GPS NAVIGATION SYSTEM
DNX7340BT
DNX7340BTM
MONITOR WITH DVD RECEIVER
DDX7034BT
DDX7034BTM
DDX6034
DDX6034M
INSTRUCTION MANUAL
This instruction manual is used to describe models listed below.
Model availability and features (functions) may differ depending on the country and
sales area.
• Region 2 (DVD Region Code 2 area)
• Region 3 (DVD Region Code 3 area)
• Region 4 (DVD Region Code 4 area)
• Region 6 (DVD Region Code 6 area)
© B64-4512-00/01 (MW/M2W/XW/VV)
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
58
Hands Free Unit Control
Before Use
Downloading the Phonebook
Receiving a Call
During a Call
Call Waiting
44
44
44
44
44
45
45
46
46
46
47
48
48
49
50
51
51
How to Display SETUP Menu Screen
[Information]
58
DivX Setup
Software Information
[System]
59
59
User Interface
60
60
61
61
62
63
63
64
Making a Call
Language Setting
Touch Panel Adjustment
Clock Setup
Security Setup
Monitor Angle Control
EXT SW Setup
Calling by Phonebook
Calling by Entering a Phone Number
Making a Call Using Call Records
Calling by Voice Recognition
Controlling Tone-based Services
Setting Up the Hands-Free Phone
Voice Registration
Key Word Voice Registration
Phone Number Preset
SMS (Short Message Service)
Setup Memory
[Display]
Entering Background
Panel Color Coordinate
Screen Adjustment
[Bluetooth SETUP]
Registering Bluetooth Unit
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
[AV-IN SETUP]
AV Input Setup
[AV Interface]
AV Interface Setup
[Navigation]
Navigation Setup
[Audio SETUP]
DSP Bypass Control (DNX/DDX7 models) 71
Speaker Setup 72
Car Type (DTA) Setup (DNX/DDX7 models) 73
65
66
67
67
69
69
Audio Control
Audio Control Menu
Audio Control
Equalizer Control
Graphic Equalizer Setup
(DNX/ DDX7 models)
Tone Setup (DDX6 models)
Zone Control
Space Enhancer (DNX/ DDX7 models)
Position (DNX/ DDX7 models)
53
53
53
54
70
70
71
54
55
55
56
56
[DVD SETUP]
DVD Setup
DVD Language Setup
DVD Parental Level Setup
Disc Setup
74
75
75
76
Remote Controller
79
79
79
80
81
Battery installation
[USB SETUP], [SD SETUP]
USB/ SD Setup
[iPod SETUP]
Remote Controller mode switch
Common operations (AUD mode)
DVD/VCD (DVD mode)
77
77
78
78
iPod Setup
Music Disc/Audio file/Video file/ Picture file
(AUD mode)
82
83
83
84
[TUNER SETUP]
Tuner Setup (Reagion 2/ 3 models)
[TV SETUP]
Radio (AUD mode)
NAVI (NAVI mode)
TV (TV mode)
TV Setup
Status bar Indicator items
DVD Language Codes
Help? Troubleshooting
Help? Error
86
87
88
89
90
Specifications
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read this manual
This manual uses illustrations to explain its
operations.
Source Control Screen
The displays and panels shown in this manual
are examples used to provide clear explanations
of the operations.
For this reason, they may be different from the
actual displays or panels used, or some display
patterns may be different.
Switches to the source control screen to use
various functions.
1
Display the Source Control Screen
See <How to Display the Source Control
Screen>.
2
Operation on the Source Control screen
1
Selecting a screen item
Select and choose an item on the screen.
Select the item by touching the button on the
screen.
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[ꢀ], [D] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
Multi Function
[CRSC]
Turns the CRSC function On
FM
or Off.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
Setting
Change in the screen
With each operation, the screen changes in
th
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
2 sec.
: Continues to the next line.
: Ends here.
Continue to touch until the memory number
appears.
Next page ꢁ
Continue to the next page
The instruction continues to the next page.
Make sure to flip the page for the rest of the
instruction.
The above operation example with the mark
differs from the actual operation.
4
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
About the model groups
If different functions are used in different
model groups, the model groups are
described as shown below.
Names of models included in each model
group are as follows:
DNX models
DNX7340BT DNX7340BTM
DD
DDX7034BT DDX7034BTM
• DDX6 models
DDX6034 DDX6034M
Function Icon
Icons representing available functions are
shown below.
:Function of DVD-VIDEO playback.
:Function of DVD-VR playback.
:Function of Video CD playback.
:Function of CD (CD-DA) playback.
:Function of Audio File playback.
:Function of MPEG file playback.
:Function of DivX file playback.
:Function of JPEG file playback.
:Function of Disc (DVD, CD) media.
:Function of USB device or SD card.
:Function of FM reception.
DEO
-VR
USB/SD
FM
her mark
Press 2 seconds or more
Press the button, denoted by
seconds or more
Important precautions are described to
prevent injuries etc.
2sec. , for 2
Indicates to press and hold down the button
until operation starts or the screen changes.
The left example indicates to press the button
for 2 seconds.
Special instructions, supplementary
explanations, limitations, and reference pages
are described.
General precautions and reference pages are
shown on the item.
The initial value of each setup is shown.
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Use
Handling discs
2WARNING
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• When removing discs from this unit, pull them out
horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
How to reset your unit
• If the unit or the connected unit fails to operate
properly, press the Reset button. The unit returns to
factory settings when the Reset button is pressed.
• Remove the USB device before pressing the Reset
button. Pressing the Reset button with the USB
device installed can damage the data contained in
the USB device. For how to remove the USB device,
see <How to Set a Medium / a Device> (page 13).
Discs that cannot be used
• Discs that are not round cannot be used.
• When the unit is turned on after pressing the Reset
button, the Initial SETUP screen is displayed. (page
85)
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a disc that has not been finalized.
(For the finalization process refer to your writing
software, and your recorder instruction manual.)
• If you try to load a 3-inch-disc with its adapter into
the unit, the adapter might separate from the disc
and damage the unit.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
Other notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
¤
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
• The RDS or RBDS feature won’t work where the
service is not supported by any broadcasting
station.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
disc player of the unit. Called lens fogging, this
condensation on the lens may not allow discs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
6
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About Audio files
List of playable discs
•
Playable Audio file
Disc
types
DVD
Standard
Support
Remark
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), Linear
PCM (WAV) (.wav)
‡
×
DVD Video
DVD Audio
DVD-VR
⁄
‡
Not compatible with CPRM.
•
If music of normal CD and other playback systems are
‡
DVD-R
MP3/WMA/AAC/WAV/
JPEG/MPEG/DivX Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Compatible with 8-cm (3
inch) discs
recorded in the same disc, only the playback system
recorded at the first setout is played.
Acceptable media
‡
‡
‡
DVD-RW
DVD+R
•
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, SD/SDHC card, iPod with KCA-iP301V
DVD+RW
•
•
Playable disc file format
‡
‡
×
‡
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Playable USB device or SD card file system
FAT16, FAT32
Only video format
CD
Music CD
CD-TEXT/8-cm (3 inch)
discs supported.
MP3/WMA/AAC/WAV/
JPEG/DivX playback
Multisession supported
Packet write not supported.
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
‡
‡
‡
‡
‡
×
CD-ROM
CD-R
•
Playing order of the Audio file
CD-RW
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
<
v
:
:
FFolder
Audiofile
CD
(ꢂ)
×
%
vꢀ
ꢁ
CD-EXTRA
Only music CD session can
be played.
Sound quality of normal
CD music
ꢃ
%
HDCD
vꢆ
vꢇ
CCCD
×
×
%
ꢅ
vꢄ
ꢈ
Others
Dualdisc
Super audio CD
Only CD layer can be
played.
vꢉ
v.
‡: Playback is possible.
%: Playback is partly possible.
An online manual about audio files is put on the
manual, detailed information and notes which are
not written in this manual are provided. Make sure
to read through the online manual as well.
× : Playback is impossible.
⁄
•
When buying DRM enabled contents, check the
Registration Code in the <DivX Setup> (page 59).
Registration Code changes each time a file with the
displayed Registration Code is played to protect against
copying.
About Video files
•
•
•
Acceptable video files
MPEG1, MPEG2, DivX
Extensions
mpg, mpeg, m1v, m2v, divx, div, avi
Acceptable media
Use of "DualDisc"
When playing a "DualDisc" on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, SD/SDHC card, iPod with KCA-iP301V
Acceptable discs, disc formats, USB device or SD card
file system, file and folder names and playing order
are the same as those for audio files. See <About
Audio files>.
(A "DualDisc" is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
Next page 3
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About Picture files
About USB device
• In this manual, the word "USB device" is used for
flash memories and digital audio players which
have USB terminals.
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
•
•
•
Acceptable picture files
JPEG
Extensions
jpg, jpeg
Acceptable media
CD-R/RW/ROM, DVD R/RW, mass-storage-class
USB device, SD/SDHC card
Acceptable discs, disc formats, USB device or SD card
file system, file and folder names and playing order
are the same as those for audio files. See <About
Audio files>.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (1st generation)
• iPod nano (3rd generation)
• iPod with video
• iPod touch (1st generation) • iPod touch (2nd generation)
Works with
• iPod nano (2nd generation)
• iPod nano (4th generation)
• iPod classic
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
• iPhone
• iPhone 3G
About SD card (DDX7 models only)
• This unit is capable of playback of SD/SDHC
memory cards complying with the SD or SDHC
standard.
• A special adapter is required to use a miniSD card,
miniSDHC card, microSD card or microSDHC card.
• Update iPod/iPhone software to the latest version.
• You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP301V). The word
"iPod" appearing in this manual indicates the iPod/
iPhone connected with the KCA-iP301V (optional
accessory).
• By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCA-
iP301V), you can supply power to your iPod/iPhone
as well as charge it while playing music. However,
the power of this unit must be on.
• The MultiMedia Card (MMC) cannot be used.
Navigation units that can be connected to
this unit (DDX models only)
• KNA-G430
• KNA-G431
• Update the navigation software to the latest
version. For how to update the software, refer to the
instruction manual of the navigation unit.
⁄
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
Bluetooth unit that can be connected to
this unit (DDX6 models only)
• KCA-BT200
In this case, "RESUMING" is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
• When the iPod is connected to this unit,
"KENWOOD" or "✓" is displayed on the iPod to
indicate that you cannot operate the iPod.
TV tuner that can be connected to this unit
• KTC-V300N
• KTC-V300P
8
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
1
5
2
1
2
1
4
5
2
4
DVD disc marks
Operation regulatory marks
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Symbol
Description
Indicates a region number. The discs with this mark can
be played with any DVD player.
ALL
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
Prohibition Mark
8
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
32
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
9
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
16:9 LB
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the buttons on the front panel
For DDX models
TOP
ATT
VOLUME
AUD
NAV
SRC
TEL
ꢂ
C
G
A
B
D
E
F
Reset button
(page 6)
Remote control
sensor
SI indicator (page 62)
1 sec. : Press for more than 1 second
Attenuation of the volume On/Off.
A
1 sec. Switches the source that is output at the AV OUTPUT
terminal.
Volume adjustment.
B
C
⁄
Displays Graphic Equalizer/ Tone Control screen.*1
ET
1 sec. Rear view display On/Off.*2
*1 The display may not switch to
Graphic Equalizer screen in some
conditions
*2 The function of the [AUD] button
can be changed to the display off
function. See <User Interface> (page
60).
D
DNX models
Displays the navigation screen.
When the navigation screen has already been displayed, it switches
to the currently selected source screen.
1 sec. Picture in Picture function On/Off. !
DDX models
Displays the Top Menu screen. %
Turns the power On.
E
Displays the Source Select screen. @
1 sec. Turns the power Off.
10
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions of the buttons on the front panel
F
DNX models
Hands Free control screen On/Off.
1 sec. 7While watching the navigation screen or playback
screen of a visual source
Displays the Easy Control screen. &
7While watching the screen other than the above
Screen Switching function On/Off. !
DDX models
Hands Free control screen On/Off.
1 sec. While watching the navigation screen or playback
screen of a visual source
Displays the Easy Control buttons. &
Opens the panel and ejects the disc.
Closes the panel.
G
1 sec. Opens the panel fully for loading/ejecting an SD
card.
DNX models
Picture in Picture function
Two screens, the navigation screen and source screen, are displayed. When Picture in Picture
function is on, touching the source screen switches between the R-CAM image and source image.
NAV
1 sec.
Screen Switching function
Switching between the navigation screen and the source control screen with one touch operation.
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
How to Display the Navigation Screen
How to Select the Source
Sources can be selected from the Source Select
screen.
DNX models
Source Select screen (Example)
NAV
The navigation screen appears.
DDX models
TOP
SRC
The Source Select screen appears.
Touch the icon of the source.
Use
or
to turn the page.
For how to operate each source, see the
following pages.
DVD-VIDEO/ DVD-VR/
Video CD disc
\Page 18
The navigation screen appears.
CD
\Page 22
Audio file/ Video file/
Picture file disc
•
For how to set up and use the navigation function,
see the Navigation Instruction Manual.
\Page 22
\Page 28
\Page 22
\Page 22
\Page 31
\Page 36
\Page 40
iPod
⁄
•
USB
For DDX models, an optional navigation system needs
SD
to be connected. See <Navigation unit that can be
connected to this unit> (page 8) for connectable
navigation units.
TUNER
TV
Bluetooth
⁄
•
For Disc media, iPod, USB and SD, the input is switched to
the source as the media or the device is set.
12
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
7SD card (DNX/ DDX7 models only)
For DNX models:
Update the navigation software.
How to Set a Medium / a Device
7Disc media
For DDX7 models:
Audio File Listening & Video File/ Picture
File Watching
0
Press the [0] button to open/close the front
panel.
ꢂ
If a disc is already inserted, it is ejected by
pressing the [0] button.
Press the [0] button for more than 1 second
to open the front panel.
7iPod
Inserting the SD card
Hold the SD card with the label side up
and the notched section on the right, and
insert it into the slot until it clicks.
Removing the SD card
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 29).
Press the [0] button to close the front panel.
⁄
•
For DNX models:
7USB device
For how to update the software, refer to the
instruction manual of the navigation unit.
For DDX7 models:
•
After inserting the SD card, select the SD source on
the Source Select screen.
⁄
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 22).
•
The playback starts automatically after setting the media
or the device.
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Display the Source Control Screen
On the Source Control screen you can find all the
control buttons for the selected source.
Source Control Screen
The Source Control Screen appears.
