2 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
3 Multi function key
4 Multi function menu
Various functions can be performed by using the keys in this area. For details on the keys, see Multi
5 Text information
Displays the information of the current content being played.
6 List switching key
Touch to switch between the content list and the text information of current content.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi function menu
Sub function menu
The following functions can be performed by
using keys in this area.
The following functions can be performed by
using keys in this area.
[
]
[
]
Searches for a station. For details on searching,
Sets the content backward 15 seconds.
[
]
[4] [¢]
Searches the previous/next track.
Sets the content forward 30 seconds.
[
]
[38]
Plays or pauses.
Sets the received location information at
the destination of navigation. See Navigate
[
]
[
]
Touching the key "dislikes" current content.
Posts the location information to Facebook.
[
]
[
]
Touching the key "likes" current content.
Redelivers by Twitter.
[
]
Dials the received telephone number.
NOTE
• [SETUP] and [AUDIO] functions same as iPod.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Station list screen
Navigate
You can perform the following functions
from this screen.
Sets the location information received from
Aha at the destination of navigation.
1 Touch [
] in the control screen.
Selects the station
Touch the station name in the list.
[
]
Saves the location information.
NOTE
[Go!]
• You cannot select iPod as rear source when
you select Aha as main source in dual zone
function.
Sets the location information at the destination
and starts navigation.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Apps Operation
You can listen to music or watch video from the Apps operating on iPod touch/iPhone or Android.
To enter Apps mode, touch [APPS] icon in the Top Menu screen.
NOTE
• When you turn on the power and select apps as the source, the caution for the operation, watching video and
listening music appears. With your acceptance, you can control apps, listen to music and watch video from apps
when you are driving.
• When you first select APPS as a source, the setting screen for the connection with the device installed the apps
3
1
2
1 Multi function key (iPod touch/iPhone only)
Touch to switch the multi function menu.
2 Multi function menu (iPod touch/iPhone only)
The following functions can be performed by using keys in this area.
• Plays or pauses: Touch [3], [8], or [38] (iPod only).
• Searches the previous/next track/file: Touch [4] or [¢].
• Fast forward or fast backward (iPod only): Touch [1] or [¡].
3 Sub function menu (iPod touch/iPhone only)
The following functions can be performed by using keys in this area.
• Hides all keys (During video file playback only): Touch [
]
NOTE
• The operable functions depend on the application.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
USB/SD setup
USB/SD/iPod/DivX Setup
You can perform setup when using USB/ SD/
iPod/ DivX.
NOTE
• The screen shot below is for USB device. However,
the setting items of USB and SD setup are quite
the same.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see Operating
1 Set each item as follows.
• Some setup items can only be set in standby
mode.
1 Touch [
] in the control screen.
Multi function menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
On Screen USB/On Screen SD
Sets how to display the information of the USB
device or SD card.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
Source SETUP Menu screen appears.
4 Touch [USB SETUP], [SD SETUP], [iPod
SETUP], [APPS SETUP], or [DivX SETUP]
in the list.
Each setup screen appears.
See the following section for each setting.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone connection setup
iPod setup
1 Touch [iPod Connection Setup] in the
1 Set each item as follows.
iPod Settings screen.
iPod connection setup screen appears.
2 Touch [CHANGE].
AudioBook Speed
Sets the audio book playback speed. Select
from [Slow], [Normal] (default), and [Fast].
3 Select the way to connect the iPod/
Wide Screen*
iPhone with this unit.
Sets Wide Screen. Set [ON] (default) or [OFF].
On Screen iPod
Sets how to display the information of the
iPod.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
iPod connection setup
Sets the way to connect the iPod/iPhone with
this unit For details on searching, see iPod/
iPhone connection setup (P.56).
USB + AV-IN
Select when connecting with KCA-iP202.
USB 1Wire
Select when connecting with KCA-iP102/
Lightning to USB Cable.
* This setting is not available when an iPod is
connected.
HDMI + BT
Select when connecting with KCA-HD100 and
Lightning Digital AV Adapter or Apple 30-pin
Digital AV Adapter.
Bluetooth
Select when connecting via Bluetooth only.
4 Touch [Next].
Confirmation screen appears.
5 Touch [Done].
56
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
• When you select“HDMI + BT”or“Bluetooth”in
step 3, Bluetooth device selection screen will
appear. Select the iPod/iPhone to be connected.
If a connectable Bluetooth device is not
displayed, touch [Search] and do the pairing of
the devices.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select the way to connect the device
Application link setup
with this unit.
Sets the device an application is installed in
and the app is selected as the source.
1 Touch [CHANGE].
When selecting [iPod / iPhone]
USB + AV-IN
Select when connecting with KCA-iP202.
2 Select the device installed the apps.
USB 1Wire
Select when connecting with KCA-iP102/
Lightning to USB Cable.
HDMI + BT
Select when connecting with KCA-HD100 and
Lightning Digital AV Adapter or Apple 30-pin
Digital AV Adapter.
Bluetooth
Select when connecting via Bluetooth only.
iPod / iPhone
When selecting [Android / Other]
Select when using iPod/iPhone.
HDMI/MHL + BT
Android / Other
Select when connecting with KCA-MH100.
Select when using Android or BlackBerry
device.
Bluetooth
Select when connecting via Bluetooth only.
3 Touch [Next].
5 Touch [Next].
Connection setup screen appears.
Confirmation screen appears.
6 Touch [Done].
58
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX(R) VOD
NOTE
• This setup can be set when in STANDBY source.
1 Set each item as follows.
• For the details of the necessary cable and adapter
to connect with iPod/iPhonea and Android,
refer to Music/Video/Picture Basic Operation
• When you select“HDMI + BT”, “HDMI/MHL +
BT”or ”Bluetooth”in step 4, Bluetooth device
selection screen will appear. Select the device to
be connected.
DivX(R) Registration Code
Checks the registration code. This code is
needed when making a disc which has DRM
(Digital Rights Management).
DivX(R) Deactivation
If a connectable Bluetooth device is not
displayed, touch [Search] and do the pairing of
the devices.
Deregisters the unit which is already registered.
After you touch the key, a confirmation
message appears. Follow the message and
complete the operation.
• When you select“iPod/ iPhone”in Apps Setup,
select“iPod”as the source, and select App on the
iPod, the source of this unit is also changed to
App automatically.
NOTE
• [DivX(R) VOD] is disabled when a disc is being
played.
• When downloading a DivX VOD file controlled
by DRM, register the code appeared on the
screen. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is
displayed when playing a DivX VOD file with the
viewing restriction. When the used number of
viewing reached maximum number, a warning
message appears and the file cannot be played.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
Simple Control screen
List Control screen
2
6
7
1
2
3
4
5
3
4
8
1 PS/Station name display
Displays the PS name.
2 Information display/Control switching area
Displays the following information.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
5 Sub function key
Touch to display“Sub function menu”(7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed.
Multi function menu
The functions of each key are as follows.
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
[
]
[TI] (FM Tuner only)
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
[PTY] (FM Tuner only)
[MONO] (FM Tuner only)
Select the Monaural reception.
[LO.S] (FM Tuner only)
Turns the Local Seek function on or off.
[
SETUP]
AUDIO]
[ REAR
Touch to mute the rear speaker.
[
]
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Radio Basic Operation
(DNX7250DAB, DNX525DAB, DNX4250DAB only)
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
List Control screen
Simple Control screen
7
1
6
1
5
2
3
4
1 Artwork area
The picture data is displayed if available from current content.
2 Multi function key
3 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
4 List switching key
Touch to switch between the preset list and the information list.
5 Sub function menu
The following functions can be performed by using keys in this area.
• Display the list type screen: Touch [
]. See Selecting Operation (P.65).
• Tunes in a ensemble, service, and component:
Touch [1] [¡]. The method of ensemble, service, and component switching can be changed. See
• Display the Dynamic Label Segment screen: Touch [DLS].
• Change the Replay mode: Touch [
6 Label infomation
Displays the list of preset service.
Displays the information of the current service: Service Label, PTY Label, Ensemble Label, Audio Quality,
Now playing, Next program, Title, Artist
62
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Signal Strength indication/Channel display
Displays the received signal strength of the Digital Radio station.
Displays the received channel number display.
Multi function menu
The functions of each key are as follows.
[
]
Switches the preset number.
[P1] - [P15]
Selects the preset ensemble. Touch for 2 seconds to store the current ensemble into the preset
memory.
[TI]
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a ensemble with good reception automatically.
• AUTO2: Tunes in ensemble in memory one after another.
• MANUAL: Switches to the next ensemble manually.
[PTY]
Searches a program by setting program type. For details, see Search by program type (P.66).
[ REAR
Touch to mute the rear speaker.
SETUP]
AUDIO]
]
[
[
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual memory
Memory Operation
Auto memory
You can store the current receiving station in
memory.
1 Select a station you wish to store in
You can store stations with good reception in
memory automatically.
memory.
This function is for radio only.
2 Touch [P#] (#:1-6, 1-15) in which you
want to store the station for 2 seconds
until a beep sounds.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
1 Touch [
].
Sub function menu appears.
2 Touch desired band key.
3 Touch [
] in the control screen.
The multi function menu appears.
4 Touch [AME] in the multi function
menu.
5 Touch [1] or [¡] in the sub function
menu.
Auto memory starts.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
List select
Selecting Operation
Preset select
You can select an ensemble from a list of
memorized ensembles or select a service
from a list of all services received.
You can list and select memorized station or
channel.
1 Touch [
] in the control screen.
The multi function menu appears.
Selecting from the multi function menu
2 Touch [
] in the multi function menu.
