Kenwood DVD Player DVF 3400 User Manual

DVD/VCD/CD PLAYER  
DVF-3400  
INSTRUCTION MANUAL  
B60-5680-08/00 (K, E, X) KW  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Caution: Read this page carefully to ensure safe operation.  
Read Instructions – All the safety and operating instructions  
should be read before the product is operated.  
Retain Instructions – The safety and operating instructions should  
be retained for future reference.  
12.Servicing – Do not attempt to service this product yourself  
as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service  
personnel.  
Heed Warnings – All warnings on the product and in the operating  
instructions should be adhered to.  
Follow Instructions – All operating and use instructions should be  
followed.  
13.Damage Requiring Service – Unplug this product from the  
wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
a) When the power-supply cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the  
product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the  
operating instructions.  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance  
– this indicates a need for service.  
1. Cleaning – Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
2. Attachments – Do not use attachments not recommended by  
the product manufacturer as they may cause hazards.  
3. Water and Moisture – This product shall not be exposed to  
dripping and splashing – for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet basement; or near a  
swimming pool; and the like. Do not place an object containing  
liquid, such as a flower vase, on the appliance.  
g) If an abnormal smell or smoke is detected.  
14.Replacement Parts – When replacement parts are required, be  
sure the service technician has used replacement parts specified by  
the manufacturer or have the same characteristics as the original  
part. Unauthorized substitutions may result in fire, electric shock, or  
other hazards.  
4. Accessories – Do not place this product on an  
unstable cart, stand, tripod, bracket, or table. The  
product may fall, causing serious injury to a child  
or adult, and serious damage to the product.  
Use only with a cart, stand, tripod, bracket, or  
table recommended by the manufacturer. Any mounting of  
the product should follow the manufacturer’s instructions,  
and should use a mounting accessory recommended by the  
manufacturer. A product and cart combination should be moved  
with care. Quick stops, excessive force, and uneven surfaces may  
cause the product and cart combination to overturn.  
15.Safety Check – Upon completion of any service or repairs to  
this product, ask the service technician to perform safety checks  
to determine that the product is in proper operating condition.  
16.Wall or Ceiling Mounting – This product should be mounted  
to a wall or ceiling only as recommended by the manufacturer.  
17.Heat – This product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products that  
produce heat. Do not place a flaming object, such as a candle  
or lantern, or near the product.  
5. Ventilation – Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the product and  
to protect it from overheating, and these openings must not be  
blocked or covered. The openings should never be blocked by  
placing the product on a bed, sofa, rug, or other similar surface.  
This product should not be placed in a built-in installation such  
as a bookcase or rack unless proper ventilation is provided or  
the manufacturer’s instructions have been adhered to.  
18.Power Lines – An outside antenna system should not be  
located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system, extreme  
care should be taken to keep from touching such power lines or  
circuits as contact with them might be fatal.  
6. Power Sources This product should be operated only from the  
type of power source indicated on the product. If you are not sure of  
the type of power supply to your home, consult your product dealer  
or local power company.  
19.Outdoor Antenna Grounding – If an outside antenna or cable  
system is connected to the product, be sure the antenna or  
cable system is grounded so as to provide some protection  
against voltage surges and built-up static charges. Article  
810 of the National Electrical Code, ANSI/NFPA 70, provides  
information with regard to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire to an  
antenna discharge unit, size of grounding conductors, location  
of antenna-discharge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
CAUTIONPolarization –  
7.  
This product may be equipped  
with a polarized alternating-current line plug (a plug having one  
blade wider than the other). This plug will fit into the power outlet  
only one way. This is a safety feature. If you are unable to insert the  
plug fully into the outlet, try reversing the plug. If the plug should  
still fail to fit, contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the polarized plug.  
8. Power Cord Protection – Power-supply cords should be routed  
so that they are not likely to be walked on or pinched by items  
placed upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point where  
they exit from the product.  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN WIR  
E
GROUND CLAMPS  
9. Lightning – For added protection for this product during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line surges.  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
10.Overloading – Do not overload wall outlets, extension cords,  
or integral convenience receptacles as this can result in a risk of  
fire or electric shock.  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC – NATIONAL ELECTRICAL CODE  
11.Object and Liquid Entry – Never push objects of any kind into  
this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
Notes:  
1. Item 7 is not required except for grounded or polarized  
equipment.  
2. Item 19 complies with UL in the U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3
Before applying power  
Accessories  
Check that all accessories are present in the package.  
Audio cord (Red, White) Video cord (Yellow)  
Coaxial cable (Black)  
(x 1)  
Remote control unit  
(RC-D0314 x 1)  
Remote control batteries  
(R03 x 2)  
(x 1)  
(x 1)  
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you  
directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you  
need to move or ship the unit in the future.  
Keep this manual handy for future reference.  
For the U.S.A.  
CAUTION:  
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation expo-  
sure. In compliance with Federal Regulations, the following are reproductions of labels on, or inside the product relating to laser prod-  
uct safety.  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-CHO,  
HACHIOJI-SHI,  
TOKYO, JAPAN  
KENWOOD CORP. CERTIFIES THIS EQUIPMENT  
CONFORMS TO DHHS REGULATIONS NO. 21 CFR  
1040.10, CHAPTER 1, SUBCHAPTER J.  
Location: Back Panel  
For the U.S.A.  
FCC WARNING  
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interfer-  
ence unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equip-  
ment if an unauthorized change or modification is made.  
NOTE:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment  
may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
– – Reorient or relocate the receiving antenna.  
– – Increase the separation between the equipment and receiver.  
– – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
– – Consult the dealer or an experienced radio / TV technician for help.  
For Canada  
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4
Special features  
• Higher video quality than S-VHS video and LaserDisc  
• Higher audio quality than music CD  
• Graphical User Interface (G.U.I.)  
®
• MPEG1 , MPEG2 files, DivX video playback  
• MP3, WMA and JPEG files playback  
This document classifies the applications of each feature using the following marks.  
: Description of a feature that can be used with audio CD (CD-DA).  
: Description of a feature that can be used with DVD video.  
: Description of a feature that can be used with VCD.  
: Description of a feature that can be used with DivX®video.  
: Description of a feature that can be used with JPEG.  
: Description of a feature that can be used with MP3.  
: Description of a feature that can be used with WMA.  
Contents  
To ensure safety, read the items carrying this marking carefully.  
Before applying power................................... 2  
IMPORTANT SAFETY INSTRUCTIONS ............ 3  
Accessories................................................................................4  
Special features .......................................................................5  
Contents.....................................................................................5  
Operations  
Basic playback of disc ........................................ 22  
On screen display................................................................. 22  
Last Scene Memory............................................................. 22  
Basic play................................................................................. 23  
Disc playback features ....................................................... 24  
Repeat play.............................................................................................. 24  
A-B Repeat play .................................................................... 25  
Program play ......................................................................... 25  
Discs information ................................................. 6  
Types of playable discs .........................................................6  
Unplayable discs .....................................................................6  
Region Codes........................................................ 7  
Region codes in the world...................................................7  
Icons on the DVD VIDEO discs............................................7  
Playable files with this unit ................................. 8  
File Specifications...................................................................8  
Creating media for playing back on this equipment...8  
Video formats ....................................................... 9  
For Your Information ......................................... 10  
Movie disc playback........................................... 26  
..................................................... 27  
Select Audio Language  
Select the Audio channel  
.................................................. 27  
.......................................................................... 27  
Using Marker  
........................................................... 28  
Select Camera angle  
Select Subtitle Language  
Zoom function  
............................................................................ 29  
.................................................... 28  
...................................................................... 28  
Time Search  
Music disc playback ........................................... 30  
Preparation  
.......................... 30  
Using the TV screen to start playback  
............................................. 30  
Connections........................................................ 11  
Playback from desired track  
......................................................... 30  
To display the ID3 tag  
.......................................................................... 30  
Controls and Indicators ..................................... 14  
Main unit................................................................................. 14  
Remote control unit............................................................ 14  
Random play  
Photo files playback (JPEG files only)............... 31  
.................................................................. 31  
To start playback  
Zoom function  
Set Up functions ................................................. 16  
Preparation for Set Up ....................................................... 16  
Set up menu........................................................................... 16  
LANGUAGE ..............................................................................17  
DISPLAY ....................................................................................17  
AUDIO........................................................................................17  
LOCK (Parental Control)..................................................... 18  
OTHERS.....................................................................................19  
...................................................................... 31  
................................................................... 31  
To rotate picture  
To hide the menu bar  
......................................................... 31  
............................................................................... 31  
Slide show  
Knowledge  
Troubleshooting................................................. 32  
Specifications ..................................................... 34  
Hierarchical structure of VCD menus (P.B.C. function)  
.................................................................................................... 20  
DVD menu language code list ........................................ 21  
Area Code code list ............................................................. 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
5
Discs information  
Types of playable discs  
The system this unit is using does not only play music from CD but can also play the discs listed below to offer you high-quality enter-  
tainment of video of movies and live concerts.  