DNX/DDX models
While watching the Easy Control Screen
•
For how to use each button, see the operation pages
of each source.
TEL
How to display the Source Control screen
DNX models
1 sec.
While watching the navigation screen
The Source Control Screen appears.
⁄
The Source Control Screen appears.
•
The screen will return to the navigation screen by
touching the same part of the Source Control screen.
DDX models
TOP
14
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Buttons on the Top Menu screen
How to Display Top Menu Screen
[NAV
]
Switches to the navigation screen.
Top Menu Screen is the entrance to all the
functions. You can enter source operation screen
as well as various setup menu from this screen.
[SRC
]
Switches to the source control screen
of the selected source.
[TEL
]
Switches to the Hands Free Main
Top Menu screen
screen. (page 45)
[NAV SETUP] Displays Navigation SETUP screen.
(Instruction manual of the Navigation part)
(DNX models only)
[SRC SETUP] Displays SETUP Menu screen. (page
58)
[TEL SETUP] Displays the Hands Free Setup
screen. (page 48)
[
]
Displays Audio Control Menu screen. (page
53)
[
[
]
Displays Source Select screen.
Displays the EXT SW (External Switch)
How to display the Top Menu screen
]
Control screen. (page 41) (DNX/ DDX7 models
only)
The buttons listed below are common for
many screens.
[MENU] Displays Top Menu screen.
[
]
Opens the function bar. The buttons shown
below appear.
[
[
[
[
]
Displays the currently selected source
Displays Audio Control Menu screen.
screen.
Touch the [MENU] button on any screen.
]
(page 53)
]
Displays SETUP Menu screen. (page
58)
The Top Menu Screen appears.
]
Displays the EXT SW (External
Switch) Control screen. (page 41) (DNX/
DDX7 models only)
]
•
For DDX models
Pressing the [TOP] button on the front panel also
displays the Top Menu Screen.
[
Closes the function bar.
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Operation on the Playback Screen of
Visual Sources
How to display the playback screen
SRC
While watching visual sources, basic operation is
possible by touching the screen.
The screen has 4 function areas. The function of
each area is different depending on the sources.
(Some areas are unavailable for some sources.)
Playback screen of a visual source
The Source Select screen appears.
Touch the icon of the source.
2
1
3
The Playback screen of a visual source appears.
4
Basic operation of each area
1
Reverse search.
2
Displays Menu control screen (DVD-VIDEO,
DVD-VR source), Picture control buttons
(sources with picture files), or Zoom control
buttons (Video CD).
Switches TV band.
3
4
Forward search.
Displays/ Clears source information screen.*
•
For the function of each touching area, see the pages
of each source.
* Source information screen
2
1
3
4
⁄
•
The information display is cleared automatically after
approximately 5 seconds.
16
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
How to Display the Easy Control Screen
Basic operation buttons of the selected source
can be displayed on the playback screen of
visual sources so that you can control the source
without switching the screen.
Easy Control Screen
Buttons on the Easy Control Screen
[∞] Changes the function as follows by touching
the [∞] button.
[SCRN] Displays Screen Control screen (page
43).
[TEL] Switches to the Hands Free Main
screen (page 45).
[EXT SW] Switches to the EXT SW Control
screen (page 41). (DNX/ DDX7 models
only)
[4], [¢], [7], [£8]
Buttons for source control. The buttons are
different depending on the source. See the
operation pages of each source.
While watching the visual source
TEL
1 sec.
The Easy control screen appears.
⁄
•
Easy Control screen is hidden when you touch the central
part of the monitor.
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
You can play DVD/Video CD using various functions.
•
Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller mode switch>
(page 79).
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the Playback Screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control buttons>
(page 17).
Operation on the Playback Screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 3
Searches for a chapter.
Searches for a chapter.
1, 2 Switches to the Playback Screen.
DVD-VIDEO
DVD-VR
3
Displays the Source Control Screen.
Selects a scene (when PBC is
On) or a track (when PBC is Off).
Video CD
[4], [¢] Searches for a chapter/ scene/
track.
2
Displays the Menu Control 1 Screen
(page 20).
Displays the Menu Control Screen
(page 21).
Displays the Zoom Control Screen
(page 21).
DVD-VIDEO
DVD-VR
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it in the next
time.
Video CD
[38] Plays or pauses.
4
Displays/ Clears Source Information Screen.
⁄
Source Control Screen
•
The information display is cleared automatically after
approximately 5 seconds.
Switches to the source control screen to use
various playback functions.
1
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
18
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Operation on the Source Control Screen
Multi Function
DVD-VIDEO/DVD-VR
1
[
]
Closes the multi function bar.
DVD-VIDEO
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Chapter Repeat, Repeat Off
Video CD
1
[TIME] Switches the play time display in the
following sequence.
Chapter ("C"), Title ("T"), remaining titles ("R")
DVD-VR
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Repeat Off
[38] Plays or pauses.
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it in the next
time.
[TIME] Switches the play time display in the
following sequence.
Title ("T"), remaining titles ("R")
[PLST] Switches between the original mode
and Play list mode.
[0] Ejects a disc.
Video CD
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢]
[REP] Switches the Repeat Play operations in
the following sequence.
Track Repeat, Repeat Off (Available when the
PBC is off)
Searches for a chapter.
DVD-VIDEO
Searches for a chapter.
DVD-VR
Selects a scene (when PBC is On) or a
track (when PBC is Off).
Video CD
[TIME] Switches the play time display in the
following sequence.
Track ("P"), remaining discs ("R") (Effective only
when the PBC function is off)
[
], [
]
Slow Forwards or
DVD-VR
DVD-VIDEO
,
Backwards.
[
1
]
Switches to the playback screen.
[PBC] Turns the PBC On or Off. (only when VCD
Ver 2.0 is in use)
Information display
Title display.
"Title" Title Number Display
"Chap" Chapter Number Display
"Scene" Scene/Track Number Display
"3" Play Mode Display
"T"/ "C"/ "R"/ "P" Play Time Display
Use the [TIME] to change play time
display.
[
]
When
is appeared, the text display is
scrolled by touching it.
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching DVD/Video CD
DVD-VIDEO Disc Menu
Selects an option from the DVD-VIDEO Disc
Menu.
1
2
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
⁄
Display the Menu Control 1 screen
•
•
•
Touching the central part of the monitor also turns on
the Highlight Control.
To cancel Highlight Control, press the [TEL] button for
more than 1 second.
The Highlight Control is cleared automatically after
approximately 10 seconds.
5
Operation on the Menu Control 2 screen
3
Operation on the Menu Control 1 screen
[Menu] Calls the Menu.
[Next] Displays the Menu Control 2 screen.
[2], [3], [5], [∞] Selects a menu option.
[Enter] Enters your menu selection.
[Return] Returns to the previous menu screen.
[Top] Displays the Top Menu.
[Previous] Displays the Menu Control 1 screen.
[Angle] Switches the picture angle.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Zoom] Displays the Zoom Control screen.
[Exit] Exits the Menu Control 2 screen.
[Highlight] Highlight Control.
[Exit] Exits the Menu Control 1 screen.
6
Operation on the Zoom Control screen
4
Operation on the Highlight Control
Highlight control lets you control DVD Menu
by touching the menu button directly on the
screen.
20
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off) each time you
touch.
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
[Return] Returns to the previous screen.
[Exit] Exits the Zoom Control screen.
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off) each time you
touch.
DVD-VR Menu Control
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
Selects an option from the DVD-VR Disc Menu.
1
Display the playback screen
[Return] Returns to the previous screen.
See <Operation on the Playback Screen of Visual
Sources> (page 16).
[Exit] Exits the Zoom Control screen.
2
Display the Menu Control screen
Video CD Zoom Control
Displays an enlarged VCD screen.
1
Display the playback screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Display the Zoom Control buttons
3
Operation on the Menu Control screen
3
Operation on the Zoom Control screen
[Zoom] Displays the Zoom Control screen.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
4
Operation on the Zoom Control screen
[Zoom] Changes the zoom ratio at 2 levels (2
times or off) each time you touch.
[2], [3], [5], [∞] Scrolls the screen in the
direction you touch.
[Exit] Exits the Zoom Control screen.
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening &
Video File/ Picture File Watching
You can recall various control screens during playback of CD, audio file, video file and picture file.
•
•
See <List of playable discs> (page 7) for playable discs.
See <About Audio file> (page 7), <About Video files> (page 7) or <About Picture files> (page 8) for playable files.
[List]
Displays the folder list or play list. (page 23)
Switches to the playback screen.
Information display
Selects the Disc Text or Track Text.
,
,
Source Control Screen
Audio File MPEG/DivX®
JPEG
Switches to the source control screen to use
various playback functions.
[
1
]
1
2
Display the Source Control Screen
CD
See <How to Display the Source Control
Screen> (page 14).
,
,
Audio File MPEG/DivX®
JPEG
Selects Folder Name, File Name, Title,
Artist Name, or Album Name.
Operation on the Source Control screen
"Track" Track Number Display
CD
"
"
"
Folder Number Display
File Number Display
1
"
"#### / ####" Total number of file in the
folder and the file number display
"3" Play Mode Display
"P"/ "R" Play Time Display
Use the [TIME] to change play time
display.
Audio File
MPEG/DivX®
JPEG
[
]
When
is appeared, the text display is
1
scrolled by touching it.
Multi Function
[38] Plays or pauses.
[7] Stops playing.
Disc
When touched twice, the disc is played from
its beginning when you play it in the next
time.
[1/2] Switches the multi function display.
[0]
Ejects the disc.
Removes the USB device/ SD
Disc
USB/SD
card.
[
]
Closes the multi function bar.
CD
When "No Device" is shown, the USB
device/ SD card can be removed safely.
If you wish to play it again while the
USB device is connected, touch it
again.
[REP] Repeats the present track.
[RDM] Starts or stops Random Play (to play
music in random order).
[TIME] Switches the play time display between
Track ("P"), and Disc Remaining Time ("R").
[1], [¡]
,
,
CD
Audio File MPEG/DivX®
Audio File
MPEG/DivX®
JPEG
Fast Forwards or Fast Backwards.
[REP] Repeats the present file or data.
[FREP] Repeats the music or data of the
present folder.
[4], [¢] Selects a track/ file.
[
], [
]
,
,
Audio File MPEG/DivX®
JPEG
Selects a folder.
22
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[RDM] Starts or stops Random Play (to play
files of the present folder in random order).
3
Select a song
Folder list
Disc/USB/SD
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[FOLD]/ [Flist] Displays the folder list.
1
[Plist]
in
Audio File
USB/SD
Displays the play list.
[SLIDE]
,
Displays images in
JPEG
Audio File
the folder currently being played one after
another.
If there is no image in the folder currently
being played, initial background is displayed.
For information on setting the image display
time, see <Disc Setup> (page 76) or <USB/ SD
Setup> (page 77).
1
Folder opens when touched, and the Audio
file is played.
When
[
]
is appeared, the text display is
scrolled by touching it.
[
[
[
[
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
[INFO]
Displays music information
Audio File
(such as Tag and content property) of Audio
file being played.
TOP]
Moves to the top folder.
USB/SD
,
Displays information of file
MPEG/DivX®
JPEG
CUR] Displays the currently playing folder.
being played.
[CTRL] Returns to the Source Control screen.
[LINK]
in
Searches for another
USB/SD
Audio File
song of the currently selected artist. See <Link
Search> (page 25).
Play list
in
Audio File
USB/SD
[DEVICE]
Selects the connected USB
USB
device (or a partition). (page 24)
1
List Select
Folder list: Searches folders and Audio/ Video/
Picture files stored in media and devices
according to hierarchy.
Play list: Lists and searches music contained in the
USB device or SD card.
1
Switches to the lower level of the category.
When is appeared, the text display is
[
]
scrolled by touching it.
[
[
ALL] Lists all the music in the selected
category.
1
Display the Source Control Screen
See <Source Control Screen> (page 22).
UP] Moves to the upper level of the
category.
2
Start List Select
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
Disc
category.
[CTRL] Returns to the Source Control screen.
USB/SD
⁄
•
Touching [List] displays the previously used Folder
list or Play list.
Next page 3
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Scrolls to the position of the specified initial
USB device select
Selects the connected USB device (or a partition).
1
2
Display the Source Control Screen
See <Source Control Screen> (page 22).
Display the USB Mount Device Select
Screen
Scrolls to the selected initial.
3
Select a USB device
1
1
[
Selects a device or partition.
UP] Returns to the Device Selection screen.
[
]
When
is appeared, the text display is
scrolled by touching it.
[CTRL] Returns to the Source Control screen.
24
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Link search (Audio File in USB/SD)
Playback Screen (Video file, Picture file)
Searches for another song of the currently
selected artist.
Basic functions are available even when the
playback screen is displayed.
1
Display the Source Control Screen
1
2
Display the Playback Screen
See <Source Control Screen> (page 22).
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Start Link search
Operation on the Playback Screen
2
1
3
4
3
Select a song
1, 3 Searches for a file.
2
Displays the Picture Control Screen
(page 26).
JPEG
1
Displays the Menu Control Screen
(page 27).
MPEG/DivX®
4
Displays/ Clears Source Information Screen.
⁄
1
Plays the touched song.
When is appeared, the text display is
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
[
]
scrolled by touching it.
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Easy Control Screen (Video file, Picture
file)
Picture Control
Adjusting the video display.
Displays the basic operation buttons on the
screen.
1
Display the Playback Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
1
2
Display the Easy Control Screen
See <How to Display the Easy Control Screen>
(page 17).
2
Display the Picture Control Screen
Operation on the Easy Control Screen
1
2
3
3
Adjust the video display
1, 2 Switches to the Playback Screen.
3
Displays the Source Control Screen.
[4], [¢] Searches for a file.
[7] Stops playing.
Disc
When touched twice, the disc is played from
its beginning when you play it in the next
time.
[
[
[
]
]
]
Reverses the picture horizontally.
Rotates counter clockwise.
Rotates clockwise.
[38] Plays or pauses.
[Exit] Ends Picture Control.
26
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Menu Control
Selects an option from the Movie Menu.
1
Display the playback screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
2
Display the Menu Control screen
3
Operation on the Menu Control screen
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Control
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the Playback Screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control Screen>
(page 17).
Operation on the Playback Screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 2 Switches to the Playback Screen.
1, 3 Selects the music/video.
3
Displays the Source Control Screen.
2
Not effective
Displays/ Clears Source Information Screen.
[4], [¢] Music/Video Search.
4
[38] Plays or pauses.