The list type screen appears.
1 Touch the desired number from P1 to
P6/P15.
The unit will tune to the selected station or
channel.
3 Touch desired list way.
Selecting from the preset list
1 Touch illustrated area.
List screen appears.
4 Select a service from the list.
List Control screen appears.
2 Select a station or channel from the list.
NOTE
• Touching [
] and then [Preset List] displays
the preset channel list. You can also select your
desired channel from the list.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Search by program type
Traffic Information
You can tune to a station with a specific
program type when listening to FM/ Digital
Radio.
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio Data
System and Digital Radio that includes the TI
information.
1 Touch [
] in the control screen.
The multi function menu appears.
2 Touch [PTY] in the multi function menu.
1 Touch [
] in the control screen.
The multi function menu appears.
PTY Mode screen appears.
3 Select a program type from the list.
4 Touch [Search].
2 Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
You can search a station of the selected
program type.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Replay (Digital Radio only)
You can replay last 30 minutes of current
station.
1 Touch [
] in the sub function menu.
[4] [¢]
Forward/backward 15 seconds when touch it.
[38]
Plays or pauses.
[1] [¡]
Fast forward/fast backward when keep on
touching.
Replay time bar
Display recorded capacity
[
]
Change the Live mode
NOTE
• PTY Watch starts operating and Replay function
cannot be used while receiving a program.
• While replaying the current station, you can not
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto TP Seek
Tuner Setup
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is“ON”.
Language Select
You can set tuner related parameters.
1 Touch [
] in the control screen.
Multi function menu appears.
Selects a display language for the PTY function.
2 Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3 Touch [Source].
Source SETUP Menu screen appears.
4 Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5 Set each item as follows.
NEWS
Sets a news bulletin interrupt time. Default is
“OFF”.
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is“ON”.
Regional
Sets whether to switch to the station only
in the specific region using the“AF”control.
Default is“ON”.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY Watch
Digital Radio Setup
If the service of the set program type begins
with the ensemble being received, switches
from any source to Digital Radio for service
reception.
You can set Digital Radio related parameters.
1 Touch [
] in the control screen.
Multi function menu appears.
Announcement Select
Switches to the set Announcement service. For
Seamless Band
Prevents audio break when switching from
Digital Radio to Analog Radio. Default is“ON”.
Antenna Power*
2 Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3 Touch [Source].
Sets power supply to the Digital Radio
antenna. Set to“ON”when the Digital Radio
antenna in use is equipped with a booster.
Default is“ON”.
L-Band Tuning*
Sets L-band reception. When set to“ON”, also
receives L-band ensembles.
* This item can be set when in STANDBY
source.
Source SETUP Menu screen appears.
4 Touch [Digital Radio SETUP] in the list.
Digital Radio SETUP screen appears.
5 Set each item as follows.
Priority
If the same service is provided by Digital
Radio during Radio Data System reception,
automatically switches to Digital Radio. If the
same service is provided by Radio Data System
when reception of the service being provided
by Digital Radio becomes poor, automatically
switches to Radio Data System.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Announcement setup
When the service for which ON is selected
starts, switches from any source to
Announcement to receive it.
1 Touch [SET] of [Announcement Select]
in the DAB SETUP screen.
The Announcement Select screen appears.
2 Touch each Announcement list and set
on or off.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Control
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.
Registering And Connecting
Bluetooth Unit
It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
About the cell-phone and
Bluetooth audio player
You can register up to 5 Bluetooth units.
This unit conforms to the following
Bluetooth specifications:
1 Touch [Menu] on any screen.
2 Touch [SETUP].
Version
Bluetooth Ver. 3.0+EDR Certified
SETUP Menu screen appears.
3 Touch [Bluetooth].
Profile
Cell-phone:
HFP (V1.6) (Hands Free Profile)
SPP (Serial Port Profile)
SDP (Service Discovery Profile)
PBAP (Phonebook Access Profile)
GAP (Generic Access Profile)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (V1.4) (Audio/Video Remote Control
Profile)
Bluetooth SETUP screen appears.
See the following section for each setting.
Sound codec
SBC, AAC, MP3, aptX (DNX7250DAB only)
NOTE
• For the cell-phones verified for compatibility,
access the following URL:
http://www.kenwood.com/cs/ce/bt/.
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering the Bluetooth Unit
Connecting the Bluetooth unit
1 Touch the device name you want to
1 Touch [Search].
Searched Device List screen appears.
connect.
Profile select screen appears.
NOTE
NOTE
• You cannot register the Bluetooth unit when you
• If the icon is lighted, it means that the unit will
use that device.
are using the following sources:
iPod, Bluetooth Audio, APPS, aha
If you want to register the Bluetooth unit while
using one of the above mentioned sources, send
the connection request from the Bluetooth unit
and register it.
2 Set each profile as follows.
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See Connecting the Bluetooth unit
• The Searched Device List screen cannot be
displayed, when the receiving source is aha or
Bluetooth Audio.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
TEL (HFP)
Means that the device is a cell-phone.
Audio (A2DP)
Means that the device is an audio player or
cell-phone with audio player.
2 Select the Bluetooth unit to register
from the list.
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
• Touching [Remove] of [Device Remove Confirm]
removes registration information. After you touch
the key, a confirmation message appears. Follow
the message and complete the operation.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• A Bluetooth device cannot be searched while the
source is aha, iHeartRadio, or Bluetooth audio.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
3 Enter PIN code form the cell-phone.
Profile select screen appears.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Bluetooth Audio Device
Bluetooth basic operation
Simple Control screen
List Control screen
1
5
4
2
3
2
3
1 Information display
Displays the name of the track information. If the information is not available, device name is displayed.
2 Multi function key
Touch to switch the multi function menu.
3 Multi function menu
The functions of each key are as follows.
• [4] [¢]: Searches the previous/next content.*
• [3]: Plays.*
• [8]: Pauses.*
• [7]: Stops playback.*
• [ REAR ]: Touch to mute the rear speaker.
4 Control switching area
Touch to switch between the Simple Control and List Control screen.
5 File information
Displays the information of the current file.
* These items appear only when the audio player which supports AVRCP profile is connected.
NOTE
• If the operation keys do not appear, operate from the player.
• Depending on your cell-phone or audio player, audio may be heard and controlled but text information may not
appear.
• If the volume is too low, raise it on your cell-phone or audio player.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select a dialing method.
Using Hands-Free Unit
You can use telephone function by
connecting the Bluetooth telephone to this
unit.
Making a call
1 Press the <TEL> button.
DNX525DAB
See the following table for each method.
Call by entering a phone number
1Touch [
2Enter a phone number with number keys.
3Touch [ ].
Call using call records
1Touch [ ], [ ], or [
2Select the phone number from the list.
3Touch [ ].
Call using the phonebook
1Touch [ ].
].
DNX5250BT
].
2Select the name from the list.*1*2
Hands Free screen appears.
3Select the number from the list.
4Touch [
].
NOTE
Call using the preset number
• When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
1Touch [Preset #] to start calling the
corresponding phone number.
• Up to 600 phone numbers can be registered for
each registered cell-phone.
2Touch [
].
• Up to 30 digits can be registered for each
phone number along with up to 127 characters
representing a name. (127 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
Continued
75
Download from Www.Somanuals.com. All Manuals Search And Download.
*1 You can sort the list to begin with touched
character.
Receiving a call
1 Touch [ ] to answer a phone call or
[
] to reject an incoming call.
• Characters with no corresponding name
will not appear.
• During search, a non-accent character
such as “u” is searched for instead of an
accent character such as “ü”.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.
*2 You can set the list to arrange in the order
of last name or first name. For details, see
NOTE
• If you edited the phonebook in your cell-phone,
touch“Download”on top of the phonebook list in
this unit to download it from your cell-phone. The
phonebook in this unit will be updated with the
latest downloaded data.
• While your car is moving, some functions are
disabled for safety reasons. The keys associated
with the disabled functions become ineffective
if touched.
• The status icons such as battery and antenna
displayed may differ from those displayed on the
cell-phone.
• Setting the cell-phone in the private mode can
disable the hands-free function.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations during a call
Call-waiting
When you receive a call while talking on
another call, you can answer the newly
received call by touching [ ]. The current call
is on hold.
Adjust the receiver volume
DNX7250DAB
Press the <∞> or <5> button.
Each time you touch [ ], the caller will
change.
When you touch [
], the current call will end
and switch to the call in hold.
DNX5250BT
Press the <∞> or <5> button.
DNX525DAB
Turn the volume knob.
DNX4250DAB, DNX4250BT
Turn the volume knob.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Switching the speaking voice output
Touching [
]/ [
] each time
switches the speaking voice output between
cell-phone and speaker.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone number preset
Voice Recognition
You can register frequently used phone
numbers to this unit.
You can access the voice recognition function
of the cell-phone connected to this unit.
You can search the cell-phone phonebook
by voice. (The functionality depends on the
cell-phone.)
1 Enter the number you want to register
in Hands Free screen.
1 Press the <TEL> button for 1second.
DNX525DAB
Press for 1 second
Press for 1 second
2 Touch [Preset 1], [Preset 2], or [Preset 3]
DNX5250BT
for 2 seconds in the Hands Free screen.
Press for 1 second
Press for 1 second
Voice Recognition screen appears.
2 Start speaking.
NOTE
• You can use voice recognition function by
touching [
] on the Hands Free screen.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Smartphone Link
You can receive Garmin’s traffic information
and weather forecast by connecting
your Android smartphone in which the
Smartphone Link application is installed to
this unit.