DVD VIDEO  
(DVD-R/RW, DVD+R/RW)  
Playable Disc  
CD (CD-R, CD-RW)  
VCD (SVCD*)  
Logo mark  
on disc  
Disc size  
8 cm  
One or both  
12 cm  
One or both  
8 cm  
One side only  
12 cm  
One side only  
8 cm  
One side only  
12 cm  
One side only  
Played sides  
Approx. 41 min.  
(1 side, 1 layer)  
Approx. 75 min.  
(1 side, 2 layers)  
Approx. 82 min.  
(2 sides, 1 layer)  
Approx. 150 min.  
(2 sides, 2 layers)  
Approx. 133 min.  
(1 side, 1 layer)  
Max. 20 min.  
Max. 74 min.  
Approx. 242 min.  
(1 side, 2 layers)  
Approx. 266 min.  
(2 sides, 1 layer)  
Approx. 484 min.  
(2 sides, 2 layers)  
Video +  
Audio  
(In case of an SVCD, the possible play-  
back time becomes shorter.)  
Audio  
Max. 20 min., digital Max. 80 min., digital  
Please refer to page 8 for the CD-R, CD-RW, DVD-R, and DVD-RW file formats which can be played back by this unit.  
• * This unit can play SVCDs, but some functions will not work.  
A Dual Disc is a two-sided disc combining a DVD side according to the DVD standard and a music side. The video content recorded on the  
DVD side can be played back. As the music side is not compatible with the Compact Disc (CD) standard, playback on this unit is not assured.  
This unit can play back DVD-R and DVD-RW discs recorded in the DVD VIDEO format and DVD+R and DVD+RW discs, but depending on the  
recording unit, the disc manufacturer, etc., playback sometimes may not be possible.  
This unit may also be incapable of playing certain CD-R/RW discs depending on their properties, recording conditions, etc.  
This player cannot play back discs compatible with CPRM. CPRM is the abbreviation of Content Protection for Recordable Media, and it is a  
technique for copyright protection for recording media.  
Unplayable discs  
This player cannot play back any of the following discs.  
A DVD video disc with a region code which does not match this  
unit or without a region code. For details, see "Region Codes".  
(See page 7.)  
When the video format of a disc differs from that of the TV in  
use, the disc cannot be played normally. For details, see "Video  
Formats". (See page 9.)  
DVD AUDIO discs  
DVD-RAM discs  
SACD discs  
VSD discs  
CDV discs (Only the audio part can be reproduced.)  
CD-G/CD-EG/CD-EXTRA discs (Only the audio can be repro-  
duced.)  
Restrictioonnss dduuee ttoo ddiiffffeerreennccee bbeettwweeeenn ddiissccss  
Inhibition icon  
Some DVD and VCD discs can be played only in certain playback modes according to the intentions of the software  
producers. Depending on the condition of this unit, operation may be restricted. As this player plays discs accord-  
ing to their intentions, some functions may not work as intended by you. Please be sure to read the instructions  
provided with each disc. When an inhibition icon is displayed on the TV screen connected to the player, it indicates  
that the disc being played is under the restriction as described above.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
6
Region Codes  
Every player of this model has a certain region code assigned to it based on the country where the player is used. When the player is  
used to play back DVD VIDEO discs, it can only play the DVD VIDEO discs carrying the region codes matching the region code of the  
player.  
The region code for this player is described on the rear panel of the player.  
Region codes in the world  
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.  
Professional use disc  
(Air Line cabin service)  
Reggioonn ccooddeess ooff tthhee DDVVDD VVIIDDEOO ddisscss tthhaatt ccaann bbee ppllaayyeedd wwith thiiss ppllayer  
This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player shown in the table  
above, a marking containing the region code of the player or the "ALL" marking shown below. Even when a DVD VIDEO disc does not  
carry any indication of the region code, it may sometimes unable to be played on this player due to certain restrictions.  
Icons on the DVD VIDEO discs  
Icon  
Description  
Indicates the region code where the disc can be played.  
Number of voice languages recorded with the audio function. The number in the icon indicates the number of  
voice languages. (Max. 8 languages)  
Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the number of  
subtitle languages. (Max. 32 languages)  
Number of angles provided by the angle function. The number in the icon indicates the number of angles. (Max. 9  
angles)  
Aspect ratios that can be selected. "4:3 Letter box" stands for Letter Box and "4:3 Panscan" for Pan/Scan. (See page  
17)  
In the example on the left, the 16:9 video can be converted into letter box video.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
7
Playable files with this unit  
File Specifications  
Category / Item  
Extension  
Detail  
(Audio)  
Media  
MOVIE [file size : 4GB (Max.)]  
MPEG1  
.MPG, .MPEG  
.MPG, .MPEG  
.AVI, .DIVX  
Video resolution : 720 x 576 (Max.)  
Bit Rate : 5M bps (Max.)  
Video resolution : 720 x 576 (Max.)  
Bit Rate : 5M bps (Max.)  
Video resolution : 720 x 576 (Max.)  
Bit Rate : 10M bps (Max.)  
Mpeg1 Layer1 & 2  
Mpeg1 Layer1 & 2  
MPEG2  
CD-ROM  
CD-R  
DivX® VIDEO *  
WAV, MP3, WMA  
Dolby Digital  
CD-RW  
DVD-ROM  
DVD-R  
MUSIC [file size : 4GB (Max.)]  
MPEG Audio  
WMA (ver. 7)  
WMA (ver. 8)  
.MP3  
Layer III Bit Rate 8 - 320 kbps, CBR/VBR  
FS 32k, 44.1k, 48k  
Bit Rate 48 - 320 kbps, CBR/VBR  
FS 32k, 44.1k, 48k  
Bit Rate 48 - 320 kbps, CBR/VBR  
FS 32k, 44.1k, 48k  
DVD+R  
DVD-RW  
DVD+RW  
(See page 6.)  
.WMA  
.WMA  
PHOTO [file size : 4MB (Max.)]  
JPEG .JPG, .JPEG  
Video resolution : 3072 x 2048 (Max.)  
24 bit True color  
*
Depending on the data recording condition and other factors, playback may not be possible.  
Usable formats for MP3/WMA/JPEG : ISO9660 level 1, 2 (excluding expanded formats : Joliet, Romeo)  
Official DivX® Certified product.  
Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media files.  
Creating media for playing back on this equipment  
Compressing MP3/WMA  
Please set up the transfer bit rate setting for the compression software when compressing MP3/WMA files as follow.  
MP3 Files : 128 kbps recommended (8 - 320 kbps)  
WMA Files : 128 kbps recommended (48 - 320 kbps)  
This unit is compatible with 32 kHz, 44.1 kHz (recommended) and 48 kHz sampling frequencies.  