⁄
•
•
•
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
If the played song is not a video content, "No Video
Signal" is displayed on the video screen.
28
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[ARDM] Starts or stops Album Random Play
(plays randomly from current album).*
Source Control Screen
Switches to the source control screen to use
various playback functions.
[INFO] Displays information screen of music/
video being played.
1
2
Display the Source Control Screen
[LINK]
Searches for another song of
MUSIC
the currently selected artist. See <Link Search>
(page 30).*
See <How to Display the Source Control
Screen> (page 14).
⁄
Operation on the Source Control Screen
* Disabled when VIDEO is being played.
1
iPod List
Lists and searches music/video contained in the
iPod.
1
Display the Source Control Screen
[38] Plays or pauses.
See <Source Control Screen> (page 29).
[1], [¡] Fast Forwards or Fast Backwards.
[4], [¢] Selects Music/Video.
[List] Displays the iPod list. (page 29)
2
Display the iPod List
[
1
]
Switches to the playback screen.
Information display
Selects the Title, Artist Name, Album Name
or iPod Name.
3
Select music/video
"##### / #####" Total number of music in
the iPod and the music number display
1
"3" Play Mode Display
"P" Play Time Display
[
]
When
is appeared, the text display is
scrolled by touching it.
Multi Function
1
Categories and music are listed.
Touch a category name to move its lower
level. If music title is displayed, the music is
played by touching it.
When [38] is appeared, all the music in its
category is played by touching the button.
[
]
When
is appeared, the text display is
scrolled by touching it.
[
[
[
UP] Returns to previous category.
TOP] Moves to the top category.
CUR] Displays the currently playing
[1/2] Switches the multi function display.
[
]
Closes the multi function bar.
category.
[MUSIC] Displays the list of music category.
[VIDEO] Displays the list of video category.
[REP] Repeats the present file or data.
[RDM] Starts or stops Random play.*
[CTRL] Returns to the Source Control screen.
Next page 3
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod Control
Scrolls to the position of the specified initial
Link search (Music file)
Searches for another song of the currently
selected artist.
1
Display the Source Control Screen
See <Source Control Screen> (page 29).
2
Start Link search
Scrolls to the selected initial.
3
Select a song
1
1
Plays the touched song.
When is appeared, the text display is
[
]
scrolled by touching it.
[
[
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
30
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
Various control screens appear in the Tuner Source mode.
•
Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller mode switch>
(page 79).
Multi Function
Source Control Screen
Switches to the source control screen to use
various functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control screen
1
[1/3] Switches the multi function display.
[
]
Closes the multi function bar.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[TI] Turns the Traffic Information function On
or Off.
See <Traffic Information>, (page 34).
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 32).
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[List] Display the Tuner Preset List Screen.
(page 32).
1
Information display
Selects the Program Service Name, Title &
Artist name, Radio Text Plus, or Radio Text.
[PTY]
Searches station by program
FM
type. See <Search for Program Type> (page
35).
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[MONO]
reception. (Region 2/ 3 models only)
[CRSC] Turns the CRSC function On or
Select the Monaural
FM
FM
Off. (Region 4/ 6 models only)
[
]
When
is appeared, the text display is
scrolled by touching it.
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 32) or <Manual
Memory> (page 33).
[LO.S] Turns the Local Seek function ON or Off.
(Region 2/ 3 models only)
Next page 3
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
[NAME] Sets a name to the station. See <Set
Station Name> (page 34). (Region 4/ 6 models
only)
Auto Memory
Stores stations with good reception in memory
automatically.
[TEXT]
Displays Radio Text screen. See
FM
1
Display the Source Control Screen
<Radio Text> (page 33). (Region 2/ 3 models
only)
See <Source Control Screen> (page 31).
2
Select a band you wish to store in memory
Preset Select
Lists and selects memorized station.
1
2
Display the Source Control Screen
See <Source Control Screen> (page 31).
Display the Tuner Preset List Screen
3
4
Select the Auto Memory mode
3
Select a station
1
Start Auto Memory
1
Memorized stations are displayed. Touch to
tune in.
[CTRL] Returns to the Source Control screen.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
32
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Memory
Radio Text (Region 2/ 3 models)
Stores the current receiving station in memory.
You can display the radio text. (Only when
receiving the FM broadcast)
1
2
Display the Source Control Screen
1
Select a station
See <Source Control Screen> (page 31).
See <Source Control Screen> (page 31).
Select a station you wish to store in
memory
2
Display the radio text
3
Store in memory
1
2 sec.
1
Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus, or
Radio Text for text display.
Continue to touch until the memory number
appears.
[
]
When
scrolled by touching it.
[5], [∞] Scrolls the text display.
is appeared, the text display is
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Listening
Set Station Name
(Region 4/ 6 models)
Traffic Information (Region 2/ 3 models)
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
Assigns a name to a station.
1
2
Tune in to the station to name
1
Display the Source Control Screen
See <Source Control Screen> (page 31).
See <Source Control Screen> (page 31).
Start Name set
2
Set the Traffic information mode
3
4
Enter the name
See <Character Entry> (page 41) for information
on how to enter a name.
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
End Name set
Traffic Information screen
⁄
•
It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
•
During reception of traffic information the adjusted
volume is automatically remembered, and the next time
it switches to traffic information it's automatically the
remembered volume.
34
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Search by Program Type
(Region 2/ 3 models)
Frequency Step Setting
(Region 4/ 6 models)
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1
Display the Source Control Screen
1
Switch the frequency step
See <Source Control Screen> (page 31).
While pressing [NAV] (DNX models)/ [TOP] (DDX
models) button and [0] button, press the Reset
button.
2
Enter Program Type Search mode
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.
3
Select a Program Type
1
1
Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
4
Search a station of the selected Program
Type
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.
Function During TV Screen
Easy Control Screen
Basic functions are available even when the TV
screen is displayed.
Displays the basic operation buttons on the
screen.
1
2
Display the TV screen
1
2
Display the Easy Control Screen
See <Operation on the Playback Screen of Visual
Sources> (page 16).
See <How to Display the Easy Control Screen>
(page 17).
Operation on the TV screen
Operation on the Easy Control Screen
2
1
2
1
3
4
3
1, 2 Switches to the TV screen.
1, 3 Selects a channel.
3
Displays the Source Control Screen.
2
Switches to TV1 or TV2.
Displays/ Clears Source Information Screen.
[BAND] Switches to TV1 or TV2.
4
[4], [¢] Selects a channel.
Use the [SEEK] to change the channel tuning
sequence.
⁄
•
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
[SEEK] Switches the Seek mode. (page 37)
36
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
Source Control Screen
Switches to source control screen to use various
functions.
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
[PRE] Lists and selects memorized station.
[NAME] Sets a name to the station. See <Set
Station Name> (page 39).
Operation on the Source Control Screen
1
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 38) or <Manual
Memory> (page 38).
[BAND] Switches to TV1 or TV2.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
[List] Display the TV Preset List Screen. (page
39).
[
1
]
Switches to the TV screen.
Information display
Channel information display
"TV" Band display
"Group" TV Area Group Display. See <TV
Setup> (page 78).
"Preset" Memory Number Display
"ch" Channel display
[
]
When
is appeared, the text display is
scrolled by touching it.
Multi Function
[1/2] Switches the multi function display.
[
]
Closes the multi function bar.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 38).
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Watching
Auto Memory
Manual Memory
Stores stations with good reception in memory
automatically.
Stores the current receiving channel in memory.
1
2
Display the Source Control Screen
1
Display the Source Control Screen
See <Source Control Screen> (page 37).
See <Source Control Screen> (page 37).
Select a station you wish to store in
memory
2
Select a band you wish to store in memory
3
4
Select the Auto Memory mode
3
Store in memory
2 sec.
Start Auto Memory
Continue to touch until the memory number
appears.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
•
The operation ends automatically if you do not operate
within 10 seconds.
38
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Select
Set Station Name
Lists and selects memorized station.
Assigns a name to a station.
1
2
Display the Source Control Screen
1
2
Tune in to the station to name
See <Source Control Screen> (page 37).
See <Source Control Screen> (page 37).
Start Preset Select
Start Name set
3
Select a station
1
3
4
Enter the name
See <Character Entry> (page 41) for information
on how to enter a name.
End Name set
1
Memorized stations are displayed. Touch to
tune in.
Switches to the TV screen.
[CTRL] Returns to the Source Control screen.
[
]
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth Audio Control
DNX/ DDX7 models: You can listen to audio files stored in Bluetooth audio player and cell-phone.
DDX6 models: When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in
Bluetooth audio player and cell-phone.
•
You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction
manual of the Bluetooth Unit as well.
Before Use
•
You need to register your audio player and cell-phone
before using it with this unit. For more details, see
<Registering Bluetooth Unit> (page 67).
•
If you have registered two or more audio players or cell-
phones, you need to select one of them. For more details,
see <Bluetooth Unit Connection> (page 69).
Source Control Screen
Switches to control screen to use various
functions.
1
2
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control screen
[3] Plays.
[7] Stops playing.
[8] Pauses.
[4], [¢] Selects a file.
⁄
•
If the Bluetooth Audio player does not support AVRCP
profile, buttons are not displayed. Operate from the
Audio player.
40
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
External Device Power Supply Control
(DNX/ DDX7 models)
How To Use the Character Entry Screen
Character Entry screen
Controlling the external device power supply.
1
1
2
Display the Source Select Screen
See <How to Select the Source> (page 12).
Display the EXT SW Control screen
1
Enters characters.
[2], [3] Shifts the cursor.
[5], [∞] Scrolls up or down the character
button display.
[QWE]/ [ABC] Sets the key layout of the
character buttons.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
[Clear] Clears the character.
If you erase a character, locate the cursor on it
and touch this button.
3
Control the external device power supply
[Space] Enters a space.
⁄
•
You can enter characters only after you have applied the
parking brake.
You can turn on or off the external device power
supply.
⁄
•
You must connect a commercially available relay unit in
order to use this function.
Connect the external device to be controlled to that
relay unit.
•
Refer to <EXT SW Setup> (page 63) for information on
setting the power on or off specification.
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
Muting Audio Volume upon Reception of
Phone Call
When the telephone is called...
The Phone Call ("CALL") screen appears, and
system is paused.
Phone Call ("CALL") screen
When the call ends...
Hang up the phone.
The system resumes playing automatically.
⁄
•
To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to <INSTALLATION MANUAL>.
Playback of the source output at the AV OUTPUT port
may not be paused even a call comes in.
•
42
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Control
Setting the monitor screen.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting.
Screen Control
1
Display the Easy Control Screen
See <How to Display the Easy Control Screen>
(page 17).
[Mode] Selects a screen mode.
You can select any of the following screen
mode.
2
Display the Screen Control screen
"Full", "Just", "Zoom", "Normal"
⁄
•
The Screen Control screen is displayed only when you
have applied the parking brake.
•
•
The picture quality can be set for each source.
You can set image quality of screens such as menu from
<Screen Adjustment> (page 67).
3
Adjust the picture quality
Full picture mode ("Full")
Justify picture mode ("Just")
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
[Bright] Brightness Control
[Tint] Tint Control
Displayed for an NTSC system image on Video,
iPod, TV or Rear View Camera.
[Color] Color Control
Displayed on Video, iPod, TV or Rear View
Camera screen only.
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Sharpness] Sharpness control
Displayed on Video, iPod, USB or Rear View
Camera screen only.
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands Free Unit Control
Various functions can be used in the Hands Free control mode.
(DDX6 models: with the optional accessory Bluetooth unit connected only)
•
•
You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the
Bluetooth Unit as well.
To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of
your Bluetooth Unit and your cell-phone.
day to download the phone book depending on the
total image size.
To cancel downloading of the phonebook data, operate
the cell-phone.
Before Use
•
•
•
You need to register your cell-phone before using it with
this unit. For more details, see <Registering Bluetooth
device> (page 67).
If you have registered two or more cell-phones, you need
to select one of them. For more details, see <Bluetooth
Unit Connection> (page 69).
To use the Phone Book, it must be downloaded to this
unit in advance. For details, see <Downloading the
Phonebook> (page 44).
•
Receiving a Call
Downloading the Phonebook
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
[
[
]
]
Answering a Phone Call
Rejecting an Incoming Call
1
By operating the cell-phone, send the
phonebook data to this unit
During a Call
2
By operating the cell-phone, start the
hands-free connection
⁄
•
For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
•
•
•
For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
Up to 1000 phone numbers can be registered for each
registered cell-phone.
Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type of
characters.)
[
]
Switches the voice output between
phone and speaker.
[DTMF] Outputs dial tone. See <Controlling
Tone-based Services> (page 48).
[
]
Disconnecting a call
Adjusting the Voice Volume during a Call
•
Depending on the type of your cell-phone, the following
restrictions are placed:
- The phonebook data cannot be downloaded normally.
- Characters in the Phonebook are garbled.
- The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
44
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Preset1-3] Displays the preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
51).
Call Waiting
[
[
[
[
Phonebook] Displays the Search
for Phonebook screen. See <Calling by
Phonebook> (page 46).
Outgoing Calls] Displays the Outgoing
Calls screen. See <Making a Call Using Call
Records> (page 46).
[
[
]
]
• Answering another incoming call with
the current call suspended
• Switching between the current call and
waiting call
Each touch of this button switches the
calling party.
Incoming Calls] Displays the Incoming
Calls screen. See <Making a Call Using Call
Records> (page 46).
Missed Calls] Displays the Missed
Calls screen. See <Making a Call Using Call
Records> (page 46).
• Answering another incoming call after
terminating the current call
• Answering the waiting call after
terminating the current call
[Direct Number] Displays the Dialing Display
screen. See <Calling by Entering a Phone
Number> (page 46).
[Voice] Starts voice recognition.
See <Calling by Voice Recognition> (page 47).
Making a Call
[BT SETUP] Displays the Bluetooth SETUP
Displaying the control screen and using various
functions.
screen. (page 67)
[TEL SETUP] Displays the Hands Free Setup
screen. (page 48)
1
Display the Hands-Free Control screen
⁄
•
While your car is moving, some functions are disabled for
safety’s sake. The buttons associated with the disabled
functions become ineffective if pressed.
TEL
•
•
When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
* Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
the cell-phone. No status is displayed if information
about it cannot be obtained.
2
Select a dialing method
1
•
Setting the cell-phone in the private mode can disable
the hands-free function.
1
Calls the displayed phone number. If you
have registered a phone number in the
Phonebook, the destination person name is
displayed.
[
]
Calls the displayed phone number.