1 Press the <NAV> button.
DNX525DAB
DNX5250BT
Navigation screen appears.
Touch [Apps] on the Main Menu screen and
then an icon of your desired content
For details, see Navigation system manual.
NOTE
• Install the latest version of the Smartphone Link
application on your Android.
Search for“Smartphone Link”in the Google play
to find and install the most current version.
• For how to register the Bluetooth device
79
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Set each item as follows.
Hands-Free Setup
You can perform various setup about
handsfree function.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Bluetooth].
Bluetooth SETUP screen appears.
Bluetooth HF/Audio
Select the speakers to output the sound from
cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
4 Touch [TEL SET-UP] in the Bluetooth
SET-UP screen.
Front Only: Outputs from the front speakers.
All (Default): Outputs from all speakers.
Auto Response*
Sets an automatic response time to pick-up an
incoming call.
OFF (Default): Automatic response is not
available.
0-99: Set calling ring time (second).
Auto Pairing
Hands-free SETUP screen appears.
When set to“ON”, the Apple Auto Pairing
function is turned on to automatically register
the iPod touch or iPhone connected to this
unit.
ON (Default): Uses Apple Auto Pairing
function.
OFF: Not uses Apple Auto Pairing function.
Phone Information Use
Sets whether to use phonebook, outgoing,
incoming and missed calls list.
ON (Default): Yes.
OFF: No.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Sort Order
Sets how to arrange the cell-phone
phonebook.
First: Arranges in the order of first name.
Last (Default): Arranges in the order of last
name.
Echo Cancel Level
Adjusts the level of echo cancellation.
Default is“0”.
Microphone Level
Adjusts the sensitivity of the telephone
microphone. Default is“15”.
Noise Reduction Level
Reduces the noises generated by surrounding
environment without changing the
microphone volume. Use this setting when the
voice of caller is not clear. Default is“-10”.
[Restore]
Resets the settings to the default settings.
* Either the time interval for automatic
answer set on this unit or the time interval
set on the cell-phone, whichever is shorter
takes effect.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Monitor Screen Setup
Bright / Tint* / Color* / Contrast / Black /
Sharpness*
You can adjust image quality in iPod video,
picture file, menu screen, etc.
Adjusts each item.
Dimmer
1 Touch the lower left area of any screen
Select dimmer mode.
ON: The display and buttons dim.
OFF: The display and buttons do not dim.
for at least 1 second.
SYNC (Default): Turns the dimmer function on
or off when the vehicle light
control switch is turned on
or off.
NAV-SYNC: Turns the dimmer function on or
off according to the Navigation
Day/Night display setting.
Mode* (except USB/SD)
Select screen mode.
Full: Full picture mode
Screen Control screen appears.
2 Adjust each item as follows.
iPod/ AV-IN/ Camera
Just: Justify picture mode
Zoom: Zoom picture mode
Normal: Normal picture mode
DVD/ USB/ SD
* Playback screen only
NOTE
• Adjusting items are different depending on the
current source.
• You can perform this function only when you
have applied the parking brake.
• The image quality can be set for each source.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
View Camera Control
You can set up display when a CMOS-3xx
Series view camera is used.
NOTE
• Each operation in this section can be started from
the multi function menu.
1 Press the <AUD> button for 1second.
1 Touch [Menu] on any screen.
TOP Menu screen appears.
2 Touch [SETUP].
3 Touch [System].
Camera view screen appears.
2 Adjust each item as follows.
System Menu screen appears.
See the following section for each setting.
1
2
3
1 Guideline
Touching each time turns on or off the
guideline display alternately.
2 Switching the View Camera
Touching each time changes between the
front view camera and rear view camera.
3 Angle
Touching each time changes camera angles in
the following order:
Super wide view/ Wide view/ Overhead view/
Wide view + Top view/ Corner view
NOTE
• The video camera controls described above
may not be operable depending the connected
cameras.
• [AUD Key Longer than 1 Second] must be set to
83
Download from Www.Somanuals.com. All Manuals Search And Download.
AUD Key Longer than 1 Second
(DNX7250DAB/ DNX525DAB)
You can set the operation performed when the
AUDIO key is pressed for 1 second. Select from
”V.OFF”/”R-CAM”/”CAM”.
V.OFF (Default): Turn the display off.
R-CAM (DNX525DAB)
User interface
You can setup user interface parameters.
1 Touch [User Interface] in the list.
User Interface screen appears.
2 Set each item as follows.
:
Switches to the rear view camera video
display
CAM (DNX7250DAB)
Switches to the front/ rear view camera video
display
.
2
*
:
.
TEL Key Longer than 1 Second
(DNX5250BT/ DNX4250DAB/ DNX4250BT)
You can set the operation performed when
the TEL key is pressed for 1 second. Select from
“Voice”/”V.OFF”/”R-CAM”.
Beep
Voice (Default): Displays the Voice Recognition
Turns the key touch tone on or off.
Default is“ON”.
V.OFF: Turn the display off.
R-CAM: Switches to the rear view camera video
Language
Select the language used for the control
screen and setting items. See Language setup
display
.
Animation
Sets whether to display animation. Default is“ON”.
Text Scroll
Allows scrolling of text display on the source
control screen. Select from“Auto”/”Once”/”OFF”.
Auto (Default): Scrolls the text automatically.
Secondary
Sets whether to display the navigation
information in the audio screen or vice versa.
Default is“ON”.
Once: Allows you to scroll the text only once
automatically when updated.
OFF: Does not scroll the text automatically.
Drawer Close
Sets whether to close the common menu
Vehicle Information*1
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
Beep for Parking distance control*1
(DNX525DAB)
Sets whether to generate a warning tone
when the onboard proximity sensor detects a
human or object.
Consult your Kenwood dealer for details.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Language setup
USB Key Setting(DNX525DAB)
Sets the source to switch to when the <USB>
button is pressed.
1 Touch [SET] of [Language] in the User
Interface screen.
USB (Default): Switches to the USB source.
iPod: Switches to the iPod.
Language Setting screen appears.
2 Set each item as follows.
*1 This setting is available when a
commercial adaptor is connected.
*2 When you set [Front Camera] to OFF,
the display will change to the rear view
camera and when you set it to “CMOS-
3xx”/ “Other”, the display will change to
the front view camera. See Camera Setup
Select Mode
Selects the mode to select a language.
Easy (Default): Selects a language easily.
Advanced: Allows you to select languages for
respective items.*
Language Select
Selects a language.
* If you select [Advanced] for Select Mode,
the following screen appears.
GUI Language Select:
Selects the display language used for the
control screen and so forth.
Navigation Language Select:
Selects the language used for navigation.
Text Language Select:
Selects the language used for tag text (song
information).
3 Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch panel adjustment
Security setup
You can set up a security code to protect
your receiver system against theft.
1 Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
NOTE
• When the Security Code function is activated, the
code cannot be changed and the function cannot
be released. Note the Security Code can be set as
the 4 digit number of your choice.
2 Follow the instruction on the screen
and touch the center of each
.
1 Touch [Security] in the System Menu
screen.
Security screen appears.
2 Touch [ON] of [SI].
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
NOTE
• DNX7250DAB, DNX5250BT, DNX525DAB
If“SI”is turned on, the SI indicator on the front
panel flashes when the panel is detached. Default
is“ON”.
• DNX4250DAB, DNX4250BT
If“SI”is turned on, the SI indicator on the front
panel flashes when the vehicle ignition is off.
Default is“ON”.
3 Touch [SET] of [Security Code Set].
NOTE
• If you have already completed the code
registration, [CLR] is displayed.
4 Enter a security code with four-digit
number and touch [Enter].
5 Enter the same code again and touch
[Enter].
Security code is registered.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
• If you enter a different security code, the screen
returns to step 4 (for the first code entry).
• If you have pressed <Reset> button or if you
have disconnected the Receiver from battery,
enter the correct security code as that you have
entered in step 4 and touch [Enter]. You can use
your receiver.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Follow the instruction on the screen.
Setup memory
Audio Control, AV-IN SETUP, Camera, and
Audio SETUP settings can be memorized. The
memorized settings can be recalled at any
time. For example, even when the settings
are cleared due to replacement of the
battery, the settings can be restored.
1 Touch [SETUP Memory] in the System
Menu screen.
SETUP Memory screen appears.
Recall
2 Follow the instruction on the screen.
Recalls the memorized settings.
Memory
Memorizes the current settings.
Clear
Clears the currently memorized settings.
Cancel
Quits memorization/recalling of settings.
[Lock]/[Unlock]*
Locks or unlocks the AV-IN SETUP, and Audio
SETUP settings.
Yes
Memorizes or recalls the settings.
No
Cancels the function or memorization.
The SETUP Menu screen appears again.
* When [Lock] is selected, you cannot change
the AV-IN SETUP, and Audio SETUP settings.
Also, the locked key mark is displayed
under each setting icon in the setup menu.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor angle control
Display Setup
You can adjust the position of the monitor.
1 Touch [Menu] on any screen.
1 Touch [Angle] in the Display Menu
2 Touch [SETUP].
screen.
SETUP Menu screen appears.
Angle setup screen appears.
3 Touch [Display].
2 Select a below number that represents
your desired angle setting.
Display Menu screen appears.
See the following section for each setting.
Default is “0”.
• Control monitor angle
NOTE
• You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering original color
You can register your original color.
Panel color coordinate
You can set the screen and button
illumination color.
The selectable items differ depending on the
unit.
1 Touch [Adjust] in the Panel Color
Coordinate screen.
Panel Color RGB Coordinate screen
appears.