This unit is compatible with ID3-TAG Ver. 1. (Alphanumeric sign : up to 30 characters)  
DIGITAL output of MP3/WMA data is done not as MP3/WMA data, but as PCM data.  
Naming folders and files  
Single-byte characters between A and Z, single-byte numerals between 0 and 9, and the single-byte underscore(_) can be displayed. Ensure  
that the extension log is attached to all file names.  
Never add the wrong extension log to any files, the equipment will assume that they can be played back, and this will produce loud noises  
in the speakers, resulting in damage of adverse effects.  
Note:  
Folder names and file names are displayed up to 20 characters. When folder names and file names are recorded with more than 20 characters,  
the names will be displayed in abbreviated form.  
Confirming media and files  
Check to ascertain that MP3/WMA files can be played back correctly on the personal computer in use prior to saving them onto the media.  
Check to ensure that the saved file can be played back normally.  
Example for a hierarchical  
structure  
It is not possible to confirm that files can be played back correctly while they are being saved onto the  
media.  
When saving files onto media  
Ensure that the session is closed or finalized when data has been written on media. There are cases where  
media on which the session has not be closed or finalized will not be played back correctly with this equip-  
ment.  
There are cases where the folder names and file names will not be displayed correctly depending on the  
software used to save them.  
Do not store files or folders other than playable files on media to be played back with this equipment.  
It is recommended that ten or less sessions are stored when recording MP3/WMA files onto a media.  
In case of a multisession disc, some time may be required until playback begins.  
There are cases where playback is not possible when DivX/MP3/WMA/JPEG files (CD-ROM) and music CD  
information (CD-DA) are saved on the same media.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
8
Video formats  
The TV picture display and disc signal systems can be divided  
roughly into two TV formats (NTSC and PAL).  
TV formats of major countries  
TV Format  
NTSC  
Major Countries & Areas  
Japan, Taiwan, Korea, USA, Canada, Mexico,  
Philippines, Chile, etc.  
They are variable depending on countries and areas.  
This unit has a function for changing the video format accord-  
ing to the TV type. Please confirm the type of your TV.  
China, U.K., Germany, Australia, New Zealand,  
Kuwait, Singapore, etc.  
PAL  
Checckinngg tthhee VVideeoo FFoorrmmaatt  
Check the video format of the TV to be used  
To selecctt TTVV TTyyppee  
(onlly foorr EEuuroope annd Auussttrraallia))  
When the video formats are different :  
0
Press the [ ] key to remove the disc from the  
unit, then close the tray.  
Try playing the disc. If the video formats of the disc and TV do  
not match, the played video may be black and white or become  
as shown below.  
1
2
8
Press and hold the [ ] key on the remote control  
for more than 5 seconds to be able to select a TV  
type (PAL, NTSC or AUTO).  
Top and bottom edges are not  
displayed.  
Top and bottom areas are  
dark.  
Picture turbulence due to sync  
unmatching.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
9
For Your Information  
Hannddliinngg ooff ddiisscc  
Caree aand Storaggee  
Cautioonn ffoorr TTrraannssppoorrtt oorr MMovemeentt  
is displayed.  
3
Wait a few seconds, and then switch the system OFF.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
10  
Connections  
Caution for connection  
CAUTION  
Observe the following cautions when installing the system.  
Insufficient heat radiation may build up internal heat and  
cause a malfunction or fire hazard.  
Do not plug the power cord into the power outlet until all  
other connections are completed. Before unplugging a con-  
nected cord or cable, be sure to set the power key to OFF and  
unplug the power cord from the power outlet in advance.  
÷
Do not place an object that may hinder heat radiation on the system.  
Leave the spaces specified below around the cabinets of the main unit.  
÷
Top panel: 50 cm or more  
Side panel: 10 cm or more  
Back panel: 10 cm or more  
Install the system so that the power outlet is easily accessible  
from the user, and unplug the power cord from the power  
outlet immediately in case of a trouble. Note that the power  
supply to the system is not shut down completely by simply  
setting the power key to OFF. To shut down the power supply  
completely, it is required to unplug the power cord.  
Malfunction of microcomputer  
If the system does not work properly or the display shows  
wrong information even when correct connections are made,  
reset the microcomputer referring to "Operation to reset".  
(See page 32.)  
Connneeccttiinngg ttoo aa TTVV wwiitthh vviiddeeoo ((ccoommppoossiittee)) oorr SS--vviiddeeoo iinnppuutt tteerrmmiinnaall  
Video cord  
Audio cord  
TV  
Rear panel example (for Australia)  
R
L
AUDIO  
VIDEO  
INPUT  
S VIDEO  
*S-video (Commercially available)  
(Except for Europe)  
*
Connect only either the video (composite) cord or  
the S-video cord.  
Connneeccttiinngg ttoo aa TTVV wwiitthh SSCCAARRTT iinnppuutt tteerrmmiinnaall ((FFoorr EEuurooppee))  
Refer to "TV Output Select (only for Europe)" on page 17  
TV  
Rear panel example (for Europe)  
INPUT  
SCART  
*SCART cable (Commercially available)  
Note:  
Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protec-  
tion system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
11  
Connections  
Connneeccttiinngg ttoo aa TTVV wwiitthh CCoommppoonneenntt iinnppuutt tteerrmmiinaal  
Refer to "TV Output Select (only for Europe)" on page 17.  
Video cord  
Audio cord  
TV  
Rear panel example (for Europe)  
Component cords (Commercially  
available)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
12  
Conneeccttiinngg ttoo aan Auuddioo ccoommppoonneent  
For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital connection.  
Audio cord  
Coaxial cable  
Rear panel example (for Europe)  
TV  
R
L
AUDIO  
INPUT  
VIDEO  
COAXIAL OPTICAL  
DIGITAL INPUT  
Video cable or Component cords  
(Commercially available)  
AV receiver or AV Amplifier  
Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic:  
Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo  
system, using the audio cords.  
Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital™ or  
DTS):  
Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL) to the corresponding in jack on your amplifier. Use a digital (coaxial)  
cable. Select "Bitstream" if you connect the DVD player to an amplifier or other equipment with a multi-channel decoder. (See page 17.)  
DTS disclaimer clause  
When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to  
the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an  
amplification system.  
To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digi-  
tal output (S/P DIF, AES/EBU, or TosLink) of the DVD player.  
Notes:  
In case an associated system component is connected, also read the instruction manual of the component.  
If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces a strong, distorted  
sound or no sound at all.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
13  
Controls and Indicators  
Main unit  
Display  
DVD video:  
Elapsed time of the title being played  
Audio CD, VCD, DivX, MP3:  
Elapsed time of the track (or file) being played  
At the time of audio CD stop mode:  
"STOP" displayed  
3
4
5 6  
1
7
2
£
Power key (See page 16.)  
key (See page 23.)  
1
5
6
7
Switches the unit ON and standby.  
Starts playback.  
7
Disc tray (See page 23.)  
key (See page 24.)  
2
3
Stops playback.  
0
Disc tray open/close ( ) key (See page 23.)  
Opens or closes the disc tray.  
4 ¢  
,
keys (See page 24.)  
Skips or searches (by fast forward or fast reverse) a chapter  
or track.  
Remote control sensor (See page 15.)  
4
Remote control unit  
The remote control keys with the same names as the  
keys on the main system function in the same way as  
the keys on the main system.  
1
0
!
@
Power key (See page 16.)  
1
2
3
Switches the unit ON and standby.  
2
3
TOP MENU key (See page 23.)  
Accesses menu on a DVD disc.  
5 ∞ 2 3  
keys  
,
,
,
Selects an item in the menu.  
ENTER key  
4
5
Confirms menu selection.  
RETURN key (See page 20.)  
4
5
#
$
%
Returns on a VCD with PBC.  
ZOOM key (See pages 28, 31.)  
Enlarges video image.  
6
8
key (See pages 24, 26.)  
Pauses playback temporarily/press repeatedly for frame-  
by-frame playback.  
