Kenwood DVD Player DVF R5060 User Manual

MULTIPLE DVD/VCD/CD PLAYER

DV-605

DVF-R5060

INSTRUCTION MANUAL

B60-5265-08 01 (K/P/E/T/X/Y)

02/02

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit

was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original

carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

Please confirm that the following accessories are present.

Batteries(R6/AA) ...(2)

Audio video cord (Red, White, Yellow) ...(1)

Remote control unit ...(1)

Preparations

Coaxial cable ...(1)

*AC plug adaptor ...(1)

* Use to adapt the plug on the power cord to the

shape of the wall outlet.

(Accessory only for regions where use is nec-

essary.)

For the U.S.A.

CAUTION:

Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

IncompliancewithFederalRegulations, thefollowingarereproductions

of labels on, or inside the product relating to laser product safety.

KENWOOD CORPORATION

2967-3, ISHIKAWA-CHO,

HACHIOJI-SHI,

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS NO. 21 CFR

1040.10, CHAPTER 1, SUBCHAPTER J.

Location: Back Panel

CAUTION-

LASER RADIATION WHEN OPEN.

DO NOT STARE INTO BEAM.

Location: Laser Pick-up Unit Cover inside this product

For the U.S.A.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the

modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change

or modification is made.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful inter-

ference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-

sures:

– – Reorient or relocate the receiving antenna.

– – Increase the separation between the equipment and receiver.

– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– – Consult the dealer or an experienced radio / TV technician for help.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

Caution : Read this page carefully to ensure safe operation.

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Please read all of the safety and operating instructions before

operatingthisappliance.Adheretoallwarningsontheappliance

andintheinstructionmanual.Followallthesafetyandoperating

instructions. These safety and operating instructions should

be retained for future reference.

6. Temperature – The appliance may not function properly if

used at extremely low, or freezing temperatures. The ideal

ambient temperature is above +5°C (41°F).

7. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other

appliances (including amplifiers) that produce heat. Do not

place a flaming object, such as a candle or lantern, on or

near the appliance.

1. Power sources – The appliance should be connected to a

power supply only of the type described in the instruction

manual or as marked on the appliance. If you are not sure

of the type of power supply to your home, consult your

appliance dealer or local power company. For appliances

intended to operate from battery power, or other sources,

refer to the instruction manual.

8. Electric shock – Care should be taken so that objects do

not fall and liquid is not spilled into the enclosure through

openings. If a metal objects, such as a hair pin or a needle,

comes into contact with the inside of this appliance, a

dangerous electric shock may result. For families with

children, never permit children to put anything, especially

metal, inside this appliance.

2. Power-cord protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, pay

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

Never pull or stretch

the cord.

9. Enclosure removal – Never remove the enclosure. If the

internal parts are touched accidentally, a serious electric

shock might occur.

^3.CAUTION – Polarization – This appliance may be

equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to

fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

10.Magnetic fields – Keep the appliance away from sources

of magnetic fields such as TV sets, speaker systems,

radios, motorized toys or magnetized objects.

4. Ventilation – Slotsandopeningsinthecabinetareprovided

for ventilation and to ensure reliable operation of the

appliance and to protect it from overheating, and these

openings must not be blocked or covered. The appliance

should be situated so that its location or position does not

interfere with its proper ventilation.

11.Cleaning – Unplug this appliance from the wall outlet

before cleaning. Do not use volatile solvents such as

alcohol,paintthinner,gasoline,orbenzine,etc.tocleanthe

cabinet. Use a clean dry cloth.

To maintain good ventilation, do not put records or a table-

cloth on the appliance. Place the appliance at least 10 cm

away from the walls.

12.Accessories – Do not place this appliance on an unstable

cart, stand, tripod, bracket, or table. The appliance may fall,

causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand,

tripod,bracket,ortablerecommendedbythemanufacturer,

or sold with the appliance. Any mounting of the appliance

should follow the manufacturer’s instructions, and should

use a mounting accessory recommended by the

manufacturer. An appliance and cart combination should

be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart

combination to overturn.

Do not use the appliance on a bed, sofa, rug or similar

surface that may block the ventilation openings. This

appliance should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided

or the manufacturer’s instructions have been adhered to.

5. Waterandmoisture –The appliance shall not be exposed to

drippingandsplashing-forexample,nearabathtub,washbowl,

kitchen sink, laundry tub, in a wet basement, or near a

swimmingpool,etc.Donotplaceanobjectcontainingliquid,

such as a flower vase, on the appliance.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

13.Lightning– For added protection for this appliance during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the appliance due to lightning and power-line

surges.

18.Power lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

14.Abnormal smell – If an abnormal smell or smoke is

detected, immediately turn the power OFF and unplug the

appliance from the wall outlet. Contact your dealer or

19. AC outlets – Do not connect other audio equipment with

a power consumption larger than that specified to the AC

outlet on the rear panel. Never connect other electrical

appliances, such as an iron or toaster, to it to prevent fire

or electric shock.

nearest service center.

POWER OFF!

Preparations

15.Damage requiring service – The appliance should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the

appliance.

20. Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally by

followingtheinstructionmanual.Adjustonlythosecontrols

that are covered by the instruction manual as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the appliance to its normal operation.

E. The appliance has been dropped, or the enclosure

damaged.

21. Attachment – Do not use attachments not recommended

by the appliance manufacturer as they may cause hazards.

22. Replacementparts–Whenreplacementpartsarerequired,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same

characteristics as the original parts. Unauthorized

substitutions may result in fire, electric shock, or other

hazards.

F. Theapplianceexhibitsamarkedchangeinperformance.

16.Servicing – The user should not attempt to service the

appliance beyond that described in the instruction manual.

All other servicing should be referred to qualified service

personnel.

23. Safety check – Upon completion of any service or repairs

to this appliance, ask the service technician to perform

safety checks to determine that the appliance is in proper

operating condition.

17.Outdoor antenna grounding– If an outside antenna is

connected to the appliance, be sure the antenna system is

grounded so as to provide some protection against voltage

surges and built up static charges. Article 810 of the

National Electrical Code

ANSI/NFPA 70, provides

information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors,

locationofantennadischargeunit,connectiontogrounding

electrodes, and requirements for the grounding electrode.

See Figure.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

ANTENNA

LEAD IN WIRE

GROUND

CLAMPS

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

Notes:

GROUND CLAMP

1. Item 3 is not required except for grounded or polarized equipment.

2. Item 17 and 18 are not required except for units provided with

antenna terminals.

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

3. Item 17 complies with UL in the U.S.A.

Download from Www.Somanuals.com. All Manuals Search And Download.

Special features and Contents

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Special features

This document classifies the applications of each feature using the following marks.

: Description of a feature that can be used with DVD.

: Description of a feature that can be used with CD.

: Description of a feature that can be used with VCD.

DVD

VCD

DVD

Higher video quality than S-VHS video and LaserDisc

Higher audio quality than music CD

DVD

CD VCD

DVD

Graphical user interface (GUI) compatibility

Versatile DVD playback features

DVD

DTS digital output compatibility

Caution : Read the pages marked

carefully to ensure safe operation.

Contents

Using Bookmarks .................................................................................. 23

Preparations

Repeat play ............................................................................................. 24

A-B Repeat play ..................................................................................... 24

Random play ........................................................................................... 25

Program play..................................................................................... 26

Set Up functions ............................................................................... 28

Set up menu ............................................................................................ 28

Select Audio Language ........................................................................ 29

Select Subtitle Language .................................................................... 29

Select Menu Language ........................................................................ 30

Select Rating .......................................................................................... 30

Password ................................................................................................ 31

TV aspect ................................................................................................. 33

Dynamic Range ...................................................................................... 34

Digital Audio Out ................................................................................... 34

Linear PCM ............................................................................................. 35

Menu playback................................................................................. 36

Hierarchical structure of VCD menus ............................................... 36

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off) ..... 37

Selecting the Audio channel .............................................................. 37

MP3 function..................................................................................... 38

Guidance of MP3 ................................................................................... 38

Playing back MP3 ................................................................................. 39

Selecting MP3 files .............................................................................. 40

MP3 Repeat play .................................................................................... 41

MP3 Random play .................................................................................. 41

MP3 program playback ........................................................................ 42

DVD menu language code list....................................................... 43

Introduction......................................................................................... 2

Before applying power .................................................................. 2

Safety precautions .......................................................................... 2

IMPORTANT SAFEGUARDS ...................................................... 4

Special features and Contents........................................................ 6

Special features ...................................................................................... 6

Contents ..................................................................................................... 6

Discs information .............................................................................. 7

Types of playable discs ......................................................................... 7

Unplayable discs ..................................................................................... 7

Icons on the DVD VIDEO discs ............................................................. 7

Region Codes ...................................................................................... 8

Region codes in the world .................................................................... 8

Video formats...................................................................................... 9

Important items ................................................................................ 10

Maintenance .......................................................................................... 10

Reference ................................................................................................ 10

System Connections........................................................................ 11

Connecting to a TV with video (composite) input terminal ......... 11

Connecting to a TV with S-video input terminal ............................ 11

Connecting to a TV with SCART input terminal

(For Europe and U.K.) ........................................................................ 11

Connecting to a TV with Component input terminals

(For other countries)......................................................................... 12

Connecting to an Audio component .................................................. 12

Controls and indicators .................................................................. 13

Operation of remote control unit .................................................. 14

Knowledge

In case of difficulty.......................................................................... 44

Specifications .................................................................................. 46

Operations

Playback of disc .............................................................................. 16

Basic play ............................................................................................... 16

Disc playback features ........................................................................ 17

Using the On-screen banner display ........................................... 19

Selecting a Title .................................................................................... 20

Selecting a Chapter or Track.............................................................. 20

Select Audio Language ........................................................................ 21

Select Subtitle Language .................................................................... 21

Select Camera angle ............................................................................ 22

Using IntroScan function ..................................................................... 22

Download from Www.Somanuals.com. All Manuals Search And Download.