1 Touch [Color] in the Display Menu
2 Use [2] and [3] to adjust each color
screen.
value.
Color screen appears.
2 Touch [SET] of [Panel Color Coordinate].
3 Touch the desired preset key for 2
seconds.
Panel Color Coordinate screen appears.
Panel color scan
You can set the panel color to continuously
scan through the color spectrum.
NOTE
• You can touch [SET] or [Initialize] when
[Panel Color Scan] is set to off.
1 Touch [ON] of [Panel Color Scan] in the
• Touch [Initialize] to reset the settings to the
default settings.
Color screen.
Panel Color Scan is set to on.
3 Touch the desired color.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
display returns to the Background screen.
Changing background image
You can load an image from the connected
USB device and set it for the background
image.
NOTE
• Touching [
] rotates counter clockwise.
] rotates clockwise.
• Touching [
Before operating this procedure, it is
necessary to connect the device which has
the image to load.
6 Touch [Change] of [Background
Change] in the Background screen.
1 Touch [Background] in the Display
7 Select an image for background and
Menu screen.
touch [Enter].
Background screen appears.
NOTE
2 Touch [STANDBY].
readable image specifications.
• Touching [Delete] in the Background screen
deletes the background image. After you touch
[Delete], a confirmation message appears. Follow
the message and complete the operation.
3 Touch [Memory] of [User Background].
User Background File Select screen
appears.
4 Select the image to load.
5 Touch [Enter].
The selected image is loaded and the
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation Setup
Camera Setup
You can set navigation parameters.
You can set camera parameters.
1 Touch [Menu] on any screen.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
2 Touch [SETUP].
SETUP Menu screen appears.
SETUP Menu screen appears.
3 Touch [Navigation].
3 Touch [Camera].
Navigation SETUP screen appears.
Camera SETUP screen appears.
4 Set each item as follows.
4 Set each item as follows.
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is“20”.
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is“ON”.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Camera*1
Selects the type of rear camera to use.
Software Information
Check the software version of this unit.
CMOS-3xx: When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
1 Touch [Menu] on any screen.
2 Touch [SETUP].
connected.
SETUP Menu screen appears.
R-CAM Interruption
3 Touch [Software].
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUD> (
)/ <AUDIO>
(DNX525DAB) / <TEL> (DNX5250BT
) button for 1 second*4.
OFF (Default): Switches to the rear view
camera video display
when pressing the <AUD>
(
)/ <AUDIO>
(DNX525DAB) / <TEL>
Software Information screen appears.
(DNX5250BT
) button
4 Confirm the software version. Touch
for 1 second*4.
R-CAM Settings*2
[Update] as necessary.
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Front Camera*1
Selects the type of front camera to use.
CMOS-3xx: When the CMOS-300 series with ID
2 set is connected.
Other: When the other camera is connected.
OFF (Default): When the front camera is not
used.
F-CAM Settings*3
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1 These settings become settable only when
the parking brake is on.
*2 This setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 This setting becomes settable only
when the parking brake is on and “Front
Camera” is set to CMOS-300 series.
*4 [TEL Key Longer than 1 Second] or [AUD
Key Longer than 1 Second] must be set
93
Download from Www.Somanuals.com. All Manuals Search And Download.
AV Input Setup
AV Output Interface Setup
You can set AV input parameters.
You can select an AV source to be output at
the AV OUTPUT port. Default is “VIDEO1”.
1 Touch [Menu] on any screen.
1 Touch [Menu] on any screen.
2 Touch [SETUP].
2 Touch [SETUP].
SETUP Menu screen appears.
SETUP Menu screen appears.
3 Touch [Source].
3 Touch [AV-OUT].
4 Touch [AV-IN SETUP] in the list.
AV-OUT Interface screen appears.
AV-IN SETUP screen appears.
4 Touch [2] or [3] to set [AV-OUT] to
5 Set each item as follows.
VIDEO1, DISC, iPod, USB, or OFF.
NOTE
• Only when iPod is connected to this unit with
KCA-iP202, “USB”can be selected as AV output
source. For the connection setting, refer to iPod/
TV Tuner Control
Sets when connecting the TV tuner to AV
INPUT.
ON: Set to ON when connecting the 3rd party
TV tuner. AV-IN Name is set to TV. If you
connect the TV tuner made by DOS and
watch TV, you can perform some simple
operations by touching the screen of this
unit.
OFF (Default): Set to OFF when not connecting
the 3rd party TV tuner.
AV-IN1 Name/AV-IN2 Name
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is“VIDEO”.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Audio
NOTE
Setting Audio
• Each operation in this section can be started from
the multi function menu.
1 Touch [Audio SETUP].
You can adjust the various settings such as
audio balance or subwoofer level.
1 Touch [Menu] on any screen.
2 Touch [Audio].
Audio screen appears.
See the following section for each setting.
Audio SETUP screen appears.
See the following section for each setting.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select a speaker size using [2] and [3].
The speaker size is different depending
on the speaker type and the unit.
Speaker setup
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
Front
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Rear
1 Touch [Speaker Select] in the Audio
None, OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
SETUP screen.
Speaker Select screen appears.
Subwoofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
NOTE
• Select“None”if you have no speakers.
2 Touch the speaker you wish to adjust
and set each item as follows.
Tweeter
You can set the tweeter when you are
selecting front speakers.
None, Small, Middle, Large
X’over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker
type.
For details, see Crossover network setup
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Crossover network setup
You can set a crossover frequency of
speakers.
Car type setup
You can setup the car type and speaker
network, etc.
1 Touch the speaker to set the crossover
1 Touch [Car Type] in the Audio SETUP
in the Speaker Select screen.
screen.
2 Touch [X’over].
Car Type screen appears.
X’over screen appears.
2 Select your car type from the list.
3 Set each item as follows.
TW (Tweeter) Gain *1
NOTE
• If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each channel) to
have the highest surround effects.
Adjusts the tweeter level. (When front is
selected on Speaker Select screen)
Gain
Adjusts the front speaker, rear speaker, or
subwoofer level.
Phase*2
Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to“Reverse”. (When subwoofer is selected on
Speaker Select screen)
HPF FREQ
High Pass Filter adjustment. (When front or rear
speaker is selected on Speaker Select screen)
LPF FREQ
Low Pass Filter adjustment. (When subwoofer
is selected on Speaker Select screen)
Slope*3
Sets a crossover slope.
*1 Only when “Tweeter” is set to “Small”,
“Middle”, “Large” in <Speaker Setup>.
*2 Only when “Subwoofer” is set to a mode
other than “None” in <Speaker Setup>.
*3 Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in <X’over>.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker location setup
DSP select
1 In the Car Type screen, touch [Location].
You can select whether using DSP (Digital
Signal Processor) System.
Speaker Location screen appears.
2 Select the speaker locations using [3].
1 Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Front Speaker
Select the location from“Door”/“On Dash”/
“Under Dash”.
Bypass
There is no effect by DSP.
Rear Speaker
Select the location from“Door”/“Rear Deck”,
“2nd Row”/“3rd Row”(Minivan, Passenger Van).
Through
There is an effect by DSP.
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling General Audio
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1 Touch [Audio Control].
1 Touch [Equalizer].
2 Set each item as follows.
Equalizer screen appears.
Fader #/Balance #
Adjust the volume balance around the
touched area.
[2] and [3] adjust the right and left volume
balance.
[5] and [∞] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to“None”.
Bass Boost
Sets the amount of bass boost among“OFF”/
“Level1”/“Level2”/“Level3”.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you
suddenly switch to another source may be
extremely loud.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Gain level (light green boxed area)
Operation
Adjust the gain level by touching the each
frequency bar.
Controlling EQ curves
Touching [2], [3], [5] and [∞] can also
adjust the level. Use [2] and [3] to select a
frequency, and [5] and [∞] to set the level.
1 Select EQ curve from [Natural],
[Rock], [Pops], [Easy], [Top40], [Jazz],
[Powerful], [iPod], and [User].
EQ INIT
Returns to the previous level which the gain
level is adjusted.
Flat
Tone curve becomes flat.
Bass EXT (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5 Hz.
Loudness
Sets the amounts of boost of low and high
tones.
NOTE
• [iPod] is available only during iPod source.
“OFF”, “Low”, “High”
“OFF”, “ON”
Controlling equalizer manually
This setting cannot be performed when you
select [iPod] in the Equalizer screen.
SW Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to“None”.
1 Touch [EQ] in the Equalizer screen.
2 Touch the screen and set the Graphic
Equalizer as desired.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Zone Control
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
You can select different sources for both
front and rear positions in the vehicle.
• When the dual zone function is set to on, the
following functions are not available.
1 Touch [Zone Control].
• Output from the subwoofer
• Equalizer Control/Space Enhancer
/
• DSP Bypass Control/Speaker Setup/Car Type
• Different sources from iPod/iPhone (apps) cannot
be set as front source and rear source separately.
Only one source (app) can be set as front and
rear sources.
Zone Control screen appears.
2 Touch [Dual Zone].
3 Set each source as follows.
[3] (Front Source, Rear Source)
Select the audio source for each.
[∞], [5] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Space Enhancer
Sound Effect
You can set sound effects.
1 Touch [Space Enhancer] in the Sound
Effect screen.
1 Touch [Sound Effect].
Space Enhancer screen appears.
Sound Effect screen appears.
2 Touch [Small], [Large], or [OFF].
Each setting value indicates the
soundscape level.
NOTE
• This setting is not available during HD Radio tuner
source.
See the following section for each setting.
• Set space enhancer
• Set up elevation
• Set up realizer or supreme
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive Equalizer setting
Elevation
The sound quality is automatically adjusted.