7
8
9
^
&
SLOW  
key (See page 26.)  
Starts slow motion playback.  
7
key (See page 24.)  
Stops playback.  
Numeric keys (See pages 26, 29.)  
6
7
Selects numbered items in a menu.  
AUDIO key (See page 27.)  
Selects an audio language or an audio channel.  
SUBTITLE key (See page 28.)  
Selects a subtitle language.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
14  
REPEAT key (See page 24.)  
8
9
Repeats playback.  
A-B key (See page 25.)  
Repeats sequence from point A to point B.  
MARKER key (See page 27.)  
Marks any point during playback.  
SEARCH key (See page 27.)  
Displays Marker Search menu.  
0
OPEN/CLOSE key (See page 23.)  
0
!
@
#
Opens or closes the disc tray.  
MENU key (See page 23.)  
Accesses menu on a DVD disc.  
ON SCREEN key (See page 22.)  
Accesses On-Screen display.  
keys (See page 24.)  
Skips or searches (by fast forward or fast reverse) a chapter  
or track.  
4 ¢  
,
£
key (See page 23.)  
Starts playback.  
P. MODE key (See page 25.)  
$
%
Enter the program edit mode.  
CLEAR key (See pages 26, 27.)  
Removes a track number on the Program List or a mark on  
the Marker Search menu.  
ANGLE key (See page 28.)  
^
&
Selects a DVD camera angle.  
SETUP key (See page 16.)  
Accesses or removes the Setup menu.  
RANDOM key (See page 30.)  
Plays tracks in random order.  
Operaattiioonn  
Loadding baatterieess  
Remote sensor  
6 m (approx.)  
Remove the cover.  
1
Insert batteries.  
2
Plug the power cord of the system to a power outlet and press  
the power key on the remote control unit to turn the system  
ON. After the system is switched ON, press the desired opera-  
tion key.  
When pressing more than one remote control keys in sequence,  
leave a period of about 1 second or more between each press.  
The provided batteries are intended for use in checking opera-  
tions and their life may be shorter than usual.  
When the remote controllable distance becomes short, replace  
both of the batteries with new ones.  
The system may malfunction if the remote control sensor is ex-  
posed to direct sunlight or the light of a fluorescent lamp with  
high-frequency lighting system (inverter system, etc.). In this  
case, change the system installation to prevent malfunction.  
Insert two R03 batteries following the polarity indications.  
Close the cover.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
15  
Set Up functions  
To diissppllaayy aannd eexxiitt tthhee MMeennuu  
Preparation for Set Up  
Press [SETUP] key to display the menu. A second  
1
press of [SETUP] key will take you back to initial  
screen.  
POWER  
POWER  
To go to the next level:  
3
Press the Cursor right [ ] key.  
To go back to the previous level:  
2
Press the Cursor left [ ] key.  
Geneeraall OOppeerraattionn  
Press [SETUP] key.  
1
The Setup menu appears.  
5 ∞  
] keys to select the  
Use the Cursor up/down [  
desired option, then press the Cursor right [  
key to move to the second level.  
/
2
3
]
Press the [POWER] key to power on.  
1
The screen shows the current setting for the selected item, as  
well as alternate setting(s).  
Set Video Format according to the connected TV  
2
type. (Refer to "To select TV Type" on page 9.)  
If the video formats of the disc and TV do not match, press and  
5 ∞  
Use the Cursor up/down [ ] keys to select the  
/
3
8
hold [ ] key for more than 5 seconds to be able to select a TV  
second desired option, then press the Cursor  
type (PAL, NTSC or AUTO). (No disc inserted)  
3
right [ ] key to move to the third level.  
Note:  
When the power cord is plugged, wait for several seconds, and  
then switch the power on.  
5 ∞  
Use the Cursor up/down [ ] keys to select the  
/
4
5
desired setting, then press [ENTER] key to confirm  
your selection. Some items require additional  
steps.  
Set up menu  
By using the Setup menu, you can make various adjustments to  
items such as picture and sound.  
You can also set a language for the subtitles and the Setup  
menu, among other things. For details on each Setup menu  
item, see pages 17 to 19.  
£
Press [SETUP] key or [ ] key to exit the Setup  
menu.  
ENTER  
SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
16  
LANGUAGE  
Note:  
Once the setting for progressive scan output is entered, an image  
will only be visible on a progressive scan compatible TV or monitor.  
If you set Progressive Scan to On in error, you must reset the unit.  
TV Output Select  
Set the player's TV Output Select options according to the TV  
connection type.  
For Europe;  
RGB: When your TV is connected with the SCART jack.  
Y Cb Cr: When your TV is connected with the COMPONENT  
VIDEO jacks on the DVD player.  
Menu Language  
Select a language for the Setup menu and on-screen display.  
For Australia;  
S: When your TV is connected with the S VIDEO jack.  
Y Cb Cr: When your TV is connected with the COMPONENT  
VIDEO jacks on the DVD player.  
Disc Audio/ Disc Subtitle/ Disc Menu  
Select the language you prefer for the audio Track (disc audio),  
subtitles, and the disc menu  
Original: Refers to the original language in which the disc was  
recorded.  
Other: To select another language, press numeric keys then  
[ENTER] key to enter the corresponding digit number according  
to the language code list (See page 21.). If You enter the wrong  
Language code, press [CLEAR] key.  
DISPLAY  
AUDIO  
Each DVD disc has a variety of audio output options. Set the  
player’s AUDIO options according to the type of audio system  
you use.  
Progressive Scan  
TV Output Select  
Off  
RGB  
TV Aspect  
4:3: Select when a standard 4:3 TV is connected.  
16:9: Select when a 16:9 wide TV is connected.  
Display Mode  
Dolby Digital/ DTS/ MPEG  
Bitstream: Select "Bitstream" if you connect the DVD Player’s  
DIGITAL OUT jack to an amplifier or other equipment with a  
Dolby Digital, DTS or MPEG decoder.  
Display Mode setting works only when the TV Aspect mode is  
set to "4:3".  
Letterbox: Displays a wide picture with bands on the upper  
and lower portions of the screen.  
PCM (for Dolby Digital/ MPEG): Select when connected to a  
two-channel digital stereo amplifier. DVDs encoded in Dolby  
Digital or MPEG will be automatically down mixed to two-  
channel PCM audio.  
Panscan: Automatically displays the wide Picture on the entire  
screen and cuts off the portions that do not fit.  
Progressive Scan  
If you are using the COMPONENT VIDEO jacks, but are con-  
necting the DVD Player to a standard (analog) television, set  
Progressive Scan to "Off".  
Off (for DTS): If you select “Off'', the DTS signal is not output  
through the DIGITAL OUT jack.  
If you are using the COMPONENT VIDEO jacks for connection  
to a TV or monitor that is compatible with a progressive scan  
signal, set Progressive Scan to "On".  
When "On" is selected, the confirmation screen for switching to  
Progressive Scan appears. In case of a TV not compatible with  
Progressive Scan, the screen disappears and return to the origi-  
nal display is made after 10 seconds.  
Continued to next page  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
17  
Set Up functions  
Select a rating from 1 to 8 using the Cursor up/  
3
Sample Freq. (Frequency)  
5 ∞  
down [ ] keys.  
/
If your receiver or amplifier is NOT capable of handling 96 kHz  
signals, select 48 kHz. When this choice is made, this unit auto-  
matically converts any 96 kHz signals to 48 kHz so your system  
can decode them.  
Rating 1-8: Rating one (1) has the most restrictions and rating  
eight (8) is the least restrictive.  
Unlock  
If your receiver or amplifier is capable of handling 96 kHz sig-  
nals, select 96 kHz. When this choice is made, this unit passes  
each type of signal through without any further processing.  
Check the documentation for your amplifier to verify its capa-  
bilities.  
If you select unlock, parental control is not active and the disc  
plays in full.  