Discs information

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Types of playable discs

The system using this unit does not only play music from CD but can also play the discs listed below to offer you

high-quality entertainment of video of movies and live concerts.

Playable Disc

DVD VIDEO

CD (CD-R, CD-RW)

VCD

Logo mark on disc

Preparations

Disc size

8cm

12cm

Played sides

One or both

One side only

Approx. 41 min.

(1 side, 1 layer)

Approx. 75 min.

(1 side, 2 layers)

Approx. 82 min.

(2 sides, 1 layer)

Approx. 150 min.

(2 sides, 2 layers)

Approx. 133 min.

(1 side, 1 layer)

Approx. 242 min.

(1 side, 2 layers)

Approx. 266 min.

(2 sides, 1 layer)

Approx. 484 min.

(2 sides, 2 layers)

Video + Audio

Max. 74 min.

Audio

Max. 20 min., digital Max. 74 min., digital

MP3 media that can be played back with this equipment (CD-R, CD-RW)

Unplayable discs

This player cannot play back any of the following discs.

DVD AUDIO discs

S-VCD discs

DVD-ROM discs

CDV discs (Only the audio part can be reproduced.)

CD-G/CD-EG/CD-EXTRA discs (Only the audio can be

reproduced.)

DVD-R/DVD-RAM/DVD-RW discs

CD-ROM discs (Except MP3 disc [ ISO 9660 level 1])

VSD discs

Photo CD discs (Never attempt to play them.)

÷ A DVD VIDEO disc with a region code which does not match this unit or without a region code. For details, see "Region

Codes".

÷ When the video format of a disc differs from that of the TV in use, the disc cannot be played normally. For details, see "Video

Formats".

÷ This unit may also be incapable of playing certain CD-R/RW discs depending on their properties, recording conditions, etc.

Icons on the DVD VIDEO discs

Icon

Description

Indicates the region code where the disc can be played.

Number of voice languages recorded with the audio function. The number in the icon indicates the number of

voice languages. (Max. 8 languages)

Numberofsubtitlelanguagesrecordedwiththesubtitlefunction. Thenumberintheiconindicatesthenumber

of subtitle languages. (Max. 32 languages)

Numberofanglesprovidedbytheanglefunction.Thenumberintheiconindicatesthenumberofangles.(Max.

9 angles)

Aspect ratios that can be selected. "LB" stands for Letter Box and "PS" for Pan/Scan. •‹

In the example on the left, the 16:9 video can be converted into letter box video.

Download from Www.Somanuals.com. All Manuals Search And Download.

Region Codes

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Every player of this model has a certain region code assigned to it based on the country where the player is used.

When the player is used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region

codes matching the region code of the player.

The region code for this player is described on the rear panel of the player.

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the follow-

ing map.

Professional use disc

(Air Line cabin service)

Region codes of the DVD VIDEO discs that can be played with this player

This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player

shown in the table above, a marking containing the region code of the player or the "ALL" marking shown below.

EvenwhenaDVDVIDEOdiscdoesnotcarryanyindicationoftheregioncode, itmaysometimesunabletobeplayed

on this player due to certain restrictions.

Restrictions due to difference between discs

SomeDVDandVCDdiscscanbeplayedonlyincertainplaybackmodesaccordingtotheinten-

Inhibition icon

tions of the software producers. As this player plays discs according to their intentions, some

functions may not work as intended by you. Please be sure to read the instructions provided

with each disc. When an inhibition icon is displayed on the TV screen connected to the player,

it indicates that the disc being played is under the restriction as described above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video formats

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

TV formats of major countries

The TV picture display and disc signal systems can be

divided roughly into two TV formats (NTSC and PAL).

TV Format

Major Countries & Areas

Japan, Taiwan, Korea, USA, Canada,

Mexico, Philippines, Chile, etc.

NTSC

They are variable depending on countries and areas.

China, U.K., Germany, Australia, New

Zealand, Kuwait, Singapore, etc.

PAL

(For U.S.A. , Canada and U.S. Military )

This unit reproduces NTSC discs in NTSC format. (This unit can not play PAL discs.)

(For other countries)

This unit reproduces NTSC discs in NTSC format and PAL discs in PAL format.

Preparations

÷ If the video formats of the disc and TV do not match, the disc cannot be reproduced correctly. It is therefore required to select the

disc according to the TV set in use (country and area).

Checking the Video Format

Check the video format of the VCD and DVD discs to be played on the player as described below.

1 Check if the video formats of the TV to be used and

When the video formats are different :

disc to be played match each other.

Try playing the disc. If the video formats of the disc and TV

do not match, the played video may be black and white or

become as shown below.

÷ For details, refer to the instructions provided with the

TV and disc.

2 When the TV is switchable between NTSC and PAL,

set the TV format according to the disc format.

Top and bottom edges are not

displayed.

TV Format

NTSC only

Playable Disc Format

NTSC

PAL only

PAL

Top and bottom areas are dark.

NTSC/PAL switchable

NTSC/PAL

÷ Correct video cannot be reproduced if the video formats of the

Picture turbulence due to sync

unmatching.

TV and disc do not match.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important items

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Maintenance

Maintenance of the unit

In regard to contact cleaner

Whenthefrontpanelorcasebecomesdirty,wipewithasoft, Do not use contact cleaners because it could cause a malfunction.

dry cloth. Do not use thinner, benzine, alcohol, etc. for these Be specially careful not to use contact cleaners containing oil, for

agents may cause discoloration.

they may deform the plastic component.

Reference

Disc handling precautions

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player. Therefore,

to avoid danger, never use a cracked or deformed disc or a disc repaired

with tape or adhesive agent. Please do not use discs which are not

round because they may cause malfunction.

Handling

Hold the disc so that you do not touch the

playing surface.

Label side

Playing side

Disc accessories

Sticker

The disc accessories (stabilizer, protection sheet, protection ring, etc.)

which are marketed for improving the sound quality or protecting discs

as well as the disc cleaner should not be used with this system because

they may cause malfunction.

Do not attach paper or tape to either the

playing side or the label side of the disc.

Sticky paste

Cleaning

If there are fingerprint marks or foreign matter

found on the disc, lightly wipe the disc with a

soft cotton cloth (or similar) from the center of

the disc outwards in a radial manner.

Storage

When a disc is not to be played for a long pe-

riod of time, remove it from the player and

store it in its case.

Note related to transportation and movement

Caution on condensation

Condensation(ofdew)mayoccurinsidetheunitwhenthereisagreat

differenceintemperaturebetweenthisunitandtheoutside.Thisunit

maynotfunctionproperlyifcondensationoccurs. Inthiscase, leave

theunitforafewhoursandrestarttheoperationafterthecondensa-

tion has dried up.

Before transporting or moving this unit, carry out the

following operations.

1. Set the POWER ON/OFF switch to the ON

without loading a disc.

2. Wait a few seconds and verify that the display

shown appears.

Bespeciallycautiousagainstcondensationinthefollowingcircum-

stances:

When this unit is carried from one place to another across a large

difference in temperature, when the humidity in the room where

this unit is installed increases, etc.

3. Set the POWER ON/OFF switch to OFF.

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connections

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Make connections as shown below.

When connecting the related system components, re-

fer also to the instruction manuals of the related com-

ponents.

Malfunction of microcomputer

If operation is not possible or erroneous display appears even though

all connections have been made properly, reset the microcomputer

referring to "In case of difficulty". r

Caution:

Do not plug in the power lead until all connections are com-

pleted.

Caution

Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.

Do not place any objects impairing heat radiation onto the top of the unit.

Leave some space around the unit (from the largest outside dimension including projection) equal to or greater than, shown below.

Preparations

Top panel : 50 cm

Side pannel : 10 cm

Back panel : 10 cm

Connecting to a TV with video (composite) input terminal

(For Europe and U.K.)

(For other countries)

COMPONENT

VIDEO OUTPUT

VIDEO

OUTPUT

VIDEO

OUTPUT

AUDIO

OUTPUT

AUDIO

OUTPUT

COAXIAL OPTICAL

S-VIDEO

Audio video cord

Connecting to a TV with S-video input terminal

(For Europe and U.K.)

(For other countries)

COMPONENT

VIDEO OUTPUT

VIDEO

OUTPUT

VIDEO

OUTPUT

AUDIO

OUTPUT

AUDIO

OUTPUT

COAXIAL OPTICAL

S-VIDEO

S-video cord

Audio cord

Connecting to a TV with SCART input terminal(For Europe and U.K.)

VIDEO

OUTPUT

AUDIO

OUTPUT

COAXIAL OPTICAL

S-VIDEO

SCART cable

Download from Www.Somanuals.com. All Manuals Search And Download.

System Connections

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Connecting to a TV with Component input terminals (For other countries)

[ For U.S.A. and Canada ]

SelectthescanningmethodoftheComponent

Video output using the COMPONENT VIDEO

OUTPUT switch on the rear panel.

COMPONENT

VIDEO OUTPUT

VIDEO

OUTPUT

AUDIO

COAXIAL OPTICAL

OUTPUT

S-VIDEO

Component cords

INTERLACE: Scanning method is fixed at in-

terlaced scanning.

Audio cord

PROGRESSIVE: When progressive scanning

is unavailable with certain discs, the scan-

ning method is switched automatically to in-

terlaced scanning. When the scanning

method is changed, the scanning status will

be displayed for a few seconds.

Connecting to an Audio component

(For Europe and U.K.)