[Redial] Displays the previously called phone
number.
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands Free Unit Control
Calling by Phonebook
Calling by Entering a Phone Number
You can call a person using his/her phone
number that you have registered in the
Phonebook.
Makes a call by entering a phone number.
1
2
Display the Hands-Free Control screen
See <Making a call> (page 45).
1
Display the Hands-Free Control screen
Display the number input screen
See <Making a call> (page 45).
2
Display the Phonebook screen
3
Enter a phone number
3
Select the name to call
1
2
1
Calls the entered phone number.
[Clear] Clears the number.
4
Make a call
1
2
Phonebook data list.
Displays the Phonebook beginning with the
name whose first character you have touched.
When is appeared, the text display is
scrolled by touching it.
[
]
You can start talking when the destination
responds.
4
Select the phone number to call
⁄
•
You can input up to 32 digits.
Making a Call Using Call Records
Calls by selecting a phone number from the
outgoing, incoming, or missed calls list.
1
Display the Hands-Free Control screen
5
Make a call
See <Making a call> (page 45).
2
Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
⁄
•
To use the Phonebook, it must have been downloaded
from the cell-phone. For more details, see the instruction
manual of your Bluetooth Unit and your cell-phone.
Initials including no corresponding name will not be
displayed.
During search, a non-accent character such as "u" is
searched for instead of an accent character such as "ü".
•
•
46
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select from calls list
Example : Outgoing Calls screen
When a beep is heard, utter the category within
2 seconds.
If there are more than one phone numbers
registered under the same name, go to step 4.
4
Select a Phone number category
Calls the selected phone number.
4
Make a call
⁄
•
The Outgoing Calls list screen, Incoming Calls list,
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
Selects the Phone number category.
Calling by Voice Recognition
5
Make a call
Calls by recognizing the registered voice.
⁄
•
In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 49). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 50).
⁄
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
1
Display the Hands-Free Control screen
See <Making a call> (page 45).
2
3
Display the Voice Recognition screen
Utter the voice registered in the
Phonebook
When a beep is heard, utter the name within 2
seconds.
English
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands Free Unit Control
Controlling Tone-based Services
Setting Up the Hands-Free Phone
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
The Hands-Free system can be set as follows.
1
2
Display the Hands-Free Control screen
1
2
Display the Talking screen
See <Making a call> (page 45).
See <Calling by Entering a Phone Number>
(page 46).
Display the Hands Free Setup screen
Display the DTMF input screen
3
Set each item
3
You can send tones during a call
[Auto Response] Sets an automatic response
time after call termination. ( "OFF")
"OFF": This function can not use.
"0-99": Sets to calling ring time (second).
[Phone Voice] Sets a ringing tone output
position. ( "Front All")
"Front L": Outputs the tone from the front left-
hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
48
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Call Beep] Sets the beep of the incoming call.
"ON")
"ON": Beep is heard.
Voice Registration
(
Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. ( "ON")
1
Display the Phonebook Detail screen
"ON": Beep is heard.
"OFF": Beep is canceled.
Go through the procedure of <Calling by
Phonebook> (page 46).
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
2
Select the name to register
(
"ON")
"ON": Yes.
"OFF": No.
1
[SMS Use] Sets the SMS function. ( "ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See <Key Word Voice Registration> (page 50).
1
Selects a name.
[Record] Registers the voice for voice
recognition to the selected Phonebook. If
there are already 35 voice tag registered
in the same cell-phone, [Record] button is
deactivated.
[Use Phone Voice Recognition] Sets whether
to dial using the phone voice recognition
function. ( "ON")
[Echo Cancel] Sets whether to cancel echo.
[Play] Plays the voice registered in the selected
Phonebook data.
(
"ON")
[Microphone Level] Adjusts the sensitivity of
the built-in microphone for a telephone call.
[Delete] Deletes the voice registered in the
selected Phonebook data.
Touch to display the confirmation screen.
Touch [Yes] to delete or [No] to cancel.
(
"6")
[Noise Reduction] Reduces the noises
generated by the surrounding environment
without changing the microphone volume.
3
4
Display the voice registration screen
(
"ON")
[Restore] Restores the [Echo Cancel],
[Microphone Level], or [Noise Reduction] value
to the initial value.
Utter the voice to register (1st try)
⁄
•
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
•
Select the speaker which is further from the microphone
in order to prevent howling or echoes.
Utter within 2 seconds after the Beep.
Next page 3
English
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands Free Unit Control
5
6
Utter the voice to register (2nd try)
[Record] Registers voice for the selected
Phone number category.
Utter within 2 seconds after the Beep.
[Play] Plays voice registered for the selected
Phone number category.
End voice registration
[Delete] Deletes voice registered for the
selected Phone number category. Touch to
display the confirmation screen. Touch [Yes] to
delete or [No] to cancel.
4
5
Display voice registration screen
⁄
•
A message is displayed if the voice is not recognized.
Utter the voice to register (1st try)
Read the message for the further operation.
•
Repeat from 1st try if the voice is different from the 1st
try.
Key Word Voice Registration
Registers the voice to select the Phone number
category by Voice Recognition.
Utter within 2 seconds after the Beep.
1
2
Display the Hands Free Setup screen
6
7
Utter the voice to register (2nd try)
See <Setting Up the Hands-Free Phone> (page
48).
Utter within 2 seconds after the Beep.
End voice registration
Display the Key Word List screen
⁄
3
Select the Phone number category to
register
•
A message is displayed if the voice is not recognized.
Read the message for the further operation.
•
Repeat from 1st try if the voice is different from the 1st
try.
1
1
Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
50
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Search phone number to register with each
function
Phone Number Preset
Registers frequently used phone number to
Hands Free control screen preset button.
Register phone number
1
Display the Hands-Free Control screen
See <Making a call> (page 45).
2
Select the Preset number to register
SMS (Short Message Service)
Uses SMS function.
1 sec.
1
2
Display the Hands-Free Control screen
⁄
•
If no Preset number is registered, pressing this button
momentarily moves to the step 3.
See <Making a call> (page 45).
Display the SMS Select screen
3
Select the search destination of the number
to register
3
Select a function
[
[
[
[
]
]
]
]
Registers from Phonebook.
Registers from outgoing calls list.
Registers from incoming calls list.
Registers from missed calls list.
[Direct Number] Registers by entering phone
numbers.
[Voice] Registers voice for voice recognition to
preset number.
[
[
[
[
]
]
]
]
Displays the SMS create menu screen.
Displays received message list.
Displays sent message list.
[Memory] Registers the currently displayed
phone number.
Displays the SMS create menu screen.
[Delete] Deletes the currently displayed phone
number. Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to cancel.
The button will be active when any message
has been created after power-on.
[Download] Retrieves SMS messages from the
cell-phone.
Next page 3
English
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Hands Free Unit Control
4
Select a message to display
3
Create a message
1
1
1
Calls the number in the selected message.
1
Enters characters.
[DISP] Displays the selected message.
[2], [3] Moves the cursor.
[5], [∞] Scrolls up or down the character
button display.
SMS Message screen
[QWE]/ [ABC] Sets the key layout of the
character buttons.
ABC : Alphabetical key layout.
QWE : Qwerty key layout.
[Clear] Erases the entered character.
If touched more than 1 second, all the input
characters are erased.
Creates a new message for the selected
message.
[Space] Enters a space.
[SET] Determines the message and returns to
the SMS Create Menu screen.
Create a message
1 Input the destination
4
Send the message.
[
]
Select a destination from the
phonebook.
[Direct Number] Enter the phone number.
[SET] Display the Create SMS Message screen.
[Send] Sends the message.
[Delete] Deletes the Draft message.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
2
Display the Create SMS Message screen
52
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control
Audio Control Menu
Audio Control
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
1
Display the Source Select Screen
1
Display the Audio Control screen
Touch [ ] > [
] > [Audio Control]. (page 53)
SRC
2
Set each item
1
2
Display the Audio Control menu
DDX6 models
1
Adjusts the front/back and left/right volume
around the touched area.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
In this manual, the above selection is indicated
as:
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
Touch [ ] > [
].
3
Select the Audio Control item
⁄
•
If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Loudness] Turns the Loudness control
function On or Off. (DDX6 models only)
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable only when zone function is set to Off.
See <Zone Control> (page 55).
Item
Page
53
54
55
54
55
56
56
[Audio Control]
[Equalizer]
[Tone]
[EQ]
[Zone Control]
[Space Enhancer]
[Position]
Next page 3
English
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control
[Bass Boost] Sets the amount of bass boost.
(DNX/ DDX7 models only)
"OFF"/ "Step1"/ "Step2"
[SystemQ-Ex] Selects items to be adjusted for
tone curve setup. (DDX6 models only)
If turned "OFF", only Level can be setup for
tone curves.
[Stream Information] Displays the present
source information.
[EQ] Displays the Graphic Equalizer setup
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
screen. (page 54) (DNX/ DDX7 models only)
[Tone] Displays the Tone curve setup screen.
(page 55) (DDX6 models only)
Equalizer Control
Graphic Equalizer Setup (DNX/ DDX7
models)
You can set up the equalizer.
1
2
Display the Equalizer screen
You can Manually set the equalizer curve.
Touch [ ] > [
] > [Equalizer]. (page 53)
1
2
Display the Equalizer screen
Set each item
Touch [ ] > [
] > [Equalizer]. (page 53)
DNX/ DDX7 models
Display the Graphic Equalizer screen
⁄
•
When "iPod" is selected in <Equalizer Control>, the
[EQ] button is deactivated. "iPod" uses its equalizer
function.
DDX6 models
3
Set the Graphic Equalizer
1
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
1
Gain level can be adjusted by touching the
each frequency bar.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"*/ "iPod"*/ "User"
[2], [3] Sets a frequency.
[5], [∞] Sets a gain level.
⁄
[EQ Init] Returns to the previous level which
the gain level is adjusted.
•
•
* DNX/ DDX7 models only.
"User" can be selected after graphic equalizer
adjustment is carried out. See <Graphic Equalizer
Setup> (page 54).
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
If turned "ON", it extends the 62.5 Hz to the
low register by approximately 20%.
•
•
"User" can be selected after tone adjustment is
carried out. See <Tone Setup> (page 55).
When "iPod" is selected, the [EQ] button is
deactivated. "iPod" uses its equalizer function.
[SW Level] Adjusts the subwoofer volume.
54
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Tone Setup (DDX6 models)
Zone Control
You can set a Tone curve.
You can set the front and rear audio source.
1
2
Display the Equalizer screen
1
2
Display the Zone Control screen
Touch [ ] > [
] > [Equalizer]. (page 53)
Touch [ ] > [
] > [Zone Control]. (page 53)
Display the Tone Control screen
Set the Zone Control
3
Set the Tone
[Bass] Bass adjustment items are displayed.
[Middle] Middle adjustment items are
displayed.
[Treble] Treble adjustment items are displayed.
[Flat] Tone level becomes 0 (flat).
[FREQ] Sets the Center frequency.
[Level] Sets the level.
[Q Factor] Sets the Q factor. (Only [Bass] and
[Middle] can be set)
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
•
When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Bass DC EXT] Bass DC Extend settings. (Only
[Bass] can be set)
If turned "ON", it extends the bass center
frequency to the low register by approximately
20%.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
[SW Level] Adjusts the subwoofer volume.
•
There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 54), <Space Enhancer> (page
56), <Position> (page 56), <DSP Bypass Control> (page
71), <Speaker Setup> (page 72), and <Car Type (DTA)
Setup> (page 73) are not available.
English
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control
Space Enhancer (DNX/ DDX7 models)
Position (DNX/ DDX7 models)
You can enhance the soundscape.
You can adjust the sound effects according to
your listening position.
1
Display the Space Enhancer screen
1
Display the Position screen
Touch [ ] > [
] > [Space Enhancer]. (page
53)
Touch [ ] > [
] > [Position]. (page 53)
2
Set the Space Enhancer
2
Set the Position Control
1
1
Sets the soundscape level.
[P1] - [P3] Stores the present adjustment setup
in memory, or calls it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more than 2
seconds.
⁄
•
You cannot set Space Enhancer in tuner source.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment you
wish to call from memory.
[2], [3] Sets a listening position.
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front), and
"All" (All) positions.
[DTA] Displays the Position DTA (Digital Time
Alignment) screen.
3
Exit Position Control
⁄
•
The final distance is adjusted to the total of Car Type Set
Up value (page 73) and Position Setup (both Position and
Position DTA) value.
•
•
If you change the Car Type Set Up value (page 73), the
position is set to "All".
Only the adjusted distance of position setup (Position
and Position DTA values) is stored in memory. Therefore,
the final adjustment distance changes if you change the
Car Type Set Up value (page 73).
56
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Position DTA Control
You can fine-adjust your listening position.
1
Display the Position DTA screen
2
Select a speaker you wish to adjust
1
3
2
4
5
1
2
3
4
5
Left front speaker
Right front speaker
Left rear speaker
Right rear speaker
Subwoofer
[2], [3] Finely adjusts the value set with the
Position function.
[Total DTA] Indicates setup distance. The
adjusted distance (Position and Position
DTA values), and the total of the distance
adjusted by Car Type Set Up (page 73) and
the adjustment distance for position setup are
indicated.
3
Finely adjust the distance
Finely adjust the value set with the Position
function.
English
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
You can set up various receiver parameters.
How to Display SETUP Menu Screen
Item
Page
[Information]
[DivX(R)]
[Software]
[System]
Displays the Setup menu to set various functions.
59
59
1
Display the Source Select Screen
[User Interface]
[Touch]
[Clock]
[Security]
[Angle]
60
61
61
62
63
63
64
SRC
[EXT SW]
[SETUP Memory]
2
Display the Setup Menu Screen
[Display]
[Background]
[Color]
65
66
67
67
78
74
77
77
77
78
70
71
71
72
73
70
[Screen Adjust]
[Bluetooth SETUP]
[TUNER SETUP]
[DVD SETUP]
[iPod SETUP]
[USB SETUP]
[SD SETUP]
[TV SETUP]
[AV-IN SETUP]
[Navigation]
[Audio SETUP]
[Speaker Select]
[Car Type]
In this manual, the above selection is indicated
as:
Touch [ ] > [
].
3
Select the setup item
[AV Interface]
[5], [∞] Scrolls the setup menu.
⁄
•
[AV-IN SETUP], [Navigation] and [Audio SETUP] options
can be locked. The key mark ( ) is displayed in reverse
video for the locked option. See <Setup Memory> (page
64).