Note:  
If you set a rating for the player, all disc scenes with the same rating  
or lower are played. Higher rated scenes are not played unless an  
alternate scene is available on the disc. The alternative must have  
the same rating or a lower one. If no suitable alternative is found,  
playback stops. You must enter the 4-digit password or change the  
rating level in order to play the disc.  
When the disc prohibits 96 kHz digital output, the signal always  
is put out after down-conversion.  
DRC (Dynamic Range Control)  
With the DVD format, you can hear a program's soundtrack in  
the most accurate and realistic presentation possible, thanks to  
digital audio technology. However, you may wish to compress  
the dynamic range of the audio output (the difference between  
the loudest sounds and the quietest ones). This allows you to  
listen to a movie at a lower volume without losing clarity of  
sound. Set DRC to On for this effect.  
Press [ENTER] key to confirm your rating selec-  
tion, then press [SETUP] key to exit the menu.  
4
Password (Security Code)  
You can enter or change password.  
Select Password on the LOCK menu then press  
1
This function operates only at the time of playback of DVDs re-  
corded with Dolby Digital.  
3
the Cursor right [ ] key.  
Follow step as shown "Rating" part.  
2
2
Vocal  
"Change" or "New" is highlighted.  
Set to on only when a multi-channel karaoke DVD is playing.  
The karaoke channels on the disc mix into normal stereo sound.  
Enter the new 4-digit code, then press [ENTER]  
key. Input it again to verify.  
3
4
Press [SETUP] key to exit the menu.  
LOCK (Parental Control)  
If you forget Password  
If you forget your password you can clear using the following  
steps:  
Press [SETUP] key to display the Setup menu.  
1
Input the 6-digit number "210499" and the pass-  
2
word is cleared.  
Enter a new code as described above.  
3
Area Code  
Enter the code of the country/area whose standards were used  
to rate the DVD video disc, based on the list in the reference  
chapter.  
Rating  
Some movies contain scenes that may not be suitable for chil-  
dren to view. Many of these discs contain parental control infor-  
mation that applies to the complete disc or to certain scenes on  
the disc. Movies and scenes are rated from 1 to 8, depending on  
the country. Some discs offer more suitable scenes as an alter-  
native.  
Ratings are Area-dependent. (See page 21.)  
Select "Area Code" on the LOCK menu, then press  
1
3
the Cursor right [ ].  
Follow step as shown "Rating" part.  
2
2
3
The parental control feature allows you to block access to  
scenes below the rating you input, thereby preventing your  
children from being able to view material you believe is unsuit-  
able.  
Select the first character using the Cursor up/  
5 ∞  
down [ ] keys.  
/
3
Select "Rating" on the LOCK menu then press the  
Cursor right [ ] key.  
Shift the cursor using the Cursor right [ ] key  
and select the second character using the Cursor  
1
4
5
3
5 ∞  
up/down [ ] keys.  
/
To access the Rating, Password and Area Code  
features, you must input the 4-digit password  
you created. If you have not yet entered a pass-  
word you are prompted to do so.  
2
Press the [ENTER] key to confirm your Area code  
selection.  
Input a 4-digit password and press [ENTER] key.  
Enter it again and press [ENTER] key to verify. If  
you make a mistake before pressing [ENTER] key,  
press [CLEAR] key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
18  
The rental has been expired.  
OTHERS  
Rental Expired  
Done  
Display the authorization error.  
PBC  
Set Playback Control (PBC) to On or Off.  
Authorization Error  
On: Video CDs with PBC are played according to the PBC.  
This player is not authorized  
to play this video.  
Off: PBC is switched off and normal playback is made.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures.  
Set your preference and monitor’s ability.  
Done  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
Note:  
The B.L.E. function works NTSC system only.  
DivX(R) VOD  
You can display the DivX DRM (Digital Rights Management)  
Registration code for your unit only.  
The Registration code is used for VOD (Video-On-Demand) ser-  
vice agent. You can purchase or rent an encrypt movie file.  
DivX(R) Video On Demand  
Your registration code is : XXXXXXXX  
To learn more visit  
Done  
If you rent the DivX VOD file, it has several options of viewing  
limits as shown below.  
Display the number which you can watch the file.  
View DivX(R) VOD Rental  
This rental has 3 views left.  
Do you want to use one  
of you 3views now?  
Yes No  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
19  
Set Up functions  
Hierarchical structure of VCD  
menus (P.B.C. function)  
When an item is selected on the menu screen during playback  
of a P.B.C.-compatible VCD, another menu with more details  
items may be displayed. When a number of menus are connect-  
ed in multiple layers in this way, it is said that the menus have a  
hierarchical structure. In this structure, the desired scene can be  
reached by repeating item selections on the menu screens.  
ENTER  
RETURN  
Example for a hierarchical structure  
a: First level (menu)  
b: Second level (submenu)  
c: Third level (scenes)  
Advancing  
When an item is selected on the menu screen with the [ENTER]  
key or the numeric keys, advance is made to the next lower  
menu level. When the advance destination is the "scene" to be  
played, the contents will be played.  
When several menus (scenes) can be selected in each level,  
¢
4
screen switching is possible with the keys  
(PREV.).  
(NEXT) and  
Returning  
Each time the [RETURN] key is pressed, return is made to the  
next higher menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
20  
DVD menu language code list  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Language  
Singhalese  
Slovak  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Korean  
Kurdish  
Laothian  
Latin  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Latvian, Lettish  
Sindhi  
Area Code code list  
Area  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
Code  
ET  
FJ  
FI  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
KE  
KW  
LY  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
ZA  
KR  
Area  
Code  
AF  
AR  
AU  
AT  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
BE  
BT  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
NL  
ES  
LK  
SE  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
PT  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
RO  
EG  
SV  
LU  
Zimbabwe  
El Salvador  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
21  
Basic playback of disc  
On-Screen Display during playing DivX  
On screen display  
The on-screen Banner Display contains many playback features.  
To see the Banner Display, press [ON SCREEN] key while a disc is  
Track Number  
5 ∞  
] keys to move through  
playing. Use the Cursor up/down [  
the different features in the Banner Display. Each feature is illus-  
trated with an icon.  
/
Time search  
Audio language and Digital  
Audio Output mode  
ON SCREEN  
Subtitle language  
Note:  
Example:  
The on screen display is switched off when no operation is per-  
formed for a few seconds.  
On-Screen Display during playing DVD video  
Title Number  
Last Scene Memory  
This player memorizes last scene from the last disc that is  
viewed. The last scene remains in memory even if you remove  
the disc from the player or switch off the player. If you load a  
disc that has the scene memorized, the scene is automatically  
recalled.  
Chapter Number  
Time search  
7
If you don't want to use the Last Scene Memory, press the [  
key during stop.  
]
Audio language and Digital  
Audio Output mode  
Subtitle language  
Angle  
On-Screen Display during playing VCD  
Track Number  
(or PBC mode)  
Note:  
This player does not memorize the scene of a disc if you switch off  
the player before commencing to play the disc.  
Time search  
Audio Channel  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
22  
To starrtt ppllaaybbaacckk oof auddioo CCDD,, DDiivvXX,,  
MP3,, WWMMAA oorr JPEG files  
Basic play  
Label side  
It is not possible to play back folders and files that exceed the  
maximum limitations of the media.  
POWER  
A certain amount of time is required for the player to confirm  
the media on which DivX/MP3/WMA/JPEG files have been re-  
corded before playback will commence.  
5 ∞  
] keys to select desired  
Press Cursor up/down [  
track or file, then press the [ ] key or the [ENTER]  
key to start playback.  
/
£
Press [MENU] key to go to the next page.  
Example of MP3 menu  
File types  
POWER  
TOP MENU  
ENTER  
OPEN/CLOSE  
MENU  
MUSIC  
Example of JPEG menu  
Preview window  
Press the [POWER] key to power on.  
1
2
3
4
0
Press the [ ] key to open the tray.  
Place a disc.  
Start playback.  