AV receiver or Amplifier

VIDEO

OUTPUT

AUDIO

OUTPUT

COAXIAL OPTICAL

S-VIDEO

Video cord or S-video cord

Audio cord

Coaxial or Optical cable

(For other countries)

COMPONENT

VIDEO OUTPUT

AV receiver or Amplifier

VIDEO

OUTPUT

AUDIO

OUTPUT

COAXIAL OPTICAL

S-VIDEO

Video cord, S-video cord or

Component cords

Audio cord

Coaxial or Optical cable

1. In case an associated system component is connected, also read the instruction manual of the component.

2. Insert the optical-fiber cable straight into the connector until it clicks.

3. Never bend or bundle the optical-fiber cable.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls and indicators

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

PARENTAL LOCK indicator

REPEAT indicators

TITLE indicator

CHAPTER indicator

TRACK indicator

HOUR indicator

MINUTE indicator

SECOND indicator

PLAY/PAUSE indicator

REPEAT

REPEAT 1 DISC

REPEAT ALL DISCS

REPEAT A-B

DISC NUMBER indicators

RANDOM indicator

Preparations

PROGRAM indicator

INTRO SCAN indicator

P.B.C. indicator

SEQ. MODE indicator

CD indicator

DVD indicator

VCD indicator

MP3 indicator

Display

Character information

display section

DISC SKIP DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

POWER

OFF

SEQUENCE MODE

1 POWER ON / OFF switch

2 Disc tray

3 DISC SKIP key

6 6(Play/Pause) key

7 7(Stop) key

8 0(Open/Close) key

9 SEQUENCE MODE key

4 4(PREV.), ¢(NEXT) (Skip) keys

5 DISC 1 ~ DISC 5 keys/indicators

DIMMER function

Thedisplaybrightnessofthemainunitcanbechanged.

Switching as shown below is done each time the DIMMER

key on the remote control is pressed.

DIMMER

1 Dim

2 Not lit

3 Bright

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of remote control unit

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

The keys on the remote control unit with the same names as on the main

unit have the same function as the keys on the main unit.

DISC

1 Numeric keys

2 CLEAR key

3 DISC SKIP key ^*

4 SHIFT key

)

(

0 REPEAT key

A-B Repeat key

! DIMMER key

@ MENU key

# ON SCREEN key

$ TOP MENU key ^,‡

% AUDIO key

^ ANGLE key

& RETURN key

ENTER key

•

(

ON SCREEN

TOP MENU

DISC

SEQ. MODE

AUDIO

ANGLE

5 SUBTITLE key

DISC SKIP

SHIFT

CLEAR

ON/OFF

(SUBTITLE) ON/OFF key

SUBTITLE

¡,‡

™

6 Cursor Up (5), Down (∞),

Left (2) and Right (3) keys

(,•

MULTI CONTROL

•

(

P.MODE

RANDOM

RETURN

ENTER

7 P.MODE key

∞

* 7(Stop) key

SLOW

STEP

RANDOM key

6(Play/Pause) key ^

8 SLOW (Back slow/

Forward slow) keys

STEP (Back step/

Forward step) keys

REPEAT

A-B

DIMMER

9 1 key/¡ key (Search

key)

4 (PREV.) key/¢

(NEXT) key (Skip key)&

Model : RC-D0308 (Infrared ray system)

Loading batteries

1 Remove the cover.

2 Insert batteries.

3 Close the cover.

÷ Insert two R6/LR6 (“AA”-size) batteries

following the polarity indications.

Operation

Remote

sensor

Insert the power plug into a power outlet, press the

POWER ON/OFF switch of the main unit to ON, then

press the desired remote control key.

Operating range

(approx.)

÷ When pressing more than one remote control keys succes-

sively, press the keys securely by leaving an interval of 1 sec-

ond or more between pressing of keys.

1. The provided batteries are intended for use in operation checking, and their service life may be short.

2. When the remote controllable distance becomes short, replace both of the batteries with new ones.

3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor,

malfunction may occur. In such a case, change the installation position to avoid malfunction.

NNootteess

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Preparations

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback of disc

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Basic play

Preparation

DISC SKIP key

TOP MENU key

6(Play/Pause) key

DISC SKIP key

POWER ON/ OFF switch

POWER

MAIN UNIT

OFF

7(Stop) key

Disc tray

÷ Set the POWER ON/OFF switch to the ON (

÷ After the power is switched ON, there is a delay of about

) position.

0(open/close) key

7(Stop) key

3 seconds before the display is lit.

6(Play/Pause) key

Load a disc.

Label side

1 Open the tray.

MAIN UNIT

2 Place a disc.

3 To set a disc to a different disc tray, press the DISC

SKIP key to change the position of the disc tray.

MAIN UNIT

REMOTE

DISC SKIP

Start playback.

MAIN UNIT

TITLE No. (DVD)

CHAPTER No. (DVD)

REMOTE

Time display

TRACK No. (CD/VCD)

÷ When the 6 key is pressed while a tray is open, the

÷ Each press pauses and plays the disc alternately.

tray closes automatically, and then playback begins.

When a menu screen is recorded on

the disc, the menu screen will be

displayed when the TOP MENU key

or MENU key is pressed. At the menu

screen, the menu can be selected by

pressing the Cursor keys.

When a Disc Menu appears on the screen

NNoottee In case of interactive DVDs, a Disc Menu appears on the

screen. Then press ENTER to select specific menu you

want to play by using Cursor keys.

TOP MENU

To stop playback

RESUME playback

MAIN UNIT

REMOTE

Whenthe7(Stop)keyhasbeenpressedonceduring

playback to stop the playback, and then playback is

startedagain,playwillstartfromthepointwherethe

playback had been stopped. This is called the RE-

SUME function. When the 7 (Stop) key is pressed

againduringstop,theRESUMEfunctioniscancelled.

RESUME is cancelled when 5 minutes have passed in

RESUME status.

Download from Www.Somanuals.com. All Manuals Search And Download.

¡: To search forward

1: To search backward

Using the On-screePnlbaaynbnaecrkdoifsdpilsacy

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Disc playback features

STEP keys

NNootteess

SLOW keys

÷ You won't hear the sound (audio) on the DVD when you're

using the Skip, Search, Step or Slow motion features.

÷ Playback features are not available during the opening cred-

its of a movie.

4, ¢ (Skip) keys

6(Play/Pause) key

1, ¡

(Search)

keys

6(Play/Pause) key

CD DVD

VCD

Skipping chapters or tracks

÷ The chapter (or track) in the direction of the key pressed is

skipped, and the selected chapter (or track) will be played

from the beginning.

MAIN UNIT

REMOTE

÷ When the 4key is pressed once during playback, the chap-

ter (or track) being played will be played from the beginning.

4: To skip backward

¢: To skip forward

CD DVD

VCD

Searching

÷ During playback, press the 1or ¡ key.

÷ Each press switches the searching speed.

REMOTE

(At the time of DVD playback)

1 X 2 (F.SEARCH 1)/(R.SEARCH 1)

2 X 4 (F.SEARCH 2)/(R.SEARCH 2)

3 X 8 (F.SEARCH 3)/(R.SEARCH 3)

4 X 16 (F.SEARCH 4)/(R.SEARCH 4)

Operations

(At the time of CD/VCD playback)

1 X 2 (F.SEARCH 1)/(R.SEARCH 1)*

2 X 4 (F.SEARCH 2)/(R.SEARCH 2)

3 X 8 (F.SEARCH 3)/(R.SEARCH 3)

* No audio is output during the fast forward or fast

reverse operation at the 2x speed (1) of DTS-CD.

÷ Audio is not output during forward or reverse search. (VCD)

÷ Press the 6key at any time to resume normal playback.

DVD

VCD

STEP (freeze frame and frame advance)

÷ During playback, press the STEP keys.

÷ Each time you press the keys, the picture advances one

frame.

REMOTE

STEP

÷ At the time of VCD playback, backward STEP is not possible.

÷ Press the 6key to resume normal playback.

DVD

VCD

Slow motion playback

÷ During playback, press the SLOW keys.

÷ Each press switches the motion speed.

REMOTE

(At the time of DVD playback)

1 F.SLOW 1/16 (R.SLOW 1/16)

2 F.SLOW 1/8

3 F.SLOW 1/4

4 F.SLOW 1/2

(R.SLOW 1/8)

(R.SLOW 1/4)

(R.SLOW 1/2)

SLOW

(At the time of VCD playback)

1 F.SLOW 1/8

2 F.SLOW 1/4

3 F.SLOW 1/2

(R.SLOW is not possible)

÷ Press the 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screePnlbaaynbnaecrkdoifsdpilsacy

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD CD

VCD

Playing discs by changing them

MAIN UNIT

REMOTE

MAIN UNIT

REMOTE

÷ Press DISC SKIP key to skip a disc.

÷ When the DISC SKIP key is pressed while the tray open, the

tray simply rotates.

DISC SKIP

DVD CD

VCD

Playing from the selected disc

MAIN UNIT

÷ Press one of the DISC1 to DISC5 key to select a disc.

÷ The disc number indicator above one of the DISC1 to DISC5

key on the main unit lights up and playback starts.

DISC 2 DISC 3 DISC 4 DISC 5

DISC 1

÷ At the time of operating on the remote, press the 1 to 5

(DISC) key within 3 seconds after pressing SHIFT key.

REMOTE

Press within 3 seconds after

pressing the SHIFT key.

If a disc is added or removed during playback or stop,

the disc indicator may show incorrect information on

discs. In this case, press the DISC1 to DISC5 keys so

that the unit loads the correct positioning of each disc

and judges its presence.

NNoottee

DVD

VCD

Switching sequential play mode

The player is capable of sequential playback using the 5disc carousel disc changer. If a DVD and/or VCD is mixed

in the discs to be played sequentially, the sequential playback may stall in the middle while the menu remains

displayed. In such a case, switch the sequential play mode of the player.

MAIN UNIT

÷ Press SEQUENCE MODE key to select play mode.

At the time of operating on the remote, press the 6 (SEQ.MODE)

key within 3 seconds after pressing SHIFT key.

÷ Each press switches the sequential play mode.

SEQUENCE MODE

1 Sequential play mode 1 (SEQ.1 )

2 Sequential play mode 2 (SEQ.2 )

3 Nomal play mode

Sequential play mode 1("SEQ.1" lit)

REMOTE

All discs can be played including DVD discs.