58
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX Setup
Software Information
Checks the registration code. This code is needed
when making a disc which has DRM (Digital
Rights Management).
Checks the software version of this unit.
1
Display the Software Information screen
Touch [ ] > [
] > [Information] >
1
Display the DivX Setup screen
[Software]. (page 58)
Touch [ ] > [
] > [Information] >
[DivX(R)]. (page 58)
Displays the software version.
⁄
Displays the registration code.
•
For how to update the software, refer to the relevant
update procedure manual which comes with the
software.
⁄
•
When downloading a DivX VOD file controlled by DRM,
register the code appeared on the screen such as the
one above. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is displayed
when playing a DivX VOD file with the viewing restriction.
When the remaining number of viewing reached 0, a
warning message appears and the file cannot be played.
English
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
User Interface
Language Setting
You can setup user interface parameters.
You can select the display language for the
control screen and audio file tags.
1
Display the User Interface screen
1
2
Display the User Interface screen
Touch [ ] > [
Interface]. (page 58)
] > [System] > [User
Touch [ ] > [
] > [System] > [User
Interface]. (page 58)
2
Set each item
Display the Language Setting screen
3
Select a language
[Beep] Turns the key touch tone On or Off.
"ON")
[Select Mode] Selects the mode to select a
language. ( "Easy") (DNX models only)
Touching [Advanced] allows you to select
languages for respective items.
(
[Remote Sensor] Selects a remote control
signal. ( "ON")
When turned "OFF", the remote control of TV
reception is rejected.
[Language Select] Selects a language.
(
"American English")
[Language] Select the language used for the
control screen and setting items. (page 60)
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.
[Scroll] Allows scrolling of text display on the
Source Control screen. ( "Manual")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
Advanced mode (DNX models only)
[Marker] Sets whether to display the target
when touching the panel.
[GUI Language Select] Selects the display
language used for the control screen and so
forth. ( "American English")
[Drawer Close] Sets whether to close the
function bar automatically. ( "Auto")
[Navigation Language Select] Selects the
language used for navigation.
[AUD Key Longer than 1 Second] Sets the
function of the [AUD] button. (page 10)
"V.OFF" : Press the [AUD] button for more than
1 second to turn the display off.
(
"American English")
"R-CAM" : Press the [AUD] button for more
than 1 second to switch to rear view.
60
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch Panel Adjustment
Clock Setup
You can adjust the touch panel operations.
You can adjust the clock time.
1
Display the Touch panel Adjustment screen
1
Display the Clock Setup screen
Touch [ ] > [
(page 58)
] > [System] > [Touch].
Touch [ ] > [
(page 58)
] > [System] > [Clock].
2
Adjust the Touch panel
2
Setup the Clock
1
2
Follow the instruction on the screen and touch
1
2
Adjusts hours.
Adjusts minutes.
the center of
.
[Cancel] Cancels the adjustment and returns
to the Touch Panel Adjust screen.
[Reset] Sets "00" minute.
Setup examples: 3:00 – 3:29 \3:00
3:30 – 3:59 \4:00
[Reset] Resets to the initial status.
[Synchronize] Sets the clock time in
synchronization with the time data sent from
the navigation system or the RDS station.
(
DNX models: "Navigation", DDX models:
"RDS")
"OFF"/ "RDS"*1/ "Navigation"
When the synchronized mode is set, the clock
cannot be adjusted manually.
(*1 Region 2/ 3 models only)
3
Adjust the clock time
English
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
5
6
Register your security code
Reenter the security code
Security Setup
You can set a security code to protect your
receiver system against theft.
⁄
•
When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
Reenter the same security code as that you have
entered in Step 4 for confirmation.
⁄
•
If you enter a different security code, the screen
returns to Step 4 (for the first code entry).
1
Display the Security screen
Touch [ ] > [
(page 58)
] > [System] > [Security].
7
Register the security code again
2
Setup the SI (Security Indicator)
Now, your security code is registered.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1
Enter the correct security code
[Security Code Set] Displays the Security code
input screen.
[SI] Turns the SI function on or off.
If turned "ON", the SI indicator on the front
panel flashes when the vehicle ignition is off.
(
"ON")
You must enter the same security code as that
you have entered in Step 4.
3
4
Start Security Code setup
2
Register your security code
⁄
•
If you have already completed the code registration,
[CLR] is displayed.
Now, you can use your Receiver.
Enter a security Code
Input four-digit number.
62
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Angle Control
EXT SW Setup
You can adjust the position of the monitor.
Setting up power specification of the external
device for which the power is controlled from this
unit. (DNX/ DDX7 models only)
1
Display the Angle Setup screen
Touch [ ] > [
] > [System] > [Angle].
1
Display the EXT SW Setup screen
(page 58)
Touch [ ] > [
(page 58)
] > [System] > [EXT SW].
2
Set the Monitor Angle
2
Perform EXT SW Setup
1
1
Sets the Monitor angle.
[Memory] Stores the current monitor angle as
the angle during power off.
[SW Name] Sets the name of the external
device. See <Character Entry> (page 41) for
information on how to enter the name.
[Output Pattern] Sets the power signal output
mode.
(
EXT SW1: Pulse, EXT SW2: Level)
"Pulse": Generates a single power signal pulse.
"Level": Continues output of high power signal.
Sets to turn output on/off each time
the button on the EXT SW Control
screen is touched.
[Pulse Set] Sets the Pulse signal output time.
Outputs 500ms when "1" is set. Increases by
200ms with each step. Up to 100 steps can
be set.
English
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
4
Memorize or recall the settings
Setup Memory
Audio Control, AV-IN SETUP, AV Interface,
Navigation, and Audio SETUP settings can be
memorized. The memorized settings can be
recalled at any time. For example, even when the
settings are cleared due to replacement of the
battery, the settings can be restored.
When memorizing the Audio Setup and AV
Interface settings:
If settings have already been memorized, a
confirmation message appears. Touch [Yes]. To
cancel memorization, touch [No].
1
Display the SETUP Memory screen
When recalling the memorized settings:
Touch [ ] > [
] > [System] > [SETUP
Memory]. (page 58)
2
Start Setup Memory
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel recalling, touch
[No].
When clearing the currently memorized
settings:
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
[Lock] Locks the AV-IN SETUP, Navigation,
and Audio SETUP settings. When [Lock] is
selected, you cannot change the AV-IN SETUP,
Navigation, and Audio SETUP settings.
5
Quit memorization/recalling of settings
[Yes] Memorizes or recalls the settings.
The SETUP Menu screen appears again.
[No] To cancel the function, touch [No]. To
cancel memorization, touch [No].
The SETUP Menu screen appears again.
3
Select a desired function
[Recall] Recalls the memorized settings.
[Memory] Memorizes the current Audio Setup
and AV Interface settings.
[Clear] Clears the currently memorized
settings.
64
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Load the image
Entering Background
Loads a image for background.
1
2
Connect the device which has the image
to load
1
Display the Background screen
Touch [ ] > [
] > [Display] >
[Background]. (page 58)
1
Rotates the image.
3
Display the Background Memory screen
⁄
•
•
•
See <About Picture files> (page 8) for readable image
specifications.
The [Memory] button on the “Background” screen
becomes active only in STANDBY source mode.
Pressing the [Memory] button on the “Background”
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
•
While loading the Background image, any other
operation is prohibited.
[Change] Selects a image for background.
[Delete] Deletes the background image.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
Background Change
Selects a image for background.
1
Select Background Change screen
4
Select a medium
2
Select a image for background
1
5
Select the image to load
1
1
Returns to the initial background.
3
Set the image as the background
1
Lists the files.
When is appeared, the text display is
[
]
scrolled by touching it.
[
[
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
English
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
To register your original color
Panel Color Coordinate
1
Start the RGB coordinate
Sets the screen and button illumination color.
1
Display the Color screen
Touch [ ] > [
] > [Display] > [Color].
(page 58)
2
Adjust the each color value
2
Display the Panel Color Coordinate screen
1
1
Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
[Blue Value] Adjusts the Blue value.
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the screen and buttons
changes one after another.
3
Select a Preset number to register
⁄
•
When touching [SET], make sure [Panel Color Scan]
is set to "OFF".
3
Select a color
2 sec.
1
Adjusted color is registered to the selected
Preset button.
4
Complete the color coordination
1
Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
66
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Adjustment
Registering Bluetooth Unit
You can adjust the screen mode of the monitor.
Registers the Bluetooth unit to be connected.
1
Display the Screen Adjust screen
1
Display the Bluetooth Setup screen
Touch [ ] > [
Adjust]. (page 58)
] > [Display] > [Screen
Touch [ ] > [
(page 58)
] > [Bluetooth SETUP].
2
Set each item
2
Display the Connect Device List screen
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup ( "ON")
"ON": The display dims.
3
Search for a Bluetooth unit
1
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
1
Displays the registered Bluetooth units.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
The busy service becomes active. The available
service becomes inactive.
Navigation Day/Night display
setting.
[
]
When
is appeared, the text display is
scrolled by touching it.
⁄
[Search] Searches for a Bluetooth unit.
•
In this Screen Adjust screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 43).
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(paring) operation.
⁄
•
A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Bluetooth Unit Connection> (page
69).
Next page 3
English
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
4
Select the Bluetooth unit to register
Registering Special Bluetooth Unit
Registers Special Bluetooth unit that results in
error by normal operation by selecting from
model name.
1
1
Display the Special Device List screen
2
Select a model name
1
Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
5
Enter PIN code
1
Displays the Bluetooth unit name that can be
registered.
3
Confirm whether to register
1
Enters a code number.
[Enter] Enter the PIN code specified for the
Bluetooth unit to register.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
⁄
⁄
•
Only models in Bluetooth unit name list can be
registered.
•
You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 69).
4
Go through the procedure of <Registering
Bluetooth Unit> and complete the
registration (pairing).
•
If the error message appears even though the PIN code is
correct, try <Registering Special Bluetooth Unit>.
68
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
Sets the PIN code of the Bluetooth unit to enter
when registering (pairing) from the cell-phone or
audio player side.
Selects the Bluetooth unit to connect.
1
Display the Bluetooth Setup screen
Touch [ ] > [
] > [Bluetooth SETUP].
1
Display the Bluetooth Setup screen
(page 58)
Touch [ ] > [
(page 58)
] > [Bluetooth SETUP].
2
Display the Connect Device List screen
Select a registered Bluetooth unit
Select the service to use
2
Display the Receiver PIN Code screen
3
3
Enter PIN code
1
4
1
Enters a code number.
[Cancel] Cancels registration of PIN code.
[Enter] Enters PIN code.
[Clear] Clears the code number.
[TEL (HFP)] Connects/disconnects cell-phone
to use for Hands Free.
[Audio (A2DP)] Connects/disconnects Audio
player to use for Bluetooth Audio.
[Remove] Deletes registration (pairing).
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
English
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
AV Input Setup
AV Interface Setup
You can set AV input parameters.
You can set audio and visual (AV) interface
parameters.
1
Display the AV-IN Setup screen
1
Display the AV Interface screen
Touch [ ] > [
] > [AV-IN SETUP]. (page
58)
Touch [ ] > [
] > [AV Interface]. (page 58)
2
Set each item
2
Set each item
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. ( "AV-IN")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(
"OFF")
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": Switches to the rear view camera video
display when engaging the shift knob
of car to "Reverse" and then pressing
the [AUD] button for more than 1
second.
[AV-IN Interruption] Sets an image display of
the system that is connected via the AV INPUT
port. ( "OFF")
"OFF": When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"ON": When an image signal is entered via the
AV INPUT port, this image is displayed.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 60).
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[R-CAM Mirror] You can flip the left and right
of the rear view camera video display. Set to
"ON" and the rear view will be displayed left
and right in mirror image on the screen.
[iPod AV Interface Use] Sets the terminal
which iPod is connected. ( "iPod")
(
"OFF")
⁄
•
⁄
When in DVD source, "AV-OUT" cannot be set to USB or
SD. When in USB source, "AV-OUT" cannot be set to DVD
or SD. When in SD source, "AV-OUT" cannot be set to DVD
or USB.
•
This item can be set when in STANDBY source and
also the iPod is unconnected.
[AV-IN1 Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
(
"VIDEO")
70
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[On Screen Navigation] Sets an on-screen
display of the navigation screen. ( "OFF")
(DDX models only)
Navigation Setup
You can set Navigation parameters.
"Auto": Information is displayed for 5 seconds
when updated.
"OFF": Information is not displayed.
1
2
Display the Navigation Setup screen
Touch [ ] > [
] > [Navigation]. (page 58)
Set each item
DSP Bypass Control (DNX/DDX7 models)
Temporarily bypassing DSP (Digital Signal
Processor) System.
1
2
Display the Audio SETUP screen
Touch [ ] > [
] > [Audio SETUP]. (page
58)
Set the DSP Select
[NAV Interrupt Speaker] Selects speakers
used for voice guidance of the navigation
system.
(
"Front All")
"Front L": Uses the front left side speaker for
voice guidance.
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
[Bypass] There is no effect by DSP.
[Through] There is an effect by DSP.
⁄
•
When the mode is set to [Bypass], DSP System cannot
be adjusted.
[NAV Voice Volume] Adjusts the volume for
voice guidance of the navigation system.
(
DNX models: "25", DDX models: "21")
[Line Mute] Mutes the volume during voice
guidance of the navigation system.
(
"ON")
When turned "ON", the volume level drops for
voice guidance.
[Navigation Input] Selects a navigation
system connection. ( "RGB") (DDX models
only)
"RGB": Allows the Kenwood’s Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation system
to connect via the AV INPUT1 port.
"OFF": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
English
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
3
Select a speaker type
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
1
2
Display the Speaker Select screen
Touch [ ] > [ ] > [Audio SETUP] >
[Speaker Select]. (page 58)
Select a speaker you wish to adjust
You can select any of the following speaker
types.
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
DNX/ DDX7 models
"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18
cm, 4x6, 5x7, 6x8, 6x9, 7x10
DNX/ DDX7 models
"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17
cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
1
"Subwoofer" NONE, 16 cm, 20 cm, 25 cm, 30
cm, 38 cm over
2
3
DDX6 models
Standard, Narrow, Middle, Wide
⁄
DDX6 models
•
Select "NONE" if you have no speakers.
Crossover Network Setup
1
You can set a crossover frequency of speakers.
2
3
1
Select the speaker to set the crossover
1
1
2
3
Front speaker
Rear speaker
Subwoofer
2
3
[Subwoofer] Sets the availability of
subwoofers. (DDX6 models only)
1
2
3
Sets the High Pass Filter of the front speaker.