To staarrtt ppllaayybacck oof DDVVDD vviddeeoo,, aauu--  
diio CDD or VCCDD  
When JPEG files are displayed, the display is switched automati-  
cally from one file to the next. (Slide Show )  
When different file types like music, photo, and movie files are  
mixed on one disc, press the [TOP MENU] key and select the file  
type (music, photo, movie; see page 8.) to be played back.  
£
Press the [ ] key.  
Elapsed time of the title, track or file display  
Notes:  
After all files of a folder have been played, playback will stop.  
If you are in a file list on the MP3/WMA menu and want to return  
5 ∞  
to the folder list, use Cursor up/down [  
/
] keys to highlight  
and press [ENTER] key.  
£
When [ ] key is pressed while a tray is open, the tray closes  
automatically, and then playback begins  
Note:  
When a Disc Menu appears on the screen  
In case of interactive DVDs, a Disc Menu appears on the screen.  
Then press [ENTER] key to select specific menu you want to play by  
using Cursor keys.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
23  
Basic playback of disc  
Seearching  
Disc playback features  
4
¢
] or [ ] key for  
During playback, press the [  
more than 2 seconds to select the searching speed,  
then release the key.  
4
¢
] key switches the searching  
Each press and hold the [  
speed.  
] or [  
At the time of DVD video or DivX playback  
#
(Normal speed)  
1
2
3
4
5
##  
###  
####  
#####  
At the time of VCD playback  
#
(Normal speed)  
1
2
3
4
##  
###  
####  
At the time of audio CD, MP3 or WMA playback  
#
(Normal speed)  
1
2
3
4
##  
##  
##  
x 2  
x 4  
x 8  
Notes:  
You won't hear the sound (audio) on the DVD, VCD and DivX  
when you're using the Skip, Search, Step or Slow motion fea-  
tures.  
£
Press the [ ] key at any time to resume normal playback.  
Playback features are not available during the opening credits of  
a movie.  
Repeat play  
To stop playback  
Desired title, chapter, track or disc can be played back repeat-  
edly.  
7
Press the [ ] key.  
REPEAT  
To pause playback  
8
Press the [ ] key.  
During playback, press the [REPEAT] key.  
Repeat icon  
Each press pauses and plays the disc alternately.  
During DVD playback, step operation is performed each time  
this key is pressed. (See page 26.)  
Each press switches the selection.  
At the time of DVD video playback  
Skipping chapters, tracks or files  
"Chapter"  
1
2
3
"Title"  
"Off" (Repeat off)  
4
¢
] key.  
At the time of audio CD, VCD, DivX, MP3 or WMA playback  
Press the [  
] or [  
"Track"  
1
2
3
The chapter (or track) in the direction of the key pressed is  
skipped, and the selected chapter (or track) will be played from  
the beginning.  
4
When the [ ] key is pressed once during playback, the chap-  
ter (or track) being played will be played from the beginning.  
"All"  
Goes off (Repeat off)  
To cancel repeat playback, press the [REPEAT] key and select  
"Off".  
4
When the [  
] key is pressed within 3 seconds after the start  
of chapter (or track) playback, playback starts from the start of  
the preceding chapter (or track).  
Notes:  
If you press [  
playback, the repeat playback cancels.  
¢
] once during Repeat Chapter or Repeat Track  
Note:  
P.B.C. on mode of VCD, the Repeat play function does not work.  
The Chapter feature won't work if the disc isn't formatted with  
separate chapters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
24  
A-B Repeat play  
Program play  
The A-B repeat function lets you mark a segment to repeat  
between the beginning "A" and the end "B" of the segment you  
want to replay.  
You can listen to the desired tracks of the current CD, MP3 or  
WMA in any desired order.  
ENTER  
A-B  
P. MODE  
CLEAR  
REPEAT  
Press the [A-B] key when you want to choose a  
1
scene (sound) as the beginning point.  
Repeat A icon  
Prooggrraamm EEddiitt  
"A" display appears.  
Press the [A-B] key again to choose a scene (sound)  
as the end point.  
2
Insert a disc and close the tray.  
Audio CD or MUSIC menu appears.  
1
Repeat A-B icon  
Press the [P. MODE] key.  
2
The  
mark will appear to the right of the word "Program" on  
the right side of the menu screen.  
"A-B" display appears and the repeat sequence begins.  
To cancel A-B Repeat playback, press the [A-B] key.  
Example of Audio CD menu  
mark  
"List"  
"Program"  
To exit the Program Edit mode, press the [P. MODE] key again.  
Select a specific track on the "List" by press-  
3
5 ∞  
] keys, then press the  
ing Cursor up/down [  
[ENTER] key to place the selected track on the  
"Program" list.  
/
You can select maximum 30 values by repeating  
4
5
step  
.
3
Select the track you want to start playing on the  
5 ∞  
]
Program list by pressing Cursor up/down [  
keys.  
/
£
Press the [ ] key to start.  
6
Playback begins in the order in which you programmed tracks.  
Playback stops after all of the tracks on the Program list have  
played once.  
7
The unit stops when the [ ] key is pressed. To restart program  
£
play, press the [ ] key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
25  
Basic playback of disc  
Movie disc playback  
To reepeeaatt pprrooggrraamm ppllaay  
During program playback, press the [REPEAT] key.  
Each press switches the selection.  
"TRACK" : repeats the current track or file.  
"ALL" : repeats all the tracks (files) on programmed list.  
Goes off (repeat off)  
1
2
3
ON SCREEN  
SLOW  
Note:  
If you press [  
playback cancels.  
Numeric keys  
¢
] once during Repeat Track playback, the repeat  
Delettee aa ttrraackk ffrrom Prooggrraamm llisstt  
During stop mode, press [P. MODE] and the  
mark will appear.  
1
STEP (freeze frame and frame ad-  
vance)  
2 35 ∞  
] keys to select the  
Press the Cursor [  
track that you wish to delete from the Program  
list.  
/
/
/
2
3
8
During playback, press the [ ] key.  
Press the [CLEAR] key.  
Each time you press the key, the picture advances one frame.  
£
Press the [ ] key to resume normal playback.  
Delettee tthhee ccompllette Proggram liisstt  
Slow motion playback  
During stop mode, press [P. MODE] and the  
mark will appear.  
1
During playback, press the [SLOW ] key.  
Select "Clear All", then press the [ENTER] key.  
2
The complete program for the disc is deleted.  
The programs are also cleared when the disc is removed.  
Each press switches the motion speed.  
(Slow Reverse is not possible)  
1/7  
1/6  
1/4  
1/2  
1
2
3
4
£
Press the [ ] key to resume normal playback.  
Playback from desired title, chapter  
or track  
Because DVD video discs use digital technology, a title can be  
divided into individual chapters (similar to tracks on a CD).  
At the time of DVD video playback  
Press the [ON SCREEN] key.  
1
5 ∞  
] keys to select the  
Press the Cursor up/down [  
title or chapter icon.  
/
2
Title Number  
Chapter Number  
£
Press the numeric keys, then press the [ ] key.  
3
£
To select track No. 23: 2, 3 and  
Note:  
The Chapter feature won't work if the disc isn't formatted with  
separate chapters.  
Continued to next page  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
26  
At the time of VCD playback  
Using Marker  
£
Press the numeric keys, then press the [ ] key.  
The marker feature lets you mark a point on the disc that you  
can go to quickly. You can store up to 9 marker points  
£
To select track No. 23: 2, 3 and  
Note:  
P.B.C. on mode of VCD, the Selecting a Track function may not  
work. (See page 20.)  
ENTER  
CLEAR  
Select Audio Language  
If the disc was created with different language tracks, you can  
use the [AUDIO] key to temporarily change the DVD player’s Au-  
dio setting.  
MARKER  
SEARCH  
AUDIO  
Createe tthhee MMaarkkeer  
When you reach the scene you want to mark, press  
[MARKER] key.  
Marker icon  
During playback, press the [AUDIO] key.  