÷ When there is a P.B.C.-compatible VCD or a DVD on the tray,

Press within 3 seconds after

pressing the SHIFT key.

sequential playback may sometimes be interrupted and the

menu displayed. In this case, perform menu playback.

Sequential play mode 2("SEQ.2" lit)

Playback of DVD discs is skipped in order not to interrupt sequential

playback.

÷ With a P.B.C.-compatible VCD, playback is performed by

switching P.B.C. automatically to off.

÷ When there is a VCD on the tray, SEQ. 2 playback may some-

time be intrrupted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key

on the remote while a disc is playing. Use the Cursor (2/3) keys on the remote to move through the different fea-

tures in the Banner Display. Each feature is illustrated with an icon.

1 During playback, press the ON SCREEN key on

When playing a DVD

the remote.

DISC NUMBER

BOOKMARKS

CHAPTER

SUBTITLES

ANGLES

TITLE

AUDIO

DISC TYPE

ON SCREEN

TIME INDICATOR

DISC NUMBER

When playing a CD/VCD

2 Press the Cursor left/right (2/3) keys to high-

light a banner display icon.

INTROSCAN

TIME INFORMATION

TRACK

BOOKMARKS

DISC TYPE

MULTI CONTROL

TIME INDICATOR

Time indicator contents

Operations

3 Press the ENTER key.

Switch the CD/VCD time indicator as follows.

1 Select the time information with the cursor key.

2 Each time the ENTER key is pressed, the time in-

dicator changes as follows.

1 "Track Elapsed" :

Elapsed time of the track being played

2 "Track Remain" :

ENTER

Remaining time of the track being played

3 "Disc Elapsed" :

Elapsed time of the disc being played

4 "Disc Remain" :

Remaining time of the disc being played

To display disappear from the screen

Press the ON SCREEN key or CLEAR key.

NNootteess

÷ You can only access the banner display when you're playing

a disc.

ON SCREEN

CLEAR

÷ The banner display feature are only available if the disc was

created with that particular feature (i.e., if you select the Sub-

title icon, you won’t be able to change the subtitle language

unless the author of the disc created the disc with subtitles).

÷ The invalid symbol appears on the screen when you press

a key that doesn't have any function. If one of the icons is

"grayed out," the banner display feature isn't available for the

disc you're playing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

CD VCD

DVD

Selecting a Title

SelectingaChapterorTrack

Some discs contain more than one title.

For example, there might be four movies on one disc

(each movie might be considered a title).

BecauseDVDVIDEOdiscsusedigitaltechnology,atitle

canbedividedintoindividualchapters(similartotracks

on a CD). You can skip a specific chapter by using the

Chapter section in the Banner Display.

1 During playback, press the ON SCREEN key on

the remote.

ON SCREEN

2 Press the Cursor left/right (2/3) keys until the

TITLE icon is highlighted.

CHAPTER or TRACK icon is highlighted.

MULTI CONTROL

3 Press the ENTER key.

("T__" appears)

("C__" or "Tr__" appears)

ENTER

4 Use the numeric keys to enter the title number.

4 Use the numeric keys to enter the chapter or

track number.

When you enter a one-digit Title number, you may

have to press the ENTER key on the remote after

pressing the numeric key (1~9) on the remote. Oth-

erwise press 0 first and the other value. Then play

starts. This varies depending on number of Title

within the disc you're playing.

When you enter a one-digit chapter or track num-

ber, you may have to press the ENTER key on the

remote after pressing the numeric key (1~9) on the

remote. Otherwise press 0 first and the other value.

Then play starts. This varies depending on number

of chapter or track within the disc you're playing.

NNootteess

NNoottee

÷ The Chapter feature won't work if the disc isn't formatted

with separate chapters.

Some discs only have one title.

÷ P.B.C. on mode of VCD, the Selecting a Track function may

not work.

‡

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Select Audio Language

Select Subtitle Language

If the disc was created with different language tracks,

you can use the Banner Display to temporarily change

the DVD player’s Audio setting.

You can change the Subtitle language while you’re

watching a disc (but only if the disc was created

with subtitles).

Using the on-screen banner display

1 During playback, press the ON SCREEN key on

the remote.

ON SCREEN

2 Press the Cursor left/right (2/3) keys until the

AUDIO icon is highlighted.

SUBTITLE icon is highlighted.

MULTI CONTROL

3 Press the ENTER key.

ENTER

3 Press the ENTER key.

ENTER

Operations

The audio menu appears

The subtitle menu appears

Displayed when

SUBTITLE is ON

4 Select the subtitle language with press the EN-

4 Select the audio language with press the EN-

TER key.

5 Press the SUBTITLE ON/OFF key to subtitle ON

or OFF.

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

Using the AUDIO key on the remote

Using the SUBTITLE key on the remote

1 During playback, press the AUDIO key on the

1 During playback, press the SUBTITLE key on the

remote.

SUBTITLE

AUDIO

2 Select the subtitle language with press the EN-

TER key or SUBTITLE key.

2 Select the audio language with press the EN-

TER key or AUDIO key.

3 When the SUBTITLE ON/OFF key is pressed,

subtitles will be displayed. Switching between

display of subtitles and no display of subtitles is

done each time the key is pressed.

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

1. The language feature only works if the disc was cre-

Displayed when

SUBTITLE is ON

ON/OFF

NNootteess

ated with multiple audio tracks.

2. When you chose an audio language from the Banner

Display, you only override the audio language set-

ting in the DVD Player's main menu (in the Language

Preferences menu within Setup menu) temporarily.

1. The subtitle feature only works if the disc was cre-

ated with multiple subtitle tracks.

NNootteess

2. The subtitle menu of the disc appears in some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

CD VCD

DVD

Select Camera angle

Using IntroScan function

Some disc contains multiple angles particular scene or

sequence. If the disc only has one angle, this feature

won’t work.

IntroScan plays the first few seconds of each track on

the CD similar to the scan feature that's on many car

radios.

Using the on-screen banner display

1 During playback, press the ON SCREEN key on

the remote.

ON SCREEN

2 Press the Cursor left/right (2/3) keys until the

ANGLE icon is highlighted.

IntroScan icon is highlighted.

MULTI CONTROL

3 Press the ENTER key.

ENTER

The ANGLE menu appears

ENTER

÷ The first 10 seconds of each track play.

4 Select the angle with press the ENTER key.

÷ After Intro Scan goes through all of the tracks, it stops.

÷ If you want to stop IntroScan while it’s in progress,

just press ENTER key on the remote (the current track

starts playing in its entirety).

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

Using the ANGLE key on the remote

NNoottee

1 During playback, press the ANGLE key on the

P.B.C. on mode of VCD, the IntroScan function may not

remote.

work.

‡

ANGLE

2 Select the Camera angle with press the ENTER

key or ANGLE key.

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

CD VCD

DVD

Using Bookmarks

The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 9 bookmarks.

Create the bookmark

Recalling a bookmarked scene

1 During playback, press the ON SCREEN key on

the remote.

ON SCREEN

2 Press the Cursor left/right (2/3) keys until the

BOOKMARK icon is highlighted.

MULTI CONTROL

3 Press the ENTER key.

ENTER

Return to the previous banner display

Operations

The bookmark menu appears

The bookmark appears on under square

4 When you reach the scene you want to mark,

4 Press the Cursor up (5) key on the remote to go

press ENTER key.

the parts of the Bookmark menu.

ENTER

MULTI CONTROL

The bookmark appears on under square

÷ Press the ON SCREEN key or CLEAR key to switch

5 Use the Cursor left/right (2/3) keys on the re-

mote to select the bookmarked scene you want

to activate.

the menu off.

Clearing a bookmark

MULTI CONTROL

÷ The bookmark is cleared each time a disc is removed

from the player or when the power is turned off.

6 Press the ENTER key to active the bookmark.

NNootteess

ENTER

÷ If all 9 bookmarks are in use, you can still mark new scenes,

but the previous bookmarks will be erased.

÷ This function can not be used over several discs.

÷ Depending on the disc, the Bookmark function may not

work.

÷ You can go to bookmarked scene by the numeric key

(1~9) on the step 5.

÷ Press the ON SCREEN key or CLEAR key to switch the

menu off.

÷ P.B.C. on mode of VCD, the Bookmark function may not

work.

‡

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

CD VCD

DVD

Repeat play

A-B Repeat play

Desired titles or discs can be played back repeatedly.

÷ "Repeat All Discs" : Repeat all disc in tray that is playing.

÷ "Repeat 1 Disc" : Repeat the disc that is playing.

÷ "Repeat Title" : Repeat the title that is playing.

The A-B repeat function lets you mark a segment to re-

peat between the beginning "A" and the end "B" of the

segment you want to replay.

÷ "Repeat Chapter" : Repeat the chapter that is playing.

÷ "Repeat Track" : Repeat the track that is playing.

1 Press the A-B key on the remote when you want

to choose a scene (sound) as the beginning

point.

During playback, press the REPEAT key on the

remote.

REPEAT

A-B

The Repeat A- display appears

The Repeat display appears

Lit

Each press the key switches the REPEAT mode

At the time of DVD playback

1 "Repeat All Discs" : Display lit "REPEAT ALL DISCS"

2 "Repeat 1 Disc" : Display lit "REPEAT 1 DISC"

3 "Repeat Title" : Display lit "REPEAT"

4 "Repeat Chapter" : Display lit "REPEAT"

5 "Repeat Off"

Display

2 Press the A-B key again to choose a scene

(sound) as the end point.

At the time of CD/VCD playback

1 "Repeat All Discs" : Display lit "REPEAT ALL DISCS"

2 "Repeat 1 Disc" : Display lit "REPEAT 1 DISC"

3 "Repeat Track" : Display lit "REPEAT"

4 "Repeat Off"

A-B

The Repeat A-B display appears

At the time of REPEAT mode

"REPEAT" is light.