You can raise the sound position heard from
the speakers virtually.
1 Touch [ON] or [OFF] of
[Drive Equalizer+].
1 Touch [Elevation] in the Sound Effect
screen.
DNX7250DAB:
The sound quality is automatically
optimized to meet the current car speed
by GPS.
DNX5250BT, DNX525DAB, DNX4250DAB,
DNX4250BT:
Elevation screen appears.
2 Select Elevation level from [High],
[Low], and [OFF].
The sound quality is automatically
optimized to meet the current volume
level.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Realizer and Supreme
Listening Position
You can restore the sound lost due to audio
compression to a realistic sound.
You can adjust the sound effects according
to your listening position.
1 Touch the screen in the Sound Effect
1 Touch [Position].
screen.
Position screen appears.
Realizer
2 Select listening position from [Front R]
(Right front), [Front L] (Left front),
[Front All] (All front), and [All] using [2]
and [3].
Realizer is sound enhancement and boosting
low frequencies (bass boost).
Select the level from“OFF”/“Level1”/“Level2”/
“Level3”.
Supreme
Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-frequency
range that is cut off when encoding.
This function works on DVD MEDIA, USB and
iPod sources.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Position DTA control
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
You can fine-adjust your listening position.
1 In Position screen, touch [Adjust].
• If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
2 Select the speaker you wish to adjust
by touching speaker icon.
Determine the center of the currently set
listening position as the reference point.
1
2
3
4
5
Measure the distances from the reference
point to the speakers.
Calculate the differences between the distance
of the furthest speaker and other speakers.
Input the differences calculated in step for
3
individual speakers.
Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
3 Set DTA as follows.
Example: When [Front All] is selected as the
listening position
+100cm
50cm
80cm
150cm
[2], [3]
+70cm
Adjust the settings of the DTA position.
+0cm
Gain
Touch to adjust the gain of each speaker.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
This unit can be operated using the remote control.
The remote control is the optional accessory (KCA-RCDV331).
2CAUTION
• Put the remote control in a place where it will not move during braking or other operations. A
dangerous situation could result, if the remote control falls down and gets wedged under the pedals
while driving.
• Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause
the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately
rinse with water and consult a physician.
• Place the battery out of reach of children. In the unlikely event that a child swallows the battery,
immediately consult a physician.
Battery Installation
If the remote control operates only over shorter distances or does not operate at all, it is possible
that the batteries are depleted.
In such instances, replace the both batteries with new ones.
1 Insert two “AAA”/“R03”-size batteries with the and poles aligned properly, following
the illustration inside the case.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the Remote control Buttons
Switching the operation mode
Direct search mode
The functions operated from the remote
control differ depending on the position of
the mode switch.
Using the remote control, you can jump
directly to the desired file, track chapter, etc.
with entering the number corresponding to
the content.
AUD
•
NOTE
DVD
•
• This operation cannot be performed for USB
device and iPod.
•
T V
•
NAV
1 Press the <#BS> button several times
until the desired content appears.
The available contents are different
depending on the source.
DVD
Title number/Chapter number/Play time/Item
number*
* You may not be able to use this function with
some discs or scenes.
VCD 1.X and 2.X (PBC OFF)
Track number
VCD 2.X (PBC ON)
Scene number/number
Music CD
Track number/Play time
Audio files
AUD mode
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode
Switch to this mode when playing a disc
media including DVD, VCD, and CD.
NAV mode
Switch to this mode when controlling
navigation function.
Folder number/File number
Radio
Frequency value
NOTE
2 Enter the number of the content you
• When controlling a player that is not integrated in
the unit, select“AUD”mode.
want to play using the numeric keypad.
3 For DVD or VCD, press the <ENTER>
button.
For music CD or audio files, press the
<POSITION> button.
For radio, press the <2> or <3> button.
The content you entered is played.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
4
1
3
2
5
6
7
17
19
8
18
20
9
10
11
21
22
12
13
23
24
14
25
26
15
16
Key
Name
Location of
Function
the mode switch
1
SRC
−
Switches to the source to be played.
In hands-free mode, hangs up the phone.
2
3
NAV
−
Switches between the navigation and the source screens.
MENU
DVD
Stops playing and memorizes the last point where the disc
stopped. The last point is deleted by pressing twice.
NAV
NAV
Displays Main menu.
4
5
OUT, IN
Zooms in or out the navigation map.
POSITION AUD, DVD
Pauses the track or file, and resumes playing by pressing twice.
During radio source in AUD mode, switches the seek mode.
NAV
Cursor Key DVD
NAV
Displays the current position.
6
7
Moves the cursor in the DVD menu.
Moves the cursor or scrolls the map.
Performs the selected function.
ENTER
AUD, DVD
NAV
• Registers the selected position.
• Performs the selected function.
8
ROUTE M AUD
Screen mode changes each time you press this key during video
playback.
DVD
NAV
Returns to the DVD top menu.
Displays Route Option menu.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
Location of
Function
Switches navigation display on/off.
Displays the DVD menu.
Name
the mode switch
9
VOICE
AUD
DVD
Turns the playback control on or off while playing VCD.
NAV
Speaks the voice guidance.
10 VIEW
AUD, DVD
NAV
Switches the AV source to be output.
Switches between 2D and 3D map displays.
11 MAP DIR
AUD, DVD
Switches the display angle each time it is pressed.
NAV
Switches between the heading up navigation and north up
navigation map displays.
12 5/∞
AUD, DVD
Selects the folder to be played.
During radio source in AUD mode, switches the bands to be
received.
13 2/3
AUD, DVD
AUD
Selects the track or file to be played.
During radio source in AUD mode, switches to broadcast stations
received by the unit.
14 Numeric
Specifies the number to search in direct search.
For details on the direct search mode, see Direct search mode
Keypad
DVD
• Press [1] [2] to fast forward/backward. Switches the fast forward/
backward speed each time you press this key.
• Press [4] [5] to slow forward/backward. Switches the slow
playback speed each time you press this key.*
*DVD only
15
+
DVD
Clears the number.
*
16 # BS
AUD, DVD
Switches to the direct search mode.
For details on the direct search mode, see Direct search mode
17 AUDIO
18 CANCEL
DVD
DVD
NAV
Switches the voice language each time you press this key.
Displays previous screen.
Cancels the operations.
19 SUBTITLE DVD
Switches the subtitle language.
20
−
−
When a call comes in, answers the call.
Switches the picture angle each time you press this key.
Adjusts the volume.
21 ANGLE
22 Vol 5∞
23 ZOOM
24 2 ZONE
25
26 ATT
DVD
DVD
Switches the zoom ratio (2, 3, 4, Off) each time you press this key.
Switches the Dual Zone function on and off.
Adjusts volume at rear when the Dual Zone function is on.
AUD, DVD
−
−
R.VOL
Lowers the volume by pressing the key once.
Restores the previous volume by pressing the key twice.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problems and Solutions
If any trouble occurs, first check the following table for possible problems.
• Some functions of this unit may be disabled by some settings made on this unit.
• What might seem to be a malfunction in your unit may just be the result of slight misoperation
or miswiring.
About settings
Problem
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase. to on.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
Reason
Subwoofer is not set
Solution
Set the subwoofer to on.
The dual zone function Set the dual zone function to off.
is enabled.
• Cannot select the output
destination of the subsource in is disabled.
the dual zone.
The dual zone function Set the dual zone function to on.
• Cannot adjust the volume of the
rear speakers.
• Cannot set up the equalizer.
• Cannot set up the crossover
network.
The dual zone function Set the dual zone function to off.
is enabled.
“DSP Select”is set to
“Bypass”.
Set“DSP Select”to“Through”.
About audio operations
Problem
Reason
Solution
Radio reception is poor.
The car antenna is not Pull out the antenna all the way.
extended.
The antenna control
Connect the wire correctly.
wire is not connected. See“Connection”in the Quick Start Guide.
Cannot play audio files stored in “CD Read”is set to“2”.
a disc.
Set“CD Read”to“1”.
Cannot select a folder.
The random play
function is enabled.
Turn off the random function.
Cannot perform repeat play
during VCD playback.
The PBC function is
enabled.
Turn off the PBC function.
The specified disc does not play, The disc is quite dirty.
but another one plays instead.
Clean the disc.
The disc is severely
scratched.
Try another disc instead.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
The sound skips when an audio
file is being played.
Reason
The disc is scratched
or dirty.
Solution
Clean the disc.
The recording
Record the file again or use another disc.
condition is bad.
Other
Problem
Reason
Solution
The Touch Sensor Tone doesn’t
sound.
The preout jack is being The Touch Sensor Tone cannot be output
used. from the preout jack.
Error Messages
When you fail to operate the unit correctly, the cause of the failure appears as the message on
the screen.
Error Message
Cause
Solution
Protect
Protective circuit has been activated Wire or insulate the speaker cord as
because a speaker cord has shorted appropriate and then push the <Reset>
or it has come in contact with the
car chassis.
Hot Error
When the internal temperature of
this unit rises to 60°C or more, the
protection circuit is activated and
you may not be able to operate
the unit.
Use the unit again after reducing the
temperature of the unit.
Mecha Error
The disc player is malfunctioning.
Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
Disc Error
Read Error
An unplayable disc is inserted.
The disc is quite dirty.
Change the disc.
Clean the disc.
Disc is upside down.
Load the disc with the labeled side up.
Region Code
Error
The disc you wanted to play has a
region code that cannot be played try another disc.
with this unit.
Parental Level
Error
The disc you wanted to play has a
you set.