The language is switched each time the [AUDIO] key is pressed.  
The marker icon appears on the TV screen briefly.  
Repeat to enter up to 9 marker points.  
DVD Audio language icon  
DivX Audio language icon  
To reeccaallll oorr ccleaarr aa mmarrkkeedd ssceenne  
During playback, press the [SEARCH] key.  
1
Marker search icon  
Notes:  
The language feature only works if the disc was created with  
multiple audio tracks.  
The marker search menu appears on the screen.  
When you chose an audio language by the [AUDIO] key, you  
only override the audio language setting in the DVD Player's  
main menu (in the Language Preferences menu within Setup  
menu) temporarily.  
2 3  
] keys to  
Press the Cursor right/left [  
select a marker number that you want to  
recall or clear.  
/
2
Press the [ENTER] key to playback from the  
marked scene or press the [CLEAR] key to  
clear the selected number.  
3
Select the Audio channel  
You can choose to play back only the right or the left channel of  
audio recorded on the disc, or you can select stereo playback.  
Notes:  
Depending on the disc, the marker function may not work.  
P.B.C. on mode of VCD, the marker function does not work. (See  
page 20.)  
The marker points are cleared each time a disc is removed from  
the player or when the power is turned off.  
AUDIO  
During VCD playback, press the [AUDIO] key.  
Audio channel icon  
Each press switches the selection.  
LEFT  
RIGHT  
STEREO  
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
27  
Movie disc playback  
Notes:  
Select Camera angle  
The subtitle feature only works if the disc was created with mul-  
tiple subtitle tracks.  
The subtitle menu of the disc appears in some discs.  
The subtitle file of the DivX file is displayed only srt, txt, smi, ssa  
and sub.  
If there is no information or there is a code that can not read in  
the DivX file, " 1 " etc are displayed.  
Some disc contains multiple angles particular scene or se-  
quence. If the disc only has one angle, this feature won’t work.  
When you are playing a DVD disc contains scenes recorded dif-  
ferent camera angles, the angle indicator will blink on the TV  
screen.  
Notice for displaying the DivX subtitle  
If the subtitle does not display properly, please follow the steps  
below.  
8
Press the [ ] key when the subtitle appears.  
Press and hold [SUBTITLE] key for about 3 seconds. The lan-  
guage code will appear.  
1
2
ANGLE  
2 3  
Press the Cursor right/left [  
guage code until the subtitle is displayed properly.  
/
] keys to select another lan-  
3
4
£
Press the [ ] key to continue playback.  
During the angle indicator has blinked, press the  
1
[ANGLE] key.  
Zoom function  
Angle icon  
Use zoom to enlarge the video image.  
ZOOM  
CLEAR  
Select the Camera angle with press the [ANGLE]  
2
key.  
During playback, press the [ZOOM] key.  
1
The square frame appears briefly in the right bottom of the pic-  
ture.  
Each press switches the selection.  
200 % size  
400 % size  
900 % size  
normal size  
1
2
3
4
2 35 ∞  
] keys to move  
Press the Cursor [  
through the zoomed picture.  
/
/
/
Select Subtitle Language  
2
You can change the Subtitle language while you’re watching a  
disc (but only if the disc was created with subtitles).  
To resume normal playback, press [ZOOM] or [CLEAR] key re-  
peatedly.  
Note:  
Zoom may not work on some DVDs.  
SUBTITLE  
During playback, press the [SUBTITLE] key.  
The language is switched each time the [SUBTITLE] key is pressed.  
Subtitle language icon  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
28  
Time Search  
To start playing at any chosen time on the disc.  
ENTER  
ON SCREEN  
CLEAR  
Numeric keys  
During playback, press the [ON SCREEN] key.  
1
2
5 ∞  
Press Cursor up/down [ ] keys to select the  
time clock icon.  
/
Time clock icon  
"--:--:--" appears.  
Press Numeric keys to input the required start  
time in hours, minutes and seconds from left to  
right.  
3
If you enter the wrong numbers, press [CLEAR] to remove the  
numbers you entered. Then input the correct numbers.  
Press the [ENTER] key to confirm.  
4
Playback starts from the selected time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
29  
Music disc playback  
To display the ID3 tag  
When playing a file containing information such as track titles,  
you can see the information by pressing [ON SCREEN] key.  
Press the [ON SCREEN] key to display the ID3 tag.  
Song, Artist, Album, Comment and Genre display appears on  
the TV screen.  
ON SCREEN  
Each press switches the selection.  
Song  
1
2
3
4
5
6
Artist  
Numeric keys  
AUDIO  
Album  
Comment  
Genre  
RANDOM  
REPEAT  
(File name)  
If there is no information, "No ID3 Tag Info" appear on the dis-  
play.  
Using the TV screen to start  
playback  
Random play  
The tracks of the disc are played in random order.  
Once you insert an audio CD , MP3 or WMA disc a menu appears  
on the TV screen.  
During playback, press the [RANDOM] key.  
The Random Play display appears on the TV screen.  
Each time you press [RANDOM] key, random play would be on  
and off.  
Audio CD menu  
¢
By pressing [ ] key during random playback, the unit selects  
another track and resumes random playback.  
To caancell rraannddom ppllay  
7
Press the [ ] key to stop playback.  
1
Press the [RANDOM] key to cancel random play-  
back.  
2
MP3/WMA menu  
To reeppeeaatt rraannddoomm ppllaay  
During random playback, press the [REPEAT] key.  
Each press switches the selection.  
"TRACK"  
1
2
3
"ALL"  
Goes off (repeat off)  
5 ∞  
] keys to select a track  
Press the Cursor up/down [  
then press [ ] or [ENTER] and playback starts.  
/
£
Note:  
After all tracks of a disc have been played in random order, play-  
back will stop.  
Playback from desired track  
£
Press the numeric keys, then press [ ] key.  
£
To select track No. 23: 2, 3 and  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
30  
Photo files playback (JPEG files only)  
To rotate picture  
5 ∞  
] keys to rotate the  
Press the Cursor up/down [  
picture clockwise or counter clockwise.  
/
RETURN  
ZOOM  
ENTER  
To hide the menu bar  
Press the [RETURN] keys to hide the menu bar.  
To start playback  
Once you insert an audio JPEG disc a menu appears on the TV  
screen.  
Hide  
Menu bar  
Switching between display and no display is done each time the  
[RETURN] key is pressed.  
5 ∞  
] keys to select a  
Press the Cursor up/down [  
folder then press the [ENTER] key.  
/
1
2
A list of files in the folder appears. If you are in a  
file list and want to return to the previous Folder  
Slide show  
The Slide show function can be used to switch photo images  
automatically from one file to the next.  
5 ∞  
list, use the Cursor up/down [ ] keys to high-  
/
light and press the [ENTER] key.  
£
Select desired file, then press the [ ] or [ENTER]  
key.  
3
There are 3 Slide speed options.  
Insert a disc and close the tray.  
1
2 35 ∞  
] keys to highlight the  
Press Cursor [  
/
/
/
2
speed icon (  
).  
Preview window  
Go to step if the slide speed is not to be changed.  
4
2 3  
] keys to select the  
Press Cursor left/right [  
option you want to use then press the [ENTER]  
key.  
/
3
Each press switches the selection.  
Zoom function  
Use zoom to enlarge the photo image.  
>>> : Fast  
1
2
3
>> : Normal  
>
: Slow  
During playback, press the [ZOOM] key.  
The square frame appears briefly in the right bottom of the pic-  
ture.  
1
5 ∞  
Press Cursor up/down [ ] keys to select the  
/
4
icon and then press the [ENTER] key.  
Playback starts.  
Each press switches the selection.  
200 % size  
400 % size  
900 % size  
normal size  
1
2
3
4
2 35 ∞  
] keys to move  
Press the Cursor [  
through the zoomed picture.  