Lit

Display

÷ To cancel repeat playback, press the REPEAT key and

select "Repeat off".

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

÷ To cancel A-B Repeat playback, press the A-B key and

select "Repeat off".

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

"MP3 Repeat play" q

NNoottee

P.B.C. on mode of VCD, the A-B Repeat play function may

NNootteess

not work.

‡

÷ P.B.C. on mode of VCD, the Repeat play function may not

work.

‡

÷ When there is a P.B.C.-compatible VCD or a DVD on the tray,

Repeat All Discs playback may sometimes be interrupted

and the menu displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

CD VCD

Random play

The tracks of the disc are played in random order.

During playback or stop mode, press RANDOM

key on the remote.

RANDOM

The Random Play display appears

To repeat random play

During random playback, press the REPEAT

key on the remote.

Lit

REPEAT

Each press the key switches the mode.

At the time of CD playback

Display

1 Display lit "REPEAT ALL DISCS"

2 Display lit "REPEAT 1 DISC"

3 Repeat canceled

Each time you press RANDOM key on the remote,

random play would be on and off.

1 "Random Play"

2 "Standard Play"

At the time of VCD playback

1 Display lit "REPEAT ALL DISCS"

2 Repeat canceled

Operations

The Standard Play display appears when random is off

Random play in "Repeat all Discs" mode:

Random play is performed for one disc, and when all titles of

that disc have been played, the unit will switch to the next disc.

2 All titles of this disc will be played in random order in the

same way, and then the unit will switch to the next disc.

3 When random play has been completed for all discs, the unit

will return to the first disc and random play will be repeated.

÷ The menu is switched off when no operation is per-

formed for about 5 seconds.

"MP3 Random play" q

NNootteess

÷ When the RANDOM key is pressed during playback, the

tracks of the disc being played will be selected in random

order for playback.

÷ After all tracks of a disc have been played in random order,

playback will stop. (Random mode will be cancelled.)

÷ When playing a DVD, the Random function may not work.

÷ P.B.C. on mode of VCD, the Random play function may not

work.

‡

÷ When switching to Random mode with SEQ. Mode ON,

SEQ. Mode automatically becomes OFF.

With later return from Random mode to normal playback,

SEQ. Mode returns to ON.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD VCD

DVD

Program play

Using the On-screen banner display

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

You can listen to the desired tracks or chapters of the current disc in any desired order.

Registering and playing the program

Insert all of the discs to be used in programming in the tray, close it and press the DISC 1 to 5 keys so that the player reads

the disc information by playing each disc until display "READING" disappears. (If the tray is opened after this, the above

procedure should be repeated so that the player reads all disc information again.)

Program Edit

Program edit display appears.

1 During stop mode, press the P.MODE key on

the remote.

PROGRAM EDIT

Playlist

Lit

Disc

Title

Chapter

All

Add

Delete

Play

P.MODE

(12)

(2)

Done

Display

2 Select specific disc/ title/ chapter or track by

Press Cursor up/down (5/∞) keys or numeric

keys (0-9).

MULTI CONTROL

(An example of DVD program edit menu)

: Selected icon

: An icon which can be selected

3 Press the ENTER key.

: An icon which presently can not be selected

PROGRAM EDIT

Playlist

ENTER

Disc

Title

Chapter

All

Add

Delete

Play

All

(12)

(2)

4 Select "Add" icon on the screen to register

selected value onto Playlist, then press the

ENTER key.

Done

MULTI CONTROL

ENTER

NNoottee

5 You can select maximum 32 values by repeating

"Add" icon

: Add value onto "Playlist"

step 2 - 4.

"Delete" icon : Delete value from "Playlist"

"Insert" icon : Insert value in "Playlist"

6 Press the 6key to start playback.

"Play" icon

: Play program play

"Done" icon : Return to stop or resume mode

÷ When you don’t add values onto "Playlist" and return to

play mode, select "Done" icon and press ENTER key on

the remote.

To repeat program play

During program playback, press the REPEAT

key on the remote.

÷ While a disc is playing, press P.MODE key on the remote

to start Program play

÷ To return to standard play, press the P.MODE key again.

÷ MP3 discs can not be programmed with this program mode.

(MP3 program play w)

÷ When switching to Program mode with SEQ. Mode ON,

SEQ. Mode automatically becomes OFF.

REPEAT

Each press the key switches the mode.

1 Display lit "REPEAT ALL DISCS"

2 Repeat canceled

With later return from Program mode to normal playback,

SEQ. Mode returns to ON.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the On-screen baPnrnoegradmisplay

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Insert chapter or track

During stop mode, press the P.MODE key on the remote

1 Select specific disc/ title/ chapter or track to

insert by Press Cursor up/down (5/∞) keys or

numeric keys (0-9).

MULTI CONTROL

Program edit display appears.

PROGRAM EDIT

Playlist

Disc

Title

Chapter

All

Insert

Delete

Play

2 Move the cursor with the Cursor right (3) key to

the "Playlist" and select the column to be added

with the Cursor up/down (5/∞) keys. (The color

of the column where the Cursor is located will

change.)

All

(12)

(2)

Done

All

MULTI CONTROL

3 Press the Cursor left (2) key, use the Cursor

up/down (5/∞) keys to move the Cursor to

the "Insert" icon, and press the ENTER key.

(An example of DVD program edit menu)

PROGRAM EDIT

Playlist

Disc

Title

Chapter

All

Insert

Delete

Play

All

MULTI CONTROL

ENTER

(12)

(2)

Operations

Done

All

The new chapter or track will be inserted before

(above) the selected column.

Delete Program

During stop mode, press the P.MODE key on the remote

1 Move the cursor with the Cursor right (3) key to

the "Playlist" and select the column to be deleted

with the Cursor up/down (5/∞) keys. (The color

of the column where the Cursor is located will

change.)

PROGRAM EDIT

Playlist

Disc

Title

Chapter

All

Add

Delete

Play

All

(12)

(2)

Done

All

MULTI CONTROL

2 Press the Cursor left (2) key, use the Cursor

up/down (5/∞) keys to move the Cursor to

the "Delete" icon, and press the ENTER key. Or

press the CLEAR key.

MULTI CONTROL

ENTER

Release Program play

In following case, Program play would be released.

1. When you open and close tray.

2. When you turn power off and on.

Selected value deletes

P.B.C. on mode of VCD, the Progam play function

NNoottee

may not work.

‡

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Set up menu

The initial setup of the player, which has been made at the factory, can be changed to the desired setup.

1 During stop mode or resume mode, press MENU

key on the remote.

Current setup menu display appears on the screen.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the item, then press the ENTER

key to access the sub features

MULTI CONTROL

ENTER

(Menu display example)

Audio / Subtitle

(Disc languages)

: This sets the language to be used when playing a disc. (If a disc does not contain the recording the

selected language, it is played in the priority language set for each disc.)

Menus

: This sets the initial setup of language as well as the language used in on-screen messages such as

"PLAY".

Rating

: This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children.

However, even when a DVD disc is marked “Adult-oriented” or so on the label, its viewing cannot

be restricted unless the restriction level is recorded in the disc itself.

Password

TV Aspect

: The password for rating setting, change, cancellation, etc. is set.

: This sets the screen size (4:3 or 16:9 aspect ratio) according to the connected TV.

4 x 3 letterbox

: Choose this setting if you would prefer to see movies in their original

aspect ratio. You will see the entire frame of the movie, but it will occupy

a smaller portion of the screen. This setting may result in the movie ap-

pearing with black bars at the top and bottom of the screen.

: Choose this setting if you want the movie to fill the entire screen of your

TV.Youwon’tseepartofthepicture(particularlytherightandleftedge).

Somediscproducedinawidescreenformatcan’tbecroppedinthisfash-

ion, which means the black bars would appear at the top and the bottom

of the screen.

4 x 3 Pan Scan

16 x 9 Widescreen

: Choose this setting if your DVD player is connected to a widescreen TV.

Dynamic Range

: ThisissettoONwhenthevolumechangeshouldnotbecomeoverlylarge, forexamplewhenlisten-

ing late at night.

Digital Audio Out

Linear PCM

: This sets the type of audio output from the digital audio output jack.

: The player can output digital signal with maximum sampling rate of 96 kHz from the digital audio

outputconnector.WhenaDVDdiscrecordedinhighsamplingratePCMisplayed,thissettingmakes

it possible to select whether the signal is converted into 48 kHz signal.

How to use the RETURN key

When the RETURN key is pressed, the display returns to the previous screen

(STOP mode).

RETURN

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Select Audio Language

Select Subtitle Language

1 Press Cursor up/down (5/∞) keys on the remote

to select "Audio" on the set up menu display, then

press the ENTER key.

1 Press Cursor up/down (5/∞) keys on the remote

to select "Subtitles" on the set up menu display,

then press the ENTER key.

MULTI CONTROL

ENTER

(Audio menu appears.)

(Subtitle menu appears.)

Operations

2 Press Cursor up/down (5/∞) keys on the remote

to select specific Audio language, then press the

ENTER key.

2 Press Cursor up/down (5/∞) keys on the re-

mote to select specific Subtitle language, then

press the ENTER key.

MULTI CONTROL

ENTER

To select other language

1 Select "Other" and press ENTER key

2 Input code in the first digit by Press Cursor

up/down (5/∞) keys or numeric keys on the

remote and repeat other 4 code with same

way.

2 Input code in the first digit by Press Cursor

up/down (5/∞) keys or numeric keys on the

remote and repeat other 4 code with same

way.

3 Press the ENTER key on "OK" icon.

(DVD menu language code list e)

÷ Press 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Select Menu Language

Select Rating

This part of DVD rating lets you determine how your

playerwillreactdiscsthatcontainmoviesthatarerated

(in the U.S.A. the Motion Pictures Association of

America rates movies as G, PG, PG-13, etc.).

1 Press Cursor up/down (5/∞) keys on the remote

to select "Menus" on the set up menu display,

then press the ENTER key.