Set the parental level.
Error 07–67
The unit is not operating correctly
due to some reason or other.
Push the unit’s Reset button. If the“Error
07−67”message does not disappear, see your
nearest Kenwood dealer.
No Device
(USB device,
Bluetooth
The USB device is selected as a
source although no USB device is
connected.
Change the source to any source other than
USB/iPod. Connect a USB device, and change
the source to USB again.
audio player)
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Message
Cause
Solution
Disconnected
(iPod)
The iPod/Bluetooth audio player
is selected as a source although
no iPod/Bluetooth audio player is
connected.
Change the source to any source other than
iPod/Bluetooth. Connect an iPod/Bluetooth
audio player, and change the source to iPod/
Bluetooth again.
No Media file
no playable audio file. Media was
played that doesn’t have data
recorded that the unit can play.
try another USB device.
USB Device
Error!!
The connected USB device is rated Check the USB device. Some trouble may have
a current capacity higher than the
allowable limit.
occurred to the connected USB device.
Change the source to any source other than
USB. Remove the USB device.
Authorization
Error
Connection to the iPod has failed.
• Remove the iPod and then reconnect it.
• The unit does not support the iPod.
Update your
iPod
The iPod’s software is an older
version which the unit can not
support.
The unit may not support the connected iPod
model.
Confirm that the software for the iPod is the
latest version.
Navigation
Error. Please
The communication error has
occurred due to severely cold
Turn on power again after warming your car
interior.
turn on power temperature.
again later.
Antenna Error
The antenna has a short-circuit and Check the Digital Radio antenna. If a passive
the protective circuit has activated. antenna without a booster is used, set Antenna
Power“OFF”.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Unit
If the unit or the connected unit fails to operate properly, reset the unit.
Press the <Reset> button.
The unit returns to factory settings.
1
DNX7250DAB
DNX5250BT
DNX525DAB
DNX4250DAB/ DNX4250BT
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to
• When the unit is turned on after resetting, the Initial SETUP screen appears. See Initial setup (P.15).
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Playable Media and Files
You can play various kinds of media and files on this unit.
List of playable discs
Disc types
DVD
Standard
DVD Video
Support
Remark
‡
×
×
‡
DVD Audio
DVD-VR
DVD-R*1
• MP3/WMA/AAC/MPEG1/MPEG2/DivX playback
• Multi-border/Multisession playback (Playback
depends on authoring conditions)
‡
‡
‡
‡
‡
×
DVD-RW
DVD+R
DVD+RW
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
Only video format
CD-TEXT
‡
‡
‡
‡
×
CD
Music CD*1
CD-ROM
• MP3/WMA/AAC/MPEG1/MPEG2 playback
• Multisession is supported.
• Packet write is not supported.
CD-R
CD-RW
DTS-CD
‡
×
Video CD (VCD)
Super video CD
Photo CD
×
%
‡
×
CD-EXTRA
HDCD
Only music CD session can be played.
CCCD
Others
Dualdisc
×
%
Super audio CD
Only CD layer can be played.
*1 Incompatible with 8 cm (3 inch) discs.
‡ : Playback is possible.
%: Playback is partly possible.
× : Playback is impossible.
NOTE
• When buying DRM enabled contents, check the Registration Code in the DivX(R) VOD (P.59). Each time a file
with the displayed code is played and protected against copying, the code changes.
• DivX can be played only from a DVD disc media.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Use of DualDisc
■ Video files
When playing a“DualDisc”on this unit, the surface of
the disc that is not played may be scratched while the
disc is inserted or ejected. Since the music CD surface
does not conform to the CD standard, playback may be
impossible.
• MPEG1 (.mpg, .mpeg, .m1v*)
*Mass-storage-class USB device only
• MPEG2 (.mpg, .mpeg, .m2v*)
*Mass-storage-class USB device only
• DivX (.divx, .div, .avi)
DVD only
(A“DualDisc”is a disc with one surface containing DVD
standard signals and the other surface containing
music CD signals.)
• H.264/MPEG-4 AVC (.mp4, .m4v)
Mass-storage-class USB device only
• WMV 9 (.wmv, .m2ts)
Mass-storage-class USB device only
■ About disc format
The disc format should be the one of the following.
• ISO 9660 Level 1/2
• Joliet
■ Picture files
Only picture files in USB device can be displayed.
• Romeo
Files stored in disc media is not supported.
• JPEG (.jpg, .jpeg)
• Long file name
• PNG (.png)
• BMP (.bmp)
About files
The following audio, video, and picture files
are supported.
NOTE
• BMP and PNG can be set only as wallpaper.
■ Audio files
• AAC-LC (.m4a)
• MP3 (.mp3)
■ Playing order of files
In the example of folder/file tree shown below, the files
are played in the order from ! to P.
• WMA (.wma)
• Linear PCM (WAVE) (.wav)
Mass-storage-class USB device only
: Folder
^
¡
Root
(1)
• FLAC (.flac)
Mass-storage-class USB device only
: Audio file
¡!
2
NOTE
3
¡"
¡#
• If music of normal CD and other playback systems
are recorded in the same disc, only the playback
system recorded at the first setout is played.
4
¡$
5
• WMA and AAC of which is covered with DRM
cannot be played.
¡%
¡P
• Although the audio files are complied with
the standards listed above, the play may be
impossible depending on the types or conditions
of media or device.
• An online manual about audio files is put on the
site, www.kenwood.com/cs/ce/audiofile/.
On this online manual, detailed information and
notes which are not written in this manual are
provided. Make sure to read through the online
manual as well.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Connectable iPod/iPhone
Usable USB device
The following models can be connected to
this unit.
You can use a mass-storage-class USB device
on this unit.
Made for
• iPhone 5
• iPhone 4S
• iPhone 4
The word “USB device” appearing in this
manual indicates a flash memory device and
digital audio players can be recognized as
mass-storage.
• iPhone 3GS
• iPhone 3G
• iPhone
■ About file system
The file system should be the one of the following.
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• FAT16
• FAT32
NOTE
• When the USB device is connected to this unit, it
can be charged through the USB cable.
• iPod with video
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
• For the conformity information on iPod/iPhone
software,
access www.kenwood.com/cs/ce/ipod/.
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended. (However,
maximum supply current of CA-U1EX is 500mA.)
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable
KCA-iP202 or KCA-iP102, you can supply power
to your iPod/iPhone as well as charge it while
playing music. However, the power of this unit
must be on.
Usable SD card
microSD card
and
.
• If you start playback after connecting the iPod,
the music that has been played by the iPod is
played first.
The unit is capable of playback of SD/
In this case, “Reading”is displayed without
displaying a folder name, etc. Changing the
browse item will display a correct title, etc.
SDHC memory cards
microSDHC memory cards
with the SD or SDHC standard.
or microSD/
complying
• When the iPod is connected to this unit,
“KENWOOD”or“✓”is displayed on the iPod to
indicate that you cannot operate the iPod.
A special adapter is required to use a miniSD
card, miniSDHC card, microSD card or
microSDHC card.
The MultiMedia Card (MMC) cannot be used.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Bar Indicator Items
Shown below is a list of indicators displayed on the status bar in the screen.
Current status of this unit is displayed on the bar.
Status bar
C-REP
■ General
The chapter repeat function is on.
T-REP
The title repeat function is on.
ATT
The attenuator is active.
DUAL
The dual zone function is on.
TEL
■ VCD
Indicates the connection state of the Bluetooth
hands-free unit.
1chLL/2chLL
Identifies the left audio output of channel 1
or 2.
1chLR/2chLR
Identifies the monaural audio output of
channel 1 or 2.
1chRR/2chRR
• White: Connected
• Orange: Not connected
LOUD
The loudness control function is on.
MUTE
The mute function is active.
Identifies the right audio output of channel 1
or 2.
1chST/2chST
Identifies the stereo audio output of channel
1 or 2.
■ DVD/CD
FO-REP
Folder repeat function is on.
IN
A disc is inserted.
• White: A Disc is inside the unit.
• Orange: Error at the disc player
VIDEO
Identifies the video file.
MUSIC
Identifies the music file.
RDM
The random function is on.
REP
LL
Identifies the left audio output.
LR
Identifies the monaural audio output.
RR
Identifies the right audio output.
STEREO
Identifies the stereo audio output.
PBC
The PBC function is on.
SVCD
Identifies the Super Video CD.
The repeat function is on.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
VER1
MANUAL
The VCD version is 1.
Seek mode is set to MANUAL.
VER2
The VCD version is 2.
REP
MC
Receiving service is displayed.
• White: Primary Component is received.
• Orange: Secondary Component is received.
The repeat function is on.
■ USB
■ Tuner
FO-REP
The folder repeat function is on.
VIDEO
Identifies the video file.
MUSIC
AUTO1
Seek mode is set to AUTO1.
AUTO2
Seek mode is set to AUTO2.
Identifies the music file.
PICTURE
Identifies the picture file.
RDM
The random function is on.
MONO
The forced monaural function is on.
AF
The AF search function is on.
EON
REP
The Radio Data System station is sending EON.
The repeat function is on.
PLST
The play list mode is selected now.
Lo.S
The Local Seek function is on.
NEWS
News bulletin interruption is in progress.
■ iPod
RDS
MUSIC
Indicates the state of the Radio Data System
station when the AF function is on.
• White: Radio Data System is being received.
• Orange: Radio Data System is not being
received.
Identifies the music file.
VIDEO
Identifies the video file.
RDM
The random function is on.
MANUAL
Seek mode is set to MANUAL.
A-RDM
The album random function is on.
REP
The repeat function is on.