/
/
/
2
To resume normal playback, press [ZOOM] or [CLEAR] key re-  
peatedly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
31  
Troubleshooting  
Troubles are not always due to malfunction or failure of the system. In case of a trouble, check the following tales before calling for ser-  
vice.  
Operation to reset  
The microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power cord is unplugged  
while power is ON or due to an external factor.  
In this case, switch off the power, wait for several seconds, and then switch the power on again.  
DVD player unit  
Symptom  
Remedy  
The system cannot be switched ON.  
When the power cord is plugged, wait for several seconds, and then switch the  
power on.  
£
£
Playback does not start when the [  
key is pressed.  
]
Load a disc and press the [ ] key.  
There are no signals recorded on the side of the disc being played. Turn the disc  
over and properly place it on the disc tray.  
Playback starts but no image/sound is  
seen heard.  
Turn on the TV.  
Properly reconnect the connection cords. (See pages 11 - 13.)  
The picture is disrupted when the image  
is fast forwarded or fast reversed.  
The picture is slightly disrupted during fast forward and fast reverse operations.  
This is not a malfunction.  
No sound is heard.  
Properly connect the audio cords. (See pages 13.)  
Set the sound volume to an appropriate level.  
The player is in a special playback mode. Press the [ ] key to resume normal play-  
£
back mode.  
No picture is displayed.  
Setting to progressive mode has been done for a TV not compatible with progres-  
sive mode. (See pages 17.)  
The picture does not look good or the  
picture/sound quality is poor.  
A nearby device is generating noise. Separate this unit as far as possible from the  
device you think is generating the noise.  
Refer to the "Care and storage of disc" section and wipe dirt from the disc. (See  
page 10.)  
Refer to the "Be careful against condensation" section and evaporate the conden-  
sation. (See page 10.)  
It takes a while for the disc to start play-  
ing.  
Time is required for the unit to detect the disc type and size and for the rotation of  
the motor to stabilize. This is not a malfunction. Approximately 10 to 20 seconds  
are required for a disc to start playing, although the time differs depending on the  
disc.  
The tray opens automatically.  
Properly place the disc on the tray.  
The top and bottom of the screen cannot  
be seen, or the screen becomes black-  
and-white.  
Refer to the "Video formats" section, and use a disc with the appropriate video for-  
mat for your TV or a TV with the appropriate video format for the disc. (See page 9.)  
The subtitle is not displayed.  
The subtitle cannot be displayed when the DVD disc being played does not contain  
the recording of subtitles.  
Press the [SUBTITLE] key to switch on the subtitle mode.  
The voice (or subtitle) language cannot  
be changed.  
The voice (or subtitle) language cannot be changed when the DVD disc being  
played does not contain the recording of more than one voice (or subtitle) lan-  
guage.  
The viewing angle cannot be changed.  
The viewing angle cannot be changed when the DVD disc being played does not  
contain the recording of more than one angle.  
More than one viewing angle may be recorded only in limited sections in a disc.  
Playback will not start even after a title  
is selected.  
Check the viewing restriction level (Rating) setting. (See page 18.)  
The parental level cannot be changed.  
You have forgotten the password. Set the initial setup to the factory setup with the  
following procedure.  
Press the [SETUP] key on the remote to display the Setup menu.  
Input the 6-digits number "210499" and the password is cleared.  
Enter a new code. (See page 18.)  
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
32  
Symptom  
Remedy  
The voice or subtitle language selected  
in the initial setting is not played.  
Use a DVD disc containing the recording of the selected voice or subtitle language.  
Press [SUBTITLE] or the [AUDIO] key on the remote and select the language.  
The DVD specifications provide for selection at the menu screen. Select at the  
menu screen of the disc.  
Menu screen messages are not shown in  
the desired language.  
Select disc menu language. (See page 17.)  
A VCD cannot be played using menus.  
Menu playback is available only with VCD discs recorded with P.B.C.  
Remote control unit  
Symptom  
Remedy  
Remote control operation is not pos-  
sible.  
Replace with new batteries. (See page 15.)  
Operate the unit inside the remote controllable range. (See page 15.)  
Inhibition icon  
Symptom  
Remedy  
Playback is restricted intentionally by the software producer. Please try another  
operation.  
The inhibition icon is displayed  
and remote control is not pos-  
sible.  
This product incorporates copyright protection technol-  
ogy that is protected by U.S. patents and other intellectual  
property rights. Use of this copyright protection technol-  
ogy must be authorized by Macrovision, and is intended for  
home and other limited viewing uses only unless otherwise  
authorized by Macrovision. Reverse engineering or disas-  
sembly is prohibited.  
Manufactured under license from Dolby Laboratories.  
"Dolby" and the double-D symbol are trademarks of Dolby  
Laboratories.  
"DTS" and "DTS Digital Out" are registered  
trademarks of DTS, Inc.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINI-  
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS  
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN  
THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER  
SWITCH THE CONNECTION TO THE "STANDARD DEFINITION"  
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525P AND 625P DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.  
DivX, DivX Certified, and associated logos are trademarks of  
DivX, Inc. and are used under license.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
33  
Specifications  
[Type]  
System...................................................................DVD video player  
Laser................................................................ Semiconductorlaser  
[Audio Block]  
Frequency response  
Sampling frequency ; 44.1 kHz............................ 8 Hz ~ 20 kHz  
Sampling frequency ; 48 kHz................................ 8 Hz ~ 22 kHz  
Sampling frequency ; 96 kHz............................... 8 Hz ~ 44 kHz  
Signal to noise ratio ........................................... More than 100 dB  
Dynamic range.......................................................More than 90 dB  
Total harmonic distortion .....................Less than 0.015 % (1 kHz)  
Analog output level/impedance................................... 2 V / 330 Ω  
Digital output level/impedance  
COAXIAL ............................................................... 0.5 Vp-p / 75 Ω  
[Video Block]  
Video output format  
Europe and Australia................................................ NTSC/PAL  
Except for Europe and Australia ..................................... NTSC  
Composite video output level................................ 1 Vp-p (75 Ω)  
S-video output level (Except for Europe)  
(Y-signal)............................................................... 1 Vp-p (75 Ω)  
(C-signal)  
NTSC......................................................... 0.286 Vp-p (75 Ω)  
PAL ........................................................... 0.300 Vp-p (75 Ω)  
Component Video output level  
(Y-signal)............................................................... 1 Vp-p (75 Ω)  
(CB-signal) .........................................................0.7 Vp-p (75 Ω)  
(CR-signal) .........................................................0.7 Vp-p (75 Ω)  
RGB output level (SCART) (For Europe) ..............0.7 Vp-p (75 Ω)  
Horizontal resolution.................................. More than 500 lines  
Video signal to noise ratio ................................More than 68 dB  
[General]  
Power consumption................................................................. 8 W  
Standby power consumption .............................Less than 0.5 W  
Dimensions..........................................Width: 440 mm (17-5/16")  
Height: 41 mm (1-5/8")  
Depth: 204 mm (8-1/16")  
Weight (net) ............................................................. 1.5 kg (3.3 Ib)  
÷
÷
Design and specifications are subject to change without notice.  
Full performance is not guaranteed in extremely cold environ-  
ments (under water-freezing temperatures).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
35  
For your records  
Record the serial number, found on the back of the unit, in the spaces  
designated on the warranty card, and in the space provided below.  
Refer to the model and serial numbers whenever you call upon your  
dealer for information or service on this product.  
Model  
Serial Number  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia CRT Television NS LCD32 User Manual
Insignia Flat Panel Television NS 32LCD User Manual
IOGear Network Router GWA502 User Manual
JVC Car Stereo System F540R User Manual
JVC Stereo System 0409WMKMDWJMM User Manual
Kenmore Dishwasher 665 7436 User Manual
Kenwood Stereo Amplifier KM 896 User Manual
KitchenAid Cooktop KECC507GAL3 User Manual
KitchenAid Range KERS807 User Manual
Korg Musical Instrument C 320 User Manual