Sets the High Pass Filter of the rear speaker.
Sets the Low Pass Filter of the sub woofer.
[Tweeter] You can set the tweeter when you
are selecting front speakers. (DNX/DDX7
models only)
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
2
3
Display the Crossover setup screen
Set the crossover
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
72
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Speaker Location setup
1
Display the Speaker Location Setup screen
Sets the sub woofer phase. (Only when
"Subwoofer" is set to "ON" in Audio Setup)
(DDX6 models: Only when "Subwoofer" is set
to "ON" in Audio Setup and "LPF FREQ" is set
to other than "Through")
2
Set the speaker locations
[HPF FREQ] High Pass Filter adjustment.
(When front speaker or rear speaker is selected
on Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (When
Subwoofer is selected on Speaker Select
screen)
[Slope] Sets a crossover slope. (DNX/DDX7
models only)
[Front Speaker] Sets the location of the front
speaker.
"Door", "On Dash", "Under Dash"
[Rear Speaker] Sets the location of the rear
speaker.
Car Type (DTA) Setup (DNX/DDX7 models)
You can setup the car type and speaker network,
etc.
"Door", "Rear Deck"
"2nd Row", "3rd Row" (Minivan, Minivan (Long))
1
2
Display the Car Type Setup screen
Car Type Adjust
You can manually set the sound output timing of
each channel.
Touch [ ] > [
] > [Audio SETUP] > [Car
Type]. (page 58)
Setup the Car Type
1
2
Display the Car Type Adjust screen
If your car type is selected, the Digital Time
Alignment and Equalizer is set automatically (for
timing adjustment of sound output for each
channel) to have the highest surround effects.
Select a speaker you wish to adjust
1
1
2
3
1
Sets up the car type you use together with
this unit.
1
2
3
Front speaker
Rear speaker
Subwoofer
You can choose according to type of your car.
"OFF", "Compact", "Full Size Car", "Wagon",
"Minivan", "SUV", "Minivan (Long)"
[Location] Sets the locations of the speakers.
[Adjust] Displays the Car Type Adjust screen.
You can adjust the digital time alignment that
was set automatically when you selected the
car type.
Next page 3
English
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
3
Set a delay time
DVD Setup
You can set up the DVD play.
1
2
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 58)
Set each item
Make fine adjustment of the delay time of the
speaker output specified at <Setup the Car
Type> to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
[Menu Language] Selects a disc menu
language.*1
(See <DVD Language Setup>, page 75)
+100cm
50cm
[Subtitle Language] Selects a subtitle
language.*1
(See <DVD Language Setup>, page 75)
[Audio Language] Selects an audio
80cm
language.*1
(See <DVD Language Setup>, page 75)
150cm
+70cm
[Dynamic Range Control] Sets the dynamic
range.*1 ( "Dialog")
+0cm
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
(
"ON")
74
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
[Original] Sets the DVD's original language
(only when setting an audio language).
[Screen Ratio] Selects the screen display
mode.*1 ( "16:9")
"16:9": Displays wide pictures.
[Clear] Clears the language code.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at the
top and bottom of screen).
4
Set the language you use
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
[Parental Level] Displays the Parental Lock
DVD Parental Level Setup
screen.*1 ( "OFF")
(See <DVD Parental Level Setup>, page 75)
Sets a parental level.
[Disc SETUP] Makes the settings related to the
disc media. (See <Disc Setup>, page 76)
[Output] Keep "Auto" to use.*1
1
2
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 58)
Display the Parental Level code number
screen
⁄
•
* Disabled when a DVD is being played.
DVD Language Setup
Selects a language you use for the speech and
menus.
1
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 58)
3
Enter the code number
2
Select the language item to set
1
3
Enter a language code
See <DVD Language Codes> (page 87) and
select the desired language.
1
Enters a code number.
[Cancel] Cancels the current setup and returns
to the "DVD SETUP" screen.
1
[Level] Indicates the present parental lock
level.
[Enter] Determines the code number and
displays the Parental Level setup screen.
[Clear] Clears the code number.
⁄
1
Enters a language code.
•
The number you enter first is set as your code
number.
[Cancel] Cancels the language setup and
returns to the "DVD SETUP" screen.
[Enter] Sets the language and returns to the
"DVD SETUP" screen. (It appears after you have
entered a language code.)
Next page 3
English
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
4
Display the Parental Level SETUP screen
Disc Setup
Performs setup when using disc media.
1
2
Display the DVD Setup screen
Touch [ ] > [
] > [DVD SETUP]. (page 58)
5
Select a parental level and complete the
setup
Display the Disc Setup screen
Selects a parental level.
3
Set each item
⁄
•
•
•
If a disc has higher parental lock level, you need to enter
the code number.
The parental lock level varies depending on a loaded
disc.
If a disc has no parental lock, anybody can play it back
even when you have set the parental lock.
[Picture Display Time] Selects a picture
display time. ( "Long")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[CD Read] Sets a music CD playback. ( "1")
"1": Automatically recognizes and plays back
an Audio file disc, a DVD or a music CD.
"2": Forcibly plays back a disc as a music CD.
Select "2" if you wish to play a music CD
having a special format or if you cannot
play a disc in the "1" position.
⁄
•
•
Disabled when a DVD is being played.
You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in
the "2" position.
[On Screen DVD] Sets an on-screen display of
the DVD Playback screen. ( "Manual")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
76
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
USB/ SD Setup
iPod Setup
Performs setup when using USB or SD.
Performs setup when using iPod.
1
Display the USB/ SD Setup screen
1
2
Display the iPod Setup screen
Touch [ ] > [
] > [USB SETUP] or [SD
Touch [ ] > [
] > [iPod SETUP]. (page 58)
SETUP]. (page 58)
Set each item
2
Set each item
Example : USB Setup screen
[AudioBook Speed] Sets the Audio book
playback speed. ( "Normal")
[Picture Display Time] Selects a picture
display time. ( "Long")
[Wide Screen] Sets Wide Screen on or off.
(
"OFF")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[On Screen iPod] Sets an on-screen display of
the iPod Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[On Screen USB]/ [On Screen SD] Sets an
on-screen display of the USB/ SD Playback
screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
⁄
"Manual": Information is displayed when you
touch on the screen.
•
"Wide Screen" cannot be set while the iPod is connected.
English
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Tuner Setup (Reagion 2/ 3 models)
TV Setup
You can set Tuner related parameters.
The TV signal receiving areas can be set.
1
2
Displaying TV SETUP screen
1
2
Display the Tuner Setup screen
Touch [ ] > [
] > [TV SETUP]. (page 58)
Touch [ ] > [
] > [TUNER SETUP]. (page
58)
Set each item
Set each item
[On Screen TV] Sets an on-screen display of
the TV screen.
(
"Auto") (with the optional accessory TV
tuner connected only)
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[NEWS] Sets a news bulletin interrupt time.
(
"OFF")
3
Setting up TV
[AF] When station reception is poor,
automatically switches to the station that
is broadcasting the same program over the
same RDS network. ( "ON")
Example : TV1 Area screen
[Regional] Sets whether to switch to the
station only in the specific region using the
“AF” control. ( "ON")
[Auto TP Seek] When traffic information
station reception is poor, automatically
searches for a station that can be received
better. ( "ON")
Sets the present TV1 or TV2 receiving area.
[Language Select] Selects a display language
for the PTY function.
[Antenna Control SETUP] Allows you to turn
off the RDS function to prevent the motor-
driven antenna from extending. ( "ON")
78
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
This unit can be operated using the Remote Controller supplied with this unit.
¤
•
Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
Do not place the battery near an open flame or heat source. This may cause the battery to explode.
Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.
•
•
•
2CAUTION
•
Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.
Battery installation
Remote Controller mode switch
Use two "AAA"/"R03"-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
The functions operated from the remote
controller differ depending on the position of the
mode switch.
[RC-DV330]
[RC-DV340]
DISP
DISP
SRC
V.SEL
SRC
V.SEL
AUD
DVD
TV
ZOOM
OUT
ꢆ
ꢁꢃ
MODE FNC/PBC
MENU
IN
POSITION
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
U
U
U
U
O
AUD
SUBTITLE
U
U
U
U
DVD
TV
ENTER
ꢁꢃ
ꢆ
NAVI
O
O
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
AUD
U
U
U
NAVI
DVD
TV
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
ENTER
SUBTITLE
ANGLE
ZOOM
MAP DIR
O
O
O
O
+
FM
OPEN
ꢀ
FM+
D
VOL
VOL
AUD
DVD
TV
U
O
ꢀ
ꢄ
D
Y
AM−
O
O
ꢄ
Y
2ZONE
U
U
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
1
ꢅ
1
ꢅ
ꢀ
R.VOL
ꢁ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
4GHI 5JKL 6MNO
7
CLEAR
PQRS 8TUV 9WXYZ
7PQRS 8TUV 9WXYZ
DIRECT
1
+
#
BS
ATT
CLEAR
DIRECT
ATT
0
0
⁄
•
If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.
AUD mode
Switch to this mode when controlling a selected
source or tuner source, etc.
DVD mode
Switch to this mode when playing DVDs or CDs etc.
with the player integrated in this unit.
TV mode
This is switched when controlling TV.
NAVI mode
This is switched when controlling Navigation unit.
⁄
•
The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
When controlling a player that is not integrated in the
unit, select "AUD" mode.
•
English
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
Display angle
Switches the display angle each time it is pressed.
Common operations (AUD mode)
O
NAVI
[RC-DV330]
[RC-DV340]
O
AUD
DVD
TV
•
•
•
AUDIO RETURN
CANCEL
MODE/TOP MENU FNC/MENU/PBC
ENTER
ROUTEM
AV OUT
VIEW
VOICE
OPEN
Source switching
Switches to the source to be played.
SUBTITLE
O
O
MAP DIR
ANGLE
O
AM−
OPEN
FM
+
O
FM
VOL
ꢀ
VOL
DISP
DISP
SRC
V.SEL
SRC
V.SEL
ZOOM
OUT
ꢆ
ꢁꢃ
MDE FNC/PBC
Cursor key
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
ME
IN
POSITION
O
AUD
AUDIO
SUBTITLE
Moves the cursor when displaying menu.
•
•
DVD
ENTER
ZOOM
OUT
ꢁꢃ
ꢆ
ꢆ
ꢁꢃ
ꢁꢃ
ꢆ
MENU
IN
POSITION
O
O
AUD
DVD
TV
•
AUD
•
•
•
•
•
•
Volume control
EN
DVD
TV
ENR
O
Adjusts the volume.
O
AUDIO RE
VIEW
MAP DIR
MODE/TOP MENU FNC/MENU/PBC
AM−
FM
+
O
O
ANGLE
ZOOM
O
O
+
FM
ꢀ
D
AM−
OPEN
FM
+
VOL
VOL
O
ꢀ
ꢄ
D
Y
−
O
AM
O
ENTER
Enters options.
ꢄ
Y
2Z
2Z
1
2ABC 3DEF
1
2ABC 3DEF
ꢆ
ꢁꢃ
POSITION
ꢁꢃ
ꢆ
MENU
OUT
IN
O
O
AUD
AUD
DVD
TV
•
Volume attenuator
Press the key once to lower the volume. Press again
•
•
•
•
•
•
DVD
TV
ENTER
ENTER
NAVI
O
O
O RETURN
MODE/TOP MENU FNC/MENU/PBC
to restore the previous volume.
AM−
OPEN
FM
+
R.VOL
R.VOL
7
PQRS 8TUV 9WXYZ
ꢁ
7PQRS 8TUV 9WXYZ
ꢁ
CLEAR
DIRECT
Hands-free communication
BS
1
+
#
ATT
0
CLEAR
DIRECT
ATT
0
When a call comes in, it answers the call.
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
O
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
AM−
OPEN
FM
+
SUBTITLE
VOL
MAP DIR
ꢀ
ꢄ
D
Y
O
2ZONE
ꢀ
ANGLE
ZOOM
O
Dual Zone
O
+
FM
ꢀ
D
1
2ABC 3
1
ꢅ
Switches the Dual Zone function ON and OFF.
O
−
OPEN
ꢀ
FM+
D
VOL
VOL
ZOOM
ꢀ
ꢄ
D
Y
O
O
−
O
AM
Function
Switches the function screen.
ꢄ
Y
2ZONE
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
1
ꢅ
1
ꢅ
ꢀ
•
ꢀ
4GHI 5JKL 6MNO
ENTER
4GHI 5JKL 6MNO
•
TV
R.
DISP
•
R.VOL
NAVI
SRC
V.SEL
O
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
MODE FNC/PBC
ROUTEM
AV OUT
VIEW
VOICE
OPE
CANCEL
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
Rear volume control
SUBTITLE
SU
MAP
Adjusts volume at rear when the Dual Zone
NGLE
O
ꢁꢃ
ꢆ
function is ON.
2ZONE
MODE
Switches the screen mode.
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
1
ꢅ
1
ꢅ
ꢀ
R.VOL
ꢁ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
4GHI 5JKL 6MNO
Screen mode changes each time you press this key.
7PQRS 8TUV 9WXYZ
7
PQRS 8TUV 9WXYZ
•
TV
CLEAR
DIRECT
•
CLEAR
DIRECT
AT
0
NAVI
DISP
+
#
BS
A
1
0
O
SRC
V.SEL
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
MODE FNC/PBC
ROUTEM
AV T
VIE
VOICE
OPEN
CANCEL
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
SUBTITLE
V.SEL
AP DIR
UBTITLE
ANGLE
O
O
+
FM
Switches to the navigation screen.
ꢀ
ꢁꢃ
ꢆ
D
DISP
DISP
SRC
V.SEL
SRC
V.SEL
ZOOM
OUT
ꢆ
ꢁ
MODE FNC/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RE
ZOOM
MENU
IN
POSI
O
AUD
AUDIO
SUBTITLE
•
•
•
DVD
ENTER
ꢁꢃ
ꢆ
80
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD 1.X, VCD 2.X (PBC OFF)
DVD/VCD (DVD mode)
Track number
Cancel
[RC-DV330]
[RC-DV340]
Track search and file search
Selects the track or file to be played.
VCD 2.X (PBC ON)
VIEW
MAP DIR
O
O
ANGLE
O
O
+
FM
AM−
OPEN
FM
+
Scene number
Number
ꢀ
D
VOL
VOL
ZOOM
D
Y
O
O
O
AM
Y
2ZONE
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
1
ꢅ
Cancel
Play/Pause
Pauses the track.