1 Press Cursor up/down (5/∞) keys on the remote

to select "Rating" on the set up menu display,

then press the ENTER key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

(Menus appears.)

When a password already has been set, the screen for

change of the entered password will be displayed. In

that case, enter the password.

⁄

(Rating aspect menu appears.)

2 Press Cursor up/down (5/∞) keys on the remote

to select specific Menu language, then press the

ENTER key.

MULTI CONTROL

ENTER

2 Press Cursor up/down (5/∞) keys on the re-

mote to highlight rated titles, then press the

ENTER key.

÷ Press 6key to resume normal playback.

MULTI CONTROL

ENTER

÷ Press 6key to resume normal playback.

Parental lock level

Level 8: All DVDs can be played back.(Factory preset)

Level 7 to 2: DVDs for general audiences/children can be

played back. (DVDs for adults are prohibited.)

Level 1: DVDs for children can be played back. (DVDs for

adults/general audiences are prohibited.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Password

Set password

1 Press Cursor up/down (5/∞) keys on the remote

to select "Password" on the set up menu display,

then press the ENTER key.

4 Press ENTER key to finish password input (Con-

firm Password display appears below Enter

Password display).

MULTI CONTROL

ENTER

(Password menu appeaars.)

5 Press Cursor up/down (5/∞) keys or numeric

keys on the remote to enter again password

that you entered.

Operations

MULTI CONTROL

2 After select "Set Password", press the ENTER

key.

MULTI CONTROL

ENTER

6 Press the ENTER key on "OK" icon.

ENTER

3 Press Cursor up/down (5/∞) keys or numeric

keys on the remote to enter password.

÷ Press 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Password (continued)

Change password

1 Press Cursor up/down (5/∞) keys on the remote

to select "Password" on the set up menu display,

then press the ENTER key.

4 Press Cursor up/down (5/∞) keys or numeric

keys on the remote to enter password.

MULTI CONTROL

ENTER

5 Press ENTER key to finish password input (Con-

firm Password display appears below Enter

Password display).

(Enter Password menu appears.)

6 Press Cursor up/down (5/∞) keys or numeric

keys on the remote to enter again password

that you entered.

2 Press Cursor up/down (5/∞) keys or numeric

keys on the remote to enter password.

Press the ENTER key on "OK" icon.

MULTI CONTROL

ENTER

7 Press the ENTER key on "OK" icon.

ENTER

3 Press Cursor up/down (5/∞) keys to select

"Change Password", then press ENTER key.

÷ Press 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Password (continued)

TV aspect

Clear password

1 Press Cursor up/down (5/∞) keys on the remote

to select "TV Aspect" on the set up menu dis-

play, then press the ENTER key.

1 Press Cursor up/down (5/∞) keys on the remote

to select "Password" on the set up menu dis-

play, then press the ENTER key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

(Enter Password menu appears.)

(TV Aspect menu appears.)

Operations

2 Press Cursor up/down (5/∞) keys or numeric

keys on the remote to enter password.

Press the ENTER key on "OK" icon.

2 Press Cursor up/down (5/∞) keys on the remote

to select TV Aspect menu, then press the ENTER

key.

MULTI CONTROL

ENTER

MULTI CONTROL

ENTER

÷ Press 6key to resume normal playback.

3 Press Cursor up/down (5/∞) keys to select

"Clear Password", then press ENTER key.

÷ Press 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Dynamic Range

Digital Audio Out

PCM : Choose this setting for all connection scenarios, ex-

cept the Dolby Digital or DTS receiver or decoder con-

nection.

Dolby Digital : ChoosethissettingifyouconnectedDolby

Digital receiver or decoder to your DVD player.

DTS : Choose this setting if you connected DTS receiver or

decoder to your DVD player

1 Press Cursor up/down (5/∞) keys on the remote

to select "Dynamic Range" on the set up menu dis-

play, then press the ENTER key.

MULTI CONTROL

ENTER

For Europe and U.K.

MPEG/DTS : Choose this setting if you connected DTS re-

ceiver, decoder or MPEG audio to your DVD player.

(Dynamic Range menu appears.)

1 Press Cursor up/down (5/∞) keys on the remote

to select "Digital Audio Out" on the set up menu

display, then press the ENTER key.

MULTI CONTROL

ENTER

(Digital Audio Out display appears.)

2 Press Cursor up/down (5/∞) keys on the remote

to select Dynamic Range mode (on or off), then

press the ENTER key.

MULTI CONTROL

ENTER

2 Press Cursor up/down (5/∞) keys on the remote

to select specific Digital Audio Out mode, then

press the ENTER key.

÷ Press 6key to resume normal playback.

MULTI CONTROL

ENTER

DTS disclaimer clause

When playing DTS-encoded (CDs, LDs, DVDs), excessive

noise will be exhibited from the analog stereo outputs. To

avoid possible damage to the audio system, the consumer

shouldtakeproperprecautionswhentheanalogstereooutputs

of the DVD player is connected to an amplification system.

To enjoy DTS Digital Surround™ playback, an external 5.1

channel DTS Digital Surround™ decoder system must be

connected to the digital output (S/P DIF, AES/EBU, or

TosLink) of the DVD player.

÷ Press 6key to resume normal playback.

NNoottee

When the DTS of Digital Audio Out or the Dolby Digital

setting and the format recorded on the disc are different

from each other, audio may not be put out. Please switch

according to the indication on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD

Linear PCM

96kHz => 48kHz : Even in case of 96 kHz digital signal,

DVD will deliver 48 kHz signal out.

96kHz => 96kHz : In case of 96 kHz digital signal, DVD

will deliver 96 kHz signal out. In this

case your receiver should control 96

kHz signal.

1 Press Cursor up/down (5/∞) keys on the remote

to select "Linear PCM" on the set up menu dis-

play, then press the ENTER key.

MULTI CONTROL

ENTER

(Linear PCM display appears.)

Operations

2 Press Cursor up/down (5/∞) keys on the remote to

select "96kHz => 48kHz" or "96kHz => 96kHz",

then press the ENTER key.

MULTI CONTROL

ENTER

÷ Press 6key to resume normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu playback

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

VCD

Hierarchical structure of VCD menus

When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more

details items may be displayed. When a number of menus are connected in multiple layers in this way, it is said that

the menus have a hierarchical structure. In this structure, the desired scene can be reached by repeating item selec-

tions on the menu screens.

Example for a hierarchical structure

First level (menu)

Second level (submenu)

Third level (scenes)

Advancing

Returning

When an item is selected on the menu screen with the

ENTER(SELECT)keyorthenumerickeys,advanceismade

tothenextlowermenulevel.Whentheadvancedestination

is the "scene" to be played, the contents will be played.

Each time the RETURN key is pressed, return is made to the

next higher menu.

÷ When several menus (scenes) can be selected in each

level, screen switching is possible with the keys ¢

(NEXT) and 4(PREV.).

Examples of operation keys and indications used during VCD playback

ENTER or SELECT

ENTER

Soft jacket indication

KENWOOD operation key

RETURN

÷ Depending on the software, the jacket indication may differ from the above.

Download from Www.Somanuals.com. All Manuals Search And Download.

SMeteUnpufpulnacybtiaocnks

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

VCD

Playback without using the menu playback function

(In case of a P.B.C.-compatible VCD) (To P.B.C. On or Off)

During VCD stop mode or play mode, Press the

TOP MENU key on the remote control unit.

÷ For the track numbers, refer to the disc jacket or other mate-

rial.

÷ P.B.C. off mode : Without using menu playback function.

P.B.C. off mode

Goes off

TOP MENU

To return to menu playback

Press the TOP MENU key again.

P.B.C. on mode

Lit

VCD

Selecting the Audio channel

You can choose to play back only the right or the left channel of audio recorded on the disc, or you can select stereo

playback. This function is used for purposes such as selecting the vocal track on a Karaoke disc.

During VCD playback, press AUDIO key on the re-

mote.

Operations

Each press the key switches the mode.

AUDIO

1 Stereo

2 Left

3 Right

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 function

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Guidance of MP3

MP3 media that can be played back with this equipment

Usable media : CD-ROM, CD-R, CD-RW

Usable formats : ISO9660 level 1 (excluding expanded formats)

Files that can be played back : MP3 files

Creating media for playing back on this equipment

Compressing MP3

Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follow.

MP3 Files : 128kbps recommended (32kbps-320kbps)

÷ This unit is compatible with 32 kHz, 44.1 kHz(recommended) and 48 kHz sampling frequencies.

Naming folders and files

Single-byte characters between A and Z, single-byte numerais between 0 and 9, and the single-byte underscore(_) can be displayed.

ensure that the "MP3" (MP3 files) extension log is attached to all file names.

÷ Never add the MP3 extension log to any files other than MP3 files. If the MP3 extension log is added to any files other than

MP3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers,

resulting in damage of adverse effects.

Confirming media and files

Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media.

Check to ensure that the saved file can be played back normally.

÷ It is not possible to confirm that files can be played back correctly while they are being saved onto the media.

When saving files onto media

Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session

has not be closed or finalized will not be played back correctly with this equipment.

÷ There are cases were the folder names and file names will not be displayed correctly depending on the software used to

save them.

÷ Do not store files or folders other than MP3 on media to be played back with this equipment.

÷ It is recommended that ten or less sessions are stored when recording MP3 files onto a media.

÷ Some time may be required until the playback of multi-session discs starts.

÷ There are cases where playback is not possible when MP3 files (CD-ROM) and music CD infomation (CD-DA) are saved on

the same media.

Example for a hierarchical structure

Download from Www.Somanuals.com. All Manuals Search And Download.

SetMUPp3fufunncctitoionns

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Playing back MP3

÷ It is not possible to play back folders and files(up to 223) that

exceed the maximum limitations of the media.

MP3 On-screen display

÷ A certain amount of time is required for the player to

confirm the media on which MP3 files have been re-

corded before playback will commence.