ST
A stereo broadcast is being received.
TI
Indicates the reception state of traffic
information.
• White: TP is being received.
• Orange: TP is not being received.
■ Digital Radio
Digital Radio
Digital Radio is being received.
RDS
Radio Data System is being received.
AUTO1
Seek mode is set to AUTO1.
AUTO2
Seek mode is set to AUTO2.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Region Codes in the World
The DVD players are given a region code according to the country or area it is marketed, as
shown in the following map.
1
5
2
1
2
1
4
5
2
4
■ DVD disc marks
■ Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
ALL
Indicates a region number. The discs with this mark can
be played with any DVD player.
Prohibition Mark
8
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
32
■ Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not be
able to remove it from this unit.
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
9
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
16:9 LB
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
122
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Language Codes
Code
aa
Language
Code
ia
Language
Interlingua
Code
rn
Language
Kirundi
Afar
ab
af
am
ar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
ie
ik
id
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
ro
ru
rw
sa
sd
sg
sh
si
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
sk
sl
Slovenian
Samoan
Shona
sm
sn
so
sq
sr
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
ss
st
lb
ln
lo
lt
su
sv
sw
ta
te
tg
th
ti
tk
tl
tn
to
tr
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
lv
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
eu
fa
fi
fj
fo
ts
tt
fr
fy
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
ga
gd
gl
gn
gu
ha
he
hi
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hebrew
Hindi
Croatian
Hungarian
Armenian
Xhosa
Yoruba
Chinese
Zulu
Polish
ps
pt
qu
rm
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
hr
hu
hy
123
Download from Www.Somanuals.com. All Manuals Search And Download.
■ USB interface section
USB Standard
Specifications
: USB 2.0 High speed
■ Monitor section
Picture Size
File System
: FAT 16/ 32
DNX7250DAB, DNX525DAB
: 6.95 inches (diagonal) wide
: 156.6 mm (W) x 81.6 mm (H)
DNX5250BT, DNX4250DAB, DNX4250BT
: 6.1 inches (diagonal) wide
Maximum Power Supply Current
: DC 5 V 1 A
D/A Converter
: 24 Bit
:136.2 mm (W) x 72.0 mm (H)
Audio Decoder
Display System
: MP3/ WMA/ AAC/ WAV/ FLAC
: Transparent TN LCD panel
Video Decoder
Drive System
: MPEG1/ MPEG2/ MPEG4/ WMV/ H.264
: TFT active matrix system
Number of Pixels
: 1,152,000 (800H x 480V x RGB)
■ SD (DNX7250DAB, DNX525DAB,
DNX5250BT)
SD Standard
Effective Pixels
: 99.99 %
: SD / SD-HC
Pixel Arrangement
Compatible File System
: RGB striped arrangement
: FAT 16/ 32
Back Lighting
Capacity
: LED
: Maximum 32G Byte
Data Transfer Rate
■ DVD player section
DNX7250DAB, DNX5250BT
: Maximum 24 Mbps
DNX525DAB
D/A Converter
: 24 bit
Audio Decoder
: Linear PCM/ Dolby Digita/ MP3/ WMA/ AAC
: Maximum 12 Mbps
Audio Decoder
: MP3/ WMA/ AAC/ WAV/ FLAC
Video Decoder
: MPEG1/ MPEG2/ DivX
Video Decoder
: MPEG1/ MPEG2/ MPEG4/ WMV/ H.264
Wow & Flutter
: Below Measurable Limit
Frequency Response
■ Bluetooth section
Technology
: Bluetooth Ver. 3.0+EDR
• 96 kHz : 20 – 20,000 Hz
• 48 kHz : 20 – 20,000 Hz
• 44.1 kHz : 20 – 20,000 Hz
Frequency
: 2.402 – 2.480 GHz
Total Harmonic Distortion (1 kHz)
: 0.010 % (1 kHz)
Output Power
: +4dBm (MAX), 0dBm (AVE), Power Class2
S/N Ratio (dB)
: 98 dB (DVD-Video 96 kHz)
Maximum Communication range
: Line of sight approx. 10m (32.8 ft)
Dynamic Range
: 98 dB (DVD-Video 96 kHz)
Audio Codec
SBC/ AAC/ MP3/ aptX (DNX7250DAB only)
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Profile
Sampling Frequency
: 44.1/ 48/ 96 kHz
• HFP (V1.6) (Hands Free Profile)
• SPP (Serial Port Profile)
Quantifying Bit Number
• SDP (Service Discovery Profile)
• A2DP (Advanced Audio Distribution Profile)
• AVRCP (V1.4) (Audio/Video Remote Control Profile)
• PBAP (Phonebook Access Profile)
: 16/ 20/ 24 bit
124
Download from Www.Somanuals.com. All Manuals Search And Download.
• GAP (Generic Access Profile)
• Multi Profile support
■ FM tuner section
Frequency Range (step)
: 87.5 MHz – 108.0 MHz (50 kHz)
■ HDMI/ MHL section
HDMI
: HDMI Type-A
Usable Sensitivity (S/N : 26 dB)
: 0.63 μV/75 Ω
Quieting Sensitivity (S/N : 46 dB)
: 15.2 dBf (1.6 μV/75 Ω)
MHL Supported Version
: MHL 2
Frequency Response ( 3.0 dB)
: 30 Hz – 15 kHz
MHL Maximum Power Supply Current
: DC 5 V 900 mA
S/N Ratio (dB)
: 75 dB (MONO)
■ DSP section
Graphics equalizer
DNX7250DAB
Selectivity ( 400 kHz)
: Over 80 dB
Stereo Separation
Band: 13 Band
Frequency (BAND1 – 13)
: 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.5k/ 4k/
6.3k/ 10k/ 16k Hz
DNX525DAB, DNX5250BT, DNX4250DAB,
DNX4250BT
: 45 dB (1 kHz)
■ AM tuner section
Frequency Range (step)
LW: 153 – 279 kHz (9 kHz)
MW: 531 – 1611 kHz (9 kHz)
Band: 7 Band
Frequency (BAND1 – 7)
: 62.5/ 160/ 400/ 1k/ 2.5k/ 6.3k/ 16k Hz
Usable Sensitivity
Gain
MW: 25μV
LW: 45μV
: -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dB
X'Over
DNX7250DAB
High pass filter
■ DAB section (DNX7250DAB,
DNX525DAB, DNX4250DAB)
Frequency Range
L-BAND: 1452.960 – 1490.624 (MHz)
BAND III: 174.928 – 239.200 (MHz)
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/
120/ 150 / 180/ 220/ 250 Hz
Slope: -6/-12/-18/-24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/-12/-18/-24 dB/Oct.
DNX525DAB, DNX5250BT, DNX4250DAB,
DNX4250BT
Sensitivity
: -100 dBm
S/N Ratio (dB)
DNX7250DAB, DNX5250BT
: 90 dB
DNX525DAB
: 80 dB
High pass filter
Frequency: Through, 50/ 60/ 80/ 100/ 120/ 150/ 180/
220 Hz
Slope: -6/-12/-18/-24 dB/Oct.
Low pass filter
Frequency: 50/ 60/ 80/ 100/ 120/ 150/ 180/ 220 Hz,
Through
Slope: -6/-12/-18/-24 dB/Oct.
■ Digital Antenna Connector section
(DNX7250DAB, DNX525DAB,
DNX4250DAB)
Connector type
: SMB
Position
Front / Rear /Subwoofer Delay
: 0 – 6.1 m (0.02 m Step)
Gain
Output Voltage (11 – 16V)
: 14.4 V
: -8 – 0 dB
Maximum Current
Subwoofer level
: < 100 mA
: -50 – +10 dB
125
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Video section
■ Navigation section
Color System of External Video Input
Receiver
: NTSC/PAL
: High-sensitivity GPS receiver
External Video Input Level (RCA/mini jack)
Reception Frequency
: 1 Vp-p/ 75 Ω
: 1575.42 MHz (C/A code)
External Audio Max Input Level (RCA/mini jack)
Acquisition Times
: 2 V/ 25 kΩ
Cold : 26 seconds (typ)
(All satellites at -130 dBm Without aiding)
Video Input Level (RCA jacks)
Update Rate
: 1 Vp-p/ 75 Ω
: 1/second, continuous
Video Output Level (RCA jacks)
Accuracy
: 1 Vp-p/ 75 Ω
Position: <2.5 meters, CEP, at -130 dBm
Velocity: 0.1 meter/sec
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kΩ
Position Method
: GPS
■ Audio section
Maximum Power (Front & Rear)
Antenna
: External GPS antenna
: 50 W x 4
Full Bandwidth Power (Front & Rear) (PWR DIN45324,
+B=14.4V)
: 30 W x 4
■ General
Operating Voltage
: 14.4 V (10.5 – 16 V allowable)
Preout Level (V)
Maximum Current Consumption
DNX7250DAB
: 5 V/ 10 kΩ
: 10 A
DNX525DAB, DNX5250BT, DNX4250DAB,
DNX4250BT
: 2 V/ 10 kΩ
Installation Dimensions (W x H x D)
DNX7250DAB
: 181.7 x 112.2 x 163.0 mm
DNX525DAB
Preout Impedance
DNX7250DAB
: 178 x 100 x 146 mm
: ≤ 80 Ω
DNX5250BT, DNX4250DAB, DNX4250BT
: 181.7 x 112.2 x 160.3 mm
DNX525DAB, DNX5250BT, DNX4250DAB,
DNX4250BT
: ≤ 600 Ω
Operational Temperature Range
: -10 °C – +60 °C
Speaker Impedance
: 4 – 8 Ω
Weight
DNX7250DAB: 2.6 kg
DNX525DAB: 2.3 kg
DNX5250BT, DNX4250DAB, DNX4250BT: 2.0 kg
NOTE
• Although the effective pixels for the liquid crystal
panel is given as 99.99% or more, 0.01% of pixels
may not light or may light incorrectly.