Press again to resume playing.
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [ENTER] key.
ENTER
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
DISP
Numeric keypad
SRC
V.SEL
AUDIO
SUBTITLE
ZOOM
OUT
2ZONE
ꢆ
ꢁꢃ
ꢄ
Y
ꢁꢃ
ꢆ
MENU
IN
POSITION
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
O
1
ꢅ
1
ꢅ
O
ꢀ
R.VOL
ꢁ
ꢀ
R.VOL
ꢁ
•
AUD
•
•
•
4GHI 5JKL 6MNO
4GHI 5JKL 6MNO
TV
DVD
TV
ENTER
ENTER
7PQRS 8TUV 9WXYZ
7
PQRS 8TUV 9WXYZ
CLEAR
DIRECT
CLEAR
DIRECT
ATT
0
1
+
#
BS
ATT
0
Stop
Memorizes the last point where the disc stopped.
When pressed again, the last point is deleted.
•
•
Specify the number to search in direct search.
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
DISP
1
2ABC
to fast forward/backward.
Press
SRC
V.SEL
SUBTITLE
ZOOM
OUT
ꢆ
ꢁꢃ
Switches the fast forward/backward speed each
time you press this key.
ꢁꢃ
ꢆ
MENU
IN
POSITION
O
O
AUD
•
•
•
AUD
•
•
•
DVD
TV
DVD
TV
ENTER
ENTER
•
Press
4GHI
5JKL
to slow forward/backward.
Switches the slow playback speed each time you
press this key.
Direct search
R.VOL
R.VOL
7
PQRS 8TUV 9WXYZ
ꢁ
7PQRS 8TUV 9WXYZ
ꢁ
CLEAR
DIRECT
1
+
#
BS
ATT
0
DVD Top Menu
CLEAR
DIRECT
ATT
0
Returns to the DVD top menu.
•
TV
•
DISP
NAVI
O
SRC
MODE FNC/PBC
V.SEL
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
Pressing this key switches the features that can be
searched directly.
ROUTEM
AV T
VOICE
OPEN
CANCEL
TOP MENU
AU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
SUBTITLE
UBTITLE
MAP DIR
ANGLE
O
O
+
FM
ꢁꢃ
ꢆ
DVD-VIDEO
DVD Menu
Displays the DVD menu.
Turns the playback control on or off while playing
Title number
Chapter number
Play time
VCD.
Item number*
Cancel
ENTER
•
TV
DISP
•
NAVI
AUDIO RETURN
CANCEL
O
SRC
V.SEL
MODE/TOP MENU FNC/MENU/PBC
MODE FNC/PBC
ROUTEM
AV OUT
VIEW
VOICE
OPN
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
SUBTITLE
* You may not be able to use this function with some discs
or scenes.
AUDIO
SUB
M
ANGLE
O
+
FM
ꢁꢃ
ꢆ
DVD-VR
SUBTITLE
Switches the subtitle language.
Title number
Chapter number
Play time
NAVI
O
DISP
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
SRC
MODE FNC/PBC
V.SEL
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
SUBTITLE
TOP MENU
AUDIO
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
MAP DIR
AN
ZOOM
O
SUBTITLE
O
+
FM
Cancel
ꢀ
D
VOL
ꢁꢃ
Next page 3
English
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
ZOOM
Direct search
R.VOL
R.VOL
Switches the zoom ratio each time you press this
7
PQRS 8TUV 9WXYZ
ꢁ
7PQRS 8TUV 9WXYZ
ꢁ
CLEAR
DIRECT
key.
1
+
#
BS
ATT
0
CLEAR
DIRECT
ATT
0
VIEW
MAP DIR
DISP
ANGLE
ZOOM
O
O
+
FM
SRC
V.SEL
ꢀ
D
MODE FNC/PBC
VOL
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
O
−
AM
O
Pressing this key switches the features that can be
searched directly.
ꢄ
Y
2ZONE
AUDIO
SUBTITLE
1
2ABC 3
ꢁꢃ
ꢆ
1
Music Disc
Picture Angle
Switches the picture angle each time you press this
Track number
Play time
Cancel
key.
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
DISP
SUBTITLE
ANGLE
ZO
SRC
V.SEL
MAP DIR
MODE FNC/PBC
O
O
+
FM
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
ꢀ
D
VOL
AUDIO
SUBTITLE
Audio files in DVD/CD disc
O
−
O
AM
ꢄ
Y
2ZONE
ꢁꢃ
ꢆ
Folder number
File number
Cancel
AUDIO
Switch Voice Language
Switches the voice language each time you press
this key.
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press
DVD
•
ENTER
•
TV
DISP
•
ꢁꢃ
NAVI
SRC
V.SEL
O
POSITION
[38] key.
MODE FNC/PBC
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
SUB
AUDIO
SUBTITLE
Numeric keypad
MAP DIR
2ZONE
ꢄ
Y
ANGLE
ꢁ
ꢆ
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
1
ꢅ
1
ꢅ
ꢀ
R.VOL
ꢁ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
7
PQRS 8TUV 9WXYZ
CLEAR
DIRECT
CLEAR
DIRECT
ATT
Music Disc/Audio file/Video file/ Picture
file (AUD mode)
0
1
+
#
BS
ATT
0
•
Specify the number to search in direct search.
[RC-DV330]
[RC-DV340]
Folder search
Selects the folder to be played.
O
ANGLE
O
O
O
+
FM
ꢀ
D
AM−
OPEN
FM
+
VOL
ZOOM
VOL
O
−
O
AM
D
Y
O
ꢄ
Y
2ZONE
1
C 3DEF
2ZONE
1
2ABC 3DEF
1
ꢅ
1
ꢅ
Track search and file search
Selects the track or file to be played.
VIEW
MAP DIR
O
O
ANGLE
O
O
+
FM
AM−
OPEN
FM
+
ꢀ
D
VOL
VOL
ZOOM
ꢀ
D
Y
O
O
O
AM
Y
2ZONE
2ZONE
23DEF
1
2ABC 3DEF
ꢅ
Play/Pause
Pauses the track.
Press again to resume playing.
TOP MENU
MENU
DVD SETUP
ANGLE
RETURN
ZOOM
DISP
SRC
V.SEL
AUDIO
SUBTITLE
ZOOM
OUT
ꢆ
ꢁꢃ
ꢁꢃ
ꢆ
MENU
IN
POSITION
O
O
•
AUD
•
•
•
TV
DVD
TV
ENTER
ENTER
82
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio (AUD mode)
NAVI (NAVI mode)
[RC-DV330]
[RC-DV340]
[RC-DV330]
[—]
Band switching
Joystick
Switches to bands received by the unit.
Scrolls the map, or moves the cursor.
ZOOM
OUT
ꢆ
ꢁꢃ
MENU
IN
POSITION
O
O
ANGLE
O
O
O
+
FM
AUD
•
•
•
•
ꢀ
D
DVD
TV
AM−
OPEN
FM
+
VOL
EN
ZOOM
VOL
O
−
O
AM
D
Y
O
O
ꢄ
Y
2ZONE
AUDIO RE
MODE/TOP MENU N/ENU/PBC
1
C 3DEF
2ZONE
1
2ABC 3DEF
1
ꢅ
1
ꢅ
Station selection
ENTER
Switches to broadcast stations received by the unit.
Performs the selected function.
VIEW
MAP DIR
O
ꢆ
ꢁꢃ
O
ANGLE
O
MENU
OUT
IN
POSITION
O
+
FM
AM−
OPEN
FM
+
O
ꢀ
D
VOL
AUD
VOL
•
•
•
•
ZOOM
DVD
TV
ꢀ
D
Y
O
ENTER
O
O
AM
Y
2ZONE
NAVI
2ZONE
2DEF
O
1
2ABC 3DEF
ꢅ
RETURN
MODE/TOP MENU FNC/MENU/PBC
Seek mode switching
Switches the Seek mode (AUTO1, AUTO2, MANU).
ZOOM
Zooms in or out the navigation map.
TOP MENU
MENU
DVD SETUP
RETURN
DISP
DISP
SRC
V.SEL
AUDIO
SUBTITLE
ANGLE
ZOOM
SRC
V.SEL
ZOOM
OUT
ꢆ
ꢁꢃ
ZOOM
OUT
ꢆ
ꢁꢃ
ꢁꢃ
ꢆ
MENU
IN
POSITION
MENU
IN
POSITION
O
O
O
•
AUD
AUD
•
•
•
TV
•
•
•
DVD
TV
DVD
ENTER
ENTER
ER
Direct tuning
After pressing this key, use the keypad to specify
the broadcast station you wish to receive.
MENU
Displays Main menu.
DISP
R.VOL
SRC
V.SEL
R.VOL
7
PQRS 8TUV 9WXYZ
ꢁ
ZOOM
OUT
ꢆ
ꢁꢃ
7PQRS 8TUV 9WXYZ
ꢁ
CLEAR
DIRECT
MENU
IN
POSITION
1
+
#
BS
ATT
O
0
CLEAR
DIRECT
ATT
0
AUD
•
•
•
DVD
ENTER
CANCEL
Displays previous screen.
Example: 92.1MHz (FM)
9WXYZ
2ABC
1
0
0
•
ENTER
•
TV
•
Example: 810kHz (AM)
NAVI
O
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
8TUV
1
0
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
SUBTITLE
MAP DIR
Numeric keypad
ANGLE
O
2ZONE
ꢄ
Y
2ZONE
1
2ABC 3DEF
1
2ABC 3DEF
1
ꢅ
1
ꢅ
POSITION
Displays the current position.
ꢀ
R.VOL
ꢁ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
7
PQRS 8TUV 9WXYZ
CLEAR
DIRECT
DISP
CLEAR
DIRECT
ATT
0
1
+
#
BS
ATT
0
SRC
V.SEL
ZOOM
OUT
ꢆ
ꢁꢃ
MENU
IN
POSITION
O
•
•
•
To use preset tuning, press the number of a
ENTER
1
programmed broadcast station. (
–
6MNO
)
Press the direct tuning key first, then specify the
frequency of the station to receive.
Next page 3
English
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
ROUTE M
Displays Route Option menu.
TV (TV mode)
•
ENTER
[RC-DV330]
[RC-DV340]
•
TV
•
NAVI
O
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
Switching Band/Video
It switches between the station of the TV band to
ROUTEM
AV UT
VIE
VOICE
OPEN
CANCEL
SUBTITLE
MAP DIR
ANGLE
O
receive and video input.
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
O
O
SUBTITLE
ANGLE
ZOOM
VIEW
Switches between 2D and 3D map displays.
MAP DIR
AM−
OPEN
FM
+
VOL
O
O
+
FM
ꢀ
ꢄ
D
Y
ꢀ
D
O
VOL
O
AUDIO RETURN
2ZONE
MODE/TOP MENU FNC/MENU/PBC
1
2ABC 3DEF
O
1
ꢅ
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
ꢄ
Y
2ZONE
SUBTITLE
MAP DIR
ANGLE
ZOOM
O
O
+
Channel Selection
FM
ꢀ
D
VOL
The TV channel to receive is selected.
O
VIEW
MAP DIR
O
ANGLE
O
VOICE
O
+
FM
AM−
OPEN
FM
+
ꢀ
D
VOL
VOL
ZOOM
Plays Voice guidance.
ꢀ
D
Y
O
O
−
AM
O
•
ENTER
•
Y
2ZONE
TV
2ZONE
23DEF
•
NAVI
1
2ABC 3DEF
1
ꢅ
O
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
ROUTEM
AV OUT
VIEW
VOICE
OP
CANCEL
SUBTITLE
Numeric keypad
M
2ZONE
ANGLE
O
ꢄ
Y
1
2ABC 3DEF
2ZONE
1
2ABC 3DEF
1
ꢅ
1
ꢅ
ꢀ
R.VOL
ꢁ
4GHI 5JKL 6MNO
ꢀ
R.VOL
ꢁ
MAP DIR
4GHI 5JKL 6MNO
7
PQRS 8TUV 9WXYZ
7PQRS 8TUV 9WXYZ
Switches between the heading up navigation and
north up navigation map displays.
CLEAR
DIRECT
+
#
BS
ATT
1
0
CLEAR
DIRECT
ATT
0
O
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
ROUTEM
AV OUT
VIEW
VOICE
OPEN
CANCEL
SUBTITLE
•
•
The number of the memorized station is
MAP DIR
ANGLE
ZOOM
O
O
FM
1
selected. (
–
6MNO
)
ꢀ
VOL
Press the direct tuning key first, then specify the
channel of the station to receive.
84
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
3
End initial setup
Initial Setup
1
2
Turns the power On
Set each item
⁄
•
The settings above can be changed in <Setup Menu>
(page 58).
[Language] Select the language used for the
control screen and setting items. (page 60)
[Angle] You can adjust the position of the
monitor. (page 63)
[iPod AV Interface Use] Sets the terminal
which iPod is connected. ( "iPod")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display. ( "OFF")
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": Switches to the rear view camera video
display when engaging the shift knob
of car to "Reverse" and then pressing
the [AUD] button for more than 1
second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 60).
[Color] Sets the screen and button illumination
color. (page 66)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 63) (DNX/
DDX7 models only)
English
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Status bar Indicator items
Source Display Overview
USB/ SD "FO-REP" Indicates that the Folder repeat function is ON.
"MOVIE" Identifies the video file.
Shown below is a list of indicators displayed on
the Status bar.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"REP"
Identifies that the Repeat function is ON.
"PLST" Indicates that the Play list mode is selected now.
"SLIDE" Indicates that the slide show function is ON.
"MUSIC" Identifies the music file.
iPod
"VIDEO" Identifies the video file.
"RDM" Indicates that the Random function is ON.
"A-RDM" Indicates that the Album random function is ON.
Source Display Overview
General "ATT"
Indicates that the attenuator is active.
"REP"
"AF"
Indicates that the Repeat function is ON.
Indicates that the AF search function is ON.
"DUAL" Turns on the Dual zone function.
"LOUD" Indicates that the Loudness control function is ON.
Tuner
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"CRSC" Indicates that the CRSC function is OFF.
"EON" Indicates that the RDS station is sending EON.
"LO.S" Indicates that the Local seek function is ON.
"MANU" Indicates that Seek mode is set to Manual.
"MONO" Indicates that the forced monaural function is ON.
"NEWS" Indicates that news bulletin interruption is in progress.
"TEL"
Indicates the connection state of the Bluetooth hands-free
unit. (Orange: Connected. White: Not connected.)
DVD/CD "FO-REP" Indicates that the Folder repeat function is ON.