÷ The files will be played back in the sequence in which

they were recorded (written).

Playing file name

Playing file No.

Playing mode

Time elapsed

Playback

Each press pauses and plays the disc alternately.

(When you insert the MP3 media, playback will start

automatically.)

LIKE-1

Standard Play

0:05:34

MAIN UNIT

REMOTE

MY SONG1

HALLOW-1

MEGADETH

MADONNA

RCY23MNN

EXTREME

CARMAN-1

ITALY

(When you insert MP3 media, the MP3 On-screen

display appears)

LIKE-1

Standard Play

0:00:01

EGALES

ALL CLEAR

LIKE-1

Folder icon

LUCKY-1

LET IT-1

Operations

YESTERDA

Root icon

ALL CLEAR icon

TRUE-1

OPEN-1

WHIHE-1

WHIHE-2

NEVER-2

LIKE-1

ALL CLEAR

Program Play

To stop playback

LIKE-1

HALLOW-1

LUCKY-1

LIKE-3

Press the 7(STOP) key.

LIKE-1

MAIN UNIT

REMOTE

INTORO-1

YESTERDA

WHIHE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

HOLIDAY

OPEN-1

WHIHE-1

Skipping files

ALL CLEAR

During playback, press the 4or ¢ key.

Files

MAIN UNIT

REMOTE

Programwindow

Return folder icon

NNoottee

Folder names and file names are displayed up to 8 charac-

ters. When folder names and file names are recorded with

more than 8 characters, the names will be displayed in abbre-

viated form.

4: To skip backward

¢: To skip forward

Fast forwarding and fast reversing is not possible with

MP3 files.

NNoottee

Download from Www.Somanuals.com. All Manuals Search And Download.

SetMUPp3fufunncctitoionns

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Selecting MP3 files

÷ The files and folders in the selected folder appear.

1 Press Cursor up/down (5/∞) keys on the re-

mote to select the folder, then press the EN-

TER key.

LIKE-1

Standard Play

0:05:34

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

MULTI CONTROL

ENTER

OPEN-1

WHIHE-1

WHIHE-2

NEVER-2

ALL CLEAR

2 Press Cursor up/down (5/∞) keys on the re-

mote to select the file, then press the ENTER

key.

LIKE-1

Standard Play

0:05:34

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

MULTI CONTROL

ENTER

OPEN-1

WHIHE-1

WHIHE-2

ALL CLEAR

÷ Playback will start from selected file.

PressENTERkeyonRETURNfoldericon

to move to the upper layer.

Selects the files to be played back directly

File No.

1 Press the Cursor right (3) key on the remote to

invert the file numbers.

LIKE-1

Standard Play

0:05:34

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

MULTI CONTROL

OPEN-1

WHIHE-1

WHIHE-2

NEVER-2

2 Press the numeric keys on the remote to enter

ALL CLEAR

the desired file number.

WHIHE-1

Standard Play

0:00:01

WHIHE-1

WHIHE-2

NEVER-2

÷ If "_ _ _" is displayed after completion of the file number

entry, press the ENTER key before "_ _ _" disappears.

÷ Playback will start from selected file.

ALL CLEAR

Download from Www.Somanuals.com. All Manuals Search And Download.

SetMUPp3fufunncctitoionns

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

MP3 Repeat play

Desired folders or discs can be played back repeatedly.

÷ "Repeat All Discs" : Repeat all disc in tray that is playing.

÷ "Repeat 1 Disc" : Repeat the disc that is playing.

Each press the key switches the REPEAT mode

1 "Repeat All Discs": Display lit "REPEAT ALL DISCS"

2 "Repeat 1 Disc" : Display lit "REPEAT 1 DISC"

3 "Repeat 1 Folder" : Display lit "REPEAT"

4 "Repeat Track" : Display lit "REPEAT 1"

5 "Standard Play"

÷ "Repeat 1 Folder" : Repeat the folder that is playing.

÷ "Repeat Track" : Repeat the file that is playing.

During playback, press the REPEAT key on the

remote.

LIKE-1

Repeat 1 Disc

0:05:34

REPEAT

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

÷ To cancel repeat playback, press the REPEAT key and

select "Standard Play".

OPEN-1

WHIHE-1

HOLIDAY

WHIHE-2

NEVER-2

INTORO-1

ALL CLEAR

NNoottee

Lit

When the folder played by repeat play contains subfolders,

the files in the subfolders cannot be played back.

Display

Operations

MP3 Random play

The files of the disc are played in random order.

Each time you press RANDOM key on the remote, random

play would be on and off

During playback or stop mode, press RANDOM

key on the remote.

1 "Random Play"

2 "Standard Play"

RANDOM

LIKE-1

Random Play

0:05:34

÷ When the RANDOM key is pressed during playback,

the tracks of the disc being played will be selected in

random order for playback.

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

÷ After all tracks of a disc have been played in random

order, playback will stop. (Random mode will be can-

celled.)

OPEN-1

WHIHE-1

HOLIDAY

WHIHE-2

NEVER-2

INTORO-1

ALL CLEAR

To repeat random play

Lit

During random playback, press the REPEAT

key on the remote.

REPEAT

Display

Each press the key switches the mode.

1 Display lit "REPEAT ALL DISCS"

2 Display lit "REPEAT 1 DISC"

3 Repeat canceled

NNoottee

It is not possible to perform random play by specifying a

folder name.

Download from Www.Somanuals.com. All Manuals Search And Download.

SetMUPp3fufunncctitoionns

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

MP3 program playback

You can listen to the desired files of the current MP3 disc in any desired order.

Program Edit

1 During stop mode, press the P.MODE key on the

remote.

Lit

P.MODE

Display

2 Press Cursor up/down (5/∞) keys on the remote

to select the file, then press the ENTER key.

LIKE-1

Program Edit

0:00:00

MULTI CONTROL

ENTER

LIKE-1

LUCKY-1

LET IT-1

LUCKY-1

LIKE-1

LET IT-1

LUCKY-1

YESTERDA

TRUE-1

STERDA

LET IT-1

TRUE-1

YESTERDA

OPEN-1

OPEN

TRUE-1

WHIHE-1

OPEN-1

÷ The selected file go to program window.

÷ You can select a maximum of about 100 files by re-

peating step 2. However, note that the maximum

number of programmable files depending on the num-

ber of files and folders in the MP3 disc and on the total

number of characters used in the file and folder

names.

HOLIDAY

WHIHE-1

INTORO-1

WHIHE-2

ALL CLEAR

PressENTERkeyonRETURNfoldericon

to move to the upper layer.

3 Press 6key to start program playback.

÷ To return to standard play, press the P.MODE key

again.

÷ If a file number is entered during editing or playing a

MP3 program, the program mode will be canceled.

÷ When file names exceed eight characters or when the

number of files and folders on the disc exceeds 400, the

number of files which can be programmed will be re-

duced.

Program repeat play is not available with MP3 discs.

NNoottee

Delete Program

LUCKY-1

During stop mode, press Cursor left/right (2/3)

keys on the remote to select the "ALL CLEAR"

icon, then press the ENTER key.

Program Edit

0:00:00

LIKE-1

LUCKY-1

LET IT-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

YESTERDA

TRUE-1

OPEN-1

WHIHE-1

HOLIDAY

WHIHE-1

HOLIDAY

INTORO-1

ALL CLEAR

MULTI CONTROL

ENTER

LUCKY-1

Program Edit

0:00:00

LIKE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

LUCKY-1

LET IT-1

YESTERDA

TRUE-1

÷ The program deletes.

OPEN-1

WHIHE-1

HOLIDAY

OPEN-1

÷ You can delete file one by one by selecting in Program

WHIHE-1

HOLIDAY

INTORO-1

window and pressing CLEAR key on the remote.

ALL CLEAR

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD menu language code list

Set Up functions

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Code No.

Language

Code No.

Language

Code No.

Language

8076

8083

8084

8185

8277

8279

8285

8365

8368

8372

8373

8375

8376

8377

8378

8379

8381

8382

8385

8386

8387

8465

8469

8471

8472

8473

8475

8476

8479

8482

8484

8487

8575

8582

8590

8673

8679

8779

8872

8979

9072

9085

Polish

6565

6566

6570

6577

6582

6583

6588

6590

6665

6669

6671

6672

6678

6679

6682

6765

6779

6783

6789

6865

6869

6890

6976

6978

6979

6983

6984

6985

7065

7073

7074

7079

7082

7089

7165

7168

7176

7178

7185

7265

7273

Afar

7282

7285

7289

7365

7378

7383

7384

7387

7465

7473

7487

7565

7575

7576

7577

7578

7579

7583

7585

7589

7665

7678

7679

7684

7686

7771

7773

7775

7776

7778

7779

7782

7783

7784

7789

7865

7869

7876

7879

7982

8065

Croatian

Pashto; Pushto

Portuguese

Quechua

Rhaeto-Romance

Romanian

Russian

Sanskrit

Sindhi

Serbo-Croatian

Singhalese

Slovak

Slovenian

Samoan

Shona

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bengali; Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Hungarian

Armenian

Interlingua

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Geogian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Somali

Albanian

Serbian

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Tonga

Turkish

Tatar

Twi

Ukrainian

Urdu

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faroese

French

Frisian

Irish

Latin

Lingala

Operations

Laothian

Lithuanian

Latvian; Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Nowegian

Oriya

Punjabi

Uzbek

Vietnamese

Volapük

Wolof

Xhosa

Yoruda

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Chinese

Zulu

Hindi

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press the DISC 4 key and the 4key at the same time.

In case of difficulty

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the

table below to see if the problem can be corrected before seeking help from your dealer or service representative.

Operation to reset

1 In Power ON condition, keep the DISC 3 key and the 4

The microprocessor may fall into malfunction (impos-

sibility to operate erroneous display, etc.) when the

power cord is unplugged while power is ON or due to

an external factor. In this case, execute the following

procedure to reset the microprocessor and return it to

normal condition.