Specifications subject to change without notice.
126
Download from Www.Somanuals.com. All Manuals Search And Download.
information on how to complete your registration.
About this Unit
• DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under license.
■ Copyrights
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registed trademarks of HDMI Licensing
LLC in the United States and other countries.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by JVC KENWOOD Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
• MHL and the MHL logo are a trademark or registered
trademark of MHL, LLC.
- Incorporates MHL 2
• The“AAC”logo is a trademark of Dolby Laboratories.
• “Made for iPod”and“Made for iPhone”mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has
been certified by the developer to meet Apple
performance standards. Apple is not responsible for
the operation of this device or its compliance with
safety and regulatory standards. Please note that the
use of this accessory with iPod, iPhone, or iPad may
affect wireless performance.
• libFLAC
Copyright (C) 2000,2001,2002,2003,2004,2005,2006,20
07,2008,2009 Josh Coalson
Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
- Redistributions of source code must retain the
above copyright notice, this list of conditions and the
following disclaimer.
- Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or
other materials provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the
names of its contributors may be used to endorse or
promote products derived from this software without
specific prior written permission.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
• iTunes is a trademark of Apple Inc.
•
is a trademark of DVD Format/Logo
Licensing Corporation registered in the U.S., Japan and
other countries.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND ONTRIBUTORS ``AS IS’’AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
• This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse
engineering and disassembly are prohibited.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
• Android is a trademark of Google Inc.
• Adobe, Acrobat and Reader are either registered
trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.
• QR Code ® is registered trademarks of DENSO WAVE
INCORPORATED in JAPAN and other countries.
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and
software tools to convert your files into DivX videos.
• The aptX® software is copyright CSR plc or its group
companies. All rights reserved. The aptX® mark and
the aptX logo are trade marks of CSR plc or one of its
group companies and may be registered in one or
more jurisdictions.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased
DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more
127
Download from Www.Somanuals.com. All Manuals Search And Download.
• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A
CONSUMER OR OTHER USES IN WHICH IT DOES NOT
RECEIVE REMUNERATION TO (¡)ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”)
AND/OR (¡¡)DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
■ The marking of products using lasers
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
• THIS PRODUCT IS LICENSED UNDER THE MPEG-
4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A
CONSUMER FOR (¡) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD (“MPEG-4
VIDEO”) AND/OR (¡¡) DECODING MPEG-4 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED
FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://
WWW.MPEGLA.COM.
■ Information on Disposal of Old
Electrical and Electronic Equipment
and Batteries (applicable for EU
countries that have adopted separate
waste collection systems)
Products and batteries with the symbol (crossed-out
wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries
should be recycled at a facility capable of handling
these items and their waste byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
Notice: The sign“Pb”below the symbol for batteries
indicates that this battery contains lead.
• Requirements Aha™:
Requirements for listening to the Aha™ are as follows:
iPhone or iPod touch
• Use an Apple iPhone or iPod touch running iOS4
or later.
• Search for“Aha”in the Apple App Store to find
and install the most current version of the Aha™
application on your device.
Android™
• Use Android OS 2.2 or later.
• Download the Aha™ application to your smartphone
from the Google play.
Note
Ñ
חשמלי Ñציוד Ñשל Ñלאשפה Ñהשלכה Ñבדבר Ñמידע Ñ Ñ Ñ
למדינות Ñרלוונטי (Ñסוללות Ñוכן Ñישן Ñואלקטרוני .)
מופרדת Ñאשפה Ñאיסוף Ñבמערכת Ñשמשתמשות X
עם אשפה פח ( הסימון עם וסוללות מוצרים להשליך ניתן לא .
רגילה ביתית כאשפה )עליו • In the application on your device, log in and create a
free account with Aha.
ן במתק סוללות וכן ישן ואלקטרוני חשמלי ציוד למחזר יש .
שלהם הלוואי ובתוצרי כאלה בפריטים לטפל המסוגל ן מתק אודות פרטים לקבלת המקומית הרשות עם קשר צרו ו יעזר נאותים לאשפה והשלכה מיחזור .אליכם הקרוב המיחזור ל וע בריאותנו על שליליות השפעות ולמנוע משאבים לשמר .
הסביבה • Internet connection by 3G, EDGE, or WiFi.
• Because Aha™ is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may become
unavailable.
ן מציי סוללות עבור לסימון שמתחת Pb הסימון :לב שימו .
עופרת מכילה שהסוללה • Some Aha™ functionality cannot be operated from
this unit.
• aha, the Aha logo, and the Aha trade dress are
trademarks or registered trademarks of HARMAN
International Industries, used with permission.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN
EU Representative’s:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
English
Hereby, JVC KENWOOD declares that this unit DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Français
Par la présente JVC KENWOOD déclare que l’appareil DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la directive 1999/5/CE.
Par la présente, JVC KENWOOD déclare que ce DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT est conforme aux exigences essentielles
et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables.
Deutsch
Hiermit erklärt JVC KENWOOD, dass sich dieser DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen relevanten Vorschriften der
Richtlinie 1999/5/EG befindet. (BMWi)
Hiermit erklärt JVC KENWOOD die Übereinstimmung des Gerätes DNX7250DAB,
DNX525DAB, DNX5250BT, DNX4250DAB, DNX4250BT mit den grundlegenden
Anforderungen und den anderen relevanten Festlegungen der Richitlinie
1999/5/EG. (Wien)
Svenska
Härmed intygar JVC KENWOOD att denna DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT stär l överensstämelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Suomi
JVC KENWOOD vakuuttaa täten että DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Slovensko
S tem JVC KENWOOD izjavlja, da je ta DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT v skladu z osnovnimi zahtevami in ostalimi
ustreznimi predpisi Direktive 1999/5/EC.
Slovensky
Spoločnosť JVC KENWOOD týmto vyhlasuje, že DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT spĺňa zákldné požiadavky a ďalšie
prislušné ustanovenia Direktĺvy 1999/5/EC.
Dansk
Undertegnede JVC KENWOOD erklærer harved, at følgende udstyr DNX7250DAB,
DNX525DAB, DNX5250BT, DNX4250DAB, DNX4250BT overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/5/EF.
Nederlands
Hierbij verklaart JVC KENWOOD dat het toestel DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Bij deze verklaat JVC KENWOOD dat deze DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT voldoet aan de essentiële eisen en aan
de overige relevante bepalingen van Richtlijn 1999/5/EC.
Norsk
JVC KENWOOD erklærer herved at enheten DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT oppfyller grunnleggende krav og andre
bestemmelser i direktiv 1999/5/EF.
Ελληνικά
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ ΟΤΙ DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.
Italiano
Con la presente JVC KENWOOD dichiara che questo DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT è conforme ai requisiti essenziali ed alle
altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Eesti
Sellega kinnitab JVC KENWOOD, et see DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT vastab direktiivi 1999/5/EC põhilistele nõudmistele ja
muudele asjakohastele määrustele.
Español
Por medio de la presente JVC KENWOOD declara que el DNX7250DAB,
DNX525DAB, DNX5250BT, DNX4250DAB, DNX4250BT cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Latviešu
Ar šo, JVC KENWOOD, apstiprina, ka DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT atbilst Direktīvas 1999/5/EK galvenajām prasībām un
citiem tās nosacījumiem.
Português
JVC KENWOOD declara que este DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Polska
Lietuviškai
Šiuo, JVC KENWOOD, pareiškia, kad šis DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT atitinka pagrindinius Direktyvos 1999/5/EB
reikalavimus ir kitas svarbias nuostatas.
JVC KENWOOD niniejszym oświadcza, że DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT spełnia zasadnicze wymogi oraz inne
istotne postanowienia dyrektywy 1999/5/EC.
Český
Malti
Hawnhekk, JVC KENWOOD, jiddikjara li dan DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT jikkonforma mal-ħtiġijiet essenzjali u
ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
JVC KENWOOD timto prohlasuje, ze DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT je ve shode se zakladnimi pozadavky a s dalsimi
prislusnymi ustanoveni Narizeni vlady c. 426/2000 Sb.
Magyar
Українська
Компанія JVC KENWOOD заявляє, що цей виріб DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT відповідає ключовим вимогам та
іншим пов’язаним положенням Директиви 1999/5/EC.
Alulírott, JVC KENWOOD, kijelenti, hogy a jelen DNX7250DAB, DNX525DAB,
DNX5250BT, DNX4250DAB, DNX4250BT megfelel az 1999/5/EC irányelvben
meghatározott alapvető követelményeknek és egyéb vonatkozó előírásoknak.
Croatia
Türkçe
Bu vesileyle JVC KENWOOD, DNX7250DAB, DNX525DAB, DNX5250BT,
DNX4250DAB, DNX4250BT ünitesinin, 1999/5/EC Direktifinin başlıca
gereksinimleri ve diğer ilgili hükümleri ile uyumlu olduğunu beyan eder.
Ovim putem tvrtka JVC KENWOOD izjavljuje da je ovaj uređaj DNX7250DAB,
DNX5250BT, DNX525DAB, DNX4250DAB, DNX4250BT ünitesinin, 1999/5/EC
Direktifinin başlıca gereksinimleri ve diğer ilgili hükümleri ile uyumlu olduğunu
beyan eder.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|