"IN"
Indicates that a disc is inserted. (White: A Disc is inside the
unit. Orange: Error at the disc player.)
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"PS"
Indicates that the list display format is PS.
"RDS" Indicates the state of the RDS station when the AF
function is ON. (Orange: RDS is being received. White: RDS
is not being received.)
"REP"
Indicates that the Repeat function is ON.
"SLIDE" Indicates that the slide show function is ON.
DVD-Video "C-REP" Indicates that the Chapter repeat function is ON.
"T-REP" Indicates that the Title repeat function is ON.
DVD-VR "1 M/S" Identifies the primary/secondary audio output of stream 1.
"1 MAIN" Identifies the primary audio output of stream 1.
"1 SUB" Identifies the secondary audio output of stream 1.
"PLST" Identifies the Play list mode.
"SNPS" Indicates that the list display format is SNPS.
"ST"
"TI"
Indicates that stereo broadcast is being received.
Indicates the reception state of traffic information.
(Orange: TP is being received. White: TP is not being
received.)
TV
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"MANU" Indicates that Seek mode is set to Manual.
"T-REP" Indicates that the Title repeat function is ON.
VCD
"1chLL" Identifies the left audio output of channel 1.
"1chLR" Identifies the monaural audio output of channel 1.
"1chRR" Identifies the right audio output of channel 1.
"1chST" Identifies the stereo audio output of channel 1.
"LL"
Identifies the left audio output.
"LR"
"RR"
"ST"
"PBC"
Identifies the monaural audio output.
Identifies the right audio output.
Identifies the stereo audio output.
Indicates that the PBC function is ON.
"SVCD" Identifies the Super Video CD.
"VER1" Indicates that the Video CD version is 1.
"VER2" Indicates that the Video CD version is 2.
"REP"
Indicates that the Repeat function is ON.
86
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Language Codes
Code
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Code
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Language
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Code
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
Language
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
lb
ln
lo
lt
te
Telugu
Tajik
Thai
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
lv
Welsh
Danish
German
Bhutani
Greek
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Twi
Ukrainian
Urdu
eu
fa
fi
fj
fo
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
fr
fy
Yoruba
Chinese
Zulu
ga
gd
gli
gn
gu
ha
he
hi
Polish
ps
pt
qu
rm
rn
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Hebrew
Hindi
ro
ru
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
hr
hu
hy
ia
ie
ik
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
rw
sa
sd
sg
sh
Serbo-Croatian
id
English
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Troubleshooting
Some functions of this unit may be disabled by
some settings made on this unit.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
!
• Cannot set up the subwoofer.
• Cannot set up subwoofer phase.
• No output from the subwoofer.
• Cannot set up the low pass filter.
• Cannot set up the high pass filter.
General
?
The Touch Sensor Tone doesn’t sound.
✔
The preout jack is being used.
Subwoofer is not set to On.
☞ <Speaker Setup> (page 72)
☞
The Touch Sensor Tone can’t be output from
the preout jack.
The DSP Select is Bypass.
☞ <DSP Bypass Control> (page 71)
Tuner source
The Dual zone function is enabled.
?
Radio reception is poor.
☞ <Zone Control> (page 55)
✔
The car antenna is not extended.
The unit is set to STANDBY source.
☞
Pull the antenna out all the way.
!
!
• Cannot select the output destination of the
subsource in the Dual zone.
• Cannot adjust the volume of the rear
speakers.
The Dual zone function is disabled.
☞ <Zone Control> (page 55)
✔
The antenna control wire is not connected.
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
☞
Disc source
?
The specified disc does not play, but another
one plays instead.
Cannot play audio files.
"CD Read" of <Disc Setup> (page 76) is set to
"2".
✔
The specified CD is quite dirty.
Clean the CD.
☞
✔
The disc is severely scratched.
Try another disc instead.
!
!
!
Cannot Folder select.
The Random play function is enabled.
☞
Audio file source
Cannot perform Repeat play.
The PBC function is enabled.
?
The sound skips when an Audio file is being
played.
• Cannot set up the equalizer.
• Cannot set up the crossover network.
The Dual zone function is enabled.
☞ <Zone Control> (page 55)
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD
cleaning of the section on <Handling discs>
(page 6).
The DSP Select is Bypass.
☞ <DSP Bypass Control> (page 71)
✔
The recording condition is bad.
Record the media again or use another
media.
☞
The equalizer is set to "iPod". ☞ <Equalizer
Control> (page 54)
The unit is set to STANDBY source.
88
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
Help?
Error
"Disconnected" (iPod, Bluetooth audio player):
When the unit fails to operate correctly, the
cause of the failure appears on the display.
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
➡ Change the source to any source other than
iPod/Bluetooth. Connect an iPod/Bluetooth
audio player, and change the source to iPod/
Bluetooth again.
"Protect" :
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
➡ Wire or insulate the speaker cord as appropriate
and then push the Reset button.
"No Media File" :
The connected USB device contains no playable audio
file.
"Hot Error" :
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you
may not be able to operate the unit. At such times this
message will appear.
Media was played that doesn’t have data recorded that
the unit can play.
"USB Device Error!!" :
The connected USB device is rated a current capacity
higher than the allowable limit.
➡ Check the USB device.
➡ Use the unit again after reducing the
temperature inside the vehicle.
"Mecha Error" :
Some trouble may have occurred to the connected
USB device.
The disc player is malfunctioning.
➡ Change the source to any source other than USB.
Remove the USB device.
➡ Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
"Not supported USB1.1 device.":
"Disc Error" :
Disc is quite dirty.
➡ Clean the disc, referring tot he section on
<Handling discs> (page 6).
Disc is upside down.
➡ Load the disc with the labeled side up.
An unplayable disc is inserted.
The connected USB device is compliant with USB
1.1 standard. This unit only supports the USB device
compliant with USB 2.0 standard.
➡ Use a USB device which this unit supports.
"Authorization Error" :
Connection to the iPod has failed.
➡ Remove the iPod and then reconnect it.
The unit does not support the iPod.
➡ Refer to <iPod/iPhone that can be connected to
this unit> (page 8).
"Region Code Error" :
The disc you wanted to play has a region code that
cannot be played with this unit.
"Update your iPod" :
"Parental Level Error" :
The iPod's software is an older version which the unit
can not support.
The disc you wanted to play has a higher level than the
parental level you set.
➡ Confirm that the software for the iPod is the
latest version. Refer to <iPod/iPhone that can be
connected to this unit> (page 8).
"No Device" (USB device):
The USB device is selected as a source although no USB
device is connected.
➡ Change the source to any source other than USB.
Connect an USB device, and change the source
to USB again.
"Navigation Error. Please turn on power again
later." :
The communication error has occurred due to severely
cold temperature.
➡ Turn on power again after warming your car
interior.
English
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Monitor section
USB interface section
Picture Size
USB Standard
: 6.95 inches (diagonal) wide
: USB 2.0 High speed
: 156.2 mm (W) x 82.4 mm (H)
File System
Display System
: FAT 16/ 32
: Transparent TN LCD panel
Maximum Power Supply Current
Drive System
: 500 mA
: TFT active matrix system
D/A Converter
Number of Pixels
: 24 Bit
: 336,960 (480H x 234V x RGB)
Video Decoder
Effective Pixels
: MPEG1/ MPEG2/ DivX
: 99.99 %
Audio Decoder
Pixel Arrangement
: MP3/ WMA/ AAC/ WAV (Linear PCM)
: RGB striped arrangement
Back Lighting
: Cold Cathode Fluorescent Tube
SD card section (DDX7 models only)
File System
: FAT 16/ 32
DVD player section
Capacity
D/A Converter
: ≤ 32 G Byte
: 24 bit
Video Decoder
Audio Decoder
: MPEG1/ MPEG2/ DivX
: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/
AAC/ WAV
Audio Decoder
: MP3/ WMA/ AAC/ WAV (Linear PCM)
Video Decoder
: MPEG1/ MPEG2/ DivX
Bluetooth section (DNX/ DDX7 models
only)
Wow & Flutter
: Below Measurable Limit
Technology
: Bluetooth Ver.1.2 Certified
Frequency Response
Sampling frequency; 96 kHz : 20 – 20,000 Hz
Sampling frequency; 48 kHz : 20 – 20,000 Hz
Sampling frequency; 44.1 kHz : 20 – 20,000 Hz
Frequency
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE), Power Class2
Total Harmonic Distortion
: 0.008 % (1 kHz)
Maximum Communication range
: Line of sight approx. 10m (32.8 ft)
S/N Ratio (dB)
: 98 dB (DVD-Video 96 kHz)
Profile
Dynamic Range
HFP (Hands Free Profile), SPP (Serial Port Profile),
HSP (Headset Profile), A2DP (Advanced Audio
Distribution Profile), AVRCP (Audio/Video
Remote Control Profile), OPP (Object Push
Profile), PBAP (Phonebook Access Profile), SYNC
(Synchronization Profile)
: 98 dB (DVD-Video 96 kHz)
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Sampling Frequency
: 44.1/ 48/ 96 kHz
Quantifying Bit Number
: 16/ 20/ 24 bit
90
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
FM tuner section
Audio section
Frequency Range
Maximum Power (Front & Rear)
200 kHz: 87.9 MHz – 107.9 MHz (Region 4/ 6
: 50 W x 4
models only)
50 kHz: 87.5 MHz – 108.0 MHz
Full Bandwidth Power (Front & Rear)
(4 Ω, 14.4 V, 1 % THD)
: 22 W x 4
Usable Sensitivity (S/N : 30 dB)
: 9.3 dBf (0.8 μV/ 75 Ω)
Preout Level (V)
Quieting Sensitivity (S/N : 50 dB)
: 2 V/ 10 kΩ
: 15.2 dBf (1.6 μV/ 75 Ω)
Preout Impedance
Frequency Response ( 3.0 dB)
: ≤ 600 Ω
: 30 Hz – 15 kHz
Speaker Impedance
S/N Ratio (dB)
: 4 – 8 Ω
: 70 dB (MONO)
Tone action (DDX6 models only)
Bass : 100 Hz 10 dB
Selectivity ( 400 kHz)
: ≥ 80 dB
Middle : 1 kHz 10 dB
Treble : 10 kHz 10 dB
Stereo Separation
: 35 dB (1 kHz)
DSP Section (DNX/ DDX7 models only)
AM tuner section
Graphics equalizer
Band: 5 Band
Frequency Range
Frequency (BAND1 – 5): 62.5/ 250/ 1k/ 4k/ 16k Hz
AM (10 kHz): 530 kHz – 1700 kHz (Region 4/ 6
models only)
Gain
LW (9 kHz): 153 kHz – 281 kHz
MW (9 kHz): 531 kHz – 1611 kHz
: -9/ -8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0/ 1/ 2/ 3/ 4/ 5/
6/ 7/ 8/ 9 dB
Usable Sensitivity
AM: 28 dBμ
LW: 45 μV
X'over
High pass filter
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/
100/ 120/ 150/ 180/ 220/ 250 Hz
Slope: -6/ -12/ -18/ -24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/ -12/ -18/ -24 dB/Oct.
MW: 25 μV
Video section
Color System of External Video Input
: NTSC, PAL
External Video Input Level (mini jack)
: 1 Vp-p/ 75 Ω
Time alignment
: 0 – 440 cm (2 cm Step)
External Audio Max Input Level (mini jack)
: 2 V/ 25 kΩ
Position
: 0 – 170 cm (2 cm Step)
Video Output Level (RCA jacks)
: 1 Vp-p/ 75 Ω
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kΩ
Analog RGB input (DDX models only)
: 0.7 Vp-p/ 75 Ω
English
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Navigation section (DNX models only)
Receiver
: High-sensitivity GPS receiver
Reception Frequency
: 1575.42 MHz (C/A code)
Acquisition Times
Cold : < 38 seconds
Factory Reset : < 45 seconds
(On average for a stationary receiver with a clear
view of the sky)
Accuracy
Position : < 10 meters typical
Velocity : 0.05 m/sec. RMS
Position Method
: GPS
Antenna
: External GPS antenna
External SW
Maximum Power Supply Current
: 500 mA
General
Operating voltage
: 14.4 V (10.5 – 16 V allowable)
Maximum Current Consumption
: 15 A
Installation Dimensions (W × H × D)
: 182 × 112 × 163 mm
7-3/16 x 4-7/16 x 6-7/16 inch
Operational Temperature Range
: -10 °C – +60 °C
Storage Temperature Range
: -20 °C – +85 °C
Weight
DNX models : 2.5 kg
DDX models : 2.45 kg
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is
given as 99.99% or more, 0.01% of pixels may not light or
may light incorrectly.
92
DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Download from Www.Somanuals.com. All Manuals Search And Download.
The marking of products using lasers (Except for some areas)
The label is attached to the chassis/case and says that the component
uses laser beams that have been classified as Class 1. It means that the
unit is utilizing laser beams that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
CLASS 1
LASER PRODUCT
About DivX
DivX is a popular media technology created by DivX, Inc. DivX media Files contain highly compressed video
with high visual quality that maintains a relatively small file size. DivX files can also include advanced media
features like menus, subtitles, and alternate audio tracks. Many DivX media files are available for download
online, and you can create your own using your personal content and easy-to-use tools from DivX.com.
About DivX Certified
DivX Certified products are officially tested by the creators of DivX and guaranteed to play all versions of DivX
video, including DivX 6. Certified products qualify for one of several DivX Profiles that designate the type of
video the product supports, from compact portable video to high-definition video.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation
is under license. Other trademarks and trade names are those of their respective owners.
The "AAC" logo is a trademark of Dolby Laboratories.
Font for this product is designed by Ricoh.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
“Made for iPod”means that an electronic accessory has been designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
“Works with iPhone”means that an electronic accessory has been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
SDHC logo is a trademark.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS 2.0 + Digital Out are registered trademarks and the DTS logos and Symbol
are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
For Turkey
Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin
Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.
This product complies with Directive, Number 26891 regarding "REGULATION ON THE RESTRICTION OF THE USE
OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT".
• Declaration of Conformity with regard to the EMC Directive 2004/108/EC
• Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
English
Turkish
Hereby, Kenwood declares that this unit DNX7340BTM/DDX7034BTM is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Bu vesileyle Kenwood, DNX7340BTM/DDX7034BTM ünitesinin, 1999/5/
EC Direktifinin başlıca gereksinimleri ve diğer ilgili hükümleri ile uyumlu
olduğunu beyan eder.
Download from Www.Somanuals.com. All Manuals Search And Download.
|