(Skip) key pressed at the same time.

2 When both keys are pressed, the region code of the

unit, the software version, etc. will be displayed on the

display. (When nothing is done, the display of this infor-

mation continues.) Example: 72. 14.02:05

"BYE" will be shown on the display.

4 Press the POWER ON/OFF switch to go to Power OFF.

5 When Power ON is performed with the POWER ON/OFF

switch, the settings become the default factory settings.

÷ Please note that resetting the microprocessor clears the

contents stored in, it returns the microprocessor to the con-

dition when it left the factory.

DVD player unit

Symptom

Cause

Remedy

There is no disc in the player.

There are no signals recorded on the side of

the disc being played.

Load a disc and press the 6key.

Turn the disc over and properly place it on

the disc tray.

Playback does not start when the 6key is

pressed.

The TV is not turned on.

The connection cords are not properly con-

nected.

Turn on the TV.

Properly reconnect the connection cords.

Playbackstartsbutnoimage/soundisseen/

heard.

The picture is slightly disrupted during fast

forward and fast reverse operations.

This is not a malfunction.

The picture is disrupted when the image is

fast forwarded or fast reversed.

The audio output cords are not properly con-

nected.

The volume control of the TV or amplifier is

not adjusted properly.

Properly connect the audio cords.

No sound is heard.

Set the sound volume to an appropriate

level.

Press the 6 key to resume normal play-

The player is in a special playback mode.

back mode.

A nearby device is generating noise.

The disc is dirty.

Separate this unit as far as possible from

the device you think is generating the

noise.

Refer to the "Disc handling precautions"

section and wipe dirt from the disc. 0

Use a new disc.

The picture does not look good or the pic-

ture/sound quality is poor.

The disc is damaged.

There is condensation on the optical lens.

Refer to the "Caution on condensation" sec-

tion and evaporate the condensation.

Time is required for the unit to detect the

disc type and size and for the rotation of the

motor to stabilize. This is not a malfunction.

Approximately 10 to 20 seconds are re-

quired for a disc to start playing, although

the time differs depending on the disc.

It takes a while for the disc to start playing.

The tray opens automatically.

The disc is not placed horizontally.

Properly place the disc on the tray.

The video format of the disc being played

does not match that of the connected TV

monitor.

Refer to the "Video formats" section ,and

use a disc with the appropriate video for-

mat for your TV or a TV with the appropriate

The top and bottom of the screen cannot be

seen.

video format for the disc.

The DVD disc being played does not contain

the recording of subtitles.

The subtitle cannot be displayed when the

DVD disc being played does not contain

the recording of subtitles.

The subtitle is not displayed.

The subtitle mode is set to off.

Press the SUBTITLE ON/OFF key to

switch on the subtitle mode.

The DVD disc being played does not contain

the recording of more than one audio (or sub-

title) language.

The voice (or subtitle) language cannot be

changed when the DVD disc being played

does not contain the recording of more

than one voice (or subtitle) language.

The voice (or subtitle) language cannot be

changed.

The DVD disc being played does not contain

the recording of more than one angle.

The viewing angle cannot be changed

when the DVD disc being played does not

contain the recording of more than one

angle.

More than one viewing angle may be re-

corded only in limited sections in a disc.

The viewing angle cannot be changed.

You are attempting to switch the angle in a

DVD section where more than one angle is

not recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

In case of difficulty

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

DVD player unit

Symptom

Cause

Remedy

A viewing restriction (RATING) has been set

for the disc.

Check the viewing restriction level (RAT-

ING) setting.

Playback will not start even after a title is se-

lected.

You have forgotten the viewing restriction

(RATING) password.

Set the initial setup to the factory setup

with the following procedure.

In Power ON condition, keep the DISC 3 key and

the 4(Skip) key pressed at the same time.

The viewing restriction level (RATING) can-

not be changed.

2 When both keys are pressed, the region

code of the unit, the software version,

etc. will be displayed on the display.

(When nothing is done, the display of this

information continues.)

3 Press the DISC 4 key and the 4 key at

the same time. "BYE" will be shown on the

display.

4 Press the POWER ON/OFF switch to go to

Power OFF.

When Power ON is performed with the

POWER ON/OFF switch, the settings be-

come the default factory settings.

The DVD disc being played does not contain

the recording of the selected voice or subtitle

language.

Use a DVD disc containing the recording of

the selected voice or subtitle language.

Thevoiceorsubtitlelanguageselectedinthe

initial setting is not played.

The function for displaying message on the TV

screen (On-Screen Messages) is set to off.

Set On-Screen Messages to on.

No message appears on the TV screen after

a key is pressed.

The menu language function (MENU) is not

set.

Set the disc menu language function

(MENU) as required.

Menu screen messages are not shown in the

desired language.

DVD disc cannot be played when the se-

quential mode of the player is set to "SEQ.2".

Switch it to "SEQ.1".

DVD disc cannot be played.

Menu playback is not available when P.B.C.

is Off or the sequential play mode of the

player is set to "SEQ.2".

P.B.C.-compatibleVCDcannotbeplayedwith

menu playback.

Switch it to P.B.C. On or "SEQ.1".

*‡

Remote control unit

Symptom

Cause

Remedy

Batteries are exhausted.

Replace with new batteries.

Operate the unit inside the remote control-

lable range.

Remote control operation is not possible.

The remote control is too far away from the

system, the controlling angle is deviated or

there is an obstacle in between.

Inhibition icon

Symptom

Cause

Remedy

The inhibition icon is displayed

and remote control is not pos-

sible.

Playback is restricted intentionally by the

software producer.

The operation is inhibited. Please try an-

other operation.

Knowledge

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,

4,819,098and4,907,093licensedforlimitedviewingusesonly.

Manufactured under license from Dolby Laboratories.

"Dolby"andthedouble-DsymbolaretrademarksofDolby

Laboratories.

This product incorporates copyright protection technology

thatisprotectedbymethodclaimsofcertainU.S.patentsand

otherintellectualpropertyrightsownedbyMacrovisionCor-

poration and other rights owners. Use of this copyright pro-

tection technology must be authorized by Macrovision Cor-

poration,andisintendedforhomeandotherlimitedviewing

uses only unless otherwise authorized by Macrovision Cor-

poration. Reverse engineering or disassembly is prohibited.

"DTS"and"DTSDigitalOut"aretrade-

marksofDigitalTheaterSystems,Inc.

[ For U.S.A. and Canada ]

Consumers should note that not all high definition televi-

sion sets are fully compatible with this product and may

causeartifactstobedisplayedinthepicture. Incaseof525

progressivescanpictureproblems,itisrecommendedthat

the user switch the connection to the "STANDARD DEFI-

NITION"output.IftherearequestionsregardingourTVset

compatibility with this model 525p DVD player, please

contact our customer service center.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

[Type]

[General]

System .................................... DVD video player system

Signal read system ......................... Semiconductor laser

Power consumption .................................................. 20 W

Dimensions .................................. W : 440 mm (17-5/16”)

....................................................... H : 127 mm (5”)

....................................................... D : 432 mm (17)

Weight (net)............................................... 7.0 kg (15.4 lb)

[D/A Conversion Section]

D/A conversion ........................................................ 24 Bit

Oversampling ... 8 fs (Sampling frequency; 44.1, 48 kHz)

......................... 4 fs (Sampling frequency; 96 kHz)

[Audio section]

Frequency response

Sampling frequency ; 44.1 kHz ............ 4 Hz ~ 20 kHz

Sampling frequency ; 48 kHz ............... 4 Hz ~ 22 kHz

Sampling frequency ; 96 kHz ............... 4 Hz ~ 42 kHz

Signal to noise ratio .............................. More than 98 dB

Dynamic range ....................................... More than 95 dB

Total harmonic distortion ...... Less than 0.005 % (1 kHz)

Channel separation ................... More than 95 dB (1 kHz)

Wow and flutter ........................ Below measurable limit

Analog output level/impedance ...................... 2 V / 1 kΩ

Digital output level/impedance

COAXIAL.............................................. 0.5 Vp-p / 75 Ω

OPTICAL ..... -21 dBm ~ -15 dBm (Wave length 660 nm)

[Video Section]

Video output format

(For U.S.A., Canada and U.S. Military)

......................................................................... NTSC

(For other countries)

................................................................. NTSC/PAL

Video compression

DVD ................................................................... MPEG-2

Composite video output level

......................... 1 Vp-p (75 Ω load, sync. negative)

S-video output level

(Y-signal) .............. 1 Vp-p (75 Ω load, sync. negative)

(C-signal)

NTSC ........................................... 0.286 Vp-p (75 Ω)

PAL .............................................. 0.300 Vp-p (75 Ω)

Horizontal resolution........................ More than 480 lines

Video signal to noise ratio .................... More than 60 dB

KENWOODfollowsapolicyofcontinuousadvancementsindevelopment.Forthisreasonspecificationsmay

be changed without notice.

NNootteess

÷ Sufficient performance may not be exhibited at extremely cold locations (Where water freezes).

Download from Www.Somanuals.com. All Manuals Search And Download.

DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)

Knowledge

Download from Www.Somanuals.com. All Manuals Search And Download.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below. Refer

to the model and serial numbers whenever you call upon your dealer for

information or service on this product.

Model

Serial Number

Download from Www.Somanuals.com. All Manuals Search And Download.

IOGear Network Card GPS702e3W6 User Manual
JBL Portable Speaker EVO1324 User Manual
JBL Speaker K2 S5800 User Manual
John Deere Portable Generator PR G3200M User Manual
JVC DVD VCR Combo HR XVC33UM User Manual
JVC DVR Video Recording User Manual
Kenmore Refrigerator WI0151336A User Manual
Kettler Marine Sanitation System 7937 700 User Manual
Kidde Smoke Alarm KN COP DP LS User Manual
Kodak Camera Lens KAF 4320 User Manual